initial_commit

1 files changed, 951 insertions, 0 deletions

diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
new file mode 100644
index 00000000..8c3112a5
--- /dev/null
+++ b/arch/powerpc/kernel/prom.c
@@ -0,0 +1,951 @@
+/*
+ * Procedures for creating, accessing and interpreting the device tree.
+ *
+ * Paul Mackerras	August 1996.
+ * Copyright (C) 1996-2005 Paul Mackerras.
+ * 
+ *  Adapted for 64bit PowerPC by Dave Engebretsen and Peter Bergner.
+ *    {engebret|bergner}@us.ibm.com 
+ *
+ *      This program is free software; you can redistribute it and/or
+ *      modify it under the terms of the GNU General Public License
+ *      as published by the Free Software Foundation; either version
+ *      2 of the License, or (at your option) any later version.
+ */
+
+#undef DEBUG
+
+#include <stdarg.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/init.h>
+#include <linux/threads.h>
+#include <linux/spinlock.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/stringify.h>
+#include <linux/delay.h>
+#include <linux/initrd.h>
+#include <linux/bitops.h>
+#include <linux/module.h>
+#include <linux/kexec.h>
+#include <linux/debugfs.h>
+#include <linux/irq.h>
+#include <linux/memblock.h>
+
+#include <asm/prom.h>
+#include <asm/rtas.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/irq.h>
+#include <asm/io.h>
+#include <asm/kdump.h>
+#include <asm/smp.h>
+#include <asm/system.h>
+#include <asm/mmu.h>
+#include <asm/paca.h>
+#include <asm/pgtable.h>
+#include <asm/pci.h>
+#include <asm/iommu.h>
+#include <asm/btext.h>
+#include <asm/sections.h>
+#include <asm/machdep.h>
+#include <asm/pSeries_reconfig.h>
+#include <asm/pci-bridge.h>
+#include <asm/phyp_dump.h>
+#include <asm/kexec.h>
+#include <mm/mmu_decl.h>
+
+#ifdef DEBUG
+#define DBG(fmt...) printk(KERN_ERR fmt)
+#else
+#define DBG(fmt...)
+#endif
+
+#ifdef CONFIG_PPC64
+int __initdata iommu_is_off;
+int __initdata iommu_force_on;
+unsigned long tce_alloc_start, tce_alloc_end;
+u64 ppc64_rma_size;
+#endif
+static phys_addr_t first_memblock_size;
+
+static int __init early_parse_mem(char *p)
+{
+	if (!p)
+		return 1;
+
+	memory_limit = PAGE_ALIGN(memparse(p, &p));
+	DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
+
+	return 0;
+}
+early_param("mem", early_parse_mem);
+
+/*
+ * overlaps_initrd - check for overlap with page aligned extension of
+ * initrd.
+ */
+static inline int overlaps_initrd(unsigned long start, unsigned long size)
+{
+#ifdef CONFIG_BLK_DEV_INITRD
+	if (!initrd_start)
+		return 0;
+
+	return	(start + size) > _ALIGN_DOWN(initrd_start, PAGE_SIZE) &&
+			start <= _ALIGN_UP(initrd_end, PAGE_SIZE);
+#else
+	return 0;
+#endif
+}
+
+/**
+ * move_device_tree - move tree to an unused area, if needed.
+ *
+ * The device tree may be allocated beyond our memory limit, or inside the
+ * crash kernel region for kdump, or within the page aligned range of initrd.
+ * If so, move it out of the way.
+ */
+static void __init move_device_tree(void)
+{
+	unsigned long start, size;
+	void *p;
+
+	DBG("-> move_device_tree\n");
+
+	start = __pa(initial_boot_params);
+	size = be32_to_cpu(initial_boot_params->totalsize);
+
+	if ((memory_limit && (start + size) > PHYSICAL_START + memory_limit) ||
+			overlaps_crashkernel(start, size) ||
+			overlaps_initrd(start, size)) {
+		p = __va(memblock_alloc(size, PAGE_SIZE));
+		memcpy(p, initial_boot_params, size);
+		initial_boot_params = (struct boot_param_header *)p;
+		DBG("Moved device tree to 0x%p\n", p);
+	}
+
+	DBG("<- move_device_tree\n");
+}
+
+/*
+ * ibm,pa-features is a per-cpu property that contains a string of
+ * attribute descriptors, each of which has a 2 byte header plus up
+ * to 254 bytes worth of processor attribute bits.  First header
+ * byte specifies the number of bytes following the header.
+ * Second header byte is an "attribute-specifier" type, of which
+ * zero is the only currently-defined value.
+ * Implementation:  Pass in the byte and bit offset for the feature
+ * that we are interested in.  The function will return -1 if the
+ * pa-features property is missing, or a 1/0 to indicate if the feature
+ * is supported/not supported.  Note that the bit numbers are
+ * big-endian to match the definition in PAPR.
+ */
+static struct ibm_pa_feature {
+	unsigned long	cpu_features;	/* CPU_FTR_xxx bit */
+	unsigned long	mmu_features;	/* MMU_FTR_xxx bit */
+	unsigned int	cpu_user_ftrs;	/* PPC_FEATURE_xxx bit */
+	unsigned char	pabyte;		/* byte number in ibm,pa-features */
+	unsigned char	pabit;		/* bit number (big-endian) */
+	unsigned char	invert;		/* if 1, pa bit set => clear feature */
+} ibm_pa_features[] __initdata = {
+	{0, 0, PPC_FEATURE_HAS_MMU,	0, 0, 0},
+	{0, 0, PPC_FEATURE_HAS_FPU,	0, 1, 0},
+	{0, MMU_FTR_SLB, 0,		0, 2, 0},
+	{CPU_FTR_CTRL, 0, 0,		0, 3, 0},
+	{CPU_FTR_NOEXECUTE, 0, 0,	0, 6, 0},
+	{CPU_FTR_NODSISRALIGN, 0, 0,	1, 1, 1},
+	{0, MMU_FTR_CI_LARGE_PAGE, 0,	1, 2, 0},
+	{CPU_FTR_REAL_LE, PPC_FEATURE_TRUE_LE, 5, 0, 0},
+};
+
+static void __init scan_features(unsigned long node, unsigned char *ftrs,
+				 unsigned long tablelen,
+				 struct ibm_pa_feature *fp,
+				 unsigned long ft_size)
+{
+	unsigned long i, len, bit;
+
+	/* find descriptor with type == 0 */
+	for (;;) {
+		if (tablelen < 3)
+			return;
+		len = 2 + ftrs[0];
+		if (tablelen < len)
+			return;		/* descriptor 0 not found */
+		if (ftrs[1] == 0)
+			break;
+		tablelen -= len;
+		ftrs += len;
+	}
+
+	/* loop over bits we know about */
+	for (i = 0; i < ft_size; ++i, ++fp) {
+		if (fp->pabyte >= ftrs[0])
+			continue;
+		bit = (ftrs[2 + fp->pabyte] >> (7 - fp->pabit)) & 1;
+		if (bit ^ fp->invert) {
+			cur_cpu_spec->cpu_features |= fp->cpu_features;
+			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftrs;
+			cur_cpu_spec->mmu_features |= fp->mmu_features;
+		} else {
+			cur_cpu_spec->cpu_features &= ~fp->cpu_features;
+			cur_cpu_spec->cpu_user_features &= ~fp->cpu_user_ftrs;
+			cur_cpu_spec->mmu_features &= ~fp->mmu_features;
+		}
+	}
+}
+
+static void __init check_cpu_pa_features(unsigned long node)
+{
+	unsigned char *pa_ftrs;
+	unsigned long tablelen;
+
+	pa_ftrs = of_get_flat_dt_prop(node, "ibm,pa-features", &tablelen);
+	if (pa_ftrs == NULL)
+		return;
+
+	scan_features(node, pa_ftrs, tablelen,
+		      ibm_pa_features, ARRAY_SIZE(ibm_pa_features));
+}
+
+#ifdef CONFIG_PPC_STD_MMU_64
+static void __init check_cpu_slb_size(unsigned long node)
+{
+	u32 *slb_size_ptr;
+
+	slb_size_ptr = of_get_flat_dt_prop(node, "slb-size", NULL);
+	if (slb_size_ptr != NULL) {
+		mmu_slb_size = *slb_size_ptr;
+		return;
+	}
+	slb_size_ptr = of_get_flat_dt_prop(node, "ibm,slb-size", NULL);
+	if (slb_size_ptr != NULL) {
+		mmu_slb_size = *slb_size_ptr;
+	}
+}
+#else
+#define check_cpu_slb_size(node) do { } while(0)
+#endif
+
+static struct feature_property {
+	const char *name;
+	u32 min_value;
+	unsigned long cpu_feature;
+	unsigned long cpu_user_ftr;
+} feature_properties[] __initdata = {
+#ifdef CONFIG_ALTIVEC
+	{"altivec", 0, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+	{"ibm,vmx", 1, CPU_FTR_ALTIVEC, PPC_FEATURE_HAS_ALTIVEC},
+#endif /* CONFIG_ALTIVEC */
+#ifdef CONFIG_VSX
+	/* Yes, this _really_ is ibm,vmx == 2 to enable VSX */
+	{"ibm,vmx", 2, CPU_FTR_VSX, PPC_FEATURE_HAS_VSX},
+#endif /* CONFIG_VSX */
+#ifdef CONFIG_PPC64
+	{"ibm,dfp", 1, 0, PPC_FEATURE_HAS_DFP},
+	{"ibm,purr", 1, CPU_FTR_PURR, 0},
+	{"ibm,spurr", 1, CPU_FTR_SPURR, 0},
+#endif /* CONFIG_PPC64 */
+};
+
+#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU)
+static inline void identical_pvr_fixup(unsigned long node)
+{
+	unsigned int pvr;
+	char *model = of_get_flat_dt_prop(node, "model", NULL);
+
+	/*
+	 * Since 440GR(x)/440EP(x) processors have the same pvr,
+	 * we check the node path and set bit 28 in the cur_cpu_spec
+	 * pvr for EP(x) processor version. This bit is always 0 in
+	 * the "real" pvr. Then we call identify_cpu again with
+	 * the new logical pvr to enable FPU support.
+	 */
+	if (model && strstr(model, "440EP")) {
+		pvr = cur_cpu_spec->pvr_value | 0x8;
+		identify_cpu(0, pvr);
+		DBG("Using logical pvr %x for %s\n", pvr, model);
+	}
+}
+#else
+#define identical_pvr_fixup(node) do { } while(0)
+#endif
+
+static void __init check_cpu_feature_properties(unsigned long node)
+{
+	unsigned long i;
+	struct feature_property *fp = feature_properties;
+	const u32 *prop;
+
+	for (i = 0; i < ARRAY_SIZE(feature_properties); ++i, ++fp) {
+		prop = of_get_flat_dt_prop(node, fp->name, NULL);
+		if (prop && *prop >= fp->min_value) {
+			cur_cpu_spec->cpu_features |= fp->cpu_feature;
+			cur_cpu_spec->cpu_user_features |= fp->cpu_user_ftr;
+		}
+	}
+}
+
+static int __init early_init_dt_scan_cpus(unsigned long node,
+					  const char *uname, int depth,
+					  void *data)
+{
+	char *type = of_get_flat_dt_prop(node, "device_type", NULL);
+	const u32 *prop;
+	const u32 *intserv;
+	int i, nthreads;
+	unsigned long len;
+	int found = -1;
+	int found_thread = 0;
+
+	/* We are scanning "cpu" nodes only */
+	if (type == NULL || strcmp(type, "cpu") != 0)
+		return 0;
+
+	/* Get physical cpuid */
+	intserv = of_get_flat_dt_prop(node, "ibm,ppc-interrupt-server#s", &len);
+	if (intserv) {
+		nthreads = len / sizeof(int);
+	} else {
+		intserv = of_get_flat_dt_prop(node, "reg", NULL);
+		nthreads = 1;
+	}
+
+	/*
+	 * Now see if any of these threads match our boot cpu.
+	 * NOTE: This must match the parsing done in smp_setup_cpu_maps.
+	 */
+	for (i = 0; i < nthreads; i++) {
+		/*
+		 * version 2 of the kexec param format adds the phys cpuid of
+		 * booted proc.
+		 */
+		if (initial_boot_params->version >= 2) {
+			if (intserv[i] == initial_boot_params->boot_cpuid_phys) {
+				found = boot_cpu_count;
+				found_thread = i;
+			}
+		} else {
+			/*
+			 * Check if it's the boot-cpu, set it's hw index now,
+			 * unfortunately this format did not support booting
+			 * off secondary threads.
+			 */
+			if (of_get_flat_dt_prop(node,
+					"linux,boot-cpu", NULL) != NULL)
+				found = boot_cpu_count;
+		}
+#ifdef CONFIG_SMP
+		/* logical cpu id is always 0 on UP kernels */
+		boot_cpu_count++;
+#endif
+	}
+
+	if (found >= 0) {
+		DBG("boot cpu: logical %d physical %d\n", found,
+			intserv[found_thread]);
+		boot_cpuid = found;
+		set_hard_smp_processor_id(found, intserv[found_thread]);
+
+		/*
+		 * PAPR defines "logical" PVR values for cpus that
+		 * meet various levels of the architecture:
+		 * 0x0f000001	Architecture version 2.04
+		 * 0x0f000002	Architecture version 2.05
+		 * If the cpu-version property in the cpu node contains
+		 * such a value, we call identify_cpu again with the
+		 * logical PVR value in order to use the cpu feature
+		 * bits appropriate for the architecture level.
+		 *
+		 * A POWER6 partition in "POWER6 architected" mode
+		 * uses the 0x0f000002 PVR value; in POWER5+ mode
+		 * it uses 0x0f000001.
+		 */
+		prop = of_get_flat_dt_prop(node, "cpu-version", NULL);
+		if (prop && (*prop & 0xff000000) == 0x0f000000)
+			identify_cpu(0, *prop);
+
+		identical_pvr_fixup(node);
+	}
+
+	check_cpu_feature_properties(node);
+	check_cpu_pa_features(node);
+	check_cpu_slb_size(node);
+
+#ifdef CONFIG_PPC_PSERIES
+	if (nthreads > 1)
+		cur_cpu_spec->cpu_features |= CPU_FTR_SMT;
+	else
+		cur_cpu_spec->cpu_features &= ~CPU_FTR_SMT;
+#endif
+
+	return 0;
+}
+
+int __init early_init_dt_scan_chosen_ppc(unsigned long node, const char *uname,
+					 int depth, void *data)
+{
+	unsigned long *lprop;
+
+	/* Use common scan routine to determine if this is the chosen node */
+	if (early_init_dt_scan_chosen(node, uname, depth, data) == 0)
+		return 0;
+
+#ifdef CONFIG_PPC64
+	/* check if iommu is forced on or off */
+	if (of_get_flat_dt_prop(node, "linux,iommu-off", NULL) != NULL)
+		iommu_is_off = 1;
+	if (of_get_flat_dt_prop(node, "linux,iommu-force-on", NULL) != NULL)
+		iommu_force_on = 1;
+#endif
+
+	/* mem=x on the command line is the preferred mechanism */
+	lprop = of_get_flat_dt_prop(node, "linux,memory-limit", NULL);
+	if (lprop)
+		memory_limit = *lprop;
+
+#ifdef CONFIG_PPC64
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-start", NULL);
+	if (lprop)
+		tce_alloc_start = *lprop;
+	lprop = of_get_flat_dt_prop(node, "linux,tce-alloc-end", NULL);
+	if (lprop)
+		tce_alloc_end = *lprop;
+#endif
+
+#ifdef CONFIG_KEXEC
+	lprop = of_get_flat_dt_prop(node, "linux,crashkernel-base", NULL);
+	if (lprop)
+		crashk_res.start = *lprop;
+
+	lprop = of_get_flat_dt_prop(node, "linux,crashkernel-size", NULL);
+	if (lprop)
+		crashk_res.end = crashk_res.start + *lprop - 1;
+#endif
+
+	/* break now */
+	return 1;
+}
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Interpret the ibm,dynamic-memory property in the
+ * /ibm,dynamic-reconfiguration-memory node.
+ * This contains a list of memory blocks along with NUMA affinity
+ * information.
+ */
+static int __init early_init_dt_scan_drconf_memory(unsigned long node)
+{
+	__be32 *dm, *ls, *usm;
+	unsigned long l, n, flags;
+	u64 base, size, memblock_size;
+	unsigned int is_kexec_kdump = 0, rngs;
+
+	ls = of_get_flat_dt_prop(node, "ibm,lmb-size", &l);
+	if (ls == NULL || l < dt_root_size_cells * sizeof(__be32))
+		return 0;
+	memblock_size = dt_mem_next_cell(dt_root_size_cells, &ls);
+
+	dm = of_get_flat_dt_prop(node, "ibm,dynamic-memory", &l);
+	if (dm == NULL || l < sizeof(__be32))
+		return 0;
+
+	n = *dm++;	/* number of entries */
+	if (l < (n * (dt_root_addr_cells + 4) + 1) * sizeof(__be32))
+		return 0;
+
+	/* check if this is a kexec/kdump kernel. */
+	usm = of_get_flat_dt_prop(node, "linux,drconf-usable-memory",
+						 &l);
+	if (usm != NULL)
+		is_kexec_kdump = 1;
+
+	for (; n != 0; --n) {
+		base = dt_mem_next_cell(dt_root_addr_cells, &dm);
+		flags = dm[3];
+		/* skip DRC index, pad, assoc. list index, flags */
+		dm += 4;
+		/* skip this block if the reserved bit is set in flags (0x80)
+		   or if the block is not assigned to this partition (0x8) */
+		if ((flags & 0x80) || !(flags & 0x8))
+			continue;
+		size = memblock_size;
+		rngs = 1;
+		if (is_kexec_kdump) {
+			/*
+			 * For each memblock in ibm,dynamic-memory, a corresponding
+			 * entry in linux,drconf-usable-memory property contains
+			 * a counter 'p' followed by 'p' (base, size) duple.
+			 * Now read the counter from
+			 * linux,drconf-usable-memory property
+			 */
+			rngs = dt_mem_next_cell(dt_root_size_cells, &usm);
+			if (!rngs) /* there are no (base, size) duple */
+				continue;
+		}
+		do {
+			if (is_kexec_kdump) {
+				base = dt_mem_next_cell(dt_root_addr_cells,
+							 &usm);
+				size = dt_mem_next_cell(dt_root_size_cells,
+							 &usm);
+			}
+			if (iommu_is_off) {
+				if (base >= 0x80000000ul)
+					continue;
+				if ((base + size) > 0x80000000ul)
+					size = 0x80000000ul - base;
+			}
+			memblock_add(base, size);
+		} while (--rngs);
+	}
+	memblock_dump_all();
+	return 0;
+}
+#else
+#define early_init_dt_scan_drconf_memory(node)	0
+#endif /* CONFIG_PPC_PSERIES */
+
+static int __init early_init_dt_scan_memory_ppc(unsigned long node,
+						const char *uname,
+						int depth, void *data)
+{
+	if (depth == 1 &&
+	    strcmp(uname, "ibm,dynamic-reconfiguration-memory") == 0)
+		return early_init_dt_scan_drconf_memory(node);
+	
+	return early_init_dt_scan_memory(node, uname, depth, data);
+}
+
+void __init early_init_dt_add_memory_arch(u64 base, u64 size)
+{
+#ifdef CONFIG_PPC64
+	if (iommu_is_off) {
+		if (base >= 0x80000000ul)
+			return;
+		if ((base + size) > 0x80000000ul)
+			size = 0x80000000ul - base;
+	}
+#endif
+	/* Keep track of the beginning of memory -and- the size of
+	 * the very first block in the device-tree as it represents
+	 * the RMA on ppc64 server
+	 */
+	if (base < memstart_addr) {
+		memstart_addr = base;
+		first_memblock_size = size;
+	}
+
+	/* Add the chunk to the MEMBLOCK list */
+	memblock_add(base, size);
+}
+
+void * __init early_init_dt_alloc_memory_arch(u64 size, u64 align)
+{
+	return __va(memblock_alloc(size, align));
+}
+
+#ifdef CONFIG_BLK_DEV_INITRD
+void __init early_init_dt_setup_initrd_arch(unsigned long start,
+		unsigned long end)
+{
+	initrd_start = (unsigned long)__va(start);
+	initrd_end = (unsigned long)__va(end);
+	initrd_below_start_ok = 1;
+}
+#endif
+
+static void __init early_reserve_mem(void)
+{
+	u64 base, size;
+	u64 *reserve_map;
+	unsigned long self_base;
+	unsigned long self_size;
+
+	reserve_map = (u64 *)(((unsigned long)initial_boot_params) +
+					initial_boot_params->off_mem_rsvmap);
+
+	/* before we do anything, lets reserve the dt blob */
+	self_base = __pa((unsigned long)initial_boot_params);
+	self_size = initial_boot_params->totalsize;
+	memblock_reserve(self_base, self_size);
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* then reserve the initrd, if any */
+	if (initrd_start && (initrd_end > initrd_start))
+		memblock_reserve(_ALIGN_DOWN(__pa(initrd_start), PAGE_SIZE),
+			_ALIGN_UP(initrd_end, PAGE_SIZE) -
+			_ALIGN_DOWN(initrd_start, PAGE_SIZE));
+#endif /* CONFIG_BLK_DEV_INITRD */
+
+#ifdef CONFIG_PPC32
+	/* 
+	 * Handle the case where we might be booting from an old kexec
+	 * image that setup the mem_rsvmap as pairs of 32-bit values
+	 */
+	if (*reserve_map > 0xffffffffull) {
+		u32 base_32, size_32;
+		u32 *reserve_map_32 = (u32 *)reserve_map;
+
+		while (1) {
+			base_32 = *(reserve_map_32++);
+			size_32 = *(reserve_map_32++);
+			if (size_32 == 0)
+				break;
+			/* skip if the reservation is for the blob */
+			if (base_32 == self_base && size_32 == self_size)
+				continue;
+			DBG("reserving: %x -> %x\n", base_32, size_32);
+			memblock_reserve(base_32, size_32);
+		}
+		return;
+	}
+#endif
+	while (1) {
+		base = *(reserve_map++);
+		size = *(reserve_map++);
+		if (size == 0)
+			break;
+		DBG("reserving: %llx -> %llx\n", base, size);
+		memblock_reserve(base, size);
+	}
+}
+
+#ifdef CONFIG_PHYP_DUMP
+/**
+ * phyp_dump_calculate_reserve_size() - reserve variable boot area 5% or arg
+ *
+ * Function to find the largest size we need to reserve
+ * during early boot process.
+ *
+ * It either looks for boot param and returns that OR
+ * returns larger of 256 or 5% rounded down to multiples of 256MB.
+ *
+ */
+static inline unsigned long phyp_dump_calculate_reserve_size(void)
+{
+	unsigned long tmp;
+
+	if (phyp_dump_info->reserve_bootvar)
+		return phyp_dump_info->reserve_bootvar;
+
+	/* divide by 20 to get 5% of value */
+	tmp = memblock_end_of_DRAM();
+	do_div(tmp, 20);
+
+	/* round it down in multiples of 256 */
+	tmp = tmp & ~0x0FFFFFFFUL;
+
+	return (tmp > PHYP_DUMP_RMR_END ? tmp : PHYP_DUMP_RMR_END);
+}
+
+/**
+ * phyp_dump_reserve_mem() - reserve all not-yet-dumped mmemory
+ *
+ * This routine may reserve memory regions in the kernel only
+ * if the system is supported and a dump was taken in last
+ * boot instance or if the hardware is supported and the
+ * scratch area needs to be setup. In other instances it returns
+ * without reserving anything. The memory in case of dump being
+ * active is freed when the dump is collected (by userland tools).
+ */
+static void __init phyp_dump_reserve_mem(void)
+{
+	unsigned long base, size;
+	unsigned long variable_reserve_size;
+
+	if (!phyp_dump_info->phyp_dump_configured) {
+		printk(KERN_ERR "Phyp-dump not supported on this hardware\n");
+		return;
+	}
+
+	if (!phyp_dump_info->phyp_dump_at_boot) {
+		printk(KERN_INFO "Phyp-dump disabled at boot time\n");
+		return;
+	}
+
+	variable_reserve_size = phyp_dump_calculate_reserve_size();
+
+	if (phyp_dump_info->phyp_dump_is_active) {
+		/* Reserve *everything* above RMR.Area freed by userland tools*/
+		base = variable_reserve_size;
+		size = memblock_end_of_DRAM() - base;
+
+		/* XXX crashed_ram_end is wrong, since it may be beyond
+		 * the memory_limit, it will need to be adjusted. */
+		memblock_reserve(base, size);
+
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	} else {
+		size = phyp_dump_info->cpu_state_size +
+			phyp_dump_info->hpte_region_size +
+			variable_reserve_size;
+		base = memblock_end_of_DRAM() - size;
+		memblock_reserve(base, size);
+		phyp_dump_info->init_reserve_start = base;
+		phyp_dump_info->init_reserve_size = size;
+	}
+}
+#else
+static inline void __init phyp_dump_reserve_mem(void) {}
+#endif /* CONFIG_PHYP_DUMP  && CONFIG_PPC_RTAS */
+
+void __init early_init_devtree(void *params)
+{
+	phys_addr_t limit;
+
+	DBG(" -> early_init_devtree(%p)\n", params);
+
+	/* Setup flat device-tree pointer */
+	initial_boot_params = params;
+
+#ifdef CONFIG_PPC_RTAS
+	/* Some machines might need RTAS info for debugging, grab it now. */
+	of_scan_flat_dt(early_init_dt_scan_rtas, NULL);
+#endif
+
+#ifdef CONFIG_PHYP_DUMP
+	/* scan tree to see if dump occurred during last boot */
+	of_scan_flat_dt(early_init_dt_scan_phyp_dump, NULL);
+#endif
+
+	/* Retrieve various informations from the /chosen node of the
+	 * device-tree, including the platform type, initrd location and
+	 * size, TCE reserve, and more ...
+	 */
+	of_scan_flat_dt(early_init_dt_scan_chosen_ppc, cmd_line);
+
+	/* Scan memory nodes and rebuild MEMBLOCKs */
+	memblock_init();
+
+	of_scan_flat_dt(early_init_dt_scan_root, NULL);
+	of_scan_flat_dt(early_init_dt_scan_memory_ppc, NULL);
+	setup_initial_memory_limit(memstart_addr, first_memblock_size);
+
+	/* Save command line for /proc/cmdline and then parse parameters */
+	strlcpy(boot_command_line, cmd_line, COMMAND_LINE_SIZE);
+	parse_early_param();
+
+	/* Reserve MEMBLOCK regions used by kernel, initrd, dt, etc... */
+	memblock_reserve(PHYSICAL_START, __pa(klimit) - PHYSICAL_START);
+	/* If relocatable, reserve first 32k for interrupt vectors etc. */
+	if (PHYSICAL_START > MEMORY_START)
+		memblock_reserve(MEMORY_START, 0x8000);
+	reserve_kdump_trampoline();
+	reserve_crashkernel();
+	early_reserve_mem();
+	phyp_dump_reserve_mem();
+
+	limit = memory_limit;
+	if (! limit) {
+		phys_addr_t memsize;
+
+		/* Ensure that total memory size is page-aligned, because
+		 * otherwise mark_bootmem() gets upset. */
+		memblock_analyze();
+		memsize = memblock_phys_mem_size();
+		if ((memsize & PAGE_MASK) != memsize)
+			limit = memsize & PAGE_MASK;
+	}
+	memblock_enforce_memory_limit(limit);
+
+	memblock_analyze();
+	memblock_dump_all();
+
+	DBG("Phys. mem: %llx\n", memblock_phys_mem_size());
+
+	/* We may need to relocate the flat tree, do it now.
+	 * FIXME .. and the initrd too? */
+	move_device_tree();
+
+	allocate_pacas();
+
+	DBG("Scanning CPUs ...\n");
+
+	/* Retrieve CPU related informations from the flat tree
+	 * (altivec support, boot CPU ID, ...)
+	 */
+	of_scan_flat_dt(early_init_dt_scan_cpus, NULL);
+
+	DBG(" <- early_init_devtree()\n");
+}
+
+/*******
+ *
+ * New implementation of the OF "find" APIs, return a refcounted
+ * object, call of_node_put() when done.  The device tree and list
+ * are protected by a rw_lock.
+ *
+ * Note that property management will need some locking as well,
+ * this isn't dealt with yet.
+ *
+ *******/
+
+/**
+ *	of_find_next_cache_node - Find a node's subsidiary cache
+ *	@np:	node of type "cpu" or "cache"
+ *
+ *	Returns a node pointer with refcount incremented, use
+ *	of_node_put() on it when done.  Caller should hold a reference
+ *	to np.
+ */
+struct device_node *of_find_next_cache_node(struct device_node *np)
+{
+	struct device_node *child;
+	const phandle *handle;
+
+	handle = of_get_property(np, "l2-cache", NULL);
+	if (!handle)
+		handle = of_get_property(np, "next-level-cache", NULL);
+
+	if (handle)
+		return of_find_node_by_phandle(*handle);
+
+	/* OF on pmac has nodes instead of properties named "l2-cache"
+	 * beneath CPU nodes.
+	 */
+	if (!strcmp(np->type, "cpu"))
+		for_each_child_of_node(np, child)
+			if (!strcmp(child->type, "cache"))
+				return child;
+
+	return NULL;
+}
+
+#ifdef CONFIG_PPC_PSERIES
+/*
+ * Fix up the uninitialized fields in a new device node:
+ * name, type and pci-specific fields
+ */
+
+static int of_finish_dynamic_node(struct device_node *node)
+{
+	struct device_node *parent = of_get_parent(node);
+	int err = 0;
+	const phandle *ibm_phandle;
+
+	node->name = of_get_property(node, "name", NULL);
+	node->type = of_get_property(node, "device_type", NULL);
+
+	if (!node->name)
+		node->name = "<NULL>";
+	if (!node->type)
+		node->type = "<NULL>";
+
+	if (!parent) {
+		err = -ENODEV;
+		goto out;
+	}
+
+	/* We don't support that function on PowerMac, at least
+	 * not yet
+	 */
+	if (machine_is(powermac))
+		return -ENODEV;
+
+	/* fix up new node's phandle field */
+	if ((ibm_phandle = of_get_property(node, "ibm,phandle", NULL)))
+		node->phandle = *ibm_phandle;
+
+out:
+	of_node_put(parent);
+	return err;
+}
+
+static int prom_reconfig_notifier(struct notifier_block *nb,
+				  unsigned long action, void *node)
+{
+	int err;
+
+	switch (action) {
+	case PSERIES_RECONFIG_ADD:
+		err = of_finish_dynamic_node(node);
+		if (err < 0) {
+			printk(KERN_ERR "finish_node returned %d\n", err);
+			err = NOTIFY_BAD;
+		}
+		break;
+	default:
+		err = NOTIFY_DONE;
+		break;
+	}
+	return err;
+}
+
+static struct notifier_block prom_reconfig_nb = {
+	.notifier_call = prom_reconfig_notifier,
+	.priority = 10, /* This one needs to run first */
+};
+
+static int __init prom_reconfig_setup(void)
+{
+	return pSeries_reconfig_notifier_register(&prom_reconfig_nb);
+}
+__initcall(prom_reconfig_setup);
+#endif
+
+/* Find the device node for a given logical cpu number, also returns the cpu
+ * local thread number (index in ibm,interrupt-server#s) if relevant and
+ * asked for (non NULL)
+ */
+struct device_node *of_get_cpu_node(int cpu, unsigned int *thread)
+{
+	int hardid;
+	struct device_node *np;
+
+	hardid = get_hard_smp_processor_id(cpu);
+
+	for_each_node_by_type(np, "cpu") {
+		const u32 *intserv;
+		unsigned int plen, t;
+
+		/* Check for ibm,ppc-interrupt-server#s. If it doesn't exist
+		 * fallback to "reg" property and assume no threads
+		 */
+		intserv = of_get_property(np, "ibm,ppc-interrupt-server#s",
+				&plen);
+		if (intserv == NULL) {
+			const u32 *reg = of_get_property(np, "reg", NULL);
+			if (reg == NULL)
+				continue;
+			if (*reg == hardid) {
+				if (thread)
+					*thread = 0;
+				return np;
+			}
+		} else {
+			plen /= sizeof(u32);
+			for (t = 0; t < plen; t++) {
+				if (hardid == intserv[t]) {
+					if (thread)
+						*thread = t;
+					return np;
+				}
+			}
+		}
+	}
+	return NULL;
+}
+EXPORT_SYMBOL(of_get_cpu_node);
+
+#if defined(CONFIG_DEBUG_FS) && defined(DEBUG)
+static struct debugfs_blob_wrapper flat_dt_blob;
+
+static int __init export_flat_device_tree(void)
+{
+	struct dentry *d;
+
+	flat_dt_blob.data = initial_boot_params;
+	flat_dt_blob.size = initial_boot_params->totalsize;
+
+	d = debugfs_create_blob("flat-device-tree", S_IFREG | S_IRUSR,
+				powerpc_debugfs_root, &flat_dt_blob);
+	if (!d)
+		return 1;
+
+	return 0;
+}
+__initcall(export_flat_device_tree);
+#endif