diff options
Diffstat (limited to 'arch/arm/mach-ux500/cpu-db8500.c')
-rw-r--r-- | arch/arm/mach-ux500/cpu-db8500.c | 207 |
1 files changed, 207 insertions, 0 deletions
diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c new file mode 100644 index 00000000..4598b06c --- /dev/null +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -0,0 +1,207 @@ +/* + * Copyright (C) 2008-2009 ST-Ericsson + * + * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + */ +#include <linux/types.h> +#include <linux/init.h> +#include <linux/device.h> +#include <linux/amba/bus.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/gpio.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <asm/mach/map.h> +#include <asm/pmu.h> +#include <mach/hardware.h> +#include <mach/setup.h> +#include <mach/devices.h> +#include <mach/usb.h> + +#include "devices-db8500.h" +#include "ste-dma40-db8500.h" + +/* minimum static i/o mapping required to boot U8500 platforms */ +static struct map_desc u8500_uart_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_UART2_BASE, SZ_4K), +}; + +static struct map_desc u8500_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_GIC_CPU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GIC_DIST_BASE, SZ_4K), + __IO_DEV_DESC(U8500_L2CC_BASE, SZ_4K), + __IO_DEV_DESC(U8500_TWD_BASE, SZ_4K), + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_SCU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_BACKUPRAM0_BASE, SZ_8K), + + __IO_DEV_DESC(U8500_CLKRST1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST3_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST5_BASE, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST6_BASE, SZ_4K), + + __IO_DEV_DESC(U8500_PRCMU_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO1_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO2_BASE, SZ_4K), + __IO_DEV_DESC(U8500_GPIO3_BASE, SZ_4K), +}; + +static struct map_desc u8500_ed_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE_ED, SZ_4K), + __IO_DEV_DESC(U8500_CLKRST7_BASE_ED, SZ_8K), +}; + +static struct map_desc u8500_v1_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_MTU0_BASE, SZ_4K), + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE_V1, SZ_4K), +}; + +static struct map_desc u8500_v2_io_desc[] __initdata = { + __IO_DEV_DESC(U8500_PRCMU_TCDM_BASE, SZ_4K), +}; + +void __init u8500_map_io(void) +{ + /* + * Map the UARTs early so that the DEBUG_LL stuff continues to work. + */ + iotable_init(u8500_uart_io_desc, ARRAY_SIZE(u8500_uart_io_desc)); + + ux500_map_io(); + + iotable_init(u8500_io_desc, ARRAY_SIZE(u8500_io_desc)); + + if (cpu_is_u8500ed()) + iotable_init(u8500_ed_io_desc, ARRAY_SIZE(u8500_ed_io_desc)); + else if (cpu_is_u8500v1()) + iotable_init(u8500_v1_io_desc, ARRAY_SIZE(u8500_v1_io_desc)); + else if (cpu_is_u8500v2()) + iotable_init(u8500_v2_io_desc, ARRAY_SIZE(u8500_v2_io_desc)); + + _PRCMU_BASE = __io_address(U8500_PRCMU_BASE); +} + +static struct resource db8500_pmu_resources[] = { + [0] = { + .start = IRQ_DB8500_PMU, + .end = IRQ_DB8500_PMU, + .flags = IORESOURCE_IRQ, + }, +}; + +/* + * The PMU IRQ lines of two cores are wired together into a single interrupt. + * Bounce the interrupt to the other core if it's not ours. + */ +static irqreturn_t db8500_pmu_handler(int irq, void *dev, irq_handler_t handler) +{ + irqreturn_t ret = handler(irq, dev); + int other = !smp_processor_id(); + + if (ret == IRQ_NONE && cpu_online(other)) + irq_set_affinity(irq, cpumask_of(other)); + + /* + * We should be able to get away with the amount of IRQ_NONEs we give, + * while still having the spurious IRQ detection code kick in if the + * interrupt really starts hitting spuriously. + */ + return ret; +} + +static struct arm_pmu_platdata db8500_pmu_platdata = { + .handle_irq = db8500_pmu_handler, +}; + +static struct platform_device db8500_pmu_device = { + .name = "arm-pmu", + .id = ARM_PMU_DEVICE_CPU, + .num_resources = ARRAY_SIZE(db8500_pmu_resources), + .resource = db8500_pmu_resources, + .dev.platform_data = &db8500_pmu_platdata, +}; + +static struct platform_device db8500_prcmu_device = { + .name = "db8500-prcmu", +}; + +static struct platform_device *platform_devs[] __initdata = { + &u8500_dma40_device, + &db8500_pmu_device, + &db8500_prcmu_device, +}; + +static resource_size_t __initdata db8500_gpio_base[] = { + U8500_GPIOBANK0_BASE, + U8500_GPIOBANK1_BASE, + U8500_GPIOBANK2_BASE, + U8500_GPIOBANK3_BASE, + U8500_GPIOBANK4_BASE, + U8500_GPIOBANK5_BASE, + U8500_GPIOBANK6_BASE, + U8500_GPIOBANK7_BASE, + U8500_GPIOBANK8_BASE, +}; + +static void __init db8500_add_gpios(void) +{ + struct nmk_gpio_platform_data pdata = { + /* No custom data yet */ + }; + + if (cpu_is_u8500v2()) + pdata.supports_sleepmode = true; + + dbx500_add_gpios(ARRAY_AND_SIZE(db8500_gpio_base), + IRQ_DB8500_GPIO0, &pdata); +} + +static int usb_db8500_rx_dma_cfg[] = { + DB8500_DMA_DEV38_USB_OTG_IEP_1_9, + DB8500_DMA_DEV37_USB_OTG_IEP_2_10, + DB8500_DMA_DEV36_USB_OTG_IEP_3_11, + DB8500_DMA_DEV19_USB_OTG_IEP_4_12, + DB8500_DMA_DEV18_USB_OTG_IEP_5_13, + DB8500_DMA_DEV17_USB_OTG_IEP_6_14, + DB8500_DMA_DEV16_USB_OTG_IEP_7_15, + DB8500_DMA_DEV39_USB_OTG_IEP_8 +}; + +static int usb_db8500_tx_dma_cfg[] = { + DB8500_DMA_DEV38_USB_OTG_OEP_1_9, + DB8500_DMA_DEV37_USB_OTG_OEP_2_10, + DB8500_DMA_DEV36_USB_OTG_OEP_3_11, + DB8500_DMA_DEV19_USB_OTG_OEP_4_12, + DB8500_DMA_DEV18_USB_OTG_OEP_5_13, + DB8500_DMA_DEV17_USB_OTG_OEP_6_14, + DB8500_DMA_DEV16_USB_OTG_OEP_7_15, + DB8500_DMA_DEV39_USB_OTG_OEP_8 +}; + +/* + * This function is called from the board init + */ +void __init u8500_init_devices(void) +{ + if (cpu_is_u8500ed()) + dma40_u8500ed_fixup(); + + db8500_add_rtc(); + db8500_add_gpios(); + db8500_add_usb(usb_db8500_rx_dma_cfg, usb_db8500_tx_dma_cfg); + + platform_device_register_simple("cpufreq-u8500", -1, NULL, 0); + platform_add_devices(platform_devs, ARRAY_SIZE(platform_devs)); + + return ; +} |