Add new package for configuring 6rd tunnels.

This patch adds support for manually configuring 6rd tunnels. It depends on
the netifd patches I sent earlier, which add 6rd support.

A basic interface configuration looks like:

    config interface 'wan6'
      option proto '6rd'
      option peeraddr '192.0.2.1'
      option ip6prefix '2123::'
      option ip6prefixlen '16'
      option ip4prefixlen '0'

Where ip4prefixlen is optional and actually defaults to 0, which would use all
bits of the IPv4 in the calculated IPv6 subnet.

I believe it should be possible to configure a regular 6to4 tunnel using this,
and that we may want to merge the two eventually, but there are some larger

differences between the two at the moment:

 - 6rd addresses can be more difficult to calculate. My ISP, for example, has
   a setup with a v6 mask of 43 bits, and a v4 mask of 19.

 - 6to4 has support for configuring radvd. This is something we want, of
   course, but it seems best to deal with this in a separate patch.

Just creating a new package looked like the quickest way to get this in.

This work is based on the 6in4 package, and work by Stijn Tintel.

Signed-off-by: Stéphan Kochen <stephan@kochen.nl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@32431 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 83 insertions, 0 deletions

diff --git a/package/6rd/files/6rd.sh b/package/6rd/files/6rd.sh
new file mode 100644
index 0000000000..3786ef06f9
--- /dev/null
+++ b/package/6rd/files/6rd.sh
@@ -0,0 +1,83 @@
+#!/bin/sh
+# 6rd.sh - IPv6-in-IPv4 tunnel backend
+# Copyright (c) 2010-2012 OpenWrt.org
+
+[ -n "$INCLUDE_ONLY" ] || {
+	. /lib/functions.sh
+	. /lib/functions/network.sh
+	. ../netifd-proto.sh
+	init_proto "$@"
+}
+
+tun_error() {
+	local cfg="$1"; shift;
+
+	[ -n "$1" ] && proto_notify_error "$cfg" "$@"
+	proto_block_restart "$cfg"
+}
+
+proto_6rd_setup() {
+	local cfg="$1"
+	local iface="$2"
+	local link="6rd-$cfg"
+
+	local mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen
+	json_get_vars mtu ttl ipaddr peeraddr ip6prefix ip6prefixlen ip4prefixlen
+
+	[ -z "$ip6prefix" -o -z "$peeraddr" ] && {
+		tun_error "$cfg" "MISSING_ADDRESS"
+		return
+	}
+
+	[ -z "$ipaddr" ] && {
+		local wanif
+		if ! network_find_wan wanif || ! network_get_ipaddr ipaddr "$wanif"; then
+			tun_error "$cfg" "NO_WAN_LINK"
+			return
+		fi
+	}
+
+	# Determine the relay prefix.
+	local ip4prefixlen="${ip4prefixlen:-0}"
+	local ip4prefix=$(ipcalc.sh "$ipaddr/$ip4prefixlen" | grep NETWORK)
+	ip4prefix="${ip4prefix#NETWORK=}"
+
+	# Determine our IPv6 address.
+	local ip6subnet=$(6rdcalc "$ip6prefix/$ip6prefixlen" "$ipaddr/$ip4prefixlen")
+	local ip6addr="${ip6subnet%%::*}::1"
+
+	proto_init_update "$link" 1
+	proto_add_ipv6_address "$ip6addr" "$ip6prefixlen"
+	proto_add_ipv6_route "::" 0 "::$peeraddr"
+
+	proto_add_tunnel
+	json_add_string mode sit
+	json_add_int mtu "${mtu:-1280}"
+	json_add_int ttl "${ttl:-64}"
+	json_add_string local "$ipaddr"
+	json_add_string 6rd-prefix "$ip6prefix/$ip6prefixlen"
+	json_add_string 6rd-relay-prefix "$ip4prefix/$ip4prefixlen"
+	proto_close_tunnel
+
+	proto_send_update "$cfg"
+}
+
+proto_6rd_teardown() {
+	local cfg="$1"
+}
+
+proto_6rd_init_config() {
+	no_device=1
+	available=1
+
+	proto_config_add_int "mtu"
+	proto_config_add_int "ttl"
+	proto_config_add_string "peeraddr"
+	proto_config_add_string "ip6prefix"
+	proto_config_add_string "ip6prefixlen"
+	proto_config_add_string "ip4prefixlen"
+}
+
+[ -n "$INCLUDE_ONLY" ] || {
+	add_protocol 6rd
+}