diff options
Diffstat (limited to 'arch/powerpc/mm/fsl_booke_mmu.c')
| -rw-r--r-- | arch/powerpc/mm/fsl_booke_mmu.c | 230 |
1 files changed, 230 insertions, 0 deletions
diff --git a/arch/powerpc/mm/fsl_booke_mmu.c b/arch/powerpc/mm/fsl_booke_mmu.c new file mode 100644 index 00000000..f7802c8b --- /dev/null +++ b/arch/powerpc/mm/fsl_booke_mmu.c @@ -0,0 +1,230 @@ +/* + * Modifications by Kumar Gala (galak@kernel.crashing.org) to support + * E500 Book E processors. + * + * Copyright 2004,2010 Freescale Semiconductor, Inc. + * + * This file contains the routines for initializing the MMU + * on the 4xx series of chips. + * -- paulus + * + * Derived from arch/ppc/mm/init.c: + * Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org) + * + * Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au) + * and Cort Dougan (PReP) (cort@cs.nmt.edu) + * Copyright (C) 1996 Paul Mackerras + * + * Derived from "arch/i386/mm/init.c" + * Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + * + */ + +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/types.h> +#include <linux/ptrace.h> +#include <linux/mman.h> +#include <linux/mm.h> +#include <linux/swap.h> +#include <linux/stddef.h> +#include <linux/vmalloc.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <linux/highmem.h> +#include <linux/memblock.h> + +#include <asm/pgalloc.h> +#include <asm/prom.h> +#include <asm/io.h> +#include <asm/mmu_context.h> +#include <asm/pgtable.h> +#include <asm/mmu.h> +#include <asm/uaccess.h> +#include <asm/smp.h> +#include <asm/machdep.h> +#include <asm/setup.h> + +#include "mmu_decl.h" + +unsigned int tlbcam_index; + +#define NUM_TLBCAMS (64) +struct tlbcam TLBCAM[NUM_TLBCAMS]; + +struct tlbcamrange { + unsigned long start; + unsigned long limit; + phys_addr_t phys; +} tlbcam_addrs[NUM_TLBCAMS]; + +extern unsigned int tlbcam_index; + +unsigned long tlbcam_sz(int idx) +{ + return tlbcam_addrs[idx].limit - tlbcam_addrs[idx].start + 1; +} + +/* + * Return PA for this VA if it is mapped by a CAM, or 0 + */ +phys_addr_t v_mapped_by_tlbcam(unsigned long va) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (va >= tlbcam_addrs[b].start && va < tlbcam_addrs[b].limit) + return tlbcam_addrs[b].phys + (va - tlbcam_addrs[b].start); + return 0; +} + +/* + * Return VA for a given PA or 0 if not mapped + */ +unsigned long p_mapped_by_tlbcam(phys_addr_t pa) +{ + int b; + for (b = 0; b < tlbcam_index; ++b) + if (pa >= tlbcam_addrs[b].phys + && pa < (tlbcam_addrs[b].limit-tlbcam_addrs[b].start) + +tlbcam_addrs[b].phys) + return tlbcam_addrs[b].start+(pa-tlbcam_addrs[b].phys); + return 0; +} + +/* + * Set up a variable-size TLB entry (tlbcam). The parameters are not checked; + * in particular size must be a power of 4 between 4k and 256M (or 1G, for cpus + * that support extended page sizes). Note that while some cpus support a + * page size of 4G, we don't allow its use here. + */ +static void settlbcam(int index, unsigned long virt, phys_addr_t phys, + unsigned long size, unsigned long flags, unsigned int pid) +{ + unsigned int tsize, lz; + + asm (PPC_CNTLZL "%0,%1" : "=r" (lz) : "r" (size)); + tsize = 21 - lz; + +#ifdef CONFIG_SMP + if ((flags & _PAGE_NO_CACHE) == 0) + flags |= _PAGE_COHERENT; +#endif + + TLBCAM[index].MAS0 = MAS0_TLBSEL(1) | MAS0_ESEL(index) | MAS0_NV(index+1); + TLBCAM[index].MAS1 = MAS1_VALID | MAS1_IPROT | MAS1_TSIZE(tsize) | MAS1_TID(pid); + TLBCAM[index].MAS2 = virt & PAGE_MASK; + + TLBCAM[index].MAS2 |= (flags & _PAGE_WRITETHRU) ? MAS2_W : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_NO_CACHE) ? MAS2_I : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_COHERENT) ? MAS2_M : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_GUARDED) ? MAS2_G : 0; + TLBCAM[index].MAS2 |= (flags & _PAGE_ENDIAN) ? MAS2_E : 0; + + TLBCAM[index].MAS3 = (phys & MAS3_RPN) | MAS3_SX | MAS3_SR; + TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_SW : 0); + if (mmu_has_feature(MMU_FTR_BIG_PHYS)) + TLBCAM[index].MAS7 = (u64)phys >> 32; + + /* Below is unlikely -- only for large user pages or similar */ + if (pte_user(flags)) { + TLBCAM[index].MAS3 |= MAS3_UX | MAS3_UR; + TLBCAM[index].MAS3 |= ((flags & _PAGE_RW) ? MAS3_UW : 0); + } + + tlbcam_addrs[index].start = virt; + tlbcam_addrs[index].limit = virt + size - 1; + tlbcam_addrs[index].phys = phys; + + loadcam_entry(index); +} + +unsigned long map_mem_in_cams(unsigned long ram, int max_cam_idx) +{ + int i; + unsigned long virt = PAGE_OFFSET; + phys_addr_t phys = memstart_addr; + unsigned long amount_mapped = 0; + unsigned long max_cam = (mfspr(SPRN_TLB1CFG) >> 16) & 0xf; + + /* Convert (4^max) kB to (2^max) bytes */ + max_cam = max_cam * 2 + 10; + + /* Calculate CAM values */ + for (i = 0; ram && i < max_cam_idx; i++) { + unsigned int camsize = __ilog2(ram) & ~1U; + unsigned int align = __ffs(virt | phys) & ~1U; + unsigned long cam_sz; + + if (camsize > align) + camsize = align; + if (camsize > max_cam) + camsize = max_cam; + + cam_sz = 1UL << camsize; + settlbcam(i, virt, phys, cam_sz, PAGE_KERNEL_X, 0); + + ram -= cam_sz; + amount_mapped += cam_sz; + virt += cam_sz; + phys += cam_sz; + } + tlbcam_index = i; + + return amount_mapped; +} + +#ifdef CONFIG_PPC32 + +#if defined(CONFIG_LOWMEM_CAM_NUM_BOOL) && (CONFIG_LOWMEM_CAM_NUM >= NUM_TLBCAMS) +#error "LOWMEM_CAM_NUM must be less than NUM_TLBCAMS" +#endif + +unsigned long __init mmu_mapin_ram(unsigned long top) +{ + return tlbcam_addrs[tlbcam_index - 1].limit - PAGE_OFFSET + 1; +} + +/* + * MMU_init_hw does the chip-specific initialization of the MMU hardware. + */ +void __init MMU_init_hw(void) +{ + flush_instruction_cache(); +} + +void __init adjust_total_lowmem(void) +{ + unsigned long ram; + int i; + + /* adjust lowmem size to __max_low_memory */ + ram = min((phys_addr_t)__max_low_memory, (phys_addr_t)total_lowmem); + + __max_low_memory = map_mem_in_cams(ram, CONFIG_LOWMEM_CAM_NUM); + + pr_info("Memory CAM mapping: "); + for (i = 0; i < tlbcam_index - 1; i++) + pr_cont("%lu/", tlbcam_sz(i) >> 20); + pr_cont("%lu Mb, residual: %dMb\n", tlbcam_sz(tlbcam_index - 1) >> 20, + (unsigned int)((total_lowmem - __max_low_memory) >> 20)); + + memblock_set_current_limit(memstart_addr + __max_low_memory); +} + +void setup_initial_memory_limit(phys_addr_t first_memblock_base, + phys_addr_t first_memblock_size) +{ + phys_addr_t limit = first_memblock_base + first_memblock_size; + + /* 64M mapped initially according to head_fsl_booke.S */ + memblock_set_current_limit(min_t(u64, limit, 0x04000000)); +} +#endif |