diff options
Diffstat (limited to 'arch/arm/mach-omap2/board-3430sdp.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 810 |
1 files changed, 810 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c new file mode 100644 index 00000000..5dac974b --- /dev/null +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -0,0 +1,810 @@ +/* + * linux/arch/arm/mach-omap2/board-3430sdp.c + * + * Copyright (C) 2007 Texas Instruments + * + * Modified from mach-omap2/board-generic.c + * + * Initial code: Syed Mohammed Khasim + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/input/matrix_keypad.h> +#include <linux/spi/spi.h> +#include <linux/i2c/twl.h> +#include <linux/regulator/machine.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/mmc/host.h> + +#include <mach/hardware.h> +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/mcspi.h> +#include <plat/board.h> +#include <plat/usb.h> +#include <plat/common.h> +#include <plat/dma.h> +#include <plat/gpmc.h> +#include <video/omapdss.h> +#include <video/omap-panel-generic-dpi.h> + +#include <plat/gpmc-smc91x.h> + +#include "board-flash.h" +#include "mux.h" +#include "sdram-qimonda-hyb18m512160af-6.h" +#include "hsmmc.h" +#include "pm.h" +#include "control.h" +#include "common-board-devices.h" + +#define CONFIG_DISABLE_HFCLK 1 + +#define SDP3430_TS_GPIO_IRQ_SDPV1 3 +#define SDP3430_TS_GPIO_IRQ_SDPV2 2 + +#define ENABLE_VAUX3_DEDICATED 0x03 +#define ENABLE_VAUX3_DEV_GRP 0x20 + +#define TWL4030_MSECURE_GPIO 22 + +static uint32_t board_keymap[] = { + KEY(0, 0, KEY_LEFT), + KEY(0, 1, KEY_RIGHT), + KEY(0, 2, KEY_A), + KEY(0, 3, KEY_B), + KEY(0, 4, KEY_C), + KEY(1, 0, KEY_DOWN), + KEY(1, 1, KEY_UP), + KEY(1, 2, KEY_E), + KEY(1, 3, KEY_F), + KEY(1, 4, KEY_G), + KEY(2, 0, KEY_ENTER), + KEY(2, 1, KEY_I), + KEY(2, 2, KEY_J), + KEY(2, 3, KEY_K), + KEY(2, 4, KEY_3), + KEY(3, 0, KEY_M), + KEY(3, 1, KEY_N), + KEY(3, 2, KEY_O), + KEY(3, 3, KEY_P), + KEY(3, 4, KEY_Q), + KEY(4, 0, KEY_R), + KEY(4, 1, KEY_4), + KEY(4, 2, KEY_T), + KEY(4, 3, KEY_U), + KEY(4, 4, KEY_D), + KEY(5, 0, KEY_V), + KEY(5, 1, KEY_W), + KEY(5, 2, KEY_L), + KEY(5, 3, KEY_S), + KEY(5, 4, KEY_H), + 0 +}; + +static struct matrix_keymap_data board_map_data = { + .keymap = board_keymap, + .keymap_size = ARRAY_SIZE(board_keymap), +}; + +static struct twl4030_keypad_data sdp3430_kp_data = { + .keymap_data = &board_map_data, + .rows = 5, + .cols = 6, + .rep = 1, +}; + +#define SDP3430_LCD_PANEL_BACKLIGHT_GPIO 8 +#define SDP3430_LCD_PANEL_ENABLE_GPIO 5 + +static struct gpio sdp3430_dss_gpios[] __initdata = { + {SDP3430_LCD_PANEL_ENABLE_GPIO, GPIOF_OUT_INIT_LOW, "LCD reset" }, + {SDP3430_LCD_PANEL_BACKLIGHT_GPIO, GPIOF_OUT_INIT_LOW, "LCD Backlight"}, +}; + +static int lcd_enabled; +static int dvi_enabled; + +static void __init sdp3430_display_init(void) +{ + int r; + + r = gpio_request_array(sdp3430_dss_gpios, + ARRAY_SIZE(sdp3430_dss_gpios)); + if (r) + printk(KERN_ERR "failed to get LCD control GPIOs\n"); + +} + +static int sdp3430_panel_enable_lcd(struct omap_dss_device *dssdev) +{ + if (dvi_enabled) { + printk(KERN_ERR "cannot enable LCD, DVI is enabled\n"); + return -EINVAL; + } + + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 1); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 1); + + lcd_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_lcd(struct omap_dss_device *dssdev) +{ + lcd_enabled = 0; + + gpio_direction_output(SDP3430_LCD_PANEL_ENABLE_GPIO, 0); + gpio_direction_output(SDP3430_LCD_PANEL_BACKLIGHT_GPIO, 0); +} + +static int sdp3430_panel_enable_dvi(struct omap_dss_device *dssdev) +{ + if (lcd_enabled) { + printk(KERN_ERR "cannot enable DVI, LCD is enabled\n"); + return -EINVAL; + } + + dvi_enabled = 1; + + return 0; +} + +static void sdp3430_panel_disable_dvi(struct omap_dss_device *dssdev) +{ + dvi_enabled = 0; +} + +static int sdp3430_panel_enable_tv(struct omap_dss_device *dssdev) +{ + return 0; +} + +static void sdp3430_panel_disable_tv(struct omap_dss_device *dssdev) +{ +} + + +static struct omap_dss_device sdp3430_lcd_device = { + .name = "lcd", + .driver_name = "sharp_ls_panel", + .type = OMAP_DISPLAY_TYPE_DPI, + .phy.dpi.data_lines = 16, + .platform_enable = sdp3430_panel_enable_lcd, + .platform_disable = sdp3430_panel_disable_lcd, +}; + +static struct panel_generic_dpi_data dvi_panel = { + .name = "generic", + .platform_enable = sdp3430_panel_enable_dvi, + .platform_disable = sdp3430_panel_disable_dvi, +}; + +static struct omap_dss_device sdp3430_dvi_device = { + .name = "dvi", + .type = OMAP_DISPLAY_TYPE_DPI, + .driver_name = "generic_dpi_panel", + .data = &dvi_panel, + .phy.dpi.data_lines = 24, +}; + +static struct omap_dss_device sdp3430_tv_device = { + .name = "tv", + .driver_name = "venc", + .type = OMAP_DISPLAY_TYPE_VENC, + .phy.venc.type = OMAP_DSS_VENC_TYPE_SVIDEO, + .platform_enable = sdp3430_panel_enable_tv, + .platform_disable = sdp3430_panel_disable_tv, +}; + + +static struct omap_dss_device *sdp3430_dss_devices[] = { + &sdp3430_lcd_device, + &sdp3430_dvi_device, + &sdp3430_tv_device, +}; + +static struct omap_dss_board_info sdp3430_dss_data = { + .num_devices = ARRAY_SIZE(sdp3430_dss_devices), + .devices = sdp3430_dss_devices, + .default_device = &sdp3430_lcd_device, +}; + +static struct omap_board_config_kernel sdp3430_config[] __initdata = { +}; + +static void __init omap_3430sdp_init_early(void) +{ + omap2_init_common_infrastructure(); + omap2_init_common_devices(hyb18m512160af6_sdrc_params, NULL); +} + +static int sdp3430_batt_table[] = { +/* 0 C*/ +30800, 29500, 28300, 27100, +26000, 24900, 23900, 22900, 22000, 21100, 20300, 19400, 18700, 17900, +17200, 16500, 15900, 15300, 14700, 14100, 13600, 13100, 12600, 12100, +11600, 11200, 10800, 10400, 10000, 9630, 9280, 8950, 8620, 8310, +8020, 7730, 7460, 7200, 6950, 6710, 6470, 6250, 6040, 5830, +5640, 5450, 5260, 5090, 4920, 4760, 4600, 4450, 4310, 4170, +4040, 3910, 3790, 3670, 3550 +}; + +static struct twl4030_bci_platform_data sdp3430_bci_data = { + .battery_tmp_tbl = sdp3430_batt_table, + .tblsize = ARRAY_SIZE(sdp3430_batt_table), +}; + +static struct omap2_hsmmc_info mmc[] = { + { + .mmc = 1, + /* 8 bits (default) requires S6.3 == ON, + * so the SIM card isn't used; else 4 bits. + */ + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_wp = 4, + }, + { + .mmc = 2, + .caps = MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA, + .gpio_wp = 7, + }, + {} /* Terminator */ +}; + +static int sdp3430_twl_gpio_setup(struct device *dev, + unsigned gpio, unsigned ngpio) +{ + /* gpio + 0 is "mmc0_cd" (input/IRQ), + * gpio + 1 is "mmc1_cd" (input/IRQ) + */ + mmc[0].gpio_cd = gpio + 0; + mmc[1].gpio_cd = gpio + 1; + omap2_hsmmc_init(mmc); + + /* gpio + 7 is "sub_lcd_en_bkl" (output/PWM1) */ + gpio_request_one(gpio + 7, GPIOF_OUT_INIT_LOW, "sub_lcd_en_bkl"); + + /* gpio + 15 is "sub_lcd_nRST" (output) */ + gpio_request_one(gpio + 15, GPIOF_OUT_INIT_LOW, "sub_lcd_nRST"); + + return 0; +} + +static struct twl4030_gpio_platform_data sdp3430_gpio_data = { + .gpio_base = OMAP_MAX_GPIO_LINES, + .irq_base = TWL4030_GPIO_IRQ_BASE, + .irq_end = TWL4030_GPIO_IRQ_END, + .pulldowns = BIT(2) | BIT(6) | BIT(8) | BIT(13) + | BIT(16) | BIT(17), + .setup = sdp3430_twl_gpio_setup, +}; + +static struct twl4030_usb_data sdp3430_usb_data = { + .usb_mode = T2_USB_MODE_ULPI, +}; + +static struct twl4030_madc_platform_data sdp3430_madc_data = { + .irq_line = 1, +}; + +/* regulator consumer mappings */ + +/* ads7846 on SPI */ +static struct regulator_consumer_supply sdp3430_vaux3_supplies[] = { + REGULATOR_SUPPLY("vcc", "spi1.0"), +}; + +static struct regulator_consumer_supply sdp3430_vdda_dac_supplies[] = { + REGULATOR_SUPPLY("vdda_dac", "omapdss_venc"), +}; + +/* VPLL2 for digital video outputs */ +static struct regulator_consumer_supply sdp3430_vpll2_supplies[] = { + REGULATOR_SUPPLY("vdds_dsi", "omapdss"), + REGULATOR_SUPPLY("vdds_dsi", "omapdss_dsi1"), +}; + +static struct regulator_consumer_supply sdp3430_vmmc1_supplies[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), +}; + +static struct regulator_consumer_supply sdp3430_vsim_supplies[] = { + REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.0"), +}; + +static struct regulator_consumer_supply sdp3430_vmmc2_supplies[] = { + REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), +}; + +/* + * Apply all the fixed voltages since most versions of U-Boot + * don't bother with that initialization. + */ + +/* VAUX1 for mainboard (irda and sub-lcd) */ +static struct regulator_init_data sdp3430_vaux1 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX2 for camera module */ +static struct regulator_init_data sdp3430_vaux2 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VAUX3 for LCD board */ +static struct regulator_init_data sdp3430_vaux3 = { + .constraints = { + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vaux3_supplies), + .consumer_supplies = sdp3430_vaux3_supplies, +}; + +/* VAUX4 for OMAP VDD_CSI2 (camera) */ +static struct regulator_init_data sdp3430_vaux4 = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, +}; + +/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ +static struct regulator_init_data sdp3430_vmmc1 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 3150000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc1_supplies), + .consumer_supplies = sdp3430_vmmc1_supplies, +}; + +/* VMMC2 for MMC2 card */ +static struct regulator_init_data sdp3430_vmmc2 = { + .constraints = { + .min_uV = 1850000, + .max_uV = 1850000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vmmc2_supplies), + .consumer_supplies = sdp3430_vmmc2_supplies, +}; + +/* VSIM for OMAP VDD_MMC1A (i/o for DAT4..DAT7) */ +static struct regulator_init_data sdp3430_vsim = { + .constraints = { + .min_uV = 1800000, + .max_uV = 3000000, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE + | REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vsim_supplies), + .consumer_supplies = sdp3430_vsim_supplies, +}; + +/* VDAC for DSS driving S-Video */ +static struct regulator_init_data sdp3430_vdac = { + .constraints = { + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vdda_dac_supplies), + .consumer_supplies = sdp3430_vdda_dac_supplies, +}; + +static struct regulator_init_data sdp3430_vpll2 = { + .constraints = { + .name = "VDVI", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = true, + .valid_modes_mask = REGULATOR_MODE_NORMAL + | REGULATOR_MODE_STANDBY, + .valid_ops_mask = REGULATOR_CHANGE_MODE + | REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = ARRAY_SIZE(sdp3430_vpll2_supplies), + .consumer_supplies = sdp3430_vpll2_supplies, +}; + +static struct twl4030_codec_audio_data sdp3430_audio; + +static struct twl4030_codec_data sdp3430_codec = { + .audio_mclk = 26000000, + .audio = &sdp3430_audio, +}; + +static struct twl4030_platform_data sdp3430_twldata = { + .irq_base = TWL4030_IRQ_BASE, + .irq_end = TWL4030_IRQ_END, + + /* platform_data for children goes here */ + .bci = &sdp3430_bci_data, + .gpio = &sdp3430_gpio_data, + .madc = &sdp3430_madc_data, + .keypad = &sdp3430_kp_data, + .usb = &sdp3430_usb_data, + .codec = &sdp3430_codec, + + .vaux1 = &sdp3430_vaux1, + .vaux2 = &sdp3430_vaux2, + .vaux3 = &sdp3430_vaux3, + .vaux4 = &sdp3430_vaux4, + .vmmc1 = &sdp3430_vmmc1, + .vmmc2 = &sdp3430_vmmc2, + .vsim = &sdp3430_vsim, + .vdac = &sdp3430_vdac, + .vpll2 = &sdp3430_vpll2, +}; + +static int __init omap3430_i2c_init(void) +{ + /* i2c1 for PMIC only */ + omap3_pmic_init("twl4030", &sdp3430_twldata); + /* i2c2 on camera connector (for sensor control) and optional isp1301 */ + omap_register_i2c_bus(2, 400, NULL, 0); + /* i2c3 on display connector (for DVI, tfp410) */ + omap_register_i2c_bus(3, 400, NULL, 0); + return 0; +} + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + +static struct omap_smc91x_platform_data board_smc91x_data = { + .cs = 3, + .flags = GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 | + IORESOURCE_IRQ_LOWLEVEL, +}; + +static void __init board_smc91x_init(void) +{ + if (omap_rev() > OMAP3430_REV_ES1_0) + board_smc91x_data.gpio_irq = 6; + else + board_smc91x_data.gpio_irq = 29; + + gpmc_smc91x_init(&board_smc91x_data); +} + +#else + +static inline void board_smc91x_init(void) +{ +} + +#endif + +static void enable_board_wakeup_source(void) +{ + /* T2 interrupt line (keypad) */ + omap_mux_init_signal("sys_nirq", + OMAP_WAKEUP_EN | OMAP_PIN_INPUT_PULLUP); +} + +static const struct usbhs_omap_board_data usbhs_bdata __initconst = { + + .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, + .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED, + + .phy_reset = true, + .reset_gpio_port[0] = 57, + .reset_gpio_port[1] = 61, + .reset_gpio_port[2] = -EINVAL +}; + +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; + +static struct omap_device_pad serial1_pads[] __initdata = { + /* + * Note that off output enable is an active low + * signal. So setting this means pin is a + * input enabled in off mode + */ + OMAP_MUX_STATIC("uart1_cts.uart1_cts", + OMAP_PIN_INPUT | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart1_rts.uart1_rts", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart1_rx.uart1_rx", + OMAP_PIN_INPUT | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart1_tx.uart1_tx", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), +}; + +static struct omap_device_pad serial2_pads[] __initdata = { + OMAP_MUX_STATIC("uart2_cts.uart2_cts", + OMAP_PIN_INPUT_PULLUP | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_rts.uart2_rts", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_rx.uart2_rx", + OMAP_PIN_INPUT | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart2_tx.uart2_tx", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), +}; + +static struct omap_device_pad serial3_pads[] __initdata = { + OMAP_MUX_STATIC("uart3_cts_rctx.uart3_cts_rctx", + OMAP_PIN_INPUT_PULLDOWN | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_rts_sd.uart3_rts_sd", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_rx_irrx.uart3_rx_irrx", + OMAP_PIN_INPUT | + OMAP_PIN_OFF_INPUT_PULLDOWN | + OMAP_OFFOUT_EN | + OMAP_MUX_MODE0), + OMAP_MUX_STATIC("uart3_tx_irtx.uart3_tx_irtx", + OMAP_PIN_OUTPUT | + OMAP_OFF_EN | + OMAP_MUX_MODE0), +}; + +static struct omap_board_data serial1_data __initdata = { + .id = 0, + .pads = serial1_pads, + .pads_cnt = ARRAY_SIZE(serial1_pads), +}; + +static struct omap_board_data serial2_data __initdata = { + .id = 1, + .pads = serial2_pads, + .pads_cnt = ARRAY_SIZE(serial2_pads), +}; + +static struct omap_board_data serial3_data __initdata = { + .id = 2, + .pads = serial3_pads, + .pads_cnt = ARRAY_SIZE(serial3_pads), +}; + +static inline void board_serial_init(void) +{ + omap_serial_init_port(&serial1_data); + omap_serial_init_port(&serial2_data); + omap_serial_init_port(&serial3_data); +} +#else +#define board_mux NULL + +static inline void board_serial_init(void) +{ + omap_serial_init(); +} +#endif + +/* + * SDP3430 V2 Board CS organization + * Different from SDP3430 V1. Now 4 switches used to specify CS + * + * See also the Switch S8 settings in the comments. + */ +static char chip_sel_3430[][GPMC_CS_NUM] = { + {PDC_NOR, PDC_NAND, PDC_ONENAND, DBG_MPDB, 0, 0, 0, 0}, /* S8:1111 */ + {PDC_ONENAND, PDC_NAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1110 */ + {PDC_NAND, PDC_ONENAND, PDC_NOR, DBG_MPDB, 0, 0, 0, 0}, /* S8:1101 */ +}; + +static struct mtd_partition sdp_nor_partitions[] = { + /* bootloader (U-Boot, etc) in first sector */ + { + .name = "Bootloader-NOR", + .offset = 0, + .size = SZ_256K, + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + /* bootloader params in the next sector */ + { + .name = "Params-NOR", + .offset = MTDPART_OFS_APPEND, + .size = SZ_256K, + .mask_flags = 0, + }, + /* kernel */ + { + .name = "Kernel-NOR", + .offset = MTDPART_OFS_APPEND, + .size = SZ_2M, + .mask_flags = 0 + }, + /* file system */ + { + .name = "Filesystem-NOR", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + .mask_flags = 0 + } +}; + +static struct mtd_partition sdp_onenand_partitions[] = { + { + .name = "X-Loader-OneNAND", + .offset = 0, + .size = 4 * (64 * 2048), + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "U-Boot-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 2 * (64 * 2048), + .mask_flags = MTD_WRITEABLE /* force read-only */ + }, + { + .name = "U-Boot Environment-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 1 * (64 * 2048), + }, + { + .name = "Kernel-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = 16 * (64 * 2048), + }, + { + .name = "File System-OneNAND", + .offset = MTDPART_OFS_APPEND, + .size = MTDPART_SIZ_FULL, + }, +}; + +static struct mtd_partition sdp_nand_partitions[] = { + /* All the partition sizes are listed in terms of NAND block size */ + { + .name = "X-Loader-NAND", + .offset = 0, + .size = 4 * (64 * 2048), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "U-Boot-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */ + .size = 10 * (64 * 2048), + .mask_flags = MTD_WRITEABLE, /* force read-only */ + }, + { + .name = "Boot Env-NAND", + + .offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */ + .size = 6 * (64 * 2048), + }, + { + .name = "Kernel-NAND", + .offset = MTDPART_OFS_APPEND, /* Offset = 0x280000 */ + .size = 40 * (64 * 2048), + }, + { + .name = "File System - NAND", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, /* Offset = 0x780000 */ + }, +}; + +static struct flash_partitions sdp_flash_partitions[] = { + { + .parts = sdp_nor_partitions, + .nr_parts = ARRAY_SIZE(sdp_nor_partitions), + }, + { + .parts = sdp_onenand_partitions, + .nr_parts = ARRAY_SIZE(sdp_onenand_partitions), + }, + { + .parts = sdp_nand_partitions, + .nr_parts = ARRAY_SIZE(sdp_nand_partitions), + }, +}; + +static void __init omap_3430sdp_init(void) +{ + int gpio_pendown; + + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); + omap_board_config = sdp3430_config; + omap_board_config_size = ARRAY_SIZE(sdp3430_config); + omap3430_i2c_init(); + omap_display_init(&sdp3430_dss_data); + if (omap_rev() > OMAP3430_REV_ES1_0) + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV2; + else + gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1; + omap_ads7846_init(1, gpio_pendown, 310, NULL); + board_serial_init(); + usb_musb_init(NULL); + board_smc91x_init(); + board_flash_init(sdp_flash_partitions, chip_sel_3430, 0); + sdp3430_display_init(); + enable_board_wakeup_source(); + usbhs_init(&usbhs_bdata); +} + +MACHINE_START(OMAP_3430SDP, "OMAP3430 3430SDP board") + /* Maintainer: Syed Khasim - Texas Instruments Inc */ + .boot_params = 0x80000100, + .reserve = omap_reserve, + .map_io = omap3_map_io, + .init_early = omap_3430sdp_init_early, + .init_irq = omap_init_irq, + .init_machine = omap_3430sdp_init, + .timer = &omap_timer, +MACHINE_END |