diff options
author | Alexandros C. Couloumbis <alex@ozo.com> | 2010-08-12 14:13:52 +0000 |
---|---|---|
committer | Alexandros C. Couloumbis <alex@ozo.com> | 2010-08-12 14:13:52 +0000 |
commit | 4a350c452e365c8711fbdee156fe805550b3055a (patch) | |
tree | c319143a5b505f3a1f3918e604e3e221c124a6e7 /package/mac80211/patches/800-nuke_led_code.patch | |
parent | fcc45163338ba8d373211a6c718bc624ff45cb9e (diff) | |
download | master-187ad058-4a350c452e365c8711fbdee156fe805550b3055a.tar.gz master-187ad058-4a350c452e365c8711fbdee156fe805550b3055a.tar.bz2 master-187ad058-4a350c452e365c8711fbdee156fe805550b3055a.zip |
package/mac80211: fix r22422, add missing bits & bytes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@22611 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'package/mac80211/patches/800-nuke_led_code.patch')
-rw-r--r-- | package/mac80211/patches/800-nuke_led_code.patch | 433 |
1 files changed, 433 insertions, 0 deletions
diff --git a/package/mac80211/patches/800-nuke_led_code.patch b/package/mac80211/patches/800-nuke_led_code.patch new file mode 100644 index 0000000000..b55a0501eb --- /dev/null +++ b/package/mac80211/patches/800-nuke_led_code.patch @@ -0,0 +1,433 @@ +--- a/config.mk ++++ b/config.mk +@@ -115,7 +115,7 @@ CONFIG_COMPAT_MAC80211_RC_DEFAULT=minstr + # CONFIG_MAC80211_RC_PID=y + CONFIG_MAC80211_RC_MINSTREL=y + CONFIG_MAC80211_RC_MINSTREL_HT=y +-CONFIG_MAC80211_LEDS=y ++# CONFIG_MAC80211_LEDS=y + + # enable mesh networking too + CONFIG_MAC80211_MESH=y +@@ -194,7 +194,7 @@ CONFIG_B43_PCI_AUTOSELECT=y + ifneq ($(CONFIG_PCMCIA),) + # CONFIG_B43_PCMCIA=y + endif +-CONFIG_B43_LEDS=y ++# CONFIG_B43_LEDS=y + CONFIG_B43_PHY_LP=y + # CONFIG_B43_NPHY is not set + # CONFIG_B43_FORCE_PIO=y +@@ -203,7 +203,7 @@ CONFIG_B43_PHY_LP=y + CONFIG_B43LEGACY=m + CONFIG_B43LEGACY_HWRNG=y + CONFIG_B43LEGACY_PCI_AUTOSELECT=y +-CONFIG_B43LEGACY_LEDS=y ++# CONFIG_B43LEGACY_LEDS=y + # CONFIG_B43LEGACY_DEBUG=y + CONFIG_B43LEGACY_DMA=y + CONFIG_B43LEGACY_PIO=y +@@ -336,13 +336,13 @@ endif + + CONFIG_P54_USB=m + CONFIG_RTL8187=m +-CONFIG_RTL8187_LEDS=y ++# CONFIG_RTL8187_LEDS=y + + CONFIG_AT76C50X_USB=m + + ifndef CONFIG_COMPAT_KERNEL_28 + CONFIG_AR9170_USB=m +-CONFIG_AR9170_LEDS=y ++# CONFIG_AR9170_LEDS=y + endif + + CONFIG_ATH9K_HTC=m +@@ -426,7 +426,7 @@ CONFIG_RT2800_LIB=m + CONFIG_RT2X00_LIB_HT=y + CONFIG_RT2X00_LIB_FIRMWARE=y + CONFIG_RT2X00_LIB_CRYPTO=y +-CONFIG_RT2X00_LIB_LEDS=y ++# CONFIG_RT2X00_LIB_LEDS=y + # CONFIG_RT2X00_DEBUG=y + # CONFIG_RT2X00_LIB_DEBUGFS + endif +@@ -437,7 +437,7 @@ endif + + # p54 + CONFIG_P54_COMMON=m +-CONFIG_P54_LEDS=y ++# CONFIG_P54_LEDS=y + + # Atheros + CONFIG_ATH_COMMON=m +--- a/include/linux/compat-2.6.25.h ++++ b/include/linux/compat-2.6.25.h +@@ -146,10 +146,12 @@ static inline void __hwrng_unregister(st + hwrng_unregister(rng); + } + ++#ifdef CONFIG_MAC80211_LEDS + static inline void led_classdev_unregister_suspended(struct led_classdev *lcd) + { + led_classdev_unregister(lcd); + } ++#endif + + /** + * The following things are out of ./include/linux/kernel.h +--- a/drivers/net/wireless/ath/ath9k/gpio.c ++++ b/drivers/net/wireless/ath/ath9k/gpio.c +@@ -20,6 +20,7 @@ + /* LED functions */ + /********************************/ + ++#ifdef CONFIG_MAC80211_LEDS + static void ath_led_blink_work(struct work_struct *work) + { + struct ath_softc *sc = container_of(work, struct ath_softc, +@@ -194,6 +195,7 @@ fail: + cancel_delayed_work_sync(&sc->ath_led_blink_work); + ath_deinit_leds(sc); + } ++#endif + + /*******************/ + /* Rfkill */ +--- a/drivers/net/wireless/ath/ath9k/pci.c ++++ b/drivers/net/wireless/ath/ath9k/pci.c +@@ -273,7 +273,9 @@ static int ath_pci_suspend(struct pci_de + struct ath_wiphy *aphy = hw->priv; + struct ath_softc *sc = aphy->sc; + ++#ifdef CONFIG_MAC80211_LEDS + ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); ++#endif + + pci_save_state(pdev); + pci_disable_device(pdev); +@@ -305,10 +307,12 @@ static int ath_pci_resume(struct pci_dev + if ((val & 0x0000ff00) != 0) + pci_write_config_dword(pdev, 0x40, val & 0xffff00ff); + ++#ifdef CONFIG_MAC80211_LEDS + /* Enable LED */ + ath9k_hw_cfg_output(sc->sc_ah, sc->sc_ah->led_pin, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(sc->sc_ah, sc->sc_ah->led_pin, 1); ++#endif + + return 0; + } +--- a/drivers/net/wireless/ath/ath9k/ath9k.h ++++ b/drivers/net/wireless/ath/ath9k/ath9k.h +@@ -465,6 +465,7 @@ void ath9k_btcoex_timer_pause(struct ath + /********************/ + /* LED Control */ + /********************/ ++#ifdef CONFIG_MAC80211_LEDS + + #define ATH_LED_PIN_DEF 1 + #define ATH_LED_PIN_9287 8 +@@ -489,6 +490,7 @@ struct ath_led { + + void ath_init_leds(struct ath_softc *sc); + void ath_deinit_leds(struct ath_softc *sc); ++#endif + + /********************/ + /* Main driver core */ +@@ -586,6 +588,7 @@ struct ath_softc { + enum wireless_mode cur_rate_mode; + struct ieee80211_supported_band sbands[IEEE80211_NUM_BANDS]; + ++#ifdef CONFIG_MAC80211_LEDS + struct ath_led radio_led; + struct ath_led assoc_led; + struct ath_led tx_led; +@@ -595,6 +598,7 @@ struct ath_softc { + int led_off_duration; + int led_on_cnt; + int led_off_cnt; ++#endif + + int beacon_interval; + +--- a/drivers/net/wireless/ath/ath9k/init.c ++++ b/drivers/net/wireless/ath/ath9k/init.c +@@ -34,9 +34,11 @@ int modparam_nohwcrypt; + module_param_named(nohwcrypt, modparam_nohwcrypt, int, 0444); + MODULE_PARM_DESC(nohwcrypt, "Disable hardware encryption"); + ++#ifdef CONFIG_MAC80211_LEDS + int led_blink = 1; + module_param_named(blink, led_blink, int, 0444); + MODULE_PARM_DESC(blink, "Enable LED blink on activity"); ++#endif + + /* We use the hw_value as an index into our private channel structure */ + +@@ -757,7 +759,9 @@ int ath9k_init_device(u16 devid, struct + INIT_DELAYED_WORK(&sc->wiphy_work, ath9k_wiphy_work); + sc->wiphy_scheduler_int = msecs_to_jiffies(500); + ++#ifdef CONFIG_MAC80211_LEDS + ath_init_leds(sc); ++#endif + ath_start_rfkill_poll(sc); + + return 0; +@@ -810,7 +814,9 @@ void ath9k_deinit_device(struct ath_soft + ath9k_ps_wakeup(sc); + + wiphy_rfkill_stop_polling(sc->hw->wiphy); ++#ifdef CONFIG_MAC80211_LEDS + ath_deinit_leds(sc); ++#endif + + for (i = 0; i < sc->num_sec_wiphy; i++) { + struct ath_wiphy *aphy = sc->sec_wiphy[i]; +--- a/drivers/net/wireless/ath/ath9k/main.c ++++ b/drivers/net/wireless/ath/ath9k/main.c +@@ -868,9 +868,11 @@ void ath_radio_enable(struct ath_softc * + ath9k_hw_set_interrupts(ah, ah->imask); + + /* Enable LED */ ++#ifdef CONFIG_MAC80211_LEDS + ath9k_hw_cfg_output(ah, ah->led_pin, + AR_GPIO_OUTPUT_MUX_AS_OUTPUT); + ath9k_hw_set_gpio(ah, ah->led_pin, 0); ++#endif + + ieee80211_wake_queues(hw); + ath9k_ps_restore(sc); +@@ -889,10 +891,12 @@ void ath_radio_disable(struct ath_softc + * Keep the LED on when the radio is disabled + * during idle unassociated state. + */ ++#ifdef CONFIG_MAC80211_LEDS + if (!sc->ps_idle) { + ath9k_hw_set_gpio(ah, ah->led_pin, 1); + ath9k_hw_cfg_gpio_input(ah, ah->led_pin); + } ++#endif + + /* Disable interrupts */ + ath9k_hw_set_interrupts(ah, 0); +@@ -1303,8 +1307,10 @@ static void ath9k_stop(struct ieee80211_ + + aphy->state = ATH_WIPHY_INACTIVE; + ++#ifdef CONFIG_MAC80211_LEDS + if (led_blink) + cancel_delayed_work_sync(&sc->ath_led_blink_work); ++#endif + + cancel_delayed_work_sync(&sc->tx_complete_work); + cancel_work_sync(&sc->paprd_work); +--- a/net/mac80211/iface.c ++++ b/net/mac80211/iface.c +@@ -21,7 +21,9 @@ + #include "sta_info.h" + #include "debugfs_netdev.h" + #include "mesh.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + #include "driver-ops.h" + #include "wme.h" + +@@ -189,7 +191,9 @@ static int ieee80211_open(struct net_dev + goto err_del_bss; + /* we're brought up, everything changes */ + hw_reconf_flags = ~0; ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_radio(local, true); ++#endif + } + + /* +--- a/net/mac80211/main.c ++++ b/net/mac80211/main.c +@@ -29,7 +29,9 @@ + #include "rate.h" + #include "mesh.h" + #include "wep.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + #include "cfg.h" + #include "debugfs.h" + +@@ -674,7 +676,9 @@ int ieee80211_register_hw(struct ieee802 + + rtnl_unlock(); + ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_init(local); ++#endif + + local->network_latency_notifier.notifier_call = + ieee80211_max_network_latency; +@@ -699,7 +703,9 @@ int ieee80211_register_hw(struct ieee802 + &local->network_latency_notifier); + rtnl_lock(); + fail_pm_qos: ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_exit(local); ++#endif + ieee80211_remove_interfaces(local); + fail_rate: + rtnl_unlock(); +@@ -755,7 +761,9 @@ void ieee80211_unregister_hw(struct ieee + destroy_workqueue(local->workqueue); + wiphy_unregister(local->hw.wiphy); + ieee80211_wep_free(local); ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_exit(local); ++#endif + kfree(local->int_scan_req); + } + EXPORT_SYMBOL(ieee80211_unregister_hw); +--- a/net/mac80211/mlme.c ++++ b/net/mac80211/mlme.c +@@ -26,7 +26,9 @@ + #include "ieee80211_i.h" + #include "driver-ops.h" + #include "rate.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + + #define IEEE80211_MAX_PROBE_TRIES 5 + +@@ -872,7 +874,9 @@ static void ieee80211_set_associated(str + */ + sdata->u.mgd.wmm_last_param_set = -1; + ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_assoc(local, 1); ++#endif + + if (local->hw.flags & IEEE80211_HW_NEED_DTIM_PERIOD) + bss_conf->dtim_period = bss->dtim_period; +@@ -958,7 +962,9 @@ static void ieee80211_set_disassoc(struc + + changed |= ieee80211_reset_erp_info(sdata); + ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_assoc(local, 0); ++#endif + changed |= BSS_CHANGED_ASSOC; + sdata->vif.bss_conf.assoc = false; + +--- a/net/mac80211/pm.c ++++ b/net/mac80211/pm.c +@@ -4,7 +4,9 @@ + #include "ieee80211_i.h" + #include "mesh.h" + #include "driver-ops.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + + int __ieee80211_suspend(struct ieee80211_hw *hw) + { +--- a/net/mac80211/rx.c ++++ b/net/mac80211/rx.c +@@ -21,7 +21,9 @@ + + #include "ieee80211_i.h" + #include "driver-ops.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + #include "mesh.h" + #include "wep.h" + #include "wpa.h" +@@ -1343,7 +1345,9 @@ ieee80211_rx_h_defragment(struct ieee802 + if (is_multicast_ether_addr(hdr->addr1)) + rx->local->dot11MulticastReceivedFrameCount++; + else ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_rx(rx->local); ++#endif + return RX_CONTINUE; + } + +--- a/net/mac80211/status.c ++++ b/net/mac80211/status.c +@@ -13,7 +13,9 @@ + #include "ieee80211_i.h" + #include "rate.h" + #include "mesh.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + + + void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw, +@@ -247,7 +249,9 @@ void ieee80211_tx_status(struct ieee8021 + + rcu_read_unlock(); + ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_tx(local, 0); ++#endif + + /* SNMP counters + * Fragments are passed to low-level drivers as separate skbs, so these +--- a/net/mac80211/tx.c ++++ b/net/mac80211/tx.c +@@ -26,7 +26,9 @@ + + #include "ieee80211_i.h" + #include "driver-ops.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + #include "mesh.h" + #include "wep.h" + #include "wpa.h" +@@ -1312,7 +1314,9 @@ static int __ieee80211_tx(struct ieee802 + } + + *skbp = skb = next; ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_tx(local, 1); ++#endif + fragm = true; + } + +--- a/net/mac80211/util.c ++++ b/net/mac80211/util.c +@@ -29,7 +29,9 @@ + #include "rate.h" + #include "mesh.h" + #include "wme.h" ++#ifdef CONFIG_MAC80211_LEDS + #include "led.h" ++#endif + #include "wep.h" + + /* privid for wiphys to determine whether they belong to us or not */ +@@ -1107,7 +1109,9 @@ u32 ieee80211_sta_get_rates(struct ieee8 + + void ieee80211_stop_device(struct ieee80211_local *local) + { ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_radio(local, false); ++#endif + + cancel_work_sync(&local->reconfig_filter); + +@@ -1141,7 +1145,9 @@ int ieee80211_reconfig(struct ieee80211_ + return res; + } + ++#ifdef CONFIG_MAC80211_LEDS + ieee80211_led_radio(local, true); ++#endif + } + + /* add interfaces */ |