diff options
Diffstat (limited to 'arch/powerpc/platforms/86xx/mpc8610_hpcd.c')
| -rw-r--r-- | arch/powerpc/platforms/86xx/mpc8610_hpcd.c | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/86xx/mpc8610_hpcd.c b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c new file mode 100644 index 00000000..a8965116 --- /dev/null +++ b/arch/powerpc/platforms/86xx/mpc8610_hpcd.c @@ -0,0 +1,383 @@ +/* + * MPC8610 HPCD board specific routines + * + * Initial author: Xianghua Xiao <x.xiao@freescale.com> + * Recode: Jason Jin <jason.jin@freescale.com> + * York Sun <yorksun@freescale.com> + * + * Rewrite the interrupt routing. remove the 8259PIC support, + * All the integrated device in ULI use sideband interrupt. + * + * Copyright 2008 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/stddef.h> +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/interrupt.h> +#include <linux/kdev_t.h> +#include <linux/delay.h> +#include <linux/seq_file.h> +#include <linux/of.h> + +#include <asm/system.h> +#include <asm/time.h> +#include <asm/machdep.h> +#include <asm/pci-bridge.h> +#include <asm/prom.h> +#include <mm/mmu_decl.h> +#include <asm/udbg.h> + +#include <asm/mpic.h> + +#include <linux/of_platform.h> +#include <sysdev/fsl_pci.h> +#include <sysdev/fsl_soc.h> +#include <sysdev/simple_gpio.h> + +#include "mpc86xx.h" + +static struct device_node *pixis_node; +static unsigned char *pixis_bdcfg0, *pixis_arch; + +#ifdef CONFIG_SUSPEND +static irqreturn_t mpc8610_sw9_irq(int irq, void *data) +{ + pr_debug("%s: PIXIS' event (sw9/wakeup) IRQ handled\n", __func__); + return IRQ_HANDLED; +} + +static void __init mpc8610_suspend_init(void) +{ + int irq; + int ret; + + if (!pixis_node) + return; + + irq = irq_of_parse_and_map(pixis_node, 0); + if (!irq) { + pr_err("%s: can't map pixis event IRQ.\n", __func__); + return; + } + + ret = request_irq(irq, mpc8610_sw9_irq, 0, "sw9:wakeup", NULL); + if (ret) { + pr_err("%s: can't request pixis event IRQ: %d\n", + __func__, ret); + irq_dispose_mapping(irq); + } + + enable_irq_wake(irq); +} +#else +static inline void mpc8610_suspend_init(void) { } +#endif /* CONFIG_SUSPEND */ + +static struct of_device_id __initdata mpc8610_ids[] = { + { .compatible = "fsl,mpc8610-immr", }, + { .compatible = "fsl,mpc8610-guts", }, + { .compatible = "simple-bus", }, + /* So that the DMA channel nodes can be probed individually: */ + { .compatible = "fsl,eloplus-dma", }, + {} +}; + +static int __init mpc8610_declare_of_platform_devices(void) +{ + /* Firstly, register PIXIS GPIOs. */ + simple_gpiochip_init("fsl,fpga-pixis-gpio-bank"); + + /* Enable wakeup on PIXIS' event IRQ. */ + mpc8610_suspend_init(); + + /* Without this call, the SSI device driver won't get probed. */ + of_platform_bus_probe(NULL, mpc8610_ids, NULL); + + return 0; +} +machine_device_initcall(mpc86xx_hpcd, mpc8610_declare_of_platform_devices); + +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + +/* + * DIU Area Descriptor + * + * The MPC8610 reference manual shows the bits of the AD register in + * little-endian order, which causes the BLUE_C field to be split into two + * parts. To simplify the definition of the MAKE_AD() macro, we define the + * fields in big-endian order and byte-swap the result. + * + * So even though the registers don't look like they're in the + * same bit positions as they are on the P1022, the same value is written to + * the AD register on the MPC8610 and on the P1022. + */ +#define AD_BYTE_F 0x10000000 +#define AD_ALPHA_C_MASK 0x0E000000 +#define AD_ALPHA_C_SHIFT 25 +#define AD_BLUE_C_MASK 0x01800000 +#define AD_BLUE_C_SHIFT 23 +#define AD_GREEN_C_MASK 0x00600000 +#define AD_GREEN_C_SHIFT 21 +#define AD_RED_C_MASK 0x00180000 +#define AD_RED_C_SHIFT 19 +#define AD_PALETTE 0x00040000 +#define AD_PIXEL_S_MASK 0x00030000 +#define AD_PIXEL_S_SHIFT 16 +#define AD_COMP_3_MASK 0x0000F000 +#define AD_COMP_3_SHIFT 12 +#define AD_COMP_2_MASK 0x00000F00 +#define AD_COMP_2_SHIFT 8 +#define AD_COMP_1_MASK 0x000000F0 +#define AD_COMP_1_SHIFT 4 +#define AD_COMP_0_MASK 0x0000000F +#define AD_COMP_0_SHIFT 0 + +#define MAKE_AD(alpha, red, blue, green, size, c0, c1, c2, c3) \ + cpu_to_le32(AD_BYTE_F | (alpha << AD_ALPHA_C_SHIFT) | \ + (blue << AD_BLUE_C_SHIFT) | (green << AD_GREEN_C_SHIFT) | \ + (red << AD_RED_C_SHIFT) | (c3 << AD_COMP_3_SHIFT) | \ + (c2 << AD_COMP_2_SHIFT) | (c1 << AD_COMP_1_SHIFT) | \ + (c0 << AD_COMP_0_SHIFT) | (size << AD_PIXEL_S_SHIFT)) + +unsigned int mpc8610hpcd_get_pixel_format(unsigned int bits_per_pixel, + int monitor_port) +{ + static const unsigned long pixelformat[][3] = { + { + MAKE_AD(3, 0, 2, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 2, 0, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 0, 2, 1, 1, 5, 6, 5, 0) + }, + { + MAKE_AD(3, 2, 0, 1, 3, 8, 8, 8, 8), + MAKE_AD(4, 0, 2, 1, 2, 8, 8, 8, 0), + MAKE_AD(4, 2, 0, 1, 1, 5, 6, 5, 0) + }, + }; + unsigned int arch_monitor; + + /* The DVI port is mis-wired on revision 1 of this board. */ + arch_monitor = ((*pixis_arch == 0x01) && (monitor_port == 0))? 0 : 1; + + switch (bits_per_pixel) { + case 32: + return pixelformat[arch_monitor][0]; + case 24: + return pixelformat[arch_monitor][1]; + case 16: + return pixelformat[arch_monitor][2]; + default: + pr_err("fsl-diu: unsupported pixel depth %u\n", bits_per_pixel); + return 0; + } +} + +void mpc8610hpcd_set_gamma_table(int monitor_port, char *gamma_table_base) +{ + int i; + if (monitor_port == 2) { /* dual link LVDS */ + for (i = 0; i < 256*3; i++) + gamma_table_base[i] = (gamma_table_base[i] << 2) | + ((gamma_table_base[i] >> 6) & 0x03); + } +} + +#define PX_BRDCFG0_DVISEL (1 << 3) +#define PX_BRDCFG0_DLINK (1 << 4) +#define PX_BRDCFG0_DIU_MASK (PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK) + +void mpc8610hpcd_set_monitor_port(int monitor_port) +{ + static const u8 bdcfg[] = { + PX_BRDCFG0_DVISEL | PX_BRDCFG0_DLINK, + PX_BRDCFG0_DLINK, + 0, + }; + + if (monitor_port < 3) + clrsetbits_8(pixis_bdcfg0, PX_BRDCFG0_DIU_MASK, + bdcfg[monitor_port]); +} + +void mpc8610hpcd_set_pixel_clock(unsigned int pixclock) +{ + u32 __iomem *clkdvdr; + u32 temp; + /* variables for pixel clock calcs */ + ulong bestval, bestfreq, speed_ccb, minpixclock, maxpixclock; + ulong pixval; + long err; + int i; + + clkdvdr = ioremap(get_immrbase() + 0xe0800, sizeof(u32)); + if (!clkdvdr) { + printk(KERN_ERR "Err: can't map clock divider register!\n"); + return; + } + + /* Pixel Clock configuration */ + speed_ccb = fsl_get_sys_freq(); + + /* Calculate the pixel clock with the smallest error */ + /* calculate the following in steps to avoid overflow */ + pr_debug("DIU pixclock in ps - %d\n", pixclock); + temp = 1000000000/pixclock; + temp *= 1000; + pixclock = temp; + pr_debug("DIU pixclock freq - %u\n", pixclock); + + temp = pixclock * 5 / 100; + pr_debug("deviation = %d\n", temp); + minpixclock = pixclock - temp; + maxpixclock = pixclock + temp; + pr_debug("DIU minpixclock - %lu\n", minpixclock); + pr_debug("DIU maxpixclock - %lu\n", maxpixclock); + pixval = speed_ccb/pixclock; + pr_debug("DIU pixval = %lu\n", pixval); + + err = 100000000; + bestval = pixval; + pr_debug("DIU bestval = %lu\n", bestval); + + bestfreq = 0; + for (i = -1; i <= 1; i++) { + temp = speed_ccb / ((pixval+i) + 1); + pr_debug("DIU test pixval i= %d, pixval=%lu, temp freq. = %u\n", + i, pixval, temp); + if ((temp < minpixclock) || (temp > maxpixclock)) + pr_debug("DIU exceeds monitor range (%lu to %lu)\n", + minpixclock, maxpixclock); + else if (abs(temp - pixclock) < err) { + pr_debug("Entered the else if block %d\n", i); + err = abs(temp - pixclock); + bestval = pixval+i; + bestfreq = temp; + } + } + + pr_debug("DIU chose = %lx\n", bestval); + pr_debug("DIU error = %ld\n NomPixClk ", err); + pr_debug("DIU: Best Freq = %lx\n", bestfreq); + /* Modify PXCLK in GUTS CLKDVDR */ + pr_debug("DIU: Current value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + temp = (*clkdvdr) & 0x2000FFFF; + *clkdvdr = temp; /* turn off clock */ + *clkdvdr = temp | 0x80000000 | (((bestval) & 0x1F) << 16); + pr_debug("DIU: Modified value of CLKDVDR = 0x%08x\n", (*clkdvdr)); + iounmap(clkdvdr); +} + +ssize_t mpc8610hpcd_show_monitor_port(int monitor_port, char *buf) +{ + return snprintf(buf, PAGE_SIZE, + "%c0 - DVI\n" + "%c1 - Single link LVDS\n" + "%c2 - Dual link LVDS\n", + monitor_port == 0 ? '*' : ' ', + monitor_port == 1 ? '*' : ' ', + monitor_port == 2 ? '*' : ' '); +} + +int mpc8610hpcd_set_sysfs_monitor_port(int val) +{ + return val < 3 ? val : 0; +} + +#endif + +static void __init mpc86xx_hpcd_setup_arch(void) +{ + struct resource r; + struct device_node *np; + unsigned char *pixis; + + if (ppc_md.progress) + ppc_md.progress("mpc86xx_hpcd_setup_arch()", 0); + +#ifdef CONFIG_PCI + for_each_node_by_type(np, "pci") { + if (of_device_is_compatible(np, "fsl,mpc8610-pci") + || of_device_is_compatible(np, "fsl,mpc8641-pcie")) { + struct resource rsrc; + of_address_to_resource(np, 0, &rsrc); + if ((rsrc.start & 0xfffff) == 0xa000) + fsl_add_bridge(np, 1); + else + fsl_add_bridge(np, 0); + } + } +#endif +#if defined(CONFIG_FB_FSL_DIU) || defined(CONFIG_FB_FSL_DIU_MODULE) + diu_ops.get_pixel_format = mpc8610hpcd_get_pixel_format; + diu_ops.set_gamma_table = mpc8610hpcd_set_gamma_table; + diu_ops.set_monitor_port = mpc8610hpcd_set_monitor_port; + diu_ops.set_pixel_clock = mpc8610hpcd_set_pixel_clock; + diu_ops.show_monitor_port = mpc8610hpcd_show_monitor_port; + diu_ops.set_sysfs_monitor_port = mpc8610hpcd_set_sysfs_monitor_port; +#endif + + pixis_node = of_find_compatible_node(NULL, NULL, "fsl,fpga-pixis"); + if (pixis_node) { + of_address_to_resource(pixis_node, 0, &r); + of_node_put(pixis_node); + pixis = ioremap(r.start, 32); + if (!pixis) { + printk(KERN_ERR "Err: can't map FPGA cfg register!\n"); + return; + } + pixis_bdcfg0 = pixis + 8; + pixis_arch = pixis + 1; + } else + printk(KERN_ERR "Err: " + "can't find device node 'fsl,fpga-pixis'\n"); + + printk("MPC86xx HPCD board from Freescale Semiconductor\n"); +} + +/* + * Called very early, device-tree isn't unflattened + */ +static int __init mpc86xx_hpcd_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (of_flat_dt_is_compatible(root, "fsl,MPC8610HPCD")) + return 1; /* Looks good */ + + return 0; +} + +static long __init mpc86xx_time_init(void) +{ + unsigned int temp; + + /* Set the time base to zero */ + mtspr(SPRN_TBWL, 0); + mtspr(SPRN_TBWU, 0); + + temp = mfspr(SPRN_HID0); + temp |= HID0_TBEN; + mtspr(SPRN_HID0, temp); + asm volatile("isync"); + + return 0; +} + +define_machine(mpc86xx_hpcd) { + .name = "MPC86xx HPCD", + .probe = mpc86xx_hpcd_probe, + .setup_arch = mpc86xx_hpcd_setup_arch, + .init_IRQ = mpc86xx_init_irq, + .get_irq = mpic_get_irq, + .restart = fsl_rstcr_restart, + .time_init = mpc86xx_time_init, + .calibrate_decr = generic_calibrate_decr, + .progress = udbg_progress, + .pcibios_fixup_bus = fsl_pcibios_fixup_bus, +}; |