aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorFelix Fietkau <nbd@openwrt.org>2014-12-13 11:55:04 +0000
committerFelix Fietkau <nbd@openwrt.org>2014-12-13 11:55:04 +0000
commitd36e9ec877c39e04a9fbcf5c3e04c385eac93b2a (patch)
treed58662428939622e77c796264f908aff51dea15b
parent360e7df4c9bb677eb0b5f0d796c69128410abc99 (diff)
downloadmaster-187ad058-d36e9ec877c39e04a9fbcf5c3e04c385eac93b2a.tar.gz
master-187ad058-d36e9ec877c39e04a9fbcf5c3e04c385eac93b2a.tar.bz2
master-187ad058-d36e9ec877c39e04a9fbcf5c3e04c385eac93b2a.zip
ixp4xx: remove linux 3.10 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43686 3c298f89-4303-0410-b956-a3cf2f4a3e73
-rw-r--r--target/linux/ixp4xx/config-3.10222
-rw-r--r--target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch136
-rw-r--r--target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch95
-rw-r--r--target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch423
-rw-r--r--target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch15
-rw-r--r--target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch78
-rw-r--r--target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch261
-rw-r--r--target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch393
-rw-r--r--target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch44
-rw-r--r--target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch286
-rw-r--r--target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch30
-rw-r--r--target/linux/ixp4xx/patches-3.10/120-compex_support.patch199
-rw-r--r--target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch227
-rw-r--r--target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch42
-rw-r--r--target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch72
-rw-r--r--target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch203
-rw-r--r--target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch51
-rw-r--r--target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch121
-rw-r--r--target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch38
-rw-r--r--target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch51
-rw-r--r--target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch2090
-rw-r--r--target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch287
-rw-r--r--target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch507
-rw-r--r--target/linux/ixp4xx/patches-3.10/190-cambria_support.patch1131
-rw-r--r--target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch11
-rw-r--r--target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch13
-rw-r--r--target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch131
-rw-r--r--target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch98
-rw-r--r--target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch154
-rw-r--r--target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch201
-rw-r--r--target/linux/ixp4xx/patches-3.10/300-avila_support.patch726
-rw-r--r--target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch80
-rw-r--r--target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch52
-rw-r--r--target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch50
-rw-r--r--target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch137
-rw-r--r--target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch347
-rw-r--r--target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch317
-rw-r--r--target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch282
-rw-r--r--target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch23
-rw-r--r--target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch10
-rw-r--r--target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch22
41 files changed, 0 insertions, 9656 deletions
diff --git a/target/linux/ixp4xx/config-3.10 b/target/linux/ixp4xx/config-3.10
deleted file mode 100644
index 3e3fdce50c..0000000000
--- a/target/linux/ixp4xx/config-3.10
+++ /dev/null
@@ -1,222 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_ARCH_ADI_COYOTE is not set
-CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_DMA_SET_COHERENT_MASK=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_IXCDP1100=y
-CONFIG_ARCH_IXDP425=y
-CONFIG_ARCH_IXDP4XX=y
-CONFIG_ARCH_IXP4XX=y
-# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set
-CONFIG_ARCH_NR_GPIO=0
-# CONFIG_ARCH_PRPMC1100 is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_BIG_ENDIAN=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARM=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_NR_BANKS=8
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-# CONFIG_ARM_THUMB is not set
-# CONFIG_ARPD is not set
-CONFIG_ATAGS=y
-CONFIG_BOUNCE=y
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_CPU_32v5=y
-CONFIG_CPU_ABRT_EV5T=y
-CONFIG_CPU_BIG_ENDIAN=y
-CONFIG_CPU_CACHE_VIVT=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_ENDIAN_BE32=y
-# CONFIG_CPU_ENDIAN_BE8 is not set
-CONFIG_CPU_IXP43X=y
-CONFIG_CPU_IXP46X=y
-CONFIG_CPU_PABRT_LEGACY=y
-CONFIG_CPU_TLB_V4WBI=y
-CONFIG_CPU_USE_DOMAINS=y
-CONFIG_CPU_XSCALE=y
-CONFIG_DEBUG_BUGVERBOSE=y
-CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S"
-# CONFIG_DEBUG_USER is not set
-CONFIG_DECOMPRESS_LZMA=y
-CONFIG_DMABOUNCE=y
-CONFIG_DNOTIFY=y
-CONFIG_EEPROM_AT24=y
-CONFIG_FRAME_POINTER=y
-CONFIG_GENERIC_ATOMIC64=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GW_I2C_PLD=y
-CONFIG_GPIO_SYSFS=y
-# CONFIG_HAMRADIO is not set
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_AOUT=y
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_GENERIC_HARDIRQS=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_KERNEL_GZIP=y
-CONFIG_HAVE_KERNEL_LZMA=y
-CONFIG_HAVE_KERNEL_LZO=y
-CONFIG_HAVE_KERNEL_XZ=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HWMON=y
-CONFIG_HWMON_VID=y
-CONFIG_HW_RANDOM=y
-CONFIG_HW_RANDOM_IXP4XX=y
-CONFIG_HZ_PERIODIC=y
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_I2C_IOP3XX is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_IRQ_WORK=y
-# CONFIG_IWMMXT is not set
-CONFIG_IXP4XX_ETH=y
-# CONFIG_IXP4XX_INDIRECT_PCI is not set
-CONFIG_IXP4XX_NPE=y
-CONFIG_IXP4XX_QMGR=y
-CONFIG_IXP4XX_WATCHDOG=y
-CONFIG_KTIME_SCALAR=y
-CONFIG_LEDS_FSG=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_LATCH=y
-CONFIG_LEGACY_PTYS=y
-CONFIG_LEGACY_PTY_COUNT=256
-CONFIG_MACH_AP1000=y
-CONFIG_MACH_AP42X=y
-# CONFIG_MACH_ARCOM_VULCAN is not set
-CONFIG_MACH_AVILA=y
-CONFIG_MACH_CAMBRIA=y
-CONFIG_MACH_COMPEXWP18=y
-# CONFIG_MACH_DEVIXP is not set
-CONFIG_MACH_DSMG600=y
-CONFIG_MACH_FSG=y
-CONFIG_MACH_GATEWAY7001=y
-# CONFIG_MACH_GORAMO_MLR is not set
-# CONFIG_MACH_GTWX5715 is not set
-# CONFIG_MACH_IXDP465 is not set
-CONFIG_MACH_IXDPG425=y
-# CONFIG_MACH_KIXRP435 is not set
-CONFIG_MACH_LOFT=y
-CONFIG_MACH_MI424WR=y
-# CONFIG_MACH_MIC256 is not set
-# CONFIG_MACH_MICCPT is not set
-CONFIG_MACH_NAS100D=y
-CONFIG_MACH_NSLU2=y
-CONFIG_MACH_PRONGHORN=y
-CONFIG_MACH_PRONGHORNMETRO=y
-CONFIG_MACH_SIDEWINDER=y
-CONFIG_MACH_TW2662=y
-CONFIG_MACH_TW5334=y
-CONFIG_MACH_USR8200=y
-CONFIG_MACH_WG302V1=y
-CONFIG_MACH_WG302V2=y
-CONFIG_MACH_WRT300NV2=y
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MODULES_USE_ELF_REL=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-# CONFIG_MTD_CFI_GEOMETRY is not set
-CONFIG_MTD_IXP4XX=y
-CONFIG_MTD_OTP=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_MACH_IO_H=y
-CONFIG_NEED_PER_CPU_KM=y
-CONFIG_NET_VENDOR_XSCALE=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PHYLIB=y
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_RCU_STALL_COMMON is not set
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1672=y
-CONFIG_RTC_DRV_ISL1208=y
-CONFIG_RTC_DRV_PCF8563=y
-CONFIG_RTC_DRV_X1205=y
-CONFIG_SCHED_HRTICK=y
-# CONFIG_SCSI_DMA is not set
-CONFIG_SENSORS_AD7418=y
-CONFIG_SENSORS_GSC=y
-CONFIG_SENSORS_MAX6650=y
-CONFIG_SENSORS_W83781D=y
-CONFIG_SERIAL_8250_NR_UARTS=4
-CONFIG_SERIAL_8250_RUNTIME_UARTS=4
-CONFIG_SPLIT_PTLOCK_CPUS=999999
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TICK_CPU_ACCOUNTING=y
-CONFIG_UID16=y
-CONFIG_UIDGID_CONVERTED=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB_ARCH_HAS_XHCI=y
-CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y
-CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y
-CONFIG_USB_SUPPORT=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XSCALE_PMU=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ZBOOT_ROM_TEXT=0x0
diff --git a/target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch b/target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
deleted file mode 100644
index 3c5a6e300e..0000000000
--- a/target/linux/ixp4xx/patches-3.10/001-arm-ixp4xx-set-cohorent_dma_mask-for-ethernet-platfo.patch
+++ /dev/null
@@ -1,136 +0,0 @@
-From 7113f56b683c5123df5c20724ac813cee66fa21a Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Jul 2013 16:49:05 +0200
-Subject: [PATCH 1/2] arm: ixp4xx: set cohorent_dma_mask for ethernet platform
- devices
-
-ARM requires the cohorent_dma_mask set, so set it for the platform
-devices so that the ethernet driver has access to it.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- arch/arm/mach-ixp4xx/fsg-setup.c | 2 ++
- arch/arm/mach-ixp4xx/goramo_mlr.c | 2 ++
- arch/arm/mach-ixp4xx/ixdp425-setup.c | 3 +++
- arch/arm/mach-ixp4xx/nas100d-setup.c | 1 +
- arch/arm/mach-ixp4xx/nslu2-setup.c | 1 +
- arch/arm/mach-ixp4xx/omixp-setup.c | 3 +++
- arch/arm/mach-ixp4xx/vulcan-setup.c | 2 ++
- 7 files changed, 14 insertions(+)
-
---- a/arch/arm/mach-ixp4xx/fsg-setup.c
-+++ b/arch/arm/mach-ixp4xx/fsg-setup.c
-@@ -142,12 +142,14 @@ static struct platform_device fsg_eth[]
- .id = IXP4XX_ETH_NPEB,
- .dev = {
- .platform_data = fsg_plat_eth,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev = {
- .platform_data = fsg_plat_eth + 1,
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- }
- };
---- a/arch/arm/mach-ixp4xx/goramo_mlr.c
-+++ b/arch/arm/mach-ixp4xx/goramo_mlr.c
-@@ -294,10 +294,12 @@ static struct platform_device device_eth
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = eth_plat,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = eth_plat + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/ixdp425-setup.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-setup.c
-@@ -20,6 +20,7 @@
- #include <linux/mtd/nand.h>
- #include <linux/mtd/partitions.h>
- #include <linux/delay.h>
-+#include <linux/dma-mapping.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -195,10 +196,12 @@ static struct platform_device ixdp425_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = ixdp425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = ixdp425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/nas100d-setup.c
-+++ b/arch/arm/mach-ixp4xx/nas100d-setup.c
-@@ -170,6 +170,7 @@ static struct platform_device nas100d_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = nas100d_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/nslu2-setup.c
-+++ b/arch/arm/mach-ixp4xx/nslu2-setup.c
-@@ -182,6 +182,7 @@ static struct platform_device nslu2_eth[
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = nslu2_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }
- };
-
---- a/arch/arm/mach-ixp4xx/omixp-setup.c
-+++ b/arch/arm/mach-ixp4xx/omixp-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial_8250.h>
- #include <linux/mtd/mtd.h>
- #include <linux/mtd/partitions.h>
-+#include <linux/dma-mapping.h>
- #ifdef CONFIG_LEDS_CLASS
- #include <linux/leds.h>
- #endif
-@@ -188,10 +189,12 @@ static struct platform_device ixdp425_et
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEB,
- .dev.platform_data = ixdp425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- }, {
- .name = "ixp4xx_eth",
- .id = IXP4XX_ETH_NPEC,
- .dev.platform_data = ixdp425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
- },
- };
-
---- a/arch/arm/mach-ixp4xx/vulcan-setup.c
-+++ b/arch/arm/mach-ixp4xx/vulcan-setup.c
-@@ -139,6 +139,7 @@ static struct platform_device vulcan_eth
- .id = IXP4XX_ETH_NPEB,
- .dev = {
- .platform_data = &vulcan_plat_eth[0],
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- },
- [1] = {
-@@ -146,6 +147,7 @@ static struct platform_device vulcan_eth
- .id = IXP4XX_ETH_NPEC,
- .dev = {
- .platform_data = &vulcan_plat_eth[1],
-+ .coherent_dma_mask = DMA_BIT_MASK(32),
- },
- },
- };
diff --git a/target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch b/target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
deleted file mode 100644
index add50b5ad6..0000000000
--- a/target/linux/ixp4xx/patches-3.10/002-ixp4xx_eth-use-parent-device-for-dma-allocations.patch
+++ /dev/null
@@ -1,95 +0,0 @@
-From 1d67040af0144c549f4db8144d2ccc253ff8639c Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Mon, 1 Jul 2013 16:39:28 +0200
-Subject: [PATCH 2/2] net: ixp4xx_eth: use parent device for dma allocations
-
-Now that the platfomr device provides a dma_cohorent_mask, use it for
-dma operations.
-
-This fixes ethernet on ixp4xx which was broken since 3.7.
-
-Signed-off-by: Jonas Gorski <jogo@openwrt.org>
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c | 23 ++++++++++++-----------
- 1 file changed, 12 insertions(+), 11 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -641,10 +641,10 @@ static inline void queue_put_desc(unsign
- static inline void dma_unmap_tx(struct port *port, struct desc *desc)
- {
- #ifdef __ARMEB__
-- dma_unmap_single(&port->netdev->dev, desc->data,
-+ dma_unmap_single(port->netdev->dev.parent, desc->data,
- desc->buf_len, DMA_TO_DEVICE);
- #else
-- dma_unmap_single(&port->netdev->dev, desc->data & ~3,
-+ dma_unmap_single(port->netdev->dev.parent, desc->data & ~3,
- ALIGN((desc->data & 3) + desc->buf_len, 4),
- DMA_TO_DEVICE);
- #endif
-@@ -711,9 +711,9 @@ static int eth_poll(struct napi_struct *
-
- #ifdef __ARMEB__
- if ((skb = netdev_alloc_skb(dev, RX_BUFF_SIZE))) {
-- phys = dma_map_single(&dev->dev, skb->data,
-+ phys = dma_map_single(dev->dev.parent, skb->data,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
-- if (dma_mapping_error(&dev->dev, phys)) {
-+ if (dma_mapping_error(dev->dev.parent, phys)) {
- dev_kfree_skb(skb);
- skb = NULL;
- }
-@@ -736,10 +736,11 @@ static int eth_poll(struct napi_struct *
- #ifdef __ARMEB__
- temp = skb;
- skb = port->rx_buff_tab[n];
-- dma_unmap_single(&dev->dev, desc->data - NET_IP_ALIGN,
-+ dma_unmap_single(dev->dev.parent, desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- #else
-- dma_sync_single_for_cpu(&dev->dev, desc->data - NET_IP_ALIGN,
-+ dma_sync_single_for_cpu(dev->dev.parent,
-+ desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- memcpy_swab32((u32 *)skb->data, (u32 *)port->rx_buff_tab[n],
- ALIGN(NET_IP_ALIGN + desc->pkt_len, 4) / 4);
-@@ -858,7 +859,7 @@ static int eth_xmit(struct sk_buff *skb,
- memcpy_swab32(mem, (u32 *)((int)skb->data & ~3), bytes / 4);
- #endif
-
-- phys = dma_map_single(&dev->dev, mem, bytes, DMA_TO_DEVICE);
-+ phys = dma_map_single(dev->dev.parent, mem, bytes, DMA_TO_DEVICE);
- if (dma_mapping_error(&dev->dev, phys)) {
- dev_kfree_skb(skb);
- #ifndef __ARMEB__
-@@ -1104,7 +1105,7 @@ static int init_queues(struct port *port
- int i;
-
- if (!ports_open) {
-- dma_pool = dma_pool_create(DRV_NAME, &port->netdev->dev,
-+ dma_pool = dma_pool_create(DRV_NAME, port->netdev->dev.parent,
- POOL_ALLOC_SIZE, 32, 0);
- if (!dma_pool)
- return -ENOMEM;
-@@ -1132,9 +1133,9 @@ static int init_queues(struct port *port
- data = buff;
- #endif
- desc->buf_len = MAX_MRU;
-- desc->data = dma_map_single(&port->netdev->dev, data,
-+ desc->data = dma_map_single(port->netdev->dev.parent, data,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
-- if (dma_mapping_error(&port->netdev->dev, desc->data)) {
-+ if (dma_mapping_error(port->netdev->dev.parent, desc->data)) {
- free_buffer(buff);
- return -EIO;
- }
-@@ -1154,7 +1155,7 @@ static void destroy_queues(struct port *
- struct desc *desc = rx_desc_ptr(port, i);
- buffer_t *buff = port->rx_buff_tab[i];
- if (buff) {
-- dma_unmap_single(&port->netdev->dev,
-+ dma_unmap_single(port->netdev->dev.parent,
- desc->data - NET_IP_ALIGN,
- RX_BUFF_SIZE, DMA_FROM_DEVICE);
- free_buffer(buff);
diff --git a/target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch b/target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch
deleted file mode 100644
index 8c9e79935b..0000000000
--- a/target/linux/ixp4xx/patches-3.10/020-gateworks_i2c_pld.patch
+++ /dev/null
@@ -1,423 +0,0 @@
---- a/drivers/gpio/Kconfig
-+++ b/drivers/gpio/Kconfig
-@@ -625,6 +625,14 @@ config GPIO_RDC321X
- Support for the RDC R321x SoC GPIOs over southbridge
- PCI configuration space.
-
-+config GPIO_GW_I2C_PLD
-+ tristate "Gateworks I2C PLD GPIO Expander"
-+ depends on I2C
-+ help
-+ Say yes here to provide access to the Gateworks I2C PLD GPIO
-+ Expander. This is used at least on the GW2358-4.
-+
-+
- comment "SPI GPIO expanders:"
-
- config GPIO_MAX7301
---- a/drivers/gpio/Makefile
-+++ b/drivers/gpio/Makefile
-@@ -87,3 +87,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x
- obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o
- obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o
- obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o
-+obj-$(CONFIG_GPIO_GW_I2C_PLD) += gw_i2c_pld.o
---- /dev/null
-+++ b/drivers/gpio/gw_i2c_pld.c
-@@ -0,0 +1,373 @@
-+/*
-+ * Gateworks I2C PLD GPIO expander
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/hardirq.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+#include <asm/gpio.h>
-+
-+static const struct i2c_device_id gw_i2c_pld_id[] = {
-+ { "gw_i2c_pld", 8 },
-+ { }
-+};
-+MODULE_DEVICE_TABLE(i2c, gw_i2c_pld_id);
-+
-+/*
-+ * The Gateworks I2C PLD chip only expose one read and one
-+ * write register. Writing a "one" bit (to match the reset state) lets
-+ * that pin be used as an input. It is an open-drain model.
-+ */
-+
-+struct gw_i2c_pld {
-+ struct gpio_chip chip;
-+ struct i2c_client *client;
-+ unsigned out; /* software latch */
-+};
-+
-+/*-------------------------------------------------------------------------*/
-+
-+/*
-+ * The Gateworks I2C PLD chip does not properly send the acknowledge bit
-+ * thus we cannot use standard i2c_smbus functions. We have recreated
-+ * our own here, but we still use the rt_mutex_lock to lock the i2c_bus
-+ * as the device still exists on the I2C bus.
-+*/
-+
-+#define PLD_SCL_GPIO 6
-+#define PLD_SDA_GPIO 7
-+
-+#define SCL_LO() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_LOW)
-+#define SCL_HI() gpio_line_set(PLD_SCL_GPIO, IXP4XX_GPIO_HIGH)
-+#define SCL_EN() gpio_line_config(PLD_SCL_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_LO() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_LOW)
-+#define SDA_HI() gpio_line_set(PLD_SDA_GPIO, IXP4XX_GPIO_HIGH)
-+#define SDA_EN() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_OUT)
-+#define SDA_DIS() gpio_line_config(PLD_SDA_GPIO, IXP4XX_GPIO_IN)
-+#define SDA_IN(x) gpio_line_get(PLD_SDA_GPIO, &x);
-+
-+static int i2c_pld_write_byte(int address, int byte)
-+{
-+ int i;
-+
-+ address = (address << 1) & ~0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (byte & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+
-+ SDA_HI();
-+ SDA_EN();
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return 0;
-+}
-+
-+static unsigned int i2c_pld_read_byte(int address)
-+{
-+ int i = 0, byte = 0;
-+ int bit;
-+
-+ address = (address << 1) | 0x1;
-+
-+ SDA_HI();
-+ SDA_EN();
-+ SCL_EN();
-+ SCL_HI();
-+ SDA_LO();
-+ SCL_LO();
-+
-+ for (i = 7; i >= 0; i--)
-+ {
-+ if (address & (1 << i))
-+ SDA_HI();
-+ else
-+ SDA_LO();
-+
-+ SCL_HI();
-+ SCL_LO();
-+ }
-+
-+ SDA_DIS();
-+ SCL_HI();
-+ SDA_IN(i);
-+ SCL_LO();
-+ SDA_EN();
-+
-+ SDA_DIS();
-+ for (i = 7; i >= 0; i--)
-+ {
-+ SCL_HI();
-+ SDA_IN(bit);
-+ byte |= bit << i;
-+ SCL_LO();
-+ }
-+
-+ SDA_LO();
-+ SCL_HI();
-+ SDA_HI();
-+ SCL_LO();
-+ SCL_HI();
-+
-+ return byte;
-+}
-+
-+
-+static int gw_i2c_pld_input8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+ gpio->out |= (1 << offset);
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static int gw_i2c_pld_get8(struct gpio_chip *chip, unsigned offset)
-+{
-+ int ret;
-+ s32 value;
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+ value = i2c_pld_read_byte(gpio->client->addr);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return (value < 0) ? 0 : (value & (1 << offset));
-+}
-+
-+static int gw_i2c_pld_output8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ int ret;
-+
-+ struct gw_i2c_pld *gpio = container_of(chip, struct gw_i2c_pld, chip);
-+ struct i2c_adapter *adap = gpio->client->adapter;
-+
-+ unsigned bit = 1 << offset;
-+
-+ if (in_atomic() || irqs_disabled()) {
-+ ret = rt_mutex_trylock(&adap->bus_lock);
-+ if (!ret)
-+ /* I2C activity is ongoing. */
-+ return -EAGAIN;
-+ } else {
-+ rt_mutex_lock(&adap->bus_lock);
-+ }
-+
-+
-+ if (value)
-+ gpio->out |= bit;
-+ else
-+ gpio->out &= ~bit;
-+
-+ ret = i2c_pld_write_byte(gpio->client->addr, gpio->out);
-+
-+ rt_mutex_unlock(&adap->bus_lock);
-+
-+ return ret;
-+}
-+
-+static void gw_i2c_pld_set8(struct gpio_chip *chip, unsigned offset, int value)
-+{
-+ gw_i2c_pld_output8(chip, offset, value);
-+}
-+
-+/*-------------------------------------------------------------------------*/
-+
-+static int gw_i2c_pld_probe(struct i2c_client *client,
-+ const struct i2c_device_id *id)
-+{
-+ struct gw_i2c_pld_platform_data *pdata;
-+ struct gw_i2c_pld *gpio;
-+ int status;
-+
-+ pdata = client->dev.platform_data;
-+ if (!pdata)
-+ return -ENODEV;
-+
-+ /* Allocate, initialize, and register this gpio_chip. */
-+ gpio = kzalloc(sizeof *gpio, GFP_KERNEL);
-+ if (!gpio)
-+ return -ENOMEM;
-+
-+ gpio->chip.base = pdata->gpio_base;
-+ gpio->chip.can_sleep = 1;
-+ gpio->chip.dev = &client->dev;
-+ gpio->chip.owner = THIS_MODULE;
-+
-+ gpio->chip.ngpio = pdata->nr_gpio;
-+ gpio->chip.direction_input = gw_i2c_pld_input8;
-+ gpio->chip.get = gw_i2c_pld_get8;
-+ gpio->chip.direction_output = gw_i2c_pld_output8;
-+ gpio->chip.set = gw_i2c_pld_set8;
-+
-+ gpio->chip.label = client->name;
-+
-+ gpio->client = client;
-+ i2c_set_clientdata(client, gpio);
-+
-+ gpio->out = 0xFF;
-+
-+ status = gpiochip_add(&gpio->chip);
-+ if (status < 0)
-+ goto fail;
-+
-+ dev_info(&client->dev, "gpios %d..%d on a %s%s\n",
-+ gpio->chip.base,
-+ gpio->chip.base + gpio->chip.ngpio - 1,
-+ client->name,
-+ client->irq ? " (irq ignored)" : "");
-+
-+ /* Let platform code set up the GPIOs and their users.
-+ * Now is the first time anyone could use them.
-+ */
-+ if (pdata->setup) {
-+ status = pdata->setup(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0)
-+ dev_warn(&client->dev, "setup --> %d\n", status);
-+ }
-+
-+ return 0;
-+
-+fail:
-+ dev_dbg(&client->dev, "probe error %d for '%s'\n",
-+ status, client->name);
-+ kfree(gpio);
-+ return status;
-+}
-+
-+static int gw_i2c_pld_remove(struct i2c_client *client)
-+{
-+ struct gw_i2c_pld_platform_data *pdata = client->dev.platform_data;
-+ struct gw_i2c_pld *gpio = i2c_get_clientdata(client);
-+ int status = 0;
-+
-+ if (pdata->teardown) {
-+ status = pdata->teardown(client,
-+ gpio->chip.base, gpio->chip.ngpio,
-+ pdata->context);
-+ if (status < 0) {
-+ dev_err(&client->dev, "%s --> %d\n",
-+ "teardown", status);
-+ return status;
-+ }
-+ }
-+
-+ status = gpiochip_remove(&gpio->chip);
-+ if (status == 0)
-+ kfree(gpio);
-+ else
-+ dev_err(&client->dev, "%s --> %d\n", "remove", status);
-+ return status;
-+}
-+
-+static struct i2c_driver gw_i2c_pld_driver = {
-+ .driver = {
-+ .name = "gw_i2c_pld",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_i2c_pld_probe,
-+ .remove = gw_i2c_pld_remove,
-+ .id_table = gw_i2c_pld_id,
-+};
-+
-+static int __init gw_i2c_pld_init(void)
-+{
-+ return i2c_add_driver(&gw_i2c_pld_driver);
-+}
-+module_init(gw_i2c_pld_init);
-+
-+static void __exit gw_i2c_pld_exit(void)
-+{
-+ i2c_del_driver(&gw_i2c_pld_driver);
-+}
-+module_exit(gw_i2c_pld_exit);
-+
-+MODULE_LICENSE("GPL");
-+MODULE_AUTHOR("Chris Lang");
---- /dev/null
-+++ b/include/linux/i2c/gw_i2c_pld.h
-@@ -0,0 +1,20 @@
-+#ifndef __LINUX_GW_I2C_PLD_H
-+#define __LINUX_GW_I2C_PLD_H
-+
-+/**
-+ * The Gateworks I2C PLD Implements an additional 8 bits of GPIO through the PLD
-+ */
-+
-+struct gw_i2c_pld_platform_data {
-+ unsigned gpio_base;
-+ unsigned nr_gpio;
-+ int (*setup)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ int (*teardown)(struct i2c_client *client,
-+ int gpio, unsigned ngpio,
-+ void *context);
-+ void *context;
-+};
-+
-+#endif /* __LINUX_GW_I2C_PLD_H */
diff --git a/target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch
deleted file mode 100644
index 508f96d932..0000000000
--- a/target/linux/ixp4xx/patches-3.10/090-increase_entropy_pools.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/drivers/char/random.c
-+++ b/drivers/char/random.c
-@@ -282,9 +282,9 @@
- /*
- * Configuration information
- */
--#define INPUT_POOL_WORDS 128
--#define OUTPUT_POOL_WORDS 32
--#define SEC_XFER_SIZE 512
-+#define INPUT_POOL_WORDS 256
-+#define OUTPUT_POOL_WORDS 64
-+#define SEC_XFER_SIZE 1024
- #define EXTRACT_SIZE 10
-
- #define LONGS(x) (((x) + sizeof(unsigned long) - 1)/sizeof(unsigned long))
diff --git a/target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch
deleted file mode 100644
index 317103fdab..0000000000
--- a/target/linux/ixp4xx/patches-3.10/100-wg302v2_gateway7001_mac_plat_info.patch
+++ /dev/null
@@ -1,78 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -17,6 +17,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -75,9 +76,37 @@ static struct platform_device gateway700
- .resource = &gateway7001_uart_resource,
- };
-
-+static struct eth_plat_info gateway7001_plat_eth[] = {
-+ {
-+ .phy = 1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 2,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device gateway7001_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = gateway7001_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = gateway7001_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *gateway7001_devices[] __initdata = {
- &gateway7001_flash,
-- &gateway7001_uart
-+ &gateway7001_uart,
-+ &gateway7001_eth[0],
-+ &gateway7001_eth[1],
- };
-
- static void __init gateway7001_init(void)
---- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -76,9 +76,26 @@ static struct platform_device wg302v2_ua
- .resource = &wg302v2_uart_resource,
- };
-
-+static struct eth_plat_info wg302v2_plat_eth[] = {
-+ {
-+ .phy = 8,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v2_plat_eth,
-+ }
-+};
-+
- static struct platform_device *wg302v2_devices[] __initdata = {
- &wg302v2_flash,
- &wg302v2_uart,
-+ &wg302v2_eth[0],
- };
-
- static void __init wg302v2_init(void)
diff --git a/target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch b/target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch
deleted file mode 100644
index 8f14add9af..0000000000
--- a/target/linux/ixp4xx/patches-3.10/105-wg302v1_support.patch
+++ /dev/null
@@ -1,261 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -13,6 +13,7 @@ CONFIG_MACH_AVILA=y
- CONFIG_MACH_LOFT=y
- CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
-+CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
- 7001 Access Point. For more information on this platform,
- see http://openwrt.org
-
-+config MACH_WG302V1
-+ bool "Netgear WG302 v1 / WAG302 v1"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Netgear's
-+ WG302 v1 or WAG302 v1 Access Points. For more information
-+ on this platform, see http://openwrt.org
-+
- config MACH_WG302V2
- bool "Netgear WG302 v2 / WAG302 v2"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
- obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
- obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
- obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
-+obj-pci-$(CONFIG_MACH_WG302V1) += wg302v1-pci.o
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
- obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
- obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
- obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
-+obj-$(CONFIG_MACH_WG302V1) += wg302v1-setup.o
- obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
-+ *
-+ * PCI setup routines for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Software, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init wg302v1_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wg302v1_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci wg302v1_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wg302v1_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = wg302v1_map_irq,
-+};
-+
-+int __init wg302v1_pci_init(void)
-+{
-+ if (machine_is_wg302v1())
-+ pci_common_init(&wg302v1_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wg302v1_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -0,0 +1,147 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
-+ *
-+ * Board setup for the Netgear WG302 v1 and WAG302 v1
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wg302v1_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wg302v1_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wg302v1_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wg302v1_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wg302v1_flash_resource,
-+};
-+
-+static struct resource wg302v1_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port wg302v1_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wg302v1_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wg302v1_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = wg302v1_uart_resources,
-+};
-+
-+static struct eth_plat_info wg302v1_plat_eth[] = {
-+ {
-+ .phy = 30,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device wg302v1_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wg302v1_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *wg302v1_devices[] __initdata = {
-+ &wg302v1_flash,
-+ &wg302v1_uart,
-+ &wg302v1_eth[0],
-+};
-+
-+static void __init wg302v1_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wg302v1_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wg302v1_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wg302v1_devices, ARRAY_SIZE(wg302v1_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WG302V1
-+MACHINE_START(WG302V1, "Netgear WG302 v1 / WAG302 v1")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .fixup = wg302v1_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = wg302v1_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch b/target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch
deleted file mode 100644
index 08ebf9072a..0000000000
--- a/target/linux/ixp4xx/patches-3.10/110-pronghorn_series_support.patch
+++ /dev/null
@@ -1,393 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -15,6 +15,8 @@ CONFIG_ARCH_ADI_COYOTE=y
- CONFIG_MACH_GATEWAY7001=y
- CONFIG_MACH_WG302V1=y
- CONFIG_MACH_WG302V2=y
-+CONFIG_MACH_PRONGHORN=y
-+CONFIG_MACH_PRONGHORNMETRO=y
- CONFIG_ARCH_IXDP425=y
- CONFIG_MACH_IXDPG425=y
- CONFIG_MACH_IXDP465=y
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,22 @@ config MACH_WG302V2
- WG302 v2 or WAG302 v2 Access Points. For more information
- on this platform, see http://openwrt.org
-
-+config MACH_PRONGHORN
-+ bool "ADI Pronghorn series"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Pronghorn series. For more
-+ information on this platform, see http://www.adiengineering.com
-+
-+#
-+# There're only minimal differences kernel-wise between the Pronghorn and
-+# Pronghorn Metro boards - they use different chip selects to drive the
-+# CF slot connected to the expansion bus, so we just enable them together.
-+#
-+config MACH_PRONGHORNMETRO
-+ def_bool MACH_PRONGHORN
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_WG302V1) += wg302
- obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
-+obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-
- obj-y += common.o
-
-@@ -39,6 +40,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
- obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
-+obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
- */
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
-- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256())
-+ machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-+ machine_is_pronghorn() || machine_is_pronghorn_metro())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-pci.c
-@@ -0,0 +1,69 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghorn-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init pronghorn_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init pronghorn_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO4;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 16)
-+ return IRQ_IXP4XX_GPIO1;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci pronghorn_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = pronghorn_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = pronghorn_map_irq,
-+};
-+
-+int __init pronghorn_pci_init(void)
-+{
-+ if (machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ pci_common_init(&pronghorn_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(pronghorn_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -0,0 +1,252 @@
-+/*
-+ * arch/arm/mach-ixp4xx/pronghorn-setup.c
-+ *
-+ * Board setup for the ADI Engineering Pronghorn series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data pronghorn_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource pronghorn_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device pronghorn_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &pronghorn_flash_resource,
-+};
-+
-+static struct resource pronghorn_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port pronghorn_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device pronghorn_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = pronghorn_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = pronghorn_uart_resources,
-+};
-+
-+static struct i2c_gpio_platform_data pronghorn_i2c_gpio_data = {
-+ .sda_pin = 9,
-+ .scl_pin = 10,
-+};
-+
-+static struct platform_device pronghorn_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &pronghorn_i2c_gpio_data,
-+ },
-+};
-+
-+static struct gpio_led pronghorn_led_pin[] = {
-+ {
-+ .name = "pronghorn:green:status",
-+ .gpio = 7,
-+ }
-+};
-+
-+static struct gpio_led_platform_data pronghorn_led_data = {
-+ .num_leds = 1,
-+ .leds = pronghorn_led_pin,
-+};
-+
-+static struct platform_device pronghorn_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &pronghorn_led_data,
-+};
-+
-+static struct resource pronghorn_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO0,
-+ .end = IRQ_IXP4XX_GPIO0,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data pronghorn_pata_data = {
-+ .cs0_bits = 0xbfff0043,
-+ .cs1_bits = 0xbfff0043,
-+};
-+
-+static struct platform_device pronghorn_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &pronghorn_pata_data,
-+ .num_resources = ARRAY_SIZE(pronghorn_pata_resources),
-+ .resource = pronghorn_pata_resources,
-+};
-+
-+static struct eth_plat_info pronghorn_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device pronghorn_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = pronghorn_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = pronghorn_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *pronghorn_devices[] __initdata = {
-+ &pronghorn_flash,
-+ &pronghorn_uart,
-+ &pronghorn_led,
-+ &pronghorn_eth[0],
-+ &pronghorn_eth[1],
-+};
-+
-+static void __init pronghorn_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ pronghorn_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ pronghorn_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(pronghorn_devices, ARRAY_SIZE(pronghorn_devices));
-+
-+ if (machine_is_pronghorn()) {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+ } else {
-+ pronghorn_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(3);
-+ pronghorn_pata_resources[0].end = IXP4XX_EXP_BUS_END(3);
-+
-+ pronghorn_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(4);
-+ pronghorn_pata_resources[1].end = IXP4XX_EXP_BUS_END(4);
-+
-+ pronghorn_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ pronghorn_pata_data.cs1_cfg = IXP4XX_EXP_CS4;
-+
-+ platform_device_register(&pronghorn_i2c_gpio);
-+ }
-+
-+ platform_device_register(&pronghorn_pata);
-+}
-+
-+MACHINE_START(PRONGHORN, "ADI Engineering Pronghorn")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = pronghorn_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+
-+MACHINE_START(PRONGHORNMETRO, "ADI Engineering Pronghorn Metro")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = pronghorn_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch b/target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch
deleted file mode 100644
index ed9f7a785d..0000000000
--- a/target/linux/ixp4xx/patches-3.10/111-pronghorn_swap_uarts.patch
+++ /dev/null
@@ -1,44 +0,0 @@
---- a/arch/arm/mach-ixp4xx/pronghorn-setup.c
-+++ b/arch/arm/mach-ixp4xx/pronghorn-setup.c
-@@ -52,31 +52,31 @@ static struct platform_device pronghorn_
-
- static struct resource pronghorn_uart_resources [] = {
- {
-- .start = IXP4XX_UART1_BASE_PHYS,
-- .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- },
- {
-- .start = IXP4XX_UART2_BASE_PHYS,
-- .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
- .flags = IORESOURCE_MEM
- }
- };
-
- static struct plat_serial8250_port pronghorn_uart_data[] = {
- {
-- .mapbase = IXP4XX_UART1_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART1,
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
- .uartclk = IXP4XX_UART_XTAL,
- },
- {
-- .mapbase = IXP4XX_UART2_BASE_PHYS,
-- .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-- .irq = IRQ_IXP4XX_UART2,
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
- .iotype = UPIO_MEM,
- .regshift = 2,
diff --git a/target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch b/target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch
deleted file mode 100644
index fe6d26eb55..0000000000
--- a/target/linux/ixp4xx/patches-3.10/115-sidewinder_support.patch
+++ /dev/null
@@ -1,286 +0,0 @@
-From 95dac4a842a3c66f69f949b48f9075e16275f77b Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Jun 2013 15:48:47 +0200
-Subject: [PATCH 07/36] 115-sidewinder_support.patch
-
----
- arch/arm/mach-ixp4xx/Kconfig | 10 +-
- arch/arm/mach-ixp4xx/Makefile | 2 +
- arch/arm/mach-ixp4xx/sidewinder-pci.c | 68 ++++++++++++++
- arch/arm/mach-ixp4xx/sidewinder-setup.c | 151 +++++++++++++++++++++++++++++++
- 4 files changed, 230 insertions(+), 1 deletion(-)
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-pci.c
- create mode 100644 arch/arm/mach-ixp4xx/sidewinder-setup.c
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -81,6 +81,14 @@ config MACH_PRONGHORN
- config MACH_PRONGHORNMETRO
- def_bool MACH_PRONGHORN
-
-+config MACH_SIDEWINDER
-+ bool "ADI Sidewinder"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the ADI
-+ Engineering Sidewinder board. For more information on this
-+ platform, see http://www.adiengineering.com
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
-@@ -177,7 +185,7 @@ config MACH_ARCOM_VULCAN
- #
- config CPU_IXP46X
- bool
-- depends on MACH_IXDP465
-+ depends on MACH_IXDP465 || MACH_SIDEWINDER
- default y
-
- config CPU_IXP43X
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
- obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
-+obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-
- obj-y += common.o
-
-@@ -41,6 +42,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
- obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_mlr.o
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
-+obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
-+ *
-+ * PCI setup routines for ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init sidewinder_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init sidewinder_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+}
-+
-+struct hw_pci sidewinder_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = sidewinder_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = sidewinder_map_irq,
-+};
-+
-+int __init sidewinder_pci_init(void)
-+{
-+ if (machine_is_sidewinder())
-+ pci_common_init(&sidewinder_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(sidewinder_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
-@@ -0,0 +1,155 @@
-+/*
-+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
-+ *
-+ * Board setup for the ADI Engineering Sidewinder
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data sidewinder_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource sidewinder_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device sidewinder_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &sidewinder_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &sidewinder_flash_resource,
-+};
-+
-+static struct resource sidewinder_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+static struct plat_serial8250_port sidewinder_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device sidewinder_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = sidewinder_uart_data,
-+ },
-+ .num_resources = ARRAY_SIZE(sidewinder_uart_resources),
-+ .resource = sidewinder_uart_resources,
-+};
-+
-+static struct eth_plat_info sidewinder_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, {
-+ .phy = 31,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+ }
-+};
-+
-+static struct platform_device sidewinder_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = sidewinder_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = sidewinder_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = sidewinder_plat_eth + 2,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *sidewinder_devices[] __initdata = {
-+ &sidewinder_flash,
-+ &sidewinder_uart,
-+ &sidewinder_eth[0],
-+ &sidewinder_eth[1],
-+ &sidewinder_eth[2],
-+};
-+
-+static void __init sidewinder_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ sidewinder_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ sidewinder_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_64M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(sidewinder_devices, ARRAY_SIZE(sidewinder_devices));
-+}
-+
-+MACHINE_START(SIDEWINDER, "ADI Engineering Sidewinder")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = sidewinder_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch b/target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch
deleted file mode 100644
index 7d633f7135..0000000000
--- a/target/linux/ixp4xx/patches-3.10/116-sidewinder_fis_location.patch
+++ /dev/null
@@ -1,30 +0,0 @@
---- a/drivers/mtd/redboot.c
-+++ b/drivers/mtd/redboot.c
-@@ -30,6 +30,8 @@
- #include <linux/mtd/partitions.h>
- #include <linux/module.h>
-
-+#include <asm/mach-types.h>
-+
- struct fis_image_desc {
- unsigned char name[16]; // Null terminated name
- uint32_t flash_base; // Address within FLASH of image
-@@ -47,7 +49,8 @@ struct fis_list {
- struct fis_list *next;
- };
-
--static int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+int directory = CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK;
-+
- module_param(directory, int, 0);
-
- static inline int redboot_checksum(struct fis_image_desc *img)
-@@ -75,6 +78,8 @@ static int parse_redboot_partitions(stru
- #ifdef CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED
- static char nullstring[] = "unallocated";
- #endif
-+ if (machine_is_sidewinder())
-+ directory = -5;
-
- if ( directory < 0 ) {
- offset = master->size + directory * master->erasesize;
diff --git a/target/linux/ixp4xx/patches-3.10/120-compex_support.patch b/target/linux/ixp4xx/patches-3.10/120-compex_support.patch
deleted file mode 100644
index 290952d114..0000000000
--- a/target/linux/ixp4xx/patches-3.10/120-compex_support.patch
+++ /dev/null
@@ -1,199 +0,0 @@
-From 24025a2dcf1248079dd3019fac6ed955252d277f Mon Sep 17 00:00:00 2001
-From: Imre Kaloz <kaloz@openwrt.org>
-Date: Mon, 14 Jul 2008 21:56:34 +0200
-Subject: [PATCH] Add support for the Compex WP18 / NP18A boards
-
-Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
----
-
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_COMPEXWP18
-+ bool "Compex WP18 / NP18A"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Compex'
-+ WP18 or NP18A boards. For more information on this
-+ platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -21,6 +21,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
- obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-pci.o
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
-+obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -43,6 +44,7 @@ obj-$(CONFIG_MACH_GORAMO_MLR) += goramo_
- obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulcan-setup.o
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
-+obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/compex42x-setup.c
-@@ -0,0 +1,141 @@
-+/*
-+ * arch/arm/mach-ixp4xx/compex-setup.c
-+ *
-+ * Compex WP18 / NP18A board-setup
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data compex42x_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource compex42x_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device compex42x_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &compex42x_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &compex42x_flash_resource,
-+};
-+
-+static struct resource compex42x_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port compex42x_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device compex42x_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = compex42x_uart_data,
-+ .num_resources = 2,
-+ .resource = compex42x_uart_resources,
-+};
-+
-+static struct eth_plat_info compex42x_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0xf0000,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 3,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device compex42x_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = compex42x_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = compex42x_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *compex42x_devices[] __initdata = {
-+ &compex42x_flash,
-+ &compex42x_uart,
-+ &compex42x_eth[0],
-+ &compex42x_eth[1],
-+};
-+
-+static void __init compex42x_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ compex42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ compex42x_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ platform_add_devices(compex42x_devices, ARRAY_SIZE(compex42x_devices));
-+}
-+
-+MACHINE_START(COMPEXWP18, "Compex WP18 / NP18A")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = compex42x_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -69,7 +69,8 @@ struct hw_pci ixdp425_pci __initdata = {
- int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
-- machine_is_ixdp465() || machine_is_kixrp435())
-+ machine_is_ixdp465() || machine_is_kixrp435() ||
-+ machine_is_compex42x())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
diff --git a/target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch
deleted file mode 100644
index 8692b34ef1..0000000000
--- a/target/linux/ixp4xx/patches-3.10/130-wrt300nv2_support.patch
+++ /dev/null
@@ -1,227 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_COMPEXWP18
- WP18 or NP18A boards. For more information on this
- platform, see http://www.compex.com.sg/home/OEM/product_ap.htm
-
-+config MACH_WRT300NV2
-+ bool "Linksys WRT300N v2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Linksys'
-+ WRT300N v2 router. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_ARCOM_VULCAN) += v
- obj-pci-$(CONFIG_MACH_PRONGHORN) += pronghorn-pci.o
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-
- obj-y += common.o
-
-@@ -45,6 +46,7 @@ obj-$(CONFIG_MACH_ARCOM_VULCAN) += vulca
- obj-$(CONFIG_MACH_PRONGHORN) += pronghorn-setup.o
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
-+obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -43,7 +43,8 @@ static __inline__ void __arch_decomp_set
- if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
-- machine_is_pronghorn() || machine_is_pronghorn_metro())
-+ machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-+ machine_is_wrt300nv2())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-@@ -0,0 +1,64 @@
-+/*
-+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
-+ *
-+ * PCI setup routines for Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init wrt300nv2_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init wrt300nv2_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO8;
-+ else return -1;
-+}
-+
-+struct hw_pci wrt300nv2_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = wrt300nv2_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = wrt300nv2_map_irq,
-+};
-+
-+int __init wrt300nv2_pci_init(void)
-+{
-+ if (machine_is_wrt300nv2())
-+ pci_common_init(&wrt300nv2_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(wrt300nv2_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -0,0 +1,110 @@
-+/*
-+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+ *
-+ * Board setup for the Linksys WRT300N v2
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data wrt300nv2_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource wrt300nv2_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device wrt300nv2_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &wrt300nv2_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_flash_resource,
-+};
-+
-+static struct resource wrt300nv2_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port wrt300nv2_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device wrt300nv2_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = wrt300nv2_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &wrt300nv2_uart_resource,
-+};
-+
-+static struct platform_device *wrt300nv2_devices[] __initdata = {
-+ &wrt300nv2_flash,
-+ &wrt300nv2_uart
-+};
-+
-+static void __init wrt300nv2_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ wrt300nv2_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+}
-+
-+#ifdef CONFIG_MACH_WRT300NV2
-+MACHINE_START(WRT300NV2, "Linksys WRT300N v2")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = wrt300nv2_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch
deleted file mode 100644
index 5debbf1072..0000000000
--- a/target/linux/ixp4xx/patches-3.10/131-wrt300nv2_mac_plat_info.patch
+++ /dev/null
@@ -1,42 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,38 @@ static struct platform_device wrt300nv2_
- .resource = &wrt300nv2_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info wrt300nv2_plat_eth[] = {
-+ {
-+ .phy = -1,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device wrt300nv2_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = wrt300nv2_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = wrt300nv2_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *wrt300nv2_devices[] __initdata = {
- &wrt300nv2_flash,
-- &wrt300nv2_uart
-+ &wrt300nv2_uart,
-+ &wrt300nv2_eth[0],
-+ &wrt300nv2_eth[1],
- };
-
- static void __init wrt300nv2_init(void)
diff --git a/target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch b/target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch
deleted file mode 100644
index 99db2673d0..0000000000
--- a/target/linux/ixp4xx/patches-3.10/132-wrt300nv2_mac_fix.patch
+++ /dev/null
@@ -1,72 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -3,6 +3,7 @@
- *
- * Board setup for the Linksys WRT300N v2
- *
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
- * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
- *
- * based on coyote-setup.c:
-@@ -18,6 +19,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/slab.h>
-+#include <linux/etherdevice.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -79,7 +81,8 @@ static struct platform_device wrt300nv2_
- /* Built-in 10/100 Ethernet MAC interfaces */
- static struct eth_plat_info wrt300nv2_plat_eth[] = {
- {
-- .phy = -1,
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
- .rxq = 3,
- .txreadyq = 20,
- }, {
-@@ -112,6 +115,10 @@ static struct platform_device *wrt300nv2
-
- static void __init wrt300nv2_init(void)
- {
-+ uint8_t __iomem *f;
-+ int offset = 0;
-+ int i;
-+
- ixp4xx_sys_init();
-
- wrt300nv2_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-@@ -121,6 +128,32 @@ static void __init wrt300nv2_init(void)
- *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-
- platform_add_devices(wrt300nv2_devices, ARRAY_SIZE(wrt300nv2_devices));
-+
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x60000);
-+
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + i);
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#else
-+ wrt300nv2_plat_eth[0].hwaddr[i] = readb(f + 0x5FFA0 + (i^3));
-+ if (i == 5)
-+ offset = 1;
-+ wrt300nv2_plat_eth[1].hwaddr[i] = (wrt300nv2_plat_eth[0].hwaddr[i] + offset);
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[0].hwaddr)))
-+ random_ether_addr(wrt300nv2_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(wrt300nv2_plat_eth[1].hwaddr))) {
-+ memcpy(wrt300nv2_plat_eth[1].hwaddr, wrt300nv2_plat_eth[0].hwaddr, ETH_ALEN);
-+ wrt300nv2_plat_eth[1].hwaddr[5] = (wrt300nv2_plat_eth[0].hwaddr[5] + 1);
-+ }
- }
-
- #ifdef CONFIG_MACH_WRT300NV2
diff --git a/target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch
deleted file mode 100644
index e57acb330f..0000000000
--- a/target/linux/ixp4xx/patches-3.10/150-lanready_ap1000_support.patch
+++ /dev/null
@@ -1,203 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -105,6 +105,14 @@ config MACH_WRT300NV2
- WRT300N v2 router. For more information on this
- platform, see http://openwrt.org
-
-+config MACH_AP1000
-+ bool "Lanready AP-1000"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Lanready's
-+ AP1000 board. For more information on this
-+ platform, see http://openwrt.org
-+
- config ARCH_IXDP425
- bool "IXDP425"
- help
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -23,6 +23,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORN) += pron
- obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
-+obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-
- obj-y += common.o
-
-@@ -47,6 +48,7 @@ obj-$(CONFIG_MACH_PRONGHORN) += pronghor
- obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
-+obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -0,0 +1,154 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap1000-setup.c
-+ *
-+ * Lanready AP-1000
-+ *
-+ * Copyright (C) 2007 Imre Kaloz <Kaloz@openwrt.org>
-+ *
-+ * based on ixdp425-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data ap1000_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource ap1000_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device ap1000_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap1000_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap1000_flash_resource,
-+};
-+
-+static struct resource ap1000_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port ap1000_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap1000_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = ap1000_uart_data,
-+ .num_resources = 2,
-+ .resource = ap1000_uart_resources
-+};
-+
-+static struct platform_device *ap1000_devices[] __initdata = {
-+ &ap1000_flash,
-+ &ap1000_uart
-+};
-+
-+static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init ap1000_fixup(struct machine_desc *desc,
-+ struct tag *tags, char **cmdline, struct meminfo *mi)
-+
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(ap1000_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, ap1000_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(ap1000_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(ap1000_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init ap1000_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap1000_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap1000_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(ap1000_devices, ARRAY_SIZE(ap1000_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP1000
-+MACHINE_START(AP1000, "Lanready AP-1000")
-+ /* Maintainer: Imre Kaloz <Kaloz@openwrt.org> */
-+ .fixup = ap1000_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = ap1000_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -70,7 +70,7 @@ int __init ixdp425_pci_init(void)
- {
- if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
- machine_is_ixdp465() || machine_is_kixrp435() ||
-- machine_is_compex42x())
-+ machine_is_compex42x() || machine_is_ap1000())
- pci_common_init(&ixdp425_pci);
- return 0;
- }
diff --git a/target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch
deleted file mode 100644
index 2079589a71..0000000000
--- a/target/linux/ixp4xx/patches-3.10/151-lanready_ap1000_mac_plat_info.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -91,15 +91,45 @@ static struct platform_device ap1000_uar
- .resource = ap1000_uart_resources
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ap1000_plat_eth[] = {
-+ {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap1000_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap1000_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap1000_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
- static struct platform_device *ap1000_devices[] __initdata = {
- &ap1000_flash,
-- &ap1000_uart
-+ &ap1000_uart,
-+ &ap1000_eth[0],
-+ &ap1000_eth[1],
- };
-
- static char ap1000_mem_fixup[] __initdata = "mem=64M ";
-
--static void __init ap1000_fixup(struct machine_desc *desc,
-- struct tag *tags, char **cmdline, struct meminfo *mi)
-+static void __init ap1000_fixup(struct tag *tags, char **cmdline,
-+ struct meminfo *mi)
-
- {
- struct tag *t = tags;
diff --git a/target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch b/target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch
deleted file mode 100644
index c9cfabbdcd..0000000000
--- a/target/linux/ixp4xx/patches-3.10/160-delayed_uart_io.patch
+++ /dev/null
@@ -1,121 +0,0 @@
---- a/drivers/tty/serial/8250/8250_core.c
-+++ b/drivers/tty/serial/8250/8250_core.c
-@@ -410,6 +410,20 @@ static void mem_serial_out(struct uart_p
- writeb(value, p->membase + offset);
- }
-
-+static unsigned int memdelay_serial_in(struct uart_port *p, int offset)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ return mem_serial_in(p, offset);
-+}
-+
-+static void memdelay_serial_out(struct uart_port *p, int offset, int value)
-+{
-+ struct uart_8250_port *up = (struct uart_8250_port *)p;
-+ udelay(up->port.rw_delay);
-+ mem_serial_out(p, offset, value);
-+}
-+
- static void mem32_serial_out(struct uart_port *p, int offset, int value)
- {
- offset = offset << p->regshift;
-@@ -461,6 +475,11 @@ static void set_io_from_upio(struct uart
- p->serial_out = mem32_serial_out;
- break;
-
-+ case UPIO_MEM_DELAY:
-+ p->serial_in = memdelay_serial_in;
-+ p->serial_out = memdelay_serial_out;
-+ break;
-+
- #if defined(CONFIG_MIPS_ALCHEMY) || defined(CONFIG_SERIAL_8250_RT288X)
- case UPIO_AU:
- p->serial_in = au_serial_in;
-@@ -486,6 +505,7 @@ serial_port_out_sync(struct uart_port *p
- switch (p->iotype) {
- case UPIO_MEM:
- case UPIO_MEM32:
-+ case UPIO_MEM_DELAY:
- case UPIO_AU:
- p->serial_out(p, offset, value);
- p->serial_in(p, UART_LCR); /* safe, no side-effects */
-@@ -2520,6 +2540,7 @@ static int serial8250_request_std_resour
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
-@@ -2556,6 +2577,7 @@ static void serial8250_release_std_resou
- case UPIO_TSI:
- case UPIO_MEM32:
- case UPIO_MEM:
-+ case UPIO_MEM_DELAY:
- if (!port->mapbase)
- break;
-
-@@ -3095,6 +3117,7 @@ static int serial8250_probe(struct platf
- uart.port.set_termios = p->set_termios;
- uart.port.pm = p->pm;
- uart.port.dev = &dev->dev;
-+ uart.port.rw_delay = p->rw_delay;
- uart.port.irqflags |= irqflag;
- ret = serial8250_register_8250_port(&uart);
- if (ret < 0) {
-@@ -3246,6 +3269,7 @@ int serial8250_register_8250_port(struct
- uart->port.flags = up->port.flags | UPF_BOOT_AUTOCONF;
- uart->bugs = up->bugs;
- uart->port.mapbase = up->port.mapbase;
-+ uart->port.rw_delay = up->port.rw_delay;
- uart->port.private_data = up->port.private_data;
- uart->port.fifosize = up->port.fifosize;
- uart->tx_loadsz = up->tx_loadsz;
---- a/drivers/tty/serial/serial_core.c
-+++ b/drivers/tty/serial/serial_core.c
-@@ -2089,6 +2089,7 @@ uart_report_port(struct uart_driver *drv
- snprintf(address, sizeof(address),
- "I/O 0x%lx offset 0x%x", port->iobase, port->hub6);
- break;
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
-@@ -2710,6 +2711,7 @@ int uart_match_port(struct uart_port *po
- case UPIO_HUB6:
- return (port1->iobase == port2->iobase) &&
- (port1->hub6 == port2->hub6);
-+ case UPIO_MEM_DELAY:
- case UPIO_MEM:
- case UPIO_MEM32:
- case UPIO_AU:
---- a/include/linux/serial_8250.h
-+++ b/include/linux/serial_8250.h
-@@ -27,6 +27,7 @@ struct plat_serial8250_port {
- void *private_data;
- unsigned char regshift; /* register shift */
- unsigned char iotype; /* UPIO_* */
-+ unsigned int rw_delay; /* udelay for slower busses IXP4XX Expansion Bus */
- unsigned char hub6;
- upf_t flags; /* UPF_* flags */
- unsigned int type; /* If UPF_FIXED_TYPE */
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -135,6 +135,7 @@ struct uart_port {
- #define UPIO_MEM32 (3)
- #define UPIO_AU (4) /* Au1x00 and RT288x type IO */
- #define UPIO_TSI (5) /* Tsi108/109 type IO */
-+#define UPIO_MEM_DELAY (6)
-
- unsigned int read_status_mask; /* driver specific */
- unsigned int ignore_status_mask; /* driver specific */
-@@ -183,6 +184,7 @@ struct uart_port {
-
- unsigned int mctrl; /* current modem ctrl settings */
- unsigned int timeout; /* character-based timeout */
-+ unsigned int rw_delay; /* udelay for slow busses, IXP4XX Expansion Bus */
- unsigned int type; /* port type */
- const struct uart_ops *ops;
- unsigned int custom_divisor;
diff --git a/target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch
deleted file mode 100644
index 75212bc2e7..0000000000
--- a/target/linux/ixp4xx/patches-3.10/162-wg302v1_mem_fixup.patch
+++ /dev/null
@@ -1,38 +0,0 @@
---- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -117,6 +117,35 @@ static struct platform_device *wg302v1_d
- &wg302v1_eth[0],
- };
-
-+static char wg302v1_mem_fixup[] __initdata = " mem=32M";
-+
-+static void __init wg302v1_fixup(struct tag *tags, char **cmdline,
-+ struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+ size_t fixlen, cmdlen;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ fixlen = strlen(wg302v1_mem_fixup);
-+ cmdlen = strlen(p);
-+ if (fixlen + cmdlen >= COMMAND_LINE_SIZE)
-+ return;
-+
-+ /* append the fixup to the cmdline */
-+ memmove(p + cmdlen, wg302v1_mem_fixup, fixlen + 1);
-+
-+ /* Adjust the size of the atag if there was one */
-+ if (t->hdr.size)
-+ t->hdr.size += fixlen;
-+}
-+
- static void __init wg302v1_init(void)
- {
- ixp4xx_sys_init();
diff --git a/target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch
deleted file mode 100644
index f7090cd1b4..0000000000
--- a/target/linux/ixp4xx/patches-3.10/170-ixdpg425_mac_plat_info.patch
+++ /dev/null
@@ -1,51 +0,0 @@
---- a/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ b/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -14,6 +14,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/dma-mapping.h>
-
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -81,9 +82,39 @@ static struct platform_device coyote_uar
- .resource = &coyote_uart_resource,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info ixdpg425_plat_eth[] = {
-+ {
-+ .phy = 5,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 4,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ixdpg425_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ixdpg425_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ixdpg425_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+
- static struct platform_device *coyote_devices[] __initdata = {
- &coyote_flash,
-- &coyote_uart
-+ &coyote_uart,
-+ &ixdpg425_eth[0],
-+ &ixdpg425_eth[1],
- };
-
- static void __init coyote_init(void)
diff --git a/target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch b/target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch
deleted file mode 100644
index 481252dd7f..0000000000
--- a/target/linux/ixp4xx/patches-3.10/175-avila_hss_audio_support.patch
+++ /dev/null
@@ -1,2090 +0,0 @@
---- a/sound/soc/Kconfig
-+++ b/sound/soc/Kconfig
-@@ -54,6 +54,7 @@ source "sound/soc/sh/Kconfig"
- source "sound/soc/tegra/Kconfig"
- source "sound/soc/txx9/Kconfig"
- source "sound/soc/ux500/Kconfig"
-+source "sound/soc/gw-avila/Kconfig"
-
- # Supported codecs
- source "sound/soc/codecs/Kconfig"
---- a/sound/soc/Makefile
-+++ b/sound/soc/Makefile
-@@ -32,3 +32,4 @@ obj-$(CONFIG_SND_SOC) += sh/
- obj-$(CONFIG_SND_SOC) += tegra/
- obj-$(CONFIG_SND_SOC) += txx9/
- obj-$(CONFIG_SND_SOC) += ux500/
-+obj-$(CONFIG_SND_SOC) += gw-avila/
---- /dev/null
-+++ b/sound/soc/gw-avila/Kconfig
-@@ -0,0 +1,17 @@
-+config SND_GW_AVILA_SOC_PCM
-+ tristate
-+
-+config SND_GW_AVILA_SOC_HSS
-+ tristate
-+
-+config SND_GW_AVILA_SOC
-+ tristate "SoC Audio for the Gateworks AVILA Family"
-+ depends on ARCH_IXP4XX && SND_SOC
-+ select SND_GW_AVILA_SOC_PCM
-+ select SND_GW_AVILA_SOC_HSS
-+ select SND_SOC_TLV320AIC3X
-+ help
-+ Say Y or M if you want to add support for codecs attached to
-+ the Gateworks HSS interface. You will also need
-+ to select the audio interfaces to support below.
-+
---- /dev/null
-+++ b/sound/soc/gw-avila/Makefile
-@@ -0,0 +1,8 @@
-+# Gateworks Avila HSS Platform Support
-+snd-soc-gw-avila-objs := gw-avila.o ixp4xx_hss.o
-+snd-soc-gw-avila-pcm-objs := gw-avila-pcm.o
-+snd-soc-gw-avila-hss-objs := gw-avila-hss.o
-+
-+obj-$(CONFIG_SND_GW_AVILA_SOC) += snd-soc-gw-avila.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_PCM) += snd-soc-gw-avila-pcm.o
-+obj-$(CONFIG_SND_GW_AVILA_SOC_HSS) += snd-soc-gw-avila-hss.o
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.c
-@@ -0,0 +1,103 @@
-+/*
-+ * gw-avila-hss.c -- HSS Audio Support for Gateworks Avila
-+ *
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/platform_device.h>
-+#include <linux/interrupt.h>
-+#include <linux/wait.h>
-+#include <linux/delay.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/ac97_codec.h>
-+#include <sound/initval.h>
-+#include <sound/soc.h>
-+
-+#include <asm/irq.h>
-+#include <linux/mutex.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+
-+#define gw_avila_hss_suspend NULL
-+#define gw_avila_hss_resume NULL
-+
-+struct snd_soc_dai_driver gw_avila_hss_dai = {
-+ .playback = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+ .capture = {
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .formats = SNDRV_PCM_FMTBIT_S16_LE, },
-+};
-+
-+static const struct snd_soc_component_driver gw_avila_hss_component = {
-+ .name = "gw_avila_hss",
-+};
-+
-+static int gw_avila_hss_probe(struct platform_device *pdev)
-+{
-+ int port = (pdev->id < 2) ? 0 : 1;
-+ int channel = (pdev->id % 2);
-+
-+ hss_handle[pdev->id] = hss_init(port, channel);
-+ if (!hss_handle[pdev->id]) {
-+ return -ENODEV;
-+ }
-+
-+ return snd_soc_register_component(&pdev->dev, &gw_avila_hss_component,
-+ &gw_avila_hss_dai, 1);
-+}
-+
-+static int gw_avila_hss_remove(struct platform_device *pdev)
-+{
-+ snd_soc_unregister_component(&pdev->dev);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver gw_avila_hss_driver = {
-+ .probe = gw_avila_hss_probe,
-+ .remove = gw_avila_hss_remove,
-+ .driver = {
-+ .name = "gw_avila_hss",
-+ .owner = THIS_MODULE,
-+ }
-+};
-+
-+static int __init gw_avila_hss_init(void)
-+{
-+ return platform_driver_register(&gw_avila_hss_driver);
-+}
-+module_init(gw_avila_hss_init);
-+
-+static void __exit gw_avila_hss_exit(void)
-+{
-+ platform_driver_unregister(&gw_avila_hss_driver);
-+}
-+module_exit(gw_avila_hss_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("HSS Audio Driver for Gateworks Avila");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-hss.h
-@@ -0,0 +1,12 @@
-+/*
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_HSS_H
-+#define _GW_AVILA_HSS_H
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.c
-@@ -0,0 +1,327 @@
-+/*
-+ * ALSA PCM interface for the TI DAVINCI processor
-+ *
-+ * Author: Chris Lang, <clang@gateworks.com>
-+ * Copyright: (C) 2009 Gateworks Corporation
-+ *
-+ * Based On: davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/pcm_params.h>
-+#include <sound/soc.h>
-+
-+#include <asm/dma.h>
-+
-+#include "gw-avila-pcm.h"
-+#include "gw-avila-hss.h"
-+#include "ixp4xx_hss.h"
-+
-+#define GW_AVILA_PCM_DEBUG 0
-+#if GW_AVILA_PCM_DEBUG
-+#define DPRINTK(x...) printk(KERN_DEBUG x)
-+#else
-+#define DPRINTK(x...)
-+#endif
-+
-+static struct snd_pcm_hardware gw_avila_pcm_hardware = {
-+ .info = (SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
-+ SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID),
-+/* SNDRV_PCM_INFO_PAUSE),*/
-+ .formats = (SNDRV_PCM_FMTBIT_S16_LE),
-+ .rates = (SNDRV_PCM_RATE_8000 | SNDRV_PCM_RATE_16000 |
-+ SNDRV_PCM_RATE_22050 | SNDRV_PCM_RATE_32000 |
-+ SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 |
-+ SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000 |
-+ SNDRV_PCM_RATE_KNOT),
-+ .rate_min = 8000,
-+ .rate_max = 8000,
-+ .channels_min = 2,
-+ .channels_max = 2,
-+ .buffer_bytes_max = 64 * 1024, // All of the lines below may need to be changed
-+ .period_bytes_min = 128,
-+ .period_bytes_max = 4 * 1024,
-+ .periods_min = 16,
-+ .periods_max = 32,
-+ .fifo_size = 0,
-+};
-+
-+struct gw_avila_runtime_data {
-+ spinlock_t lock;
-+ int period; /* current DMA period */
-+ int master_lch; /* Master DMA channel */
-+ int slave_lch; /* Slave DMA channel */
-+ struct gw_avila_pcm_dma_params *params; /* DMA params */
-+};
-+
-+static void gw_avila_dma_irq(void *data)
-+{
-+ struct snd_pcm_substream *substream = data;
-+ snd_pcm_period_elapsed(substream);
-+}
-+
-+static int gw_avila_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+ int ret = 0;
-+
-+ switch (cmd) {
-+ case SNDRV_PCM_TRIGGER_START:
-+ case SNDRV_PCM_TRIGGER_RESUME:
-+ case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ hss_tx_start(hdev);
-+ else
-+ hss_rx_start(hdev);
-+ break;
-+ case SNDRV_PCM_TRIGGER_STOP:
-+ case SNDRV_PCM_TRIGGER_SUSPEND:
-+ case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ hss_tx_stop(hdev);
-+ else
-+ hss_rx_stop(hdev);
-+ break;
-+ default:
-+ ret = -EINVAL;
-+ break;
-+ }
-+ return ret;
-+}
-+
-+static int gw_avila_pcm_prepare(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+ hss_set_tx_callback(hdev, gw_avila_dma_irq, substream);
-+ hss_config_tx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+ } else {
-+ hss_set_rx_callback(hdev, gw_avila_dma_irq, substream);
-+ hss_config_rx_dma(hdev, runtime->dma_area, runtime->buffer_size, runtime->period_size);
-+ }
-+
-+ return 0;
-+}
-+
-+static snd_pcm_uframes_t
-+gw_avila_pcm_pointer(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ unsigned int curr = 0;
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ curr = hss_curr_offset_tx(hdev);
-+ else
-+ curr = hss_curr_offset_rx(hdev);
-+ return curr;
-+}
-+
-+static int gw_avila_pcm_open(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+ snd_soc_set_runtime_hwparams(substream, &gw_avila_pcm_hardware);
-+
-+ if (hss_handle[cpu_dai->id] != NULL)
-+ runtime->private_data = hss_handle[cpu_dai->id];
-+ else {
-+ pr_err("hss_handle is NULL\n");
-+ return -1;
-+ }
-+
-+ hss_chan_open(hss_handle[cpu_dai->id]);
-+
-+ return 0;
-+}
-+
-+static int gw_avila_pcm_close(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+ struct hss_device *hdev = runtime->private_data;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-+ memset(hdev->tx_buf, 0, runtime->buffer_size);
-+ } else
-+ memset(hdev->rx_buf, 0, runtime->buffer_size);
-+
-+ hss_chan_close(hdev);
-+
-+ return 0;
-+}
-+
-+static int gw_avila_pcm_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *hw_params)
-+{
-+ return snd_pcm_lib_malloc_pages(substream,
-+ params_buffer_bytes(hw_params));
-+}
-+
-+static int gw_avila_pcm_hw_free(struct snd_pcm_substream *substream)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
-+ memset(runtime->dma_area, 0, runtime->buffer_size);
-+
-+ return snd_pcm_lib_free_pages(substream);
-+}
-+
-+static int gw_avila_pcm_mmap(struct snd_pcm_substream *substream,
-+ struct vm_area_struct *vma)
-+{
-+ struct snd_pcm_runtime *runtime = substream->runtime;
-+
-+ return dma_mmap_writecombine(substream->pcm->card->dev, vma,
-+ runtime->dma_area,
-+ runtime->dma_addr,
-+ runtime->dma_bytes);
-+}
-+
-+struct snd_pcm_ops gw_avila_pcm_ops = {
-+ .open = gw_avila_pcm_open,
-+ .close = gw_avila_pcm_close,
-+ .ioctl = snd_pcm_lib_ioctl,
-+ .hw_params = gw_avila_pcm_hw_params,
-+ .hw_free = gw_avila_pcm_hw_free,
-+ .prepare = gw_avila_pcm_prepare,
-+ .trigger = gw_avila_pcm_trigger,
-+ .pointer = gw_avila_pcm_pointer,
-+ .mmap = gw_avila_pcm_mmap,
-+};
-+
-+static int gw_avila_pcm_preallocate_dma_buffer(struct snd_pcm *pcm, int stream)
-+{
-+ struct snd_pcm_substream *substream = pcm->streams[stream].substream;
-+ struct snd_dma_buffer *buf = &substream->dma_buffer;
-+ size_t size = gw_avila_pcm_hardware.buffer_bytes_max;
-+
-+ buf->dev.type = SNDRV_DMA_TYPE_DEV;
-+ buf->dev.dev = pcm->card->dev;
-+ buf->private_data = NULL;
-+
-+ buf->area = dma_alloc_coherent(pcm->card->dev, size,
-+ &buf->addr, GFP_KERNEL);
-+
-+ if (!buf->area) {
-+ return -ENOMEM;
-+ }
-+
-+ memset(buf->area, 0xff, size);
-+
-+ DPRINTK("preallocate_dma_buffer: area=%p, addr=%p, size=%d\n",
-+ (void *) buf->area, (void *) buf->addr, size);
-+
-+ buf->bytes = size;
-+
-+ return 0;
-+}
-+
-+static void gw_avila_pcm_free(struct snd_pcm *pcm)
-+{
-+ struct snd_pcm_substream *substream;
-+ struct snd_dma_buffer *buf;
-+ int stream;
-+
-+ for (stream = 0; stream < 2; stream++) {
-+ substream = pcm->streams[stream].substream;
-+ if (!substream)
-+ continue;
-+
-+ buf = &substream->dma_buffer;
-+ if (!buf->area)
-+ continue;
-+
-+ dma_free_coherent(NULL, buf->bytes, buf->area, 0);
-+ buf->area = NULL;
-+ }
-+}
-+
-+static u64 gw_avila_pcm_dmamask = 0xFFFFFFFF;
-+
-+static int gw_avila_pcm_new(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_card *card = rtd->card->snd_card;
-+ struct snd_pcm *pcm = rtd->pcm;
-+ struct snd_soc_dai *dai = rtd->codec_dai;
-+ int ret;
-+
-+ if (!card->dev->dma_mask)
-+ card->dev->dma_mask = &gw_avila_pcm_dmamask;
-+ if (!card->dev->coherent_dma_mask)
-+ card->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ if (dai->driver->playback.channels_min) {
-+ ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+ SNDRV_PCM_STREAM_PLAYBACK);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ if (dai->driver->capture.channels_min) {
-+ ret = gw_avila_pcm_preallocate_dma_buffer(pcm,
-+ SNDRV_PCM_STREAM_CAPTURE);
-+ if (ret)
-+ return ret;
-+ }
-+
-+ return 0;
-+}
-+
-+struct snd_soc_platform_driver gw_avila_soc_platform = {
-+ .ops = &gw_avila_pcm_ops,
-+ .pcm_new = gw_avila_pcm_new,
-+ .pcm_free = gw_avila_pcm_free,
-+};
-+
-+static int gw_avila_pcm_platform_probe(struct platform_device *pdev)
-+{
-+ return snd_soc_register_platform(&pdev->dev, &gw_avila_soc_platform);
-+}
-+
-+static int gw_avila_pcm_platform_remove(struct platform_device *pdev)
-+{
-+ snd_soc_unregister_platform(&pdev->dev);
-+ return 0;
-+}
-+
-+static struct platform_driver gw_avila_pcm_driver = {
-+ .driver = {
-+ .name = "gw_avila-audio",
-+ .owner = THIS_MODULE,
-+ },
-+ .probe = gw_avila_pcm_platform_probe,
-+ .remove = gw_avila_pcm_platform_remove,
-+};
-+
-+static int __init gw_avila_soc_platform_init(void)
-+{
-+ return platform_driver_register(&gw_avila_pcm_driver);
-+}
-+module_init(gw_avila_soc_platform_init);
-+
-+static void __exit gw_avila_soc_platform_exit(void)
-+{
-+ platform_driver_unregister(&gw_avila_pcm_driver);
-+}
-+module_exit(gw_avila_soc_platform_exit);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Gateworks Avila PCM DMA module");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila-pcm.h
-@@ -0,0 +1,32 @@
-+/*
-+ * ALSA PCM interface for the Gateworks Avila platform
-+ *
-+ * Author: Chris Lang, <clang@gateworks.com>
-+ * Copyright: (C) 2009 Gateworks Corporation
-+ *
-+ * Based On: davinci-evm.c, Author: Vladimir Barinov, <vbarinov@ru.mvista.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ */
-+
-+#ifndef _GW_AVILA_PCM_H
-+#define _GW_AVILA_PCM_H
-+
-+#if 0
-+struct gw_avila_pcm_dma_params {
-+ char *name; /* stream identifier */
-+ int channel; /* sync dma channel ID */
-+ dma_addr_t dma_addr; /* device physical address for DMA */
-+ unsigned int data_type; /* xfer data type */
-+};
-+
-+struct gw_avila_snd_platform_data {
-+ int tx_dma_ch; // XXX Do we need this?
-+ int rx_dma_ch; // XXX Do we need this
-+};
-+extern struct snd_soc_platform gw_avila_soc_platform[];
-+#endif
-+
-+#endif
---- /dev/null
-+++ b/sound/soc/gw-avila/gw-avila.c
-@@ -0,0 +1,244 @@
-+/*
-+ * File: sound/soc/gw-avila/gw_avila.c
-+ * Author: Chris Lang <clang@gateworks.com>
-+ *
-+ * Created: Tue June 06 2008
-+ * Description: Board driver for Gateworks Avila
-+ *
-+ * Modified:
-+ * Copyright 2009 Gateworks Corporation
-+ *
-+ * Bugs: What Bugs?
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, see the file COPYING, or write
-+ * to the Free Software Foundation, Inc.,
-+ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/device.h>
-+#include <asm/dma.h>
-+#include <linux/platform_device.h>
-+#include <sound/core.h>
-+#include <sound/pcm.h>
-+#include <sound/soc.h>
-+#include <linux/slab.h>
-+#include <linux/gpio.h>
-+
-+#include "ixp4xx_hss.h"
-+#include "gw-avila-hss.h"
-+#include "gw-avila-pcm.h"
-+
-+#define CODEC_FREQ 33333000
-+
-+static int gw_avila_board_startup(struct snd_pcm_substream *substream)
-+{
-+ pr_debug("%s enter\n", __func__);
-+ return 0;
-+}
-+
-+static int gw_avila_hw_params(struct snd_pcm_substream *substream,
-+ struct snd_pcm_hw_params *params)
-+{
-+ struct snd_soc_pcm_runtime *rtd = substream->private_data;
-+ struct snd_soc_dai *codec_dai = rtd->codec_dai;
-+ struct snd_soc_dai *cpu_dai = rtd->cpu_dai;
-+
-+ int ret = 0;
-+
-+ /* set codec DAI configuration */
-+ if (cpu_dai->id % 2) {
-+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBS_CFS);
-+ snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 1, 32);
-+ } else {
-+ ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B | SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_CBM_CFM);
-+ snd_soc_dai_set_tdm_slot(codec_dai, 0, 0, 0, 32);
-+ }
-+
-+ if (ret < 0)
-+ return ret;
-+
-+ /* set the codec system clock */
-+ ret = snd_soc_dai_set_sysclk(codec_dai, 0, CODEC_FREQ, SND_SOC_CLOCK_OUT);
-+ if (ret < 0)
-+ return ret;
-+
-+ return 0;
-+}
-+
-+static const struct snd_soc_dapm_widget aic3x_dapm_widgets[] = {
-+ SND_SOC_DAPM_HP("Headphone Jack", NULL),
-+ SND_SOC_DAPM_LINE("Line Out", NULL),
-+ SND_SOC_DAPM_LINE("Line In", NULL),
-+};
-+
-+static const struct snd_soc_dapm_route audio_map[] = {
-+ {"Headphone Jack", NULL, "HPLOUT"},
-+ {"Headphone Jack", NULL, "HPROUT"},
-+
-+ /* Line Out connected to LLOUT, RLOUT */
-+ {"Line Out", NULL, "LLOUT"},
-+ {"Line Out", NULL, "RLOUT"},
-+
-+ /* Line In connected to (LINE1L | LINE2L), (LINE1R | LINE2R) */
-+ {"LINE1L", NULL, "Line In"},
-+ {"LINE1R", NULL, "Line In"},
-+};
-+
-+/* Logic for a aic3x as connected on a davinci-evm */
-+static int avila_aic3x_init(struct snd_soc_pcm_runtime *rtd)
-+{
-+ struct snd_soc_codec *codec = rtd->codec;
-+ struct snd_soc_dapm_context *dapm = &codec->dapm;
-+
-+ /* Add davinci-evm specific widgets */
-+ snd_soc_dapm_new_controls(dapm, aic3x_dapm_widgets,
-+ ARRAY_SIZE(aic3x_dapm_widgets));
-+
-+ /* Set up davinci-evm specific audio path audio_map */
-+ snd_soc_dapm_add_routes(dapm, audio_map, ARRAY_SIZE(audio_map));
-+
-+ /* not connected */
-+ snd_soc_dapm_disable_pin(dapm, "MONO_LOUT");
-+ //snd_soc_dapm_disable_pin(dapm, "HPLCOM");
-+ //snd_soc_dapm_disable_pin(dapm, "HPRCOM");
-+ snd_soc_dapm_disable_pin(dapm, "MIC3L");
-+ snd_soc_dapm_disable_pin(dapm, "MIC3R");
-+ snd_soc_dapm_disable_pin(dapm, "LINE2L");
-+ snd_soc_dapm_disable_pin(dapm, "LINE2R");
-+
-+ /* always connected */
-+ snd_soc_dapm_enable_pin(dapm, "Headphone Jack");
-+ snd_soc_dapm_enable_pin(dapm, "Line Out");
-+ snd_soc_dapm_enable_pin(dapm, "Line In");
-+
-+ snd_soc_dapm_sync(dapm);
-+
-+ return 0;
-+}
-+
-+static struct snd_soc_ops gw_avila_board_ops = {
-+ .startup = gw_avila_board_startup,
-+ .hw_params = gw_avila_hw_params,
-+};
-+
-+static struct snd_soc_dai_link gw_avila_board_dai[] = {
-+ {
-+ .name = "HSS-0",
-+ .stream_name = "HSS-0",
-+ .cpu_dai_name = "gw_avila_hss.0",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-001b",
-+ .platform_name = "gw_avila-audio.0",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-1",
-+ .stream_name = "HSS-1",
-+ .cpu_dai_name = "gw_avila_hss.1",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-001a",
-+ .platform_name = "gw_avila-audio.1",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-2",
-+ .stream_name = "HSS-2",
-+ .cpu_dai_name = "gw_avila_hss.2",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-0019",
-+ .platform_name = "gw_avila-audio.2",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },{
-+ .name = "HSS-3",
-+ .stream_name = "HSS-3",
-+ .cpu_dai_name = "gw_avila_hss.3",
-+ .codec_dai_name = "tlv320aic3x-hifi",
-+ .codec_name = "tlv320aic3x-codec.0-0018",
-+ .platform_name = "gw_avila-audio.3",
-+ .init = avila_aic3x_init,
-+ .ops = &gw_avila_board_ops,
-+ },
-+};
-+
-+static struct snd_soc_card gw_avila_board[] = {
-+ {
-+ .name = "gw_avila-board.0",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[0],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.1",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[1],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.2",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[2],
-+ .num_links = 1,
-+ },{
-+ .name = "gw_avila-board.3",
-+ .owner = THIS_MODULE,
-+ .dai_link = &gw_avila_board_dai[3],
-+ .num_links = 1,
-+ }
-+};
-+
-+static struct platform_device *gw_avila_board_snd_device[4];
-+
-+static int __init gw_avila_board_init(void)
-+{
-+ int ret;
-+ struct port *port;
-+ int i;
-+
-+ if ((hss_port[0] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+
-+ if ((hss_port[1] = kzalloc(sizeof(*port), GFP_KERNEL)) == NULL)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < 4; i++) {
-+ gw_avila_board_snd_device[i] = platform_device_alloc("soc-audio", i);
-+ if (!gw_avila_board_snd_device[i]) {
-+ return -ENOMEM;
-+ }
-+
-+ platform_set_drvdata(gw_avila_board_snd_device[i], &gw_avila_board[i]);
-+ ret = platform_device_add(gw_avila_board_snd_device[i]);
-+
-+ if (ret) {
-+ platform_device_put(gw_avila_board_snd_device[i]);
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __exit gw_avila_board_exit(void)
-+{
-+ int i;
-+ for (i = 0; i < 4; i++)
-+ platform_device_unregister(gw_avila_board_snd_device[i]);
-+}
-+
-+module_init(gw_avila_board_init);
-+module_exit(gw_avila_board_exit);
-+
-+/* Module information */
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("ALSA SoC HSS Audio gw_avila board");
-+MODULE_LICENSE("GPL");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.c
-@@ -0,0 +1,902 @@
-+/*
-+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
-+ *
-+ * Copyright (C) 2009 Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/module.h>
-+#include <linux/bitops.h>
-+#include <linux/cdev.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <linux/slab.h>
-+#include <linux/delay.h>
-+
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+
-+#include "ixp4xx_hss.h"
-+
-+/*****************************************************************************
-+ * global variables
-+ ****************************************************************************/
-+
-+void hss_chan_read(unsigned long data);
-+static char lock_init = 0;
-+static spinlock_t npe_lock;
-+static struct npe *npe;
-+
-+static const struct {
-+ int tx, txdone, rx, rxfree, chan;
-+}queue_ids[2] = {{HSS0_PKT_TX0_QUEUE, HSS0_PKT_TXDONE_QUEUE, HSS0_PKT_RX_QUEUE,
-+ HSS0_PKT_RXFREE0_QUEUE, HSS0_CHL_RXTRIG_QUEUE},
-+ {HSS1_PKT_TX0_QUEUE, HSS1_PKT_TXDONE_QUEUE, HSS1_PKT_RX_QUEUE,
-+ HSS1_PKT_RXFREE0_QUEUE, HSS1_CHL_RXTRIG_QUEUE},
-+};
-+
-+struct port *hss_port[2];
-+struct hss_device *hss_handle[32];
-+EXPORT_SYMBOL(hss_handle);
-+
-+/*****************************************************************************
-+ * utility functions
-+ ****************************************************************************/
-+
-+#ifndef __ARMEB__
-+static inline void memcpy_swab32(u32 *dest, u32 *src, int cnt)
-+{
-+ int i;
-+ for (i = 0; i < cnt; i++)
-+ dest[i] = swab32(src[i]);
-+}
-+#endif
-+
-+static inline unsigned int sub_offset(unsigned int a, unsigned int b,
-+ unsigned int modulo)
-+{
-+ return (modulo /* make sure the result >= 0 */ + a - b) % modulo;
-+}
-+
-+/*****************************************************************************
-+ * HSS access
-+ ****************************************************************************/
-+
-+static void hss_config_load(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_LOAD;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+ break;
-+ if (npe_recv_message(npe, &msg, "HSS_LOAD_CONFIG"))
-+ break;
-+
-+ /* HSS_LOAD_CONFIG for port #1 returns port_id = #4 */
-+ if (msg.cmd != PORT_CONFIG_LOAD || msg.data32)
-+ break;
-+
-+ /* HDLC may stop working without this */
-+ npe_recv_message(npe, &msg, "FLUSH_IT");
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to reload HSS configuration\n",
-+ port->id);
-+ BUG();
-+}
-+
-+static void hss_config_set_pcr(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_TX_PCR;
-+#if 0
-+ msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE | PCR_TX_UNASS_HIGH_IMP | PCR_TX_V56K_HIGH_IMP | PCR_TX_FB_HIGH_IMP;
-+#else
-+ msg.data32 = PCR_FRM_SYNC_RISINGEDGE | PCR_MSB_ENDIAN |
-+ PCR_TX_DATA_ENABLE | PCR_TX_FB_HIGH_IMP | PCR_DCLK_EDGE_RISING;
-+#endif
-+ if (port->frame_size % 8 == 0)
-+ msg.data32 |= PCR_SOF_NO_FBIT;
-+
-+ if (npe_send_message(npe, &msg, "HSS_SET_TX_PCR"))
-+ break;
-+
-+ msg.index = HSS_CONFIG_RX_PCR;
-+ msg.data32 &= ~ (PCR_DCLK_EDGE_RISING | PCR_FCLK_EDGE_RISING | PCR_TX_DATA_ENABLE);
-+
-+ if (npe_send_message(npe, &msg, "HSS_SET_RX_PCR"))
-+ break;
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS PCR registers\n", port->id);
-+ BUG();
-+}
-+
-+static void hss_config_set_core(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_CORE_CR;
-+#if 0
-+ msg.data32 = 0 | CCR_LOOPBACK |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+#else
-+ msg.data32 = 0 |
-+ (port->id ? CCR_SECOND_HSS : 0);
-+#endif
-+ if (npe_send_message(npe, &msg, "HSS_SET_CORE_CR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS core control"
-+ " register\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_line(struct port *port)
-+{
-+ struct msg msg;
-+
-+ hss_config_set_pcr(port);
-+ hss_config_set_core(port);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_CLOCK_CR;
-+ msg.data32 = CLK42X_SPEED_8192KHZ /* FIXME */;
-+ if (npe_send_message(npe, &msg, "HSS_SET_CLOCK_CR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS clock control"
-+ " register\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_rx_frame(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_RX_FCR;
-+ msg.data16a = port->frame_sync_offset;
-+ msg.data16b = port->frame_size - 1;
-+ if (npe_send_message(npe, &msg, "HSS_SET_RX_FCR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS RX frame size"
-+ " and offset\n", port->id);
-+ BUG();
-+ }
-+}
-+
-+static void hss_config_set_frame(struct port *port)
-+{
-+ struct msg msg;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.index = HSS_CONFIG_TX_FCR;
-+ msg.data16a = TX_FRAME_SYNC_OFFSET;
-+ msg.data16b = port->frame_size - 1;
-+ if (npe_send_message(npe, &msg, "HSS_SET_TX_FCR")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS TX frame size"
-+ " and offset\n", port->id);
-+ BUG();
-+ }
-+ hss_config_set_rx_frame(port);
-+}
-+
-+static void hss_config_set_lut(struct port *port)
-+{
-+ struct msg msg;
-+ int chan_count = 32;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_CONFIG_WRITE;
-+ msg.hss_port = port->id;
-+
-+ msg.index = HSS_CONFIG_TX_LUT;
-+ msg.data32 = 0xffffffff;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.data32 = 0x0;
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_TX_LUT");
-+
-+ msg.index = HSS_CONFIG_RX_LUT;
-+ msg.data32 = 0xffffffff;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.data32 = 0x0;
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+ msg.index += 4;
-+ npe_send_message(npe, &msg, "HSS_SET_RX_LUT");
-+
-+ hss_config_set_frame(port);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_NUM_CHANS_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = chan_count;
-+ if (npe_send_message(npe, &msg, "CHAN_NUM_CHANS_WRITE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to set HSS channel count\n",
-+ port->id);
-+ BUG();
-+ }
-+}
-+
-+static u32 hss_config_get_status(struct port *port)
-+{
-+ struct msg msg;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = PORT_ERROR_READ;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "PORT_ERROR_READ"))
-+ break;
-+ if (npe_recv_message(npe, &msg, "PORT_ERROR_READ"))
-+ break;
-+
-+ return msg.data32;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to read HSS status\n", port->id);
-+ BUG();
-+}
-+
-+static void hss_config_start_chan(struct port *port)
-+{
-+ struct msg msg;
-+
-+ port->chan_last_tx = 0;
-+ port->chan_last_rx = 0;
-+
-+ do {
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_RX_BUF_ADDR_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = port->chan_rx_buf_phys;
-+ if (npe_send_message(npe, &msg, "CHAN_RX_BUF_ADDR_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BUF_ADDR_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data32 = port->chan_tx_pointers_phys;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BUF_ADDR_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_FLOW_ENABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "CHAN_FLOW_ENABLE"))
-+ break;
-+ port->chan_started = 1;
-+ return;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to start channelized flow\n",
-+ port->id);
-+ BUG();
-+}
-+
-+static void hss_config_stop_chan(struct port *port)
-+{
-+ struct msg msg;
-+
-+ if (!port->chan_started)
-+ return;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_FLOW_DISABLE;
-+ msg.hss_port = port->id;
-+ if (npe_send_message(npe, &msg, "CHAN_FLOW_DISABLE")) {
-+ printk(KERN_CRIT "HSS-%i: unable to stop channelized flow\n",
-+ port->id);
-+ BUG();
-+ }
-+ hss_config_get_status(port); /* make sure it's halted */
-+ port->chan_started = 0;
-+}
-+
-+static int hss_config_load_firmware(struct port *port)
-+{
-+ struct msg msg;
-+
-+ if (port->initialized)
-+ return 0;
-+
-+ if (!npe_running(npe)) {
-+ int err;
-+ if ((err = npe_load_firmware(npe, "NPE-A-HSS",
-+ port->dev)))
-+ return err;
-+ }
-+
-+ do {
-+ /* HSS main configuration */
-+ hss_config_set_line(port);
-+
-+ hss_config_set_frame(port);
-+
-+ /* Channelized operation settings */
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BLK_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8b = (CHAN_TX_LIST_FRAMES & ~7) / 2;
-+ msg.data8a = msg.data8b / 4;
-+ msg.data8d = CHAN_TX_LIST_FRAMES - msg.data8b;
-+ msg.data8c = msg.data8d / 4;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BLK_CFG_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_RX_BUF_CFG_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = CHAN_RX_TRIGGER / 8;
-+ msg.data8b = CHAN_RX_FRAMES;
-+ if (npe_send_message(npe, &msg, "CHAN_RX_BUF_CFG_WRITE"))
-+ break;
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = CHAN_TX_BUF_SIZE_WRITE;
-+ msg.hss_port = port->id;
-+ msg.data8a = CHAN_TX_LISTS;
-+ if (npe_send_message(npe, &msg, "CHAN_TX_BUF_SIZE_WRITE"))
-+ break;
-+
-+ port->initialized = 1;
-+ return 0;
-+ } while (0);
-+
-+ printk(KERN_CRIT "HSS-%i: unable to start HSS operation\n", port->id);
-+ BUG();
-+}
-+
-+void hss_chan_irq(void *pdev)
-+{
-+ struct port *port = pdev;
-+
-+ qmgr_disable_irq(queue_ids[port->id].chan);
-+
-+ tasklet_hi_schedule(&port->task);
-+}
-+
-+
-+int hss_prepare_chan(struct port *port)
-+{
-+ int err, i, j;
-+ u32 *temp;
-+ u32 temp2;
-+ u8 *temp3;
-+
-+ if (port->initialized)
-+ return 0;
-+
-+ if ((err = hss_config_load_firmware(port)))
-+ return err;
-+
-+ if ((err = qmgr_request_queue(queue_ids[port->id].chan,
-+ CHAN_QUEUE_LEN, 0, 0, "%s:hss", "hss")))
-+ return err;
-+
-+ port->chan_tx_buf = dma_alloc_coherent(port->dev, chan_tx_buf_len(port), &port->chan_tx_buf_phys, GFP_DMA);
-+ memset(port->chan_tx_buf, 0, chan_tx_buf_len(port));
-+
-+ port->chan_tx_pointers = dma_alloc_coherent(port->dev, chan_tx_buf_len(port) / CHAN_TX_LIST_FRAMES * 4, &port->chan_tx_pointers_phys, GFP_DMA);
-+
-+ temp3 = port->chan_tx_buf;
-+ for (i = 0; i < CHAN_TX_LISTS; i++) {
-+ for (j = 0; j < 8; j++) {
-+ port->tx_lists[i][j] = temp3;
-+ temp3 += CHAN_TX_LIST_FRAMES * 4;
-+ }
-+ }
-+
-+ temp = port->chan_tx_pointers;
-+ temp2 = port->chan_tx_buf_phys;
-+ for (i = 0; i < CHAN_TX_LISTS; i++)
-+ {
-+ for (j = 0; j < 32; j++)
-+ {
-+ *temp = temp2;
-+ temp2 += CHAN_TX_LIST_FRAMES;
-+ temp++;
-+ }
-+ }
-+
-+ port->chan_rx_buf = dma_alloc_coherent(port->dev, chan_rx_buf_len(port), &port->chan_rx_buf_phys, GFP_DMA);
-+
-+ for (i = 0; i < 8; i++) {
-+ temp3 = port->chan_rx_buf + (i * 4 * 128);
-+ for (j = 0; j < 8; j++) {
-+ port->rx_frames[i][j] = temp3;
-+ temp3 += CHAN_RX_TRIGGER;
-+ }
-+ }
-+
-+ qmgr_set_irq(queue_ids[port->id].chan, QUEUE_IRQ_SRC_NOT_EMPTY,
-+ hss_chan_irq, port);
-+
-+ return 0;
-+
-+}
-+
-+int hss_tx_start(struct hss_device *hdev)
-+{
-+ unsigned long flags;
-+ struct port *port = hdev->port;
-+
-+ hdev->tx_loc = 0;
-+ hdev->tx_frame = 0;
-+
-+ set_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ if (!port->chan_started)
-+ {
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+ spin_lock_irqsave(&npe_lock, flags);
-+ hss_config_start_chan(port);
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+ hss_chan_irq(port);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_start);
-+
-+int hss_rx_start(struct hss_device *hdev)
-+{
-+ unsigned long flags;
-+ struct port *port = hdev->port;
-+
-+ hdev->rx_loc = 0;
-+ hdev->rx_frame = 0;
-+
-+ set_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+ if (!port->chan_started)
-+ {
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+ spin_lock_irqsave(&npe_lock, flags);
-+ hss_config_start_chan(port);
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+ hss_chan_irq(port);
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_start);
-+
-+int hss_tx_stop(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+
-+ clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_tx_stop);
-+
-+int hss_rx_stop(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+
-+ clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_rx_stop);
-+
-+int hss_chan_open(struct hss_device *hdev)
-+{
-+ struct port *port = hdev->port;
-+ int i, err = 0;
-+
-+ if (port->chan_open)
-+ return 0;
-+
-+ if (port->mode == MODE_HDLC) {
-+ err = -ENOSYS;
-+ goto out;
-+ }
-+
-+ if (port->mode == MODE_G704 && port->channels[0] == hdev->id) {
-+ err = -EBUSY; /* channel #0 is used for G.704 signaling */
-+ goto out;
-+ }
-+
-+ for (i = MAX_CHANNELS; i > port->frame_size / 8; i--)
-+ if (port->channels[i - 1] == hdev->id) {
-+ err = -ECHRNG; /* frame too short */
-+ goto out;
-+ }
-+
-+ hdev->rx_loc = hdev->tx_loc = 0;
-+ hdev->rx_frame = hdev->tx_frame = 0;
-+
-+ //clear_bit((1 << hdev->id), &port->chan_rx_bitmap);
-+ //clear_bit((1 << hdev->id), &port->chan_tx_bitmap);
-+
-+ if (!port->initialized) {
-+ hss_prepare_chan(port);
-+
-+ hss_config_stop_chan(port);
-+ hdev->open_count++;
-+ port->chan_open_count++;
-+
-+ hss_config_set_lut(port);
-+ hss_config_load(port);
-+
-+ }
-+ port->chan_open = 1;
-+
-+out:
-+ return err;
-+}
-+EXPORT_SYMBOL(hss_chan_open);
-+
-+int hss_chan_close(struct hss_device *hdev)
-+{
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_chan_close);
-+
-+void hss_chan_read(unsigned long data)
-+{
-+ struct port *port = (void *)data;
-+ struct hss_device *hdev;
-+ u8 *hw_buf, *save_buf;
-+ u8 *buf;
-+ u32 v;
-+ unsigned int tx_list, rx_frame;
-+ int i, j, channel;
-+ u8 more_work = 0;
-+
-+/*
-+ My Data in the hardware buffer is scattered by channels into 4 trunks
-+ as follows for rx
-+
-+ channel 0 channel 1 channel 2 channel 3
-+Trunk 1 = 0 -> 127 128 -> 255 256 -> 383 384 -> 512
-+Trunk 2 = 513 -> 639 640 -> 768 769 -> 895 896 -> 1023
-+Trunk 3 = 1024 -> 1151 1152 -> 1207 1208 -> 1407 1408 -> 1535
-+Trunk 4 = 1535 -> 1663 1664 -> 1791 1792 -> 1920 1921 -> 2047
-+
-+ I will get CHAN_RX_TRIGGER worth of bytes out of each channel on each trunk
-+ with each IRQ
-+
-+ For TX Data, it is split into 8 lists with each list containing 16 bytes per
-+ channel
-+
-+Trunk 1 = 0 -> 16 17 -> 32 33 -> 48 49 -> 64
-+Trunk 2 = 65 -> 80 81 -> 96 97 -> 112 113 -> 128
-+Trunk 3 = 129 -> 144 145 -> 160 161 -> 176 177 -> 192
-+Trunk 4 = 193 -> 208 209 -> 224 225 -> 240 241 -> 256
-+
-+*/
-+
-+
-+ while ((v = qmgr_get_entry(queue_ids[port->id].chan)))
-+ {
-+ tx_list = (v >> 8) & 0xFF;
-+ rx_frame = v & 0xFF;
-+
-+ if (tx_list == 7)
-+ tx_list = 0;
-+ else
-+ tx_list++;
-+ for (channel = 0; channel < 8; channel++) {
-+
-+ hdev = port->chan_devices[channel];
-+ if (!hdev)
-+ continue;
-+
-+ if (test_bit(1 << channel, &port->chan_tx_bitmap)) {
-+ buf = (u8 *)hdev->tx_buf + hdev->tx_loc;
-+#if 0
-+ hw_buf = (u8 *)port->chan_tx_buf;
-+ hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+ hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+ save_buf = hw_buf;
-+#else
-+ save_buf = port->tx_lists[tx_list][channel];
-+#endif
-+ for (i = 0; i < CHAN_TX_LIST_FRAMES; i++) {
-+ hw_buf = save_buf + i;
-+ for (j = 0; j < 4; j++) {
-+ *hw_buf = *(buf++);
-+ hw_buf += CHAN_TX_LIST_FRAMES;
-+ }
-+
-+ hdev->tx_loc += 4;
-+ hdev->tx_frame++;
-+ if (hdev->tx_loc >= hdev->tx_buffer_size) {
-+ hdev->tx_loc = 0;
-+ buf = (u8 *)hdev->tx_buf;
-+ }
-+ }
-+ } else {
-+#if 0
-+ hw_buf = (u8 *)port->chan_tx_buf;
-+ hw_buf += (tx_list * CHAN_TX_LIST_FRAMES * 32);
-+ hw_buf += (4 * CHAN_TX_LIST_FRAMES * channel);
-+#else
-+ hw_buf = port->tx_lists[tx_list][channel];
-+#endif
-+ memset(hw_buf, 0, 64);
-+ }
-+
-+ if (hdev->tx_frame >= hdev->tx_period_size && test_bit(1 << channel, &port->chan_tx_bitmap))
-+ {
-+ hdev->tx_frame %= hdev->tx_period_size;
-+ if (hdev->tx_callback)
-+ hdev->tx_callback(hdev->tx_data);
-+ more_work = 1;
-+ }
-+
-+ if (test_bit(1 << channel, &port->chan_rx_bitmap)) {
-+ buf = (u8 *)hdev->rx_buf + hdev->rx_loc;
-+#if 0
-+ hw_buf = (u8 *)port->chan_rx_buf;
-+ hw_buf += (4 * CHAN_RX_FRAMES * channel);
-+ hw_buf += rx_frame;
-+ save_buf = hw_buf;
-+#else
-+ save_buf = port->rx_frames[channel][rx_frame >> 4];
-+#endif
-+ for (i = 0; i < CHAN_RX_TRIGGER; i++) {
-+ hw_buf = save_buf + i;
-+ for (j = 0; j < 4; j++) {
-+ *(buf++) = *hw_buf;
-+ hw_buf += CHAN_RX_FRAMES;
-+ }
-+ hdev->rx_loc += 4;
-+ hdev->rx_frame++;
-+ if (hdev->rx_loc >= hdev->rx_buffer_size) {
-+ hdev->rx_loc = 0;
-+ buf = (u8 *)hdev->rx_buf;
-+ }
-+ }
-+ }
-+
-+ if (hdev->rx_frame >= hdev->rx_period_size && test_bit(1 << channel, &port->chan_rx_bitmap))
-+ {
-+ hdev->rx_frame %= hdev->rx_period_size;
-+ if (hdev->rx_callback)
-+ hdev->rx_callback(hdev->rx_data);
-+ more_work = 1;
-+ }
-+ }
-+#if 0
-+ if (more_work)
-+ {
-+ tasklet_hi_schedule(&port->task);
-+ return;
-+ }
-+#endif
-+ }
-+
-+ qmgr_enable_irq(queue_ids[port->id].chan);
-+
-+ return;
-+
-+}
-+
-+struct hss_device *hss_chan_create(struct port *port, unsigned int channel)
-+{
-+ struct hss_device *chan_dev;
-+ unsigned long flags;
-+
-+ chan_dev = kzalloc(sizeof(struct hss_device), GFP_KERNEL);
-+
-+ spin_lock_irqsave(&npe_lock, flags);
-+
-+ chan_dev->id = channel;
-+ chan_dev->port = port;
-+
-+ port->channels[channel] = channel;
-+
-+ port->chan_devices[channel] = chan_dev;
-+
-+ spin_unlock_irqrestore(&npe_lock, flags);
-+
-+ return chan_dev;
-+}
-+
-+/*****************************************************************************
-+ * initialization
-+ ****************************************************************************/
-+
-+static struct platform_device gw_avila_hss_device_0 = {
-+ .name = "ixp4xx_hss",
-+ .id = 0,
-+};
-+
-+static struct platform_device gw_avila_hss_device_1 = {
-+ .name = "ixp4xx_hss",
-+ .id = 1,
-+};
-+
-+static struct platform_device *gw_avila_hss_port_0;
-+static struct platform_device *gw_avila_hss_port_1;
-+static u64 hss_dmamask = 0xFFFFFFFF;
-+
-+struct hss_device *hss_init(int id, int channel)
-+{
-+ struct port *port = hss_port[id];
-+ struct hss_device *hdev;
-+ int ret;
-+
-+ if (!lock_init)
-+ {
-+ spin_lock_init(&npe_lock);
-+ lock_init = 1;
-+ npe = npe_request(0);
-+ }
-+
-+ if (!port->init) {
-+ if (id == 0) {
-+ gw_avila_hss_port_0 = platform_device_alloc("hss-port", 0);
-+
-+ platform_set_drvdata(gw_avila_hss_port_0, &gw_avila_hss_device_0);
-+ port->dev = &gw_avila_hss_port_0->dev;
-+
-+ if (!port->dev->dma_mask)
-+ port->dev->dma_mask = &hss_dmamask;
-+ if (!port->dev->coherent_dma_mask)
-+ port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ ret = platform_device_add(gw_avila_hss_port_0);
-+
-+ if (ret)
-+ platform_device_put(gw_avila_hss_port_0);
-+
-+ tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+ }
-+ else
-+ {
-+ gw_avila_hss_port_1 = platform_device_alloc("hss-port", 1);
-+
-+ platform_set_drvdata(gw_avila_hss_port_1, &gw_avila_hss_device_1);
-+ port->dev = &gw_avila_hss_port_1->dev;
-+
-+ if (!port->dev->dma_mask)
-+ port->dev->dma_mask = &hss_dmamask;
-+ if (!port->dev->coherent_dma_mask)
-+ port->dev->coherent_dma_mask = 0xFFFFFFFF;
-+
-+ ret = platform_device_add(gw_avila_hss_port_1);
-+
-+ if (ret)
-+ platform_device_put(gw_avila_hss_port_1);
-+
-+ tasklet_init(&port->task, hss_chan_read, (unsigned long) port);
-+ }
-+
-+ port->init = 1;
-+ port->id = id;
-+ port->clock_type = CLOCK_EXT;
-+ port->clock_rate = 8192000;
-+ port->frame_size = 256; /* E1 */
-+ port->mode = MODE_RAW;
-+ port->next_rx_frame = 0;
-+ memset(port->channels, CHANNEL_UNUSED, sizeof(port->channels));
-+ }
-+
-+ hdev = hss_chan_create(port, channel);
-+
-+ return hdev;
-+}
-+EXPORT_SYMBOL(hss_init);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data)
-+{
-+ BUG_ON(tx_callback == NULL);
-+ hdev->tx_callback = tx_callback;
-+ hdev->tx_data = tx_data;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_set_tx_callback);
-+
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data)
-+{
-+ BUG_ON(rx_callback == NULL);
-+ hdev->rx_callback = rx_callback;
-+ hdev->rx_data = rx_data;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_set_rx_callback);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+ /*
-+ * Period Size and Buffer Size are in Frames which are u32
-+ * We convert the u32 *buf to u8 in order to make channel reads
-+ * and rx_loc easier
-+ */
-+
-+ hdev->rx_buf = (u8 *)buf;
-+ hdev->rx_buffer_size = buffer_size << 2;
-+ hdev->rx_period_size = period_size;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_config_rx_dma);
-+
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size)
-+{
-+ /*
-+ * Period Size and Buffer Size are in Frames which are u32
-+ * We convert the u32 *buf to u8 in order to make channel reads
-+ * and rx_loc easier
-+ */
-+
-+ hdev->tx_buf = (u8 *)buf;
-+ hdev->tx_buffer_size = buffer_size << 2;
-+ hdev->tx_period_size = period_size;
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(hss_config_tx_dma);
-+
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev)
-+{
-+ return hdev->rx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_rx);
-+
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev)
-+{
-+ return hdev->tx_loc >> 2;
-+}
-+EXPORT_SYMBOL(hss_curr_offset_tx);
-+
-+MODULE_AUTHOR("Chris Lang");
-+MODULE_DESCRIPTION("Intel IXP4xx HSS Audio driver");
-+MODULE_LICENSE("GPL v2");
---- /dev/null
-+++ b/sound/soc/gw-avila/ixp4xx_hss.h
-@@ -0,0 +1,401 @@
-+/*
-+ *
-+ *
-+ * Copyright (C) 2009 Gateworks Corporation
-+ *
-+ * This program is free software; you can redistribute it and/or modify it
-+ * under the terms of version 2 of the GNU General Public License
-+ * as published by the Free Software Foundation.
-+ */
-+
-+#include <linux/types.h>
-+#include <linux/bitops.h>
-+#include <linux/dma-mapping.h>
-+#include <linux/dmapool.h>
-+#include <linux/fs.h>
-+#include <linux/io.h>
-+#include <linux/kernel.h>
-+#include <linux/platform_device.h>
-+#include <linux/poll.h>
-+#include <mach/npe.h>
-+#include <mach/qmgr.h>
-+#include <linux/interrupt.h>
-+
-+//#include <linux/hdlc.h> XXX We aren't HDLC
-+
-+#define DEBUG_QUEUES 0
-+#define DEBUG_DESC 0
-+#define DEBUG_RX 0
-+#define DEBUG_TX 0
-+#define DEBUG_PKT_BYTES 0
-+#define DEBUG_CLOSE 0
-+#define DEBUG_FRAMER 0
-+
-+#define DRV_NAME "ixp4xx_hss"
-+
-+#define PKT_EXTRA_FLAGS 0 /* orig 1 */
-+#define TX_FRAME_SYNC_OFFSET 0 /* channelized */
-+#define PKT_NUM_PIPES 1 /* 1, 2 or 4 */
-+#define PKT_PIPE_FIFO_SIZEW 4 /* total 4 dwords per HSS */
-+
-+#define RX_DESCS 512 /* also length of all RX queues */
-+#define TX_DESCS 512 /* also length of all TX queues */
-+
-+//#define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
-+#define RX_SIZE (HDLC_MAX_MRU + 4) /* NPE needs more space */
-+#define MAX_CLOSE_WAIT 1000 /* microseconds */
-+#define HSS_COUNT 2
-+#define MIN_FRAME_SIZE 16 /* bits */
-+#define MAX_FRAME_SIZE 257 /* 256 bits + framing bit */
-+#define MAX_CHANNELS (MAX_FRAME_SIZE / 8)
-+#define MAX_CHAN_DEVICES 32
-+#define CHANNEL_HDLC 0xFE
-+#define CHANNEL_UNUSED 0xFF
-+
-+#define NAPI_WEIGHT 16
-+#define CHAN_RX_TRIGGER 16 /* 8 RX frames = 1 ms @ E1 */
-+#define CHAN_RX_FRAMES 128
-+#define CHAN_RX_TRUNKS 1
-+#define MAX_CHAN_RX_BAD_SYNC (CHAN_RX_TRIGGER / 2 /* pairs */ - 3)
-+
-+#define CHAN_TX_LIST_FRAMES CHAN_RX_TRIGGER /* bytes/channel per list, 16 - 48 */
-+#define CHAN_TX_LISTS 8
-+#define CHAN_TX_TRUNKS CHAN_RX_TRUNKS
-+#define CHAN_TX_FRAMES (CHAN_TX_LIST_FRAMES * CHAN_TX_LISTS)
-+
-+#define CHAN_QUEUE_LEN 32 /* minimum possible */
-+
-+#define chan_rx_buf_len(port) (port->frame_size / 8 * CHAN_RX_FRAMES * CHAN_RX_TRUNKS)
-+#define chan_tx_buf_len(port) (port->frame_size / 8 * CHAN_TX_FRAMES * CHAN_TX_TRUNKS)
-+
-+/* Queue IDs */
-+#define HSS0_CHL_RXTRIG_QUEUE 12 /* orig size = 32 dwords */
-+#define HSS0_PKT_RX_QUEUE 13 /* orig size = 32 dwords */
-+#define HSS0_PKT_TX0_QUEUE 14 /* orig size = 16 dwords */
-+#define HSS0_PKT_TX1_QUEUE 15
-+#define HSS0_PKT_TX2_QUEUE 16
-+#define HSS0_PKT_TX3_QUEUE 17
-+#define HSS0_PKT_RXFREE0_QUEUE 18 /* orig size = 16 dwords */
-+#define HSS0_PKT_RXFREE1_QUEUE 19
-+#define HSS0_PKT_RXFREE2_QUEUE 20
-+#define HSS0_PKT_RXFREE3_QUEUE 21
-+#define HSS0_PKT_TXDONE_QUEUE 22 /* orig size = 64 dwords */
-+
-+#define HSS1_CHL_RXTRIG_QUEUE 10
-+#define HSS1_PKT_RX_QUEUE 0
-+#define HSS1_PKT_TX0_QUEUE 5
-+#define HSS1_PKT_TX1_QUEUE 6
-+#define HSS1_PKT_TX2_QUEUE 7
-+#define HSS1_PKT_TX3_QUEUE 8
-+#define HSS1_PKT_RXFREE0_QUEUE 1
-+#define HSS1_PKT_RXFREE1_QUEUE 2
-+#define HSS1_PKT_RXFREE2_QUEUE 3
-+#define HSS1_PKT_RXFREE3_QUEUE 4
-+#define HSS1_PKT_TXDONE_QUEUE 9
-+
-+#define NPE_PKT_MODE_HDLC 0
-+#define NPE_PKT_MODE_RAW 1
-+#define NPE_PKT_MODE_56KMODE 2
-+#define NPE_PKT_MODE_56KENDIAN_MSB 4
-+
-+/* PKT_PIPE_HDLC_CFG_WRITE flags */
-+#define PKT_HDLC_IDLE_ONES 0x1 /* default = flags */
-+#define PKT_HDLC_CRC_32 0x2 /* default = CRC-16 */
-+#define PKT_HDLC_MSB_ENDIAN 0x4 /* default = LE */
-+
-+
-+/* hss_config, PCRs */
-+/* Frame sync sampling, default = active low */
-+#define PCR_FRM_SYNC_ACTIVE_HIGH 0x40000000
-+#define PCR_FRM_SYNC_FALLINGEDGE 0x80000000
-+#define PCR_FRM_SYNC_RISINGEDGE 0xC0000000
-+
-+/* Frame sync pin: input (default) or output generated off a given clk edge */
-+#define PCR_FRM_SYNC_OUTPUT_FALLING 0x20000000
-+#define PCR_FRM_SYNC_OUTPUT_RISING 0x30000000
-+
-+/* Frame and data clock sampling on edge, default = falling */
-+#define PCR_FCLK_EDGE_RISING 0x08000000
-+#define PCR_DCLK_EDGE_RISING 0x04000000
-+
-+/* Clock direction, default = input */
-+#define PCR_SYNC_CLK_DIR_OUTPUT 0x02000000
-+
-+/* Generate/Receive frame pulses, default = enabled */
-+#define PCR_FRM_PULSE_DISABLED 0x01000000
-+
-+ /* Data rate is full (default) or half the configured clk speed */
-+#define PCR_HALF_CLK_RATE 0x00200000
-+
-+/* Invert data between NPE and HSS FIFOs? (default = no) */
-+#define PCR_DATA_POLARITY_INVERT 0x00100000
-+
-+/* TX/RX endianness, default = LSB */
-+#define PCR_MSB_ENDIAN 0x00080000
-+
-+/* Normal (default) / open drain mode (TX only) */
-+#define PCR_TX_PINS_OPEN_DRAIN 0x00040000
-+
-+/* No framing bit transmitted and expected on RX? (default = framing bit) */
-+#define PCR_SOF_NO_FBIT 0x00020000
-+
-+/* Drive data pins? */
-+#define PCR_TX_DATA_ENABLE 0x00010000
-+
-+/* Voice 56k type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_V56K_HIGH 0x00002000
-+#define PCR_TX_V56K_HIGH_IMP 0x00004000
-+
-+/* Unassigned type: drive the data pins low (default), high, high Z */
-+#define PCR_TX_UNASS_HIGH 0x00000800
-+#define PCR_TX_UNASS_HIGH_IMP 0x00001000
-+
-+/* T1 @ 1.544MHz only: Fbit dictated in FIFO (default) or high Z */
-+#define PCR_TX_FB_HIGH_IMP 0x00000400
-+
-+/* 56k data endiannes - which bit unused: high (default) or low */
-+#define PCR_TX_56KE_BIT_0_UNUSED 0x00000200
-+
-+/* 56k data transmission type: 32/8 bit data (default) or 56K data */
-+#define PCR_TX_56KS_56K_DATA 0x00000100
-+
-+/* hss_config, cCR */
-+/* Number of packetized clients, default = 1 */
-+#define CCR_NPE_HFIFO_2_HDLC 0x04000000
-+#define CCR_NPE_HFIFO_3_OR_4HDLC 0x08000000
-+
-+/* default = no loopback */
-+#define CCR_LOOPBACK 0x02000000
-+
-+/* HSS number, default = 0 (first) */
-+#define CCR_SECOND_HSS 0x01000000
-+
-+
-+/* hss_config, clkCR: main:10, num:10, denom:12 */
-+#define CLK42X_SPEED_EXP ((0x3FF << 22) | ( 2 << 12) | 15) /*65 KHz*/
-+
-+#define CLK42X_SPEED_512KHZ (( 130 << 22) | ( 2 << 12) | 15)
-+#define CLK42X_SPEED_1536KHZ (( 43 << 22) | ( 18 << 12) | 47)
-+#define CLK42X_SPEED_1544KHZ (( 43 << 22) | ( 33 << 12) | 192)
-+#define CLK42X_SPEED_2048KHZ (( 32 << 22) | ( 34 << 12) | 63)
-+#define CLK42X_SPEED_4096KHZ (( 16 << 22) | ( 34 << 12) | 127)
-+#define CLK42X_SPEED_8192KHZ (( 8 << 22) | ( 34 << 12) | 255)
-+
-+#define CLK46X_SPEED_512KHZ (( 130 << 22) | ( 24 << 12) | 127)
-+#define CLK46X_SPEED_1536KHZ (( 43 << 22) | (152 << 12) | 383)
-+#define CLK46X_SPEED_1544KHZ (( 43 << 22) | ( 66 << 12) | 385)
-+#define CLK46X_SPEED_2048KHZ (( 32 << 22) | (280 << 12) | 511)
-+#define CLK46X_SPEED_4096KHZ (( 16 << 22) | (280 << 12) | 1023)
-+#define CLK46X_SPEED_8192KHZ (( 8 << 22) | (280 << 12) | 2047)
-+
-+
-+/* hss_config, LUT entries */
-+#define TDMMAP_UNASSIGNED 0
-+#define TDMMAP_HDLC 1 /* HDLC - packetized */
-+#define TDMMAP_VOICE56K 2 /* Voice56K - 7-bit channelized */
-+#define TDMMAP_VOICE64K 3 /* Voice64K - 8-bit channelized */
-+
-+/* offsets into HSS config */
-+#define HSS_CONFIG_TX_PCR 0x00 /* port configuration registers */
-+#define HSS_CONFIG_RX_PCR 0x04
-+#define HSS_CONFIG_CORE_CR 0x08 /* loopback control, HSS# */
-+#define HSS_CONFIG_CLOCK_CR 0x0C /* clock generator control */
-+#define HSS_CONFIG_TX_FCR 0x10 /* frame configuration registers */
-+#define HSS_CONFIG_RX_FCR 0x14
-+#define HSS_CONFIG_TX_LUT 0x18 /* channel look-up tables */
-+#define HSS_CONFIG_RX_LUT 0x38
-+
-+
-+/* NPE command codes */
-+/* writes the ConfigWord value to the location specified by offset */
-+#define PORT_CONFIG_WRITE 0x40
-+
-+/* triggers the NPE to load the contents of the configuration table */
-+#define PORT_CONFIG_LOAD 0x41
-+
-+/* triggers the NPE to return an HssErrorReadResponse message */
-+#define PORT_ERROR_READ 0x42
-+
-+/* reset NPE internal status and enable the HssChannelized operation */
-+#define CHAN_FLOW_ENABLE 0x43
-+#define CHAN_FLOW_DISABLE 0x44
-+#define CHAN_IDLE_PATTERN_WRITE 0x45
-+#define CHAN_NUM_CHANS_WRITE 0x46
-+#define CHAN_RX_BUF_ADDR_WRITE 0x47
-+#define CHAN_RX_BUF_CFG_WRITE 0x48
-+#define CHAN_TX_BLK_CFG_WRITE 0x49
-+#define CHAN_TX_BUF_ADDR_WRITE 0x4A
-+#define CHAN_TX_BUF_SIZE_WRITE 0x4B
-+#define CHAN_TSLOTSWITCH_ENABLE 0x4C
-+#define CHAN_TSLOTSWITCH_DISABLE 0x4D
-+
-+/* downloads the gainWord value for a timeslot switching channel associated
-+ with bypassNum */
-+#define CHAN_TSLOTSWITCH_GCT_DOWNLOAD 0x4E
-+
-+/* triggers the NPE to reset internal status and enable the HssPacketized
-+ operation for the flow specified by pPipe */
-+#define PKT_PIPE_FLOW_ENABLE 0x50
-+#define PKT_PIPE_FLOW_DISABLE 0x51
-+#define PKT_NUM_PIPES_WRITE 0x52
-+#define PKT_PIPE_FIFO_SIZEW_WRITE 0x53
-+#define PKT_PIPE_HDLC_CFG_WRITE 0x54
-+#define PKT_PIPE_IDLE_PATTERN_WRITE 0x55
-+#define PKT_PIPE_RX_SIZE_WRITE 0x56
-+#define PKT_PIPE_MODE_WRITE 0x57
-+
-+/* HDLC packet status values - desc->status */
-+#define ERR_SHUTDOWN 1 /* stop or shutdown occurrance */
-+#define ERR_HDLC_ALIGN 2 /* HDLC alignment error */
-+#define ERR_HDLC_FCS 3 /* HDLC Frame Check Sum error */
-+#define ERR_RXFREE_Q_EMPTY 4 /* RX-free queue became empty while receiving
-+ this packet (if buf_len < pkt_len) */
-+#define ERR_HDLC_TOO_LONG 5 /* HDLC frame size too long */
-+#define ERR_HDLC_ABORT 6 /* abort sequence received */
-+#define ERR_DISCONNECTING 7 /* disconnect is in progress */
-+
-+#define CLOCK_EXT 0
-+#define CLOCK_INT 1
-+
-+enum mode {MODE_HDLC = 0, MODE_RAW, MODE_G704};
-+enum rx_tx_bit {
-+ TX_BIT = 0,
-+ RX_BIT = 1
-+};
-+enum chan_bit {
-+ CHAN_0 = (1 << 0),
-+ CHAN_1 = (1 << 1),
-+ CHAN_2 = (1 << 2),
-+ CHAN_3 = (1 << 3),
-+ CHAN_4 = (1 << 4),
-+ CHAN_5 = (1 << 5),
-+ CHAN_6 = (1 << 6),
-+ CHAN_7 = (1 << 7),
-+ CHAN_8 = (1 << 8),
-+ CHAN_9 = (1 << 9),
-+ CHAN_10 = (1 << 10),
-+ CHAN_11 = (1 << 11),
-+ CHAN_12 = (1 << 12),
-+ CHAN_13 = (1 << 13),
-+ CHAN_14 = (1 << 14),
-+ CHAN_15 = (1 << 15)
-+};
-+
-+enum alignment { NOT_ALIGNED = 0, EVEN_FIRST, ODD_FIRST };
-+
-+#ifdef __ARMEB__
-+typedef struct sk_buff buffer_t;
-+#define free_buffer dev_kfree_skb
-+#define free_buffer_irq dev_kfree_skb_irq
-+#else
-+typedef void buffer_t;
-+#define free_buffer kfree
-+#define free_buffer_irq kfree
-+#endif
-+
-+struct hss_device {
-+ struct port *port;
-+ unsigned int open_count, excl_open;
-+ unsigned long tx_loc, rx_loc; /* bytes */
-+ unsigned long tx_frame, rx_frame; /* Frames */
-+ u8 id, chan_count;
-+ u8 log_channels[MAX_CHANNELS];
-+
-+ u8 *rx_buf;
-+ u8 *tx_buf;
-+
-+ size_t rx_buffer_size;
-+ size_t rx_period_size;
-+ size_t tx_buffer_size;
-+ size_t tx_period_size;
-+
-+ void (*rx_callback)(void *data);
-+ void *rx_data;
-+ void (*tx_callback)(void *data);
-+ void *tx_data;
-+ void *private_data;
-+};
-+
-+extern struct hss_device *hss_handle[32];
-+extern struct port *hss_port[2];
-+
-+struct port {
-+ unsigned char init;
-+
-+ struct device *dev;
-+
-+ struct tasklet_struct task;
-+ unsigned int id;
-+ unsigned long chan_rx_bitmap;
-+ unsigned long chan_tx_bitmap;
-+ unsigned char chan_open;
-+
-+ /* the following fields must be protected by npe_lock */
-+ enum mode mode;
-+ unsigned int clock_type, clock_rate, loopback;
-+ unsigned int frame_size, frame_sync_offset;
-+ unsigned int next_rx_frame;
-+
-+ struct hss_device *chan_devices[MAX_CHAN_DEVICES];
-+ u32 chan_tx_buf_phys, chan_rx_buf_phys;
-+ u32 chan_tx_pointers_phys;
-+ u32 *chan_tx_pointers;
-+ u8 *chan_rx_buf;
-+ u8 *chan_tx_buf;
-+ u8 *tx_lists[CHAN_TX_LISTS][8];
-+ u8 *rx_frames[8][CHAN_TX_LISTS];
-+ unsigned int chan_open_count, hdlc_open;
-+ unsigned int chan_started, initialized, just_set_offset;
-+ unsigned int chan_last_rx, chan_last_tx;
-+
-+ /* assigned channels, may be invalid with given frame length or mode */
-+ u8 channels[MAX_CHANNELS];
-+ int msg_count;
-+};
-+
-+/* NPE message structure */
-+struct msg {
-+#ifdef __ARMEB__
-+ u8 cmd, unused, hss_port, index;
-+ union {
-+ struct { u8 data8a, data8b, data8c, data8d; };
-+ struct { u16 data16a, data16b; };
-+ struct { u32 data32; };
-+ };
-+#else
-+ u8 index, hss_port, unused, cmd;
-+ union {
-+ struct { u8 data8d, data8c, data8b, data8a; };
-+ struct { u16 data16b, data16a; };
-+ struct { u32 data32; };
-+ };
-+#endif
-+};
-+
-+#define rx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ (n) * sizeof(struct desc))
-+#define rx_desc_ptr(port, n) (&(port)->desc_tab[n])
-+
-+#define tx_desc_phys(port, n) ((port)->desc_tab_phys + \
-+ ((n) + RX_DESCS) * sizeof(struct desc))
-+#define tx_desc_ptr(port, n) (&(port)->desc_tab[(n) + RX_DESCS])
-+
-+int hss_prepare_chan(struct port *port);
-+void hss_chan_stop(struct port *port);
-+
-+struct hss_device *hss_init(int id, int channel);
-+int hss_chan_open(struct hss_device *hdev);
-+int hss_chan_close(struct hss_device *hdev);
-+
-+int hss_set_tx_callback(struct hss_device *hdev, void (*tx_callback)(void *), void *tx_data);
-+int hss_set_rx_callback(struct hss_device *hdev, void (*rx_callback)(void *), void *rx_data);
-+int hss_tx_start(struct hss_device *hdev);
-+int hss_tx_stop(struct hss_device *hdev);
-+int hss_rx_start(struct hss_device *hdev);
-+int hss_rx_stop(struct hss_device *hdev);
-+
-+int hss_config_rx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+int hss_config_tx_dma(struct hss_device *hdev, void *buf, size_t buffer_size, size_t period_size);
-+unsigned long hss_curr_offset_rx(struct hss_device *hdev);
-+unsigned long hss_curr_offset_tx(struct hss_device *hdev);
-+
diff --git a/target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch b/target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch
deleted file mode 100644
index 80c4ba08de..0000000000
--- a/target/linux/ixp4xx/patches-3.10/180-tw5334_support.patch
+++ /dev/null
@@ -1,287 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -164,6 +164,14 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW5334
-+ bool "Titan Wireless TW-533-4"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW533-4. For more information on this platform,
-+ see http://openwrt.org
-+
- config MACH_NAS100D
- bool
- prompt "NAS100D"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -24,6 +24,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-
- obj-y += common.o
-
-@@ -49,6 +50,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,7 @@ static __inline__ void __arch_decomp_set
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-- machine_is_wrt300nv2())
-+ machine_is_wrt300nv2() || machine_is_tw5334())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
-@@ -0,0 +1,68 @@
-+/*
-+ * arch/arch/mach-ixp4xx/tw5334-pci.c
-+ *
-+ * PCI setup routines for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init tw5334_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw5334_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 12)
-+ return IRQ_IXP4XX_GPIO6;
-+ else if (slot == 13)
-+ return IRQ_IXP4XX_GPIO2;
-+ else if (slot == 14)
-+ return IRQ_IXP4XX_GPIO1;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO0;
-+ else return -1;
-+}
-+
-+struct hw_pci tw5334_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw5334_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = tw5334_map_irq,
-+};
-+
-+int __init tw5334_pci_init(void)
-+{
-+ if (machine_is_tw5334())
-+ pci_common_init(&tw5334_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw5334_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
-@@ -0,0 +1,167 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw5334-setup.c
-+ *
-+ * Board setup for the Titan Wireless TW-533-4
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data tw5334_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw5334_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw5334_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw5334_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_flash_resource,
-+};
-+
-+static struct resource tw5334_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port tw5334_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw5334_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = tw5334_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw5334_uart_resource,
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw5334_plat_eth[] = {
-+ {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw5334_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw5334_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw5334_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *tw5334_devices[] __initdata = {
-+ &tw5334_flash,
-+ &tw5334_uart,
-+ &tw5334_eth[0],
-+ &tw5334_eth[1],
-+};
-+
-+static void __init tw5334_init(void)
-+{
-+ uint8_t __iomem *f;
-+ int i;
-+
-+ ixp4xx_sys_init();
-+
-+ tw5334_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw5334_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(tw5334_devices, ARRAY_SIZE(tw5334_devices));
-+
-+ /*
-+ * Map in a portion of the flash and read the MAC addresses.
-+ * Since it is stored in BE in the flash itself, we need to
-+ * byteswap it if we're in LE mode.
-+ */
-+ f = ioremap(IXP4XX_EXP_BUS_BASE(0), 0x1000000);
-+ if (f) {
-+ for (i = 0; i < 6; i++) {
-+#ifdef __ARMEB__
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + i);
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + i);
-+#else
-+ tw5334_plat_eth[0].hwaddr[i] = readb(f + 0xFC0422 + (i^3));
-+ tw5334_plat_eth[1].hwaddr[i] = readb(f + 0xFC043B + (i^3));
-+#endif
-+ }
-+ iounmap(f);
-+ }
-+
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 0\n",
-+ tw5334_plat_eth[0].hwaddr);
-+ printk(KERN_INFO "TW-533-4: Using MAC address %pM for port 1\n",
-+ tw5334_plat_eth[1].hwaddr);
-+}
-+
-+#ifdef CONFIG_MACH_TW5334
-+MACHINE_START(TW5334, "Titan Wireless TW-533-4")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = tw5334_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch b/target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch
deleted file mode 100644
index 44b316ef4d..0000000000
--- a/target/linux/ixp4xx/patches-3.10/185-mi424wr_support.patch
+++ /dev/null
@@ -1,507 +0,0 @@
---- a/arch/arm/configs/ixp4xx_defconfig
-+++ b/arch/arm/configs/ixp4xx_defconfig
-@@ -26,6 +26,7 @@ CONFIG_MACH_NAS100D=y
- CONFIG_MACH_DSMG600=y
- CONFIG_MACH_FSG=y
- CONFIG_MACH_GTWX5715=y
-+CONFIG_MACH_MI424WR=y
- CONFIG_IXP4XX_QMGR=y
- CONFIG_IXP4XX_NPE=y
- # CONFIG_ARM_THUMB is not set
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -262,6 +262,13 @@ config MACH_MIC256
- Say 'Y' here if you want your kernel to support the MIC256
- board from OMICRON electronics GmbH.
-
-+config MACH_MI424WR
-+ bool "Actiontec MI424WR"
-+ depends on ARCH_IXP4XX
-+ select PCI
-+ help
-+ Add support for the Actiontec MI424-WR.
-+
- comment "IXP4xx Options"
-
- config IXP4XX_INDIRECT_PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixd
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
-+obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-
- obj-y += common.o
-
-@@ -51,6 +52,7 @@ obj-$(CONFIG_MACH_COMPEXWP18) += compex4
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
-+obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-pci.c
-@@ -0,0 +1,70 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-pci.c
-+ *
-+ * Actiontec MI424WR board-level PCI initialization
-+ *
-+ * Copyright (C) 2008 Jose Vasconcellos
-+ *
-+ * Maintainer: Jose Vasconcellos <jvasco@verizon.net>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <asm/mach/pci.h>
-+
-+/* PCI controller GPIO to IRQ pin mappings
-+ * This information was obtained from Actiontec's GPL release.
-+ *
-+ * INTA INTB
-+ * SLOT 13 8 6
-+ * SLOT 14 7 8
-+ * SLOT 15 6 7
-+ */
-+
-+void __init mi424wr_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO6, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init mi424wr_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 13)
-+ return IRQ_IXP4XX_GPIO8;
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ if (slot == 15)
-+ return IRQ_IXP4XX_GPIO6;
-+
-+ return -1;
-+}
-+
-+struct hw_pci mi424wr_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = mi424wr_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = mi424wr_map_irq,
-+};
-+
-+int __init mi424wr_pci_init(void)
-+{
-+ if (machine_is_mi424wr())
-+ pci_common_init(&mi424wr_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(mi424wr_pci_init);
-+
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/mi424wr-setup.c
-@@ -0,0 +1,387 @@
-+/*
-+ * arch/arm/mach-ixp4xx/mi424wr-setup.c
-+ *
-+ * Actiontec MI424-WR board setup
-+ * Copyright (c) 2008 Jose Vasconcellos
-+ *
-+ * Based on Gemtek GTWX5715 by
-+ * Copyright (C) 2004 George T. Joseph
-+ * Derived from Coyote
-+ *
-+ * This program is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License
-+ * as published by the Free Software Foundation; either version 2
-+ * of the License, or (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-+ *
-+ */
-+
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/leds.h>
-+#include <linux/spi/spi_gpio_old.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <asm/system_info.h>
-+#include <asm/irq.h>
-+#include <asm/io.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/*
-+ * GPIO 2,3,4 and 9 are hard wired to the Micrel/Kendin KS8995M Switch
-+ * and operate as an SPI type interface. The details of the interface
-+ * are available on Kendin/Micrel's web site.
-+ */
-+
-+#define MI424WR_KSSPI_SELECT 9
-+#define MI424WR_KSSPI_TXD 4
-+#define MI424WR_KSSPI_CLOCK 2
-+#define MI424WR_KSSPI_RXD 3
-+
-+/*
-+ * The "reset" button is wired to GPIO 10.
-+ * The GPIO is brought "low" when the button is pushed.
-+ */
-+
-+#define MI424WR_BUTTON_GPIO 10
-+#define MI424WR_BUTTON_IRQ IRQ_IXP4XX_GPIO10
-+
-+#define MI424WR_MOCA_WAN_LED 11
-+
-+/* Latch on CS1 - taken from Actiontec's 2.4 source code
-+ *
-+ * default latch value
-+ * 0 - power alarm led (red) 0 (off)
-+ * 1 - power led (green) 0 (off)
-+ * 2 - wireless led (green) 1 (off)
-+ * 3 - no internet led (red) 0 (off)
-+ * 4 - internet ok led (green) 0 (off)
-+ * 5 - moca LAN 0 (off)
-+ * 6 - WAN alarm led (red) 0 (off)
-+ * 7 - PCI reset 1 (not reset)
-+ * 8 - IP phone 1 led (green) 1 (off)
-+ * 9 - IP phone 2 led (green) 1 (off)
-+ * 10 - VOIP ready led (green) 1 (off)
-+ * 11 - PSTN relay 1 control 0 (PSTN)
-+ * 12 - PSTN relay 1 control 0 (PSTN)
-+ * 13 - N/A
-+ * 14 - N/A
-+ * 15 - N/A
-+ */
-+
-+#define MI424WR_LATCH_MASK 0x04
-+#define MI424WR_LATCH_DEFAULT 0x1f86
-+
-+#define MI424WR_LATCH_ALARM_LED 0x00
-+#define MI424WR_LATCH_POWER_LED 0x01
-+#define MI424WR_LATCH_WIRELESS_LED 0x02
-+#define MI424WR_LATCH_INET_DOWN_LED 0x03
-+#define MI424WR_LATCH_INET_OK_LED 0x04
-+#define MI424WR_LATCH_MOCA_LAN_LED 0x05
-+#define MI424WR_LATCH_WAN_ALARM_LED 0x06
-+#define MI424WR_LATCH_PCI_RESET 0x07
-+#define MI424WR_LATCH_PHONE1_LED 0x08
-+#define MI424WR_LATCH_PHONE2_LED 0x09
-+#define MI424WR_LATCH_VOIP_LED 0x10
-+#define MI424WR_LATCH_PSTN_RELAY1 0x11
-+#define MI424WR_LATCH_PSTN_RELAY2 0x12
-+
-+/* initialize CS1 to default timings, Intel style, 16-bit bus */
-+#define MI424WR_CS1_CONFIG 0x80000002
-+
-+/* Define both UARTs but they are not easily accessible.
-+ */
-+
-+static struct resource mi424wr_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+ }
-+};
-+
-+
-+static struct plat_serial8250_port mi424wr_uart_platform_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device mi424wr_uart_device = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = mi424wr_uart_platform_data,
-+ .num_resources = ARRAY_SIZE(mi424wr_uart_resources),
-+ .resource = mi424wr_uart_resources,
-+};
-+
-+static struct flash_platform_data mi424wr_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource mi424wr_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device mi424wr_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_flash_data,
-+ .num_resources = 1,
-+ .resource = &mi424wr_flash_resource,
-+};
-+
-+static int mi424wr_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data mi424wr_spi_bus_data = {
-+ .pin_cs = MI424WR_KSSPI_SELECT,
-+ .pin_clk = MI424WR_KSSPI_CLOCK,
-+ .pin_miso = MI424WR_KSSPI_RXD,
-+ .pin_mosi = MI424WR_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = mi424wr_spi_boardinfo_setup,
-+};
-+
-+static struct gpio_led mi424wr_gpio_led[] = {
-+ {
-+ .name = "moca-wan", /* green led */
-+ .gpio = MI424WR_MOCA_WAN_LED,
-+ .active_low = 0,
-+ }
-+};
-+
-+static struct gpio_led_platform_data mi424wr_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = mi424wr_gpio_led,
-+};
-+
-+static struct platform_device mi424wr_gpio_leds = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_gpio_leds_data,
-+};
-+
-+static uint16_t latch_value = MI424WR_LATCH_DEFAULT;
-+static uint16_t __iomem *iobase;
-+
-+static void mi424wr_latch_set_led(u8 bit, enum led_brightness value)
-+{
-+
-+ if (((MI424WR_LATCH_MASK >> bit) & 1) ^ (value == LED_OFF))
-+ latch_value &= ~(0x1 << bit);
-+ else
-+ latch_value |= (0x1 << bit);
-+
-+ __raw_writew(latch_value, iobase);
-+
-+}
-+
-+static struct latch_led mi424wr_latch_led[] = {
-+ {
-+ .name = "power-alarm",
-+ .bit = MI424WR_LATCH_ALARM_LED,
-+ },
-+ {
-+ .name = "power-ok",
-+ .bit = MI424WR_LATCH_POWER_LED,
-+ },
-+ {
-+ .name = "wireless", /* green led */
-+ .bit = MI424WR_LATCH_WIRELESS_LED,
-+ },
-+ {
-+ .name = "inet-down", /* red led */
-+ .bit = MI424WR_LATCH_INET_DOWN_LED,
-+ },
-+ {
-+ .name = "inet-up", /* green led */
-+ .bit = MI424WR_LATCH_INET_OK_LED,
-+ },
-+ {
-+ .name = "moca-lan", /* green led */
-+ .bit = MI424WR_LATCH_MOCA_LAN_LED,
-+ },
-+ {
-+ .name = "wan-alarm", /* red led */
-+ .bit = MI424WR_LATCH_WAN_ALARM_LED,
-+ }
-+};
-+
-+static struct latch_led_platform_data mi424wr_latch_leds_data = {
-+ .num_leds = ARRAY_SIZE(mi424wr_latch_led),
-+ .mem = 0x51000000,
-+ .leds = mi424wr_latch_led,
-+ .set_led = mi424wr_latch_set_led,
-+};
-+
-+static struct platform_device mi424wr_latch_leds = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &mi424wr_latch_leds_data,
-+};
-+
-+static struct platform_device mi424wr_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev.platform_data = &mi424wr_spi_bus_data,
-+};
-+
-+static struct eth_plat_info mi424wr_wan_data = {
-+ .phy = 17, /* KS8721 */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info mi424wr_lan_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device mi424wr_npe_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_lan_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_wan_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct eth_plat_info mi424wr_wanD_data = {
-+ .phy = 5,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info mi424wr_lanD_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct platform_device mi424wr_npeD_devices[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &mi424wr_lanD_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &mi424wr_wanD_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *mi424wr_devices[] __initdata = {
-+ &mi424wr_uart_device,
-+ &mi424wr_flash,
-+ &mi424wr_gpio_leds,
-+ &mi424wr_latch_leds,
-+ &mi424wr_spi_bus,
-+};
-+
-+static void __init mi424wr_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ mi424wr_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ mi424wr_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_8M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = MI424WR_CS1_CONFIG;
-+
-+ /* configure button as input
-+ */
-+ gpio_line_config(MI424WR_BUTTON_GPIO, IXP4XX_GPIO_IN);
-+
-+ /* Initialize LEDs and enables PCI bus.
-+ */
-+ iobase = ioremap_nocache(IXP4XX_EXP_BUS_BASE(1), 0x1000);
-+ __raw_writew(latch_value, iobase);
-+
-+ platform_add_devices(mi424wr_devices, ARRAY_SIZE(mi424wr_devices));
-+
-+ /* Need to figure out how to detect revD.
-+ * Look for a revision argument sent by redboot.
-+ */
-+#define revD 4
-+ if (system_rev == revD) {
-+ platform_device_register(&mi424wr_npeD_devices[0]);
-+ platform_device_register(&mi424wr_npeD_devices[1]);
-+ } else {
-+ platform_device_register(&mi424wr_npe_devices[0]);
-+ platform_device_register(&mi424wr_npe_devices[1]);
-+ }
-+}
-+
-+
-+MACHINE_START(MI424WR, "Actiontec MI424WR")
-+ /* Maintainer: Jose Vasconcellos */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = mi424wr_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+
diff --git a/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch b/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch
deleted file mode 100644
index c3de81a117..0000000000
--- a/target/linux/ixp4xx/patches-3.10/190-cambria_support.patch
+++ /dev/null
@@ -1,1131 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
- Avila Network Platform. For more information on this platform,
- see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_CAMBRIA
-+ bool "Cambria"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Gateworks
-+ Cambria series. For more information on this platform,
-+ see <file:Documentation/arm/IXP4xx>.
-+
- config MACH_LOFT
- bool "Loft"
- depends on MACH_AVILA
-@@ -222,7 +230,7 @@ config CPU_IXP46X
-
- config CPU_IXP43X
- bool
-- depends on MACH_KIXRP435
-+ depends on MACH_KIXRP435 || MACH_CAMBRIA
- default y
-
- config MACH_GTWX5715
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
-
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
-+obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
- obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
- obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
- obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -31,6 +32,7 @@ obj-y += common.o
-
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
-+obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
- obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
- obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
- obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-pci.c
-@@ -0,0 +1,78 @@
-+/*
-+ * arch/arch/mach-ixp4xx/cambria-pci.c
-+ *
-+ * PCI setup routines for Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+
-+#include <asm/mach/pci.h>
-+
-+extern void ixp4xx_pci_preinit(void);
-+extern int ixp4xx_setup(int nr, struct pci_sys_data *sys);
-+extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys);
-+
-+void __init cambria_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init cambria_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else if (slot == 4)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 6)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+
-+ else return -1;
-+}
-+
-+struct hw_pci cambria_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = cambria_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = cambria_map_irq,
-+};
-+
-+int __init cambria_pci_init(void)
-+{
-+ if (machine_is_cambria())
-+ pci_common_init(&cambria_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(cambria_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/cambria-setup.c
-@@ -0,0 +1,1003 @@
-+/*
-+ * arch/arm/mach-ixp4xx/cambria-setup.c
-+ *
-+ * Board setup for the Gateworks Cambria series
-+ *
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * Copyright (C) 2012 Gateworks Corporation <support@gateworks.com>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <kaloz@openwrt.org>
-+ * Tim Harvey <tharvey@gateworks.com>
-+ */
-+
-+#include <linux/device.h>
-+#include <linux/gpio_keys.h>
-+#include <linux/gpio.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/i2c/gw_i2c_pld.h>
-+#include <linux/i2c/pca953x.h>
-+#include <linux/if_ether.h>
-+#include <linux/init.h>
-+#include <linux/input.h>
-+#include <linux/kernel.h>
-+#include <linux/leds.h>
-+#include <linux/memory.h>
-+#include <linux/netdevice.h>
-+#include <linux/serial.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/socket.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/irq.h>
-+#include <linux/usb/ehci_pdriver.h>
-+
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+#include <asm/setup.h>
-+
-+#define ARRAY_AND_SIZE(x) (x), ARRAY_SIZE(x)
-+
-+struct cambria_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct cambria_board_info *cambria_info __initdata;
-+
-+static struct flash_platform_data cambria_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource cambria_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device cambria_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_flash_resource,
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_data = {
-+ .sda_pin = 7,
-+ .scl_pin = 6,
-+};
-+
-+static struct platform_device cambria_i2c_gpio = {
-+ .name = "i2c-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_data,
-+ },
-+};
-+
-+#ifdef SFP_SERIALID
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpa_data = {
-+ .sda_pin = 113,
-+ .scl_pin = 112,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpa = {
-+ .name = "i2c-gpio",
-+ .id = 1,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpa_data,
-+ },
-+};
-+
-+static struct i2c_gpio_platform_data cambria_i2c_gpio_sfpb_data = {
-+ .sda_pin = 115,
-+ .scl_pin = 114,
-+ .sda_is_open_drain = 0,
-+ .scl_is_open_drain = 0,
-+};
-+
-+static struct platform_device cambria_i2c_gpio_sfpb = {
-+ .name = "i2c-gpio",
-+ .id = 2,
-+ .dev = {
-+ .platform_data = &cambria_i2c_gpio_sfpb_data,
-+ },
-+};
-+#endif // #ifdef SFP_SERIALID
-+
-+static struct eth_plat_info cambria_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct eth_plat_info cambria_npea_data = {
-+ .phy = 2,
-+ .rxq = 2,
-+ .txreadyq = 19,
-+};
-+
-+static struct platform_device cambria_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &cambria_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device cambria_npea_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEA,
-+ .dev.platform_data = &cambria_npea_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct resource cambria_uart_resource = {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port cambria_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = cambria_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &cambria_uart_resource,
-+};
-+
-+static struct resource cambria_optional_uart_resources[] = {
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x52000000,
-+ .end = 0x52000fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = 0x53000000,
-+ .end = 0x53000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port cambria_optional_uart_data[] = {
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM_DELAY,
-+ .regshift = 0,
-+ .uartclk = 1843200,
-+ .rw_delay = 10,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ {
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ },
-+ { },
-+};
-+
-+static struct platform_device cambria_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = cambria_optional_uart_data,
-+ .num_resources = 2,
-+ .resource = cambria_optional_uart_resources,
-+};
-+
-+static struct resource cambria_pata_resources[] = {
-+ {
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .name = "intrq",
-+ .start = IRQ_IXP4XX_GPIO12,
-+ .end = IRQ_IXP4XX_GPIO12,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct ixp4xx_pata_data cambria_pata_data = {
-+ .cs0_bits = 0xbfff3c03,
-+ .cs1_bits = 0xbfff3c03,
-+};
-+
-+static struct platform_device cambria_pata = {
-+ .name = "pata_ixp4xx_cf",
-+ .id = 0,
-+ .dev.platform_data = &cambria_pata_data,
-+ .num_resources = ARRAY_SIZE(cambria_pata_resources),
-+ .resource = cambria_pata_resources,
-+};
-+
-+static struct gpio_led cambria_gpio_leds[] = {
-+ {
-+ .name = "user",
-+ .gpio = 5,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user2",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user3",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "user4",
-+ .gpio = 0,
-+ .active_low = 1,
-+ }
-+};
-+
-+static struct gpio_led_platform_data cambria_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = cambria_gpio_leds,
-+};
-+
-+static struct platform_device cambria_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_leds_data,
-+};
-+
-+static struct resource cambria_gpio_resources[] = {
-+ {
-+ .name = "gpio",
-+ .flags = 0,
-+ },
-+};
-+
-+static struct gpio cambria_gpios_gw2350[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "ARM_DIO0" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 12, GPIOF_OUT_INIT_HIGH, "WDOGEN#" },
-+#endif
-+ { 8, GPIOF_IN, "ARM_DIO8" },
-+ { 9, GPIOF_IN, "ARM_DIO9" },
-+};
-+
-+static struct gpio cambria_gpios_gw2358[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*VINLOW#" },
-+ { 2, GPIOF_IN, "*GPS_PPS" },
-+ { 3, GPIOF_IN, "*GPS_IRQ#" },
-+ { 4, GPIOF_IN, "*RS485_IRQ#" },
-+ { 5, GPIOF_IN, "*SER_EN#" },
-+ { 14, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+};
-+
-+static struct gpio cambria_gpios_gw2359[] = {
-+ // ARM GPIO
-+#if 0 // configured from bootloader
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 1, GPIOF_IN, "ARM_DIO1" },
-+ { 2, GPIOF_IN, "ARM_DIO2" },
-+ { 3, GPIOF_IN, "ARM_DIO3" },
-+ { 4, GPIOF_IN, "ARM_DIO4" },
-+ { 5, GPIOF_IN, "ARM_DIO5" },
-+ { 8, GPIOF_OUT_INIT_HIGH, "*WDOGEN#" },
-+#endif
-+ { 11, GPIOF_OUT_INIT_HIGH, "*SER_EN" }, // console serial enable
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {103, GPIOF_OUT_INIT_HIGH, "*5V_EN" }, // 5V aux supply enable
-+ {108, GPIOF_IN, "*SMUXDA0" },
-+ {109, GPIOF_IN, "*SMUXDA1" },
-+ {110, GPIOF_IN, "*SMUXDA2" },
-+ {111, GPIOF_IN, "*SMUXDB0" },
-+ {112, GPIOF_IN, "*SMUXDB1" },
-+ {113, GPIOF_IN, "*SMUXDB2" },
-+ // PCA GPIO
-+ {118, GPIOF_IN, "*USIM2_DET#"}, // USIM2 Detect
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCI, 0=FP)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCI, 0=FP)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {123, GPIOF_OUT_INIT_HIGH, "*COM1_DTR#" }, // J21/J10
-+ {124, GPIOF_IN, "*COM1_DSR#" }, // J21/J10
-+ {127, GPIOF_IN, "PCA_DIO0" },
-+ {128, GPIOF_IN, "PCA_DIO1" },
-+ {129, GPIOF_IN, "PCA_DIO2" },
-+ {130, GPIOF_IN, "PCA_DIO3" },
-+ {131, GPIOF_IN, "PCA_DIO4" },
-+};
-+
-+static struct gpio cambria_gpios_gw2360[] = {
-+ // ARM GPIO
-+ { 0, GPIOF_IN, "*PCA_IRQ#" },
-+ { 11, GPIOF_OUT_INIT_LOW, "*SER0_EN#" },
-+ { 12, GPIOF_IN, "*GSC_IRQ#" },
-+ { 13, GPIOF_OUT_INIT_HIGH, "*PCIE_RST#"},
-+ // GSC GPIO
-+#if !(IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ {100, GPIOF_IN, "*USER_PB#" },
-+#endif
-+ {108, GPIOF_OUT_INIT_LOW, "*ENET1_EN#" }, // ENET1 TX Enable
-+ {109, GPIOF_IN, "*ENET1_PRES#" }, // ENET1 Detect (0=SFP present)
-+ {110, GPIOF_OUT_INIT_LOW, "*ENET2_EN#" }, // ENET2 TX Enable
-+ {111, GPIOF_IN, "*ENET2_PRES#"}, // ENET2 Detect (0=SFP present)
-+ // PCA GPIO
-+ {116, GPIOF_OUT_INIT_HIGH, "*USIM2_LOC"}, // USIM2 Select (1=Loc, 0=Rem)
-+ {117, GPIOF_IN, "*USIM2_DET_LOC#" },// USIM2 Detect (Local Slot)
-+ {118, GPIOF_IN, "*USIM2_DET_REM#" },// USIM2 Detect (Remote Slot)
-+ {120, GPIOF_OUT_INIT_LOW, "*USB1_PCI_SEL"}, // USB1 Select (1=PCIe1, 0=J1)
-+ {121, GPIOF_OUT_INIT_LOW, "*USB2_PCI_SEL"}, // USB2 Select (1=PCIe2, 0=J1)
-+ {122, GPIOF_IN, "*USIM1_DET#"}, // USIM1 Detect
-+ {127, GPIOF_IN, "DIO0" },
-+ {128, GPIOF_IN, "DIO1" },
-+ {129, GPIOF_IN, "DIO2" },
-+ {130, GPIOF_IN, "DIO3" },
-+ {131, GPIOF_IN, "DIO4" },
-+};
-+
-+static struct latch_led cambria_latch_leds[] = {
-+ {
-+ .name = "ledA", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "ledB", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "ledC", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "ledD", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "ledE", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "ledF", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "ledG", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "ledH", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data cambria_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = cambria_latch_leds,
-+ .mem = 0x53F40000,
-+};
-+
-+static struct platform_device cambria_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &cambria_latch_leds_data,
-+};
-+
-+static struct resource cambria_usb0_resources[] = {
-+ {
-+ .start = 0xCD000000,
-+ .end = 0xCD000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 32,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static struct resource cambria_usb1_resources[] = {
-+ {
-+ .start = 0xCE000000,
-+ .end = 0xCE000300,
-+ .flags = IORESOURCE_MEM,
-+ },
-+ {
-+ .start = 33,
-+ .flags = IORESOURCE_IRQ,
-+ },
-+};
-+
-+static u64 ehci_dma_mask = ~(u32)0;
-+
-+static struct usb_ehci_pdata cambria_usb_pdata = {
-+ .big_endian_desc = 1,
-+ .big_endian_mmio = 1,
-+ .has_tt = 1,
-+ .caps_offset = 0x100,
-+};
-+
-+static struct platform_device cambria_usb0_device = {
-+ .name = "ehci-platform",
-+ .id = 0,
-+ .resource = cambria_usb0_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb0_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &cambria_usb_pdata,
-+ },
-+};
-+
-+static struct platform_device cambria_usb1_device = {
-+ .name = "ehci-platform",
-+ .id = 1,
-+ .resource = cambria_usb1_resources,
-+ .num_resources = ARRAY_SIZE(cambria_usb1_resources),
-+ .dev = {
-+ .dma_mask = &ehci_dma_mask,
-+ .coherent_dma_mask = 0xffffffff,
-+ .platform_data = &cambria_usb_pdata,
-+ },
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data0 = {
-+ .gpio_base = 16,
-+ .nr_gpio = 8,
-+};
-+
-+static struct gw_i2c_pld_platform_data gw_i2c_pld_data1 = {
-+ .gpio_base = 24,
-+ .nr_gpio = 2,
-+};
-+
-+
-+static struct gpio_keys_button cambria_gpio_buttons[] = {
-+ {
-+ .desc = "user",
-+ .type = EV_KEY,
-+ .code = BTN_0,
-+ .debounce_interval = 6,
-+ .gpio = 25,
-+ }
-+};
-+
-+static struct gpio_keys_platform_data cambria_gpio_buttons_data = {
-+ .poll_interval = 500,
-+ .nbuttons = 1,
-+ .buttons = cambria_gpio_buttons,
-+};
-+
-+static struct platform_device cambria_gpio_buttons_device = {
-+ .name = "gpio-keys-polled",
-+ .id = -1,
-+ .dev.platform_data = &cambria_gpio_buttons_data,
-+};
-+
-+static struct platform_device *cambria_devices[] __initdata = {
-+ &cambria_i2c_gpio,
-+ &cambria_flash,
-+ &cambria_uart,
-+};
-+
-+static int cambria_register_gpio(struct gpio *array, size_t num)
-+{
-+ int i, err, ret;
-+
-+ ret = 0;
-+ for (i = 0; i < num; i++, array++) {
-+ const char *label = array->label;
-+ if (label[0] == '*')
-+ label++;
-+ err = gpio_request_one(array->gpio, array->flags, label);
-+ if (err)
-+ ret = err;
-+ else {
-+ err = gpio_export(array->gpio, array->label[0] != '*');
-+ }
-+ }
-+ return ret;
-+}
-+
-+static void __init cambria_gw23xx_setup(void)
-+{
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+}
-+
-+static void __init cambria_gw2350_setup(void)
-+{
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x52FF0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52FF0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53FF0000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53FF0000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 0) | (1 << 1) | (1 << 2) | (1 << 3) | (1 << 4) |\
-+ (1 << 5) | (1 << 8) | (1 << 9) | (1 << 12);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2350));
-+}
-+
-+static void __init cambria_gw2358_setup(void)
-+{
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43; // bit0 = 16bit vs 8bit bus
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[0].mapbase = 0x53FC0000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x53FC0000, 0x0fff);
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO3;
-+
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+ cambria_optional_uart_data[1].mapbase = 0x53F80000;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53F80000, 0x0fff);
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO4;
-+
-+ cambria_gpio_resources[0].start = (1 << 14) | (1 << 16) | (1 << 17) | (1 << 18) |\
-+ (1 << 19) | (1 << 20) | (1 << 24) | (1 << 25);
-+ cambria_gpio_resources[0].end = cambria_gpio_resources[0].start;
-+
-+ platform_device_register(&cambria_optional_uart);
-+
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ platform_device_register(&cambria_pata);
-+
-+ cambria_gpio_leds[0].gpio = 24;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+ platform_device_register(&cambria_latch_leds_device);
-+
-+ platform_device_register(&cambria_gpio_buttons_device);
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2358));
-+}
-+
-+static void __init cambria_gw2359_setup(void)
-+{
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the genphy driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ // CPU NPE-C is in bridge bypass mode to Port4 PHY@0x14
-+ cambria_npec_data.phy = 0x14;
-+#endif
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125; // PNLLED1#
-+ cambria_gpio_leds[1].gpio = 126; // PNLLED3#
-+ cambria_gpio_leds[2].gpio = 119; // PNLLED4#
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2359));
-+}
-+
-+static void __init cambria_gw2360_setup(void)
-+{
-+ /* The GW2360 has 8 UARTs in addition to the 1 IXP4xxx UART.
-+ * The chip-selects are expanded via a 3-to-8 decoder and CS2
-+ * and they are 8bit devices
-+ */
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ cambria_optional_uart_data[0].mapbase = 0x52000000;
-+ cambria_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ cambria_optional_uart_data[0].uartclk = 18432000;
-+ cambria_optional_uart_data[0].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[1].mapbase = 0x52000008;
-+ cambria_optional_uart_data[1].membase = (void __iomem *)ioremap(0x52000008, 0x0fff);
-+ cambria_optional_uart_data[1].uartclk = 18432000;
-+ cambria_optional_uart_data[1].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[2].mapbase = 0x52000010;
-+ cambria_optional_uart_data[2].membase = (void __iomem *)ioremap(0x52000010, 0x0fff);
-+ cambria_optional_uart_data[2].uartclk = 18432000;
-+ cambria_optional_uart_data[2].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO4;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO4, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[3].mapbase = 0x52000018;
-+ cambria_optional_uart_data[3].membase = (void __iomem *)ioremap(0x52000018, 0x0fff);
-+ cambria_optional_uart_data[3].uartclk = 18432000;
-+ cambria_optional_uart_data[3].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO5;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO5, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[4].mapbase = 0x52000020;
-+ cambria_optional_uart_data[4].membase = (void __iomem *)ioremap(0x52000020, 0x0fff);
-+ cambria_optional_uart_data[4].uartclk = 18432000;
-+ cambria_optional_uart_data[4].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[4].irq = IRQ_IXP4XX_GPIO8;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[5].mapbase = 0x52000028;
-+ cambria_optional_uart_data[5].membase = (void __iomem *)ioremap(0x52000028, 0x0fff);
-+ cambria_optional_uart_data[5].uartclk = 18432000;
-+ cambria_optional_uart_data[5].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[5].irq = IRQ_IXP4XX_GPIO9;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart_data[6].mapbase = 0x52000030;
-+ cambria_optional_uart_data[6].membase = (void __iomem *)ioremap(0x52000030, 0x0fff);
-+ cambria_optional_uart_data[6].uartclk = 18432000;
-+ cambria_optional_uart_data[6].iotype = UPIO_MEM;
-+ cambria_optional_uart_data[6].irq = IRQ_IXP4XX_GPIO10;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+
-+ cambria_optional_uart.num_resources = 7,
-+ platform_device_register(&cambria_optional_uart);
-+
-+#if defined(CONFIG_MVSWITCH_PHY) || defined(CONFIG_MVSWITCH_PHY_MODULE)
-+ /* The mvswitch driver has some hard-coded values which could
-+ * easily be turned into a platform resource if needed. For now they
-+ * match our hardware configuration:
-+ * MV_BASE 0x10 - phy base address
-+ * MV_WANPORT 0 - Port0 (ENET2) is WAN (SFP module)
-+ * MV_CPUPORT 5 - Port5 is CPU NPEA (eth1)
-+ *
-+ * The mvswitch driver registers a fixup which forces a driver match
-+ * if phy_addr matches MV_BASE
-+ *
-+ * Two static defautl VLAN's are created: WAN port in 1, and all other ports
-+ * in the other.
-+ */
-+ cambria_npea_data.phy = 0x10; // mvswitch driver catches this
-+#else
-+ // Switch Port5 to CPU is MII<->MII (no PHY) - this disables the generic PHY driver
-+ cambria_npea_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+#endif
-+
-+ // disable genphy autonegotiation on NPE-C PHY (eth1) as its 100BaseFX
-+ //cambria_npec_data.noautoneg = 1; // disable autoneg
-+ cambria_npec_data.speed_10 = 0; // 100mbps
-+ cambria_npec_data.half_duplex = 0; // full-duplex
-+ platform_device_register(&cambria_npec_device);
-+ platform_device_register(&cambria_npea_device);
-+
-+ platform_device_register(&cambria_usb0_device);
-+ platform_device_register(&cambria_usb1_device);
-+
-+ cambria_gpio_leds_data.num_leds = 3;
-+ cambria_gpio_leds[0].name = "user1";
-+ cambria_gpio_leds[0].gpio = 125;
-+ cambria_gpio_leds[1].gpio = 126;
-+ cambria_gpio_leds[2].gpio = 119;
-+ platform_device_register(&cambria_gpio_leds_device);
-+
-+#if (IS_ENABLED(CONFIG_KEYBOARD_GPIO_POLLED))
-+ cambria_gpio_buttons[0].gpio = 100;
-+ platform_device_register(&cambria_gpio_buttons_device);
-+#endif
-+
-+#ifdef SFP_SERIALID
-+ /* the SFP modules each have an i2c bus for serial ident via GSC GPIO
-+ * To use these the i2c-gpio driver must be changed to use the _cansleep
-+ * varients of gpio_get_value/gpio_set_value (I don't know why it doesn't
-+ * use that anyway as it doesn't operate in an IRQ context).
-+ * Additionally the i2c-gpio module must set the gpio to output-high prior
-+ * to changing direction to an input to enable internal Pullups
-+ */
-+ platform_device_register(&cambria_i2c_gpio_sfpa);
-+ platform_device_register(&cambria_i2c_gpio_sfpb);
-+#endif
-+
-+ /* gpio config (/sys/class/gpio) */
-+ cambria_register_gpio(ARRAY_AND_SIZE(cambria_gpios_gw2360));
-+}
-+
-+static struct cambria_board_info cambria_boards[] __initdata = {
-+ {
-+ .model = "GW2350",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2351",
-+ .setup = cambria_gw2350_setup,
-+ }, {
-+ .model = "GW2358",
-+ .setup = cambria_gw2358_setup,
-+ }, {
-+ .model = "GW2359",
-+ .setup = cambria_gw2359_setup,
-+ }, {
-+ .model = "GW2360",
-+ .setup = cambria_gw2360_setup,
-+ }, {
-+ .model = "GW2371",
-+ .setup = cambria_gw2358_setup,
-+ }
-+};
-+
-+static struct cambria_board_info * __init cambria_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(cambria_boards); i++) {
-+ struct cambria_board_info *info = &cambria_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&cambria_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&cambria_npea_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ cambria_info = cambria_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data cambria_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+ .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct pca953x_platform_data cambria_pca_data = {
-+ .gpio_base = 100,
-+ .irq_base = -1,
-+};
-+
-+static struct pca953x_platform_data cambria_pca2_data = {
-+ .gpio_base = 116,
-+ .irq_base = -1,
-+};
-+
-+static struct i2c_board_info __initdata cambria_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &cambria_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x27),
-+ .platform_data = &cambria_pca2_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &cambria_eeprom_info
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x56),
-+ .platform_data = &gw_i2c_pld_data0,
-+ },
-+ {
-+ I2C_BOARD_INFO("gw_i2c_pld", 0x57),
-+ .platform_data = &gw_i2c_pld_data1,
-+ },
-+};
-+
-+static void __init cambria_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ cambria_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ cambria_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE; // make sure window is writable
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(ARRAY_AND_SIZE(cambria_devices));
-+
-+ cambria_pata_resources[0].start = 0x53e00000;
-+ cambria_pata_resources[0].end = 0x53e3ffff;
-+
-+ cambria_pata_resources[1].start = 0x53e40000;
-+ cambria_pata_resources[1].end = 0x53e7ffff;
-+
-+ cambria_pata_data.cs0_cfg = IXP4XX_EXP_CS3;
-+ cambria_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ i2c_register_board_info(0, ARRAY_AND_SIZE(cambria_i2c_board_info));
-+}
-+
-+static int __init cambria_model_setup(void)
-+{
-+ if (!machine_is_cambria())
-+ return 0;
-+
-+ if (cambria_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Cambria %s\n",
-+ cambria_info->model);
-+ cambria_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Cambria model number"
-+ " -- defaults will be used\n");
-+ cambria_gw23xx_setup();
-+ }
-+
-+ return 0;
-+}
-+late_initcall(cambria_model_setup);
-+
-+MACHINE_START(CAMBRIA, "Gateworks Cambria series")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = cambria_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch
deleted file mode 100644
index f46b9c61bf..0000000000
--- a/target/linux/ixp4xx/patches-3.10/201-npe_driver_print_license_location.patch
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -586,6 +586,8 @@ int npe_load_firmware(struct npe *npe, c
- npe_reset(npe);
- #endif
-
-+ print_npe(KERN_INFO, npe, "firmware's license can be found in /usr/share/doc/LICENSE.IPL\n");
-+
- print_npe(KERN_INFO, npe, "firmware functionality 0x%X, "
- "revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
- (image->id >> 8) & 0xFF, image->id & 0xFF);
diff --git a/target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch b/target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch
deleted file mode 100644
index a33bacb190..0000000000
--- a/target/linux/ixp4xx/patches-3.10/203-npe_driver_mask_phy_features.patch
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -1459,6 +1459,10 @@ static int eth_init_one(struct platform_
- goto err_free_mem;
- }
-
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
- port->phydev->irq = PHY_POLL;
-
- if ((err = register_netdev(dev)))
diff --git a/target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch b/target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch
deleted file mode 100644
index 6eefc0e490..0000000000
--- a/target/linux/ixp4xx/patches-3.10/205-npe_driver_separate_phy_functions.patch
+++ /dev/null
@@ -1,131 +0,0 @@
-From e3eab80fb5d0a7d7fdb0f2f231b27161d5ec3804 Mon Sep 17 00:00:00 2001
-From: Jonas Gorski <jogo@openwrt.org>
-Date: Sun, 30 Jun 2013 15:52:53 +0200
-Subject: [PATCH 23/36] 205-npe_driver_separate_phy_functions.patch
-
----
- drivers/net/ethernet/xscale/ixp4xx_eth.c | 70 ++++++++++++++++++++++--------
- 1 file changed, 51 insertions(+), 19 deletions(-)
-
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -573,6 +573,51 @@ static void ixp4xx_adjust_link(struct ne
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static int ixp4xx_phy_connect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct eth_plat_info *plat = port->plat;
-+ char phy_id[MII_BUS_ID_SIZE + 3];
-+
-+ snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-+ mdio_bus->id, plat->phy);
-+ port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-+ PHY_INTERFACE_MODE_MII);
-+ if (IS_ERR(port->phydev)) {
-+ printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-+ return PTR_ERR(port->phydev);
-+ }
-+
-+ /* mask with MAC supported features */
-+ port->phydev->supported &= PHY_BASIC_FEATURES;
-+ port->phydev->advertising = port->phydev->supported;
-+
-+ port->phydev->irq = PHY_POLL;
-+
-+ return 0;
-+}
-+
-+static void ixp4xx_phy_disconnect(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_disconnect(port->phydev);
-+}
-+
-+static void ixp4xx_phy_start(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ port->speed = 0; /* force "link up" message */
-+ phy_start(port->phydev);
-+}
-+
-+static void ixp4xx_phy_stop(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+
-+ phy_stop(port->phydev);
-+}
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
- u8 *data, int len)
-@@ -1239,8 +1284,7 @@ static int eth_open(struct net_device *d
- return err;
- }
-
-- port->speed = 0; /* force "link up" message */
-- phy_start(port->phydev);
-+ ixp4xx_phy_start(dev);
-
- for (i = 0; i < ETH_ALEN; i++)
- __raw_writel(dev->dev_addr[i], &port->regs->hw_addr[i]);
-@@ -1361,7 +1405,7 @@ static int eth_close(struct net_device *
- printk(KERN_CRIT "%s: unable to disable loopback\n",
- dev->name);
-
-- phy_stop(port->phydev);
-+ ixp4xx_phy_stop(dev);
-
- if (!ports_open)
- qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1387,7 +1431,6 @@ static int eth_init_one(struct platform_
- struct net_device *dev;
- struct eth_plat_info *plat = pdev->dev.platform_data;
- u32 regs_phys;
-- char phy_id[MII_BUS_ID_SIZE + 3];
- int err;
-
- if (ptp_filter_init(ptp_filter, ARRAY_SIZE(ptp_filter))) {
-@@ -1450,20 +1493,9 @@ static int eth_init_one(struct platform_
- __raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
- udelay(50);
-
-- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
-- mdio_bus->id, plat->phy);
-- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-- PHY_INTERFACE_MODE_MII);
-- if (IS_ERR(port->phydev)) {
-- err = PTR_ERR(port->phydev);
-+ err = ixp4xx_phy_connect(dev);
-+ if (err)
- goto err_free_mem;
-- }
--
-- /* mask with MAC supported features */
-- port->phydev->supported &= PHY_BASIC_FEATURES;
-- port->phydev->advertising = port->phydev->supported;
--
-- port->phydev->irq = PHY_POLL;
-
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-@@ -1474,7 +1506,7 @@ static int eth_init_one(struct platform_
- return 0;
-
- err_phy_dis:
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(dev);
- err_free_mem:
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
-@@ -1492,7 +1524,7 @@ static int eth_remove_one(struct platfor
- struct port *port = netdev_priv(dev);
-
- unregister_netdev(dev);
-- phy_disconnect(port->phydev);
-+ ixp4xx_phy_disconnect(dev);
- npe_port_tab[NPE_ID(port->id)] = NULL;
- platform_set_drvdata(pdev, NULL);
- npe_release(port->npe);
diff --git a/target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch b/target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch
deleted file mode 100644
index 5003ba744c..0000000000
--- a/target/linux/ixp4xx/patches-3.10/206-npe_driver_add_update_link_function.patch
+++ /dev/null
@@ -1,98 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -177,7 +177,7 @@ struct port {
- struct desc *desc_tab; /* coherent */
- u32 desc_tab_phys;
- int id; /* logical port ID */
-- int speed, duplex;
-+ int link, speed, duplex;
- u8 firmware[4];
- int hwts_tx_en;
- int hwts_rx_en;
-@@ -542,37 +542,52 @@ static void ixp4xx_mdio_remove(void)
- mdiobus_free(mdio_bus);
- }
-
--
--static void ixp4xx_adjust_link(struct net_device *dev)
-+static void ixp4xx_update_link(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-- struct phy_device *phydev = port->phydev;
-
-- if (!phydev->link) {
-- if (port->speed) {
-- port->speed = 0;
-- printk(KERN_INFO "%s: link down\n", dev->name);
-- }
-+ if (!port->link) {
-+ netif_carrier_off(dev);
-+ printk(KERN_INFO "%s: link down\n", dev->name);
- return;
- }
-
-- if (port->speed == phydev->speed && port->duplex == phydev->duplex)
-- return;
--
-- port->speed = phydev->speed;
-- port->duplex = phydev->duplex;
--
-- if (port->duplex)
-+ if (port->duplex == DUPLEX_FULL)
- __raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
- else
- __raw_writel(DEFAULT_TX_CNTRL0 | TX_CNTRL0_HALFDUPLEX,
- &port->regs->tx_control[0]);
-
-+ netif_carrier_on(dev);
- printk(KERN_INFO "%s: link up, speed %u Mb/s, %s duplex\n",
- dev->name, port->speed, port->duplex ? "full" : "half");
- }
-
-+static void ixp4xx_adjust_link(struct net_device *dev)
-+{
-+ struct port *port = netdev_priv(dev);
-+ struct phy_device *phydev = port->phydev;
-+ int status_change = 0;
-+
-+ if (phydev->link) {
-+ if (port->duplex != phydev->duplex
-+ || port->speed != phydev->speed) {
-+ status_change = 1;
-+ }
-+ }
-+
-+ if (phydev->link != port->link)
-+ status_change = 1;
-+
-+ port->link = phydev->link;
-+ port->speed = phydev->speed;
-+ port->duplex = phydev->duplex;
-+
-+ if (status_change)
-+ ixp4xx_update_link(dev);
-+}
-+
- static int ixp4xx_phy_connect(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -608,7 +623,6 @@ static void ixp4xx_phy_start(struct net_
- {
- struct port *port = netdev_priv(dev);
-
-- port->speed = 0; /* force "link up" message */
- phy_start(port->phydev);
- }
-
-@@ -1500,6 +1514,10 @@ static int eth_init_one(struct platform_
- if ((err = register_netdev(dev)))
- goto err_phy_dis;
-
-+ port->link = 0;
-+ port->speed = 0;
-+ port->duplex = -1;
-+
- printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
- npe_name(port->npe));
-
diff --git a/target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch b/target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch
deleted file mode 100644
index 95461dc903..0000000000
--- a/target/linux/ixp4xx/patches-3.10/207-npe_driver_multiphy_support.patch
+++ /dev/null
@@ -1,154 +0,0 @@
-TODO: take care of additional PHYs through the PHY abstraction layer
-
---- a/arch/arm/mach-ixp4xx/include/mach/platform.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/platform.h
-@@ -72,7 +72,7 @@ extern unsigned long ixp4xx_exp_bus_size
- /*
- * Clock Speed Definitions.
- */
--#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
-+#define IXP4XX_PERIPHERAL_BUS_CLOCK (66) /* 66Mhzi APB BUS */
- #define IXP4XX_UART_XTAL 14745600
-
- /*
-@@ -93,12 +93,23 @@ struct ixp4xx_pata_data {
- #define IXP4XX_ETH_NPEB 0x10
- #define IXP4XX_ETH_NPEC 0x20
-
-+#define IXP4XX_ETH_PHY_MAX_ADDR 32
-+
- /* Information about built-in Ethernet MAC interfaces */
- struct eth_plat_info {
- u8 phy; /* MII PHY ID, 0 - 31 */
- u8 rxq; /* configurable, currently 0 - 31 only */
- u8 txreadyq;
- u8 hwaddr[6];
-+
-+ u32 phy_mask;
-+#if 0
-+ int speed;
-+ int duplex;
-+#else
-+ int speed_10;
-+ int half_duplex;
-+#endif
- };
-
- /* Information about built-in HSS (synchronous serial) interfaces */
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -594,6 +594,37 @@ static int ixp4xx_phy_connect(struct net
- struct eth_plat_info *plat = port->plat;
- char phy_id[MII_BUS_ID_SIZE + 3];
-
-+ if (plat->phy == IXP4XX_ETH_PHY_MAX_ADDR) {
-+#if 0
-+ switch (plat->speed) {
-+ case SPEED_10:
-+ case SPEED_100:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid speed (%d)\n",
-+ dev->name, plat->speed);
-+ return -EINVAL;
-+ }
-+
-+ switch (plat->duplex) {
-+ case DUPLEX_HALF:
-+ case DUPLEX_FULL:
-+ break;
-+ default:
-+ printk(KERN_ERR "%s: invalid duplex mode (%d)\n",
-+ dev->name, plat->duplex);
-+ return -EINVAL;
-+ }
-+ port->speed = plat->speed;
-+ port->duplex = plat->duplex;
-+#else
-+ port->speed = plat->speed_10 ? SPEED_10 : SPEED_100;
-+ port->duplex = plat->half_duplex ? DUPLEX_HALF : DUPLEX_FULL;
-+#endif
-+
-+ return 0;
-+ }
-+
- snprintf(phy_id, MII_BUS_ID_SIZE + 3, PHY_ID_FMT,
- mdio_bus->id, plat->phy);
- port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link,
-@@ -616,21 +647,32 @@ static void ixp4xx_phy_disconnect(struct
- {
- struct port *port = netdev_priv(dev);
-
-- phy_disconnect(port->phydev);
-+ if (port->phydev)
-+ phy_disconnect(port->phydev);
- }
-
- static void ixp4xx_phy_start(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_start(port->phydev);
-+ if (port->phydev) {
-+ phy_start(port->phydev);
-+ } else {
-+ port->link = 1;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static void ixp4xx_phy_stop(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-
-- phy_stop(port->phydev);
-+ if (port->phydev) {
-+ phy_stop(port->phydev);
-+ } else {
-+ port->link = 0;
-+ ixp4xx_update_link(dev);
-+ }
- }
-
- static inline void debug_pkt(struct net_device *dev, const char *func,
-@@ -1028,6 +1070,9 @@ static int eth_ioctl(struct net_device *
- if (cpu_is_ixp46x() && cmd == SIOCSHWTSTAMP)
- return hwtstamp_ioctl(dev, req, cmd);
-
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_mii_ioctl(port->phydev, req, cmd);
- }
-
-@@ -1048,18 +1093,30 @@ static void ixp4xx_get_drvinfo(struct ne
- static int ixp4xx_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_gset(port->phydev, cmd);
- }
-
- static int ixp4xx_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_ethtool_sset(port->phydev, cmd);
- }
-
- static int ixp4xx_nway_reset(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-+
-+ if (!port->phydev)
-+ return -EOPNOTSUPP;
-+
- return phy_start_aneg(port->phydev);
- }
-
diff --git a/target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch
deleted file mode 100644
index d151d5e6f7..0000000000
--- a/target/linux/ixp4xx/patches-3.10/295-latch_led_driver.patch
+++ /dev/null
@@ -1,201 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -239,6 +239,12 @@ config LEDS_LP8788
- help
- This option enables support for the Keyboard LEDs on the LP8788 PMIC.
-
-+config LEDS_LATCH
-+ tristate "LED Support for Memory Latched LEDs"
-+ depends on LEDS_CLASS
-+ help
-+ -- To Do --
-+
- config LEDS_CLEVO_MAIL
- tristate "Mail LED on Clevo notebook"
- depends on LEDS_CLASS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_SUNFIRE) += leds-sunf
- obj-$(CONFIG_LEDS_PCA9532) += leds-pca9532.o
- obj-$(CONFIG_LEDS_GPIO_REGISTER) += leds-gpio-register.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
-+obj-$(CONFIG_LEDS_LATCH) += leds-latch.o
- obj-$(CONFIG_LEDS_LP3944) += leds-lp3944.o
- obj-$(CONFIG_LEDS_LP55XX_COMMON) += leds-lp55xx-common.o
- obj-$(CONFIG_LEDS_LP5521) += leds-lp5521.o
---- /dev/null
-+++ b/drivers/leds/leds-latch.c
-@@ -0,0 +1,152 @@
-+/*
-+ * LEDs driver for Memory Latched Devices
-+ *
-+ * Copyright (C) 2008 Gateworks Corp.
-+ * Chris Lang <clang@gateworks.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+#include <linux/kernel.h>
-+#include <linux/slab.h>
-+#include <linux/init.h>
-+#include <linux/platform_device.h>
-+#include <linux/leds.h>
-+#include <linux/workqueue.h>
-+#include <asm/io.h>
-+#include <linux/spinlock.h>
-+#include <linux/slab.h>
-+#include <linux/module.h>
-+#include <linux/export.h>
-+
-+static unsigned int mem_keep = 0xFF;
-+static spinlock_t mem_lock;
-+static unsigned char *iobase;
-+
-+struct latch_led_data {
-+ struct led_classdev cdev;
-+ struct work_struct work;
-+ u8 new_level;
-+ u8 bit;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
-+static void latch_set_led(u8 bit, enum led_brightness value)
-+{
-+ if (value == LED_OFF)
-+ mem_keep |= (0x1 << bit);
-+ else
-+ mem_keep &= ~(0x1 << bit);
-+
-+ writeb(mem_keep, iobase);
-+}
-+
-+static void latch_led_set(struct led_classdev *led_cdev,
-+ enum led_brightness value)
-+{
-+ struct latch_led_data *led_dat =
-+ container_of(led_cdev, struct latch_led_data, cdev);
-+
-+ raw_spin_lock(mem_lock);
-+
-+ led_dat->set_led(led_dat->bit, value);
-+
-+ raw_spin_unlock(mem_lock);
-+}
-+
-+static int latch_led_probe(struct platform_device *pdev)
-+{
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led *cur_led;
-+ struct latch_led_data *leds_data, *led_dat;
-+ int i, ret = 0;
-+
-+ if (!pdata)
-+ return -EBUSY;
-+
-+ leds_data = kzalloc(sizeof(struct latch_led_data) * pdata->num_leds,
-+ GFP_KERNEL);
-+ if (!leds_data)
-+ return -ENOMEM;
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ cur_led = &pdata->leds[i];
-+ led_dat = &leds_data[i];
-+
-+ led_dat->cdev.name = cur_led->name;
-+ led_dat->cdev.default_trigger = cur_led->default_trigger;
-+ led_dat->cdev.brightness_set = latch_led_set;
-+ led_dat->cdev.brightness = LED_OFF;
-+ led_dat->bit = cur_led->bit;
-+ led_dat->set_led = pdata->set_led ? pdata->set_led : latch_set_led;
-+
-+ ret = led_classdev_register(&pdev->dev, &led_dat->cdev);
-+ if (ret < 0) {
-+ goto err;
-+ }
-+ }
-+
-+ if (!pdata->set_led) {
-+ iobase = ioremap_nocache(pdata->mem, 0x1000);
-+ writeb(0xFF, iobase);
-+ }
-+ platform_set_drvdata(pdev, leds_data);
-+
-+ return 0;
-+
-+err:
-+ if (i > 0) {
-+ for (i = i - 1; i >= 0; i--) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ }
-+ }
-+
-+ kfree(leds_data);
-+
-+ return ret;
-+}
-+
-+static int latch_led_remove(struct platform_device *pdev)
-+{
-+ int i;
-+ struct latch_led_platform_data *pdata = pdev->dev.platform_data;
-+ struct latch_led_data *leds_data;
-+
-+ leds_data = platform_get_drvdata(pdev);
-+
-+ for (i = 0; i < pdata->num_leds; i++) {
-+ led_classdev_unregister(&leds_data[i].cdev);
-+ cancel_work_sync(&leds_data[i].work);
-+ }
-+
-+ kfree(leds_data);
-+
-+ return 0;
-+}
-+
-+static struct platform_driver latch_led_driver = {
-+ .probe = latch_led_probe,
-+ .remove = latch_led_remove,
-+ .driver = {
-+ .name = "leds-latch",
-+ .owner = THIS_MODULE,
-+ },
-+};
-+
-+static int __init latch_led_init(void)
-+{
-+ return platform_driver_register(&latch_led_driver);
-+}
-+
-+static void __exit latch_led_exit(void)
-+{
-+ platform_driver_unregister(&latch_led_driver);
-+}
-+
-+module_init(latch_led_init);
-+module_exit(latch_led_exit);
-+
-+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
-+MODULE_DESCRIPTION("Latch LED driver");
---- a/include/linux/leds.h
-+++ b/include/linux/leds.h
-@@ -285,4 +285,18 @@ static inline void ledtrig_cpu(enum cpu_
- }
- #endif
-
-+/* For the leds-latch driver */
-+struct latch_led {
-+ const char *name;
-+ char *default_trigger;
-+ unsigned bit;
-+};
-+
-+struct latch_led_platform_data {
-+ int num_leds;
-+ u32 mem;
-+ struct latch_led *leds;
-+ void (*set_led)(u8 bit, enum led_brightness value);
-+};
-+
- #endif /* __LINUX_LEDS_H_INCLUDED */
diff --git a/target/linux/ixp4xx/patches-3.10/300-avila_support.patch b/target/linux/ixp4xx/patches-3.10/300-avila_support.patch
deleted file mode 100644
index e214d96b92..0000000000
--- a/target/linux/ixp4xx/patches-3.10/300-avila_support.patch
+++ /dev/null
@@ -1,726 +0,0 @@
---- a/arch/arm/mach-ixp4xx/avila-pci.c
-+++ b/arch/arm/mach-ixp4xx/avila-pci.c
-@@ -27,8 +27,8 @@
- #include <mach/hardware.h>
- #include <asm/mach-types.h>
-
--#define AVILA_MAX_DEV 4
--#define LOFT_MAX_DEV 6
-+#define AVILA_MAX_DEV 6
-+
- #define IRQ_LINES 4
-
- /* PCI controller GPIO to IRQ pin mappings */
-@@ -55,10 +55,8 @@ static int __init avila_map_irq(const st
- IXP4XX_GPIO_IRQ(INTD)
- };
-
-- if (slot >= 1 &&
-- slot <= (machine_is_loft() ? LOFT_MAX_DEV : AVILA_MAX_DEV) &&
-- pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ if (slot >= 1 && slot <= AVILA_MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }
---- a/arch/arm/mach-ixp4xx/avila-setup.c
-+++ b/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -14,9 +14,16 @@
- #include <linux/kernel.h>
- #include <linux/init.h>
- #include <linux/device.h>
-+#include <linux/if_ether.h>
-+#include <linux/socket.h>
-+#include <linux/netdevice.h>
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/i2c.h>
-+#include <linux/i2c/at24.h>
-+#include <linux/leds.h>
-+#include <linux/i2c/pca953x.h>
- #include <linux/i2c-gpio.h>
- #include <asm/types.h>
- #include <asm/setup.h>
-@@ -26,10 +33,25 @@
- #include <asm/irq.h>
- #include <asm/mach/arch.h>
- #include <asm/mach/flash.h>
-+#include <linux/irq.h>
-
- #define AVILA_SDA_PIN 7
- #define AVILA_SCL_PIN 6
-
-+/* User LEDs */
-+#define AVILA_GW23XX_LED_USER_GPIO 3
-+#define AVILA_GW23X7_LED_USER_GPIO 4
-+
-+/* gpio mask used by platform device */
-+#define AVILA_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7) | (1 << 9)
-+
-+struct avila_board_info {
-+ unsigned char *model;
-+ void (*setup)(void);
-+};
-+
-+static struct avila_board_info *avila_info __initdata;
-+
- static struct flash_platform_data avila_flash_data = {
- .map_name = "cfi_probe",
- .width = 2,
-@@ -105,14 +127,69 @@ static struct platform_device avila_uart
- .resource = avila_uart_resources
- };
-
--static struct resource avila_pata_resources[] = {
-+static struct resource avila_optional_uart_resources[] = {
- {
-- .flags = IORESOURCE_MEM
-- },
-+ .start = 0x54000000,
-+ .end = 0x54000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x55000000,
-+ .end = 0x55000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x56000000,
-+ .end = 0x56000fff,
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .start = 0x57000000,
-+ .end = 0x57000fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port avila_optional_uart_data[] = {
- {
-- .flags = IORESOURCE_MEM,
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
-+ },{
-+ .flags = UPF_BOOT_AUTOCONF,
-+ .iotype = UPIO_MEM,
-+ .regshift = 0,
-+ .uartclk = 18432000,
-+ .rw_delay = 2,
- },
-+ { }
-+};
-+
-+static struct platform_device avila_optional_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM1,
-+ .dev.platform_data = avila_optional_uart_data,
-+ .num_resources = 4,
-+ .resource = avila_optional_uart_resources,
-+};
-+
-+static struct resource avila_pata_resources[] = {
- {
-+ .flags = IORESOURCE_MEM
-+ },{
-+ .flags = IORESOURCE_MEM,
-+ },{
- .name = "intrq",
- .start = IRQ_IXP4XX_GPIO12,
- .end = IRQ_IXP4XX_GPIO12,
-@@ -133,21 +210,237 @@ static struct platform_device avila_pata
- .resource = avila_pata_resources,
- };
-
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info avila_npeb_data = {
-+ .phy = 0,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info avila_npec_data = {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device avila_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &avila_npeb_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device avila_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &avila_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct gpio_led avila_gpio_leds[] = {
-+ {
-+ .name = "user", /* green led */
-+ .gpio = AVILA_GW23XX_LED_USER_GPIO,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio1", /* green led */
-+ .gpio = 104,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio2", /* green led */
-+ .gpio = 105,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio3", /* green led */
-+ .gpio = 106,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "radio4", /* green led */
-+ .gpio = 107,
-+ .active_low = 1,
-+ },
-+
-+};
-+
-+static struct gpio_led_platform_data avila_gpio_leds_data = {
-+ .num_leds = 1,
-+ .leds = avila_gpio_leds,
-+};
-+
-+static struct platform_device avila_gpio_leds_device = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &avila_gpio_leds_data,
-+};
-+
-+static struct latch_led avila_latch_leds[] = {
-+ {
-+ .name = "led0", /* green led */
-+ .bit = 0,
-+ },
-+ {
-+ .name = "led1", /* green led */
-+ .bit = 1,
-+ },
-+ {
-+ .name = "led2", /* green led */
-+ .bit = 2,
-+ },
-+ {
-+ .name = "led3", /* green led */
-+ .bit = 3,
-+ },
-+ {
-+ .name = "led4", /* green led */
-+ .bit = 4,
-+ },
-+ {
-+ .name = "led5", /* green led */
-+ .bit = 5,
-+ },
-+ {
-+ .name = "led6", /* green led */
-+ .bit = 6,
-+ },
-+ {
-+ .name = "led7", /* green led */
-+ .bit = 7,
-+ }
-+};
-+
-+static struct latch_led_platform_data avila_latch_leds_data = {
-+ .num_leds = 8,
-+ .leds = avila_latch_leds,
-+ .mem = 0x51000000,
-+};
-+
-+static struct platform_device avila_latch_leds_device = {
-+ .name = "leds-latch",
-+ .id = -1,
-+ .dev.platform_data = &avila_latch_leds_data,
-+};
-+
- static struct platform_device *avila_devices[] __initdata = {
- &avila_i2c_gpio,
-- &avila_flash,
- &avila_uart
- };
-
--static void __init avila_init(void)
-+/*
-+ * Audio Devices
-+ */
-+
-+static struct platform_device avila_hss_device[] = {
-+ {
-+ .name = "gw_avila_hss",
-+ .id = 0,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 1,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 2,
-+ },{
-+ .name = "gw_avila_hss",
-+ .id = 3,
-+ },
-+};
-+
-+static struct platform_device avila_pcm_device[] = {
-+ {
-+ .name = "gw_avila-audio",
-+ .id = 0,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 1,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 2,
-+ },{
-+ .name = "gw_avila-audio",
-+ .id = 3,
-+ }
-+};
-+
-+static void setup_audio_devices(void) {
-+ platform_device_register(&avila_hss_device[0]);
-+ platform_device_register(&avila_hss_device[1]);
-+ platform_device_register(&avila_hss_device[2]);
-+ platform_device_register(&avila_hss_device[3]);
-+
-+ platform_device_register(&avila_pcm_device[0]);
-+ platform_device_register(&avila_pcm_device[1]);
-+ platform_device_register(&avila_pcm_device[2]);
-+ platform_device_register(&avila_pcm_device[3]);
-+}
-+
-+static void __init avila_gw23xx_setup(void)
- {
-- ixp4xx_sys_init();
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-
-- avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-- avila_flash_resource.end =
-- IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-
-- platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+static void __init avila_gw2342_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2345_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2347_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2348_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_npec_device);
-+
-+ platform_device_register(&avila_gpio_leds_device);
-
- avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
- avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-@@ -159,8 +452,335 @@ static void __init avila_init(void)
- avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-
- platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2353_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+ platform_device_register(&avila_gpio_leds_device);
-+}
-+
-+static void __init avila_gw2355_setup(void)
-+{
-+ avila_npeb_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npeb_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 16;
-+ platform_device_register(&avila_npec_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS4 |= 0xbfff3c03;
-+ avila_latch_leds[0].name = "RXD";
-+ avila_latch_leds[1].name = "TXD";
-+ avila_latch_leds[2].name = "POL";
-+ avila_latch_leds[3].name = "LNK";
-+ avila_latch_leds[4].name = "ERR";
-+ avila_latch_leds_data.num_leds = 5;
-+ avila_latch_leds_data.mem = 0x54000000;
-+ platform_device_register(&avila_latch_leds_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(1);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(1);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS1;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS2;
-+
-+ platform_device_register(&avila_pata);
-+}
-+
-+static void __init avila_gw2357_setup(void)
-+{
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ *IXP4XX_EXP_CS1 |= 0xbfff3c03;
-+ platform_device_register(&avila_latch_leds_device);
-+}
-+
-+static void __init avila_gw2365_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS4 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO0, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x54000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x54000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO0;
-+
-+ *IXP4XX_EXP_CS5 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO1, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[1].mapbase = 0x55000000;
-+ avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x55000000, 0x0fff);
-+ avila_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO1;
-+
-+ *IXP4XX_EXP_CS6 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[2].mapbase = 0x56000000;
-+ avila_optional_uart_data[2].membase = (void __iomem *)ioremap(0x56000000, 0x0fff);
-+ avila_optional_uart_data[2].irq = IRQ_IXP4XX_GPIO2;
-+
-+ *IXP4XX_EXP_CS7 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[3].mapbase = 0x57000000;
-+ avila_optional_uart_data[3].membase = (void __iomem *)ioremap(0x57000000, 0x0fff);
-+ avila_optional_uart_data[3].irq = IRQ_IXP4XX_GPIO3;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ avila_pata_resources[0].start = IXP4XX_EXP_BUS_BASE(2);
-+ avila_pata_resources[0].end = IXP4XX_EXP_BUS_END(2);
-+
-+ avila_pata_resources[1].start = IXP4XX_EXP_BUS_BASE(3);
-+ avila_pata_resources[1].end = IXP4XX_EXP_BUS_END(3);
-+
-+ avila_pata_data.cs0_cfg = IXP4XX_EXP_CS2;
-+ avila_pata_data.cs1_cfg = IXP4XX_EXP_CS3;
-+
-+ platform_device_register(&avila_pata);
-+
-+ avila_gpio_leds[0].gpio = 109;
-+ avila_gpio_leds_data.num_leds = 5;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2369_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2370_setup(void)
-+{
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ avila_npeb_data.phy = 5;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = IXP4XX_ETH_PHY_MAX_ADDR;
-+ avila_npec_data.phy_mask = 0x1e; /* ports 1-4 of the KS8995 switch */
-+ platform_device_register(&avila_npec_device);
-+
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO2, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x52000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO2;
-+
-+ *IXP4XX_EXP_CS3 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO3, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[1].mapbase = 0x53000000;
-+ avila_optional_uart_data[1].membase = (void __iomem *)ioremap(0x53000000, 0x0fff);
-+ avila_optional_uart_data[1].irq = IRQ_IXP4XX_GPIO3;
-+
-+ avila_optional_uart.num_resources = 2;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ avila_gpio_leds[0].gpio = 101;
-+ platform_device_register(&avila_gpio_leds_device);
-+
-+ setup_audio_devices();
-+}
-+
-+static void __init avila_gw2375_setup(void)
-+{
-+ avila_npeb_data.phy = 1;
-+ platform_device_register(&avila_npeb_device);
-+
-+ avila_npec_data.phy = 2;
-+ platform_device_register(&avila_npec_device);
-+
-+ *IXP4XX_EXP_CS2 = 0xBFFF3C43;
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_EDGE_RISING);
-+ avila_optional_uart_data[0].mapbase = 0x52000000;
-+ avila_optional_uart_data[0].membase = (void __iomem *)ioremap(0x52000000, 0x0fff);
-+ avila_optional_uart_data[0].irq = IRQ_IXP4XX_GPIO10;
-+
-+ avila_optional_uart.num_resources = 1;
-+
-+ platform_device_register(&avila_optional_uart);
-+
-+ setup_audio_devices();
-+}
-+
-+
-+static struct avila_board_info avila_boards[] __initdata = {
-+ {
-+ .model = "GW2342",
-+ .setup = avila_gw2342_setup,
-+ }, {
-+ .model = "GW2345",
-+ .setup = avila_gw2345_setup,
-+ }, {
-+ .model = "GW2347",
-+ .setup = avila_gw2347_setup,
-+ }, {
-+ .model = "GW2348",
-+ .setup = avila_gw2348_setup,
-+ }, {
-+ .model = "GW2353",
-+ .setup = avila_gw2353_setup,
-+ }, {
-+ .model = "GW2355",
-+ .setup = avila_gw2355_setup,
-+ }, {
-+ .model = "GW2357",
-+ .setup = avila_gw2357_setup,
-+ }, {
-+ .model = "GW2365",
-+ .setup = avila_gw2365_setup,
-+ }, {
-+ .model = "GW2369",
-+ .setup = avila_gw2369_setup,
-+ }, {
-+ .model = "GW2370",
-+ .setup = avila_gw2370_setup,
-+ }, {
-+ .model = "GW2373",
-+ .setup = avila_gw2369_setup,
-+ }, {
-+ .model = "GW2375",
-+ .setup = avila_gw2375_setup,
-+ }
-+};
-+
-+static struct avila_board_info * __init avila_find_board_info(char *model)
-+{
-+ int i;
-+ model[6] = '\0';
-+
-+ for (i = 0; i < ARRAY_SIZE(avila_boards); i++) {
-+ struct avila_board_info *info = &avila_boards[i];
-+ if (strcmp(info->model, model) == 0)
-+ return info;
-+ }
-+
-+ return NULL;
-+}
-+
-+static struct memory_accessor *at24_mem_acc;
-+
-+static void at24_setup(struct memory_accessor *mem_acc, void *context)
-+{
-+ char mac_addr[ETH_ALEN];
-+ char model[7];
-+
-+ at24_mem_acc = mem_acc;
-+
-+ /* Read MAC addresses */
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x0, 6) == 6) {
-+ memcpy(&avila_npeb_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x6, 6) == 6) {
-+ memcpy(&avila_npec_data.hwaddr, mac_addr, ETH_ALEN);
-+ }
-+
-+ /* Read the first 6 bytes of the model number */
-+ if (at24_mem_acc->read(at24_mem_acc, model, 0x20, 6) == 6) {
-+ avila_info = avila_find_board_info(model);
-+ }
-+
-+}
-+
-+static struct at24_platform_data avila_eeprom_info = {
-+ .byte_len = 1024,
-+ .page_size = 16,
-+// .flags = AT24_FLAG_READONLY,
-+ .setup = at24_setup,
-+};
-+
-+static struct pca953x_platform_data avila_pca_data = {
-+ .gpio_base = 100,
-+};
-+
-+static struct i2c_board_info __initdata avila_i2c_board_info[] = {
-+ {
-+ I2C_BOARD_INFO("ds1672", 0x68),
-+ },
-+ {
-+ I2C_BOARD_INFO("gsp", 0x29),
-+ },
-+ {
-+ I2C_BOARD_INFO("pca9555", 0x23),
-+ .platform_data = &avila_pca_data,
-+ },
-+ {
-+ I2C_BOARD_INFO("ad7418", 0x28),
-+ },
-+ {
-+ I2C_BOARD_INFO("24c08", 0x51),
-+ .platform_data = &avila_eeprom_info
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x1b),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x1a),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x19),
-+ },
-+ {
-+ I2C_BOARD_INFO("tlv320aic33", 0x18),
-+ },
-+};
-+
-+static void __init avila_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ platform_add_devices(avila_devices, ARRAY_SIZE(avila_devices));
-+
-+ i2c_register_board_info(0, avila_i2c_board_info,
-+ ARRAY_SIZE(avila_i2c_board_info));
-+}
-+
-+static int __init avila_model_setup(void)
-+{
-+ if (!machine_is_avila())
-+ return 0;
-+
-+ /* default 16MB flash */
-+ avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ avila_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ if (avila_info) {
-+ printk(KERN_DEBUG "Running on Gateworks Avila %s\n",
-+ avila_info->model);
-+ avila_info->setup();
-+ } else {
-+ printk(KERN_INFO "Unknown/missing Avila model number"
-+ " -- defaults will be used\n");
-+ avila_gw23xx_setup();
-+ }
-+ platform_device_register(&avila_flash);
-
-+ return 0;
- }
-+late_initcall(avila_model_setup);
-
- MACHINE_START(AVILA, "Gateworks Avila Network Platform")
- /* Maintainer: Deepak Saxena <dsaxena@plexity.net> */
diff --git a/target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch b/target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch
deleted file mode 100644
index 40775513b7..0000000000
--- a/target/linux/ixp4xx/patches-3.10/304-ixp4xx_eth_jumboframe.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/drivers/net/ethernet/xscale/ixp4xx_eth.c
-+++ b/drivers/net/ethernet/xscale/ixp4xx_eth.c
-@@ -57,7 +57,7 @@
-
- #define POOL_ALLOC_SIZE (sizeof(struct desc) * (RX_DESCS + TX_DESCS))
- #define REGS_SIZE 0x1000
--#define MAX_MRU 1536 /* 0x600 */
-+#define MAX_MRU (14320 - ETH_HLEN - ETH_FCS_LEN)
- #define RX_BUFF_SIZE ALIGN((NET_IP_ALIGN) + MAX_MRU, 4)
-
- #define NAPI_WEIGHT 16
-@@ -1295,6 +1295,32 @@ static void destroy_queues(struct port *
- }
- }
-
-+static int eth_do_change_mtu(struct net_device *dev, int mtu)
-+{
-+ struct port *port;
-+ struct msg msg;
-+ /* adjust for ethernet headers */
-+ int framesize = mtu + ETH_HLEN + ETH_FCS_LEN;
-+
-+ port = netdev_priv(dev);
-+
-+ memset(&msg, 0, sizeof(msg));
-+ msg.cmd = NPE_SETMAXFRAMELENGTHS;
-+ msg.eth_id = port->id;
-+
-+ /* max rx/tx 64 byte blocks */
-+ msg.byte2 = ((framesize + 63) / 64) << 8;
-+ msg.byte3 = ((framesize + 63) / 64) << 8;
-+
-+ msg.byte4 = msg.byte6 = framesize >> 8;
-+ msg.byte5 = msg.byte7 = framesize & 0xff;
-+
-+ if (npe_send_recv_message(port->npe, &msg, "ETH_SET_MAX_FRAME_LENGTH"))
-+ return -EIO;
-+
-+ return 0;
-+}
-+
- static int eth_open(struct net_device *dev)
- {
- struct port *port = netdev_priv(dev);
-@@ -1346,6 +1372,8 @@ static int eth_open(struct net_device *d
- if (npe_send_recv_message(port->npe, &msg, "ETH_SET_FIREWALL_MODE"))
- return -EIO;
-
-+ eth_do_change_mtu(dev, dev->mtu);
-+
- if ((err = request_queues(port)) != 0)
- return err;
-
-@@ -1485,7 +1513,26 @@ static int eth_close(struct net_device *
- return 0;
- }
-
-+static int ixp_eth_change_mtu(struct net_device *dev, int mtu)
-+{
-+ int ret;
-+
-+ if (mtu > MAX_MRU)
-+ return -EINVAL;
-+
-+ if (dev->flags & IFF_UP) {
-+ ret = eth_do_change_mtu(dev, mtu);
-+ if (ret < 0)
-+ return ret;
-+ }
-+
-+ dev->mtu = mtu;
-+
-+ return 0;
-+}
-+
- static const struct net_device_ops ixp4xx_netdev_ops = {
-+ .ndo_change_mtu = ixp_eth_change_mtu,
- .ndo_open = eth_open,
- .ndo_stop = eth_close,
- .ndo_start_xmit = eth_xmit,
diff --git a/target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch
deleted file mode 100644
index 080b96ac86..0000000000
--- a/target/linux/ixp4xx/patches-3.10/310-gtwx5717_spi_bus.patch
+++ /dev/null
@@ -1,52 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -27,6 +27,7 @@
- #include <linux/serial.h>
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
-+#include <linux/spi/spi_gpio_old.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -146,9 +147,41 @@ static struct platform_device gtwx5715_f
- .resource = &gtwx5715_flash_resource,
- };
-
-+static int gtwx5715_spi_boardinfo_setup(struct spi_board_info *bi,
-+ struct spi_master *master, void *data)
-+{
-+
-+ strlcpy(bi->modalias, "spi-ks8995", sizeof(bi->modalias));
-+
-+ bi->max_speed_hz = 5000000 /* Hz */;
-+ bi->bus_num = master->bus_num;
-+ bi->mode = SPI_MODE_0;
-+
-+ return 0;
-+}
-+
-+static struct spi_gpio_platform_data gtwx5715_spi_bus_data = {
-+ .pin_cs = GTWX5715_KSSPI_SELECT,
-+ .pin_clk = GTWX5715_KSSPI_CLOCK,
-+ .pin_miso = GTWX5715_KSSPI_RXD,
-+ .pin_mosi = GTWX5715_KSSPI_TXD,
-+ .cs_activelow = 1,
-+ .no_spi_delay = 1,
-+ .boardinfo_setup = gtwx5715_spi_boardinfo_setup,
-+};
-+
-+static struct platform_device gtwx5715_spi_bus = {
-+ .name = "spi-gpio",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &gtwx5715_spi_bus_data,
-+ },
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
-+ &gtwx5715_spi_bus,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch
deleted file mode 100644
index aa7a9e05a0..0000000000
--- a/target/linux/ixp4xx/patches-3.10/311-gtwx5717_mac_plat_info.patch
+++ /dev/null
@@ -1,50 +0,0 @@
---- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -28,6 +28,7 @@
- #include <linux/tty.h>
- #include <linux/serial_8250.h>
- #include <linux/spi/spi_gpio_old.h>
-+#include <linux/dma-mapping.h>
- #include <asm/types.h>
- #include <asm/setup.h>
- #include <asm/memory.h>
-@@ -178,10 +179,39 @@ static struct platform_device gtwx5715_s
- },
- };
-
-+static struct eth_plat_info gtwx5715_npeb_data = {
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x1e, /* ports 1-4 of the KS8995 switch */
-+ .rxq = 3,
-+ .txreadyq = 20,
-+};
-+
-+static struct eth_plat_info gtwx5715_npec_data = {
-+ .phy = 5, /* port 5 of the KS8995 switch */
-+ .rxq = 4,
-+ .txreadyq = 21,
-+};
-+
-+static struct platform_device gtwx5715_npeb_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = &gtwx5715_npeb_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
-+static struct platform_device gtwx5715_npec_device = {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = &gtwx5715_npec_data,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+};
-+
- static struct platform_device *gtwx5715_devices[] __initdata = {
- &gtwx5715_uart_device,
- &gtwx5715_flash,
- &gtwx5715_spi_bus,
-+ &gtwx5715_npeb_device,
-+ &gtwx5715_npec_device,
- };
-
- static void __init gtwx5715_init(void)
diff --git a/target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch b/target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch
deleted file mode 100644
index 2d3b6092cb..0000000000
--- a/target/linux/ixp4xx/patches-3.10/312-ixp4xx_pata_optimization.patch
+++ /dev/null
@@ -1,137 +0,0 @@
---- a/drivers/ata/pata_ixp4xx_cf.c
-+++ b/drivers/ata/pata_ixp4xx_cf.c
-@@ -24,16 +24,58 @@
- #include <scsi/scsi_host.h>
-
- #define DRV_NAME "pata_ixp4xx_cf"
--#define DRV_VERSION "0.2"
-+#define DRV_VERSION "0.3"
-
- static int ixp4xx_set_mode(struct ata_link *link, struct ata_device **error)
- {
-+ struct ixp4xx_pata_data *data = link->ap->host->dev->platform_data;
-+ unsigned int pio_mask;
- struct ata_device *dev;
-
- ata_for_each_dev(dev, link, ENABLED) {
-- ata_dev_info(dev, "configured for PIO0\n");
-- dev->pio_mode = XFER_PIO_0;
-- dev->xfer_mode = XFER_PIO_0;
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)) {
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)) {
-+ pio_mask = 4;
-+ } else {
-+ pio_mask = 3;
-+ }
-+ } else {
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+
-+ switch (pio_mask){
-+ case 0:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO0\n");
-+ dev->pio_mode = XFER_PIO_0;
-+ dev->xfer_mode = XFER_PIO_0;
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO1\n");
-+ dev->pio_mode = XFER_PIO_1;
-+ dev->xfer_mode = XFER_PIO_1;
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO2\n");
-+ dev->pio_mode = XFER_PIO_2;
-+ dev->xfer_mode = XFER_PIO_2;
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO3\n");
-+ dev->pio_mode = XFER_PIO_3;
-+ dev->xfer_mode = XFER_PIO_3;
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ ata_dev_printk(dev, KERN_INFO, "configured for PIO4\n");
-+ dev->pio_mode = XFER_PIO_4;
-+ dev->xfer_mode = XFER_PIO_4;
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
- dev->xfer_shift = ATA_SHIFT_PIO;
- dev->flags |= ATA_DFLAG_PIO;
- }
-@@ -46,6 +88,7 @@ static unsigned int ixp4xx_mmio_data_xfe
- unsigned int i;
- unsigned int words = buflen >> 1;
- u16 *buf16 = (u16 *) buf;
-+ unsigned int pio_mask;
- struct ata_port *ap = dev->link->ap;
- void __iomem *mmio = ap->ioaddr.data_addr;
- struct ixp4xx_pata_data *data = ap->host->dev->platform_data;
-@@ -53,8 +96,34 @@ static unsigned int ixp4xx_mmio_data_xfe
- /* set the expansion bus in 16bit mode and restore
- * 8 bit mode after the transaction.
- */
-- *data->cs0_cfg &= ~(0x01);
-- udelay(100);
-+ if (dev->id[ATA_ID_FIELD_VALID] & (1 << 1)){
-+ pio_mask = dev->id[ATA_ID_PIO_MODES] & 0x03;
-+ if (pio_mask & (1 << 1)){
-+ pio_mask = 4;
-+ }else{
-+ pio_mask = 3;
-+ }
-+ }else{
-+ pio_mask = (dev->id[ATA_ID_OLD_PIO_MODES] >> 8);
-+ }
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0xa9643c42;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x85033c42;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x80b23c42;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c42;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c42;
-+ break;
-+ }
-+ udelay(5);
-
- /* Transfer multiple of 2 bytes */
- if (rw == READ)
-@@ -79,8 +148,24 @@ static unsigned int ixp4xx_mmio_data_xfe
- words++;
- }
-
-- udelay(100);
-- *data->cs0_cfg |= 0x01;
-+ udelay(5);
-+ switch (pio_mask){
-+ case 0:
-+ *data->cs0_cfg = 0x8a473c03;
-+ break;
-+ case 1:
-+ *data->cs0_cfg = 0x86433c03;
-+ break;
-+ case 2:
-+ *data->cs0_cfg = 0x82413c03;
-+ break;
-+ case 3:
-+ *data->cs0_cfg = 0x80823c03;
-+ break;
-+ case 4:
-+ *data->cs0_cfg = 0x80403c03;
-+ break;
-+ }
-
- return words << 1;
- }
diff --git a/target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch b/target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch
deleted file mode 100644
index 1e02068ff9..0000000000
--- a/target/linux/ixp4xx/patches-3.10/500-usr8200_support.patch
+++ /dev/null
@@ -1,347 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -97,6 +97,14 @@ config MACH_SIDEWINDER
- Engineering Sidewinder board. For more information on this
- platform, see http://www.adiengineering.com
-
-+config MACH_USR8200
-+ bool "USRobotics USR8200"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the USRobotics
-+ USR8200 router board. For more information on this platform, see
-+ http://openwrt.org
-+
- config MACH_COMPEXWP18
- bool "Compex WP18 / NP18A"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -27,6 +27,7 @@ obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
-+obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-
- obj-y += common.o
-
-@@ -55,6 +56,7 @@ obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
-+obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
-
- obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
- obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -44,7 +44,8 @@ static __inline__ void __arch_decomp_set
- machine_is_gateway7001() || machine_is_wg302v2() ||
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
-- machine_is_wrt300nv2() || machine_is_tw5334())
-+ machine_is_wrt300nv2() || machine_is_tw5334() ||
-+ machine_is_usr8200())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-pci.c
-@@ -0,0 +1,77 @@
-+/*
-+ * arch/arch/mach-ixp4xx/usr8200-pci.c
-+ *
-+ * PCI setup routines for USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-pci.c
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Peter Denison <openwrt@marshadder.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init usr8200_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO7, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO8, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO9, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init usr8200_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == 14)
-+ return IRQ_IXP4XX_GPIO7;
-+ else if (slot == 15)
-+ return IRQ_IXP4XX_GPIO8;
-+ else if (slot == 16) {
-+ if (pin == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (pin == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else if (pin == 3)
-+ return IRQ_IXP4XX_GPIO9;
-+ else
-+ return -1;
-+ } else
-+ return -1;
-+}
-+
-+struct hw_pci usr8200_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = usr8200_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = usr8200_map_irq,
-+};
-+
-+int __init usr8200_pci_init(void)
-+{
-+ if (machine_is_usr8200())
-+ pci_common_init(&usr8200_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(usr8200_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/usr8200-setup.c
-@@ -0,0 +1,217 @@
-+/*
-+ * arch/arm/mach-ixp4xx/usr8200-setup.c
-+ *
-+ * Board setup for the USRobotics USR8200
-+ *
-+ * Copyright (C) 2008 Peter Denison <openwrt@marshadder.org>
-+ *
-+ * based on pronghorn-setup.c:
-+ * Copyright (C) 2008 Imre Kaloz <kaloz@openwrt.org>
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Peter Denison <openwrt@marshadder.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/types.h>
-+#include <linux/memory.h>
-+#include <linux/i2c-gpio.h>
-+#include <linux/leds.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/setup.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct flash_platform_data usr8200_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource usr8200_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device usr8200_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &usr8200_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &usr8200_flash_resource,
-+};
-+
-+static struct resource usr8200_uart_resources [] = {
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port usr8200_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device usr8200_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = usr8200_uart_data,
-+ },
-+ .num_resources = 2,
-+ .resource = usr8200_uart_resources,
-+};
-+
-+static struct gpio_led usr8200_led_pin[] = {
-+ {
-+ .name = "usr8200:usb1",
-+ .gpio = 0,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:usb2",
-+ .gpio = 1,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:ieee1394",
-+ .gpio = 2,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:internal",
-+ .gpio = 3,
-+ .active_low = 1,
-+ },
-+ {
-+ .name = "usr8200:power",
-+ .gpio = 14,
-+ }
-+};
-+
-+static struct gpio_led_platform_data usr8200_led_data = {
-+ .num_leds = ARRAY_SIZE(usr8200_led_pin),
-+ .leds = usr8200_led_pin,
-+};
-+
-+static struct platform_device usr8200_led = {
-+ .name = "leds-gpio",
-+ .id = -1,
-+ .dev.platform_data = &usr8200_led_data,
-+};
-+
-+static struct eth_plat_info usr8200_plat_eth[] = {
-+ { /* NPEC - LAN with Marvell 88E6060 switch */
-+ .phy = IXP4XX_ETH_PHY_MAX_ADDR,
-+ .phy_mask = 0x0F0000,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }, { /* NPEB - WAN */
-+ .phy = 9,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }
-+};
-+
-+static struct platform_device usr8200_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = usr8200_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = usr8200_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct resource usr8200_rtc_resources = {
-+ .flags = IORESOURCE_MEM
-+};
-+
-+static struct platform_device usr8200_rtc = {
-+ .name = "rtc7301",
-+ .id = 0,
-+ .num_resources = 1,
-+ .resource = &usr8200_rtc_resources,
-+};
-+
-+static struct platform_device *usr8200_devices[] __initdata = {
-+ &usr8200_flash,
-+ &usr8200_uart,
-+ &usr8200_led,
-+ &usr8200_eth[0],
-+ &usr8200_eth[1],
-+ &usr8200_rtc,
-+};
-+
-+static void __init usr8200_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ usr8200_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ usr8200_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_16M - 1;
-+
-+ usr8200_rtc_resources.start = IXP4XX_EXP_BUS_BASE(2);
-+ usr8200_rtc_resources.end = IXP4XX_EXP_BUS_BASE(2) + 0x01ff;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS2 = 0x3fff000 | IXP4XX_EXP_BUS_SIZE(0) | IXP4XX_EXP_BUS_WR_EN |
-+ IXP4XX_EXP_BUS_CS_EN | IXP4XX_EXP_BUS_BYTE_EN;
-+ *IXP4XX_GPIO_GPCLKR = 0x01100000;
-+
-+ /* configure button as input */
-+ gpio_line_config(12, IXP4XX_GPIO_IN);
-+
-+ platform_add_devices(usr8200_devices, ARRAY_SIZE(usr8200_devices));
-+}
-+
-+MACHINE_START(USR8200, "USRobotics USR8200")
-+ /* Maintainer: Peter Denison <openwrt@marshadder.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = usr8200_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
diff --git a/target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch b/target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch
deleted file mode 100644
index 035dfdf8c3..0000000000
--- a/target/linux/ixp4xx/patches-3.10/520-tw2662_support.patch
+++ /dev/null
@@ -1,317 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -180,6 +180,15 @@ config ARCH_PRPMC1100
- PrPCM1100 Processor Mezanine Module. For more information on
- this platform, see <file:Documentation/arm/IXP4xx>.
-
-+config MACH_TW2662
-+ bool "Titan Wireless TW-266-2"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support the Titan
-+ Wireless TW266-2. For more information on this platform,
-+ see http://openwrt.org
-+
-+
- config MACH_TW5334
- bool "Titan Wireless TW-533-4"
- select PCI
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -25,6 +25,7 @@ obj-pci-$(CONFIG_MACH_SIDEWINDER) += sid
- obj-pci-$(CONFIG_MACH_COMPEXWP18) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
- obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
-+obj-pci-$(CONFIG_MACH_TW2662) += tw2662-pci.o
- obj-pci-$(CONFIG_MACH_TW5334) += tw5334-pci.o
- obj-pci-$(CONFIG_MACH_MI424WR) += mi424wr-pci.o
- obj-pci-$(CONFIG_MACH_USR8200) += usr8200-pci.o
-@@ -54,6 +55,7 @@ obj-$(CONFIG_MACH_SIDEWINDER) += sidewin
- obj-$(CONFIG_MACH_COMPEXWP18) += compex42x-setup.o
- obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
- obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
-+obj-$(CONFIG_MACH_TW2662) += tw2662-setup.o
- obj-$(CONFIG_MACH_TW5334) += tw5334-setup.o
- obj-$(CONFIG_MACH_MI424WR) += mi424wr-setup.o
- obj-$(CONFIG_MACH_USR8200) += usr8200-setup.o
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,7 @@ static __inline__ void __arch_decomp_set
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- machine_is_wrt300nv2() || machine_is_tw5334() ||
-- machine_is_usr8200())
-+ machine_is_usr8200() || machine_is_tw2662())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-pci.c
-@@ -0,0 +1,67 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-pci.c
-+ *
-+ * PCI setup routines for Tiran Wireless TW-266-2 platform
-+ *
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ *
-+ * Maintainer: Deepak Saxena <dsaxena@mvista.com>
-+ * Maintainer: Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach/pci.h>
-+
-+#define SLOT0_DEVID 1
-+#define SLOT1_DEVID 3
-+
-+/* PCI controller GPIO to IRQ pin mappings */
-+#define SLOT0_INTA 11
-+#define SLOT1_INTA 9
-+
-+void __init tw2662_pci_preinit(void)
-+{
-+ irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT0_INTA), IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IXP4XX_GPIO_IRQ(SLOT1_INTA), IRQ_TYPE_LEVEL_LOW);
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init tw2662_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+ if (slot == SLOT0_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT0_INTA);
-+ else if (slot == SLOT1_DEVID)
-+ return IXP4XX_GPIO_IRQ(SLOT1_INTA);
-+ else return -1;
-+}
-+
-+struct hw_pci tw2662_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = tw2662_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = tw2662_map_irq,
-+};
-+
-+int __init tw2662_pci_init(void)
-+{
-+ if (machine_is_tw2662())
-+ pci_common_init(&tw2662_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(tw2662_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/tw2662-setup.c
-@@ -0,0 +1,197 @@
-+/*
-+ * arch/arm/mach-ixp4xx/tw2662-setup.c
-+ *
-+ * Titan Wireless TW-266-2
-+ *
-+ * Copyright (C) 2010 Gabor Juhos <juhosg@openwrt.org>
-+ * Copyright (C) 2010 Alexandros C. Couloumbis <alex@ozo.com>
-+ *
-+ * based on ap1000-setup.c:
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/if_ether.h>
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/slab.h>
-+#include <linux/netdevice.h>
-+#include <linux/etherdevice.h>
-+#include <linux/platform_device.h>
-+
-+#include <asm/io.h>
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/mach-types.h>
-+#include <asm/irq.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+/* gpio mask used by platform device */
-+#define TW2662_GPIO_MASK (1 << 1) | (1 << 3) | (1 << 5) | (1 << 7)
-+
-+static struct flash_platform_data tw2662_flash_data = {
-+ .map_name = "cfi_probe",
-+ .width = 2,
-+};
-+
-+static struct resource tw2662_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct platform_device tw2662_flash = {
-+ .name = "IXP4XX-Flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &tw2662_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &tw2662_flash_resource,
-+};
-+
-+static struct resource tw2662_uart_resources[] = {
-+ {
-+ .start = IXP4XX_UART1_BASE_PHYS,
-+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ },
-+ {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM
-+ }
-+};
-+
-+static struct plat_serial8250_port tw2662_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART1_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART1,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device tw2662_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev.platform_data = tw2662_uart_data,
-+ .num_resources = 2,
-+ .resource = tw2662_uart_resources
-+};
-+
-+/* Built-in 10/100 Ethernet MAC interfaces */
-+static struct eth_plat_info tw2662_plat_eth[] = {
-+ {
-+ .phy = 3,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device tw2662_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = tw2662_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = tw2662_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+
-+static struct platform_device *tw2662_devices[] __initdata = {
-+ &tw2662_flash,
-+ &tw2662_uart,
-+ &tw2662_eth[0],
-+ &tw2662_eth[1],
-+};
-+
-+static char tw2662_mem_fixup[] __initdata = "mem=64M ";
-+
-+static void __init tw2662_fixup(struct tag *tags, char **cmdline,
-+ struct meminfo *mi)
-+{
-+ struct tag *t = tags;
-+ char *p = *cmdline;
-+
-+ /* Find the end of the tags table, taking note of any cmdline tag. */
-+ for (; t->hdr.size; t = tag_next(t)) {
-+ if (t->hdr.tag == ATAG_CMDLINE) {
-+ p = t->u.cmdline.cmdline;
-+ }
-+ }
-+
-+ /* Overwrite the end of the table with a new cmdline tag. */
-+ t->hdr.tag = ATAG_CMDLINE;
-+ t->hdr.size = (sizeof (struct tag_header) +
-+ strlen(tw2662_mem_fixup) + strlen(p) + 1 + 4) >> 2;
-+ strlcpy(t->u.cmdline.cmdline, tw2662_mem_fixup, COMMAND_LINE_SIZE);
-+ strlcpy(t->u.cmdline.cmdline + strlen(tw2662_mem_fixup), p,
-+ COMMAND_LINE_SIZE - strlen(tw2662_mem_fixup));
-+
-+ /* Terminate the table. */
-+ t = tag_next(t);
-+ t->hdr.tag = ATAG_NONE;
-+ t->hdr.size = 0;
-+}
-+
-+static void __init tw2662_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ tw2662_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ tw2662_flash_resource.end =
-+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-+
-+ platform_add_devices(tw2662_devices, ARRAY_SIZE(tw2662_devices));
-+
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[0].hwaddr)))
-+ random_ether_addr(tw2662_plat_eth[0].hwaddr);
-+ if (!(is_valid_ether_addr(tw2662_plat_eth[1].hwaddr))) {
-+ memcpy(tw2662_plat_eth[1].hwaddr, tw2662_plat_eth[0].hwaddr, ETH_ALEN);
-+ tw2662_plat_eth[1].hwaddr[5] = (tw2662_plat_eth[0].hwaddr[5] + 1);
-+ }
-+
-+}
-+
-+#ifdef CONFIG_MACH_TW2662
-+MACHINE_START(TW2662, "Titan Wireless TW-266-2")
-+ /* Maintainer: Alexandros C. Couloumbis <alex@ozo.com> */
-+ .fixup = tw2662_fixup,
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x0100,
-+ .init_machine = tw2662_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
diff --git a/target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch b/target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch
deleted file mode 100644
index 3bd7c8c86f..0000000000
--- a/target/linux/ixp4xx/patches-3.10/530-ap42x_support.patch
+++ /dev/null
@@ -1,282 +0,0 @@
---- a/arch/arm/mach-ixp4xx/Kconfig
-+++ b/arch/arm/mach-ixp4xx/Kconfig
-@@ -8,6 +8,14 @@ menu "Intel IXP4xx Implementation Option
-
- comment "IXP4xx Platforms"
-
-+config MACH_AP42X
-+ bool "Tonze AP-422/425"
-+ select PCI
-+ help
-+ Say 'Y' here if you want your kernel to support Tonze's
-+ AP-422/425 boards. For more information on this platform,
-+ see http://tonze.com.tw
-+
- config MACH_NSLU2
- bool
- prompt "Linksys NSLU2"
---- a/arch/arm/mach-ixp4xx/Makefile
-+++ b/arch/arm/mach-ixp4xx/Makefile
-@@ -5,6 +5,7 @@
- obj-pci-y :=
- obj-pci-n :=
-
-+obj-pci-$(CONFIG_MACH_AP42X) += ap42x-pci.o
- obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
- obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
- obj-pci-$(CONFIG_MACH_CAMBRIA) += cambria-pci.o
-@@ -32,6 +33,7 @@ obj-pci-$(CONFIG_MACH_USR8200) += usr82
-
- obj-y += common.o
-
-+obj-$(CONFIG_MACH_AP42X) += ap42x-setup.o
- obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
- obj-$(CONFIG_MACH_AVILA) += avila-setup.o
- obj-$(CONFIG_MACH_CAMBRIA) += cambria-setup.o
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-pci.c
-@@ -0,0 +1,63 @@
-+/*
-+ * arch/arch/mach-ixp4xx/ap42x-pci.c
-+ *
-+ * PCI setup routines for Tonze AP-422/425
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-pci.c:
-+ * Copyright (C) 2002 Jungo Software Technologies.
-+ * Copyright (C) 2003 MontaVista Softwrae, Inc.
-+ *
-+ * Maintainer: Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/pci.h>
-+#include <linux/init.h>
-+#include <linux/irq.h>
-+
-+#include <asm/mach-types.h>
-+#include <mach/hardware.h>
-+
-+#include <asm/mach/pci.h>
-+
-+void __init ap42x_pci_preinit(void)
-+{
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO10, IRQ_TYPE_LEVEL_LOW);
-+ irq_set_irq_type(IRQ_IXP4XX_GPIO11, IRQ_TYPE_LEVEL_LOW);
-+
-+ ixp4xx_pci_preinit();
-+}
-+
-+static int __init ap42x_map_irq(const struct pci_dev *dev, u8 slot,
-+ u8 pin)
-+{
-+ if (slot == 1)
-+ return IRQ_IXP4XX_GPIO11;
-+ else if (slot == 2)
-+ return IRQ_IXP4XX_GPIO10;
-+ else return -1;
-+}
-+
-+struct hw_pci ap42x_pci __initdata = {
-+ .nr_controllers = 1,
-+ .preinit = ap42x_pci_preinit,
-+ .ops = &ixp4xx_ops,
-+ .setup = ixp4xx_setup,
-+ .map_irq = ap42x_map_irq,
-+};
-+
-+int __init ap42x_pci_init(void)
-+{
-+ if (machine_is_ap42x())
-+ pci_common_init(&ap42x_pci);
-+ return 0;
-+}
-+
-+subsys_initcall(ap42x_pci_init);
---- /dev/null
-+++ b/arch/arm/mach-ixp4xx/ap42x-setup.c
-@@ -0,0 +1,166 @@
-+/*
-+ * arch/arm/mach-ixp4xx/ap42x-setup.c
-+ *
-+ * Board setup for the Tonze AP-42x boards
-+ *
-+ * Copyright (C) 2012 Imre Kaloz <kaloz@openwrt.org>
-+ *
-+ * based on coyote-setup.c:
-+ * Copyright (C) 2003-2005 MontaVista Software, Inc.
-+ *
-+ * Author: Imre Kaloz <Kaloz@openwrt.org>
-+ */
-+
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/device.h>
-+#include <linux/serial.h>
-+#include <linux/tty.h>
-+#include <linux/serial_8250.h>
-+#include <linux/mtd/physmap.h>
-+#include <linux/dma-mapping.h>
-+
-+#include <asm/types.h>
-+#include <asm/setup.h>
-+#include <asm/memory.h>
-+#include <mach/hardware.h>
-+#include <asm/irq.h>
-+#include <asm/mach-types.h>
-+#include <asm/mach/arch.h>
-+#include <asm/mach/flash.h>
-+
-+static struct mtd_partition ap42x_flash_partitions[] = {
-+ {
-+ .name = "RedBoot",
-+ .offset = 0x00000000,
-+ .size = 0x00080000,
-+ }, {
-+ .name = "linux",
-+ .offset = 0x00080000,
-+ .size = 0x00100000,
-+ }, {
-+ .name = "rootfs",
-+ .offset = 0x00180000,
-+ .size = 0x00660000,
-+ }, {
-+ .name = "FIS directory",
-+ .offset = 0x007f8000,
-+ .size = 0x00007000,
-+ }, {
-+ .name = "RedBoot config",
-+ .offset = 0x007ff000,
-+ .size = 0x00001000,
-+ },
-+};
-+
-+static struct physmap_flash_data ap42x_flash_data = {
-+ .width = 2,
-+ .parts = ap42x_flash_partitions,
-+ .nr_parts = ARRAY_SIZE(ap42x_flash_partitions),
-+};
-+
-+static struct resource ap42x_flash_resource = {
-+ .flags = IORESOURCE_MEM,
-+ .start = IXP4XX_EXP_BUS_BASE_PHYS,
-+ .end = IXP4XX_EXP_BUS_BASE_PHYS + SZ_8M - 1,
-+};
-+
-+static struct platform_device ap42x_flash = {
-+ .name = "physmap-flash",
-+ .id = 0,
-+ .dev = {
-+ .platform_data = &ap42x_flash_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap42x_flash_resource,
-+};
-+
-+static struct resource ap42x_uart_resource = {
-+ .start = IXP4XX_UART2_BASE_PHYS,
-+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff,
-+ .flags = IORESOURCE_MEM,
-+};
-+
-+static struct plat_serial8250_port ap42x_uart_data[] = {
-+ {
-+ .mapbase = IXP4XX_UART2_BASE_PHYS,
-+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET,
-+ .irq = IRQ_IXP4XX_UART2,
-+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
-+ .iotype = UPIO_MEM,
-+ .regshift = 2,
-+ .uartclk = IXP4XX_UART_XTAL,
-+ },
-+ { },
-+};
-+
-+static struct platform_device ap42x_uart = {
-+ .name = "serial8250",
-+ .id = PLAT8250_DEV_PLATFORM,
-+ .dev = {
-+ .platform_data = ap42x_uart_data,
-+ },
-+ .num_resources = 1,
-+ .resource = &ap42x_uart_resource,
-+};
-+
-+static struct eth_plat_info ap42x_plat_eth[] = {
-+ {
-+ .phy = 2,
-+ .rxq = 3,
-+ .txreadyq = 20,
-+ }, {
-+ .phy = 1,
-+ .rxq = 4,
-+ .txreadyq = 21,
-+ }
-+};
-+
-+static struct platform_device ap42x_eth[] = {
-+ {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEB,
-+ .dev.platform_data = ap42x_plat_eth,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }, {
-+ .name = "ixp4xx_eth",
-+ .id = IXP4XX_ETH_NPEC,
-+ .dev.platform_data = ap42x_plat_eth + 1,
-+ .dev.coherent_dma_mask = DMA_BIT_MASK(32),
-+ }
-+};
-+
-+static struct platform_device *ap42x_devices[] __initdata = {
-+ &ap42x_flash,
-+ &ap42x_uart,
-+ &ap42x_eth[0],
-+ &ap42x_eth[1],
-+};
-+
-+static void __init ap42x_init(void)
-+{
-+ ixp4xx_sys_init();
-+
-+ ap42x_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
-+ ap42x_flash_resource.end = IXP4XX_EXP_BUS_BASE(0) + SZ_32M - 1;
-+
-+ *IXP4XX_EXP_CS0 |= IXP4XX_FLASH_WRITABLE;
-+ *IXP4XX_EXP_CS1 = *IXP4XX_EXP_CS0;
-+
-+ platform_add_devices(ap42x_devices, ARRAY_SIZE(ap42x_devices));
-+}
-+
-+#ifdef CONFIG_MACH_AP42X
-+MACHINE_START(AP42X, "Tonze AP-422/425")
-+ /* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
-+ .map_io = ixp4xx_map_io,
-+ .init_irq = ixp4xx_init_irq,
-+ .init_time = ixp4xx_timer_init,
-+ .atag_offset = 0x100,
-+ .init_machine = ap42x_init,
-+#if defined(CONFIG_PCI)
-+ .dma_zone_size = SZ_64M,
-+#endif
-+ .restart = ixp4xx_restart,
-+MACHINE_END
-+#endif
---- a/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-+++ b/arch/arm/mach-ixp4xx/include/mach/uncompress.h
-@@ -45,7 +45,8 @@ static __inline__ void __arch_decomp_set
- machine_is_devixp() || machine_is_miccpt() || machine_is_mic256() ||
- machine_is_pronghorn() || machine_is_pronghorn_metro() ||
- machine_is_wrt300nv2() || machine_is_tw5334() ||
-- machine_is_usr8200() || machine_is_tw2662())
-+ machine_is_usr8200() || machine_is_tw2662() ||
-+ machine_is_ap42x())
- uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS;
- else
- uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS;
diff --git a/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch b/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch
deleted file mode 100644
index c435623588..0000000000
--- a/target/linux/ixp4xx/patches-3.10/600-skb_avoid_dmabounce.patch
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/net/core/skbuff.c
-+++ b/net/core/skbuff.c
-@@ -210,6 +210,9 @@ struct sk_buff *__alloc_skb(unsigned int
-
- if (sk_memalloc_socks() && (flags & SKB_ALLOC_RX))
- gfp_mask |= __GFP_MEMALLOC;
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-
- /* Get the HEAD */
- skb = kmem_cache_alloc_node(cache, gfp_mask & ~__GFP_DMA, node);
-@@ -1054,6 +1057,10 @@ int pskb_expand_head(struct sk_buff *skb
- if (skb_shared(skb))
- BUG();
-
-+#ifdef CONFIG_ARCH_IXP4XX
-+ gfp_mask |= GFP_DMA;
-+#endif
-+
- size = SKB_DATA_ALIGN(size);
-
- if (skb_pfmemalloc(skb))
diff --git a/target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch b/target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch
deleted file mode 100644
index 24c93dc741..0000000000
--- a/target/linux/ixp4xx/patches-3.10/900-ixp4xx-crypto-include-module.h.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/drivers/crypto/ixp4xx_crypto.c
-+++ b/drivers/crypto/ixp4xx_crypto.c
-@@ -14,6 +14,7 @@
- #include <linux/dmapool.h>
- #include <linux/crypto.h>
- #include <linux/kernel.h>
-+#include <linux/module.h>
- #include <linux/rtnetlink.h>
- #include <linux/interrupt.h>
- #include <linux/spinlock.h>
diff --git a/target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch b/target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch
deleted file mode 100644
index 06e09f469d..0000000000
--- a/target/linux/ixp4xx/patches-3.10/910-ixp4xx-nr_irq_lines.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -53,7 +53,7 @@ static int __init ixdp425_map_irq(const
- };
-
- if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }
---- a/arch/arm/mach-ixp4xx/miccpt-pci.c
-+++ b/arch/arm/mach-ixp4xx/miccpt-pci.c
-@@ -54,7 +54,7 @@ static int __init miccpt_map_irq(const s
- };
-
- if (slot >= 1 && slot <= MAX_DEV && pin >= 1 && pin <= IRQ_LINES)
-- return pci_irq_table[(slot + pin - 2) % 4];
-+ return pci_irq_table[(slot + pin - 2) % IRQ_LINES];
-
- return -1;
- }