diff options
author | Felix Fietkau <nbd@openwrt.org> | 2015-03-11 15:02:32 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2015-03-11 15:02:32 +0000 |
commit | 61cd5ce994701218a033578d2174e4791c146771 (patch) | |
tree | 3ada6c952c034b48f5ac6ad0f40d323660fcf742 /package/network/utils | |
parent | ff84193ba9f82f8e658fd6744d3753dd815d1f04 (diff) | |
download | master-187ad058-61cd5ce994701218a033578d2174e4791c146771.tar.gz master-187ad058-61cd5ce994701218a033578d2174e4791c146771.tar.bz2 master-187ad058-61cd5ce994701218a033578d2174e4791c146771.zip |
iw: update to 3.17
Patch by Bryan Forbes <bryan@reigndropsfall.net>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44654 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'package/network/utils')
-rw-r--r-- | package/network/utils/iw/Makefile | 4 | ||||
-rw-r--r-- | package/network/utils/iw/patches/001-nl80211_h_sync.patch | 872 | ||||
-rw-r--r-- | package/network/utils/iw/patches/010-dynack.patch | 94 | ||||
-rw-r--r-- | package/network/utils/iw/patches/200-reduce_size.patch | 10 |
4 files changed, 607 insertions, 373 deletions
diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 62a88e8e17..e6054950ca 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,12 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=3.15 +PKG_VERSION:=3.17 PKG_RELEASE:=1 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz PKG_SOURCE_URL:=https://www.kernel.org/pub/software/network/iw -PKG_MD5SUM:=3b77ad7ec44a865a3bb2ab6c1c463bba +PKG_MD5SUM:=69c4a2f29cf560247febc6cad7161a72 PKG_MAINTAINER:=Felix Fietkau <nbd@openwrt.org> PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 64e33054ec..03a3d38c66 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,344 +1,672 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -503,6 +503,9 @@ - * TX status event pertaining to the TX request. - * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the - * management frames at CCK rate or not in 2GHz band. -+ * %NL80211_ATTR_CSA_C_OFFSETS_TX is an array of offsets to CSA -+ * counters which will be updated to the current value. This attribute -+ * is used during CSA period. - * @NL80211_CMD_FRAME_WAIT_CANCEL: When an off-channel TX was requested, this - * command may be used with the corresponding cookie to cancel the wait - * time if it is known that it is no longer necessary. -@@ -719,6 +722,22 @@ - * QoS mapping is relevant for IP packets, it is only valid during an - * association. This is cleared on disassociation and AP restart. +@@ -25,10 +25,30 @@ * -+ * @NL80211_CMD_ADD_TX_TS: Ask the kernel to add a traffic stream for the given -+ * %NL80211_ATTR_TSID and %NL80211_ATTR_MAC with %NL80211_ATTR_USER_PRIO -+ * and %NL80211_ATTR_ADMITTED_TIME parameters. -+ * Note that the action frame handshake with the AP shall be handled by -+ * userspace via the normal management RX/TX framework, this only sets -+ * up the TX TS in the driver/device. -+ * If the admitted time attribute is not added then the request just checks -+ * if a subsequent setup could be successful, the intent is to use this to -+ * avoid setting up a session with the AP when local restrictions would -+ * make that impossible. However, the subsequent "real" setup may still -+ * fail even if the check was successful. -+ * @NL80211_CMD_DEL_TX_TS: Remove an existing TS with the %NL80211_ATTR_TSID -+ * and %NL80211_ATTR_MAC parameters. It isn't necessary to call this -+ * before removing a station entry entirely, or before disassociating -+ * or similar, cleanup will happen in the driver/device in this case. + */ + ++/* ++ * This header file defines the userspace API to the wireless stack. Please ++ * be careful not to break things - i.e. don't move anything around or so ++ * unless you can demonstrate that it breaks neither API nor ABI. ++ * ++ * Additions to the API should be accompanied by actual implementations in ++ * an upstream driver, so that example implementations exist in case there ++ * are ever concerns about the precise semantics of the API or changes are ++ * needed, and to ensure that code for dead (no longer implemented) API ++ * can actually be identified and removed. ++ * Nonetheless, semantics should also be documented carefully in this file. ++ */ ++ + #include <linux/types.h> + + #define NL80211_GENL_NAME "nl80211" + ++#define NL80211_MULTICAST_GROUP_CONFIG "config" ++#define NL80211_MULTICAST_GROUP_SCAN "scan" ++#define NL80211_MULTICAST_GROUP_REG "regulatory" ++#define NL80211_MULTICAST_GROUP_MLME "mlme" ++#define NL80211_MULTICAST_GROUP_VENDOR "vendor" ++#define NL80211_MULTICAST_GROUP_TESTMODE "testmode" ++ + /** + * DOC: Station handling + * +@@ -173,8 +193,8 @@ + * %NL80211_ATTR_WIPHY and %NL80211_ATTR_WIPHY_NAME. + * + * @NL80211_CMD_GET_INTERFACE: Request an interface's configuration; +- * either a dump request on a %NL80211_ATTR_WIPHY or a specific get +- * on an %NL80211_ATTR_IFINDEX is supported. ++ * either a dump request for all interfaces or a specific get with a ++ * single %NL80211_ATTR_IFINDEX is supported. + * @NL80211_CMD_SET_INTERFACE: Set type of a virtual interface, requires + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_IFTYPE. + * @NL80211_CMD_NEW_INTERFACE: Newly created virtual interface or response +@@ -227,7 +247,11 @@ + * the interface identified by %NL80211_ATTR_IFINDEX. + * @NL80211_CMD_DEL_STATION: Remove a station identified by %NL80211_ATTR_MAC + * or, if no MAC address given, all stations, on the interface identified +- * by %NL80211_ATTR_IFINDEX. ++ * by %NL80211_ATTR_IFINDEX. %NL80211_ATTR_MGMT_SUBTYPE and ++ * %NL80211_ATTR_REASON_CODE can optionally be used to specify which type ++ * of disconnection indication should be sent to the station ++ * (Deauthentication or Disassociation frame and reason code for that ++ * frame). + * + * @NL80211_CMD_GET_MPATH: Get mesh path attributes for mesh path to + * destination %NL80211_ATTR_MAC on the interface identified by +@@ -248,7 +272,18 @@ + * %NL80211_ATTR_IFINDEX. + * + * @NL80211_CMD_GET_REG: ask the wireless core to send us its currently set +- * regulatory domain. ++ * regulatory domain. If %NL80211_ATTR_WIPHY is specified and the device ++ * has a private regulatory domain, it will be returned. Otherwise, the ++ * global regdomain will be returned. ++ * A device will have a private regulatory domain if it uses the ++ * regulatory_hint() API. Even when a private regdomain is used the channel ++ * information will still be mended according to further hints from ++ * the regulatory core to help with compliance. A dump version of this API ++ * is now available which will returns the global regdomain as well as ++ * all private regdomains of present wiphys (for those that have it). ++ * If a wiphy is self-managed (%NL80211_ATTR_WIPHY_SELF_MANAGED_REG), then ++ * its private regdomain is the only valid one for it. The regulatory ++ * core is not used to help with compliance in this case. + * @NL80211_CMD_SET_REG: Set current regulatory domain. CRDA sends this command + * after being queried by the kernel. CRDA replies by sending a regulatory + * domain structure which consists of %NL80211_ATTR_REG_ALPHA set to our +@@ -302,7 +337,9 @@ + * if passed, define which channels should be scanned; if not + * passed, all channels allowed for the current regulatory domain + * are used. Extra IEs can also be passed from the userspace by +- * using the %NL80211_ATTR_IE attribute. ++ * using the %NL80211_ATTR_IE attribute. The first cycle of the ++ * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY ++ * is supplied. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. +@@ -639,7 +676,18 @@ + * @NL80211_CMD_CH_SWITCH_NOTIFY: An AP or GO may decide to switch channels + * independently of the userspace SME, send this event indicating + * %NL80211_ATTR_IFINDEX is now on %NL80211_ATTR_WIPHY_FREQ and the +- * attributes determining channel width. ++ * attributes determining channel width. This indication may also be ++ * sent when a remotely-initiated switch (e.g., when a STA receives a CSA ++ * from the remote AP) is completed; ++ * ++ * @NL80211_CMD_CH_SWITCH_STARTED_NOTIFY: Notify that a channel switch ++ * has been started on an interface, regardless of the initiator ++ * (ie. whether it was requested from a remote device or ++ * initiated on our own). It indicates that ++ * %NL80211_ATTR_IFINDEX will be on %NL80211_ATTR_WIPHY_FREQ ++ * after %NL80211_ATTR_CH_SWITCH_COUNT TBTT's. The userspace may ++ * decide to react to this indication by requesting other ++ * interfaces to change channel as well. + * + * @NL80211_CMD_START_P2P_DEVICE: Start the given P2P Device, identified by + * its %NL80211_ATTR_WDEV identifier. It must have been created with +@@ -738,6 +786,31 @@ + * before removing a station entry entirely, or before disassociating + * or similar, cleanup will happen in the driver/device in this case. + * ++ * @NL80211_CMD_GET_MPP: Get mesh path attributes for mesh proxy path to ++ * destination %NL80211_ATTR_MAC on the interface identified by ++ * %NL80211_ATTR_IFINDEX. ++ * ++ * @NL80211_CMD_JOIN_OCB: Join the OCB network. The center frequency and ++ * bandwidth of a channel must be given. ++ * @NL80211_CMD_LEAVE_OCB: Leave the OCB network -- no special arguments, the ++ * network is determined by the network interface. ++ * ++ * @NL80211_CMD_TDLS_CHANNEL_SWITCH: Start channel-switching with a TDLS peer, ++ * identified by the %NL80211_ATTR_MAC parameter. A target channel is ++ * provided via %NL80211_ATTR_WIPHY_FREQ and other attributes determining ++ * channel width/type. The target operating class is given via ++ * %NL80211_ATTR_OPER_CLASS. ++ * The driver is responsible for continually initiating channel-switching ++ * operations and returning to the base channel for communication with the ++ * AP. ++ * @NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH: Stop channel-switching with a TDLS ++ * peer given by %NL80211_ATTR_MAC. Both peers must be on the base channel ++ * when this command completes. ++ * ++ * @NL80211_CMD_WIPHY_REG_CHANGE: Similar to %NL80211_CMD_REG_CHANGE, but used ++ * as an event to indicate changes for devices with wiphy-specific regdom ++ * management. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ -@@ -890,6 +909,9 @@ enum nl80211_commands { +@@ -912,6 +985,18 @@ enum nl80211_commands { + NL80211_CMD_ADD_TX_TS, + NL80211_CMD_DEL_TX_TS, - NL80211_CMD_SET_QOS_MAP, - -+ NL80211_CMD_ADD_TX_TS, -+ NL80211_CMD_DEL_TX_TS, ++ NL80211_CMD_GET_MPP, ++ ++ NL80211_CMD_JOIN_OCB, ++ NL80211_CMD_LEAVE_OCB, ++ ++ NL80211_CMD_CH_SWITCH_STARTED_NOTIFY, ++ ++ NL80211_CMD_TDLS_CHANNEL_SWITCH, ++ NL80211_CMD_TDLS_CANCEL_CHANNEL_SWITCH, ++ ++ NL80211_CMD_WIPHY_REG_CHANGE, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -@@ -1525,10 +1547,10 @@ enum nl80211_commands { - * operation). - * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information - * for the time while performing a channel switch. -- * @NL80211_ATTR_CSA_C_OFF_BEACON: Offset of the channel switch counter -- * field in the beacons tail (%NL80211_ATTR_BEACON_TAIL). -- * @NL80211_ATTR_CSA_C_OFF_PRESP: Offset of the channel switch counter -- * field in the probe response (%NL80211_ATTR_PROBE_RESP). -+ * @NL80211_ATTR_CSA_C_OFF_BEACON: An array of offsets (u16) to the channel -+ * switch counters in the beacons tail (%NL80211_ATTR_BEACON_TAIL). -+ * @NL80211_ATTR_CSA_C_OFF_PRESP: An array of offsets (u16) to the channel -+ * switch counters in the probe response (%NL80211_ATTR_PROBE_RESP). - * - * @NL80211_ATTR_RXMGMT_FLAGS: flags for nl80211_send_mgmt(), u32. - * As specified in the &enum nl80211_rxmgmt_flags. -@@ -1576,9 +1598,49 @@ enum nl80211_commands { - * advertise values that cannot always be met. In such cases, an attempt - * to add a new station entry with @NL80211_CMD_NEW_STATION may fail. - * -+ * @NL80211_ATTR_CSA_C_OFFSETS_TX: An array of csa counter offsets (u16) which -+ * should be updated when the frame is transmitted. -+ * @NL80211_ATTR_MAX_CSA_COUNTERS: U8 attribute used to advertise the maximum -+ * supported number of csa counters. -+ * +@@ -1606,9 +1691,16 @@ enum nl80211_commands { * @NL80211_ATTR_TDLS_PEER_CAPABILITY: flags for TDLS peer capabilities, u32. * As specified in the &enum nl80211_tdls_peer_capability. * -+ * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface -+ * creation then the new interface will be owned by the netlink socket -+ * that created it and will be destroyed when the socket is closed +- * @NL80211_ATTR_IFACE_SOCKET_OWNER: flag attribute, if set during interface ++ * @NL80211_ATTR_SOCKET_OWNER: Flag attribute, if set during interface + * creation then the new interface will be owned by the netlink socket +- * that created it and will be destroyed when the socket is closed ++ * that created it and will be destroyed when the socket is closed. ++ * If set during scheduled scan start then the new scan req will be ++ * owned by the netlink socket that created it and the scheduled scan will ++ * be stopped when the socket is closed. ++ * If set during configuration of regulatory indoor operation then the ++ * regulatory indoor configuration would be owned by the netlink socket ++ * that configured the indoor setting, and the indoor operation would be ++ * cleared when the socket is closed. + * + * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is + * the TDLS link initiator. +@@ -1638,6 +1730,40 @@ enum nl80211_commands { + * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see + * &enum nl80211_smps_mode. + * ++ * @NL80211_ATTR_OPER_CLASS: operating class + * -+ * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is -+ * the TDLS link initiator. ++ * @NL80211_ATTR_MAC_MASK: MAC address mask + * -+ * @NL80211_ATTR_USE_RRM: flag for indicating whether the current connection -+ * shall support Radio Resource Measurements (11k). This attribute can be -+ * used with %NL80211_CMD_ASSOCIATE and %NL80211_CMD_CONNECT requests. -+ * User space applications are expected to use this flag only if the -+ * underlying device supports these minimal RRM features: -+ * %NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES, -+ * %NL80211_FEATURE_QUIET, -+ * If this flag is used, driver must add the Power Capabilities IE to the -+ * association request. In addition, it must also set the RRM capability -+ * flag in the association request's Capability Info field. ++ * @NL80211_ATTR_WIPHY_SELF_MANAGED_REG: flag attribute indicating this device ++ * is self-managing its regulatory information and any regulatory domain ++ * obtained from it is coming from the device's wiphy and not the global ++ * cfg80211 regdomain. + * -+ * @NL80211_ATTR_WIPHY_DYN_ACK: flag attribute used to enable ACK timeout -+ * estimation algorithm (dynack). In order to activate dynack -+ * %NL80211_FEATURE_ACKTO_ESTIMATION feature flag must be set by lower -+ * drivers to indicate dynack capability. Dynack is automatically disabled -+ * setting valid value for coverage class. ++ * @NL80211_ATTR_EXT_FEATURES: extended feature flags contained in a byte ++ * array. The feature flags are identified by their bit index (see &enum ++ * nl80211_ext_feature_index). The bit index is ordered starting at the ++ * least-significant bit of the first byte in the array, ie. bit index 0 ++ * is located at bit 0 of byte 0. bit index 25 would be located at bit 1 ++ * of byte 3 (u8 array). + * -+ * @NL80211_ATTR_TSID: a TSID value (u8 attribute) -+ * @NL80211_ATTR_USER_PRIO: user priority value (u8 attribute) -+ * @NL80211_ATTR_ADMITTED_TIME: admitted time in units of 32 microseconds -+ * (per second) (u16 attribute) ++ * @NL80211_ATTR_SURVEY_RADIO_STATS: Request overall radio statistics to be ++ * returned along with other survey data. If set, @NL80211_CMD_GET_SURVEY ++ * may return a survey entry without a channel indicating global radio ++ * statistics (only some values are valid and make sense.) ++ * For devices that don't return such an entry even then, the information ++ * should be contained in the result as the sum of the respective counters ++ * over all channels. + * -+ * @NL80211_ATTR_SMPS_MODE: SMPS mode to use (ap mode). see -+ * &enum nl80211_smps_mode. ++ * @NL80211_ATTR_SCHED_SCAN_DELAY: delay before a scheduled scan (or a ++ * WoWLAN net-detect scan) is started, u32 in seconds. ++ ++ * @NL80211_ATTR_REG_INDOOR: flag attribute, if set indicates that the device ++ * is operating in an indoor environment. + * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. + * ++ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use */ -@@ -1914,6 +1976,25 @@ enum nl80211_attrs { +@@ -1973,7 +2099,7 @@ enum nl80211_attrs { NL80211_ATTR_TDLS_PEER_CAPABILITY, -+ NL80211_ATTR_IFACE_SOCKET_OWNER, +- NL80211_ATTR_IFACE_SOCKET_OWNER, ++ NL80211_ATTR_SOCKET_OWNER, + + NL80211_ATTR_CSA_C_OFFSETS_TX, + NL80211_ATTR_MAX_CSA_COUNTERS, +@@ -1990,15 +2116,35 @@ enum nl80211_attrs { + + NL80211_ATTR_SMPS_MODE, + ++ NL80211_ATTR_OPER_CLASS, ++ ++ NL80211_ATTR_MAC_MASK, + -+ NL80211_ATTR_CSA_C_OFFSETS_TX, -+ NL80211_ATTR_MAX_CSA_COUNTERS, ++ NL80211_ATTR_WIPHY_SELF_MANAGED_REG, + -+ NL80211_ATTR_TDLS_INITIATOR, ++ NL80211_ATTR_EXT_FEATURES, + -+ NL80211_ATTR_USE_RRM, ++ NL80211_ATTR_SURVEY_RADIO_STATS, + -+ NL80211_ATTR_WIPHY_DYN_ACK, ++ NL80211_ATTR_NETNS_FD, + -+ NL80211_ATTR_TSID, -+ NL80211_ATTR_USER_PRIO, -+ NL80211_ATTR_ADMITTED_TIME, ++ NL80211_ATTR_SCHED_SCAN_DELAY, + -+ NL80211_ATTR_SMPS_MODE, ++ NL80211_ATTR_REG_INDOOR, + + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -2182,6 +2263,8 @@ enum nl80211_sta_bss_param { - * Contains a nested array of signal strength attributes (u8, dBm) - * @NL80211_STA_INFO_CHAIN_SIGNAL_AVG: per-chain signal strength average ++ NUM_NL80211_ATTR = __NL80211_ATTR_AFTER_LAST, + NL80211_ATTR_MAX = __NL80211_ATTR_AFTER_LAST - 1 + }; + + /* source-level API compatibility */ + #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION + #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG ++#define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER + + /* + * Allow user space programs to use #ifdef on new attributes by defining them +@@ -2028,7 +2174,7 @@ enum nl80211_attrs { + + #define NL80211_MAX_SUPP_RATES 32 + #define NL80211_MAX_SUPP_HT_RATES 77 +-#define NL80211_MAX_SUPP_REG_RULES 32 ++#define NL80211_MAX_SUPP_REG_RULES 64 + #define NL80211_TKIP_DATA_OFFSET_ENCR_KEY 0 + #define NL80211_TKIP_DATA_OFFSET_TX_MIC_KEY 16 + #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY 24 +@@ -2064,6 +2210,8 @@ enum nl80211_attrs { + * and therefore can't be created in the normal ways, use the + * %NL80211_CMD_START_P2P_DEVICE and %NL80211_CMD_STOP_P2P_DEVICE + * commands to create and destroy one ++ * @NL80211_IF_TYPE_OCB: Outside Context of a BSS ++ * This mode corresponds to the MIB variable dot11OCBActivated=true + * @NL80211_IFTYPE_MAX: highest interface type number currently defined + * @NUM_NL80211_IFTYPES: number of defined interface types + * +@@ -2083,6 +2231,7 @@ enum nl80211_iftype { + NL80211_IFTYPE_P2P_CLIENT, + NL80211_IFTYPE_P2P_GO, + NL80211_IFTYPE_P2P_DEVICE, ++ NL80211_IFTYPE_OCB, + + /* keep last */ + NUM_NL80211_IFTYPES, +@@ -2165,8 +2314,15 @@ struct nl80211_sta_flag_update { + * @NL80211_RATE_INFO_VHT_MCS: MCS index for VHT (u8) + * @NL80211_RATE_INFO_VHT_NSS: number of streams in VHT (u8) + * @NL80211_RATE_INFO_80_MHZ_WIDTH: 80 MHz VHT rate +- * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: 80+80 MHz VHT rate ++ * @NL80211_RATE_INFO_80P80_MHZ_WIDTH: unused - 80+80 is treated the ++ * same as 160 for purposes of the bitrates + * @NL80211_RATE_INFO_160_MHZ_WIDTH: 160 MHz VHT rate ++ * @NL80211_RATE_INFO_10_MHZ_WIDTH: 10 MHz width - note that this is ++ * a legacy rate and will be reported as the actual bitrate, i.e. ++ * half the base (20 MHz) rate ++ * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is ++ * a legacy rate and will be reported as the actual bitrate, i.e. ++ * a quarter of the base (20 MHz) rate + * @__NL80211_RATE_INFO_AFTER_LAST: internal use + */ + enum nl80211_rate_info { +@@ -2181,6 +2337,8 @@ enum nl80211_rate_info { + NL80211_RATE_INFO_80_MHZ_WIDTH, + NL80211_RATE_INFO_80P80_MHZ_WIDTH, + NL80211_RATE_INFO_160_MHZ_WIDTH, ++ NL80211_RATE_INFO_10_MHZ_WIDTH, ++ NL80211_RATE_INFO_5_MHZ_WIDTH, + + /* keep last */ + __NL80211_RATE_INFO_AFTER_LAST, +@@ -2225,18 +2383,24 @@ enum nl80211_sta_bss_param { + * + * @__NL80211_STA_INFO_INVALID: attribute number 0 is reserved + * @NL80211_STA_INFO_INACTIVE_TIME: time since last activity (u32, msecs) +- * @NL80211_STA_INFO_RX_BYTES: total received bytes (u32, from this station) +- * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (u32, to this station) +- * @NL80211_STA_INFO_RX_BYTES64: total received bytes (u64, from this station) +- * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (u64, to this station) ++ * @NL80211_STA_INFO_RX_BYTES: total received bytes (MPDU length) ++ * (u32, from this station) ++ * @NL80211_STA_INFO_TX_BYTES: total transmitted bytes (MPDU length) ++ * (u32, to this station) ++ * @NL80211_STA_INFO_RX_BYTES64: total received bytes (MPDU length) ++ * (u64, from this station) ++ * @NL80211_STA_INFO_TX_BYTES64: total transmitted bytes (MPDU length) ++ * (u64, to this station) + * @NL80211_STA_INFO_SIGNAL: signal strength of last received PPDU (u8, dBm) + * @NL80211_STA_INFO_TX_BITRATE: current unicast tx rate, nested attribute + * containing info as possible, see &enum nl80211_rate_info +- * @NL80211_STA_INFO_RX_PACKETS: total received packet (u32, from this station) +- * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (u32, to this +- * station) +- * @NL80211_STA_INFO_TX_RETRIES: total retries (u32, to this station) +- * @NL80211_STA_INFO_TX_FAILED: total failed packets (u32, to this station) ++ * @NL80211_STA_INFO_RX_PACKETS: total received packet (MSDUs and MMPDUs) ++ * (u32, from this station) ++ * @NL80211_STA_INFO_TX_PACKETS: total transmitted packets (MSDUs and MMPDUs) ++ * (u32, to this station) ++ * @NL80211_STA_INFO_TX_RETRIES: total retries (MPDUs) (u32, to this station) ++ * @NL80211_STA_INFO_TX_FAILED: total failed packets (MPDUs) ++ * (u32, to this station) + * @NL80211_STA_INFO_SIGNAL_AVG: signal strength average (u8, dBm) + * @NL80211_STA_INFO_LLID: the station's mesh LLID + * @NL80211_STA_INFO_PLID: the station's mesh PLID +@@ -2260,6 +2424,16 @@ enum nl80211_sta_bss_param { * Same format as NL80211_STA_INFO_CHAIN_SIGNAL. -+ * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the -+ * 802.11 header (u32, kbps) + * @NL80211_STA_EXPECTED_THROUGHPUT: expected throughput considering also the + * 802.11 header (u32, kbps) ++ * @NL80211_STA_INFO_RX_DROP_MISC: RX packets dropped for unspecified reasons ++ * (u64) ++ * @NL80211_STA_INFO_BEACON_RX: number of beacons received from this peer (u64) ++ * @NL80211_STA_INFO_BEACON_SIGNAL_AVG: signal strength average ++ * for beacons only (u8, dBm) ++ * @NL80211_STA_INFO_TID_STATS: per-TID statistics (see &enum nl80211_tid_stats) ++ * This is a nested attribute where each the inner attribute number is the ++ * TID+1 and the special TID 16 (i.e. value 17) is used for non-QoS frames; ++ * each one of those is again nested with &enum nl80211_tid_stats ++ * attributes carrying the actual values. * @__NL80211_STA_INFO_AFTER_LAST: internal * @NL80211_STA_INFO_MAX: highest possible station info attribute */ -@@ -2213,6 +2296,7 @@ enum nl80211_sta_info { - NL80211_STA_INFO_TX_BYTES64, +@@ -2292,6 +2466,10 @@ enum nl80211_sta_info { NL80211_STA_INFO_CHAIN_SIGNAL, NL80211_STA_INFO_CHAIN_SIGNAL_AVG, -+ NL80211_STA_INFO_EXPECTED_THROUGHPUT, + NL80211_STA_INFO_EXPECTED_THROUGHPUT, ++ NL80211_STA_INFO_RX_DROP_MISC, ++ NL80211_STA_INFO_BEACON_RX, ++ NL80211_STA_INFO_BEACON_SIGNAL_AVG, ++ NL80211_STA_INFO_TID_STATS, /* keep last */ __NL80211_STA_INFO_AFTER_LAST, -@@ -2336,9 +2420,34 @@ enum nl80211_band_attr { - * using this channel as the primary or any of the secondary channels - * isn't possible - * @NL80211_FREQUENCY_ATTR_DFS_CAC_TIME: DFS CAC time in milliseconds. -+ * @NL80211_FREQUENCY_ATTR_INDOOR_ONLY: Only indoor use is permitted on this -+ * channel. A channel that has the INDOOR_ONLY attribute can only be -+ * used when there is a clear assessment that the device is operating in -+ * an indoor surroundings, i.e., it is connected to AC power (and not -+ * through portable DC inverters) or is under the control of a master -+ * that is acting as an AP and is connected to AC power. -+ * @NL80211_FREQUENCY_ATTR_GO_CONCURRENT: GO operation is allowed on this -+ * channel if it's connected concurrently to a BSS on the same channel on -+ * the 2 GHz band or to a channel in the same UNII band (on the 5 GHz -+ * band), and IEEE80211_CHAN_RADAR is not set. Instantiating a GO on a -+ * channel that has the GO_CONCURRENT attribute set can be done when there -+ * is a clear assessment that the device is operating under the guidance of -+ * an authorized master, i.e., setting up a GO while the device is also -+ * connected to an AP with DFS and radar detection on the UNII band (it is -+ * up to user-space, i.e., wpa_supplicant to perform the required -+ * verifications) -+ * @NL80211_FREQUENCY_ATTR_NO_20MHZ: 20 MHz operation is not allowed -+ * on this channel in current regulatory domain. -+ * @NL80211_FREQUENCY_ATTR_NO_10MHZ: 10 MHz operation is not allowed -+ * on this channel in current regulatory domain. - * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number - * currently defined - * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use -+ * -+ * See https://apps.fcc.gov/eas/comments/GetPublishedDocument.html?id=327&tn=528122 -+ * for more information on the FCC description of the relaxations allowed -+ * by NL80211_FREQUENCY_ATTR_INDOOR_ONLY and -+ * NL80211_FREQUENCY_ATTR_GO_CONCURRENT. +@@ -2299,6 +2477,31 @@ enum nl80211_sta_info { + }; + + /** ++ * enum nl80211_tid_stats - per TID statistics attributes ++ * @__NL80211_TID_STATS_INVALID: attribute number 0 is reserved ++ * @NL80211_TID_STATS_RX_MSDU: number of MSDUs received (u64) ++ * @NL80211_TID_STATS_TX_MSDU: number of MSDUs transmitted (or ++ * attempted to transmit; u64) ++ * @NL80211_TID_STATS_TX_MSDU_RETRIES: number of retries for ++ * transmitted MSDUs (not counting the first attempt; u64) ++ * @NL80211_TID_STATS_TX_MSDU_FAILED: number of failed transmitted ++ * MSDUs (u64) ++ * @NUM_NL80211_TID_STATS: number of attributes here ++ * @NL80211_TID_STATS_MAX: highest numbered attribute here ++ */ ++enum nl80211_tid_stats { ++ __NL80211_TID_STATS_INVALID, ++ NL80211_TID_STATS_RX_MSDU, ++ NL80211_TID_STATS_TX_MSDU, ++ NL80211_TID_STATS_TX_MSDU_RETRIES, ++ NL80211_TID_STATS_TX_MSDU_FAILED, ++ ++ /* keep last */ ++ NUM_NL80211_TID_STATS, ++ NL80211_TID_STATS_MAX = NUM_NL80211_TID_STATS - 1 ++}; ++ ++/** + * enum nl80211_mpath_flags - nl80211 mesh path flags + * + * @NL80211_MPATH_FLAG_ACTIVE: the mesh path is active +@@ -2631,6 +2834,11 @@ enum nl80211_sched_scan_match_attr { + * @NL80211_RRF_AUTO_BW: maximum available bandwidth should be calculated + * base on contiguous rules and wider channels will be allowed to cross + * multiple contiguous/overlapping frequency ranges. ++ * @NL80211_RRF_GO_CONCURRENT: See &NL80211_FREQUENCY_ATTR_GO_CONCURRENT ++ * @NL80211_RRF_NO_HT40MINUS: channels can't be used in HT40- operation ++ * @NL80211_RRF_NO_HT40PLUS: channels can't be used in HT40+ operation ++ * @NL80211_RRF_NO_80MHZ: 80MHz operation not allowed ++ * @NL80211_RRF_NO_160MHZ: 160MHz operation not allowed */ - enum nl80211_frequency_attr { - __NL80211_FREQUENCY_ATTR_INVALID, -@@ -2355,6 +2464,10 @@ enum nl80211_frequency_attr { - NL80211_FREQUENCY_ATTR_NO_80MHZ, - NL80211_FREQUENCY_ATTR_NO_160MHZ, - NL80211_FREQUENCY_ATTR_DFS_CAC_TIME, -+ NL80211_FREQUENCY_ATTR_INDOOR_ONLY, -+ NL80211_FREQUENCY_ATTR_GO_CONCURRENT, -+ NL80211_FREQUENCY_ATTR_NO_20MHZ, -+ NL80211_FREQUENCY_ATTR_NO_10MHZ, + enum nl80211_reg_rule_flags { + NL80211_RRF_NO_OFDM = 1<<0, +@@ -2643,11 +2851,18 @@ enum nl80211_reg_rule_flags { + NL80211_RRF_NO_IR = 1<<7, + __NL80211_RRF_NO_IBSS = 1<<8, + NL80211_RRF_AUTO_BW = 1<<11, ++ NL80211_RRF_GO_CONCURRENT = 1<<12, ++ NL80211_RRF_NO_HT40MINUS = 1<<13, ++ NL80211_RRF_NO_HT40PLUS = 1<<14, ++ NL80211_RRF_NO_80MHZ = 1<<15, ++ NL80211_RRF_NO_160MHZ = 1<<16, + }; + + #define NL80211_RRF_PASSIVE_SCAN NL80211_RRF_NO_IR + #define NL80211_RRF_NO_IBSS NL80211_RRF_NO_IR + #define NL80211_RRF_NO_IR NL80211_RRF_NO_IR ++#define NL80211_RRF_NO_HT40 (NL80211_RRF_NO_HT40MINUS |\ ++ NL80211_RRF_NO_HT40PLUS) + + /* For backport compatibility with older userspace */ + #define NL80211_RRF_NO_IR_ALL (NL80211_RRF_NO_IR | __NL80211_RRF_NO_IBSS) +@@ -2700,16 +2915,18 @@ enum nl80211_user_reg_hint_type { + * @NL80211_SURVEY_INFO_FREQUENCY: center frequency of channel + * @NL80211_SURVEY_INFO_NOISE: noise level of channel (u8, dBm) + * @NL80211_SURVEY_INFO_IN_USE: channel is currently being used +- * @NL80211_SURVEY_INFO_CHANNEL_TIME: amount of time (in ms) that the radio +- * spent on this channel +- * @NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY: amount of the time the primary ++ * @NL80211_SURVEY_INFO_TIME: amount of time (in ms) that the radio ++ * was turned on (on channel or globally) ++ * @NL80211_SURVEY_INFO_TIME_BUSY: amount of the time the primary + * channel was sensed busy (either due to activity or energy detect) +- * @NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY: amount of time the extension ++ * @NL80211_SURVEY_INFO_TIME_EXT_BUSY: amount of time the extension + * channel was sensed busy +- * @NL80211_SURVEY_INFO_CHANNEL_TIME_RX: amount of time the radio spent +- * receiving data +- * @NL80211_SURVEY_INFO_CHANNEL_TIME_TX: amount of time the radio spent +- * transmitting data ++ * @NL80211_SURVEY_INFO_TIME_RX: amount of time the radio spent ++ * receiving data (on channel or globally) ++ * @NL80211_SURVEY_INFO_TIME_TX: amount of time the radio spent ++ * transmitting data (on channel or globally) ++ * @NL80211_SURVEY_INFO_TIME_SCAN: time the radio spent for scan ++ * (on this channel or globally) + * @NL80211_SURVEY_INFO_MAX: highest survey info attribute number + * currently defined + * @__NL80211_SURVEY_INFO_AFTER_LAST: internal use +@@ -2719,17 +2936,25 @@ enum nl80211_survey_info { + NL80211_SURVEY_INFO_FREQUENCY, + NL80211_SURVEY_INFO_NOISE, + NL80211_SURVEY_INFO_IN_USE, +- NL80211_SURVEY_INFO_CHANNEL_TIME, +- NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY, +- NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY, +- NL80211_SURVEY_INFO_CHANNEL_TIME_RX, +- NL80211_SURVEY_INFO_CHANNEL_TIME_TX, ++ NL80211_SURVEY_INFO_TIME, ++ NL80211_SURVEY_INFO_TIME_BUSY, ++ NL80211_SURVEY_INFO_TIME_EXT_BUSY, ++ NL80211_SURVEY_INFO_TIME_RX, ++ NL80211_SURVEY_INFO_TIME_TX, ++ NL80211_SURVEY_INFO_TIME_SCAN, /* keep last */ - __NL80211_FREQUENCY_ATTR_AFTER_LAST, -@@ -2573,10 +2686,13 @@ enum nl80211_dfs_regions { - * present has been registered with the wireless core that - * has listed NL80211_FEATURE_CELL_BASE_REG_HINTS as a - * supported feature. -+ * @NL80211_USER_REG_HINT_INDOOR: a user sent an hint indicating that the -+ * platform is operating in an indoor environment. - */ - enum nl80211_user_reg_hint_type { - NL80211_USER_REG_HINT_USER = 0, - NL80211_USER_REG_HINT_CELL_BASE = 1, -+ NL80211_USER_REG_HINT_INDOOR = 2, + __NL80211_SURVEY_INFO_AFTER_LAST, + NL80211_SURVEY_INFO_MAX = __NL80211_SURVEY_INFO_AFTER_LAST - 1 }; ++/* keep old names for compatibility */ ++#define NL80211_SURVEY_INFO_CHANNEL_TIME NL80211_SURVEY_INFO_TIME ++#define NL80211_SURVEY_INFO_CHANNEL_TIME_BUSY NL80211_SURVEY_INFO_TIME_BUSY ++#define NL80211_SURVEY_INFO_CHANNEL_TIME_EXT_BUSY NL80211_SURVEY_INFO_TIME_EXT_BUSY ++#define NL80211_SURVEY_INFO_CHANNEL_TIME_RX NL80211_SURVEY_INFO_TIME_RX ++#define NL80211_SURVEY_INFO_CHANNEL_TIME_TX NL80211_SURVEY_INFO_TIME_TX ++ + /** + * enum nl80211_mntr_flags - monitor configuration flags + * +@@ -2894,7 +3119,8 @@ enum nl80211_mesh_power_mode { + * + * @NL80211_MESHCONF_PLINK_TIMEOUT: If no tx activity is seen from a STA we've + * established peering with for longer than this time (in seconds), then +- * remove it from the STA's list of peers. Default is 30 minutes. ++ * remove it from the STA's list of peers. You may set this to 0 to disable ++ * the removal of the STA. Default is 30 minutes. + * + * @__NL80211_MESHCONF_ATTR_AFTER_LAST: internal use + */ +@@ -3166,6 +3392,9 @@ enum nl80211_bss { /** -@@ -2998,14 +3114,20 @@ enum nl80211_bss_scan_width { - * @NL80211_BSS_BSSID: BSSID of the BSS (6 octets) - * @NL80211_BSS_FREQUENCY: frequency in MHz (u32) - * @NL80211_BSS_TSF: TSF of the received probe response/beacon (u64) -+ * (if @NL80211_BSS_PRESP_DATA is present then this is known to be -+ * from a probe response, otherwise it may be from the same beacon -+ * that the NL80211_BSS_BEACON_TSF will be from) - * @NL80211_BSS_BEACON_INTERVAL: beacon interval of the (I)BSS (u16) - * @NL80211_BSS_CAPABILITY: capability field (CPU order, u16) - * @NL80211_BSS_INFORMATION_ELEMENTS: binary attribute containing the - * raw information elements from the probe response/beacon (bin); -- * if the %NL80211_BSS_BEACON_IES attribute is present, the IEs here are -- * from a Probe Response frame; otherwise they are from a Beacon frame. -+ * if the %NL80211_BSS_BEACON_IES attribute is present and the data is -+ * different then the IEs here are from a Probe Response frame; otherwise -+ * they are from a Beacon frame. - * However, if the driver does not indicate the source of the IEs, these - * IEs may be from either frame subtype. -+ * If present, the @NL80211_BSS_PRESP_DATA attribute indicates that the -+ * data here is known to be from a probe response, without any heuristics. - * @NL80211_BSS_SIGNAL_MBM: signal strength of probe response/beacon - * in mBm (100 * dBm) (s32) - * @NL80211_BSS_SIGNAL_UNSPEC: signal strength of the probe response/beacon -@@ -3017,6 +3139,10 @@ enum nl80211_bss_scan_width { - * yet been received - * @NL80211_BSS_CHAN_WIDTH: channel width of the control channel - * (u32, enum nl80211_bss_scan_width) -+ * @NL80211_BSS_BEACON_TSF: TSF of the last received beacon (u64) -+ * (not present if no beacon frame has been received yet) -+ * @NL80211_BSS_PRESP_DATA: the data in @NL80211_BSS_INFORMATION_ELEMENTS and -+ * @NL80211_BSS_TSF is known to be from a probe response (flag attribute) - * @__NL80211_BSS_AFTER_LAST: internal - * @NL80211_BSS_MAX: highest BSS attribute + * enum nl80211_bss_status - BSS "status" + * @NL80211_BSS_STATUS_AUTHENTICATED: Authenticated with this BSS. ++ * Note that this is no longer used since cfg80211 no longer ++ * keeps track of whether or not authentication was done with ++ * a given BSS. + * @NL80211_BSS_STATUS_ASSOCIATED: Associated with this BSS. + * @NL80211_BSS_STATUS_IBSS_JOINED: Joined to this IBSS. + * +@@ -3379,6 +3608,8 @@ enum nl80211_ps_state { + * interval in which %NL80211_ATTR_CQM_TXE_PKTS and + * %NL80211_ATTR_CQM_TXE_RATE must be satisfied before generating an + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. ++ * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon ++ * loss event + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute */ -@@ -3034,6 +3160,8 @@ enum nl80211_bss { - NL80211_BSS_SEEN_MS_AGO, - NL80211_BSS_BEACON_IES, - NL80211_BSS_CHAN_WIDTH, -+ NL80211_BSS_BEACON_TSF, -+ NL80211_BSS_PRESP_DATA, +@@ -3391,6 +3622,7 @@ enum nl80211_attr_cqm { + NL80211_ATTR_CQM_TXE_RATE, + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, ++ NL80211_ATTR_CQM_BEACON_LOSS_EVENT, /* keep last */ - __NL80211_BSS_AFTER_LAST, -@@ -3650,6 +3778,8 @@ enum nl80211_iface_limit_attrs { - * different channels may be used within this group. - * @NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS: u32 attribute containing the bitmap - * of supported channel widths for radar detection. -+ * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap -+ * of supported regulatory regions for radar detection. - * @NUM_NL80211_IFACE_COMB: number of attributes - * @MAX_NL80211_IFACE_COMB: highest attribute number + __NL80211_ATTR_CQM_AFTER_LAST, +@@ -3403,9 +3635,7 @@ enum nl80211_attr_cqm { + * configured threshold + * @NL80211_CQM_RSSI_THRESHOLD_EVENT_HIGH: The RSSI is higher than the + * configured threshold +- * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: The device experienced beacon loss. +- * (Note that deauth/disassoc will still follow if the AP is not +- * available. This event might get used as roaming event, etc.) ++ * @NL80211_CQM_RSSI_BEACON_LOSS_EVENT: (reserved, never sent) + */ + enum nl80211_cqm_rssi_threshold_event { + NL80211_CQM_RSSI_THRESHOLD_EVENT_LOW, +@@ -3492,6 +3722,8 @@ struct nl80211_pattern_support { + * @NL80211_WOWLAN_TRIG_ANY: wake up on any activity, do not really put + * the chip into a special state -- works best with chips that have + * support for low-power operation already (flag) ++ * Note that this mode is incompatible with all of the others, if ++ * any others are even supported by the device. + * @NL80211_WOWLAN_TRIG_DISCONNECT: wake up on disconnect, the way disconnect + * is detected is implementation-specific (flag) + * @NL80211_WOWLAN_TRIG_MAGIC_PKT: wake up on magic packet (6x 0xff, followed +@@ -3545,6 +3777,28 @@ struct nl80211_pattern_support { + * @NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS: For wakeup reporting only, + * the TCP connection ran out of tokens to use for data to send to the + * service ++ * @NL80211_WOWLAN_TRIG_NET_DETECT: wake up when a configured network ++ * is detected. This is a nested attribute that contains the ++ * same attributes used with @NL80211_CMD_START_SCHED_SCAN. It ++ * specifies how the scan is performed (e.g. the interval, the ++ * channels to scan and the initial delay) as well as the scan ++ * results that will trigger a wake (i.e. the matchsets). This ++ * attribute is also sent in a response to ++ * @NL80211_CMD_GET_WIPHY, indicating the number of match sets ++ * supported by the driver (u32). ++ * @NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS: nested attribute ++ * containing an array with information about what triggered the ++ * wake up. If no elements are present in the array, it means ++ * that the information is not available. If more than one ++ * element is present, it means that more than one match ++ * occurred. ++ * Each element in the array is a nested attribute that contains ++ * one optional %NL80211_ATTR_SSID attribute and one optional ++ * %NL80211_ATTR_SCAN_FREQUENCIES attribute. At least one of ++ * these attributes must be present. If ++ * %NL80211_ATTR_SCAN_FREQUENCIES contains more than one ++ * frequency, it means that the match occurred in more than one ++ * channel. + * @NUM_NL80211_WOWLAN_TRIG: number of wake on wireless triggers + * @MAX_NL80211_WOWLAN_TRIG: highest wowlan trigger attribute number * -@@ -3683,6 +3813,7 @@ enum nl80211_if_combination_attrs { - NL80211_IFACE_COMB_STA_AP_BI_MATCH, - NL80211_IFACE_COMB_NUM_CHANNELS, - NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, -+ NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, +@@ -3570,6 +3824,8 @@ enum nl80211_wowlan_triggers { + NL80211_WOWLAN_TRIG_WAKEUP_TCP_MATCH, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_CONNLOST, + NL80211_WOWLAN_TRIG_WAKEUP_TCP_NOMORETOKENS, ++ NL80211_WOWLAN_TRIG_NET_DETECT, ++ NL80211_WOWLAN_TRIG_NET_DETECT_RESULTS, /* keep last */ - NUM_NL80211_IFACE_COMB, -@@ -3893,6 +4024,29 @@ enum nl80211_ap_sme_features { - * interface. An active monitor interface behaves like a normal monitor - * interface, but gets added to the driver. It ensures that incoming - * unicast packets directed at the configured interface address get ACKed. -+ * @NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE: This driver supports dynamic -+ * channel bandwidth change (e.g., HT 20 <-> 40 MHz channel) during the -+ * lifetime of a BSS. -+ * @NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES: This device adds a DS Parameter -+ * Set IE to probe requests. -+ * @NL80211_FEATURE_WFA_TPC_IE_IN_PROBES: This device adds a WFA TPC Report IE -+ * to probe requests. -+ * @NL80211_FEATURE_QUIET: This device, in client mode, supports Quiet Period -+ * requests sent to it by an AP. -+ * @NL80211_FEATURE_TX_POWER_INSERTION: This device is capable of inserting the -+ * current tx power value into the TPC Report IE in the spectrum -+ * management TPC Report action frame, and in the Radio Measurement Link -+ * Measurement Report action frame. -+ * @NL80211_FEATURE_ACKTO_ESTIMATION: This driver supports dynamic ACK timeout -+ * estimation (dynack). %NL80211_ATTR_WIPHY_DYN_ACK flag attribute is used -+ * to enable dynack. -+ * @NL80211_FEATURE_STATIC_SMPS: Device supports static spatial -+ * multiplexing powersave, ie. can turn off all but one chain -+ * even on HT connections that should be using more chains. -+ * @NL80211_FEATURE_DYNAMIC_SMPS: Device supports dynamic spatial -+ * multiplexing powersave, ie. can turn off all but one chain -+ * and then wake the rest up as required after, for example, -+ * rts/cts handshake. + NUM_NL80211_WOWLAN_TRIG, +@@ -4042,6 +4298,27 @@ enum nl80211_ap_sme_features { + * multiplexing powersave, ie. can turn off all but one chain + * and then wake the rest up as required after, for example, + * rts/cts handshake. ++ * @NL80211_FEATURE_SUPPORTS_WMM_ADMISSION: the device supports setting up WMM ++ * TSPEC sessions (TID aka TSID 0-7) with the %NL80211_CMD_ADD_TX_TS ++ * command. Standard IEEE 802.11 TSPEC setup is not yet supported, it ++ * needs to be able to handle Block-Ack agreements and other things. ++ * @NL80211_FEATURE_MAC_ON_CREATE: Device supports configuring ++ * the vif's MAC address upon creation. ++ * See 'macaddr' field in the vif_params (cfg80211.h). ++ * @NL80211_FEATURE_TDLS_CHANNEL_SWITCH: Driver supports channel switching when ++ * operating as a TDLS peer. ++ * @NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR: This device/driver supports using a ++ * random MAC address during scan (if the device is unassociated); the ++ * %NL80211_SCAN_FLAG_RANDOM_ADDR flag may be set for scans and the MAC ++ * address mask/value will be used. ++ * @NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR: This device/driver supports ++ * using a random MAC address for every scan iteration during scheduled ++ * scan (while not associated), the %NL80211_SCAN_FLAG_RANDOM_ADDR may ++ * be set for scheduled scan and the MAC address mask/value will be used. ++ * @NL80211_FEATURE_ND_RANDOM_MAC_ADDR: This device/driver supports using a ++ * random MAC address for every scan iteration during "net detect", i.e. ++ * scan in unassociated WoWLAN, the %NL80211_SCAN_FLAG_RANDOM_ADDR may ++ * be set for scheduled scan and the MAC address mask/value will be used. */ enum nl80211_feature_flags { NL80211_FEATURE_SK_TX_STATUS = 1 << 0, -@@ -3913,6 +4067,14 @@ enum nl80211_feature_flags { - NL80211_FEATURE_FULL_AP_CLIENT_STATE = 1 << 15, - NL80211_FEATURE_USERSPACE_MPM = 1 << 16, - NL80211_FEATURE_ACTIVE_MONITOR = 1 << 17, -+ NL80211_FEATURE_AP_MODE_CHAN_WIDTH_CHANGE = 1 << 18, -+ NL80211_FEATURE_DS_PARAM_SET_IE_IN_PROBES = 1 << 19, -+ NL80211_FEATURE_WFA_TPC_IE_IN_PROBES = 1 << 20, -+ NL80211_FEATURE_QUIET = 1 << 21, -+ NL80211_FEATURE_TX_POWER_INSERTION = 1 << 22, -+ NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, -+ NL80211_FEATURE_STATIC_SMPS = 1 << 24, -+ NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, +@@ -4070,6 +4347,27 @@ enum nl80211_feature_flags { + NL80211_FEATURE_ACKTO_ESTIMATION = 1 << 23, + NL80211_FEATURE_STATIC_SMPS = 1 << 24, + NL80211_FEATURE_DYNAMIC_SMPS = 1 << 25, ++ NL80211_FEATURE_SUPPORTS_WMM_ADMISSION = 1 << 26, ++ NL80211_FEATURE_MAC_ON_CREATE = 1 << 27, ++ NL80211_FEATURE_TDLS_CHANNEL_SWITCH = 1 << 28, ++ NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR = 1 << 29, ++ NL80211_FEATURE_SCHED_SCAN_RANDOM_MAC_ADDR = 1 << 30, ++ NL80211_FEATURE_ND_RANDOM_MAC_ADDR = 1 << 31, ++}; ++ ++/** ++ * enum nl80211_ext_feature_index - bit index of extended features. ++ * @NL80211_EXT_FEATURE_VHT_IBSS: This driver supports IBSS with VHT datarates. ++ * ++ * @NUM_NL80211_EXT_FEATURES: number of extended features. ++ * @MAX_NL80211_EXT_FEATURES: highest extended feature index. ++ */ ++enum nl80211_ext_feature_index { ++ NL80211_EXT_FEATURE_VHT_IBSS, ++ ++ /* add new features before the definition below */ ++ NUM_NL80211_EXT_FEATURES, ++ MAX_NL80211_EXT_FEATURES = NUM_NL80211_EXT_FEATURES - 1 }; /** -@@ -3987,6 +4149,25 @@ enum nl80211_acl_policy { +@@ -4118,11 +4416,21 @@ enum nl80211_connect_failed_reason { + * dangerous because will destroy stations performance as a lot of frames + * will be lost while scanning off-channel, therefore it must be used only + * when really needed ++ * @NL80211_SCAN_FLAG_RANDOM_ADDR: use a random MAC address for this scan (or ++ * for scheduled scan: a different one for every scan iteration). When the ++ * flag is set, depending on device capabilities the @NL80211_ATTR_MAC and ++ * @NL80211_ATTR_MAC_MASK attributes may also be given in which case only ++ * the masked bits will be preserved from the MAC address and the remainder ++ * randomised. If the attributes are not given full randomisation (46 bits, ++ * locally administered 1, multicast 0) is assumed. ++ * This flag must not be requested when the feature isn't supported, check ++ * the nl80211 feature flags for the device. + */ + enum nl80211_scan_flags { + NL80211_SCAN_FLAG_LOW_PRIORITY = 1<<0, + NL80211_SCAN_FLAG_FLUSH = 1<<1, + NL80211_SCAN_FLAG_AP = 1<<2, ++ NL80211_SCAN_FLAG_RANDOM_ADDR = 1<<3, }; /** -+ * enum nl80211_smps_mode - SMPS mode -+ * -+ * Requested SMPS mode (for AP mode) -+ * -+ * @NL80211_SMPS_OFF: SMPS off (use all antennas). -+ * @NL80211_SMPS_STATIC: static SMPS (use a single antenna) -+ * @NL80211_SMPS_DYNAMIC: dynamic smps (start with a single antenna and -+ * turn on other antennas after CTS/RTS). -+ */ -+enum nl80211_smps_mode { -+ NL80211_SMPS_OFF, -+ NL80211_SMPS_STATIC, -+ NL80211_SMPS_DYNAMIC, -+ -+ __NL80211_SMPS_AFTER_LAST, -+ NL80211_SMPS_MAX = __NL80211_SMPS_AFTER_LAST - 1 -+}; -+ -+/** - * enum nl80211_radar_event - type of radar event for DFS operation - * - * Type of event to be used with NL80211_ATTR_RADAR_EVENT to inform userspace diff --git a/package/network/utils/iw/patches/010-dynack.patch b/package/network/utils/iw/patches/010-dynack.patch deleted file mode 100644 index 00e4bf2467..0000000000 --- a/package/network/utils/iw/patches/010-dynack.patch +++ /dev/null @@ -1,94 +0,0 @@ - - -Add auto parameter to set distance command in order to enable ACK timeout -estimation algorithm (dynack). Dynack is automatically disabled setting valid -value for coverage class. Currently dynack is supported just by ath9k - -This patch is based on "configure dynack through mac80211/cfg80211 stack" -patchset sent on linux-wireless - -Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> ---- - info.c | 2 ++ - nl80211.h | 12 ++++++++++++ - phy.c | 43 +++++++++++++++++++++++++------------------ - 3 files changed, 39 insertions(+), 18 deletions(-) - ---- a/info.c -+++ b/info.c -@@ -551,6 +551,8 @@ broken_combination: - printf("\tDevice supports scan flush.\n"); - if (features & NL80211_FEATURE_AP_SCAN) - printf("\tDevice supports AP scan.\n"); -+ if (features & NL80211_FEATURE_ACKTO_ESTIMATION) -+ printf("\tDevice supports ACK timeout estimation.\n"); - } - - if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) ---- a/phy.c -+++ b/phy.c -@@ -362,39 +362,46 @@ static int handle_distance(struct nl8021 - int argc, char **argv, - enum id_input id) - { -- char *end; -- unsigned int distance, coverage; -- - if (argc != 1) - return 1; - - if (!*argv[0]) - return 1; - -- distance = strtoul(argv[0], &end, 10); -+ if (strcmp("auto", argv[0]) == 0) { -+ NLA_PUT_FLAG(msg, NL80211_ATTR_WIPHY_DYN_ACK); -+ } else { -+ char *end; -+ unsigned int distance, coverage; - -- if (*end) -- return 1; -+ distance = strtoul(argv[0], &end, 10); - -- /* -- * Divide double the distance by the speed of light in m/usec (300) to -- * get round-trip time in microseconds and then divide the result by -- * three to get coverage class as specified in IEEE 802.11-2007 table -- * 7-27. Values are rounded upwards. -- */ -- coverage = (distance + 449) / 450; -- if (coverage > 255) -- return 1; -+ if (*end) -+ return 1; -+ -+ /* -+ * Divide double the distance by the speed of light -+ * in m/usec (300) to get round-trip time in microseconds -+ * and then divide the result by three to get coverage class -+ * as specified in IEEE 802.11-2007 table 7-27. -+ * Values are rounded upwards. -+ */ -+ coverage = (distance + 449) / 450; -+ if (coverage > 255) -+ return 1; - -- NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage); -+ NLA_PUT_U8(msg, NL80211_ATTR_WIPHY_COVERAGE_CLASS, coverage); -+ } - - return 0; - nla_put_failure: - return -ENOBUFS; - } --COMMAND(set, distance, "<distance>", -+COMMAND(set, distance, "<auto|distance>", - NL80211_CMD_SET_WIPHY, 0, CIB_PHY, handle_distance, -- "Set appropriate coverage class for given link distance in meters.\n" -+ "Enable ACK timeout estimation algorithm (dynack) or set appropriate\n" -+ "coverage class for given link distance in meters.\n" -+ "To disable dynack set valid value for coverage class.\n" - "Valid values: 0 - 114750"); - - static int handle_txpower(struct nl80211_state *state, diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index a6499b3017..882cf89f8d 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -83,15 +83,15 @@ if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) { unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]); -@@ -554,6 +563,7 @@ broken_combination: - if (features & NL80211_FEATURE_ACKTO_ESTIMATION) - printf("\tDevice supports ACK timeout estimation.\n"); +@@ -584,6 +593,7 @@ broken_combination: + if (features & NL80211_FEATURE_DYNAMIC_SMPS) + printf("\tDevice supports dynamic SMPS\n"); } +#endif if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) printf("\tDevice supports T-DLS.\n"); -@@ -603,6 +613,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP +@@ -633,6 +643,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP "List all wireless devices and their capabilities."); TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL); @@ -99,7 +99,7 @@ static int handle_commands(struct nl80211_state *state, struct nl_cb *cb, struct nl_msg *msg, int argc, char **argv, enum id_input id) -@@ -615,6 +626,7 @@ static int handle_commands(struct nl8021 +@@ -645,6 +656,7 @@ static int handle_commands(struct nl8021 } TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands, "list all known commands and their decimal & hex value"); |