diff options
author | Florian Fainelli <florian@openwrt.org> | 2014-02-28 20:30:08 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2014-02-28 20:30:08 +0000 |
commit | 800930b924c19a56b3a6e94ad351cd0715fb410d (patch) | |
tree | 70158d97f68604d69da8da779507469cf930bf07 /target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch | |
parent | 68c939ba0b0a0dda84e7a2ae370155be9a5593bc (diff) | |
download | master-187ad058-800930b924c19a56b3a6e94ad351cd0715fb410d.tar.gz master-187ad058-800930b924c19a56b3a6e94ad351cd0715fb410d.tar.bz2 master-187ad058-800930b924c19a56b3a6e94ad351cd0715fb410d.zip |
brcm2708: update against latest rpi-3.10.y branch
Update our copies of the brcm2708 patches to the latest rpi-3.10-y
rebased against linux-3.10.y stable (3.10.32). This should hopefully
make it easier for us in the future to leverage the raspberry/rpi-*
branches.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39770 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch')
-rw-r--r-- | target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch | 656 |
1 files changed, 0 insertions, 656 deletions
diff --git a/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch b/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch deleted file mode 100644 index 2b715c3f51..0000000000 --- a/target/linux/brcm2708/patches-3.10/009-bcm2708-spi-driver.patch +++ /dev/null @@ -1,656 +0,0 @@ ---- a/drivers/spi/Kconfig -+++ b/drivers/spi/Kconfig -@@ -86,6 +86,14 @@ config SPI_BCM2835 - is for the regular SPI controller. Slave mode operation is not also - not supported. - -+config SPI_BCM2708 -+ tristate "BCM2708 SPI controller driver (SPI0)" -+ depends on MACH_BCM2708 -+ help -+ This selects a driver for the Broadcom BCM2708 SPI master (SPI0). This -+ driver is not compatible with the "Universal SPI Master" or the SPI slave -+ device. -+ - config SPI_BFIN5XX - tristate "SPI controller driver for ADI Blackfin5xx" - depends on BLACKFIN ---- a/drivers/spi/Makefile -+++ b/drivers/spi/Makefile -@@ -17,6 +17,7 @@ obj-$(CONFIG_SPI_AU1550) += spi-au1550. - obj-$(CONFIG_SPI_BCM2835) += spi-bcm2835.o - obj-$(CONFIG_SPI_BCM63XX) += spi-bcm63xx.o - obj-$(CONFIG_SPI_BFIN5XX) += spi-bfin5xx.o -+obj-$(CONFIG_SPI_BCM2708) += spi-bcm2708.o - obj-$(CONFIG_SPI_BFIN_SPORT) += spi-bfin-sport.o - obj-$(CONFIG_SPI_BITBANG) += spi-bitbang.o - obj-$(CONFIG_SPI_BUTTERFLY) += spi-butterfly.o ---- /dev/null -+++ b/drivers/spi/spi-bcm2708.c -@@ -0,0 +1,626 @@ -+/* -+ * Driver for Broadcom BCM2708 SPI Controllers -+ * -+ * Copyright (C) 2012 Chris Boot -+ * -+ * This driver is inspired by: -+ * spi-ath79.c, Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> -+ * spi-atmel.c, Copyright (C) 2006 Atmel Corporation -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ */ -+ -+#include <linux/kernel.h> -+#include <linux/module.h> -+#include <linux/spinlock.h> -+#include <linux/clk.h> -+#include <linux/err.h> -+#include <linux/platform_device.h> -+#include <linux/io.h> -+#include <linux/spi/spi.h> -+#include <linux/interrupt.h> -+#include <linux/delay.h> -+#include <linux/log2.h> -+#include <linux/sched.h> -+#include <linux/wait.h> -+ -+/* SPI register offsets */ -+#define SPI_CS 0x00 -+#define SPI_FIFO 0x04 -+#define SPI_CLK 0x08 -+#define SPI_DLEN 0x0c -+#define SPI_LTOH 0x10 -+#define SPI_DC 0x14 -+ -+/* Bitfields in CS */ -+#define SPI_CS_LEN_LONG 0x02000000 -+#define SPI_CS_DMA_LEN 0x01000000 -+#define SPI_CS_CSPOL2 0x00800000 -+#define SPI_CS_CSPOL1 0x00400000 -+#define SPI_CS_CSPOL0 0x00200000 -+#define SPI_CS_RXF 0x00100000 -+#define SPI_CS_RXR 0x00080000 -+#define SPI_CS_TXD 0x00040000 -+#define SPI_CS_RXD 0x00020000 -+#define SPI_CS_DONE 0x00010000 -+#define SPI_CS_LEN 0x00002000 -+#define SPI_CS_REN 0x00001000 -+#define SPI_CS_ADCS 0x00000800 -+#define SPI_CS_INTR 0x00000400 -+#define SPI_CS_INTD 0x00000200 -+#define SPI_CS_DMAEN 0x00000100 -+#define SPI_CS_TA 0x00000080 -+#define SPI_CS_CSPOL 0x00000040 -+#define SPI_CS_CLEAR_RX 0x00000020 -+#define SPI_CS_CLEAR_TX 0x00000010 -+#define SPI_CS_CPOL 0x00000008 -+#define SPI_CS_CPHA 0x00000004 -+#define SPI_CS_CS_10 0x00000002 -+#define SPI_CS_CS_01 0x00000001 -+ -+#define SPI_TIMEOUT_MS 150 -+ -+#define DRV_NAME "bcm2708_spi" -+ -+struct bcm2708_spi { -+ spinlock_t lock; -+ void __iomem *base; -+ int irq; -+ struct clk *clk; -+ bool stopping; -+ -+ struct list_head queue; -+ struct workqueue_struct *workq; -+ struct work_struct work; -+ struct completion done; -+ -+ const u8 *tx_buf; -+ u8 *rx_buf; -+ int len; -+}; -+ -+struct bcm2708_spi_state { -+ u32 cs; -+ u16 cdiv; -+}; -+ -+/* -+ * This function sets the ALT mode on the SPI pins so that we can use them with -+ * the SPI hardware. -+ * -+ * FIXME: This is a hack. Use pinmux / pinctrl. -+ */ -+static void bcm2708_init_pinmode(void) -+{ -+#define INP_GPIO(g) *(gpio+((g)/10)) &= ~(7<<(((g)%10)*3)) -+#define SET_GPIO_ALT(g,a) *(gpio+(((g)/10))) |= (((a)<=3?(a)+4:(a)==4?3:2)<<(((g)%10)*3)) -+ -+ int pin; -+ u32 *gpio = ioremap(0x20200000, SZ_16K); -+ -+ /* SPI is on GPIO 7..11 */ -+ for (pin = 7; pin <= 11; pin++) { -+ INP_GPIO(pin); /* set mode to GPIO input first */ -+ SET_GPIO_ALT(pin, 0); /* set mode to ALT 0 */ -+ } -+ -+ iounmap(gpio); -+ -+#undef INP_GPIO -+#undef SET_GPIO_ALT -+} -+ -+static inline u32 bcm2708_rd(struct bcm2708_spi *bs, unsigned reg) -+{ -+ return readl(bs->base + reg); -+} -+ -+static inline void bcm2708_wr(struct bcm2708_spi *bs, unsigned reg, u32 val) -+{ -+ writel(val, bs->base + reg); -+} -+ -+static inline void bcm2708_rd_fifo(struct bcm2708_spi *bs, int len) -+{ -+ u8 byte; -+ -+ while (len--) { -+ byte = bcm2708_rd(bs, SPI_FIFO); -+ if (bs->rx_buf) -+ *bs->rx_buf++ = byte; -+ } -+} -+ -+static inline void bcm2708_wr_fifo(struct bcm2708_spi *bs, int len) -+{ -+ u8 byte; -+ u16 val; -+ -+ if (len > bs->len) -+ len = bs->len; -+ -+ if (unlikely(bcm2708_rd(bs, SPI_CS) & SPI_CS_LEN)) { -+ /* LoSSI mode */ -+ if (unlikely(len % 2)) { -+ printk(KERN_ERR"bcm2708_wr_fifo: length must be even, skipping.\n"); -+ bs->len = 0; -+ return; -+ } -+ while (len) { -+ if (bs->tx_buf) { -+ val = *(const u16 *)bs->tx_buf; -+ bs->tx_buf += 2; -+ } else -+ val = 0; -+ bcm2708_wr(bs, SPI_FIFO, val); -+ bs->len -= 2; -+ len -= 2; -+ } -+ return; -+ } -+ -+ while (len--) { -+ byte = bs->tx_buf ? *bs->tx_buf++ : 0; -+ bcm2708_wr(bs, SPI_FIFO, byte); -+ bs->len--; -+ } -+} -+ -+static irqreturn_t bcm2708_spi_interrupt(int irq, void *dev_id) -+{ -+ struct spi_master *master = dev_id; -+ struct bcm2708_spi *bs = spi_master_get_devdata(master); -+ u32 cs; -+ -+ spin_lock(&bs->lock); -+ -+ cs = bcm2708_rd(bs, SPI_CS); -+ -+ if (cs & SPI_CS_DONE) { -+ if (bs->len) { /* first interrupt in a transfer */ -+ /* fill the TX fifo with up to 16 bytes */ -+ bcm2708_wr_fifo(bs, 16); -+ } else { /* transfer complete */ -+ /* disable interrupts */ -+ cs &= ~(SPI_CS_INTR | SPI_CS_INTD); -+ bcm2708_wr(bs, SPI_CS, cs); -+ -+ /* drain RX FIFO */ -+ while (cs & SPI_CS_RXD) { -+ bcm2708_rd_fifo(bs, 1); -+ cs = bcm2708_rd(bs, SPI_CS); -+ } -+ -+ /* wake up our bh */ -+ complete(&bs->done); -+ } -+ } else if (cs & SPI_CS_RXR) { -+ /* read 12 bytes of data */ -+ bcm2708_rd_fifo(bs, 12); -+ -+ /* write up to 12 bytes */ -+ bcm2708_wr_fifo(bs, 12); -+ } -+ -+ spin_unlock(&bs->lock); -+ -+ return IRQ_HANDLED; -+} -+ -+static int bcm2708_setup_state(struct spi_master *master, -+ struct device *dev, struct bcm2708_spi_state *state, -+ u32 hz, u8 csel, u8 mode, u8 bpw) -+{ -+ struct bcm2708_spi *bs = spi_master_get_devdata(master); -+ int cdiv; -+ unsigned long bus_hz; -+ u32 cs = 0; -+ -+ bus_hz = clk_get_rate(bs->clk); -+ -+ if (hz >= bus_hz) { -+ cdiv = 2; /* bus_hz / 2 is as fast as we can go */ -+ } else if (hz) { -+ cdiv = DIV_ROUND_UP(bus_hz, hz); -+ -+ /* CDIV must be a power of 2, so round up */ -+ cdiv = roundup_pow_of_two(cdiv); -+ -+ if (cdiv > 65536) { -+ dev_dbg(dev, -+ "setup: %d Hz too slow, cdiv %u; min %ld Hz\n", -+ hz, cdiv, bus_hz / 65536); -+ return -EINVAL; -+ } else if (cdiv == 65536) { -+ cdiv = 0; -+ } else if (cdiv == 1) { -+ cdiv = 2; /* 1 gets rounded down to 0; == 65536 */ -+ } -+ } else { -+ cdiv = 0; -+ } -+ -+ switch (bpw) { -+ case 8: -+ break; -+ case 9: -+ /* Reading in LoSSI mode is a special case. See 'BCM2835 ARM Peripherals' datasheet */ -+ cs |= SPI_CS_LEN; -+ break; -+ default: -+ dev_dbg(dev, "setup: invalid bits_per_word %u (must be 8 or 9)\n", -+ bpw); -+ return -EINVAL; -+ } -+ -+ if (mode & SPI_CPOL) -+ cs |= SPI_CS_CPOL; -+ if (mode & SPI_CPHA) -+ cs |= SPI_CS_CPHA; -+ -+ if (!(mode & SPI_NO_CS)) { -+ if (mode & SPI_CS_HIGH) { -+ cs |= SPI_CS_CSPOL; -+ cs |= SPI_CS_CSPOL0 << csel; -+ } -+ -+ cs |= csel; -+ } else { -+ cs |= SPI_CS_CS_10 | SPI_CS_CS_01; -+ } -+ -+ if (state) { -+ state->cs = cs; -+ state->cdiv = cdiv; -+ dev_dbg(dev, "setup: want %d Hz; " -+ "bus_hz=%lu / cdiv=%u == %lu Hz; " -+ "mode %u: cs 0x%08X\n", -+ hz, bus_hz, cdiv, bus_hz/cdiv, mode, cs); -+ } -+ -+ return 0; -+} -+ -+static int bcm2708_process_transfer(struct bcm2708_spi *bs, -+ struct spi_message *msg, struct spi_transfer *xfer) -+{ -+ struct spi_device *spi = msg->spi; -+ struct bcm2708_spi_state state, *stp; -+ int ret; -+ u32 cs; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ if (xfer->bits_per_word || xfer->speed_hz) { -+ ret = bcm2708_setup_state(spi->master, &spi->dev, &state, -+ xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz, -+ spi->chip_select, spi->mode, -+ xfer->bits_per_word ? xfer->bits_per_word : -+ spi->bits_per_word); -+ if (ret) -+ return ret; -+ -+ stp = &state; -+ } else { -+ stp = spi->controller_state; -+ } -+ -+ INIT_COMPLETION(bs->done); -+ bs->tx_buf = xfer->tx_buf; -+ bs->rx_buf = xfer->rx_buf; -+ bs->len = xfer->len; -+ -+ cs = stp->cs | SPI_CS_INTR | SPI_CS_INTD | SPI_CS_TA; -+ -+ bcm2708_wr(bs, SPI_CLK, stp->cdiv); -+ bcm2708_wr(bs, SPI_CS, cs); -+ -+ ret = wait_for_completion_timeout(&bs->done, -+ msecs_to_jiffies(SPI_TIMEOUT_MS)); -+ if (ret == 0) { -+ dev_err(&spi->dev, "transfer timed out\n"); -+ return -ETIMEDOUT; -+ } -+ -+ if (xfer->delay_usecs) -+ udelay(xfer->delay_usecs); -+ -+ if (list_is_last(&xfer->transfer_list, &msg->transfers) || -+ xfer->cs_change) { -+ /* clear TA and interrupt flags */ -+ bcm2708_wr(bs, SPI_CS, stp->cs); -+ } -+ -+ msg->actual_length += (xfer->len - bs->len); -+ -+ return 0; -+} -+ -+static void bcm2708_work(struct work_struct *work) -+{ -+ struct bcm2708_spi *bs = container_of(work, struct bcm2708_spi, work); -+ unsigned long flags; -+ struct spi_message *msg; -+ struct spi_transfer *xfer; -+ int status = 0; -+ -+ spin_lock_irqsave(&bs->lock, flags); -+ while (!list_empty(&bs->queue)) { -+ msg = list_first_entry(&bs->queue, struct spi_message, queue); -+ list_del_init(&msg->queue); -+ spin_unlock_irqrestore(&bs->lock, flags); -+ -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) { -+ status = bcm2708_process_transfer(bs, msg, xfer); -+ if (status) -+ break; -+ } -+ -+ msg->status = status; -+ msg->complete(msg->context); -+ -+ spin_lock_irqsave(&bs->lock, flags); -+ } -+ spin_unlock_irqrestore(&bs->lock, flags); -+} -+ -+static int bcm2708_spi_setup(struct spi_device *spi) -+{ -+ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master); -+ struct bcm2708_spi_state *state; -+ int ret; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ if (!(spi->mode & SPI_NO_CS) && -+ (spi->chip_select > spi->master->num_chipselect)) { -+ dev_dbg(&spi->dev, -+ "setup: invalid chipselect %u (%u defined)\n", -+ spi->chip_select, spi->master->num_chipselect); -+ return -EINVAL; -+ } -+ -+ state = spi->controller_state; -+ if (!state) { -+ state = kzalloc(sizeof(*state), GFP_KERNEL); -+ if (!state) -+ return -ENOMEM; -+ -+ spi->controller_state = state; -+ } -+ -+ ret = bcm2708_setup_state(spi->master, &spi->dev, state, -+ spi->max_speed_hz, spi->chip_select, spi->mode, -+ spi->bits_per_word); -+ if (ret < 0) { -+ kfree(state); -+ spi->controller_state = NULL; -+ return ret; -+ } -+ -+ dev_dbg(&spi->dev, -+ "setup: cd %d: %d Hz, bpw %u, mode 0x%x -> CS=%08x CDIV=%04x\n", -+ spi->chip_select, spi->max_speed_hz, spi->bits_per_word, -+ spi->mode, state->cs, state->cdiv); -+ -+ return 0; -+} -+ -+static int bcm2708_spi_transfer(struct spi_device *spi, struct spi_message *msg) -+{ -+ struct bcm2708_spi *bs = spi_master_get_devdata(spi->master); -+ struct spi_transfer *xfer; -+ int ret; -+ unsigned long flags; -+ -+ if (unlikely(list_empty(&msg->transfers))) -+ return -EINVAL; -+ -+ if (bs->stopping) -+ return -ESHUTDOWN; -+ -+ list_for_each_entry(xfer, &msg->transfers, transfer_list) { -+ if (!(xfer->tx_buf || xfer->rx_buf) && xfer->len) { -+ dev_dbg(&spi->dev, "missing rx or tx buf\n"); -+ return -EINVAL; -+ } -+ -+ if (!xfer->bits_per_word || xfer->speed_hz) -+ continue; -+ -+ ret = bcm2708_setup_state(spi->master, &spi->dev, NULL, -+ xfer->speed_hz ? xfer->speed_hz : spi->max_speed_hz, -+ spi->chip_select, spi->mode, -+ xfer->bits_per_word ? xfer->bits_per_word : -+ spi->bits_per_word); -+ if (ret) -+ return ret; -+ } -+ -+ msg->status = -EINPROGRESS; -+ msg->actual_length = 0; -+ -+ spin_lock_irqsave(&bs->lock, flags); -+ list_add_tail(&msg->queue, &bs->queue); -+ queue_work(bs->workq, &bs->work); -+ spin_unlock_irqrestore(&bs->lock, flags); -+ -+ return 0; -+} -+ -+static void bcm2708_spi_cleanup(struct spi_device *spi) -+{ -+ if (spi->controller_state) { -+ kfree(spi->controller_state); -+ spi->controller_state = NULL; -+ } -+} -+ -+static int bcm2708_spi_probe(struct platform_device *pdev) -+{ -+ struct resource *regs; -+ int irq, err = -ENOMEM; -+ struct clk *clk; -+ struct spi_master *master; -+ struct bcm2708_spi *bs; -+ -+ regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ if (!regs) { -+ dev_err(&pdev->dev, "could not get IO memory\n"); -+ return -ENXIO; -+ } -+ -+ irq = platform_get_irq(pdev, 0); -+ if (irq < 0) { -+ dev_err(&pdev->dev, "could not get IRQ\n"); -+ return irq; -+ } -+ -+ clk = clk_get(&pdev->dev, NULL); -+ if (IS_ERR(clk)) { -+ dev_err(&pdev->dev, "could not find clk: %ld\n", PTR_ERR(clk)); -+ return PTR_ERR(clk); -+ } -+ -+ bcm2708_init_pinmode(); -+ -+ master = spi_alloc_master(&pdev->dev, sizeof(*bs)); -+ if (!master) { -+ dev_err(&pdev->dev, "spi_alloc_master() failed\n"); -+ goto out_clk_put; -+ } -+ -+ /* the spi->mode bits understood by this driver: */ -+ master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_NO_CS; -+ -+ master->bus_num = pdev->id; -+ master->num_chipselect = 3; -+ master->setup = bcm2708_spi_setup; -+ master->transfer = bcm2708_spi_transfer; -+ master->cleanup = bcm2708_spi_cleanup; -+ platform_set_drvdata(pdev, master); -+ -+ bs = spi_master_get_devdata(master); -+ -+ spin_lock_init(&bs->lock); -+ INIT_LIST_HEAD(&bs->queue); -+ init_completion(&bs->done); -+ INIT_WORK(&bs->work, bcm2708_work); -+ -+ bs->base = ioremap(regs->start, resource_size(regs)); -+ if (!bs->base) { -+ dev_err(&pdev->dev, "could not remap memory\n"); -+ goto out_master_put; -+ } -+ -+ bs->workq = create_singlethread_workqueue(dev_name(&pdev->dev)); -+ if (!bs->workq) { -+ dev_err(&pdev->dev, "could not create workqueue\n"); -+ goto out_iounmap; -+ } -+ -+ bs->irq = irq; -+ bs->clk = clk; -+ bs->stopping = false; -+ -+ err = request_irq(irq, bcm2708_spi_interrupt, 0, dev_name(&pdev->dev), -+ master); -+ if (err) { -+ dev_err(&pdev->dev, "could not request IRQ: %d\n", err); -+ goto out_workqueue; -+ } -+ -+ /* initialise the hardware */ -+ clk_enable(clk); -+ bcm2708_wr(bs, SPI_CS, SPI_CS_REN | SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX); -+ -+ err = spi_register_master(master); -+ if (err) { -+ dev_err(&pdev->dev, "could not register SPI master: %d\n", err); -+ goto out_free_irq; -+ } -+ -+ dev_info(&pdev->dev, "SPI Controller at 0x%08lx (irq %d)\n", -+ (unsigned long)regs->start, irq); -+ -+ return 0; -+ -+out_free_irq: -+ free_irq(bs->irq, master); -+out_workqueue: -+ destroy_workqueue(bs->workq); -+out_iounmap: -+ iounmap(bs->base); -+out_master_put: -+ spi_master_put(master); -+out_clk_put: -+ clk_put(clk); -+ return err; -+} -+ -+static int bcm2708_spi_remove(struct platform_device *pdev) -+{ -+ struct spi_master *master = platform_get_drvdata(pdev); -+ struct bcm2708_spi *bs = spi_master_get_devdata(master); -+ -+ /* reset the hardware and block queue progress */ -+ spin_lock_irq(&bs->lock); -+ bs->stopping = true; -+ bcm2708_wr(bs, SPI_CS, SPI_CS_CLEAR_RX | SPI_CS_CLEAR_TX); -+ spin_unlock_irq(&bs->lock); -+ -+ flush_work_sync(&bs->work); -+ -+ clk_disable(bs->clk); -+ clk_put(bs->clk); -+ free_irq(bs->irq, master); -+ iounmap(bs->base); -+ -+ spi_unregister_master(master); -+ -+ return 0; -+} -+ -+static struct platform_driver bcm2708_spi_driver = { -+ .driver = { -+ .name = DRV_NAME, -+ .owner = THIS_MODULE, -+ }, -+ .probe = bcm2708_spi_probe, -+ .remove = bcm2708_spi_remove, -+}; -+ -+ -+static int __init bcm2708_spi_init(void) -+{ -+ return platform_driver_probe(&bcm2708_spi_driver, bcm2708_spi_probe); -+} -+module_init(bcm2708_spi_init); -+ -+static void __exit bcm2708_spi_exit(void) -+{ -+ platform_driver_unregister(&bcm2708_spi_driver); -+} -+module_exit(bcm2708_spi_exit); -+ -+ -+//module_platform_driver(bcm2708_spi_driver); -+ -+MODULE_DESCRIPTION("SPI controller driver for Broadcom BCM2708"); -+MODULE_AUTHOR("Chris Boot <bootc@bootc.net>"); -+MODULE_LICENSE("GPL v2"); -+MODULE_ALIAS("platform:" DRV_NAME); |