packages: bump uboot-sunxi to enable H3 support

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>



git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47959 3c298f89-4303-0410-b956-a3cf2f4a3e73

4 files changed, 14 insertions, 330 deletions

diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index b08f9ed1df..8471bb3cf4 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=u-boot
-PKG_VERSION:=2015.07
+PKG_VERSION:=2016.01-rc2
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
 PKG_SOURCE_URL:= \
 	http://mirror2.openwrt.org/sources \
 	ftp://ftp.denx.de/pub/u-boot
 
-PKG_MD5SUM:=3dac9a0b46fed77fc768ad3bd2d68c05
+PKG_MD5SUM:=aca6c7a38534812ab529e90aae976422
 
 PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
 
@@ -66,6 +66,10 @@ define uboot/Cubietruck
   TITLE:=U-Boot for Cubietruck
 endef
 
+define uboot/Hummingbird_A31
+  TITLE:=U-Boot for the Hummingbird A31 board
+endef
+
 define uboot/Mele_M9
   TITLE:=U-Boot for the Mele M9 (A31)
 endef
@@ -86,6 +90,10 @@ define uboot/Lamobo_R1
   TITLE:=U-Boot for Lamobo R1
 endef
 
+define uboot/orangepi_plus
+  TITLE:=U-Boot for Orange Pi Plus (H3)
+endef
+
 UBOOTS:= \
 	A10-OLinuXino-Lime \
 	A13-OLinuXino \
@@ -96,11 +104,13 @@ UBOOTS:= \
 	Cubieboard \
 	Cubieboard2 \
 	Cubietruck \
+	Hummingbird_A31 \
 	Mele_M9 \
 	OLIMEX_A13_SOM \
 	Linksprite_pcDuino \
 	Linksprite_pcDuino3 \
 	Lamobo_R1 \
+	orangepi_plus
 
 define Package/uboot/template
 define Package/uboot-sunxi-$(1)
diff --git a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
deleted file mode 100644
index 0f7196fc11..0000000000
--- a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
+++ /dev/null
@@ -1,285 +0,0 @@
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 9c735c6..a32d772 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- 	sun7i-a20-ainol-aw1.dtb \
- 	sun7i-a20-bananapi.dtb \
- 	sun7i-a20-bananapro.dtb \
-+	sun7i-a20-lamobo-r1.dtb \
- 	sun7i-a20-cubieboard2.dtb \
- 	sun7i-a20-cubietruck.dtb \
- 	sun7i-a20-hummingbird.dtb \
-diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-new file mode 100644
-index 0000000..a77fb5c
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -0,0 +1,231 @@
-+/*
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ *  a) This file is free software; you can redistribute it and/or
-+ *     modify it under the terms of the GNU General Public License as
-+ *     published by the Free Software Foundation; either version 2 of the
-+ *     License, or (at your option) any later version.
-+ *
-+ *     This file is distributed in the hope that it will be useful,
-+ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ *     GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ *  b) Permission is hereby granted, free of charge, to any person
-+ *     obtaining a copy of this software and associated documentation
-+ *     files (the "Software"), to deal in the Software without
-+ *     restriction, including without limitation the rights to use,
-+ *     copy, modify, merge, publish, distribute, sublicense, and/or
-+ *     sell copies of the Software, and to permit persons to whom the
-+ *     Software is furnished to do so, subject to the following
-+ *     conditions:
-+ *
-+ *     The above copyright notice and this permission notice shall be
-+ *     included in all copies or substantial portions of the Software.
-+ *
-+ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ *     OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+	model = "Lamobo Banana Pi R1";
-+	compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
-+
-+	aliases {
-+		serial0 = &uart0;
-+		serial1 = &uart3;
-+		serial2 = &uart7;
-+	};
-+
-+	chosen {
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&led_pins_bananapi>;
-+
-+		green {
-+			label = "bananapi:green:usr";
-+			gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-+		};
-+	};
-+
-+	reg_gmac_3v3: gmac-3v3 {
-+		compatible = "regulator-fixed";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&gmac_power_pin_bananapi>;
-+		regulator-name = "gmac-3v3";
-+		regulator-min-microvolt = <3300000>;
-+		regulator-max-microvolt = <3300000>;
-+		startup-delay-us = <100000>;
-+		enable-active-high;
-+		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
-+	};
-+};
-+
-+&ahci {
-+	status = "okay";
-+};
-+
-+&ehci0 {
-+	status = "okay";
-+};
-+
-+&ehci1 {
-+	status = "okay";
-+};
-+
-+&gmac {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&gmac_pins_rgmii_a>;
-+	phy = <&phy1>;
-+	phy-mode = "rgmii";
-+	phy-supply = <&reg_gmac_3v3>;
-+	status = "okay";
-+
-+	phy1: ethernet-phy@1 {
-+		reg = <1>;
-+	};
-+};
-+
-+&i2c0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c0_pins_a>;
-+	status = "okay";
-+
-+	axp209: pmic@34 {
-+		compatible = "x-powers,axp209";
-+		reg = <0x34>;
-+		interrupt-parent = <&nmi_intc>;
-+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+
-+		interrupt-controller;
-+		#interrupt-cells = <1>;
-+	};
-+};
-+
-+&i2c2 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&i2c2_pins_a>;
-+	status = "okay";
-+};
-+
-+&ir0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&ir0_rx_pins_a>;
-+	status = "okay";
-+};
-+
-+&mmc0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	bus-width = <4>;
-+	cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+	cd-inverted;
-+	status = "okay";
-+};
-+
-+&ohci0 {
-+	status = "okay";
-+};
-+
-+&ohci1 {
-+	status = "okay";
-+};
-+
-+&pio {
-+	mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-+		allwinner,pins = "PH10";
-+		allwinner,function = "gpio_in";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+	};
-+
-+	gmac_power_pin_bananapi: gmac_power_pin@0 {
-+		allwinner,pins = "PH23";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	led_pins_bananapi: led_pins@0 {
-+		allwinner,pins = "PH24";
-+		allwinner,function = "gpio_out";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+	};
-+
-+	ir0_tx_pins_a: ir0@1 {
-+		allwinner,pins = "PB3";
-+		allwinner,function = "ir0";
-+		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+		allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+		};
-+
-+};
-+
-+&reg_usb1_vbus {
-+	status = "okay";
-+};
-+
-+&reg_usb2_vbus {
-+	status = "okay";
-+};
-+
-+&spi0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&spi0_pins_a>,
-+		    <&spi0_cs0_pins_a>,
-+		    <&spi0_cs1_pins_a>;
-+	status = "okay";
-+};
-+
-+&uart0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart0_pins_a>;
-+	status = "okay";
-+};
-+
-+&uart3 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart3_pins_b>;
-+	status = "okay";
-+};
-+
-+&uart7 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&uart7_pins_a>;
-+	status = "okay";
-+};
-+
-+&usbphy {
-+	usb1_vbus-supply = <&reg_usb1_vbus>;
-+	usb2_vbus-supply = <&reg_usb2_vbus>;
-+	status = "okay";
-+};
-diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
-index 7a42055..abf2c1c 100644
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -30,6 +30,7 @@ F:	include/configs/sun7i.h
- F:	configs/A20-OLinuXino_MICRO_defconfig
- F:	configs/Bananapi_defconfig
- F:	configs/Bananapro_defconfig
-+F:	configs/Lamobo_R1_defconfig
- F:	configs/i12-tvbox_defconfig
- F:	configs/Linksprite_pcDuino3_defconfig
- F:	configs/Linksprite_pcDuino3_fdt_defconfig
-diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
-new file mode 100644
-index 0000000..bf665e7
---- /dev/null
-+++ b/configs/Lamobo_R1_defconfig
-@@ -0,0 +1,17 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN7I=y
-+CONFIG_DRAM_CLK=432
-+CONFIG_GMAC_TX_DELAY=4
-+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-+CONFIG_ETH_DESIGNWARE=y
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
-+CONFIG_DM_SERIAL=y
-+CONFIG_USB=y
-+CONFIG_DM_USB=y
-+CONFIG_NETDEVICES=y
-+CONFIG_NET=y
diff --git a/package/boot/uboot-sunxi/patches/003-add-olimex-a13-som.diff b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff
index e160b3da10..a8c5b3d938 100644
--- a/package/boot/uboot-sunxi/patches/003-add-olimex-a13-som.diff
+++ b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff
@@ -1,7 +1,7 @@
 diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig
 --- u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig	1970-01-01 01:00:00.000000000 +0100
 +++ u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig	2015-01-18 16:25:11.908986082 +0100
-@@ -0,0 +1,15 @@
+@@ -0,0 +1,16 @@
 +CONFIG_SPL=y
 +CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,NO_AXP,USB_EHCI"
 +CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
@@ -17,3 +17,4 @@ diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/con
 +CONFIG_DM_SERIAL=y
 +CONFIG_USB=y
 +CONFIG_DM_USB=y
++CONFIG_SYS_NS16550=y
diff --git a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
deleted file mode 100644
index 964aa577b1..0000000000
--- a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-diff --git a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
-new file mode 100644
-index 0000000..180b60b
---- /dev/null
-+++ b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
-@@ -0,0 +1,36 @@
-+From 8a5481e2e51a86e858c4f1481729421f26cc240c Mon Sep 17 00:00:00 2001
-+From: Yousong Zhou <yszhou4tech@gmail.com>
-+Date: Sat, 29 Aug 2015 21:26:11 +0800
-+Subject: [PATCH] sunxi: mmc: set transfer timeout according to byte_cnt.
-+
-+Originally a timeout value of 2 seconds was used regardless of the size
-+of data to be transfered.  This prevented slow devices from working
-+correctly while there was no much gain for faster devices, e.g. it takes
-+3708ms for a transfer of uImage of size 1899008 bytes.
-+
-+Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
-+---
-+ drivers/mmc/sunxi_mmc.c |    6 ++++--
-+ 1 file changed, 4 insertions(+), 2 deletions(-)
-+
-+diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
-+index e7ab828..7a990f7 100644
-+--- a/drivers/mmc/sunxi_mmc.c
-++++ b/drivers/mmc/sunxi_mmc.c
-+@@ -257,9 +257,11 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
-+ 	const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
-+ 					      SUNXI_MMC_STATUS_FIFO_FULL;
-+ 	unsigned i;
-+-	unsigned byte_cnt = data->blocksize * data->blocks;
-+-	unsigned timeout_msecs = 2000;
-+ 	unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
-++	unsigned byte_cnt = data->blocksize * data->blocks;
-++	unsigned timeout_msecs = byte_cnt >> 8;
-++	if (timeout_msecs < 2000)
-++		timeout_msecs = 2000;
-+ 
-+ 	/* Always read / write data through the CPU */
-+ 	setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
-+-- 
-+1.7.10.4
-+