diff options
author | Felix Fietkau <nbd@openwrt.org> | 2015-03-13 03:02:28 +0000 |
---|---|---|
committer | Felix Fietkau <nbd@openwrt.org> | 2015-03-13 03:02:28 +0000 |
commit | 6402b8402fb7ae4ce2874ca4b63c730b01f4b4a2 (patch) | |
tree | fc284dc684b04e5289b1046ec0c213b085faf214 /target/linux/ath25/patches-3.18/010-board.patch | |
parent | d057b4aae39c3b12d2ab141df88bc0f073d4c4b4 (diff) | |
download | master-187ad058-6402b8402fb7ae4ce2874ca4b63c730b01f4b4a2.tar.gz master-187ad058-6402b8402fb7ae4ce2874ca4b63c730b01f4b4a2.tar.bz2 master-187ad058-6402b8402fb7ae4ce2874ca4b63c730b01f4b4a2.zip |
Rename 'atheros' target to 'ath25'
Rename 'atheros' target to more precise 'ath25'.
Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44736 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ath25/patches-3.18/010-board.patch')
-rw-r--r-- | target/linux/ath25/patches-3.18/010-board.patch | 2189 |
1 files changed, 2189 insertions, 0 deletions
diff --git a/target/linux/ath25/patches-3.18/010-board.patch b/target/linux/ath25/patches-3.18/010-board.patch new file mode 100644 index 0000000000..03332b6e30 --- /dev/null +++ b/target/linux/ath25/patches-3.18/010-board.patch @@ -0,0 +1,2189 @@ +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -96,6 +96,19 @@ config AR7 + Support for the Texas Instruments AR7 System-on-a-Chip + family: TNETD7100, 7200 and 7300. + ++config ATH25 ++ bool "Atheros AR231x/AR531x SoC support" ++ select CEVT_R4K ++ select CSRC_R4K ++ select DMA_NONCOHERENT ++ select IRQ_CPU ++ select IRQ_DOMAIN ++ select SYS_HAS_CPU_MIPS32_R1 ++ select SYS_SUPPORTS_BIG_ENDIAN ++ select SYS_SUPPORTS_32BIT_KERNEL ++ help ++ Support for Atheros AR231x and Atheros AR531x based boards ++ + config ATH79 + bool "Atheros AR71XX/AR724X/AR913X based boards" + select ARCH_REQUIRE_GPIOLIB +@@ -835,6 +848,7 @@ config MIPS_PARAVIRT + endchoice + + source "arch/mips/alchemy/Kconfig" ++source "arch/mips/ath25/Kconfig" + source "arch/mips/ath79/Kconfig" + source "arch/mips/bcm47xx/Kconfig" + source "arch/mips/bcm63xx/Kconfig" +--- a/arch/mips/Kbuild.platforms ++++ b/arch/mips/Kbuild.platforms +@@ -2,6 +2,7 @@ + + platforms += alchemy + platforms += ar7 ++platforms += ath25 + platforms += ath79 + platforms += bcm47xx + platforms += bcm63xx +--- /dev/null ++++ b/arch/mips/ath25/Platform +@@ -0,0 +1,6 @@ ++# ++# Atheros AR531X/AR231X WiSoC ++# ++platform-$(CONFIG_ATH25) += ath25/ ++cflags-$(CONFIG_ATH25) += -I$(srctree)/arch/mips/include/asm/mach-ath25 ++load-$(CONFIG_ATH25) += 0xffffffff80041000 +--- /dev/null ++++ b/arch/mips/ath25/Kconfig +@@ -0,0 +1,9 @@ ++config SOC_AR5312 ++ bool "Atheros AR5312/AR2312+ SoC support" ++ depends on ATH25 ++ default y ++ ++config SOC_AR2315 ++ bool "Atheros AR2315+ SoC support" ++ depends on ATH25 ++ default y +--- /dev/null ++++ b/arch/mips/ath25/Makefile +@@ -0,0 +1,13 @@ ++# ++# This file is subject to the terms and conditions of the GNU General Public ++# License. See the file "COPYING" in the main directory of this archive ++# for more details. ++# ++# Copyright (C) 2006 FON Technology, SL. ++# Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++# Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> ++# ++ ++obj-y += board.o prom.o devices.o ++obj-$(CONFIG_SOC_AR5312) += ar5312.o ++obj-$(CONFIG_SOC_AR2315) += ar2315.o +--- /dev/null ++++ b/arch/mips/ath25/board.c +@@ -0,0 +1,234 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> ++ */ ++ ++#include <linux/init.h> ++#include <linux/interrupt.h> ++#include <asm/irq_cpu.h> ++#include <asm/reboot.h> ++#include <asm/bootinfo.h> ++#include <asm/time.h> ++ ++#include <ath25_platform.h> ++#include "devices.h" ++#include "ar5312.h" ++#include "ar2315.h" ++ ++void (*ath25_irq_dispatch)(void); ++ ++static inline bool check_radio_magic(const void __iomem *addr) ++{ ++ addr += 0x7a; /* offset for flash magic */ ++ return (__raw_readb(addr) == 0x5a) && (__raw_readb(addr + 1) == 0xa5); ++} ++ ++static inline bool check_notempty(const void __iomem *addr) ++{ ++ return __raw_readl(addr) != 0xffffffff; ++} ++ ++static inline bool check_board_data(const void __iomem *addr, bool broken) ++{ ++ /* config magic found */ ++ if (__raw_readl(addr) == ATH25_BD_MAGIC) ++ return true; ++ ++ if (!broken) ++ return false; ++ ++ /* broken board data detected, use radio data to find the ++ * offset, user will fix this */ ++ ++ if (check_radio_magic(addr + 0x1000)) ++ return true; ++ if (check_radio_magic(addr + 0xf8)) ++ return true; ++ ++ return false; ++} ++ ++static const void __iomem * __init find_board_config(const void __iomem *limit, ++ const bool broken) ++{ ++ const void __iomem *addr; ++ const void __iomem *begin = limit - 0x1000; ++ const void __iomem *end = limit - 0x30000; ++ ++ for (addr = begin; addr >= end; addr -= 0x1000) ++ if (check_board_data(addr, broken)) ++ return addr; ++ ++ return NULL; ++} ++ ++static const void __iomem * __init find_radio_config(const void __iomem *limit, ++ const void __iomem *bcfg) ++{ ++ const void __iomem *rcfg, *begin, *end; ++ ++ /* ++ * Now find the start of Radio Configuration data, using heuristics: ++ * Search forward from Board Configuration data by 0x1000 bytes ++ * at a time until we find non-0xffffffff. ++ */ ++ begin = bcfg + 0x1000; ++ end = limit; ++ for (rcfg = begin; rcfg < end; rcfg += 0x1000) ++ if (check_notempty(rcfg) && check_radio_magic(rcfg)) ++ return rcfg; ++ ++ /* AR2316 relocates radio config to new location */ ++ begin = bcfg + 0xf8; ++ end = limit - 0x1000 + 0xf8; ++ for (rcfg = begin; rcfg < end; rcfg += 0x1000) ++ if (check_notempty(rcfg) && check_radio_magic(rcfg)) ++ return rcfg; ++ ++ return NULL; ++} ++ ++/* ++ * NB: Search region size could be larger than the actual flash size, ++ * but this shouldn't be a problem here, because the flash ++ * will simply be mapped multiple times. ++ */ ++int __init ath25_find_config(phys_addr_t base, unsigned long size) ++{ ++ const void __iomem *flash_base, *flash_limit; ++ struct ath25_boarddata *config; ++ unsigned int rcfg_size; ++ int broken_boarddata = 0; ++ const void __iomem *bcfg, *rcfg; ++ u8 *board_data; ++ u8 *radio_data; ++ u8 *mac_addr; ++ u32 offset; ++ ++ flash_base = ioremap_nocache(base, size); ++ flash_limit = flash_base + size; ++ ++ ath25_board.config = NULL; ++ ath25_board.radio = NULL; ++ ++ /* Copy the board and radio data to RAM, because accessing the mapped ++ * memory of the flash directly after booting is not safe */ ++ ++ /* Try to find valid board and radio data */ ++ bcfg = find_board_config(flash_limit, false); ++ ++ /* If that fails, try to at least find valid radio data */ ++ if (!bcfg) { ++ bcfg = find_board_config(flash_limit, true); ++ broken_boarddata = 1; ++ } ++ ++ if (!bcfg) { ++ pr_warn("WARNING: No board configuration data found!\n"); ++ goto error; ++ } ++ ++ board_data = kzalloc(BOARD_CONFIG_BUFSZ, GFP_KERNEL); ++ ath25_board.config = (struct ath25_boarddata *)board_data; ++ memcpy_fromio(board_data, bcfg, 0x100); ++ if (broken_boarddata) { ++ pr_warn("WARNING: broken board data detected\n"); ++ config = ath25_board.config; ++ if (is_zero_ether_addr(config->enet0_mac)) { ++ pr_info("Fixing up empty mac addresses\n"); ++ config->reset_config_gpio = 0xffff; ++ config->sys_led_gpio = 0xffff; ++ random_ether_addr(config->wlan0_mac); ++ config->wlan0_mac[0] &= ~0x06; ++ random_ether_addr(config->enet0_mac); ++ random_ether_addr(config->enet1_mac); ++ } ++ } ++ ++ /* Radio config starts 0x100 bytes after board config, regardless ++ * of what the physical layout on the flash chip looks like */ ++ ++ rcfg = find_radio_config(flash_limit, bcfg); ++ if (!rcfg) { ++ pr_warn("WARNING: Could not find Radio Configuration data\n"); ++ goto error; ++ } ++ ++ radio_data = board_data + 0x100 + ((rcfg - bcfg) & 0xfff); ++ ath25_board.radio = radio_data; ++ offset = radio_data - board_data; ++ pr_info("Radio config found at offset 0x%x (0x%x)\n", rcfg - bcfg, ++ offset); ++ rcfg_size = BOARD_CONFIG_BUFSZ - offset; ++ memcpy_fromio(radio_data, rcfg, rcfg_size); ++ ++ mac_addr = &radio_data[0x1d * 2]; ++ if (is_broadcast_ether_addr(mac_addr)) { ++ pr_info("Radio MAC is blank; using board-data\n"); ++ ether_addr_copy(mac_addr, ath25_board.config->wlan0_mac); ++ } ++ ++ iounmap(flash_base); ++ ++ return 0; ++ ++error: ++ iounmap(flash_base); ++ return -ENODEV; ++} ++ ++static void ath25_halt(void) ++{ ++ local_irq_disable(); ++ unreachable(); ++} ++ ++void __init plat_mem_setup(void) ++{ ++ _machine_halt = ath25_halt; ++ pm_power_off = ath25_halt; ++ ++ if (is_ar5312()) ++ ar5312_plat_mem_setup(); ++ else ++ ar2315_plat_mem_setup(); ++ ++ /* Disable data watchpoints */ ++ write_c0_watchlo0(0); ++} ++ ++asmlinkage void plat_irq_dispatch(void) ++{ ++ ath25_irq_dispatch(); ++} ++ ++void __init plat_time_init(void) ++{ ++ if (is_ar5312()) ++ ar5312_plat_time_init(); ++ else ++ ar2315_plat_time_init(); ++} ++ ++unsigned int __cpuinit get_c0_compare_int(void) ++{ ++ return CP0_LEGACY_COMPARE_IRQ; ++} ++ ++void __init arch_init_irq(void) ++{ ++ clear_c0_status(ST0_IM); ++ mips_cpu_irq_init(); ++ ++ /* Initialize interrupt controllers */ ++ if (is_ar5312()) ++ ar5312_arch_init_irq(); ++ else ++ ar2315_arch_init_irq(); ++} +--- /dev/null ++++ b/arch/mips/ath25/prom.c +@@ -0,0 +1,26 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright MontaVista Software Inc ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> ++ */ ++ ++/* ++ * Prom setup file for AR5312/AR231x SoCs ++ */ ++ ++#include <linux/init.h> ++#include <asm/bootinfo.h> ++ ++void __init prom_init(void) ++{ ++} ++ ++void __init prom_free_prom_memory(void) ++{ ++} +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath25/ath25_platform.h +@@ -0,0 +1,73 @@ ++#ifndef __ASM_MACH_ATH25_PLATFORM_H ++#define __ASM_MACH_ATH25_PLATFORM_H ++ ++#include <linux/etherdevice.h> ++ ++/* ++ * This is board-specific data that is stored in a "fixed" location in flash. ++ * It is shared across operating systems, so it should not be changed lightly. ++ * The main reason we need it is in order to extract the ethernet MAC ++ * address(es). ++ */ ++struct ath25_boarddata { ++ u32 magic; /* board data is valid */ ++#define ATH25_BD_MAGIC 0x35333131 /* "5311", for all 531x/231x platforms */ ++ u16 cksum; /* checksum (starting with BD_REV 2) */ ++ u16 rev; /* revision of this struct */ ++#define BD_REV 4 ++ char board_name[64]; /* Name of board */ ++ u16 major; /* Board major number */ ++ u16 minor; /* Board minor number */ ++ u32 flags; /* Board configuration */ ++#define BD_ENET0 0x00000001 /* ENET0 is stuffed */ ++#define BD_ENET1 0x00000002 /* ENET1 is stuffed */ ++#define BD_UART1 0x00000004 /* UART1 is stuffed */ ++#define BD_UART0 0x00000008 /* UART0 is stuffed (dma) */ ++#define BD_RSTFACTORY 0x00000010 /* Reset factory defaults stuffed */ ++#define BD_SYSLED 0x00000020 /* System LED stuffed */ ++#define BD_EXTUARTCLK 0x00000040 /* External UART clock */ ++#define BD_CPUFREQ 0x00000080 /* cpu freq is valid in nvram */ ++#define BD_SYSFREQ 0x00000100 /* sys freq is set in nvram */ ++#define BD_WLAN0 0x00000200 /* Enable WLAN0 */ ++#define BD_MEMCAP 0x00000400 /* CAP SDRAM @ mem_cap for testing */ ++#define BD_DISWATCHDOG 0x00000800 /* disable system watchdog */ ++#define BD_WLAN1 0x00001000 /* Enable WLAN1 (ar5212) */ ++#define BD_ISCASPER 0x00002000 /* FLAG for AR2312 */ ++#define BD_WLAN0_2G_EN 0x00004000 /* FLAG for radio0_2G */ ++#define BD_WLAN0_5G_EN 0x00008000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_2G_EN 0x00020000 /* FLAG for radio0_2G */ ++#define BD_WLAN1_5G_EN 0x00040000 /* FLAG for radio0_2G */ ++ u16 reset_config_gpio; /* Reset factory GPIO pin */ ++ u16 sys_led_gpio; /* System LED GPIO pin */ ++ ++ u32 cpu_freq; /* CPU core frequency in Hz */ ++ u32 sys_freq; /* System frequency in Hz */ ++ u32 cnt_freq; /* Calculated C0_COUNT frequency */ ++ ++ u8 wlan0_mac[ETH_ALEN]; ++ u8 enet0_mac[ETH_ALEN]; ++ u8 enet1_mac[ETH_ALEN]; ++ ++ u16 pci_id; /* Pseudo PCIID for common code */ ++ u16 mem_cap; /* cap bank1 in MB */ ++ ++ /* version 3 */ ++ u8 wlan1_mac[ETH_ALEN]; /* (ar5212) */ ++}; ++ ++#define BOARD_CONFIG_BUFSZ 0x1000 ++ ++/* ++ * Platform device information for the Wireless MAC ++ */ ++struct ar231x_board_config { ++ u16 devid; ++ ++ /* board config data */ ++ struct ath25_boarddata *config; ++ ++ /* radio calibration data */ ++ const char *radio; ++}; ++ ++#endif /* __ASM_MACH_ATH25_PLATFORM_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath25/cpu-feature-overrides.h +@@ -0,0 +1,64 @@ ++/* ++ * Atheros AR231x/AR531x SoC specific CPU feature overrides ++ * ++ * Copyright (C) 2008 Gabor Juhos <juhosg@openwrt.org> ++ * ++ * This file was derived from: include/asm-mips/cpu-features.h ++ * Copyright (C) 2003, 2004 Ralf Baechle ++ * Copyright (C) 2004 Maciej W. Rozycki ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License version 2 as published ++ * by the Free Software Foundation. ++ * ++ */ ++#ifndef __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H ++#define __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H ++ ++/* ++ * The Atheros AR531x/AR231x SoCs have MIPS 4Kc/4KEc core. ++ */ ++#define cpu_has_tlb 1 ++#define cpu_has_4kex 1 ++#define cpu_has_3k_cache 0 ++#define cpu_has_4k_cache 1 ++#define cpu_has_tx39_cache 0 ++#define cpu_has_sb1_cache 0 ++#define cpu_has_fpu 0 ++#define cpu_has_32fpr 0 ++#define cpu_has_counter 1 ++#define cpu_has_ejtag 1 ++ ++#if !defined(CONFIG_SOC_AR5312) ++# define cpu_has_llsc 1 ++#else ++/* ++ * The MIPS 4Kc V0.9 core in the AR5312/AR2312 have problems with the ++ * ll/sc instructions. ++ */ ++# define cpu_has_llsc 0 ++#endif ++ ++#define cpu_has_mips16 0 ++#define cpu_has_mdmx 0 ++#define cpu_has_mips3d 0 ++#define cpu_has_smartmips 0 ++ ++#define cpu_has_mips32r1 1 ++ ++#if !defined(CONFIG_SOC_AR5312) ++# define cpu_has_mips32r2 1 ++#endif ++ ++#define cpu_has_mips64r1 0 ++#define cpu_has_mips64r2 0 ++ ++#define cpu_has_dsp 0 ++#define cpu_has_mipsmt 0 ++ ++#define cpu_has_64bits 0 ++#define cpu_has_64bit_zero_reg 0 ++#define cpu_has_64bit_gp_regs 0 ++#define cpu_has_64bit_addresses 0 ++ ++#endif /* __ASM_MACH_ATH25_CPU_FEATURE_OVERRIDES_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath25/dma-coherence.h +@@ -0,0 +1,82 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2006 Ralf Baechle <ralf@linux-mips.org> ++ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org> ++ * ++ */ ++#ifndef __ASM_MACH_ATH25_DMA_COHERENCE_H ++#define __ASM_MACH_ATH25_DMA_COHERENCE_H ++ ++#include <linux/device.h> ++ ++/* ++ * We need some arbitrary non-zero value to be programmed to the BAR1 register ++ * of PCI host controller to enable DMA. The same value should be used as the ++ * offset to calculate the physical address of DMA buffer for PCI devices. ++ */ ++#define AR2315_PCI_HOST_SDRAM_BASEADDR 0x20000000 ++ ++static inline dma_addr_t ath25_dev_offset(struct device *dev) ++{ ++#ifdef CONFIG_PCI ++ extern struct bus_type pci_bus_type; ++ ++ if (dev && dev->bus == &pci_bus_type) ++ return AR2315_PCI_HOST_SDRAM_BASEADDR; ++#endif ++ return 0; ++} ++ ++static inline dma_addr_t ++plat_map_dma_mem(struct device *dev, void *addr, size_t size) ++{ ++ return virt_to_phys(addr) + ath25_dev_offset(dev); ++} ++ ++static inline dma_addr_t ++plat_map_dma_mem_page(struct device *dev, struct page *page) ++{ ++ return page_to_phys(page) + ath25_dev_offset(dev); ++} ++ ++static inline unsigned long ++plat_dma_addr_to_phys(struct device *dev, dma_addr_t dma_addr) ++{ ++ return dma_addr - ath25_dev_offset(dev); ++} ++ ++static inline void ++plat_unmap_dma_mem(struct device *dev, dma_addr_t dma_addr, size_t size, ++ enum dma_data_direction direction) ++{ ++} ++ ++static inline int plat_dma_supported(struct device *dev, u64 mask) ++{ ++ return 1; ++} ++ ++static inline void plat_extra_sync_for_device(struct device *dev) ++{ ++} ++ ++static inline int plat_dma_mapping_error(struct device *dev, ++ dma_addr_t dma_addr) ++{ ++ return 0; ++} ++ ++static inline int plat_device_is_coherent(struct device *dev) ++{ ++#ifdef CONFIG_DMA_COHERENT ++ return 1; ++#endif ++#ifdef CONFIG_DMA_NONCOHERENT ++ return 0; ++#endif ++} ++ ++#endif /* __ASM_MACH_ATH25_DMA_COHERENCE_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath25/gpio.h +@@ -0,0 +1,16 @@ ++#ifndef __ASM_MACH_ATH25_GPIO_H ++#define __ASM_MACH_ATH25_GPIO_H ++ ++#include <asm-generic/gpio.h> ++ ++#define gpio_get_value __gpio_get_value ++#define gpio_set_value __gpio_set_value ++#define gpio_cansleep __gpio_cansleep ++#define gpio_to_irq __gpio_to_irq ++ ++static inline int irq_to_gpio(unsigned irq) ++{ ++ return -EINVAL; ++} ++ ++#endif /* __ASM_MACH_ATH25_GPIO_H */ +--- /dev/null ++++ b/arch/mips/include/asm/mach-ath25/war.h +@@ -0,0 +1,25 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2008 Felix Fietkau <nbd@openwrt.org> ++ */ ++#ifndef __ASM_MACH_ATH25_WAR_H ++#define __ASM_MACH_ATH25_WAR_H ++ ++#define R4600_V1_INDEX_ICACHEOP_WAR 0 ++#define R4600_V1_HIT_CACHEOP_WAR 0 ++#define R4600_V2_HIT_CACHEOP_WAR 0 ++#define R5432_CP0_INTERRUPT_WAR 0 ++#define BCM1250_M3_WAR 0 ++#define SIBYTE_1956_WAR 0 ++#define MIPS4K_ICACHE_REFILL_WAR 0 ++#define MIPS_CACHE_SYNC_WAR 0 ++#define TX49XX_ICACHE_INDEX_INV_WAR 0 ++#define RM9000_CDEX_SMP_WAR 0 ++#define ICACHE_REFILLS_WORKAROUND_WAR 0 ++#define R10000_LLSC_WAR 0 ++#define MIPS34K_MISSED_ITLB_WAR 0 ++ ++#endif /* __ASM_MACH_ATH25_WAR_H */ +--- /dev/null ++++ b/arch/mips/ath25/ar2315_regs.h +@@ -0,0 +1,410 @@ ++/* ++ * Register definitions for AR2315+ ++ * ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006-2008 Felix Fietkau <nbd@openwrt.org> ++ */ ++ ++#ifndef __ASM_MACH_ATH25_AR2315_REGS_H ++#define __ASM_MACH_ATH25_AR2315_REGS_H ++ ++/* ++ * IRQs ++ */ ++#define AR2315_IRQ_MISC (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */ ++#define AR2315_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */ ++#define AR2315_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */ ++#define AR2315_IRQ_LCBUS_PCI (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */ ++#define AR2315_IRQ_WLAN0_POLL (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */ ++ ++/* ++ * Miscellaneous interrupts, which share IP2. ++ */ ++#define AR2315_MISC_IRQ_UART0 0 ++#define AR2315_MISC_IRQ_I2C_RSVD 1 ++#define AR2315_MISC_IRQ_SPI 2 ++#define AR2315_MISC_IRQ_AHB 3 ++#define AR2315_MISC_IRQ_APB 4 ++#define AR2315_MISC_IRQ_TIMER 5 ++#define AR2315_MISC_IRQ_GPIO 6 ++#define AR2315_MISC_IRQ_WATCHDOG 7 ++#define AR2315_MISC_IRQ_IR_RSVD 8 ++#define AR2315_MISC_IRQ_COUNT 9 ++ ++/* ++ * Address map ++ */ ++#define AR2315_SPI_READ_BASE 0x08000000 /* SPI flash */ ++#define AR2315_SPI_READ_SIZE 0x01000000 ++#define AR2315_WLAN0_BASE 0x10000000 /* Wireless MMR */ ++#define AR2315_PCI_BASE 0x10100000 /* PCI MMR */ ++#define AR2315_PCI_SIZE 0x00001000 ++#define AR2315_SDRAMCTL_BASE 0x10300000 /* SDRAM MMR */ ++#define AR2315_SDRAMCTL_SIZE 0x00000020 ++#define AR2315_LOCAL_BASE 0x10400000 /* Local bus MMR */ ++#define AR2315_ENET0_BASE 0x10500000 /* Ethernet MMR */ ++#define AR2315_RST_BASE 0x11000000 /* Reset control MMR */ ++#define AR2315_RST_SIZE 0x00000100 ++#define AR2315_UART0_BASE 0x11100000 /* UART MMR */ ++#define AR2315_SPI_MMR_BASE 0x11300000 /* SPI flash MMR */ ++#define AR2315_SPI_MMR_SIZE 0x00000010 ++#define AR2315_PCI_EXT_BASE 0x80000000 /* PCI external */ ++#define AR2315_PCI_EXT_SIZE 0x40000000 ++ ++/* ++ * Configuration registers ++ */ ++ ++/* Cold reset register */ ++#define AR2315_COLD_RESET 0x0000 ++ ++#define AR2315_RESET_COLD_AHB 0x00000001 ++#define AR2315_RESET_COLD_APB 0x00000002 ++#define AR2315_RESET_COLD_CPU 0x00000004 ++#define AR2315_RESET_COLD_CPUWARM 0x00000008 ++#define AR2315_RESET_SYSTEM (RESET_COLD_CPU |\ ++ RESET_COLD_APB |\ ++ RESET_COLD_AHB) /* full system */ ++#define AR2317_RESET_SYSTEM 0x00000010 ++ ++/* Reset register */ ++#define AR2315_RESET 0x0004 ++ ++#define AR2315_RESET_WARM_WLAN0_MAC 0x00000001 /* warm reset WLAN0 MAC */ ++#define AR2315_RESET_WARM_WLAN0_BB 0x00000002 /* warm reset WLAN0 BB */ ++#define AR2315_RESET_MPEGTS_RSVD 0x00000004 /* warm reset MPEG-TS */ ++#define AR2315_RESET_PCIDMA 0x00000008 /* warm reset PCI ahb/dma */ ++#define AR2315_RESET_MEMCTL 0x00000010 /* warm reset mem control */ ++#define AR2315_RESET_LOCAL 0x00000020 /* warm reset local bus */ ++#define AR2315_RESET_I2C_RSVD 0x00000040 /* warm reset I2C bus */ ++#define AR2315_RESET_SPI 0x00000080 /* warm reset SPI iface */ ++#define AR2315_RESET_UART0 0x00000100 /* warm reset UART0 */ ++#define AR2315_RESET_IR_RSVD 0x00000200 /* warm reset IR iface */ ++#define AR2315_RESET_EPHY0 0x00000400 /* cold reset ENET0 phy */ ++#define AR2315_RESET_ENET0 0x00000800 /* cold reset ENET0 MAC */ ++ ++/* AHB master arbitration control */ ++#define AR2315_AHB_ARB_CTL 0x0008 ++ ++#define AR2315_ARB_CPU 0x00000001 /* CPU, default */ ++#define AR2315_ARB_WLAN 0x00000002 /* WLAN */ ++#define AR2315_ARB_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ ++#define AR2315_ARB_LOCAL 0x00000008 /* Local bus */ ++#define AR2315_ARB_PCI 0x00000010 /* PCI bus */ ++#define AR2315_ARB_ETHERNET 0x00000020 /* Ethernet */ ++#define AR2315_ARB_RETRY 0x00000100 /* Retry policy (debug) */ ++ ++/* Config Register */ ++#define AR2315_ENDIAN_CTL 0x000c ++ ++#define AR2315_CONFIG_AHB 0x00000001 /* EC-AHB bridge endian */ ++#define AR2315_CONFIG_WLAN 0x00000002 /* WLAN byteswap */ ++#define AR2315_CONFIG_MPEGTS_RSVD 0x00000004 /* MPEG-TS byteswap */ ++#define AR2315_CONFIG_PCI 0x00000008 /* PCI byteswap */ ++#define AR2315_CONFIG_MEMCTL 0x00000010 /* Mem controller endian */ ++#define AR2315_CONFIG_LOCAL 0x00000020 /* Local bus byteswap */ ++#define AR2315_CONFIG_ETHERNET 0x00000040 /* Ethernet byteswap */ ++#define AR2315_CONFIG_MERGE 0x00000200 /* CPU write buffer merge */ ++#define AR2315_CONFIG_CPU 0x00000400 /* CPU big endian */ ++#define AR2315_CONFIG_BIG 0x00000400 ++#define AR2315_CONFIG_PCIAHB 0x00000800 ++#define AR2315_CONFIG_PCIAHB_BRIDGE 0x00001000 ++#define AR2315_CONFIG_SPI 0x00008000 /* SPI byteswap */ ++#define AR2315_CONFIG_CPU_DRAM 0x00010000 ++#define AR2315_CONFIG_CPU_PCI 0x00020000 ++#define AR2315_CONFIG_CPU_MMR 0x00040000 ++ ++/* NMI control */ ++#define AR2315_NMI_CTL 0x0010 ++ ++#define AR2315_NMI_EN 1 ++ ++/* Revision Register - Initial value is 0x3010 (WMAC 3.0, AR231X 1.0). */ ++#define AR2315_SREV 0x0014 ++ ++#define AR2315_REV_MAJ 0x000000f0 ++#define AR2315_REV_MAJ_S 4 ++#define AR2315_REV_MIN 0x0000000f ++#define AR2315_REV_MIN_S 0 ++#define AR2315_REV_CHIP (AR2315_REV_MAJ | AR2315_REV_MIN) ++ ++/* Interface Enable */ ++#define AR2315_IF_CTL 0x0018 ++ ++#define AR2315_IF_MASK 0x00000007 ++#define AR2315_IF_DISABLED 0 /* Disable all */ ++#define AR2315_IF_PCI 1 /* PCI */ ++#define AR2315_IF_TS_LOCAL 2 /* Local bus */ ++#define AR2315_IF_ALL 3 /* Emulation only */ ++#define AR2315_IF_LOCAL_HOST 0x00000008 ++#define AR2315_IF_PCI_HOST 0x00000010 ++#define AR2315_IF_PCI_INTR 0x00000020 ++#define AR2315_IF_PCI_CLK_MASK 0x00030000 ++#define AR2315_IF_PCI_CLK_INPUT 0 ++#define AR2315_IF_PCI_CLK_OUTPUT_LOW 1 ++#define AR2315_IF_PCI_CLK_OUTPUT_CLK 2 ++#define AR2315_IF_PCI_CLK_OUTPUT_HIGH 3 ++#define AR2315_IF_PCI_CLK_SHIFT 16 ++ ++/* APB Interrupt control */ ++#define AR2315_ISR 0x0020 ++#define AR2315_IMR 0x0024 ++#define AR2315_GISR 0x0028 ++ ++#define AR2315_ISR_UART0 0x00000001 /* high speed UART */ ++#define AR2315_ISR_I2C_RSVD 0x00000002 /* I2C bus */ ++#define AR2315_ISR_SPI 0x00000004 /* SPI bus */ ++#define AR2315_ISR_AHB 0x00000008 /* AHB error */ ++#define AR2315_ISR_APB 0x00000010 /* APB error */ ++#define AR2315_ISR_TIMER 0x00000020 /* Timer */ ++#define AR2315_ISR_GPIO 0x00000040 /* GPIO */ ++#define AR2315_ISR_WD 0x00000080 /* Watchdog */ ++#define AR2315_ISR_IR_RSVD 0x00000100 /* IR */ ++ ++#define AR2315_GISR_MISC 0x00000001 /* Misc */ ++#define AR2315_GISR_WLAN0 0x00000002 /* WLAN0 */ ++#define AR2315_GISR_MPEGTS_RSVD 0x00000004 /* MPEG-TS */ ++#define AR2315_GISR_LOCALPCI 0x00000008 /* Local/PCI bus */ ++#define AR2315_GISR_WMACPOLL 0x00000010 ++#define AR2315_GISR_TIMER 0x00000020 ++#define AR2315_GISR_ETHERNET 0x00000040 /* Ethernet */ ++ ++/* Generic timer */ ++#define AR2315_TIMER 0x0030 ++#define AR2315_RELOAD 0x0034 ++ ++/* Watchdog timer */ ++#define AR2315_WDT_TIMER 0x0038 ++#define AR2315_WDT_CTRL 0x003c ++ ++#define AR2315_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */ ++#define AR2315_WDT_CTRL_NMI 0x00000001 /* NMI on watchdog */ ++#define AR2315_WDT_CTRL_RESET 0x00000002 /* reset on watchdog */ ++ ++/* CPU Performance Counters */ ++#define AR2315_PERFCNT0 0x0048 ++#define AR2315_PERFCNT1 0x004c ++ ++#define AR2315_PERF0_DATAHIT 0x00000001 /* Count Data Cache Hits */ ++#define AR2315_PERF0_DATAMISS 0x00000002 /* Count Data Cache Misses */ ++#define AR2315_PERF0_INSTHIT 0x00000004 /* Count Instruction Cache Hits */ ++#define AR2315_PERF0_INSTMISS 0x00000008 /* Count Instruction Cache Misses */ ++#define AR2315_PERF0_ACTIVE 0x00000010 /* Count Active Processor Cycles */ ++#define AR2315_PERF0_WBHIT 0x00000020 /* Count CPU Write Buffer Hits */ ++#define AR2315_PERF0_WBMISS 0x00000040 /* Count CPU Write Buffer Misses */ ++ ++#define AR2315_PERF1_EB_ARDY 0x00000001 /* Count EB_ARdy signal */ ++#define AR2315_PERF1_EB_AVALID 0x00000002 /* Count EB_AValid signal */ ++#define AR2315_PERF1_EB_WDRDY 0x00000004 /* Count EB_WDRdy signal */ ++#define AR2315_PERF1_EB_RDVAL 0x00000008 /* Count EB_RdVal signal */ ++#define AR2315_PERF1_VRADDR 0x00000010 /* Count valid read address cycles*/ ++#define AR2315_PERF1_VWADDR 0x00000020 /* Count valid write address cycl.*/ ++#define AR2315_PERF1_VWDATA 0x00000040 /* Count valid write data cycles */ ++ ++/* AHB Error Reporting */ ++#define AR2315_AHB_ERR0 0x0050 /* error */ ++#define AR2315_AHB_ERR1 0x0054 /* haddr */ ++#define AR2315_AHB_ERR2 0x0058 /* hwdata */ ++#define AR2315_AHB_ERR3 0x005c /* hrdata */ ++#define AR2315_AHB_ERR4 0x0060 /* status */ ++ ++#define AR2315_AHB_ERROR_DET 1 /* AHB Error has been detected, */ ++ /* write 1 to clear all bits in ERR0 */ ++#define AR2315_AHB_ERROR_OVR 2 /* AHB Error overflow has been detected */ ++#define AR2315_AHB_ERROR_WDT 4 /* AHB Error due to wdt instead of hresp */ ++ ++#define AR2315_PROCERR_HMAST 0x0000000f ++#define AR2315_PROCERR_HMAST_DFLT 0 ++#define AR2315_PROCERR_HMAST_WMAC 1 ++#define AR2315_PROCERR_HMAST_ENET 2 ++#define AR2315_PROCERR_HMAST_PCIENDPT 3 ++#define AR2315_PROCERR_HMAST_LOCAL 4 ++#define AR2315_PROCERR_HMAST_CPU 5 ++#define AR2315_PROCERR_HMAST_PCITGT 6 ++#define AR2315_PROCERR_HMAST_S 0 ++#define AR2315_PROCERR_HWRITE 0x00000010 ++#define AR2315_PROCERR_HSIZE 0x00000060 ++#define AR2315_PROCERR_HSIZE_S 5 ++#define AR2315_PROCERR_HTRANS 0x00000180 ++#define AR2315_PROCERR_HTRANS_S 7 ++#define AR2315_PROCERR_HBURST 0x00000e00 ++#define AR2315_PROCERR_HBURST_S 9 ++ ++/* Clock Control */ ++#define AR2315_PLLC_CTL 0x0064 ++#define AR2315_PLLV_CTL 0x0068 ++#define AR2315_CPUCLK 0x006c ++#define AR2315_AMBACLK 0x0070 ++#define AR2315_SYNCCLK 0x0074 ++#define AR2315_DSL_SLEEP_CTL 0x0080 ++#define AR2315_DSL_SLEEP_DUR 0x0084 ++ ++/* PLLc Control fields */ ++#define AR2315_PLLC_REF_DIV_M 0x00000003 ++#define AR2315_PLLC_REF_DIV_S 0 ++#define AR2315_PLLC_FDBACK_DIV_M 0x0000007c ++#define AR2315_PLLC_FDBACK_DIV_S 2 ++#define AR2315_PLLC_ADD_FDBACK_DIV_M 0x00000080 ++#define AR2315_PLLC_ADD_FDBACK_DIV_S 7 ++#define AR2315_PLLC_CLKC_DIV_M 0x0001c000 ++#define AR2315_PLLC_CLKC_DIV_S 14 ++#define AR2315_PLLC_CLKM_DIV_M 0x00700000 ++#define AR2315_PLLC_CLKM_DIV_S 20 ++ ++/* CPU CLK Control fields */ ++#define AR2315_CPUCLK_CLK_SEL_M 0x00000003 ++#define AR2315_CPUCLK_CLK_SEL_S 0 ++#define AR2315_CPUCLK_CLK_DIV_M 0x0000000c ++#define AR2315_CPUCLK_CLK_DIV_S 2 ++ ++/* AMBA CLK Control fields */ ++#define AR2315_AMBACLK_CLK_SEL_M 0x00000003 ++#define AR2315_AMBACLK_CLK_SEL_S 0 ++#define AR2315_AMBACLK_CLK_DIV_M 0x0000000c ++#define AR2315_AMBACLK_CLK_DIV_S 2 ++ ++/* PCI Clock Control */ ++#define AR2315_PCICLK 0x00a4 ++ ++#define AR2315_PCICLK_INPUT_M 0x00000003 ++#define AR2315_PCICLK_INPUT_S 0 ++#define AR2315_PCICLK_PLLC_CLKM 0 ++#define AR2315_PCICLK_PLLC_CLKM1 1 ++#define AR2315_PCICLK_PLLC_CLKC 2 ++#define AR2315_PCICLK_REF_CLK 3 ++#define AR2315_PCICLK_DIV_M 0x0000000c ++#define AR2315_PCICLK_DIV_S 2 ++#define AR2315_PCICLK_IN_FREQ 0 ++#define AR2315_PCICLK_IN_FREQ_DIV_6 1 ++#define AR2315_PCICLK_IN_FREQ_DIV_8 2 ++#define AR2315_PCICLK_IN_FREQ_DIV_10 3 ++ ++/* Observation Control Register */ ++#define AR2315_OCR 0x00b0 ++ ++#define AR2315_OCR_GPIO0_IRIN 0x00000040 ++#define AR2315_OCR_GPIO1_IROUT 0x00000080 ++#define AR2315_OCR_GPIO3_RXCLR 0x00000200 ++ ++/* General Clock Control */ ++#define AR2315_MISCCLK 0x00b4 ++ ++#define AR2315_MISCCLK_PLLBYPASS_EN 0x00000001 ++#define AR2315_MISCCLK_PROCREFCLK 0x00000002 ++ ++/* ++ * SDRAM Controller ++ * - No read or write buffers are included. ++ */ ++#define AR2315_MEM_CFG 0x0000 ++#define AR2315_MEM_CTRL 0x000c ++#define AR2315_MEM_REF 0x0010 ++ ++#define AR2315_MEM_CFG_DATA_WIDTH_M 0x00006000 ++#define AR2315_MEM_CFG_DATA_WIDTH_S 13 ++#define AR2315_MEM_CFG_COL_WIDTH_M 0x00001e00 ++#define AR2315_MEM_CFG_COL_WIDTH_S 9 ++#define AR2315_MEM_CFG_ROW_WIDTH_M 0x000001e0 ++#define AR2315_MEM_CFG_ROW_WIDTH_S 5 ++#define AR2315_MEM_CFG_BANKADDR_BITS_M 0x00000018 ++#define AR2315_MEM_CFG_BANKADDR_BITS_S 3 ++ ++/* ++ * Local Bus Interface Registers ++ */ ++#define AR2315_LB_CONFIG 0x0000 ++ ++#define AR2315_LBCONF_OE 0x00000001 /* =1 OE is low-true */ ++#define AR2315_LBCONF_CS0 0x00000002 /* =1 first CS is low-true */ ++#define AR2315_LBCONF_CS1 0x00000004 /* =1 2nd CS is low-true */ ++#define AR2315_LBCONF_RDY 0x00000008 /* =1 RDY is low-true */ ++#define AR2315_LBCONF_WE 0x00000010 /* =1 Write En is low-true */ ++#define AR2315_LBCONF_WAIT 0x00000020 /* =1 WAIT is low-true */ ++#define AR2315_LBCONF_ADS 0x00000040 /* =1 Adr Strobe is low-true */ ++#define AR2315_LBCONF_MOT 0x00000080 /* =0 Intel, =1 Motorola */ ++#define AR2315_LBCONF_8CS 0x00000100 /* =1 8 bits CS, 0= 16bits */ ++#define AR2315_LBCONF_8DS 0x00000200 /* =1 8 bits Data S, 0=16bits */ ++#define AR2315_LBCONF_ADS_EN 0x00000400 /* =1 Enable ADS */ ++#define AR2315_LBCONF_ADR_OE 0x00000800 /* =1 Adr cap on OE, WE or DS */ ++#define AR2315_LBCONF_ADDT_MUX 0x00001000 /* =1 Adr and Data share bus */ ++#define AR2315_LBCONF_DATA_OE 0x00002000 /* =1 Data cap on OE, WE, DS */ ++#define AR2315_LBCONF_16DATA 0x00004000 /* =1 Data is 16 bits wide */ ++#define AR2315_LBCONF_SWAPDT 0x00008000 /* =1 Byte swap data */ ++#define AR2315_LBCONF_SYNC 0x00010000 /* =1 Bus synchronous to clk */ ++#define AR2315_LBCONF_INT 0x00020000 /* =1 Intr is low true */ ++#define AR2315_LBCONF_INT_CTR0 0x00000000 /* GND high-Z, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR1 0x00040000 /* GND drive, Vdd is high-Z */ ++#define AR2315_LBCONF_INT_CTR2 0x00080000 /* GND high-Z, Vdd drive */ ++#define AR2315_LBCONF_INT_CTR3 0x000c0000 /* GND drive, Vdd drive */ ++#define AR2315_LBCONF_RDY_WAIT 0x00100000 /* =1 RDY is negative of WAIT */ ++#define AR2315_LBCONF_INT_PULSE 0x00200000 /* =1 Interrupt is a pulse */ ++#define AR2315_LBCONF_ENABLE 0x00400000 /* =1 Falcon respond to LB */ ++ ++#define AR2315_LB_CLKSEL 0x0004 ++ ++#define AR2315_LBCLK_EXT 0x00000001 /* use external clk for lb */ ++ ++#define AR2315_LB_1MS 0x0008 ++ ++#define AR2315_LB1MS_MASK 0x0003ffff /* # of AHB clk cycles in 1ms */ ++ ++#define AR2315_LB_MISCCFG 0x000c ++ ++#define AR2315_LBM_TXD_EN 0x00000001 /* Enable TXD for fragments */ ++#define AR2315_LBM_RX_INTEN 0x00000002 /* Enable LB ints on RX ready */ ++#define AR2315_LBM_MBOXWR_INTEN 0x00000004 /* Enable LB ints on mbox wr */ ++#define AR2315_LBM_MBOXRD_INTEN 0x00000008 /* Enable LB ints on mbox rd */ ++#define AR2315_LMB_DESCSWAP_EN 0x00000010 /* Byte swap desc enable */ ++#define AR2315_LBM_TIMEOUT_M 0x00ffff80 ++#define AR2315_LBM_TIMEOUT_S 7 ++#define AR2315_LBM_PORTMUX 0x07000000 ++ ++#define AR2315_LB_RXTSOFF 0x0010 ++ ++#define AR2315_LB_TX_CHAIN_EN 0x0100 ++ ++#define AR2315_LB_TXEN_0 0x00000001 ++#define AR2315_LB_TXEN_1 0x00000002 ++#define AR2315_LB_TXEN_2 0x00000004 ++#define AR2315_LB_TXEN_3 0x00000008 ++ ++#define AR2315_LB_TX_CHAIN_DIS 0x0104 ++#define AR2315_LB_TX_DESC_PTR 0x0200 ++ ++#define AR2315_LB_RX_CHAIN_EN 0x0400 ++ ++#define AR2315_LB_RXEN 0x00000001 ++ ++#define AR2315_LB_RX_CHAIN_DIS 0x0404 ++#define AR2315_LB_RX_DESC_PTR 0x0408 ++ ++#define AR2315_LB_INT_STATUS 0x0500 ++ ++#define AR2315_LB_INT_TX_DESC 0x00000001 ++#define AR2315_LB_INT_TX_OK 0x00000002 ++#define AR2315_LB_INT_TX_ERR 0x00000004 ++#define AR2315_LB_INT_TX_EOF 0x00000008 ++#define AR2315_LB_INT_RX_DESC 0x00000010 ++#define AR2315_LB_INT_RX_OK 0x00000020 ++#define AR2315_LB_INT_RX_ERR 0x00000040 ++#define AR2315_LB_INT_RX_EOF 0x00000080 ++#define AR2315_LB_INT_TX_TRUNC 0x00000100 ++#define AR2315_LB_INT_TX_STARVE 0x00000200 ++#define AR2315_LB_INT_LB_TIMEOUT 0x00000400 ++#define AR2315_LB_INT_LB_ERR 0x00000800 ++#define AR2315_LB_INT_MBOX_WR 0x00001000 ++#define AR2315_LB_INT_MBOX_RD 0x00002000 ++ ++/* Bit definitions for INT MASK are the same as INT_STATUS */ ++#define AR2315_LB_INT_MASK 0x0504 ++ ++#define AR2315_LB_INT_EN 0x0508 ++#define AR2315_LB_MBOX 0x0600 ++ ++#endif /* __ASM_MACH_ATH25_AR2315_REGS_H */ +--- /dev/null ++++ b/arch/mips/ath25/ar5312_regs.h +@@ -0,0 +1,224 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> ++ */ ++ ++#ifndef __ASM_MACH_ATH25_AR5312_REGS_H ++#define __ASM_MACH_ATH25_AR5312_REGS_H ++ ++/* ++ * IRQs ++ */ ++#define AR5312_IRQ_WLAN0 (MIPS_CPU_IRQ_BASE + 2) /* C0_CAUSE: 0x0400 */ ++#define AR5312_IRQ_ENET0 (MIPS_CPU_IRQ_BASE + 3) /* C0_CAUSE: 0x0800 */ ++#define AR5312_IRQ_ENET1 (MIPS_CPU_IRQ_BASE + 4) /* C0_CAUSE: 0x1000 */ ++#define AR5312_IRQ_WLAN1 (MIPS_CPU_IRQ_BASE + 5) /* C0_CAUSE: 0x2000 */ ++#define AR5312_IRQ_MISC (MIPS_CPU_IRQ_BASE + 6) /* C0_CAUSE: 0x4000 */ ++ ++/* ++ * Miscellaneous interrupts, which share IP6. ++ */ ++#define AR5312_MISC_IRQ_TIMER 0 ++#define AR5312_MISC_IRQ_AHB_PROC 1 ++#define AR5312_MISC_IRQ_AHB_DMA 2 ++#define AR5312_MISC_IRQ_GPIO 3 ++#define AR5312_MISC_IRQ_UART0 4 ++#define AR5312_MISC_IRQ_UART0_DMA 5 ++#define AR5312_MISC_IRQ_WATCHDOG 6 ++#define AR5312_MISC_IRQ_LOCAL 7 ++#define AR5312_MISC_IRQ_SPI 8 ++#define AR5312_MISC_IRQ_COUNT 9 ++ ++/* ++ * Address Map ++ * ++ * The AR5312 supports 2 enet MACS, even though many reference boards only ++ * actually use 1 of them (i.e. Only MAC 0 is actually connected to an enet ++ * PHY or PHY switch. The AR2312 supports 1 enet MAC. ++ */ ++#define AR5312_WLAN0_BASE 0x18000000 ++#define AR5312_ENET0_BASE 0x18100000 ++#define AR5312_ENET1_BASE 0x18200000 ++#define AR5312_SDRAMCTL_BASE 0x18300000 ++#define AR5312_SDRAMCTL_SIZE 0x00000010 ++#define AR5312_FLASHCTL_BASE 0x18400000 ++#define AR5312_FLASHCTL_SIZE 0x00000010 ++#define AR5312_WLAN1_BASE 0x18500000 ++#define AR5312_UART0_BASE 0x1c000000 /* UART MMR */ ++#define AR5312_GPIO_BASE 0x1c002000 ++#define AR5312_GPIO_SIZE 0x00000010 ++#define AR5312_RST_BASE 0x1c003000 ++#define AR5312_RST_SIZE 0x00000100 ++#define AR5312_FLASH_BASE 0x1e000000 ++#define AR5312_FLASH_SIZE 0x00800000 ++ ++/* ++ * Need these defines to determine true number of ethernet MACs ++ */ ++#define AR5312_AR5312_REV2 0x0052 /* AR5312 WMAC (AP31) */ ++#define AR5312_AR5312_REV7 0x0057 /* AR5312 WMAC (AP30-040) */ ++#define AR5312_AR2313_REV8 0x0058 /* AR2313 WMAC (AP43-030) */ ++ ++/* Reset/Timer Block Address Map */ ++#define AR5312_TIMER 0x0000 /* countdown timer */ ++#define AR5312_RELOAD 0x0004 /* timer reload value */ ++#define AR5312_WDT_CTRL 0x0008 /* watchdog cntrl */ ++#define AR5312_WDT_TIMER 0x000c /* watchdog timer */ ++#define AR5312_ISR 0x0010 /* Intr Status Reg */ ++#define AR5312_IMR 0x0014 /* Intr Mask Reg */ ++#define AR5312_RESET 0x0020 ++#define AR5312_CLOCKCTL1 0x0064 ++#define AR5312_SCRATCH 0x006c ++#define AR5312_PROCADDR 0x0070 ++#define AR5312_PROC1 0x0074 ++#define AR5312_DMAADDR 0x0078 ++#define AR5312_DMA1 0x007c ++#define AR5312_ENABLE 0x0080 /* interface enb */ ++#define AR5312_REV 0x0090 /* revision */ ++ ++/* AR5312_WDT_CTRL register bit field definitions */ ++#define AR5312_WDT_CTRL_IGNORE 0x00000000 /* ignore expiration */ ++#define AR5312_WDT_CTRL_NMI 0x00000001 ++#define AR5312_WDT_CTRL_RESET 0x00000002 ++ ++/* AR5312_ISR register bit field definitions */ ++#define AR5312_ISR_TIMER 0x00000001 ++#define AR5312_ISR_AHBPROC 0x00000002 ++#define AR5312_ISR_AHBDMA 0x00000004 ++#define AR5312_ISR_GPIO 0x00000008 ++#define AR5312_ISR_UART0 0x00000010 ++#define AR5312_ISR_UART0DMA 0x00000020 ++#define AR5312_ISR_WD 0x00000040 ++#define AR5312_ISR_LOCAL 0x00000080 ++ ++/* AR5312_RESET register bit field definitions */ ++#define AR5312_RESET_SYSTEM 0x00000001 /* cold reset full system */ ++#define AR5312_RESET_PROC 0x00000002 /* cold reset MIPS core */ ++#define AR5312_RESET_WLAN0 0x00000004 /* cold reset WLAN MAC/BB */ ++#define AR5312_RESET_EPHY0 0x00000008 /* cold reset ENET0 phy */ ++#define AR5312_RESET_EPHY1 0x00000010 /* cold reset ENET1 phy */ ++#define AR5312_RESET_ENET0 0x00000020 /* cold reset ENET0 MAC */ ++#define AR5312_RESET_ENET1 0x00000040 /* cold reset ENET1 MAC */ ++#define AR5312_RESET_UART0 0x00000100 /* cold reset UART0 */ ++#define AR5312_RESET_WLAN1 0x00000200 /* cold reset WLAN MAC/BB */ ++#define AR5312_RESET_APB 0x00000400 /* cold reset APB ar5312 */ ++#define AR5312_RESET_WARM_PROC 0x00001000 /* warm reset MIPS core */ ++#define AR5312_RESET_WARM_WLAN0_MAC 0x00002000 /* warm reset WLAN0 MAC */ ++#define AR5312_RESET_WARM_WLAN0_BB 0x00004000 /* warm reset WLAN0 BB */ ++#define AR5312_RESET_NMI 0x00010000 /* send an NMI to the CPU */ ++#define AR5312_RESET_WARM_WLAN1_MAC 0x00020000 /* warm reset WLAN1 MAC */ ++#define AR5312_RESET_WARM_WLAN1_BB 0x00040000 /* warm reset WLAN1 BB */ ++#define AR5312_RESET_LOCAL_BUS 0x00080000 /* reset local bus */ ++#define AR5312_RESET_WDOG 0x00100000 /* last reset was a wdt */ ++ ++#define AR5312_RESET_WMAC0_BITS (AR5312_RESET_WLAN0 |\ ++ AR5312_RESET_WARM_WLAN0_MAC |\ ++ AR5312_RESET_WARM_WLAN0_BB) ++ ++#define AR5312_RESET_WMAC1_BITS (AR5312_RESET_WLAN1 |\ ++ AR5312_RESET_WARM_WLAN1_MAC |\ ++ AR5312_RESET_WARM_WLAN1_BB) ++ ++/* AR5312_CLOCKCTL1 register bit field definitions */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR5312 and AR2312 */ ++#define AR5312_CLOCKCTL1_PREDIVIDE_MASK 0x00000030 ++#define AR5312_CLOCKCTL1_PREDIVIDE_SHIFT 4 ++#define AR5312_CLOCKCTL1_MULTIPLIER_MASK 0x00001f00 ++#define AR5312_CLOCKCTL1_MULTIPLIER_SHIFT 8 ++#define AR5312_CLOCKCTL1_DOUBLER_MASK 0x00010000 ++ ++/* Valid for AR2313 */ ++#define AR2313_CLOCKCTL1_PREDIVIDE_MASK 0x00003000 ++#define AR2313_CLOCKCTL1_PREDIVIDE_SHIFT 12 ++#define AR2313_CLOCKCTL1_MULTIPLIER_MASK 0x001f0000 ++#define AR2313_CLOCKCTL1_MULTIPLIER_SHIFT 16 ++#define AR2313_CLOCKCTL1_DOUBLER_MASK 0x00000000 ++ ++/* AR5312_ENABLE register bit field definitions */ ++#define AR5312_ENABLE_WLAN0 0x00000001 ++#define AR5312_ENABLE_ENET0 0x00000002 ++#define AR5312_ENABLE_ENET1 0x00000004 ++#define AR5312_ENABLE_UART_AND_WLAN1_PIO 0x00000008/* UART & WLAN1 PIO */ ++#define AR5312_ENABLE_WLAN1_DMA 0x00000010/* WLAN1 DMAs */ ++#define AR5312_ENABLE_WLAN1 (AR5312_ENABLE_UART_AND_WLAN1_PIO |\ ++ AR5312_ENABLE_WLAN1_DMA) ++ ++/* AR5312_REV register bit field definitions */ ++#define AR5312_REV_WMAC_MAJ 0x0000f000 ++#define AR5312_REV_WMAC_MAJ_S 12 ++#define AR5312_REV_WMAC_MIN 0x00000f00 ++#define AR5312_REV_WMAC_MIN_S 8 ++#define AR5312_REV_MAJ 0x000000f0 ++#define AR5312_REV_MAJ_S 4 ++#define AR5312_REV_MIN 0x0000000f ++#define AR5312_REV_MIN_S 0 ++#define AR5312_REV_CHIP (AR5312_REV_MAJ|AR5312_REV_MIN) ++ ++/* Major revision numbers, bits 7..4 of Revision ID register */ ++#define AR5312_REV_MAJ_AR5312 0x4 ++#define AR5312_REV_MAJ_AR2313 0x5 ++ ++/* Minor revision numbers, bits 3..0 of Revision ID register */ ++#define AR5312_REV_MIN_DUAL 0x0 /* Dual WLAN version */ ++#define AR5312_REV_MIN_SINGLE 0x1 /* Single WLAN version */ ++ ++/* ++ * ARM Flash Controller -- 3 flash banks with either x8 or x16 devices ++ */ ++#define AR5312_FLASHCTL0 0x0000 ++#define AR5312_FLASHCTL1 0x0004 ++#define AR5312_FLASHCTL2 0x0008 ++ ++/* AR5312_FLASHCTL register bit field definitions */ ++#define AR5312_FLASHCTL_IDCY 0x0000000f /* Idle cycle turnaround time */ ++#define AR5312_FLASHCTL_IDCY_S 0 ++#define AR5312_FLASHCTL_WST1 0x000003e0 /* Wait state 1 */ ++#define AR5312_FLASHCTL_WST1_S 5 ++#define AR5312_FLASHCTL_RBLE 0x00000400 /* Read byte lane enable */ ++#define AR5312_FLASHCTL_WST2 0x0000f800 /* Wait state 2 */ ++#define AR5312_FLASHCTL_WST2_S 11 ++#define AR5312_FLASHCTL_AC 0x00070000 /* Flash addr check (added) */ ++#define AR5312_FLASHCTL_AC_S 16 ++#define AR5312_FLASHCTL_AC_128K 0x00000000 ++#define AR5312_FLASHCTL_AC_256K 0x00010000 ++#define AR5312_FLASHCTL_AC_512K 0x00020000 ++#define AR5312_FLASHCTL_AC_1M 0x00030000 ++#define AR5312_FLASHCTL_AC_2M 0x00040000 ++#define AR5312_FLASHCTL_AC_4M 0x00050000 ++#define AR5312_FLASHCTL_AC_8M 0x00060000 ++#define AR5312_FLASHCTL_AC_RES 0x00070000 /* 16MB is not supported */ ++#define AR5312_FLASHCTL_E 0x00080000 /* Flash bank enable (added) */ ++#define AR5312_FLASHCTL_BUSERR 0x01000000 /* Bus transfer error flag */ ++#define AR5312_FLASHCTL_WPERR 0x02000000 /* Write protect error flag */ ++#define AR5312_FLASHCTL_WP 0x04000000 /* Write protect */ ++#define AR5312_FLASHCTL_BM 0x08000000 /* Burst mode */ ++#define AR5312_FLASHCTL_MW 0x30000000 /* Mem width */ ++#define AR5312_FLASHCTL_MW8 0x00000000 /* Mem width x8 */ ++#define AR5312_FLASHCTL_MW16 0x10000000 /* Mem width x16 */ ++#define AR5312_FLASHCTL_MW32 0x20000000 /* Mem width x32 (not supp) */ ++#define AR5312_FLASHCTL_ATNR 0x00000000 /* Access == no retry */ ++#define AR5312_FLASHCTL_ATR 0x80000000 /* Access == retry every */ ++#define AR5312_FLASHCTL_ATR4 0xc0000000 /* Access == retry every 4 */ ++ ++/* ++ * ARM SDRAM Controller -- just enough to determine memory size ++ */ ++#define AR5312_MEM_CFG1 0x0004 ++ ++#define AR5312_MEM_CFG1_AC0_M 0x00000700 /* bank 0: SDRAM addr check */ ++#define AR5312_MEM_CFG1_AC0_S 8 ++#define AR5312_MEM_CFG1_AC1_M 0x00007000 /* bank 1: SDRAM addr check */ ++#define AR5312_MEM_CFG1_AC1_S 12 ++ ++#endif /* __ASM_MACH_ATH25_AR5312_REGS_H */ +--- /dev/null ++++ b/arch/mips/ath25/ar5312.c +@@ -0,0 +1,393 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006-2009 Felix Fietkau <nbd@openwrt.org> ++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> ++ */ ++ ++/* ++ * Platform devices for Atheros AR5312 SoCs ++ */ ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/bitops.h> ++#include <linux/irqdomain.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/mtd/physmap.h> ++#include <linux/reboot.h> ++#include <asm/bootinfo.h> ++#include <asm/reboot.h> ++#include <asm/time.h> ++ ++#include <ath25_platform.h> ++ ++#include "devices.h" ++#include "ar5312.h" ++#include "ar5312_regs.h" ++ ++static void __iomem *ar5312_rst_base; ++static struct irq_domain *ar5312_misc_irq_domain; ++ ++static inline u32 ar5312_rst_reg_read(u32 reg) ++{ ++ return __raw_readl(ar5312_rst_base + reg); ++} ++ ++static inline void ar5312_rst_reg_write(u32 reg, u32 val) ++{ ++ __raw_writel(val, ar5312_rst_base + reg); ++} ++ ++static inline void ar5312_rst_reg_mask(u32 reg, u32 mask, u32 val) ++{ ++ u32 ret = ar5312_rst_reg_read(reg); ++ ++ ret &= ~mask; ++ ret |= val; ++ ar5312_rst_reg_write(reg, ret); ++} ++ ++static irqreturn_t ar5312_ahb_err_handler(int cpl, void *dev_id) ++{ ++ u32 proc1 = ar5312_rst_reg_read(AR5312_PROC1); ++ u32 proc_addr = ar5312_rst_reg_read(AR5312_PROCADDR); /* clears error */ ++ u32 dma1 = ar5312_rst_reg_read(AR5312_DMA1); ++ u32 dma_addr = ar5312_rst_reg_read(AR5312_DMAADDR); /* clears error */ ++ ++ pr_emerg("AHB interrupt: PROCADDR=0x%8.8x PROC1=0x%8.8x DMAADDR=0x%8.8x DMA1=0x%8.8x\n", ++ proc_addr, proc1, dma_addr, dma1); ++ ++ machine_restart("AHB error"); /* Catastrophic failure */ ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction ar5312_ahb_err_interrupt = { ++ .handler = ar5312_ahb_err_handler, ++ .name = "ar5312-ahb-error", ++}; ++ ++static void ar5312_misc_irq_handler(unsigned irq, struct irq_desc *desc) ++{ ++ u32 pending = ar5312_rst_reg_read(AR5312_ISR) & ++ ar5312_rst_reg_read(AR5312_IMR); ++ unsigned nr, misc_irq = 0; ++ ++ if (pending) { ++ struct irq_domain *domain = irq_get_handler_data(irq); ++ ++ nr = __ffs(pending); ++ misc_irq = irq_find_mapping(domain, nr); ++ } ++ ++ if (misc_irq) { ++ generic_handle_irq(misc_irq); ++ if (nr == AR5312_MISC_IRQ_TIMER) ++ ar5312_rst_reg_read(AR5312_TIMER); ++ } else { ++ spurious_interrupt(); ++ } ++} ++ ++/* Enable the specified AR5312_MISC_IRQ interrupt */ ++static void ar5312_misc_irq_unmask(struct irq_data *d) ++{ ++ ar5312_rst_reg_mask(AR5312_IMR, 0, BIT(d->hwirq)); ++} ++ ++/* Disable the specified AR5312_MISC_IRQ interrupt */ ++static void ar5312_misc_irq_mask(struct irq_data *d) ++{ ++ ar5312_rst_reg_mask(AR5312_IMR, BIT(d->hwirq), 0); ++ ar5312_rst_reg_read(AR5312_IMR); /* flush write buffer */ ++} ++ ++static struct irq_chip ar5312_misc_irq_chip = { ++ .name = "ar5312-misc", ++ .irq_unmask = ar5312_misc_irq_unmask, ++ .irq_mask = ar5312_misc_irq_mask, ++}; ++ ++static int ar5312_misc_irq_map(struct irq_domain *d, unsigned irq, ++ irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(irq, &ar5312_misc_irq_chip, handle_level_irq); ++ return 0; ++} ++ ++static struct irq_domain_ops ar5312_misc_irq_domain_ops = { ++ .map = ar5312_misc_irq_map, ++}; ++ ++static void ar5312_irq_dispatch(void) ++{ ++ u32 pending = read_c0_status() & read_c0_cause(); ++ ++ if (pending & CAUSEF_IP2) ++ do_IRQ(AR5312_IRQ_WLAN0); ++ else if (pending & CAUSEF_IP5) ++ do_IRQ(AR5312_IRQ_WLAN1); ++ else if (pending & CAUSEF_IP6) ++ do_IRQ(AR5312_IRQ_MISC); ++ else if (pending & CAUSEF_IP7) ++ do_IRQ(ATH25_IRQ_CPU_CLOCK); ++ else ++ spurious_interrupt(); ++} ++ ++void __init ar5312_arch_init_irq(void) ++{ ++ struct irq_domain *domain; ++ unsigned irq; ++ ++ ath25_irq_dispatch = ar5312_irq_dispatch; ++ ++ domain = irq_domain_add_linear(NULL, AR5312_MISC_IRQ_COUNT, ++ &ar5312_misc_irq_domain_ops, NULL); ++ if (!domain) ++ panic("Failed to add IRQ domain"); ++ ++ irq = irq_create_mapping(domain, AR5312_MISC_IRQ_AHB_PROC); ++ setup_irq(irq, &ar5312_ahb_err_interrupt); ++ ++ irq_set_chained_handler(AR5312_IRQ_MISC, ar5312_misc_irq_handler); ++ irq_set_handler_data(AR5312_IRQ_MISC, domain); ++ ++ ar5312_misc_irq_domain = domain; ++} ++ ++static struct physmap_flash_data ar5312_flash_data = { ++ .width = 2, ++}; ++ ++static struct resource ar5312_flash_resource = { ++ .start = AR5312_FLASH_BASE, ++ .end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1, ++ .flags = IORESOURCE_MEM, ++}; ++ ++static struct platform_device ar5312_physmap_flash = { ++ .name = "physmap-flash", ++ .id = 0, ++ .dev.platform_data = &ar5312_flash_data, ++ .resource = &ar5312_flash_resource, ++ .num_resources = 1, ++}; ++ ++static void __init ar5312_flash_init(void) ++{ ++ void __iomem *flashctl_base; ++ u32 ctl; ++ ++ flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE, ++ AR5312_FLASHCTL_SIZE); ++ ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0); ++ ctl &= AR5312_FLASHCTL_MW; ++ ++ /* fixup flash width */ ++ switch (ctl) { ++ case AR5312_FLASHCTL_MW16: ++ ar5312_flash_data.width = 2; ++ break; ++ case AR5312_FLASHCTL_MW8: ++ default: ++ ar5312_flash_data.width = 1; ++ break; ++ } ++ ++ /* ++ * Configure flash bank 0. ++ * Assume 8M window size. Flash will be aliased if it's smaller ++ */ ++ ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE; ++ ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S; ++ ctl |= 0x07 << AR5312_FLASHCTL_WST1_S; ++ ctl |= 0x07 << AR5312_FLASHCTL_WST2_S; ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL0); ++ ++ /* Disable other flash banks */ ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL1); ++ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL1); ++ ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL2); ++ ctl &= ~(AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC); ++ __raw_writel(ctl, flashctl_base + AR5312_FLASHCTL2); ++ ++ iounmap(flashctl_base); ++} ++ ++void __init ar5312_init_devices(void) ++{ ++ struct ath25_boarddata *config; ++ ++ ar5312_flash_init(); ++ ++ /* Locate board/radio config data */ ++ ath25_find_config(AR5312_FLASH_BASE, AR5312_FLASH_SIZE); ++ config = ath25_board.config; ++ ++ /* AR2313 has CPU minor rev. 10 */ ++ if ((current_cpu_data.processor_id & 0xff) == 0x0a) ++ ath25_soc = ATH25_SOC_AR2313; ++ ++ /* AR2312 shares the same Silicon ID as AR5312 */ ++ else if (config->flags & BD_ISCASPER) ++ ath25_soc = ATH25_SOC_AR2312; ++ ++ /* Everything else is probably AR5312 or compatible */ ++ else ++ ath25_soc = ATH25_SOC_AR5312; ++ ++ platform_device_register(&ar5312_physmap_flash); ++ ++ switch (ath25_soc) { ++ case ATH25_SOC_AR5312: ++ if (!ath25_board.radio) ++ return; ++ ++ if (!(config->flags & BD_WLAN0)) ++ break; ++ ++ ath25_add_wmac(0, AR5312_WLAN0_BASE, AR5312_IRQ_WLAN0); ++ break; ++ case ATH25_SOC_AR2312: ++ case ATH25_SOC_AR2313: ++ if (!ath25_board.radio) ++ return; ++ break; ++ default: ++ break; ++ } ++ ++ if (config->flags & BD_WLAN1) ++ ath25_add_wmac(1, AR5312_WLAN1_BASE, AR5312_IRQ_WLAN1); ++} ++ ++static void ar5312_restart(char *command) ++{ ++ /* reset the system */ ++ local_irq_disable(); ++ while (1) ++ ar5312_rst_reg_write(AR5312_RESET, AR5312_RESET_SYSTEM); ++} ++ ++/* ++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register ++ * to determine the predevisor value. ++ */ ++static unsigned clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; ++ ++static unsigned __init ar5312_cpu_frequency(void) ++{ ++ u32 scratch, devid, clock_ctl1; ++ u32 predivide_mask, multiplier_mask, doubler_mask; ++ unsigned predivide_shift, multiplier_shift; ++ unsigned predivide_select, predivisor, multiplier; ++ ++ /* Trust the bootrom's idea of cpu frequency. */ ++ scratch = ar5312_rst_reg_read(AR5312_SCRATCH); ++ if (scratch) ++ return scratch; ++ ++ devid = ar5312_rst_reg_read(AR5312_REV); ++ devid = (devid & AR5312_REV_MAJ) >> AR5312_REV_MAJ_S; ++ if (devid == AR5312_REV_MAJ_AR2313) { ++ predivide_mask = AR2313_CLOCKCTL1_PREDIVIDE_MASK; ++ predivide_shift = AR2313_CLOCKCTL1_PREDIVIDE_SHIFT; ++ multiplier_mask = AR2313_CLOCKCTL1_MULTIPLIER_MASK; ++ multiplier_shift = AR2313_CLOCKCTL1_MULTIPLIER_SHIFT; ++ doubler_mask = AR2313_CLOCKCTL1_DOUBLER_MASK; ++ } else { /* AR5312 and AR2312 */ ++ predivide_mask = AR5312_CLOCKCTL1_PREDIVIDE_MASK; ++ predivide_shift = AR5312_CLOCKCTL1_PREDIVIDE_SHIFT; ++ multiplier_mask = AR5312_CLOCKCTL1_MULTIPLIER_MASK; ++ multiplier_shift = AR5312_CLOCKCTL1_MULTIPLIER_SHIFT; ++ doubler_mask = AR5312_CLOCKCTL1_DOUBLER_MASK; ++ } ++ ++ /* ++ * Clocking is derived from a fixed 40MHz input clock. ++ * ++ * cpu_freq = input_clock * MULT (where MULT is PLL multiplier) ++ * sys_freq = cpu_freq / 4 (used for APB clock, serial, ++ * flash, Timer, Watchdog Timer) ++ * ++ * cnt_freq = cpu_freq / 2 (use for CPU count/compare) ++ * ++ * So, for example, with a PLL multiplier of 5, we have ++ * ++ * cpu_freq = 200MHz ++ * sys_freq = 50MHz ++ * cnt_freq = 100MHz ++ * ++ * We compute the CPU frequency, based on PLL settings. ++ */ ++ ++ clock_ctl1 = ar5312_rst_reg_read(AR5312_CLOCKCTL1); ++ predivide_select = (clock_ctl1 & predivide_mask) >> predivide_shift; ++ predivisor = clockctl1_predivide_table[predivide_select]; ++ multiplier = (clock_ctl1 & multiplier_mask) >> multiplier_shift; ++ ++ if (clock_ctl1 & doubler_mask) ++ multiplier <<= 1; ++ ++ return (40000000 / predivisor) * multiplier; ++} ++ ++static inline unsigned ar5312_sys_frequency(void) ++{ ++ return ar5312_cpu_frequency() / 4; ++} ++ ++void __init ar5312_plat_time_init(void) ++{ ++ mips_hpt_frequency = ar5312_cpu_frequency() / 2; ++} ++ ++void __init ar5312_plat_mem_setup(void) ++{ ++ void __iomem *sdram_base; ++ u32 memsize, memcfg, bank0_ac, bank1_ac; ++ u32 devid; ++ ++ /* Detect memory size */ ++ sdram_base = ioremap_nocache(AR5312_SDRAMCTL_BASE, ++ AR5312_SDRAMCTL_SIZE); ++ memcfg = __raw_readl(sdram_base + AR5312_MEM_CFG1); ++ bank0_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC0); ++ bank1_ac = ATH25_REG_MS(memcfg, AR5312_MEM_CFG1_AC1); ++ memsize = (bank0_ac ? (1 << (bank0_ac + 1)) : 0) + ++ (bank1_ac ? (1 << (bank1_ac + 1)) : 0); ++ memsize <<= 20; ++ add_memory_region(0, memsize, BOOT_MEM_RAM); ++ iounmap(sdram_base); ++ ++ ar5312_rst_base = ioremap_nocache(AR5312_RST_BASE, AR5312_RST_SIZE); ++ ++ devid = ar5312_rst_reg_read(AR5312_REV); ++ devid >>= AR5312_REV_WMAC_MIN_S; ++ devid &= AR5312_REV_CHIP; ++ ath25_board.devid = (u16)devid; ++ ++ /* Clear any lingering AHB errors */ ++ ar5312_rst_reg_read(AR5312_PROCADDR); ++ ar5312_rst_reg_read(AR5312_DMAADDR); ++ ar5312_rst_reg_write(AR5312_WDT_CTRL, AR5312_WDT_CTRL_IGNORE); ++ ++ _machine_restart = ar5312_restart; ++} ++ ++void __init ar5312_arch_init(void) ++{ ++ unsigned irq = irq_create_mapping(ar5312_misc_irq_domain, ++ AR5312_MISC_IRQ_UART0); ++ ++ ath25_serial_setup(AR5312_UART0_BASE, irq, ar5312_sys_frequency()); ++} +--- /dev/null ++++ b/arch/mips/ath25/ar2315.c +@@ -0,0 +1,308 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org> ++ * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org> ++ * Copyright (C) 2012 Alexandros C. Couloumbis <alex@ozo.com> ++ */ ++ ++/* ++ * Platform devices for Atheros AR2315 SoCs ++ */ ++ ++#include <linux/init.h> ++#include <linux/kernel.h> ++#include <linux/bitops.h> ++#include <linux/irqdomain.h> ++#include <linux/interrupt.h> ++#include <linux/platform_device.h> ++#include <linux/reboot.h> ++#include <asm/bootinfo.h> ++#include <asm/reboot.h> ++#include <asm/time.h> ++ ++#include <ath25_platform.h> ++ ++#include "devices.h" ++#include "ar2315.h" ++#include "ar2315_regs.h" ++ ++static void __iomem *ar2315_rst_base; ++static struct irq_domain *ar2315_misc_irq_domain; ++ ++static inline u32 ar2315_rst_reg_read(u32 reg) ++{ ++ return __raw_readl(ar2315_rst_base + reg); ++} ++ ++static inline void ar2315_rst_reg_write(u32 reg, u32 val) ++{ ++ __raw_writel(val, ar2315_rst_base + reg); ++} ++ ++static inline void ar2315_rst_reg_mask(u32 reg, u32 mask, u32 val) ++{ ++ u32 ret = ar2315_rst_reg_read(reg); ++ ++ ret &= ~mask; ++ ret |= val; ++ ar2315_rst_reg_write(reg, ret); ++} ++ ++static irqreturn_t ar2315_ahb_err_handler(int cpl, void *dev_id) ++{ ++ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET); ++ ar2315_rst_reg_read(AR2315_AHB_ERR1); ++ ++ pr_emerg("AHB fatal error\n"); ++ machine_restart("AHB error"); /* Catastrophic failure */ ++ ++ return IRQ_HANDLED; ++} ++ ++static struct irqaction ar2315_ahb_err_interrupt = { ++ .handler = ar2315_ahb_err_handler, ++ .name = "ar2315-ahb-error", ++}; ++ ++static void ar2315_misc_irq_handler(unsigned irq, struct irq_desc *desc) ++{ ++ u32 pending = ar2315_rst_reg_read(AR2315_ISR) & ++ ar2315_rst_reg_read(AR2315_IMR); ++ unsigned nr, misc_irq = 0; ++ ++ if (pending) { ++ struct irq_domain *domain = irq_get_handler_data(irq); ++ ++ nr = __ffs(pending); ++ misc_irq = irq_find_mapping(domain, nr); ++ } ++ ++ if (misc_irq) { ++ if (nr == AR2315_MISC_IRQ_GPIO) ++ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_GPIO); ++ else if (nr == AR2315_MISC_IRQ_WATCHDOG) ++ ar2315_rst_reg_write(AR2315_ISR, AR2315_ISR_WD); ++ generic_handle_irq(misc_irq); ++ } else { ++ spurious_interrupt(); ++ } ++} ++ ++static void ar2315_misc_irq_unmask(struct irq_data *d) ++{ ++ ar2315_rst_reg_mask(AR2315_IMR, 0, BIT(d->hwirq)); ++} ++ ++static void ar2315_misc_irq_mask(struct irq_data *d) ++{ ++ ar2315_rst_reg_mask(AR2315_IMR, BIT(d->hwirq), 0); ++} ++ ++static struct irq_chip ar2315_misc_irq_chip = { ++ .name = "ar2315-misc", ++ .irq_unmask = ar2315_misc_irq_unmask, ++ .irq_mask = ar2315_misc_irq_mask, ++}; ++ ++static int ar2315_misc_irq_map(struct irq_domain *d, unsigned irq, ++ irq_hw_number_t hw) ++{ ++ irq_set_chip_and_handler(irq, &ar2315_misc_irq_chip, handle_level_irq); ++ return 0; ++} ++ ++static struct irq_domain_ops ar2315_misc_irq_domain_ops = { ++ .map = ar2315_misc_irq_map, ++}; ++ ++/* ++ * Called when an interrupt is received, this function ++ * determines exactly which interrupt it was, and it ++ * invokes the appropriate handler. ++ * ++ * Implicitly, we also define interrupt priority by ++ * choosing which to dispatch first. ++ */ ++static void ar2315_irq_dispatch(void) ++{ ++ u32 pending = read_c0_status() & read_c0_cause(); ++ ++ if (pending & CAUSEF_IP3) ++ do_IRQ(AR2315_IRQ_WLAN0); ++ else if (pending & CAUSEF_IP2) ++ do_IRQ(AR2315_IRQ_MISC); ++ else if (pending & CAUSEF_IP7) ++ do_IRQ(ATH25_IRQ_CPU_CLOCK); ++ else ++ spurious_interrupt(); ++} ++ ++void __init ar2315_arch_init_irq(void) ++{ ++ struct irq_domain *domain; ++ unsigned irq; ++ ++ ath25_irq_dispatch = ar2315_irq_dispatch; ++ ++ domain = irq_domain_add_linear(NULL, AR2315_MISC_IRQ_COUNT, ++ &ar2315_misc_irq_domain_ops, NULL); ++ if (!domain) ++ panic("Failed to add IRQ domain"); ++ ++ irq = irq_create_mapping(domain, AR2315_MISC_IRQ_AHB); ++ setup_irq(irq, &ar2315_ahb_err_interrupt); ++ ++ irq_set_chained_handler(AR2315_IRQ_MISC, ar2315_misc_irq_handler); ++ irq_set_handler_data(AR2315_IRQ_MISC, domain); ++ ++ ar2315_misc_irq_domain = domain; ++} ++ ++void __init ar2315_init_devices(void) ++{ ++ /* Find board configuration */ ++ ath25_find_config(AR2315_SPI_READ_BASE, AR2315_SPI_READ_SIZE); ++ ++ ath25_add_wmac(0, AR2315_WLAN0_BASE, AR2315_IRQ_WLAN0); ++} ++ ++static void ar2315_restart(char *command) ++{ ++ void (*mips_reset_vec)(void) = (void *)0xbfc00000; ++ ++ local_irq_disable(); ++ ++ /* try reset the system via reset control */ ++ ar2315_rst_reg_write(AR2315_COLD_RESET, AR2317_RESET_SYSTEM); ++ ++ /* Cold reset does not work on the AR2315/6, use the GPIO reset bits ++ * a workaround. Give it some time to attempt a gpio based hardware ++ * reset (atheros reference design workaround) */ ++ ++ /* TODO: implement the GPIO reset workaround */ ++ ++ /* Some boards (e.g. Senao EOC-2610) don't implement the reset logic ++ * workaround. Attempt to jump to the mips reset location - ++ * the boot loader itself might be able to recover the system */ ++ mips_reset_vec(); ++} ++ ++/* ++ * This table is indexed by bits 5..4 of the CLOCKCTL1 register ++ * to determine the predevisor value. ++ */ ++static int clockctl1_predivide_table[4] __initdata = { 1, 2, 4, 5 }; ++static int pllc_divide_table[5] __initdata = { 2, 3, 4, 6, 3 }; ++ ++static unsigned __init ar2315_sys_clk(u32 clock_ctl) ++{ ++ unsigned int pllc_ctrl, cpu_div; ++ unsigned int pllc_out, refdiv, fdiv, divby2; ++ unsigned int clk_div; ++ ++ pllc_ctrl = ar2315_rst_reg_read(AR2315_PLLC_CTL); ++ refdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_REF_DIV); ++ refdiv = clockctl1_predivide_table[refdiv]; ++ fdiv = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_FDBACK_DIV); ++ divby2 = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_ADD_FDBACK_DIV) + 1; ++ pllc_out = (40000000 / refdiv) * (2 * divby2) * fdiv; ++ ++ /* clkm input selected */ ++ switch (clock_ctl & AR2315_CPUCLK_CLK_SEL_M) { ++ case 0: ++ case 1: ++ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKM_DIV); ++ clk_div = pllc_divide_table[clk_div]; ++ break; ++ case 2: ++ clk_div = ATH25_REG_MS(pllc_ctrl, AR2315_PLLC_CLKC_DIV); ++ clk_div = pllc_divide_table[clk_div]; ++ break; ++ default: ++ pllc_out = 40000000; ++ clk_div = 1; ++ break; ++ } ++ ++ cpu_div = ATH25_REG_MS(clock_ctl, AR2315_CPUCLK_CLK_DIV); ++ cpu_div = cpu_div * 2 ?: 1; ++ ++ return pllc_out / (clk_div * cpu_div); ++} ++ ++static inline unsigned ar2315_cpu_frequency(void) ++{ ++ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_CPUCLK)); ++} ++ ++static inline unsigned ar2315_apb_frequency(void) ++{ ++ return ar2315_sys_clk(ar2315_rst_reg_read(AR2315_AMBACLK)); ++} ++ ++void __init ar2315_plat_time_init(void) ++{ ++ mips_hpt_frequency = ar2315_cpu_frequency() / 2; ++} ++ ++void __init ar2315_plat_mem_setup(void) ++{ ++ void __iomem *sdram_base; ++ u32 memsize, memcfg; ++ u32 devid; ++ u32 config; ++ ++ /* Detect memory size */ ++ sdram_base = ioremap_nocache(AR2315_SDRAMCTL_BASE, ++ AR2315_SDRAMCTL_SIZE); ++ memcfg = __raw_readl(sdram_base + AR2315_MEM_CFG); ++ memsize = 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_DATA_WIDTH); ++ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_COL_WIDTH); ++ memsize <<= 1 + ATH25_REG_MS(memcfg, AR2315_MEM_CFG_ROW_WIDTH); ++ memsize <<= 3; ++ add_memory_region(0, memsize, BOOT_MEM_RAM); ++ iounmap(sdram_base); ++ ++ ar2315_rst_base = ioremap_nocache(AR2315_RST_BASE, AR2315_RST_SIZE); ++ ++ /* Detect the hardware based on the device ID */ ++ devid = ar2315_rst_reg_read(AR2315_SREV) & AR2315_REV_CHIP; ++ switch (devid) { ++ case 0x91: /* Need to check */ ++ ath25_soc = ATH25_SOC_AR2318; ++ break; ++ case 0x90: ++ ath25_soc = ATH25_SOC_AR2317; ++ break; ++ case 0x87: ++ ath25_soc = ATH25_SOC_AR2316; ++ break; ++ case 0x86: ++ default: ++ ath25_soc = ATH25_SOC_AR2315; ++ break; ++ } ++ ath25_board.devid = devid; ++ ++ /* Clear any lingering AHB errors */ ++ config = read_c0_config(); ++ write_c0_config(config & ~0x3); ++ ar2315_rst_reg_write(AR2315_AHB_ERR0, AR2315_AHB_ERROR_DET); ++ ar2315_rst_reg_read(AR2315_AHB_ERR1); ++ ar2315_rst_reg_write(AR2315_WDT_CTRL, AR2315_WDT_CTRL_IGNORE); ++ ++ _machine_restart = ar2315_restart; ++} ++ ++void __init ar2315_arch_init(void) ++{ ++ unsigned irq = irq_create_mapping(ar2315_misc_irq_domain, ++ AR2315_MISC_IRQ_UART0); ++ ++ ath25_serial_setup(AR2315_UART0_BASE, irq, ar2315_apb_frequency()); ++} +--- /dev/null ++++ b/arch/mips/ath25/ar2315.h +@@ -0,0 +1,22 @@ ++#ifndef __AR2315_H ++#define __AR2315_H ++ ++#ifdef CONFIG_SOC_AR2315 ++ ++void ar2315_arch_init_irq(void); ++void ar2315_init_devices(void); ++void ar2315_plat_time_init(void); ++void ar2315_plat_mem_setup(void); ++void ar2315_arch_init(void); ++ ++#else ++ ++static inline void ar2315_arch_init_irq(void) {} ++static inline void ar2315_init_devices(void) {} ++static inline void ar2315_plat_time_init(void) {} ++static inline void ar2315_plat_mem_setup(void) {} ++static inline void ar2315_arch_init(void) {} ++ ++#endif ++ ++#endif /* __AR2315_H */ +--- /dev/null ++++ b/arch/mips/ath25/ar5312.h +@@ -0,0 +1,22 @@ ++#ifndef __AR5312_H ++#define __AR5312_H ++ ++#ifdef CONFIG_SOC_AR5312 ++ ++void ar5312_arch_init_irq(void); ++void ar5312_init_devices(void); ++void ar5312_plat_time_init(void); ++void ar5312_plat_mem_setup(void); ++void ar5312_arch_init(void); ++ ++#else ++ ++static inline void ar5312_arch_init_irq(void) {} ++static inline void ar5312_init_devices(void) {} ++static inline void ar5312_plat_time_init(void) {} ++static inline void ar5312_plat_mem_setup(void) {} ++static inline void ar5312_arch_init(void) {} ++ ++#endif ++ ++#endif /* __AR5312_H */ +--- /dev/null ++++ b/arch/mips/ath25/devices.h +@@ -0,0 +1,43 @@ ++#ifndef __ATH25_DEVICES_H ++#define __ATH25_DEVICES_H ++ ++#include <linux/cpu.h> ++ ++#define ATH25_REG_MS(_val, _field) (((_val) & _field##_M) >> _field##_S) ++ ++#define ATH25_IRQ_CPU_CLOCK (MIPS_CPU_IRQ_BASE + 7) /* C0_CAUSE: 0x8000 */ ++ ++enum ath25_soc_type { ++ /* handled by ar5312.c */ ++ ATH25_SOC_AR2312, ++ ATH25_SOC_AR2313, ++ ATH25_SOC_AR5312, ++ ++ /* handled by ar2315.c */ ++ ATH25_SOC_AR2315, ++ ATH25_SOC_AR2316, ++ ATH25_SOC_AR2317, ++ ATH25_SOC_AR2318, ++ ++ ATH25_SOC_UNKNOWN ++}; ++ ++extern enum ath25_soc_type ath25_soc; ++extern struct ar231x_board_config ath25_board; ++extern void (*ath25_irq_dispatch)(void); ++ ++int ath25_find_config(phys_addr_t offset, unsigned long size); ++void ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk); ++int ath25_add_wmac(int nr, u32 base, int irq); ++ ++static inline bool is_ar2315(void) ++{ ++ return (current_cpu_data.cputype == CPU_4KEC); ++} ++ ++static inline bool is_ar5312(void) ++{ ++ return !is_ar2315(); ++} ++ ++#endif +--- /dev/null ++++ b/arch/mips/ath25/devices.c +@@ -0,0 +1,125 @@ ++#include <linux/kernel.h> ++#include <linux/init.h> ++#include <linux/serial_8250.h> ++#include <linux/platform_device.h> ++#include <asm/bootinfo.h> ++ ++#include <ath25_platform.h> ++#include "devices.h" ++#include "ar5312.h" ++#include "ar2315.h" ++ ++struct ar231x_board_config ath25_board; ++enum ath25_soc_type ath25_soc = ATH25_SOC_UNKNOWN; ++ ++static struct resource ath25_wmac0_res[] = { ++ { ++ .name = "wmac0_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "wmac0_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct resource ath25_wmac1_res[] = { ++ { ++ .name = "wmac1_membase", ++ .flags = IORESOURCE_MEM, ++ }, ++ { ++ .name = "wmac1_irq", ++ .flags = IORESOURCE_IRQ, ++ } ++}; ++ ++static struct platform_device ath25_wmac[] = { ++ { ++ .id = 0, ++ .name = "ar231x-wmac", ++ .resource = ath25_wmac0_res, ++ .num_resources = ARRAY_SIZE(ath25_wmac0_res), ++ .dev.platform_data = &ath25_board, ++ }, ++ { ++ .id = 1, ++ .name = "ar231x-wmac", ++ .resource = ath25_wmac1_res, ++ .num_resources = ARRAY_SIZE(ath25_wmac1_res), ++ .dev.platform_data = &ath25_board, ++ }, ++}; ++ ++static const char * const soc_type_strings[] = { ++ [ATH25_SOC_AR5312] = "Atheros AR5312", ++ [ATH25_SOC_AR2312] = "Atheros AR2312", ++ [ATH25_SOC_AR2313] = "Atheros AR2313", ++ [ATH25_SOC_AR2315] = "Atheros AR2315", ++ [ATH25_SOC_AR2316] = "Atheros AR2316", ++ [ATH25_SOC_AR2317] = "Atheros AR2317", ++ [ATH25_SOC_AR2318] = "Atheros AR2318", ++ [ATH25_SOC_UNKNOWN] = "Atheros (unknown)", ++}; ++ ++const char *get_system_type(void) ++{ ++ if ((ath25_soc >= ARRAY_SIZE(soc_type_strings)) || ++ !soc_type_strings[ath25_soc]) ++ return soc_type_strings[ATH25_SOC_UNKNOWN]; ++ return soc_type_strings[ath25_soc]; ++} ++ ++void __init ath25_serial_setup(u32 mapbase, int irq, unsigned int uartclk) ++{ ++ struct uart_port s; ++ ++ memset(&s, 0, sizeof(s)); ++ ++ s.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP; ++ s.iotype = UPIO_MEM32; ++ s.irq = irq; ++ s.regshift = 2; ++ s.mapbase = mapbase; ++ s.uartclk = uartclk; ++ ++ early_serial_setup(&s); ++} ++ ++int __init ath25_add_wmac(int nr, u32 base, int irq) ++{ ++ struct resource *res; ++ ++ ath25_wmac[nr].dev.platform_data = &ath25_board; ++ res = &ath25_wmac[nr].resource[0]; ++ res->start = base; ++ res->end = base + 0x10000 - 1; ++ res++; ++ res->start = irq; ++ res->end = irq; ++ return platform_device_register(&ath25_wmac[nr]); ++} ++ ++static int __init ath25_register_devices(void) ++{ ++ if (is_ar5312()) ++ ar5312_init_devices(); ++ else ++ ar2315_init_devices(); ++ ++ return 0; ++} ++ ++device_initcall(ath25_register_devices); ++ ++static int __init ath25_arch_init(void) ++{ ++ if (is_ar5312()) ++ ar5312_arch_init(); ++ else ++ ar2315_arch_init(); ++ ++ return 0; ++} ++ ++arch_initcall(ath25_arch_init); |