Fix rt2x00 compilation and upgrade to the current mainline version (2.6.24)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@10573 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 208 insertions, 169 deletions

diff --git a/package/rt2x00/src/rt2x00mac.c b/package/rt2x00/src/rt2x00mac.c
index 8835df2e2e..85ea8a8e65 100644
--- a/package/rt2x00/src/rt2x00mac.c
+++ b/package/rt2x00/src/rt2x00mac.c
@@ -19,10 +19,8 @@
  */
 
 /*
-	Module: rt2x00lib
+	Module: rt2x00mac
 	Abstract: rt2x00 generic mac80211 routines.
-	Supported chipsets: RT2460, RT2560, RT2570,
-	rt2561, rt2561s, rt2661, rt2571W & rt2671.
  */
 
 /*
@@ -30,15 +28,16 @@
  */
 #define DRV_NAME "rt2x00lib"
 
-#include <linux/netdevice.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 
 #include "rt2x00.h"
 #include "rt2x00lib.h"
-#include "rt2x00dev.h"
 
-static int rt2x00_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
-	struct data_ring *ring, struct sk_buff *frag_skb,
-	struct ieee80211_tx_control *control)
+static int rt2x00mac_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
+				struct data_ring *ring,
+				struct sk_buff *frag_skb,
+				struct ieee80211_tx_control *control)
 {
 	struct sk_buff *skb;
 	int size;
@@ -58,13 +57,13 @@ static int rt2x00_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	skb_put(skb, size);
 
 	if (control->flags & IEEE80211_TXCTL_USE_CTS_PROTECT)
-		ieee80211_ctstoself_get(rt2x00dev->hw,
-			frag_skb->data, frag_skb->len, control,
-			(struct ieee80211_cts*)(skb->data));
+		ieee80211_ctstoself_get(rt2x00dev->hw, rt2x00dev->interface.id,
+					frag_skb->data, frag_skb->len, control,
+					(struct ieee80211_cts *)(skb->data));
 	else
-		ieee80211_rts_get(rt2x00dev->hw,
-			frag_skb->data, frag_skb->len, control,
-			(struct ieee80211_rts*)(skb->data));
+		ieee80211_rts_get(rt2x00dev->hw, rt2x00dev->interface.id,
+				  frag_skb->data, frag_skb->len, control,
+				  (struct ieee80211_rts *)(skb->data));
 
 	if (rt2x00dev->ops->lib->write_tx_data(rt2x00dev, ring, skb, control)) {
 		WARNING(rt2x00dev, "Failed to send RTS/CTS frame.\n");
@@ -74,23 +73,34 @@ static int rt2x00_tx_rts_cts(struct rt2x00_dev *rt2x00dev,
 	return NETDEV_TX_OK;
 }
 
-int rt2x00lib_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
-	struct ieee80211_tx_control *control)
+int rt2x00mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
+		 struct ieee80211_tx_control *control)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
-	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr*)skb->data;
+	struct ieee80211_hdr *ieee80211hdr = (struct ieee80211_hdr *)skb->data;
 	struct data_ring *ring;
 	u16 frame_control;
 
 	/*
+	 * Mac80211 might be calling this function while we are trying
+	 * to remove the device or perhaps suspending it.
+	 * Note that we can only stop the TX queues inside the TX path
+	 * due to possible race conditions in mac80211.
+	 */
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags)) {
+		ieee80211_stop_queues(hw);
+		return 0;
+	}
+
+	/*
 	 * Determine which ring to put packet on.
 	 */
-	ring = rt2x00_get_ring(rt2x00dev, control->queue);
+	ring = rt2x00lib_get_ring(rt2x00dev, control->queue);
 	if (unlikely(!ring)) {
 		ERROR(rt2x00dev,
-			"Attempt to send packet over invalid queue %d.\n"
-			"Please file bug report to %s.\n",
-			control->queue, DRV_PROJECT);
+		      "Attempt to send packet over invalid queue %d.\n"
+		      "Please file bug report to %s.\n",
+		      control->queue, DRV_PROJECT);
 		dev_kfree_skb_any(skb);
 		return NETDEV_TX_OK;
 	}
@@ -102,12 +112,13 @@ int rt2x00lib_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 	 * frame as well as the data frame.
 	 */
 	frame_control = le16_to_cpu(ieee80211hdr->frame_control);
-	if (control->flags & IEEE80211_TXCTL_USE_RTS_CTS &&
-	    !is_cts_frame(frame_control) && !is_rts_frame(frame_control)) {
+	if (!is_rts_frame(frame_control) && !is_cts_frame(frame_control) &&
+	    (control->flags & (IEEE80211_TXCTL_USE_RTS_CTS |
+			       IEEE80211_TXCTL_USE_CTS_PROTECT))) {
 		if (rt2x00_ring_free(ring) <= 1)
 			return NETDEV_TX_BUSY;
 
-		if (rt2x00_tx_rts_cts(rt2x00dev, ring, skb, control))
+		if (rt2x00mac_tx_rts_cts(rt2x00dev, ring, skb, control))
 			return NETDEV_TX_BUSY;
 	}
 
@@ -119,131 +130,149 @@ int rt2x00lib_tx(struct ieee80211_hw *hw, struct sk_buff *skb,
 
 	return NETDEV_TX_OK;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_tx);
+EXPORT_SYMBOL_GPL(rt2x00mac_tx);
 
-int rt2x00lib_reset(struct ieee80211_hw *hw)
+int rt2x00mac_start(struct ieee80211_hw *hw)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int status;
+
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
+	    test_bit(DEVICE_STARTED, &rt2x00dev->flags))
+		return 0;
+
+	/*
+	 * If this is the first interface which is added,
+	 * we should load the firmware now.
+	 */
+	if (test_bit(DRIVER_REQUIRE_FIRMWARE, &rt2x00dev->flags)) {
+		status = rt2x00lib_load_firmware(rt2x00dev);
+		if (status)
+			return status;
+	}
+
+	/*
+	 * Initialize the device.
+	 */
+	status = rt2x00lib_initialize(rt2x00dev);
+	if (status)
+		return status;
+
+	/*
+	 * Enable radio.
+	 */
+	status = rt2x00lib_enable_radio(rt2x00dev);
+	if (status) {
+		rt2x00lib_uninitialize(rt2x00dev);
+		return status;
+	}
+
+	__set_bit(DEVICE_STARTED, &rt2x00dev->flags);
 
+	return 0;
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_start);
+
+void rt2x00mac_stop(struct ieee80211_hw *hw)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+		return;
+
+	/*
+	 * Perhaps we can add something smarter here,
+	 * but for now just disabling the radio should do.
+	 */
 	rt2x00lib_disable_radio(rt2x00dev);
-	return rt2x00lib_enable_radio(rt2x00dev);
+
+	__clear_bit(DEVICE_STARTED, &rt2x00dev->flags);
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_reset);
+EXPORT_SYMBOL_GPL(rt2x00mac_stop);
 
-int rt2x00lib_add_interface(struct ieee80211_hw *hw,
-	struct ieee80211_if_init_conf *conf)
+int rt2x00mac_add_interface(struct ieee80211_hw *hw,
+			    struct ieee80211_if_init_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct interface *intf = &rt2x00dev->interface;
-	int status;
+
+	/* FIXME: Beaconing is broken in rt2x00. */
+	if (conf->type == IEEE80211_IF_TYPE_IBSS ||
+	    conf->type == IEEE80211_IF_TYPE_AP) {
+		ERROR(rt2x00dev,
+		      "rt2x00 does not support Adhoc or Master mode");
+		return -EOPNOTSUPP;
+	}
 
 	/*
-	 * We only support 1 non-monitor interface.
+	 * Don't allow interfaces to be added while
+	 * either the device has disappeared or when
+	 * another interface is already present.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_MNTR &&
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
 	    is_interface_present(intf))
 		return -ENOBUFS;
 
-	/*
-	 * We support muliple monitor mode interfaces.
-	 * All we need to do is increase the monitor_count.
-	 */
-	if (conf->type == IEEE80211_IF_TYPE_MNTR) {
-		intf->monitor_count++;
-	} else {
-		intf->id = conf->if_id;
-		intf->type = conf->type;
-		if (conf->type == IEEE80211_IF_TYPE_AP)
-			memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
-		intf->promisc = 0;
-	}
+	intf->id = conf->if_id;
+	intf->type = conf->type;
+	if (conf->type == IEEE80211_IF_TYPE_AP)
+		memcpy(&intf->bssid, conf->mac_addr, ETH_ALEN);
+	memcpy(&intf->mac, conf->mac_addr, ETH_ALEN);
 
 	/*
-	 * Initialize interface, and enable the radio when this
-	 * is the first interface that is brought up.
+	 * The MAC adddress must be configured after the device
+	 * has been initialized. Otherwise the device can reset
+	 * the MAC registers.
 	 */
-	if (!test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags)) {
-		/*
-		 * We must wait on the firmware before
-		 * we can safely continue.
-		 */
-		status = rt2x00lib_load_firmware_wait(rt2x00dev);
-		if (status)
-			return status;
-
-		/*
-		 * Before initialization, the mac address should
-		 * be configured.
-		 */
-		rt2x00dev->ops->lib->config_mac_addr(rt2x00dev,
-			conf->mac_addr);
- 
-		/*
-		 * Initialize the device.
-		 */
-		status = rt2x00lib_initialize(rt2x00dev);
-		if (status)
-			return status;
-
-		/*
-		 * Enable radio.
-		 */
-		status = rt2x00lib_enable_radio(rt2x00dev);
-		if (status)
-			return status;
-	}
+	rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
+	rt2x00lib_config_type(rt2x00dev, conf->type);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_add_interface);
+EXPORT_SYMBOL_GPL(rt2x00mac_add_interface);
 
-void rt2x00lib_remove_interface(struct ieee80211_hw *hw,
-	struct ieee80211_if_init_conf *conf)
+void rt2x00mac_remove_interface(struct ieee80211_hw *hw,
+				struct ieee80211_if_init_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct interface *intf = &rt2x00dev->interface;
 
 	/*
-	 * We only support 1 non-monitor interface.
+	 * Don't allow interfaces to be remove while
+	 * either the device has disappeared or when
+	 * no interface is present.
 	 */
-	if (conf->type != IEEE80211_IF_TYPE_MNTR &&
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags) ||
 	    !is_interface_present(intf))
 		return;
 
-	/*
-	 * When removing an monitor interface, decrease monitor_count.
-	 * For non-monitor interfaces, all interface data needs to be reset.
-	 */
-	if (conf->type == IEEE80211_IF_TYPE_MNTR) {
-		intf->monitor_count--;
-	} else if (intf->type == conf->type) {
-		intf->id = 0;
-		intf->type = -EINVAL;
-		memset(&intf->bssid, 0x00, ETH_ALEN);
-		intf->promisc = 0;
-	}
+	intf->id = 0;
+	intf->type = INVALID_INTERFACE;
+	memset(&intf->bssid, 0x00, ETH_ALEN);
+	memset(&intf->mac, 0x00, ETH_ALEN);
 
 	/*
-	 * If this was the last interface,
-	 * this is the time to disable the radio.
-	 * If this is not the last interface, then we should
-	 * check if we should switch completely to monitor
-	 * mode or completely switch to the non-monitor mode.
+	 * Make sure the bssid and mac address registers
+	 * are cleared to prevent false ACKing of frames.
 	 */
-	if (!is_monitor_present(intf) && !is_interface_present(intf))
-		rt2x00lib_disable_radio(rt2x00dev);
-	else if (is_monitor_present(intf) ^ is_interface_present(intf))
-		rt2x00lib_config_type(rt2x00dev,
-			is_interface_present(intf) ?
-				intf->type : IEEE80211_IF_TYPE_MNTR);
+	rt2x00lib_config_mac_addr(rt2x00dev, intf->mac);
+	rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
+	rt2x00lib_config_type(rt2x00dev, intf->type);
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_remove_interface);
+EXPORT_SYMBOL_GPL(rt2x00mac_remove_interface);
 
-int rt2x00lib_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
+int rt2x00mac_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
 	/*
+	 * Mac80211 might be calling this function while we are trying
+	 * to remove the device or perhaps suspending it.
+	 */
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
+	/*
 	 * Check if we need to disable the radio,
 	 * if this is not the case, at least the RX must be disabled.
 	 */
@@ -251,46 +280,42 @@ int rt2x00lib_config(struct ieee80211_hw *hw, struct ieee80211_conf *conf)
 		if (!conf->radio_enabled)
 			rt2x00lib_disable_radio(rt2x00dev);
 		else
-			rt2x00lib_toggle_rx(rt2x00dev, 0);
+			rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_OFF);
 	}
 
-	rt2x00lib_config_phymode(rt2x00dev, conf->phymode);
-	rt2x00lib_config_channel(rt2x00dev, conf->channel_val,
-		conf->channel, conf->freq, conf->power_level);
-	rt2x00lib_config_txpower(rt2x00dev, conf->power_level);
-	rt2x00lib_config_antenna(rt2x00dev,
-		conf->antenna_sel_tx, conf->antenna_sel_rx);
-	rt2x00dev->ops->lib->config_duration(rt2x00dev,
-		(conf->flags & IEEE80211_CONF_SHORT_SLOT_TIME),
-		conf->beacon_int);
+	rt2x00lib_config(rt2x00dev, conf, 0);
 
 	/*
 	 * Reenable RX only if the radio should be on.
 	 */
 	if (test_bit(DEVICE_ENABLED_RADIO, &rt2x00dev->flags))
-		rt2x00lib_toggle_rx(rt2x00dev, 1);
+		rt2x00lib_toggle_rx(rt2x00dev, STATE_RADIO_RX_ON);
 	else if (conf->radio_enabled)
 		return rt2x00lib_enable_radio(rt2x00dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_config);
+EXPORT_SYMBOL_GPL(rt2x00mac_config);
 
-int rt2x00lib_config_interface(struct ieee80211_hw *hw, int if_id,
-	struct ieee80211_if_conf *conf)
+int rt2x00mac_config_interface(struct ieee80211_hw *hw, int if_id,
+			       struct ieee80211_if_conf *conf)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct interface *intf = &rt2x00dev->interface;
 	int status;
 
 	/*
-	 * Monitor mode does not need configuring.
+	 * Mac80211 might be calling this function while we are trying
+	 * to remove the device or perhaps suspending it.
+	 */
+	if (!test_bit(DEVICE_PRESENT, &rt2x00dev->flags))
+		return 0;
+
+	/*
 	 * If the given type does not match the configured type,
 	 * there has been a problem.
 	 */
-	if (conf->type == IEEE80211_IF_TYPE_MNTR)
-		return 0;
-	else if (conf->type != intf->type)
+	if (conf->type != intf->type)
 		return -EINVAL;
 
 	/*
@@ -300,14 +325,7 @@ int rt2x00lib_config_interface(struct ieee80211_hw *hw, int if_id,
 	 */
 	if (conf->type != IEEE80211_IF_TYPE_AP)
 		memcpy(&intf->bssid, conf->bssid, ETH_ALEN);
-
-	/*
-	 * Enable configuration.
-	 * For Monitor mode, promisc mode will be forced on.
-	 */
-	rt2x00lib_config_type(rt2x00dev, conf->type);
-	rt2x00lib_config_promisc(rt2x00dev, rt2x00dev->interface.promisc);
-	rt2x00dev->ops->lib->config_bssid(rt2x00dev, intf->bssid);
+	rt2x00lib_config_bssid(rt2x00dev, intf->bssid);
 
 	/*
 	 * We only need to initialize the beacon when master mode is enabled.
@@ -316,65 +334,86 @@ int rt2x00lib_config_interface(struct ieee80211_hw *hw, int if_id,
 		return 0;
 
 	status = rt2x00dev->ops->hw->beacon_update(rt2x00dev->hw,
-		conf->beacon, conf->beacon_control);
+						   conf->beacon,
+						   conf->beacon_control);
 	if (status)
 		dev_kfree_skb(conf->beacon);
 
 	return status;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_config_interface);
+EXPORT_SYMBOL_GPL(rt2x00mac_config_interface);
 
-void rt2x00lib_set_multicast_list(struct ieee80211_hw *hw,
-	unsigned short flags, int mc_count)
+int rt2x00mac_get_stats(struct ieee80211_hw *hw,
+			struct ieee80211_low_level_stats *stats)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 
 	/*
-	 * Promisc mode is forced on for Monitor interfaces.
+	 * The dot11ACKFailureCount, dot11RTSFailureCount and
+	 * dot11RTSSuccessCount are updated in interrupt time.
+	 * dot11FCSErrorCount is updated in the link tuner.
 	 */
-	if (is_monitor_present(&rt2x00dev->interface))
-		return;
+	memcpy(stats, &rt2x00dev->low_level_stats, sizeof(*stats));
 
-	/*
-	 * Check if the new state is different then the old state.
-	 */
-	if (test_bit(INTERFACE_ENABLED_PROMISC, &rt2x00dev->flags) ==
-	    !!(flags & IFF_PROMISC))
-		return;
-
-	rt2x00dev->interface.promisc = !!(flags & IFF_PROMISC);
-
-	/*
-	 * Schedule the link tuner if this does not run
-	 * automatically. The link tuner will be automatically
-	 * switched off when it is not required.
-	 */
-	if (!work_pending(&rt2x00dev->link.work.work))
-		queue_work(rt2x00dev->hw->workqueue, &rt2x00dev->link.work.work);
+	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_set_multicast_list);
+EXPORT_SYMBOL_GPL(rt2x00mac_get_stats);
 
-int rt2x00lib_get_tx_stats(struct ieee80211_hw *hw,
-	struct ieee80211_tx_queue_stats *stats)
+int rt2x00mac_get_tx_stats(struct ieee80211_hw *hw,
+			   struct ieee80211_tx_queue_stats *stats)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	unsigned int i;
 
 	for (i = 0; i < hw->queues; i++)
 		memcpy(&stats->data[i], &rt2x00dev->tx[i].stats,
-			sizeof(rt2x00dev->tx[i].stats));
+		       sizeof(rt2x00dev->tx[i].stats));
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_get_tx_stats);
+EXPORT_SYMBOL_GPL(rt2x00mac_get_tx_stats);
+
+void rt2x00mac_erp_ie_changed(struct ieee80211_hw *hw, u8 changes,
+			      int cts_protection, int preamble)
+{
+	struct rt2x00_dev *rt2x00dev = hw->priv;
+	int short_preamble;
+	int ack_timeout;
+	int ack_consume_time;
+	int difs;
+
+	/*
+	 * We only support changing preamble mode.
+	 */
+	if (!(changes & IEEE80211_ERP_CHANGE_PREAMBLE))
+		return;
+
+	short_preamble = !preamble;
+	preamble = !!(preamble) ? PREAMBLE : SHORT_PREAMBLE;
+
+	difs = (hw->conf.flags & IEEE80211_CONF_SHORT_SLOT_TIME) ?
+		SHORT_DIFS : DIFS;
+	ack_timeout = difs + PLCP + preamble + get_duration(ACK_SIZE, 10);
+
+	ack_consume_time = SIFS + PLCP + preamble + get_duration(ACK_SIZE, 10);
+
+	if (short_preamble)
+		__set_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags);
+	else
+		__clear_bit(CONFIG_SHORT_PREAMBLE, &rt2x00dev->flags);
+
+	rt2x00dev->ops->lib->config_preamble(rt2x00dev, short_preamble,
+					     ack_timeout, ack_consume_time);
+}
+EXPORT_SYMBOL_GPL(rt2x00mac_erp_ie_changed);
 
-int rt2x00lib_conf_tx(struct ieee80211_hw *hw, int queue,
-	const struct ieee80211_tx_queue_params *params)
+int rt2x00mac_conf_tx(struct ieee80211_hw *hw, int queue,
+		      const struct ieee80211_tx_queue_params *params)
 {
 	struct rt2x00_dev *rt2x00dev = hw->priv;
 	struct data_ring *ring;
 
-	ring = rt2x00_get_ring(rt2x00dev, queue);
+	ring = rt2x00lib_get_ring(rt2x00dev, queue);
 	if (unlikely(!ring))
 		return -EINVAL;
 
@@ -398,10 +437,10 @@ int rt2x00lib_conf_tx(struct ieee80211_hw *hw, int queue,
 		ring->tx_params.aifs = 2;
 
 	INFO(rt2x00dev,
-		"Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
-		queue, ring->tx_params.cw_min, ring->tx_params.cw_max,
-		ring->tx_params.aifs);
+	     "Configured TX ring %d - CWmin: %d, CWmax: %d, Aifs: %d.\n",
+	     queue, ring->tx_params.cw_min, ring->tx_params.cw_max,
+	     ring->tx_params.aifs);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(rt2x00lib_conf_tx);
+EXPORT_SYMBOL_GPL(rt2x00mac_conf_tx);