brcm2708: add 3.14 support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@42680 3c298f89-4303-0410-b956-a3cf2f4a3e73

1 files changed, 57074 insertions, 0 deletions

diff --git a/target/linux/brcm2708/patches-3.14/0003-Add-dwc_otg-driver.patch b/target/linux/brcm2708/patches-3.14/0003-Add-dwc_otg-driver.patch
new file mode 100644
index 0000000000..c6e332acd6
--- /dev/null
+++ b/target/linux/brcm2708/patches-3.14/0003-Add-dwc_otg-driver.patch
@@ -0,0 +1,57074 @@
+From 8065edf883d2adeea72ab1d64d50931501959a83 Mon Sep 17 00:00:00 2001
+From: popcornmix <popcornmix@gmail.com>
+Date: Wed, 1 May 2013 19:46:17 +0100
+Subject: [PATCH 03/54] Add dwc_otg driver
+
+Signed-off-by: popcornmix <popcornmix@gmail.com>
+---
+ drivers/usb/Makefile                               |    1 +
+ drivers/usb/core/generic.c                         |    1 +
+ drivers/usb/core/message.c                         |   79 +
+ drivers/usb/core/otg_whitelist.h                   |  160 +-
+ drivers/usb/gadget/file_storage.c                  | 3676 ++++++++++
+ drivers/usb/host/Kconfig                           |   13 +
+ drivers/usb/host/Makefile                          |    2 +
+ drivers/usb/host/dwc_common_port/Makefile          |   58 +
+ drivers/usb/host/dwc_common_port/Makefile.fbsd     |   17 +
+ drivers/usb/host/dwc_common_port/Makefile.linux    |   49 +
+ drivers/usb/host/dwc_common_port/changes.txt       |  174 +
+ drivers/usb/host/dwc_common_port/doc/doxygen.cfg   |  270 +
+ drivers/usb/host/dwc_common_port/dwc_cc.c          |  532 ++
+ drivers/usb/host/dwc_common_port/dwc_cc.h          |  224 +
+ drivers/usb/host/dwc_common_port/dwc_common_fbsd.c | 1308 ++++
+ .../usb/host/dwc_common_port/dwc_common_linux.c    | 1421 ++++
+ drivers/usb/host/dwc_common_port/dwc_common_nbsd.c | 1275 ++++
+ drivers/usb/host/dwc_common_port/dwc_crypto.c      |  308 +
+ drivers/usb/host/dwc_common_port/dwc_crypto.h      |  111 +
+ drivers/usb/host/dwc_common_port/dwc_dh.c          |  291 +
+ drivers/usb/host/dwc_common_port/dwc_dh.h          |  106 +
+ drivers/usb/host/dwc_common_port/dwc_list.h        |  594 ++
+ drivers/usb/host/dwc_common_port/dwc_mem.c         |  245 +
+ drivers/usb/host/dwc_common_port/dwc_modpow.c      |  636 ++
+ drivers/usb/host/dwc_common_port/dwc_modpow.h      |   34 +
+ drivers/usb/host/dwc_common_port/dwc_notifier.c    |  319 +
+ drivers/usb/host/dwc_common_port/dwc_notifier.h    |  122 +
+ drivers/usb/host/dwc_common_port/dwc_os.h          | 1260 ++++
+ drivers/usb/host/dwc_common_port/usb.h             |  946 +++
+ drivers/usb/host/dwc_otg/Makefile                  |   80 +
+ drivers/usb/host/dwc_otg/doc/doxygen.cfg           |  224 +
+ drivers/usb/host/dwc_otg/dummy_audio.c             | 1575 +++++
+ drivers/usb/host/dwc_otg/dwc_cfi_common.h          |  142 +
+ drivers/usb/host/dwc_otg/dwc_otg_adp.c             |  854 +++
+ drivers/usb/host/dwc_otg/dwc_otg_adp.h             |   80 +
+ drivers/usb/host/dwc_otg/dwc_otg_attr.c            | 1210 ++++
+ drivers/usb/host/dwc_otg/dwc_otg_attr.h            |   89 +
+ drivers/usb/host/dwc_otg/dwc_otg_cfi.c             | 1876 +++++
+ drivers/usb/host/dwc_otg/dwc_otg_cfi.h             |  320 +
+ drivers/usb/host/dwc_otg/dwc_otg_cil.c             | 7151 ++++++++++++++++++++
+ drivers/usb/host/dwc_otg/dwc_otg_cil.h             | 1464 ++++
+ drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c        | 1563 +++++
+ drivers/usb/host/dwc_otg/dwc_otg_core_if.h         |  705 ++
+ drivers/usb/host/dwc_otg/dwc_otg_dbg.h             |  116 +
+ drivers/usb/host/dwc_otg/dwc_otg_driver.c          | 1700 +++++
+ drivers/usb/host/dwc_otg/dwc_otg_driver.h          |   86 +
+ drivers/usb/host/dwc_otg/dwc_otg_hcd.c             | 3473 ++++++++++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd.h             |  824 +++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c        | 1133 ++++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h          |  412 ++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c        | 2106 ++++++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c       |  893 +++
+ drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c       |  922 +++
+ drivers/usb/host/dwc_otg/dwc_otg_os_dep.h          |  185 +
+ drivers/usb/host/dwc_otg/dwc_otg_pcd.c             | 2708 ++++++++
+ drivers/usb/host/dwc_otg/dwc_otg_pcd.h             |  266 +
+ drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h          |  360 +
+ drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c        | 5147 ++++++++++++++
+ drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c       | 1358 ++++
+ drivers/usb/host/dwc_otg/dwc_otg_regs.h            | 2550 +++++++
+ drivers/usb/host/dwc_otg/test/Makefile             |   16 +
+ drivers/usb/host/dwc_otg/test/dwc_otg_test.pm      |  337 +
+ drivers/usb/host/dwc_otg/test/test_mod_param.pl    |  133 +
+ drivers/usb/host/dwc_otg/test/test_sysfs.pl        |  193 +
+ 64 files changed, 56440 insertions(+), 43 deletions(-)
+ create mode 100644 drivers/usb/gadget/file_storage.c
+ create mode 100644 drivers/usb/host/dwc_common_port/Makefile
+ create mode 100644 drivers/usb/host/dwc_common_port/Makefile.fbsd
+ create mode 100644 drivers/usb/host/dwc_common_port/Makefile.linux
+ create mode 100644 drivers/usb/host/dwc_common_port/changes.txt
+ create mode 100644 drivers/usb/host/dwc_common_port/doc/doxygen.cfg
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_cc.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_linux.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_crypto.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_dh.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_list.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_mem.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_modpow.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.c
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_notifier.h
+ create mode 100644 drivers/usb/host/dwc_common_port/dwc_os.h
+ create mode 100644 drivers/usb/host/dwc_common_port/usb.h
+ create mode 100644 drivers/usb/host/dwc_otg/Makefile
+ create mode 100644 drivers/usb/host/dwc_otg/doc/doxygen.cfg
+ create mode 100644 drivers/usb/host/dwc_otg/dummy_audio.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_cfi_common.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_adp.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_attr.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cfi.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_core_if.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_dbg.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_driver.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+ create mode 100644 drivers/usb/host/dwc_otg/dwc_otg_regs.h
+ create mode 100644 drivers/usb/host/dwc_otg/test/Makefile
+ create mode 100644 drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
+ create mode 100644 drivers/usb/host/dwc_otg/test/test_mod_param.pl
+ create mode 100644 drivers/usb/host/dwc_otg/test/test_sysfs.pl
+
+diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
+index 1ae2bf3..c4a45aa 100644
+--- a/drivers/usb/Makefile
++++ b/drivers/usb/Makefile
+@@ -24,6 +24,7 @@ obj-$(CONFIG_USB_U132_HCD)	+= host/
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= host/
+ obj-$(CONFIG_USB_HWA_HCD)	+= host/
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= host/
++obj-$(CONFIG_USB_DWCOTG)	+= host/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= host/
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= host/
+ obj-$(CONFIG_USB_FUSBH200_HCD)	+= host/
+diff --git a/drivers/usb/core/generic.c b/drivers/usb/core/generic.c
+index acbfeb0..7d675c8 100644
+--- a/drivers/usb/core/generic.c
++++ b/drivers/usb/core/generic.c
+@@ -152,6 +152,7 @@ int usb_choose_configuration(struct usb_device *udev)
+ 		dev_warn(&udev->dev,
+ 			"no configuration chosen from %d choice%s\n",
+ 			num_configs, plural(num_configs));
++		dev_warn(&udev->dev, "No support over %dmA\n", udev->bus_mA);
+ 	}
+ 	return i;
+ }
+diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
+index f829a1a..4a44ae7 100644
+--- a/drivers/usb/core/message.c
++++ b/drivers/usb/core/message.c
+@@ -1888,6 +1888,85 @@ free_interfaces:
+ 	if (cp->string == NULL &&
+ 			!(dev->quirks & USB_QUIRK_CONFIG_INTF_STRINGS))
+ 		cp->string = usb_cache_string(dev, cp->desc.iConfiguration);
++/* Uncomment this define to enable the HS Electrical Test support */
++#define DWC_HS_ELECT_TST 1
++#ifdef DWC_HS_ELECT_TST
++		/* Here we implement the HS Electrical Test support. The
++		 * tester uses a vendor ID of 0x1A0A to indicate we should
++		 * run a special test sequence. The product ID tells us
++		 * which sequence to run. We invoke the test sequence by
++		 * sending a non-standard SetFeature command to our root
++		 * hub port. Our dwc_otg_hcd_hub_control() routine will
++		 * recognize the command and perform the desired test
++		 * sequence.
++		 */
++		if (dev->descriptor.idVendor == 0x1A0A) {
++			/* HSOTG Electrical Test */
++			dev_warn(&dev->dev, "VID from HSOTG Electrical Test Fixture\n");
++
++			if (dev->bus && dev->bus->root_hub) {
++				struct usb_device *hdev = dev->bus->root_hub;
++				dev_warn(&dev->dev, "Got PID 0x%x\n", dev->descriptor.idProduct);
++
++				switch (dev->descriptor.idProduct) {
++				case 0x0101:	/* TEST_SE0_NAK */
++					dev_warn(&dev->dev, "TEST_SE0_NAK\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x300, NULL, 0, HZ);
++					break;
++
++				case 0x0102:	/* TEST_J */
++					dev_warn(&dev->dev, "TEST_J\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x100, NULL, 0, HZ);
++					break;
++
++				case 0x0103:	/* TEST_K */
++					dev_warn(&dev->dev, "TEST_K\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x200, NULL, 0, HZ);
++					break;
++
++				case 0x0104:	/* TEST_PACKET */
++					dev_warn(&dev->dev, "TEST_PACKET\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x400, NULL, 0, HZ);
++					break;
++
++				case 0x0105:	/* TEST_FORCE_ENABLE */
++					dev_warn(&dev->dev, "TEST_FORCE_ENABLE\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x500, NULL, 0, HZ);
++					break;
++
++				case 0x0106:	/* HS_HOST_PORT_SUSPEND_RESUME */
++					dev_warn(&dev->dev, "HS_HOST_PORT_SUSPEND_RESUME\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x600, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0107:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x700, NULL, 0, 40 * HZ);
++					break;
++
++				case 0x0108:	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++					dev_warn(&dev->dev, "SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute\n");
++					usb_control_msg(hdev, usb_sndctrlpipe(hdev, 0),
++							USB_REQ_SET_FEATURE, USB_RT_PORT,
++							USB_PORT_FEAT_TEST, 0x800, NULL, 0, 40 * HZ);
++				}
++			}
++		}
++#endif /* DWC_HS_ELECT_TST */
+ 
+ 	/* Now that the interfaces are installed, re-enable LPM. */
+ 	usb_unlocked_enable_lpm(dev);
+diff --git a/drivers/usb/core/otg_whitelist.h b/drivers/usb/core/otg_whitelist.h
+index e8cdce5..ca0ac47 100644
+--- a/drivers/usb/core/otg_whitelist.h
++++ b/drivers/usb/core/otg_whitelist.h
+@@ -19,33 +19,82 @@
+ static struct usb_device_id whitelist_table [] = {
+ 
+ /* hubs are optional in OTG, but very handy ... */
++#define CERT_WITHOUT_HUBS
++#if defined(CERT_WITHOUT_HUBS)
++{ USB_DEVICE( 0x0000, 0x0000 ), }, /* Root HUB Only*/
++#else
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 0), },
+ { USB_DEVICE_INFO(USB_CLASS_HUB, 0, 1), },
++{ USB_DEVICE_INFO(USB_CLASS_HUB, 0, 2), },
++#endif
+ 
+ #ifdef	CONFIG_USB_PRINTER		/* ignoring nonstatic linkage! */
+ /* FIXME actually, printers are NOT supposed to use device classes;
+  * they're supposed to use interface classes...
+  */
+-{ USB_DEVICE_INFO(7, 1, 1) },
+-{ USB_DEVICE_INFO(7, 1, 2) },
+-{ USB_DEVICE_INFO(7, 1, 3) },
++//{ USB_DEVICE_INFO(7, 1, 1) },
++//{ USB_DEVICE_INFO(7, 1, 2) },
++//{ USB_DEVICE_INFO(7, 1, 3) },
+ #endif
+ 
+ #ifdef	CONFIG_USB_NET_CDCETHER
+ /* Linux-USB CDC Ethernet gadget */
+-{ USB_DEVICE(0x0525, 0xa4a1), },
++//{ USB_DEVICE(0x0525, 0xa4a1), },
+ /* Linux-USB CDC Ethernet + RNDIS gadget */
+-{ USB_DEVICE(0x0525, 0xa4a2), },
++//{ USB_DEVICE(0x0525, 0xa4a2), },
+ #endif
+ 
+ #if	defined(CONFIG_USB_TEST) || defined(CONFIG_USB_TEST_MODULE)
+ /* gadget zero, for testing */
+-{ USB_DEVICE(0x0525, 0xa4a0), },
++//{ USB_DEVICE(0x0525, 0xa4a0), },
+ #endif
+ 
++/* OPT Tester */
++{ USB_DEVICE( 0x1a0a, 0x0101 ), }, /* TEST_SE0_NAK */
++{ USB_DEVICE( 0x1a0a, 0x0102 ), }, /* Test_J */
++{ USB_DEVICE( 0x1a0a, 0x0103 ), }, /* Test_K */
++{ USB_DEVICE( 0x1a0a, 0x0104 ), }, /* Test_PACKET */
++{ USB_DEVICE( 0x1a0a, 0x0105 ), }, /* Test_FORCE_ENABLE */
++{ USB_DEVICE( 0x1a0a, 0x0106 ), }, /* HS_PORT_SUSPEND_RESUME  */
++{ USB_DEVICE( 0x1a0a, 0x0107 ), }, /* SINGLE_STEP_GET_DESCRIPTOR setup */
++{ USB_DEVICE( 0x1a0a, 0x0108 ), }, /* SINGLE_STEP_GET_DESCRIPTOR execute */
++
++/* Sony cameras */
++{ USB_DEVICE_VER(0x054c,0x0010,0x0410, 0x0500), },
++
++/* Memory Devices */
++//{ USB_DEVICE( 0x0781, 0x5150 ), }, /* SanDisk */
++//{ USB_DEVICE( 0x05DC, 0x0080 ), }, /* Lexar */
++//{ USB_DEVICE( 0x4146, 0x9281 ), }, /* IOMEGA */
++//{ USB_DEVICE( 0x067b, 0x2507 ), }, /* Hammer 20GB External HD  */
++{ USB_DEVICE( 0x0EA0, 0x2168 ), }, /* Ours Technology Inc. (BUFFALO ClipDrive)*/
++//{ USB_DEVICE( 0x0457, 0x0150 ), }, /* Silicon Integrated Systems Corp. */
++
++/* HP Printers */
++//{ USB_DEVICE( 0x03F0, 0x1102 ), }, /* HP Photosmart 245 */
++//{ USB_DEVICE( 0x03F0, 0x1302 ), }, /* HP Photosmart 370 Series */
++
++/* Speakers */
++//{ USB_DEVICE( 0x0499, 0x3002 ), }, /* YAMAHA YST-MS35D USB Speakers */
++//{ USB_DEVICE( 0x0672, 0x1041 ), }, /* Labtec USB Headset */
++
+ { }	/* Terminating entry */
+ };
+ 
++static inline void report_errors(struct usb_device *dev)
++{
++	/* OTG MESSAGE: report errors here, customize to match your product */
++	dev_info(&dev->dev, "device Vendor:%04x Product:%04x is not supported\n",
++		 le16_to_cpu(dev->descriptor.idVendor),
++		 le16_to_cpu(dev->descriptor.idProduct));
++        if (USB_CLASS_HUB == dev->descriptor.bDeviceClass){
++                dev_printk(KERN_CRIT, &dev->dev, "Unsupported Hub Topology\n");
++        } else {
++                dev_printk(KERN_CRIT, &dev->dev, "Attached Device is not Supported\n");
++        }
++}
++
++
+ static int is_targeted(struct usb_device *dev)
+ {
+ 	struct usb_device_id	*id = whitelist_table;
+@@ -55,58 +104,83 @@ static int is_targeted(struct usb_device *dev)
+ 		return 1;
+ 
+ 	/* HNP test device is _never_ targeted (see OTG spec 6.6.6) */
+-	if ((le16_to_cpu(dev->descriptor.idVendor) == 0x1a0a &&
+-	     le16_to_cpu(dev->descriptor.idProduct) == 0xbadd))
+-		return 0;
++	if (dev->descriptor.idVendor == 0x1a0a &&
++            dev->descriptor.idProduct == 0xbadd) {
++                return 0;
++	} else if (!enable_whitelist) {
++		return 1;
++        } else {
++
++#ifdef DEBUG
++                dev_dbg(&dev->dev, "device V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++                        dev->descriptor.idVendor,
++                        dev->descriptor.idProduct,
++                        dev->descriptor.bDeviceClass,
++                        dev->descriptor.bDeviceSubClass,
++                        dev->descriptor.bDeviceProtocol);
++#endif
+ 
+-	/* NOTE: can't use usb_match_id() since interface caches
+-	 * aren't set up yet. this is cut/paste from that code.
+-	 */
+-	for (id = whitelist_table; id->match_flags; id++) {
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
+-		    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
+-			continue;
++		return 1;
++		/* NOTE: can't use usb_match_id() since interface caches
++		 * aren't set up yet. this is cut/paste from that code.
++		 */
++		for (id = whitelist_table; id->match_flags; id++) {
++#ifdef DEBUG
++			dev_dbg(&dev->dev,
++				"ID: V:%04x P:%04x DC:%04x SC:%04x PR:%04x \n",
++				id->idVendor,
++				id->idProduct,
++				id->bDeviceClass,
++				id->bDeviceSubClass,
++				id->bDeviceProtocol);
++#endif
+ 
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
+-		    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
+-			continue;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_VENDOR) &&
++			    id->idVendor != le16_to_cpu(dev->descriptor.idVendor))
++				continue;
+ 
+-		/* No need to test id->bcdDevice_lo != 0, since 0 is never
+-		   greater than any unsigned number. */
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
+-		    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_PRODUCT) &&
++			    id->idProduct != le16_to_cpu(dev->descriptor.idProduct))
++				continue;
+ 
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
+-		    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
+-			continue;
++			/* No need to test id->bcdDevice_lo != 0, since 0 is never
++			   greater than any unsigned number. */
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_LO) &&
++			    (id->bcdDevice_lo > le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
+ 
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
+-		    (id->bDeviceClass != dev->descriptor.bDeviceClass))
+-			continue;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_HI) &&
++			    (id->bcdDevice_hi < le16_to_cpu(dev->descriptor.bcdDevice)))
++				continue;
+ 
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
+-		    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
+-			continue;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_CLASS) &&
++			    (id->bDeviceClass != dev->descriptor.bDeviceClass))
++				continue;
+ 
+-		if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
+-		    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
+-			continue;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_SUBCLASS) &&
++			    (id->bDeviceSubClass != dev->descriptor.bDeviceSubClass))
++				continue;
+ 
+-		return 1;
++			if ((id->match_flags & USB_DEVICE_ID_MATCH_DEV_PROTOCOL) &&
++			    (id->bDeviceProtocol != dev->descriptor.bDeviceProtocol))
++				continue;
++
++			return 1;
++		}
+ 	}
+ 
+ 	/* add other match criteria here ... */
+ 
+-
+-	/* OTG MESSAGE: report errors here, customize to match your product */
+-	dev_err(&dev->dev, "device v%04x p%04x is not supported\n",
+-		le16_to_cpu(dev->descriptor.idVendor),
+-		le16_to_cpu(dev->descriptor.idProduct));
+ #ifdef	CONFIG_USB_OTG_WHITELIST
++	report_errors(dev);
+ 	return 0;
+ #else
+-	return 1;
++	if (enable_whitelist) {
++		report_errors(dev);
++		return 0;
++	} else {
++		return 1;
++	}
+ #endif
+ }
+ 
+diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
+new file mode 100644
+index 0000000..a896d73
+--- /dev/null
++++ b/drivers/usb/gadget/file_storage.c
+@@ -0,0 +1,3676 @@
++/*
++ * file_storage.c -- File-backed USB Storage Gadget, for USB development
++ *
++ * Copyright (C) 2003-2008 Alan Stern
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * The File-backed Storage Gadget acts as a USB Mass Storage device,
++ * appearing to the host as a disk drive or as a CD-ROM drive.  In addition
++ * to providing an example of a genuinely useful gadget driver for a USB
++ * device, it also illustrates a technique of double-buffering for increased
++ * throughput.  Last but not least, it gives an easy way to probe the
++ * behavior of the Mass Storage drivers in a USB host.
++ *
++ * Backing storage is provided by a regular file or a block device, specified
++ * by the "file" module parameter.  Access can be limited to read-only by
++ * setting the optional "ro" module parameter.  (For CD-ROM emulation,
++ * access is always read-only.)  The gadget will indicate that it has
++ * removable media if the optional "removable" module parameter is set.
++ *
++ * The gadget supports the Control-Bulk (CB), Control-Bulk-Interrupt (CBI),
++ * and Bulk-Only (also known as Bulk-Bulk-Bulk or BBB) transports, selected
++ * by the optional "transport" module parameter.  It also supports the
++ * following protocols: RBC (0x01), ATAPI or SFF-8020i (0x02), QIC-157 (0c03),
++ * UFI (0x04), SFF-8070i (0x05), and transparent SCSI (0x06), selected by
++ * the optional "protocol" module parameter.  In addition, the default
++ * Vendor ID, Product ID, release number and serial number can be overridden.
++ *
++ * There is support for multiple logical units (LUNs), each of which has
++ * its own backing file.  The number of LUNs can be set using the optional
++ * "luns" module parameter (anywhere from 1 to 8), and the corresponding
++ * files are specified using comma-separated lists for "file" and "ro".
++ * The default number of LUNs is taken from the number of "file" elements;
++ * it is 1 if "file" is not given.  If "removable" is not set then a backing
++ * file must be specified for each LUN.  If it is set, then an unspecified
++ * or empty backing filename means the LUN's medium is not loaded.  Ideally
++ * each LUN would be settable independently as a disk drive or a CD-ROM
++ * drive, but currently all LUNs have to be the same type.  The CD-ROM
++ * emulation includes a single data track and no audio tracks; hence there
++ * need be only one backing file per LUN.
++ *
++ * Requirements are modest; only a bulk-in and a bulk-out endpoint are
++ * needed (an interrupt-out endpoint is also needed for CBI).  The memory
++ * requirement amounts to two 16K buffers, size configurable by a parameter.
++ * Support is included for both full-speed and high-speed operation.
++ *
++ * Note that the driver is slightly non-portable in that it assumes a
++ * single memory/DMA buffer will be useable for bulk-in, bulk-out, and
++ * interrupt-in endpoints.  With most device controllers this isn't an
++ * issue, but there may be some with hardware restrictions that prevent
++ * a buffer from being used by more than one endpoint.
++ *
++ * Module options:
++ *
++ *	file=filename[,filename...]
++ *				Required if "removable" is not set, names of
++ *					the files or block devices used for
++ *					backing storage
++ *	serial=HHHH...		Required serial number (string of hex chars)
++ *	ro=b[,b...]		Default false, booleans for read-only access
++ *	removable		Default false, boolean for removable media
++ *	luns=N			Default N = number of filenames, number of
++ *					LUNs to support
++ *	nofua=b[,b...]		Default false, booleans for ignore FUA flag
++ *					in SCSI WRITE(10,12) commands
++ *	stall			Default determined according to the type of
++ *					USB device controller (usually true),
++ *					boolean to permit the driver to halt
++ *					bulk endpoints
++ *	cdrom			Default false, boolean for whether to emulate
++ *					a CD-ROM drive
++ *	transport=XXX		Default BBB, transport name (CB, CBI, or BBB)
++ *	protocol=YYY		Default SCSI, protocol name (RBC, 8020 or
++ *					ATAPI, QIC, UFI, 8070, or SCSI;
++ *					also 1 - 6)
++ *	vendor=0xVVVV		Default 0x0525 (NetChip), USB Vendor ID
++ *	product=0xPPPP		Default 0xa4a5 (FSG), USB Product ID
++ *	release=0xRRRR		Override the USB release number (bcdDevice)
++ *	buflen=N		Default N=16384, buffer size used (will be
++ *					rounded down to a multiple of
++ *					PAGE_CACHE_SIZE)
++ *
++ * If CONFIG_USB_FILE_STORAGE_TEST is not set, only the "file", "serial", "ro",
++ * "removable", "luns", "nofua", "stall", and "cdrom" options are available;
++ * default values are used for everything else.
++ *
++ * The pathnames of the backing files and the ro settings are available in
++ * the attribute files "file", "nofua", and "ro" in the lun<n> subdirectory of
++ * the gadget's sysfs directory.  If the "removable" option is set, writing to
++ * these files will simulate ejecting/loading the medium (writing an empty
++ * line means eject) and adjusting a write-enable tab.  Changes to the ro
++ * setting are not allowed when the medium is loaded or if CD-ROM emulation
++ * is being used.
++ *
++ * This gadget driver is heavily based on "Gadget Zero" by David Brownell.
++ * The driver's SCSI command interface was based on the "Information
++ * technology - Small Computer System Interface - 2" document from
++ * X3T9.2 Project 375D, Revision 10L, 7-SEP-93, available at
++ * <http://www.t10.org/ftp/t10/drafts/s2/s2-r10l.pdf>.  The single exception
++ * is opcode 0x23 (READ FORMAT CAPACITIES), which was based on the
++ * "Universal Serial Bus Mass Storage Class UFI Command Specification"
++ * document, Revision 1.0, December 14, 1998, available at
++ * <http://www.usb.org/developers/devclass_docs/usbmass-ufi10.pdf>.
++ */
++
++
++/*
++ *				Driver Design
++ *
++ * The FSG driver is fairly straightforward.  There is a main kernel
++ * thread that handles most of the work.  Interrupt routines field
++ * callbacks from the controller driver: bulk- and interrupt-request
++ * completion notifications, endpoint-0 events, and disconnect events.
++ * Completion events are passed to the main thread by wakeup calls.  Many
++ * ep0 requests are handled at interrupt time, but SetInterface,
++ * SetConfiguration, and device reset requests are forwarded to the
++ * thread in the form of "exceptions" using SIGUSR1 signals (since they
++ * should interrupt any ongoing file I/O operations).
++ *
++ * The thread's main routine implements the standard command/data/status
++ * parts of a SCSI interaction.  It and its subroutines are full of tests
++ * for pending signals/exceptions -- all this polling is necessary since
++ * the kernel has no setjmp/longjmp equivalents.  (Maybe this is an
++ * indication that the driver really wants to be running in userspace.)
++ * An important point is that so long as the thread is alive it keeps an
++ * open reference to the backing file.  This will prevent unmounting
++ * the backing file's underlying filesystem and could cause problems
++ * during system shutdown, for example.  To prevent such problems, the
++ * thread catches INT, TERM, and KILL signals and converts them into
++ * an EXIT exception.
++ *
++ * In normal operation the main thread is started during the gadget's
++ * fsg_bind() callback and stopped during fsg_unbind().  But it can also
++ * exit when it receives a signal, and there's no point leaving the
++ * gadget running when the thread is dead.  So just before the thread
++ * exits, it deregisters the gadget driver.  This makes things a little
++ * tricky: The driver is deregistered at two places, and the exiting
++ * thread can indirectly call fsg_unbind() which in turn can tell the
++ * thread to exit.  The first problem is resolved through the use of the
++ * REGISTERED atomic bitflag; the driver will only be deregistered once.
++ * The second problem is resolved by having fsg_unbind() check
++ * fsg->state; it won't try to stop the thread if the state is already
++ * FSG_STATE_TERMINATED.
++ *
++ * To provide maximum throughput, the driver uses a circular pipeline of
++ * buffer heads (struct fsg_buffhd).  In principle the pipeline can be
++ * arbitrarily long; in practice the benefits don't justify having more
++ * than 2 stages (i.e., double buffering).  But it helps to think of the
++ * pipeline as being a long one.  Each buffer head contains a bulk-in and
++ * a bulk-out request pointer (since the buffer can be used for both
++ * output and input -- directions always are given from the host's
++ * point of view) as well as a pointer to the buffer and various state
++ * variables.
++ *
++ * Use of the pipeline follows a simple protocol.  There is a variable
++ * (fsg->next_buffhd_to_fill) that points to the next buffer head to use.
++ * At any time that buffer head may still be in use from an earlier
++ * request, so each buffer head has a state variable indicating whether
++ * it is EMPTY, FULL, or BUSY.  Typical use involves waiting for the
++ * buffer head to be EMPTY, filling the buffer either by file I/O or by
++ * USB I/O (during which the buffer head is BUSY), and marking the buffer
++ * head FULL when the I/O is complete.  Then the buffer will be emptied
++ * (again possibly by USB I/O, during which it is marked BUSY) and
++ * finally marked EMPTY again (possibly by a completion routine).
++ *
++ * A module parameter tells the driver to avoid stalling the bulk
++ * endpoints wherever the transport specification allows.  This is
++ * necessary for some UDCs like the SuperH, which cannot reliably clear a
++ * halt on a bulk endpoint.  However, under certain circumstances the
++ * Bulk-only specification requires a stall.  In such cases the driver
++ * will halt the endpoint and set a flag indicating that it should clear
++ * the halt in software during the next device reset.  Hopefully this
++ * will permit everything to work correctly.  Furthermore, although the
++ * specification allows the bulk-out endpoint to halt when the host sends
++ * too much data, implementing this would cause an unavoidable race.
++ * The driver will always use the "no-stall" approach for OUT transfers.
++ *
++ * One subtle point concerns sending status-stage responses for ep0
++ * requests.  Some of these requests, such as device reset, can involve
++ * interrupting an ongoing file I/O operation, which might take an
++ * arbitrarily long time.  During that delay the host might give up on
++ * the original ep0 request and issue a new one.  When that happens the
++ * driver should not notify the host about completion of the original
++ * request, as the host will no longer be waiting for it.  So the driver
++ * assigns to each ep0 request a unique tag, and it keeps track of the
++ * tag value of the request associated with a long-running exception
++ * (device-reset, interface-change, or configuration-change).  When the
++ * exception handler is finished, the status-stage response is submitted
++ * only if the current ep0 request tag is equal to the exception request
++ * tag.  Thus only the most recently received ep0 request will get a
++ * status-stage response.
++ *
++ * Warning: This driver source file is too long.  It ought to be split up
++ * into a header file plus about 3 separate .c files, to handle the details
++ * of the Gadget, USB Mass Storage, and SCSI protocols.
++ */
++
++
++/* #define VERBOSE_DEBUG */
++/* #define DUMP_MSGS */
++
++
++#include <linux/blkdev.h>
++#include <linux/completion.h>
++#include <linux/dcache.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/fcntl.h>
++#include <linux/file.h>
++#include <linux/fs.h>
++#include <linux/kref.h>
++#include <linux/kthread.h>
++#include <linux/limits.h>
++#include <linux/module.h>
++#include <linux/rwsem.h>
++#include <linux/slab.h>
++#include <linux/spinlock.h>
++#include <linux/string.h>
++#include <linux/freezer.h>
++#include <linux/utsname.h>
++
++#include <linux/usb/ch9.h>
++#include <linux/usb/gadget.h>
++
++#include "gadget_chips.h"
++
++
++
++/*
++ * Kbuild is not very cooperative with respect to linking separately
++ * compiled library objects into one module.  So for now we won't use
++ * separate compilation ... ensuring init/exit sections work to shrink
++ * the runtime footprint, and giving us at least some parts of what
++ * a "gcc --combine ... part1.c part2.c part3.c ... " build would.
++ */
++#include "usbstring.c"
++#include "config.c"
++#include "epautoconf.c"
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_DESC		"File-backed Storage Gadget"
++#define DRIVER_NAME		"g_file_storage"
++#define DRIVER_VERSION		"1 September 2010"
++
++static       char fsg_string_manufacturer[64];
++static const char fsg_string_product[] = DRIVER_DESC;
++static const char fsg_string_config[] = "Self-powered";
++static const char fsg_string_interface[] = "Mass Storage";
++
++
++#include "storage_common.c"
++
++
++MODULE_DESCRIPTION(DRIVER_DESC);
++MODULE_AUTHOR("Alan Stern");
++MODULE_LICENSE("Dual BSD/GPL");
++
++/*
++ * This driver assumes self-powered hardware and has no way for users to
++ * trigger remote wakeup.  It uses autoconfiguration to select endpoints
++ * and endpoint addresses.
++ */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* Encapsulate the module parameter settings */
++
++static struct {
++	char		*file[FSG_MAX_LUNS];
++	char		*serial;
++	bool		ro[FSG_MAX_LUNS];
++	bool		nofua[FSG_MAX_LUNS];
++	unsigned int	num_filenames;
++	unsigned int	num_ros;
++	unsigned int	num_nofuas;
++	unsigned int	nluns;
++
++	bool		removable;
++	bool		can_stall;
++	bool		cdrom;
++
++	char		*transport_parm;
++	char		*protocol_parm;
++	unsigned short	vendor;
++	unsigned short	product;
++	unsigned short	release;
++	unsigned int	buflen;
++
++	int		transport_type;
++	char		*transport_name;
++	int		protocol_type;
++	char		*protocol_name;
++
++} mod_data = {					// Default values
++	.transport_parm		= "BBB",
++	.protocol_parm		= "SCSI",
++	.removable		= 0,
++	.can_stall		= 1,
++	.cdrom			= 0,
++	.vendor			= FSG_VENDOR_ID,
++	.product		= FSG_PRODUCT_ID,
++	.release		= 0xffff,	// Use controller chip type
++	.buflen			= 16384,
++	};
++
++
++module_param_array_named(file, mod_data.file, charp, &mod_data.num_filenames,
++		S_IRUGO);
++MODULE_PARM_DESC(file, "names of backing files or devices");
++
++module_param_named(serial, mod_data.serial, charp, S_IRUGO);
++MODULE_PARM_DESC(serial, "USB serial number");
++
++module_param_array_named(ro, mod_data.ro, bool, &mod_data.num_ros, S_IRUGO);
++MODULE_PARM_DESC(ro, "true to force read-only");
++
++module_param_array_named(nofua, mod_data.nofua, bool, &mod_data.num_nofuas,
++		S_IRUGO);
++MODULE_PARM_DESC(nofua, "true to ignore SCSI WRITE(10,12) FUA bit");
++
++module_param_named(luns, mod_data.nluns, uint, S_IRUGO);
++MODULE_PARM_DESC(luns, "number of LUNs");
++
++module_param_named(removable, mod_data.removable, bool, S_IRUGO);
++MODULE_PARM_DESC(removable, "true to simulate removable media");
++
++module_param_named(stall, mod_data.can_stall, bool, S_IRUGO);
++MODULE_PARM_DESC(stall, "false to prevent bulk stalls");
++
++module_param_named(cdrom, mod_data.cdrom, bool, S_IRUGO);
++MODULE_PARM_DESC(cdrom, "true to emulate cdrom instead of disk");
++
++/* In the non-TEST version, only the module parameters listed above
++ * are available. */
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++module_param_named(transport, mod_data.transport_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(transport, "type of transport (BBB, CBI, or CB)");
++
++module_param_named(protocol, mod_data.protocol_parm, charp, S_IRUGO);
++MODULE_PARM_DESC(protocol, "type of protocol (RBC, 8020, QIC, UFI, "
++		"8070, or SCSI)");
++
++module_param_named(vendor, mod_data.vendor, ushort, S_IRUGO);
++MODULE_PARM_DESC(vendor, "USB Vendor ID");
++
++module_param_named(product, mod_data.product, ushort, S_IRUGO);
++MODULE_PARM_DESC(product, "USB Product ID");
++
++module_param_named(release, mod_data.release, ushort, S_IRUGO);
++MODULE_PARM_DESC(release, "USB release number");
++
++module_param_named(buflen, mod_data.buflen, uint, S_IRUGO);
++MODULE_PARM_DESC(buflen, "I/O buffer size");
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*
++ * These definitions will permit the compiler to avoid generating code for
++ * parts of the driver that aren't used in the non-TEST version.  Even gcc
++ * can recognize when a test of a constant expression yields a dead code
++ * path.
++ */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++
++#define transport_is_bbb()	(mod_data.transport_type == USB_PR_BULK)
++#define transport_is_cbi()	(mod_data.transport_type == USB_PR_CBI)
++#define protocol_is_scsi()	(mod_data.protocol_type == USB_SC_SCSI)
++
++#else
++
++#define transport_is_bbb()	1
++#define transport_is_cbi()	0
++#define protocol_is_scsi()	1
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++
++struct fsg_dev {
++	/* lock protects: state, all the req_busy's, and cbbuf_cmnd */
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++
++	/* filesem protects: backing files in use */
++	struct rw_semaphore	filesem;
++
++	/* reference counting: wait until all LUNs are released */
++	struct kref		ref;
++
++	struct usb_ep		*ep0;		// Handy copy of gadget->ep0
++	struct usb_request	*ep0req;	// For control responses
++	unsigned int		ep0_req_tag;
++	const char		*ep0req_name;
++
++	struct usb_request	*intreq;	// For interrupt responses
++	int			intreq_busy;
++	struct fsg_buffhd	*intr_buffhd;
++
++	unsigned int		bulk_out_maxpacket;
++	enum fsg_state		state;		// For exception handling
++	unsigned int		exception_req_tag;
++
++	u8			config, new_config;
++
++	unsigned int		running : 1;
++	unsigned int		bulk_in_enabled : 1;
++	unsigned int		bulk_out_enabled : 1;
++	unsigned int		intr_in_enabled : 1;
++	unsigned int		phase_error : 1;
++	unsigned int		short_packet_received : 1;
++	unsigned int		bad_lun_okay : 1;
++
++	unsigned long		atomic_bitflags;
++#define REGISTERED		0
++#define IGNORE_BULK_OUT		1
++#define SUSPENDED		2
++
++	struct usb_ep		*bulk_in;
++	struct usb_ep		*bulk_out;
++	struct usb_ep		*intr_in;
++
++	struct fsg_buffhd	*next_buffhd_to_fill;
++	struct fsg_buffhd	*next_buffhd_to_drain;
++
++	int			thread_wakeup_needed;
++	struct completion	thread_notifier;
++	struct task_struct	*thread_task;
++
++	int			cmnd_size;
++	u8			cmnd[MAX_COMMAND_SIZE];
++	enum data_direction	data_dir;
++	u32			data_size;
++	u32			data_size_from_cmnd;
++	u32			tag;
++	unsigned int		lun;
++	u32			residue;
++	u32			usb_amount_left;
++
++	/* The CB protocol offers no way for a host to know when a command
++	 * has completed.  As a result the next command may arrive early,
++	 * and we will still have to handle it.  For that reason we need
++	 * a buffer to store new commands when using CB (or CBI, which
++	 * does not oblige a host to wait for command completion either). */
++	int			cbbuf_cmnd_size;
++	u8			cbbuf_cmnd[MAX_COMMAND_SIZE];
++
++	unsigned int		nluns;
++	struct fsg_lun		*luns;
++	struct fsg_lun		*curlun;
++	/* Must be the last entry */
++	struct fsg_buffhd	buffhds[];
++};
++
++typedef void (*fsg_routine_t)(struct fsg_dev *);
++
++static int exception_in_progress(struct fsg_dev *fsg)
++{
++	return (fsg->state > FSG_STATE_IDLE);
++}
++
++/* Make bulk-out requests be divisible by the maxpacket size */
++static void set_bulk_out_req_length(struct fsg_dev *fsg,
++		struct fsg_buffhd *bh, unsigned int length)
++{
++	unsigned int	rem;
++
++	bh->bulk_out_intended_length = length;
++	rem = length % fsg->bulk_out_maxpacket;
++	if (rem > 0)
++		length += fsg->bulk_out_maxpacket - rem;
++	bh->outreq->length = length;
++}
++
++static struct fsg_dev			*the_fsg;
++static struct usb_gadget_driver		fsg_driver;
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_set_halt(struct fsg_dev *fsg, struct usb_ep *ep)
++{
++	const char	*name;
++
++	if (ep == fsg->bulk_in)
++		name = "bulk-in";
++	else if (ep == fsg->bulk_out)
++		name = "bulk-out";
++	else
++		name = ep->name;
++	DBG(fsg, "%s set halt\n", name);
++	return usb_ep_set_halt(ep);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full) configuration
++ * descriptors are built on demand.  Also the (static) config and interface
++ * descriptors are adjusted during fsg_bind().
++ */
++
++/* There is only one configuration. */
++#define	CONFIG_VALUE		1
++
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	/* The next three values can be overridden by module parameters */
++	.idVendor =		cpu_to_le16(FSG_VENDOR_ID),
++	.idProduct =		cpu_to_le16(FSG_PRODUCT_ID),
++	.bcdDevice =		cpu_to_le16(0xffff),
++
++	.iManufacturer =	FSG_STRING_MANUFACTURER,
++	.iProduct =		FSG_STRING_PRODUCT,
++	.iSerialNumber =	FSG_STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++config_desc = {
++	.bLength =		sizeof config_desc,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* wTotalLength computed by usb_gadget_config_buf() */
++	.bNumInterfaces =	1,
++	.bConfigurationValue =	CONFIG_VALUE,
++	.iConfiguration =	FSG_STRING_CONFIG,
++	.bmAttributes =		USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
++	.bMaxPower =		CONFIG_USB_GADGET_VBUS_DRAW / 2,
++};
++
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		cpu_to_le16(0x0200),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++
++	.bNumConfigurations =	1,
++};
++
++static int populate_bos(struct fsg_dev *fsg, u8 *buf)
++{
++	memcpy(buf, &fsg_bos_desc, USB_DT_BOS_SIZE);
++	buf += USB_DT_BOS_SIZE;
++
++	memcpy(buf, &fsg_ext_cap_desc, USB_DT_USB_EXT_CAP_SIZE);
++	buf += USB_DT_USB_EXT_CAP_SIZE;
++
++	memcpy(buf, &fsg_ss_cap_desc, USB_DT_USB_SS_CAP_SIZE);
++
++	return USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE
++		+ USB_DT_USB_EXT_CAP_SIZE;
++}
++
++/*
++ * Config descriptors must agree with the code that sets configurations
++ * and with code managing interfaces and their altsettings.  They must
++ * also handle different speeds and other-speed requests.
++ */
++static int populate_config_buf(struct usb_gadget *gadget,
++		u8 *buf, u8 type, unsigned index)
++{
++	enum usb_device_speed			speed = gadget->speed;
++	int					len;
++	const struct usb_descriptor_header	**function;
++
++	if (index > 0)
++		return -EINVAL;
++
++	if (gadget_is_dualspeed(gadget) && type == USB_DT_OTHER_SPEED_CONFIG)
++		speed = (USB_SPEED_FULL + USB_SPEED_HIGH) - speed;
++	function = gadget_is_dualspeed(gadget) && speed == USB_SPEED_HIGH
++		? (const struct usb_descriptor_header **)fsg_hs_function
++		: (const struct usb_descriptor_header **)fsg_fs_function;
++
++	/* for now, don't advertise srp-only devices */
++	if (!gadget_is_otg(gadget))
++		function++;
++
++	len = usb_gadget_config_buf(&config_desc, buf, EP0_BUFSIZE, function);
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* These routines may be called in process context or in_irq */
++
++/* Caller must hold fsg->lock */
++static void wakeup_thread(struct fsg_dev *fsg)
++{
++	/* Tell the main thread that something has happened */
++	fsg->thread_wakeup_needed = 1;
++	if (fsg->thread_task)
++		wake_up_process(fsg->thread_task);
++}
++
++
++static void raise_exception(struct fsg_dev *fsg, enum fsg_state new_state)
++{
++	unsigned long		flags;
++
++	/* Do nothing if a higher-priority exception is already in progress.
++	 * If a lower-or-equal priority exception is in progress, preempt it
++	 * and notify the main thread by sending it a signal. */
++	spin_lock_irqsave(&fsg->lock, flags);
++	if (fsg->state <= new_state) {
++		fsg->exception_req_tag = fsg->ep0_req_tag;
++		fsg->state = new_state;
++		if (fsg->thread_task)
++			send_sig_info(SIGUSR1, SEND_SIG_FORCED,
++					fsg->thread_task);
++	}
++	spin_unlock_irqrestore(&fsg->lock, flags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* The disconnect callback and ep0 routines.  These always run in_irq,
++ * except that ep0_queue() is called in the main thread to acknowledge
++ * completion of various requests: set config, set interface, and
++ * Bulk-only device reset. */
++
++static void fsg_disconnect(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "disconnect or port reset\n");
++	raise_exception(fsg, FSG_STATE_DISCONNECT);
++}
++
++
++static int ep0_queue(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = usb_ep_queue(fsg->ep0, fsg->ep0req, GFP_ATOMIC);
++	if (rc != 0 && rc != -ESHUTDOWN) {
++
++		/* We can't do much more than wait for a reset */
++		WARNING(fsg, "error in submission: %s --> %d\n",
++				fsg->ep0->name, rc);
++	}
++	return rc;
++}
++
++static void ep0_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++
++	if (req->actual > 0)
++		dump_msg(fsg, fsg->ep0req_name, req->buf, req->actual);
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	if (req->status == 0 && req->context)
++		((fsg_routine_t) (req->context))(fsg);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Bulk and interrupt endpoint completion handlers.
++ * These always run in_irq. */
++
++static void bulk_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->inreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++static void bulk_out_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	dump_msg(fsg, "bulk-out", req->buf, req->actual);
++	if (req->status || req->actual != bh->bulk_out_intended_length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual,
++				bh->bulk_out_intended_length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	bh->outreq_busy = 0;
++	bh->state = BUF_STATE_FULL;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{
++	struct fsg_dev		*fsg = ep->driver_data;
++	struct fsg_buffhd	*bh = req->context;
++
++	if (req->status || req->actual != req->length)
++		DBG(fsg, "%s --> %d, %u/%u\n", __func__,
++				req->status, req->actual, req->length);
++	if (req->status == -ECONNRESET)		// Request was cancelled
++		usb_ep_fifo_flush(ep);
++
++	/* Hold the lock while we update the request and buffer states */
++	smp_wmb();
++	spin_lock(&fsg->lock);
++	fsg->intreq_busy = 0;
++	bh->state = BUF_STATE_EMPTY;
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void intr_in_complete(struct usb_ep *ep, struct usb_request *req)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 class-specific handlers.  These always run in_irq. */
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request	*req = fsg->ep0req;
++	static u8		cbi_reset_cmnd[6] = {
++			SEND_DIAGNOSTIC, 4, 0xff, 0xff, 0xff, 0xff};
++
++	/* Error in command transfer? */
++	if (req->status || req->length != req->actual ||
++			req->actual < 6 || req->actual > MAX_COMMAND_SIZE) {
++
++		/* Not all controllers allow a protocol stall after
++		 * receiving control-out data, but we'll try anyway. */
++		fsg_set_halt(fsg, fsg->ep0);
++		return;			// Wait for reset
++	}
++
++	/* Is it the special reset command? */
++	if (req->actual >= sizeof cbi_reset_cmnd &&
++			memcmp(req->buf, cbi_reset_cmnd,
++				sizeof cbi_reset_cmnd) == 0) {
++
++		/* Raise an exception to stop the current operation
++		 * and reinitialize our state. */
++		DBG(fsg, "cbi reset request\n");
++		raise_exception(fsg, FSG_STATE_RESET);
++		return;
++	}
++
++	VDBG(fsg, "CB[I] accept device-specific command\n");
++	spin_lock(&fsg->lock);
++
++	/* Save the command for later */
++	if (fsg->cbbuf_cmnd_size)
++		WARNING(fsg, "CB[I] overwriting previous command\n");
++	fsg->cbbuf_cmnd_size = req->actual;
++	memcpy(fsg->cbbuf_cmnd, req->buf, fsg->cbbuf_cmnd_size);
++
++	wakeup_thread(fsg);
++	spin_unlock(&fsg->lock);
++}
++
++#else
++static void received_cbi_adsc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{}
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++
++static int class_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16                     w_value = le16_to_cpu(ctrl->wValue);
++	u16			w_length = le16_to_cpu(ctrl->wLength);
++
++	if (!fsg->config)
++		return value;
++
++	/* Handle Bulk-only class-specific requests */
++	if (transport_is_bbb()) {
++		switch (ctrl->bRequest) {
++
++		case US_BULK_RESET_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 0) {
++				value = -EDOM;
++				break;
++			}
++
++			/* Raise an exception to stop the current operation
++			 * and reinitialize our state. */
++			DBG(fsg, "bulk reset request\n");
++			raise_exception(fsg, FSG_STATE_RESET);
++			value = DELAYED_STATUS;
++			break;
++
++		case US_BULK_GET_MAX_LUN:
++			if (ctrl->bRequestType != (USB_DIR_IN |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0 || w_length != 1) {
++				value = -EDOM;
++				break;
++			}
++			VDBG(fsg, "get max LUN\n");
++			*(u8 *) req->buf = fsg->nluns - 1;
++			value = 1;
++			break;
++		}
++	}
++
++	/* Handle CBI class-specific requests */
++	else {
++		switch (ctrl->bRequest) {
++
++		case USB_CBI_ADSC_REQUEST:
++			if (ctrl->bRequestType != (USB_DIR_OUT |
++					USB_TYPE_CLASS | USB_RECIP_INTERFACE))
++				break;
++			if (w_index != 0 || w_value != 0) {
++				value = -EDOM;
++				break;
++			}
++			if (w_length > MAX_COMMAND_SIZE) {
++				value = -EOVERFLOW;
++				break;
++			}
++			value = w_length;
++			fsg->ep0req->context = received_cbi_adsc;
++			break;
++		}
++	}
++
++	if (value == -EOPNOTSUPP)
++		VDBG(fsg,
++			"unknown class-specific control req "
++			"%02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			le16_to_cpu(ctrl->wValue), w_index, w_length);
++	return value;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Ep0 standard request handlers.  These always run in_irq. */
++
++static int standard_setup_req(struct fsg_dev *fsg,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct usb_request	*req = fsg->ep0req;
++	int			value = -EOPNOTSUPP;
++	u16			w_index = le16_to_cpu(ctrl->wIndex);
++	u16			w_value = le16_to_cpu(ctrl->wValue);
++
++	/* Usually this just stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will also reconfigure hardware. */
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		switch (w_value >> 8) {
++
++		case USB_DT_DEVICE:
++			VDBG(fsg, "get device descriptor\n");
++			device_desc.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof device_desc;
++			memcpy(req->buf, &device_desc, value);
++			break;
++		case USB_DT_DEVICE_QUALIFIER:
++			VDBG(fsg, "get device qualifier\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			/*
++			 * Assume ep0 uses the same maxpacket value for both
++			 * speeds
++			 */
++			dev_qualifier.bMaxPacketSize0 = fsg->ep0->maxpacket;
++			value = sizeof dev_qualifier;
++			memcpy(req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			VDBG(fsg, "get other-speed config descriptor\n");
++			if (!gadget_is_dualspeed(fsg->gadget) ||
++					fsg->gadget->speed == USB_SPEED_SUPER)
++				break;
++			goto get_config;
++		case USB_DT_CONFIG:
++			VDBG(fsg, "get configuration descriptor\n");
++get_config:
++			value = populate_config_buf(fsg->gadget,
++					req->buf,
++					w_value >> 8,
++					w_value & 0xff);
++			break;
++
++		case USB_DT_STRING:
++			VDBG(fsg, "get string descriptor\n");
++
++			/* wIndex == language code */
++			value = usb_gadget_get_string(&fsg_stringtab,
++					w_value & 0xff, req->buf);
++			break;
++
++		case USB_DT_BOS:
++			VDBG(fsg, "get bos descriptor\n");
++
++			if (gadget_is_superspeed(fsg->gadget))
++				value = populate_bos(fsg, req->buf);
++			break;
++		}
++
++		break;
++
++	/* One config, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_OUT | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "set configuration\n");
++		if (w_value == CONFIG_VALUE || w_value == 0) {
++			fsg->new_config = w_value;
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and set the new config. */
++			raise_exception(fsg, FSG_STATE_CONFIG_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_DEVICE))
++			break;
++		VDBG(fsg, "get configuration\n");
++		*(u8 *) req->buf = fsg->config;
++		value = 1;
++		break;
++
++	case USB_REQ_SET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_OUT| USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (fsg->config && w_index == 0) {
++
++			/* Raise an exception to wipe out previous transaction
++			 * state (queued bufs, etc) and install the new
++			 * interface altsetting. */
++			raise_exception(fsg, FSG_STATE_INTERFACE_CHANGE);
++			value = DELAYED_STATUS;
++		}
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if (ctrl->bRequestType != (USB_DIR_IN | USB_TYPE_STANDARD |
++				USB_RECIP_INTERFACE))
++			break;
++		if (!fsg->config)
++			break;
++		if (w_index != 0) {
++			value = -EDOM;
++			break;
++		}
++		VDBG(fsg, "get interface\n");
++		*(u8 *) req->buf = 0;
++		value = 1;
++		break;
++
++	default:
++		VDBG(fsg,
++			"unknown control req %02x.%02x v%04x i%04x l%u\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			w_value, w_index, le16_to_cpu(ctrl->wLength));
++	}
++
++	return value;
++}
++
++
++static int fsg_setup(struct usb_gadget *gadget,
++		const struct usb_ctrlrequest *ctrl)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			rc;
++	int			w_length = le16_to_cpu(ctrl->wLength);
++
++	++fsg->ep0_req_tag;		// Record arrival of a new request
++	fsg->ep0req->context = NULL;
++	fsg->ep0req->length = 0;
++	dump_msg(fsg, "ep0-setup", (u8 *) ctrl, sizeof(*ctrl));
++
++	if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_CLASS)
++		rc = class_setup_req(fsg, ctrl);
++	else
++		rc = standard_setup_req(fsg, ctrl);
++
++	/* Respond with data/status or defer until later? */
++	if (rc >= 0 && rc != DELAYED_STATUS) {
++		rc = min(rc, w_length);
++		fsg->ep0req->length = rc;
++		fsg->ep0req->zero = rc < w_length;
++		fsg->ep0req_name = (ctrl->bRequestType & USB_DIR_IN ?
++				"ep0-in" : "ep0-out");
++		rc = ep0_queue(fsg);
++	}
++
++	/* Device either stalls (rc < 0) or reports success */
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* All the following routines run in process context */
++
++
++/* Use this for bulk or interrupt transfers, not ep0 */
++static void start_transfer(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request *req, int *pbusy,
++		enum fsg_buffer_state *state)
++{
++	int	rc;
++
++	if (ep == fsg->bulk_in)
++		dump_msg(fsg, "bulk-in", req->buf, req->length);
++	else if (ep == fsg->intr_in)
++		dump_msg(fsg, "intr-in", req->buf, req->length);
++
++	spin_lock_irq(&fsg->lock);
++	*pbusy = 1;
++	*state = BUF_STATE_BUSY;
++	spin_unlock_irq(&fsg->lock);
++	rc = usb_ep_queue(ep, req, GFP_KERNEL);
++	if (rc != 0) {
++		*pbusy = 0;
++		*state = BUF_STATE_EMPTY;
++
++		/* We can't do much more than wait for a reset */
++
++		/* Note: currently the net2280 driver fails zero-length
++		 * submissions if DMA is enabled. */
++		if (rc != -ESHUTDOWN && !(rc == -EOPNOTSUPP &&
++						req->length == 0))
++			WARNING(fsg, "error in submission: %s --> %d\n",
++					ep->name, rc);
++	}
++}
++
++
++static int sleep_thread(struct fsg_dev *fsg)
++{
++	int	rc = 0;
++
++	/* Wait until a signal arrives or we are woken up */
++	for (;;) {
++		try_to_freeze();
++		set_current_state(TASK_INTERRUPTIBLE);
++		if (signal_pending(current)) {
++			rc = -EINTR;
++			break;
++		}
++		if (fsg->thread_wakeup_needed)
++			break;
++		schedule();
++	}
++	__set_current_state(TASK_RUNNING);
++	fsg->thread_wakeup_needed = 0;
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_read(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u32			amount_left;
++	loff_t			file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == READ_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = don't read from the
++		 * cache), but we don't implement them. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Carry out the file reads */
++	amount_left = fsg->data_size_from_cmnd;
++	if (unlikely(amount_left == 0))
++		return -EIO;		// No default reply
++
++	for (;;) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount.
++		 * But don't read more than the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* If we were asked to read past the end of file,
++		 * end with an empty buffer. */
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			bh->inreq->length = 0;
++			bh->state = BUF_STATE_FULL;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file read: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file read: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		file_offset  += nread;
++		amount_left  -= nread;
++		fsg->residue -= nread;
++
++		/* Except at the end of the transfer, nread will be
++		 * equal to the buffer size, which is divisible by the
++		 * bulk-in maxpacket size.
++		 */
++		bh->inreq->length = nread;
++		bh->state = BUF_STATE_FULL;
++
++		/* If an error occurred, report it and its position */
++		if (nread < amount) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		if (amount_left == 0)
++			break;		// No more left to read
++
++		/* Send this buffer and go read some more */
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++		fsg->next_buffhd_to_fill = bh->next;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_write(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	struct fsg_buffhd	*bh;
++	int			get_some_more;
++	u32			amount_left_to_req, amount_left_to_write;
++	loff_t			usb_offset, file_offset, file_offset_tmp;
++	unsigned int		amount;
++	ssize_t			nwritten;
++	int			rc;
++
++	if (curlun->ro) {
++		curlun->sense_data = SS_WRITE_PROTECTED;
++		return -EINVAL;
++	}
++	spin_lock(&curlun->filp->f_lock);
++	curlun->filp->f_flags &= ~O_SYNC;	// Default is not to wait
++	spin_unlock(&curlun->filp->f_lock);
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	if (fsg->cmnd[0] == WRITE_6)
++		lba = get_unaligned_be24(&fsg->cmnd[1]);
++	else {
++		lba = get_unaligned_be32(&fsg->cmnd[2]);
++
++		/* We allow DPO (Disable Page Out = don't save data in the
++		 * cache) and FUA (Force Unit Access = write directly to the
++		 * medium).  We don't implement DPO; we implement FUA by
++		 * performing synchronous output. */
++		if ((fsg->cmnd[1] & ~0x18) != 0) {
++			curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++		/* FUA */
++		if (!curlun->nofua && (fsg->cmnd[1] & 0x08)) {
++			spin_lock(&curlun->filp->f_lock);
++			curlun->filp->f_flags |= O_DSYNC;
++			spin_unlock(&curlun->filp->f_lock);
++		}
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* Carry out the file writes */
++	get_some_more = 1;
++	file_offset = usb_offset = ((loff_t) lba) << curlun->blkbits;
++	amount_left_to_req = amount_left_to_write = fsg->data_size_from_cmnd;
++
++	while (amount_left_to_write > 0) {
++
++		/* Queue a request for more data from the host */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && get_some_more) {
++
++			/* Figure out how much we want to get:
++			 * Try to get the remaining amount,
++			 * but not more than the buffer size.
++			 */
++			amount = min(amount_left_to_req, mod_data.buflen);
++
++			/* Beyond the end of the backing file? */
++			if (usb_offset >= curlun->file_length) {
++				get_some_more = 0;
++				curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++				curlun->sense_data_info = usb_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				continue;
++			}
++
++			/* Get the next buffer */
++			usb_offset += amount;
++			fsg->usb_amount_left -= amount;
++			amount_left_to_req -= amount;
++			if (amount_left_to_req == 0)
++				get_some_more = 0;
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			continue;
++		}
++
++		/* Write the received data to the backing file */
++		bh = fsg->next_buffhd_to_drain;
++		if (bh->state == BUF_STATE_EMPTY && !get_some_more)
++			break;			// We stopped early
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			fsg->next_buffhd_to_drain = bh->next;
++			bh->state = BUF_STATE_EMPTY;
++
++			/* Did something go wrong with the transfer? */
++			if (bh->outreq->status != 0) {
++				curlun->sense_data = SS_COMMUNICATION_FAILURE;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++			amount = bh->outreq->actual;
++			if (curlun->file_length - file_offset < amount) {
++				LERROR(curlun,
++	"write %u @ %llu beyond end %llu\n",
++	amount, (unsigned long long) file_offset,
++	(unsigned long long) curlun->file_length);
++				amount = curlun->file_length - file_offset;
++			}
++
++			/* Don't accept excess data.  The spec doesn't say
++			 * what to do in this case.  We'll ignore the error.
++			 */
++			amount = min(amount, bh->bulk_out_intended_length);
++
++			/* Don't write a partial block */
++			amount = round_down(amount, curlun->blksize);
++			if (amount == 0)
++				goto empty_write;
++
++			/* Perform the write */
++			file_offset_tmp = file_offset;
++			nwritten = vfs_write(curlun->filp,
++					(char __user *) bh->buf,
++					amount, &file_offset_tmp);
++			VLDBG(curlun, "file write %u @ %llu -> %d\n", amount,
++					(unsigned long long) file_offset,
++					(int) nwritten);
++			if (signal_pending(current))
++				return -EINTR;		// Interrupted!
++
++			if (nwritten < 0) {
++				LDBG(curlun, "error in file write: %d\n",
++						(int) nwritten);
++				nwritten = 0;
++			} else if (nwritten < amount) {
++				LDBG(curlun, "partial file write: %d/%u\n",
++						(int) nwritten, amount);
++				nwritten = round_down(nwritten, curlun->blksize);
++			}
++			file_offset += nwritten;
++			amount_left_to_write -= nwritten;
++			fsg->residue -= nwritten;
++
++			/* If an error occurred, report it and its position */
++			if (nwritten < amount) {
++				curlun->sense_data = SS_WRITE_ERROR;
++				curlun->sense_data_info = file_offset >> curlun->blkbits;
++				curlun->info_valid = 1;
++				break;
++			}
++
++ empty_write:
++			/* Did the host decide to stop early? */
++			if (bh->outreq->actual < bh->bulk_out_intended_length) {
++				fsg->short_packet_received = 1;
++				break;
++			}
++			continue;
++		}
++
++		/* Wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	return -EIO;		// No default reply
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_synchronize_cache(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		rc;
++
++	/* We ignore the requested LBA and write out all file's
++	 * dirty data buffers. */
++	rc = fsg_lun_fsync_sub(curlun);
++	if (rc)
++		curlun->sense_data = SS_WRITE_ERROR;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void invalidate_sub(struct fsg_lun *curlun)
++{
++	struct file	*filp = curlun->filp;
++	struct inode	*inode = filp->f_path.dentry->d_inode;
++	unsigned long	rc;
++
++	rc = invalidate_mapping_pages(inode->i_mapping, 0, -1);
++	VLDBG(curlun, "invalidate_mapping_pages -> %ld\n", rc);
++}
++
++static int do_verify(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	u32			lba;
++	u32			verification_length;
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	loff_t			file_offset, file_offset_tmp;
++	u32			amount_left;
++	unsigned int		amount;
++	ssize_t			nread;
++
++	/* Get the starting Logical Block Address and check that it's
++	 * not too big */
++	lba = get_unaligned_be32(&fsg->cmnd[2]);
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	/* We allow DPO (Disable Page Out = don't save data in the
++	 * cache) but we don't implement it. */
++	if ((fsg->cmnd[1] & ~0x10) != 0) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	verification_length = get_unaligned_be16(&fsg->cmnd[7]);
++	if (unlikely(verification_length == 0))
++		return -EIO;		// No default reply
++
++	/* Prepare to carry out the file verify */
++	amount_left = verification_length << curlun->blkbits;
++	file_offset = ((loff_t) lba) << curlun->blkbits;
++
++	/* Write out all the dirty buffers before invalidating them */
++	fsg_lun_fsync_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	invalidate_sub(curlun);
++	if (signal_pending(current))
++		return -EINTR;
++
++	/* Just try to read the requested blocks */
++	while (amount_left > 0) {
++
++		/* Figure out how much we need to read:
++		 * Try to read the remaining amount, but not more than
++		 * the buffer size.
++		 * And don't try to read past the end of the file.
++		 */
++		amount = min((unsigned int) amount_left, mod_data.buflen);
++		amount = min((loff_t) amount,
++				curlun->file_length - file_offset);
++		if (amount == 0) {
++			curlun->sense_data =
++					SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++
++		/* Perform the read */
++		file_offset_tmp = file_offset;
++		nread = vfs_read(curlun->filp,
++				(char __user *) bh->buf,
++				amount, &file_offset_tmp);
++		VLDBG(curlun, "file read %u @ %llu -> %d\n", amount,
++				(unsigned long long) file_offset,
++				(int) nread);
++		if (signal_pending(current))
++			return -EINTR;
++
++		if (nread < 0) {
++			LDBG(curlun, "error in file verify: %d\n",
++					(int) nread);
++			nread = 0;
++		} else if (nread < amount) {
++			LDBG(curlun, "partial file verify: %d/%u\n",
++					(int) nread, amount);
++			nread = round_down(nread, curlun->blksize);
++		}
++		if (nread == 0) {
++			curlun->sense_data = SS_UNRECOVERED_READ_ERROR;
++			curlun->sense_data_info = file_offset >> curlun->blkbits;
++			curlun->info_valid = 1;
++			break;
++		}
++		file_offset += nread;
++		amount_left -= nread;
++	}
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int do_inquiry(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	u8	*buf = (u8 *) bh->buf;
++
++	static char vendor_id[] = "Linux   ";
++	static char product_disk_id[] = "File-Stor Gadget";
++	static char product_cdrom_id[] = "File-CD Gadget  ";
++
++	if (!fsg->curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		memset(buf, 0, 36);
++		buf[0] = 0x7f;		// Unsupported, no device-type
++		buf[4] = 31;		// Additional length
++		return 36;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = (mod_data.cdrom ? TYPE_ROM : TYPE_DISK);
++	if (mod_data.removable)
++		buf[1] = 0x80;
++	buf[2] = 2;		// ANSI SCSI level 2
++	buf[3] = 2;		// SCSI-2 INQUIRY data format
++	buf[4] = 31;		// Additional length
++				// No special options
++	sprintf(buf + 8, "%-8s%-16s%04x", vendor_id,
++			(mod_data.cdrom ? product_cdrom_id :
++				product_disk_id),
++			mod_data.release);
++	return 36;
++}
++
++
++static int do_request_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++	u32		sd, sdinfo;
++	int		valid;
++
++	/*
++	 * From the SCSI-2 spec., section 7.9 (Unit attention condition):
++	 *
++	 * If a REQUEST SENSE command is received from an initiator
++	 * with a pending unit attention condition (before the target
++	 * generates the contingent allegiance condition), then the
++	 * target shall either:
++	 *   a) report any pending sense data and preserve the unit
++	 *	attention condition on the logical unit, or,
++	 *   b) report the unit attention condition, may discard any
++	 *	pending sense data, and clear the unit attention
++	 *	condition on the logical unit for that initiator.
++	 *
++	 * FSG normally uses option a); enable this code to use option b).
++	 */
++#if 0
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++	}
++#endif
++
++	if (!curlun) {		// Unsupported LUNs are okay
++		fsg->bad_lun_okay = 1;
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++		sdinfo = 0;
++		valid = 0;
++	} else {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++		valid = curlun->info_valid << 7;
++		curlun->sense_data = SS_NO_SENSE;
++		curlun->sense_data_info = 0;
++		curlun->info_valid = 0;
++	}
++
++	memset(buf, 0, 18);
++	buf[0] = valid | 0x70;			// Valid, current error
++	buf[2] = SK(sd);
++	put_unaligned_be32(sdinfo, &buf[3]);	/* Sense information */
++	buf[7] = 18 - 8;			// Additional sense length
++	buf[12] = ASC(sd);
++	buf[13] = ASCQ(sd);
++	return 18;
++}
++
++
++static int do_read_capacity(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	int		pmi = fsg->cmnd[8];
++	u8		*buf = (u8 *) bh->buf;
++
++	/* Check the PMI and LBA fields */
++	if (pmi > 1 || (pmi == 0 && lba != 0)) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	put_unaligned_be32(curlun->num_sectors - 1, &buf[0]);
++						/* Max logical block */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	return 8;
++}
++
++
++static int do_read_header(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	u32		lba = get_unaligned_be32(&fsg->cmnd[2]);
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0) {		/* Mask away MSF */
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	if (lba >= curlun->num_sectors) {
++		curlun->sense_data = SS_LOGICAL_BLOCK_ADDRESS_OUT_OF_RANGE;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 8);
++	buf[0] = 0x01;		/* 2048 bytes of user data, rest is EC */
++	store_cdrom_address(&buf[4], msf, lba);
++	return 8;
++}
++
++
++static int do_read_toc(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		msf = fsg->cmnd[1] & 0x02;
++	int		start_track = fsg->cmnd[6];
++	u8		*buf = (u8 *) bh->buf;
++
++	if ((fsg->cmnd[1] & ~0x02) != 0 ||		/* Mask away MSF */
++			start_track > 1) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	memset(buf, 0, 20);
++	buf[1] = (20-2);		/* TOC data length */
++	buf[2] = 1;			/* First track number */
++	buf[3] = 1;			/* Last track number */
++	buf[5] = 0x16;			/* Data track, copying allowed */
++	buf[6] = 0x01;			/* Only track is number 1 */
++	store_cdrom_address(&buf[8], msf, 0);
++
++	buf[13] = 0x16;			/* Lead-out track is data */
++	buf[14] = 0xAA;			/* Lead-out track number */
++	store_cdrom_address(&buf[16], msf, curlun->num_sectors);
++	return 20;
++}
++
++
++static int do_mode_sense(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		mscmnd = fsg->cmnd[0];
++	u8		*buf = (u8 *) bh->buf;
++	u8		*buf0 = buf;
++	int		pc, page_code;
++	int		changeable_values, all_pages;
++	int		valid_page = 0;
++	int		len, limit;
++
++	if ((fsg->cmnd[1] & ~0x08) != 0) {		// Mask away DBD
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++	pc = fsg->cmnd[2] >> 6;
++	page_code = fsg->cmnd[2] & 0x3f;
++	if (pc == 3) {
++		curlun->sense_data = SS_SAVING_PARAMETERS_NOT_SUPPORTED;
++		return -EINVAL;
++	}
++	changeable_values = (pc == 1);
++	all_pages = (page_code == 0x3f);
++
++	/* Write the mode parameter header.  Fixed values are: default
++	 * medium type, no cache control (DPOFUA), and no block descriptors.
++	 * The only variable value is the WriteProtect bit.  We will fill in
++	 * the mode data length later. */
++	memset(buf, 0, 8);
++	if (mscmnd == MODE_SENSE) {
++		buf[2] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 4;
++		limit = 255;
++	} else {			// MODE_SENSE_10
++		buf[3] = (curlun->ro ? 0x80 : 0x00);		// WP, DPOFUA
++		buf += 8;
++		limit = 65535;		// Should really be mod_data.buflen
++	}
++
++	/* No block descriptors */
++
++	/* The mode pages, in numerical order.  The only page we support
++	 * is the Caching page. */
++	if (page_code == 0x08 || all_pages) {
++		valid_page = 1;
++		buf[0] = 0x08;		// Page code
++		buf[1] = 10;		// Page length
++		memset(buf+2, 0, 10);	// None of the fields are changeable
++
++		if (!changeable_values) {
++			buf[2] = 0x04;	// Write cache enable,
++					// Read cache not disabled
++					// No cache retention priorities
++			put_unaligned_be16(0xffff, &buf[4]);
++					/* Don't disable prefetch */
++					/* Minimum prefetch = 0 */
++			put_unaligned_be16(0xffff, &buf[8]);
++					/* Maximum prefetch */
++			put_unaligned_be16(0xffff, &buf[10]);
++					/* Maximum prefetch ceiling */
++		}
++		buf += 12;
++	}
++
++	/* Check that a valid page was requested and the mode data length
++	 * isn't too long. */
++	len = buf - buf0;
++	if (!valid_page || len > limit) {
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	/*  Store the mode data length */
++	if (mscmnd == MODE_SENSE)
++		buf0[0] = len - 1;
++	else
++		put_unaligned_be16(len - 2, buf0);
++	return len;
++}
++
++
++static int do_start_stop(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		loej, start;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	// int immed = fsg->cmnd[1] & 0x01;
++	loej = fsg->cmnd[4] & 0x02;
++	start = fsg->cmnd[4] & 0x01;
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if ((fsg->cmnd[1] & ~0x01) != 0 ||		// Mask away Immed
++			(fsg->cmnd[4] & ~0x03) != 0) {	// Mask LoEj, Start
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (!start) {
++
++		/* Are we allowed to unload the media? */
++		if (curlun->prevent_medium_removal) {
++			LDBG(curlun, "unload attempt prevented\n");
++			curlun->sense_data = SS_MEDIUM_REMOVAL_PREVENTED;
++			return -EINVAL;
++		}
++		if (loej) {		// Simulate an unload/eject
++			up_read(&fsg->filesem);
++			down_write(&fsg->filesem);
++			fsg_lun_close(curlun);
++			up_write(&fsg->filesem);
++			down_read(&fsg->filesem);
++		}
++	} else {
++
++		/* Our emulation doesn't support mounting; the medium is
++		 * available for use as soon as it is loaded. */
++		if (!fsg_lun_is_open(curlun)) {
++			curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++			return -EINVAL;
++		}
++	}
++#endif
++	return 0;
++}
++
++
++static int do_prevent_allow(struct fsg_dev *fsg)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	int		prevent;
++
++	if (!mod_data.removable) {
++		curlun->sense_data = SS_INVALID_COMMAND;
++		return -EINVAL;
++	}
++
++	prevent = fsg->cmnd[4] & 0x01;
++	if ((fsg->cmnd[4] & ~0x01) != 0) {		// Mask away Prevent
++		curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++		return -EINVAL;
++	}
++
++	if (curlun->prevent_medium_removal && !prevent)
++		fsg_lun_fsync_sub(curlun);
++	curlun->prevent_medium_removal = prevent;
++	return 0;
++}
++
++
++static int do_read_format_capacities(struct fsg_dev *fsg,
++			struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++	u8		*buf = (u8 *) bh->buf;
++
++	buf[0] = buf[1] = buf[2] = 0;
++	buf[3] = 8;		// Only the Current/Maximum Capacity Descriptor
++	buf += 4;
++
++	put_unaligned_be32(curlun->num_sectors, &buf[0]);
++						/* Number of blocks */
++	put_unaligned_be32(curlun->blksize, &buf[4]);	/* Block length */
++	buf[4] = 0x02;				/* Current capacity */
++	return 12;
++}
++
++
++static int do_mode_select(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct fsg_lun	*curlun = fsg->curlun;
++
++	/* We don't support MODE SELECT */
++	curlun->sense_data = SS_INVALID_COMMAND;
++	return -EINVAL;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int halt_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	rc = fsg_set_halt(fsg, fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint halt\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_halt -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_halt(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int wedge_bulk_in_endpoint(struct fsg_dev *fsg)
++{
++	int	rc;
++
++	DBG(fsg, "bulk-in set wedge\n");
++	rc = usb_ep_set_wedge(fsg->bulk_in);
++	if (rc == -EAGAIN)
++		VDBG(fsg, "delayed bulk-in endpoint wedge\n");
++	while (rc != 0) {
++		if (rc != -EAGAIN) {
++			WARNING(fsg, "usb_ep_set_wedge -> %d\n", rc);
++			rc = 0;
++			break;
++		}
++
++		/* Wait for a short time and then try again */
++		if (msleep_interruptible(100) != 0)
++			return -EINTR;
++		rc = usb_ep_set_wedge(fsg->bulk_in);
++	}
++	return rc;
++}
++
++static int throw_away_data(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	u32			amount;
++	int			rc;
++
++	while ((bh = fsg->next_buffhd_to_drain)->state != BUF_STATE_EMPTY ||
++			fsg->usb_amount_left > 0) {
++
++		/* Throw away the data in a filled buffer */
++		if (bh->state == BUF_STATE_FULL) {
++			smp_rmb();
++			bh->state = BUF_STATE_EMPTY;
++			fsg->next_buffhd_to_drain = bh->next;
++
++			/* A short packet or an error ends everything */
++			if (bh->outreq->actual < bh->bulk_out_intended_length ||
++					bh->outreq->status != 0) {
++				raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++				return -EINTR;
++			}
++			continue;
++		}
++
++		/* Try to submit another request if we need one */
++		bh = fsg->next_buffhd_to_fill;
++		if (bh->state == BUF_STATE_EMPTY && fsg->usb_amount_left > 0) {
++			amount = min(fsg->usb_amount_left,
++					(u32) mod_data.buflen);
++
++			/* Except at the end of the transfer, amount will be
++			 * equal to the buffer size, which is divisible by
++			 * the bulk-out maxpacket size.
++			 */
++			set_bulk_out_req_length(fsg, bh, amount);
++			start_transfer(fsg, fsg->bulk_out, bh->outreq,
++					&bh->outreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			fsg->usb_amount_left -= amount;
++			continue;
++		}
++
++		/* Otherwise wait for something to happen */
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	return 0;
++}
++
++
++static int finish_reply(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh = fsg->next_buffhd_to_fill;
++	int			rc = 0;
++
++	switch (fsg->data_dir) {
++	case DATA_DIR_NONE:
++		break;			// Nothing to send
++
++	/* If we don't know whether the host wants to read or write,
++	 * this must be CB or CBI with an unknown command.  We mustn't
++	 * try to send or receive any data.  So stall both bulk pipes
++	 * if we can and wait for a reset. */
++	case DATA_DIR_UNKNOWN:
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* All but the last buffer of data must have already been sent */
++	case DATA_DIR_TO_HOST:
++		if (fsg->data_size == 0)
++			;		// Nothing to send
++
++		/* If there's no residue, simply send the last buffer */
++		else if (fsg->residue == 0) {
++			bh->inreq->zero = 0;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++		}
++
++		/* There is a residue.  For CB and CBI, simply mark the end
++		 * of the data with a short packet.  However, if we are
++		 * allowed to stall, there was no data at all (residue ==
++		 * data_size), and the command failed (invalid LUN or
++		 * sense data is set), then halt the bulk-in endpoint
++		 * instead. */
++		else if (!transport_is_bbb()) {
++			if (mod_data.can_stall &&
++					fsg->residue == fsg->data_size &&
++	(!fsg->curlun || fsg->curlun->sense_data != SS_NO_SENSE)) {
++				bh->state = BUF_STATE_EMPTY;
++				rc = halt_bulk_in_endpoint(fsg);
++			} else {
++				bh->inreq->zero = 1;
++				start_transfer(fsg, fsg->bulk_in, bh->inreq,
++						&bh->inreq_busy, &bh->state);
++				fsg->next_buffhd_to_fill = bh->next;
++			}
++		}
++
++		/*
++		 * For Bulk-only, mark the end of the data with a short
++		 * packet.  If we are allowed to stall, halt the bulk-in
++		 * endpoint.  (Note: This violates the Bulk-Only Transport
++		 * specification, which requires us to pad the data if we
++		 * don't halt the endpoint.  Presumably nobody will mind.)
++		 */
++		else {
++			bh->inreq->zero = 1;
++			start_transfer(fsg, fsg->bulk_in, bh->inreq,
++					&bh->inreq_busy, &bh->state);
++			fsg->next_buffhd_to_fill = bh->next;
++			if (mod_data.can_stall)
++				rc = halt_bulk_in_endpoint(fsg);
++		}
++		break;
++
++	/* We have processed all we want from the data the host has sent.
++	 * There may still be outstanding bulk-out requests. */
++	case DATA_DIR_FROM_HOST:
++		if (fsg->residue == 0)
++			;		// Nothing to receive
++
++		/* Did the host stop sending unexpectedly early? */
++		else if (fsg->short_packet_received) {
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++
++		/* We haven't processed all the incoming data.  Even though
++		 * we may be allowed to stall, doing so would cause a race.
++		 * The controller may already have ACK'ed all the remaining
++		 * bulk-out packets, in which case the host wouldn't see a
++		 * STALL.  Not realizing the endpoint was halted, it wouldn't
++		 * clear the halt -- leading to problems later on. */
++#if 0
++		else if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			raise_exception(fsg, FSG_STATE_ABORT_BULK_OUT);
++			rc = -EINTR;
++		}
++#endif
++
++		/* We can't stall.  Read in the excess data and throw it
++		 * all away. */
++		else
++			rc = throw_away_data(fsg);
++		break;
++	}
++	return rc;
++}
++
++
++static int send_status(struct fsg_dev *fsg)
++{
++	struct fsg_lun		*curlun = fsg->curlun;
++	struct fsg_buffhd	*bh;
++	int			rc;
++	u8			status = US_BULK_STAT_OK;
++	u32			sd, sdinfo = 0;
++
++	/* Wait for the next buffer to become available */
++	bh = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++
++	if (curlun) {
++		sd = curlun->sense_data;
++		sdinfo = curlun->sense_data_info;
++	} else if (fsg->bad_lun_okay)
++		sd = SS_NO_SENSE;
++	else
++		sd = SS_LOGICAL_UNIT_NOT_SUPPORTED;
++
++	if (fsg->phase_error) {
++		DBG(fsg, "sending phase-error status\n");
++		status = US_BULK_STAT_PHASE;
++		sd = SS_INVALID_COMMAND;
++	} else if (sd != SS_NO_SENSE) {
++		DBG(fsg, "sending command-failure status\n");
++		status = US_BULK_STAT_FAIL;
++		VDBG(fsg, "  sense data: SK x%02x, ASC x%02x, ASCQ x%02x;"
++				"  info x%x\n",
++				SK(sd), ASC(sd), ASCQ(sd), sdinfo);
++	}
++
++	if (transport_is_bbb()) {
++		struct bulk_cs_wrap	*csw = bh->buf;
++
++		/* Store and send the Bulk-only CSW */
++		csw->Signature = cpu_to_le32(US_BULK_CS_SIGN);
++		csw->Tag = fsg->tag;
++		csw->Residue = cpu_to_le32(fsg->residue);
++		csw->Status = status;
++
++		bh->inreq->length = US_BULK_CS_WRAP_LEN;
++		bh->inreq->zero = 0;
++		start_transfer(fsg, fsg->bulk_in, bh->inreq,
++				&bh->inreq_busy, &bh->state);
++
++	} else if (mod_data.transport_type == USB_PR_CB) {
++
++		/* Control-Bulk transport has no status phase! */
++		return 0;
++
++	} else {			// USB_PR_CBI
++		struct interrupt_data	*buf = bh->buf;
++
++		/* Store and send the Interrupt data.  UFI sends the ASC
++		 * and ASCQ bytes.  Everything else sends a Type (which
++		 * is always 0) and the status Value. */
++		if (mod_data.protocol_type == USB_SC_UFI) {
++			buf->bType = ASC(sd);
++			buf->bValue = ASCQ(sd);
++		} else {
++			buf->bType = 0;
++			buf->bValue = status;
++		}
++		fsg->intreq->length = CBI_INTERRUPT_DATA_LEN;
++
++		fsg->intr_buffhd = bh;		// Point to the right buffhd
++		fsg->intreq->buf = bh->inreq->buf;
++		fsg->intreq->context = bh;
++		start_transfer(fsg, fsg->intr_in, fsg->intreq,
++				&fsg->intreq_busy, &bh->state);
++	}
++
++	fsg->next_buffhd_to_fill = bh->next;
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++/* Check whether the command is properly formed and whether its data size
++ * and direction agree with the values we already have. */
++static int check_command(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	int			i;
++	int			lun = fsg->cmnd[1] >> 5;
++	static const char	dirletter[4] = {'u', 'o', 'i', 'n'};
++	char			hdlen[20];
++	struct fsg_lun		*curlun;
++
++	/* Adjust the expected cmnd_size for protocol encapsulation padding.
++	 * Transparent SCSI doesn't pad. */
++	if (protocol_is_scsi())
++		;
++
++	/* There's some disagreement as to whether RBC pads commands or not.
++	 * We'll play it safe and accept either form. */
++	else if (mod_data.protocol_type == USB_SC_RBC) {
++		if (fsg->cmnd_size == 12)
++			cmnd_size = 12;
++
++	/* All the other protocols pad to 12 bytes */
++	} else
++		cmnd_size = 12;
++
++	hdlen[0] = 0;
++	if (fsg->data_dir != DATA_DIR_UNKNOWN)
++		sprintf(hdlen, ", H%c=%u", dirletter[(int) fsg->data_dir],
++				fsg->data_size);
++	VDBG(fsg, "SCSI command: %s;  Dc=%d, D%c=%u;  Hc=%d%s\n",
++			name, cmnd_size, dirletter[(int) data_dir],
++			fsg->data_size_from_cmnd, fsg->cmnd_size, hdlen);
++
++	/* We can't reply at all until we know the correct data direction
++	 * and size. */
++	if (fsg->data_size_from_cmnd == 0)
++		data_dir = DATA_DIR_NONE;
++	if (fsg->data_dir == DATA_DIR_UNKNOWN) {	// CB or CBI
++		fsg->data_dir = data_dir;
++		fsg->data_size = fsg->data_size_from_cmnd;
++
++	} else {					// Bulk-only
++		if (fsg->data_size < fsg->data_size_from_cmnd) {
++
++			/* Host data size < Device data size is a phase error.
++			 * Carry out the command, but only transfer as much
++			 * as we are allowed. */
++			fsg->data_size_from_cmnd = fsg->data_size;
++			fsg->phase_error = 1;
++		}
++	}
++	fsg->residue = fsg->usb_amount_left = fsg->data_size;
++
++	/* Conflicting data directions is a phase error */
++	if (fsg->data_dir != data_dir && fsg->data_size_from_cmnd > 0) {
++		fsg->phase_error = 1;
++		return -EINVAL;
++	}
++
++	/* Verify the length of the command itself */
++	if (cmnd_size != fsg->cmnd_size) {
++
++		/* Special case workaround: There are plenty of buggy SCSI
++		 * implementations. Many have issues with cbw->Length
++		 * field passing a wrong command size. For those cases we
++		 * always try to work around the problem by using the length
++		 * sent by the host side provided it is at least as large
++		 * as the correct command length.
++		 * Examples of such cases would be MS-Windows, which issues
++		 * REQUEST SENSE with cbw->Length == 12 where it should
++		 * be 6, and xbox360 issuing INQUIRY, TEST UNIT READY and
++		 * REQUEST SENSE with cbw->Length == 10 where it should
++		 * be 6 as well.
++		 */
++		if (cmnd_size <= fsg->cmnd_size) {
++			DBG(fsg, "%s is buggy! Expected length %d "
++					"but we got %d\n", name,
++					cmnd_size, fsg->cmnd_size);
++			cmnd_size = fsg->cmnd_size;
++		} else {
++			fsg->phase_error = 1;
++			return -EINVAL;
++		}
++	}
++
++	/* Check that the LUN values are consistent */
++	if (transport_is_bbb()) {
++		if (fsg->lun != lun)
++			DBG(fsg, "using LUN %d from CBW, "
++					"not LUN %d from CDB\n",
++					fsg->lun, lun);
++	}
++
++	/* Check the LUN */
++	curlun = fsg->curlun;
++	if (curlun) {
++		if (fsg->cmnd[0] != REQUEST_SENSE) {
++			curlun->sense_data = SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++	} else {
++		fsg->bad_lun_okay = 0;
++
++		/* INQUIRY and REQUEST SENSE commands are explicitly allowed
++		 * to use unsupported LUNs; all others may not. */
++		if (fsg->cmnd[0] != INQUIRY &&
++				fsg->cmnd[0] != REQUEST_SENSE) {
++			DBG(fsg, "unsupported LUN %d\n", fsg->lun);
++			return -EINVAL;
++		}
++	}
++
++	/* If a unit attention condition exists, only INQUIRY and
++	 * REQUEST SENSE commands are allowed; anything else must fail. */
++	if (curlun && curlun->unit_attention_data != SS_NO_SENSE &&
++			fsg->cmnd[0] != INQUIRY &&
++			fsg->cmnd[0] != REQUEST_SENSE) {
++		curlun->sense_data = curlun->unit_attention_data;
++		curlun->unit_attention_data = SS_NO_SENSE;
++		return -EINVAL;
++	}
++
++	/* Check that only command bytes listed in the mask are non-zero */
++	fsg->cmnd[1] &= 0x1f;			// Mask away the LUN
++	for (i = 1; i < cmnd_size; ++i) {
++		if (fsg->cmnd[i] && !(mask & (1 << i))) {
++			if (curlun)
++				curlun->sense_data = SS_INVALID_FIELD_IN_CDB;
++			return -EINVAL;
++		}
++	}
++
++	/* If the medium isn't mounted and the command needs to access
++	 * it, return an error. */
++	if (curlun && !fsg_lun_is_open(curlun) && needs_medium) {
++		curlun->sense_data = SS_MEDIUM_NOT_PRESENT;
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/* wrapper of check_command for data size in blocks handling */
++static int check_command_size_in_blocks(struct fsg_dev *fsg, int cmnd_size,
++		enum data_direction data_dir, unsigned int mask,
++		int needs_medium, const char *name)
++{
++	if (fsg->curlun)
++		fsg->data_size_from_cmnd <<= fsg->curlun->blkbits;
++	return check_command(fsg, cmnd_size, data_dir,
++			mask, needs_medium, name);
++}
++
++static int do_scsi_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc;
++	int			reply = -EINVAL;
++	int			i;
++	static char		unknown[16];
++
++	dump_cdb(fsg);
++
++	/* Wait for the next buffer to become available for data or status */
++	bh = fsg->next_buffhd_to_drain = fsg->next_buffhd_to_fill;
++	while (bh->state != BUF_STATE_EMPTY) {
++		rc = sleep_thread(fsg);
++		if (rc)
++			return rc;
++	}
++	fsg->phase_error = 0;
++	fsg->short_packet_received = 0;
++
++	down_read(&fsg->filesem);	// We're using the backing file
++	switch (fsg->cmnd[0]) {
++
++	case INQUIRY:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"INQUIRY")) == 0)
++			reply = do_inquiry(fsg, bh);
++		break;
++
++	case MODE_SELECT:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_FROM_HOST,
++				(1<<1) | (1<<4), 0,
++				"MODE SELECT(6)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SELECT_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_FROM_HOST,
++				(1<<1) | (3<<7), 0,
++				"MODE SELECT(10)")) == 0)
++			reply = do_mode_select(fsg, bh);
++		break;
++
++	case MODE_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (1<<4), 0,
++				"MODE SENSE(6)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case MODE_SENSE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(1<<1) | (1<<2) | (3<<7), 0,
++				"MODE SENSE(10)")) == 0)
++			reply = do_mode_sense(fsg, bh);
++		break;
++
++	case ALLOW_MEDIUM_REMOVAL:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<4), 0,
++				"PREVENT-ALLOW MEDIUM REMOVAL")) == 0)
++			reply = do_prevent_allow(fsg);
++		break;
++
++	case READ_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_TO_HOST,
++				(7<<1) | (1<<4), 1,
++				"READ(6)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"READ(10)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_TO_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"READ(12)")) == 0)
++			reply = do_read(fsg);
++		break;
++
++	case READ_CAPACITY:
++		fsg->data_size_from_cmnd = 8;
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(0xf<<2) | (1<<8), 1,
++				"READ CAPACITY")) == 0)
++			reply = do_read_capacity(fsg, bh);
++		break;
++
++	case READ_HEADER:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7) | (0x1f<<1), 1,
++				"READ HEADER")) == 0)
++			reply = do_read_header(fsg, bh);
++		break;
++
++	case READ_TOC:
++		if (!mod_data.cdrom)
++			goto unknown_cmnd;
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(7<<6) | (1<<1), 1,
++				"READ TOC")) == 0)
++			reply = do_read_toc(fsg, bh);
++		break;
++
++	case READ_FORMAT_CAPACITIES:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command(fsg, 10, DATA_DIR_TO_HOST,
++				(3<<7), 1,
++				"READ FORMAT CAPACITIES")) == 0)
++			reply = do_read_format_capacities(fsg, bh);
++		break;
++
++	case REQUEST_SENSE:
++		fsg->data_size_from_cmnd = fsg->cmnd[4];
++		if ((reply = check_command(fsg, 6, DATA_DIR_TO_HOST,
++				(1<<4), 0,
++				"REQUEST SENSE")) == 0)
++			reply = do_request_sense(fsg, bh);
++		break;
++
++	case START_STOP:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 6, DATA_DIR_NONE,
++				(1<<1) | (1<<4), 0,
++				"START-STOP UNIT")) == 0)
++			reply = do_start_stop(fsg);
++		break;
++
++	case SYNCHRONIZE_CACHE:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(0xf<<2) | (3<<7), 1,
++				"SYNCHRONIZE CACHE")) == 0)
++			reply = do_synchronize_cache(fsg);
++		break;
++
++	case TEST_UNIT_READY:
++		fsg->data_size_from_cmnd = 0;
++		reply = check_command(fsg, 6, DATA_DIR_NONE,
++				0, 1,
++				"TEST UNIT READY");
++		break;
++
++	/* Although optional, this command is used by MS-Windows.  We
++	 * support a minimal version: BytChk must be 0. */
++	case VERIFY:
++		fsg->data_size_from_cmnd = 0;
++		if ((reply = check_command(fsg, 10, DATA_DIR_NONE,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"VERIFY")) == 0)
++			reply = do_verify(fsg);
++		break;
++
++	case WRITE_6:
++		i = fsg->cmnd[4];
++		fsg->data_size_from_cmnd = (i == 0) ? 256 : i;
++		if ((reply = check_command_size_in_blocks(fsg, 6,
++				DATA_DIR_FROM_HOST,
++				(7<<1) | (1<<4), 1,
++				"WRITE(6)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_10:
++		fsg->data_size_from_cmnd = get_unaligned_be16(&fsg->cmnd[7]);
++		if ((reply = check_command_size_in_blocks(fsg, 10,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (3<<7), 1,
++				"WRITE(10)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	case WRITE_12:
++		fsg->data_size_from_cmnd = get_unaligned_be32(&fsg->cmnd[6]);
++		if ((reply = check_command_size_in_blocks(fsg, 12,
++				DATA_DIR_FROM_HOST,
++				(1<<1) | (0xf<<2) | (0xf<<6), 1,
++				"WRITE(12)")) == 0)
++			reply = do_write(fsg);
++		break;
++
++	/* Some mandatory commands that we recognize but don't implement.
++	 * They don't mean much in this setting.  It's left as an exercise
++	 * for anyone interested to implement RESERVE and RELEASE in terms
++	 * of Posix locks. */
++	case FORMAT_UNIT:
++	case RELEASE:
++	case RESERVE:
++	case SEND_DIAGNOSTIC:
++		// Fall through
++
++	default:
++ unknown_cmnd:
++		fsg->data_size_from_cmnd = 0;
++		sprintf(unknown, "Unknown x%02x", fsg->cmnd[0]);
++		if ((reply = check_command(fsg, fsg->cmnd_size,
++				DATA_DIR_UNKNOWN, ~0, 0, unknown)) == 0) {
++			fsg->curlun->sense_data = SS_INVALID_COMMAND;
++			reply = -EINVAL;
++		}
++		break;
++	}
++	up_read(&fsg->filesem);
++
++	if (reply == -EINTR || signal_pending(current))
++		return -EINTR;
++
++	/* Set up the single reply buffer for finish_reply() */
++	if (reply == -EINVAL)
++		reply = 0;		// Error reply length
++	if (reply >= 0 && fsg->data_dir == DATA_DIR_TO_HOST) {
++		reply = min((u32) reply, fsg->data_size_from_cmnd);
++		bh->inreq->length = reply;
++		bh->state = BUF_STATE_FULL;
++		fsg->residue -= reply;
++	}				// Otherwise it's already set
++
++	return 0;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int received_cbw(struct fsg_dev *fsg, struct fsg_buffhd *bh)
++{
++	struct usb_request		*req = bh->outreq;
++	struct bulk_cb_wrap	*cbw = req->buf;
++
++	/* Was this a real packet?  Should it be ignored? */
++	if (req->status || test_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++		return -EINVAL;
++
++	/* Is the CBW valid? */
++	if (req->actual != US_BULK_CB_WRAP_LEN ||
++			cbw->Signature != cpu_to_le32(
++				US_BULK_CB_SIGN)) {
++		DBG(fsg, "invalid CBW: len %u sig 0x%x\n",
++				req->actual,
++				le32_to_cpu(cbw->Signature));
++
++		/* The Bulk-only spec says we MUST stall the IN endpoint
++		 * (6.6.1), so it's unavoidable.  It also says we must
++		 * retain this state until the next reset, but there's
++		 * no way to tell the controller driver it should ignore
++		 * Clear-Feature(HALT) requests.
++		 *
++		 * We aren't required to halt the OUT endpoint; instead
++		 * we can simply accept and discard any data received
++		 * until the next reset. */
++		wedge_bulk_in_endpoint(fsg);
++		set_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++		return -EINVAL;
++	}
++
++	/* Is the CBW meaningful? */
++	if (cbw->Lun >= FSG_MAX_LUNS || cbw->Flags & ~US_BULK_FLAG_IN ||
++			cbw->Length <= 0 || cbw->Length > MAX_COMMAND_SIZE) {
++		DBG(fsg, "non-meaningful CBW: lun = %u, flags = 0x%x, "
++				"cmdlen %u\n",
++				cbw->Lun, cbw->Flags, cbw->Length);
++
++		/* We can do anything we want here, so let's stall the
++		 * bulk pipes if we are allowed to. */
++		if (mod_data.can_stall) {
++			fsg_set_halt(fsg, fsg->bulk_out);
++			halt_bulk_in_endpoint(fsg);
++		}
++		return -EINVAL;
++	}
++
++	/* Save the command for later */
++	fsg->cmnd_size = cbw->Length;
++	memcpy(fsg->cmnd, cbw->CDB, fsg->cmnd_size);
++	if (cbw->Flags & US_BULK_FLAG_IN)
++		fsg->data_dir = DATA_DIR_TO_HOST;
++	else
++		fsg->data_dir = DATA_DIR_FROM_HOST;
++	fsg->data_size = le32_to_cpu(cbw->DataTransferLength);
++	if (fsg->data_size == 0)
++		fsg->data_dir = DATA_DIR_NONE;
++	fsg->lun = cbw->Lun;
++	fsg->tag = cbw->Tag;
++	return 0;
++}
++
++
++static int get_next_command(struct fsg_dev *fsg)
++{
++	struct fsg_buffhd	*bh;
++	int			rc = 0;
++
++	if (transport_is_bbb()) {
++
++		/* Wait for the next buffer to become available */
++		bh = fsg->next_buffhd_to_fill;
++		while (bh->state != BUF_STATE_EMPTY) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Queue a request to read a Bulk-only CBW */
++		set_bulk_out_req_length(fsg, bh, US_BULK_CB_WRAP_LEN);
++		start_transfer(fsg, fsg->bulk_out, bh->outreq,
++				&bh->outreq_busy, &bh->state);
++
++		/* We will drain the buffer in software, which means we
++		 * can reuse it for the next filling.  No need to advance
++		 * next_buffhd_to_fill. */
++
++		/* Wait for the CBW to arrive */
++		while (bh->state != BUF_STATE_FULL) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++		smp_rmb();
++		rc = received_cbw(fsg, bh);
++		bh->state = BUF_STATE_EMPTY;
++
++	} else {		// USB_PR_CB or USB_PR_CBI
++
++		/* Wait for the next command to arrive */
++		while (fsg->cbbuf_cmnd_size == 0) {
++			rc = sleep_thread(fsg);
++			if (rc)
++				return rc;
++		}
++
++		/* Is the previous status interrupt request still busy?
++		 * The host is allowed to skip reading the status,
++		 * so we must cancel it. */
++		if (fsg->intreq_busy)
++			usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++
++		/* Copy the command and mark the buffer empty */
++		fsg->data_dir = DATA_DIR_UNKNOWN;
++		spin_lock_irq(&fsg->lock);
++		fsg->cmnd_size = fsg->cbbuf_cmnd_size;
++		memcpy(fsg->cmnd, fsg->cbbuf_cmnd, fsg->cmnd_size);
++		fsg->cbbuf_cmnd_size = 0;
++		spin_unlock_irq(&fsg->lock);
++
++		/* Use LUN from the command */
++		fsg->lun = fsg->cmnd[1] >> 5;
++	}
++
++	/* Update current lun */
++	if (fsg->lun >= 0 && fsg->lun < fsg->nluns)
++		fsg->curlun = &fsg->luns[fsg->lun];
++	else
++		fsg->curlun = NULL;
++
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int enable_endpoint(struct fsg_dev *fsg, struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *d)
++{
++	int	rc;
++
++	ep->driver_data = fsg;
++	ep->desc = d;
++	rc = usb_ep_enable(ep);
++	if (rc)
++		ERROR(fsg, "can't enable %s, result %d\n", ep->name, rc);
++	return rc;
++}
++
++static int alloc_request(struct fsg_dev *fsg, struct usb_ep *ep,
++		struct usb_request **preq)
++{
++	*preq = usb_ep_alloc_request(ep, GFP_ATOMIC);
++	if (*preq)
++		return 0;
++	ERROR(fsg, "can't allocate request for %s\n", ep->name);
++	return -ENOMEM;
++}
++
++/*
++ * Reset interface setting and re-init endpoint state (toggle etc).
++ * Call with altsetting < 0 to disable the interface.  The only other
++ * available altsetting is 0, which enables the interface.
++ */
++static int do_set_interface(struct fsg_dev *fsg, int altsetting)
++{
++	int	rc = 0;
++	int	i;
++	const struct usb_endpoint_descriptor	*d;
++
++	if (fsg->running)
++		DBG(fsg, "reset interface\n");
++
++reset:
++	/* Deallocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd *bh = &fsg->buffhds[i];
++
++		if (bh->inreq) {
++			usb_ep_free_request(fsg->bulk_in, bh->inreq);
++			bh->inreq = NULL;
++		}
++		if (bh->outreq) {
++			usb_ep_free_request(fsg->bulk_out, bh->outreq);
++			bh->outreq = NULL;
++		}
++	}
++	if (fsg->intreq) {
++		usb_ep_free_request(fsg->intr_in, fsg->intreq);
++		fsg->intreq = NULL;
++	}
++
++	/* Disable the endpoints */
++	if (fsg->bulk_in_enabled) {
++		usb_ep_disable(fsg->bulk_in);
++		fsg->bulk_in_enabled = 0;
++	}
++	if (fsg->bulk_out_enabled) {
++		usb_ep_disable(fsg->bulk_out);
++		fsg->bulk_out_enabled = 0;
++	}
++	if (fsg->intr_in_enabled) {
++		usb_ep_disable(fsg->intr_in);
++		fsg->intr_in_enabled = 0;
++	}
++
++	fsg->running = 0;
++	if (altsetting < 0 || rc != 0)
++		return rc;
++
++	DBG(fsg, "set interface %d\n", altsetting);
++
++	/* Enable the endpoints */
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_in_desc, &fsg_hs_bulk_in_desc,
++			&fsg_ss_bulk_in_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_in, d)) != 0)
++		goto reset;
++	fsg->bulk_in_enabled = 1;
++
++	d = fsg_ep_desc(fsg->gadget,
++			&fsg_fs_bulk_out_desc, &fsg_hs_bulk_out_desc,
++			&fsg_ss_bulk_out_desc);
++	if ((rc = enable_endpoint(fsg, fsg->bulk_out, d)) != 0)
++		goto reset;
++	fsg->bulk_out_enabled = 1;
++	fsg->bulk_out_maxpacket = usb_endpoint_maxp(d);
++	clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags);
++
++	if (transport_is_cbi()) {
++		d = fsg_ep_desc(fsg->gadget,
++				&fsg_fs_intr_in_desc, &fsg_hs_intr_in_desc,
++				&fsg_ss_intr_in_desc);
++		if ((rc = enable_endpoint(fsg, fsg->intr_in, d)) != 0)
++			goto reset;
++		fsg->intr_in_enabled = 1;
++	}
++
++	/* Allocate the requests */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		if ((rc = alloc_request(fsg, fsg->bulk_in, &bh->inreq)) != 0)
++			goto reset;
++		if ((rc = alloc_request(fsg, fsg->bulk_out, &bh->outreq)) != 0)
++			goto reset;
++		bh->inreq->buf = bh->outreq->buf = bh->buf;
++		bh->inreq->context = bh->outreq->context = bh;
++		bh->inreq->complete = bulk_in_complete;
++		bh->outreq->complete = bulk_out_complete;
++	}
++	if (transport_is_cbi()) {
++		if ((rc = alloc_request(fsg, fsg->intr_in, &fsg->intreq)) != 0)
++			goto reset;
++		fsg->intreq->complete = intr_in_complete;
++	}
++
++	fsg->running = 1;
++	for (i = 0; i < fsg->nluns; ++i)
++		fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++	return rc;
++}
++
++
++/*
++ * Change our operational configuration.  This code must agree with the code
++ * that returns config descriptors, and with interface altsetting code.
++ *
++ * It's also responsible for power management interactions.  Some
++ * configurations might not work with our current power sources.
++ * For now we just assume the gadget is always self-powered.
++ */
++static int do_set_config(struct fsg_dev *fsg, u8 new_config)
++{
++	int	rc = 0;
++
++	/* Disable the single interface */
++	if (fsg->config != 0) {
++		DBG(fsg, "reset config\n");
++		fsg->config = 0;
++		rc = do_set_interface(fsg, -1);
++	}
++
++	/* Enable the interface */
++	if (new_config != 0) {
++		fsg->config = new_config;
++		if ((rc = do_set_interface(fsg, 0)) != 0)
++			fsg->config = 0;	// Reset on errors
++		else
++			INFO(fsg, "%s config #%d\n",
++			     usb_speed_string(fsg->gadget->speed),
++			     fsg->config);
++	}
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void handle_exception(struct fsg_dev *fsg)
++{
++	siginfo_t		info;
++	int			sig;
++	int			i;
++	int			num_active;
++	struct fsg_buffhd	*bh;
++	enum fsg_state		old_state;
++	u8			new_config;
++	struct fsg_lun		*curlun;
++	unsigned int		exception_req_tag;
++	int			rc;
++
++	/* Clear the existing signals.  Anything but SIGUSR1 is converted
++	 * into a high-priority EXIT exception. */
++	for (;;) {
++		sig = dequeue_signal_lock(current, &current->blocked, &info);
++		if (!sig)
++			break;
++		if (sig != SIGUSR1) {
++			if (fsg->state < FSG_STATE_EXIT)
++				DBG(fsg, "Main thread exiting on signal\n");
++			raise_exception(fsg, FSG_STATE_EXIT);
++		}
++	}
++
++	/* Cancel all the pending transfers */
++	if (fsg->intreq_busy)
++		usb_ep_dequeue(fsg->intr_in, fsg->intreq);
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		if (bh->inreq_busy)
++			usb_ep_dequeue(fsg->bulk_in, bh->inreq);
++		if (bh->outreq_busy)
++			usb_ep_dequeue(fsg->bulk_out, bh->outreq);
++	}
++
++	/* Wait until everything is idle */
++	for (;;) {
++		num_active = fsg->intreq_busy;
++		for (i = 0; i < fsg_num_buffers; ++i) {
++			bh = &fsg->buffhds[i];
++			num_active += bh->inreq_busy + bh->outreq_busy;
++		}
++		if (num_active == 0)
++			break;
++		if (sleep_thread(fsg))
++			return;
++	}
++
++	/* Clear out the controller's fifos */
++	if (fsg->bulk_in_enabled)
++		usb_ep_fifo_flush(fsg->bulk_in);
++	if (fsg->bulk_out_enabled)
++		usb_ep_fifo_flush(fsg->bulk_out);
++	if (fsg->intr_in_enabled)
++		usb_ep_fifo_flush(fsg->intr_in);
++
++	/* Reset the I/O buffer states and pointers, the SCSI
++	 * state, and the exception.  Then invoke the handler. */
++	spin_lock_irq(&fsg->lock);
++
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		bh = &fsg->buffhds[i];
++		bh->state = BUF_STATE_EMPTY;
++	}
++	fsg->next_buffhd_to_fill = fsg->next_buffhd_to_drain =
++			&fsg->buffhds[0];
++
++	exception_req_tag = fsg->exception_req_tag;
++	new_config = fsg->new_config;
++	old_state = fsg->state;
++
++	if (old_state == FSG_STATE_ABORT_BULK_OUT)
++		fsg->state = FSG_STATE_STATUS_PHASE;
++	else {
++		for (i = 0; i < fsg->nluns; ++i) {
++			curlun = &fsg->luns[i];
++			curlun->prevent_medium_removal = 0;
++			curlun->sense_data = curlun->unit_attention_data =
++					SS_NO_SENSE;
++			curlun->sense_data_info = 0;
++			curlun->info_valid = 0;
++		}
++		fsg->state = FSG_STATE_IDLE;
++	}
++	spin_unlock_irq(&fsg->lock);
++
++	/* Carry out any extra actions required for the exception */
++	switch (old_state) {
++	default:
++		break;
++
++	case FSG_STATE_ABORT_BULK_OUT:
++		send_status(fsg);
++		spin_lock_irq(&fsg->lock);
++		if (fsg->state == FSG_STATE_STATUS_PHASE)
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		break;
++
++	case FSG_STATE_RESET:
++		/* In case we were forced against our will to halt a
++		 * bulk endpoint, clear the halt now.  (The SuperH UDC
++		 * requires this.) */
++		if (test_and_clear_bit(IGNORE_BULK_OUT, &fsg->atomic_bitflags))
++			usb_ep_clear_halt(fsg->bulk_in);
++
++		if (transport_is_bbb()) {
++			if (fsg->ep0_req_tag == exception_req_tag)
++				ep0_queue(fsg);	// Complete the status stage
++
++		} else if (transport_is_cbi())
++			send_status(fsg);	// Status by interrupt pipe
++
++		/* Technically this should go here, but it would only be
++		 * a waste of time.  Ditto for the INTERFACE_CHANGE and
++		 * CONFIG_CHANGE cases. */
++		// for (i = 0; i < fsg->nluns; ++i)
++		//	fsg->luns[i].unit_attention_data = SS_RESET_OCCURRED;
++		break;
++
++	case FSG_STATE_INTERFACE_CHANGE:
++		rc = do_set_interface(fsg, 0);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_CONFIG_CHANGE:
++		rc = do_set_config(fsg, new_config);
++		if (fsg->ep0_req_tag != exception_req_tag)
++			break;
++		if (rc != 0)			// STALL on errors
++			fsg_set_halt(fsg, fsg->ep0);
++		else				// Complete the status stage
++			ep0_queue(fsg);
++		break;
++
++	case FSG_STATE_DISCONNECT:
++		for (i = 0; i < fsg->nluns; ++i)
++			fsg_lun_fsync_sub(fsg->luns + i);
++		do_set_config(fsg, 0);		// Unconfigured state
++		break;
++
++	case FSG_STATE_EXIT:
++	case FSG_STATE_TERMINATED:
++		do_set_config(fsg, 0);			// Free resources
++		spin_lock_irq(&fsg->lock);
++		fsg->state = FSG_STATE_TERMINATED;	// Stop the thread
++		spin_unlock_irq(&fsg->lock);
++		break;
++	}
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static int fsg_main_thread(void *fsg_)
++{
++	struct fsg_dev		*fsg = fsg_;
++
++	/* Allow the thread to be killed by a signal, but set the signal mask
++	 * to block everything but INT, TERM, KILL, and USR1. */
++	allow_signal(SIGINT);
++	allow_signal(SIGTERM);
++	allow_signal(SIGKILL);
++	allow_signal(SIGUSR1);
++
++	/* Allow the thread to be frozen */
++	set_freezable();
++
++	/* Arrange for userspace references to be interpreted as kernel
++	 * pointers.  That way we can pass a kernel pointer to a routine
++	 * that expects a __user pointer and it will work okay. */
++	set_fs(get_ds());
++
++	/* The main loop */
++	while (fsg->state != FSG_STATE_TERMINATED) {
++		if (exception_in_progress(fsg) || signal_pending(current)) {
++			handle_exception(fsg);
++			continue;
++		}
++
++		if (!fsg->running) {
++			sleep_thread(fsg);
++			continue;
++		}
++
++		if (get_next_command(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_DATA_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (do_scsi_command(fsg) || finish_reply(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_STATUS_PHASE;
++		spin_unlock_irq(&fsg->lock);
++
++		if (send_status(fsg))
++			continue;
++
++		spin_lock_irq(&fsg->lock);
++		if (!exception_in_progress(fsg))
++			fsg->state = FSG_STATE_IDLE;
++		spin_unlock_irq(&fsg->lock);
++		}
++
++	spin_lock_irq(&fsg->lock);
++	fsg->thread_task = NULL;
++	spin_unlock_irq(&fsg->lock);
++
++	/* If we are exiting because of a signal, unregister the
++	 * gadget driver. */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Let the unbind and cleanup routines know the thread has exited */
++	complete_and_exit(&fsg->thread_notifier, 0);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++
++/* The write permissions and store_xxx pointers are set in fsg_bind() */
++static DEVICE_ATTR(ro, 0444, fsg_show_ro, NULL);
++static DEVICE_ATTR(nofua, 0644, fsg_show_nofua, NULL);
++static DEVICE_ATTR(file, 0444, fsg_show_file, NULL);
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_release(struct kref *ref)
++{
++	struct fsg_dev	*fsg = container_of(ref, struct fsg_dev, ref);
++
++	kfree(fsg->luns);
++	kfree(fsg);
++}
++
++static void lun_release(struct device *dev)
++{
++	struct rw_semaphore	*filesem = dev_get_drvdata(dev);
++	struct fsg_dev		*fsg =
++		container_of(filesem, struct fsg_dev, filesem);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++
++static void /* __init_or_exit */ fsg_unbind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_request	*req = fsg->ep0req;
++
++	DBG(fsg, "unbind\n");
++	clear_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* If the thread isn't already dead, tell it to exit now */
++	if (fsg->state != FSG_STATE_TERMINATED) {
++		raise_exception(fsg, FSG_STATE_EXIT);
++		wait_for_completion(&fsg->thread_notifier);
++
++		/* The cleanup routine waits for this completion also */
++		complete(&fsg->thread_notifier);
++	}
++
++	/* Unregister the sysfs attribute files and the LUNs */
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (curlun->registered) {
++			device_remove_file(&curlun->dev, &dev_attr_nofua);
++			device_remove_file(&curlun->dev, &dev_attr_ro);
++			device_remove_file(&curlun->dev, &dev_attr_file);
++			fsg_lun_close(curlun);
++			device_unregister(&curlun->dev);
++			curlun->registered = 0;
++		}
++	}
++
++	/* Free the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i)
++		kfree(fsg->buffhds[i].buf);
++
++	/* Free the request and buffer for endpoint 0 */
++	if (req) {
++		kfree(req->buf);
++		usb_ep_free_request(fsg->ep0, req);
++	}
++
++	set_gadget_data(gadget, NULL);
++}
++
++
++static int __init check_parameters(struct fsg_dev *fsg)
++{
++	int	prot;
++	int	gcnum;
++
++	/* Store the default values */
++	mod_data.transport_type = USB_PR_BULK;
++	mod_data.transport_name = "Bulk-only";
++	mod_data.protocol_type = USB_SC_SCSI;
++	mod_data.protocol_name = "Transparent SCSI";
++
++	/* Some peripheral controllers are known not to be able to
++	 * halt bulk endpoints correctly.  If one of them is present,
++	 * disable stalls.
++	 */
++	if (gadget_is_at91(fsg->gadget))
++		mod_data.can_stall = 0;
++
++	if (mod_data.release == 0xffff) {	// Parameter wasn't set
++		gcnum = usb_gadget_controller_number(fsg->gadget);
++		if (gcnum >= 0)
++			mod_data.release = 0x0300 + gcnum;
++		else {
++			WARNING(fsg, "controller '%s' not recognized\n",
++				fsg->gadget->name);
++			mod_data.release = 0x0399;
++		}
++	}
++
++	prot = simple_strtol(mod_data.protocol_parm, NULL, 0);
++
++#ifdef CONFIG_USB_FILE_STORAGE_TEST
++	if (strnicmp(mod_data.transport_parm, "BBB", 10) == 0) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.transport_parm, "CB", 10) == 0) {
++		mod_data.transport_type = USB_PR_CB;
++		mod_data.transport_name = "Control-Bulk";
++	} else if (strnicmp(mod_data.transport_parm, "CBI", 10) == 0) {
++		mod_data.transport_type = USB_PR_CBI;
++		mod_data.transport_name = "Control-Bulk-Interrupt";
++	} else {
++		ERROR(fsg, "invalid transport: %s\n", mod_data.transport_parm);
++		return -EINVAL;
++	}
++
++	if (strnicmp(mod_data.protocol_parm, "SCSI", 10) == 0 ||
++			prot == USB_SC_SCSI) {
++		;		// Use default setting
++	} else if (strnicmp(mod_data.protocol_parm, "RBC", 10) == 0 ||
++			prot == USB_SC_RBC) {
++		mod_data.protocol_type = USB_SC_RBC;
++		mod_data.protocol_name = "RBC";
++	} else if (strnicmp(mod_data.protocol_parm, "8020", 4) == 0 ||
++			strnicmp(mod_data.protocol_parm, "ATAPI", 10) == 0 ||
++			prot == USB_SC_8020) {
++		mod_data.protocol_type = USB_SC_8020;
++		mod_data.protocol_name = "8020i (ATAPI)";
++	} else if (strnicmp(mod_data.protocol_parm, "QIC", 3) == 0 ||
++			prot == USB_SC_QIC) {
++		mod_data.protocol_type = USB_SC_QIC;
++		mod_data.protocol_name = "QIC-157";
++	} else if (strnicmp(mod_data.protocol_parm, "UFI", 10) == 0 ||
++			prot == USB_SC_UFI) {
++		mod_data.protocol_type = USB_SC_UFI;
++		mod_data.protocol_name = "UFI";
++	} else if (strnicmp(mod_data.protocol_parm, "8070", 4) == 0 ||
++			prot == USB_SC_8070) {
++		mod_data.protocol_type = USB_SC_8070;
++		mod_data.protocol_name = "8070i";
++	} else {
++		ERROR(fsg, "invalid protocol: %s\n", mod_data.protocol_parm);
++		return -EINVAL;
++	}
++
++	mod_data.buflen &= PAGE_CACHE_MASK;
++	if (mod_data.buflen <= 0) {
++		ERROR(fsg, "invalid buflen\n");
++		return -ETOOSMALL;
++	}
++
++#endif /* CONFIG_USB_FILE_STORAGE_TEST */
++
++	/* Serial string handling.
++	 * On a real device, the serial string would be loaded
++	 * from permanent storage. */
++	if (mod_data.serial) {
++		const char *ch;
++		unsigned len = 0;
++
++		/* Sanity check :
++		 * The CB[I] specification limits the serial string to
++		 * 12 uppercase hexadecimal characters.
++		 * BBB need at least 12 uppercase hexadecimal characters,
++		 * with a maximum of 126. */
++		for (ch = mod_data.serial; *ch; ++ch) {
++			++len;
++			if ((*ch < '0' || *ch > '9') &&
++			    (*ch < 'A' || *ch > 'F')) { /* not uppercase hex */
++				WARNING(fsg,
++					"Invalid serial string character: %c\n",
++					*ch);
++				goto no_serial;
++			}
++		}
++		if (len > 126 ||
++		    (mod_data.transport_type == USB_PR_BULK && len < 12) ||
++		    (mod_data.transport_type != USB_PR_BULK && len > 12)) {
++			WARNING(fsg, "Invalid serial string length!\n");
++			goto no_serial;
++		}
++		fsg_strings[FSG_STRING_SERIAL - 1].s = mod_data.serial;
++	} else {
++		WARNING(fsg, "No serial-number string provided!\n");
++ no_serial:
++		device_desc.iSerialNumber = 0;
++	}
++
++	return 0;
++}
++
++
++static int __init fsg_bind(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = the_fsg;
++	int			rc;
++	int			i;
++	struct fsg_lun		*curlun;
++	struct usb_ep		*ep;
++	struct usb_request	*req;
++	char			*pathbuf, *p;
++
++	fsg->gadget = gadget;
++	set_gadget_data(gadget, fsg);
++	fsg->ep0 = gadget->ep0;
++	fsg->ep0->driver_data = fsg;
++
++	if ((rc = check_parameters(fsg)) != 0)
++		goto out;
++
++	if (mod_data.removable) {	// Enable the store_xxx attributes
++		dev_attr_file.attr.mode = 0644;
++		dev_attr_file.store = fsg_store_file;
++		if (!mod_data.cdrom) {
++			dev_attr_ro.attr.mode = 0644;
++			dev_attr_ro.store = fsg_store_ro;
++		}
++	}
++
++	/* Only for removable media? */
++	dev_attr_nofua.attr.mode = 0644;
++	dev_attr_nofua.store = fsg_store_nofua;
++
++	/* Find out how many LUNs there should be */
++	i = mod_data.nluns;
++	if (i == 0)
++		i = max(mod_data.num_filenames, 1u);
++	if (i > FSG_MAX_LUNS) {
++		ERROR(fsg, "invalid number of LUNs: %d\n", i);
++		rc = -EINVAL;
++		goto out;
++	}
++
++	/* Create the LUNs, open their backing files, and register the
++	 * LUN devices in sysfs. */
++	fsg->luns = kzalloc(i * sizeof(struct fsg_lun), GFP_KERNEL);
++	if (!fsg->luns) {
++		rc = -ENOMEM;
++		goto out;
++	}
++	fsg->nluns = i;
++
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		curlun->cdrom = !!mod_data.cdrom;
++		curlun->ro = mod_data.cdrom || mod_data.ro[i];
++		curlun->initially_ro = curlun->ro;
++		curlun->removable = mod_data.removable;
++		curlun->nofua = mod_data.nofua[i];
++		curlun->dev.release = lun_release;
++		curlun->dev.parent = &gadget->dev;
++		curlun->dev.driver = &fsg_driver.driver;
++		dev_set_drvdata(&curlun->dev, &fsg->filesem);
++		dev_set_name(&curlun->dev,"%s-lun%d",
++			     dev_name(&gadget->dev), i);
++
++		kref_get(&fsg->ref);
++		rc = device_register(&curlun->dev);
++		if (rc) {
++			INFO(fsg, "failed to register LUN%d: %d\n", i, rc);
++			put_device(&curlun->dev);
++			goto out;
++		}
++		curlun->registered = 1;
++
++		rc = device_create_file(&curlun->dev, &dev_attr_ro);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_nofua);
++		if (rc)
++			goto out;
++		rc = device_create_file(&curlun->dev, &dev_attr_file);
++		if (rc)
++			goto out;
++
++		if (mod_data.file[i] && *mod_data.file[i]) {
++			rc = fsg_lun_open(curlun, mod_data.file[i]);
++			if (rc)
++				goto out;
++		} else if (!mod_data.removable) {
++			ERROR(fsg, "no file given for LUN%d\n", i);
++			rc = -EINVAL;
++			goto out;
++		}
++	}
++
++	/* Find all the endpoints we will use */
++	usb_ep_autoconfig_reset(gadget);
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_in_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_in = ep;
++
++	ep = usb_ep_autoconfig(gadget, &fsg_fs_bulk_out_desc);
++	if (!ep)
++		goto autoconf_fail;
++	ep->driver_data = fsg;		// claim the endpoint
++	fsg->bulk_out = ep;
++
++	if (transport_is_cbi()) {
++		ep = usb_ep_autoconfig(gadget, &fsg_fs_intr_in_desc);
++		if (!ep)
++			goto autoconf_fail;
++		ep->driver_data = fsg;		// claim the endpoint
++		fsg->intr_in = ep;
++	}
++
++	/* Fix up the descriptors */
++	device_desc.idVendor = cpu_to_le16(mod_data.vendor);
++	device_desc.idProduct = cpu_to_le16(mod_data.product);
++	device_desc.bcdDevice = cpu_to_le16(mod_data.release);
++
++	i = (transport_is_cbi() ? 3 : 2);	// Number of endpoints
++	fsg_intf_desc.bNumEndpoints = i;
++	fsg_intf_desc.bInterfaceSubClass = mod_data.protocol_type;
++	fsg_intf_desc.bInterfaceProtocol = mod_data.transport_type;
++	fsg_fs_function[i + FSG_FS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++	if (gadget_is_dualspeed(gadget)) {
++		fsg_hs_function[i + FSG_HS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_hs_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_hs_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_hs_intr_in_desc.bEndpointAddress =
++			fsg_fs_intr_in_desc.bEndpointAddress;
++	}
++
++	if (gadget_is_superspeed(gadget)) {
++		unsigned		max_burst;
++
++		fsg_ss_function[i + FSG_SS_FUNCTION_PRE_EP_ENTRIES] = NULL;
++
++		/* Calculate bMaxBurst, we know packet size is 1024 */
++		max_burst = min_t(unsigned, mod_data.buflen / 1024, 15);
++
++		/* Assume endpoint addresses are the same for both speeds */
++		fsg_ss_bulk_in_desc.bEndpointAddress =
++			fsg_fs_bulk_in_desc.bEndpointAddress;
++		fsg_ss_bulk_in_comp_desc.bMaxBurst = max_burst;
++
++		fsg_ss_bulk_out_desc.bEndpointAddress =
++			fsg_fs_bulk_out_desc.bEndpointAddress;
++		fsg_ss_bulk_out_comp_desc.bMaxBurst = max_burst;
++	}
++
++	if (gadget_is_otg(gadget))
++		fsg_otg_desc.bmAttributes |= USB_OTG_HNP;
++
++	rc = -ENOMEM;
++
++	/* Allocate the request and buffer for endpoint 0 */
++	fsg->ep0req = req = usb_ep_alloc_request(fsg->ep0, GFP_KERNEL);
++	if (!req)
++		goto out;
++	req->buf = kmalloc(EP0_BUFSIZE, GFP_KERNEL);
++	if (!req->buf)
++		goto out;
++	req->complete = ep0_complete;
++
++	/* Allocate the data buffers */
++	for (i = 0; i < fsg_num_buffers; ++i) {
++		struct fsg_buffhd	*bh = &fsg->buffhds[i];
++
++		/* Allocate for the bulk-in endpoint.  We assume that
++		 * the buffer will also work with the bulk-out (and
++		 * interrupt-in) endpoint. */
++		bh->buf = kmalloc(mod_data.buflen, GFP_KERNEL);
++		if (!bh->buf)
++			goto out;
++		bh->next = bh + 1;
++	}
++	fsg->buffhds[fsg_num_buffers - 1].next = &fsg->buffhds[0];
++
++	/* This should reflect the actual gadget power source */
++	usb_gadget_set_selfpowered(gadget);
++
++	snprintf(fsg_string_manufacturer, sizeof fsg_string_manufacturer,
++			"%s %s with %s",
++			init_utsname()->sysname, init_utsname()->release,
++			gadget->name);
++
++	fsg->thread_task = kthread_create(fsg_main_thread, fsg,
++			"file-storage-gadget");
++	if (IS_ERR(fsg->thread_task)) {
++		rc = PTR_ERR(fsg->thread_task);
++		goto out;
++	}
++
++	INFO(fsg, DRIVER_DESC ", version: " DRIVER_VERSION "\n");
++	INFO(fsg, "NOTE: This driver is deprecated.  "
++			"Consider using g_mass_storage instead.\n");
++	INFO(fsg, "Number of LUNs=%d\n", fsg->nluns);
++
++	pathbuf = kmalloc(PATH_MAX, GFP_KERNEL);
++	for (i = 0; i < fsg->nluns; ++i) {
++		curlun = &fsg->luns[i];
++		if (fsg_lun_is_open(curlun)) {
++			p = NULL;
++			if (pathbuf) {
++				p = d_path(&curlun->filp->f_path,
++					   pathbuf, PATH_MAX);
++				if (IS_ERR(p))
++					p = NULL;
++			}
++			LINFO(curlun, "ro=%d, nofua=%d, file: %s\n",
++			      curlun->ro, curlun->nofua, (p ? p : "(error)"));
++		}
++	}
++	kfree(pathbuf);
++
++	DBG(fsg, "transport=%s (x%02x)\n",
++			mod_data.transport_name, mod_data.transport_type);
++	DBG(fsg, "protocol=%s (x%02x)\n",
++			mod_data.protocol_name, mod_data.protocol_type);
++	DBG(fsg, "VendorID=x%04x, ProductID=x%04x, Release=x%04x\n",
++			mod_data.vendor, mod_data.product, mod_data.release);
++	DBG(fsg, "removable=%d, stall=%d, cdrom=%d, buflen=%u\n",
++			mod_data.removable, mod_data.can_stall,
++			mod_data.cdrom, mod_data.buflen);
++	DBG(fsg, "I/O thread pid: %d\n", task_pid_nr(fsg->thread_task));
++
++	set_bit(REGISTERED, &fsg->atomic_bitflags);
++
++	/* Tell the thread to start working */
++	wake_up_process(fsg->thread_task);
++	return 0;
++
++autoconf_fail:
++	ERROR(fsg, "unable to autoconfigure all endpoints\n");
++	rc = -ENOTSUPP;
++
++out:
++	fsg->state = FSG_STATE_TERMINATED;	// The thread is dead
++	fsg_unbind(gadget);
++	complete(&fsg->thread_notifier);
++	return rc;
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static void fsg_suspend(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "suspend\n");
++	set_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++static void fsg_resume(struct usb_gadget *gadget)
++{
++	struct fsg_dev		*fsg = get_gadget_data(gadget);
++
++	DBG(fsg, "resume\n");
++	clear_bit(SUSPENDED, &fsg->atomic_bitflags);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver		fsg_driver = {
++	.max_speed	= USB_SPEED_SUPER,
++	.function	= (char *) fsg_string_product,
++	.unbind		= fsg_unbind,
++	.disconnect	= fsg_disconnect,
++	.setup		= fsg_setup,
++	.suspend	= fsg_suspend,
++	.resume		= fsg_resume,
++
++	.driver		= {
++		.name		= DRIVER_NAME,
++		.owner		= THIS_MODULE,
++		// .release = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++
++static int __init fsg_alloc(void)
++{
++	struct fsg_dev		*fsg;
++
++	fsg = kzalloc(sizeof *fsg +
++		      fsg_num_buffers * sizeof *(fsg->buffhds), GFP_KERNEL);
++
++	if (!fsg)
++		return -ENOMEM;
++	spin_lock_init(&fsg->lock);
++	init_rwsem(&fsg->filesem);
++	kref_init(&fsg->ref);
++	init_completion(&fsg->thread_notifier);
++
++	the_fsg = fsg;
++	return 0;
++}
++
++
++static int __init fsg_init(void)
++{
++	int		rc;
++	struct fsg_dev	*fsg;
++
++	rc = fsg_num_buffers_validate();
++	if (rc != 0)
++		return rc;
++
++	if ((rc = fsg_alloc()) != 0)
++		return rc;
++	fsg = the_fsg;
++	if ((rc = usb_gadget_probe_driver(&fsg_driver, fsg_bind)) != 0)
++		kref_put(&fsg->ref, fsg_release);
++	return rc;
++}
++module_init(fsg_init);
++
++
++static void __exit fsg_cleanup(void)
++{
++	struct fsg_dev	*fsg = the_fsg;
++
++	/* Unregister the driver iff the thread hasn't already done so */
++	if (test_and_clear_bit(REGISTERED, &fsg->atomic_bitflags))
++		usb_gadget_unregister_driver(&fsg_driver);
++
++	/* Wait for the thread to finish up */
++	wait_for_completion(&fsg->thread_notifier);
++
++	kref_put(&fsg->ref, fsg_release);
++}
++module_exit(fsg_cleanup);
+diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
+index a9707da..e252b95 100644
+--- a/drivers/usb/host/Kconfig
++++ b/drivers/usb/host/Kconfig
+@@ -689,6 +689,19 @@ config USB_HWA_HCD
+ 	  To compile this driver a module, choose M here: the module
+ 	  will be called "hwa-hc".
+ 
++config USB_DWCOTG
++	tristate "Synopsis DWC host support"
++	depends on USB
++	help
++	  The Synopsis DWC controller is a dual-role
++	  host/peripheral/OTG ("On The Go") USB controllers.
++
++	  Enable this option to support this IP in host controller mode.
++	  If unsure, say N.
++
++	  To compile this driver as a module, choose M here: the
++	  modules built will be called dwc_otg and dwc_common_port.
++
+ config USB_IMX21_HCD
+        tristate "i.MX21 HCD support"
+        depends on ARM && ARCH_MXC
+diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile
+index 7530468..876f024 100644
+--- a/drivers/usb/host/Makefile
++++ b/drivers/usb/host/Makefile
+@@ -63,6 +63,8 @@ obj-$(CONFIG_USB_U132_HCD)	+= u132-hcd.o
+ obj-$(CONFIG_USB_R8A66597_HCD)	+= r8a66597-hcd.o
+ obj-$(CONFIG_USB_ISP1760_HCD)	+= isp1760.o
+ obj-$(CONFIG_USB_HWA_HCD)	+= hwa-hc.o
++
++obj-$(CONFIG_USB_DWCOTG)        += dwc_otg/ dwc_common_port/
+ obj-$(CONFIG_USB_IMX21_HCD)	+= imx21-hcd.o
+ obj-$(CONFIG_USB_FSL_MPH_DR_OF)	+= fsl-mph-dr-of.o
+ obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o
+diff --git a/drivers/usb/host/dwc_common_port/Makefile b/drivers/usb/host/dwc_common_port/Makefile
+new file mode 100644
+index 0000000..f10d466
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile
+@@ -0,0 +1,58 @@
++#
++# Makefile for DWC_common library
++#
++
++ifneq ($(KERNELRELEASE),)
++
++ccflags-y	+= -DDWC_LINUX
++#ccflags-y	+= -DDEBUG
++#ccflags-y	+= -DDWC_DEBUG_REGS
++#ccflags-y	+= -DDWC_DEBUG_MEMORY
++
++ccflags-y	+= -DDWC_LIBMODULE
++ccflags-y	+= -DDWC_CCLIB
++#ccflags-y	+= -DDWC_CRYPTOLIB
++ccflags-y	+= -DDWC_NOTIFYLIB
++ccflags-y	+= -DDWC_UTFLIB
++
++obj-$(CONFIG_USB_DWCOTG)	+= dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++
++ifneq ($(kernrel3),2.6.20)
++# grayg - I only know that we use ccflags-y in 2.6.31 actually
++ccflags-y += $(CPPFLAGS)
++endif
++
++else
++
++#ifeq ($(KDIR),)
++#$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++#endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff --git a/drivers/usb/host/dwc_common_port/Makefile.fbsd b/drivers/usb/host/dwc_common_port/Makefile.fbsd
+new file mode 100644
+index 0000000..45db991
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile.fbsd
+@@ -0,0 +1,17 @@
++CFLAGS	+= -I/sys/i386/compile/GENERIC -I/sys/i386/include -I/usr/include
++CFLAGS	+= -DDWC_FREEBSD
++CFLAGS	+= -DDEBUG
++#CFLAGS	+= -DDWC_DEBUG_REGS
++#CFLAGS	+= -DDWC_DEBUG_MEMORY
++
++#CFLAGS	+= -DDWC_LIBMODULE
++#CFLAGS	+= -DDWC_CCLIB
++#CFLAGS	+= -DDWC_CRYPTOLIB
++#CFLAGS	+= -DDWC_NOTIFYLIB
++#CFLAGS	+= -DDWC_UTFLIB
++
++KMOD = dwc_common_port_lib
++SRCS = dwc_cc.c dwc_modpow.c dwc_dh.c dwc_crypto.c dwc_notifier.c \
++       dwc_common_fbsd.c dwc_mem.c
++
++.include <bsd.kmod.mk>
+diff --git a/drivers/usb/host/dwc_common_port/Makefile.linux b/drivers/usb/host/dwc_common_port/Makefile.linux
+new file mode 100644
+index 0000000..0cef7b4
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/Makefile.linux
+@@ -0,0 +1,49 @@
++#
++# Makefile for DWC_common library
++#
++ifneq ($(KERNELRELEASE),)
++
++ccflags-y	+= -DDWC_LINUX
++#ccflags-y	+= -DDEBUG
++#ccflags-y	+= -DDWC_DEBUG_REGS
++#ccflags-y	+= -DDWC_DEBUG_MEMORY
++
++ccflags-y	+= -DDWC_LIBMODULE
++ccflags-y	+= -DDWC_CCLIB
++ccflags-y	+= -DDWC_CRYPTOLIB
++ccflags-y	+= -DDWC_NOTIFYLIB
++ccflags-y	+= -DDWC_UTFLIB
++
++obj-m			 := dwc_common_port_lib.o
++dwc_common_port_lib-objs := dwc_cc.o dwc_modpow.o dwc_dh.o \
++			    dwc_crypto.o dwc_notifier.o \
++			    dwc_common_linux.o dwc_mem.o
++
++else
++
++ifeq ($(KDIR),)
++$(error Must give "KDIR=/path/to/kernel/source" on command line or in environment)
++endif
++
++ifeq ($(ARCH),)
++$(error Must give "ARCH=<arch>" on command line or in environment. Also, if \
++ cross-compiling, must give "CROSS_COMPILE=/path/to/compiler/plus/tool-prefix-")
++endif
++
++ifeq ($(DOXYGEN),)
++DOXYGEN		:= doxygen
++endif
++
++default:
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++endif
++
++clean:
++	rm -rf *.o *.ko .*.cmd *.mod.c .*.o.d .*.o.tmp modules.order Module.markers Module.symvers .tmp_versions/
+diff --git a/drivers/usb/host/dwc_common_port/changes.txt b/drivers/usb/host/dwc_common_port/changes.txt
+new file mode 100644
+index 0000000..f6839f9
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/changes.txt
+@@ -0,0 +1,174 @@
++
++dwc_read_reg32() and friends now take an additional parameter, a pointer to an
++IO context struct. The IO context struct should live in an os-dependent struct
++in your driver. As an example, the dwc_usb3 driver has an os-dependent struct
++named 'os_dep' embedded in the main device struct. So there these calls look
++like this:
++
++	dwc_read_reg32(&usb3_dev->os_dep.ioctx, &pcd->dev_global_regs->dcfg);
++
++	dwc_write_reg32(&usb3_dev->os_dep.ioctx,
++			&pcd->dev_global_regs->dcfg, 0);
++
++Note that for the existing Linux driver ports, it is not necessary to actually
++define the 'ioctx' member in the os-dependent struct. Since Linux does not
++require an IO context, its macros for dwc_read_reg32() and friends do not
++use the context pointer, so it is optimized away by the compiler. But it is
++necessary to add the pointer parameter to all of the call sites, to be ready
++for any future ports (such as FreeBSD) which do require an IO context.
++
++
++Similarly, dwc_alloc(), dwc_alloc_atomic(), dwc_strdup(), and dwc_free() now
++take an additional parameter, a pointer to a memory context. Examples:
++
++	addr = dwc_alloc(&usb3_dev->os_dep.memctx, size);
++
++	dwc_free(&usb3_dev->os_dep.memctx, addr);
++
++Again, for the Linux ports, it is not necessary to actually define the memctx
++member, but it is necessary to add the pointer parameter to all of the call
++sites.
++
++
++Same for dwc_dma_alloc() and dwc_dma_free(). Examples:
++
++	virt_addr = dwc_dma_alloc(&usb3_dev->os_dep.dmactx, size, &phys_addr);
++
++	dwc_dma_free(&usb3_dev->os_dep.dmactx, size, virt_addr, phys_addr);
++
++
++Same for dwc_mutex_alloc() and dwc_mutex_free(). Examples:
++
++	mutex = dwc_mutex_alloc(&usb3_dev->os_dep.mtxctx);
++
++	dwc_mutex_free(&usb3_dev->os_dep.mtxctx, mutex);
++
++
++Same for dwc_spinlock_alloc() and dwc_spinlock_free(). Examples:
++
++	lock = dwc_spinlock_alloc(&usb3_dev->osdep.splctx);
++
++	dwc_spinlock_free(&usb3_dev->osdep.splctx, lock);
++
++
++Same for dwc_timer_alloc(). Example:
++
++	timer = dwc_timer_alloc(&usb3_dev->os_dep.tmrctx, "dwc_usb3_tmr1",
++				cb_func, cb_data);
++
++
++Same for dwc_waitq_alloc(). Example:
++
++	waitq = dwc_waitq_alloc(&usb3_dev->os_dep.wtqctx);
++
++
++Same for dwc_thread_run(). Example:
++
++	thread = dwc_thread_run(&usb3_dev->os_dep.thdctx, func,
++				"dwc_usb3_thd1", data);
++
++
++Same for dwc_workq_alloc(). Example:
++
++	workq = dwc_workq_alloc(&usb3_dev->osdep.wkqctx, "dwc_usb3_wkq1");
++
++
++Same for dwc_task_alloc(). Example:
++
++	task = dwc_task_alloc(&usb3_dev->os_dep.tskctx, "dwc_usb3_tsk1",
++			      cb_func, cb_data);
++
++
++In addition to the context pointer additions, a few core functions have had
++other changes made to their parameters:
++
++The 'flags' parameter to dwc_spinlock_irqsave() and dwc_spinunlock_irqrestore()
++has been changed from a uint64_t to a dwc_irqflags_t.
++
++dwc_thread_should_stop() now takes a 'dwc_thread_t *' parameter, because the
++FreeBSD equivalent of that function requires it.
++
++And, in addition to the context pointer, dwc_task_alloc() also adds a
++'char *name' parameter, to be consistent with dwc_thread_run() and
++dwc_workq_alloc(), and because the FreeBSD equivalent of that function
++requires a unique name.
++
++
++Here is a complete list of the core functions that now take a pointer to a
++context as their first parameter:
++
++	dwc_read_reg32
++	dwc_read_reg64
++	dwc_write_reg32
++	dwc_write_reg64
++	dwc_modify_reg32
++	dwc_modify_reg64
++	dwc_alloc
++	dwc_alloc_atomic
++	dwc_strdup
++	dwc_free
++	dwc_dma_alloc
++	dwc_dma_free
++	dwc_mutex_alloc
++	dwc_mutex_free
++	dwc_spinlock_alloc
++	dwc_spinlock_free
++	dwc_timer_alloc
++	dwc_waitq_alloc
++	dwc_thread_run
++	dwc_workq_alloc
++	dwc_task_alloc     Also adds a 'char *name' as its 2nd parameter
++
++And here are the core functions that have other changes to their parameters:
++
++	dwc_spinlock_irqsave      'flags' param is now a 'dwc_irqflags_t *'
++	dwc_spinunlock_irqrestore 'flags' param is now a 'dwc_irqflags_t'
++	dwc_thread_should_stop    Adds a 'dwc_thread_t *' parameter
++
++
++
++The changes to the core functions also require some of the other library
++functions to change:
++
++	dwc_cc_if_alloc() and dwc_cc_if_free() now take a 'void *memctx'
++	(for memory allocation) as the 1st param and a 'void *mtxctx'
++	(for mutex allocation) as the 2nd param.
++
++	dwc_cc_clear(), dwc_cc_add(), dwc_cc_change(), dwc_cc_remove(),
++	dwc_cc_data_for_save(), and dwc_cc_restore_from_data() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_dh_modpow(), dwc_dh_pk(), and dwc_dh_derive_keys() now take a
++	'void *memctx' as the 1st param.
++
++	dwc_modpow() now takes a 'void *memctx' as the 1st param.
++
++	dwc_alloc_notification_manager() now takes a 'void *memctx' as the
++	1st param and a 'void *wkqctx' (for work queue allocation) as the 2nd
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures or work queue fails.
++
++	dwc_register_notifier() now takes a 'void *memctx' as the 1st param.
++
++	dwc_memory_debug_start() now takes a 'void *mem_ctx' as the first
++	param, and also now returns an integer value that is non-zero if
++	allocation of its data structures fails.
++
++
++
++Other miscellaneous changes:
++
++The DEBUG_MEMORY and DEBUG_REGS #define's have been renamed to
++DWC_DEBUG_MEMORY and DWC_DEBUG_REGS.
++
++The following #define's have been added to allow selectively compiling library
++features:
++
++	DWC_CCLIB
++	DWC_CRYPTOLIB
++	DWC_NOTIFYLIB
++	DWC_UTFLIB
++
++A DWC_LIBMODULE #define has also been added. If this is not defined, then the
++module code in dwc_common_linux.c is not compiled in. This allows linking the
++library code directly into a driver module, instead of as a standalone module.
+diff --git a/drivers/usb/host/dwc_common_port/doc/doxygen.cfg b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
+new file mode 100644
+index 0000000..89aa887
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/doc/doxygen.cfg
+@@ -0,0 +1,270 @@
++# Doxyfile 1.4.5
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "Synopsys DWC Portability and Common Library for UWB"
++PROJECT_NUMBER         =
++OUTPUT_DIRECTORY       = doc
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = YES
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        = ..
++STRIP_FROM_INC_PATH    =
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++DETAILS_AT_TOP         = YES
++INHERIT_DOCS           = YES
++SEPARATE_MEMBER_PAGES  = NO
++TAB_SIZE               = 8
++ALIASES                =
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++BUILTIN_STL_SUPPORT    = NO
++DISTRIBUTE_GROUP_DOC   = NO
++SUBGROUPING            = NO
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = NO
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = NO
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = YES
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = NO
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       =
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++FILE_VERSION_FILTER    =
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_NO_PARAMDOC       = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           =
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.cc \
++                         *.cxx \
++                         *.cpp \
++                         *.c++ \
++                         *.d \
++                         *.java \
++                         *.ii \
++                         *.ixx \
++                         *.ipp \
++                         *.i++ \
++                         *.inl \
++                         *.h \
++                         *.hh \
++                         *.hxx \
++                         *.hpp \
++                         *.h++ \
++                         *.idl \
++                         *.odl \
++                         *.cs \
++                         *.php \
++                         *.php3 \
++                         *.inc \
++                         *.m \
++                         *.mm \
++                         *.dox \
++                         *.py \
++                         *.C \
++                         *.CC \
++                         *.C++ \
++                         *.II \
++                         *.I++ \
++                         *.H \
++                         *.HH \
++                         *.H++ \
++                         *.CS \
++                         *.PHP \
++                         *.PHP3 \
++                         *.M \
++                         *.MM \
++                         *.PY
++RECURSIVE              = NO
++EXCLUDE                =
++EXCLUDE_SYMLINKS       = NO
++EXCLUDE_PATTERNS       =
++EXAMPLE_PATH           =
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             =
++INPUT_FILTER           =
++FILTER_PATTERNS        =
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = NO
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = YES
++REFERENCES_RELATION    = YES
++USE_HTAGS              = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          =
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            =
++HTML_FOOTER            =
++HTML_STYLESHEET        =
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               =
++HHC_LOCATION           =
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         =
++LATEX_HEADER           =
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    =
++RTF_EXTENSIONS_FILE    =
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             =
++XML_DTD                =
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX =
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = NO
++EXPAND_ONLY_PREDEF     = NO
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           =
++INCLUDE_FILE_PATTERNS  =
++PREDEFINED             = DEBUG DEBUG_MEMORY
++EXPAND_AS_DEFINED      =
++SKIP_FUNCTION_MACROS   = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references
++#---------------------------------------------------------------------------
++TAGFILES               =
++GENERATE_TAGFILE       =
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++GROUP_GRAPHS           = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = NO
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DIRECTORY_GRAPH        = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               =
++DOTFILE_DIRS           =
++MAX_DOT_GRAPH_DEPTH    = 1000
++DOT_TRANSPARENT        = NO
++DOT_MULTI_TARGETS      = NO
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff --git a/drivers/usb/host/dwc_common_port/dwc_cc.c b/drivers/usb/host/dwc_common_port/dwc_cc.c
+new file mode 100644
+index 0000000..5ec2ae2
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_cc.c
+@@ -0,0 +1,532 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.c $
++ * $Revision: #4 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621692 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CCLIB
++
++#include "dwc_cc.h"
++
++typedef struct dwc_cc
++{
++	uint32_t uid;
++	uint8_t chid[16];
++	uint8_t cdid[16];
++	uint8_t ck[16];
++	uint8_t *name;
++	uint8_t length;
++        DWC_CIRCLEQ_ENTRY(dwc_cc) list_entry;
++} dwc_cc_t;
++
++DWC_CIRCLEQ_HEAD(context_list, dwc_cc);
++
++/** The main structure for CC management.  */
++struct dwc_cc_if
++{
++	dwc_mutex_t *mutex;
++	char *filename;
++
++	unsigned is_host:1;
++
++	dwc_notifier_t *notifier;
++
++	struct context_list list;
++};
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++static dwc_cc_t *alloc_cc(void *mem_ctx, uint8_t *name, uint32_t length)
++{
++	dwc_cc_t *cc = dwc_alloc(mem_ctx, sizeof(dwc_cc_t));
++	if (!cc) {
++		return NULL;
++	}
++	DWC_MEMSET(cc, 0, sizeof(dwc_cc_t));
++
++	if (name) {
++		cc->length = length;
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			dwc_free(mem_ctx, cc);
++			return NULL;
++		}
++
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	return cc;
++}
++
++static void free_cc(void *mem_ctx, dwc_cc_t *cc)
++{
++	if (cc->name) {
++		dwc_free(mem_ctx, cc->name);
++	}
++	dwc_free(mem_ctx, cc);
++}
++
++static uint32_t next_uid(dwc_cc_if_t *cc_if)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid > uid) {
++			uid = cc->uid;
++		}
++	}
++
++	if (uid == 0) {
++		uid = 255;
++	}
++
++	return uid + 1;
++}
++
++static dwc_cc_t *cc_find(dwc_cc_if_t *cc_if, uint32_t uid)
++{
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (cc->uid == uid) {
++			return cc;
++		}
++	}
++	return NULL;
++}
++
++static unsigned int cc_data_size(dwc_cc_if_t *cc_if)
++{
++	unsigned int size = 0;
++	dwc_cc_t *cc;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		size += (48 + 1);
++		if (cc->name) {
++			size += cc->length;
++		}
++	}
++	return size;
++}
++
++static uint32_t cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->chid, chid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++static uint32_t cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++	dwc_cc_t *cc;
++
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		if (DWC_MEMCMP(cc->cdid, cdid, 16) == 0) {
++			uid = cc->uid;
++			break;
++		}
++	}
++	return uid;
++}
++
++/* Internal cc_add */
++static int32_t cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		      uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t *cc;
++	uint32_t uid;
++
++	if (cc_if->is_host) {
++		uid = cc_match_cdid(cc_if, cdid);
++	}
++	else {
++		uid = cc_match_chid(cc_if, chid);
++	}
++
++	if (uid) {
++		DWC_DEBUGC("Replacing previous connection context id=%d name=%p name_len=%d", uid, name, length);
++		cc = cc_find(cc_if, uid);
++	}
++	else {
++		cc = alloc_cc(mem_ctx, name, length);
++		cc->uid = next_uid(cc_if);
++		DWC_CIRCLEQ_INSERT_TAIL(&cc_if->list, cc, list_entry);
++	}
++
++	DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++
++	DWC_DEBUGC("Added connection context id=%d name=%p name_len=%d", cc->uid, name, length);
++	dump_bytes("CHID", cc->chid, 16);
++	dump_bytes("CDID", cc->cdid, 16);
++	dump_bytes("CK", cc->ck, 16);
++	return cc->uid;
++}
++
++/* Internal cc_clear */
++static void cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	while (!DWC_CIRCLEQ_EMPTY(&cc_if->list)) {
++		dwc_cc_t *cc = DWC_CIRCLEQ_FIRST(&cc_if->list);
++		DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++		free_cc(mem_ctx, cc);
++	}
++}
++
++dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
++			     dwc_notifier_t *notifier, unsigned is_host)
++{
++	dwc_cc_if_t *cc_if = NULL;
++
++	/* Allocate a common_cc_if structure */
++	cc_if = dwc_alloc(mem_ctx, sizeof(dwc_cc_if_t));
++
++	if (!cc_if)
++		return NULL;
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_ALLOC_LINUX_DEBUG(cc_if->mutex);
++#else
++	cc_if->mutex = dwc_mutex_alloc(mtx_ctx);
++#endif
++	if (!cc_if->mutex) {
++		dwc_free(mem_ctx, cc_if);
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&cc_if->list);
++	cc_if->is_host = is_host;
++	cc_if->notifier = notifier;
++	return cc_if;
++}
++
++void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if)
++{
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++	DWC_MUTEX_FREE(cc_if->mutex);
++#else
++	dwc_mutex_free(mtx_ctx, cc_if->mutex);
++#endif
++	cc_clear(mem_ctx, cc_if);
++	dwc_free(mem_ctx, cc_if);
++}
++
++static void cc_changed(dwc_cc_if_t *cc_if)
++{
++	if (cc_if->notifier) {
++		dwc_notify(cc_if->notifier, DWC_CC_LIST_CHANGED_NOTIFICATION, cc_if);
++	}
++}
++
++void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if)
++{
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++}
++
++int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	uint32_t uid;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_add(mem_ctx, cc_if, chid, cdid, ck, name, length);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	cc_changed(cc_if);
++
++	return uid;
++}
++
++void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id, uint8_t *chid,
++		   uint8_t *cdid, uint8_t *ck, uint8_t *name, uint8_t length)
++{
++	dwc_cc_t* cc;
++
++	DWC_DEBUGC("Change connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	if (chid) {
++		DWC_MEMCPY(&(cc->chid[0]), chid, 16);
++	}
++	if (cdid) {
++		DWC_MEMCPY(&(cc->cdid[0]), cdid, 16);
++	}
++	if (ck) {
++		DWC_MEMCPY(&(cc->ck[0]), ck, 16);
++	}
++
++	if (name) {
++		if (cc->name) {
++			dwc_free(mem_ctx, cc->name);
++		}
++		cc->name = dwc_alloc(mem_ctx, length);
++		if (!cc->name) {
++			DWC_ERROR("Out of memory in dwc_cc_change()\n");
++			DWC_MUTEX_UNLOCK(cc_if->mutex);
++			return;
++		}
++		cc->length = length;
++		DWC_MEMCPY(cc->name, name, length);
++	}
++
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++
++	DWC_DEBUGC("Changed connection context id=%d\n", id);
++	dump_bytes("New CHID", cc->chid, 16);
++	dump_bytes("New CDID", cc->cdid, 16);
++	dump_bytes("New CK", cc->ck, 16);
++}
++
++void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id)
++{
++	dwc_cc_t *cc;
++
++	DWC_DEBUGC("Removing connection context %d", id);
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (!cc) {
++		DWC_ERROR("Uid %d not found in cc list\n", id);
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&cc_if->list, cc, list_entry);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	free_cc(mem_ctx, cc);
++
++	cc_changed(cc_if);
++}
++
++uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if, unsigned int *length)
++{
++	uint8_t *buf, *x;
++	uint8_t zero = 0;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = cc_data_size(cc_if);
++	if (!(*length)) {
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	DWC_DEBUGC("Creating data for saving (length=%d)", *length);
++
++	buf = dwc_alloc(mem_ctx, *length);
++	if (!buf) {
++		*length = 0;
++		DWC_MUTEX_UNLOCK(cc_if->mutex);
++		return NULL;
++	}
++
++	x = buf;
++	DWC_CIRCLEQ_FOREACH(cc, &cc_if->list, list_entry) {
++		DWC_MEMCPY(x, cc->chid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->cdid, 16);
++		x += 16;
++		DWC_MEMCPY(x, cc->ck, 16);
++		x += 16;
++		if (cc->name) {
++			DWC_MEMCPY(x, &cc->length, 1);
++			x += 1;
++			DWC_MEMCPY(x, cc->name, cc->length);
++			x += cc->length;
++		}
++		else {
++			DWC_MEMCPY(x, &zero, 1);
++			x += 1;
++		}
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return buf;
++}
++
++void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *data, uint32_t length)
++{
++	uint8_t name_length;
++	uint8_t *name;
++	uint8_t *chid;
++	uint8_t *cdid;
++	uint8_t *ck;
++	uint32_t i = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc_clear(mem_ctx, cc_if);
++
++	while (i < length) {
++		chid = &data[i];
++		i += 16;
++		cdid = &data[i];
++		i += 16;
++		ck = &data[i];
++		i += 16;
++
++		name_length = data[i];
++		i ++;
++
++		if (name_length) {
++			name = &data[i];
++			i += name_length;
++		}
++		else {
++			name = NULL;
++		}
++
++		/* check to see if we haven't overflown the buffer */
++		if (i > length) {
++			DWC_ERROR("Data format error while attempting to load CCs "
++				  "(nlen=%d, iter=%d, buflen=%d).\n", name_length, i, length);
++			break;
++		}
++
++		cc_add(mem_ctx, cc_if, chid, cdid, ck, name, name_length);
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	cc_changed(cc_if);
++}
++
++uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_chid(cc_if, chid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid)
++{
++	uint32_t uid = 0;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	uid = cc_match_cdid(cc_if, cdid);
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++	return uid;
++}
++
++uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *ck = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		ck = cc->ck;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return ck;
++
++}
++
++uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->chid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		retval = cc->cdid;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length)
++{
++	uint8_t *retval = NULL;
++	dwc_cc_t *cc;
++
++	DWC_MUTEX_LOCK(cc_if->mutex);
++	*length = 0;
++	cc = cc_find(cc_if, id);
++	if (cc) {
++		*length = cc->length;
++		retval = cc->name;
++	}
++	DWC_MUTEX_UNLOCK(cc_if->mutex);
++
++	return retval;
++}
++
++#endif	/* DWC_CCLIB */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_cc.h b/drivers/usb/host/dwc_common_port/dwc_cc.h
+new file mode 100644
+index 0000000..f86e6f2
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_cc.h
+@@ -0,0 +1,224 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_cc.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_CC_H_
++#define _DWC_CC_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines the Context Context library.
++ *
++ * The main data structure is dwc_cc_if_t which is returned by either the
++ * dwc_cc_if_alloc function or returned by the module to the user via a provided
++ * function. The data structure is opaque and should only be manipulated via the
++ * functions provied in this API.
++ *
++ * It manages a list of connection contexts and operations can be performed to
++ * add, remove, query, search, and change, those contexts.  Additionally,
++ * a dwc_notifier_t object can be requested from the manager so that
++ * the user can be notified whenever the context list has changed.
++ */
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++#include "dwc_notifier.h"
++
++
++/* Notifications */
++#define DWC_CC_LIST_CHANGED_NOTIFICATION "DWC_CC_LIST_CHANGED_NOTIFICATION"
++
++struct dwc_cc_if;
++typedef struct dwc_cc_if dwc_cc_if_t;
++
++
++/** @name Connection Context Operations */
++/** @{ */
++
++/** This function allocates memory for a dwc_cc_if_t structure, initializes
++ * fields to default values, and returns a pointer to the structure or NULL on
++ * error. */
++extern dwc_cc_if_t *dwc_cc_if_alloc(void *mem_ctx, void *mtx_ctx,
++				    dwc_notifier_t *notifier, unsigned is_host);
++
++/** Frees the memory for the specified CC structure allocated from
++ * dwc_cc_if_alloc(). */
++extern void dwc_cc_if_free(void *mem_ctx, void *mtx_ctx, dwc_cc_if_t *cc_if);
++
++/** Removes all contexts from the connection context list */
++extern void dwc_cc_clear(void *mem_ctx, dwc_cc_if_t *cc_if);
++
++/** Adds a connection context (CHID, CK, CDID, Name) to the connection context list.
++ * If a CHID already exists, the CK and name are overwritten.  Statistics are
++ * not overwritten.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.
++ * @param name An optional host friendly name as defined in the association model
++ * spec.  Must be a UTF16-LE unicode string.  Can be NULL to indicated no name.
++ * @param length The length othe unicode string.
++ * @return A unique identifier used to refer to this context that is valid for
++ * as long as this context is still in the list. */
++extern int32_t dwc_cc_add(void *mem_ctx, dwc_cc_if_t *cc_if, uint8_t *chid,
++			  uint8_t *cdid, uint8_t *ck, uint8_t *name,
++			  uint8_t length);
++
++/** Changes the CHID, CK, CDID, or Name values of a connection context in the
++ * list, preserving any accumulated statistics.  This would typically be called
++ * if the host decideds to change the context with a SET_CONNECTION request.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @param chid A pointer to the 16-byte CHID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param cdid A pointer to the 16-byte CDID.  This value will be copied.  NULL
++ * indicates no change.
++ * @param ck A pointer to the 16-byte CK.  This value will be copied.  NULL
++ * indicates no change.
++ * @param name Host friendly name UTF16-LE.  NULL indicates no change.
++ * @param length Length of name. */
++extern void dwc_cc_change(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id,
++			  uint8_t *chid, uint8_t *cdid, uint8_t *ck,
++			  uint8_t *name, uint8_t length);
++
++/** Remove the specified connection context.
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context to remove. */
++extern void dwc_cc_remove(void *mem_ctx, dwc_cc_if_t *cc_if, int32_t id);
++
++/** Get a binary block of data for the connection context list and attributes.
++ * This data can be used by the OS specific driver to save the connection
++ * context list into non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param length Return the length of the data buffer.
++ * @return A pointer to the data buffer.  The memory for this buffer should be
++ * freed with DWC_FREE() after use. */
++extern uint8_t *dwc_cc_data_for_save(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     unsigned int *length);
++
++/** Restore the connection context list from the binary data that was previously
++ * returned from a call to dwc_cc_data_for_save.  This can be used by the OS specific
++ * driver to load a connection context list from non-volatile memory.
++ *
++ * @param cc_if The cc_if structure.
++ * @param data The data bytes as returned from dwc_cc_data_for_save.
++ * @param length The length of the data. */
++extern void dwc_cc_restore_from_data(void *mem_ctx, dwc_cc_if_t *cc_if,
++				     uint8_t *data, unsigned int length);
++
++/** Find the connection context from the specified CHID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param chid A pointer to the CHID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_chid(dwc_cc_if_t *cc_if, uint8_t *chid);
++
++/** Find the connection context from the specified CDID.
++ *
++ * @param cc_if The cc_if structure.
++ * @param cdid A pointer to the CDID data.
++ * @return A non-zero identifier of the connection context if the CHID matches.
++ * Otherwise returns 0. */
++extern uint32_t dwc_cc_match_cdid(dwc_cc_if_t *cc_if, uint8_t *cdid);
++
++/** Retrieve the CK from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CK data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_ck(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CHID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CHID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_chid(dwc_cc_if_t *cc_if, int32_t id);
++
++/** Retrieve the CDID from the specified connection context.
++ *
++ * @param cc_if The cc_if structure.
++ * @param id The identifier of the connection context.
++ * @return A pointer to the CDID data.  The memory does not need to be freed. */
++extern uint8_t *dwc_cc_cdid(dwc_cc_if_t *cc_if, int32_t id);
++
++extern uint8_t *dwc_cc_name(dwc_cc_if_t *cc_if, int32_t id, uint8_t *length);
++
++/** Checks a buffer for non-zero.
++ * @param id A pointer to a 16 byte buffer.
++ * @return true if the 16 byte value is non-zero. */
++static inline unsigned dwc_assoc_is_not_zero_id(uint8_t *id) {
++	int i;
++	for (i=0; i<16; i++) {
++		if (id[i]) return 1;
++	}
++	return 0;
++}
++
++/** Checks a buffer for zero.
++ * @param id A pointer to a 16 byte buffer.
++ * @return true if the 16 byte value is zero. */
++static inline unsigned dwc_assoc_is_zero_id(uint8_t *id) {
++	return !dwc_assoc_is_not_zero_id(id);
++}
++
++/** Prints an ASCII representation for the 16-byte chid, cdid, or ck, into
++ * buffer. */
++static inline int dwc_print_id_string(char *buffer, uint8_t *id) {
++	char *ptr = buffer;
++	int i;
++	for (i=0; i<16; i++) {
++		ptr += DWC_SPRINTF(ptr, "%02x", id[i]);
++		if (i < 15) {
++			ptr += DWC_SPRINTF(ptr, " ");
++		}
++	}
++	return ptr - buffer;
++}
++
++/** @} */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CC_H_ */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
+new file mode 100644
+index 0000000..6dd04b5
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_fbsd.c
+@@ -0,0 +1,1308 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the FreeBSD 7.0 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++static void dmamap_cb(void *arg, bus_dma_segment_t *segs, int nseg, int error)
++{
++	if (error)
++		return;
++	*(bus_addr_t *)arg = segs[0].ds_addr;
++}
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dma_tag_create(
++#if __FreeBSD_version >= 700000
++			bus_get_dma_tag(dma->dev),	/* parent */
++#else
++			NULL,				/* parent */
++#endif
++			4, 0,				/* alignment, bounds */
++			BUS_SPACE_MAXADDR_32BIT,	/* lowaddr */
++			BUS_SPACE_MAXADDR,		/* highaddr */
++			NULL, NULL,			/* filter, filterarg */
++			size,				/* maxsize */
++			1,				/* nsegments */
++			size,				/* maxsegsize */
++			0,				/* flags */
++			NULL,				/* lockfunc */
++			NULL,				/* lockarg */
++			&dma->dma_tag);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dma_tag_create failed: %d\n",
++			      __func__, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_alloc(dma->dma_tag, &dma->dma_vaddr,
++				 BUS_DMA_NOWAIT | BUS_DMA_COHERENT, &dma->dma_map);
++	if (error) {
++		device_printf(dma->dev, "%s: bus_dmamem_alloc(%ju) failed: %d\n",
++			      __func__, (uintmax_t)size, error);
++		goto fail_1;
++	}
++
++	dma->dma_paddr = 0;
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr, size,
++				dmamap_cb, &dma->dma_paddr, BUS_DMA_NOWAIT);
++	if (error || dma->dma_paddr == 0) {
++		device_printf(dma->dev, "%s: bus_dmamap_load failed: %d\n",
++			      __func__, error);
++		goto fail_2;
++	}
++
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_2:
++	bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++	bus_dma_tag_destroy(dma->dma_tag);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_tag = NULL;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_tag == NULL)
++		return;
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
++		dma->dma_map = NULL;
++	}
++
++	bus_dma_tag_destroy(dma->dma_tag);
++	dma->dma_tag = NULL;
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct mtx *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	mtx_init(sl, "dw3spn", NULL, MTX_SPIN);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct mtx *sl = (struct mtx *)lock;
++
++	mtx_destroy(sl);
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	mtx_lock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	mtx_unlock_spin((struct mtx *)lock);	// ???
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	mtx_lock_spin((struct mtx *)lock);
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	mtx_unlock_spin((struct mtx *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mtx *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mtx));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	m = (struct mtx *)mutex;
++	mtx_init(m, "dw3mtx", NULL, MTX_DEF);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mtx_destroy((struct mtx *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	return mtx_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mtx *m = (struct mtx *)mutex;
++
++	mtx_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	pause("dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t, 1);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct mtx lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	mtx_init(&wq->lock, "dw3wtq", NULL, MTX_DEF);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	mtx_destroy(&wq->lock);
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++//	intrmask_t ipl;
++	int result = 0;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wat", 0); // infinite timeout
++//		ipl = splbio();
++	}
++
++	if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {	// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else if (wq->abort) {
++		result = -DWC_E_ABORT;
++
++	} else {
++		result = 0;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++//	intrmask_t ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++//		splx(ipl);
++		getmicrouptime(&tv1);
++		result = msleep(wq, &wq->lock, PCATCH, "dw3wto", tvtohz(&tv));
++		getmicrouptime(&tv2);
++//		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			result = -DWC_E_ABORT;
++		} else {
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else if (result == ERESTART) {	// signaled - restart
++		result = -DWC_E_RESTART;
++
++	} else if (result == EINTR) {		// signaled - interrupt
++		result = -DWC_E_ABORT;
++
++	} else {				// timed out
++		result = -DWC_E_TIMEOUT;
++	}
++
++	wq->abort = 0;
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++//	intrmask_t ipl;
++
++	mtx_lock(&wq->lock);
++//	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++//	splx(ipl);
++	mtx_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create((void (*)(void *))func, data, &thread->proc,
++				RFPROC | RFNOWAIT, 0, "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU [ How can we ensure this on FreeBSD? Does it matter? ]
++ - Different tasklets can be running simultaneously on different CPUs [ shouldn't matter ]
++ */
++struct dwc_tasklet {
++	struct task t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data, int pending)	// what to do with pending ???
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++		TASK_INIT(&task->t, 0, tasklet_callback, task);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	taskqueue_drain(taskqueue_fast, &task->t);	// ???
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	/* Uses predefined system queue */
++	taskqueue_enqueue_fast(taskqueue_fast, &task->t);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct task task;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct taskqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(void *data, int pending)	// what to do with pending ???
++{
++	work_container_t *container = (work_container_t *)data;
++	dwc_workq_t *wq = container->wq;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		pause("dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	wq->taskq = taskqueue_create(name, M_NOWAIT, taskqueue_thread_enqueue, &wq->taskq);
++	if (!wq->taskq) {
++		DWC_ERROR("Cannot allocate memory for taskqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	taskqueue_start_threads(&wq->taskq, 1, PWAIT, "%s taskq", "dw3tsk");
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	taskqueue_free(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		DWC_CIRCLEQ_FOREACH(container, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	taskqueue_free(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++
++	TASK_INIT(&container->task, 0, do_work, container);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	taskqueue_enqueue_fast(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff --git a/drivers/usb/host/dwc_common_port/dwc_common_linux.c b/drivers/usb/host/dwc_common_port/dwc_common_linux.c
+new file mode 100644
+index 0000000..440bcfc
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_linux.c
+@@ -0,0 +1,1421 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/kthread.h>
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the Linux kernel implementation of the DWC platform library. */
++#include <linux/moduleparam.h>
++#include <linux/ctype.h>
++#include <linux/crypto.h>
++#include <linux/delay.h>
++#include <linux/device.h>
++#include <linux/dma-mapping.h>
++#include <linux/cdev.h>
++#include <linux/errno.h>
++#include <linux/interrupt.h>
++#include <linux/jiffies.h>
++#include <linux/list.h>
++#include <linux/pci.h>
++#include <linux/random.h>
++#include <linux/scatterlist.h>
++#include <linux/slab.h>
++#include <linux/stat.h>
++#include <linux/string.h>
++#include <linux/timer.h>
++#include <linux/usb.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#include <asm/io.h>
++#include <asm/page.h>
++#include <asm/uaccess.h>
++#include <asm/unaligned.h>
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	return memmove(dest, src, size);
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(const char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtol(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(const char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = simple_strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++	return in_irq();
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++	return in_softirq();
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintk(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_WARNING);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_ERR);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++	BUG_ON(1);
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_PRINTF(KERN_DEBUG);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++#ifdef xxCOSIM /* Only works for 32-bit cosim */
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL);
++#else
++	void *buf = dma_alloc_coherent(dma_ctx, (size_t)size, dma_addr, GFP_KERNEL | GFP_DMA32);
++#endif
++	if (!buf) {
++		return NULL;
++	}
++
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	void *buf = dma_alloc_coherent(NULL, (size_t)size, dma_addr, GFP_ATOMIC);
++	if (!buf) {
++		return NULL;
++	}
++	memset(buf, 0, (size_t)size);
++	return buf;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dma_free_coherent(dma_ctx, size, virt_addr, dma_addr);
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_KERNEL);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return kzalloc(size, GFP_ATOMIC);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	kfree(addr);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld\n", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(uint32_t volatile *reg)
++{
++	return readl(reg);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(uint64_t volatile *reg)
++{
++}
++#endif
++
++void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value)
++{
++	writel(value, reg);
++}
++
++#if 0
++void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value)
++{
++}
++#endif
++
++void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask)
++{
++	writel((readl(reg) & ~clear_mask) | set_mask, reg);
++}
++
++#if 0
++void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask)
++{
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	spinlock_t *sl = (spinlock_t *)1;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	sl = DWC_ALLOC(sizeof(*sl));
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock\n");
++		return NULL;
++	}
++
++	spin_lock_init(sl);
++#endif
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	DWC_FREE(lock);
++#endif
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock((spinlock_t *)lock);
++#endif
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	dwc_irqflags_t f;
++
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_lock_irqsave((spinlock_t *)lock, f);
++#else
++	local_irq_save(f);
++#endif
++	*flags = f;
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++#if defined(CONFIG_PREEMPT) || defined(CONFIG_SMP)
++	spin_unlock_irqrestore((spinlock_t *)lock, flags);
++#else
++	local_irq_restore(flags);
++#endif
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	struct mutex *m;
++	dwc_mutex_t *mutex = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex\n");
++		return NULL;
++	}
++
++	m = (struct mutex *)mutex;
++	mutex_init(m);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	mutex_destroy((struct mutex *)mutex);
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_lock(m);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	return mutex_trylock(m);
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	struct mutex *m = (struct mutex *)mutex;
++	mutex_unlock(m);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	udelay(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	mdelay(msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	msleep(msecs);
++}
++
++uint32_t DWC_TIME(void)
++{
++	return jiffies_to_msecs(jiffies);
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct timer_list *t;
++	char *name;
++	dwc_timer_callback_t cb;
++	void *data;
++	uint8_t scheduled;
++	dwc_spinlock_t *lock;
++};
++
++static void timer_callback(unsigned long data)
++{
++	dwc_timer_t *timer = (dwc_timer_t *)data;
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++	timer->scheduled = 0;
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_DEBUGC("Timer %s callback", timer->name);
++	timer->cb(timer->data);
++}
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	t->t = DWC_ALLOC(sizeof(*t->t));
++	if (!t->t) {
++		DWC_ERROR("Cannot allocate memory for timer->t");
++		goto no_timer;
++	}
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for lock");
++		goto no_lock;
++	}
++
++	t->scheduled = 0;
++	t->t->base = &boot_tvec_bases;
++	t->t->expires = jiffies;
++	setup_timer(t->t, timer_callback, (unsigned long)t);
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t->t);
++ no_timer:
++	DWC_FREE(t);
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (timer->scheduled) {
++		del_timer(timer->t);
++		timer->scheduled = 0;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->t);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(timer->lock, &flags);
++
++	if (!timer->scheduled) {
++		timer->scheduled = 1;
++		DWC_DEBUGC("Scheduling timer %s to expire in +%d msec", timer->name, time);
++		timer->t->expires = jiffies + msecs_to_jiffies(time);
++		add_timer(timer->t);
++	} else {
++		DWC_DEBUGC("Modifying timer %s to expire in +%d msec", timer->name, time);
++		mod_timer(timer->t, jiffies + msecs_to_jiffies(time));
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(timer->lock, flags);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	del_timer(timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	wait_queue_head_t queue;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue\n");
++		return NULL;
++	}
++
++	init_waitqueue_head(&wq->queue);
++	wq->abort = 0;
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int result = wait_event_interruptible(wq->queue,
++					      cond(data) || wq->abort);
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result == 0) {
++		return 0;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	int32_t tmsecs;
++	int result = wait_event_interruptible_timeout(wq->queue,
++						      cond(data) || wq->abort,
++						      msecs_to_jiffies(msecs));
++	if (result == -ERESTARTSYS) {
++		wq->abort = 0;
++		return -DWC_E_RESTART;
++	}
++
++	if (wq->abort == 1) {
++		wq->abort = 0;
++		return -DWC_E_ABORT;
++	}
++
++	wq->abort = 0;
++
++	if (result > 0) {
++		tmsecs = jiffies_to_msecs(result);
++		if (!tmsecs) {
++			return 1;
++		}
++
++		return tmsecs;
++	}
++
++	if (result == 0) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wq->abort = 0;
++	wake_up_interruptible(&wq->queue);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	wq->abort = 1;
++	wake_up_interruptible(&wq->queue);
++}
++
++
++/* Threading */
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	struct task_struct *thread = kthread_run(func, data, name);
++
++	if (thread == ERR_PTR(-ENOMEM)) {
++		return NULL;
++	}
++
++	return (dwc_thread_t *)thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	return kthread_stop((struct task_struct *)thread);
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(void)
++{
++	return kthread_should_stop();
++}
++
++
++/* tasklets
++ - run in interrupt context (cannot sleep)
++ - each tasklet runs on a single CPU
++ - different tasklets can be running simultaneously on different CPUs
++ */
++struct dwc_tasklet {
++	struct tasklet_struct t;
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(unsigned long data)
++{
++	dwc_tasklet_t *t = (dwc_tasklet_t *)data;
++	t->cb(t->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (t) {
++		t->cb = cb;
++		t->data = data;
++		tasklet_init(&t->t, tasklet_callback, (unsigned long)t);
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet\n");
++	}
++
++	return t;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_schedule(&task->t);
++}
++
++
++/* workqueues
++ - run in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_ENTRY(work_container) entry;
++#endif
++	struct delayed_work work;
++} work_container_t;
++
++#ifdef DEBUG
++DWC_CIRCLEQ_HEAD(work_container_queue, work_container);
++#endif
++
++struct dwc_workq {
++	struct workqueue_struct *wq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++
++#ifdef DEBUG
++	struct work_container_queue entries;
++#endif
++};
++
++static void do_work(struct work_struct *work)
++{
++	dwc_irqflags_t flags;
++	struct delayed_work *dw = container_of(work, struct delayed_work, work);
++	work_container_t *container = container_of(dw, struct work_container, work);
++	dwc_workq_t *wq = container->wq;
++
++	container->cb(container->data);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_REMOVE(&wq->entries, container, entry);
++#endif
++	DWC_DEBUGC("Work done: %s, container=%p", container->name, container);
++	if (container->name) {
++		DWC_FREE(container->name);
++	}
++	DWC_FREE(container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		return NULL;
++	}
++
++	wq->wq = create_singlethread_workqueue(name);
++	if (!wq->wq) {
++		goto no_wq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		goto no_waitq;
++	}
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INIT(&wq->entries);
++#endif
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	destroy_workqueue(wq->wq);
++ no_wq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	if (wq->pending != 0) {
++		struct work_container *wc;
++		DWC_ERROR("Destroying work queue with pending work");
++		DWC_CIRCLEQ_FOREACH(wc, &wq->entries, entry) {
++			DWC_ERROR("Work %s still pending", wc->name);
++		}
++	}
++#endif
++	destroy_workqueue(wq->wq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_WORK(&container->work.work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_work(wq->wq, &container->work.work);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container\n");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name\n");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	DWC_DEBUGC("Queueing work: %s, container=%p", container->name, container);
++	INIT_DELAYED_WORK(&container->work, do_work);
++
++#ifdef DEBUG
++	DWC_CIRCLEQ_INSERT_TAIL(&wq->entries, container, entry);
++#endif
++	queue_delayed_work(wq->wq, &container->work, msecs_to_jiffies(time));
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
++
++
++#ifdef DWC_LIBMODULE
++
++#ifdef DWC_CCLIB
++/* CC */
++EXPORT_SYMBOL(dwc_cc_if_alloc);
++EXPORT_SYMBOL(dwc_cc_if_free);
++EXPORT_SYMBOL(dwc_cc_clear);
++EXPORT_SYMBOL(dwc_cc_add);
++EXPORT_SYMBOL(dwc_cc_remove);
++EXPORT_SYMBOL(dwc_cc_change);
++EXPORT_SYMBOL(dwc_cc_data_for_save);
++EXPORT_SYMBOL(dwc_cc_restore_from_data);
++EXPORT_SYMBOL(dwc_cc_match_chid);
++EXPORT_SYMBOL(dwc_cc_match_cdid);
++EXPORT_SYMBOL(dwc_cc_ck);
++EXPORT_SYMBOL(dwc_cc_chid);
++EXPORT_SYMBOL(dwc_cc_cdid);
++EXPORT_SYMBOL(dwc_cc_name);
++#endif	/* DWC_CCLIB */
++
++#ifdef DWC_CRYPTOLIB
++# ifndef CONFIG_MACH_IPMATE
++/* Modpow */
++EXPORT_SYMBOL(dwc_modpow);
++
++/* DH */
++EXPORT_SYMBOL(dwc_dh_modpow);
++EXPORT_SYMBOL(dwc_dh_derive_keys);
++EXPORT_SYMBOL(dwc_dh_pk);
++# endif	/* CONFIG_MACH_IPMATE */
++
++/* Crypto */
++EXPORT_SYMBOL(dwc_wusb_aes_encrypt);
++EXPORT_SYMBOL(dwc_wusb_cmf);
++EXPORT_SYMBOL(dwc_wusb_prf);
++EXPORT_SYMBOL(dwc_wusb_fill_ccm_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_nonce);
++EXPORT_SYMBOL(dwc_wusb_gen_key);
++EXPORT_SYMBOL(dwc_wusb_gen_mic);
++#endif	/* DWC_CRYPTOLIB */
++
++/* Notification */
++#ifdef DWC_NOTIFYLIB
++EXPORT_SYMBOL(dwc_alloc_notification_manager);
++EXPORT_SYMBOL(dwc_free_notification_manager);
++EXPORT_SYMBOL(dwc_register_notifier);
++EXPORT_SYMBOL(dwc_unregister_notifier);
++EXPORT_SYMBOL(dwc_add_observer);
++EXPORT_SYMBOL(dwc_remove_observer);
++EXPORT_SYMBOL(dwc_notify);
++#endif
++
++/* Memory Debugging Routines */
++#ifdef DWC_DEBUG_MEMORY
++EXPORT_SYMBOL(dwc_alloc_debug);
++EXPORT_SYMBOL(dwc_alloc_atomic_debug);
++EXPORT_SYMBOL(dwc_free_debug);
++EXPORT_SYMBOL(dwc_dma_alloc_debug);
++EXPORT_SYMBOL(dwc_dma_free_debug);
++#endif
++
++EXPORT_SYMBOL(DWC_MEMSET);
++EXPORT_SYMBOL(DWC_MEMCPY);
++EXPORT_SYMBOL(DWC_MEMMOVE);
++EXPORT_SYMBOL(DWC_MEMCMP);
++EXPORT_SYMBOL(DWC_STRNCMP);
++EXPORT_SYMBOL(DWC_STRCMP);
++EXPORT_SYMBOL(DWC_STRLEN);
++EXPORT_SYMBOL(DWC_STRCPY);
++EXPORT_SYMBOL(DWC_STRDUP);
++EXPORT_SYMBOL(DWC_ATOI);
++EXPORT_SYMBOL(DWC_ATOUI);
++
++#ifdef DWC_UTFLIB
++EXPORT_SYMBOL(DWC_UTF8_TO_UTF16LE);
++#endif	/* DWC_UTFLIB */
++
++EXPORT_SYMBOL(DWC_IN_IRQ);
++EXPORT_SYMBOL(DWC_IN_BH);
++EXPORT_SYMBOL(DWC_VPRINTF);
++EXPORT_SYMBOL(DWC_VSNPRINTF);
++EXPORT_SYMBOL(DWC_PRINTF);
++EXPORT_SYMBOL(DWC_SPRINTF);
++EXPORT_SYMBOL(DWC_SNPRINTF);
++EXPORT_SYMBOL(__DWC_WARN);
++EXPORT_SYMBOL(__DWC_ERROR);
++EXPORT_SYMBOL(DWC_EXCEPTION);
++
++#ifdef DEBUG
++EXPORT_SYMBOL(__DWC_DEBUG);
++#endif
++
++EXPORT_SYMBOL(__DWC_DMA_ALLOC);
++EXPORT_SYMBOL(__DWC_DMA_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_DMA_FREE);
++EXPORT_SYMBOL(__DWC_ALLOC);
++EXPORT_SYMBOL(__DWC_ALLOC_ATOMIC);
++EXPORT_SYMBOL(__DWC_FREE);
++
++#ifdef DWC_CRYPTOLIB
++EXPORT_SYMBOL(DWC_RANDOM_BYTES);
++EXPORT_SYMBOL(DWC_AES_CBC);
++EXPORT_SYMBOL(DWC_SHA256);
++EXPORT_SYMBOL(DWC_HMAC_SHA256);
++#endif
++
++EXPORT_SYMBOL(DWC_CPU_TO_LE32);
++EXPORT_SYMBOL(DWC_CPU_TO_BE32);
++EXPORT_SYMBOL(DWC_LE32_TO_CPU);
++EXPORT_SYMBOL(DWC_BE32_TO_CPU);
++EXPORT_SYMBOL(DWC_CPU_TO_LE16);
++EXPORT_SYMBOL(DWC_CPU_TO_BE16);
++EXPORT_SYMBOL(DWC_LE16_TO_CPU);
++EXPORT_SYMBOL(DWC_BE16_TO_CPU);
++EXPORT_SYMBOL(DWC_READ_REG32);
++EXPORT_SYMBOL(DWC_WRITE_REG32);
++EXPORT_SYMBOL(DWC_MODIFY_REG32);
++
++#if 0
++EXPORT_SYMBOL(DWC_READ_REG64);
++EXPORT_SYMBOL(DWC_WRITE_REG64);
++EXPORT_SYMBOL(DWC_MODIFY_REG64);
++#endif
++
++EXPORT_SYMBOL(DWC_SPINLOCK_ALLOC);
++EXPORT_SYMBOL(DWC_SPINLOCK_FREE);
++EXPORT_SYMBOL(DWC_SPINLOCK);
++EXPORT_SYMBOL(DWC_SPINUNLOCK);
++EXPORT_SYMBOL(DWC_SPINLOCK_IRQSAVE);
++EXPORT_SYMBOL(DWC_SPINUNLOCK_IRQRESTORE);
++EXPORT_SYMBOL(DWC_MUTEX_ALLOC);
++
++#if (!defined(DWC_LINUX) || !defined(CONFIG_DEBUG_MUTEXES))
++EXPORT_SYMBOL(DWC_MUTEX_FREE);
++#endif
++
++EXPORT_SYMBOL(DWC_MUTEX_LOCK);
++EXPORT_SYMBOL(DWC_MUTEX_TRYLOCK);
++EXPORT_SYMBOL(DWC_MUTEX_UNLOCK);
++EXPORT_SYMBOL(DWC_UDELAY);
++EXPORT_SYMBOL(DWC_MDELAY);
++EXPORT_SYMBOL(DWC_MSLEEP);
++EXPORT_SYMBOL(DWC_TIME);
++EXPORT_SYMBOL(DWC_TIMER_ALLOC);
++EXPORT_SYMBOL(DWC_TIMER_FREE);
++EXPORT_SYMBOL(DWC_TIMER_SCHEDULE);
++EXPORT_SYMBOL(DWC_TIMER_CANCEL);
++EXPORT_SYMBOL(DWC_WAITQ_ALLOC);
++EXPORT_SYMBOL(DWC_WAITQ_FREE);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT);
++EXPORT_SYMBOL(DWC_WAITQ_WAIT_TIMEOUT);
++EXPORT_SYMBOL(DWC_WAITQ_TRIGGER);
++EXPORT_SYMBOL(DWC_WAITQ_ABORT);
++EXPORT_SYMBOL(DWC_THREAD_RUN);
++EXPORT_SYMBOL(DWC_THREAD_STOP);
++EXPORT_SYMBOL(DWC_THREAD_SHOULD_STOP);
++EXPORT_SYMBOL(DWC_TASK_ALLOC);
++EXPORT_SYMBOL(DWC_TASK_FREE);
++EXPORT_SYMBOL(DWC_TASK_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_WAIT_WORK_DONE);
++EXPORT_SYMBOL(DWC_WORKQ_ALLOC);
++EXPORT_SYMBOL(DWC_WORKQ_FREE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE);
++EXPORT_SYMBOL(DWC_WORKQ_SCHEDULE_DELAYED);
++EXPORT_SYMBOL(DWC_WORKQ_PENDING);
++
++static int dwc_common_port_init_module(void)
++{
++	int result = 0;
++
++	printk(KERN_DEBUG "Module dwc_common_port init\n" );
++
++#ifdef DWC_DEBUG_MEMORY
++	result = dwc_memory_debug_start(NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_memory_debug_start() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++
++#ifdef DWC_NOTIFYLIB
++	result = dwc_alloc_notification_manager(NULL, NULL);
++	if (result) {
++		printk(KERN_ERR
++		       "dwc_alloc_notification_manager() failed with error %d\n",
++		       result);
++		return result;
++	}
++#endif
++	return result;
++}
++
++static void dwc_common_port_exit_module(void)
++{
++	printk(KERN_DEBUG "Module dwc_common_port exit\n" );
++
++#ifdef DWC_NOTIFYLIB
++	dwc_free_notification_manager();
++#endif
++
++#ifdef DWC_DEBUG_MEMORY
++	dwc_memory_debug_stop();
++#endif
++}
++
++module_init(dwc_common_port_init_module);
++module_exit(dwc_common_port_exit_module);
++
++MODULE_DESCRIPTION("DWC Common Library - Portable version");
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE ("GPL");
++
++#endif	/* DWC_LIBMODULE */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
+new file mode 100644
+index 0000000..49b07e1
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_common_nbsd.c
+@@ -0,0 +1,1275 @@
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++#ifdef DWC_CCLIB
++# include "dwc_cc.h"
++#endif
++
++#ifdef DWC_CRYPTOLIB
++# include "dwc_modpow.h"
++# include "dwc_dh.h"
++# include "dwc_crypto.h"
++#endif
++
++#ifdef DWC_NOTIFYLIB
++# include "dwc_notifier.h"
++#endif
++
++/* OS-Level Implementations */
++
++/* This is the NetBSD 4.0.1 kernel implementation of the DWC platform library. */
++
++
++/* MISC */
++
++void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size)
++{
++	return memset(dest, byte, size);
++}
++
++void *DWC_MEMCPY(void *dest, void const *src, uint32_t size)
++{
++	return memcpy(dest, src, size);
++}
++
++void *DWC_MEMMOVE(void *dest, void *src, uint32_t size)
++{
++	bcopy(src, dest, size);
++	return dest;
++}
++
++int DWC_MEMCMP(void *m1, void *m2, uint32_t size)
++{
++	return memcmp(m1, m2, size);
++}
++
++int DWC_STRNCMP(void *s1, void *s2, uint32_t size)
++{
++	return strncmp(s1, s2, size);
++}
++
++int DWC_STRCMP(void *s1, void *s2)
++{
++	return strcmp(s1, s2);
++}
++
++int DWC_STRLEN(char const *str)
++{
++	return strlen(str);
++}
++
++char *DWC_STRCPY(char *to, char const *from)
++{
++	return strcpy(to, from);
++}
++
++char *DWC_STRDUP(char const *str)
++{
++	int len = DWC_STRLEN(str) + 1;
++	char *new = DWC_ALLOC_ATOMIC(len);
++
++	if (!new) {
++		return NULL;
++	}
++
++	DWC_MEMCPY(new, str, len);
++	return new;
++}
++
++int DWC_ATOI(char *str, int32_t *value)
++{
++	char *end = NULL;
++
++	/* NetBSD doesn't have 'strtol' in the kernel, but 'strtoul'
++	 * should be equivalent on 2's complement machines
++	 */
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++int DWC_ATOUI(char *str, uint32_t *value)
++{
++	char *end = NULL;
++
++	*value = strtoul(str, &end, 0);
++	if (*end == '\0') {
++		return 0;
++	}
++
++	return -1;
++}
++
++
++#ifdef DWC_UTFLIB
++/* From usbstring.c */
++
++int DWC_UTF8_TO_UTF16LE(uint8_t const *s, uint16_t *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++#endif	/* DWC_UTFLIB */
++
++
++/* dwc_debug.h */
++
++dwc_bool_t DWC_IN_IRQ(void)
++{
++//	return in_irq();
++	return 0;
++}
++
++dwc_bool_t DWC_IN_BH(void)
++{
++//	return in_softirq();
++	return 0;
++}
++
++void DWC_VPRINTF(char *format, va_list args)
++{
++	vprintf(format, args);
++}
++
++int DWC_VSNPRINTF(char *str, int size, char *format, va_list args)
++{
++	return vsnprintf(str, size, format, args);
++}
++
++void DWC_PRINTF(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++int DWC_SPRINTF(char *buffer, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsprintf(buffer, format, args);
++	va_end(args);
++	return retval;
++}
++
++int DWC_SNPRINTF(char *buffer, int size, char *format, ...)
++{
++	int retval;
++	va_list args;
++
++	va_start(args, format);
++	retval = vsnprintf(buffer, size, format, args);
++	va_end(args);
++	return retval;
++}
++
++void __DWC_WARN(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void __DWC_ERROR(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++
++void DWC_EXCEPTION(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++//	BUG_ON(1);	???
++}
++
++#ifdef DEBUG
++void __DWC_DEBUG(char *format, ...)
++{
++	va_list args;
++
++	va_start(args, format);
++	DWC_VPRINTF(format, args);
++	va_end(args);
++}
++#endif
++
++
++/* dwc_mem.h */
++
++#if 0
++dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size,
++				uint32_t align,
++				uint32_t alloc)
++{
++	struct dma_pool *pool = dma_pool_create("Pool", NULL,
++						size, align, alloc);
++	return (dwc_pool_t *)pool;
++}
++
++void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool)
++{
++	dma_pool_destroy((struct dma_pool *)pool);
++}
++
++void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++//	return dma_pool_alloc((struct dma_pool *)pool, GFP_KERNEL, dma_addr);
++	return dma_pool_alloc((struct dma_pool *)pool, M_WAITOK, dma_addr);
++}
++
++void *DWC_DMA_POOL_ZALLOC(dwc_pool_t *pool, uint64_t *dma_addr)
++{
++	void *vaddr = DWC_DMA_POOL_ALLOC(pool, dma_addr);
++	memset(..);
++}
++
++void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr)
++{
++	dma_pool_free(pool, vaddr, daddr);
++}
++#endif
++
++void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++	int error;
++
++	error = bus_dmamem_alloc(dma->dma_tag, size, 1, size, dma->segs,
++				 sizeof(dma->segs) / sizeof(dma->segs[0]),
++				 &dma->nsegs, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamem_alloc(%ju) failed: %d\n", __func__,
++		       (uintmax_t)size, error);
++		goto fail_0;
++	}
++
++	error = bus_dmamem_map(dma->dma_tag, dma->segs, dma->nsegs, size,
++			       (caddr_t *)&dma->dma_vaddr,
++			       BUS_DMA_NOWAIT | BUS_DMA_COHERENT);
++	if (error) {
++		printf("%s: bus_dmamem_map failed: %d\n", __func__, error);
++		goto fail_1;
++	}
++
++	error = bus_dmamap_create(dma->dma_tag, size, 1, size, 0,
++				  BUS_DMA_NOWAIT, &dma->dma_map);
++	if (error) {
++		printf("%s: bus_dmamap_create failed: %d\n", __func__, error);
++		goto fail_2;
++	}
++
++	error = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
++				size, NULL, BUS_DMA_NOWAIT);
++	if (error) {
++		printf("%s: bus_dmamap_load failed: %d\n", __func__, error);
++		goto fail_3;
++	}
++
++	dma->dma_paddr = (bus_addr_t)dma->segs[0].ds_addr;
++	*dma_addr = dma->dma_paddr;
++	return dma->dma_vaddr;
++
++fail_3:
++	bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++fail_2:
++	bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++fail_1:
++	bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++fail_0:
++	dma->dma_map = NULL;
++	dma->dma_vaddr = NULL;
++	dma->nsegs = 0;
++
++	return NULL;
++}
++
++void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr)
++{
++	dwc_dmactx_t *dma = (dwc_dmactx_t *)dma_ctx;
++
++	if (dma->dma_map != NULL) {
++		bus_dmamap_sync(dma->dma_tag, dma->dma_map, 0, size,
++				BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
++		bus_dmamap_unload(dma->dma_tag, dma->dma_map);
++		bus_dmamap_destroy(dma->dma_tag, dma->dma_map);
++		bus_dmamem_unmap(dma->dma_tag, dma->dma_vaddr, size);
++		bus_dmamem_free(dma->dma_tag, dma->segs, dma->nsegs);
++		dma->dma_paddr = 0;
++		dma->dma_map = NULL;
++		dma->dma_vaddr = NULL;
++		dma->nsegs = 0;
++	}
++}
++
++void *__DWC_ALLOC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_WAITOK | M_ZERO);
++}
++
++void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size)
++{
++	return malloc(size, M_DEVBUF, M_NOWAIT | M_ZERO);
++}
++
++void __DWC_FREE(void *mem_ctx, void *addr)
++{
++	free(addr, M_DEVBUF);
++}
++
++
++#ifdef DWC_CRYPTOLIB
++/* dwc_crypto.h */
++
++void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length)
++{
++	get_random_bytes(buffer, length);
++}
++
++int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out)
++{
++	struct crypto_blkcipher *tfm;
++	struct blkcipher_desc desc;
++	struct scatterlist sgd;
++	struct scatterlist sgs;
++
++	tfm = crypto_alloc_blkcipher("cbc(aes)", 0, CRYPTO_ALG_ASYNC);
++	if (tfm == NULL) {
++		printk("failed to load transform for aes CBC\n");
++		return -1;
++	}
++
++	crypto_blkcipher_setkey(tfm, key, keylen);
++	crypto_blkcipher_set_iv(tfm, iv, 16);
++
++	sg_init_one(&sgd, out, messagelen);
++	sg_init_one(&sgs, message, messagelen);
++
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	if (crypto_blkcipher_encrypt(&desc, &sgd, &sgs, messagelen)) {
++		crypto_free_blkcipher(tfm);
++		DWC_ERROR("AES CBC encryption failed");
++		return -1;
++	}
++
++	crypto_free_blkcipher(tfm);
++	return 0;
++}
++
++int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("sha256", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for sha256: %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, len);
++	crypto_hash_digest(&desc, &sg, len, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen,
++		    uint8_t *key, uint32_t keylen, uint8_t *out)
++{
++	struct crypto_hash *tfm;
++	struct hash_desc desc;
++	struct scatterlist sg;
++
++	tfm = crypto_alloc_hash("hmac(sha256)", 0, CRYPTO_ALG_ASYNC);
++	if (IS_ERR(tfm)) {
++		DWC_ERROR("Failed to load transform for hmac(sha256): %ld", PTR_ERR(tfm));
++		return 0;
++	}
++	desc.tfm = tfm;
++	desc.flags = 0;
++
++	sg_init_one(&sg, message, messagelen);
++	crypto_hash_setkey(tfm, key, keylen);
++	crypto_hash_digest(&desc, &sg, messagelen, out);
++	crypto_free_hash(tfm);
++
++	return 1;
++}
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/* Byte Ordering Conversions */
++
++uint32_t DWC_CPU_TO_LE32(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_CPU_TO_BE32(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_LE32_TO_CPU(uint32_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint32_t DWC_BE32_TO_CPU(uint32_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++
++	return (u_p[3] | (u_p[2] << 8) | (u_p[1] << 16) | (u_p[0] << 24));
++#endif
++}
++
++uint16_t DWC_CPU_TO_LE16(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_CPU_TO_BE16(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_LE16_TO_CPU(uint16_t *p)
++{
++#ifdef __LITTLE_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++uint16_t DWC_BE16_TO_CPU(uint16_t *p)
++{
++#ifdef __BIG_ENDIAN
++	return *p;
++#else
++	uint8_t *u_p = (uint8_t *)p;
++	return (u_p[1] | (u_p[0] << 8));
++#endif
++}
++
++
++/* Registers */
++
++uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_4(io->iot, io->ioh, ior);
++}
++
++#if 0
++uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	return bus_space_read_8(io->iot, io->ioh, ior);
++}
++#endif
++
++void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior, value);
++}
++
++#if 0
++void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior, value);
++}
++#endif
++
++void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask,
++		      uint32_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_4(io->iot, io->ioh, ior,
++			  (bus_space_read_4(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++
++#if 0
++void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask,
++		      uint64_t set_mask)
++{
++	dwc_ioctx_t *io = (dwc_ioctx_t *)io_ctx;
++	bus_size_t ior = (bus_size_t)reg;
++
++	bus_space_write_8(io->iot, io->ioh, ior,
++			  (bus_space_read_8(io->iot, io->ioh, ior) &
++			   ~clear_mask) | set_mask);
++}
++#endif
++
++
++/* Locking */
++
++dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void)
++{
++	struct simplelock *sl = DWC_ALLOC(sizeof(*sl));
++
++	if (!sl) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		return NULL;
++	}
++
++	simple_lock_init(sl);
++	return (dwc_spinlock_t *)sl;
++}
++
++void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock)
++{
++	struct simplelock *sl = (struct simplelock *)lock;
++
++	DWC_FREE(sl);
++}
++
++void DWC_SPINLOCK(dwc_spinlock_t *lock)
++{
++	simple_lock((struct simplelock *)lock);
++}
++
++void DWC_SPINUNLOCK(dwc_spinlock_t *lock)
++{
++	simple_unlock((struct simplelock *)lock);
++}
++
++void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags)
++{
++	simple_lock((struct simplelock *)lock);
++	*flags = splbio();
++}
++
++void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags)
++{
++	splx(flags);
++	simple_unlock((struct simplelock *)lock);
++}
++
++dwc_mutex_t *DWC_MUTEX_ALLOC(void)
++{
++	dwc_mutex_t *mutex = DWC_ALLOC(sizeof(struct lock));
++
++	if (!mutex) {
++		DWC_ERROR("Cannot allocate memory for mutex");
++		return NULL;
++	}
++
++	lockinit((struct lock *)mutex, 0, "dw3mtx", 0, 0);
++	return mutex;
++}
++
++#if (defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES))
++#else
++void DWC_MUTEX_FREE(dwc_mutex_t *mutex)
++{
++	DWC_FREE(mutex);
++}
++#endif
++
++void DWC_MUTEX_LOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_EXCLUSIVE, NULL);
++}
++
++int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex)
++{
++	int status;
++
++	status = lockmgr((struct lock *)mutex, LK_EXCLUSIVE | LK_NOWAIT, NULL);
++	return status == 0;
++}
++
++void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex)
++{
++	lockmgr((struct lock *)mutex, LK_RELEASE, NULL);
++}
++
++
++/* Timing */
++
++void DWC_UDELAY(uint32_t usecs)
++{
++	DELAY(usecs);
++}
++
++void DWC_MDELAY(uint32_t msecs)
++{
++	do {
++		DELAY(1000);
++	} while (--msecs);
++}
++
++void DWC_MSLEEP(uint32_t msecs)
++{
++	struct timeval tv;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++	tsleep(&tv, 0, "dw3slp", tvtohz(&tv));
++}
++
++uint32_t DWC_TIME(void)
++{
++	struct timeval tv;
++
++	microuptime(&tv);	// or getmicrouptime? (less precise, but faster)
++	return tv.tv_sec * 1000 + tv.tv_usec / 1000;
++}
++
++
++/* Timers */
++
++struct dwc_timer {
++	struct callout t;
++	char *name;
++	dwc_spinlock_t *lock;
++	dwc_timer_callback_t cb;
++	void *data;
++};
++
++dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data)
++{
++	dwc_timer_t *t = DWC_ALLOC(sizeof(*t));
++
++	if (!t) {
++		DWC_ERROR("Cannot allocate memory for timer");
++		return NULL;
++	}
++
++	callout_init(&t->t);
++
++	t->name = DWC_STRDUP(name);
++	if (!t->name) {
++		DWC_ERROR("Cannot allocate memory for timer->name");
++		goto no_name;
++	}
++
++	t->lock = DWC_SPINLOCK_ALLOC();
++	if (!t->lock) {
++		DWC_ERROR("Cannot allocate memory for timer->lock");
++		goto no_lock;
++	}
++
++	t->cb = cb;
++	t->data = data;
++
++	return t;
++
++ no_lock:
++	DWC_FREE(t->name);
++ no_name:
++	DWC_FREE(t);
++
++	return NULL;
++}
++
++void DWC_TIMER_FREE(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++	DWC_SPINLOCK_FREE(timer->lock);
++	DWC_FREE(timer->name);
++	DWC_FREE(timer);
++}
++
++void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time)
++{
++	struct timeval tv;
++
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	callout_reset(&timer->t, tvtohz(&tv), timer->cb, timer->data);
++}
++
++void DWC_TIMER_CANCEL(dwc_timer_t *timer)
++{
++	callout_stop(&timer->t);
++}
++
++
++/* Wait Queues */
++
++struct dwc_waitq {
++	struct simplelock lock;
++	int abort;
++};
++
++dwc_waitq_t *DWC_WAITQ_ALLOC(void)
++{
++	dwc_waitq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		return NULL;
++	}
++
++	simple_lock_init(&wq->lock);
++	wq->abort = 0;
++
++	return wq;
++}
++
++void DWC_WAITQ_FREE(dwc_waitq_t *wq)
++{
++	DWC_FREE(wq);
++}
++
++int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data)
++{
++	int ipl;
++	int result = 0;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		result = ltsleep(wq, PCATCH, "dw3wat", 0, &wq->lock); // infinite timeout
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			result = -DWC_E_ABORT;
++		} else {
++			result = 0;
++		}
++
++		splx(ipl);
++		simple_unlock(&wq->lock);
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++		} else {			// signaled - must be EINTR
++			result = -DWC_E_ABORT;
++		}
++	}
++
++	return result;
++}
++
++int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++			       void *data, int32_t msecs)
++{
++	struct timeval tv, tv1, tv2;
++	int ipl;
++	int result = 0;
++
++	tv.tv_sec = msecs / 1000;
++	tv.tv_usec = (msecs - tv.tv_sec * 1000) * 1000;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++
++	/* Skip the sleep if already aborted or triggered */
++	if (!wq->abort && !cond(data)) {
++		splx(ipl);
++		getmicrouptime(&tv1);
++		result = ltsleep(wq, PCATCH, "dw3wto", tvtohz(&tv), &wq->lock);
++		getmicrouptime(&tv2);
++		ipl = splbio();
++	}
++
++	if (result == 0) {			// awoken
++		if (wq->abort) {
++			wq->abort = 0;
++			splx(ipl);
++			simple_unlock(&wq->lock);
++			result = -DWC_E_ABORT;
++		} else {
++			splx(ipl);
++			simple_unlock(&wq->lock);
++
++			tv2.tv_usec -= tv1.tv_usec;
++			if (tv2.tv_usec < 0) {
++				tv2.tv_usec += 1000000;
++				tv2.tv_sec--;
++			}
++
++			tv2.tv_sec -= tv1.tv_sec;
++			result = tv2.tv_sec * 1000 + tv2.tv_usec / 1000;
++			result = msecs - result;
++			if (result <= 0)
++				result = 1;
++		}
++	} else {
++		wq->abort = 0;
++		splx(ipl);
++		simple_unlock(&wq->lock);
++
++		if (result == ERESTART) {	// signaled - restart
++			result = -DWC_E_RESTART;
++
++		} else if (result == EINTR) {		// signaled - interrupt
++			result = -DWC_E_ABORT;
++
++		} else {				// timed out
++			result = -DWC_E_TIMEOUT;
++		}
++	}
++
++	return result;
++}
++
++void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq)
++{
++	wakeup(wq);
++}
++
++void DWC_WAITQ_ABORT(dwc_waitq_t *wq)
++{
++	int ipl;
++
++	simple_lock(&wq->lock);
++	ipl = splbio();
++	wq->abort = 1;
++	wakeup(wq);
++	splx(ipl);
++	simple_unlock(&wq->lock);
++}
++
++
++/* Threading */
++
++struct dwc_thread {
++	struct proc *proc;
++	int abort;
++};
++
++dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data)
++{
++	int retval;
++	dwc_thread_t *thread = DWC_ALLOC(sizeof(*thread));
++
++	if (!thread) {
++		return NULL;
++	}
++
++	thread->abort = 0;
++	retval = kthread_create1((void (*)(void *))func, data, &thread->proc,
++				 "%s", name);
++	if (retval) {
++		DWC_FREE(thread);
++		return NULL;
++	}
++
++	return thread;
++}
++
++int DWC_THREAD_STOP(dwc_thread_t *thread)
++{
++	int retval;
++
++	thread->abort = 1;
++	retval = tsleep(&thread->abort, 0, "dw3stp", 60 * hz);
++
++	if (retval == 0) {
++		/* DWC_THREAD_EXIT() will free the thread struct */
++		return 0;
++	}
++
++	/* NOTE: We leak the thread struct if thread doesn't die */
++
++	if (retval == EWOULDBLOCK) {
++		return -DWC_E_TIMEOUT;
++	}
++
++	return -DWC_E_UNKNOWN;
++}
++
++dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread)
++{
++	return thread->abort;
++}
++
++void DWC_THREAD_EXIT(dwc_thread_t *thread)
++{
++	wakeup(&thread->abort);
++	DWC_FREE(thread);
++	kthread_exit(0);
++}
++
++/* tasklets
++ - Runs in interrupt context (cannot sleep)
++ - Each tasklet runs on a single CPU
++ - Different tasklets can be running simultaneously on different CPUs
++ [ On NetBSD there is no corresponding mechanism, drivers don't have bottom-
++   halves. So we just call the callback directly from DWC_TASK_SCHEDULE() ]
++ */
++struct dwc_tasklet {
++	dwc_tasklet_callback_t cb;
++	void *data;
++};
++
++static void tasklet_callback(void *data)
++{
++	dwc_tasklet_t *task = (dwc_tasklet_t *)data;
++
++	task->cb(task->data);
++}
++
++dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data)
++{
++	dwc_tasklet_t *task = DWC_ALLOC(sizeof(*task));
++
++	if (task) {
++		task->cb = cb;
++		task->data = data;
++	} else {
++		DWC_ERROR("Cannot allocate memory for tasklet");
++	}
++
++	return task;
++}
++
++void DWC_TASK_FREE(dwc_tasklet_t *task)
++{
++	DWC_FREE(task);
++}
++
++void DWC_TASK_SCHEDULE(dwc_tasklet_t *task)
++{
++	tasklet_callback(task);
++}
++
++
++/* workqueues
++ - Runs in process context (can sleep)
++ */
++typedef struct work_container {
++	dwc_work_callback_t cb;
++	void *data;
++	dwc_workq_t *wq;
++	char *name;
++	int hz;
++	struct work task;
++} work_container_t;
++
++struct dwc_workq {
++	struct workqueue *taskq;
++	dwc_spinlock_t *lock;
++	dwc_waitq_t *waitq;
++	int pending;
++	struct work_container *container;
++};
++
++static void do_work(struct work *task, void *data)
++{
++	dwc_workq_t *wq = (dwc_workq_t *)data;
++	work_container_t *container = wq->container;
++	dwc_irqflags_t flags;
++
++	if (container->hz) {
++		tsleep(container, 0, "dw3wrk", container->hz);
++	}
++
++	container->cb(container->data);
++	DWC_DEBUG("Work done: %s, container=%p", container->name, container);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	if (container->name)
++		DWC_FREE(container->name);
++	DWC_FREE(container);
++	wq->pending--;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++}
++
++static int work_done(void *data)
++{
++	dwc_workq_t *workq = (dwc_workq_t *)data;
++
++	return workq->pending == 0;
++}
++
++int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout)
++{
++	return DWC_WAITQ_WAIT_TIMEOUT(workq->waitq, work_done, workq, timeout);
++}
++
++dwc_workq_t *DWC_WORKQ_ALLOC(char *name)
++{
++	int result;
++	dwc_workq_t *wq = DWC_ALLOC(sizeof(*wq));
++
++	if (!wq) {
++		DWC_ERROR("Cannot allocate memory for workqueue");
++		return NULL;
++	}
++
++	result = workqueue_create(&wq->taskq, name, do_work, wq, 0 /*PWAIT*/,
++				  IPL_BIO, 0);
++	if (result) {
++		DWC_ERROR("Cannot create workqueue");
++		goto no_taskq;
++	}
++
++	wq->pending = 0;
++
++	wq->lock = DWC_SPINLOCK_ALLOC();
++	if (!wq->lock) {
++		DWC_ERROR("Cannot allocate memory for spinlock");
++		goto no_lock;
++	}
++
++	wq->waitq = DWC_WAITQ_ALLOC();
++	if (!wq->waitq) {
++		DWC_ERROR("Cannot allocate memory for waitqueue");
++		goto no_waitq;
++	}
++
++	return wq;
++
++ no_waitq:
++	DWC_SPINLOCK_FREE(wq->lock);
++ no_lock:
++	workqueue_destroy(wq->taskq);
++ no_taskq:
++	DWC_FREE(wq);
++
++	return NULL;
++}
++
++void DWC_WORKQ_FREE(dwc_workq_t *wq)
++{
++#ifdef DEBUG
++	dwc_irqflags_t flags;
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++
++	if (wq->pending != 0) {
++		struct work_container *container = wq->container;
++
++		DWC_ERROR("Destroying work queue with pending work");
++
++		if (container && container->name) {
++			DWC_ERROR("Work %s still pending", container->name);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++#endif
++	DWC_WAITQ_FREE(wq->waitq);
++	DWC_SPINLOCK_FREE(wq->lock);
++	workqueue_destroy(wq->taskq);
++	DWC_FREE(wq);
++}
++
++void DWC_WORKQ_SCHEDULE(dwc_workq_t *wq, dwc_work_callback_t cb, void *data,
++			char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	container->hz = 0;
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *wq, dwc_work_callback_t cb,
++				void *data, uint32_t time, char *format, ...)
++{
++	dwc_irqflags_t flags;
++	work_container_t *container;
++	static char name[128];
++	struct timeval tv;
++	va_list args;
++
++	va_start(args, format);
++	DWC_VSNPRINTF(name, 128, format, args);
++	va_end(args);
++
++	DWC_SPINLOCK_IRQSAVE(wq->lock, &flags);
++	wq->pending++;
++	DWC_SPINUNLOCK_IRQRESTORE(wq->lock, flags);
++	DWC_WAITQ_TRIGGER(wq->waitq);
++
++	container = DWC_ALLOC_ATOMIC(sizeof(*container));
++	if (!container) {
++		DWC_ERROR("Cannot allocate memory for container");
++		return;
++	}
++
++	container->name = DWC_STRDUP(name);
++	if (!container->name) {
++		DWC_ERROR("Cannot allocate memory for container->name");
++		DWC_FREE(container);
++		return;
++	}
++
++	container->cb = cb;
++	container->data = data;
++	container->wq = wq;
++	tv.tv_sec = time / 1000;
++	tv.tv_usec = (time - tv.tv_sec * 1000) * 1000;
++	container->hz = tvtohz(&tv);
++	wq->container = container;
++
++	DWC_DEBUG("Queueing work: %s, container=%p", container->name, container);
++	workqueue_enqueue(wq->taskq, &container->task);
++}
++
++int DWC_WORKQ_PENDING(dwc_workq_t *wq)
++{
++	return wq->pending;
++}
+diff --git a/drivers/usb/host/dwc_common_port/dwc_crypto.c b/drivers/usb/host/dwc_common_port/dwc_crypto.c
+new file mode 100644
+index 0000000..3b03532
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.c
+@@ -0,0 +1,308 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.c $
++ * $Revision: #5 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++/** @file
++ * This file contains the WUSB cryptographic routines.
++ */
++
++#ifdef DWC_CRYPTOLIB
++
++#include "dwc_crypto.h"
++#include "usb.h"
++
++#ifdef DEBUG
++static inline void dump_bytes(char *name, uint8_t *bytes, int len)
++{
++	int i;
++	DWC_PRINTF("%s: ", name);
++	for (i=0; i<len; i++) {
++		DWC_PRINTF("%02x ", bytes[i]);
++	}
++	DWC_PRINTF("\n");
++}
++#else
++#define dump_bytes(x...)
++#endif
++
++/* Display a block */
++void show_block(const u8 *blk, const char *prefix, const char *suffix, int a)
++{
++#ifdef DWC_DEBUG_CRYPTO
++	int i, blksize = 16;
++
++	DWC_DEBUG("%s", prefix);
++
++	if (suffix == NULL) {
++		suffix = "\n";
++		blksize = a;
++	}
++
++	for (i = 0; i < blksize; i++)
++		DWC_PRINT("%02x%s", *blk++, ((i & 3) == 3) ? "  " : " ");
++	DWC_PRINT(suffix);
++#endif
++}
++
++/**
++ * Encrypts an array of bytes using the AES encryption engine.
++ * If <code>dst</code> == <code>src</code>, then the bytes will be encrypted
++ * in-place.
++ *
++ * @return  0 on success, negative error code on error.
++ */
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst)
++{
++	u8 block_t[16];
++	DWC_MEMSET(block_t, 0, 16);
++
++	return DWC_AES_CBC(src, 16, key, 16, block_t, dst);
++}
++
++/**
++ * The CCM-MAC-FUNCTION described in section 6.5 of the WUSB spec.
++ * This function takes a data string and returns the encrypted CBC
++ * Counter-mode MIC.
++ *
++ * @param key     The 128-bit symmetric key.
++ * @param nonce   The CCM nonce.
++ * @param label   The unique 14-byte ASCII text label.
++ * @param bytes   The byte array to be encrypted.
++ * @param len     Length of the byte array.
++ * @param result  Byte array to receive the 8-byte encrypted MIC.
++ */
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result)
++{
++	u8 block_m[16];
++	u8 block_x[16];
++	u8 block_t[8];
++	int idx, blkNum;
++	u16 la = (u16)(len + 14);
++
++	/* Set the AES-128 key */
++	//dwc_aes_setkey(tfm, key, 16);
++
++	/* Fill block B0 from flags = 0x59, N, and l(m) = 0 */
++	block_m[0] = 0x59;
++	for (idx = 0; idx < 13; idx++)
++		block_m[idx + 1] = nonce[idx];
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Produce the CBC IV */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_m, "CBC IV in: ", "\n", 0);
++	show_block(block_x, "CBC IV out:", "\n", 0);
++
++	/* Fill block B1 from l(a) = Blen + 14, and A */
++	block_x[0] ^= (u8)(la >> 8);
++	block_x[1] ^= (u8)la;
++	for (idx = 0; idx < 14; idx++)
++		block_x[idx + 2] ^= label[idx];
++	show_block(block_x, "After xor: ", "b1\n", 16);
++
++	dwc_wusb_aes_encrypt(block_x, key, block_x);
++	show_block(block_x, "After AES: ", "b1\n", 16);
++
++	idx = 0;
++	blkNum = 0;
++
++	/* Fill remaining blocks with B */
++	while (len-- > 0) {
++		block_x[idx] ^= *bytes++;
++		if (++idx >= 16) {
++			idx = 0;
++			show_block(block_x, "After xor: ", "\n", blkNum);
++			dwc_wusb_aes_encrypt(block_x, key, block_x);
++			show_block(block_x, "After AES: ", "\n", blkNum);
++			blkNum++;
++		}
++	}
++
++	/* Handle partial last block */
++	if (idx > 0) {
++		show_block(block_x, "After xor: ", "\n", blkNum);
++		dwc_wusb_aes_encrypt(block_x, key, block_x);
++		show_block(block_x, "After AES: ", "\n", blkNum);
++	}
++
++	/* Save the MIC tag */
++	DWC_MEMCPY(block_t, block_x, 8);
++	show_block(block_t, "MIC tag  : ", NULL, 8);
++
++	/* Fill block A0 from flags = 0x01, N, and counter = 0 */
++	block_m[0] = 0x01;
++	block_m[14] = 0;
++	block_m[15] = 0;
++
++	/* Encrypt the counter */
++	dwc_wusb_aes_encrypt(block_m, key, block_x);
++	show_block(block_x, "CTR[MIC] : ", NULL, 8);
++
++	/* XOR with MIC tag */
++	for (idx = 0; idx < 8; idx++) {
++		block_t[idx] ^= block_x[idx];
++	}
++
++	/* Return result to caller */
++	DWC_MEMCPY(result, block_t, 8);
++	show_block(result, "CCM-MIC  : ", NULL, 8);
++
++}
++
++/**
++ * The PRF function described in section 6.5 of the WUSB spec. This function
++ * concatenates MIC values returned from dwc_cmf() to create a value of
++ * the requested length.
++ *
++ * @param prf_len  Length of the PRF function in bits (64, 128, or 256).
++ * @param key, nonce, label, bytes, len  Same as for dwc_cmf().
++ * @param result   Byte array to receive the result.
++ */
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result)
++{
++	int i;
++
++	nonce[0] = 0;
++	for (i = 0; i < prf_len >> 6; i++, nonce[0]++) {
++		dwc_wusb_cmf(key, nonce, label, bytes, len, result);
++		result += 8;
++	}
++}
++
++/**
++ * Fills in CCM Nonce per the WUSB spec.
++ *
++ * @param[in] haddr Host address.
++ * @param[in] daddr Device address.
++ * @param[in] tkid Session Key(PTK) identifier.
++ * @param[out] nonce Pointer to where the CCM Nonce output is to be written.
++ */
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			     uint8_t *nonce)
++{
++
++	DWC_DEBUG("%s %x %x\n", __func__, daddr, haddr);
++
++	DWC_MEMSET(&nonce[0], 0, 16);
++
++	DWC_MEMCPY(&nonce[6], tkid, 3);
++	nonce[9] = daddr & 0xFF;
++	nonce[10] = (daddr >> 8) & 0xFF;
++	nonce[11] = haddr & 0xFF;
++	nonce[12] = (haddr >> 8) & 0xFF;
++
++	dump_bytes("CCM nonce", nonce, 16);
++}
++
++/**
++ * Generates a 16-byte cryptographic-grade random number for the Host/Device
++ * Nonce.
++ */
++void dwc_wusb_gen_nonce(uint16_t addr, uint8_t *nonce)
++{
++	uint8_t inonce[16];
++	uint32_t temp[4];
++
++	/* Fill in the Nonce */
++	DWC_MEMSET(&inonce[0], 0, sizeof(inonce));
++	inonce[9] = addr & 0xFF;
++	inonce[10] = (addr >> 8) & 0xFF;
++	inonce[11] = inonce[9];
++	inonce[12] = inonce[10];
++
++	/* Collect "randomness samples" */
++	DWC_RANDOM_BYTES((uint8_t *)temp, 16);
++
++	dwc_wusb_prf_128((uint8_t *)temp, nonce,
++			 "Random Numbers", (uint8_t *)temp, sizeof(temp),
++			 nonce);
++}
++
++/**
++ * Generates the Session Key (PTK) and Key Confirmation Key (KCK) per the
++ * WUSB spec.
++ *
++ * @param[in] ccm_nonce Pointer to CCM Nonce.
++ * @param[in] mk Master Key to derive the session from
++ * @param[in] hnonce Pointer to Host Nonce.
++ * @param[in] dnonce Pointer to Device Nonce.
++ * @param[out] kck Pointer to where the KCK output is to be written.
++ * @param[out] ptk Pointer to where the PTK output is to be written.
++ */
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk, uint8_t *hnonce,
++		      uint8_t *dnonce, uint8_t *kck, uint8_t *ptk)
++{
++	uint8_t idata[32];
++	uint8_t odata[32];
++
++	dump_bytes("ck", mk, 16);
++	dump_bytes("hnonce", hnonce, 16);
++	dump_bytes("dnonce", dnonce, 16);
++
++	/* The data is the HNonce and DNonce concatenated */
++	DWC_MEMCPY(&idata[0], hnonce, 16);
++	DWC_MEMCPY(&idata[16], dnonce, 16);
++
++	dwc_wusb_prf_256(mk, ccm_nonce, "Pair-wise keys", idata, 32, odata);
++
++	/* Low 16 bytes of the result is the KCK, high 16 is the PTK */
++	DWC_MEMCPY(kck, &odata[0], 16);
++	DWC_MEMCPY(ptk, &odata[16], 16);
++
++	dump_bytes("kck", kck, 16);
++	dump_bytes("ptk", ptk, 16);
++}
++
++/**
++ * Generates the Message Integrity Code over the Handshake data per the
++ * WUSB spec.
++ *
++ * @param ccm_nonce Pointer to CCM Nonce.
++ * @param kck   Pointer to Key Confirmation Key.
++ * @param data  Pointer to Handshake data to be checked.
++ * @param mic   Pointer to where the MIC output is to be written.
++ */
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t *kck,
++		      uint8_t *data, uint8_t *mic)
++{
++
++	dwc_wusb_prf_64(kck, ccm_nonce, "out-of-bandMIC",
++			data, WUSB_HANDSHAKE_LEN_FOR_MIC, mic);
++}
++
++#endif	/* DWC_CRYPTOLIB */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_crypto.h b/drivers/usb/host/dwc_common_port/dwc_crypto.h
+new file mode 100644
+index 0000000..26fcddc
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_crypto.h
+@@ -0,0 +1,111 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_crypto.h $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++
++#ifndef _DWC_CRYPTO_H_
++#define _DWC_CRYPTO_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file contains declarations for the WUSB Cryptographic routines as
++ * defined in the WUSB spec.  They are only to be used internally by the DWC UWB
++ * modules.
++ */
++
++#include "dwc_os.h"
++
++int dwc_wusb_aes_encrypt(u8 *src, u8 *key, u8 *dst);
++
++void dwc_wusb_cmf(u8 *key, u8 *nonce,
++		  char *label, u8 *bytes, int len, u8 *result);
++void dwc_wusb_prf(int prf_len, u8 *key,
++		  u8 *nonce, char *label, u8 *bytes, int len, u8 *result);
++
++/**
++ * The PRF-64 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_64(u8 *key, u8 *nonce,
++				   char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(64, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-128 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_128(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(128, key, nonce, label, bytes, len, result);
++}
++
++/**
++ * The PRF-256 function described in section 6.5 of the WUSB spec.
++ *
++ * @param key, nonce, label, bytes, len, result  Same as for dwc_prf().
++ */
++static inline void dwc_wusb_prf_256(u8 *key, u8 *nonce,
++				    char *label, u8 *bytes, int len, u8 *result)
++{
++	dwc_wusb_prf(256, key, nonce, label, bytes, len, result);
++}
++
++
++void dwc_wusb_fill_ccm_nonce(uint16_t haddr, uint16_t daddr, uint8_t *tkid,
++			       uint8_t *nonce);
++void dwc_wusb_gen_nonce(uint16_t addr,
++			  uint8_t *nonce);
++
++void dwc_wusb_gen_key(uint8_t *ccm_nonce, uint8_t *mk,
++			uint8_t *hnonce, uint8_t *dnonce,
++			uint8_t *kck, uint8_t *ptk);
++
++
++void dwc_wusb_gen_mic(uint8_t *ccm_nonce, uint8_t
++			*kck, uint8_t *data, uint8_t *mic);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_CRYPTO_H_ */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_dh.c b/drivers/usb/host/dwc_common_port/dwc_dh.c
+new file mode 100644
+index 0000000..2b429a3
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_dh.c
+@@ -0,0 +1,291 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.c $
++ * $Revision: #3 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_dh.h"
++#include "dwc_modpow.h"
++
++#ifdef DEBUG
++/* This function prints out a buffer in the format described in the Association
++ * Model specification. */
++static void dh_dump(char *str, void *_num, int len)
++{
++	uint8_t *num = _num;
++	int i;
++	DWC_PRINTF("%s\n", str);
++	for (i = 0; i < len; i ++) {
++		DWC_PRINTF("%02x", num[i]);
++		if (((i + 1) % 2) == 0) DWC_PRINTF(" ");
++		if (((i + 1) % 26) == 0) DWC_PRINTF("\n");
++	}
++
++	DWC_PRINTF("\n");
++}
++#else
++#define dh_dump(_x...) do {; } while(0)
++#endif
++
++/* Constant g value */
++static __u32 dh_g[] = {
++	0x02000000,
++};
++
++/* Constant p value */
++static __u32 dh_p[] = {
++	0xFFFFFFFF, 0xFFFFFFFF, 0xA2DA0FC9, 0x34C26821, 0x8B62C6C4, 0xD11CDC80, 0x084E0229, 0x74CC678A,
++	0xA6BE0B02, 0x229B133B, 0x79084A51, 0xDD04348E, 0xB31995EF, 0x1B433ACD, 0x6D0A2B30, 0x37145FF2,
++	0x6D35E14F, 0x45C2516D, 0x76B585E4, 0xC67E5E62, 0xE9424CF4, 0x6BED37A6, 0xB65CFF0B, 0xEDB706F4,
++	0xFB6B38EE, 0xA59F895A, 0x11249FAE, 0xE61F4B7C, 0x51662849, 0x3D5BE4EC, 0xB87C00C2, 0x05BF63A1,
++	0x3648DA98, 0x9AD3551C, 0xA83F1669, 0x5FCF24FD, 0x235D6583, 0x96ADA3DC, 0x56F3621C, 0xBB528520,
++	0x0729D59E, 0x6D969670, 0x4E350C67, 0x0498BC4A, 0x086C74F1, 0x7C2118CA, 0x465E9032, 0x3BCE362E,
++	0x2C779EE3, 0x03860E18, 0xA283279B, 0x8FA207EC, 0xF05DC5B5, 0xC9524C6F, 0xF6CB2BDE, 0x18175895,
++	0x7C499539, 0xE56A95EA, 0x1826D215, 0x1005FA98, 0x5A8E7215, 0x2DC4AA8A, 0x0D1733AD, 0x337A5004,
++	0xAB2155A8, 0x64BA1CDF, 0x0485FBEC, 0x0AEFDB58, 0x5771EA8A, 0x7D0C065D, 0x850F97B3, 0xC7E4E1A6,
++	0x8CAEF5AB, 0xD73309DB, 0xE0948C1E, 0x9D61254A, 0x26D2E3CE, 0x6BEED21A, 0x06FA2FF1, 0x64088AD9,
++	0x730276D8, 0x646AC83E, 0x182B1F52, 0x0C207B17, 0x5717E1BB, 0x6C5D617A, 0xC0880977, 0xE246D9BA,
++	0xA04FE208, 0x31ABE574, 0xFC5BDB43, 0x8E10FDE0, 0x20D1824B, 0xCAD23AA9, 0xFFFFFFFF, 0xFFFFFFFF,
++};
++
++static void dh_swap_bytes(void *_in, void *_out, uint32_t len)
++{
++	uint8_t *in = _in;
++	uint8_t *out = _out;
++	int i;
++	for (i=0; i<len; i++) {
++		out[i] = in[len-1-i];
++	}
++}
++
++/* Computes the modular exponentiation (num^exp % mod).  num, exp, and mod are
++ * big endian numbers of size len, in bytes.  Each len value must be a multiple
++ * of 4. */
++int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++		  void *exp, uint32_t exp_len,
++		  void *mod, uint32_t mod_len,
++		  void *out)
++{
++	/* modpow() takes little endian numbers.  AM uses big-endian.  This
++	 * function swaps bytes of numbers before passing onto modpow. */
++
++	int retval = 0;
++	uint32_t *result;
++
++	uint32_t *bignum_num = dwc_alloc(mem_ctx, num_len + 4);
++	uint32_t *bignum_exp = dwc_alloc(mem_ctx, exp_len + 4);
++	uint32_t *bignum_mod = dwc_alloc(mem_ctx, mod_len + 4);
++
++	dh_swap_bytes(num, &bignum_num[1], num_len);
++	bignum_num[0] = num_len / 4;
++
++	dh_swap_bytes(exp, &bignum_exp[1], exp_len);
++	bignum_exp[0] = exp_len / 4;
++
++	dh_swap_bytes(mod, &bignum_mod[1], mod_len);
++	bignum_mod[0] = mod_len / 4;
++
++	result = dwc_modpow(mem_ctx, bignum_num, bignum_exp, bignum_mod);
++	if (!result) {
++		retval = -1;
++		goto dh_modpow_nomem;
++	}
++
++	dh_swap_bytes(&result[1], out, result[0] * 4);
++	dwc_free(mem_ctx, result);
++
++ dh_modpow_nomem:
++	dwc_free(mem_ctx, bignum_num);
++	dwc_free(mem_ctx, bignum_exp);
++	dwc_free(mem_ctx, bignum_mod);
++	return retval;
++}
++
++
++int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pk, uint8_t *hash)
++{
++	int retval;
++	uint8_t m3[385];
++
++#ifndef DH_TEST_VECTORS
++	DWC_RANDOM_BYTES(exp, 32);
++#endif
++
++	/* Compute the pkd */
++	if ((retval = dwc_dh_modpow(mem_ctx, dh_g, 4,
++				    exp, 32,
++				    dh_p, 384, pk))) {
++		return retval;
++	}
++
++	m3[384] = nd;
++	DWC_MEMCPY(&m3[0], pk, 384);
++	DWC_SHA256(m3, 385, hash);
++
++	dh_dump("PK", pk, 384);
++	dh_dump("SHA-256(M3)", hash, 32);
++	return 0;
++}
++
++int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++		       uint8_t *exp, int is_host,
++		       char *dd, uint8_t *ck, uint8_t *kdk)
++{
++	int retval;
++	uint8_t mv[784];
++	uint8_t sha_result[32];
++	uint8_t dhkey[384];
++	uint8_t shared_secret[384];
++	char *message;
++	uint32_t vd;
++
++	uint8_t *pk;
++
++	if (is_host) {
++		pk = pkd;
++	}
++	else {
++		pk = pkh;
++	}
++
++	if ((retval = dwc_dh_modpow(mem_ctx, pk, 384,
++				    exp, 32,
++				    dh_p, 384, shared_secret))) {
++		return retval;
++	}
++	dh_dump("Shared Secret", shared_secret, 384);
++
++	DWC_SHA256(shared_secret, 384, dhkey);
++	dh_dump("DHKEY", dhkey, 384);
++
++	DWC_MEMCPY(&mv[0], pkd, 384);
++	DWC_MEMCPY(&mv[384], pkh, 384);
++	DWC_MEMCPY(&mv[768], "displayed digest", 16);
++	dh_dump("MV", mv, 784);
++
++	DWC_SHA256(mv, 784, sha_result);
++	dh_dump("SHA-256(MV)", sha_result, 32);
++	dh_dump("First 32-bits of SHA-256(MV)", sha_result, 4);
++
++	dh_swap_bytes(sha_result, &vd, 4);
++#ifdef DEBUG
++	DWC_PRINTF("Vd (decimal) = %d\n", vd);
++#endif
++
++	switch (nd) {
++	case 2:
++		vd = vd % 100;
++		DWC_SPRINTF(dd, "%02d", vd);
++		break;
++	case 3:
++		vd = vd % 1000;
++		DWC_SPRINTF(dd, "%03d", vd);
++		break;
++	case 4:
++		vd = vd % 10000;
++		DWC_SPRINTF(dd, "%04d", vd);
++		break;
++	}
++#ifdef DEBUG
++	DWC_PRINTF("Display Digits: %s\n", dd);
++#endif
++
++	message = "connection key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++	dh_dump("HMAC(SHA-256, DHKey, connection key)", sha_result, 32);
++	DWC_MEMCPY(ck, sha_result, 16);
++
++	message = "key derivation key";
++	DWC_HMAC_SHA256(message, DWC_STRLEN(message), dhkey, 32, sha_result);
++	dh_dump("HMAC(SHA-256, DHKey, key derivation key)", sha_result, 32);
++	DWC_MEMCPY(kdk, sha_result, 32);
++
++	return 0;
++}
++
++
++#ifdef DH_TEST_VECTORS
++
++static __u8 dh_a[] = {
++	0x44, 0x00, 0x51, 0xd6,
++	0xf0, 0xb5, 0x5e, 0xa9,
++	0x67, 0xab, 0x31, 0xc6,
++	0x8a, 0x8b, 0x5e, 0x37,
++	0xd9, 0x10, 0xda, 0xe0,
++	0xe2, 0xd4, 0x59, 0xa4,
++	0x86, 0x45, 0x9c, 0xaa,
++	0xdf, 0x36, 0x75, 0x16,
++};
++
++static __u8 dh_b[] = {
++	0x5d, 0xae, 0xc7, 0x86,
++	0x79, 0x80, 0xa3, 0x24,
++	0x8c, 0xe3, 0x57, 0x8f,
++	0xc7, 0x5f, 0x1b, 0x0f,
++	0x2d, 0xf8, 0x9d, 0x30,
++	0x6f, 0xa4, 0x52, 0xcd,
++	0xe0, 0x7a, 0x04, 0x8a,
++	0xde, 0xd9, 0x26, 0x56,
++};
++
++void dwc_run_dh_test_vectors(void *mem_ctx)
++{
++	uint8_t pkd[384];
++	uint8_t pkh[384];
++	uint8_t hashd[32];
++	uint8_t hashh[32];
++	uint8_t ck[16];
++	uint8_t kdk[32];
++	char dd[5];
++
++	DWC_PRINTF("\n\n\nDH_TEST_VECTORS\n\n");
++
++	/* compute the PKd and SHA-256(PKd || Nd) */
++	DWC_PRINTF("Computing PKd\n");
++	dwc_dh_pk(mem_ctx, 2, dh_a, pkd, hashd);
++
++	/* compute the PKd and SHA-256(PKh || Nd) */
++	DWC_PRINTF("Computing PKh\n");
++	dwc_dh_pk(mem_ctx, 2, dh_b, pkh, hashh);
++
++	/* compute the dhkey */
++	dwc_dh_derive_keys(mem_ctx, 2, pkh, pkd, dh_a, 0, dd, ck, kdk);
++}
++#endif /* DH_TEST_VECTORS */
++
++#endif /* !CONFIG_MACH_IPMATE */
++
++#endif /* DWC_CRYPTOLIB */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_dh.h b/drivers/usb/host/dwc_common_port/dwc_dh.h
+new file mode 100644
+index 0000000..25c1cc0
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_dh.h
+@@ -0,0 +1,106 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_dh.h $
++ * $Revision: #4 $
++ * $Date: 2010/09/28 $
++ * $Change: 1596182 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_DH_H_
++#define _DWC_DH_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the common functions on device and host for performing
++ * numeric association as defined in the WUSB spec.  They are only to be
++ * used internally by the DWC UWB modules. */
++
++extern int dwc_dh_sha256(uint8_t *message, uint32_t len, uint8_t *out);
++extern int dwc_dh_hmac_sha256(uint8_t *message, uint32_t messagelen,
++			      uint8_t *key, uint32_t keylen,
++			      uint8_t *out);
++extern int dwc_dh_modpow(void *mem_ctx, void *num, uint32_t num_len,
++			 void *exp, uint32_t exp_len,
++			 void *mod, uint32_t mod_len,
++			 void *out);
++
++/** Computes PKD or PKH, and SHA-256(PKd || Nd)
++ *
++ * PK = g^exp mod p.
++ *
++ * Input:
++ * Nd = Number of digits on the device.
++ *
++ * Output:
++ * exp = A 32-byte buffer to be filled with a randomly generated number.
++ *       used as either A or B.
++ * pk = A 384-byte buffer to be filled with the PKH or PKD.
++ * hash = A 32-byte buffer to be filled with SHA-256(PK || ND).
++ */
++extern int dwc_dh_pk(void *mem_ctx, uint8_t nd, uint8_t *exp, uint8_t *pkd, uint8_t *hash);
++
++/** Computes the DHKEY, and VD.
++ *
++ * If called from host, then it will comput DHKEY=PKD^exp % p.
++ * If called from device, then it will comput DHKEY=PKH^exp % p.
++ *
++ * Input:
++ * pkd = The PKD value.
++ * pkh = The PKH value.
++ * exp = The A value (if device) or B value (if host) generated in dwc_wudev_dh_pk.
++ * is_host = Set to non zero if a WUSB host is calling this function.
++ *
++ * Output:
++
++ * dd = A pointer to an buffer to be set to the displayed digits string to be shown
++ *      to the user.  This buffer should be at 5 bytes long to hold 4 digits plus a
++ *      null termination character.  This buffer can be used directly for display.
++ * ck = A 16-byte buffer to be filled with the CK.
++ * kdk = A 32-byte buffer to be filled with the KDK.
++ */
++extern int dwc_dh_derive_keys(void *mem_ctx, uint8_t nd, uint8_t *pkh, uint8_t *pkd,
++			      uint8_t *exp, int is_host,
++			      char *dd, uint8_t *ck, uint8_t *kdk);
++
++#ifdef DH_TEST_VECTORS
++extern void dwc_run_dh_test_vectors(void);
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_DH_H_ */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_list.h b/drivers/usb/host/dwc_common_port/dwc_list.h
+new file mode 100644
+index 0000000..89cc325
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_list.h
+@@ -0,0 +1,594 @@
++/*	$OpenBSD: queue.h,v 1.26 2004/05/04 16:59:32 grange Exp $	*/
++/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
++
++/*
++ * Copyright (c) 1991, 1993
++ *	The Regents of the University of California.  All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. Neither the name of the University nor the names of its contributors
++ *    may be used to endorse or promote products derived from this software
++ *    without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
++ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
++ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
++ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
++ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
++ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
++ * SUCH DAMAGE.
++ *
++ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
++ */
++
++#ifndef _DWC_LIST_H_
++#define _DWC_LIST_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * This file defines linked list operations.  It is derived from BSD with
++ * only the MACRO names being prefixed with DWC_.  This is because a few of
++ * these names conflict with those on Linux.  For documentation on use, see the
++ * inline comments in the source code.  The original license for this source
++ * code applies and is preserved in the dwc_list.h source file.
++ */
++
++/*
++ * This file defines five types of data structures: singly-linked lists,
++ * lists, simple queues, tail queues, and circular queues.
++ *
++ *
++ * A singly-linked list is headed by a single forward pointer. The elements
++ * are singly linked for minimum space and pointer manipulation overhead at
++ * the expense of O(n) removal for arbitrary elements. New elements can be
++ * added to the list after an existing element or at the head of the list.
++ * Elements being removed from the head of the list should use the explicit
++ * macro for this purpose for optimum efficiency. A singly-linked list may
++ * only be traversed in the forward direction.  Singly-linked lists are ideal
++ * for applications with large datasets and few or no removals or for
++ * implementing a LIFO queue.
++ *
++ * A list is headed by a single forward pointer (or an array of forward
++ * pointers for a hash table header). The elements are doubly linked
++ * so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before
++ * or after an existing element or at the head of the list. A list
++ * may only be traversed in the forward direction.
++ *
++ * A simple queue is headed by a pair of pointers, one the head of the
++ * list and the other to the tail of the list. The elements are singly
++ * linked to save space, so elements can only be removed from the
++ * head of the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the
++ * list. A simple queue may only be traversed in the forward direction.
++ *
++ * A tail queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or
++ * after an existing element, at the head of the list, or at the end of
++ * the list. A tail queue may be traversed in either direction.
++ *
++ * A circle queue is headed by a pair of pointers, one to the head of the
++ * list and the other to the tail of the list. The elements are doubly
++ * linked so that an arbitrary element can be removed without a need to
++ * traverse the list. New elements can be added to the list before or after
++ * an existing element, at the head of the list, or at the end of the list.
++ * A circle queue may be traversed in either direction, but has a more
++ * complex end of list detection.
++ *
++ * For details on the use of these macros, see the queue(3) manual page.
++ */
++
++/*
++ * Double-linked List.
++ */
++
++typedef struct dwc_list_link {
++	struct dwc_list_link *next;
++	struct dwc_list_link *prev;
++} dwc_list_link_t;
++
++#define DWC_LIST_INIT(link) do {	\
++	(link)->next = (link);		\
++	(link)->prev = (link);		\
++} while (0)
++
++#define DWC_LIST_FIRST(link)	((link)->next)
++#define DWC_LIST_LAST(link)	((link)->prev)
++#define DWC_LIST_END(link)	(link)
++#define DWC_LIST_NEXT(link)	((link)->next)
++#define DWC_LIST_PREV(link)	((link)->prev)
++#define DWC_LIST_EMPTY(link)	\
++	(DWC_LIST_FIRST(link) == DWC_LIST_END(link))
++#define DWC_LIST_ENTRY(link, type, field)			\
++	(type *)((uint8_t *)(link) - (size_t)(&((type *)0)->field))
++
++#if 0
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	(link)->next = (list)->next;				\
++	(link)->prev = (list);					\
++	(list)->next->prev = (link);				\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	(link)->next = (list);					\
++	(link)->prev = (list)->prev;				\
++	(list)->prev->next = (link);				\
++	(list)->prev = (link);					\
++} while (0)
++#else
++#define DWC_LIST_INSERT_HEAD(list, link) do {			\
++	dwc_list_link_t *__next__ = (list)->next;		\
++	__next__->prev = (link);				\
++	(link)->next = __next__;				\
++	(link)->prev = (list);					\
++	(list)->next = (link);					\
++} while (0)
++
++#define DWC_LIST_INSERT_TAIL(list, link) do {			\
++	dwc_list_link_t *__prev__ = (list)->prev;		\
++	(list)->prev = (link);					\
++	(link)->next = (list);					\
++	(link)->prev = __prev__;				\
++	__prev__->next = (link);				\
++} while (0)
++#endif
++
++#if 0
++static inline void __list_add(struct list_head *new,
++                              struct list_head *prev,
++                              struct list_head *next)
++{
++        next->prev = new;
++        new->next = next;
++        new->prev = prev;
++        prev->next = new;
++}
++
++static inline void list_add(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head, head->next);
++}
++
++static inline void list_add_tail(struct list_head *new, struct list_head *head)
++{
++        __list_add(new, head->prev, head);
++}
++
++static inline void __list_del(struct list_head * prev, struct list_head * next)
++{
++        next->prev = prev;
++        prev->next = next;
++}
++
++static inline void list_del(struct list_head *entry)
++{
++        __list_del(entry->prev, entry->next);
++        entry->next = LIST_POISON1;
++        entry->prev = LIST_POISON2;
++}
++#endif
++
++#define DWC_LIST_REMOVE(link) do {				\
++	(link)->next->prev = (link)->prev;			\
++	(link)->prev->next = (link)->next;			\
++} while (0)
++
++#define DWC_LIST_REMOVE_INIT(link) do {				\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INIT(link);					\
++} while (0)
++
++#define DWC_LIST_MOVE_HEAD(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_HEAD(list, link);			\
++} while (0)
++
++#define DWC_LIST_MOVE_TAIL(list, link) do {			\
++	DWC_LIST_REMOVE(link);					\
++	DWC_LIST_INSERT_TAIL(list, link);			\
++} while (0)
++
++#define DWC_LIST_FOREACH(var, list)				\
++	for((var) = DWC_LIST_FIRST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_NEXT(var))
++
++#define DWC_LIST_FOREACH_SAFE(var, var2, list)			\
++	for((var) = DWC_LIST_FIRST(list), (var2) = DWC_LIST_NEXT(var);	\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = (var2), (var2) = DWC_LIST_NEXT(var2))
++
++#define DWC_LIST_FOREACH_REVERSE(var, list)			\
++	for((var) = DWC_LIST_LAST(list);			\
++	    (var) != DWC_LIST_END(list);			\
++	    (var) = DWC_LIST_PREV(var))
++
++/*
++ * Singly-linked List definitions.
++ */
++#define DWC_SLIST_HEAD(name, type)					\
++struct name {								\
++	struct type *slh_first;	/* first element */			\
++}
++
++#define DWC_SLIST_HEAD_INITIALIZER(head)				\
++	{ NULL }
++
++#define DWC_SLIST_ENTRY(type)						\
++struct {								\
++	struct type *sle_next;	/* next element */			\
++}
++
++/*
++ * Singly-linked List access methods.
++ */
++#define DWC_SLIST_FIRST(head)	((head)->slh_first)
++#define DWC_SLIST_END(head)		NULL
++#define DWC_SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
++#define DWC_SLIST_NEXT(elm, field)	((elm)->field.sle_next)
++
++#define DWC_SLIST_FOREACH(var, head, field)				\
++	for((var) = SLIST_FIRST(head);					\
++	    (var) != SLIST_END(head);					\
++	    (var) = SLIST_NEXT(var, field))
++
++#define DWC_SLIST_FOREACH_PREVPTR(var, varp, head, field)		\
++	for((varp) = &SLIST_FIRST((head));				\
++	    ((var) = *(varp)) != SLIST_END(head);			\
++	    (varp) = &SLIST_NEXT((var), field))
++
++/*
++ * Singly-linked List functions.
++ */
++#define DWC_SLIST_INIT(head) {						\
++	SLIST_FIRST(head) = SLIST_END(head);				\
++}
++
++#define DWC_SLIST_INSERT_AFTER(slistelm, elm, field) do {		\
++	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
++	(slistelm)->field.sle_next = (elm);				\
++} while (0)
++
++#define DWC_SLIST_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.sle_next = (head)->slh_first;			\
++	(head)->slh_first = (elm);					\
++} while (0)
++
++#define DWC_SLIST_REMOVE_NEXT(head, elm, field) do {			\
++	(elm)->field.sle_next = (elm)->field.sle_next->field.sle_next;	\
++} while (0)
++
++#define DWC_SLIST_REMOVE_HEAD(head, field) do {				\
++	(head)->slh_first = (head)->slh_first->field.sle_next;		\
++} while (0)
++
++#define DWC_SLIST_REMOVE(head, elm, type, field) do {			\
++	if ((head)->slh_first == (elm)) {				\
++		SLIST_REMOVE_HEAD((head), field);			\
++	}								\
++	else {								\
++		struct type *curelm = (head)->slh_first;		\
++		while( curelm->field.sle_next != (elm) )		\
++			curelm = curelm->field.sle_next;		\
++		curelm->field.sle_next =				\
++		    curelm->field.sle_next->field.sle_next;		\
++	}								\
++} while (0)
++
++/*
++ * Simple queue definitions.
++ */
++#define DWC_SIMPLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *sqh_first;	/* first element */			\
++	struct type **sqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_SIMPLEQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).sqh_first }
++
++#define DWC_SIMPLEQ_ENTRY(type)						\
++struct {								\
++	struct type *sqe_next;	/* next element */			\
++}
++
++/*
++ * Simple queue access methods.
++ */
++#define DWC_SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
++#define DWC_SIMPLEQ_END(head)	    NULL
++#define DWC_SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
++#define DWC_SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
++
++#define DWC_SIMPLEQ_FOREACH(var, head, field)				\
++	for((var) = SIMPLEQ_FIRST(head);				\
++	    (var) != SIMPLEQ_END(head);					\
++	    (var) = SIMPLEQ_NEXT(var, field))
++
++/*
++ * Simple queue functions.
++ */
++#define DWC_SIMPLEQ_INIT(head) do {					\
++	(head)->sqh_first = NULL;					\
++	(head)->sqh_last = &(head)->sqh_first;				\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(head)->sqh_first = (elm);					\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.sqe_next = NULL;					\
++	*(head)->sqh_last = (elm);					\
++	(head)->sqh_last = &(elm)->field.sqe_next;			\
++} while (0)
++
++#define DWC_SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
++		(head)->sqh_last = &(elm)->field.sqe_next;		\
++	(listelm)->field.sqe_next = (elm);				\
++} while (0)
++
++#define DWC_SIMPLEQ_REMOVE_HEAD(head, field) do {			\
++	if (((head)->sqh_first = (head)->sqh_first->field.sqe_next) == NULL) \
++		(head)->sqh_last = &(head)->sqh_first;			\
++} while (0)
++
++/*
++ * Tail queue definitions.
++ */
++#define DWC_TAILQ_HEAD(name, type)					\
++struct name {								\
++	struct type *tqh_first;	/* first element */			\
++	struct type **tqh_last;	/* addr of last next element */		\
++}
++
++#define DWC_TAILQ_HEAD_INITIALIZER(head)				\
++	{ NULL, &(head).tqh_first }
++
++#define DWC_TAILQ_ENTRY(type)						\
++struct {								\
++	struct type *tqe_next;	/* next element */			\
++	struct type **tqe_prev;	/* address of previous next element */	\
++}
++
++/*
++ * tail queue access methods
++ */
++#define DWC_TAILQ_FIRST(head)		((head)->tqh_first)
++#define DWC_TAILQ_END(head)		NULL
++#define DWC_TAILQ_NEXT(elm, field)	((elm)->field.tqe_next)
++#define DWC_TAILQ_LAST(head, headname)					\
++	(*(((struct headname *)((head)->tqh_last))->tqh_last))
++/* XXX */
++#define DWC_TAILQ_PREV(elm, headname, field)				\
++	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
++#define DWC_TAILQ_EMPTY(head)						\
++	(TAILQ_FIRST(head) == TAILQ_END(head))
++
++#define DWC_TAILQ_FOREACH(var, head, field)				\
++	for((var) = TAILQ_FIRST(head);					\
++	    (var) != TAILQ_END(head);					\
++	    (var) = TAILQ_NEXT(var, field))
++
++#define DWC_TAILQ_FOREACH_REVERSE(var, head, headname, field)		\
++	for((var) = TAILQ_LAST(head, headname);				\
++	    (var) != TAILQ_END(head);					\
++	    (var) = TAILQ_PREV(var, headname, field))
++
++/*
++ * Tail queue functions.
++ */
++#define DWC_TAILQ_INIT(head) do {					\
++	(head)->tqh_first = NULL;					\
++	(head)->tqh_last = &(head)->tqh_first;				\
++} while (0)
++
++#define DWC_TAILQ_INSERT_HEAD(head, elm, field) do {			\
++	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
++		(head)->tqh_first->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(head)->tqh_first = (elm);					\
++	(elm)->field.tqe_prev = &(head)->tqh_first;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.tqe_next = NULL;					\
++	(elm)->field.tqe_prev = (head)->tqh_last;			\
++	*(head)->tqh_last = (elm);					\
++	(head)->tqh_last = &(elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
++	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    &(elm)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm)->field.tqe_next;		\
++	(listelm)->field.tqe_next = (elm);				\
++	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_INSERT_BEFORE(listelm, elm, field) do {		\
++	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
++	(elm)->field.tqe_next = (listelm);				\
++	*(listelm)->field.tqe_prev = (elm);				\
++	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
++} while (0)
++
++#define DWC_TAILQ_REMOVE(head, elm, field) do {				\
++	if (((elm)->field.tqe_next) != NULL)				\
++		(elm)->field.tqe_next->field.tqe_prev =			\
++		    (elm)->field.tqe_prev;				\
++	else								\
++		(head)->tqh_last = (elm)->field.tqe_prev;		\
++	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
++} while (0)
++
++#define DWC_TAILQ_REPLACE(head, elm, elm2, field) do {			\
++	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
++		(elm2)->field.tqe_next->field.tqe_prev =		\
++		    &(elm2)->field.tqe_next;				\
++	else								\
++		(head)->tqh_last = &(elm2)->field.tqe_next;		\
++	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
++	*(elm2)->field.tqe_prev = (elm2);				\
++} while (0)
++
++/*
++ * Circular queue definitions.
++ */
++#define DWC_CIRCLEQ_HEAD(name, type)					\
++struct name {								\
++	struct type *cqh_first;		/* first element */		\
++	struct type *cqh_last;		/* last element */		\
++}
++
++#define DWC_CIRCLEQ_HEAD_INITIALIZER(head)				\
++	{ DWC_CIRCLEQ_END(&head), DWC_CIRCLEQ_END(&head) }
++
++#define DWC_CIRCLEQ_ENTRY(type)						\
++struct {								\
++	struct type *cqe_next;		/* next element */		\
++	struct type *cqe_prev;		/* previous element */		\
++}
++
++/*
++ * Circular queue access methods
++ */
++#define DWC_CIRCLEQ_FIRST(head)		((head)->cqh_first)
++#define DWC_CIRCLEQ_LAST(head)		((head)->cqh_last)
++#define DWC_CIRCLEQ_END(head)		((void *)(head))
++#define DWC_CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
++#define DWC_CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
++#define DWC_CIRCLEQ_EMPTY(head)						\
++	(DWC_CIRCLEQ_FIRST(head) == DWC_CIRCLEQ_END(head))
++
++#define DWC_CIRCLEQ_EMPTY_ENTRY(elm, field) (((elm)->field.cqe_next == NULL) && ((elm)->field.cqe_prev == NULL))
++
++#define DWC_CIRCLEQ_FOREACH(var, head, field)				\
++	for((var) = DWC_CIRCLEQ_FIRST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_SAFE(var, var2, head, field)			\
++	for((var) = DWC_CIRCLEQ_FIRST(head), var2 = DWC_CIRCLEQ_NEXT(var, field); \
++	    (var) != DWC_CIRCLEQ_END(head);					\
++	    (var) = var2, var2 = DWC_CIRCLEQ_NEXT(var, field))
++
++#define DWC_CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
++	for((var) = DWC_CIRCLEQ_LAST(head);				\
++	    (var) != DWC_CIRCLEQ_END(head);				\
++	    (var) = DWC_CIRCLEQ_PREV(var, field))
++
++/*
++ * Circular queue functions.
++ */
++#define DWC_CIRCLEQ_INIT(head) do {					\
++	(head)->cqh_first = DWC_CIRCLEQ_END(head);			\
++	(head)->cqh_last = DWC_CIRCLEQ_END(head);			\
++} while (0)
++
++#define DWC_CIRCLEQ_INIT_ENTRY(elm, field) do {				\
++	(elm)->field.cqe_next = NULL;					\
++	(elm)->field.cqe_prev = NULL;					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
++	(elm)->field.cqe_prev = (listelm);				\
++	if ((listelm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
++	(listelm)->field.cqe_next = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {	\
++	(elm)->field.cqe_next = (listelm);				\
++	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
++	if ((listelm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
++	(listelm)->field.cqe_prev = (elm);				\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
++	(elm)->field.cqe_next = (head)->cqh_first;			\
++	(elm)->field.cqe_prev = DWC_CIRCLEQ_END(head);			\
++	if ((head)->cqh_last == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_last = (elm);				\
++	else								\
++		(head)->cqh_first->field.cqe_prev = (elm);		\
++	(head)->cqh_first = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
++	(elm)->field.cqe_next = DWC_CIRCLEQ_END(head);			\
++	(elm)->field.cqe_prev = (head)->cqh_last;			\
++	if ((head)->cqh_first == DWC_CIRCLEQ_END(head))			\
++		(head)->cqh_first = (elm);				\
++	else								\
++		(head)->cqh_last->field.cqe_next = (elm);		\
++	(head)->cqh_last = (elm);					\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE(head, elm, field) do {			\
++	if ((elm)->field.cqe_next == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_last = (elm)->field.cqe_prev;		\
++	else								\
++		(elm)->field.cqe_next->field.cqe_prev =			\
++		    (elm)->field.cqe_prev;				\
++	if ((elm)->field.cqe_prev == DWC_CIRCLEQ_END(head))		\
++		(head)->cqh_first = (elm)->field.cqe_next;		\
++	else								\
++		(elm)->field.cqe_prev->field.cqe_next =			\
++		    (elm)->field.cqe_next;				\
++} while (0)
++
++#define DWC_CIRCLEQ_REMOVE_INIT(head, elm, field) do {			\
++	DWC_CIRCLEQ_REMOVE(head, elm, field);				\
++	DWC_CIRCLEQ_INIT_ENTRY(elm, field);				\
++} while (0)
++
++#define DWC_CIRCLEQ_REPLACE(head, elm, elm2, field) do {		\
++	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_last = (elm2);				\
++	else								\
++		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
++	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
++	    DWC_CIRCLEQ_END(head))					\
++		(head).cqh_first = (elm2);				\
++	else								\
++		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
++} while (0)
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_LIST_H_ */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_mem.c b/drivers/usb/host/dwc_common_port/dwc_mem.c
+new file mode 100644
+index 0000000..ad645ff
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_mem.c
+@@ -0,0 +1,245 @@
++/* Memory Debugging */
++#ifdef DWC_DEBUG_MEMORY
++
++#include "dwc_os.h"
++#include "dwc_list.h"
++
++struct allocation {
++	void *addr;
++	void *ctx;
++	char *func;
++	int line;
++	uint32_t size;
++	int dma;
++	DWC_CIRCLEQ_ENTRY(allocation) entry;
++};
++
++DWC_CIRCLEQ_HEAD(allocation_queue, allocation);
++
++struct allocation_manager {
++	void *mem_ctx;
++	struct allocation_queue allocations;
++
++	/* statistics */
++	int num;
++	int num_freed;
++	int num_active;
++	uint32_t total;
++	uint32_t cur;
++	uint32_t max;
++};
++
++static struct allocation_manager *manager = NULL;
++
++static int add_allocation(void *ctx, uint32_t size, char const *func, int line, void *addr,
++			  int dma)
++{
++	struct allocation *a;
++
++	DWC_ASSERT(manager != NULL, "manager not allocated");
++
++	a = __DWC_ALLOC_ATOMIC(manager->mem_ctx, sizeof(*a));
++	if (!a) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	a->func = __DWC_ALLOC_ATOMIC(manager->mem_ctx, DWC_STRLEN(func) + 1);
++	if (!a->func) {
++		__DWC_FREE(manager->mem_ctx, a);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_MEMCPY(a->func, func, DWC_STRLEN(func) + 1);
++	a->addr = addr;
++	a->ctx = ctx;
++	a->line = line;
++	a->size = size;
++	a->dma = dma;
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->allocations, a, entry);
++
++	/* Update stats */
++	manager->num++;
++	manager->num_active++;
++	manager->total += size;
++	manager->cur += size;
++
++	if (manager->max < manager->cur) {
++		manager->max = manager->cur;
++	}
++
++	return 0;
++}
++
++static struct allocation *find_allocation(void *ctx, void *addr)
++{
++	struct allocation *a;
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		if (a->ctx == ctx && a->addr == addr) {
++			return a;
++		}
++	}
++
++	return NULL;
++}
++
++static void free_allocation(void *ctx, void *addr, char const *func, int line)
++{
++	struct allocation *a = find_allocation(ctx, addr);
++
++	if (!a) {
++		DWC_ASSERT(0,
++			   "Free of address %p that was never allocated or already freed %s:%d",
++			   addr, func, line);
++		return;
++	}
++
++	DWC_CIRCLEQ_REMOVE(&manager->allocations, a, entry);
++
++	manager->num_active--;
++	manager->num_freed++;
++	manager->cur -= a->size;
++	__DWC_FREE(manager->mem_ctx, a->func);
++	__DWC_FREE(manager->mem_ctx, a);
++}
++
++int dwc_memory_debug_start(void *mem_ctx)
++{
++	DWC_ASSERT(manager == NULL, "Memory debugging has already started\n");
++
++	if (manager) {
++		return -DWC_E_BUSY;
++	}
++
++	manager = __DWC_ALLOC(mem_ctx, sizeof(*manager));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->allocations);
++	manager->mem_ctx = mem_ctx;
++	manager->num = 0;
++	manager->num_freed = 0;
++	manager->num_active = 0;
++	manager->total = 0;
++	manager->cur = 0;
++	manager->max = 0;
++
++	return 0;
++}
++
++void dwc_memory_debug_stop(void)
++{
++	struct allocation *a;
++
++	dwc_memory_debug_report();
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_ERROR("Memory leaked from %s:%d\n", a->func, a->line);
++		free_allocation(a->ctx, a->addr, NULL, -1);
++	}
++
++	__DWC_FREE(manager->mem_ctx, manager);
++}
++
++void dwc_memory_debug_report(void)
++{
++	struct allocation *a;
++
++	DWC_PRINTF("\n\n\n----------------- Memory Debugging Report -----------------\n\n");
++	DWC_PRINTF("Num Allocations = %d\n", manager->num);
++	DWC_PRINTF("Freed = %d\n", manager->num_freed);
++	DWC_PRINTF("Active = %d\n", manager->num_active);
++	DWC_PRINTF("Current Memory Used = %d\n", manager->cur);
++	DWC_PRINTF("Total Memory Used = %d\n", manager->total);
++	DWC_PRINTF("Maximum Memory Used at Once = %d\n", manager->max);
++	DWC_PRINTF("Unfreed allocations:\n");
++
++	DWC_CIRCLEQ_FOREACH(a, &manager->allocations, entry) {
++		DWC_PRINTF("    addr=%p, size=%d from %s:%d, DMA=%d\n",
++			   a->addr, a->size, a->func, a->line, a->dma);
++	}
++}
++
++/* The replacement functions */
++void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line)
++{
++	void *addr = __DWC_ALLOC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func,
++			     int line)
++{
++	void *addr = __DWC_ALLOC_ATOMIC(mem_ctx, size);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(mem_ctx, size, func, line, addr, 0)) {
++		__DWC_FREE(mem_ctx, addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line)
++{
++	free_allocation(mem_ctx, addr, func, line);
++	__DWC_FREE(mem_ctx, addr);
++}
++
++void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++			  char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size,
++				 dwc_dma_t *dma_addr, char const *func, int line)
++{
++	void *addr = __DWC_DMA_ALLOC_ATOMIC(dma_ctx, size, dma_addr);
++
++	if (!addr) {
++		return NULL;
++	}
++
++	if (add_allocation(dma_ctx, size, func, line, addr, 1)) {
++		__DWC_DMA_FREE(dma_ctx, size, addr, *dma_addr);
++		return NULL;
++	}
++
++	return addr;
++}
++
++void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			dwc_dma_t dma_addr, char const *func, int line)
++{
++	free_allocation(dma_ctx, virt_addr, func, line);
++	__DWC_DMA_FREE(dma_ctx, size, virt_addr, dma_addr);
++}
++
++#endif /* DWC_DEBUG_MEMORY */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_modpow.c b/drivers/usb/host/dwc_common_port/dwc_modpow.c
+new file mode 100644
+index 0000000..2004538
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.c
+@@ -0,0 +1,636 @@
++/* Bignum routines adapted from PUTTY sources.  PuTTY copyright notice follows.
++ *
++ * PuTTY is copyright 1997-2007 Simon Tatham.
++ *
++ * Portions copyright Robert de Bath, Joris van Rantwijk, Delian
++ * Delchev, Andreas Schultz, Jeroen Massar, Wez Furlong, Nicolas Barry,
++ * Justin Bradford, Ben Harris, Malcolm Smith, Ahmad Khalifa, Markus
++ * Kuhn, and CORE SDI S.A.
++ *
++ * Permission is hereby granted, free of charge, to any person
++ * obtaining a copy of this software and associated documentation files
++ * (the "Software"), to deal in the Software without restriction,
++ * including without limitation the rights to use, copy, modify, merge,
++ * publish, distribute, sublicense, and/or sell copies of the Software,
++ * and to permit persons to whom the Software is furnished to do so,
++ * subject to the following conditions:
++ *
++ * The above copyright notice and this permission notice shall be
++ * included in all copies or substantial portions of the Software.
++
++ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ * NONINFRINGEMENT.  IN NO EVENT SHALL THE COPYRIGHT HOLDERS BE LIABLE
++ * FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF
++ * CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
++ * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
++ *
++ */
++#ifdef DWC_CRYPTOLIB
++
++#ifndef CONFIG_MACH_IPMATE
++
++#include "dwc_modpow.h"
++
++#define BIGNUM_INT_MASK  0xFFFFFFFFUL
++#define BIGNUM_TOP_BIT   0x80000000UL
++#define BIGNUM_INT_BITS  32
++
++
++static void *snmalloc(void *mem_ctx, size_t n, size_t size)
++{
++    void *p;
++    size *= n;
++    if (size == 0) size = 1;
++    p = dwc_alloc(mem_ctx, size);
++    return p;
++}
++
++#define snewn(ctx, n, type) ((type *)snmalloc((ctx), (n), sizeof(type)))
++#define sfree dwc_free
++
++/*
++ * Usage notes:
++ *  * Do not call the DIVMOD_WORD macro with expressions such as array
++ *    subscripts, as some implementations object to this (see below).
++ *  * Note that none of the division methods below will cope if the
++ *    quotient won't fit into BIGNUM_INT_BITS. Callers should be careful
++ *    to avoid this case.
++ *    If this condition occurs, in the case of the x86 DIV instruction,
++ *    an overflow exception will occur, which (according to a correspondent)
++ *    will manifest on Windows as something like
++ *      0xC0000095: Integer overflow
++ *    The C variant won't give the right answer, either.
++ */
++
++#define MUL_WORD(w1, w2) ((BignumDblInt)w1 * w2)
++
++#if defined __GNUC__ && defined __i386__
++#define DIVMOD_WORD(q, r, hi, lo, w) \
++    __asm__("div %2" : \
++	    "=d" (r), "=a" (q) : \
++	    "r" (w), "d" (hi), "a" (lo))
++#else
++#define DIVMOD_WORD(q, r, hi, lo, w) do { \
++    BignumDblInt n = (((BignumDblInt)hi) << BIGNUM_INT_BITS) | lo; \
++    q = n / w; \
++    r = n % w; \
++} while (0)
++#endif
++
++//    q = n / w;
++//    r = n % w;
++
++#define BIGNUM_INT_BYTES (BIGNUM_INT_BITS / 8)
++
++#define BIGNUM_INTERNAL
++
++static Bignum newbn(void *mem_ctx, int length)
++{
++    Bignum b = snewn(mem_ctx, length + 1, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    DWC_MEMSET(b, 0, (length + 1) * sizeof(*b));
++    b[0] = length;
++    return b;
++}
++
++void freebn(void *mem_ctx, Bignum b)
++{
++    /*
++     * Burn the evidence, just in case.
++     */
++    DWC_MEMSET(b, 0, sizeof(b[0]) * (b[0] + 1));
++    sfree(mem_ctx, b);
++}
++
++/*
++ * Compute c = a * b.
++ * Input is in the first len words of a and b.
++ * Result is returned in the first 2*len words of c.
++ */
++static void internal_mul(BignumInt *a, BignumInt *b,
++			 BignumInt *c, int len)
++{
++    int i, j;
++    BignumDblInt t;
++
++    for (j = 0; j < 2 * len; j++)
++	c[j] = 0;
++
++    for (i = len - 1; i >= 0; i--) {
++	t = 0;
++	for (j = len - 1; j >= 0; j--) {
++	    t += MUL_WORD(a[i], (BignumDblInt) b[j]);
++	    t += (BignumDblInt) c[i + j + 1];
++	    c[i + j + 1] = (BignumInt) t;
++	    t = t >> BIGNUM_INT_BITS;
++	}
++	c[i] = (BignumInt) t;
++    }
++}
++
++static void internal_add_shifted(BignumInt *number,
++				 unsigned n, int shift)
++{
++    int word = 1 + (shift / BIGNUM_INT_BITS);
++    int bshift = shift % BIGNUM_INT_BITS;
++    BignumDblInt addend;
++
++    addend = (BignumDblInt)n << bshift;
++
++    while (addend) {
++	addend += number[word];
++	number[word] = (BignumInt) addend & BIGNUM_INT_MASK;
++	addend >>= BIGNUM_INT_BITS;
++	word++;
++    }
++}
++
++/*
++ * Compute a = a % m.
++ * Input in first alen words of a and first mlen words of m.
++ * Output in first alen words of a
++ * (of which first alen-mlen words will be zero).
++ * The MSW of m MUST have its high bit set.
++ * Quotient is accumulated in the `quotient' array, which is a Bignum
++ * rather than the internal bigendian format. Quotient parts are shifted
++ * left by `qshift' before adding into quot.
++ */
++static void internal_mod(BignumInt *a, int alen,
++			 BignumInt *m, int mlen,
++			 BignumInt *quot, int qshift)
++{
++    BignumInt m0, m1;
++    unsigned int h;
++    int i, k;
++
++    m0 = m[0];
++    if (mlen > 1)
++	m1 = m[1];
++    else
++	m1 = 0;
++
++    for (i = 0; i <= alen - mlen; i++) {
++	BignumDblInt t;
++	unsigned int q, r, c, ai1;
++
++	if (i == 0) {
++	    h = 0;
++	} else {
++	    h = a[i - 1];
++	    a[i - 1] = 0;
++	}
++
++	if (i == alen - 1)
++	    ai1 = 0;
++	else
++	    ai1 = a[i + 1];
++
++	/* Find q = h:a[i] / m0 */
++	if (h >= m0) {
++	    /*
++	     * Special case.
++	     *
++	     * To illustrate it, suppose a BignumInt is 8 bits, and
++	     * we are dividing (say) A1:23:45:67 by A1:B2:C3. Then
++	     * our initial division will be 0xA123 / 0xA1, which
++	     * will give a quotient of 0x100 and a divide overflow.
++	     * However, the invariants in this division algorithm
++	     * are not violated, since the full number A1:23:... is
++	     * _less_ than the quotient prefix A1:B2:... and so the
++	     * following correction loop would have sorted it out.
++	     *
++	     * In this situation we set q to be the largest
++	     * quotient we _can_ stomach (0xFF, of course).
++	     */
++	    q = BIGNUM_INT_MASK;
++	} else {
++	    /* Macro doesn't want an array subscript expression passed
++	     * into it (see definition), so use a temporary. */
++	    BignumInt tmplo = a[i];
++	    DIVMOD_WORD(q, r, h, tmplo, m0);
++
++	    /* Refine our estimate of q by looking at
++	     h:a[i]:a[i+1] / m0:m1 */
++	    t = MUL_WORD(m1, q);
++	    if (t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) {
++		q--;
++		t -= m1;
++		r = (r + m0) & BIGNUM_INT_MASK;     /* overflow? */
++		if (r >= (BignumDblInt) m0 &&
++		    t > ((BignumDblInt) r << BIGNUM_INT_BITS) + ai1) q--;
++	    }
++	}
++
++	/* Subtract q * m from a[i...] */
++	c = 0;
++	for (k = mlen - 1; k >= 0; k--) {
++	    t = MUL_WORD(q, m[k]);
++	    t += c;
++	    c = (unsigned)(t >> BIGNUM_INT_BITS);
++	    if ((BignumInt) t > a[i + k])
++		c++;
++	    a[i + k] -= (BignumInt) t;
++	}
++
++	/* Add back m in case of borrow */
++	if (c != h) {
++	    t = 0;
++	    for (k = mlen - 1; k >= 0; k--) {
++		t += m[k];
++		t += a[i + k];
++		a[i + k] = (BignumInt) t;
++		t = t >> BIGNUM_INT_BITS;
++	    }
++	    q--;
++	}
++	if (quot)
++	    internal_add_shifted(quot, q, qshift + BIGNUM_INT_BITS * (alen - mlen - i));
++    }
++}
++
++/*
++ * Compute p % mod.
++ * The most significant word of mod MUST be non-zero.
++ * We assume that the result array is the same size as the mod array.
++ * We optionally write out a quotient if `quotient' is non-NULL.
++ * We can avoid writing out the result if `result' is NULL.
++ */
++void bigdivmod(void *mem_ctx, Bignum p, Bignum mod, Bignum result, Bignum quotient)
++{
++    BignumInt *n, *m;
++    int mshift;
++    int plen, mlen, i, j;
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS-1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] = (m[i] << mshift) | (m[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    plen = p[0];
++    /* Ensure plen > mlen */
++    if (plen <= mlen)
++	plen = mlen + 1;
++
++    /* Allocate n of size plen, copy p to n */
++    n = snewn(mem_ctx, plen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    for (j = 0; j < plen; j++)
++	n[j] = 0;
++    for (j = 1; j <= (int)p[0]; j++)
++	n[plen - j] = p[j];
++
++    /* Main computation */
++    internal_mod(n, plen, m, mlen, quotient, mshift);
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = plen - mlen - 1; i < plen - 1; i++)
++	    n[i] = (n[i] << mshift) | (n[i + 1] >> (BIGNUM_INT_BITS - mshift));
++	n[plen - 1] = n[plen - 1] << mshift;
++	internal_mod(n, plen, m, mlen, quotient, 0);
++	for (i = plen - 1; i >= plen - mlen; i--)
++	    n[i] = (n[i] >> mshift) | (n[i - 1] << (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    if (result) {
++	for (i = 1; i <= (int)result[0]; i++) {
++	    int j = plen - i;
++	    result[i] = j >= 0 ? n[j] : 0;
++	}
++    }
++
++    /* Free temporary arrays */
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < plen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++}
++
++/*
++ * Simple remainder.
++ */
++Bignum bigmod(void *mem_ctx, Bignum a, Bignum b)
++{
++    Bignum r = newbn(mem_ctx, b[0]);
++    bigdivmod(mem_ctx, a, b, r, NULL);
++    return r;
++}
++
++/*
++ * Compute (base ^ exp) % mod.
++ */
++Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod)
++{
++    BignumInt *a, *b, *n, *m;
++    int mshift;
++    int mlen, i, j;
++    Bignum base, result;
++
++    /*
++     * The most significant word of mod needs to be non-zero. It
++     * should already be, but let's make sure.
++     */
++    //assert(mod[mod[0]] != 0);
++
++    /*
++     * Make sure the base is smaller than the modulus, by reducing
++     * it modulo the modulus if not.
++     */
++    base = bigmod(mem_ctx, base_in, mod);
++
++    /* Allocate m of size mlen, copy mod to m */
++    /* We use big endian internally */
++    mlen = mod[0];
++    m = snewn(mem_ctx, mlen, BignumInt);
++    //if (!m)
++    //abort();		       /* FIXME */
++    for (j = 0; j < mlen; j++)
++	m[j] = mod[mod[0] - j];
++
++    /* Shift m left to make msb bit set */
++    for (mshift = 0; mshift < BIGNUM_INT_BITS - 1; mshift++)
++	if ((m[0] << mshift) & BIGNUM_TOP_BIT)
++	    break;
++    if (mshift) {
++	for (i = 0; i < mlen - 1; i++)
++	    m[i] =
++		(m[i] << mshift) | (m[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	m[mlen - 1] = m[mlen - 1] << mshift;
++    }
++
++    /* Allocate n of size mlen, copy base to n */
++    n = snewn(mem_ctx, mlen, BignumInt);
++    //if (!n)
++    //abort();		       /* FIXME */
++    i = mlen - base[0];
++    for (j = 0; j < i; j++)
++	n[j] = 0;
++    for (j = 0; j < base[0]; j++)
++	n[i + j] = base[base[0] - j];
++
++    /* Allocate a and b of size 2*mlen. Set a = 1 */
++    a = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!a)
++    //abort();		       /* FIXME */
++    b = snewn(mem_ctx, 2 * mlen, BignumInt);
++    //if (!b)
++    //abort();		       /* FIXME */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    a[2 * mlen - 1] = 1;
++
++    /* Skip leading zero bits of exp. */
++    i = 0;
++    j = BIGNUM_INT_BITS - 1;
++    while (i < exp[0] && (exp[exp[0] - i] & (1 << j)) == 0) {
++	j--;
++	if (j < 0) {
++	    i++;
++	    j = BIGNUM_INT_BITS - 1;
++	}
++    }
++
++    /* Main computation */
++    while (i < exp[0]) {
++	while (j >= 0) {
++	    internal_mul(a + mlen, a + mlen, b, mlen);
++	    internal_mod(b, mlen * 2, m, mlen, NULL, 0);
++	    if ((exp[exp[0] - i] & (1 << j)) != 0) {
++		internal_mul(b + mlen, n, a, mlen);
++		internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	    } else {
++		BignumInt *t;
++		t = a;
++		a = b;
++		b = t;
++	    }
++	    j--;
++	}
++	i++;
++	j = BIGNUM_INT_BITS - 1;
++    }
++
++    /* Fixup result in case the modulus was shifted */
++    if (mshift) {
++	for (i = mlen - 1; i < 2 * mlen - 1; i++)
++	    a[i] =
++		(a[i] << mshift) | (a[i + 1] >>
++				    (BIGNUM_INT_BITS - mshift));
++	a[2 * mlen - 1] = a[2 * mlen - 1] << mshift;
++	internal_mod(a, mlen * 2, m, mlen, NULL, 0);
++	for (i = 2 * mlen - 1; i >= mlen; i--)
++	    a[i] =
++		(a[i] >> mshift) | (a[i - 1] <<
++				    (BIGNUM_INT_BITS - mshift));
++    }
++
++    /* Copy result to buffer */
++    result = newbn(mem_ctx, mod[0]);
++    for (i = 0; i < mlen; i++)
++	result[result[0] - i] = a[i + mlen];
++    while (result[0] > 1 && result[result[0]] == 0)
++	result[0]--;
++
++    /* Free temporary arrays */
++    for (i = 0; i < 2 * mlen; i++)
++	a[i] = 0;
++    sfree(mem_ctx, a);
++    for (i = 0; i < 2 * mlen; i++)
++	b[i] = 0;
++    sfree(mem_ctx, b);
++    for (i = 0; i < mlen; i++)
++	m[i] = 0;
++    sfree(mem_ctx, m);
++    for (i = 0; i < mlen; i++)
++	n[i] = 0;
++    sfree(mem_ctx, n);
++
++    freebn(mem_ctx, base);
++
++    return result;
++}
++
++
++#ifdef UNITTEST
++
++static __u32 dh_p[] = {
++	96,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++	0xA93AD2CA,
++	0x4B82D120,
++	0xE0FD108E,
++	0x43DB5BFC,
++	0x74E5AB31,
++	0x08E24FA0,
++	0xBAD946E2,
++	0x770988C0,
++	0x7A615D6C,
++	0xBBE11757,
++	0x177B200C,
++	0x521F2B18,
++	0x3EC86A64,
++	0xD8760273,
++	0xD98A0864,
++	0xF12FFA06,
++	0x1AD2EE6B,
++	0xCEE3D226,
++	0x4A25619D,
++	0x1E8C94E0,
++	0xDB0933D7,
++	0xABF5AE8C,
++	0xA6E1E4C7,
++	0xB3970F85,
++	0x5D060C7D,
++	0x8AEA7157,
++	0x58DBEF0A,
++	0xECFB8504,
++	0xDF1CBA64,
++	0xA85521AB,
++	0x04507A33,
++	0xAD33170D,
++	0x8AAAC42D,
++	0x15728E5A,
++	0x98FA0510,
++	0x15D22618,
++	0xEA956AE5,
++	0x3995497C,
++	0x95581718,
++	0xDE2BCBF6,
++	0x6F4C52C9,
++	0xB5C55DF0,
++	0xEC07A28F,
++	0x9B2783A2,
++	0x180E8603,
++	0xE39E772C,
++	0x2E36CE3B,
++	0x32905E46,
++	0xCA18217C,
++	0xF1746C08,
++	0x4ABC9804,
++	0x670C354E,
++	0x7096966D,
++	0x9ED52907,
++	0x208552BB,
++	0x1C62F356,
++	0xDCA3AD96,
++	0x83655D23,
++	0xFD24CF5F,
++	0x69163FA8,
++	0x1C55D39A,
++	0x98DA4836,
++	0xA163BF05,
++	0xC2007CB8,
++	0xECE45B3D,
++	0x49286651,
++	0x7C4B1FE6,
++	0xAE9F2411,
++	0x5A899FA5,
++	0xEE386BFB,
++	0xF406B7ED,
++	0x0BFF5CB6,
++	0xA637ED6B,
++	0xF44C42E9,
++	0x625E7EC6,
++	0xE485B576,
++	0x6D51C245,
++	0x4FE1356D,
++	0xF25F1437,
++	0x302B0A6D,
++	0xCD3A431B,
++	0xEF9519B3,
++	0x8E3404DD,
++	0x514A0879,
++	0x3B139B22,
++	0x020BBEA6,
++	0x8A67CC74,
++	0x29024E08,
++	0x80DC1CD1,
++	0xC4C6628B,
++	0x2168C234,
++	0xC90FDAA2,
++	0xFFFFFFFF,
++	0xFFFFFFFF,
++};
++
++static __u32 dh_a[] = {
++	8,
++	0xdf367516,
++	0x86459caa,
++	0xe2d459a4,
++	0xd910dae0,
++	0x8a8b5e37,
++	0x67ab31c6,
++	0xf0b55ea9,
++	0x440051d6,
++};
++
++static __u32 dh_b[] = {
++	8,
++	0xded92656,
++	0xe07a048a,
++	0x6fa452cd,
++	0x2df89d30,
++	0xc75f1b0f,
++	0x8ce3578f,
++	0x7980a324,
++	0x5daec786,
++};
++
++static __u32 dh_g[] = {
++	1,
++	2,
++};
++
++int main(void)
++{
++	int i;
++	__u32 *k;
++	k = dwc_modpow(NULL, dh_g, dh_a, dh_p);
++
++	printf("\n\n");
++	for (i=0; i<k[0]; i++) {
++		__u32 word32 = k[k[0] - i];
++		__u16 l = word32 & 0xffff;
++		__u16 m = (word32 & 0xffff0000) >> 16;
++		printf("%04x %04x ", m, l);
++		if (!((i + 1)%13)) printf("\n");
++	}
++	printf("\n\n");
++
++	if ((k[0] == 0x60) && (k[1] == 0x28e490e5) && (k[0x60] == 0x5a0d3d4e)) {
++		printf("PASS\n\n");
++	}
++	else {
++		printf("FAIL\n\n");
++	}
++
++}
++
++#endif /* UNITTEST */
++
++#endif /* CONFIG_MACH_IPMATE */
++
++#endif /*DWC_CRYPTOLIB */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_modpow.h b/drivers/usb/host/dwc_common_port/dwc_modpow.h
+new file mode 100644
+index 0000000..64f00c2
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_modpow.h
+@@ -0,0 +1,34 @@
++/*
++ * dwc_modpow.h
++ * See dwc_modpow.c for license and changes
++ */
++#ifndef _DWC_MODPOW_H
++#define _DWC_MODPOW_H
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * This file defines the module exponentiation function which is only used
++ * internally by the DWC UWB modules for calculation of PKs during numeric
++ * association.  The routine is taken from the PUTTY, an open source terminal
++ * emulator.  The PUTTY License is preserved in the dwc_modpow.c file.
++ *
++ */
++
++typedef uint32_t BignumInt;
++typedef uint64_t BignumDblInt;
++typedef BignumInt *Bignum;
++
++/* Compute modular exponentiaion */
++extern Bignum dwc_modpow(void *mem_ctx, Bignum base_in, Bignum exp, Bignum mod);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _LINUX_BIGNUM_H */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_notifier.c b/drivers/usb/host/dwc_common_port/dwc_notifier.c
+new file mode 100644
+index 0000000..8b3772a
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.c
+@@ -0,0 +1,319 @@
++#ifdef DWC_NOTIFYLIB
++
++#include "dwc_notifier.h"
++#include "dwc_list.h"
++
++typedef struct dwc_observer {
++	void *observer;
++	dwc_notifier_callback_t callback;
++	void *data;
++	char *notification;
++	DWC_CIRCLEQ_ENTRY(dwc_observer) list_entry;
++} observer_t;
++
++DWC_CIRCLEQ_HEAD(observer_queue, dwc_observer);
++
++typedef struct dwc_notifier {
++	void *mem_ctx;
++	void *object;
++	struct observer_queue observers;
++	DWC_CIRCLEQ_ENTRY(dwc_notifier) list_entry;
++} notifier_t;
++
++DWC_CIRCLEQ_HEAD(notifier_queue, dwc_notifier);
++
++typedef struct manager {
++	void *mem_ctx;
++	void *wkq_ctx;
++	dwc_workq_t *wq;
++//	dwc_mutex_t *mutex;
++	struct notifier_queue notifiers;
++} manager_t;
++
++static manager_t *manager = NULL;
++
++static int create_manager(void *mem_ctx, void *wkq_ctx)
++{
++	manager = dwc_alloc(mem_ctx, sizeof(manager_t));
++	if (!manager) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INIT(&manager->notifiers);
++
++	manager->wq = dwc_workq_alloc(wkq_ctx, "DWC Notification WorkQ");
++	if (!manager->wq) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	return 0;
++}
++
++static void free_manager(void)
++{
++	dwc_workq_free(manager->wq);
++
++	/* All notifiers must have unregistered themselves before this module
++	 * can be removed.  Hitting this assertion indicates a programmer
++	 * error. */
++	DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&manager->notifiers),
++		   "Notification manager being freed before all notifiers have been removed");
++	dwc_free(manager->mem_ctx, manager);
++}
++
++#ifdef DEBUG
++static void dump_manager(void)
++{
++	notifier_t *n;
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_DEBUG("List of all notifiers and observers:\n");
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		DWC_DEBUG("Notifier %p has observers:\n", n->object);
++		DWC_CIRCLEQ_FOREACH(o, &n->observers, list_entry) {
++			DWC_DEBUG("    %p watching %s\n", o->observer, o->notification);
++		}
++	}
++}
++#else
++#define dump_manager(...)
++#endif
++
++static observer_t *alloc_observer(void *mem_ctx, void *observer, char *notification,
++				  dwc_notifier_callback_t callback, void *data)
++{
++	observer_t *new_observer = dwc_alloc(mem_ctx, sizeof(observer_t));
++
++	if (!new_observer) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT_ENTRY(new_observer, list_entry);
++	new_observer->observer = observer;
++	new_observer->notification = notification;
++	new_observer->callback = callback;
++	new_observer->data = data;
++	return new_observer;
++}
++
++static void free_observer(void *mem_ctx, observer_t *observer)
++{
++	dwc_free(mem_ctx, observer);
++}
++
++static notifier_t *alloc_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	if (!object) {
++		return NULL;
++	}
++
++	notifier = dwc_alloc(mem_ctx, sizeof(notifier_t));
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INIT(&notifier->observers);
++	DWC_CIRCLEQ_INIT_ENTRY(notifier, list_entry);
++
++	notifier->mem_ctx = mem_ctx;
++	notifier->object = object;
++	return notifier;
++}
++
++static void free_notifier(notifier_t *notifier)
++{
++	observer_t *observer;
++
++	DWC_CIRCLEQ_FOREACH(observer, &notifier->observers, list_entry) {
++		free_observer(notifier->mem_ctx, observer);
++	}
++
++	dwc_free(notifier->mem_ctx, notifier);
++}
++
++static notifier_t *find_notifier(void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!object) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_FOREACH(notifier, &manager->notifiers, list_entry) {
++		if (notifier->object == object) {
++			return notifier;
++		}
++	}
++
++	return NULL;
++}
++
++int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx)
++{
++	return create_manager(mem_ctx, wkq_ctx);
++}
++
++void dwc_free_notification_manager(void)
++{
++	free_manager();
++}
++
++dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object)
++{
++	notifier_t *notifier;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	notifier = find_notifier(object);
++	if (notifier) {
++		DWC_ERROR("Notifier %p is already registered\n", object);
++		return NULL;
++	}
++
++	notifier = alloc_notifier(mem_ctx, object);
++	if (!notifier) {
++		return NULL;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&manager->notifiers, notifier, list_entry);
++
++	DWC_INFO("Notifier %p registered", object);
++	dump_manager();
++
++	return notifier;
++}
++
++void dwc_unregister_notifier(dwc_notifier_t *notifier)
++{
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	if (!DWC_CIRCLEQ_EMPTY(&notifier->observers)) {
++		observer_t *o;
++
++		DWC_ERROR("Notifier %p has active observers when removing\n", notifier->object);
++		DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++			DWC_DEBUGC("    %p watching %s\n", o->observer, o->notification);
++		}
++
++		DWC_ASSERT(DWC_CIRCLEQ_EMPTY(&notifier->observers),
++			   "Notifier %p has active observers when removing", notifier);
++	}
++
++	DWC_CIRCLEQ_REMOVE_INIT(&manager->notifiers, notifier, list_entry);
++	free_notifier(notifier);
++
++	DWC_INFO("Notifier unregistered");
++	dump_manager();
++}
++
++/* Add an observer to observe the notifier for a particular state, event, or notification. */
++int dwc_add_observer(void *observer, void *object, char *notification,
++		     dwc_notifier_callback_t callback, void *data)
++{
++	notifier_t *notifier = find_notifier(object);
++	observer_t *new_observer;
++
++	if (!notifier) {
++		DWC_ERROR("Notifier %p is not found when adding observer\n", object);
++		return -DWC_E_INVALID;
++	}
++
++	new_observer = alloc_observer(notifier->mem_ctx, observer, notification, callback, data);
++	if (!new_observer) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	DWC_CIRCLEQ_INSERT_TAIL(&notifier->observers, new_observer, list_entry);
++
++	DWC_INFO("Added observer %p to notifier %p observing notification %s, callback=%p, data=%p",
++		 observer, object, notification, callback, data);
++
++	dump_manager();
++	return 0;
++}
++
++int dwc_remove_observer(void *observer)
++{
++	notifier_t *n;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(n, &manager->notifiers, list_entry) {
++		observer_t *o;
++		observer_t *o2;
++
++		DWC_CIRCLEQ_FOREACH_SAFE(o, o2, &n->observers, list_entry) {
++			if (o->observer == observer) {
++				DWC_CIRCLEQ_REMOVE_INIT(&n->observers, o, list_entry);
++				DWC_INFO("Removing observer %p from notifier %p watching notification %s:",
++					 o->observer, n->object, o->notification);
++				free_observer(n->mem_ctx, o);
++			}
++		}
++	}
++
++	dump_manager();
++	return 0;
++}
++
++typedef struct callback_data {
++	void *mem_ctx;
++	dwc_notifier_callback_t cb;
++	void *observer;
++	void *data;
++	void *object;
++	char *notification;
++	void *notification_data;
++} cb_data_t;
++
++static void cb_task(void *data)
++{
++	cb_data_t *cb = (cb_data_t *)data;
++
++	cb->cb(cb->object, cb->notification, cb->observer, cb->notification_data, cb->data);
++	dwc_free(cb->mem_ctx, cb);
++}
++
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data)
++{
++	observer_t *o;
++
++	DWC_ASSERT(manager, "Notification manager not found");
++
++	DWC_CIRCLEQ_FOREACH(o, &notifier->observers, list_entry) {
++		int len = DWC_STRLEN(notification);
++
++		if (DWC_STRLEN(o->notification) != len) {
++			continue;
++		}
++
++		if (DWC_STRNCMP(o->notification, notification, len) == 0) {
++			cb_data_t *cb_data = dwc_alloc(notifier->mem_ctx, sizeof(cb_data_t));
++
++			if (!cb_data) {
++				DWC_ERROR("Failed to allocate callback data\n");
++				return;
++			}
++
++			cb_data->mem_ctx = notifier->mem_ctx;
++			cb_data->cb = o->callback;
++			cb_data->observer = o->observer;
++			cb_data->data = o->data;
++			cb_data->object = notifier->object;
++			cb_data->notification = notification;
++			cb_data->notification_data = notification_data;
++			DWC_DEBUGC("Observer found %p for notification %s\n", o->observer, notification);
++			DWC_WORKQ_SCHEDULE(manager->wq, cb_task, cb_data,
++					   "Notify callback from %p for Notification %s, to observer %p",
++					   cb_data->object, notification, cb_data->observer);
++		}
++	}
++}
++
++#endif	/* DWC_NOTIFYLIB */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_notifier.h b/drivers/usb/host/dwc_common_port/dwc_notifier.h
+new file mode 100644
+index 0000000..4a8cdfe
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_notifier.h
+@@ -0,0 +1,122 @@
++
++#ifndef __DWC_NOTIFIER_H__
++#define __DWC_NOTIFIER_H__
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++#include "dwc_os.h"
++
++/** @file
++ *
++ * A simple implementation of the Observer pattern.  Any "module" can
++ * register as an observer or notifier.  The notion of "module" is abstract and
++ * can mean anything used to identify either an observer or notifier.  Usually
++ * it will be a pointer to a data structure which contains some state, ie an
++ * object.
++ *
++ * Before any notifiers can be added, the global notification manager must be
++ * brought up with dwc_alloc_notification_manager().
++ * dwc_free_notification_manager() will bring it down and free all resources.
++ * These would typically be called upon module load and unload.  The
++ * notification manager is a single global instance that handles all registered
++ * observable modules and observers so this should be done only once.
++ *
++ * A module can be observable by using Notifications to publicize some general
++ * information about it's state or operation.  It does not care who listens, or
++ * even if anyone listens, or what they do with the information.  The observable
++ * modules do not need to know any information about it's observers or their
++ * interface, or their state or data.
++ *
++ * Any module can register to emit Notifications.  It should publish a list of
++ * notifications that it can emit and their behavior, such as when they will get
++ * triggered, and what information will be provided to the observer.  Then it
++ * should register itself as an observable module. See dwc_register_notifier().
++ *
++ * Any module can observe any observable, registered module, provided it has a
++ * handle to the other module and knows what notifications to observe.  See
++ * dwc_add_observer().
++ *
++ * A function of type dwc_notifier_callback_t is called whenever a notification
++ * is triggered with one or more observers observing it.  This function is
++ * called in it's own process so it may sleep or block if needed.  It is
++ * guaranteed to be called sometime after the notification has occurred and will
++ * be called once per each time the notification is triggered.  It will NOT be
++ * called in the same process context used to trigger the notification.
++ *
++ * @section Limitiations
++ *
++ * Keep in mind that Notifications that can be triggered in rapid sucession may
++ * schedule too many processes too handle.  Be aware of this limitation when
++ * designing to use notifications, and only add notifications for appropriate
++ * observable information.
++ *
++ * Also Notification callbacks are not synchronous.  If you need to synchronize
++ * the behavior between module/observer you must use other means.  And perhaps
++ * that will mean Notifications are not the proper solution.
++ */
++
++struct dwc_notifier;
++typedef struct dwc_notifier dwc_notifier_t;
++
++/** The callback function must be of this type.
++ *
++ * @param object This is the object that is being observed.
++ * @param notification This is the notification that was triggered.
++ * @param observer This is the observer
++ * @param notification_data This is notification-specific data that the notifier
++ * has included in this notification.  The value of this should be published in
++ * the documentation of the observable module with the notifications.
++ * @param user_data This is any custom data that the observer provided when
++ * adding itself as an observer to the notification. */
++typedef void (*dwc_notifier_callback_t)(void *object, char *notification, void *observer,
++					void *notification_data, void *user_data);
++
++/** Brings up the notification manager. */
++extern int dwc_alloc_notification_manager(void *mem_ctx, void *wkq_ctx);
++/** Brings down the notification manager. */
++extern void dwc_free_notification_manager(void);
++
++/** This function registers an observable module.  A dwc_notifier_t object is
++ * returned to the observable module.  This is an opaque object that is used by
++ * the observable module to trigger notifications.  This object should only be
++ * accessible to functions that are authorized to trigger notifications for this
++ * module.  Observers do not need this object. */
++extern dwc_notifier_t *dwc_register_notifier(void *mem_ctx, void *object);
++
++/** This function unregisters an observable module.  All observers have to be
++ * removed prior to unregistration. */
++extern void dwc_unregister_notifier(dwc_notifier_t *notifier);
++
++/** Add a module as an observer to the observable module.  The observable module
++ * needs to have previously registered with the notification manager.
++ *
++ * @param observer The observer module
++ * @param object The module to observe
++ * @param notification The notification to observe
++ * @param callback The callback function to call
++ * @param user_data Any additional user data to pass into the callback function */
++extern int dwc_add_observer(void *observer, void *object, char *notification,
++			    dwc_notifier_callback_t callback, void *user_data);
++
++/** Removes the specified observer from all notifications that it is currently
++ * observing. */
++extern int dwc_remove_observer(void *observer);
++
++/** This function triggers a Notification.  It should be called by the
++ * observable module, or any module or library which the observable module
++ * allows to trigger notification on it's behalf.  Such as the dwc_cc_t.
++ *
++ * dwc_notify is a non-blocking function.  Callbacks are scheduled called in
++ * their own process context for each trigger.  Callbacks can be blocking.
++ * dwc_notify can be called from interrupt context if needed.
++ *
++ */
++void dwc_notify(dwc_notifier_t *notifier, char *notification, void *notification_data);
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* __DWC_NOTIFIER_H__ */
+diff --git a/drivers/usb/host/dwc_common_port/dwc_os.h b/drivers/usb/host/dwc_common_port/dwc_os.h
+new file mode 100644
+index 0000000..9ffe929
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/dwc_os.h
+@@ -0,0 +1,1260 @@
++/* =========================================================================
++ * $File: //dwh/usb_iip/dev/software/dwc_common_port_2/dwc_os.h $
++ * $Revision: #14 $
++ * $Date: 2010/11/04 $
++ * $Change: 1621695 $
++ *
++ * Synopsys Portability Library Software and documentation
++ * (hereinafter, "Software") is an Unsupported proprietary work of
++ * Synopsys, Inc. unless otherwise expressly agreed to in writing
++ * between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product
++ * under any End User Software License Agreement or Agreement for
++ * Licensed Product with Synopsys or any supplement thereto. You are
++ * permitted to use and redistribute this Software in source and binary
++ * forms, with or without modification, provided that redistributions
++ * of source code must retain this notice. You may not view, use,
++ * disclose, copy or distribute this file or any information contained
++ * herein except pursuant to this license grant from Synopsys. If you
++ * do not agree with this notice, including the disclaimer below, then
++ * you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS"
++ * BASIS AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
++ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
++ * FOR A PARTICULAR PURPOSE ARE HEREBY DISCLAIMED. IN NO EVENT SHALL
++ * SYNOPSYS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
++ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
++ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================= */
++#ifndef _DWC_OS_H_
++#define _DWC_OS_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/** @file
++ *
++ * DWC portability library, low level os-wrapper functions
++ *
++ */
++
++/* These basic types need to be defined by some OS header file or custom header
++ * file for your specific target architecture.
++ *
++ * uint8_t, int8_t, uint16_t, int16_t, uint32_t, int32_t, uint64_t, int64_t
++ *
++ * Any custom or alternate header file must be added and enabled here.
++ */
++
++#ifdef DWC_LINUX
++# include <linux/types.h>
++# ifdef CONFIG_DEBUG_MUTEXES
++#  include <linux/mutex.h>
++# endif
++# include <linux/errno.h>
++# include <stdarg.h>
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++# include <os_dep.h>
++#endif
++
++
++/** @name Primitive Types and Values */
++
++/** We define a boolean type for consistency.  Can be either YES or NO */
++typedef uint8_t dwc_bool_t;
++#define YES  1
++#define NO   0
++
++#ifdef DWC_LINUX
++
++/** @name Error Codes */
++#define DWC_E_INVALID		EINVAL
++#define DWC_E_NO_MEMORY		ENOMEM
++#define DWC_E_NO_DEVICE		ENODEV
++#define DWC_E_NOT_SUPPORTED	EOPNOTSUPP
++#define DWC_E_TIMEOUT		ETIMEDOUT
++#define DWC_E_BUSY		EBUSY
++#define DWC_E_AGAIN		EAGAIN
++#define DWC_E_RESTART		ERESTART
++#define DWC_E_ABORT		ECONNABORTED
++#define DWC_E_SHUTDOWN		ESHUTDOWN
++#define DWC_E_NO_DATA		ENODATA
++#define DWC_E_DISCONNECT	ECONNRESET
++#define DWC_E_UNKNOWN		EINVAL
++#define DWC_E_NO_STREAM_RES	ENOSR
++#define DWC_E_COMMUNICATION	ECOMM
++#define DWC_E_OVERFLOW		EOVERFLOW
++#define DWC_E_PROTOCOL		EPROTO
++#define DWC_E_IN_PROGRESS	EINPROGRESS
++#define DWC_E_PIPE		EPIPE
++#define DWC_E_IO		EIO
++#define DWC_E_NO_SPACE		ENOSPC
++
++#else
++
++/** @name Error Codes */
++#define DWC_E_INVALID		1001
++#define DWC_E_NO_MEMORY		1002
++#define DWC_E_NO_DEVICE		1003
++#define DWC_E_NOT_SUPPORTED	1004
++#define DWC_E_TIMEOUT		1005
++#define DWC_E_BUSY		1006
++#define DWC_E_AGAIN		1007
++#define DWC_E_RESTART		1008
++#define DWC_E_ABORT		1009
++#define DWC_E_SHUTDOWN		1010
++#define DWC_E_NO_DATA		1011
++#define DWC_E_DISCONNECT	2000
++#define DWC_E_UNKNOWN		3000
++#define DWC_E_NO_STREAM_RES	4001
++#define DWC_E_COMMUNICATION	4002
++#define DWC_E_OVERFLOW		4003
++#define DWC_E_PROTOCOL		4004
++#define DWC_E_IN_PROGRESS	4005
++#define DWC_E_PIPE		4006
++#define DWC_E_IO		4007
++#define DWC_E_NO_SPACE		4008
++
++#endif
++
++
++/** @name Tracing/Logging Functions
++ *
++ * These function provide the capability to add tracing, debugging, and error
++ * messages, as well exceptions as assertions.  The WUDEV uses these
++ * extensively.  These could be logged to the main console, the serial port, an
++ * internal buffer, etc.  These functions could also be no-op if they are too
++ * expensive on your system.  By default undefining the DEBUG macro already
++ * no-ops some of these functions. */
++
++/** Returns non-zero if in interrupt context. */
++extern dwc_bool_t DWC_IN_IRQ(void);
++#define dwc_in_irq DWC_IN_IRQ
++
++/** Returns "IRQ" if DWC_IN_IRQ is true. */
++static inline char *dwc_irq(void) {
++	return DWC_IN_IRQ() ? "IRQ" : "";
++}
++
++/** Returns non-zero if in bottom-half context. */
++extern dwc_bool_t DWC_IN_BH(void);
++#define dwc_in_bh DWC_IN_BH
++
++/** Returns "BH" if DWC_IN_BH is true. */
++static inline char *dwc_bh(void) {
++	return DWC_IN_BH() ? "BH" : "";
++}
++
++/**
++ * A vprintf() clone.  Just call vprintf if you've got it.
++ */
++extern void DWC_VPRINTF(char *format, va_list args);
++#define dwc_vprintf DWC_VPRINTF
++
++/**
++ * A vsnprintf() clone.  Just call vprintf if you've got it.
++ */
++extern int DWC_VSNPRINTF(char *str, int size, char *format, va_list args);
++#define dwc_vsnprintf DWC_VSNPRINTF
++
++/**
++ * printf() clone.  Just call printf if you've go it.
++ */
++extern void DWC_PRINTF(char *format, ...)
++/* This provides compiler level static checking of the parameters if you're
++ * using GCC. */
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_printf DWC_PRINTF
++
++/**
++ * sprintf() clone.  Just call sprintf if you've got it.
++ */
++extern int DWC_SPRINTF(char *string, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 2, 3)));
++#else
++	;
++#endif
++#define dwc_sprintf DWC_SPRINTF
++
++/**
++ * snprintf() clone.  Just call snprintf if you've got it.
++ */
++extern int DWC_SNPRINTF(char *string, int size, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 3, 4)));
++#else
++	;
++#endif
++#define dwc_snprintf DWC_SNPRINTF
++
++/**
++ * Prints a WARNING message.  On systems that don't differentiate between
++ * warnings and regular log messages, just print it.  Indicates that something
++ * may be wrong with the driver.  Works like printf().
++ *
++ * Use the DWC_WARN macro to call this function.
++ */
++extern void __DWC_WARN(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an error message.  On systems that don't differentiate between errors
++ * and regular log messages, just print it.  Indicates that something went wrong
++ * with the driver.  Works like printf().
++ *
++ * Use the DWC_ERROR macro to call this function.
++ */
++extern void __DWC_ERROR(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++
++/**
++ * Prints an exception error message and takes some user-defined action such as
++ * print out a backtrace or trigger a breakpoint.  Indicates that something went
++ * abnormally wrong with the driver such as programmer error, or other
++ * exceptional condition.  It should not be ignored so even on systems without
++ * printing capability, some action should be taken to notify the developer of
++ * it.  Works like printf().
++ */
++extern void DWC_EXCEPTION(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#define dwc_exception DWC_EXCEPTION
++
++#ifndef DWC_OTG_DEBUG_LEV
++#define DWC_OTG_DEBUG_LEV 0
++#endif
++
++#ifdef DEBUG
++/**
++ * Prints out a debug message.  Used for logging/trace messages.
++ *
++ * Use the DWC_DEBUG macro to call this function
++ */
++extern void __DWC_DEBUG(char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 1, 2)));
++#else
++	;
++#endif
++#else
++#define __DWC_DEBUG printk
++#endif
++
++/**
++ * Prints out a Debug message.
++ */
++#define DWC_DEBUG(_format, _args...) __DWC_DEBUG("DEBUG:%s:%s: " _format "\n", \
++						 __func__, dwc_irq(), ## _args)
++#define dwc_debug DWC_DEBUG
++/**
++ * Prints out a Debug message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 0
++#define DWC_DEBUGC(_format, _args...) DWC_DEBUG(_format, ##_args )
++#else
++#define DWC_DEBUGC(_format, _args...)
++#endif
++#define dwc_debugc DWC_DEBUGC
++/**
++ * Prints out an informative message.
++ */
++#define DWC_INFO(_format, _args...) DWC_PRINTF("INFO:%s: " _format "\n", \
++					       dwc_irq(), ## _args)
++#define dwc_info DWC_INFO
++/**
++ * Prints out an informative message if enabled at compile time.
++ */
++#if DWC_OTG_DEBUG_LEV > 1
++#define DWC_INFOC(_format, _args...) DWC_INFO(_format, ##_args )
++#else
++#define DWC_INFOC(_format, _args...)
++#endif
++#define dwc_infoc DWC_INFOC
++/**
++ * Prints out a warning message.
++ */
++#define DWC_WARN(_format, _args...) __DWC_WARN("WARN:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_warn DWC_WARN
++/**
++ * Prints out an error message.
++ */
++#define DWC_ERROR(_format, _args...) __DWC_ERROR("ERROR:%s:%s:%d: " _format "\n", \
++					dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_error DWC_ERROR
++
++#define DWC_PROTO_ERROR(_format, _args...) __DWC_WARN("ERROR:%s:%s:%d: " _format "\n", \
++						dwc_irq(), __func__, __LINE__, ## _args)
++#define dwc_proto_error DWC_PROTO_ERROR
++
++#ifdef DEBUG
++/** Prints out a exception error message if the _expr expression fails.  Disabled
++ * if DEBUG is not enabled. */
++#define DWC_ASSERT(_expr, _format, _args...) do { \
++	if (!(_expr)) { DWC_EXCEPTION("%s:%s:%d: " _format "\n", dwc_irq(), \
++				      __FILE__, __LINE__, ## _args); } \
++	} while (0)
++#else
++#define DWC_ASSERT(_x...)
++#endif
++#define dwc_assert DWC_ASSERT
++
++
++/** @name Byte Ordering
++ * The following functions are for conversions between processor's byte ordering
++ * and specific ordering you want.
++ */
++
++/** Converts 32 bit data in CPU byte ordering to little endian. */
++extern uint32_t DWC_CPU_TO_LE32(uint32_t *p);
++#define dwc_cpu_to_le32 DWC_CPU_TO_LE32
++
++/** Converts 32 bit data in CPU byte orderint to big endian. */
++extern uint32_t DWC_CPU_TO_BE32(uint32_t *p);
++#define dwc_cpu_to_be32 DWC_CPU_TO_BE32
++
++/** Converts 32 bit little endian data to CPU byte ordering. */
++extern uint32_t DWC_LE32_TO_CPU(uint32_t *p);
++#define dwc_le32_to_cpu DWC_LE32_TO_CPU
++
++/** Converts 32 bit big endian data to CPU byte ordering. */
++extern uint32_t DWC_BE32_TO_CPU(uint32_t *p);
++#define dwc_be32_to_cpu DWC_BE32_TO_CPU
++
++/** Converts 16 bit data in CPU byte ordering to little endian. */
++extern uint16_t DWC_CPU_TO_LE16(uint16_t *p);
++#define dwc_cpu_to_le16 DWC_CPU_TO_LE16
++
++/** Converts 16 bit data in CPU byte orderint to big endian. */
++extern uint16_t DWC_CPU_TO_BE16(uint16_t *p);
++#define dwc_cpu_to_be16 DWC_CPU_TO_BE16
++
++/** Converts 16 bit little endian data to CPU byte ordering. */
++extern uint16_t DWC_LE16_TO_CPU(uint16_t *p);
++#define dwc_le16_to_cpu DWC_LE16_TO_CPU
++
++/** Converts 16 bit bi endian data to CPU byte ordering. */
++extern uint16_t DWC_BE16_TO_CPU(uint16_t *p);
++#define dwc_be16_to_cpu DWC_BE16_TO_CPU
++
++
++/** @name Register Read/Write
++ *
++ * The following six functions should be implemented to read/write registers of
++ * 32-bit and 64-bit sizes.  All modules use this to read/write register values.
++ * The reg value is a pointer to the register calculated from the void *base
++ * variable passed into the driver when it is started.  */
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for register read/write, so we
++ * just throw away the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(uint32_t volatile *reg);
++#define dwc_read_reg32(_ctx_,_reg_) DWC_READ_REG32(_reg_)
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(uint64_t volatile *reg);
++#define dwc_read_reg64(_ctx_,_reg_) DWC_READ_REG64(_reg_)
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32(_ctx_,_reg_,_val_) DWC_WRITE_REG32(_reg_, _val_)
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64(_ctx_,_reg_,_val_) DWC_WRITE_REG64(_reg_, _val_)
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG32(_reg_,_cmsk_,_smsk_)
++extern void DWC_MODIFY_REG64(uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64(_ctx_,_reg_,_cmsk_,_smsk_) DWC_MODIFY_REG64(_reg_,_cmsk_,_smsk_)
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef struct dwc_ioctx {
++	struct device *dev;
++	bus_space_tag_t iot;
++	bus_space_handle_t ioh;
++} dwc_ioctx_t;
++
++/** BSD needs two extra parameters for register read/write, so we pass
++ * them in using the IO context parameter.
++ */
++/** Reads the content of a 32-bit register. */
++extern uint32_t DWC_READ_REG32(void *io_ctx, uint32_t volatile *reg);
++#define dwc_read_reg32 DWC_READ_REG32
++
++/** Reads the content of a 64-bit register. */
++extern uint64_t DWC_READ_REG64(void *io_ctx, uint64_t volatile *reg);
++#define dwc_read_reg64 DWC_READ_REG64
++
++/** Writes to a 32-bit register. */
++extern void DWC_WRITE_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t value);
++#define dwc_write_reg32 DWC_WRITE_REG32
++
++/** Writes to a 64-bit register. */
++extern void DWC_WRITE_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t value);
++#define dwc_write_reg64 DWC_WRITE_REG64
++
++/**
++ * Modify bit values in a register.  Using the
++ * algorithm: (reg_contents & ~clear_mask) | set_mask.
++ */
++extern void DWC_MODIFY_REG32(void *io_ctx, uint32_t volatile *reg, uint32_t clear_mask, uint32_t set_mask);
++#define dwc_modify_reg32 DWC_MODIFY_REG32
++extern void DWC_MODIFY_REG64(void *io_ctx, uint64_t volatile *reg, uint64_t clear_mask, uint64_t set_mask);
++#define dwc_modify_reg64 DWC_MODIFY_REG64
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @cond */
++
++/** @name Some convenience MACROS used internally.  Define DWC_DEBUG_REGS to log the
++ * register writes. */
++
++#ifdef DWC_LINUX
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(_container_type *container, int num) { \
++	return DWC_READ_REG32(&container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(_container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(&(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(_container_type *container) { \
++	return DWC_READ_REG32(&container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(_container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(&container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_LINUX */
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++
++# ifdef DWC_DEBUG_REGS
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_DEBUG("WRITING %8s[%d]: %p: %08x", #_reg, num, \
++		  &(((uint32_t*)container->regs->_reg)[num]), data); \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_DEBUG("WRITING %11s: %p: %08x", #_reg, &container->regs->_reg, data); \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# else	/* DWC_DEBUG_REGS */
++
++#define dwc_define_read_write_reg_n(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg##_n(void *io_ctx, _container_type *container, int num) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg[num]); \
++} \
++static inline void dwc_write_##_reg##_n(void *io_ctx, _container_type *container, int num, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &(((uint32_t*)container->regs->_reg)[num]), data); \
++}
++
++#define dwc_define_read_write_reg(_reg,_container_type) \
++static inline uint32_t dwc_read_##_reg(void *io_ctx, _container_type *container) { \
++	return DWC_READ_REG32(io_ctx, &container->regs->_reg); \
++} \
++static inline void dwc_write_##_reg(void *io_ctx, _container_type *container, uint32_t data) { \
++	DWC_WRITE_REG32(io_ctx, &container->regs->_reg, data); \
++}
++
++# endif	/* DWC_DEBUG_REGS */
++
++#endif	/* DWC_FREEBSD || DWC_NETBSD */
++
++/** @endcond */
++
++
++#ifdef DWC_CRYPTOLIB
++/** @name Crypto Functions
++ *
++ * These are the low-level cryptographic functions used by the driver. */
++
++/** Perform AES CBC */
++extern int DWC_AES_CBC(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t iv[16], uint8_t *out);
++#define dwc_aes_cbc DWC_AES_CBC
++
++/** Fill the provided buffer with random bytes.  These should be cryptographic grade random numbers. */
++extern void DWC_RANDOM_BYTES(uint8_t *buffer, uint32_t length);
++#define dwc_random_bytes DWC_RANDOM_BYTES
++
++/** Perform the SHA-256 hash function */
++extern int DWC_SHA256(uint8_t *message, uint32_t len, uint8_t *out);
++#define dwc_sha256 DWC_SHA256
++
++/** Calculated the HMAC-SHA256 */
++extern int DWC_HMAC_SHA256(uint8_t *message, uint32_t messagelen, uint8_t *key, uint32_t keylen, uint8_t *out);
++#define dwc_hmac_sha256 DWC_HMAC_SHA256
++
++#endif	/* DWC_CRYPTOLIB */
++
++
++/** @name Memory Allocation
++ *
++ * These function provide access to memory allocation.  There are only 2 DMA
++ * functions and 3 Regular memory functions that need to be implemented.  None
++ * of the memory debugging routines need to be implemented.  The allocation
++ * routines all ZERO the contents of the memory.
++ *
++ * Defining DWC_DEBUG_MEMORY turns on memory debugging and statistic gathering.
++ * This checks for memory leaks, keeping track of alloc/free pairs.  It also
++ * keeps track of how much memory the driver is using at any given time. */
++
++#define DWC_PAGE_SIZE 4096
++#define DWC_PAGE_OFFSET(addr) (((uint32_t)addr) & 0xfff)
++#define DWC_PAGE_ALIGNED(addr) ((((uint32_t)addr) & 0xfff) == 0)
++
++#define DWC_INVALID_DMA_ADDR 0x0
++
++#ifdef DWC_LINUX
++/** Type for a DMA address */
++typedef dma_addr_t dwc_dma_t;
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++typedef bus_addr_t dwc_dma_t;
++#endif
++
++#ifdef DWC_FREEBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++#ifdef DWC_NETBSD
++typedef struct dwc_dmactx {
++	struct device *dev;
++	bus_dma_tag_t dma_tag;
++	bus_dmamap_t dma_map;
++	bus_dma_segment_t segs[1];
++	int nsegs;
++	bus_addr_t dma_paddr;
++	void *dma_vaddr;
++} dwc_dmactx_t;
++#endif
++
++/* @todo these functions will be added in the future */
++#if 0
++/**
++ * Creates a DMA pool from which you can allocate DMA buffers.  Buffers
++ * allocated from this pool will be guaranteed to meet the size, alignment, and
++ * boundary requirements specified.
++ *
++ * @param[in] size Specifies the size of the buffers that will be allocated from
++ * this pool.
++ * @param[in] align Specifies the byte alignment requirements of the buffers
++ * allocated from this pool.  Must be a power of 2.
++ * @param[in] boundary Specifies the N-byte boundary that buffers allocated from
++ * this pool must not cross.
++ *
++ * @returns A pointer to an internal opaque structure which is not to be
++ * accessed outside of these library functions.  Use this handle to specify
++ * which pools to allocate/free DMA buffers from and also to destroy the pool,
++ * when you are done with it.
++ */
++extern dwc_pool_t *DWC_DMA_POOL_CREATE(uint32_t size, uint32_t align, uint32_t boundary);
++
++/**
++ * Destroy a DMA pool.  All buffers allocated from that pool must be freed first.
++ */
++extern void DWC_DMA_POOL_DESTROY(dwc_pool_t *pool);
++
++/**
++ * Allocate a buffer from the specified DMA pool and zeros its contents.
++ */
++extern void *DWC_DMA_POOL_ALLOC(dwc_pool_t *pool, uint64_t *dma_addr);
++
++/**
++ * Free a previously allocated buffer from the DMA pool.
++ */
++extern void DWC_DMA_POOL_FREE(dwc_pool_t *pool, void *vaddr, void *daddr);
++#endif
++
++/** Allocates a DMA capable buffer and zeroes its contents. */
++extern void *__DWC_DMA_ALLOC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Allocates a DMA capable buffer and zeroes its contents in atomic contest */
++extern void *__DWC_DMA_ALLOC_ATOMIC(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_DMA_FREE(void *dma_ctx, uint32_t size, void *virt_addr, dwc_dma_t dma_addr);
++
++/** Allocates a block of memory and zeroes its contents. */
++extern void *__DWC_ALLOC(void *mem_ctx, uint32_t size);
++
++/** Allocates a block of memory and zeroes its contents, in an atomic manner
++ * which can be used inside interrupt context.  The size should be sufficiently
++ * small, a few KB at most, such that failures are not likely to occur.  Can just call
++ * __DWC_ALLOC if it is atomic. */
++extern void *__DWC_ALLOC_ATOMIC(void *mem_ctx, uint32_t size);
++
++/** Frees a previously allocated buffer. */
++extern void __DWC_FREE(void *mem_ctx, void *addr);
++
++#ifndef DWC_DEBUG_MEMORY
++
++#define DWC_ALLOC(_size_) __DWC_ALLOC(NULL, _size_)
++#define DWC_ALLOC_ATOMIC(_size_) __DWC_ALLOC_ATOMIC(NULL, _size_)
++#define DWC_FREE(_addr_) __DWC_FREE(NULL, _addr_)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) __DWC_DMA_ALLOC(NULL, _size_, _dma_)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) __DWC_DMA_ALLOC_ATOMIC(NULL, _size_,_dma_)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) __DWC_DMA_FREE(NULL, _size_, _virt_, _dma_)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC __DWC_DMA_ALLOC
++#define DWC_DMA_FREE __DWC_DMA_FREE
++# endif
++extern void *dwc_dma_alloc_atomic_debug(uint32_t size, dwc_dma_t *dma_addr, char const *func, int line);
++
++#else	/* DWC_DEBUG_MEMORY */
++
++extern void *dwc_alloc_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void *dwc_alloc_atomic_debug(void *mem_ctx, uint32_t size, char const *func, int line);
++extern void dwc_free_debug(void *mem_ctx, void *addr, char const *func, int line);
++extern void *dwc_dma_alloc_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++				 char const *func, int line);
++extern void *dwc_dma_alloc_atomic_debug(void *dma_ctx, uint32_t size, dwc_dma_t *dma_addr,
++				char const *func, int line);
++extern void dwc_dma_free_debug(void *dma_ctx, uint32_t size, void *virt_addr,
++			       dwc_dma_t dma_addr, char const *func, int line);
++
++extern int dwc_memory_debug_start(void *mem_ctx);
++extern void dwc_memory_debug_stop(void);
++extern void dwc_memory_debug_report(void);
++
++#define DWC_ALLOC(_size_) dwc_alloc_debug(NULL, _size_, __func__, __LINE__)
++#define DWC_ALLOC_ATOMIC(_size_) dwc_alloc_atomic_debug(NULL, _size_, \
++							__func__, __LINE__)
++#define DWC_FREE(_addr_) dwc_free_debug(NULL, _addr_, __func__, __LINE__)
++
++# ifdef DWC_LINUX
++#define DWC_DMA_ALLOC(_size_,_dma_) dwc_dma_alloc_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_ALLOC_ATOMIC(_size_,_dma_) dwc_dma_alloc_atomic_debug(NULL, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_size_,_virt_,_dma_) dwc_dma_free_debug(NULL, _size_, \
++						_virt_, _dma_, __func__, __LINE__)
++# endif
++
++# if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++#define DWC_DMA_ALLOC(_ctx_,_size_,_dma_) dwc_dma_alloc_debug(_ctx_, _size_, \
++						_dma_, __func__, __LINE__)
++#define DWC_DMA_FREE(_ctx_,_size_,_virt_,_dma_) dwc_dma_free_debug(_ctx_, _size_, \
++						 _virt_, _dma_, __func__, __LINE__)
++# endif
++
++#endif /* DWC_DEBUG_MEMORY */
++
++#define dwc_alloc(_ctx_,_size_) DWC_ALLOC(_size_)
++#define dwc_alloc_atomic(_ctx_,_size_) DWC_ALLOC_ATOMIC(_size_)
++#define dwc_free(_ctx_,_addr_) DWC_FREE(_addr_)
++
++#ifdef DWC_LINUX
++/* Linux doesn't need any extra parameters for DMA buffer allocation, so we
++ * just throw away the DMA context parameter.
++ */
++#define dwc_dma_alloc(_ctx_,_size_,_dma_) DWC_DMA_ALLOC(_size_, _dma_)
++#define dwc_dma_alloc_atomic(_ctx_,_size_,_dma_) DWC_DMA_ALLOC_ATOMIC(_size_, _dma_)
++#define dwc_dma_free(_ctx_,_size_,_virt_,_dma_) DWC_DMA_FREE(_size_, _virt_, _dma_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs several extra parameters for DMA buffer allocation, so we pass
++ * them in using the DMA context parameter.
++ */
++#define dwc_dma_alloc DWC_DMA_ALLOC
++#define dwc_dma_free DWC_DMA_FREE
++#endif
++
++
++/** @name Memory and String Processing */
++
++/** memset() clone */
++extern void *DWC_MEMSET(void *dest, uint8_t byte, uint32_t size);
++#define dwc_memset DWC_MEMSET
++
++/** memcpy() clone */
++extern void *DWC_MEMCPY(void *dest, void const *src, uint32_t size);
++#define dwc_memcpy DWC_MEMCPY
++
++/** memmove() clone */
++extern void *DWC_MEMMOVE(void *dest, void *src, uint32_t size);
++#define dwc_memmove DWC_MEMMOVE
++
++/** memcmp() clone */
++extern int DWC_MEMCMP(void *m1, void *m2, uint32_t size);
++#define dwc_memcmp DWC_MEMCMP
++
++/** strcmp() clone */
++extern int DWC_STRCMP(void *s1, void *s2);
++#define dwc_strcmp DWC_STRCMP
++
++/** strncmp() clone */
++extern int DWC_STRNCMP(void *s1, void *s2, uint32_t size);
++#define dwc_strncmp DWC_STRNCMP
++
++/** strlen() clone, for NULL terminated ASCII strings */
++extern int DWC_STRLEN(char const *str);
++#define dwc_strlen DWC_STRLEN
++
++/** strcpy() clone, for NULL terminated ASCII strings */
++extern char *DWC_STRCPY(char *to, const char *from);
++#define dwc_strcpy DWC_STRCPY
++
++/** strdup() clone.  If you wish to use memory allocation debugging, this
++ * implementation of strdup should use the DWC_* memory routines instead of
++ * calling a predefined strdup.  Otherwise the memory allocated by this routine
++ * will not be seen by the debugging routines. */
++extern char *DWC_STRDUP(char const *str);
++#define dwc_strdup(_ctx_,_str_) DWC_STRDUP(_str_)
++
++/** NOT an atoi() clone.  Read the description carefully.  Returns an integer
++ * converted from the string str in base 10 unless the string begins with a "0x"
++ * in which case it is base 16.  String must be a NULL terminated sequence of
++ * ASCII characters and may optionally begin with whitespace, a + or -, and a
++ * "0x" prefix if base 16.  The remaining characters must be valid digits for
++ * the number and end with a NULL character.  If any invalid characters are
++ * encountered or it returns with a negative error code and the results of the
++ * conversion are undefined.  On sucess it returns 0.  Overflow conditions are
++ * undefined.  An example implementation using atoi() can be referenced from the
++ * Linux implementation. */
++extern int DWC_ATOI(const char *str, int32_t *value);
++#define dwc_atoi DWC_ATOI
++
++/** Same as above but for unsigned. */
++extern int DWC_ATOUI(const char *str, uint32_t *value);
++#define dwc_atoui DWC_ATOUI
++
++#ifdef DWC_UTFLIB
++/** This routine returns a UTF16LE unicode encoded string from a UTF8 string. */
++extern int DWC_UTF8_TO_UTF16LE(uint8_t const *utf8string, uint16_t *utf16string, unsigned len);
++#define dwc_utf8_to_utf16le DWC_UTF8_TO_UTF16LE
++#endif
++
++
++/** @name Wait queues
++ *
++ * Wait queues provide a means of synchronizing between threads or processes.  A
++ * process can block on a waitq if some condition is not true, waiting for it to
++ * become true.  When the waitq is triggered all waiting process will get
++ * unblocked and the condition will be check again.  Waitqs should be triggered
++ * every time a condition can potentially change.*/
++struct dwc_waitq;
++
++/** Type for a waitq */
++typedef struct dwc_waitq dwc_waitq_t;
++
++/** The type of waitq condition callback function.  This is called every time
++ * condition is evaluated. */
++typedef int (*dwc_waitq_condition_t)(void *data);
++
++/** Allocate a waitq */
++extern dwc_waitq_t *DWC_WAITQ_ALLOC(void);
++#define dwc_waitq_alloc(_ctx_) DWC_WAITQ_ALLOC()
++
++/** Free a waitq */
++extern void DWC_WAITQ_FREE(dwc_waitq_t *wq);
++#define dwc_waitq_free DWC_WAITQ_FREE
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked, check the
++ * condition again.  The function returns when the condition becomes true.  The return value
++ * is 0 on condition true, DWC_WAITQ_ABORTED on abort or killed, or DWC_WAITQ_UNKNOWN on error. */
++extern int32_t DWC_WAITQ_WAIT(dwc_waitq_t *wq, dwc_waitq_condition_t cond, void *data);
++#define dwc_waitq_wait DWC_WAITQ_WAIT
++
++/** Check the condition and if it is false, block on the waitq.  When unblocked,
++ * check the condition again.  The function returns when the condition become
++ * true or the timeout has passed.  The return value is 0 on condition true or
++ * DWC_TIMED_OUT on timeout, or DWC_WAITQ_ABORTED, or DWC_WAITQ_UNKNOWN on
++ * error. */
++extern int32_t DWC_WAITQ_WAIT_TIMEOUT(dwc_waitq_t *wq, dwc_waitq_condition_t cond,
++				      void *data, int32_t msecs);
++#define dwc_waitq_wait_timeout DWC_WAITQ_WAIT_TIMEOUT
++
++/** Trigger a waitq, unblocking all processes.  This should be called whenever a condition
++ * has potentially changed. */
++extern void DWC_WAITQ_TRIGGER(dwc_waitq_t *wq);
++#define dwc_waitq_trigger DWC_WAITQ_TRIGGER
++
++/** Unblock all processes waiting on the waitq with an ABORTED result. */
++extern void DWC_WAITQ_ABORT(dwc_waitq_t *wq);
++#define dwc_waitq_abort DWC_WAITQ_ABORT
++
++
++/** @name Threads
++ *
++ * A thread must be explicitly stopped.  It must check DWC_THREAD_SHOULD_STOP
++ * whenever it is woken up, and then return.  The DWC_THREAD_STOP function
++ * returns the value from the thread.
++ */
++
++struct dwc_thread;
++
++/** Type for a thread */
++typedef struct dwc_thread dwc_thread_t;
++
++/** The thread function */
++typedef int (*dwc_thread_function_t)(void *data);
++
++/** Create a thread and start it running the thread_function.  Returns a handle
++ * to the thread */
++extern dwc_thread_t *DWC_THREAD_RUN(dwc_thread_function_t func, char *name, void *data);
++#define dwc_thread_run(_ctx_,_func_,_name_,_data_) DWC_THREAD_RUN(_func_, _name_, _data_)
++
++/** Stops a thread.  Return the value returned by the thread.  Or will return
++ * DWC_ABORT if the thread never started. */
++extern int DWC_THREAD_STOP(dwc_thread_t *thread);
++#define dwc_thread_stop DWC_THREAD_STOP
++
++/** Signifies to the thread that it must stop. */
++#ifdef DWC_LINUX
++/* Linux doesn't need any parameters for kthread_should_stop() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(void);
++#define dwc_thread_should_stop(_thrd_) DWC_THREAD_SHOULD_STOP()
++
++/* No thread_exit function in Linux */
++#define dwc_thread_exit(_thrd_)
++#endif
++
++#if defined(DWC_FREEBSD) || defined(DWC_NETBSD)
++/** BSD needs the thread pointer for kthread_suspend_check() */
++extern dwc_bool_t DWC_THREAD_SHOULD_STOP(dwc_thread_t *thread);
++#define dwc_thread_should_stop DWC_THREAD_SHOULD_STOP
++
++/** The thread must call this to exit. */
++extern void DWC_THREAD_EXIT(dwc_thread_t *thread);
++#define dwc_thread_exit DWC_THREAD_EXIT
++#endif
++
++
++/** @name Work queues
++ *
++ * Workqs are used to queue a callback function to be called at some later time,
++ * in another thread. */
++struct dwc_workq;
++
++/** Type for a workq */
++typedef struct dwc_workq dwc_workq_t;
++
++/** The type of the callback function to be called. */
++typedef void (*dwc_work_callback_t)(void *data);
++
++/** Allocate a workq */
++extern dwc_workq_t *DWC_WORKQ_ALLOC(char *name);
++#define dwc_workq_alloc(_ctx_,_name_) DWC_WORKQ_ALLOC(_name_)
++
++/** Free a workq.  All work must be completed before being freed. */
++extern void DWC_WORKQ_FREE(dwc_workq_t *workq);
++#define dwc_workq_free DWC_WORKQ_FREE
++
++/** Schedule a callback on the workq, passing in data.  The function will be
++ * scheduled at some later time. */
++extern void DWC_WORKQ_SCHEDULE(dwc_workq_t *workq, dwc_work_callback_t cb,
++			       void *data, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 4, 5)));
++#else
++	;
++#endif
++#define dwc_workq_schedule DWC_WORKQ_SCHEDULE
++
++/** Schedule a callback on the workq, that will be called until at least
++ * given number miliseconds have passed. */
++extern void DWC_WORKQ_SCHEDULE_DELAYED(dwc_workq_t *workq, dwc_work_callback_t cb,
++				       void *data, uint32_t time, char *format, ...)
++#ifdef __GNUC__
++	__attribute__ ((format(printf, 5, 6)));
++#else
++	;
++#endif
++#define dwc_workq_schedule_delayed DWC_WORKQ_SCHEDULE_DELAYED
++
++/** The number of processes in the workq */
++extern int DWC_WORKQ_PENDING(dwc_workq_t *workq);
++#define dwc_workq_pending DWC_WORKQ_PENDING
++
++/** Blocks until all the work in the workq is complete or timed out.  Returns <
++ * 0 on timeout. */
++extern int DWC_WORKQ_WAIT_WORK_DONE(dwc_workq_t *workq, int timeout);
++#define dwc_workq_wait_work_done DWC_WORKQ_WAIT_WORK_DONE
++
++
++/** @name Tasklets
++ *
++ */
++struct dwc_tasklet;
++
++/** Type for a tasklet */
++typedef struct dwc_tasklet dwc_tasklet_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_tasklet_callback_t)(void *data);
++
++/** Allocates a tasklet */
++extern dwc_tasklet_t *DWC_TASK_ALLOC(char *name, dwc_tasklet_callback_t cb, void *data);
++#define dwc_task_alloc(_ctx_,_name_,_cb_,_data_) DWC_TASK_ALLOC(_name_, _cb_, _data_)
++
++/** Frees a tasklet */
++extern void DWC_TASK_FREE(dwc_tasklet_t *task);
++#define dwc_task_free DWC_TASK_FREE
++
++/** Schedules a tasklet to run */
++extern void DWC_TASK_SCHEDULE(dwc_tasklet_t *task);
++#define dwc_task_schedule DWC_TASK_SCHEDULE
++
++
++/** @name Timer
++ *
++ * Callbacks must be small and atomic.
++ */
++struct dwc_timer;
++
++/** Type for a timer */
++typedef struct dwc_timer dwc_timer_t;
++
++/** The type of the callback function to be called */
++typedef void (*dwc_timer_callback_t)(void *data);
++
++/** Allocates a timer */
++extern dwc_timer_t *DWC_TIMER_ALLOC(char *name, dwc_timer_callback_t cb, void *data);
++#define dwc_timer_alloc(_ctx_,_name_,_cb_,_data_) DWC_TIMER_ALLOC(_name_,_cb_,_data_)
++
++/** Frees a timer */
++extern void DWC_TIMER_FREE(dwc_timer_t *timer);
++#define dwc_timer_free DWC_TIMER_FREE
++
++/** Schedules the timer to run at time ms from now.  And will repeat at every
++ * repeat_interval msec therafter
++ *
++ * Modifies a timer that is still awaiting execution to a new expiration time.
++ * The mod_time is added to the old time.  */
++extern void DWC_TIMER_SCHEDULE(dwc_timer_t *timer, uint32_t time);
++#define dwc_timer_schedule DWC_TIMER_SCHEDULE
++
++/** Disables the timer from execution. */
++extern void DWC_TIMER_CANCEL(dwc_timer_t *timer);
++#define dwc_timer_cancel DWC_TIMER_CANCEL
++
++
++/** @name Spinlocks
++ *
++ * These locks are used when the work between the lock/unlock is atomic and
++ * short.  Interrupts are also disabled during the lock/unlock and thus they are
++ * suitable to lock between interrupt/non-interrupt context.  They also lock
++ * between processes if you have multiple CPUs or Preemption.  If you don't have
++ * multiple CPUS or Preemption, then the you can simply implement the
++ * DWC_SPINLOCK and DWC_SPINUNLOCK to disable and enable interrupts.  Because
++ * the work between the lock/unlock is atomic, the process context will never
++ * change, and so you never have to lock between processes.  */
++
++struct dwc_spinlock;
++
++/** Type for a spinlock */
++typedef struct dwc_spinlock dwc_spinlock_t;
++
++/** Type for the 'flags' argument to spinlock funtions */
++typedef unsigned long dwc_irqflags_t;
++
++/** Returns an initialized lock variable.  This function should allocate and
++ * initialize the OS-specific data structure used for locking.  This data
++ * structure is to be used for the DWC_LOCK and DWC_UNLOCK functions and should
++ * be freed by the DWC_FREE_LOCK when it is no longer used. */
++extern dwc_spinlock_t *DWC_SPINLOCK_ALLOC(void);
++#define dwc_spinlock_alloc(_ctx_) DWC_SPINLOCK_ALLOC()
++
++/** Frees an initialized lock variable. */
++extern void DWC_SPINLOCK_FREE(dwc_spinlock_t *lock);
++#define dwc_spinlock_free(_ctx_,_lock_) DWC_SPINLOCK_FREE(_lock_)
++
++/** Disables interrupts and blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.
++ */
++extern void DWC_SPINLOCK_IRQSAVE(dwc_spinlock_t *lock, dwc_irqflags_t *flags);
++#define dwc_spinlock_irqsave DWC_SPINLOCK_IRQSAVE
++
++/** Re-enables the interrupt and releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ * @param flags Unsigned long for irq flags storage.  Must be the same as was
++ * passed into DWC_LOCK.
++ */
++extern void DWC_SPINUNLOCK_IRQRESTORE(dwc_spinlock_t *lock, dwc_irqflags_t flags);
++#define dwc_spinunlock_irqrestore DWC_SPINUNLOCK_IRQRESTORE
++
++/** Blocks until it acquires the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINLOCK(dwc_spinlock_t *lock);
++#define dwc_spinlock DWC_SPINLOCK
++
++/** Releases the lock.
++ *
++ * @param lock Pointer to the spinlock.
++ */
++extern void DWC_SPINUNLOCK(dwc_spinlock_t *lock);
++#define dwc_spinunlock DWC_SPINUNLOCK
++
++
++/** @name Mutexes
++ *
++ * Unlike spinlocks Mutexes lock only between processes and the work between the
++ * lock/unlock CAN block, therefore it CANNOT be called from interrupt context.
++ */
++
++struct dwc_mutex;
++
++/** Type for a mutex */
++typedef struct dwc_mutex dwc_mutex_t;
++
++/* For Linux Mutex Debugging make it inline because the debugging routines use
++ * the symbol to determine recursive locking.  This makes it falsely think
++ * recursive locking occurs. */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_ALLOC_LINUX_DEBUG(__mutexp) ({ \
++	__mutexp = (dwc_mutex_t *)DWC_ALLOC(sizeof(struct mutex)); \
++	mutex_init((struct mutex *)__mutexp); \
++})
++#endif
++
++/** Allocate a mutex */
++extern dwc_mutex_t *DWC_MUTEX_ALLOC(void);
++#define dwc_mutex_alloc(_ctx_) DWC_MUTEX_ALLOC()
++
++/* For memory leak debugging when using Linux Mutex Debugging */
++#if defined(DWC_LINUX) && defined(CONFIG_DEBUG_MUTEXES)
++#define DWC_MUTEX_FREE(__mutexp) do { \
++	mutex_destroy((struct mutex *)__mutexp); \
++	DWC_FREE(__mutexp); \
++} while(0)
++#else
++/** Free a mutex */
++extern void DWC_MUTEX_FREE(dwc_mutex_t *mutex);
++#define dwc_mutex_free(_ctx_,_mutex_) DWC_MUTEX_FREE(_mutex_)
++#endif
++
++/** Lock a mutex */
++extern void DWC_MUTEX_LOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_lock DWC_MUTEX_LOCK
++
++/** Non-blocking lock returns 1 on successful lock. */
++extern int DWC_MUTEX_TRYLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_trylock DWC_MUTEX_TRYLOCK
++
++/** Unlock a mutex */
++extern void DWC_MUTEX_UNLOCK(dwc_mutex_t *mutex);
++#define dwc_mutex_unlock DWC_MUTEX_UNLOCK
++
++
++/** @name Time */
++
++/** Microsecond delay.
++ *
++ * @param usecs  Microseconds to delay.
++ */
++extern void DWC_UDELAY(uint32_t usecs);
++#define dwc_udelay DWC_UDELAY
++
++/** Millisecond delay.
++ *
++ * @param msecs  Milliseconds to delay.
++ */
++extern void DWC_MDELAY(uint32_t msecs);
++#define dwc_mdelay DWC_MDELAY
++
++/** Non-busy waiting.
++ * Sleeps for specified number of milliseconds.
++ *
++ * @param msecs Milliseconds to sleep.
++ */
++extern void DWC_MSLEEP(uint32_t msecs);
++#define dwc_msleep DWC_MSLEEP
++
++/**
++ * Returns number of milliseconds since boot.
++ */
++extern uint32_t DWC_TIME(void);
++#define dwc_time DWC_TIME
++
++
++
++
++/* @mainpage DWC Portability and Common Library
++ *
++ * This is the documentation for the DWC Portability and Common Library.
++ *
++ * @section intro Introduction
++ *
++ * The DWC Portability library consists of wrapper calls and data structures to
++ * all low-level functions which are typically provided by the OS.  The WUDEV
++ * driver uses only these functions.  In order to port the WUDEV driver, only
++ * the functions in this library need to be re-implemented, with the same
++ * behavior as documented here.
++ *
++ * The Common library consists of higher level functions, which rely only on
++ * calling the functions from the DWC Portability library.  These common
++ * routines are shared across modules.  Some of the common libraries need to be
++ * used directly by the driver programmer when porting WUDEV.  Such as the
++ * parameter and notification libraries.
++ *
++ * @section low Portability Library OS Wrapper Functions
++ *
++ * Any function starting with DWC and in all CAPS is a low-level OS-wrapper that
++ * needs to be implemented when porting, for example DWC_MUTEX_ALLOC().  All of
++ * these functions are included in the dwc_os.h file.
++ *
++ * There are many functions here covering a wide array of OS services.  Please
++ * see dwc_os.h for details, and implementation notes for each function.
++ *
++ * @section common Common Library Functions
++ *
++ * Any function starting with dwc and in all lowercase is a common library
++ * routine.  These functions have a portable implementation and do not need to
++ * be reimplemented when porting.  The common routines can be used by any
++ * driver, and some must be used by the end user to control the drivers.  For
++ * example, you must use the Parameter common library in order to set the
++ * parameters in the WUDEV module.
++ *
++ * The common libraries consist of the following:
++ *
++ * - Connection Contexts - Used internally and can be used by end-user.  See dwc_cc.h
++ * - Parameters - Used internally and can be used by end-user.  See dwc_params.h
++ * - Notifications - Used internally and can be used by end-user.  See dwc_notifier.h
++ * - Lists - Used internally and can be used by end-user.  See dwc_list.h
++ * - Memory Debugging - Used internally and can be used by end-user.  See dwc_os.h
++ * - Modpow - Used internally only.  See dwc_modpow.h
++ * - DH - Used internally only.  See dwc_dh.h
++ * - Crypto - Used internally only.  See dwc_crypto.h
++ *
++ *
++ * @section prereq Prerequistes For dwc_os.h
++ * @subsection types Data Types
++ *
++ * The dwc_os.h file assumes that several low-level data types are pre defined for the
++ * compilation environment.  These data types are:
++ *
++ * - uint8_t - unsigned 8-bit data type
++ * - int8_t - signed 8-bit data type
++ * - uint16_t - unsigned 16-bit data type
++ * - int16_t - signed 16-bit data type
++ * - uint32_t - unsigned 32-bit data type
++ * - int32_t - signed 32-bit data type
++ * - uint64_t - unsigned 64-bit data type
++ * - int64_t - signed 64-bit data type
++ *
++ * Ensure that these are defined before using dwc_os.h.  The easiest way to do
++ * that is to modify the top of the file to include the appropriate header.
++ * This is already done for the Linux environment.  If the DWC_LINUX macro is
++ * defined, the correct header will be added.  A standard header <stdint.h> is
++ * also used for environments where standard C headers are available.
++ *
++ * @subsection stdarg Variable Arguments
++ *
++ * Variable arguments are provided by a standard C header <stdarg.h>.  it is
++ * available in Both the Linux and ANSI C enviornment.  An equivalent must be
++ * provided in your enviornment in order to use dwc_os.h with the debug and
++ * tracing message functionality.
++ *
++ * @subsection thread Threading
++ *
++ * WUDEV Core must be run on an operating system that provides for multiple
++ * threads/processes.  Threading can be implemented in many ways, even in
++ * embedded systems without an operating system.  At the bare minimum, the
++ * system should be able to start any number of processes at any time to handle
++ * special work.  It need not be a pre-emptive system.  Process context can
++ * change upon a call to a blocking function.  The hardware interrupt context
++ * that calls the module's ISR() function must be differentiable from process
++ * context, even if your processes are impemented via a hardware interrupt.
++ * Further locking mechanism between process must exist (or be implemented), and
++ * process context must have a way to disable interrupts for a period of time to
++ * lock them out.  If all of this exists, the functions in dwc_os.h related to
++ * threading should be able to be implemented with the defined behavior.
++ *
++ */
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _DWC_OS_H_ */
+diff --git a/drivers/usb/host/dwc_common_port/usb.h b/drivers/usb/host/dwc_common_port/usb.h
+new file mode 100644
+index 0000000..27bda82
+--- /dev/null
++++ b/drivers/usb/host/dwc_common_port/usb.h
+@@ -0,0 +1,946 @@
++/*
++ * Copyright (c) 1998 The NetBSD Foundation, Inc.
++ * All rights reserved.
++ *
++ * This code is derived from software contributed to The NetBSD Foundation
++ * by Lennart Augustsson (lennart@augustsson.net) at
++ * Carlstedt Research & Technology.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions and the following disclaimer.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. All advertising materials mentioning features or use of this software
++ *    must display the following acknowledgement:
++ *        This product includes software developed by the NetBSD
++ *        Foundation, Inc. and its contributors.
++ * 4. Neither the name of The NetBSD Foundation nor the names of its
++ *    contributors may be used to endorse or promote products derived
++ *    from this software without specific prior written permission.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
++ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
++ * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
++ * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
++ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
++ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
++ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
++ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
++ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
++ * POSSIBILITY OF SUCH DAMAGE.
++ */
++
++/* Modified by Synopsys, Inc, 12/12/2007 */
++
++
++#ifndef _USB_H_
++#define _USB_H_
++
++#ifdef __cplusplus
++extern "C" {
++#endif
++
++/*
++ * The USB records contain some unaligned little-endian word
++ * components.  The U[SG]ETW macros take care of both the alignment
++ * and endian problem and should always be used to access non-byte
++ * values.
++ */
++typedef u_int8_t uByte;
++typedef u_int8_t uWord[2];
++typedef u_int8_t uDWord[4];
++
++#define USETW2(w,h,l) ((w)[0] = (u_int8_t)(l), (w)[1] = (u_int8_t)(h))
++#define UCONSTW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff }
++#define UCONSTDW(x)	{ (x) & 0xff, ((x) >> 8) & 0xff, \
++			  ((x) >> 16) & 0xff, ((x) >> 24) & 0xff }
++
++#if 1
++#define UGETW(w) ((w)[0] | ((w)[1] << 8))
++#define USETW(w,v) ((w)[0] = (u_int8_t)(v), (w)[1] = (u_int8_t)((v) >> 8))
++#define UGETDW(w) ((w)[0] | ((w)[1] << 8) | ((w)[2] << 16) | ((w)[3] << 24))
++#define USETDW(w,v) ((w)[0] = (u_int8_t)(v), \
++		     (w)[1] = (u_int8_t)((v) >> 8), \
++		     (w)[2] = (u_int8_t)((v) >> 16), \
++		     (w)[3] = (u_int8_t)((v) >> 24))
++#else
++/*
++ * On little-endian machines that can handle unanliged accesses
++ * (e.g. i386) these macros can be replaced by the following.
++ */
++#define UGETW(w) (*(u_int16_t *)(w))
++#define USETW(w,v) (*(u_int16_t *)(w) = (v))
++#define UGETDW(w) (*(u_int32_t *)(w))
++#define USETDW(w,v) (*(u_int32_t *)(w) = (v))
++#endif
++
++/*
++ * Macros for accessing UAS IU fields, which are big-endian
++ */
++#define IUSETW2(w,h,l) ((w)[0] = (u_int8_t)(h), (w)[1] = (u_int8_t)(l))
++#define IUCONSTW(x)	{ ((x) >> 8) & 0xff, (x) & 0xff }
++#define IUCONSTDW(x)	{ ((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
++			((x) >> 8) & 0xff, (x) & 0xff }
++#define IUGETW(w) (((w)[0] << 8) | (w)[1])
++#define IUSETW(w,v) ((w)[0] = (u_int8_t)((v) >> 8), (w)[1] = (u_int8_t)(v))
++#define IUGETDW(w) (((w)[0] << 24) | ((w)[1] << 16) | ((w)[2] << 8) | (w)[3])
++#define IUSETDW(w,v) ((w)[0] = (u_int8_t)((v) >> 24), \
++		      (w)[1] = (u_int8_t)((v) >> 16), \
++		      (w)[2] = (u_int8_t)((v) >> 8), \
++		      (w)[3] = (u_int8_t)(v))
++
++#define UPACKED __attribute__((__packed__))
++
++typedef struct {
++	uByte		bmRequestType;
++	uByte		bRequest;
++	uWord		wValue;
++	uWord		wIndex;
++	uWord		wLength;
++} UPACKED usb_device_request_t;
++
++#define UT_GET_DIR(a) ((a) & 0x80)
++#define UT_WRITE		0x00
++#define UT_READ			0x80
++
++#define UT_GET_TYPE(a) ((a) & 0x60)
++#define UT_STANDARD		0x00
++#define UT_CLASS		0x20
++#define UT_VENDOR		0x40
++
++#define UT_GET_RECIPIENT(a) ((a) & 0x1f)
++#define UT_DEVICE		0x00
++#define UT_INTERFACE		0x01
++#define UT_ENDPOINT		0x02
++#define UT_OTHER		0x03
++
++#define UT_READ_DEVICE		(UT_READ  | UT_STANDARD | UT_DEVICE)
++#define UT_READ_INTERFACE	(UT_READ  | UT_STANDARD | UT_INTERFACE)
++#define UT_READ_ENDPOINT	(UT_READ  | UT_STANDARD | UT_ENDPOINT)
++#define UT_WRITE_DEVICE		(UT_WRITE | UT_STANDARD | UT_DEVICE)
++#define UT_WRITE_INTERFACE	(UT_WRITE | UT_STANDARD | UT_INTERFACE)
++#define UT_WRITE_ENDPOINT	(UT_WRITE | UT_STANDARD | UT_ENDPOINT)
++#define UT_READ_CLASS_DEVICE	(UT_READ  | UT_CLASS | UT_DEVICE)
++#define UT_READ_CLASS_INTERFACE	(UT_READ  | UT_CLASS | UT_INTERFACE)
++#define UT_READ_CLASS_OTHER	(UT_READ  | UT_CLASS | UT_OTHER)
++#define UT_READ_CLASS_ENDPOINT	(UT_READ  | UT_CLASS | UT_ENDPOINT)
++#define UT_WRITE_CLASS_DEVICE	(UT_WRITE | UT_CLASS | UT_DEVICE)
++#define UT_WRITE_CLASS_INTERFACE (UT_WRITE | UT_CLASS | UT_INTERFACE)
++#define UT_WRITE_CLASS_OTHER	(UT_WRITE | UT_CLASS | UT_OTHER)
++#define UT_WRITE_CLASS_ENDPOINT	(UT_WRITE | UT_CLASS | UT_ENDPOINT)
++#define UT_READ_VENDOR_DEVICE	(UT_READ  | UT_VENDOR | UT_DEVICE)
++#define UT_READ_VENDOR_INTERFACE (UT_READ  | UT_VENDOR | UT_INTERFACE)
++#define UT_READ_VENDOR_OTHER	(UT_READ  | UT_VENDOR | UT_OTHER)
++#define UT_READ_VENDOR_ENDPOINT	(UT_READ  | UT_VENDOR | UT_ENDPOINT)
++#define UT_WRITE_VENDOR_DEVICE	(UT_WRITE | UT_VENDOR | UT_DEVICE)
++#define UT_WRITE_VENDOR_INTERFACE (UT_WRITE | UT_VENDOR | UT_INTERFACE)
++#define UT_WRITE_VENDOR_OTHER	(UT_WRITE | UT_VENDOR | UT_OTHER)
++#define UT_WRITE_VENDOR_ENDPOINT (UT_WRITE | UT_VENDOR | UT_ENDPOINT)
++
++/* Requests */
++#define UR_GET_STATUS		0x00
++#define  USTAT_STANDARD_STATUS  0x00
++#define  WUSTAT_WUSB_FEATURE    0x01
++#define  WUSTAT_CHANNEL_INFO    0x02
++#define  WUSTAT_RECEIVED_DATA   0x03
++#define  WUSTAT_MAS_AVAILABILITY 0x04
++#define  WUSTAT_CURRENT_TRANSMIT_POWER 0x05
++#define UR_CLEAR_FEATURE	0x01
++#define UR_SET_FEATURE		0x03
++#define UR_SET_AND_TEST_FEATURE 0x0c
++#define UR_SET_ADDRESS		0x05
++#define UR_GET_DESCRIPTOR	0x06
++#define  UDESC_DEVICE		0x01
++#define  UDESC_CONFIG		0x02
++#define  UDESC_STRING		0x03
++#define  UDESC_INTERFACE	0x04
++#define  UDESC_ENDPOINT		0x05
++#define  UDESC_SS_USB_COMPANION	0x30
++#define  UDESC_DEVICE_QUALIFIER	0x06
++#define  UDESC_OTHER_SPEED_CONFIGURATION 0x07
++#define  UDESC_INTERFACE_POWER	0x08
++#define  UDESC_OTG		0x09
++#define  WUDESC_SECURITY	0x0c
++#define  WUDESC_KEY		0x0d
++#define   WUD_GET_KEY_INDEX(_wValue_) ((_wValue_) & 0xf)
++#define   WUD_GET_KEY_TYPE(_wValue_) (((_wValue_) & 0x30) >> 4)
++#define    WUD_KEY_TYPE_ASSOC    0x01
++#define    WUD_KEY_TYPE_GTK      0x02
++#define   WUD_GET_KEY_ORIGIN(_wValue_) (((_wValue_) & 0x40) >> 6)
++#define    WUD_KEY_ORIGIN_HOST   0x00
++#define    WUD_KEY_ORIGIN_DEVICE 0x01
++#define  WUDESC_ENCRYPTION_TYPE	0x0e
++#define  WUDESC_BOS		0x0f
++#define  WUDESC_DEVICE_CAPABILITY 0x10
++#define  WUDESC_WIRELESS_ENDPOINT_COMPANION 0x11
++#define  UDESC_BOS		0x0f
++#define  UDESC_DEVICE_CAPABILITY 0x10
++#define  UDESC_CS_DEVICE	0x21	/* class specific */
++#define  UDESC_CS_CONFIG	0x22
++#define  UDESC_CS_STRING	0x23
++#define  UDESC_CS_INTERFACE	0x24
++#define  UDESC_CS_ENDPOINT	0x25
++#define  UDESC_HUB		0x29
++#define UR_SET_DESCRIPTOR	0x07
++#define UR_GET_CONFIG		0x08
++#define UR_SET_CONFIG		0x09
++#define UR_GET_INTERFACE	0x0a
++#define UR_SET_INTERFACE	0x0b
++#define UR_SYNCH_FRAME		0x0c
++#define WUR_SET_ENCRYPTION      0x0d
++#define WUR_GET_ENCRYPTION	0x0e
++#define WUR_SET_HANDSHAKE	0x0f
++#define WUR_GET_HANDSHAKE	0x10
++#define WUR_SET_CONNECTION	0x11
++#define WUR_SET_SECURITY_DATA	0x12
++#define WUR_GET_SECURITY_DATA	0x13
++#define WUR_SET_WUSB_DATA	0x14
++#define  WUDATA_DRPIE_INFO	0x01
++#define  WUDATA_TRANSMIT_DATA	0x02
++#define  WUDATA_TRANSMIT_PARAMS	0x03
++#define  WUDATA_RECEIVE_PARAMS	0x04
++#define  WUDATA_TRANSMIT_POWER	0x05
++#define WUR_LOOPBACK_DATA_WRITE	0x15
++#define WUR_LOOPBACK_DATA_READ	0x16
++#define WUR_SET_INTERFACE_DS	0x17
++
++/* Feature numbers */
++#define UF_ENDPOINT_HALT	0
++#define UF_DEVICE_REMOTE_WAKEUP	1
++#define UF_TEST_MODE		2
++#define UF_DEVICE_B_HNP_ENABLE	3
++#define UF_DEVICE_A_HNP_SUPPORT	4
++#define UF_DEVICE_A_ALT_HNP_SUPPORT 5
++#define WUF_WUSB		3
++#define  WUF_TX_DRPIE		0x0
++#define  WUF_DEV_XMIT_PACKET	0x1
++#define  WUF_COUNT_PACKETS	0x2
++#define  WUF_CAPTURE_PACKETS	0x3
++#define UF_FUNCTION_SUSPEND	0
++#define UF_U1_ENABLE		48
++#define UF_U2_ENABLE		49
++#define UF_LTM_ENABLE		50
++
++/* Class requests from the USB 2.0 hub spec, table 11-15 */
++#define UCR_CLEAR_HUB_FEATURE		(0x2000 | UR_CLEAR_FEATURE)
++#define UCR_CLEAR_PORT_FEATURE		(0x2300 | UR_CLEAR_FEATURE)
++#define UCR_GET_HUB_DESCRIPTOR		(0xa000 | UR_GET_DESCRIPTOR)
++#define UCR_GET_HUB_STATUS		(0xa000 | UR_GET_STATUS)
++#define UCR_GET_PORT_STATUS		(0xa300 | UR_GET_STATUS)
++#define UCR_SET_HUB_FEATURE		(0x2000 | UR_SET_FEATURE)
++#define UCR_SET_PORT_FEATURE		(0x2300 | UR_SET_FEATURE)
++#define UCR_SET_AND_TEST_PORT_FEATURE	(0xa300 | UR_SET_AND_TEST_FEATURE)
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bDescriptorSubtype;
++} UPACKED usb_descriptor_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++} UPACKED usb_descriptor_header_t;
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++#define UD_USB_2_0		0x0200
++#define UD_IS_USB2(d) (UGETW((d)->bcdUSB) >= UD_USB_2_0)
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize;
++	/* The fields below are not part of the initial descriptor. */
++	uWord		idVendor;
++	uWord		idProduct;
++	uWord		bcdDevice;
++	uByte		iManufacturer;
++	uByte		iProduct;
++	uByte		iSerialNumber;
++	uByte		bNumConfigurations;
++} UPACKED usb_device_descriptor_t;
++#define USB_DEVICE_DESCRIPTOR_SIZE 18
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		wTotalLength;
++	uByte		bNumInterface;
++	uByte		bConfigurationValue;
++	uByte		iConfiguration;
++#define UC_ATT_ONE		(1 << 7)	/* must be set */
++#define UC_ATT_SELFPOWER	(1 << 6)	/* self powered */
++#define UC_ATT_WAKEUP		(1 << 5)	/* can wakeup */
++#define UC_ATT_BATTERY		(1 << 4)	/* battery powered */
++	uByte		bmAttributes;
++#define UC_BUS_POWERED		0x80
++#define UC_SELF_POWERED		0x40
++#define UC_REMOTE_WAKEUP	0x20
++	uByte		bMaxPower; /* max current in 2 mA units */
++#define UC_POWER_FACTOR 2
++} UPACKED usb_config_descriptor_t;
++#define USB_CONFIG_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bInterfaceNumber;
++	uByte		bAlternateSetting;
++	uByte		bNumEndpoints;
++	uByte		bInterfaceClass;
++	uByte		bInterfaceSubClass;
++	uByte		bInterfaceProtocol;
++	uByte		iInterface;
++} UPACKED usb_interface_descriptor_t;
++#define USB_INTERFACE_DESCRIPTOR_SIZE 9
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bEndpointAddress;
++#define UE_GET_DIR(a)	((a) & 0x80)
++#define UE_SET_DIR(a,d)	((a) | (((d)&1) << 7))
++#define UE_DIR_IN	0x80
++#define UE_DIR_OUT	0x00
++#define UE_ADDR		0x0f
++#define UE_GET_ADDR(a)	((a) & UE_ADDR)
++	uByte		bmAttributes;
++#define UE_XFERTYPE	0x03
++#define  UE_CONTROL	0x00
++#define  UE_ISOCHRONOUS	0x01
++#define  UE_BULK	0x02
++#define  UE_INTERRUPT	0x03
++#define UE_GET_XFERTYPE(a)	((a) & UE_XFERTYPE)
++#define UE_ISO_TYPE	0x0c
++#define  UE_ISO_ASYNC	0x04
++#define  UE_ISO_ADAPT	0x08
++#define  UE_ISO_SYNC	0x0c
++#define UE_GET_ISO_TYPE(a)	((a) & UE_ISO_TYPE)
++	uWord		wMaxPacketSize;
++	uByte		bInterval;
++} UPACKED usb_endpoint_descriptor_t;
++#define USB_ENDPOINT_DESCRIPTOR_SIZE 7
++
++typedef struct ss_endpoint_companion_descriptor {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++#define USSE_GET_MAX_STREAMS(a)		((a) & 0x1f)
++#define USSE_SET_MAX_STREAMS(a, b)	((a) | ((b) & 0x1f))
++#define USSE_GET_MAX_PACKET_NUM(a)	((a) & 0x03)
++#define USSE_SET_MAX_PACKET_NUM(a, b)	((a) | ((b) & 0x03))
++	uByte bmAttributes;
++	uWord wBytesPerInterval;
++} UPACKED ss_endpoint_companion_descriptor_t;
++#define USB_SS_ENDPOINT_COMPANION_DESCRIPTOR_SIZE 6
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bString[127];
++} UPACKED usb_string_descriptor_t;
++#define USB_MAX_STRING_LEN 128
++#define USB_LANGUAGE_TABLE 0	/* # of the string language id table */
++
++/* Hub specific request */
++#define UR_GET_BUS_STATE	0x02
++#define UR_CLEAR_TT_BUFFER	0x08
++#define UR_RESET_TT		0x09
++#define UR_GET_TT_STATE		0x0a
++#define UR_STOP_TT		0x0b
++
++/* Hub features */
++#define UHF_C_HUB_LOCAL_POWER	0
++#define UHF_C_HUB_OVER_CURRENT	1
++#define UHF_PORT_CONNECTION	0
++#define UHF_PORT_ENABLE		1
++#define UHF_PORT_SUSPEND	2
++#define UHF_PORT_OVER_CURRENT	3
++#define UHF_PORT_RESET		4
++#define UHF_PORT_L1		5
++#define UHF_PORT_POWER		8
++#define UHF_PORT_LOW_SPEED	9
++#define UHF_PORT_HIGH_SPEED	10
++#define UHF_C_PORT_CONNECTION	16
++#define UHF_C_PORT_ENABLE	17
++#define UHF_C_PORT_SUSPEND	18
++#define UHF_C_PORT_OVER_CURRENT	19
++#define UHF_C_PORT_RESET	20
++#define UHF_C_PORT_L1		23
++#define UHF_PORT_TEST		21
++#define UHF_PORT_INDICATOR	22
++
++typedef struct {
++	uByte		bDescLength;
++	uByte		bDescriptorType;
++	uByte		bNbrPorts;
++	uWord		wHubCharacteristics;
++#define UHD_PWR			0x0003
++#define  UHD_PWR_GANGED		0x0000
++#define  UHD_PWR_INDIVIDUAL	0x0001
++#define  UHD_PWR_NO_SWITCH	0x0002
++#define UHD_COMPOUND		0x0004
++#define UHD_OC			0x0018
++#define  UHD_OC_GLOBAL		0x0000
++#define  UHD_OC_INDIVIDUAL	0x0008
++#define  UHD_OC_NONE		0x0010
++#define UHD_TT_THINK		0x0060
++#define  UHD_TT_THINK_8		0x0000
++#define  UHD_TT_THINK_16	0x0020
++#define  UHD_TT_THINK_24	0x0040
++#define  UHD_TT_THINK_32	0x0060
++#define UHD_PORT_IND		0x0080
++	uByte		bPwrOn2PwrGood;	/* delay in 2 ms units */
++#define UHD_PWRON_FACTOR 2
++	uByte		bHubContrCurrent;
++	uByte		DeviceRemovable[32]; /* max 255 ports */
++#define UHD_NOT_REMOV(desc, i) \
++    (((desc)->DeviceRemovable[(i)/8] >> ((i) % 8)) & 1)
++	/* deprecated */ uByte		PortPowerCtrlMask[1];
++} UPACKED usb_hub_descriptor_t;
++#define USB_HUB_DESCRIPTOR_SIZE 9 /* includes deprecated PortPowerCtrlMask */
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uWord		bcdUSB;
++	uByte		bDeviceClass;
++	uByte		bDeviceSubClass;
++	uByte		bDeviceProtocol;
++	uByte		bMaxPacketSize0;
++	uByte		bNumConfigurations;
++	uByte		bReserved;
++} UPACKED usb_device_qualifier_t;
++#define USB_DEVICE_QUALIFIER_SIZE 10
++
++typedef struct {
++	uByte		bLength;
++	uByte		bDescriptorType;
++	uByte		bmAttributes;
++#define UOTG_SRP	0x01
++#define UOTG_HNP	0x02
++} UPACKED usb_otg_descriptor_t;
++
++/* OTG feature selectors */
++#define UOTG_B_HNP_ENABLE	3
++#define UOTG_A_HNP_SUPPORT	4
++#define UOTG_A_ALT_HNP_SUPPORT	5
++
++typedef struct {
++	uWord		wStatus;
++/* Device status flags */
++#define UDS_SELF_POWERED		0x0001
++#define UDS_REMOTE_WAKEUP		0x0002
++/* Endpoint status flags */
++#define UES_HALT			0x0001
++} UPACKED usb_status_t;
++
++typedef struct {
++	uWord		wHubStatus;
++#define UHS_LOCAL_POWER			0x0001
++#define UHS_OVER_CURRENT		0x0002
++	uWord		wHubChange;
++} UPACKED usb_hub_status_t;
++
++typedef struct {
++	uWord		wPortStatus;
++#define UPS_CURRENT_CONNECT_STATUS	0x0001
++#define UPS_PORT_ENABLED		0x0002
++#define UPS_SUSPEND			0x0004
++#define UPS_OVERCURRENT_INDICATOR	0x0008
++#define UPS_RESET			0x0010
++#define UPS_PORT_POWER			0x0100
++#define UPS_LOW_SPEED			0x0200
++#define UPS_HIGH_SPEED			0x0400
++#define UPS_PORT_TEST			0x0800
++#define UPS_PORT_INDICATOR		0x1000
++	uWord		wPortChange;
++#define UPS_C_CONNECT_STATUS		0x0001
++#define UPS_C_PORT_ENABLED		0x0002
++#define UPS_C_SUSPEND			0x0004
++#define UPS_C_OVERCURRENT_INDICATOR	0x0008
++#define UPS_C_PORT_RESET		0x0010
++} UPACKED usb_port_status_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++/* Device class codes */
++#define UDCLASS_IN_INTERFACE	0x00
++#define UDCLASS_COMM		0x02
++#define UDCLASS_HUB		0x09
++#define  UDSUBCLASS_HUB		0x00
++#define  UDPROTO_FSHUB		0x00
++#define  UDPROTO_HSHUBSTT	0x01
++#define  UDPROTO_HSHUBMTT	0x02
++#define UDCLASS_DIAGNOSTIC	0xdc
++#define UDCLASS_WIRELESS	0xe0
++#define  UDSUBCLASS_RF		0x01
++#define   UDPROTO_BLUETOOTH	0x01
++#define UDCLASS_VENDOR		0xff
++
++/* Interface class codes */
++#define UICLASS_UNSPEC		0x00
++
++#define UICLASS_AUDIO		0x01
++#define  UISUBCLASS_AUDIOCONTROL	1
++#define  UISUBCLASS_AUDIOSTREAM		2
++#define  UISUBCLASS_MIDISTREAM		3
++
++#define UICLASS_CDC		0x02 /* communication */
++#define  UISUBCLASS_DIRECT_LINE_CONTROL_MODEL	1
++#define  UISUBCLASS_ABSTRACT_CONTROL_MODEL	2
++#define  UISUBCLASS_TELEPHONE_CONTROL_MODEL	3
++#define  UISUBCLASS_MULTICHANNEL_CONTROL_MODEL	4
++#define  UISUBCLASS_CAPI_CONTROLMODEL		5
++#define  UISUBCLASS_ETHERNET_NETWORKING_CONTROL_MODEL 6
++#define  UISUBCLASS_ATM_NETWORKING_CONTROL_MODEL 7
++#define   UIPROTO_CDC_AT			1
++
++#define UICLASS_HID		0x03
++#define  UISUBCLASS_BOOT	1
++#define  UIPROTO_BOOT_KEYBOARD	1
++
++#define UICLASS_PHYSICAL	0x05
++
++#define UICLASS_IMAGE		0x06
++
++#define UICLASS_PRINTER		0x07
++#define  UISUBCLASS_PRINTER	1
++#define  UIPROTO_PRINTER_UNI	1
++#define  UIPROTO_PRINTER_BI	2
++#define  UIPROTO_PRINTER_1284	3
++
++#define UICLASS_MASS		0x08
++#define  UISUBCLASS_RBC		1
++#define  UISUBCLASS_SFF8020I	2
++#define  UISUBCLASS_QIC157	3
++#define  UISUBCLASS_UFI		4
++#define  UISUBCLASS_SFF8070I	5
++#define  UISUBCLASS_SCSI	6
++#define  UIPROTO_MASS_CBI_I	0
++#define  UIPROTO_MASS_CBI	1
++#define  UIPROTO_MASS_BBB_OLD	2	/* Not in the spec anymore */
++#define  UIPROTO_MASS_BBB	80	/* 'P' for the Iomega Zip drive */
++
++#define UICLASS_HUB		0x09
++#define  UISUBCLASS_HUB		0
++#define  UIPROTO_FSHUB		0
++#define  UIPROTO_HSHUBSTT	0 /* Yes, same as previous */
++#define  UIPROTO_HSHUBMTT	1
++
++#define UICLASS_CDC_DATA	0x0a
++#define  UISUBCLASS_DATA		0
++#define   UIPROTO_DATA_ISDNBRI		0x30    /* Physical iface */
++#define   UIPROTO_DATA_HDLC		0x31    /* HDLC */
++#define   UIPROTO_DATA_TRANSPARENT	0x32    /* Transparent */
++#define   UIPROTO_DATA_Q921M		0x50    /* Management for Q921 */
++#define   UIPROTO_DATA_Q921		0x51    /* Data for Q921 */
++#define   UIPROTO_DATA_Q921TM		0x52    /* TEI multiplexer for Q921 */
++#define   UIPROTO_DATA_V42BIS		0x90    /* Data compression */
++#define   UIPROTO_DATA_Q931		0x91    /* Euro-ISDN */
++#define   UIPROTO_DATA_V120		0x92    /* V.24 rate adaption */
++#define   UIPROTO_DATA_CAPI		0x93    /* CAPI 2.0 commands */
++#define   UIPROTO_DATA_HOST_BASED	0xfd    /* Host based driver */
++#define   UIPROTO_DATA_PUF		0xfe    /* see Prot. Unit Func. Desc.*/
++#define   UIPROTO_DATA_VENDOR		0xff    /* Vendor specific */
++
++#define UICLASS_SMARTCARD	0x0b
++
++/*#define UICLASS_FIRM_UPD	0x0c*/
++
++#define UICLASS_SECURITY	0x0d
++
++#define UICLASS_DIAGNOSTIC	0xdc
++
++#define UICLASS_WIRELESS	0xe0
++#define  UISUBCLASS_RF			0x01
++#define   UIPROTO_BLUETOOTH		0x01
++
++#define UICLASS_APPL_SPEC	0xfe
++#define  UISUBCLASS_FIRMWARE_DOWNLOAD	1
++#define  UISUBCLASS_IRDA		2
++#define  UIPROTO_IRDA			0
++
++#define UICLASS_VENDOR		0xff
++
++#define USB_HUB_MAX_DEPTH 5
++
++/*
++ * Minimum time a device needs to be powered down to go through
++ * a power cycle.  XXX Are these time in the spec?
++ */
++#define USB_POWER_DOWN_TIME	200 /* ms */
++#define USB_PORT_POWER_DOWN_TIME	100 /* ms */
++
++#if 0
++/* These are the values from the spec. */
++#define USB_PORT_RESET_DELAY	10  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 50  /* ms */
++#define USB_PORT_RESET_RECOVERY	10  /* ms */
++#define USB_PORT_POWERUP_DELAY	100 /* ms */
++#define USB_SET_ADDRESS_SETTLE	2   /* ms */
++#define USB_RESUME_DELAY	(20*5)  /* ms */
++#define USB_RESUME_WAIT		10  /* ms */
++#define USB_RESUME_RECOVERY	10  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	0   /* ms */
++#else
++/* Allow for marginal (i.e. non-conforming) devices. */
++#define USB_PORT_RESET_DELAY	50  /* ms */
++#define USB_PORT_ROOT_RESET_DELAY 250  /* ms */
++#define USB_PORT_RESET_RECOVERY	250  /* ms */
++#define USB_PORT_POWERUP_DELAY	300 /* ms */
++#define USB_SET_ADDRESS_SETTLE	10  /* ms */
++#define USB_RESUME_DELAY	(50*5)  /* ms */
++#define USB_RESUME_WAIT		50  /* ms */
++#define USB_RESUME_RECOVERY	50  /* ms */
++#define USB_EXTRA_POWER_UP_TIME	20  /* ms */
++#endif
++
++#define USB_MIN_POWER		100 /* mA */
++#define USB_MAX_POWER		500 /* mA */
++
++#define USB_BUS_RESET_DELAY	100 /* ms XXX?*/
++
++#define USB_UNCONFIG_NO 0
++#define USB_UNCONFIG_INDEX (-1)
++
++/*** ioctl() related stuff ***/
++
++struct usb_ctl_request {
++	int	ucr_addr;
++	usb_device_request_t ucr_request;
++	void	*ucr_data;
++	int	ucr_flags;
++#define USBD_SHORT_XFER_OK	0x04	/* allow short reads */
++	int	ucr_actlen;		/* actual length transferred */
++};
++
++struct usb_alt_interface {
++	int	uai_config_index;
++	int	uai_interface_index;
++	int	uai_alt_no;
++};
++
++#define USB_CURRENT_CONFIG_INDEX (-1)
++#define USB_CURRENT_ALT_INDEX (-1)
++
++struct usb_config_desc {
++	int	ucd_config_index;
++	usb_config_descriptor_t ucd_desc;
++};
++
++struct usb_interface_desc {
++	int	uid_config_index;
++	int	uid_interface_index;
++	int	uid_alt_index;
++	usb_interface_descriptor_t uid_desc;
++};
++
++struct usb_endpoint_desc {
++	int	ued_config_index;
++	int	ued_interface_index;
++	int	ued_alt_index;
++	int	ued_endpoint_index;
++	usb_endpoint_descriptor_t ued_desc;
++};
++
++struct usb_full_desc {
++	int	ufd_config_index;
++	u_int	ufd_size;
++	u_char	*ufd_data;
++};
++
++struct usb_string_desc {
++	int	usd_string_index;
++	int	usd_language_id;
++	usb_string_descriptor_t usd_desc;
++};
++
++struct usb_ctl_report_desc {
++	int	ucrd_size;
++	u_char	ucrd_data[1024];	/* filled data size will vary */
++};
++
++typedef struct { u_int32_t cookie; } usb_event_cookie_t;
++
++#define USB_MAX_DEVNAMES 4
++#define USB_MAX_DEVNAMELEN 16
++struct usb_device_info {
++	u_int8_t	udi_bus;
++	u_int8_t	udi_addr;	/* device address */
++	usb_event_cookie_t udi_cookie;
++	char		udi_product[USB_MAX_STRING_LEN];
++	char		udi_vendor[USB_MAX_STRING_LEN];
++	char		udi_release[8];
++	u_int16_t	udi_productNo;
++	u_int16_t	udi_vendorNo;
++	u_int16_t	udi_releaseNo;
++	u_int8_t	udi_class;
++	u_int8_t	udi_subclass;
++	u_int8_t	udi_protocol;
++	u_int8_t	udi_config;
++	u_int8_t	udi_speed;
++#define USB_SPEED_UNKNOWN	0
++#define USB_SPEED_LOW		1
++#define USB_SPEED_FULL		2
++#define USB_SPEED_HIGH		3
++#define USB_SPEED_VARIABLE	4
++#define USB_SPEED_SUPER		5
++	int		udi_power;	/* power consumption in mA, 0 if selfpowered */
++	int		udi_nports;
++	char		udi_devnames[USB_MAX_DEVNAMES][USB_MAX_DEVNAMELEN];
++	u_int8_t	udi_ports[16];/* hub only: addresses of devices on ports */
++#define USB_PORT_ENABLED 0xff
++#define USB_PORT_SUSPENDED 0xfe
++#define USB_PORT_POWERED 0xfd
++#define USB_PORT_DISABLED 0xfc
++};
++
++struct usb_ctl_report {
++	int	ucr_report;
++	u_char	ucr_data[1024];	/* filled data size will vary */
++};
++
++struct usb_device_stats {
++	u_long	uds_requests[4];	/* indexed by transfer type UE_* */
++};
++
++#define WUSB_MIN_IE			0x80
++#define WUSB_WCTA_IE			0x80
++#define WUSB_WCONNECTACK_IE		0x81
++#define WUSB_WHOSTINFO_IE		0x82
++#define  WUHI_GET_CA(_bmAttributes_) ((_bmAttributes_) & 0x3)
++#define   WUHI_CA_RECONN		0x00
++#define   WUHI_CA_LIMITED		0x01
++#define   WUHI_CA_ALL			0x03
++#define  WUHI_GET_MLSI(_bmAttributes_) (((_bmAttributes_) & 0x38) >> 3)
++#define WUSB_WCHCHANGEANNOUNCE_IE	0x83
++#define WUSB_WDEV_DISCONNECT_IE		0x84
++#define WUSB_WHOST_DISCONNECT_IE	0x85
++#define WUSB_WRELEASE_CHANNEL_IE	0x86
++#define WUSB_WWORK_IE			0x87
++#define WUSB_WCHANNEL_STOP_IE		0x88
++#define WUSB_WDEV_KEEPALIVE_IE		0x89
++#define WUSB_WISOCH_DISCARD_IE		0x8A
++#define WUSB_WRESETDEVICE_IE		0x8B
++#define WUSB_WXMIT_PACKET_ADJUST_IE	0x8C
++#define WUSB_MAX_IE			0x8C
++
++/* Device Notification Types */
++
++#define WUSB_DN_MIN			0x01
++#define WUSB_DN_CONNECT			0x01
++# define WUSB_DA_OLDCONN	0x00
++# define WUSB_DA_NEWCONN	0x01
++# define WUSB_DA_SELF_BEACON	0x02
++# define WUSB_DA_DIR_BEACON	0x04
++# define WUSB_DA_NO_BEACON	0x06
++#define WUSB_DN_DISCONNECT		0x02
++#define WUSB_DN_EPRDY			0x03
++#define WUSB_DN_MASAVAILCHANGED		0x04
++#define WUSB_DN_REMOTEWAKEUP		0x05
++#define WUSB_DN_SLEEP			0x06
++#define WUSB_DN_ALIVE			0x07
++#define WUSB_DN_MAX			0x07
++
++#ifdef _MSC_VER
++#include <pshpack1.h>
++#endif
++
++/* WUSB Handshake Data.  Used during the SET/GET HANDSHAKE requests */
++typedef struct wusb_hndshk_data {
++	uByte bMessageNumber;
++	uByte bStatus;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte CDID[16];
++	uByte Nonce[16];
++	uByte MIC[8];
++} UPACKED wusb_hndshk_data_t;
++#define WUSB_HANDSHAKE_LEN_FOR_MIC	38
++
++/* WUSB Connection Context */
++typedef struct wusb_conn_context {
++	uByte CHID [16];
++	uByte CDID [16];
++	uByte CK [16];
++} UPACKED wusb_conn_context_t;
++
++/* WUSB Security Descriptor */
++typedef struct wusb_security_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumEncryptionTypes;
++} UPACKED wusb_security_desc_t;
++
++/* WUSB Encryption Type Descriptor */
++typedef struct wusb_encrypt_type_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++
++	uByte bEncryptionType;
++#define WUETD_UNSECURE		0
++#define WUETD_WIRED		1
++#define WUETD_CCM_1		2
++#define WUETD_RSA_1		3
++
++	uByte bEncryptionValue;
++	uByte bAuthKeyIndex;
++} UPACKED wusb_encrypt_type_desc_t;
++
++/* WUSB Key Descriptor */
++typedef struct wusb_key_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte tTKID[3];
++	uByte bReserved;
++	uByte KeyData[1];	/* variable length */
++} UPACKED wusb_key_desc_t;
++
++/* WUSB BOS Descriptor (Binary device Object Store) */
++typedef struct wusb_bos_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uWord wTotalLength;
++	uByte bNumDeviceCaps;
++} UPACKED wusb_bos_desc_t;
++
++#define USB_DEVICE_CAPABILITY_20_EXTENSION	0x02
++typedef struct usb_dev_cap_20_ext_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_20_EXT_LPM				0x02
++	uDWord bmAttributes;
++} UPACKED usb_dev_cap_20_ext_desc_t;
++
++#define USB_DEVICE_CAPABILITY_SS_USB		0x03
++typedef struct usb_dev_cap_ss_usb {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++#define USB_DC_SS_USB_LTM_CAPABLE		0x02
++	uByte bmAttributes;
++#define USB_DC_SS_USB_SPEED_SUPPORT_LOW		0x01
++#define USB_DC_SS_USB_SPEED_SUPPORT_FULL	0x02
++#define USB_DC_SS_USB_SPEED_SUPPORT_HIGH	0x04
++#define USB_DC_SS_USB_SPEED_SUPPORT_SS		0x08
++	uWord wSpeedsSupported;
++	uByte bFunctionalitySupport;
++	uByte bU1DevExitLat;
++	uWord wU2DevExitLat;
++} UPACKED usb_dev_cap_ss_usb_t;
++
++#define USB_DEVICE_CAPABILITY_CONTAINER_ID	0x04
++typedef struct usb_dev_cap_container_id {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bReserved;
++	uByte containerID[16];
++} UPACKED usb_dev_cap_container_id_t;
++
++/* Device Capability Type Codes */
++#define WUSB_DEVICE_CAPABILITY_WIRELESS_USB 0x01
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte caps[1];	/* Variable length */
++} UPACKED wusb_dev_cap_desc_t;
++
++/* Device Capability Descriptor */
++typedef struct wusb_dev_cap_uwb_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bDevCapabilityType;
++	uByte bmAttributes;
++	uWord wPHYRates;	/* Bitmap */
++	uByte bmTFITXPowerInfo;
++	uByte bmFFITXPowerInfo;
++	uWord bmBandGroup;
++	uByte bReserved;
++} UPACKED wusb_dev_cap_uwb_desc_t;
++
++/* Wireless USB Endpoint Companion Descriptor */
++typedef struct wusb_endpoint_companion_desc {
++	uByte bLength;
++	uByte bDescriptorType;
++	uByte bMaxBurst;
++	uByte bMaxSequence;
++	uWord wMaxStreamDelay;
++	uWord wOverTheAirPacketSize;
++	uByte bOverTheAirInterval;
++	uByte bmCompAttributes;
++} UPACKED wusb_endpoint_companion_desc_t;
++
++/* Wireless USB Numeric Association M1 Data Structure */
++typedef struct wusb_m1_data {
++	uByte version;
++	uWord langId;
++	uByte deviceFriendlyNameLength;
++	uByte sha_256_m3[32];
++	uByte deviceFriendlyName[256];
++} UPACKED wusb_m1_data_t;
++
++typedef struct wusb_m2_data {
++	uByte version;
++	uWord langId;
++	uByte hostFriendlyNameLength;
++	uByte pkh[384];
++	uByte hostFriendlyName[256];
++} UPACKED wusb_m2_data_t;
++
++typedef struct wusb_m3_data {
++	uByte pkd[384];
++	uByte nd;
++} UPACKED wusb_m3_data_t;
++
++typedef struct wusb_m4_data {
++	uDWord _attributeTypeIdAndLength_1;
++	uWord  associationTypeId;
++
++	uDWord _attributeTypeIdAndLength_2;
++	uWord  associationSubTypeId;
++
++	uDWord _attributeTypeIdAndLength_3;
++	uDWord length;
++
++	uDWord _attributeTypeIdAndLength_4;
++	uDWord associationStatus;
++
++	uDWord _attributeTypeIdAndLength_5;
++	uByte  chid[16];
++
++	uDWord _attributeTypeIdAndLength_6;
++	uByte  cdid[16];
++
++	uDWord _attributeTypeIdAndLength_7;
++	uByte  bandGroups[2];
++} UPACKED wusb_m4_data_t;
++
++#ifdef _MSC_VER
++#include <poppack.h>
++#endif
++
++#ifdef __cplusplus
++}
++#endif
++
++#endif /* _USB_H_ */
+diff --git a/drivers/usb/host/dwc_otg/Makefile b/drivers/usb/host/dwc_otg/Makefile
+new file mode 100644
+index 0000000..236c47c
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/Makefile
+@@ -0,0 +1,80 @@
++#
++# Makefile for DWC_otg Highspeed USB controller driver
++#
++
++ifneq ($(KERNELRELEASE),)
++
++# Use the BUS_INTERFACE variable to compile the software for either
++# PCI(PCI_INTERFACE) or LM(LM_INTERFACE) bus.
++ifeq ($(BUS_INTERFACE),)
++#	BUS_INTERFACE = -DPCI_INTERFACE
++#	BUS_INTERFACE = -DLM_INTERFACE
++        BUS_INTERFACE = -DPLATFORM_INTERFACE
++endif
++
++#ccflags-y	+= -DDEBUG
++#ccflags-y	+= -DDWC_OTG_DEBUGLEV=1 # reduce common debug msgs
++
++# Use one of the following flags to compile the software in host-only or
++# device-only mode.
++#ccflags-y        += -DDWC_HOST_ONLY
++#ccflags-y        += -DDWC_DEVICE_ONLY
++
++ccflags-y	+= -Dlinux -DDWC_HS_ELECT_TST
++#ccflags-y	+= -DDWC_EN_ISOC
++ccflags-y   	+= -I$(obj)/../dwc_common_port
++#ccflags-y   	+= -I$(PORTLIB)
++ccflags-y   	+= -DDWC_LINUX
++ccflags-y   	+= $(CFI)
++ccflags-y	+= $(BUS_INTERFACE)
++#ccflags-y	+= -DDWC_DEV_SRPCAP
++
++obj-$(CONFIG_USB_DWCOTG) += dwc_otg.o
++
++dwc_otg-objs	:= dwc_otg_driver.o dwc_otg_attr.o
++dwc_otg-objs	+= dwc_otg_cil.o dwc_otg_cil_intr.o
++dwc_otg-objs	+= dwc_otg_pcd_linux.o dwc_otg_pcd.o dwc_otg_pcd_intr.o
++dwc_otg-objs	+= dwc_otg_hcd.o dwc_otg_hcd_linux.o dwc_otg_hcd_intr.o dwc_otg_hcd_queue.o dwc_otg_hcd_ddma.o
++dwc_otg-objs	+= dwc_otg_adp.o
++ifneq ($(CFI),)
++dwc_otg-objs	+= dwc_otg_cfi.o
++endif
++
++kernrelwd := $(subst ., ,$(KERNELRELEASE))
++kernrel3 := $(word 1,$(kernrelwd)).$(word 2,$(kernrelwd)).$(word 3,$(kernrelwd))
++
++ifneq ($(kernrel3),2.6.20)
++ccflags-y += $(CPPFLAGS)
++endif
++
++else
++
++PWD		:= $(shell pwd)
++PORTLIB		:= $(PWD)/../dwc_common_port
++
++# Command paths
++CTAGS		:= $(CTAGS)
++DOXYGEN		:= $(DOXYGEN)
++
++default: portlib
++	$(MAKE) -C$(KDIR) M=$(PWD) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++
++install: default
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) modules_install
++	$(MAKE) -C$(KDIR) M=$(PWD) modules_install
++
++portlib:
++	$(MAKE) -C$(KDIR) M=$(PORTLIB) ARCH=$(ARCH) CROSS_COMPILE=$(CROSS_COMPILE) modules
++	cp $(PORTLIB)/Module.symvers $(PWD)/
++
++docs:	$(wildcard *.[hc]) doc/doxygen.cfg
++	$(DOXYGEN) doc/doxygen.cfg
++
++tags:	$(wildcard *.[hc])
++	$(CTAGS) -e $(wildcard *.[hc]) $(wildcard linux/*.[hc]) $(wildcard $(KDIR)/include/linux/usb*.h)
++
++
++clean:
++	rm -rf   *.o *.ko .*cmd *.mod.c .tmp_versions Module.symvers
++
++endif
+diff --git a/drivers/usb/host/dwc_otg/doc/doxygen.cfg b/drivers/usb/host/dwc_otg/doc/doxygen.cfg
+new file mode 100644
+index 0000000..712b057
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/doc/doxygen.cfg
+@@ -0,0 +1,224 @@
++# Doxyfile 1.3.9.1
++
++#---------------------------------------------------------------------------
++# Project related configuration options
++#---------------------------------------------------------------------------
++PROJECT_NAME           = "DesignWare USB 2.0 OTG Controller (DWC_otg) Device Driver"
++PROJECT_NUMBER         = v3.00a
++OUTPUT_DIRECTORY       = ./doc/
++CREATE_SUBDIRS         = NO
++OUTPUT_LANGUAGE        = English
++BRIEF_MEMBER_DESC      = YES
++REPEAT_BRIEF           = YES
++ABBREVIATE_BRIEF       = "The $name class" \
++                         "The $name widget" \
++                         "The $name file" \
++                         is \
++                         provides \
++                         specifies \
++                         contains \
++                         represents \
++                         a \
++                         an \
++                         the
++ALWAYS_DETAILED_SEC    = NO
++INLINE_INHERITED_MEMB  = NO
++FULL_PATH_NAMES        = NO
++STRIP_FROM_PATH        =
++STRIP_FROM_INC_PATH    =
++SHORT_NAMES            = NO
++JAVADOC_AUTOBRIEF      = YES
++MULTILINE_CPP_IS_BRIEF = NO
++INHERIT_DOCS           = YES
++DISTRIBUTE_GROUP_DOC   = NO
++TAB_SIZE               = 8
++ALIASES                =
++OPTIMIZE_OUTPUT_FOR_C  = YES
++OPTIMIZE_OUTPUT_JAVA   = NO
++SUBGROUPING            = YES
++#---------------------------------------------------------------------------
++# Build related configuration options
++#---------------------------------------------------------------------------
++EXTRACT_ALL            = NO
++EXTRACT_PRIVATE        = YES
++EXTRACT_STATIC         = YES
++EXTRACT_LOCAL_CLASSES  = YES
++EXTRACT_LOCAL_METHODS  = NO
++HIDE_UNDOC_MEMBERS     = NO
++HIDE_UNDOC_CLASSES     = NO
++HIDE_FRIEND_COMPOUNDS  = NO
++HIDE_IN_BODY_DOCS      = NO
++INTERNAL_DOCS          = NO
++CASE_SENSE_NAMES       = NO
++HIDE_SCOPE_NAMES       = NO
++SHOW_INCLUDE_FILES     = YES
++INLINE_INFO            = YES
++SORT_MEMBER_DOCS       = NO
++SORT_BRIEF_DOCS        = NO
++SORT_BY_SCOPE_NAME     = NO
++GENERATE_TODOLIST      = YES
++GENERATE_TESTLIST      = YES
++GENERATE_BUGLIST       = YES
++GENERATE_DEPRECATEDLIST= YES
++ENABLED_SECTIONS       =
++MAX_INITIALIZER_LINES  = 30
++SHOW_USED_FILES        = YES
++SHOW_DIRECTORIES       = YES
++#---------------------------------------------------------------------------
++# configuration options related to warning and progress messages
++#---------------------------------------------------------------------------
++QUIET                  = YES
++WARNINGS               = YES
++WARN_IF_UNDOCUMENTED   = NO
++WARN_IF_DOC_ERROR      = YES
++WARN_FORMAT            = "$file:$line: $text"
++WARN_LOGFILE           =
++#---------------------------------------------------------------------------
++# configuration options related to the input files
++#---------------------------------------------------------------------------
++INPUT                  = .
++FILE_PATTERNS          = *.c \
++                         *.h \
++                         ./linux/*.c \
++                         ./linux/*.h
++RECURSIVE              = NO
++EXCLUDE                = ./test/ \
++                         ./dwc_otg/.AppleDouble/
++EXCLUDE_SYMLINKS       = YES
++EXCLUDE_PATTERNS       = *.mod.*
++EXAMPLE_PATH           =
++EXAMPLE_PATTERNS       = *
++EXAMPLE_RECURSIVE      = NO
++IMAGE_PATH             =
++INPUT_FILTER           =
++FILTER_PATTERNS        =
++FILTER_SOURCE_FILES    = NO
++#---------------------------------------------------------------------------
++# configuration options related to source browsing
++#---------------------------------------------------------------------------
++SOURCE_BROWSER         = YES
++INLINE_SOURCES         = NO
++STRIP_CODE_COMMENTS    = YES
++REFERENCED_BY_RELATION = NO
++REFERENCES_RELATION    = NO
++VERBATIM_HEADERS       = NO
++#---------------------------------------------------------------------------
++# configuration options related to the alphabetical class index
++#---------------------------------------------------------------------------
++ALPHABETICAL_INDEX     = NO
++COLS_IN_ALPHA_INDEX    = 5
++IGNORE_PREFIX          =
++#---------------------------------------------------------------------------
++# configuration options related to the HTML output
++#---------------------------------------------------------------------------
++GENERATE_HTML          = YES
++HTML_OUTPUT            = html
++HTML_FILE_EXTENSION    = .html
++HTML_HEADER            =
++HTML_FOOTER            =
++HTML_STYLESHEET        =
++HTML_ALIGN_MEMBERS     = YES
++GENERATE_HTMLHELP      = NO
++CHM_FILE               =
++HHC_LOCATION           =
++GENERATE_CHI           = NO
++BINARY_TOC             = NO
++TOC_EXPAND             = NO
++DISABLE_INDEX          = NO
++ENUM_VALUES_PER_LINE   = 4
++GENERATE_TREEVIEW      = YES
++TREEVIEW_WIDTH         = 250
++#---------------------------------------------------------------------------
++# configuration options related to the LaTeX output
++#---------------------------------------------------------------------------
++GENERATE_LATEX         = NO
++LATEX_OUTPUT           = latex
++LATEX_CMD_NAME         = latex
++MAKEINDEX_CMD_NAME     = makeindex
++COMPACT_LATEX          = NO
++PAPER_TYPE             = a4wide
++EXTRA_PACKAGES         =
++LATEX_HEADER           =
++PDF_HYPERLINKS         = NO
++USE_PDFLATEX           = NO
++LATEX_BATCHMODE        = NO
++LATEX_HIDE_INDICES     = NO
++#---------------------------------------------------------------------------
++# configuration options related to the RTF output
++#---------------------------------------------------------------------------
++GENERATE_RTF           = NO
++RTF_OUTPUT             = rtf
++COMPACT_RTF            = NO
++RTF_HYPERLINKS         = NO
++RTF_STYLESHEET_FILE    =
++RTF_EXTENSIONS_FILE    =
++#---------------------------------------------------------------------------
++# configuration options related to the man page output
++#---------------------------------------------------------------------------
++GENERATE_MAN           = NO
++MAN_OUTPUT             = man
++MAN_EXTENSION          = .3
++MAN_LINKS              = NO
++#---------------------------------------------------------------------------
++# configuration options related to the XML output
++#---------------------------------------------------------------------------
++GENERATE_XML           = NO
++XML_OUTPUT             = xml
++XML_SCHEMA             =
++XML_DTD                =
++XML_PROGRAMLISTING     = YES
++#---------------------------------------------------------------------------
++# configuration options for the AutoGen Definitions output
++#---------------------------------------------------------------------------
++GENERATE_AUTOGEN_DEF   = NO
++#---------------------------------------------------------------------------
++# configuration options related to the Perl module output
++#---------------------------------------------------------------------------
++GENERATE_PERLMOD       = NO
++PERLMOD_LATEX          = NO
++PERLMOD_PRETTY         = YES
++PERLMOD_MAKEVAR_PREFIX =
++#---------------------------------------------------------------------------
++# Configuration options related to the preprocessor
++#---------------------------------------------------------------------------
++ENABLE_PREPROCESSING   = YES
++MACRO_EXPANSION        = YES
++EXPAND_ONLY_PREDEF     = YES
++SEARCH_INCLUDES        = YES
++INCLUDE_PATH           =
++INCLUDE_FILE_PATTERNS  =
++PREDEFINED             = DEVICE_ATTR DWC_EN_ISOC
++EXPAND_AS_DEFINED      = DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW DWC_OTG_DEVICE_ATTR_BITFIELD_STORE DWC_OTG_DEVICE_ATTR_BITFIELD_RW DWC_OTG_DEVICE_ATTR_BITFIELD_RO DWC_OTG_DEVICE_ATTR_REG_SHOW DWC_OTG_DEVICE_ATTR_REG_STORE DWC_OTG_DEVICE_ATTR_REG32_RW DWC_OTG_DEVICE_ATTR_REG32_RO DWC_EN_ISOC
++SKIP_FUNCTION_MACROS   = NO
++#---------------------------------------------------------------------------
++# Configuration::additions related to external references
++#---------------------------------------------------------------------------
++TAGFILES               =
++GENERATE_TAGFILE       =
++ALLEXTERNALS           = NO
++EXTERNAL_GROUPS        = YES
++PERL_PATH              = /usr/bin/perl
++#---------------------------------------------------------------------------
++# Configuration options related to the dot tool
++#---------------------------------------------------------------------------
++CLASS_DIAGRAMS         = YES
++HIDE_UNDOC_RELATIONS   = YES
++HAVE_DOT               = NO
++CLASS_GRAPH            = YES
++COLLABORATION_GRAPH    = YES
++UML_LOOK               = NO
++TEMPLATE_RELATIONS     = NO
++INCLUDE_GRAPH          = YES
++INCLUDED_BY_GRAPH      = YES
++CALL_GRAPH             = NO
++GRAPHICAL_HIERARCHY    = YES
++DOT_IMAGE_FORMAT       = png
++DOT_PATH               =
++DOTFILE_DIRS           =
++MAX_DOT_GRAPH_DEPTH    = 1000
++GENERATE_LEGEND        = YES
++DOT_CLEANUP            = YES
++#---------------------------------------------------------------------------
++# Configuration::additions related to the search engine
++#---------------------------------------------------------------------------
++SEARCHENGINE           = NO
+diff --git a/drivers/usb/host/dwc_otg/dummy_audio.c b/drivers/usb/host/dwc_otg/dummy_audio.c
+new file mode 100644
+index 0000000..225decf
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dummy_audio.c
+@@ -0,0 +1,1575 @@
++/*
++ * zero.c -- Gadget Zero, for USB development
++ *
++ * Copyright (C) 2003-2004 David Brownell
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions
++ * are met:
++ * 1. Redistributions of source code must retain the above copyright
++ *    notice, this list of conditions, and the following disclaimer,
++ *    without modification.
++ * 2. Redistributions in binary form must reproduce the above copyright
++ *    notice, this list of conditions and the following disclaimer in the
++ *    documentation and/or other materials provided with the distribution.
++ * 3. The names of the above-listed copyright holders may not be used
++ *    to endorse or promote products derived from this software without
++ *    specific prior written permission.
++ *
++ * ALTERNATIVELY, this software may be distributed under the terms of the
++ * GNU General Public License ("GPL") as published by the Free Software
++ * Foundation, either version 2 of that License or (at your option) any
++ * later version.
++ *
++ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS
++ * IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
++ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
++ * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR
++ * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
++ * EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
++ * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
++ * PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
++ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ */
++
++
++/*
++ * Gadget Zero only needs two bulk endpoints, and is an example of how you
++ * can write a hardware-agnostic gadget driver running inside a USB device.
++ *
++ * Hardware details are visible (see CONFIG_USB_ZERO_* below) but don't
++ * affect most of the driver.
++ *
++ * Use it with the Linux host/master side "usbtest" driver to get a basic
++ * functional test of your device-side usb stack, or with "usb-skeleton".
++ *
++ * It supports two similar configurations.  One sinks whatever the usb host
++ * writes, and in return sources zeroes.  The other loops whatever the host
++ * writes back, so the host can read it.  Module options include:
++ *
++ *   buflen=N		default N=4096, buffer size used
++ *   qlen=N		default N=32, how many buffers in the loopback queue
++ *   loopdefault	default false, list loopback config first
++ *
++ * Many drivers will only have one configuration, letting them be much
++ * simpler if they also don't support high speed operation (like this
++ * driver does).
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/delay.h>
++#include <linux/ioport.h>
++#include <linux/sched.h>
++#include <linux/slab.h>
++#include <linux/smp_lock.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/timer.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/uts.h>
++#include <linux/version.h>
++#include <linux/device.h>
++#include <linux/moduleparam.h>
++#include <linux/proc_fs.h>
++
++#include <asm/byteorder.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/system.h>
++#include <asm/unaligned.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#include <linux/usb_gadget.h>
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++static int utf8_to_utf16le(const char *s, u16 *cp, unsigned len)
++{
++	int	count = 0;
++	u8	c;
++	u16	uchar;
++
++	/* this insists on correct encodings, though not minimal ones.
++	 * BUT it currently rejects legit 4-byte UTF-8 code points,
++	 * which need surrogate pairs.  (Unicode 3.1 can use them.)
++	 */
++	while (len != 0 && (c = (u8) *s++) != 0) {
++		if (unlikely(c & 0x80)) {
++			// 2-byte sequence:
++			// 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
++			if ((c & 0xe0) == 0xc0) {
++				uchar = (c & 0x1f) << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++			// 3-byte sequence (most CJKV characters):
++			// zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
++			} else if ((c & 0xf0) == 0xe0) {
++				uchar = (c & 0x0f) << 12;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c << 6;
++
++				c = (u8) *s++;
++				if ((c & 0xc0) != 0xc0)
++					goto fail;
++				c &= 0x3f;
++				uchar |= c;
++
++				/* no bogus surrogates */
++				if (0xd800 <= uchar && uchar <= 0xdfff)
++					goto fail;
++
++			// 4-byte sequence (surrogate pairs, currently rare):
++			// 11101110wwwwzzzzyy + 110111yyyyxxxxxx
++			//     = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
++			// (uuuuu = wwww + 1)
++			// FIXME accept the surrogate code points (only)
++
++			} else
++				goto fail;
++		} else
++			uchar = c;
++		put_unaligned (cpu_to_le16 (uchar), cp++);
++		count++;
++		len--;
++	}
++	return count;
++fail:
++	return -1;
++}
++
++
++/**
++ * usb_gadget_get_string - fill out a string descriptor
++ * @table: of c strings encoded using UTF-8
++ * @id: string id, from low byte of wValue in get string descriptor
++ * @buf: at least 256 bytes
++ *
++ * Finds the UTF-8 string matching the ID, and converts it into a
++ * string descriptor in utf16-le.
++ * Returns length of descriptor (always even) or negative errno
++ *
++ * If your driver needs stings in multiple languages, you'll probably
++ * "switch (wIndex) { ... }"  in your ep0 string descriptor logic,
++ * using this routine after choosing which set of UTF-8 strings to use.
++ * Note that US-ASCII is a strict subset of UTF-8; any string bytes with
++ * the eighth bit set will be multibyte UTF-8 characters, not ISO-8859/1
++ * characters (which are also widely used in C strings).
++ */
++int
++usb_gadget_get_string (struct usb_gadget_strings *table, int id, u8 *buf)
++{
++	struct usb_string	*s;
++	int			len;
++
++	/* descriptor 0 has the language id */
++	if (id == 0) {
++		buf [0] = 4;
++		buf [1] = USB_DT_STRING;
++		buf [2] = (u8) table->language;
++		buf [3] = (u8) (table->language >> 8);
++		return 4;
++	}
++	for (s = table->strings; s && s->s; s++)
++		if (s->id == id)
++			break;
++
++	/* unrecognized: stall. */
++	if (!s || !s->s)
++		return -EINVAL;
++
++	/* string descriptors have length, tag, then UTF16-LE text */
++	len = min ((size_t) 126, strlen (s->s));
++	memset (buf + 2, 0, 2 * len);	/* zero all the bytes */
++	len = utf8_to_utf16le(s->s, (u16 *)&buf[2], len);
++	if (len < 0)
++		return -EINVAL;
++	buf [0] = (len + 1) * 2;
++	buf [1] = USB_DT_STRING;
++	return buf [0];
++}
++
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++/**
++ * usb_descriptor_fillbuf - fill buffer with descriptors
++ * @buf: Buffer to be filled
++ * @buflen: Size of buf
++ * @src: Array of descriptor pointers, terminated by null pointer.
++ *
++ * Copies descriptors into the buffer, returning the length or a
++ * negative error code if they can't all be copied.  Useful when
++ * assembling descriptors for an associated set of interfaces used
++ * as part of configuring a composite device; or in other cases where
++ * sets of descriptors need to be marshaled.
++ */
++int
++usb_descriptor_fillbuf(void *buf, unsigned buflen,
++		const struct usb_descriptor_header **src)
++{
++	u8	*dest = buf;
++
++	if (!src)
++		return -EINVAL;
++
++	/* fill buffer from src[] until null descriptor ptr */
++	for (; 0 != *src; src++) {
++		unsigned		len = (*src)->bLength;
++
++		if (len > buflen)
++			return -EINVAL;
++		memcpy(dest, *src, len);
++		buflen -= len;
++		dest += len;
++	}
++	return dest - (u8 *)buf;
++}
++
++
++/**
++ * usb_gadget_config_buf - builts a complete configuration descriptor
++ * @config: Header for the descriptor, including characteristics such
++ *	as power requirements and number of interfaces.
++ * @desc: Null-terminated vector of pointers to the descriptors (interface,
++ *	endpoint, etc) defining all functions in this device configuration.
++ * @buf: Buffer for the resulting configuration descriptor.
++ * @length: Length of buffer.  If this is not big enough to hold the
++ *	entire configuration descriptor, an error code will be returned.
++ *
++ * This copies descriptors into the response buffer, building a descriptor
++ * for that configuration.  It returns the buffer length or a negative
++ * status code.  The config.wTotalLength field is set to match the length
++ * of the result, but other descriptor fields (including power usage and
++ * interface count) must be set by the caller.
++ *
++ * Gadget drivers could use this when constructing a config descriptor
++ * in response to USB_REQ_GET_DESCRIPTOR.  They will need to patch the
++ * resulting bDescriptorType value if USB_DT_OTHER_SPEED_CONFIG is needed.
++ */
++int usb_gadget_config_buf(
++	const struct usb_config_descriptor	*config,
++	void					*buf,
++	unsigned				length,
++	const struct usb_descriptor_header	**desc
++)
++{
++	struct usb_config_descriptor		*cp = buf;
++	int					len;
++
++	/* config descriptor first */
++	if (length < USB_DT_CONFIG_SIZE || !desc)
++		return -EINVAL;
++	*cp = *config;
++
++	/* then interface/endpoint/class/vendor/... */
++	len = usb_descriptor_fillbuf(USB_DT_CONFIG_SIZE + (u8*)buf,
++			length - USB_DT_CONFIG_SIZE, desc);
++	if (len < 0)
++		return len;
++	len += USB_DT_CONFIG_SIZE;
++	if (len > 0xffff)
++		return -EINVAL;
++
++	/* patch up the config descriptor */
++	cp->bLength = USB_DT_CONFIG_SIZE;
++	cp->bDescriptorType = USB_DT_CONFIG;
++	cp->wTotalLength = cpu_to_le16(len);
++	cp->bmAttributes |= USB_CONFIG_ATT_ONE;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++/*-------------------------------------------------------------------------*/
++
++
++#define RBUF_LEN (1024*1024)
++static int rbuf_start;
++static int rbuf_len;
++static __u8 rbuf[RBUF_LEN];
++
++/*-------------------------------------------------------------------------*/
++
++#define DRIVER_VERSION		"St Patrick's Day 2004"
++
++static const char shortname [] = "zero";
++static const char longname [] = "YAMAHA YST-MS35D USB Speaker  ";
++
++static const char source_sink [] = "source and sink data";
++static const char loopback [] = "loop input to output";
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * driver assumes self-powered hardware, and
++ * has no way for users to trigger remote wakeup.
++ *
++ * this version autoconfigures as much as possible,
++ * which is reasonable for most "bulk-only" drivers.
++ */
++static const char *EP_IN_NAME;		/* source */
++static const char *EP_OUT_NAME;		/* sink */
++
++/*-------------------------------------------------------------------------*/
++
++/* big enough to hold our biggest descriptor */
++#define USB_BUFSIZ	512
++
++struct zero_dev {
++	spinlock_t		lock;
++	struct usb_gadget	*gadget;
++	struct usb_request	*req;		/* for control responses */
++
++	/* when configured, we have one of two configs:
++	 * - source data (in to host) and sink it (out from host)
++	 * - or loop it back (out from host back in to host)
++	 */
++	u8			config;
++	struct usb_ep		*in_ep, *out_ep;
++
++	/* autoresume timer */
++	struct timer_list	resume;
++};
++
++#define xprintk(d,level,fmt,args...) \
++	dev_printk(level , &(d)->gadget->dev , fmt , ## args)
++
++#ifdef DEBUG
++#define DBG(dev,fmt,args...) \
++	xprintk(dev , KERN_DEBUG , fmt , ## args)
++#else
++#define DBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* DEBUG */
++
++#ifdef VERBOSE
++#define VDBG	DBG
++#else
++#define VDBG(dev,fmt,args...) \
++	do { } while (0)
++#endif /* VERBOSE */
++
++#define ERROR(dev,fmt,args...) \
++	xprintk(dev , KERN_ERR , fmt , ## args)
++#define WARN(dev,fmt,args...) \
++	xprintk(dev , KERN_WARNING , fmt , ## args)
++#define INFO(dev,fmt,args...) \
++	xprintk(dev , KERN_INFO , fmt , ## args)
++
++/*-------------------------------------------------------------------------*/
++
++static unsigned buflen = 4096;
++static unsigned qlen = 32;
++static unsigned pattern = 0;
++
++module_param (buflen, uint, S_IRUGO|S_IWUSR);
++module_param (qlen, uint, S_IRUGO|S_IWUSR);
++module_param (pattern, uint, S_IRUGO|S_IWUSR);
++
++/*
++ * if it's nonzero, autoresume says how many seconds to wait
++ * before trying to wake up the host after suspend.
++ */
++static unsigned autoresume = 0;
++module_param (autoresume, uint, 0);
++
++/*
++ * Normally the "loopback" configuration is second (index 1) so
++ * it's not the default.  Here's where to change that order, to
++ * work better with hosts where config changes are problematic.
++ * Or controllers (like superh) that only support one config.
++ */
++static int loopdefault = 0;
++
++module_param (loopdefault, bool, S_IRUGO|S_IWUSR);
++
++/*-------------------------------------------------------------------------*/
++
++/* Thanks to NetChip Technologies for donating this product ID.
++ *
++ * DO NOT REUSE THESE IDs with a protocol-incompatible driver!!  Ever!!
++ * Instead:  allocate your own, using normal USB-IF procedures.
++ */
++#ifndef	CONFIG_USB_ZERO_HNPTEST
++#define DRIVER_VENDOR_NUM	0x0525		/* NetChip */
++#define DRIVER_PRODUCT_NUM	0xa4a0		/* Linux-USB "Gadget Zero" */
++#else
++#define DRIVER_VENDOR_NUM	0x1a0a		/* OTG test device IDs */
++#define DRIVER_PRODUCT_NUM	0xbadd
++#endif
++
++/*-------------------------------------------------------------------------*/
++
++/*
++ * DESCRIPTORS ... most are static, but strings and (full)
++ * configuration descriptors are built on demand.
++ */
++
++/*
++#define STRING_MANUFACTURER		25
++#define STRING_PRODUCT			42
++#define STRING_SERIAL			101
++*/
++#define STRING_MANUFACTURER		1
++#define STRING_PRODUCT			2
++#define STRING_SERIAL			3
++
++#define STRING_SOURCE_SINK		250
++#define STRING_LOOPBACK			251
++
++/*
++ * This device advertises two configurations; these numbers work
++ * on a pxa250 as well as more flexible hardware.
++ */
++#define	CONFIG_SOURCE_SINK	3
++#define	CONFIG_LOOPBACK		2
++
++/*
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.idVendor =		__constant_cpu_to_le16 (DRIVER_VENDOR_NUM),
++	.idProduct =		__constant_cpu_to_le16 (DRIVER_PRODUCT_NUM),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	2,
++};
++*/
++static struct usb_device_descriptor
++device_desc = {
++	.bLength =		sizeof device_desc,
++	.bDescriptorType =	USB_DT_DEVICE,
++	.bcdUSB =		__constant_cpu_to_le16 (0x0100),
++	.bDeviceClass =		USB_CLASS_PER_INTERFACE,
++	.bDeviceSubClass =      0,
++	.bDeviceProtocol =      0,
++	.bMaxPacketSize0 =      64,
++	.bcdDevice =            __constant_cpu_to_le16 (0x0100),
++	.idVendor =		__constant_cpu_to_le16 (0x0499),
++	.idProduct =		__constant_cpu_to_le16 (0x3002),
++	.iManufacturer =	STRING_MANUFACTURER,
++	.iProduct =		STRING_PRODUCT,
++	.iSerialNumber =	STRING_SERIAL,
++	.bNumConfigurations =	1,
++};
++
++static struct usb_config_descriptor
++z_config = {
++	.bLength =		sizeof z_config,
++	.bDescriptorType =	USB_DT_CONFIG,
++
++	/* compute wTotalLength on the fly */
++	.bNumInterfaces =	2,
++	.bConfigurationValue =	1,
++	.iConfiguration =	0,
++	.bmAttributes =		0x40,
++	.bMaxPower =		0,	/* self-powered */
++};
++
++
++static struct usb_otg_descriptor
++otg_descriptor = {
++	.bLength =		sizeof otg_descriptor,
++	.bDescriptorType =	USB_DT_OTG,
++
++	.bmAttributes =		USB_OTG_SRP,
++};
++
++/* one interface in each configuration */
++#ifdef	CONFIG_USB_GADGET_DUALSPEED
++
++/*
++ * usb 2.0 devices need to expose both high speed and full speed
++ * descriptors, unless they only run at full speed.
++ *
++ * that means alternate endpoint descriptors (bigger packets)
++ * and a "device qualifier" ... plus more construction options
++ * for the config descriptor.
++ */
++
++static struct usb_qualifier_descriptor
++dev_qualifier = {
++	.bLength =		sizeof dev_qualifier,
++	.bDescriptorType =	USB_DT_DEVICE_QUALIFIER,
++
++	.bcdUSB =		__constant_cpu_to_le16 (0x0200),
++	.bDeviceClass =		USB_CLASS_VENDOR_SPEC,
++
++	.bNumConfigurations =	2,
++};
++
++
++struct usb_cs_as_general_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bTerminalLink;
++	__u8  bDelay;
++	__u16  wFormatTag;
++} __attribute__ ((packed));
++
++struct usb_cs_as_format_descriptor {
++	__u8  bLength;
++	__u8  bDescriptorType;
++
++	__u8  bDescriptorSubType;
++	__u8  bFormatType;
++	__u8  bNrChannels;
++	__u8  bSubframeSize;
++	__u8  bBitResolution;
++	__u8  bSamfreqType;
++	__u8  tLowerSamFreq[3];
++	__u8  tUpperSamFreq[3];
++} __attribute__ ((packed));
++
++static const struct usb_interface_descriptor
++z_audio_control_if_desc = {
++	.bLength =		sizeof z_audio_control_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 0,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x1,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 0,
++	.bNumEndpoints = 0,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_interface_descriptor
++z_audio_if_desc2 = {
++	.bLength =		sizeof z_audio_if_desc,
++	.bDescriptorType =	USB_DT_INTERFACE,
++	.bInterfaceNumber = 1,
++	.bAlternateSetting = 1,
++	.bNumEndpoints = 1,
++	.bInterfaceClass = USB_CLASS_AUDIO,
++	.bInterfaceSubClass = 0x2,
++	.bInterfaceProtocol = 0,
++	.iInterface = 0,
++};
++
++static const struct usb_cs_as_general_descriptor
++z_audio_cs_as_if_desc = {
++	.bLength = 7,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 0x01,
++	.bTerminalLink = 0x01,
++	.bDelay = 0x0,
++	.wFormatTag = __constant_cpu_to_le16 (0x0001)
++};
++
++
++static const struct usb_cs_as_format_descriptor
++z_audio_cs_as_format_desc = {
++	.bLength = 0xe,
++	.bDescriptorType = 0x24,
++
++	.bDescriptorSubType = 2,
++	.bFormatType = 1,
++	.bNrChannels = 1,
++	.bSubframeSize = 1,
++	.bBitResolution = 8,
++	.bSamfreqType = 0,
++	.tLowerSamFreq = {0x7e, 0x13, 0x00},
++	.tUpperSamFreq = {0xe2, 0xd6, 0x00},
++};
++
++static const struct usb_endpoint_descriptor
++z_iso_ep = {
++	.bLength = 0x09,
++	.bDescriptorType = 0x05,
++	.bEndpointAddress = 0x04,
++	.bmAttributes = 0x09,
++	.wMaxPacketSize = 0x0038,
++	.bInterval = 0x01,
++	.bRefresh = 0x00,
++	.bSynchAddress = 0x00,
++};
++
++static char z_iso_ep2[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++// 9 bytes
++static char z_ac_interface_header_desc[] =
++{ 0x09, 0x24, 0x01, 0x00, 0x01, 0x2b, 0x00, 0x01, 0x01 };
++
++// 12 bytes
++static char z_0[] = {0x0c, 0x24, 0x02, 0x01, 0x01, 0x01, 0x00, 0x02,
++		     0x03, 0x00, 0x00, 0x00};
++// 13 bytes
++static char z_1[] = {0x0d, 0x24, 0x06, 0x02, 0x01, 0x02, 0x15, 0x00,
++		     0x02, 0x00, 0x02, 0x00, 0x00};
++// 9 bytes
++static char z_2[] = {0x09, 0x24, 0x03, 0x03, 0x01, 0x03, 0x00, 0x02,
++		     0x00};
++
++static char za_0[] = {0x09, 0x04, 0x01, 0x02, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_1[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_2[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x01, 0x08, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_3[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_4[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_5[] = {0x09, 0x04, 0x01, 0x03, 0x01, 0x01, 0x02, 0x00,
++		      0x00};
++
++static char za_6[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_7[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x02, 0x10, 0x00,
++		      0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_8[] = {0x09, 0x05, 0x04, 0x09, 0x70, 0x00, 0x01, 0x00,
++		      0x00};
++
++static char za_9[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_10[] = {0x09, 0x04, 0x01, 0x04, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_11[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_12[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x02, 0x10, 0x00,
++		       0x73, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_13[] = {0x09, 0x05, 0x04, 0x09, 0xe0, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_14[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_15[] = {0x09, 0x04, 0x01, 0x05, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_16[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_17[] = {0x0e, 0x24, 0x02, 0x01, 0x01, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_18[] = {0x09, 0x05, 0x04, 0x09, 0xa8, 0x00, 0x01, 0x00,
++		       0x00};
++
++static char za_19[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++static char za_20[] = {0x09, 0x04, 0x01, 0x06, 0x01, 0x01, 0x02, 0x00,
++		       0x00};
++
++static char za_21[] = {0x07, 0x24, 0x01, 0x01, 0x00, 0x01, 0x00};
++
++static char za_22[] = {0x0e, 0x24, 0x02, 0x01, 0x02, 0x03, 0x14, 0x00,
++		       0x7e, 0x13, 0x00, 0xe2, 0xd6, 0x00};
++
++static char za_23[] = {0x09, 0x05, 0x04, 0x09, 0x50, 0x01, 0x01, 0x00,
++		       0x00};
++
++static char za_24[] = {0x07, 0x25, 0x01, 0x00, 0x02, 0x00, 0x02};
++
++
++
++static const struct usb_descriptor_header *z_function [] = {
++	(struct usb_descriptor_header *) &z_audio_control_if_desc,
++	(struct usb_descriptor_header *) &z_ac_interface_header_desc,
++	(struct usb_descriptor_header *) &z_0,
++	(struct usb_descriptor_header *) &z_1,
++	(struct usb_descriptor_header *) &z_2,
++	(struct usb_descriptor_header *) &z_audio_if_desc,
++	(struct usb_descriptor_header *) &z_audio_if_desc2,
++	(struct usb_descriptor_header *) &z_audio_cs_as_if_desc,
++	(struct usb_descriptor_header *) &z_audio_cs_as_format_desc,
++	(struct usb_descriptor_header *) &z_iso_ep,
++	(struct usb_descriptor_header *) &z_iso_ep2,
++	(struct usb_descriptor_header *) &za_0,
++	(struct usb_descriptor_header *) &za_1,
++	(struct usb_descriptor_header *) &za_2,
++	(struct usb_descriptor_header *) &za_3,
++	(struct usb_descriptor_header *) &za_4,
++	(struct usb_descriptor_header *) &za_5,
++	(struct usb_descriptor_header *) &za_6,
++	(struct usb_descriptor_header *) &za_7,
++	(struct usb_descriptor_header *) &za_8,
++	(struct usb_descriptor_header *) &za_9,
++	(struct usb_descriptor_header *) &za_10,
++	(struct usb_descriptor_header *) &za_11,
++	(struct usb_descriptor_header *) &za_12,
++	(struct usb_descriptor_header *) &za_13,
++	(struct usb_descriptor_header *) &za_14,
++	(struct usb_descriptor_header *) &za_15,
++	(struct usb_descriptor_header *) &za_16,
++	(struct usb_descriptor_header *) &za_17,
++	(struct usb_descriptor_header *) &za_18,
++	(struct usb_descriptor_header *) &za_19,
++	(struct usb_descriptor_header *) &za_20,
++	(struct usb_descriptor_header *) &za_21,
++	(struct usb_descriptor_header *) &za_22,
++	(struct usb_descriptor_header *) &za_23,
++	(struct usb_descriptor_header *) &za_24,
++	NULL,
++};
++
++/* maxpacket and other transfer characteristics vary by speed. */
++#define ep_desc(g,hs,fs) (((g)->speed==USB_SPEED_HIGH)?(hs):(fs))
++
++#else
++
++/* if there's no high speed support, maxpacket doesn't change. */
++#define ep_desc(g,hs,fs) fs
++
++#endif	/* !CONFIG_USB_GADGET_DUALSPEED */
++
++static char				manufacturer [40];
++//static char				serial [40];
++static char				serial [] = "Ser 00 em";
++
++/* static strings, in UTF-8 */
++static struct usb_string		strings [] = {
++	{ STRING_MANUFACTURER, manufacturer, },
++	{ STRING_PRODUCT, longname, },
++	{ STRING_SERIAL, serial, },
++	{ STRING_LOOPBACK, loopback, },
++	{ STRING_SOURCE_SINK, source_sink, },
++	{  }			/* end of list */
++};
++
++static struct usb_gadget_strings	stringtab = {
++	.language	= 0x0409,	/* en-us */
++	.strings	= strings,
++};
++
++/*
++ * config descriptors are also handcrafted.  these must agree with code
++ * that sets configurations, and with code managing interfaces and their
++ * altsettings.  other complexity may come from:
++ *
++ *  - high speed support, including "other speed config" rules
++ *  - multiple configurations
++ *  - interfaces with alternate settings
++ *  - embedded class or vendor-specific descriptors
++ *
++ * this handles high speed, and has a second config that could as easily
++ * have been an alternate interface setting (on most hardware).
++ *
++ * NOTE:  to demonstrate (and test) more USB capabilities, this driver
++ * should include an altsetting to test interrupt transfers, including
++ * high bandwidth modes at high speed.  (Maybe work like Intel's test
++ * device?)
++ */
++static int
++config_buf (struct usb_gadget *gadget, u8 *buf, u8 type, unsigned index)
++{
++	int len;
++	const struct usb_descriptor_header **function;
++
++	function = z_function;
++	len = usb_gadget_config_buf (&z_config, buf, USB_BUFSIZ, function);
++	if (len < 0)
++		return len;
++	((struct usb_config_descriptor *) buf)->bDescriptorType = type;
++	return len;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_request *
++alloc_ep_req (struct usb_ep *ep, unsigned length)
++{
++	struct usb_request	*req;
++
++	req = usb_ep_alloc_request (ep, GFP_ATOMIC);
++	if (req) {
++		req->length = length;
++		req->buf = usb_ep_alloc_buffer (ep, length,
++				&req->dma, GFP_ATOMIC);
++		if (!req->buf) {
++			usb_ep_free_request (ep, req);
++			req = NULL;
++		}
++	}
++	return req;
++}
++
++static void free_ep_req (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->buf)
++		usb_ep_free_buffer (ep, req->buf, req->dma, req->length);
++	usb_ep_free_request (ep, req);
++}
++
++/*-------------------------------------------------------------------------*/
++
++/* optionally require specific source/sink data patterns  */
++
++static int
++check_read_data (
++	struct zero_dev		*dev,
++	struct usb_ep		*ep,
++	struct usb_request	*req
++)
++{
++	unsigned	i;
++	u8		*buf = req->buf;
++
++	for (i = 0; i < req->actual; i++, buf++) {
++		switch (pattern) {
++		/* all-zeroes has no synchronization issues */
++		case 0:
++			if (*buf == 0)
++				continue;
++			break;
++		/* mod63 stays in sync with short-terminated transfers,
++		 * or otherwise when host and gadget agree on how large
++		 * each usb transfer request should be.  resync is done
++		 * with set_interface or set_config.
++		 */
++		case 1:
++			if (*buf == (u8)(i % 63))
++				continue;
++			break;
++		}
++		ERROR (dev, "bad OUT byte, buf [%d] = %d\n", i, *buf);
++		usb_ep_set_halt (ep);
++		return -EINVAL;
++	}
++	return 0;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_reset_config (struct zero_dev *dev)
++{
++	if (dev->config == 0)
++		return;
++
++	DBG (dev, "reset config\n");
++
++	/* just disable endpoints, forcing completion of pending i/o.
++	 * all our completion handlers free their requests in this case.
++	 */
++	if (dev->in_ep) {
++		usb_ep_disable (dev->in_ep);
++		dev->in_ep = NULL;
++	}
++	if (dev->out_ep) {
++		usb_ep_disable (dev->out_ep);
++		dev->out_ep = NULL;
++	}
++	dev->config = 0;
++	del_timer (&dev->resume);
++}
++
++#define _write(f, buf, sz) (f->f_op->write(f, buf, sz, &f->f_pos))
++
++static void
++zero_isoc_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	struct zero_dev	*dev = ep->driver_data;
++	int		status = req->status;
++	int i, j;
++
++	switch (status) {
++
++	case 0: 			/* normal completion? */
++		//printk ("\nzero ---------------> isoc normal completion %d bytes\n", req->actual);
++		for (i=0, j=rbuf_start; i<req->actual; i++) {
++			//printk ("%02x ", ((__u8*)req->buf)[i]);
++			rbuf[j] = ((__u8*)req->buf)[i];
++			j++;
++			if (j >= RBUF_LEN) j=0;
++		}
++		rbuf_start = j;
++		//printk ("\n\n");
++
++		if (rbuf_len < RBUF_LEN) {
++			rbuf_len += req->actual;
++			if (rbuf_len > RBUF_LEN) {
++				rbuf_len = RBUF_LEN;
++			}
++		}
++
++		break;
++
++	/* this endpoint is normally active while we're configured */
++	case -ECONNABORTED: 		/* hardware forced ep reset */
++	case -ECONNRESET:		/* request dequeued */
++	case -ESHUTDOWN:		/* disconnect from host */
++		VDBG (dev, "%s gone (%d), %d/%d\n", ep->name, status,
++				req->actual, req->length);
++		if (ep == dev->out_ep)
++			check_read_data (dev, ep, req);
++		free_ep_req (ep, req);
++		return;
++
++	case -EOVERFLOW:		/* buffer overrun on read means that
++					 * we didn't provide a big enough
++					 * buffer.
++					 */
++	default:
++#if 1
++		DBG (dev, "%s complete --> %d, %d/%d\n", ep->name,
++				status, req->actual, req->length);
++#endif
++	case -EREMOTEIO:		/* short read */
++		break;
++	}
++
++	status = usb_ep_queue (ep, req, GFP_ATOMIC);
++	if (status) {
++		ERROR (dev, "kill %s:  resubmit %d bytes --> %d\n",
++				ep->name, req->length, status);
++		usb_ep_set_halt (ep);
++		/* FIXME recover later ... somehow */
++	}
++}
++
++static struct usb_request *
++zero_start_isoc_ep (struct usb_ep *ep, int gfp_flags)
++{
++	struct usb_request	*req;
++	int			status;
++
++	req = alloc_ep_req (ep, 512);
++	if (!req)
++		return NULL;
++
++	req->complete = zero_isoc_complete;
++
++	status = usb_ep_queue (ep, req, gfp_flags);
++	if (status) {
++		struct zero_dev	*dev = ep->driver_data;
++
++		ERROR (dev, "start %s --> %d\n", ep->name, status);
++		free_ep_req (ep, req);
++		req = NULL;
++	}
++
++	return req;
++}
++
++/* change our operational config.  this code must agree with the code
++ * that returns config descriptors, and altsetting code.
++ *
++ * it's also responsible for power management interactions. some
++ * configurations might not work with our current power sources.
++ *
++ * note that some device controller hardware will constrain what this
++ * code can do, perhaps by disallowing more than one configuration or
++ * by limiting configuration choices (like the pxa2xx).
++ */
++static int
++zero_set_config (struct zero_dev *dev, unsigned number, int gfp_flags)
++{
++	int			result = 0;
++	struct usb_gadget	*gadget = dev->gadget;
++	const struct usb_endpoint_descriptor	*d;
++	struct usb_ep		*ep;
++
++	if (number == dev->config)
++		return 0;
++
++	zero_reset_config (dev);
++
++	gadget_for_each_ep (ep, gadget) {
++
++		if (strcmp (ep->name, "ep4") == 0) {
++
++			d = (struct usb_endpoint_descripter *)&za_23; // isoc ep desc for audio i/f alt setting 6
++			result = usb_ep_enable (ep, d);
++
++			if (result == 0) {
++				ep->driver_data = dev;
++				dev->in_ep = ep;
++
++				if (zero_start_isoc_ep (ep, gfp_flags) != 0) {
++
++					dev->in_ep = ep;
++					continue;
++				}
++
++				usb_ep_disable (ep);
++				result = -EIO;
++			}
++		}
++
++	}
++
++	dev->config = number;
++	return result;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void zero_setup_complete (struct usb_ep *ep, struct usb_request *req)
++{
++	if (req->status || req->actual != req->length)
++		DBG ((struct zero_dev *) ep->driver_data,
++				"setup complete --> %d, %d/%d\n",
++				req->status, req->actual, req->length);
++}
++
++/*
++ * The setup() callback implements all the ep0 functionality that's
++ * not handled lower down, in hardware or the hardware driver (like
++ * device and endpoint feature flags, and their status).  It's all
++ * housekeeping for the gadget function we're implementing.  Most of
++ * the work is in config-specific setup.
++ */
++static int
++zero_setup (struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	struct usb_request	*req = dev->req;
++	int			value = -EOPNOTSUPP;
++
++	/* usually this stores reply data in the pre-allocated ep0 buffer,
++	 * but config change events will reconfigure hardware.
++	 */
++	req->zero = 0;
++	switch (ctrl->bRequest) {
++
++	case USB_REQ_GET_DESCRIPTOR:
++
++		switch (ctrl->wValue >> 8) {
++
++		case USB_DT_DEVICE:
++			value = min (ctrl->wLength, (u16) sizeof device_desc);
++			memcpy (req->buf, &device_desc, value);
++			break;
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++		case USB_DT_DEVICE_QUALIFIER:
++			if (!gadget->is_dualspeed)
++				break;
++			value = min (ctrl->wLength, (u16) sizeof dev_qualifier);
++			memcpy (req->buf, &dev_qualifier, value);
++			break;
++
++		case USB_DT_OTHER_SPEED_CONFIG:
++			if (!gadget->is_dualspeed)
++				break;
++			// FALLTHROUGH
++#endif /* CONFIG_USB_GADGET_DUALSPEED */
++		case USB_DT_CONFIG:
++			value = config_buf (gadget, req->buf,
++					ctrl->wValue >> 8,
++					ctrl->wValue & 0xff);
++			if (value >= 0)
++				value = min (ctrl->wLength, (u16) value);
++			break;
++
++		case USB_DT_STRING:
++			/* wIndex == language code.
++			 * this driver only handles one language, you can
++			 * add string tables for other languages, using
++			 * any UTF-8 characters
++			 */
++			value = usb_gadget_get_string (&stringtab,
++					ctrl->wValue & 0xff, req->buf);
++			if (value >= 0) {
++				value = min (ctrl->wLength, (u16) value);
++			}
++			break;
++		}
++		break;
++
++	/* currently two configs, two speeds */
++	case USB_REQ_SET_CONFIGURATION:
++		if (ctrl->bRequestType != 0)
++			goto unknown;
++
++		spin_lock (&dev->lock);
++		value = zero_set_config (dev, ctrl->wValue, GFP_ATOMIC);
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_CONFIGURATION:
++		if (ctrl->bRequestType != USB_DIR_IN)
++			goto unknown;
++		*(u8 *)req->buf = dev->config;
++		value = min (ctrl->wLength, (u16) 1);
++		break;
++
++	/* until we add altsetting support, or other interfaces,
++	 * only 0/0 are possible.  pxa2xx only supports 0/0 (poorly)
++	 * and already killed pending endpoint I/O.
++	 */
++	case USB_REQ_SET_INTERFACE:
++
++		if (ctrl->bRequestType != USB_RECIP_INTERFACE)
++			goto unknown;
++		spin_lock (&dev->lock);
++		if (dev->config) {
++			u8		config = dev->config;
++
++			/* resets interface configuration, forgets about
++			 * previous transaction state (queued bufs, etc)
++			 * and re-inits endpoint state (toggle etc)
++			 * no response queued, just zero status == success.
++			 * if we had more than one interface we couldn't
++			 * use this "reset the config" shortcut.
++			 */
++			zero_reset_config (dev);
++			zero_set_config (dev, config, GFP_ATOMIC);
++			value = 0;
++		}
++		spin_unlock (&dev->lock);
++		break;
++	case USB_REQ_GET_INTERFACE:
++		if ((ctrl->bRequestType == 0x21) && (ctrl->wIndex == 0x02)) {
++			value = ctrl->wLength;
++			break;
++		}
++		else {
++			if (ctrl->bRequestType != (USB_DIR_IN|USB_RECIP_INTERFACE))
++				goto unknown;
++			if (!dev->config)
++				break;
++			if (ctrl->wIndex != 0) {
++				value = -EDOM;
++				break;
++			}
++			*(u8 *)req->buf = 0;
++			value = min (ctrl->wLength, (u16) 1);
++		}
++		break;
++
++	/*
++	 * These are the same vendor-specific requests supported by
++	 * Intel's USB 2.0 compliance test devices.  We exceed that
++	 * device spec by allowing multiple-packet requests.
++	 */
++	case 0x5b:	/* control WRITE test -- fill the buffer */
++		if (ctrl->bRequestType != (USB_DIR_OUT|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* just read that many bytes into the buffer */
++		if (ctrl->wLength > USB_BUFSIZ)
++			break;
++		value = ctrl->wLength;
++		break;
++	case 0x5c:	/* control READ test -- return the buffer */
++		if (ctrl->bRequestType != (USB_DIR_IN|USB_TYPE_VENDOR))
++			goto unknown;
++		if (ctrl->wValue || ctrl->wIndex)
++			break;
++		/* expect those bytes are still in the buffer; send back */
++		if (ctrl->wLength > USB_BUFSIZ
++				|| ctrl->wLength != req->length)
++			break;
++		value = ctrl->wLength;
++		break;
++
++	case 0x01: // SET_CUR
++	case 0x02:
++	case 0x03:
++	case 0x04:
++	case 0x05:
++		value = ctrl->wLength;
++		break;
++	case 0x81:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xe3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x81;
++		//((u8*)req->buf)[1] = 0x81;
++		value = ctrl->wLength;
++		break;
++	case 0x82:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0xc3;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x00;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x82;
++		//((u8*)req->buf)[1] = 0x82;
++		value = ctrl->wLength;
++		break;
++	case 0x83:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x00;
++			break;
++		case 0x0300:
++			((u8*)req->buf)[0] = 0x60;
++			break;
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x18;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x83;
++		//((u8*)req->buf)[1] = 0x83;
++		value = ctrl->wLength;
++		break;
++	case 0x84:
++		switch (ctrl->wValue) {
++		case 0x0201:
++		case 0x0202:
++			((u8*)req->buf)[0] = 0x00;
++			((u8*)req->buf)[1] = 0x01;
++			break;
++		case 0x0300:
++		case 0x0500:
++			((u8*)req->buf)[0] = 0x08;
++			break;
++		}
++		//((u8*)req->buf)[0] = 0x84;
++		//((u8*)req->buf)[1] = 0x84;
++		value = ctrl->wLength;
++		break;
++	case 0x85:
++		((u8*)req->buf)[0] = 0x85;
++		((u8*)req->buf)[1] = 0x85;
++		value = ctrl->wLength;
++		break;
++
++
++	default:
++unknown:
++		printk("unknown control req%02x.%02x v%04x i%04x l%d\n",
++			ctrl->bRequestType, ctrl->bRequest,
++			ctrl->wValue, ctrl->wIndex, ctrl->wLength);
++	}
++
++	/* respond with data transfer before status phase? */
++	if (value >= 0) {
++		req->length = value;
++		req->zero = value < ctrl->wLength
++				&& (value % gadget->ep0->maxpacket) == 0;
++		value = usb_ep_queue (gadget->ep0, req, GFP_ATOMIC);
++		if (value < 0) {
++			DBG (dev, "ep_queue < 0 --> %d\n", value);
++			req->status = 0;
++			zero_setup_complete (gadget->ep0, req);
++		}
++	}
++
++	/* device either stalls (value < 0) or reports success */
++	return value;
++}
++
++static void
++zero_disconnect (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++	unsigned long		flags;
++
++	spin_lock_irqsave (&dev->lock, flags);
++	zero_reset_config (dev);
++
++	/* a more significant application might have some non-usb
++	 * activities to quiesce here, saving resources like power
++	 * or pushing the notification up a network stack.
++	 */
++	spin_unlock_irqrestore (&dev->lock, flags);
++
++	/* next we may get setup() calls to enumerate new connections;
++	 * or an unbind() during shutdown (including removing module).
++	 */
++}
++
++static void
++zero_autoresume (unsigned long _dev)
++{
++	struct zero_dev	*dev = (struct zero_dev *) _dev;
++	int		status;
++
++	/* normally the host would be woken up for something
++	 * more significant than just a timer firing...
++	 */
++	if (dev->gadget->speed != USB_SPEED_UNKNOWN) {
++		status = usb_gadget_wakeup (dev->gadget);
++		DBG (dev, "wakeup --> %d\n", status);
++	}
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_unbind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "unbind\n");
++
++	/* we've already been disconnected ... no i/o is active */
++	if (dev->req)
++		free_ep_req (gadget->ep0, dev->req);
++	del_timer_sync (&dev->resume);
++	kfree (dev);
++	set_gadget_data (gadget, NULL);
++}
++
++static int
++zero_bind (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev;
++	//struct usb_ep		*ep;
++
++	printk("binding\n");
++	/*
++	 * DRIVER POLICY CHOICE:  you may want to do this differently.
++	 * One thing to avoid is reusing a bcdDevice revision code
++	 * with different host-visible configurations or behavior
++	 * restrictions -- using ep1in/ep2out vs ep1out/ep3in, etc
++	 */
++	//device_desc.bcdDevice = __constant_cpu_to_le16 (0x0201);
++
++
++	/* ok, we made sense of the hardware ... */
++	dev = kmalloc (sizeof *dev, SLAB_KERNEL);
++	if (!dev)
++		return -ENOMEM;
++	memset (dev, 0, sizeof *dev);
++	spin_lock_init (&dev->lock);
++	dev->gadget = gadget;
++	set_gadget_data (gadget, dev);
++
++	/* preallocate control response and buffer */
++	dev->req = usb_ep_alloc_request (gadget->ep0, GFP_KERNEL);
++	if (!dev->req)
++		goto enomem;
++	dev->req->buf = usb_ep_alloc_buffer (gadget->ep0, USB_BUFSIZ,
++				&dev->req->dma, GFP_KERNEL);
++	if (!dev->req->buf)
++		goto enomem;
++
++	dev->req->complete = zero_setup_complete;
++
++	device_desc.bMaxPacketSize0 = gadget->ep0->maxpacket;
++
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	/* assume ep0 uses the same value for both speeds ... */
++	dev_qualifier.bMaxPacketSize0 = device_desc.bMaxPacketSize0;
++
++	/* and that all endpoints are dual-speed */
++	//hs_source_desc.bEndpointAddress = fs_source_desc.bEndpointAddress;
++	//hs_sink_desc.bEndpointAddress = fs_sink_desc.bEndpointAddress;
++#endif
++
++	usb_gadget_set_selfpowered (gadget);
++
++	init_timer (&dev->resume);
++	dev->resume.function = zero_autoresume;
++	dev->resume.data = (unsigned long) dev;
++
++	gadget->ep0->driver_data = dev;
++
++	INFO (dev, "%s, version: " DRIVER_VERSION "\n", longname);
++	INFO (dev, "using %s, OUT %s IN %s\n", gadget->name,
++		EP_OUT_NAME, EP_IN_NAME);
++
++	snprintf (manufacturer, sizeof manufacturer,
++		UTS_SYSNAME " " UTS_RELEASE " with %s",
++		gadget->name);
++
++	return 0;
++
++enomem:
++	zero_unbind (gadget);
++	return -ENOMEM;
++}
++
++/*-------------------------------------------------------------------------*/
++
++static void
++zero_suspend (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	if (gadget->speed == USB_SPEED_UNKNOWN)
++		return;
++
++	if (autoresume) {
++		mod_timer (&dev->resume, jiffies + (HZ * autoresume));
++		DBG (dev, "suspend, wakeup in %d seconds\n", autoresume);
++	} else
++		DBG (dev, "suspend\n");
++}
++
++static void
++zero_resume (struct usb_gadget *gadget)
++{
++	struct zero_dev		*dev = get_gadget_data (gadget);
++
++	DBG (dev, "resume\n");
++	del_timer (&dev->resume);
++}
++
++
++/*-------------------------------------------------------------------------*/
++
++static struct usb_gadget_driver zero_driver = {
++#ifdef CONFIG_USB_GADGET_DUALSPEED
++	.speed		= USB_SPEED_HIGH,
++#else
++	.speed		= USB_SPEED_FULL,
++#endif
++	.function	= (char *) longname,
++	.bind		= zero_bind,
++	.unbind		= zero_unbind,
++
++	.setup		= zero_setup,
++	.disconnect	= zero_disconnect,
++
++	.suspend	= zero_suspend,
++	.resume		= zero_resume,
++
++	.driver 	= {
++		.name		= (char *) shortname,
++		// .shutdown = ...
++		// .suspend = ...
++		// .resume = ...
++	},
++};
++
++MODULE_AUTHOR ("David Brownell");
++MODULE_LICENSE ("Dual BSD/GPL");
++
++static struct proc_dir_entry *pdir, *pfile;
++
++static int isoc_read_data (char *page, char **start,
++			   off_t off, int count,
++			   int *eof, void *data)
++{
++	int i;
++	static int c = 0;
++	static int done = 0;
++	static int s = 0;
++
++/*
++	printk ("\ncount: %d\n", count);
++	printk ("rbuf_start: %d\n", rbuf_start);
++	printk ("rbuf_len: %d\n", rbuf_len);
++	printk ("off: %d\n", off);
++	printk ("start: %p\n\n", *start);
++*/
++	if (done) {
++		c = 0;
++		done = 0;
++		*eof = 1;
++		return 0;
++	}
++
++	if (c == 0) {
++		if (rbuf_len == RBUF_LEN)
++			s = rbuf_start;
++		else s = 0;
++	}
++
++	for (i=0; i<count && c<rbuf_len; i++, c++) {
++		page[i] = rbuf[(c+s) % RBUF_LEN];
++	}
++	*start = page;
++
++	if (c >= rbuf_len) {
++		*eof = 1;
++		done = 1;
++	}
++
++
++	return i;
++}
++
++static int __init init (void)
++{
++
++	int retval = 0;
++
++	pdir = proc_mkdir("isoc_test", NULL);
++	if(pdir == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating dir\n");
++		goto done;
++	}
++	pdir->owner = THIS_MODULE;
++
++	pfile = create_proc_read_entry("isoc_data",
++				       0444, pdir,
++				       isoc_read_data,
++				       NULL);
++	if (pfile == NULL) {
++		retval = -ENOMEM;
++		printk("Error creating file\n");
++		goto no_file;
++	}
++	pfile->owner = THIS_MODULE;
++
++	return usb_gadget_register_driver (&zero_driver);
++
++ no_file:
++	remove_proc_entry("isoc_data", NULL);
++ done:
++	return retval;
++}
++module_init (init);
++
++static void __exit cleanup (void)
++{
++
++	usb_gadget_unregister_driver (&zero_driver);
++
++	remove_proc_entry("isoc_data", pdir);
++	remove_proc_entry("isoc_test", NULL);
++}
++module_exit (cleanup);
+diff --git a/drivers/usb/host/dwc_otg/dwc_cfi_common.h b/drivers/usb/host/dwc_otg/dwc_cfi_common.h
+new file mode 100644
+index 0000000..7770e20
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_cfi_common.h
+@@ -0,0 +1,142 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CFI_COMMON_H__)
++#define __DWC_CFI_COMMON_H__
++
++//#include <linux/types.h>
++
++/**
++ * @file
++ *
++ * This file contains the CFI specific common constants, interfaces
++ * (functions and macros) and structures for Linux. No PCD specific
++ * data structure or definition is to be included in this file.
++ *
++ */
++
++/** This is a request for all Core Features */
++#define VEN_CORE_GET_FEATURES		0xB1
++
++/** This is a request to get the value of a specific Core Feature */
++#define VEN_CORE_GET_FEATURE		0xB2
++
++/** This command allows the host to set the value of a specific Core Feature */
++#define VEN_CORE_SET_FEATURE		0xB3
++
++/** This command allows the host to set the default values of
++ * either all or any specific Core Feature
++ */
++#define VEN_CORE_RESET_FEATURES		0xB4
++
++/** This command forces the PCD to write the deferred values of a Core Features */
++#define VEN_CORE_ACTIVATE_FEATURES	0xB5
++
++/** This request reads a DWORD value from a register at the specified offset */
++#define VEN_CORE_READ_REGISTER		0xB6
++
++/** This request writes a DWORD value into a register at the specified offset */
++#define VEN_CORE_WRITE_REGISTER		0xB7
++
++/** This structure is the header of the Core Features dataset returned to
++ *  the Host
++ */
++struct cfi_all_features_header {
++/** The features header structure length is */
++#define CFI_ALL_FEATURES_HDR_LEN		8
++	/**
++	 * The total length of the features dataset returned to the Host
++	 */
++	uint16_t wTotalLen;
++
++	/**
++	 * CFI version number inBinary-Coded Decimal (i.e., 1.00 is 100H).
++	 * This field identifies the version of the CFI Specification with which
++	 * the device is compliant.
++	 */
++	uint16_t wVersion;
++
++	/** The ID of the Core */
++	uint16_t wCoreID;
++#define CFI_CORE_ID_UDC		1
++#define CFI_CORE_ID_OTG		2
++#define CFI_CORE_ID_WUDEV	3
++
++	/** Number of features returned by VEN_CORE_GET_FEATURES request */
++	uint16_t wNumFeatures;
++} UPACKED;
++
++typedef struct cfi_all_features_header cfi_all_features_header_t;
++
++/** This structure is a header of the Core Feature descriptor dataset returned to
++ *  the Host after the VEN_CORE_GET_FEATURES request
++ */
++struct cfi_feature_desc_header {
++#define CFI_FEATURE_DESC_HDR_LEN	8
++
++	/** The feature ID */
++	uint16_t wFeatureID;
++
++	/** Length of this feature descriptor in bytes - including the
++	 * length of the feature name string
++	 */
++	uint16_t wLength;
++
++	/** The data length of this feature in bytes */
++	uint16_t wDataLength;
++
++	/**
++	 * Attributes of this features
++	 * D0: Access rights
++	 * 0 - Read/Write
++	 * 1 - Read only
++	 */
++	uint8_t bmAttributes;
++#define CFI_FEATURE_ATTR_RO		1
++#define CFI_FEATURE_ATTR_RW		0
++
++	/** Length of the feature name in bytes */
++	uint8_t bNameLen;
++
++	/** The feature name buffer */
++	//uint8_t *name;
++} UPACKED;
++
++typedef struct cfi_feature_desc_header cfi_feature_desc_header_t;
++
++/**
++ * This structure describes a NULL terminated string referenced by its id field.
++ * It is very similar to usb_string structure but has the id field type set to 16-bit.
++ */
++struct cfi_string {
++	uint16_t id;
++	const uint8_t *s;
++};
++typedef struct cfi_string cfi_string_t;
++
++#endif
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_adp.c b/drivers/usb/host/dwc_otg/dwc_otg_adp.c
+new file mode 100644
+index 0000000..ce0618d
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.c
+@@ -0,0 +1,854 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.c $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_adp.h"
++
++/** @file
++ *
++ * This file contains the most of the Attach Detect Protocol implementation for
++ * the driver to support OTG Rev2.0.
++ *
++ */
++
++void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = value;
++	adpctl.b.ar = 0x2;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++}
++
++/**
++ * Function is called to read ADP registers
++ */
++uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = 0;
++	adpctl.b.ar = 0x1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->adpctl, adpctl.d32);
++
++	while (adpctl.b.ar) {
++		adpctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->adpctl);
++	}
++
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to read ADPCTL register and filter Write-clear bits
++ */
++uint32_t dwc_otg_adp_read_reg_filter(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 0;
++	adpctl.b.adp_prb_int = 0;
++	adpctl.b.adp_tmout_int = 0;
++
++	return adpctl.d32;
++}
++
++/**
++ * Function is called to write ADP registers
++ */
++void dwc_otg_adp_modify_reg(dwc_otg_core_if_t * core_if, uint32_t clr,
++			    uint32_t set)
++{
++	dwc_otg_adp_write_reg(core_if,
++			      (dwc_otg_adp_read_reg(core_if) & (~clr)) | set);
++}
++
++static void adp_sense_timeout(void *ptr)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	core_if->adp.sense_timer_started = 0;
++	DWC_PRINTF("ADP SENSE TIMEOUT\n");
++	if (core_if->adp_enable) {
++		dwc_otg_adp_sense_stop(core_if);
++		dwc_otg_adp_probe_start(core_if);
++	}
++}
++
++/**
++ * This function is called when the ADP vbus timer expires. Timeout is 1.1s.
++ */
++static void adp_vbuson_timeout(void *ptr)
++{
++	gpwrdn_data_t gpwrdn;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	DWC_PRINTF("%s: 1.1 seconds expire after turning on VBUS\n",__FUNCTION__);
++	if (core_if) {
++		core_if->adp.vbuson_timer_started = 0;
++		/* Turn off vbus */
++		hprt0.b.prtpwr = 1;
++		DWC_MODIFY_REG32(core_if->host_if->hprt0, hprt0.d32, 0);
++		gpwrdn.d32 = 0;
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			/* Enable Wakeup Logic */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 0;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			/* Suspend the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++			/* Switch on VDD */
++//                      gpwrdn.b.wkupactiv = 1;
++			gpwrdn.b.pmuactv = 1;
++			gpwrdn.b.pwrdnrstn = 1;
++			gpwrdn.b.pwrdnclmp = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++		} else {
++			/* Enable Power Down Logic */
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		}
++
++		/* Power off the core */
++		if (core_if->power_down == 2) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pwrdnswtch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn,
++					 gpwrdn.d32, 0);
++		}
++
++		/* Unmask SRP detected interrupt from Power Down Logic */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.srp_det_msk = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++		dwc_otg_adp_probe_start(core_if);
++		dwc_otg_dump_global_registers(core_if);
++		dwc_otg_dump_host_registers(core_if);
++	}
++
++}
++
++/**
++ * Start the ADP Initial Probe timer to detect if Port Connected interrupt is
++ * not asserted within 1.1 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_vbuson_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.vbuson_timer_started = 1;
++	if (core_if->adp.vbuson_timer)
++	{
++		DWC_PRINTF("SCHEDULING VBUSON TIMER\n");
++		/* 1.1 secs + 60ms necessary for cil_hcd_start*/
++		DWC_TIMER_SCHEDULE(core_if->adp.vbuson_timer, 1160);
++	} else {
++		DWC_WARN("VBUSON_TIMER = %p\n",core_if->adp.vbuson_timer);
++	}
++}
++
++#if 0
++/**
++ * Masks all DWC OTG core interrupts
++ *
++ */
++static void mask_all_interrupts(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++
++	/* Mask Host Interrupts */
++
++	/* Clear and disable HCINTs */
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk, 0);
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcint, 0xFFFFFFFF);
++
++	}
++
++	/* Clear and disable HAINT */
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk, 0x0000);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haint, 0xFFFFFFFF);
++
++	/* Mask Device Interrupts */
++	if (!core_if->multiproc_int_enable) {
++		/* Clear and disable IN Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable OUT Endpoint interrupts */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, 0);
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		/* Clear and disable DAINT */
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daint,
++				0xFFFFFFFF);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, 0);
++	} else {
++		for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->
++					diepint, 0xFFFFFFFF);
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[i], 0);
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->
++					doepint, 0xFFFFFFFF);
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				0);
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->deachint,
++				0xFFFFFFFF);
++
++	}
++
++	/* Disable interrupts */
++	ahbcfg.b.glblintrmsk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, 0xFFFFFFFF);
++}
++
++/**
++ * Unmask Port Connection Detected interrupt
++ *
++ */
++static void unmask_conn_det_intr(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t gintmsk = {.d32 = 0,.b.portintr = 1 };
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++}
++#endif
++
++/**
++ * Starts the ADP Probing
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl = {.d32 = 0};
++	gpwrdn_data_t gpwrdn;
++#if 0
++	adpctl_data_t adpctl_int = {.d32 = 0, .b.adp_prb_int = 1,
++								.b.adp_sns_int = 1, b.adp_tmout_int};
++#endif
++	dwc_otg_disable_global_interrupts(core_if);
++	DWC_PRINTF("ADP Probe Start\n");
++	core_if->adp.probe_enabled = 1;
++
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.d32 = 0;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	/* In Host mode unmask SRP detected interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.sts_chngint_msk = 1;
++	if (!gpwrdn.b.idsts) {
++		gpwrdn.b.srp_det_msk = 1;
++	}
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++
++	adpctl.b.adp_tmout_int_msk = 1;
++	adpctl.b.adp_prb_int_msk = 1;
++	adpctl.b.prb_dschg = 1;
++	adpctl.b.prb_delta = 1;
++	adpctl.b.prb_per = 1;
++	adpctl.b.adpen = 1;
++	adpctl.b.enaprb = 1;
++
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("ADP Probe Finish\n");
++	return 0;
++}
++
++/**
++ * Starts the ADP Sense timer to detect if ADP Sense interrupt is not asserted
++ * within 3 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_adp_sense_timer_start(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.sense_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->adp.sense_timer, 3000 /* 3 secs */ );
++}
++
++/**
++ * Starts the ADP Sense
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	DWC_PRINTF("ADP Sense Start\n");
++
++	/* Unmask ADP sense interrupt and mask all other from the core */
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adp_sns_int_msk = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	dwc_otg_disable_global_interrupts(core_if); // vahrama
++
++	/* Set ADP reset bit*/
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.adpres = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	while (adpctl.b.adpres) {
++		adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	}
++
++	adpctl.b.adpres = 0;
++	adpctl.b.adpen = 1;
++	adpctl.b.enasns = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	dwc_otg_adp_sense_timer_start(core_if);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Probing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if)
++{
++
++	adpctl_data_t adpctl;
++	DWC_PRINTF("Stop ADP probe\n");
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.probe_counter = 0;
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++
++	adpctl.b.adpen = 0;
++	adpctl.b.adp_prb_int = 1;
++	adpctl.b.adp_tmout_int = 1;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Stops the ADP Sensing
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++
++	core_if->adp.sense_enabled = 0;
++
++	adpctl.d32 = dwc_otg_adp_read_reg_filter(core_if);
++	adpctl.b.enasns = 0;
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * Called to turn on the VBUS after initial ADP probe in host mode.
++ * If port power was already enabled in cil_hcd_start function then
++ * only schedule a timer.
++ *
++ * @param core_if the pointer to core_if structure.
++ */
++void dwc_otg_adp_turnon_vbus(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_PRINTF("Turn on VBUS for 1.1s, port power is %d\n", hprt0.b.prtpwr);
++
++	if (hprt0.b.prtpwr == 0) {
++		hprt0.b.prtpwr = 1;
++		//DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++
++	dwc_otg_adp_vbuson_timer_start(core_if);
++}
++
++/**
++ * Called right after driver is loaded
++ * to perform initial actions for ADP
++ *
++ * @param core_if the pointer to core_if structure.
++ * @param is_host - flag for current mode of operation either from GINTSTS or GPWRDN
++ */
++void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host)
++{
++	gpwrdn_data_t gpwrdn;
++
++	DWC_PRINTF("ADP Initial Start\n");
++	core_if->adp.adp_started = 1;
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	dwc_otg_disable_global_interrupts(core_if);
++	if (is_host) {
++		DWC_PRINTF("HOST MODE\n");
++		/* Enable Power Down Logic Interrupt*/
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		/* Initialize first ADP probe to obtain Ramp Time value */
++		core_if->adp.initial_probe = 1;
++		dwc_otg_adp_probe_start(core_if);
++	} else {
++		gotgctl_data_t gotgctl;
++		gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		DWC_PRINTF("DEVICE MODE\n");
++		if (gotgctl.b.bsesvld == 0) {
++			/* Enable Power Down Logic Interrupt*/
++			gpwrdn.d32 = 0;
++			DWC_PRINTF("VBUS is not valid - start ADP probe\n");
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++			core_if->adp.initial_probe = 1;
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("VBUS is valid - initialize core as a Device\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++			dwc_otg_dump_global_registers(core_if);
++			dwc_otg_dump_dev_registers(core_if);
++		}
++	}
++}
++
++void dwc_otg_adp_init(dwc_otg_core_if_t * core_if)
++{
++	core_if->adp.adp_started = 0;
++	core_if->adp.initial_probe = 0;
++	core_if->adp.probe_timer_values[0] = -1;
++	core_if->adp.probe_timer_values[1] = -1;
++	core_if->adp.probe_enabled = 0;
++	core_if->adp.sense_enabled = 0;
++	core_if->adp.sense_timer_started = 0;
++	core_if->adp.vbuson_timer_started = 0;
++	core_if->adp.probe_counter = 0;
++	core_if->adp.gpwrdn = 0;
++	core_if->adp.attached = DWC_OTG_ADP_UNKOWN;
++	/* Initialize timers */
++	core_if->adp.sense_timer =
++	    DWC_TIMER_ALLOC("ADP SENSE TIMER", adp_sense_timeout, core_if);
++	core_if->adp.vbuson_timer =
++	    DWC_TIMER_ALLOC("ADP VBUS ON TIMER", adp_vbuson_timeout, core_if);
++	if (!core_if->adp.sense_timer || !core_if->adp.vbuson_timer)
++	{
++		DWC_ERROR("Could not allocate memory for ADP timers\n");
++	}
++}
++
++void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn.b.pmuintsel = 1;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (core_if->adp.probe_enabled)
++		dwc_otg_adp_probe_stop(core_if);
++	if (core_if->adp.sense_enabled)
++		dwc_otg_adp_sense_stop(core_if);
++	if (core_if->adp.sense_timer_started)
++		DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++	if (core_if->adp.vbuson_timer_started)
++		DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++	DWC_TIMER_FREE(core_if->adp.sense_timer);
++	DWC_TIMER_FREE(core_if->adp.vbuson_timer);
++}
++
++/////////////////////////////////////////////////////////////////////
++////////////// ADP Interrupt Handlers ///////////////////////////////
++/////////////////////////////////////////////////////////////////////
++/**
++ * This function sets Ramp Timer values
++ */
++static uint32_t set_timer_value(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if (core_if->adp.probe_timer_values[0] == -1) {
++		core_if->adp.probe_timer_values[0] = val;
++		core_if->adp.probe_timer_values[1] = -1;
++		return 1;
++	} else {
++		core_if->adp.probe_timer_values[1] =
++		    core_if->adp.probe_timer_values[0];
++		core_if->adp.probe_timer_values[0] = val;
++		return 0;
++	}
++}
++
++/**
++ * This function compares Ramp Timer values
++ */
++static uint32_t compare_timer_values(dwc_otg_core_if_t * core_if)
++{
++	uint32_t diff;
++	if (core_if->adp.probe_timer_values[0]>=core_if->adp.probe_timer_values[1])
++			diff = core_if->adp.probe_timer_values[0]-core_if->adp.probe_timer_values[1];
++	else
++			diff = core_if->adp.probe_timer_values[1]-core_if->adp.probe_timer_values[0];
++	if(diff < 2) {
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn, temp;
++	adpctl.d32 = val;
++
++	temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	core_if->adp.probe_counter++;
++	core_if->adp.gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (adpctl.b.rtim == 0 && !temp.b.idsts){
++		DWC_PRINTF("RTIM value is 0\n");
++		goto exit;
++	}
++	if (set_timer_value(core_if, adpctl.b.rtim) &&
++	    core_if->adp.initial_probe) {
++		core_if->adp.initial_probe = 0;
++		dwc_otg_adp_probe_stop(core_if);
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++		/* check which value is for device mode and which for Host mode */
++		if (!temp.b.idsts) {	/* considered host mode value is 0 */
++			/*
++			 * Turn on VBUS after initial ADP probe.
++			 */
++			core_if->op_state = A_HOST;
++			dwc_otg_enable_global_interrupts(core_if);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_start(core_if);
++			dwc_otg_adp_turnon_vbus(core_if);
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_enable_global_interrupts(core_if);
++			dwc_otg_initiate_srp(core_if);
++		}
++	} else if (core_if->adp.probe_counter > 2){
++		gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++		if (compare_timer_values(core_if)) {
++			DWC_PRINTF("Difference in timer values !!! \n");
++//                      core_if->adp.attached = DWC_OTG_ADP_ATTACHED;
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			/* check which value is for device mode and which for Host mode */
++			if (!temp.b.idsts) {	/* considered host mode value is 0 */
++				/* Disable Interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				core_if->op_state = A_HOST;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_hcd_start(core_if);
++			} else {
++				gotgctl_data_t gotgctl;
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++				if (!gotgctl.b.bsesvld) {
++					dwc_otg_initiate_srp(core_if);
++				}
++			}
++		}
++		if (core_if->power_down == 2) {
++			if (gpwrdn.b.bsessvld) {
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++			}
++		}
++	}
++exit:
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_prb_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function hadles ADP Sense Interrupt
++ */
++static int32_t dwc_otg_adp_handle_sns_intr(dwc_otg_core_if_t * core_if)
++{
++	adpctl_data_t adpctl;
++	/* Stop ADP Sense timer */
++	DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++
++	/* Restart ADP Sense timer */
++	dwc_otg_adp_sense_timer_start(core_if);
++
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_sns_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * This function handles ADP Probe Interrupts
++ */
++static int32_t dwc_otg_adp_handle_prb_tmout_intr(dwc_otg_core_if_t * core_if,
++						 uint32_t val)
++{
++	adpctl_data_t adpctl = {.d32 = 0 };
++	adpctl.d32 = val;
++	set_timer_value(core_if, adpctl.b.rtim);
++
++	/* Clear interrupt */
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	adpctl.b.adp_tmout_int = 1;
++	dwc_otg_adp_write_reg(core_if, adpctl.d32);
++
++	return 0;
++}
++
++/**
++ * ADP Interrupt handler.
++ *
++ */
++int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	adpctl_data_t adpctl = {.d32 = 0};
++
++	adpctl.d32 = dwc_otg_adp_read_reg(core_if);
++	DWC_PRINTF("ADPCTL = %08x\n",adpctl.d32);
++
++	if (adpctl.b.adp_sns_int & adpctl.b.adp_sns_int_msk) {
++		DWC_PRINTF("ADP Sense interrupt\n");
++		retval |= dwc_otg_adp_handle_sns_intr(core_if);
++	}
++	if (adpctl.b.adp_tmout_int & adpctl.b.adp_tmout_int_msk) {
++		DWC_PRINTF("ADP timeout interrupt\n");
++		retval |= dwc_otg_adp_handle_prb_tmout_intr(core_if, adpctl.d32);
++	}
++	if (adpctl.b.adp_prb_int & adpctl.b.adp_prb_int_msk) {
++		DWC_PRINTF("ADP Probe interrupt\n");
++		adpctl.b.adp_prb_int = 1;
++		retval |= dwc_otg_adp_handle_prb_intr(core_if, adpctl.d32);
++	}
++
++//	dwc_otg_adp_modify_reg(core_if, adpctl.d32, 0);
++	//dwc_otg_adp_write_reg(core_if, adpctl.d32);
++	DWC_PRINTF("RETURN FROM ADP ISR\n");
++
++	return retval;
++}
++
++/**
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if)
++{
++
++#ifndef DWC_HOST_ONLY
++	hprt0_data_t hprt0;
++	gpwrdn_data_t gpwrdn;
++	DWC_DEBUGPL(DBG_ANY, "++ Power Down Logic Session Request Interrupt++\n");
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	/* check which value is for device mode and which for Host mode */
++	if (!gpwrdn.b.idsts) {	/* considered host mode value is 0 */
++		DWC_PRINTF("SRP: Host mode\n");
++
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	} else {
++		DWC_PRINTF("SRP: Device mode %s\n", __FUNCTION__);
++		if (core_if->adp_enable) {
++			dwc_otg_adp_probe_stop(core_if);
++
++			/* Power on the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuactv = 0;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++#endif
++	return 1;
++}
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_adp.h b/drivers/usb/host/dwc_otg/dwc_otg_adp.h
+new file mode 100644
+index 0000000..4110b25
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_adp.h
+@@ -0,0 +1,80 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_adp.h $
++ * $Revision: #7 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_ADP_H__
++#define __DWC_OTG_ADP_H__
++
++/**
++ * @file
++ *
++ * This file contains the Attach Detect Protocol interfaces and defines
++ * (functions) and structures for Linux.
++ *
++ */
++
++#define DWC_OTG_ADP_UNATTACHED	0
++#define DWC_OTG_ADP_ATTACHED	1
++#define DWC_OTG_ADP_UNKOWN	2
++
++typedef struct dwc_otg_adp {
++	uint32_t adp_started;
++	uint32_t initial_probe;
++	int32_t probe_timer_values[2];
++	uint32_t probe_enabled;
++	uint32_t sense_enabled;
++	dwc_timer_t *sense_timer;
++	uint32_t sense_timer_started;
++	dwc_timer_t *vbuson_timer;
++	uint32_t vbuson_timer_started;
++	uint32_t attached;
++	uint32_t probe_counter;
++	uint32_t gpwrdn;
++} dwc_otg_adp_t;
++
++/**
++ * Attach Detect Protocol functions
++ */
++
++extern void dwc_otg_adp_write_reg(dwc_otg_core_if_t * core_if, uint32_t value);
++extern uint32_t dwc_otg_adp_read_reg(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_start(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_probe_stop(dwc_otg_core_if_t * core_if);
++extern uint32_t dwc_otg_adp_sense_stop(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++extern void dwc_otg_adp_init(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_adp_remove(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_intr(dwc_otg_core_if_t * core_if);
++extern int32_t dwc_otg_adp_handle_srp_intr(dwc_otg_core_if_t * core_if);
++
++#endif //__DWC_OTG_ADP_H__
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_attr.c b/drivers/usb/host/dwc_otg/dwc_otg_attr.c
+new file mode 100644
+index 0000000..fab2961
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.c
+@@ -0,0 +1,1210 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.c $
++ * $Revision: #44 $
++ * $Date: 2010/11/29 $
++ * $Change: 1636033 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.  The Linux driver attributes
++ * feature will be used to provide the Linux Diagnostic
++ * Interface. These attributes are accessed through sysfs.
++ */
++
++/** @page "Linux Module Attributes"
++ *
++ * The Linux module attributes feature is used to provide the Linux
++ * Diagnostic Interface.  These attributes are accessed through sysfs.
++ * The diagnostic interface will provide access to the controller for
++ * bringing up the hardware and testing.
++
++ The following table shows the attributes.
++ <table>
++ <tr>
++ <td><b> Name</b></td>
++ <td><b> Description</b></td>
++ <td><b> Access</b></td>
++ </tr>
++
++ <tr>
++ <td> mode </td>
++ <td> Returns the current mode: 0 for device mode, 1 for host mode</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hnpcapable </td>
++ <td> Gets or sets the "HNP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srpcapable </td>
++ <td> Gets or sets the "SRP-capable" bit in the Core USB Configuraton Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hsic_connect </td>
++ <td> Gets or sets the "HSIC-Connect" bit in the GLPMCFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> inv_sel_hsic </td>
++ <td> Gets or sets the "Invert Select HSIC" bit in the GLPMFG Register.
++ Read returns the current value.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> hnp </td>
++ <td> Initiates the Host Negotiation Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> srp </td>
++ <td> Initiates the Session Request Protocol.  Read returns the status.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> buspower </td>
++ <td> Gets or sets the Power State of the bus (0 - Off or 1 - On)</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> bussuspend </td>
++ <td> Suspends the USB bus.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> busconnected </td>
++ <td> Gets the connection status of the bus</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> gotgctl </td>
++ <td> Gets or sets the Core Control Status Register.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gusbcfg </td>
++ <td> Gets or sets the Core USB Configuration Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> grxfsiz </td>
++ <td> Gets or sets the Receive FIFO Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gnptxfsiz </td>
++ <td> Gets or sets the non-periodic Transmit Size Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gpvndctl </td>
++ <td> Gets or sets the PHY Vendor Control Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> ggpio </td>
++ <td> Gets the value in the lower 16-bits of the General Purpose IO Register
++ or sets the upper 16 bits.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> guid </td>
++ <td> Gets or sets the value of the User ID Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> gsnpsid </td>
++ <td> Gets the value of the Synopsys ID Regester</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> devspeed </td>
++ <td> Gets or sets the device speed setting in the DCFG register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> enumspeed </td>
++ <td> Gets the device enumeration Speed.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hptxfsiz </td>
++ <td> Gets the value of the Host Periodic Transmit FIFO</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hprt0 </td>
++ <td> Gets or sets the value in the Host Port Control and Status Register</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regoffset </td>
++ <td> Sets the register offset for the next Register Access</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regvalue </td>
++ <td> Gets or sets the value of the register at the offset in the regoffset attribute.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> remote_wakeup </td>
++ <td> On read, shows the status of Remote Wakeup. On write, initiates a remote
++ wakeup of the host. When bit 0 is 1 and Remote Wakeup is enabled, the Remote
++ Wakeup signalling bit in the Device Control Register is set for 1
++ milli-second.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> rem_wakeup_pwrdn </td>
++ <td> On read, shows the status core - hibernated or not. On write, initiates
++ a remote wakeup of the device from Hibernation. </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> mode_ch_tim_en </td>
++ <td> This bit is used to enable or disable the host core to wait for 200 PHY
++ clock cycles at the end of Resume to change the opmode signal to the PHY to 00
++ after Suspend or LPM. </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> fr_interval </td>
++ <td> On read, shows the value of HFIR Frame Interval. On write, dynamically
++ reload HFIR register during runtime. The application can write a value to this
++ register only after the Port Enable bit of the Host Port Control and Status
++ register (HPRT.PrtEnaPort) has been set </td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> disconnect_us </td>
++ <td> On read, shows the status of disconnect_device_us. On write, sets disconnect_us
++ which causes soft disconnect for 100us. Applicable only for device mode of operation.</td>
++ <td> Read/Write</td>
++ </tr>
++
++ <tr>
++ <td> regdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> spramdump </td>
++ <td> Dumps the contents of core registers.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcddump </td>
++ <td> Dumps the current HCD state.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> hcd_frrem </td>
++ <td> Shows the average value of the Frame Remaining
++ field in the Host Frame Number/Frame Remaining register when an SOF interrupt
++ occurs. This can be used to determine the average interrupt latency. Also
++ shows the average Frame Remaining value for start_transfer and the "a" and
++ "b" sample points. The "a" and "b" sample points may be used during debugging
++ bto determine how long it takes to execute a section of the HCD code.</td>
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> rd_reg_test </td>
++ <td> Displays the time required to read the GNPTXFSIZ register many times
++ (the output shows the number of times the register is read).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> wr_reg_test </td>
++ <td> Displays the time required to write the GNPTXFSIZ register many times
++ (the output shows the number of times the register is written).
++ <td> Read</td>
++ </tr>
++
++ <tr>
++ <td> lpm_response </td>
++ <td> Gets or sets lpm_response mode. Applicable only in device mode.
++ <td> Write</td>
++ </tr>
++
++ <tr>
++ <td> sleep_status </td>
++ <td> Shows sleep status of device.
++ <td> Read</td>
++ </tr>
++
++ </table>
++
++ Example usage:
++ To get the current mode:
++ cat /sys/devices/lm0/mode
++
++ To power down the USB:
++ echo 0 > /sys/devices/lm0/buspower
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++/*
++ * MACROs for defining sysfs attribute
++ */
++#ifdef LM_INTERFACE
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev);		\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PCI_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);	\
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++        struct platform_device *platform_dev = \
++                container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev);  \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++        struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++        dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t set = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_(otg_dev->core_if, set);\
++	return count; \
++}
++#endif
++
++/*
++ * MACROs for defining sysfs attribute for 32-bit registers
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct lm_device *lm_dev = container_of(_dev, struct lm_device, dev); \
++	dwc_otg_device_t *otg_dev = lm_get_drvdata(lm_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val; \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	dwc_otg_device_t *otg_dev = dev_get_drvdata(_dev);  \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#elif defined(PLATFORM_INTERFACE)
++#include "dwc_otg_dbg.h"
++#define DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_show (struct device *_dev, struct device_attribute *attr, char *buf) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val; \
++	DWC_PRINTF("%s(%p) -> platform_dev %p, otg_dev %p\n", \
++                    __func__, _dev, platform_dev, otg_dev); \
++	val = dwc_otg_get_##_otg_attr_name_ (otg_dev->core_if); \
++	return sprintf (buf, "%s = 0x%08x\n", _string_, val); \
++}
++#define DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++static ssize_t _otg_attr_name_##_store (struct device *_dev, struct device_attribute *attr, \
++					const char *buf, size_t count) \
++{ \
++	struct platform_device *platform_dev = container_of(_dev, struct platform_device, dev); \
++	dwc_otg_device_t *otg_dev = platform_get_drvdata(platform_dev); \
++	uint32_t val = simple_strtoul(buf, NULL, 16); \
++	dwc_otg_set_##_otg_attr_name_ (otg_dev->core_if, val); \
++	return count; \
++}
++
++#endif
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_BITFIELD_RO(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_BITFIELD_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RW(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_STORE(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0644,_otg_attr_name_##_show,_otg_attr_name_##_store);
++
++#define DWC_OTG_DEVICE_ATTR_REG32_RO(_otg_attr_name_,_addr_,_string_) \
++DWC_OTG_DEVICE_ATTR_REG_SHOW(_otg_attr_name_,_string_) \
++DEVICE_ATTR(_otg_attr_name_,0444,_otg_attr_name_##_show,NULL);
++
++/** @name Functions for Show/Store of Attributes */
++/**@{*/
++
++/**
++ * Helper function returning the otg_device structure of the given device
++ */
++static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++{
++        dwc_otg_device_t *otg_dev;
++        DWC_OTG_GETDRVDEV(otg_dev, _dev);
++        return otg_dev;
++}
++
++/**
++ * Show the register offset of the Register Access.
++ */
++static ssize_t regoffset_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return snprintf(buf, sizeof("0xFFFFFFFF\n") + 1, "0x%08x\n",
++			otg_dev->os_dep.reg_offset);
++}
++
++/**
++ * Set the register offset for the next Register Access 	Read/Write
++ */
++static ssize_t regoffset_store(struct device *_dev,
++			       struct device_attribute *attr,
++			       const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t offset = simple_strtoul(buf, NULL, 16);
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	if (offset < SZ_256K) {
++#elif  defined(PCI_INTERFACE)
++	if (offset < 0x00040000) {
++#endif
++		otg_dev->os_dep.reg_offset = offset;
++	} else {
++		dev_err(_dev, "invalid offset\n");
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(regoffset, S_IRUGO | S_IWUSR, regoffset_show, regoffset_store);
++
++/**
++ * Show the value of the register at the offset in the reg_offset
++ * attribute.
++ */
++static ssize_t regvalue_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val;
++	volatile uint32_t *addr;
++
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		val = DWC_READ_REG32(addr);
++		return snprintf(buf,
++				sizeof("Reg@0xFFFFFFFF = 0xFFFFFFFF\n") + 1,
++				"Reg@0x%06x = 0x%08x\n", otg_dev->os_dep.reg_offset,
++				val);
++	} else {
++		dev_err(_dev, "Invalid offset (0x%0x)\n", otg_dev->os_dep.reg_offset);
++		return sprintf(buf, "invalid offset\n");
++	}
++}
++
++/**
++ * Store the value in the register at the offset in the reg_offset
++ * attribute.
++ *
++ */
++static ssize_t regvalue_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	volatile uint32_t *addr;
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	//dev_dbg(_dev, "Offset=0x%08x Val=0x%08x\n", otg_dev->reg_offset, val);
++	if (otg_dev->os_dep.reg_offset != 0xFFFFFFFF && 0 != otg_dev->os_dep.base) {
++		/* Calculate the address */
++		addr = (uint32_t *) (otg_dev->os_dep.reg_offset +
++				     (uint8_t *) otg_dev->os_dep.base);
++		DWC_WRITE_REG32(addr, val);
++	} else {
++		dev_err(_dev, "Invalid Register Offset (0x%08x)\n",
++			otg_dev->os_dep.reg_offset);
++	}
++	return count;
++}
++
++DEVICE_ATTR(regvalue, S_IRUGO | S_IWUSR, regvalue_show, regvalue_store);
++
++/*
++ * Attributes
++ */
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(mode, "Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hnpcapable, "HNPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(srpcapable, "SRPCapable");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(hsic_connect, "HSIC Connect");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(inv_sel_hsic, "Invert Select HSIC");
++
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(buspower,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++//DWC_OTG_DEVICE_ATTR_BITFIELD_RW(bussuspend,&(otg_dev->core_if->core_global_regs->gotgctl),(1<<8),8,"Mode");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(busconnected, "Bus Connected");
++
++DWC_OTG_DEVICE_ATTR_REG32_RW(gotgctl, 0, "GOTGCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gusbcfg,
++			     &(otg_dev->core_if->core_global_regs->gusbcfg),
++			     "GUSBCFG");
++DWC_OTG_DEVICE_ATTR_REG32_RW(grxfsiz,
++			     &(otg_dev->core_if->core_global_regs->grxfsiz),
++			     "GRXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gnptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->gnptxfsiz),
++			     "GNPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(gpvndctl,
++			     &(otg_dev->core_if->core_global_regs->gpvndctl),
++			     "GPVNDCTL");
++DWC_OTG_DEVICE_ATTR_REG32_RW(ggpio,
++			     &(otg_dev->core_if->core_global_regs->ggpio),
++			     "GGPIO");
++DWC_OTG_DEVICE_ATTR_REG32_RW(guid, &(otg_dev->core_if->core_global_regs->guid),
++			     "GUID");
++DWC_OTG_DEVICE_ATTR_REG32_RO(gsnpsid,
++			     &(otg_dev->core_if->core_global_regs->gsnpsid),
++			     "GSNPSID");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RW(devspeed, "Device Speed");
++DWC_OTG_DEVICE_ATTR_BITFIELD_RO(enumspeed, "Device Enumeration Speed");
++
++DWC_OTG_DEVICE_ATTR_REG32_RO(hptxfsiz,
++			     &(otg_dev->core_if->core_global_regs->hptxfsiz),
++			     "HPTXFSIZ");
++DWC_OTG_DEVICE_ATTR_REG32_RW(hprt0, otg_dev->core_if->host_if->hprt0, "HPRT0");
++
++/**
++ * @todo Add code to initiate the HNP.
++ */
++/**
++ * Show the HNP status bit
++ */
++static ssize_t hnp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "HstNegScs = 0x%x\n",
++		       dwc_otg_get_hnpstatus(otg_dev->core_if));
++}
++
++/**
++ * Set the HNP Request bit
++ */
++static ssize_t hnp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_hnpreq(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(hnp, 0644, hnp_show, hnp_store);
++
++/**
++ * @todo Add code to initiate the SRP.
++ */
++/**
++ * Show the SRP status bit
++ */
++static ssize_t srp_show(struct device *_dev,
++			struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "SesReqScs = 0x%x\n",
++		       dwc_otg_get_srpstatus(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif
++}
++
++/**
++ * Set the SRP Request bit
++ */
++static ssize_t srp_store(struct device *_dev,
++			 struct device_attribute *attr,
++			 const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_pcd_initiate_srp(otg_dev->pcd);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(srp, 0644, srp_show, srp_store);
++
++/**
++ * @todo Need to do more for power on/off?
++ */
++/**
++ * Show the Bus Power status
++ */
++static ssize_t buspower_show(struct device *_dev,
++			     struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Power = 0x%x\n",
++		       dwc_otg_get_prtpower(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Power status
++ */
++static ssize_t buspower_store(struct device *_dev,
++			      struct device_attribute *attr,
++			      const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t on = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtpower(otg_dev->core_if, on);
++	return count;
++}
++
++DEVICE_ATTR(buspower, 0644, buspower_show, buspower_store);
++
++/**
++ * @todo Need to do more for suspend?
++ */
++/**
++ * Show the Bus Suspend status
++ */
++static ssize_t bussuspend_show(struct device *_dev,
++			       struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Bus Suspend = 0x%x\n",
++		       dwc_otg_get_prtsuspend(otg_dev->core_if));
++}
++
++/**
++ * Set the Bus Suspend status
++ */
++static ssize_t bussuspend_store(struct device *_dev,
++				struct device_attribute *attr,
++				const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_prtsuspend(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(bussuspend, 0644, bussuspend_show, bussuspend_store);
++
++/**
++ * Show the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_show(struct device *_dev,
++				   struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Mode Change Ready Timer Enable = 0x%x\n",
++		       dwc_otg_get_mode_ch_tim(otg_dev->core_if));
++}
++
++/**
++ * Set the Mode Change Ready Timer status
++ */
++static ssize_t mode_ch_tim_en_store(struct device *_dev,
++				    struct device_attribute *attr,
++				    const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 16);
++	dwc_otg_set_mode_ch_tim(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(mode_ch_tim_en, 0644, mode_ch_tim_en_show, mode_ch_tim_en_store);
++
++/**
++ * Show the value of HFIR Frame Interval bitfield
++ */
++static ssize_t fr_interval_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Frame Interval = 0x%x\n",
++		       dwc_otg_get_fr_interval(otg_dev->core_if));
++}
++
++/**
++ * Set the HFIR Frame Interval value
++ */
++static ssize_t fr_interval_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t in = simple_strtoul(buf, NULL, 10);
++	dwc_otg_set_fr_interval(otg_dev->core_if, in);
++	return count;
++}
++
++DEVICE_ATTR(fr_interval, 0644, fr_interval_show, fr_interval_store);
++
++/**
++ * Show the status of Remote Wakeup.
++ */
++static ssize_t remote_wakeup_show(struct device *_dev,
++				  struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	return sprintf(buf,
++		       "Remote Wakeup Sig = %d Enabled = %d LPM Remote Wakeup = %d\n",
++		       dwc_otg_get_remotewakesig(otg_dev->core_if),
++		       dwc_otg_pcd_get_rmwkup_enable(otg_dev->pcd),
++		       dwc_otg_get_lpm_remotewakeenabled(otg_dev->core_if));
++#else
++	return sprintf(buf, "Host Only Mode!\n");
++#endif /* DWC_HOST_ONLY */
++}
++
++/**
++ * Initiate a remote wakeup of the host.  The Device control register
++ * Remote Wakeup Signal bit is written if the PCD Remote wakeup enable
++ * flag is set.
++ *
++ */
++static ssize_t remote_wakeup_store(struct device *_dev,
++				   struct device_attribute *attr,
++				   const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (val & 1) {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 1);
++	} else {
++		dwc_otg_pcd_remote_wakeup(otg_dev->pcd, 0);
++	}
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(remote_wakeup, S_IRUGO | S_IWUSR, remote_wakeup_show,
++	    remote_wakeup_store);
++
++/**
++ * Show the whether core is hibernated or not.
++ */
++static ssize_t rem_wakeup_pwrdn_show(struct device *_dev,
++				     struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (dwc_otg_get_core_state(otg_dev->core_if)) {
++		DWC_PRINTF("Core is in hibernation\n");
++	} else {
++		DWC_PRINTF("Core is not in hibernation\n");
++	}
++#endif /* DWC_HOST_ONLY */
++	return 0;
++}
++
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/**
++ * Initiate a remote wakeup of the device to exit from hibernation.
++ */
++static ssize_t rem_wakeup_pwrdn_store(struct device *_dev,
++				      struct device_attribute *attr,
++				      const char *buf, size_t count)
++{
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_device_hibernation_restore(otg_dev->core_if, 1, 0);
++#endif
++	return count;
++}
++
++DEVICE_ATTR(rem_wakeup_pwrdn, S_IRUGO | S_IWUSR, rem_wakeup_pwrdn_show,
++	    rem_wakeup_pwrdn_store);
++
++static ssize_t disconnect_us(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++
++#ifndef DWC_HOST_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++	DWC_PRINTF("The Passed value is %04x\n", val);
++
++	dwc_otg_pcd_disconnect_us(otg_dev->pcd, 50);
++
++#endif /* DWC_HOST_ONLY */
++	return count;
++}
++
++DEVICE_ATTR(disconnect_us, S_IWUSR, 0, disconnect_us);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t regdump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_dump_global_registers(otg_dev->core_if);
++	if (dwc_otg_is_host_mode(otg_dev->core_if)) {
++		dwc_otg_dump_host_registers(otg_dev->core_if);
++	} else {
++		dwc_otg_dump_dev_registers(otg_dev->core_if);
++
++	}
++	return sprintf(buf, "Register Dump\n");
++}
++
++DEVICE_ATTR(regdump, S_IRUGO | S_IWUSR, regdump_show, 0);
++
++/**
++ * Dump global registers and either host or device registers (depending on the
++ * current mode of the core).
++ */
++static ssize_t spramdump_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_dump_spram(otg_dev->core_if);
++
++	return sprintf(buf, "SPRAM Dump\n");
++}
++
++DEVICE_ATTR(spramdump, S_IRUGO | S_IWUSR, spramdump_show, 0);
++
++/**
++ * Dump the current hcd state.
++ */
++static ssize_t hcddump_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_hcd_dump_state(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump\n");
++}
++
++DEVICE_ATTR(hcddump, S_IRUGO | S_IWUSR, hcddump_show, 0);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ */
++static ssize_t hcd_frrem_show(struct device *_dev,
++			      struct device_attribute *attr, char *buf)
++{
++#ifndef DWC_DEVICE_ONLY
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	dwc_otg_hcd_dump_frrem(otg_dev->hcd);
++#endif /* DWC_DEVICE_ONLY */
++	return sprintf(buf, "HCD Dump Frame Remaining\n");
++}
++
++DEVICE_ATTR(hcd_frrem, S_IRUGO | S_IWUSR, hcd_frrem_show, 0);
++
++/**
++ * Displays the time required to read the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is read).
++ */
++#define RW_REG_COUNT 10000000
++#define MSEC_PER_JIFFIE 1000/HZ
++static ssize_t rd_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to read GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(rd_reg_test, S_IRUGO | S_IWUSR, rd_reg_test_show, 0);
++
++/**
++ * Displays the time required to write the GNPTXFSIZ register many times (the
++ * output shows the number of times the register is written).
++ */
++static ssize_t wr_reg_test_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t reg_val;
++	int i;
++	int time;
++	int start_jiffies;
++
++	printk("HZ %d, MSEC_PER_JIFFIE %d, loops_per_jiffy %lu\n",
++	       HZ, MSEC_PER_JIFFIE, loops_per_jiffy);
++	reg_val = dwc_otg_get_gnptxfsiz(otg_dev->core_if);
++	start_jiffies = jiffies;
++	for (i = 0; i < RW_REG_COUNT; i++) {
++		dwc_otg_set_gnptxfsiz(otg_dev->core_if, reg_val);
++	}
++	time = jiffies - start_jiffies;
++	return sprintf(buf,
++		       "Time to write GNPTXFSIZ reg %d times: %d msecs (%d jiffies)\n",
++		       RW_REG_COUNT, time * MSEC_PER_JIFFIE, time);
++}
++
++DEVICE_ATTR(wr_reg_test, S_IRUGO | S_IWUSR, wr_reg_test_show, 0);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++
++/**
++* Show the lpm_response attribute.
++*/
++static ssize_t lpmresp_show(struct device *_dev,
++			    struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if))
++		return sprintf(buf, "** LPM is DISABLED **\n");
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return sprintf(buf, "** Current mode is not device mode\n");
++	}
++	return sprintf(buf, "lpm_response = %d\n",
++		       dwc_otg_get_lpmresponse(otg_dev->core_if));
++}
++
++/**
++* Store the lpm_response attribute.
++*/
++static ssize_t lpmresp_store(struct device *_dev,
++			     struct device_attribute *attr,
++			     const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	uint32_t val = simple_strtoul(buf, NULL, 16);
++
++	if (!dwc_otg_get_param_lpm_enable(otg_dev->core_if)) {
++		return 0;
++	}
++
++	if (!dwc_otg_is_device_mode(otg_dev->core_if)) {
++		return 0;
++	}
++
++	dwc_otg_set_lpmresponse(otg_dev->core_if, val);
++	return count;
++}
++
++DEVICE_ATTR(lpm_response, S_IRUGO | S_IWUSR, lpmresp_show, lpmresp_store);
++
++/**
++* Show the sleep_status attribute.
++*/
++static ssize_t sleepstatus_show(struct device *_dev,
++				struct device_attribute *attr, char *buf)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	return sprintf(buf, "Sleep Status = %d\n",
++		       dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if));
++}
++
++/**
++ * Store the sleep_status attribure.
++ */
++static ssize_t sleepstatus_store(struct device *_dev,
++				 struct device_attribute *attr,
++				 const char *buf, size_t count)
++{
++        dwc_otg_device_t *otg_dev = dwc_otg_drvdev(_dev);
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	if (dwc_otg_get_lpm_portsleepstatus(otg_dev->core_if)) {
++		if (dwc_otg_is_host_mode(core_if)) {
++
++			DWC_PRINTF("Host initiated resume\n");
++			dwc_otg_set_prtresume(otg_dev->core_if, 1);
++		}
++	}
++
++	return count;
++}
++
++DEVICE_ATTR(sleep_status, S_IRUGO | S_IWUSR, sleepstatus_show,
++	    sleepstatus_store);
++
++#endif /* CONFIG_USB_DWC_OTG_LPM_ENABLE */
++
++/**@}*/
++
++/**
++ * Create the device files
++ */
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++        struct platform_device *dev
++#endif
++    )
++{
++	int error;
++
++	error = device_create_file(&dev->dev, &dev_attr_regoffset);
++	error = device_create_file(&dev->dev, &dev_attr_regvalue);
++	error = device_create_file(&dev->dev, &dev_attr_mode);
++	error = device_create_file(&dev->dev, &dev_attr_hnpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_srpcapable);
++	error = device_create_file(&dev->dev, &dev_attr_hsic_connect);
++	error = device_create_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	error = device_create_file(&dev->dev, &dev_attr_hnp);
++	error = device_create_file(&dev->dev, &dev_attr_srp);
++	error = device_create_file(&dev->dev, &dev_attr_buspower);
++	error = device_create_file(&dev->dev, &dev_attr_bussuspend);
++	error = device_create_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	error = device_create_file(&dev->dev, &dev_attr_fr_interval);
++	error = device_create_file(&dev->dev, &dev_attr_busconnected);
++	error = device_create_file(&dev->dev, &dev_attr_gotgctl);
++	error = device_create_file(&dev->dev, &dev_attr_gusbcfg);
++	error = device_create_file(&dev->dev, &dev_attr_grxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gnptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_gpvndctl);
++	error = device_create_file(&dev->dev, &dev_attr_ggpio);
++	error = device_create_file(&dev->dev, &dev_attr_guid);
++	error = device_create_file(&dev->dev, &dev_attr_gsnpsid);
++	error = device_create_file(&dev->dev, &dev_attr_devspeed);
++	error = device_create_file(&dev->dev, &dev_attr_enumspeed);
++	error = device_create_file(&dev->dev, &dev_attr_hptxfsiz);
++	error = device_create_file(&dev->dev, &dev_attr_hprt0);
++	error = device_create_file(&dev->dev, &dev_attr_remote_wakeup);
++	error = device_create_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	error = device_create_file(&dev->dev, &dev_attr_disconnect_us);
++	error = device_create_file(&dev->dev, &dev_attr_regdump);
++	error = device_create_file(&dev->dev, &dev_attr_spramdump);
++	error = device_create_file(&dev->dev, &dev_attr_hcddump);
++	error = device_create_file(&dev->dev, &dev_attr_hcd_frrem);
++	error = device_create_file(&dev->dev, &dev_attr_rd_reg_test);
++	error = device_create_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	error = device_create_file(&dev->dev, &dev_attr_lpm_response);
++	error = device_create_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
++
++/**
++ * Remove the device files
++ */
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++	struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    )
++{
++	device_remove_file(&dev->dev, &dev_attr_regoffset);
++	device_remove_file(&dev->dev, &dev_attr_regvalue);
++	device_remove_file(&dev->dev, &dev_attr_mode);
++	device_remove_file(&dev->dev, &dev_attr_hnpcapable);
++	device_remove_file(&dev->dev, &dev_attr_srpcapable);
++	device_remove_file(&dev->dev, &dev_attr_hsic_connect);
++	device_remove_file(&dev->dev, &dev_attr_inv_sel_hsic);
++	device_remove_file(&dev->dev, &dev_attr_hnp);
++	device_remove_file(&dev->dev, &dev_attr_srp);
++	device_remove_file(&dev->dev, &dev_attr_buspower);
++	device_remove_file(&dev->dev, &dev_attr_bussuspend);
++	device_remove_file(&dev->dev, &dev_attr_mode_ch_tim_en);
++	device_remove_file(&dev->dev, &dev_attr_fr_interval);
++	device_remove_file(&dev->dev, &dev_attr_busconnected);
++	device_remove_file(&dev->dev, &dev_attr_gotgctl);
++	device_remove_file(&dev->dev, &dev_attr_gusbcfg);
++	device_remove_file(&dev->dev, &dev_attr_grxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gnptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_gpvndctl);
++	device_remove_file(&dev->dev, &dev_attr_ggpio);
++	device_remove_file(&dev->dev, &dev_attr_guid);
++	device_remove_file(&dev->dev, &dev_attr_gsnpsid);
++	device_remove_file(&dev->dev, &dev_attr_devspeed);
++	device_remove_file(&dev->dev, &dev_attr_enumspeed);
++	device_remove_file(&dev->dev, &dev_attr_hptxfsiz);
++	device_remove_file(&dev->dev, &dev_attr_hprt0);
++	device_remove_file(&dev->dev, &dev_attr_remote_wakeup);
++	device_remove_file(&dev->dev, &dev_attr_rem_wakeup_pwrdn);
++	device_remove_file(&dev->dev, &dev_attr_disconnect_us);
++	device_remove_file(&dev->dev, &dev_attr_regdump);
++	device_remove_file(&dev->dev, &dev_attr_spramdump);
++	device_remove_file(&dev->dev, &dev_attr_hcddump);
++	device_remove_file(&dev->dev, &dev_attr_hcd_frrem);
++	device_remove_file(&dev->dev, &dev_attr_rd_reg_test);
++	device_remove_file(&dev->dev, &dev_attr_wr_reg_test);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	device_remove_file(&dev->dev, &dev_attr_lpm_response);
++	device_remove_file(&dev->dev, &dev_attr_sleep_status);
++#endif
++}
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_attr.h b/drivers/usb/host/dwc_otg/dwc_otg_attr.h
+new file mode 100644
+index 0000000..e10b67f
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_attr.h
+@@ -0,0 +1,89 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_attr.h $
++ * $Revision: #13 $
++ * $Date: 2010/06/21 $
++ * $Change: 1532021 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_ATTR_H__)
++#define __DWC_OTG_ATTR_H__
++
++/** @file
++ * This file contains the interface to the Linux device attributes.
++ */
++extern struct device_attribute dev_attr_regoffset;
++extern struct device_attribute dev_attr_regvalue;
++
++extern struct device_attribute dev_attr_mode;
++extern struct device_attribute dev_attr_hnpcapable;
++extern struct device_attribute dev_attr_srpcapable;
++extern struct device_attribute dev_attr_hnp;
++extern struct device_attribute dev_attr_srp;
++extern struct device_attribute dev_attr_buspower;
++extern struct device_attribute dev_attr_bussuspend;
++extern struct device_attribute dev_attr_mode_ch_tim_en;
++extern struct device_attribute dev_attr_fr_interval;
++extern struct device_attribute dev_attr_busconnected;
++extern struct device_attribute dev_attr_gotgctl;
++extern struct device_attribute dev_attr_gusbcfg;
++extern struct device_attribute dev_attr_grxfsiz;
++extern struct device_attribute dev_attr_gnptxfsiz;
++extern struct device_attribute dev_attr_gpvndctl;
++extern struct device_attribute dev_attr_ggpio;
++extern struct device_attribute dev_attr_guid;
++extern struct device_attribute dev_attr_gsnpsid;
++extern struct device_attribute dev_attr_devspeed;
++extern struct device_attribute dev_attr_enumspeed;
++extern struct device_attribute dev_attr_hptxfsiz;
++extern struct device_attribute dev_attr_hprt0;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern struct device_attribute dev_attr_lpm_response;
++extern struct device_attribute devi_attr_sleep_status;
++#endif
++
++void dwc_otg_attr_create(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++void dwc_otg_attr_remove(
++#ifdef LM_INTERFACE
++				struct lm_device *dev
++#elif  defined(PCI_INTERFACE)
++				struct pci_dev *dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++#endif
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cfi.c b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
+new file mode 100644
+index 0000000..bbb3d32
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.c
+@@ -0,0 +1,1876 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * This file contains the most of the CFI(Core Feature Interface)
++ * implementation for the OTG.
++ */
++
++#ifdef DWC_UTE_CFI
++
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_cfi.h"
++
++/** This definition should actually migrate to the Portability Library */
++#define DWC_CONSTANT_CPU_TO_LE16(x) (x)
++
++extern dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex);
++
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen);
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req);
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd);
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req);
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req);
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req);
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep);
++
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if);
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue);
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue);
++
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if);
++
++/** This is the header of the all features descriptor */
++static cfi_all_features_header_t all_props_desc_header = {
++	.wVersion = DWC_CONSTANT_CPU_TO_LE16(0x100),
++	.wCoreID = DWC_CONSTANT_CPU_TO_LE16(CFI_CORE_ID_OTG),
++	.wNumFeatures = DWC_CONSTANT_CPU_TO_LE16(9),
++};
++
++/** This is an array of statically allocated feature descriptors */
++static cfi_feature_desc_header_t prop_descs[] = {
++
++	/* FT_ID_DMA_MODE */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_MODE),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(1),
++	 },
++
++	/* FT_ID_DMA_BUFFER_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFFER_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_BUFF_ALIGN */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_BUFF_ALIGN),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_DMA_CONCAT_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CONCAT_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 //.wDataLength  = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DMA_CIRCULAR */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DMA_CIRCULAR),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_THRESHOLD_SETUP */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_THRESHOLD_SETUP),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(6),
++	 },
++
++	/* FT_ID_DFIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_DFIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RO,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_TX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_TX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 },
++
++	/* FT_ID_RX_FIFO_DEPTH */
++	{
++	 .wFeatureID = DWC_CONSTANT_CPU_TO_LE16(FT_ID_RX_FIFO_DEPTH),
++	 .bmAttributes = CFI_FEATURE_ATTR_RW,
++	 .wDataLength = DWC_CONSTANT_CPU_TO_LE16(2),
++	 }
++};
++
++/** The table of feature names */
++cfi_string_t prop_name_table[] = {
++	{FT_ID_DMA_MODE, "dma_mode"},
++	{FT_ID_DMA_BUFFER_SETUP, "buffer_setup"},
++	{FT_ID_DMA_BUFF_ALIGN, "buffer_align"},
++	{FT_ID_DMA_CONCAT_SETUP, "concat_setup"},
++	{FT_ID_DMA_CIRCULAR, "buffer_circular"},
++	{FT_ID_THRESHOLD_SETUP, "threshold_setup"},
++	{FT_ID_DFIFO_DEPTH, "dfifo_depth"},
++	{FT_ID_TX_FIFO_DEPTH, "txfifo_depth"},
++	{FT_ID_RX_FIFO_DEPTH, "rxfifo_depth"},
++	{}
++};
++
++/************************************************************************/
++
++/**
++ * Returns the name of the feature by its ID
++ * or NULL if no featute ID matches.
++ *
++ */
++const uint8_t *get_prop_name(uint16_t prop_id, int *len)
++{
++	cfi_string_t *pstr;
++	*len = 0;
++
++	for (pstr = prop_name_table; pstr && pstr->s; pstr++) {
++		if (pstr->id == prop_id) {
++			*len = DWC_STRLEN(pstr->s);
++			return pstr->s;
++		}
++	}
++	return NULL;
++}
++
++/**
++ * This function handles all CFI specific control requests.
++ *
++ * Return a negative value to stall the DCE.
++ */
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl)
++{
++	int retval = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	cfiobject_t *cfi = pcd->cfi;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t wLen = DWC_LE16_TO_CPU(&ctrl->wLength);
++	uint16_t wValue = DWC_LE16_TO_CPU(&ctrl->wValue);
++	uint16_t wIndex = DWC_LE16_TO_CPU(&ctrl->wIndex);
++	uint32_t regaddr = 0;
++	uint32_t regval = 0;
++
++	/* Save this Control Request in the CFI object.
++	 * The data field will be assigned in the data stage completion CB function.
++	 */
++	cfi->ctrl_req = *ctrl;
++	cfi->ctrl_req.data = NULL;
++
++	cfi->need_gadget_att = 0;
++	cfi->need_status_in_complete = 0;
++
++	switch (ctrl->bRequest) {
++	case VEN_CORE_GET_FEATURES:
++		retval = cfi_core_features_buf(cfi->buf_in.buf, CFI_IN_BUF_LEN);
++		if (retval >= 0) {
++			//dump_msg(cfi->buf_in.buf, retval);
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		retval = 0;
++		break;
++
++	case VEN_CORE_GET_FEATURE:
++		CFI_INFO("VEN_CORE_GET_FEATURE\n");
++		retval = cfi_get_feature_value(cfi->buf_in.buf, CFI_IN_BUF_LEN,
++					       pcd, ctrl);
++		if (retval >= 0) {
++			ep = &pcd->ep0;
++
++			retval = min((uint16_t) retval, wLen);
++			/* Transfer this buffer to the host through the EP0-IN EP */
++			ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++			ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++			ep->dwc_ep.xfer_len = retval;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			pcd->ep0_pending = 1;
++			dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		}
++		CFI_INFO("VEN_CORE_GET_FEATURE=%d\n", retval);
++		dump_msg(cfi->buf_in.buf, retval);
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		CFI_INFO("VEN_CORE_SET_FEATURE\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the feature to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	case VEN_CORE_RESET_FEATURES:
++		CFI_INFO("VEN_CORE_RESET_FEATURES\n");
++		cfi->need_gadget_att = 1;
++		cfi->need_status_in_complete = 1;
++		retval = cfi_preproc_reset(pcd, ctrl);
++		CFI_INFO("VEN_CORE_RESET_FEATURES = (%d)\n", retval);
++		break;
++
++	case VEN_CORE_ACTIVATE_FEATURES:
++		CFI_INFO("VEN_CORE_ACTIVATE_FEATURES\n");
++		break;
++
++	case VEN_CORE_READ_REGISTER:
++		CFI_INFO("VEN_CORE_READ_REGISTER\n");
++		/* wValue optionally contains the HI WORD of the register offset and
++		 * wIndex contains the LOW WORD of the register offset
++		 */
++		if (wValue == 0) {
++			/* @TODO - MAS - fix the access to the base field */
++			regaddr = 0;
++			//regaddr = (uint32_t) pcd->otg_dev->os_dep.base;
++			//GET_CORE_IF(pcd)->co
++			regaddr |= wIndex;
++		} else {
++			regaddr = (wValue << 16) | wIndex;
++		}
++
++		/* Read a 32-bit value of the memory at the regaddr */
++		regval = DWC_READ_REG32((uint32_t *) regaddr);
++
++		ep = &pcd->ep0;
++		dwc_memcpy(cfi->buf_in.buf, &regval, sizeof(uint32_t));
++		ep->dwc_ep.is_in = 1;
++		ep->dwc_ep.dma_addr = cfi->buf_in.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_in.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		cfi->need_gadget_att = 0;
++		retval = 0;
++		break;
++
++	case VEN_CORE_WRITE_REGISTER:
++		CFI_INFO("VEN_CORE_WRITE_REGISTER\n");
++		/* Set up an XFER to get the data stage of the control request,
++		 * which is the new value of the register to be modified.
++		 */
++		ep = &pcd->ep0;
++		ep->dwc_ep.is_in = 0;
++		ep->dwc_ep.dma_addr = cfi->buf_out.addr;
++		ep->dwc_ep.start_xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_buff = cfi->buf_out.buf;
++		ep->dwc_ep.xfer_len = wLen;
++		ep->dwc_ep.xfer_count = 0;
++		ep->dwc_ep.sent_zlp = 0;
++		ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++		pcd->ep0_pending = 1;
++		/* Read the control write's data stage */
++		dwc_otg_ep0_start_transfer(coreif, &ep->dwc_ep);
++		retval = 0;
++		break;
++
++	default:
++		retval = -DWC_E_NOT_SUPPORTED;
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function prepares the core features descriptors and copies its
++ * raw representation into the buffer <buf>.
++ *
++ * The buffer structure is as follows:
++ *	all_features_header (8 bytes)
++ *	features_#1 (8 bytes + feature name string length)
++ *	features_#2 (8 bytes + feature name string length)
++ *	.....
++ *	features_#n - where n=the total count of feature descriptors
++ */
++static int cfi_core_features_buf(uint8_t * buf, uint16_t buflen)
++{
++	cfi_feature_desc_header_t *prop_hdr = prop_descs;
++	cfi_feature_desc_header_t *prop;
++	cfi_all_features_header_t *all_props_hdr = &all_props_desc_header;
++	cfi_all_features_header_t *tmp;
++	uint8_t *tmpbuf = buf;
++	const uint8_t *pname = NULL;
++	int i, j, namelen = 0, totlen;
++
++	/* Prepare and copy the core features into the buffer */
++	CFI_INFO("%s:\n", __func__);
++
++	tmp = (cfi_all_features_header_t *) tmpbuf;
++	*tmp = *all_props_hdr;
++	tmpbuf += CFI_ALL_FEATURES_HDR_LEN;
++
++	j = sizeof(prop_descs) / sizeof(cfi_all_features_header_t);
++	for (i = 0; i < j; i++, prop_hdr++) {
++		pname = get_prop_name(prop_hdr->wFeatureID, &namelen);
++		prop = (cfi_feature_desc_header_t *) tmpbuf;
++		*prop = *prop_hdr;
++
++		prop->bNameLen = namelen;
++		prop->wLength =
++		    DWC_CONSTANT_CPU_TO_LE16(CFI_FEATURE_DESC_HDR_LEN +
++					     namelen);
++
++		tmpbuf += CFI_FEATURE_DESC_HDR_LEN;
++		dwc_memcpy(tmpbuf, pname, namelen);
++		tmpbuf += namelen;
++	}
++
++	totlen = tmpbuf - buf;
++
++	if (totlen > 0) {
++		tmp = (cfi_all_features_header_t *) buf;
++		tmp->wTotalLen = DWC_CONSTANT_CPU_TO_LE16(totlen);
++	}
++
++	return totlen;
++}
++
++/**
++ * This function releases all the dynamic memory in the CFI object.
++ */
++static void cfi_release(cfiobject_t * cfiobj)
++{
++	cfi_ep_t *cfiep;
++	dwc_list_link_t *tmp;
++
++	CFI_INFO("%s\n", __func__);
++
++	if (cfiobj->buf_in.buf) {
++		DWC_DMA_FREE(CFI_IN_BUF_LEN, cfiobj->buf_in.buf,
++			     cfiobj->buf_in.addr);
++		cfiobj->buf_in.buf = NULL;
++	}
++
++	if (cfiobj->buf_out.buf) {
++		DWC_DMA_FREE(CFI_OUT_BUF_LEN, cfiobj->buf_out.buf,
++			     cfiobj->buf_out.addr);
++		cfiobj->buf_out.buf = NULL;
++	}
++
++	/* Free the Buffer Setup values for each EP */
++	//list_for_each_entry(cfiep, &cfiobj->active_eps, lh) {
++	DWC_LIST_FOREACH(tmp, &cfiobj->active_eps) {
++		cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		cfi_free_ep_bs_dyn_data(cfiep);
++	}
++}
++
++/**
++ * This function frees the dynamically allocated EP buffer setup data.
++ */
++static void cfi_free_ep_bs_dyn_data(cfi_ep_t * cfiep)
++{
++	if (cfiep->bm_sg) {
++		DWC_FREE(cfiep->bm_sg);
++		cfiep->bm_sg = NULL;
++	}
++
++	if (cfiep->bm_align) {
++		DWC_FREE(cfiep->bm_align);
++		cfiep->bm_align = NULL;
++	}
++
++	if (cfiep->bm_concat) {
++		if (NULL != cfiep->bm_concat->wTxBytes) {
++			DWC_FREE(cfiep->bm_concat->wTxBytes);
++			cfiep->bm_concat->wTxBytes = NULL;
++		}
++		DWC_FREE(cfiep->bm_concat);
++		cfiep->bm_concat = NULL;
++	}
++}
++
++/**
++ * This function initializes the default values of the features
++ * for a specific endpoint and should be called only once when
++ * the EP is enabled first time.
++ */
++static int cfi_ep_init_defaults(struct dwc_otg_pcd *pcd, cfi_ep_t * cfiep)
++{
++	int retval = 0;
++
++	cfiep->bm_sg = DWC_ALLOC(sizeof(ddma_sg_buffer_setup_t));
++	if (NULL == cfiep->bm_sg) {
++		CFI_INFO("Failed to allocate memory for SG feature value\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++
++	/* For the Concatenation feature's default value we do not allocate
++	 * memory for the wTxBytes field - it will be done in the set_feature_value
++	 * request handler.
++	 */
++	cfiep->bm_concat = DWC_ALLOC(sizeof(ddma_concat_buffer_setup_t));
++	if (NULL == cfiep->bm_concat) {
++		CFI_INFO
++		    ("Failed to allocate memory for CONCATENATION feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++
++	cfiep->bm_align = DWC_ALLOC(sizeof(ddma_align_buffer_setup_t));
++	if (NULL == cfiep->bm_align) {
++		CFI_INFO
++		    ("Failed to allocate memory for Alignment feature value\n");
++		DWC_FREE(cfiep->bm_sg);
++		DWC_FREE(cfiep->bm_concat);
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_memset(cfiep->bm_align, 0, sizeof(ddma_align_buffer_setup_t));
++
++	return retval;
++}
++
++/**
++ * The callback function that notifies the CFI on the activation of
++ * an endpoint in the PCD. The following steps are done in this function:
++ *
++ *	Create a dynamically allocated cfi_ep_t object (a CFI wrapper to the PCD's
++ *		active endpoint)
++ *	Create MAX_DMA_DESCS_PER_EP count DMA Descriptors for the EP
++ *	Set the Buffer Mode to standard
++ *	Initialize the default values for all EP modes (SG, Circular, Concat, Align)
++ *	Add the cfi_ep_t object to the list of active endpoints in the CFI object
++ */
++static int cfi_ep_enable(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			 struct dwc_otg_pcd_ep *ep)
++{
++	cfi_ep_t *cfiep;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s: epname=%s; epnum=0x%02x\n", __func__,
++		 "EP_" /*ep->ep.name */ , ep->desc->bEndpointAddress);
++	/* MAS - Check whether this endpoint already is in the list */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++
++	if (NULL == cfiep) {
++		/* Allocate a cfi_ep_t object */
++		cfiep = DWC_ALLOC(sizeof(cfi_ep_t));
++		if (NULL == cfiep) {
++			CFI_INFO
++			    ("Unable to allocate memory for <cfiep> in function %s\n",
++			     __func__);
++			return -DWC_E_NO_MEMORY;
++		}
++		dwc_memset(cfiep, 0, sizeof(cfi_ep_t));
++
++		/* Save the dwc_otg_pcd_ep pointer in the cfiep object */
++		cfiep->ep = ep;
++
++		/* Allocate the DMA Descriptors chain of MAX_DMA_DESCS_PER_EP count */
++		ep->dwc_ep.descs =
++		    DWC_DMA_ALLOC(MAX_DMA_DESCS_PER_EP *
++				  sizeof(dwc_otg_dma_desc_t),
++				  &ep->dwc_ep.descs_dma_addr);
++
++		if (NULL == ep->dwc_ep.descs) {
++			DWC_FREE(cfiep);
++			return -DWC_E_NO_MEMORY;
++		}
++
++		DWC_LIST_INIT(&cfiep->lh);
++
++		/* Set the buffer mode to BM_STANDARD. It will be modified
++		 * when building descriptors for a specific buffer mode */
++		ep->dwc_ep.buff_mode = BM_STANDARD;
++
++		/* Create and initialize the default values for this EP's Buffer modes */
++		if ((retval = cfi_ep_init_defaults(pcd, cfiep)) < 0)
++			return retval;
++
++		/* Add the cfi_ep_t object to the CFI object's list of active endpoints */
++		DWC_LIST_INSERT_TAIL(&cfi->active_eps, &cfiep->lh);
++		retval = 0;
++	} else {		/* The sought EP already is in the list */
++		CFI_INFO("%s: The sought EP already is in the list\n",
++			 __func__);
++	}
++
++	return retval;
++}
++
++/**
++ * This function is called when the data stage of a 3-stage Control Write request
++ * is complete.
++ *
++ */
++static int cfi_ctrl_write_complete(struct cfiobject *cfi,
++				   struct dwc_otg_pcd *pcd)
++{
++	uint32_t addr, reg_value;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	uint8_t *buf = cfi->buf_out.buf;
++	//struct usb_ctrlrequest *ctrl_req = &cfi->ctrl_req_saved;
++	struct cfi_usb_ctrlrequest *ctrl_req = &cfi->ctrl_req;
++	int retval = -DWC_E_NOT_SUPPORTED;
++
++	CFI_INFO("%s\n", __func__);
++
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/*
++	 * Save the pointer to the data stage in the ctrl_req's <data> field.
++	 * The request should be already saved in the command stage by now.
++	 */
++	ctrl_req->data = cfi->buf_out.buf;
++	cfi->need_status_in_complete = 0;
++	cfi->need_gadget_att = 0;
++
++	switch (bRequest) {
++	case VEN_CORE_WRITE_REGISTER:
++		/* The buffer contains raw data of the new value for the register */
++		reg_value = *((uint32_t *) buf);
++		if (wValue == 0) {
++			addr = 0;
++			//addr = (uint32_t) pcd->otg_dev->os_dep.base;
++			addr += wIndex;
++		} else {
++			addr = (wValue << 16) | wIndex;
++		}
++
++		//writel(reg_value, addr);
++
++		retval = 0;
++		cfi->need_status_in_complete = 1;
++		break;
++
++	case VEN_CORE_SET_FEATURE:
++		/* The buffer contains raw data of the new value of the feature */
++		retval = cfi_set_feature_value(pcd);
++		if (retval < 0)
++			return retval;
++
++		cfi->need_status_in_complete = 1;
++		break;
++
++	default:
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function builds the DMA descriptors for the SG buffer mode.
++ */
++static void cfi_build_sg_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++			       dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_sg_buffer_setup_t *sgval = cfiep->bm_sg;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint32_t txsize, off;
++
++	txsize = sgval->wSize;
++	off = sgval->bOffset;
++
++//      CFI_INFO("%s: %s TXSIZE=0x%08x; OFFSET=0x%08x\n",
++//              __func__, cfiep->ep->ep.name, txsize, off);
++
++	for (i = 0; i < sgval->bCount; i++) {
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->buf = buff_addr;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		/* Set the next address of the buffer */
++		buff_addr += txsize + off;
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	/* Save the last DMA descriptor pointer */
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = sgval->bCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Concatenation buffer mode.
++ */
++static void cfi_build_concat_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				   dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_concat_buffer_setup_t *concatval = cfiep->bm_concat;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	struct dwc_otg_dma_desc *desc_last = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++	int i;
++	uint16_t *txsize;
++
++	txsize = concatval->wTxBytes;
++
++	for (i = 0; i < concatval->hdr.bDescCount; i++) {
++		desc->buf = buff_addr;
++		desc->status.b.bs = BS_HOST_BUSY;
++		desc->status.b.l = 0;
++		desc->status.b.ioc = 0;
++		desc->status.b.sp = 0;
++		desc->status.b.bytes = *txsize;
++		desc->status.b.bs = BS_HOST_READY;
++
++		txsize++;
++		/* Set the next address of the buffer */
++		buff_addr += UGETW(ep->desc->wMaxPacketSize);
++		desc_last = desc;
++		desc++;
++	}
++
++	/* Set the last, ioc and sp bits on the Last DMA Descriptor */
++	desc_last->status.b.l = 1;
++	desc_last->status.b.ioc = 1;
++	desc_last->status.b.sp = ep->dwc_ep.sent_zlp;
++	cfiep->dma_desc_last = desc_last;
++	cfiep->desc_count = concatval->hdr.bDescCount;
++}
++
++/**
++ * This function builds the DMA descriptors for the Circular buffer mode
++ */
++static void cfi_build_circ_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				 dwc_otg_pcd_request_t * req)
++{
++	/* @todo: MAS - add implementation when this feature needs to be tested */
++}
++
++/**
++ * This function builds the DMA descriptors for the Alignment buffer mode
++ */
++static void cfi_build_align_descs(struct cfiobject *cfi, cfi_ep_t * cfiep,
++				  dwc_otg_pcd_request_t * req)
++{
++	struct dwc_otg_pcd_ep *ep = cfiep->ep;
++	ddma_align_buffer_setup_t *alignval = cfiep->bm_align;
++	struct dwc_otg_dma_desc *desc = cfiep->ep->dwc_ep.descs;
++	dma_addr_t buff_addr = req->dma;
++
++	desc->status.b.bs = BS_HOST_BUSY;
++	desc->status.b.l = 1;
++	desc->status.b.ioc = 1;
++	desc->status.b.sp = ep->dwc_ep.sent_zlp;
++	desc->status.b.bytes = req->length;
++	/* Adjust the buffer alignment */
++	desc->buf = (buff_addr + alignval->bAlign);
++	desc->status.b.bs = BS_HOST_READY;
++	cfiep->dma_desc_last = desc;
++	cfiep->desc_count = 1;
++}
++
++/**
++ * This function builds the DMA descriptors chain for different modes of the
++ * buffer setup of an endpoint.
++ */
++static void cfi_build_descriptors(struct cfiobject *cfi,
++				  struct dwc_otg_pcd *pcd,
++				  struct dwc_otg_pcd_ep *ep,
++				  dwc_otg_pcd_request_t * req)
++{
++	cfi_ep_t *cfiep;
++
++	/* Get the cfiep by the dwc_otg_pcd_ep */
++	cfiep = get_cfi_ep_by_pcd_ep(cfi, ep);
++	if (NULL == cfiep) {
++		CFI_INFO("%s: Unable to find a matching active endpoint\n",
++			 __func__);
++		return;
++	}
++
++	cfiep->xfer_len = req->length;
++
++	/* Iterate through all the DMA descriptors */
++	switch (cfiep->ep->dwc_ep.buff_mode) {
++	case BM_SG:
++		cfi_build_sg_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CONCAT:
++		cfi_build_concat_descs(cfi, cfiep, req);
++		break;
++
++	case BM_CIRCULAR:
++		cfi_build_circ_descs(cfi, cfiep, req);
++		break;
++
++	case BM_ALIGN:
++		cfi_build_align_descs(cfi, cfiep, req);
++		break;
++
++	default:
++		break;
++	}
++}
++
++/**
++ * Allocate DMA buffer for different Buffer modes.
++ */
++static void *cfi_ep_alloc_buf(struct cfiobject *cfi, struct dwc_otg_pcd *pcd,
++			      struct dwc_otg_pcd_ep *ep, dma_addr_t * dma,
++			      unsigned size, gfp_t flags)
++{
++	return DWC_DMA_ALLOC(size, dma);
++}
++
++/**
++ * This function initializes the CFI object.
++ */
++int init_cfi(cfiobject_t * cfiobj)
++{
++	CFI_INFO("%s\n", __func__);
++
++	/* Allocate a buffer for IN XFERs */
++	cfiobj->buf_in.buf =
++	    DWC_DMA_ALLOC(CFI_IN_BUF_LEN, &cfiobj->buf_in.addr);
++	if (NULL == cfiobj->buf_in.buf) {
++		CFI_INFO("Unable to allocate buffer for INs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Allocate a buffer for OUT XFERs */
++	cfiobj->buf_out.buf =
++	    DWC_DMA_ALLOC(CFI_OUT_BUF_LEN, &cfiobj->buf_out.addr);
++	if (NULL == cfiobj->buf_out.buf) {
++		CFI_INFO("Unable to allocate buffer for OUT\n");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the callback function pointers */
++	cfiobj->ops.release = cfi_release;
++	cfiobj->ops.ep_enable = cfi_ep_enable;
++	cfiobj->ops.ctrl_write_complete = cfi_ctrl_write_complete;
++	cfiobj->ops.build_descriptors = cfi_build_descriptors;
++	cfiobj->ops.ep_alloc_buf = cfi_ep_alloc_buf;
++
++	/* Initialize the list of active endpoints in the CFI object */
++	DWC_LIST_INIT(&cfiobj->active_eps);
++
++	return 0;
++}
++
++/**
++ * This function reads the required feature's current value into the buffer
++ *
++ * @retval: Returns negative as error, or the data length of the feature
++ */
++static int cfi_get_feature_value(uint8_t * buf, uint16_t buflen,
++				 struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	struct dwc_otg_core_if *coreif = GET_CORE_IF(pcd);
++	uint16_t dfifo, rxfifo, txfifo;
++
++	switch (ctrl_req->wIndex) {
++		/* Whether the DDMA is enabled or not */
++	case FT_ID_DMA_MODE:
++		*buf = (coreif->dma_enable && coreif->dma_desc_enable) ? 1 : 0;
++		retval = 1;
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		retval = cfi_ep_get_sg_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		retval = cfi_ep_get_align_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		retval = cfi_ep_get_concat_val(buf, pcd, ctrl_req);
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("GetFeature value (FT_ID_DMA_CIRCULAR)\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("GetFeature value (FT_ID_THRESHOLD_SETUP)\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		dfifo = get_dfifo_size(coreif);
++		*((uint16_t *) buf) = dfifo;
++		retval = sizeof(uint16_t);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval = get_txfifo_size(pcd, ctrl_req->wValue);
++		if (retval >= 0) {
++			txfifo = retval;
++			*((uint16_t *) buf) = txfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = get_rxfifo_size(coreif, ctrl_req->wValue);
++		if (retval >= 0) {
++			rxfifo = retval;
++			*((uint16_t *) buf) = rxfifo;
++			retval = sizeof(uint16_t);
++		}
++		break;
++	}
++
++	return retval;
++}
++
++/**
++ * This function resets the SG for the specified EP to its default value
++ */
++static int cfi_reset_sg_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Alignment for the specified EP to its default value
++ */
++static int cfi_reset_align_val(cfi_ep_t * cfiep)
++{
++	dwc_memset(cfiep->bm_sg, 0, sizeof(ddma_sg_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets the Concatenation for the specified EP to its default value
++ * This function will also set the value of the wTxBytes field to NULL after
++ * freeing the memory previously allocated for this field.
++ */
++static int cfi_reset_concat_val(cfi_ep_t * cfiep)
++{
++	/* First we need to free the wTxBytes field */
++	if (cfiep->bm_concat->wTxBytes) {
++		DWC_FREE(cfiep->bm_concat->wTxBytes);
++		cfiep->bm_concat->wTxBytes = NULL;
++	}
++
++	dwc_memset(cfiep->bm_concat, 0, sizeof(ddma_concat_buffer_setup_t));
++	return 0;
++}
++
++/**
++ * This function resets all the buffer setups of the specified endpoint
++ */
++static int cfi_ep_reset_all_setup_vals(cfi_ep_t * cfiep)
++{
++	cfi_reset_sg_val(cfiep);
++	cfi_reset_align_val(cfiep);
++	cfi_reset_concat_val(cfiep);
++	return 0;
++}
++
++static int cfi_handle_reset_fifo_val(struct dwc_otg_pcd *pcd, uint8_t ep_addr,
++				     uint8_t rx_rst, uint8_t tx_rst)
++{
++	int retval = -DWC_E_INVALID;
++	uint16_t tx_siz[15];
++	uint16_t rx_siz = 0;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++
++	if (rx_rst) {
++		rx_siz = params->dev_rx_fifo_size;
++		params->dev_rx_fifo_size = GET_CORE_IF(pcd)->init_rxfsiz;
++	}
++
++	if (tx_rst) {
++		if (ep_addr == 0) {
++			int i;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				tx_siz[i] =
++				    core_if->core_params->dev_tx_fifo_size[i];
++				core_if->core_params->dev_tx_fifo_size[i] =
++				    core_if->init_txfsiz[i];
++			}
++		} else {
++
++			ep = get_ep_by_addr(pcd, ep_addr);
++
++			if (NULL == ep) {
++				CFI_INFO
++				    ("%s: Unable to get the endpoint addr=0x%02x\n",
++				     __func__, ep_addr);
++				return -DWC_E_INVALID;
++			}
++
++			tx_siz[0] =
++			    params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num -
++						     1];
++			params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] =
++			    GET_CORE_IF(pcd)->init_txfsiz[ep->
++							  dwc_ep.tx_fifo_num -
++							  1];
++		}
++	}
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error resetting the feature Reset All(FIFO size)\n",
++		     __func__);
++		if (rx_rst) {
++			params->dev_rx_fifo_size = rx_siz;
++		}
++
++		if (tx_rst) {
++			if (ep_addr == 0) {
++				int i;
++				for (i = 0; i < core_if->hwcfg4.b.num_in_eps;
++				     i++) {
++					core_if->
++					    core_params->dev_tx_fifo_size[i] =
++					    tx_siz[i];
++				}
++			} else {
++				params->dev_tx_fifo_size[ep->
++							 dwc_ep.tx_fifo_num -
++							 1] = tx_siz[0];
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_all(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	retval = cfi_handle_reset_fifo_val(pcd, addr, 1, 1);
++	if (retval < 0) {
++		return retval;
++	}
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_ep_reset_all_setup_vals(cfiep);
++		cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_ep_reset_all_setup_vals(cfiep);
++			cfiep->ep->dwc_ep.buff_mode = BM_STANDARD;
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Reset All\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_dma_buff_setup(struct dwc_otg_pcd *pcd,
++					   uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_sg_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_sg_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Buffer Setup\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_concat_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_concat_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_concat_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Concatenation Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++}
++
++static int cfi_handle_reset_align_val(struct dwc_otg_pcd *pcd, uint8_t addr)
++{
++	int retval = 0;
++	cfi_ep_t *cfiep;
++	cfiobject_t *cfi = pcd->cfi;
++	dwc_list_link_t *tmp;
++
++	/* If the EP address is known then reset the features for only that EP */
++	if (addr) {
++		cfiep = get_cfi_ep_by_addr(pcd->cfi, addr);
++		if (NULL == cfiep) {
++			CFI_INFO("%s: Error getting the EP address 0x%02x\n",
++				 __func__, addr);
++			return -DWC_E_INVALID;
++		}
++		retval = cfi_reset_align_val(cfiep);
++	}
++	/* Otherwise (wValue == 0), reset all features of all EP's */
++	else {
++		/* Traverse all the active EP's and reset the feature(s) value(s) */
++		//list_for_each_entry(cfiep, &cfi->active_eps, lh) {
++		DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++			cfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++			retval = cfi_reset_align_val(cfiep);
++			if (retval < 0) {
++				CFI_INFO
++				    ("%s: Error resetting the feature Aliignment Value\n",
++				     __func__);
++				return retval;
++			}
++		}
++	}
++	return retval;
++
++}
++
++static int cfi_preproc_reset(struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = 0;
++
++	switch (req->wIndex) {
++	case 0:
++		/* Reset all features */
++		retval = cfi_handle_reset_all(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Reset the SG buffer setup */
++		retval =
++		    cfi_handle_reset_dma_buff_setup(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Reset the Concatenation buffer setup */
++		retval = cfi_handle_reset_concat_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		/* Reset the Alignment buffer setup */
++		retval = cfi_handle_reset_align_val(pcd, req->wValue & 0xff);
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		retval =
++		    cfi_handle_reset_fifo_val(pcd, req->wValue & 0xff, 0, 1);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		retval = cfi_handle_reset_fifo_val(pcd, 0, 1, 0);
++		pcd->cfi->need_gadget_att = 0;
++		break;
++	default:
++		break;
++	}
++	return retval;
++}
++
++/**
++ * This function sets a new value for the SG buffer setup.
++ */
++static int cfi_ep_set_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t inaddr, outaddr;
++	cfi_ep_t *epin, *epout;
++	ddma_sg_buffer_setup_t *psgval;
++	uint32_t desccount, size;
++
++	CFI_INFO("%s\n", __func__);
++
++	psgval = (ddma_sg_buffer_setup_t *) buf;
++	desccount = (uint32_t) psgval->bCount;
++	size = (uint32_t) psgval->wSize;
++
++	/* Check the DMA descriptor count */
++	if ((desccount > MAX_DMA_DESCS_PER_EP) || (desccount == 0)) {
++		CFI_INFO
++		    ("%s: The count of DMA Descriptors should be between 1 and %d\n",
++		     __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	/* Check the DMA descriptor count */
++
++	if (size == 0) {
++
++		CFI_INFO("%s: The transfer size should be at least 1 byte\n",
++			 __func__);
++
++		return -DWC_E_INVALID;
++
++	}
++
++	inaddr = psgval->bInEndpointAddress;
++	outaddr = psgval->bOutEndpointAddress;
++
++	epin = get_cfi_ep_by_addr(pcd->cfi, inaddr);
++	epout = get_cfi_ep_by_addr(pcd->cfi, outaddr);
++
++	if (NULL == epin || NULL == epout) {
++		CFI_INFO
++		    ("%s: Unable to get the endpoints inaddr=0x%02x outaddr=0x%02x\n",
++		     __func__, inaddr, outaddr);
++		return -DWC_E_INVALID;
++	}
++
++	epin->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epin->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	epout->ep->dwc_ep.buff_mode = BM_SG;
++	dwc_memcpy(epout->bm_sg, psgval, sizeof(ddma_sg_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_alignment_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	cfi_ep_t *ep;
++	uint8_t addr;
++	ddma_align_buffer_setup_t *palignval;
++
++	palignval = (ddma_align_buffer_setup_t *) buf;
++	addr = palignval->bEndpointAddress;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_ALIGN;
++	dwc_memcpy(ep->bm_align, palignval, sizeof(ddma_align_buffer_setup_t));
++
++	return 0;
++}
++
++/**
++ * This function sets a new value for the Concatenation buffer setup.
++ */
++static int cfi_ep_set_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd)
++{
++	uint8_t addr;
++	cfi_ep_t *ep;
++	struct _ddma_concat_buffer_setup_hdr *pConcatValHdr;
++	uint16_t *pVals;
++	uint32_t desccount;
++	int i;
++	uint16_t mps;
++
++	pConcatValHdr = (struct _ddma_concat_buffer_setup_hdr *)buf;
++	desccount = (uint32_t) pConcatValHdr->bDescCount;
++	pVals = (uint16_t *) (buf + BS_CONCAT_VAL_HDR_LEN);
++
++	/* Check the DMA descriptor count */
++	if (desccount > MAX_DMA_DESCS_PER_EP) {
++		CFI_INFO("%s: Maximum DMA Descriptor count should be %d\n",
++			 __func__, MAX_DMA_DESCS_PER_EP);
++		return -DWC_E_INVALID;
++	}
++
++	addr = pConcatValHdr->bEndpointAddress;
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, addr);
++		return -DWC_E_INVALID;
++	}
++
++	mps = UGETW(ep->ep->desc->wMaxPacketSize);
++
++#if 0
++	for (i = 0; i < desccount; i++) {
++		CFI_INFO("%s: wTxSize[%d]=0x%04x\n", __func__, i, pVals[i]);
++	}
++	CFI_INFO("%s: epname=%s; mps=%d\n", __func__, ep->ep->ep.name, mps);
++#endif
++
++	/* Check the wTxSizes to be less than or equal to the mps */
++	for (i = 0; i < desccount; i++) {
++		if (pVals[i] > mps) {
++			CFI_INFO
++			    ("%s: ERROR - the wTxSize[%d] should be <= MPS (wTxSize=%d)\n",
++			     __func__, i, pVals[i]);
++			return -DWC_E_INVALID;
++		}
++	}
++
++	ep->ep->dwc_ep.buff_mode = BM_CONCAT;
++	dwc_memcpy(ep->bm_concat, pConcatValHdr, BS_CONCAT_VAL_HDR_LEN);
++
++	/* Free the previously allocated storage for the wTxBytes */
++	if (ep->bm_concat->wTxBytes) {
++		DWC_FREE(ep->bm_concat->wTxBytes);
++	}
++
++	/* Allocate a new storage for the wTxBytes field */
++	ep->bm_concat->wTxBytes =
++	    DWC_ALLOC(sizeof(uint16_t) * pConcatValHdr->bDescCount);
++	if (NULL == ep->bm_concat->wTxBytes) {
++		CFI_INFO("%s: Unable to allocate memory\n", __func__);
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Copy the new values into the wTxBytes filed */
++	dwc_memcpy(ep->bm_concat->wTxBytes, buf + BS_CONCAT_VAL_HDR_LEN,
++		   sizeof(uint16_t) * pConcatValHdr->bDescCount);
++
++	return 0;
++}
++
++/**
++ * This function calculates the total of all FIFO sizes
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static uint16_t get_dfifo_size(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t dfifo_total = 0;
++	int i;
++
++	/* The shared RxFIFO size */
++	dfifo_total =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	/* Add up each TxFIFO size to the total */
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_total += params->dev_tx_fifo_size[i];
++	}
++
++	return dfifo_total;
++}
++
++/**
++ * This function returns Rx FIFO size
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_rxfifo_size(dwc_otg_core_if_t * core_if, uint16_t wValue)
++{
++	switch (wValue >> 8) {
++	case 0:
++		return (core_if->pwron_rxfsiz <
++			32768) ? core_if->pwron_rxfsiz : 32768;
++		break;
++	case 1:
++		return core_if->core_params->dev_rx_fifo_size;
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function returns Tx FIFO size for IN EP
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return The total of data FIFO sizes.
++ *
++ */
++static int32_t get_txfifo_size(struct dwc_otg_pcd *pcd, uint16_t wValue)
++{
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_by_addr(pcd, wValue & 0xff);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	if (!ep->dwc_ep.is_in) {
++		CFI_INFO
++		    ("%s: No Tx FIFO assingned to the Out endpoint addr=0x%02x\n",
++		     __func__, wValue & 0xff);
++		return -DWC_E_INVALID;
++	}
++
++	switch (wValue >> 8) {
++	case 0:
++		return (GET_CORE_IF(pcd)->pwron_txfsiz
++			[ep->dwc_ep.tx_fifo_num - 1] <
++			768) ? GET_CORE_IF(pcd)->pwron_txfsiz[ep->
++							      dwc_ep.tx_fifo_num
++							      - 1] : 32768;
++		break;
++	case 1:
++		return GET_CORE_IF(pcd)->core_params->
++		    dev_tx_fifo_size[ep->dwc_ep.num - 1];
++		break;
++	default:
++		return -DWC_E_INVALID;
++		break;
++	}
++}
++
++/**
++ * This function checks if the submitted combination of
++ * device mode FIFO sizes is possible or not.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if possible, 0 otherwise.
++ *
++ */
++static uint8_t check_fifo_sizes(dwc_otg_core_if_t * core_if)
++{
++	uint16_t dfifo_actual = 0;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint16_t start_addr = 0;
++	int i;
++
++	dfifo_actual =
++	    params->dev_rx_fifo_size + params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dfifo_actual += params->dev_tx_fifo_size[i];
++	}
++
++	if (dfifo_actual > core_if->total_fifo_size) {
++		return 0;
++	}
++
++	if (params->dev_rx_fifo_size > 32768 || params->dev_rx_fifo_size < 16)
++		return 0;
++
++	if (params->dev_nperio_tx_fifo_size > 32768
++	    || params->dev_nperio_tx_fifo_size < 16)
++		return 0;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > 768
++		    || params->dev_tx_fifo_size[i] < 4)
++			return 0;
++	}
++
++	if (params->dev_rx_fifo_size > core_if->pwron_rxfsiz)
++		return 0;
++	start_addr = params->dev_rx_fifo_size;
++
++	if (params->dev_nperio_tx_fifo_size > core_if->pwron_gnptxfsiz)
++		return 0;
++	start_addr += params->dev_nperio_tx_fifo_size;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++		if (params->dev_tx_fifo_size[i] > core_if->pwron_txfsiz[i])
++			return 0;
++		start_addr += params->dev_tx_fifo_size[i];
++	}
++
++	return 1;
++}
++
++/**
++ * This function resizes Device mode FIFOs
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ * @return 1 if successful, 0 otherwise
++ *
++ */
++static uint8_t resize_fifos(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize[15];
++
++	uint32_t rx_fsz_bak;
++	uint32_t nptxfsz_bak;
++	uint32_t txfsz_bak[15];
++
++	uint16_t start_address;
++	uint8_t retval = 1;
++
++	if (!check_fifo_sizes(core_if)) {
++		return 0;
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		rx_fsz_bak = DWC_READ_REG32(&global_regs->grxfsiz);
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		/*
++		 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++		 * Indexes of the FIFO size module parameters in the
++		 * dev_tx_fifo_size array and the FIFO size registers in
++		 * the dtxfsiz array run from 0 to 14.
++		 */
++
++		/* Non-periodic Tx FIFO */
++		nptxfsz_bak = DWC_READ_REG32(&global_regs->gnptxfsiz);
++		nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++		start_address = params->dev_rx_fifo_size;
++		nptxfifosize.b.startaddr = start_address;
++
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++
++		start_address += nptxfifosize.b.depth;
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			txfsz_bak[i] = DWC_READ_REG32(&global_regs->dtxfsiz[i]);
++
++			txfifosize[i].b.depth = params->dev_tx_fifo_size[i];
++			txfifosize[i].b.startaddr = start_address;
++			DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++					txfifosize[i].d32);
++
++			start_address += txfifosize[i].b.depth;
++		}
++
++		/** Check if register values are set correctly */
++		if (rx_fifo_size != DWC_READ_REG32(&global_regs->grxfsiz)) {
++			retval = 0;
++		}
++
++		if (nptxfifosize.d32 != DWC_READ_REG32(&global_regs->gnptxfsiz)) {
++			retval = 0;
++		}
++
++		for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++			if (txfifosize[i].d32 !=
++			    DWC_READ_REG32(&global_regs->dtxfsiz[i])) {
++				retval = 0;
++			}
++		}
++
++		/** If register values are not set correctly, reset old values */
++		if (retval == 0) {
++			DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fsz_bak);
++
++			/* Non-periodic Tx FIFO */
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfsz_bak);
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfsz_bak[i]);
++			}
++		}
++	} else {
++		return 0;
++	}
++
++	/* Flush the FIFOs */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++	dwc_otg_flush_rx_fifo(core_if);
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_ep_set_tx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	uint16_t ep_addr;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	tx_fifo_size_setup_t *ptxfifoval;
++
++	ptxfifoval = (tx_fifo_size_setup_t *) buf;
++	ep_addr = ptxfifoval->bEndpointAddress;
++	size = ptxfifoval->wDepth;
++
++	ep = get_ep_by_addr(pcd, ep_addr);
++
++	CFI_INFO
++	    ("%s: Set Tx FIFO size: endpoint addr=0x%02x, depth=%d, FIFO Num=%d\n",
++	     __func__, ep_addr, size, ep->dwc_ep.tx_fifo_num);
++
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint addr=0x%02x\n",
++			 __func__, ep_addr);
++		return -DWC_E_INVALID;
++	}
++
++	fsiz = params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1];
++	params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO
++		    ("%s: Error setting the feature Tx FIFO Size for EP%d\n",
++		     __func__, ep_addr);
++		params->dev_tx_fifo_size[ep->dwc_ep.tx_fifo_num - 1] = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the buffer Alignment setup.
++ */
++static int cfi_set_rx_fifo_val(uint8_t * buf, dwc_otg_pcd_t * pcd)
++{
++	int retval;
++	uint32_t fsiz;
++	uint16_t size;
++	dwc_otg_core_params_t *params = GET_CORE_IF(pcd)->core_params;
++	rx_fifo_size_setup_t *prxfifoval;
++
++	prxfifoval = (rx_fifo_size_setup_t *) buf;
++	size = prxfifoval->wDepth;
++
++	fsiz = params->dev_rx_fifo_size;
++	params->dev_rx_fifo_size = size;
++
++	if (resize_fifos(GET_CORE_IF(pcd))) {
++		retval = 0;
++	} else {
++		CFI_INFO("%s: Error setting the feature Rx FIFO Size\n",
++			 __func__);
++		params->dev_rx_fifo_size = fsiz;
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++/**
++ * This function reads the SG of an EP's buffer setup into the buffer buf
++ */
++static int cfi_ep_get_sg_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++			     struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_sg, BS_SG_VAL_DESC_LEN);
++	retval = BS_SG_VAL_DESC_LEN;
++	return retval;
++}
++
++/**
++ * This function reads the Concatenation value of an EP's buffer mode into
++ * the buffer buf
++ */
++static int cfi_ep_get_concat_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				 struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++	uint8_t desc_count;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	/* Copy the header to the buffer */
++	dwc_memcpy(buf, ep->bm_concat, BS_CONCAT_VAL_HDR_LEN);
++	/* Advance the buffer pointer by the header size */
++	buf += BS_CONCAT_VAL_HDR_LEN;
++
++	desc_count = ep->bm_concat->hdr.bDescCount;
++	/* Copy alll the wTxBytes to the buffer */
++	dwc_memcpy(buf, ep->bm_concat->wTxBytes, sizeof(uid16_t) * desc_count);
++
++	retval = BS_CONCAT_VAL_HDR_LEN + sizeof(uid16_t) * desc_count;
++	return retval;
++}
++
++/**
++ * This function reads the buffer Alignment value of an EP's buffer mode into
++ * the buffer buf
++ *
++ * @return The total number of bytes copied to the buffer or negative error code.
++ */
++static int cfi_ep_get_align_val(uint8_t * buf, struct dwc_otg_pcd *pcd,
++				struct cfi_usb_ctrlrequest *req)
++{
++	int retval = -DWC_E_INVALID;
++	uint8_t addr;
++	cfi_ep_t *ep;
++
++	/* The Low Byte of the wValue contains a non-zero address of the endpoint */
++	addr = req->wValue & 0xFF;
++	if (addr == 0)		/* The address should be non-zero */
++		return retval;
++
++	ep = get_cfi_ep_by_addr(pcd->cfi, addr);
++	if (NULL == ep) {
++		CFI_INFO("%s: Unable to get the endpoint address(0x%02x)\n",
++			 __func__, addr);
++		return retval;
++	}
++
++	dwc_memcpy(buf, ep->bm_align, BS_ALIGN_VAL_HDR_LEN);
++	retval = BS_ALIGN_VAL_HDR_LEN;
++
++	return retval;
++}
++
++/**
++ * This function sets a new value for the specified feature
++ *
++ * @param	pcd	A pointer to the PCD object
++ *
++ * @return 0 if successful, negative error code otherwise to stall the DCE.
++ */
++static int cfi_set_feature_value(struct dwc_otg_pcd *pcd)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	uint16_t wIndex, wValue;
++	uint8_t bRequest;
++	struct dwc_otg_core_if *coreif;
++	cfiobject_t *cfi = pcd->cfi;
++	struct cfi_usb_ctrlrequest *ctrl_req;
++	uint8_t *buf;
++	ctrl_req = &cfi->ctrl_req;
++
++	buf = pcd->cfi->ctrl_req.data;
++
++	coreif = GET_CORE_IF(pcd);
++	bRequest = ctrl_req->bRequest;
++	wIndex = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wIndex);
++	wValue = DWC_CONSTANT_CPU_TO_LE16(ctrl_req->wValue);
++
++	/* See which feature is to be modified */
++	switch (wIndex) {
++	case FT_ID_DMA_BUFFER_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_sg_val(buf, pcd)) < 0)
++			return retval;
++
++		/* And send this request to the gadget */
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_BUFF_ALIGN:
++		if ((retval = cfi_ep_set_alignment_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CONCAT_SETUP:
++		/* Modify the feature */
++		if ((retval = cfi_ep_set_concat_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 1;
++		break;
++
++	case FT_ID_DMA_CIRCULAR:
++		CFI_INFO("FT_ID_DMA_CIRCULAR\n");
++		break;
++
++	case FT_ID_THRESHOLD_SETUP:
++		CFI_INFO("FT_ID_THRESHOLD_SETUP\n");
++		break;
++
++	case FT_ID_DFIFO_DEPTH:
++		CFI_INFO("FT_ID_DFIFO_DEPTH\n");
++		break;
++
++	case FT_ID_TX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_TX_FIFO_DEPTH\n");
++		if ((retval = cfi_ep_set_tx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++
++	case FT_ID_RX_FIFO_DEPTH:
++		CFI_INFO("FT_ID_RX_FIFO_DEPTH\n");
++		if ((retval = cfi_set_rx_fifo_val(buf, pcd)) < 0)
++			return retval;
++		cfi->need_gadget_att = 0;
++		break;
++	}
++
++	return retval;
++}
++
++#endif //DWC_UTE_CFI
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cfi.h b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
+new file mode 100644
+index 0000000..55fd337
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cfi.h
+@@ -0,0 +1,320 @@
++/* ==========================================================================
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_OTG_CFI_H__)
++#define __DWC_OTG_CFI_H__
++
++#include "dwc_otg_pcd.h"
++#include "dwc_cfi_common.h"
++
++/**
++ * @file
++ * This file contains the CFI related OTG PCD specific common constants,
++ * interfaces(functions and macros) and data structures.The CFI Protocol is an
++ * optional interface for internal testing purposes that a DUT may implement to
++ * support testing of configurable features.
++ *
++ */
++
++struct dwc_otg_pcd;
++struct dwc_otg_pcd_ep;
++
++/** OTG CFI Features (properties) ID constants */
++/** This is a request for all Core Features */
++#define FT_ID_DMA_MODE					0x0001
++#define FT_ID_DMA_BUFFER_SETUP			0x0002
++#define FT_ID_DMA_BUFF_ALIGN			0x0003
++#define FT_ID_DMA_CONCAT_SETUP			0x0004
++#define FT_ID_DMA_CIRCULAR				0x0005
++#define FT_ID_THRESHOLD_SETUP			0x0006
++#define FT_ID_DFIFO_DEPTH				0x0007
++#define FT_ID_TX_FIFO_DEPTH				0x0008
++#define FT_ID_RX_FIFO_DEPTH				0x0009
++
++/**********************************************************/
++#define CFI_INFO_DEF
++
++#ifdef CFI_INFO_DEF
++#define CFI_INFO(fmt...)	DWC_PRINTF("CFI: " fmt);
++#else
++#define CFI_INFO(fmt...)
++#endif
++
++#define min(x,y) ({ \
++	x < y ? x : y; })
++
++#define max(x,y) ({ \
++	x > y ? x : y; })
++
++/**
++ * Descriptor DMA SG Buffer setup structure (SG buffer). This structure is
++ * also used for setting up a buffer for Circular DDMA.
++ */
++struct _ddma_sg_buffer_setup {
++#define BS_SG_VAL_DESC_LEN	6
++	/* The OUT EP address */
++	uint8_t bOutEndpointAddress;
++	/* The IN EP address */
++	uint8_t bInEndpointAddress;
++	/* Number of bytes to put between transfer segments (must be DWORD boundaries) */
++	uint8_t bOffset;
++	/* The number of transfer segments (a DMA descriptors per each segment) */
++	uint8_t bCount;
++	/* Size (in byte) of each transfer segment */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_sg_buffer_setup ddma_sg_buffer_setup_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup_hdr {
++#define BS_CONCAT_VAL_HDR_LEN	4
++	/* The endpoint for which the buffer is to be set up */
++	uint8_t bEndpointAddress;
++	/* The count of descriptors to be used */
++	uint8_t bDescCount;
++	/* The total size of the transfer */
++	uint16_t wSize;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup_hdr ddma_concat_buffer_setup_hdr_t;
++
++/** Descriptor DMA Concatenation Buffer setup structure */
++struct _ddma_concat_buffer_setup {
++	/* The SG header */
++	ddma_concat_buffer_setup_hdr_t hdr;
++
++	/* The XFER sizes pointer (allocated dynamically) */
++	uint16_t *wTxBytes;
++} __attribute__ ((packed));
++typedef struct _ddma_concat_buffer_setup ddma_concat_buffer_setup_t;
++
++/** Descriptor DMA Alignment Buffer setup structure */
++struct _ddma_align_buffer_setup {
++#define BS_ALIGN_VAL_HDR_LEN	2
++	uint8_t bEndpointAddress;
++	uint8_t bAlign;
++} __attribute__ ((packed));
++typedef struct _ddma_align_buffer_setup ddma_align_buffer_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _tx_fifo_size_setup {
++	uint8_t bEndpointAddress;
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _tx_fifo_size_setup tx_fifo_size_setup_t;
++
++/** Transmit FIFO Size setup structure */
++struct _rx_fifo_size_setup {
++	uint16_t wDepth;
++} __attribute__ ((packed));
++typedef struct _rx_fifo_size_setup rx_fifo_size_setup_t;
++
++/**
++ * struct cfi_usb_ctrlrequest - the CFI implementation of the struct usb_ctrlrequest
++ * This structure encapsulates the standard usb_ctrlrequest and adds a pointer
++ * to the data returned in the data stage of a 3-stage Control Write requests.
++ */
++struct cfi_usb_ctrlrequest {
++	uint8_t bRequestType;
++	uint8_t bRequest;
++	uint16_t wValue;
++	uint16_t wIndex;
++	uint16_t wLength;
++	uint8_t *data;
++} UPACKED;
++
++/*---------------------------------------------------------------------------*/
++
++/**
++ * The CFI wrapper of the enabled and activated dwc_otg_pcd_ep structures.
++ * This structure is used to store the buffer setup data for any
++ * enabled endpoint in the PCD.
++ */
++struct cfi_ep {
++	/* Entry for the list container */
++	dwc_list_link_t lh;
++	/* Pointer to the active PCD endpoint structure */
++	struct dwc_otg_pcd_ep *ep;
++	/* The last descriptor in the chain of DMA descriptors of the endpoint */
++	struct dwc_otg_dma_desc *dma_desc_last;
++	/* The SG feature value */
++	ddma_sg_buffer_setup_t *bm_sg;
++	/* The Circular feature value */
++	ddma_sg_buffer_setup_t *bm_circ;
++	/* The Concatenation feature value */
++	ddma_concat_buffer_setup_t *bm_concat;
++	/* The Alignment feature value */
++	ddma_align_buffer_setup_t *bm_align;
++	/* XFER length */
++	uint32_t xfer_len;
++	/*
++	 * Count of DMA descriptors currently used.
++	 * The total should not exceed the MAX_DMA_DESCS_PER_EP value
++	 * defined in the dwc_otg_cil.h
++	 */
++	uint32_t desc_count;
++};
++typedef struct cfi_ep cfi_ep_t;
++
++typedef struct cfi_dma_buff {
++#define CFI_IN_BUF_LEN	1024
++#define CFI_OUT_BUF_LEN	1024
++	dma_addr_t addr;
++	uint8_t *buf;
++} cfi_dma_buff_t;
++
++struct cfiobject;
++
++/**
++ * This is the interface for the CFI operations.
++ *
++ * @param	ep_enable			Called when any endpoint is enabled and activated.
++ * @param	release				Called when the CFI object is released and it needs to correctly
++ *								deallocate the dynamic memory
++ * @param	ctrl_write_complete	Called when the data stage of the request is complete
++ */
++typedef struct cfi_ops {
++	int (*ep_enable) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			  struct dwc_otg_pcd_ep * ep);
++	void *(*ep_alloc_buf) (struct cfiobject * cfi, struct dwc_otg_pcd * pcd,
++			       struct dwc_otg_pcd_ep * ep, dma_addr_t * dma,
++			       unsigned size, gfp_t flags);
++	void (*release) (struct cfiobject * cfi);
++	int (*ctrl_write_complete) (struct cfiobject * cfi,
++				    struct dwc_otg_pcd * pcd);
++	void (*build_descriptors) (struct cfiobject * cfi,
++				   struct dwc_otg_pcd * pcd,
++				   struct dwc_otg_pcd_ep * ep,
++				   dwc_otg_pcd_request_t * req);
++} cfi_ops_t;
++
++struct cfiobject {
++	cfi_ops_t ops;
++	struct dwc_otg_pcd *pcd;
++	struct usb_gadget *gadget;
++
++	/* Buffers used to send/receive CFI-related request data */
++	cfi_dma_buff_t buf_in;
++	cfi_dma_buff_t buf_out;
++
++	/* CFI specific Control request wrapper */
++	struct cfi_usb_ctrlrequest ctrl_req;
++
++	/* The list of active EP's in the PCD of type cfi_ep_t */
++	dwc_list_link_t active_eps;
++
++	/* This flag shall control the propagation of a specific request
++	 * to the gadget's processing routines.
++	 * 0 - no gadget handling
++	 * 1 - the gadget needs to know about this request (w/o completing a status
++	 * phase - just return a 0 to the _setup callback)
++	 */
++	uint8_t need_gadget_att;
++
++	/* Flag indicating whether the status IN phase needs to be
++	 * completed by the PCD
++	 */
++	uint8_t need_status_in_complete;
++};
++typedef struct cfiobject cfiobject_t;
++
++#define DUMP_MSG
++
++#if defined(DUMP_MSG)
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++
++	start = 0;
++	while (length > 0) {
++		num = min(length, 16u);
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_DEBUG("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function returns a pointer to cfi_ep_t object with the addr address.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_addr(struct cfiobject *cfi,
++						uint8_t addr)
++{
++	struct cfi_ep *pcfiep;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++
++		if (pcfiep->ep->desc->bEndpointAddress == addr) {
++			return pcfiep;
++		}
++	}
++
++	return NULL;
++}
++
++/**
++ * This function returns a pointer to cfi_ep_t object that matches
++ * the dwc_otg_pcd_ep object.
++ */
++static inline struct cfi_ep *get_cfi_ep_by_pcd_ep(struct cfiobject *cfi,
++						  struct dwc_otg_pcd_ep *ep)
++{
++	struct cfi_ep *pcfiep = NULL;
++	dwc_list_link_t *tmp;
++
++	DWC_LIST_FOREACH(tmp, &cfi->active_eps) {
++		pcfiep = DWC_LIST_ENTRY(tmp, struct cfi_ep, lh);
++		if (pcfiep->ep == ep) {
++			return pcfiep;
++		}
++	}
++	return NULL;
++}
++
++int cfi_setup(struct dwc_otg_pcd *pcd, struct cfi_usb_ctrlrequest *ctrl);
++
++#endif /* (__DWC_OTG_CFI_H__) */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil.c b/drivers/usb/host/dwc_otg/dwc_otg_cil.c
+new file mode 100644
+index 0000000..6a32c5c
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.c
+@@ -0,0 +1,7151 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.c $
++ * $Revision: #191 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * The CIL manages the memory map for the core so that the HCD and PCD
++ * don't have to do this separately. It also handles basic tasks like
++ * reading/writing the registers and data FIFOs in the controller.
++ * Some of the data access functions provide encapsulation of several
++ * operations required to perform a task, such as writing multiple
++ * registers to start a transfer. Finally, the CIL performs basic
++ * services that are not specific to either the host or device modes
++ * of operation. These services include management of the OTG Host
++ * Negotiation Protocol (HNP) and Session Request Protocol (SRP). A
++ * Diagnostic API is also provided to allow testing of the controller
++ * hardware.
++ *
++ * The Core Interface Layer has the following requirements:
++ * - Provides basic controller operations.
++ * - Minimal use of OS services.
++ * - The OS services used will be abstracted by using inline functions
++ *	 or macros.
++ *
++ */
++
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if);
++
++/**
++ * This function is called to initialize the DWC_otg CSR data
++ * structures. The register addresses in the device and host
++ * structures are initialized from the base address supplied by the
++ * caller. The calling function must make the OS calls to get the
++ * base address of the DWC_otg controller registers. The core_params
++ * argument holds the parameters that specify how the core should be
++ * configured.
++ *
++ * @param reg_base_addr Base address of DWC_otg core registers
++ *
++ */
++dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * reg_base_addr)
++{
++	dwc_otg_core_if_t *core_if = 0;
++	dwc_otg_dev_if_t *dev_if = 0;
++	dwc_otg_host_if_t *host_if = 0;
++	uint8_t *reg_base = (uint8_t *) reg_base_addr;
++	int i = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, reg_base_addr);
++
++	core_if = DWC_ALLOC(sizeof(dwc_otg_core_if_t));
++
++	if (core_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_core_if_t failed\n");
++		return 0;
++	}
++	core_if->core_global_regs = (dwc_otg_core_global_regs_t *) reg_base;
++
++	/*
++	 * Allocate the Device Mode structures.
++	 */
++	dev_if = DWC_ALLOC(sizeof(dwc_otg_dev_if_t));
++
++	if (dev_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL, "Allocation of dwc_otg_dev_if_t failed\n");
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	dev_if->dev_global_regs =
++	    (dwc_otg_device_global_regs_t *) (reg_base +
++					      DWC_DEV_GLOBAL_REG_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dev_if->in_ep_regs[i] = (dwc_otg_dev_in_ep_regs_t *)
++		    (reg_base + DWC_DEV_IN_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++
++		dev_if->out_ep_regs[i] = (dwc_otg_dev_out_ep_regs_t *)
++		    (reg_base + DWC_DEV_OUT_EP_REG_OFFSET +
++		     (i * DWC_EP_REG_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "in_ep_regs[%d]->diepctl=%p\n",
++			    i, &dev_if->in_ep_regs[i]->diepctl);
++		DWC_DEBUGPL(DBG_CILV, "out_ep_regs[%d]->doepctl=%p\n",
++			    i, &dev_if->out_ep_regs[i]->doepctl);
++	}
++
++	dev_if->speed = 0;	// unknown
++
++	core_if->dev_if = dev_if;
++
++	/*
++	 * Allocate the Host Mode structures.
++	 */
++	host_if = DWC_ALLOC(sizeof(dwc_otg_host_if_t));
++
++	if (host_if == NULL) {
++		DWC_DEBUGPL(DBG_CIL,
++			    "Allocation of dwc_otg_host_if_t failed\n");
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	host_if->host_global_regs = (dwc_otg_host_global_regs_t *)
++	    (reg_base + DWC_OTG_HOST_GLOBAL_REG_OFFSET);
++
++	host_if->hprt0 =
++	    (uint32_t *) (reg_base + DWC_OTG_HOST_PORT_REGS_OFFSET);
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		host_if->hc_regs[i] = (dwc_otg_hc_regs_t *)
++		    (reg_base + DWC_OTG_HOST_CHAN_REGS_OFFSET +
++		     (i * DWC_OTG_CHAN_REGS_OFFSET));
++		DWC_DEBUGPL(DBG_CILV, "hc_reg[%d]->hcchar=%p\n",
++			    i, &host_if->hc_regs[i]->hcchar);
++	}
++
++	host_if->num_host_channels = MAX_EPS_CHANNELS;
++	core_if->host_if = host_if;
++
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		core_if->data_fifo[i] =
++		    (uint32_t *) (reg_base + DWC_OTG_DATA_FIFO_OFFSET +
++				  (i * DWC_OTG_DATA_FIFO_SIZE));
++		DWC_DEBUGPL(DBG_CILV, "data_fifo[%d]=0x%08lx\n",
++			    i, (unsigned long)core_if->data_fifo[i]);
++	}
++
++	core_if->pcgcctl = (uint32_t *) (reg_base + DWC_OTG_PCGCCTL_OFFSET);
++
++	/* Initiate lx_state to L3 disconnected state */
++	core_if->lx_state = DWC_OTG_L3;
++	/*
++	 * Store the contents of the hardware configuration registers here for
++	 * easy access later.
++	 */
++	core_if->hwcfg1.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg1);
++	core_if->hwcfg2.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	core_if->hwcfg3.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg3);
++	core_if->hwcfg4.d32 =
++	    DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	/* Force host mode to get HPTXFSIZ exact power on value */
++	{
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100);
++		core_if->hptxfsiz.d32 =
++		DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++		gusbcfg.d32 =  DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++		gusbcfg.b.force_host_mode = 0;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++		dwc_mdelay(100);
++	}
++
++	DWC_DEBUGPL(DBG_CILV, "hwcfg1=%08x\n", core_if->hwcfg1.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg2=%08x\n", core_if->hwcfg2.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg3=%08x\n", core_if->hwcfg3.d32);
++	DWC_DEBUGPL(DBG_CILV, "hwcfg4=%08x\n", core_if->hwcfg4.d32);
++
++	core_if->hcfg.d32 =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	core_if->dcfg.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++
++	DWC_DEBUGPL(DBG_CILV, "hcfg=%08x\n", core_if->hcfg.d32);
++	DWC_DEBUGPL(DBG_CILV, "dcfg=%08x\n", core_if->dcfg.d32);
++
++	DWC_DEBUGPL(DBG_CILV, "op_mode=%0x\n", core_if->hwcfg2.b.op_mode);
++	DWC_DEBUGPL(DBG_CILV, "arch=%0x\n", core_if->hwcfg2.b.architecture);
++	DWC_DEBUGPL(DBG_CILV, "num_dev_ep=%d\n", core_if->hwcfg2.b.num_dev_ep);
++	DWC_DEBUGPL(DBG_CILV, "num_host_chan=%d\n",
++		    core_if->hwcfg2.b.num_host_chan);
++	DWC_DEBUGPL(DBG_CILV, "nonperio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.nonperio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "host_perio_tx_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.host_perio_tx_q_depth);
++	DWC_DEBUGPL(DBG_CILV, "dev_token_q_depth=0x%0x\n",
++		    core_if->hwcfg2.b.dev_token_q_depth);
++
++	DWC_DEBUGPL(DBG_CILV, "Total FIFO SZ=%d\n",
++		    core_if->hwcfg3.b.dfifo_depth);
++	DWC_DEBUGPL(DBG_CILV, "xfer_size_cntr_width=%0x\n",
++		    core_if->hwcfg3.b.xfer_size_cntr_width);
++
++	/*
++	 * Set the SRP sucess bit for FS-I2c
++	 */
++	core_if->srp_success = 0;
++	core_if->srp_timer_started = 0;
++
++	/*
++	 * Create new workqueue and init works
++	 */
++	core_if->wq_otg = DWC_WORKQ_ALLOC("dwc_otg");
++	if (core_if->wq_otg == 0) {
++		DWC_WARN("DWC_WORKQ_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	core_if->snpsid = DWC_READ_REG32(&core_if->core_global_regs->gsnpsid);
++
++	DWC_PRINTF("Core Release: %x.%x%x%x\n",
++		   (core_if->snpsid >> 12 & 0xF),
++		   (core_if->snpsid >> 8 & 0xF),
++		   (core_if->snpsid >> 4 & 0xF), (core_if->snpsid & 0xF));
++
++	core_if->wkp_timer = DWC_TIMER_ALLOC("Wake Up Timer",
++					     w_wakeup_detected, core_if);
++	if (core_if->wkp_timer == 0) {
++		DWC_WARN("DWC_TIMER_ALLOC failed\n");
++		DWC_FREE(host_if);
++		DWC_FREE(dev_if);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++		DWC_FREE(core_if);
++		return 0;
++	}
++
++	if (dwc_otg_setup_params(core_if)) {
++		DWC_WARN("Error while setting core params\n");
++	}
++
++	core_if->hibernation_suspend = 0;
++
++	/** ADP initialization */
++	dwc_otg_adp_init(core_if);
++
++	return core_if;
++}
++
++/**
++ * This function frees the structures allocated by dwc_otg_cil_init().
++ *
++ * @param core_if The core interface pointer returned from
++ * 		  dwc_otg_cil_init().
++ *
++ */
++void dwc_otg_cil_remove(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 1, 0);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0);
++
++	dctl.b.sftdiscon = 1;
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0,
++				 dctl.d32);
++	}
++
++	if (core_if->wq_otg) {
++		DWC_WORKQ_WAIT_WORK_DONE(core_if->wq_otg, 500);
++		DWC_WORKQ_FREE(core_if->wq_otg);
++	}
++	if (core_if->dev_if) {
++		DWC_FREE(core_if->dev_if);
++	}
++	if (core_if->host_if) {
++		DWC_FREE(core_if->host_if);
++	}
++
++	/** Remove ADP Stuff  */
++	dwc_otg_adp_remove(core_if);
++	if (core_if->core_params) {
++		DWC_FREE(core_if->core_params);
++	}
++	if (core_if->wkp_timer) {
++		DWC_TIMER_FREE(core_if->wkp_timer);
++	}
++	if (core_if->srp_timer) {
++		DWC_TIMER_FREE(core_if->srp_timer);
++	}
++	DWC_FREE(core_if);
++}
++
++/**
++ * This function enables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Enable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, 0, ahbcfg.d32);
++}
++
++/**
++ * This function disables the controller's Global Interrupt in the AHB Config
++ * register.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	ahbcfg.b.glblintrmsk = 1;	/* Disable interrupts */
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gahbcfg, ahbcfg.d32, 0);
++}
++
++/**
++ * This function initializes the commmon interrupts, used in both
++ * device and host modes.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++static void dwc_otg_enable_common_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	/* Clear any pending OTG Interrupts */
++	DWC_WRITE_REG32(&global_regs->gotgint, 0xFFFFFFFF);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/*
++	 * Enable the interrupts in the GINTMSK.
++	 */
++	intr_mask.b.modemismatch = 1;
++	intr_mask.b.otgintr = 1;
++
++	if (!core_if->dma_enable) {
++		intr_mask.b.rxstsqlvl = 1;
++	}
++
++	intr_mask.b.conidstschng = 1;
++	intr_mask.b.wkupintr = 1;
++	intr_mask.b.disconnect = 0;
++	intr_mask.b.usbsuspend = 1;
++	intr_mask.b.sessreqintr = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		intr_mask.b.lpmtranrcvd = 1;
++	}
++#endif
++	DWC_WRITE_REG32(&global_regs->gintmsk, intr_mask.d32);
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Device mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++				       int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (rem_wakeup) {
++		dwc_udelay(70);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Mask interrupts from gpwrdn */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/*
++	 * Set Restore Essential Regs bit in PCGCCTL register, restore_mode = 1
++	 * indicates restore from remote_wakeup
++	 */
++	restore_essential_regs(core_if, rem_wakeup, 0);
++
++	/*
++	 * Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling
++	 */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/*
++		 * Wait For Restore_done Interrupt. This mechanism of polling the
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Restore Done Interrupt seen\n");
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_PRINTF("Restore Done interrupt wasn't generated here\n");
++		}
++	}
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		pcgcctl.d32 = 0;
++		pcgcctl.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	}
++
++	/* Restore GUSBCFG and DCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (!rem_wakeup) {
++		/* Set Device programming done bit */
++		dctl.b.pwronprgdone = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	} else {
++		/* Start Remote Wakeup Signaling */
++		dctl.d32 = core_if->dr_backup->dctl;
++		dctl.b.rmtwkupsig = 1;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++
++	dwc_mdelay(2);
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore device global registers */
++	dwc_otg_restore_dev_regs(core_if, rem_wakeup);
++
++	if (rem_wakeup) {
++		dwc_mdelay(7);
++		dctl.d32 = 0;
++		dctl.b.rmtwkupsig = 1;
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++	}
++
++	core_if->hibernation_suspend = 0;
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery completes here\n");
++
++	return 1;
++}
++
++/*
++ * The restore operation is modified to support Synopsys Emulated Powerdown and
++ * Hibernation. This function is for exiting from Host mode hibernation by
++ * Host Initiated Resume/Reset and Device Initiated Remote-Wakeup.
++ * @param core_if Programming view of DWC_otg controller.
++ * @param rem_wakeup - indicates whether resume is initiated by Device or Host.
++ * @param reset - indicates whether resume is initiated by Reset.
++ */
++int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++				     int rem_wakeup, int reset)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	int timeout = 2000;
++
++	DWC_DEBUGPL(DBG_HCD, "%s called\n", __FUNCTION__);
++	/* Switch-on voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Assert Restore signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	if (!rem_wakeup) {
++		dwc_udelay(50);
++	}
++
++	/* Deassert Reset core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	gpwrdn.d32 = 0;
++	gpwrdn.b.connect_det_msk = 1;
++	gpwrdn.b.srp_det_msk = 1;
++	gpwrdn.b.disconn_det_msk = 1;
++	gpwrdn.b.rst_det_msk = 1;
++	gpwrdn.b.lnstchng_msk = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are going out from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Set Restore Essential Regs bit in PCGCCTL register */
++	restore_essential_regs(core_if, rem_wakeup, 1);
++
++	/* Wait a little for seeing new value of variable hibernation_suspend if
++	 * Restore done interrupt received before polling */
++	dwc_udelay(10);
++
++	if (core_if->hibernation_suspend == 0) {
++		/* Wait For Restore_done Interrupt. This mechanism of polling the
++		 * interrupt is introduced to avoid any possible race conditions
++		 */
++		do {
++			gintsts_data_t gintsts;
++			gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			if (gintsts.b.restoredone) {
++				gintsts.d32 = 0;
++				gintsts.b.restoredone = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++				DWC_DEBUGPL(DBG_HCD,"Restore Done Interrupt seen\n");
++				break;
++			}
++			dwc_udelay(10);
++		} while (--timeout);
++		if (!timeout) {
++			DWC_WARN("Restore Done interrupt wasn't generated\n");
++		}
++	}
++
++	/* Set the flag's value to 0 again after receiving restore done interrupt */
++	core_if->hibernation_suspend = 0;
++
++	/* This step is not described in functional spec but if not wait for this
++	 * delay, mismatch interrupts occurred because just after restore core is
++	 * in Device mode(gintsts.curmode == 0) */
++	dwc_mdelay(100);
++
++	/* Clear all pending interrupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* De-assert Restore */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.restore = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Restore GUSBCFG and HCFG */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++			core_if->hr_backup->hcfg_local);
++
++	/* De-assert Wakeup Logic */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Start the Resume operation by programming HPRT0 */
++	hprt0.d32 = core_if->hr_backup->hprt0_local;
++	hprt0.b.prtpwr = 1;
++	hprt0.b.prtena = 0;
++	hprt0.b.prtsusp = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	DWC_PRINTF("Resume Starts Now\n");
++	if (!reset) {		// Indicates it is Resume Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtres = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		if (!rem_wakeup)
++			hprt0.b.prtres = 0;
++		/* Wait for Resume time and then program HPRT again */
++		dwc_mdelay(100);
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	} else {		// Indicates it is Reset Operation
++		hprt0.d32 = core_if->hr_backup->hprt0_local;
++		hprt0.b.prtrst = 1;
++		hprt0.b.prtpwr = 1;
++		hprt0.b.prtena = 0;
++		hprt0.b.prtsusp = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++		/* Wait for Reset time and then program HPRT again */
++		dwc_mdelay(60);
++		hprt0.b.prtrst = 0;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	/* Clear all interrupt status */
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtconndet = 1;
++	hprt0.b.prtenchng = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Restore global registers */
++	dwc_otg_restore_global_regs(core_if);
++	/* Restore host global registers */
++	dwc_otg_restore_host_regs(core_if, reset);
++
++	/* The core will be in ON STATE */
++	core_if->lx_state = DWC_OTG_L0;
++	DWC_PRINTF("Hibernation recovery is complete here\n");
++	return 0;
++}
++
++/** Saves some register values into system memory. */
++int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gotgctl_local = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gr->gahbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++	gr->gusbcfg_local = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	gr->grxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++	gr->gnptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++	gr->hptxfsiz_local = DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gr->glpmcfg_local = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++#endif
++	gr->gi2cctl_local = DWC_READ_REG32(&core_if->core_global_regs->gi2cctl);
++	gr->pcgcctl_local = DWC_READ_REG32(core_if->pcgcctl);
++	gr->gdfifocfg_local =
++	    DWC_READ_REG32(&core_if->core_global_regs->gdfifocfg);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		gr->dtxfsiz_local[i] =
++		    DWC_READ_REG32(&(core_if->core_global_regs->dtxfsiz[i]));
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "===========Backing Global registers==========\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gotgctl   = %08x\n", gr->gotgctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gahbcfg   = %08x\n", gr->gahbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gusbcfg   = %08x\n", gr->gusbcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up grxfsiz   = %08x\n", gr->grxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up gnptxfsiz = %08x\n",
++		    gr->gnptxfsiz_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hptxfsiz  = %08x\n",
++		    gr->hptxfsiz_local);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_DEBUGPL(DBG_ANY, "Backed up glpmcfg   = %08x\n", gr->glpmcfg_local);
++#endif
++	DWC_DEBUGPL(DBG_ANY, "Backed up gi2cctl   = %08x\n", gr->gi2cctl_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up pcgcctl   = %08x\n", gr->pcgcctl_local);
++	DWC_DEBUGPL(DBG_ANY,"Backed up gdfifocfg   = %08x\n",gr->gdfifocfg_local);
++
++	return 0;
++}
++
++/** Saves GINTMSK register before setting the msk bits. */
++int dwc_otg_save_gintmsk_reg(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		gr = DWC_ALLOC(sizeof(*gr));
++		if (!gr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->gr_backup = gr;
++	}
++
++	gr->gintmsk_local = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	DWC_DEBUGPL(DBG_ANY,"=============Backing GINTMSK registers============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up gintmsk   = %08x\n", gr->gintmsk_local);
++
++	return 0;
++}
++
++int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++	if (!dr) {
++		dr = DWC_ALLOC(sizeof(*dr));
++		if (!dr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->dr_backup = dr;
++	}
++
++	dr->dcfg = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dr->dctl = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	dr->daintmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	dr->diepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->diepmsk);
++	dr->doepmsk =
++	    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		dr->diepctl[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++		dr->dieptsiz[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz);
++		dr->diepdma[i] =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma);
++	}
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers==============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up dcfg            = %08x\n", dr->dcfg);
++	DWC_DEBUGPL(DBG_ANY, "Backed up dctl        = %08x\n", dr->dctl);
++	DWC_DEBUGPL(DBG_ANY, "Backed up daintmsk            = %08x\n",
++		    dr->daintmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up diepmsk        = %08x\n", dr->diepmsk);
++	DWC_DEBUGPL(DBG_ANY, "Backed up doepmsk        = %08x\n", dr->doepmsk);
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepctl[%d]        = %08x\n", i,
++			    dr->diepctl[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up dieptsiz[%d]        = %08x\n",
++			    i, dr->dieptsiz[i]);
++		DWC_DEBUGPL(DBG_ANY, "Backed up diepdma[%d]        = %08x\n", i,
++			    dr->diepdma[i]);
++	}
++
++	return 0;
++}
++
++int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++
++	hr = core_if->hr_backup;
++	if (!hr) {
++		hr = DWC_ALLOC(sizeof(*hr));
++		if (!hr) {
++			return -DWC_E_NO_MEMORY;
++		}
++		core_if->hr_backup = hr;
++	}
++
++	hr->hcfg_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hr->haintmsk_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->haintmsk);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		hr->hcintmsk_local[i] =
++		    DWC_READ_REG32(&core_if->host_if->hc_regs[i]->hcintmsk);
++	}
++	hr->hprt0_local = DWC_READ_REG32(core_if->host_if->hprt0);
++	hr->hfir_local =
++	    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "=============Backing Host registers===============\n");
++	DWC_DEBUGPL(DBG_ANY, "Backed up hcfg		= %08x\n",
++		    hr->hcfg_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up haintmsk = %08x\n", hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_DEBUGPL(DBG_ANY, "Backed up hcintmsk[%02d]=%08x\n", i,
++			    hr->hcintmsk_local[i]);
++	}
++	DWC_DEBUGPL(DBG_ANY, "Backed up hprt0           = %08x\n",
++		    hr->hprt0_local);
++	DWC_DEBUGPL(DBG_ANY, "Backed up hfir           = %08x\n",
++		    hr->hfir_local);
++
++	return 0;
++}
++
++int dwc_otg_restore_global_regs(dwc_otg_core_if_t *core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	int i;
++
++	gr = core_if->gr_backup;
++	if (!gr) {
++		return -DWC_E_INVALID;
++	}
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, gr->gotgctl_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gr->gintmsk_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gr->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gr->gahbcfg_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, gr->grxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz,
++			gr->gnptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->hptxfsiz,
++			gr->hptxfsiz_local);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gdfifocfg,
++			gr->gdfifocfg_local);
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		DWC_WRITE_REG32(&core_if->core_global_regs->dtxfsiz[i],
++				gr->dtxfsiz_local[i]);
++	}
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(core_if->host_if->hprt0, 0x0000100A);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg,
++			(gr->gahbcfg_local));
++	return 0;
++}
++
++int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if, int rem_wakeup)
++{
++	struct dwc_otg_dev_regs_backup *dr;
++	int i;
++
++	dr = core_if->dr_backup;
++
++	if (!dr) {
++		return -DWC_E_INVALID;
++	}
++
++	if (!rem_wakeup) {
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				dr->dctl);
++	}
++
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->daintmsk, dr->daintmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->diepmsk, dr->diepmsk);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->doepmsk, dr->doepmsk);
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->dieptsiz, dr->dieptsiz[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepdma, dr->diepdma[i]);
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl, dr->diepctl[i]);
++	}
++
++	return 0;
++}
++
++int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset)
++{
++	struct dwc_otg_host_regs_backup *hr;
++	int i;
++	hr = core_if->hr_backup;
++
++	if (!hr) {
++		return -DWC_E_INVALID;
++	}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hr->hcfg_local);
++	//if (!reset)
++	//{
++	//      DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hr->hfir_local);
++	//}
++
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->haintmsk,
++			hr->haintmsk_local);
++	for (i = 0; i < dwc_otg_get_param_host_channels(core_if); ++i) {
++		DWC_WRITE_REG32(&core_if->host_if->hc_regs[i]->hcintmsk,
++				hr->hcintmsk_local[i]);
++	}
++
++	return 0;
++}
++
++int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if)
++{
++	struct dwc_otg_global_regs_backup *gr;
++
++	gr = core_if->gr_backup;
++
++	/* Restore values for LPM and I2C */
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, gr->glpmcfg_local);
++#endif
++	DWC_WRITE_REG32(&core_if->core_global_regs->gi2cctl, gr->gi2cctl_local);
++
++	return 0;
++}
++
++int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode, int is_host)
++{
++	struct dwc_otg_global_regs_backup *gr;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gusbcfg_data_t gusbcfg = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	/* Restore LPM and I2C registers */
++	restore_lpm_i2c_regs(core_if);
++
++	/* Set PCGCCTL to 0 */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0x00000000);
++
++	gr = core_if->gr_backup;
++	/* Load restore values for [31:14] bits */
++	DWC_WRITE_REG32(core_if->pcgcctl,
++			((gr->pcgcctl_local & 0xffffc000) | 0x00020000));
++
++	/* Umnask global Interrupt in GAHBCFG and restore it */
++	gahbcfg.d32 = gr->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	/* Clear all pending interupts */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Unmask restore done interrupt */
++	gintmsk.b.restoredone = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32);
++
++	/* Restore GUSBCFG and HCFG/DCFG */
++	gusbcfg.d32 = core_if->gr_backup->gusbcfg_local;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, gusbcfg.d32);
++
++	if (is_host) {
++		hcfg_data_t hcfg = {.d32 = 0 };
++		hcfg.d32 = core_if->hr_backup->hcfg_local;
++		DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg,
++				hcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits and set EssRegRestored bit */
++		pcgcctl.d32 = gr->pcgcctl_local | 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (rmode)
++			pcgcctl.b.restoremode = 1;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	} else {
++		dcfg_data_t dcfg = {.d32 = 0 };
++		dcfg.d32 = core_if->dr_backup->dcfg;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		if (!rmode) {
++			pcgcctl.d32 |= 0x208;
++		}
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++		dwc_udelay(10);
++
++		/* Load restore values for [31:14] bits */
++		pcgcctl.d32 = gr->pcgcctl_local & 0xffffc000;
++		pcgcctl.d32 = gr->pcgcctl_local | 0x00020000;
++		pcgcctl.b.ess_reg_restored = 1;
++		if (!rmode)
++			pcgcctl.d32 |= 0x208;
++		DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	}
++
++	return 0;
++}
++
++/**
++ * Initializes the FSLSPClkSel field of the HCFG register depending on the PHY
++ * type.
++ */
++static void init_fslspclksel(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	hcfg_data_t hcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = DWC_HCFG_48_MHZ;
++	} else {
++		/* High speed PHY running at full speed or high speed */
++		val = DWC_HCFG_30_60_MHZ;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing HCFG.FSLSPClkSel to 0x%1x\n", val);
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.fslspclksel = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/**
++ * Initializes the DevSpd field of the DCFG register depending on the PHY type
++ * and the enumeration speed of the device.
++ */
++static void init_devspd(dwc_otg_core_if_t * core_if)
++{
++	uint32_t val;
++	dcfg_data_t dcfg;
++
++	if (((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls)) ||
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* Full speed PHY */
++		val = 0x3;
++	} else if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		/* High speed PHY running at full speed */
++		val = 0x1;
++	} else {
++		/* High speed PHY running at high speed */
++		val = 0x0;
++	}
++
++	DWC_DEBUGPL(DBG_CIL, "Initializing DCFG.DevSpd to 0x%1x\n", val);
++
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++/**
++ * This function calculates the number of IN EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_in_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_in_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 3;
++	uint32_t num_tx_fifos = core_if->hwcfg4.b.num_in_eps;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_in_eps++;
++
++		hwcfg1 >>= 2;
++	}
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		num_in_eps =
++		    (num_in_eps > num_tx_fifos) ? num_tx_fifos : num_in_eps;
++	}
++
++	return num_in_eps;
++}
++
++/**
++ * This function calculates the number of OUT EPS
++ * using GHWCFG1 and GHWCFG2 registers values
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ */
++static uint32_t calc_num_out_eps(dwc_otg_core_if_t * core_if)
++{
++	uint32_t num_out_eps = 0;
++	uint32_t num_eps = core_if->hwcfg2.b.num_dev_ep;
++	uint32_t hwcfg1 = core_if->hwcfg1.d32 >> 2;
++	int i;
++
++	for (i = 0; i < num_eps; ++i) {
++		if (!(hwcfg1 & 0x1))
++			num_out_eps++;
++
++		hwcfg1 >>= 2;
++	}
++	return num_out_eps;
++}
++
++/**
++ * This function initializes the DWC_otg controller registers and
++ * prepares the core for device mode or host mode operation.
++ *
++ * @param core_if Programming view of the DWC_otg controller
++ *
++ */
++void dwc_otg_core_init(dwc_otg_core_if_t * core_if)
++{
++	int i = 0;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	gahbcfg_data_t ahbcfg = {.d32 = 0 };
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++	gi2cctl_data_t i2cctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "dwc_otg_core_init(%p) regs at %p\n",
++                    core_if, global_regs);
++
++	/* Common Initialization */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	/* Program the ULPI External VBUS bit if needed */
++	usbcfg.b.ulpi_ext_vbus_drv =
++	    (core_if->core_params->phy_ulpi_ext_vbus ==
++	     DWC_PHY_ULPI_EXTERNAL_VBUS) ? 1 : 0;
++
++	/* Set external TS Dline pulsing */
++	usbcfg.b.term_sel_dl_pulse =
++	    (core_if->core_params->ts_dline == 1) ? 1 : 0;
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++	/* Reset the Controller */
++	dwc_otg_core_reset(core_if);
++
++	core_if->adp_enable = core_if->core_params->adp_supp_enable;
++	core_if->power_down = core_if->core_params->power_down;
++	core_if->otg_sts = 0;
++
++	/* Initialize parameters from Hardware configuration registers. */
++	dev_if->num_in_eps = calc_num_in_eps(core_if);
++	dev_if->num_out_eps = calc_num_out_eps(core_if);
++
++	DWC_DEBUGPL(DBG_CIL, "num_dev_perio_in_ep=%d\n",
++		    core_if->hwcfg4.b.num_dev_perio_in_ep);
++
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++		dev_if->perio_tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Periodic Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->perio_tx_fifo_size[i]);
++	}
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++		dev_if->tx_fifo_size[i] =
++		    DWC_READ_REG32(&global_regs->dtxfsiz[i]) >> 16;
++		DWC_DEBUGPL(DBG_CIL, "Tx FIFO SZ #%d=0x%0x\n",
++			    i, dev_if->tx_fifo_size[i]);
++	}
++
++	core_if->total_fifo_size = core_if->hwcfg3.b.dfifo_depth;
++	core_if->rx_fifo_size = DWC_READ_REG32(&global_regs->grxfsiz);
++	core_if->nperio_tx_fifo_size =
++	    DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16;
++
++	DWC_DEBUGPL(DBG_CIL, "Total FIFO SZ=%d\n", core_if->total_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "Rx FIFO SZ=%d\n", core_if->rx_fifo_size);
++	DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO SZ=%d\n",
++		    core_if->nperio_tx_fifo_size);
++
++	/* This programming sequence needs to happen in FS mode before any other
++	 * programming occurs */
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) &&
++	    (core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS)) {
++		/* If FS mode with FS PHY */
++
++		/* core_init() is now called on every switch so only call the
++		 * following for the first time through. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY detected\n");
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.physel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Reset after a PHY select */
++			dwc_otg_core_reset(core_if);
++		}
++
++		/* Program DCFG.DevSpd or HCFG.FSLSPclkSel to 48Mhz in FS.      Also
++		 * do this on HNP Dev/Host mode switches (done in dev_init and
++		 * host_init). */
++		if (dwc_otg_is_host_mode(core_if)) {
++			init_fslspclksel(core_if);
++		} else {
++			init_devspd(core_if);
++		}
++
++		if (core_if->core_params->i2c_enable) {
++			DWC_DEBUGPL(DBG_CIL, "FS_PHY Enabling I2c\n");
++			/* Program GUSBCFG.OtgUtmifsSel to I2C */
++			usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++			usbcfg.b.otgutmifssel = 1;
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++			/* Program GI2CCTL.I2CEn */
++			i2cctl.d32 = DWC_READ_REG32(&global_regs->gi2cctl);
++			i2cctl.b.i2cdevaddr = 1;
++			i2cctl.b.i2cen = 0;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++			i2cctl.b.i2cen = 1;
++			DWC_WRITE_REG32(&global_regs->gi2cctl, i2cctl.d32);
++		}
++
++	} /* endif speed == DWC_SPEED_PARAM_FULL */
++	else {
++		/* High speed PHY. */
++		if (!core_if->phy_init_done) {
++			core_if->phy_init_done = 1;
++			/* HS PHY parameters.  These parameters are preserved
++			 * during soft reset so only program the first time.  Do
++			 * a soft reset immediately after setting phyif.  */
++
++			if (core_if->core_params->phy_type == 2) {
++				/* ULPI interface */
++				usbcfg.b.ulpi_utmi_sel = 1;
++				usbcfg.b.phyif = 0;
++				usbcfg.b.ddrsel =
++				    core_if->core_params->phy_ulpi_ddr;
++			} else if (core_if->core_params->phy_type == 1) {
++				/* UTMI+ interface */
++				usbcfg.b.ulpi_utmi_sel = 0;
++				if (core_if->core_params->phy_utmi_width == 16) {
++					usbcfg.b.phyif = 1;
++
++				} else {
++					usbcfg.b.phyif = 0;
++				}
++			} else {
++				DWC_ERROR("FS PHY TYPE\n");
++			}
++			DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++			/* Reset after setting the PHY parameters */
++			dwc_otg_core_reset(core_if);
++		}
++	}
++
++	if ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	    (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	    (core_if->core_params->ulpi_fs_ls)) {
++		DWC_DEBUGPL(DBG_CIL, "Setting ULPI FSLS\n");
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 1;
++		usbcfg.b.ulpi_clk_sus_m = 1;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	} else {
++		usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++		usbcfg.b.ulpi_fsls = 0;
++		usbcfg.b.ulpi_clk_sus_m = 0;
++		DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++	}
++
++	/* Program the GAHBCFG Register. */
++	switch (core_if->hwcfg2.b.architecture) {
++
++	case DWC_SLAVE_ONLY_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Slave Only Mode\n");
++		ahbcfg.b.nptxfemplvl_txfemplvl =
++		    DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		ahbcfg.b.ptxfemplvl = DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY;
++		core_if->dma_enable = 0;
++		core_if->dma_desc_enable = 0;
++		break;
++
++	case DWC_EXT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "External DMA Mode\n");
++		{
++			uint8_t brst_sz = core_if->core_params->dma_burst_size;
++			ahbcfg.b.hburstlen = 0;
++			while (brst_sz > 1) {
++				ahbcfg.b.hburstlen++;
++				brst_sz >>= 1;
++			}
++		}
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	case DWC_INT_DMA_ARCH:
++		DWC_DEBUGPL(DBG_CIL, "Internal DMA Mode\n");
++		/* Old value was DWC_GAHBCFG_INT_DMA_BURST_INCR - done for
++		  Host mode ISOC in issue fix - vahrama */
++		/* Broadcom had altered to (1<<3)|(0<<0) - WRESP=1, max 4 beats */
++		ahbcfg.b.hburstlen = (1<<3)|(0<<0);//DWC_GAHBCFG_INT_DMA_BURST_INCR4;
++		core_if->dma_enable = (core_if->core_params->dma_enable != 0);
++		core_if->dma_desc_enable =
++		    (core_if->core_params->dma_desc_enable != 0);
++		break;
++
++	}
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			DWC_PRINTF("Using Descriptor DMA mode\n");
++		} else {
++			DWC_PRINTF("Using Buffer DMA mode\n");
++
++		}
++	} else {
++		DWC_PRINTF("Using Slave mode\n");
++		core_if->dma_desc_enable = 0;
++	}
++
++	if (core_if->core_params->ahb_single) {
++		ahbcfg.b.ahbsingle = 1;
++	}
++
++	ahbcfg.b.dmaenable = core_if->dma_enable;
++	DWC_WRITE_REG32(&global_regs->gahbcfg, ahbcfg.d32);
++
++	core_if->en_multiple_tx_fifo = core_if->hwcfg4.b.ded_fifo_en;
++
++	core_if->pti_enh_enable = core_if->core_params->pti_enable != 0;
++	core_if->multiproc_int_enable = core_if->core_params->mpi_enable;
++	DWC_PRINTF("Periodic Transfer Interrupt Enhancement - %s\n",
++		   ((core_if->pti_enh_enable) ? "enabled" : "disabled"));
++	DWC_PRINTF("Multiprocessor Interrupt Enhancement - %s\n",
++		   ((core_if->multiproc_int_enable) ? "enabled" : "disabled"));
++
++	/*
++	 * Program the GUSBCFG register.
++	 */
++	usbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++
++	switch (core_if->hwcfg2.b.op_mode) {
++	case DWC_MODE_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = (core_if->core_params->otg_cap ==
++				   DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_SRP_ONLY_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_HNP_SRP_CAPABLE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_DEVICE:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++
++	case DWC_MODE_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = (core_if->core_params->otg_cap !=
++				   DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		break;
++
++	case DWC_MODE_NO_SRP_CAPABLE_HOST:
++		usbcfg.b.hnpcap = 0;
++		usbcfg.b.srpcap = 0;
++		break;
++	}
++
++	DWC_WRITE_REG32(&global_regs->gusbcfg, usbcfg.d32);
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	if (core_if->core_params->lpm_enable) {
++		glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++		/* To enable LPM support set lpm_cap_en bit */
++		lpmcfg.b.lpm_cap_en = 1;
++
++		/* Make AppL1Res ACK */
++		lpmcfg.b.appl_resp = 1;
++
++		/* Retry 3 times */
++		lpmcfg.b.retry_count = 3;
++
++		DWC_MODIFY_REG32(&core_if->core_global_regs->glpmcfg,
++				 0, lpmcfg.d32);
++
++	}
++#endif
++	if (core_if->core_params->ic_usb_cap) {
++		gusbcfg_data_t gusbcfg = {.d32 = 0 };
++		gusbcfg.b.ic_usb_cap = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gusbcfg,
++				 0, gusbcfg.d32);
++	}
++	{
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.b.otgver = core_if->core_params->otg_ver;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl, 0,
++				 gotgctl.d32);
++		/* Set OTG version supported */
++		core_if->otg_ver = core_if->core_params->otg_ver;
++		DWC_PRINTF("OTG VER PARAM: %d, OTG VER FLAG: %d\n",
++			   core_if->core_params->otg_ver, core_if->otg_ver);
++	}
++
++
++	/* Enable common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Do device or host intialization based on mode during PCD
++	 * and HCD initialization  */
++	if (dwc_otg_is_host_mode(core_if)) {
++		DWC_DEBUGPL(DBG_ANY, "Host Mode\n");
++		core_if->op_state = A_HOST;
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "Device Mode\n");
++		core_if->op_state = B_PERIPHERAL;
++#ifdef DWC_DEVICE_ONLY
++		dwc_otg_core_dev_init(core_if);
++#endif
++	}
++}
++
++/**
++ * This function enables the Device mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * core_if)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_CIL, "%s()\n", __func__);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/* Enable interrupts */
++	intr_mask.b.usbreset = 1;
++	intr_mask.b.enumdone = 1;
++	/* Disable Disconnect interrupt in Device mode */
++	intr_mask.b.disconnect = 0;
++
++	if (!core_if->multiproc_int_enable) {
++		intr_mask.b.inepintr = 1;
++		intr_mask.b.outepintr = 1;
++	}
++
++	intr_mask.b.erlysuspend = 1;
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		intr_mask.b.epmismatch = 1;
++	}
++
++	//intr_mask.b.incomplisoout = 1;
++	intr_mask.b.incomplisoin = 1;
++
++/* Enable the ignore frame number for ISOC xfers - MAS */
++/* Disable to support high bandwith ISOC transfers - manukz */
++#if 0
++#ifdef DWC_UTE_PER_IO
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			dctl_data_t dctl1 = {.d32 = 0 };
++			dctl1.b.ifrmnum = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl1.d32);
++			DWC_DEBUG("----Enabled Ignore frame number (0x%08x)",
++				  DWC_READ_REG32(&core_if->dev_if->
++						 dev_global_regs->dctl));
++		}
++	}
++#endif
++#endif
++#ifdef DWC_EN_ISOC
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable == 0) {
++			if (core_if->pti_enh_enable) {
++				dctl_data_t dctl = {.d32 = 0 };
++				dctl.b.ifrmnum = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 dev_if->dev_global_regs->dctl,
++						 0, dctl.d32);
++			} else {
++				intr_mask.b.incomplisoin = 1;
++				intr_mask.b.incomplisoout = 1;
++			}
++		}
++	} else {
++		intr_mask.b.incomplisoin = 1;
++		intr_mask.b.incomplisoout = 1;
++	}
++#endif /* DWC_EN_ISOC */
++
++	/** @todo NGS: Should this be a module parameter? */
++#ifdef USE_PERIODIC_EP
++	intr_mask.b.isooutdrop = 1;
++	intr_mask.b.eopframe = 1;
++	intr_mask.b.incomplisoin = 1;
++	intr_mask.b.incomplisoout = 1;
++#endif
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++
++	DWC_DEBUGPL(DBG_CIL, "%s() gintmsk=%0x\n", __func__,
++		    DWC_READ_REG32(&global_regs->gintmsk));
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * device mode.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_dev_init(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	dcfg_data_t dcfg = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	uint32_t rx_fifo_size;
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t txfifosize;
++	dthrctl_data_t dthrctl;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	hwcfg3_data_t hwcfg3 = {.d32 = 0 };
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Device configuration register */
++	init_devspd(core_if);
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.descdma = (core_if->dma_desc_enable) ? 1 : 0;
++	dcfg.b.perfrint = DWC_DCFG_FRAME_INTERVAL_80;
++	/* Enable Device OUT NAK in case of DDMA mode*/
++	if (core_if->core_params->dev_out_nak) {
++		dcfg.b.endevoutnak = 1;
++	}
++
++	if (core_if->core_params->cont_on_bna) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.encontonbna = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++
++
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->dev_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->dev_nperio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++#ifdef DWC_UTE_CFI
++		core_if->pwron_rxfsiz = DWC_READ_REG32(&global_regs->grxfsiz);
++		core_if->init_rxfsiz = params->dev_rx_fifo_size;
++#endif
++		rx_fifo_size = params->dev_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->grxfsiz, rx_fifo_size);
++
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/** Set Periodic Tx FIFO Mask all bits 0 */
++		core_if->p_tx_msk = 0;
++
++		/** Set Tx FIFO Mask all bits 0 */
++		core_if->tx_msk = 0;
++
++		if (core_if->en_multiple_tx_fifo == 0) {
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			/**@todo NGS: Fix Periodic FIFO Sizing! */
++			/*
++			 * Periodic Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_perio_tx_fifo_size array and the FIFO size registers in
++			 * the dptxfsiz array run from 0 to 14.
++			 */
++			/** @todo Finish debug of this */
++			ptxfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++			for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; i++) {
++				ptxfifosize.b.depth =
++				    params->dev_perio_tx_fifo_size[i];
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n", i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						ptxfifosize.d32);
++				DWC_DEBUGPL(DBG_CIL, "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++				ptxfifosize.b.startaddr += ptxfifosize.b.depth;
++			}
++		} else {
++			/*
++			 * Tx FIFOs These FIFOs are numbered from 1 to 15.
++			 * Indexes of the FIFO size module parameters in the
++			 * dev_tx_fifo_size array and the FIFO size registers in
++			 * the dtxfsiz array run from 0 to 14.
++			 */
++
++			/* Non-periodic Tx FIFO */
++			DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++#ifdef DWC_UTE_CFI
++			core_if->pwron_gnptxfsiz =
++			    (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			core_if->init_gnptxfsiz =
++			    params->dev_nperio_tx_fifo_size;
++#endif
++			nptxfifosize.b.depth = params->dev_nperio_tx_fifo_size;
++			nptxfifosize.b.startaddr = params->dev_rx_fifo_size;
++
++			DWC_WRITE_REG32(&global_regs->gnptxfsiz,
++					nptxfifosize.d32);
++
++			DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++				    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++			txfifosize.b.startaddr =
++			    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++
++			for (i = 0; i < core_if->hwcfg4.b.num_in_eps; i++) {
++
++				txfifosize.b.depth =
++				    params->dev_tx_fifo_size[i];
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "initial dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++#ifdef DWC_UTE_CFI
++				core_if->pwron_txfsiz[i] =
++				    (DWC_READ_REG32
++				     (&global_regs->dtxfsiz[i]) >> 16);
++				core_if->init_txfsiz[i] =
++				    params->dev_tx_fifo_size[i];
++#endif
++				DWC_WRITE_REG32(&global_regs->dtxfsiz[i],
++						txfifosize.d32);
++
++				DWC_DEBUGPL(DBG_CIL,
++					    "new dtxfsiz[%d]=%08x\n",
++					    i,
++					    DWC_READ_REG32(&global_regs->dtxfsiz
++							   [i]));
++
++				txfifosize.b.startaddr += txfifosize.b.depth;
++			}
++			if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++				/* Calculating DFIFOCFG for Device mode to include RxFIFO and NPTXFIFO */
++				gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++				hwcfg3.d32 = DWC_READ_REG32(&global_regs->ghwcfg3);
++				gdfifocfg.b.gdfifocfg = (DWC_READ_REG32(&global_regs->ghwcfg3) >> 16);
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++				rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++				nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++				gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz;
++				DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++			}
++		}
++
++		/* Flush the FIFOs */
++		dwc_otg_flush_tx_fifo(core_if, 0x10);	/* all Tx FIFOs */
++		dwc_otg_flush_rx_fifo(core_if);
++
++		/* Flush the Learning Queue. */
++		resetctl.b.intknqflsh = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++			core_if->start_predict = 0;
++			for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++				core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++			}
++			core_if->nextep_seq[0] = 0;
++			core_if->first_in_nextep_seq = 0;
++			diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++			diepctl.b.nextep = 0;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++			/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt = 2;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_CILV,"%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_CILV, "%2d ", core_if->nextep_seq[i]);
++			}
++			DWC_DEBUGPL(DBG_CILV,"\n");
++		}
++
++		/* Clear all pending Device Interrupts */
++		/** @todo - if the condition needed to be checked
++		 *  or in any case all pending interrutps should be cleared?
++	     */
++		if (core_if->multiproc_int_enable) {
++			for (i = 0; i < core_if->dev_if->num_in_eps; ++i) {
++				DWC_WRITE_REG32(&dev_if->
++						dev_global_regs->diepeachintmsk[i], 0);
++			}
++		}
++
++		for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++			DWC_WRITE_REG32(&dev_if->
++					dev_global_regs->doepeachintmsk[i], 0);
++		}
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk, 0);
++	} else {
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, 0);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daint, 0xFFFFFFFF);
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk, 0);
++	}
++
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena) {
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, 0);
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepint, 0xFF);
++	}
++
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		depctl_data_t depctl;
++		depctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (depctl.b.epena) {
++			dctl_data_t dctl = {.d32 = 0 };
++			gintmsk_data_t gintsts = {.d32 = 0 };
++			doepint_data_t doepint = {.d32 = 0 };
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff);
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++					out_ep_regs[i]->doepint);
++			} while (!doepint.b.epdisabled);
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[i]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		} else {
++			depctl.d32 = 0;
++		}
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, depctl.d32);
++
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doeptsiz, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepdma, 0);
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepint, 0xFF);
++	}
++
++	if (core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		dev_if->non_iso_tx_thr_en = params->thr_ctl & 0x1;
++		dev_if->iso_tx_thr_en = (params->thr_ctl >> 1) & 0x1;
++		dev_if->rx_thr_en = (params->thr_ctl >> 2) & 0x1;
++
++		dev_if->rx_thr_length = params->rx_thr_length;
++		dev_if->tx_thr_length = params->tx_thr_length;
++
++		dev_if->setup_desc_index = 0;
++
++		dthrctl.d32 = 0;
++		dthrctl.b.non_iso_thr_en = dev_if->non_iso_tx_thr_en;
++		dthrctl.b.iso_thr_en = dev_if->iso_tx_thr_en;
++		dthrctl.b.tx_thr_len = dev_if->tx_thr_length;
++		dthrctl.b.rx_thr_en = dev_if->rx_thr_en;
++		dthrctl.b.rx_thr_len = dev_if->rx_thr_length;
++		dthrctl.b.ahb_thr_ratio = params->ahb_thr_ratio;
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dtknqr3_dthrctl,
++				dthrctl.d32);
++
++		DWC_DEBUGPL(DBG_CIL,
++			    "Non ISO Tx Thr - %d\nISO Tx Thr - %d\nRx Thr - %d\nTx Thr Len - %d\nRx Thr Len - %d\n",
++			    dthrctl.b.non_iso_thr_en, dthrctl.b.iso_thr_en,
++			    dthrctl.b.rx_thr_en, dthrctl.b.tx_thr_len,
++			    dthrctl.b.rx_thr_len);
++
++	}
++
++	dwc_otg_enable_device_interrupts(core_if);
++
++	{
++		diepmsk_data_t msk = {.d32 = 0 };
++		msk.b.txfifoundrn = 1;
++		if (core_if->multiproc_int_enable) {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->
++					 diepeachintmsk[0], msk.d32, msk.d32);
++		} else {
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk,
++					 msk.d32, msk.d32);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		/* Set NAK on Babble */
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.nakonbble = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, 0, dctl.d32);
++	}
++
++	if (core_if->snpsid >= OTG_CORE_REV_2_94a) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++		dctl.b.sftdiscon = 0;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl, dctl.d32);
++	}
++}
++
++/**
++ * This function enables the Host mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CIL, "%s(%p)\n", __func__, core_if);
++
++	/* Disable all interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++	/* Clear any pending interrupts. */
++	DWC_WRITE_REG32(&global_regs->gintsts, 0xFFFFFFFF);
++
++	/* Enable the common interrupts */
++	dwc_otg_enable_common_interrupts(core_if);
++
++	/*
++	 * Enable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++
++	intr_mask.b.disconnect = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, intr_mask.d32);
++}
++
++/**
++ * This function disables the Host Mode interrupts.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s()\n", __func__);
++
++	/*
++	 * Disable host mode interrupts without disturbing common
++	 * interrupts.
++	 */
++	intr_mask.b.sofintr = 1;
++	intr_mask.b.portintr = 1;
++	intr_mask.b.hcintr = 1;
++	intr_mask.b.ptxfempty = 1;
++	intr_mask.b.nptxfempty = 1;
++
++	DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32, 0);
++}
++
++/**
++ * This function initializes the DWC_otg controller registers for
++ * host mode.
++ *
++ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
++ * request queues. Host channels are reset to ensure that they are ready for
++ * performing transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ *
++ */
++void dwc_otg_core_host_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_core_params_t *params = core_if->core_params;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++	fifosize_data_t nptxfifosize;
++	fifosize_data_t ptxfifosize;
++	uint16_t rxfsiz, nptxfsiz, hptxfsiz;
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	int i;
++	hcchar_data_t hcchar;
++	hcfg_data_t hcfg;
++	hfir_data_t hfir;
++	dwc_otg_hc_regs_t *hc_regs;
++	int num_channels;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_CILV, "%s(%p)\n", __func__, core_if);
++
++	/* Restart the Phy Clock */
++	DWC_WRITE_REG32(core_if->pcgcctl, 0);
++
++	/* Initialize Host Configuration Register */
++	init_fslspclksel(core_if);
++	if (core_if->core_params->speed == DWC_SPEED_PARAM_FULL) {
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.fslssupp = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++
++	}
++
++	/* This bit allows dynamic reloading of the HFIR register
++	 * during runtime. This bit needs to be programmed during
++	 * initial configuration and its value must not be changed
++	 * during runtime.*/
++	if (core_if->core_params->reload_ctl == 1) {
++		hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++		hfir.b.hfirrldctrl = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++	}
++
++	if (core_if->core_params->dma_desc_enable) {
++		uint8_t op_mode = core_if->hwcfg2.b.op_mode;
++		if (!
++		    (core_if->hwcfg4.b.desc_dma
++		     && (core_if->snpsid >= OTG_CORE_REV_2_90a)
++		     && ((op_mode == DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG)
++			 || (op_mode == DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)
++			 || (op_mode ==
++			     DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST)))) {
++
++			DWC_ERROR("Host can't operate in Descriptor DMA mode.\n"
++				  "Either core version is below 2.90a or "
++				  "GHWCFG2, GHWCFG4 registers' values do not allow Descriptor DMA in host mode.\n"
++				  "To run the driver in Buffer DMA host mode set dma_desc_enable "
++				  "module parameter to 0.\n");
++			return;
++		}
++		hcfg.d32 = DWC_READ_REG32(&host_if->host_global_regs->hcfg);
++		hcfg.b.descdma = 1;
++		DWC_WRITE_REG32(&host_if->host_global_regs->hcfg, hcfg.d32);
++	}
++
++	/* Configure data FIFO sizes */
++	if (core_if->hwcfg2.b.dynamic_fifo && params->enable_dynamic_fifo) {
++		DWC_DEBUGPL(DBG_CIL, "Total FIFO Size=%d\n",
++			    core_if->total_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "Rx FIFO Size=%d\n",
++			    params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "NP Tx FIFO Size=%d\n",
++			    params->host_nperio_tx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "P Tx FIFO Size=%d\n",
++			    params->host_perio_tx_fifo_size);
++
++		/* Rx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++		DWC_WRITE_REG32(&global_regs->grxfsiz,
++				params->host_rx_fifo_size);
++		DWC_DEBUGPL(DBG_CIL, "new grxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->grxfsiz));
++
++		/* Non-periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++		nptxfifosize.b.depth = params->host_nperio_tx_fifo_size;
++		nptxfifosize.b.startaddr = params->host_rx_fifo_size;
++		DWC_WRITE_REG32(&global_regs->gnptxfsiz, nptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new gnptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->gnptxfsiz));
++
++		/* Periodic Tx FIFO */
++		DWC_DEBUGPL(DBG_CIL, "initial hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++		ptxfifosize.b.depth = params->host_perio_tx_fifo_size;
++		ptxfifosize.b.startaddr =
++		    nptxfifosize.b.startaddr + nptxfifosize.b.depth;
++		DWC_WRITE_REG32(&global_regs->hptxfsiz, ptxfifosize.d32);
++		DWC_DEBUGPL(DBG_CIL, "new hptxfsiz=%08x\n",
++			    DWC_READ_REG32(&global_regs->hptxfsiz));
++
++		if (core_if->en_multiple_tx_fifo
++		    && core_if->snpsid <= OTG_CORE_REV_2_94a) {
++			/* Global DFIFOCFG calculation for Host mode - include RxFIFO, NPTXFIFO and HPTXFIFO */
++			gdfifocfg.d32 = DWC_READ_REG32(&global_regs->gdfifocfg);
++			rxfsiz = (DWC_READ_REG32(&global_regs->grxfsiz) & 0x0000ffff);
++			nptxfsiz = (DWC_READ_REG32(&global_regs->gnptxfsiz) >> 16);
++			hptxfsiz = (DWC_READ_REG32(&global_regs->hptxfsiz) >> 16);
++			gdfifocfg.b.epinfobase = rxfsiz + nptxfsiz + hptxfsiz;
++			DWC_WRITE_REG32(&global_regs->gdfifocfg, gdfifocfg.d32);
++		}
++	}
++
++	/* TODO - check this */
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	/* Make sure the FIFOs are flushed. */
++	dwc_otg_flush_tx_fifo(core_if, 0x10 /* all TX FIFOs */ );
++	dwc_otg_flush_rx_fifo(core_if);
++
++	/* Clear Host Set HNP Enable in the OTG Control Register */
++	gotgctl.b.hstsethnpen = 1;
++	DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++
++	if (!core_if->core_params->dma_desc_enable) {
++		/* Flush out any leftover queued requests. */
++		num_channels = core_if->core_params->host_channels;
++
++		for (i = 0; i < num_channels; i++) {
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 0;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		}
++
++		/* Halt all channels to put them into a known state. */
++		for (i = 0; i < num_channels; i++) {
++			int count = 0;
++			hc_regs = core_if->host_if->hc_regs[i];
++			hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++			hcchar.b.chen = 1;
++			hcchar.b.chdis = 1;
++			hcchar.b.epdir = 0;
++			DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++			DWC_DEBUGPL(DBG_HCDV, "%s: Halt channel %d regs %p\n", __func__, i, hc_regs);
++			do {
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (++count > 1000) {
++					DWC_ERROR
++					    ("%s: Unable to clear halt on channel %d (timeout HCCHAR 0x%X @%p)\n",
++					     __func__, i, hcchar.d32, &hc_regs->hcchar);
++					break;
++				}
++				dwc_udelay(1);
++			} while (hcchar.b.chen);
++		}
++	}
++
++	/* Turn on the vbus power. */
++	DWC_PRINTF("Init: Port Power? op_state=%d\n", core_if->op_state);
++	if (core_if->op_state == A_HOST) {
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		DWC_PRINTF("Init: Power Port (%d)\n", hprt0.b.prtpwr);
++		if (hprt0.b.prtpwr == 0) {
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(host_if->hprt0, hprt0.d32);
++		}
++	}
++
++	dwc_otg_enable_host_interrupts(core_if);
++}
++
++/**
++ * Prepares a host channel for transferring packets to/from a specific
++ * endpoint. The HCCHARn register is set up with the characteristics specified
++ * in _hc. Host channel interrupts that may need to be serviced while this
++ * transfer is in progress are enabled.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ * @param hc Information needed to initialize the host channel
++ */
++void dwc_otg_hc_init(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t intr_enable;
++	hcintmsk_data_t hc_intr_mask;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++
++	uint8_t hc_num = hc->hc_num;
++	dwc_otg_host_if_t *host_if = core_if->host_if;
++	dwc_otg_hc_regs_t *hc_regs = host_if->hc_regs[hc_num];
++
++	/* Clear old interrupt conditions for this host channel. */
++	hc_intr_mask.d32 = 0xFFFFFFFF;
++	hc_intr_mask.b.reserved14_31 = 0;
++	DWC_WRITE_REG32(&hc_regs->hcint, hc_intr_mask.d32);
++
++	/* Enable channel interrupts required for this transfer. */
++	hc_intr_mask.d32 = 0;
++	hc_intr_mask.b.chhltd = 1;
++	if (core_if->dma_enable) {
++		/* For Descriptor DMA mode core halts the channel on AHB error. Interrupt is not required */
++		if (!core_if->dma_desc_enable)
++			hc_intr_mask.b.ahberr = 1;
++		else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++				hc_intr_mask.b.xfercompl = 1;
++		}
++
++		if (hc->error_state && !hc->do_split &&
++		    hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			hc_intr_mask.b.ack = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.datatglerr = 1;
++				if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++					hc_intr_mask.b.nak = 1;
++				}
++			}
++		}
++	} else {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			} else {
++				hc_intr_mask.b.nak = 1;
++				hc_intr_mask.b.nyet = 1;
++				if (hc->do_ping) {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->do_split) {
++				hc_intr_mask.b.nak = 1;
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			break;
++		case DWC_OTG_EP_TYPE_INTR:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.nak = 1;
++			hc_intr_mask.b.stall = 1;
++			hc_intr_mask.b.xacterr = 1;
++			hc_intr_mask.b.datatglerr = 1;
++			hc_intr_mask.b.frmovrun = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.bblerr = 1;
++			}
++			if (hc->error_state) {
++				hc_intr_mask.b.ack = 1;
++			}
++			if (hc->do_split) {
++				if (hc->complete_split) {
++					hc_intr_mask.b.nyet = 1;
++				} else {
++					hc_intr_mask.b.ack = 1;
++				}
++			}
++			break;
++		case DWC_OTG_EP_TYPE_ISOC:
++			hc_intr_mask.b.xfercompl = 1;
++			hc_intr_mask.b.frmovrun = 1;
++			hc_intr_mask.b.ack = 1;
++
++			if (hc->ep_is_in) {
++				hc_intr_mask.b.xacterr = 1;
++				hc_intr_mask.b.bblerr = 1;
++			}
++			break;
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, hc_intr_mask.d32);
++
++	/* Enable the top level host channel interrupt. */
++	intr_enable = (1 << hc_num);
++	DWC_MODIFY_REG32(&host_if->host_global_regs->haintmsk, 0, intr_enable);
++
++	/* Make sure host channel interrupts are enabled. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk.d32);
++
++	/*
++	 * Program the HCCHARn register with the endpoint characteristics for
++	 * the current transfer.
++	 */
++	hcchar.d32 = 0;
++	hcchar.b.devaddr = hc->dev_addr;
++	hcchar.b.epnum = hc->ep_num;
++	hcchar.b.epdir = hc->ep_is_in;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.eptype = hc->ep_type;
++	hcchar.b.mps = hc->max_packet;
++
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcchar, hcchar.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d, Dev Addr %d, EP #%d\n",
++                    __func__, hc->hc_num, hcchar.b.devaddr, hcchar.b.epnum);
++	DWC_DEBUGPL(DBG_HCDV, "	 Is In %d, Is Low Speed %d, EP Type %d, "
++                                "Max Pkt %d, Multi Cnt %d\n",
++                    hcchar.b.epdir, hcchar.b.lspddev, hcchar.b.eptype,
++                    hcchar.b.mps, hcchar.b.multicnt);
++
++	/*
++	 * Program the HCSPLIT register for SPLITs
++	 */
++	hcsplt.d32 = 0;
++	if (hc->do_split) {
++		DWC_DEBUGPL(DBG_HCDV, "Programming HC %d with split --> %s\n",
++			    hc->hc_num,
++			    hc->complete_split ? "CSPLIT" : "SSPLIT");
++		hcsplt.b.compsplt = hc->complete_split;
++		hcsplt.b.xactpos = hc->xact_pos;
++		hcsplt.b.hubaddr = hc->hub_addr;
++		hcsplt.b.prtaddr = hc->port_addr;
++		DWC_DEBUGPL(DBG_HCDV, "\t  comp split %d\n", hc->complete_split);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xact pos %d\n", hc->xact_pos);
++		DWC_DEBUGPL(DBG_HCDV, "\t  hub addr %d\n", hc->hub_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  port addr %d\n", hc->port_addr);
++		DWC_DEBUGPL(DBG_HCDV, "\t  is_in %d\n", hc->ep_is_in);
++		DWC_DEBUGPL(DBG_HCDV, "\t  Max Pkt: %d\n", hcchar.b.mps);
++		DWC_DEBUGPL(DBG_HCDV, "\t  xferlen: %d\n", hc->xfer_len);
++	}
++	DWC_WRITE_REG32(&host_if->hc_regs[hc_num]->hcsplt, hcsplt.d32);
++
++}
++
++/**
++ * Attempts to halt a host channel. This function should only be called in
++ * Slave mode or to abort a transfer in either Slave mode or DMA mode. Under
++ * normal circumstances in DMA mode, the controller halts the channel when the
++ * transfer is complete or a condition occurs that requires application
++ * intervention.
++ *
++ * In slave mode, checks for a free request queue entry, then sets the Channel
++ * Enable and Channel Disable bits of the Host Channel Characteristics
++ * register of the specified channel to intiate the halt. If there is no free
++ * request queue entry, sets only the Channel Disable bit of the HCCHARn
++ * register to flush requests for this channel. In the latter case, sets a
++ * flag to indicate that the host channel needs to be halted when a request
++ * queue slot is open.
++ *
++ * In DMA mode, always sets the Channel Enable and Channel Disable bits of the
++ * HCCHARn register. The controller ensures there is space in the request
++ * queue before submitting the halt request.
++ *
++ * Some time may elapse before the core flushes any posted requests for this
++ * host channel and halts. The Channel Halted interrupt handler completes the
++ * deactivation of the host channel.
++ *
++ * @param core_if Controller register interface.
++ * @param hc Host channel to halt.
++ * @param halt_status Reason for halting the channel.
++ */
++void dwc_otg_hc_halt(dwc_otg_core_if_t * core_if,
++		     dwc_hc_t * hc, dwc_otg_halt_status_e halt_status)
++{
++	gnptxsts_data_t nptxsts;
++	hptxsts_data_t hptxsts;
++	hcchar_data_t hcchar;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_core_global_regs_t *global_regs;
++	dwc_otg_host_global_regs_t *host_global_regs;
++
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	global_regs = core_if->core_global_regs;
++	host_global_regs = core_if->host_if->host_global_regs;
++
++	DWC_ASSERT(!(halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS),
++		   "halt_status = %d\n", halt_status);
++
++	if (halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		/*
++		 * Disable all channel interrupts except Ch Halted. The QTD
++		 * and QH state associated with this transfer has been cleared
++		 * (in the case of URB_DEQUEUE), so the channel needs to be
++		 * shut down carefully to prevent crashes.
++		 */
++		hcintmsk_data_t hcintmsk;
++		hcintmsk.d32 = 0;
++		hcintmsk.b.chhltd = 1;
++		DWC_WRITE_REG32(&hc_regs->hcintmsk, hcintmsk.d32);
++
++		/*
++		 * Make sure no other interrupts besides halt are currently
++		 * pending. Handling another interrupt could cause a crash due
++		 * to the QTD and QH state.
++		 */
++		DWC_WRITE_REG32(&hc_regs->hcint, ~hcintmsk.d32);
++
++		/*
++		 * Make sure the halt status is set to URB_DEQUEUE or AHB_ERR
++		 * even if the channel was already halted for some other
++		 * reason.
++		 */
++		hc->halt_status = halt_status;
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		if (hcchar.b.chen == 0) {
++			/*
++			 * The channel is either already halted or it hasn't
++			 * started yet. In DMA mode, the transfer may halt if
++			 * it finishes normally or a condition occurs that
++			 * requires driver intervention. Don't want to halt
++			 * the channel again. In either Slave or DMA mode,
++			 * it's possible that the transfer has been assigned
++			 * to a channel, but not started yet when an URB is
++			 * dequeued. Don't want to halt a channel that hasn't
++			 * started yet.
++			 */
++			return;
++		}
++	}
++	if (hc->halt_pending) {
++		/*
++		 * A halt has already been issued for this channel. This might
++		 * happen when a transfer is aborted by a higher level in
++		 * the stack.
++		 */
++#ifdef DEBUG
++		DWC_PRINTF
++		    ("*** %s: Channel %d, _hc->halt_pending already set ***\n",
++		     __func__, hc->hc_num);
++
++#endif
++		return;
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* No need to set the bit in DDMA for disabling the channel */
++	//TODO check it everywhere channel is disabled
++	if (!core_if->core_params->dma_desc_enable)
++		hcchar.b.chen = 1;
++	hcchar.b.chdis = 1;
++
++	if (!core_if->dma_enable) {
++		/* Check for space in the request queue to issue the halt. */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			nptxsts.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++			if (nptxsts.b.nptxqspcavail == 0) {
++				hcchar.b.chen = 0;
++			}
++		} else {
++			hptxsts.d32 =
++			    DWC_READ_REG32(&host_global_regs->hptxsts);
++			if ((hptxsts.b.ptxqspcavail == 0)
++			    || (core_if->queuing_high_bandwidth)) {
++				hcchar.b.chen = 0;
++			}
++		}
++	}
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->halt_status = halt_status;
++
++	if (hcchar.b.chen) {
++		hc->halt_pending = 1;
++		hc->halt_on_queue = 0;
++	} else {
++		hc->halt_on_queue = 1;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 hcchar: 0x%08x\n", hcchar.d32);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_pending: %d\n", hc->halt_pending);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_on_queue: %d\n", hc->halt_on_queue);
++	DWC_DEBUGPL(DBG_HCDV, "	 halt_status: %d\n", hc->halt_status);
++
++	return;
++}
++
++/**
++ * Clears the transfer state for a host channel. This function is normally
++ * called after a transfer is done and the host channel is being released.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to clean up.
++ */
++void dwc_otg_hc_cleanup(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs;
++
++	hc->xfer_started = 0;
++
++	/*
++	 * Clear channel interrupt enables and any unhandled channel interrupt
++	 * conditions.
++	 */
++	hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0);
++	DWC_WRITE_REG32(&hc_regs->hcint, 0xFFFFFFFF);
++#ifdef DEBUG
++	DWC_TIMER_CANCEL(core_if->hc_xfer_timer[hc->hc_num]);
++#endif
++}
++
++/**
++ * Sets the channel property that indicates in which frame a periodic transfer
++ * should occur. This is always set to the _next_ frame. This function has no
++ * effect on non-periodic transfers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Identifies the host channel to set up and its properties.
++ * @param hcchar Current value of the HCCHAR register for the specified host
++ * channel.
++ */
++static inline void hc_set_even_odd_frame(dwc_otg_core_if_t * core_if,
++					 dwc_hc_t * hc, hcchar_data_t * hcchar)
++{
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		hfnum_data_t hfnum;
++		hfnum.d32 =
++		    DWC_READ_REG32(&core_if->host_if->host_global_regs->hfnum);
++
++		/* 1 if _next_ frame is odd, 0 if it's even */
++		hcchar->b.oddfrm = (hfnum.b.frnum & 0x1) ? 0 : 1;
++#ifdef DEBUG
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR && hc->do_split
++		    && !hc->complete_split) {
++			switch (hfnum.b.frnum & 0x7) {
++			case 7:
++				core_if->hfnum_7_samples++;
++				core_if->hfnum_7_frrem_accum += hfnum.b.frrem;
++				break;
++			case 0:
++				core_if->hfnum_0_samples++;
++				core_if->hfnum_0_frrem_accum += hfnum.b.frrem;
++				break;
++			default:
++				core_if->hfnum_other_samples++;
++				core_if->hfnum_other_frrem_accum +=
++				    hfnum.b.frrem;
++				break;
++			}
++		}
++#endif
++	}
++}
++
++#ifdef DEBUG
++void hc_xfer_timeout(void *ptr)
++{
++	hc_xfer_info_t *xfer_info = NULL;
++	int hc_num = 0;
++
++	if (ptr)
++		xfer_info = (hc_xfer_info_t *) ptr;
++
++	if (!xfer_info->hc) {
++		DWC_ERROR("xfer_info->hc = %p\n", xfer_info->hc);
++		return;
++	}
++
++	hc_num = xfer_info->hc->hc_num;
++	DWC_WARN("%s: timeout on channel %d\n", __func__, hc_num);
++	DWC_WARN("	start_hcchar_val 0x%08x\n",
++		 xfer_info->core_if->start_hcchar_val[hc_num]);
++}
++#endif
++
++void ep_xfer_timeout(void *ptr)
++{
++	ep_xfer_info_t *xfer_info = NULL;
++	int ep_num = 0;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (ptr)
++		xfer_info = (ep_xfer_info_t *) ptr;
++
++	if (!xfer_info->ep) {
++		DWC_ERROR("xfer_info->ep = %p\n", xfer_info->ep);
++		return;
++	}
++
++	ep_num = xfer_info->ep->num;
++	DWC_WARN("%s: timeout on endpoit %d\n", __func__, ep_num);
++	/* Put the sate to 2 as it was time outed */
++	xfer_info->state = 2;
++
++	dctl.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintsts);
++	gintmsk.d32 =
++	    DWC_READ_REG32(&xfer_info->core_if->core_global_regs->gintmsk);
++
++	if (!gintmsk.b.goutnakeff) {
++		/* Unmask it */
++		gintmsk.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&xfer_info->core_if->core_global_regs->gintmsk,
++				gintmsk.d32);
++
++	}
++
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&xfer_info->core_if->dev_if->dev_global_regs->dctl,
++			dctl.d32);
++
++}
++
++void set_pid_isoc(dwc_hc_t * hc)
++{
++	/* Set up the initial PID for the transfer. */
++	if (hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++		if (hc->ep_is_in) {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else if (hc->multi_count == 2) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA2;
++			}
++		} else {
++			if (hc->multi_count == 1) {
++				hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++			} else {
++				hc->data_pid_start = DWC_OTG_HC_PID_MDATA;
++			}
++		}
++	} else {
++		hc->data_pid_start = DWC_OTG_HC_PID_DATA0;
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel and
++ * starts the transfer. May be called in either Slave mode or DMA mode. In
++ * Slave mode, the caller must ensure that there is sufficient space in the
++ * request queue and Tx Data FIFO.
++ *
++ * For an OUT transfer in Slave mode, it loads a data packet into the
++ * appropriate FIFO. If necessary, additional data packets will be loaded in
++ * the Host ISR.
++ *
++ * For an IN transfer in Slave mode, a data packet is requested. The data
++ * packets are unloaded from the Rx FIFO in the Host ISR. If necessary,
++ * additional data packets are requested in the Host ISR.
++ *
++ * For a PING transfer in Slave mode, the Do Ping bit is set in the HCTSIZ
++ * register along with a packet count of 1 and the channel is enabled. This
++ * causes a single PING transaction to occur. Other fields in HCTSIZ are
++ * simply set to 0 since no data transfer occurs in this case.
++ *
++ * For a PING transfer in DMA mode, the HCTSIZ register is initialized with
++ * all the information required to perform the subsequent data transfer. In
++ * addition, the Do Ping bit is set in the HCTSIZ register. In this case, the
++ * controller performs the entire PING protocol, then starts the data
++ * transfer.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel. The xfer_len
++ * value may be reduced to accommodate the max widths of the XferSize and
++ * PktCnt fields in the HCTSIZn register. The multi_count value may be changed
++ * to reflect the final xfer_len value.
++ */
++void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	uint16_t num_packets;
++	uint32_t max_hc_xfer_size = core_if->core_params->max_transfer_size;
++	uint16_t max_hc_pkt_count = core_if->core_params->max_packet_count;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping) {
++		if (!core_if->dma_enable) {
++			dwc_otg_hc_do_ping(core_if, hc);
++			hc->xfer_started = 1;
++			return;
++		} else {
++			hctsiz.b.dopng = 1;
++		}
++	}
++
++	if (hc->do_split) {
++		num_packets = 1;
++
++		if (hc->complete_split && !hc->ep_is_in) {
++			/* For CSPLIT OUT Transfer, set the size to 0 so the
++			 * core doesn't expect any data written to the FIFO */
++			hc->xfer_len = 0;
++		} else if (hc->ep_is_in || (hc->xfer_len > hc->max_packet)) {
++			hc->xfer_len = hc->max_packet;
++		} else if (!hc->ep_is_in && (hc->xfer_len > 188)) {
++			hc->xfer_len = 188;
++		}
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	} else {
++		/*
++		 * Ensure that the transfer length and packet count will fit
++		 * in the widths allocated for them in the HCTSIZn register.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure the transfer size is no larger than one
++			 * (micro)frame's worth of data. (A check was done
++			 * when the periodic transfer was accepted to ensure
++			 * that a (micro)frame's worth of data can be
++			 * programmed into a channel.)
++			 */
++			uint32_t max_periodic_len =
++			    hc->multi_count * hc->max_packet;
++			if (hc->xfer_len > max_periodic_len) {
++				hc->xfer_len = max_periodic_len;
++			} else {
++			}
++		} else if (hc->xfer_len > max_hc_xfer_size) {
++			/* Make sure that xfer_len is a multiple of max packet size. */
++			hc->xfer_len = max_hc_xfer_size - hc->max_packet + 1;
++		}
++
++		if (hc->xfer_len > 0) {
++			num_packets =
++			    (hc->xfer_len + hc->max_packet -
++			     1) / hc->max_packet;
++			if (num_packets > max_hc_pkt_count) {
++				num_packets = max_hc_pkt_count;
++				hc->xfer_len = num_packets * hc->max_packet;
++			}
++		} else {
++			/* Need 1 packet for transfer length of 0. */
++			num_packets = 1;
++		}
++
++		if (hc->ep_is_in) {
++			/* Always program an integral # of max packets for IN transfers. */
++			hc->xfer_len = num_packets * hc->max_packet;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			/*
++			 * Make sure that the multi_count field matches the
++			 * actual transfer length.
++			 */
++			hc->multi_count = num_packets;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++			set_pid_isoc(hc);
++
++		hctsiz.b.xfersize = hc->xfer_len;
++	}
++
++	hc->start_pkt_count = num_packets;
++	hctsiz.b.pktcnt = num_packets;
++	hctsiz.b.pid = hc->data_pid_start;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Xfer Size: %d\n", hctsiz.b.xfersize);
++	DWC_DEBUGPL(DBG_HCDV, "	 Num Pkts: %d\n", hctsiz.b.pktcnt);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++
++	if (core_if->dma_enable) {
++		dwc_dma_t dma_addr;
++		if (hc->align_buff) {
++			dma_addr = hc->align_buff;
++		} else {
++			dma_addr = ((unsigned long)hc->xfer_buff & 0xffffffff);
++		}
++		DWC_WRITE_REG32(&hc_regs->hcdma, dma_addr);
++	}
++
++	/* Start the split */
++	if (hc->do_split) {
++		hcsplt_data_t hcsplt;
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hcsplt.b.spltena = 1;
++		DWC_WRITE_REG32(&hc_regs->hcsplt, hcsplt.d32);
++	}
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++	hc_set_even_odd_frame(core_if, hc, &hcchar);
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++	if (!core_if->dma_enable && !hc->ep_is_in && hc->xfer_len > 0) {
++		/* Load OUT packet into the appropriate Tx FIFO. */
++		dwc_otg_hc_write_packet(core_if, hc);
++	}
++#ifdef DEBUG
++	if (hc->ep_type != DWC_OTG_EP_TYPE_INTR) {
++                DWC_DEBUGPL(DBG_HCDV, "transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++}
++
++/**
++ * This function does the setup for a data transfer for a host channel
++ * and starts the transfer in Descriptor DMA mode.
++ *
++ * Initializes HCTSIZ register. For a PING transfer the Do Ping bit is set.
++ * Sets PID and NTD values. For periodic transfers
++ * initializes SCHED_INFO field with micro-frame bitmap.
++ *
++ * Initializes HCDMA register with descriptor list address and CTD value
++ * then starts the transfer via enabling the channel.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param hc Information needed to initialize the host channel.
++ */
++void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcdma_data_t hcdma;
++
++	hctsiz.d32 = 0;
++
++	if (hc->do_ping)
++		hctsiz.b_ddma.dopng = 1;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		set_pid_isoc(hc);
++
++	/* Packet Count and Xfer Size are not used in Descriptor DMA mode */
++	hctsiz.b_ddma.pid = hc->data_pid_start;
++	hctsiz.b_ddma.ntd = hc->ntd - 1;	/* 0 - 1 descriptor, 1 - 2 descriptors, etc. */
++	hctsiz.b_ddma.schinfo = hc->schinfo;	/* Non-zero only for high-speed interrupt endpoints */
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++	DWC_DEBUGPL(DBG_HCDV, "	 Start PID: %d\n", hctsiz.b.pid);
++	DWC_DEBUGPL(DBG_HCDV, "	 NTD: %d\n", hctsiz.b_ddma.ntd);
++
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcdma.d32 = 0;
++	hcdma.b.dma_addr = ((uint32_t) hc->desc_list_addr) >> 11;
++
++	/* Always start from first descriptor. */
++	hcdma.b.ctd = 0;
++	DWC_WRITE_REG32(&hc_regs->hcdma, hcdma.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.multicnt = hc->multi_count;
++
++#ifdef DEBUG
++	core_if->start_hcchar_val[hc->hc_num] = hcchar.d32;
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: chdis set, channel %d, hcchar 0x%08x\n",
++			 __func__, hc->hc_num, hcchar.d32);
++	}
++#endif
++
++	/* Set host channel enable after all other setup is complete. */
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	hc->xfer_started = 1;
++	hc->requests++;
++
++#ifdef DEBUG
++	if ((hc->ep_type != DWC_OTG_EP_TYPE_INTR)
++	    && (hc->ep_type != DWC_OTG_EP_TYPE_ISOC)) {
++                DWC_DEBUGPL(DBG_HCDV, "DMA transfer %d from core_if %p\n",
++                            hc->hc_num, core_if);//GRAYG
++		core_if->hc_xfer_info[hc->hc_num].core_if = core_if;
++		core_if->hc_xfer_info[hc->hc_num].hc = hc;
++		/* Start a timer for this transfer. */
++		DWC_TIMER_SCHEDULE(core_if->hc_xfer_timer[hc->hc_num], 10000);
++	}
++#endif
++
++}
++
++/**
++ * This function continues a data transfer that was started by previous call
++ * to <code>dwc_otg_hc_start_transfer</code>. The caller must ensure there is
++ * sufficient space in the request queue and Tx Data FIFO. This function
++ * should only be called in Slave mode. In DMA mode, the controller acts
++ * autonomously to complete transfers programmed to a host channel.
++ *
++ * For an OUT transfer, a new data packet is loaded into the appropriate FIFO
++ * if there is any data remaining to be queued. For an IN transfer, another
++ * data packet is always requested. For the SETUP phase of a control transfer,
++ * this function does nothing.
++ *
++ * @return 1 if a new request is queued, 0 if no more requests are required
++ * for this transfer.
++ */
++int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	if (hc->do_split) {
++		/* SPLITs always queue just once per channel */
++		return 0;
++	} else if (hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		/* SETUPs are queued only once since they can't be NAKed. */
++		return 0;
++	} else if (hc->ep_is_in) {
++		/*
++		 * Always queue another request for other IN transfers. If
++		 * back-to-back INs are issued and NAKs are received for both,
++		 * the driver may still be processing the first NAK when the
++		 * second NAK is received. When the interrupt handler clears
++		 * the NAK interrupt for the first NAK, the second NAK will
++		 * not be seen. So we can't depend on the NAK interrupt
++		 * handler to requeue a NAKed request. Instead, IN requests
++		 * are issued each time this function is called. When the
++		 * transfer completes, the extra requests for the channel will
++		 * be flushed.
++		 */
++		hcchar_data_t hcchar;
++		dwc_otg_hc_regs_t *hc_regs =
++		    core_if->host_if->hc_regs[hc->hc_num];
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hc_set_even_odd_frame(core_if, hc, &hcchar);
++		hcchar.b.chen = 1;
++		hcchar.b.chdis = 0;
++		DWC_DEBUGPL(DBG_HCDV, "	 IN xfer: hcchar = 0x%08x\n",
++			    hcchar.d32);
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		hc->requests++;
++		return 1;
++	} else {
++		/* OUT transfers. */
++		if (hc->xfer_count < hc->xfer_len) {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				hcchar_data_t hcchar;
++				dwc_otg_hc_regs_t *hc_regs;
++				hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				hc_set_even_odd_frame(core_if, hc, &hcchar);
++			}
++
++			/* Load OUT packet into the appropriate Tx FIFO. */
++			dwc_otg_hc_write_packet(core_if, hc);
++			hc->requests++;
++			return 1;
++		} else {
++			return 0;
++		}
++	}
++}
++
++/**
++ * Starts a PING transfer. This function should only be called in Slave mode.
++ * The Do Ping bit is set in the HCTSIZ register, then the channel is enabled.
++ */
++void dwc_otg_hc_do_ping(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	dwc_otg_hc_regs_t *hc_regs = core_if->host_if->hc_regs[hc->hc_num];
++
++	DWC_DEBUGPL(DBG_HCDV, "%s: Channel %d\n", __func__, hc->hc_num);
++
++	hctsiz.d32 = 0;
++	hctsiz.b.dopng = 1;
++	hctsiz.b.pktcnt = 1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.chen = 1;
++	hcchar.b.chdis = 0;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++}
++
++/*
++ * This function writes a packet into the Tx FIFO associated with the Host
++ * Channel. For a channel associated with a non-periodic EP, the non-periodic
++ * Tx FIFO is written. For a channel associated with a periodic EP, the
++ * periodic Tx FIFO is written. This function should only be called in Slave
++ * mode.
++ *
++ * Upon return the xfer_buff and xfer_count fields in _hc are incremented by
++ * then number of bytes written to the Tx FIFO.
++ */
++void dwc_otg_hc_write_packet(dwc_otg_core_if_t * core_if, dwc_hc_t * hc)
++{
++	uint32_t i;
++	uint32_t remaining_count;
++	uint32_t byte_count;
++	uint32_t dword_count;
++
++	uint32_t *data_buff = (uint32_t *) (hc->xfer_buff);
++	uint32_t *data_fifo = core_if->data_fifo[hc->hc_num];
++
++	remaining_count = hc->xfer_len - hc->xfer_count;
++	if (remaining_count > hc->max_packet) {
++		byte_count = hc->max_packet;
++	} else {
++		byte_count = remaining_count;
++	}
++
++	dword_count = (byte_count + 3) / 4;
++
++	if ((((unsigned long)data_buff) & 0x3) == 0) {
++		/* xfer_buff is DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(data_fifo, *data_buff);
++		}
++	} else {
++		/* xfer_buff is not DWORD aligned. */
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			uint32_t data;
++			data =
++			    (data_buff[0] | data_buff[1] << 8 | data_buff[2] <<
++			     16 | data_buff[3] << 24);
++			DWC_WRITE_REG32(data_fifo, data);
++		}
++	}
++
++	hc->xfer_count += byte_count;
++	hc->xfer_buff += byte_count;
++}
++
++/**
++ * Gets the current USB frame number. This is the frame number from the last
++ * SOF packet.
++ */
++uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/* read current frame/microframe number from DSTS register */
++	return dsts.b.soffn;
++}
++
++/**
++ * Calculates and gets the frame Interval value of HFIR register according PHY
++ * type and speed.The application can modify a value of HFIR register only after
++ * the Port Enable bit of the Host Port Control and Status register
++ * (HPRT.PrtEnaPort) has been set.
++*/
++
++uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	hwcfg2_data_t hwcfg2;
++	hprt0_data_t hprt0;
++	int clock = 60;		// default value
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	hwcfg2.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg2);
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	if (!usbcfg.b.physel && usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 3)
++		clock = 48;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 30;
++	if (!usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && !usbcfg.b.phyif)
++		clock = 60;
++	if (usbcfg.b.phylpwrclksel && !usbcfg.b.physel &&
++	    !usbcfg.b.ulpi_utmi_sel && usbcfg.b.phyif)
++		clock = 48;
++	if (usbcfg.b.physel && !usbcfg.b.phyif && hwcfg2.b.fs_phy_type == 2)
++		clock = 48;
++	if (usbcfg.b.physel && hwcfg2.b.fs_phy_type == 1)
++		clock = 48;
++	if (hprt0.b.prtspd == 0)
++		/* High speed case */
++		return 125 * clock;
++	else
++		/* FS/LS case */
++		return 1000 * clock;
++}
++
++/**
++ * This function reads a setup packet from the Rx FIFO into the destination
++ * buffer. This function is called from the Rx Status Queue Level (RxStsQLvl)
++ * Interrupt routine when a SETUP packet has been received in Slave mode.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest Destination buffer for packet data.
++ */
++void dwc_otg_read_setup_packet(dwc_otg_core_if_t * core_if, uint32_t * dest)
++{
++	device_grxsts_data_t status;
++	/* Get the 8 bytes of a setup transaction data */
++
++	/* Pop 2 DWORDS off the receive data FIFO into memory */
++	dest[0] = DWC_READ_REG32(core_if->data_fifo[0]);
++	dest[1] = DWC_READ_REG32(core_if->data_fifo[0]);
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxstsp);
++		DWC_DEBUGPL(DBG_ANY,
++			    "EP:%d BCnt:%d " "pktsts:%x Frame:%d(0x%0x)\n",
++			    status.b.epnum, status.b.bcnt, status.b.pktsts,
++			    status.b.fn, status.b.fn);
++	}
++}
++
++/**
++ * This function enables EP0 OUT to receive SETUP packets and configures EP0
++ * IN for transmitting packets. It is normally called when the
++ * "Enumeration Done" interrupt occurs.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dsts_data_t dsts;
++	depctl_data_t diepctl;
++	depctl_data_t doepctl;
++	dctl_data_t dctl = {.d32 = 0 };
++
++	ep->stp_rollover = 0;
++	/* Read the Device Status and Endpoint 0 Control registers */
++	dsts.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dsts);
++	diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++	doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++
++	/* Set the MPS of the IN EP based on the enumeration speed */
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_64;
++		break;
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		diepctl.b.mps = DWC_DEP0CTL_MPS_8;
++		break;
++	}
++
++	DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++	/* Enable OUT EP for receive */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.epena = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++	dctl.b.cgnpinnak = 1;
++
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++	DWC_DEBUGPL(DBG_PCDV, "dctl=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->dctl));
++
++}
++
++/**
++ * This function activates an EP.  The Device EP control register for
++ * the EP is configured as defined in the ep structure. Note: This
++ * function is not used for EP0.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to activate.
++ */
++void dwc_otg_ep_activate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t depctl;
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() EP%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	/* If the EP is already active don't change the EP Control
++	 * register. */
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (!depctl.b.usbactep) {
++		depctl.b.mps = ep->maxpacket;
++		depctl.b.eptype = ep->type;
++		depctl.b.txfnum = ep->tx_fifo_num;
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			depctl.b.setd0pid = 1;	// ???
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++		depctl.b.usbactep = 1;
++
++		/* Update nextep_seq array and EPMSCNT in DCFG*/
++		if (!(depctl.b.eptype & 1) && (ep->is_in == 1)) {	// NP IN EP
++			for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++				if (core_if->nextep_seq[i] == core_if->first_in_nextep_seq)
++				break;
++			}
++			core_if->nextep_seq[i] = ep->num;
++			core_if->nextep_seq[ep->num] = core_if->first_in_nextep_seq;
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++			dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++			dcfg.b.epmscnt++;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n",
++					    core_if->nextep_seq[i]);
++			}
++
++		}
++
++
++		DWC_WRITE_REG32(addr, depctl.d32);
++		DWC_DEBUGPL(DBG_PCDV, "DEPCTL=%08x\n", DWC_READ_REG32(addr));
++	}
++
++	/* Enable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		if (ep->is_in == 1) {
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.xfercompl = 1;
++			diepmsk.b.timeout = 1;
++			diepmsk.b.epdisabled = 1;
++			diepmsk.b.ahberr = 1;
++			diepmsk.b.intknepmis = 1;
++			if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++				diepmsk.b.intknepmis = 0;
++			diepmsk.b.txfifoundrn = 1;	//?????
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++				diepmsk.b.nak = 1;
++			}
++
++
++
++/*
++			if (core_if->dma_desc_enable) {
++				diepmsk.b.bna = 1;
++			}
++*/
++/*
++			if (core_if->dma_enable) {
++				doepmsk.b.nak = 1;
++			}
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], diepmsk.d32);
++
++		} else {
++			doepmsk_data_t doepmsk = {.d32 = 0 };
++			doepmsk.b.xfercompl = 1;
++			doepmsk.b.ahberr = 1;
++			doepmsk.b.epdisabled = 1;
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC)
++				doepmsk.b.outtknepdis = 1;
++
++/*
++
++			if (core_if->dma_desc_enable) {
++				doepmsk.b.bna = 1;
++			}
++*/
++/*
++			doepmsk.b.babble = 1;
++			doepmsk.b.nyet = 1;
++			doepmsk.b.nak = 1;
++*/
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], doepmsk.d32);
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->deachintmsk,
++				 0, daintmsk.d32);
++	} else {
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (ep->is_in) {
++				diepmsk_data_t diepmsk = {.d32 = 0 };
++				diepmsk.b.nak = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->diepmsk, 0, diepmsk.d32);
++			} else {
++				doepmsk_data_t doepmsk = {.d32 = 0 };
++				doepmsk.b.outtknepdis = 1;
++				DWC_MODIFY_REG32(&dev_if->dev_global_regs->doepmsk, 0, doepmsk.d32);
++			}
++		}
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->daintmsk,
++				 0, daintmsk.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "DAINTMSK=%0x\n",
++		    DWC_READ_REG32(&dev_if->dev_global_regs->daintmsk));
++
++	ep->stall_clear_flag = 0;
++
++	return;
++}
++
++/**
++ * This function deactivates an EP. This is done by clearing the USB Active
++ * EP bit in the Device EP control register. Note: This function is not used
++ * for EP0. EP0 cannot be deactivated.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to deactivate.
++ */
++void dwc_otg_ep_deactivate(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	daint_data_t daintmsk = {.d32 = 0 };
++	dcfg_data_t dcfg;
++	uint8_t i = 0;
++
++#ifdef DWC_UTE_PER_IO
++	ep->xiso_frame_num = 0xFFFFFFFF;
++	ep->xiso_active_xfers = 0;
++	ep->xiso_queued_xfers = 0;
++#endif
++
++	/* Read DEPCTLn register */
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++		daintmsk.ep.in = 1 << ep->num;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++		daintmsk.ep.out = 1 << ep->num;
++	}
++
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.usbactep = 0;
++
++	/* Update nextep_seq array and EPMSCNT in DCFG*/
++	if (!(depctl.b.eptype & 1) && ep->is_in == 1) {	// NP EP IN
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			if (core_if->nextep_seq[i] == ep->num)
++			break;
++		}
++		core_if->nextep_seq[i] = core_if->nextep_seq[ep->num];
++		if (core_if->first_in_nextep_seq == ep->num)
++			core_if->first_in_nextep_seq = i;
++		core_if->nextep_seq[ep->num] = 0xff;
++		depctl.b.nextep = 0;
++		dcfg.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt--;
++		DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++				dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++				__func__, core_if->first_in_nextep_seq);
++			for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++				DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++			}
++	}
++
++	if (ep->is_in == 1)
++		depctl.b.txfnum = 0;
++
++	if (core_if->dma_desc_enable)
++		depctl.b.epdis = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++	if (core_if->dma_enable && ep->type == DWC_OTG_EP_TYPE_ISOC
++	    && depctl.b.epena) {
++		depctl_data_t depctl = {.d32 = 0};
++		if (ep->is_in) {
++			diepint_data_t diepint = {.d32 = 0};
++
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.inepnakeff);
++			diepint.b.inepnakeff = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepctl, depctl.d32);
++			do {
++				dwc_udelay(10);
++				diepint.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[ep->num]->
++						   diepint);
++			} while (!diepint.b.epdisabled);
++			diepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					diepint, diepint.d32);
++		} else {
++			dctl_data_t dctl = {.d32 = 0};
++			gintmsk_data_t gintsts = {.d32 = 0};
++			doepint_data_t doepint = {.d32 = 0};
++			dctl.b.sgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			do {
++				dwc_udelay(10);
++				gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++			} while (!gintsts.b.goutnakeff);
++			gintsts.d32 = 0;
++			gintsts.b.goutnakeff = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++			depctl.d32 = 0;
++			depctl.b.epdis = 1;
++			depctl.b.snak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepctl, depctl.d32);
++			do
++			{
++				dwc_udelay(10);
++				doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++											out_ep_regs[ep->num]->doepint);
++			} while (!doepint.b.epdisabled);
++
++			doepint.b.epdisabled = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->doepint, doepint.d32);
++
++			dctl.d32 = 0;
++			dctl.b.cgoutnak = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		}
++	}
++
++	/* Disable the Interrupt for this EP */
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->deachintmsk,
++				 daintmsk.d32, 0);
++
++		if (ep->is_in == 1) {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					diepeachintmsk[ep->num], 0);
++		} else {
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->
++					doepeachintmsk[ep->num], 0);
++		}
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->daintmsk,
++				 daintmsk.d32, 0);
++	}
++
++}
++
++/**
++ * This function initializes dma descriptor chain.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++static void init_dma_desc_chain(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t offset;
++	uint32_t xfer_est;
++	int i;
++	unsigned maxxfer_local, total_len;
++
++	if (!ep->is_in && ep->type == DWC_OTG_EP_TYPE_INTR &&
++					(ep->maxpacket%4)) {
++		maxxfer_local = ep->maxpacket;
++		total_len = ep->xfer_len;
++	} else {
++		maxxfer_local = ep->maxxfer;
++		total_len = ep->total_len;
++	}
++
++	ep->desc_cnt = (total_len / maxxfer_local) +
++            ((total_len % maxxfer_local) ? 1 : 0);
++
++	if (!ep->desc_cnt)
++		ep->desc_cnt = 1;
++
++	if (ep->desc_cnt > MAX_DMA_DESC_CNT)
++		ep->desc_cnt = MAX_DMA_DESC_CNT;
++
++	dma_desc = ep->desc_addr;
++	if (maxxfer_local == ep->maxpacket) {
++		if ((total_len % maxxfer_local) &&
++				(total_len/maxxfer_local < MAX_DMA_DESC_CNT)) {
++			xfer_est = (ep->desc_cnt - 1) * maxxfer_local +
++					(total_len % maxxfer_local);
++		} else
++			xfer_est = ep->desc_cnt * maxxfer_local;
++	} else
++		xfer_est = total_len;
++	offset = 0;
++	for (i = 0; i < ep->desc_cnt; ++i) {
++		/** DMA Descriptor Setup */
++		if (xfer_est > maxxfer_local) {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 0;
++			dma_desc->status.b.ioc = 0;
++			dma_desc->status.b.sp = 0;
++			dma_desc->status.b.bytes = maxxfer_local;
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			xfer_est -= maxxfer_local;
++			offset += maxxfer_local;
++		} else {
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			if (ep->is_in) {
++				dma_desc->status.b.sp =
++				    (xfer_est %
++				     ep->maxpacket) ? 1 : ((ep->
++							    sent_zlp) ? 1 : 0);
++				dma_desc->status.b.bytes = xfer_est;
++			} else {
++				if (maxxfer_local == ep->maxpacket)
++					dma_desc->status.b.bytes = xfer_est;
++				else
++					dma_desc->status.b.bytes =
++						xfer_est + ((4 - (xfer_est & 0x3)) & 0x3);
++			}
++
++			dma_desc->buf = ep->dma_addr + offset;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++		}
++		dma_desc++;
++	}
++}
++/**
++ * This function is called when to write ISOC data into appropriate dedicated
++ * periodic FIFO.
++ */
++static int32_t write_isoc_tx_fifo(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	int epnum = dwc_ep->num;
++	int dwords;
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++
++	if (len > dwc_ep->maxpacket) {
++		len = dwc_ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       dwc_ep->xfer_count < dwc_ep->xfer_len && dwc_ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, dwc_ep, 0);
++
++		len = dwc_ep->xfer_len - dwc_ep->xfer_count;
++		if (len > dwc_ep->maxpacket) {
++			len = dwc_ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.  the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p, total_len = %d\n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff,
++		    ep->total_len);
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		gnptxsts_data_t gtxstatus;
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0 && !core_if->dma_enable) {
++#ifdef DEBUG
++			DWC_PRINTF("TX Queue Full (0x%0x)\n", gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++			ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++		else
++			ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len - ep->xfer_len)) ?
++				 MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++
++
++		/* Zero Length Packet? */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count - 1 +
++			     ep->maxpacket) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++				deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++			}
++			if (ep->type == DWC_OTG_EP_TYPE_ISOC)
++				deptsiz.b.mc = deptsiz.b.pktcnt;
++		}
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (ep->type != DWC_OTG_EP_TYPE_ISOC)
++					deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					init_dma_desc_chain(core_if, ep);
++				/** DIEPDMAn Register write */
++					DWC_WRITE_REG32(&in_regs->diepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			if (ep->type != DWC_OTG_EP_TYPE_ISOC) {
++				/**
++				 * Enable the Non-Periodic Tx FIFO empty interrupt,
++				 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++				 * the data will be written into the fifo by the ISR.
++				 */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, intr_mask.d32);
++				} else {
++					/* Enable the Tx FIFO Empty Interrupt for this EP */
++					if (ep->xfer_len > 0) {
++						uint32_t fifoemptymsk = 0;
++						fifoemptymsk = 1 << ep->num;
++						DWC_MODIFY_REG32
++						    (&core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++						     0, fifoemptymsk);
++
++					}
++				}
++			}  else {
++					 write_isoc_tx_fifo(core_if, ep);
++			}
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else
++					ep->frm_overrun = 0;
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		if (!core_if->dma_desc_enable) {
++			if (ep->maxpacket > ep->maxxfer / MAX_PKT_CNT)
++				ep->xfer_len += (ep->maxxfer < (ep->total_len - ep->xfer_len)) ?
++				ep->maxxfer : (ep->total_len - ep->xfer_len);
++                else
++					ep->xfer_len += (MAX_PKT_CNT * ep->maxpacket < (ep->total_len
++					- ep->xfer_len)) ? MAX_PKT_CNT * ep->maxpacket : (ep->total_len - ep->xfer_len);
++		}
++
++		/* Program the transfer size and packet count as follows:
++		 *
++		 *      pktcnt = N
++		 *      xfersize = N * maxpacket
++		 */
++		if ((ep->xfer_len - ep->xfer_count) == 0) {
++			/* Zero Length Packet */
++			deptsiz.b.xfersize = ep->maxpacket;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - ep->xfer_count +
++			     (ep->maxpacket - 1)) / ep->maxpacket;
++			if (deptsiz.b.pktcnt > MAX_PKT_CNT) {
++				deptsiz.b.pktcnt = MAX_PKT_CNT;
++			}
++			if (!core_if->dma_desc_enable) {
++				ep->xfer_len =
++					deptsiz.b.pktcnt * ep->maxpacket + ep->xfer_count;
++			}
++			deptsiz.b.xfersize = ep->xfer_len - ep->xfer_count;
++		}
++
++		DWC_DEBUGPL(DBG_PCDV, "ep%d xfersize=%d pktcnt=%d\n",
++			    ep->num, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++#ifdef DWC_UTE_CFI
++				/* The descriptor chain should be already initialized by now */
++				if (ep->buff_mode != BM_STANDARD) {
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->descs_dma_addr);
++				} else {
++#endif
++					/** This is used for interrupt out transfers*/
++					if (!ep->xfer_len)
++						ep->xfer_len = ep->total_len;
++					init_dma_desc_chain(core_if, ep);
++
++					if (core_if->core_params->dev_out_nak) {
++						if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++							deptsiz.b.pktcnt = (ep->total_len +
++								(ep->maxpacket - 1)) / ep->maxpacket;
++							deptsiz.b.xfersize = ep->total_len;
++							/* Remember initial value of doeptsiz */
++							core_if->start_doeptsiz_val[ep->num] = deptsiz.d32;
++							DWC_WRITE_REG32(&out_regs->doeptsiz,
++								deptsiz.d32);
++						}
++					}
++				/** DOEPDMAn Register write */
++					DWC_WRITE_REG32(&out_regs->doepdma,
++							ep->dma_desc_addr);
++#ifdef DWC_UTE_CFI
++				}
++#endif
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		if (ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			dsts_data_t dsts = {.d32 = 0};
++			if (ep->bInterval == 1) {
++				dsts.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   dev_global_regs->dsts);
++				ep->frame_num = dsts.b.soffn + ep->bInterval;
++				if (ep->frame_num > 0x3FFF) {
++					ep->frm_overrun = 1;
++					ep->frame_num &= 0x3FFF;
++				} else
++					ep->frm_overrun = 0;
++
++				if (ep->frame_num & 0x1) {
++					depctl.b.setd1pid = 1;
++				} else {
++					depctl.b.setd0pid = 1;
++				}
++			}
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++		DWC_DEBUGPL(DBG_PCD, "DOEPCTL=%08x DOEPTSIZ=%08x\n",
++			    DWC_READ_REG32(&out_regs->doepctl),
++			    DWC_READ_REG32(&out_regs->doeptsiz));
++		DWC_DEBUGPL(DBG_PCD, "DAINTMSK=%08x GINTMSK=%08x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   daintmsk),
++			    DWC_READ_REG32(&core_if->core_global_regs->
++					   gintmsk));
++
++		/* Timer is scheduling only for out bulk transfers for
++		 * "Device DDMA OUT NAK Enhancement" feature to inform user
++		 * about received data payload in case of timeout
++		 */
++		if (core_if->core_params->dev_out_nak) {
++			if (ep->type == DWC_OTG_EP_TYPE_BULK) {
++				core_if->ep_xfer_info[ep->num].core_if = core_if;
++				core_if->ep_xfer_info[ep->num].ep = ep;
++				core_if->ep_xfer_info[ep->num].state = 1;
++
++				/* Start a timer for this transfer. */
++				DWC_TIMER_SCHEDULE(core_if->ep_xfer_timer[ep->num], 10000);
++			}
++		}
++	}
++}
++
++/**
++ * This function setup a zero length transfer in Buffer DMA and
++ * Slave modes for usb requests with zero field set
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++
++	depctl_data_t depctl;
++	deptsiz_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s()\n", __func__);
++	DWC_PRINTF("zero length transfer is called\n");
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(in_regs->diepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(in_regs->dieptsiz));
++
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 1;
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.b.mc = 1;
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++			/**
++			 * Enable the Non-Periodic Tx FIFO empty interrupt,
++			 * or the Tx FIFO epmty interrupt in dedicated Tx FIFO mode,
++			 * the data will be written into the fifo by the ISR.
++			 */
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk = 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[ep->num];
++
++		depctl.d32 = DWC_READ_REG32(&(out_regs->doepctl));
++		deptsiz.d32 = DWC_READ_REG32(&(out_regs->doeptsiz));
++
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for EP0 and starts
++ * the transfer.  For an IN transfer, the packets will be loaded into
++ * the appropriate Tx FIFO in the ISR. For OUT transfers, the packets are
++ * unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	DWC_DEBUGPL(DBG_PCD, "ep%d-%s xfer_len=%d xfer_cnt=%d "
++		    "xfer_buff=%p start_xfer_buff=%p \n",
++		    ep->num, (ep->is_in ? "IN" : "OUT"), ep->xfer_len,
++		    ep->xfer_count, ep->xfer_buff, ep->start_xfer_buff);
++
++	ep->total_len = ep->xfer_len;
++
++	/* IN endpoint */
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++
++		gnptxsts_data_t gtxstatus;
++
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++			if (depctl.b.epena)
++				return;
++		}
++
++		gtxstatus.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++
++		/* If dedicated FIFO every time flush fifo before enable ep*/
++		if (core_if->en_multiple_tx_fifo && core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_otg_flush_tx_fifo(core_if, ep->tx_fifo_num);
++
++		if (core_if->en_multiple_tx_fifo == 0
++		    && gtxstatus.b.nptxqspcavail == 0
++		    && !core_if->dma_enable) {
++#ifdef DEBUG
++			deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++			DWC_DEBUGPL(DBG_PCD, "DIEPCTL0=%0x\n",
++				    DWC_READ_REG32(&in_regs->diepctl));
++			DWC_DEBUGPL(DBG_PCD, "DIEPTSIZ0=%0x (sz=%d, pcnt=%d)\n",
++				    deptsiz.d32,
++				    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			DWC_PRINTF("TX Queue or FIFO Full (0x%0x)\n",
++				   gtxstatus.d32);
++#endif
++			return;
++		}
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Zero Length Packet? */
++		if (ep->xfer_len == 0) {
++			deptsiz.b.xfersize = 0;
++			deptsiz.b.pktcnt = 1;
++		} else {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			if (ep->xfer_len > ep->maxpacket) {
++				ep->xfer_len = ep->maxpacket;
++				deptsiz.b.xfersize = ep->maxpacket;
++			} else {
++				deptsiz.b.xfersize = ep->xfer_len;
++			}
++			deptsiz.b.pktcnt = 1;
++
++		}
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				DWC_WRITE_REG32(&in_regs->dieptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->in_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.sp =
++				    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++				dma_desc->status.b.bytes = ep->xfer_len;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DIEPDMA0 Register write */
++				DWC_WRITE_REG32(&in_regs->diepdma,
++						core_if->
++						dev_if->dma_in_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		}
++
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		/* OUT endpoint */
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count as follows:
++		 *      xfersize = N * (maxpacket + 4 - (maxpacket % 4))
++		 *      pktcnt = N                                                                                      */
++		/* Zero Length Packet */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			deptsiz.b.supcnt = 3;
++
++		DWC_DEBUGPL(DBG_PCDV, "len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt);
++
++		if (core_if->dma_enable) {
++			if (!core_if->dma_desc_enable) {
++				DWC_WRITE_REG32(&out_regs->doeptsiz,
++						deptsiz.d32);
++
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++			} else {
++				dma_desc = core_if->dev_if->out_desc_addr;
++
++				/** DMA Descriptor Setup */
++				dma_desc->status.b.bs = BS_HOST_BUSY;
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++					dma_desc->status.b.mtrf = 0;
++					dma_desc->status.b.sr = 0;
++				}
++				dma_desc->status.b.l = 1;
++				dma_desc->status.b.ioc = 1;
++				dma_desc->status.b.bytes = ep->maxpacket;
++				dma_desc->buf = ep->dma_addr;
++				dma_desc->status.b.sts = 0;
++				dma_desc->status.b.bs = BS_HOST_READY;
++
++				/** DOEPDMA0 Register write */
++				DWC_WRITE_REG32(&out_regs->doepdma,
++						core_if->dev_if->
++						dma_out_desc_addr);
++			}
++		} else {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		}
++
++		/* EP enable */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&(out_regs->doepctl), depctl.d32);
++	}
++}
++
++/**
++ * This function continues control IN transfers started by
++ * dwc_otg_ep0_start_transfer, when the transfer does not fit in a
++ * single packet.  NOTE: The DIEPCTL0/DOEPCTL0 registers only have one
++ * bit for the packet count.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP0 data.
++ */
++void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	deptsiz0_data_t deptsiz;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++
++	if (ep->is_in == 1) {
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[0];
++		gnptxsts_data_t tx_status = {.d32 = 0 };
++
++		tx_status.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gnptxsts);
++		/** @todo Should there be check for room in the Tx
++		 * Status Queue.  If not remove the code above this comment. */
++
++		depctl.d32 = DWC_READ_REG32(&in_regs->diepctl);
++		deptsiz.d32 = DWC_READ_REG32(&in_regs->dieptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++
++		if (core_if->dma_desc_enable == 0) {
++			deptsiz.b.xfersize =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++			deptsiz.b.pktcnt = 1;
++			if (core_if->dma_enable == 0) {
++				ep->xfer_len += deptsiz.b.xfersize;
++			} else {
++				ep->xfer_len = deptsiz.b.xfersize;
++			}
++			DWC_WRITE_REG32(&in_regs->dieptsiz, deptsiz.d32);
++		} else {
++			ep->xfer_len =
++			    (ep->total_len - ep->xfer_count) >
++			    ep->maxpacket ? ep->maxpacket : (ep->total_len -
++							     ep->xfer_count);
++
++			dma_desc = core_if->dev_if->in_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.sp =
++			    (ep->xfer_len == ep->maxpacket) ? 0 : 1;
++			dma_desc->status.b.bytes = ep->xfer_len;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DIEPDMA0 Register write */
++			DWC_WRITE_REG32(&in_regs->diepdma,
++					core_if->dev_if->dma_in_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(in_regs->diepdma),
++						(uint32_t) ep->dma_addr);
++		}
++		if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable)
++			depctl.b.nextep = core_if->nextep_seq[ep->num];
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&in_regs->diepctl, depctl.d32);
++
++		/**
++		 * Enable the Non-Periodic Tx FIFO empty interrupt, the
++		 * data will be written into the fifo by the ISR.
++		 */
++		if (!core_if->dma_enable) {
++			if (core_if->en_multiple_tx_fifo == 0) {
++				/* First clear it from GINTSTS */
++				intr_mask.b.nptxfempty = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gintmsk,
++						 intr_mask.d32, intr_mask.d32);
++
++			} else {
++				/* Enable the Tx FIFO Empty Interrupt for this EP */
++				if (ep->xfer_len > 0) {
++					uint32_t fifoemptymsk = 0;
++					fifoemptymsk |= 1 << ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 0, fifoemptymsk);
++				}
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[0];
++
++		depctl.d32 = DWC_READ_REG32(&out_regs->doepctl);
++		deptsiz.d32 = DWC_READ_REG32(&out_regs->doeptsiz);
++
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->maxpacket;
++		deptsiz.b.pktcnt = 1;
++
++		if (core_if->dma_desc_enable == 0) {
++			DWC_WRITE_REG32(&out_regs->doeptsiz, deptsiz.d32);
++		} else {
++			dma_desc = core_if->dev_if->out_desc_addr;
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = ep->maxpacket;
++			dma_desc->buf = ep->dma_addr;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&out_regs->doepdma,
++					core_if->dev_if->dma_out_desc_addr);
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "IN len=%d  xfersize=%d pktcnt=%d [%08x]\n",
++			    ep->xfer_len, deptsiz.b.xfersize, deptsiz.b.pktcnt,
++			    deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->hwcfg2.b.architecture == DWC_INT_DMA_ARCH) {
++			if (core_if->dma_desc_enable == 0)
++				DWC_WRITE_REG32(&(out_regs->doepdma),
++						(uint32_t) ep->dma_addr);
++
++		}
++
++		/* EP enable, IN data in FIFO */
++		depctl.b.cnak = 1;
++		depctl.b.epena = 1;
++		DWC_WRITE_REG32(&out_regs->doepctl, depctl.d32);
++
++	}
++}
++
++#ifdef DEBUG
++void dump_msg(const u8 * buf, unsigned int length)
++{
++	unsigned int start, num, i;
++	char line[52], *p;
++
++	if (length >= 512)
++		return;
++	start = 0;
++	while (length > 0) {
++		num = length < 16u ? length : 16u;
++		p = line;
++		for (i = 0; i < num; ++i) {
++			if (i == 8)
++				*p++ = ' ';
++			DWC_SPRINTF(p, " %02x", buf[i]);
++			p += 3;
++		}
++		*p = 0;
++		DWC_PRINTF("%6x: %s\n", start, line);
++		buf += num;
++		start += num;
++		length -= num;
++	}
++}
++#else
++static inline void dump_msg(const u8 * buf, unsigned int length)
++{
++}
++#endif
++
++/**
++ * This function writes a packet into the Tx FIFO associated with the
++ * EP. For non-periodic EPs the non-periodic Tx FIFO is written.  For
++ * periodic EPs the periodic Tx FIFO associated with the EP is written
++ * with all packets for the next micro-frame.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to write packet for.
++ * @param dma Indicates if DMA is being used.
++ */
++void dwc_otg_ep_write_packet(dwc_otg_core_if_t * core_if, dwc_ep_t * ep,
++			     int dma)
++{
++	/**
++	 * The buffer is padded to DWORD on a per packet basis in
++	 * slave/dma mode if the MPS is not DWORD aligned. The last
++	 * packet, if short, is also padded to a multiple of DWORD.
++	 *
++	 * ep->xfer_buff always starts DWORD aligned in memory and is a
++	 * multiple of DWORD in length
++	 *
++	 * ep->xfer_len can be any number of bytes
++	 *
++	 * ep->xfer_count is a multiple of ep->maxpacket until the last
++	 *	packet
++	 *
++	 * FIFO access is DWORD */
++
++	uint32_t i;
++	uint32_t byte_count;
++	uint32_t dword_count;
++	uint32_t *fifo;
++	uint32_t *data_buff = (uint32_t *) ep->xfer_buff;
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p)\n", __func__, core_if,
++		    ep);
++	if (ep->xfer_count >= ep->xfer_len) {
++		DWC_WARN("%s() No data for EP%d!!!\n", __func__, ep->num);
++		return;
++	}
++
++	/* Find the byte length of the packet either short packet or MPS */
++	if ((ep->xfer_len - ep->xfer_count) < ep->maxpacket) {
++		byte_count = ep->xfer_len - ep->xfer_count;
++	} else {
++		byte_count = ep->maxpacket;
++	}
++
++	/* Find the DWORD length, padded by extra bytes as neccessary if MPS
++	 * is not a multiple of DWORD */
++	dword_count = (byte_count + 3) / 4;
++
++#ifdef VERBOSE
++	dump_msg(ep->xfer_buff, byte_count);
++#endif
++
++	/**@todo NGS Where are the Periodic Tx FIFO addresses
++	 * intialized?	What should this be? */
++
++	fifo = core_if->data_fifo[ep->num];
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "fifo=%p buff=%p *p=%08x bc=%d\n",
++		    fifo, data_buff, *data_buff, byte_count);
++
++	if (!dma) {
++		for (i = 0; i < dword_count; i++, data_buff++) {
++			DWC_WRITE_REG32(fifo, *data_buff);
++		}
++	}
++
++	ep->xfer_count += byte_count;
++	ep->xfer_buff += byte_count;
++	ep->dma_addr += byte_count;
++}
++
++/**
++ * Set the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to set the stall on.
++ */
++void dwc_otg_ep_set_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the disable and stall bits */
++		if (depctl.b.epena) {
++			depctl.b.epdis = 1;
++		}
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++		depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++		/* set the stall bit */
++		depctl.b.stall = 1;
++		DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++
++	return;
++}
++
++/**
++ * Clear the EP STALL.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to clear stall from.
++ */
++void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl;
++	volatile uint32_t *depctl_addr;
++
++	DWC_DEBUGPL(DBG_PCD, "%s ep%d-%s\n", __func__, ep->num,
++		    (ep->is_in ? "IN" : "OUT"));
++
++	if (ep->is_in == 1) {
++		depctl_addr = &(core_if->dev_if->in_ep_regs[ep->num]->diepctl);
++	} else {
++		depctl_addr = &(core_if->dev_if->out_ep_regs[ep->num]->doepctl);
++	}
++
++	depctl.d32 = DWC_READ_REG32(depctl_addr);
++
++	/* clear the stall bits */
++	depctl.b.stall = 0;
++
++	/*
++	 * USB Spec 9.4.5: For endpoints using data toggle, regardless
++	 * of whether an endpoint has the Halt feature set, a
++	 * ClearFeature(ENDPOINT_HALT) request always results in the
++	 * data toggle being reinitialized to DATA0.
++	 */
++	if (ep->type == DWC_OTG_EP_TYPE_INTR ||
++	    ep->type == DWC_OTG_EP_TYPE_BULK) {
++		depctl.b.setd0pid = 1;	/* DATA0 */
++	}
++
++	DWC_WRITE_REG32(depctl_addr, depctl.d32);
++	DWC_DEBUGPL(DBG_PCD, "DEPCTL=%0x\n", DWC_READ_REG32(depctl_addr));
++	return;
++}
++
++/**
++ * This function reads a packet from the Rx FIFO into the destination
++ * buffer. To read SETUP data use dwc_otg_read_setup_packet.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dest	  Destination buffer for the packet.
++ * @param bytes  Number of bytes to copy to the destination.
++ */
++void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++			 uint8_t * dest, uint16_t bytes)
++{
++	int i;
++	int word_count = (bytes + 3) / 4;
++
++	volatile uint32_t *fifo = core_if->data_fifo[0];
++	uint32_t *data_buff = (uint32_t *) dest;
++
++	/**
++	 * @todo Account for the case where _dest is not dword aligned. This
++	 * requires reading data from the FIFO into a uint32_t temp buffer,
++	 * then moving it into the data buffer.
++	 */
++
++	DWC_DEBUGPL((DBG_PCDV | DBG_CILV), "%s(%p,%p,%d)\n", __func__,
++		    core_if, dest, bytes);
++
++	for (i = 0; i < word_count; i++, data_buff++) {
++		*data_buff = DWC_READ_REG32(fifo);
++	}
++
++	return;
++}
++
++/**
++ * This functions reads the device registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Device Global Registers\n");
++	addr = &core_if->dev_if->dev_global_regs->dcfg;
++	DWC_PRINTF("DCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dctl;
++	DWC_PRINTF("DCTL		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dsts;
++	DWC_PRINTF("DSTS		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->diepmsk;
++	DWC_PRINTF("DIEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->doepmsk;
++	DWC_PRINTF("DOEPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daint;
++	DWC_PRINTF("DAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->daintmsk;
++	DWC_PRINTF("DAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->dev_if->dev_global_regs->dtknqr1;
++	DWC_PRINTF("DTKNQR1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->hwcfg2.b.dev_token_q_depth > 6) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr2;
++		DWC_PRINTF("DTKNQR2	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dvbusdis;
++	DWC_PRINTF("DVBUSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dvbuspulse;
++	DWC_PRINTF("DVBUSPULSE	@0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr3_dthrctl;
++	DWC_PRINTF("DTKNQR3_DTHRCTL	 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.dev_token_q_depth > 22) {
++		addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++		DWC_PRINTF("DTKNQR4	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = &core_if->dev_if->dev_global_regs->dtknqr4_fifoemptymsk;
++	DWC_PRINTF("FIFOEMPMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->hwcfg2.b.multi_proc_int) {
++
++		addr = &core_if->dev_if->dev_global_regs->deachint;
++		DWC_PRINTF("DEACHINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->dev_global_regs->deachintmsk;
++		DWC_PRINTF("DEACHINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++
++		for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->diepeachintmsk[i];
++			DWC_PRINTF("DIEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++
++		for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++			addr =
++			    &core_if->dev_if->
++			    dev_global_regs->doepeachintmsk[i];
++			DWC_PRINTF("DOEPEACHINTMSK[%d]	 @0x%08lX : 0x%08X\n",
++				   i, (unsigned long)addr,
++				   DWC_READ_REG32(addr));
++		}
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_PRINTF("Device IN EP %d Registers\n", i);
++		addr = &core_if->dev_if->in_ep_regs[i]->diepctl;
++		DWC_PRINTF("DIEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepint;
++		DWC_PRINTF("DIEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dieptsiz;
++		DWC_PRINTF("DIETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdma;
++		DWC_PRINTF("DIEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->dtxfsts;
++		DWC_PRINTF("DTXFSTS	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->in_ep_regs[i]->diepdmab;
++		DWC_PRINTF("DIEPDMAB	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, 0 /*DWC_READ_REG32(addr) */ );
++	}
++
++	for (i = 0; i <= core_if->dev_if->num_out_eps; i++) {
++		DWC_PRINTF("Device OUT EP %d Registers\n", i);
++		addr = &core_if->dev_if->out_ep_regs[i]->doepctl;
++		DWC_PRINTF("DOEPCTL	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepint;
++		DWC_PRINTF("DOEPINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doeptsiz;
++		DWC_PRINTF("DOETSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->dev_if->out_ep_regs[i]->doepdma;
++		DWC_PRINTF("DOEPDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_enable) {	/* Don't access this register in SLAVE mode */
++			addr = &core_if->dev_if->out_ep_regs[i]->doepdmab;
++			DWC_PRINTF("DOEPDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++}
++
++/**
++ * This functions reads the SPRAM and prints its content
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_spram(dwc_otg_core_if_t * core_if)
++{
++	volatile uint8_t *addr, *start_addr, *end_addr;
++
++	DWC_PRINTF("SPRAM Data:\n");
++	start_addr = (void *)core_if->core_global_regs;
++	DWC_PRINTF("Base Address: 0x%8lX\n", (unsigned long)start_addr);
++	start_addr += 0x00028000;
++	end_addr = (void *)core_if->core_global_regs;
++	end_addr += 0x000280e0;
++
++	for (addr = start_addr; addr < end_addr; addr += 16) {
++		DWC_PRINTF
++		    ("0x%8lX:\t%2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X %2X\n",
++		     (unsigned long)addr, addr[0], addr[1], addr[2], addr[3],
++		     addr[4], addr[5], addr[6], addr[7], addr[8], addr[9],
++		     addr[10], addr[11], addr[12], addr[13], addr[14], addr[15]
++		    );
++	}
++
++	return;
++}
++
++/**
++ * This function reads the host registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_host_registers(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	volatile uint32_t *addr;
++
++	DWC_PRINTF("Host Global Registers\n");
++	addr = &core_if->host_if->host_global_regs->hcfg;
++	DWC_PRINTF("HCFG		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfir;
++	DWC_PRINTF("HFIR		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hfnum;
++	DWC_PRINTF("HFNUM	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->hptxsts;
++	DWC_PRINTF("HPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haint;
++	DWC_PRINTF("HAINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->host_if->host_global_regs->haintmsk;
++	DWC_PRINTF("HAINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	if (core_if->dma_desc_enable) {
++		addr = &core_if->host_if->host_global_regs->hflbaddr;
++		DWC_PRINTF("HFLBADDR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++
++	addr = core_if->host_if->hprt0;
++	DWC_PRINTF("HPRT0	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	for (i = 0; i < core_if->core_params->host_channels; i++) {
++		DWC_PRINTF("Host Channel %d Specific Registers\n", i);
++		addr = &core_if->host_if->hc_regs[i]->hcchar;
++		DWC_PRINTF("HCCHAR	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcsplt;
++		DWC_PRINTF("HCSPLT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcint;
++		DWC_PRINTF("HCINT	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcintmsk;
++		DWC_PRINTF("HCINTMSK	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hctsiz;
++		DWC_PRINTF("HCTSIZ	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		addr = &core_if->host_if->hc_regs[i]->hcdma;
++		DWC_PRINTF("HCDMA	 @0x%08lX : 0x%08X\n",
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++		if (core_if->dma_desc_enable) {
++			addr = &core_if->host_if->hc_regs[i]->hcdmab;
++			DWC_PRINTF("HCDMAB	 @0x%08lX : 0x%08X\n",
++				   (unsigned long)addr, DWC_READ_REG32(addr));
++		}
++
++	}
++	return;
++}
++
++/**
++ * This function reads the core global registers and prints them
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_dump_global_registers(dwc_otg_core_if_t * core_if)
++{
++	int i, ep_num;
++	volatile uint32_t *addr;
++	char *txfsiz;
++
++	DWC_PRINTF("Core Global Registers\n");
++	addr = &core_if->core_global_regs->gotgctl;
++	DWC_PRINTF("GOTGCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gotgint;
++	DWC_PRINTF("GOTGINT	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gahbcfg;
++	DWC_PRINTF("GAHBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gusbcfg;
++	DWC_PRINTF("GUSBCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grstctl;
++	DWC_PRINTF("GRSTCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintsts;
++	DWC_PRINTF("GINTSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gintmsk;
++	DWC_PRINTF("GINTMSK	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxstsr;
++	DWC_PRINTF("GRXSTSR	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->grxfsiz;
++	DWC_PRINTF("GRXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxfsiz;
++	DWC_PRINTF("GNPTXFSIZ @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gnptxsts;
++	DWC_PRINTF("GNPTXSTS	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gi2cctl;
++	DWC_PRINTF("GI2CCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpvndctl;
++	DWC_PRINTF("GPVNDCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ggpio;
++	DWC_PRINTF("GGPIO	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->guid;
++	DWC_PRINTF("GUID		 @0x%08lX : 0x%08X\n",
++		   (unsigned long)addr, DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gsnpsid;
++	DWC_PRINTF("GSNPSID	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg1;
++	DWC_PRINTF("GHWCFG1	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg2;
++	DWC_PRINTF("GHWCFG2	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg3;
++	DWC_PRINTF("GHWCFG3	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->ghwcfg4;
++	DWC_PRINTF("GHWCFG4	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->glpmcfg;
++	DWC_PRINTF("GLPMCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gpwrdn;
++	DWC_PRINTF("GPWRDN	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->gdfifocfg;
++	DWC_PRINTF("GDFIFOCFG	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++	addr = &core_if->core_global_regs->adpctl;
++	DWC_PRINTF("ADPCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   dwc_otg_adp_read_reg(core_if));
++	addr = &core_if->core_global_regs->hptxfsiz;
++	DWC_PRINTF("HPTXFSIZ	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++
++	if (core_if->en_multiple_tx_fifo == 0) {
++		ep_num = core_if->hwcfg4.b.num_dev_perio_in_ep;
++		txfsiz = "DPTXFSIZ";
++	} else {
++		ep_num = core_if->hwcfg4.b.num_in_eps;
++		txfsiz = "DIENPTXF";
++	}
++	for (i = 0; i < ep_num; i++) {
++		addr = &core_if->core_global_regs->dtxfsiz[i];
++		DWC_PRINTF("%s[%d] @0x%08lX : 0x%08X\n", txfsiz, i + 1,
++			   (unsigned long)addr, DWC_READ_REG32(addr));
++	}
++	addr = core_if->pcgcctl;
++	DWC_PRINTF("PCGCCTL	 @0x%08lX : 0x%08X\n", (unsigned long)addr,
++		   DWC_READ_REG32(addr));
++}
++
++/**
++ * Flush a Tx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param num Tx FIFO to flush.
++ */
++void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * core_if, const int num)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "Flush Tx FIFO %d\n", num);
++
++	greset.b.txfflsh = 1;
++	greset.b.txfnum = num;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x GNPTXSTS=0x%08x\n",
++				 __func__, greset.d32,
++				 DWC_READ_REG32(&global_regs->gnptxsts));
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.txfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Flush Rx FIFO.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL((DBG_CIL | DBG_PCDV), "%s\n", __func__);
++	/*
++	 *
++	 */
++	greset.b.rxfflsh = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	} while (greset.b.rxfflsh == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_udelay(1);
++}
++
++/**
++ * Do core a soft reset of the core.  Be careful with this because it
++ * resets all the internal state machines of the core.
++ */
++void dwc_otg_core_reset(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	volatile grstctl_t greset = {.d32 = 0 };
++	int count = 0;
++
++	DWC_DEBUGPL(DBG_CILV, "%s\n", __func__);
++	/* Wait for AHB master IDLE state. */
++	do {
++		dwc_udelay(10);
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 100000) {
++			DWC_WARN("%s() HANG! AHB Idle GRSTCTL=%0x\n", __func__,
++				 greset.d32);
++			return;
++		}
++	}
++	while (greset.b.ahbidle == 0);
++
++	/* Core Soft Reset */
++	count = 0;
++	greset.b.csftrst = 1;
++	DWC_WRITE_REG32(&global_regs->grstctl, greset.d32);
++	do {
++		greset.d32 = DWC_READ_REG32(&global_regs->grstctl);
++		if (++count > 10000) {
++			DWC_WARN("%s() HANG! Soft Reset GRSTCTL=%0x\n",
++				 __func__, greset.d32);
++			break;
++		}
++		dwc_udelay(1);
++	}
++	while (greset.b.csftrst == 1);
++
++	/* Wait for 3 PHY Clocks */
++	dwc_mdelay(100);
++}
++
++uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) != DWC_HOST_MODE);
++}
++
++uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (dwc_otg_mode(_core_if) == DWC_HOST_MODE);
++}
++
++/**
++ * Register HCD callbacks. The callbacks are used to start and stop
++ * the HCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the HCD callback structure.
++ * @param p pointer to be passed to callback function (usb_hcd*).
++ */
++void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->hcd_cb = cb;
++	cb->p = p;
++}
++
++/**
++ * Register PCD callbacks. The callbacks are used to start and stop
++ * the PCD for interrupt processing.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param cb the PCD callback structure.
++ * @param p pointer to be passed to callback function (pcd*).
++ */
++void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * core_if,
++					dwc_otg_cil_callbacks_t * cb, void *p)
++{
++	core_if->pcd_cb = cb;
++	cb->p = p;
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function writes isoc data per 1 (micro)frame into tx fifo
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void write_isoc_frame_data(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	uint32_t len = 0;
++	uint32_t dwords;
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++
++	ep_regs = core_if->dev_if->in_ep_regs[ep->num];
++
++	len = ep->xfer_len - ep->xfer_count;
++
++	if (len > ep->maxpacket) {
++		len = ep->maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", ep->num, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->xfer_count < ep->xfer_len && ep->xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, ep, 0);
++
++		len = ep->xfer_len - ep->xfer_count;
++		if (len > ep->maxpacket) {
++			len = ep->maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", ep->num,
++			    txstatus.d32);
++	}
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	ep->xfer_len = ep->data_per_frame;
++	ep->xfer_count = 0;
++	ep->xfer_buff = ep->cur_pkt_addr;
++	ep->dma_addr = ep->cur_pkt_dma_addr;
++
++	if (ep->is_in) {
++		/* Program the transfer size and packet count
++		 *      as follows: xfersize = N * maxpacket +
++		 *      short_packet pktcnt = N + (short_packet
++		 *      exist ? 1 : 0)
++		 */
++		deptsiz.b.xfersize = ep->xfer_len;
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		deptsiz.b.mc = deptsiz.b.pktcnt;
++		DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->dieptsiz,
++				deptsiz.d32);
++
++		/* Write the DMA register */
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++		}
++	} else {
++		deptsiz.b.pktcnt =
++		    (ep->xfer_len + (ep->maxpacket - 1)) / ep->maxpacket;
++		deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[ep->num]->doeptsiz, deptsiz.d32);
++
++		if (core_if->dma_enable) {
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->
++					 out_ep_regs[ep->num]->doepdma),
++					(uint32_t) ep->dma_addr);
++		}
++	}
++
++	/** Enable endpoint, clear nak  */
++
++	depctl.d32 = 0;
++	if (ep->bInterval == 1) {
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		ep->next_frame = dsts.b.soffn + ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	} else {
++		ep->next_frame += ep->bInterval;
++
++		if (ep->next_frame & 0x1) {
++			depctl.b.setd1pid = 1;
++		} else {
++			depctl.b.setd0pid = 1;
++		}
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	if (ep->is_in && core_if->dma_enable == 0) {
++		write_isoc_frame_data(core_if, ep);
++	}
++
++}
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_set_uninitialized(int32_t * p, int size)
++{
++	int i;
++	for (i = 0; i < size; i++) {
++		p[i] = -1;
++	}
++}
++
++static int dwc_otg_param_initialized(int32_t val)
++{
++	return val != -1;
++}
++
++static int dwc_otg_setup_params(dwc_otg_core_if_t * core_if)
++{
++	int i;
++	core_if->core_params = DWC_ALLOC(sizeof(*core_if->core_params));
++	if (!core_if->core_params) {
++		return -DWC_E_NO_MEMORY;
++	}
++	dwc_otg_set_uninitialized((int32_t *) core_if->core_params,
++				  sizeof(*core_if->core_params) /
++				  sizeof(int32_t));
++	DWC_PRINTF("Setting default values for core params\n");
++	dwc_otg_set_param_otg_cap(core_if, dwc_param_otg_cap_default);
++	dwc_otg_set_param_dma_enable(core_if, dwc_param_dma_enable_default);
++	dwc_otg_set_param_dma_desc_enable(core_if,
++					  dwc_param_dma_desc_enable_default);
++	dwc_otg_set_param_opt(core_if, dwc_param_opt_default);
++	dwc_otg_set_param_dma_burst_size(core_if,
++					 dwc_param_dma_burst_size_default);
++	dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++						       dwc_param_host_support_fs_ls_low_power_default);
++	dwc_otg_set_param_enable_dynamic_fifo(core_if,
++					      dwc_param_enable_dynamic_fifo_default);
++	dwc_otg_set_param_data_fifo_size(core_if,
++					 dwc_param_data_fifo_size_default);
++	dwc_otg_set_param_dev_rx_fifo_size(core_if,
++					   dwc_param_dev_rx_fifo_size_default);
++	dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++						  dwc_param_dev_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_rx_fifo_size(core_if,
++					    dwc_param_host_rx_fifo_size_default);
++	dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++						   dwc_param_host_nperio_tx_fifo_size_default);
++	dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++						  dwc_param_host_perio_tx_fifo_size_default);
++	dwc_otg_set_param_max_transfer_size(core_if,
++					    dwc_param_max_transfer_size_default);
++	dwc_otg_set_param_max_packet_count(core_if,
++					   dwc_param_max_packet_count_default);
++	dwc_otg_set_param_host_channels(core_if,
++					dwc_param_host_channels_default);
++	dwc_otg_set_param_dev_endpoints(core_if,
++					dwc_param_dev_endpoints_default);
++	dwc_otg_set_param_phy_type(core_if, dwc_param_phy_type_default);
++	dwc_otg_set_param_speed(core_if, dwc_param_speed_default);
++	dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++						    dwc_param_host_ls_low_power_phy_clk_default);
++	dwc_otg_set_param_phy_ulpi_ddr(core_if, dwc_param_phy_ulpi_ddr_default);
++	dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++					    dwc_param_phy_ulpi_ext_vbus_default);
++	dwc_otg_set_param_phy_utmi_width(core_if,
++					 dwc_param_phy_utmi_width_default);
++	dwc_otg_set_param_ts_dline(core_if, dwc_param_ts_dline_default);
++	dwc_otg_set_param_i2c_enable(core_if, dwc_param_i2c_enable_default);
++	dwc_otg_set_param_ulpi_fs_ls(core_if, dwc_param_ulpi_fs_ls_default);
++	dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++					      dwc_param_en_multiple_tx_fifo_default);
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++							 dwc_param_dev_perio_tx_fifo_size_default,
++							 i);
++	}
++
++	for (i = 0; i < 15; i++) {
++		dwc_otg_set_param_dev_tx_fifo_size(core_if,
++						   dwc_param_dev_tx_fifo_size_default,
++						   i);
++	}
++	dwc_otg_set_param_thr_ctl(core_if, dwc_param_thr_ctl_default);
++	dwc_otg_set_param_mpi_enable(core_if, dwc_param_mpi_enable_default);
++	dwc_otg_set_param_pti_enable(core_if, dwc_param_pti_enable_default);
++	dwc_otg_set_param_lpm_enable(core_if, dwc_param_lpm_enable_default);
++	dwc_otg_set_param_ic_usb_cap(core_if, dwc_param_ic_usb_cap_default);
++	dwc_otg_set_param_tx_thr_length(core_if,
++					dwc_param_tx_thr_length_default);
++	dwc_otg_set_param_rx_thr_length(core_if,
++					dwc_param_rx_thr_length_default);
++	dwc_otg_set_param_ahb_thr_ratio(core_if,
++					dwc_param_ahb_thr_ratio_default);
++	dwc_otg_set_param_power_down(core_if, dwc_param_power_down_default);
++	dwc_otg_set_param_reload_ctl(core_if, dwc_param_reload_ctl_default);
++	dwc_otg_set_param_dev_out_nak(core_if, dwc_param_dev_out_nak_default);
++	dwc_otg_set_param_cont_on_bna(core_if, dwc_param_cont_on_bna_default);
++	dwc_otg_set_param_ahb_single(core_if, dwc_param_ahb_single_default);
++	dwc_otg_set_param_otg_ver(core_if, dwc_param_otg_ver_default);
++	dwc_otg_set_param_adp_enable(core_if, dwc_param_adp_enable_default);
++	DWC_PRINTF("Finished setting default values for core params\n");
++
++	return 0;
++}
++
++uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->dma_enable;
++}
++
++/* Checks if the parameter is outside of its valid range of values */
++#define DWC_OTG_PARAM_TEST(_param_, _low_, _high_) \
++		(((_param_) < (_low_)) || \
++		((_param_) > (_high_)))
++
++/* Parameter access functions */
++int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int valid;
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for otg_cap parameter\n");
++		DWC_WARN("otg_cap parameter must be 0,1 or 2\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	valid = 1;
++	switch (val) {
++	case DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE:
++		if (core_if->hwcfg2.b.op_mode !=
++		    DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++			valid = 0;
++		break;
++	case DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE:
++		if ((core_if->hwcfg2.b.op_mode !=
++		     DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		    && (core_if->hwcfg2.b.op_mode !=
++			DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) {
++			valid = 0;
++		}
++		break;
++	case DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE:
++		/* always valid */
++		break;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->otg_cap)) {
++			DWC_ERROR
++			    ("%d invalid for otg_cap paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (((core_if->hwcfg2.b.op_mode ==
++		       DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE)
++		      || (core_if->hwcfg2.b.op_mode ==
++			  DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST)) ?
++		     DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE :
++		     DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_cap = val;
++out:
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_cap;
++}
++
++int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for opt parameter\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->opt = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->opt;
++}
++
++int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma enable\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.architecture == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dma_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dma_enable = val;
++	if (val == 0) {
++		dwc_otg_set_param_dma_desc_enable(core_if, 0);
++	}
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_enable;
++}
++
++int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for dma_enable\n");
++		DWC_WARN("dma_desc_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1)
++	    && ((dwc_otg_get_param_dma_enable(core_if) == 0)
++		|| (core_if->hwcfg4.b.desc_dma == 0))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dma_desc_enable)) {
++			DWC_ERROR
++			    ("%d invalid for dma_desc_enable paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_desc_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_desc_enable;
++}
++
++int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t * core_if,
++						   int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for host_support_fs_low_power\n");
++		DWC_WARN("host_support_fs_low_power must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->host_support_fs_ls_low_power = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++						       core_if)
++{
++	return core_if->core_params->host_support_fs_ls_low_power;
++}
++
++int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for enable_dynamic_fifo\n");
++		DWC_WARN("enable_dynamic_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->hwcfg2.b.dynamic_fifo == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->enable_dynamic_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for enable_dynamic_fifo paremter. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->enable_dynamic_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->enable_dynamic_fifo;
++}
++
++int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 32, 32768)) {
++		DWC_WARN("Wrong value for data_fifo_size\n");
++		DWC_WARN("data_fifo_size must be 32-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > core_if->hwcfg3.b.dfifo_depth) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->data_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for data_fifo_size parameter. Check HW configuration.\n",
++			     val);
++		}
++		val = core_if->hwcfg3.b.dfifo_depth;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->data_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->data_fifo_size;
++}
++
++int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_rx_fifo_size\n");
++		DWC_WARN("dev_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_rx_fifo_size)) {
++		DWC_WARN("%d invalid for dev_rx_fifo_size parameter\n", val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_rx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_rx_fifo_size;
++}
++
++int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for dev_nperio_tx_fifo\n");
++		DWC_WARN("dev_nperio_tx_fifo must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for dev_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_rx_fifo_size\n");
++		DWC_WARN("host_rx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > DWC_READ_REG32(&core_if->core_global_regs->grxfsiz)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_rx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_rx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_rx_fifo_size = val;
++	return retval;
++
++}
++
++int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_rx_fifo_size;
++}
++
++int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_nperio_tx_fifo_size\n");
++		DWC_WARN("host_nperio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_nperio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_nperio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz) >>
++		     16);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_nperio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_nperio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 16, 32768)) {
++		DWC_WARN("Wrong value for host_perio_tx_fifo_size\n");
++		DWC_WARN("host_perio_tx_fifo_size must be 16-32768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > ((core_if->hptxfsiz.d32) >> 16)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_perio_tx_fifo_size)) {
++			DWC_ERROR
++			    ("%d invalid for host_perio_tx_fifo_size. Check HW configuration.\n",
++			     val);
++		}
++		val = (core_if->hptxfsiz.d32) >> 16;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_perio_tx_fifo_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_perio_tx_fifo_size;
++}
++
++int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 2047, 524288)) {
++		DWC_WARN("Wrong value for max_transfer_size\n");
++		DWC_WARN("max_transfer_size must be 2047-524288\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >= (1 << (core_if->hwcfg3.b.xfer_size_cntr_width + 11))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_transfer_size)) {
++			DWC_ERROR
++			    ("%d invalid for max_transfer_size. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 11)) -
++		     1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_transfer_size = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_transfer_size;
++}
++
++int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 15, 511)) {
++		DWC_WARN("Wrong value for max_packet_count\n");
++		DWC_WARN("max_packet_count must be 15-511\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->max_packet_count)) {
++			DWC_ERROR
++			    ("%d invalid for max_packet_count. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    ((1 << (core_if->hwcfg3.b.packet_size_cntr_width + 4)) - 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->max_packet_count = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->max_packet_count;
++}
++
++int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 16)) {
++		DWC_WARN("Wrong value for host_channels\n");
++		DWC_WARN("host_channels must be 1-16\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_host_chan + 1)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_channels)) {
++			DWC_ERROR
++			    ("%d invalid for host_channels. Check HW configurations.\n",
++			     val);
++		}
++		val = (core_if->hwcfg2.b.num_host_chan + 1);
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_channels = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_channels;
++}
++
++int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 1, 15)) {
++		DWC_WARN("Wrong value for dev_endpoints\n");
++		DWC_WARN("dev_endpoints must be 1-15\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val > (core_if->hwcfg2.b.num_dev_ep)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_endpoints)) {
++			DWC_ERROR
++			    ("%d invalid for dev_endpoints. Check HW configurations.\n",
++			     val);
++		}
++		val = core_if->hwcfg2.b.num_dev_ep;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_endpoints = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_endpoints;
++}
++
++int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 2)) {
++		DWC_WARN("Wrong value for phy_type\n");
++		DWC_WARN("phy_type must be 0,1 or 2\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECKS
++	if ((val == DWC_PHY_TYPE_PARAM_UTMI) &&
++	    ((core_if->hwcfg2.b.hs_phy_type == 1) ||
++	     (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_ULPI) &&
++		   ((core_if->hwcfg2.b.hs_phy_type == 2) ||
++		    (core_if->hwcfg2.b.hs_phy_type == 3))) {
++		valid = 1;
++	} else if ((val == DWC_PHY_TYPE_PARAM_FS) &&
++		   (core_if->hwcfg2.b.fs_phy_type == 1)) {
++		valid = 1;
++	}
++	if (!valid) {
++		if (dwc_otg_param_initialized(core_if->core_params->phy_type)) {
++			DWC_ERROR
++			    ("%d invalid for phy_type. Check HW configurations.\n",
++			     val);
++		}
++		if (core_if->hwcfg2.b.hs_phy_type) {
++			if ((core_if->hwcfg2.b.hs_phy_type == 3) ||
++			    (core_if->hwcfg2.b.hs_phy_type == 1)) {
++				val = DWC_PHY_TYPE_PARAM_UTMI;
++			} else {
++				val = DWC_PHY_TYPE_PARAM_ULPI;
++			}
++		}
++		retval = -DWC_E_INVALID;
++	}
++#endif
++	core_if->core_params->phy_type = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_type;
++}
++
++int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for speed parameter\n");
++		DWC_WARN("max_speed parameter must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++	if ((val == 0)
++	    && dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS) {
++		if (dwc_otg_param_initialized(core_if->core_params->speed)) {
++			DWC_ERROR
++			    ("%d invalid for speed paremter. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS ? 1 : 0);
++		retval = -DWC_E_INVALID;
++	}
++	core_if->core_params->speed = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->speed;
++}
++
++int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if,
++						int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN
++		    ("Wrong value for host_ls_low_power_phy_clk parameter\n");
++		DWC_WARN("host_ls_low_power_phy_clk must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ)
++	    && (dwc_otg_get_param_phy_type(core_if) == DWC_PHY_TYPE_PARAM_FS)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->host_ls_low_power_phy_clk)) {
++			DWC_ERROR
++			    ("%d invalid for host_ls_low_power_phy_clk. Check HW configuration.\n",
++			     val);
++		}
++		val =
++		    (dwc_otg_get_param_phy_type(core_if) ==
++		     DWC_PHY_TYPE_PARAM_FS) ?
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ :
++		    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->host_ls_low_power_phy_clk = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->host_ls_low_power_phy_clk;
++}
++
++int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for phy_ulpi_ddr\n");
++		DWC_WARN("phy_upli_ddr must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ddr = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ddr;
++}
++
++int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for phy_ulpi_ext_vbus\n");
++		DWC_WARN("phy_ulpi_ext_vbus must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_ulpi_ext_vbus = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_ulpi_ext_vbus;
++}
++
++int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 8) && DWC_OTG_PARAM_TEST(val, 16, 16)) {
++		DWC_WARN("Wrong valaue for phy_utmi_width\n");
++		DWC_WARN("phy_utmi_width must be 8 or 16\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->phy_utmi_width = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->phy_utmi_width;
++}
++
++int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ulpi_fs_ls\n");
++		DWC_WARN("ulpi_fs_ls must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ulpi_fs_ls = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ulpi_fs_ls;
++}
++
++int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for ts_dline\n");
++		DWC_WARN("ts_dline must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->ts_dline = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ts_dline;
++}
++
++int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for i2c_enable\n");
++		DWC_WARN("i2c_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++#ifndef NO_FS_PHY_HW_CHECK
++	if (val == 1 && core_if->hwcfg3.b.i2c == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->i2c_enable)) {
++			DWC_ERROR
++			    ("%d invalid for i2c_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++#endif
++
++	core_if->core_params->i2c_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->i2c_enable;
++}
++
++int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					     int32_t val, int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_perio_tx_fifo_size\n");
++		DWC_WARN("dev_perio_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_perio_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_perio_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_perio_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						 int fifo_num)
++{
++	return core_if->core_params->dev_perio_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++					  int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong valaue for en_multiple_tx_fifo,\n");
++		DWC_WARN("en_multiple_tx_fifo must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val == 1 && core_if->hwcfg4.b.ded_fifo_en == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->en_multiple_tx_fifo)) {
++			DWC_ERROR
++			    ("%d invalid for parameter en_multiple_tx_fifo. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->en_multiple_tx_fifo = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->en_multiple_tx_fifo;
++}
++
++int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if, int32_t val,
++				       int fifo_num)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 4, 768)) {
++		DWC_WARN("Wrong value for dev_tx_fifo_size\n");
++		DWC_WARN("dev_tx_fifo_size must be 4-768\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val >
++	    (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]))) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->dev_tx_fifo_size[fifo_num])) {
++			DWC_ERROR
++			    ("`%d' invalid for parameter `dev_tx_fifo_size_%d'. Check HW configuration.\n",
++			     val, fifo_num);
++		}
++		val = (DWC_READ_REG32(&core_if->core_global_regs->dtxfsiz[fifo_num]));
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->dev_tx_fifo_size[fifo_num] = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					   int fifo_num)
++{
++	return core_if->core_params->dev_tx_fifo_size[fifo_num];
++}
++
++int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 7)) {
++		DWC_WARN("Wrong value for thr_ctl\n");
++		DWC_WARN("thr_ctl must be 0-7\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val != 0) &&
++	    (!dwc_otg_get_param_dma_enable(core_if) ||
++	     !core_if->hwcfg4.b.ded_fifo_en)) {
++		if (dwc_otg_param_initialized(core_if->core_params->thr_ctl)) {
++			DWC_ERROR
++			    ("%d invalid for parameter thr_ctl. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->thr_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_thr_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->thr_ctl;
++}
++
++int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("Wrong value for lpm_enable\n");
++		DWC_WARN("lpm_enable must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && !core_if->hwcfg3.b.otg_lpm_en) {
++		if (dwc_otg_param_initialized(core_if->core_params->lpm_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter lpm_enable. Check HW configuration.\n",
++			     val);
++		}
++		val = 0;
++		retval = -DWC_E_INVALID;
++	}
++
++	core_if->core_params->lpm_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->lpm_enable;
++}
++
++int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for tx_thr_length\n");
++		DWC_WARN("tx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->tx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_tx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->tx_thr_length;
++}
++
++int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 8, 128)) {
++		DWC_WARN("Wrong valaue for rx_thr_length\n");
++		DWC_WARN("rx_thr_length must be 8 - 128\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->rx_thr_length = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_rx_thr_length(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->rx_thr_length;
++}
++
++int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	if (DWC_OTG_PARAM_TEST(val, 1, 1) &&
++	    DWC_OTG_PARAM_TEST(val, 4, 4) &&
++	    DWC_OTG_PARAM_TEST(val, 8, 8) &&
++	    DWC_OTG_PARAM_TEST(val, 16, 16) &&
++	    DWC_OTG_PARAM_TEST(val, 32, 32) &&
++	    DWC_OTG_PARAM_TEST(val, 64, 64) &&
++	    DWC_OTG_PARAM_TEST(val, 128, 128) &&
++	    DWC_OTG_PARAM_TEST(val, 256, 256)) {
++		DWC_WARN("`%d' invalid for parameter `dma_burst_size'\n", val);
++		return -DWC_E_INVALID;
++	}
++	core_if->core_params->dma_burst_size = val;
++	return 0;
++}
++
++int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dma_burst_size;
++}
++
++int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `pti_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->snpsid < OTG_CORE_REV_2_72a)) {
++		if (dwc_otg_param_initialized(core_if->core_params->pti_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter pti_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->pti_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->pti_enable;
++}
++
++int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `mpi_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg2.b.multi_proc_int == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->mpi_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter mpi_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->mpi_enable = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->mpi_enable;
++}
++
++int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `adp_enable'\n", val);
++		return -DWC_E_INVALID;
++	}
++	if (val && (core_if->hwcfg3.b.adp_supp == 0)) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->adp_supp_enable)) {
++			DWC_ERROR
++			    ("%d invalid for parameter adp_enable. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->adp_supp_enable = val;
++	/*Set OTG version 2.0 in case of enabling ADP*/
++	if (val)
++		dwc_otg_set_param_otg_ver(core_if, 1);
++
++	return retval;
++}
++
++int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->adp_supp_enable;
++}
++
++int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ic_usb_cap'\n", val);
++		DWC_WARN("ic_usb_cap must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val && (core_if->hwcfg2.b.otg_enable_ic_usb == 0)) {
++		if (dwc_otg_param_initialized(core_if->core_params->ic_usb_cap)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ic_usb_cap. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ic_usb_cap = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ic_usb_cap;
++}
++
++int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_thr_ratio'\n", val);
++		DWC_WARN("ahb_thr_ratio must be 0 - 3\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (val
++	    && (core_if->snpsid < OTG_CORE_REV_2_81a
++		|| !dwc_otg_get_param_thr_ctl(core_if))) {
++		valid = 0;
++	} else if (val
++		   && ((dwc_otg_get_param_tx_thr_length(core_if) / (1 << val)) <
++		       4)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized
++		    (core_if->core_params->ahb_thr_ratio)) {
++			DWC_ERROR
++			    ("%d invalid for parameter ahb_thr_ratio. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++
++	core_if->core_params->ahb_thr_ratio = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_thr_ratio;
++}
++
++int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++	hwcfg4_data_t hwcfg4 = {.d32 = 0 };
++	hwcfg4.d32 = DWC_READ_REG32(&core_if->core_global_regs->ghwcfg4);
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 3)) {
++		DWC_WARN("`%d' invalid for parameter `power_down'\n", val);
++		DWC_WARN("power_down must be 0 - 2\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 2) && (core_if->snpsid < OTG_CORE_REV_2_91a)) {
++		valid = 0;
++	}
++	if ((val == 3)
++	    && ((core_if->snpsid < OTG_CORE_REV_3_00a)
++		|| (hwcfg4.b.xhiber == 0))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->power_down)) {
++			DWC_ERROR
++			    ("%d invalid for parameter power_down. Check HW configuration.\n",
++			     val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->power_down = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->power_down;
++}
++
++int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `reload_ctl'\n", val);
++		DWC_WARN("reload_ctl must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_92a)) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->reload_ctl)) {
++			DWC_ERROR("%d invalid for parameter reload_ctl."
++				  "Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->reload_ctl = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->reload_ctl;
++}
++
++int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `dev_out_nak'\n", val);
++		DWC_WARN("dev_out_nak must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_93a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++		valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->dev_out_nak)) {
++			DWC_ERROR("%d invalid for parameter dev_out_nak."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->dev_out_nak = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->dev_out_nak;
++}
++
++int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `cont_on_bna'\n", val);
++		DWC_WARN("cont_on_bna must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && ((core_if->snpsid < OTG_CORE_REV_2_94a) ||
++		!(core_if->core_params->dma_desc_enable))) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->cont_on_bna)) {
++			DWC_ERROR("%d invalid for parameter cont_on_bna."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->cont_on_bna = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->cont_on_bna;
++}
++
++int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++	int valid = 1;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `ahb_single'\n", val);
++		DWC_WARN("ahb_single must be 0 or 1\n");
++		return -DWC_E_INVALID;
++	}
++
++	if ((val == 1) && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++			valid = 0;
++	}
++	if (valid == 0) {
++		if (dwc_otg_param_initialized(core_if->core_params->ahb_single)) {
++			DWC_ERROR("%d invalid for parameter ahb_single."
++				"Check HW configuration.\n", val);
++		}
++		retval = -DWC_E_INVALID;
++		val = 0;
++	}
++	core_if->core_params->ahb_single = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->ahb_single;
++}
++
++int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val)
++{
++	int retval = 0;
++
++	if (DWC_OTG_PARAM_TEST(val, 0, 1)) {
++		DWC_WARN("`%d' invalid for parameter `otg_ver'\n", val);
++		DWC_WARN
++		    ("otg_ver must be 0(for OTG 1.3 support) or 1(for OTG 2.0 support)\n");
++		return -DWC_E_INVALID;
++	}
++
++	core_if->core_params->otg_ver = val;
++	return retval;
++}
++
++int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if)
++{
++	return core_if->core_params->otg_ver;
++}
++
++uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.hstnegscs;
++}
++
++uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if)
++{
++	gotgctl_data_t otgctl;
++	otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	return otgctl.b.sesreqscs;
++}
++
++void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	if(core_if->otg_ver == 0) {
++		gotgctl_data_t otgctl;
++		otgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		otgctl.b.hnpreq = val;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, otgctl.d32);
++	} else {
++		core_if->otg_sts = val;
++	}
++}
++
++uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if)
++{
++	return core_if->snpsid;
++}
++
++uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	return gintsts.b.curmode;
++}
++
++uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.hnpcap;
++}
++
++void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.hnpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	return usbcfg.b.srpcap;
++}
++
++void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	gusbcfg_data_t usbcfg;
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	usbcfg.b.srpcap = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, usbcfg.d32);
++}
++
++uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if)
++{
++	dcfg_data_t dcfg;
++	/* originally: dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg); */
++
++        dcfg.d32 = -1; //GRAYG
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)\n", __func__, core_if);
++        if (NULL == core_if)
++                DWC_ERROR("reg request with NULL core_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)\n", __func__,
++                    core_if, core_if->dev_if);
++        if (NULL == core_if->dev_if)
++                DWC_ERROR("reg request with NULL dev_if\n");
++        DWC_DEBUGPL(DBG_CILV, "%s - core_if(%p)->dev_if(%p)->"
++                    "dev_global_regs(%p)\n", __func__,
++                    core_if, core_if->dev_if,
++                    core_if->dev_if->dev_global_regs);
++        if (NULL == core_if->dev_if->dev_global_regs)
++                DWC_ERROR("reg request with NULL dev_global_regs\n");
++        else {
++                DWC_DEBUGPL(DBG_CILV, "%s - &core_if(%p)->dev_if(%p)->"
++                            "dev_global_regs(%p)->dcfg = %p\n", __func__,
++                            core_if, core_if->dev_if,
++                            core_if->dev_if->dev_global_regs,
++                            &core_if->dev_if->dev_global_regs->dcfg);
++		dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++        }
++	return dcfg.b.devspd;
++}
++
++void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	dcfg_data_t dcfg;
++	dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++	dcfg.b.devspd = val;
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, dcfg.d32);
++}
++
++uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtconnsts;
++}
++
++uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	return dsts.b.enumspd;
++}
++
++uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtpwr;
++
++}
++
++uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if)
++{
++	return core_if->hibernation_suspend;
++}
++
++void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtpwr = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++	return hprt0.b.prtsusp;
++
++}
++
++void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtsusp = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if)
++{
++	hfir_data_t hfir;
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	return hfir.b.frint;
++
++}
++
++void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hfir_data_t hfir;
++	uint32_t fram_int;
++	fram_int = calc_frame_interval(core_if);
++	hfir.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hfir);
++	if (!core_if->core_params->reload_ctl) {
++		DWC_WARN("\nCannot reload HFIR register.HFIR.HFIRRldCtrl bit is"
++			 "not set to 1.\nShould load driver with reload_ctl=1"
++			 " module parameter\n");
++		return;
++	}
++	switch (fram_int) {
++	case 3750:
++		if ((val < 3350) || (val > 4150)) {
++			DWC_WARN("HFIR interval for HS core and 30 MHz"
++				 "clock freq should be from 3350 to 4150\n");
++			return;
++		}
++		break;
++	case 30000:
++		if ((val < 26820) || (val > 33180)) {
++			DWC_WARN("HFIR interval for FS/LS core and 30 MHz"
++				 "clock freq should be from 26820 to 33180\n");
++			return;
++		}
++		break;
++	case 6000:
++		if ((val < 5360) || (val > 6640)) {
++			DWC_WARN("HFIR interval for HS core and 48 MHz"
++				 "clock freq should be from 5360 to 6640\n");
++			return;
++		}
++		break;
++	case 48000:
++		if ((val < 42912) || (val > 53088)) {
++			DWC_WARN("HFIR interval for FS/LS core and 48 MHz"
++				 "clock freq should be from 42912 to 53088\n");
++			return;
++		}
++		break;
++	case 7500:
++		if ((val < 6700) || (val > 8300)) {
++			DWC_WARN("HFIR interval for HS core and 60 MHz"
++				 "clock freq should be from 6700 to 8300\n");
++			return;
++		}
++		break;
++	case 60000:
++		if ((val < 53640) || (val > 65536)) {
++			DWC_WARN("HFIR interval for FS/LS core and 60 MHz"
++				 "clock freq should be from 53640 to 65536\n");
++			return;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown frame interval\n");
++		return;
++		break;
++
++	}
++	hfir.b.frint = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hfir, hfir.d32);
++}
++
++uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	return hcfg.b.modechtimen;
++
++}
++
++void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hcfg_data_t hcfg;
++	hcfg.d32 = DWC_READ_REG32(&core_if->host_if->host_global_regs->hcfg);
++	hcfg.b.modechtimen = val;
++	DWC_WRITE_REG32(&core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtres = val;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++}
++
++uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if)
++{
++	dctl_data_t dctl;
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	return dctl.b.rmtwkupsig;
++}
++
++uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	DWC_ASSERT(!
++		   ((core_if->lx_state == DWC_OTG_L1) ^ lpmcfg.b.prt_sleep_sts),
++		   "lx_state = %d, lmpcfg.prt_sleep_sts = %d\n",
++		   core_if->lx_state, lpmcfg.b.prt_sleep_sts);
++
++	return lpmcfg.b.prt_sleep_sts;
++}
++
++uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.rem_wkup_en;
++}
++
++uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.appl_resp;
++}
++
++void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.appl_resp = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.hsic_connect;
++}
++
++void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.hsic_connect = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	return lpmcfg.b.inv_sel_hsic;
++
++}
++
++void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	glpmcfg_data_t lpmcfg;
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.inv_sel_hsic = val;
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++}
++
++uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++}
++
++void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgctl, val);
++}
++
++uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++}
++
++void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, val);
++}
++
++uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++}
++
++void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->grxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gnptxfsiz);
++}
++
++void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gnptxfsiz, val);
++}
++
++uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->gpvndctl);
++}
++
++void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpvndctl, val);
++}
++
++uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->ggpio);
++}
++
++void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, val);
++}
++
++uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(core_if->host_if->hprt0);
++
++}
++
++void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(core_if->host_if->hprt0, val);
++}
++
++uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->guid);
++}
++
++void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val)
++{
++	DWC_WRITE_REG32(&core_if->core_global_regs->guid, val);
++}
++
++uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if)
++{
++	return DWC_READ_REG32(&core_if->core_global_regs->hptxfsiz);
++}
++
++uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if)
++{
++	return ((core_if->otg_ver == 1) ? (uint16_t)0x0200 : (uint16_t)0x0103);
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param core_if the pointer to core_if strucure.
++ */
++void dwc_otg_pcd_start_srp_timer(dwc_otg_core_if_t * core_if)
++{
++	core_if->srp_timer_started = 1;
++	DWC_TIMER_SCHEDULE(core_if->srp_timer, 6000 /* 6 secs */ );
++}
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if)
++{
++	uint32_t *addr = (uint32_t *) & (core_if->core_global_regs->gotgctl);
++	gotgctl_data_t mem;
++	gotgctl_data_t val;
++
++	val.d32 = DWC_READ_REG32(addr);
++	if (val.b.sesreq) {
++		DWC_ERROR("Session Request Already active!\n");
++		return;
++	}
++
++	DWC_INFO("Session Request Initated\n");	//NOTICE
++	mem.d32 = DWC_READ_REG32(addr);
++	mem.b.sesreq = 1;
++	DWC_WRITE_REG32(addr, mem.d32);
++
++	/* Start the SRP timer */
++	dwc_otg_pcd_start_srp_timer(core_if);
++	return;
++}
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil.h b/drivers/usb/host/dwc_otg/dwc_otg_cil.h
+new file mode 100644
+index 0000000..79dbf83
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil.h
+@@ -0,0 +1,1464 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil.h $
++ * $Revision: #123 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#if !defined(__DWC_CIL_H__)
++#define __DWC_CIL_H__
++
++#include "dwc_list.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_regs.h"
++
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_adp.h"
++
++/**
++ * @file
++ * This file contains the interface to the Core Interface Layer.
++ */
++
++#ifdef DWC_UTE_CFI
++
++#define MAX_DMA_DESCS_PER_EP	256
++
++/**
++ * Enumeration for the data buffer mode
++ */
++typedef enum _data_buffer_mode {
++	BM_STANDARD = 0,	/* data buffer is in normal mode */
++	BM_SG = 1,		/* data buffer uses the scatter/gather mode */
++	BM_CONCAT = 2,		/* data buffer uses the concatenation mode */
++	BM_CIRCULAR = 3,	/* data buffer uses the circular DMA mode */
++	BM_ALIGN = 4		/* data buffer is in buffer alignment mode */
++} data_buffer_mode_e;
++#endif //DWC_UTE_CFI
++
++/** Macros defined for DWC OTG HW Release version */
++
++#define OTG_CORE_REV_2_60a	0x4F54260A
++#define OTG_CORE_REV_2_71a	0x4F54271A
++#define OTG_CORE_REV_2_72a	0x4F54272A
++#define OTG_CORE_REV_2_80a	0x4F54280A
++#define OTG_CORE_REV_2_81a	0x4F54281A
++#define OTG_CORE_REV_2_90a	0x4F54290A
++#define OTG_CORE_REV_2_91a	0x4F54291A
++#define OTG_CORE_REV_2_92a	0x4F54292A
++#define OTG_CORE_REV_2_93a	0x4F54293A
++#define OTG_CORE_REV_2_94a	0x4F54294A
++#define OTG_CORE_REV_3_00a	0x4F54300A
++
++/**
++ * Information for each ISOC packet.
++ */
++typedef struct iso_pkt_info {
++	uint32_t offset;
++	uint32_t length;
++	int32_t status;
++} iso_pkt_info_t;
++
++/**
++ * The <code>dwc_ep</code> structure represents the state of a single
++ * endpoint when acting in device mode. It contains the data items
++ * needed for an endpoint to be activated and transfer packets.
++ */
++typedef struct dwc_ep {
++	/** EP number used for register address lookup */
++	uint8_t num;
++	/** EP direction 0 = OUT */
++	unsigned is_in:1;
++	/** EP active. */
++	unsigned active:1;
++
++	/**
++	 * Periodic Tx FIFO # for IN EPs For INTR EP set to 0 to use non-periodic
++	 * Tx FIFO. If dedicated Tx FIFOs are enabled Tx FIFO # FOR IN EPs*/
++	unsigned tx_fifo_num:4;
++	/** EP type: 0 - Control, 1 - ISOC,	 2 - BULK,	3 - INTR */
++	unsigned type:2;
++#define DWC_OTG_EP_TYPE_CONTROL	   0
++#define DWC_OTG_EP_TYPE_ISOC	   1
++#define DWC_OTG_EP_TYPE_BULK	   2
++#define DWC_OTG_EP_TYPE_INTR	   3
++
++	/** DATA start PID for INTR and BULK EP */
++	unsigned data_pid_start:1;
++	/** Frame (even/odd) for ISOC EP */
++	unsigned even_odd_frame:1;
++	/** Max Packet bytes */
++	unsigned maxpacket:11;
++
++	/** Max Transfer size */
++	uint32_t maxxfer;
++
++	/** @name Transfer state */
++	/** @{ */
++
++	/**
++	 * Pointer to the beginning of the transfer buffer -- do not modify
++	 * during transfer.
++	 */
++
++	dwc_dma_t dma_addr;
++
++	dwc_dma_t dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++
++	uint8_t *start_xfer_buff;
++	/** pointer to the transfer buffer */
++	uint8_t *xfer_buff;
++	/** Number of bytes to transfer */
++	unsigned xfer_len:19;
++	/** Number of bytes transferred. */
++	unsigned xfer_count:19;
++	/** Sent ZLP */
++	unsigned sent_zlp:1;
++	/** Total len for control transfer */
++	unsigned total_len:19;
++
++	/** stall clear flag */
++	unsigned stall_clear_flag:1;
++
++	/** SETUP pkt cnt rollover flag for EP0 out*/
++	unsigned stp_rollover;
++
++#ifdef DWC_UTE_CFI
++	/* The buffer mode */
++	data_buffer_mode_e buff_mode;
++
++	/* The chain of DMA descriptors.
++	 * MAX_DMA_DESCS_PER_EP will be allocated for each active EP.
++	 */
++	dwc_otg_dma_desc_t *descs;
++
++	/* The DMA address of the descriptors chain start */
++	dma_addr_t descs_dma_addr;
++	/** This variable stores the length of the last enqueued request */
++	uint32_t cfi_req_len;
++#endif				//DWC_UTE_CFI
++
++/** Max DMA Descriptor count for any EP */
++#define MAX_DMA_DESC_CNT 256
++	/** Allocated DMA Desc count */
++	uint32_t desc_cnt;
++
++	/** bInterval */
++	uint32_t bInterval;
++	/** Next frame num to setup next ISOC transfer */
++	uint32_t frame_num;
++	/** Indicates SOF number overrun in DSTS */
++	uint8_t frm_overrun;
++
++#ifdef DWC_UTE_PER_IO
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t xiso_frame_num;
++	/** bInterval */
++	uint32_t xiso_bInterval;
++	/** Count of currently active transfers - shall be either 0 or 1 */
++	int xiso_active_xfers;
++	int xiso_queued_xfers;
++#endif
++#ifdef DWC_EN_ISOC
++	/**
++	 * Variables specific for ISOC EPs
++	 *
++	 */
++	/** DMA addresses of ISOC buffers */
++	dwc_dma_t dma_addr0;
++	dwc_dma_t dma_addr1;
++
++	dwc_dma_t iso_dma_desc_addr;
++	dwc_otg_dev_dma_desc_t *iso_desc_addr;
++
++	/** pointer to the transfer buffers */
++	uint8_t *xfer_buff0;
++	uint8_t *xfer_buff1;
++
++	/** number of ISOC Buffer is processing */
++	uint32_t proc_buf_num;
++	/** Interval of ISOC Buffer processing */
++	uint32_t buf_proc_intrvl;
++	/** Data size for regular frame */
++	uint32_t data_per_frame;
++
++	/* todo - pattern data support is to be implemented in the future */
++	/** Data size for pattern frame */
++	uint32_t data_pattern_frame;
++	/** Frame number of pattern data */
++	uint32_t sync_frame;
++
++	/** bInterval */
++	uint32_t bInterval;
++	/** ISO Packet number per frame */
++	uint32_t pkt_per_frm;
++	/** Next frame num for which will be setup DMA Desc */
++	uint32_t next_frame;
++	/** Number of packets per buffer processing */
++	uint32_t pkt_cnt;
++	/** Info for all isoc packets */
++	iso_pkt_info_t *pkt_info;
++	/** current pkt number */
++	uint32_t cur_pkt;
++	/** current pkt number */
++	uint8_t *cur_pkt_addr;
++	/** current pkt number */
++	uint32_t cur_pkt_dma_addr;
++#endif				/* DWC_EN_ISOC */
++
++/** @} */
++} dwc_ep_t;
++
++/*
++ * Reasons for halting a host channel.
++ */
++typedef enum dwc_otg_halt_status {
++	DWC_OTG_HC_XFER_NO_HALT_STATUS,
++	DWC_OTG_HC_XFER_COMPLETE,
++	DWC_OTG_HC_XFER_URB_COMPLETE,
++	DWC_OTG_HC_XFER_ACK,
++	DWC_OTG_HC_XFER_NAK,
++	DWC_OTG_HC_XFER_NYET,
++	DWC_OTG_HC_XFER_STALL,
++	DWC_OTG_HC_XFER_XACT_ERR,
++	DWC_OTG_HC_XFER_FRAME_OVERRUN,
++	DWC_OTG_HC_XFER_BABBLE_ERR,
++	DWC_OTG_HC_XFER_DATA_TOGGLE_ERR,
++	DWC_OTG_HC_XFER_AHB_ERR,
++	DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE,
++	DWC_OTG_HC_XFER_URB_DEQUEUE
++} dwc_otg_halt_status_e;
++
++/**
++ * Host channel descriptor. This structure represents the state of a single
++ * host channel when acting in host mode. It contains the data items needed to
++ * transfer packets to an endpoint via a host channel.
++ */
++typedef struct dwc_hc {
++	/** Host channel number used for register address lookup */
++	uint8_t hc_num;
++
++	/** Device to access */
++	unsigned dev_addr:7;
++
++	/** EP to access */
++	unsigned ep_num:4;
++
++	/** EP direction. 0: OUT, 1: IN */
++	unsigned ep_is_in:1;
++
++	/**
++	 * EP speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	unsigned speed:2;
++#define DWC_OTG_EP_SPEED_LOW	0
++#define DWC_OTG_EP_SPEED_FULL	1
++#define DWC_OTG_EP_SPEED_HIGH	2
++
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_TYPE_CONTROL: 0
++	 *	- DWC_OTG_EP_TYPE_ISOC: 1
++	 *	- DWC_OTG_EP_TYPE_BULK: 2
++	 *	- DWC_OTG_EP_TYPE_INTR: 3
++	 */
++	unsigned ep_type:2;
++
++	/** Max packet size in bytes */
++	unsigned max_packet:11;
++
++	/**
++	 * PID for initial transaction.
++	 * 0: DATA0,<br>
++	 * 1: DATA2,<br>
++	 * 2: DATA1,<br>
++	 * 3: MDATA (non-Control EP),
++	 *	  SETUP (Control EP)
++	 */
++	unsigned data_pid_start:2;
++#define DWC_OTG_HC_PID_DATA0 0
++#define DWC_OTG_HC_PID_DATA2 1
++#define DWC_OTG_HC_PID_DATA1 2
++#define DWC_OTG_HC_PID_MDATA 3
++#define DWC_OTG_HC_PID_SETUP 3
++
++	/** Number of periodic transactions per (micro)frame */
++	unsigned multi_count:2;
++
++	/** @name Transfer State */
++	/** @{ */
++
++	/** Pointer to the current transfer buffer position. */
++	uint8_t *xfer_buff;
++	/**
++	 * In Buffer DMA mode this buffer will be used
++	 * if xfer_buff is not DWORD aligned.
++	 */
++	dwc_dma_t align_buff;
++	/** Total number of bytes to transfer. */
++	uint32_t xfer_len;
++	/** Number of bytes transferred so far. */
++	uint32_t xfer_count;
++	/** Packet count at start of transfer.*/
++	uint16_t start_pkt_count;
++
++	/**
++	 * Flag to indicate whether the transfer has been started. Set to 1 if
++	 * it has been started, 0 otherwise.
++	 */
++	uint8_t xfer_started;
++
++	/**
++	 * Set to 1 to indicate that a PING request should be issued on this
++	 * channel. If 0, process normally.
++	 */
++	uint8_t do_ping;
++
++	/**
++	 * Set to 1 to indicate that the error count for this transaction is
++	 * non-zero. Set to 0 if the error count is 0.
++	 */
++	uint8_t error_state;
++
++	/**
++	 * Set to 1 to indicate that this channel should be halted the next
++	 * time a request is queued for the channel. This is necessary in
++	 * slave mode if no request queue space is available when an attempt
++	 * is made to halt the channel.
++	 */
++	uint8_t halt_on_queue;
++
++	/**
++	 * Set to 1 if the host channel has been halted, but the core is not
++	 * finished flushing queued requests. Otherwise 0.
++	 */
++	uint8_t halt_pending;
++
++	/**
++	 * Reason for halting the host channel.
++	 */
++	dwc_otg_halt_status_e halt_status;
++
++	/*
++	 * Split settings for the host channel
++	 */
++	uint8_t do_split;		   /**< Enable split for the channel */
++	uint8_t complete_split;	   /**< Enable complete split */
++	uint8_t hub_addr;		   /**< Address of high speed hub */
++
++	uint8_t port_addr;		   /**< Port of the low/full speed device */
++	/** Split transaction position
++	 * One of the following values:
++	 *	  - DWC_HCSPLIT_XACTPOS_MID
++	 *	  - DWC_HCSPLIT_XACTPOS_BEGIN
++	 *	  - DWC_HCSPLIT_XACTPOS_END
++	 *	  - DWC_HCSPLIT_XACTPOS_ALL */
++	uint8_t xact_pos;
++
++	/** Set when the host channel does a short read. */
++	uint8_t short_read;
++
++	/**
++	 * Number of requests issued for this channel since it was assigned to
++	 * the current transfer (not counting PINGs).
++	 */
++	uint8_t requests;
++
++	/**
++	 * Queue Head for the transfer being processed by this channel.
++	 */
++	struct dwc_otg_qh *qh;
++
++	/** @} */
++
++	/** Entry in list of host channels. */
++	 DWC_CIRCLEQ_ENTRY(dwc_hc) hc_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Number of Transfer Descriptors */
++	uint16_t ntd;
++
++	/** Descriptor List DMA address */
++	dwc_dma_t desc_list_addr;
++
++	/** Scheduling micro-frame bitmap. */
++	uint8_t schinfo;
++
++	/** @} */
++} dwc_hc_t;
++
++/**
++ * The following parameters may be specified when starting the module. These
++ * parameters define how the DWC_otg controller should be configured.
++ */
++typedef struct dwc_otg_core_params {
++	int32_t opt;
++
++	/**
++	 * Specifies the OTG capabilities. The driver will automatically
++	 * detect the value for this parameter if none is specified.
++	 * 0 - HNP and SRP capable (default)
++	 * 1 - SRP Only capable
++	 * 2 - No HNP/SRP capable
++	 */
++	int32_t otg_cap;
++
++	/**
++	 * Specifies whether to use slave or DMA mode for accessing the data
++	 * FIFOs. The driver will automatically detect the value for this
++	 * parameter if none is specified.
++	 * 0 - Slave
++	 * 1 - DMA (default, if available)
++	 */
++	int32_t dma_enable;
++
++	/**
++	 * When DMA mode is enabled specifies whether to use address DMA or DMA
++	 * Descriptor mode for accessing the data FIFOs in device mode. The driver
++	 * will automatically detect the value for this if none is specified.
++	 * 0 - address DMA
++	 * 1 - DMA Descriptor(default, if available)
++	 */
++	int32_t dma_desc_enable;
++	/** The DMA Burst size (applicable only for External DMA
++	 * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++	 */
++	int32_t dma_burst_size;	/* Translate this to GAHBCFG values */
++
++	/**
++	 * Specifies the maximum speed of operation in host and device mode.
++	 * The actual speed depends on the speed of the attached device and
++	 * the value of phy_type. The actual speed depends on the speed of the
++	 * attached device.
++	 * 0 - High Speed (default)
++	 * 1 - Full Speed
++	 */
++	int32_t speed;
++	/** Specifies whether low power mode is supported when attached
++	 *	to a Full Speed or Low Speed device in host mode.
++	 * 0 - Don't support low power mode (default)
++	 * 1 - Support low power mode
++	 */
++	int32_t host_support_fs_ls_low_power;
++
++	/** Specifies the PHY clock rate in low power mode when connected to a
++	 * Low Speed device in host mode. This parameter is applicable only if
++	 * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++	 * then defaults to 6 MHZ otherwise 48 MHZ.
++	 *
++	 * 0 - 48 MHz
++	 * 1 - 6 MHz
++	 */
++	int32_t host_ls_low_power_phy_clk;
++
++	/**
++	 * 0 - Use cC FIFO size parameters
++	 * 1 - Allow dynamic FIFO sizing (default)
++	 */
++	int32_t enable_dynamic_fifo;
++
++	/** Total number of 4-byte words in the data FIFO memory. This
++	 * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++	 * Tx FIFOs.
++	 * 32 to 32768 (default 8192)
++	 * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++	 */
++	int32_t data_fifo_size;
++
++	/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1064)
++	 */
++	int32_t dev_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++	 * when dynamic FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t dev_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_rx_fifo_size;
++
++	/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++	 * when Dynamic FIFO sizing is enabled in the core.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_nperio_tx_fifo_size;
++
++	/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++	 * FIFO sizing is enabled.
++	 * 16 to 32768 (default 1024)
++	 */
++	int32_t host_perio_tx_fifo_size;
++
++	/** The maximum transfer size supported in bytes.
++	 * 2047 to 65,535  (default 65,535)
++	 */
++	int32_t max_transfer_size;
++
++	/** The maximum number of packets in a transfer.
++	 * 15 to 511  (default 511)
++	 */
++	int32_t max_packet_count;
++
++	/** The number of host channel registers to use.
++	 * 1 to 16 (default 12)
++	 * Note: The FPGA configuration supports a maximum of 12 host channels.
++	 */
++	int32_t host_channels;
++
++	/** The number of endpoints in addition to EP0 available for device
++	 * mode operations.
++	 * 1 to 15 (default 6 IN and OUT)
++	 * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++	 * endpoints in addition to EP0.
++	 */
++	int32_t dev_endpoints;
++
++		/**
++		 * Specifies the type of PHY interface to use. By default, the driver
++		 * will automatically detect the phy_type.
++		 *
++		 * 0 - Full Speed PHY
++		 * 1 - UTMI+ (default)
++		 * 2 - ULPI
++		 */
++	int32_t phy_type;
++
++	/**
++	 * Specifies the UTMI+ Data Width. This parameter is
++	 * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++	 * PHY_TYPE, this parameter indicates the data width between
++	 * the MAC and the ULPI Wrapper.) Also, this parameter is
++	 * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++	 * to "8 and 16 bits", meaning that the core has been
++	 * configured to work at either data path width.
++	 *
++	 * 8 or 16 bits (default 16)
++	 */
++	int32_t phy_utmi_width;
++
++	/**
++	 * Specifies whether the ULPI operates at double or single
++	 * data rate. This parameter is only applicable if PHY_TYPE is
++	 * ULPI.
++	 *
++	 * 0 - single data rate ULPI interface with 8 bit wide data
++	 * bus (default)
++	 * 1 - double data rate ULPI interface with 4 bit wide data
++	 * bus
++	 */
++	int32_t phy_ulpi_ddr;
++
++	/**
++	 * Specifies whether to use the internal or external supply to
++	 * drive the vbus with a ULPI phy.
++	 */
++	int32_t phy_ulpi_ext_vbus;
++
++	/**
++	 * Specifies whether to use the I2Cinterface for full speed PHY. This
++	 * parameter is only applicable if PHY_TYPE is FS.
++	 * 0 - No (default)
++	 * 1 - Yes
++	 */
++	int32_t i2c_enable;
++
++	int32_t ulpi_fs_ls;
++
++	int32_t ts_dline;
++
++	/**
++	 * Specifies whether dedicated transmit FIFOs are
++	 * enabled for non periodic IN endpoints in device mode
++	 * 0 - No
++	 * 1 - Yes
++	 */
++	int32_t en_multiple_tx_fifo;
++
++	/** Number of 4-byte words in each of the Tx FIFOs in device
++	 * mode when dynamic FIFO sizing is enabled.
++	 * 4 to 768 (default 256)
++	 */
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flag-
++	 * bit 0 - enable non-ISO Tx thresholding
++	 * bit 1 - enable ISO Tx thresholding
++	 * bit 2 - enable Rx thresholding
++	 */
++	uint32_t thr_ctl;
++
++	/** Thresholding length for Tx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t tx_thr_length;
++
++	/** Thresholding length for Rx
++	 *	FIFOs in 32 bit DWORDs
++	 */
++	uint32_t rx_thr_length;
++
++	/**
++	 * Specifies whether LPM (Link Power Management) support is enabled
++	 */
++	int32_t lpm_enable;
++
++	/** Per Transfer Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t pti_enable;
++
++	/** Multi Processor Interrupt
++	 *	mode enable flag
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t mpi_enable;
++
++	/** IS_USB Capability
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t ic_usb_cap;
++
++	/** AHB Threshold Ratio
++	 * 2'b00 AHB Threshold = 	MAC Threshold
++	 * 2'b01 AHB Threshold = 1/2 	MAC Threshold
++	 * 2'b10 AHB Threshold = 1/4	MAC Threshold
++	 * 2'b11 AHB Threshold = 1/8	MAC Threshold
++	 */
++	int32_t ahb_thr_ratio;
++
++	/** ADP Support
++	 * 1 - Enabled
++	 * 0 - Disabled
++	 */
++	int32_t adp_supp_enable;
++
++	/** HFIR Reload Control
++	 * 0 - The HFIR cannot be reloaded dynamically.
++	 * 1 - Allow dynamic reloading of the HFIR register during runtime.
++	 */
++	int32_t reload_ctl;
++
++	/** DCFG: Enable device Out NAK
++	 * 0 - The core does not set NAK after Bulk Out transfer complete.
++	 * 1 - The core sets NAK after Bulk OUT transfer complete.
++	 */
++	int32_t dev_out_nak;
++
++	/** DCFG: Enable Continue on BNA
++	 * After receiving BNA interrupt the core disables the endpoint,when the
++	 * endpoint is re-enabled by the application the core starts processing
++	 * 0 - from the DOEPDMA descriptor
++	 * 1 - from the descriptor which received the BNA.
++	 */
++	int32_t cont_on_bna;
++
++	/** GAHBCFG: AHB Single Support
++	 * This bit when programmed supports SINGLE transfers for remainder
++	 * data in a transfer for DMA mode of operation.
++	 * 0 - in this case the remainder data will be sent using INCR burst size.
++	 * 1 - in this case the remainder data will be sent using SINGLE burst size.
++	 */
++	int32_t ahb_single;
++
++	/** Core Power down mode
++	 * 0 - No Power Down is enabled
++	 * 1 - Reserved
++	 * 2 - Complete Power Down (Hibernation)
++	 */
++	int32_t power_down;
++
++	/** OTG revision supported
++	 * 0 - OTG 1.3 revision
++	 * 1 - OTG 2.0 revision
++	 */
++	int32_t otg_ver;
++
++} dwc_otg_core_params_t;
++
++#ifdef DEBUG
++struct dwc_otg_core_if;
++typedef struct hc_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_hc_t *hc;
++} hc_xfer_info_t;
++#endif
++
++typedef struct ep_xfer_info {
++	struct dwc_otg_core_if *core_if;
++	dwc_ep_t *ep;
++	uint8_t state;
++} ep_xfer_info_t;
++/*
++ * Device States
++ */
++typedef enum dwc_otg_lx_state {
++	/** On state */
++	DWC_OTG_L0,
++	/** LPM sleep state*/
++	DWC_OTG_L1,
++	/** USB suspend state*/
++	DWC_OTG_L2,
++	/** Off state*/
++	DWC_OTG_L3
++} dwc_otg_lx_state_e;
++
++struct dwc_otg_global_regs_backup {
++	uint32_t gotgctl_local;
++	uint32_t gintmsk_local;
++	uint32_t gahbcfg_local;
++	uint32_t gusbcfg_local;
++	uint32_t grxfsiz_local;
++	uint32_t gnptxfsiz_local;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	uint32_t glpmcfg_local;
++#endif
++	uint32_t gi2cctl_local;
++	uint32_t hptxfsiz_local;
++	uint32_t pcgcctl_local;
++	uint32_t gdfifocfg_local;
++	uint32_t dtxfsiz_local[MAX_EPS_CHANNELS];
++	uint32_t gpwrdn_local;
++	uint32_t xhib_pcgcctl;
++	uint32_t xhib_gpwrdn;
++};
++
++struct dwc_otg_host_regs_backup {
++	uint32_t hcfg_local;
++	uint32_t haintmsk_local;
++	uint32_t hcintmsk_local[MAX_EPS_CHANNELS];
++	uint32_t hprt0_local;
++	uint32_t hfir_local;
++};
++
++struct dwc_otg_dev_regs_backup {
++	uint32_t dcfg;
++	uint32_t dctl;
++	uint32_t daintmsk;
++	uint32_t diepmsk;
++	uint32_t doepmsk;
++	uint32_t diepctl[MAX_EPS_CHANNELS];
++	uint32_t dieptsiz[MAX_EPS_CHANNELS];
++	uint32_t diepdma[MAX_EPS_CHANNELS];
++};
++/**
++ * The <code>dwc_otg_core_if</code> structure contains information needed to manage
++ * the DWC_otg controller acting in either host or device mode. It
++ * represents the programming view of the controller as a whole.
++ */
++struct dwc_otg_core_if {
++	/** Parameters that define how the core should be configured.*/
++	dwc_otg_core_params_t *core_params;
++
++	/** Core Global registers starting at offset 000h. */
++	dwc_otg_core_global_regs_t *core_global_regs;
++
++	/** Device-specific information */
++	dwc_otg_dev_if_t *dev_if;
++	/** Host-specific information */
++	dwc_otg_host_if_t *host_if;
++
++	/** Value from SNPSID register */
++	uint32_t snpsid;
++
++	/*
++	 * Set to 1 if the core PHY interface bits in USBCFG have been
++	 * initialized.
++	 */
++	uint8_t phy_init_done;
++
++	/*
++	 * SRP Success flag, set by srp success interrupt in FS I2C mode
++	 */
++	uint8_t srp_success;
++	uint8_t srp_timer_started;
++	/** Timer for SRP. If it expires before SRP is successful
++	 * clear the SRP. */
++	dwc_timer_t *srp_timer;
++
++#ifdef DWC_DEV_SRPCAP
++	/* This timer is needed to power on the hibernated host core if SRP is not
++	 * initiated on connected SRP capable device for limited period of time
++	 */
++	uint8_t pwron_timer_started;
++	dwc_timer_t *pwron_timer;
++#endif
++	/* Common configuration information */
++	/** Power and Clock Gating Control Register */
++	volatile uint32_t *pcgcctl;
++#define DWC_OTG_PCGCCTL_OFFSET 0xE00
++
++	/** Push/pop addresses for endpoints or host channels.*/
++	uint32_t *data_fifo[MAX_EPS_CHANNELS];
++#define DWC_OTG_DATA_FIFO_OFFSET 0x1000
++#define DWC_OTG_DATA_FIFO_SIZE 0x1000
++
++	/** Total RAM for FIFOs (Bytes) */
++	uint16_t total_fifo_size;
++	/** Size of Rx FIFO (Bytes) */
++	uint16_t rx_fifo_size;
++	/** Size of Non-periodic Tx FIFO (Bytes) */
++	uint16_t nperio_tx_fifo_size;
++
++	/** 1 if DMA is enabled, 0 otherwise. */
++	uint8_t dma_enable;
++
++	/** 1 if DMA descriptor is enabled, 0 otherwise. */
++	uint8_t dma_desc_enable;
++
++	/** 1 if PTI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t pti_enh_enable;
++
++	/** 1 if MPI Enhancement mode is enabled, 0 otherwise. */
++	uint8_t multiproc_int_enable;
++
++	/** 1 if dedicated Tx FIFOs are enabled, 0 otherwise. */
++	uint8_t en_multiple_tx_fifo;
++
++	/** Set to 1 if multiple packets of a high-bandwidth transfer is in
++	 * process of being queued */
++	uint8_t queuing_high_bandwidth;
++
++	/** Hardware Configuration -- stored here for convenience.*/
++	hwcfg1_data_t hwcfg1;
++	hwcfg2_data_t hwcfg2;
++	hwcfg3_data_t hwcfg3;
++	hwcfg4_data_t hwcfg4;
++	fifosize_data_t hptxfsiz;
++
++	/** Host and Device Configuration -- stored here for convenience.*/
++	hcfg_data_t hcfg;
++	dcfg_data_t dcfg;
++
++	/** The operational State, during transations
++	 * (a_host>>a_peripherial and b_device=>b_host) this may not
++	 * match the core but allows the software to determine
++	 * transitions.
++	 */
++	uint8_t op_state;
++
++	/**
++	 * Set to 1 if the HCD needs to be restarted on a session request
++	 * interrupt. This is required if no connector ID status change has
++	 * occurred since the HCD was last disconnected.
++	 */
++	uint8_t restart_hcd_on_session_req;
++
++	/** HCD callbacks */
++	/** A-Device is a_host */
++#define A_HOST		(1)
++	/** A-Device is a_suspend */
++#define A_SUSPEND	(2)
++	/** A-Device is a_peripherial */
++#define A_PERIPHERAL	(3)
++	/** B-Device is operating as a Peripheral. */
++#define B_PERIPHERAL	(4)
++	/** B-Device is operating as a Host. */
++#define B_HOST		(5)
++
++	/** HCD callbacks */
++	struct dwc_otg_cil_callbacks *hcd_cb;
++	/** PCD callbacks */
++	struct dwc_otg_cil_callbacks *pcd_cb;
++
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t p_tx_msk;
++	/** Device mode Periodic Tx FIFO Mask */
++	uint32_t tx_msk;
++
++	/** Workqueue object used for handling several interrupts */
++	dwc_workq_t *wq_otg;
++
++	/** Timer object used for handling "Wakeup Detected" Interrupt */
++	dwc_timer_t *wkp_timer;
++	/** This arrays used for debug purposes for DEV OUT NAK enhancement */
++	uint32_t start_doeptsiz_val[MAX_EPS_CHANNELS];
++	ep_xfer_info_t ep_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *ep_xfer_timer[MAX_EPS_CHANNELS];
++#ifdef DEBUG
++	uint32_t start_hcchar_val[MAX_EPS_CHANNELS];
++
++	hc_xfer_info_t hc_xfer_info[MAX_EPS_CHANNELS];
++	dwc_timer_t *hc_xfer_timer[MAX_EPS_CHANNELS];
++
++	uint32_t hfnum_7_samples;
++	uint64_t hfnum_7_frrem_accum;
++	uint32_t hfnum_0_samples;
++	uint64_t hfnum_0_frrem_accum;
++	uint32_t hfnum_other_samples;
++	uint64_t hfnum_other_frrem_accum;
++#endif
++
++#ifdef DWC_UTE_CFI
++	uint16_t pwron_rxfsiz;
++	uint16_t pwron_gnptxfsiz;
++	uint16_t pwron_txfsiz[15];
++
++	uint16_t init_rxfsiz;
++	uint16_t init_gnptxfsiz;
++	uint16_t init_txfsiz[15];
++#endif
++
++	/** Lx state of device */
++	dwc_otg_lx_state_e lx_state;
++
++	/** Saved Core Global registers */
++	struct dwc_otg_global_regs_backup *gr_backup;
++	/** Saved Host registers */
++	struct dwc_otg_host_regs_backup *hr_backup;
++	/** Saved Device registers */
++	struct dwc_otg_dev_regs_backup *dr_backup;
++
++	/** Power Down Enable */
++	uint32_t power_down;
++
++	/** ADP support Enable */
++	uint32_t adp_enable;
++
++	/** ADP structure object */
++	dwc_otg_adp_t adp;
++
++	/** hibernation/suspend flag */
++	int hibernation_suspend;
++
++	/** Device mode extended hibernation flag */
++	int xhib;
++
++	/** OTG revision supported */
++	uint32_t otg_ver;
++
++	/** OTG status flag used for HNP polling */
++	uint8_t otg_sts;
++
++	/** Pointer to either hcd->lock or pcd->lock */
++	dwc_spinlock_t *lock;
++
++	/** Start predict NextEP based on Learning Queue if equal 1,
++	 * also used as counter of disabled NP IN EP's */
++	uint8_t start_predict;
++
++	/** NextEp sequence, including EP0: nextep_seq[] = EP if non-periodic and
++	 * active, 0xff otherwise */
++	uint8_t nextep_seq[MAX_EPS_CHANNELS];
++
++	/** Index of fisrt EP in nextep_seq array which should be re-enabled **/
++	uint8_t first_in_nextep_seq;
++
++	/** Frame number while entering to ISR - needed for ISOCs **/
++	uint32_t frame_num;
++
++};
++
++#ifdef DEBUG
++/*
++ * This function is called when transfer is timed out.
++ */
++extern void hc_xfer_timeout(void *ptr);
++#endif
++
++/*
++ * This function is called when transfer is timed out on endpoint.
++ */
++extern void ep_xfer_timeout(void *ptr);
++
++/*
++ * The following functions are functions for works
++ * using during handling some interrupts
++ */
++extern void w_conn_id_status_change(void *p);
++
++extern void w_wakeup_detected(void *p);
++
++/** Saves global register values into system memory. */
++extern int dwc_otg_save_global_regs(dwc_otg_core_if_t * core_if);
++/** Saves device register values into system memory. */
++extern int dwc_otg_save_dev_regs(dwc_otg_core_if_t * core_if);
++/** Saves host register values into system memory. */
++extern int dwc_otg_save_host_regs(dwc_otg_core_if_t * core_if);
++/** Restore global register values. */
++extern int dwc_otg_restore_global_regs(dwc_otg_core_if_t * core_if);
++/** Restore host register values. */
++extern int dwc_otg_restore_host_regs(dwc_otg_core_if_t * core_if, int reset);
++/** Restore device register values. */
++extern int dwc_otg_restore_dev_regs(dwc_otg_core_if_t * core_if,
++				    int rem_wakeup);
++extern int restore_lpm_i2c_regs(dwc_otg_core_if_t * core_if);
++extern int restore_essential_regs(dwc_otg_core_if_t * core_if, int rmode,
++				  int is_host);
++
++extern int dwc_otg_host_hibernation_restore(dwc_otg_core_if_t * core_if,
++					    int restore_mode, int reset);
++extern int dwc_otg_device_hibernation_restore(dwc_otg_core_if_t * core_if,
++					      int rem_wakeup, int reset);
++
++/*
++ * The following functions support initialization of the CIL driver component
++ * and the DWC_otg controller.
++ */
++extern void dwc_otg_core_host_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_dev_init(dwc_otg_core_if_t * _core_if);
++
++/** @name Device CIL Functions
++ * The following functions support managing the DWC_otg controller in device
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_wakeup(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_read_setup_packet(dwc_otg_core_if_t * _core_if,
++				      uint32_t * _dest);
++extern uint32_t dwc_otg_get_frame_number(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_ep0_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_activate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_deactivate(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_ep_t * _ep);
++extern void dwc_otg_ep_start_zl_transfer(dwc_otg_core_if_t * _core_if,
++					 dwc_ep_t * _ep);
++extern void dwc_otg_ep0_start_transfer(dwc_otg_core_if_t * _core_if,
++				       dwc_ep_t * _ep);
++extern void dwc_otg_ep0_continue_transfer(dwc_otg_core_if_t * _core_if,
++					  dwc_ep_t * _ep);
++extern void dwc_otg_ep_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_ep_t * _ep, int _dma);
++extern void dwc_otg_ep_set_stall(dwc_otg_core_if_t * _core_if, dwc_ep_t * _ep);
++extern void dwc_otg_ep_clear_stall(dwc_otg_core_if_t * _core_if,
++				   dwc_ep_t * _ep);
++extern void dwc_otg_enable_device_interrupts(dwc_otg_core_if_t * _core_if);
++
++#ifdef DWC_EN_ISOC
++extern void dwc_otg_iso_ep_start_frm_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++extern void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++					      dwc_ep_t * ep);
++#endif /* DWC_EN_ISOC */
++/**@}*/
++
++/** @name Host CIL Functions
++ * The following functions support managing the DWC_otg controller in host
++ * mode.
++ */
++/**@{*/
++extern void dwc_otg_hc_init(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_halt(dwc_otg_core_if_t * _core_if,
++			    dwc_hc_t * _hc, dwc_otg_halt_status_e _halt_status);
++extern void dwc_otg_hc_cleanup(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_start_transfer(dwc_otg_core_if_t * _core_if,
++				      dwc_hc_t * _hc);
++extern int dwc_otg_hc_continue_transfer(dwc_otg_core_if_t * _core_if,
++					dwc_hc_t * _hc);
++extern void dwc_otg_hc_do_ping(dwc_otg_core_if_t * _core_if, dwc_hc_t * _hc);
++extern void dwc_otg_hc_write_packet(dwc_otg_core_if_t * _core_if,
++				    dwc_hc_t * _hc);
++extern void dwc_otg_enable_host_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_host_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_hc_start_transfer_ddma(dwc_otg_core_if_t * core_if,
++					   dwc_hc_t * hc);
++
++extern uint32_t calc_frame_interval(dwc_otg_core_if_t * core_if);
++
++/* Macro used to clear one channel interrupt */
++#define clear_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcint_data_t hcint_clear = {.d32 = 0}; \
++	hcint_clear.b._intr_ = 1; \
++	DWC_WRITE_REG32(&(_hc_regs_)->hcint, hcint_clear.d32); \
++} while (0)
++
++/*
++ * Macro used to disable one channel interrupt. Channel interrupts are
++ * disabled when the channel is halted or released by the interrupt handler.
++ * There is no need to handle further interrupts of that type until the
++ * channel is re-assigned. In fact, subsequent handling may cause crashes
++ * because the channel structures are cleaned up when the channel is released.
++ */
++#define disable_hc_int(_hc_regs_, _intr_) \
++do { \
++	hcintmsk_data_t hcintmsk = {.d32 = 0}; \
++	hcintmsk.b._intr_ = 1; \
++	DWC_MODIFY_REG32(&(_hc_regs_)->hcintmsk, hcintmsk.d32, 0); \
++} while (0)
++
++/**
++ * This function Reads HPRT0 in preparation to modify. It keeps the
++ * WC bits 0 so that if they are read as 1, they won't clear when you
++ * write it back
++ */
++static inline uint32_t dwc_otg_read_hprt0(dwc_otg_core_if_t * _core_if)
++{
++	hprt0_data_t hprt0;
++	hprt0.d32 = DWC_READ_REG32(_core_if->host_if->hprt0);
++	hprt0.b.prtena = 0;
++	hprt0.b.prtconndet = 0;
++	hprt0.b.prtenchng = 0;
++	hprt0.b.prtovrcurrchng = 0;
++	return hprt0.d32;
++}
++
++/**@}*/
++
++/** @name Common CIL Functions
++ * The following functions support managing the DWC_otg controller in either
++ * device or host mode.
++ */
++/**@{*/
++
++extern void dwc_otg_read_packet(dwc_otg_core_if_t * core_if,
++				uint8_t * dest, uint16_t bytes);
++
++extern void dwc_otg_flush_tx_fifo(dwc_otg_core_if_t * _core_if, const int _num);
++extern void dwc_otg_flush_rx_fifo(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_core_reset(dwc_otg_core_if_t * _core_if);
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_core_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gintsts) &
++		DWC_READ_REG32(&core_if->core_global_regs->gintmsk));
++}
++
++/**
++ * This function returns the OTG Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	return (DWC_READ_REG32(&core_if->core_global_regs->gotgint));
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the IN endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_in_ep_intr(dwc_otg_core_if_t *
++						       core_if)
++{
++
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++	return (v & 0xffff);
++}
++
++/**
++ * This function reads the Device All Endpoints Interrupt register and
++ * returns the OUT endpoint interrupt bits.
++ */
++static inline uint32_t dwc_otg_read_dev_all_out_ep_intr(dwc_otg_core_if_t *
++							core_if)
++{
++	uint32_t v;
++
++	if (core_if->multiproc_int_enable) {
++		v = DWC_READ_REG32(&core_if->dev_if->
++				   dev_global_regs->deachint) &
++		    DWC_READ_REG32(&core_if->
++				   dev_if->dev_global_regs->deachintmsk);
++	} else {
++		v = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daint) &
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->daintmsk);
++	}
++
++	return ((v & 0xffff0000) >> 16);
++}
++
++/**
++ * This function returns the Device IN EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_in_ep_intr(dwc_otg_core_if_t * core_if,
++						   dwc_ep_t * ep)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	uint32_t v, msk, emp;
++
++	if (core_if->multiproc_int_enable) {
++		msk =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->diepeachintmsk[ep->num]);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	} else {
++		msk = DWC_READ_REG32(&dev_if->dev_global_regs->diepmsk);
++		emp =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->dtknqr4_fifoemptymsk);
++		msk |= ((emp >> ep->num) & 0x1) << 7;
++		v = DWC_READ_REG32(&dev_if->in_ep_regs[ep->num]->diepint) & msk;
++	}
++
++	return v;
++}
++
++/**
++ * This function returns the Device OUT EP Interrupt register
++ */
++static inline uint32_t dwc_otg_read_dev_out_ep_intr(dwc_otg_core_if_t *
++						    _core_if, dwc_ep_t * _ep)
++{
++	dwc_otg_dev_if_t *dev_if = _core_if->dev_if;
++	uint32_t v;
++	doepmsk_data_t msk = {.d32 = 0 };
++
++	if (_core_if->multiproc_int_enable) {
++		msk.d32 =
++		    DWC_READ_REG32(&dev_if->
++				   dev_global_regs->doepeachintmsk[_ep->num]);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	} else {
++		msk.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->doepmsk);
++		if (_core_if->pti_enh_enable) {
++			msk.b.pktdrpsts = 1;
++		}
++		v = DWC_READ_REG32(&dev_if->
++				   out_ep_regs[_ep->num]->doepint) & msk.d32;
++	}
++	return v;
++}
++
++/**
++ * This function returns the Host All Channel Interrupt register
++ */
++static inline uint32_t dwc_otg_read_host_all_channels_intr(dwc_otg_core_if_t *
++							   _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->host_if->host_global_regs->haint));
++}
++
++static inline uint32_t dwc_otg_read_host_channel_intr(dwc_otg_core_if_t *
++						      _core_if, dwc_hc_t * _hc)
++{
++	return (DWC_READ_REG32
++		(&_core_if->host_if->hc_regs[_hc->hc_num]->hcint));
++}
++
++/**
++ * This function returns the mode of the operation, host or device.
++ *
++ * @return 0 - Device Mode, 1 - Host Mode
++ */
++static inline uint32_t dwc_otg_mode(dwc_otg_core_if_t * _core_if)
++{
++	return (DWC_READ_REG32(&_core_if->core_global_regs->gintsts) & 0x1);
++}
++
++/**@}*/
++
++/**
++ * DWC_otg CIL callback structure. This structure allows the HCD and
++ * PCD to register functions used for starting and stopping the PCD
++ * and HCD for role change on for a DRD.
++ */
++typedef struct dwc_otg_cil_callbacks {
++	/** Start function for role change */
++	int (*start) (void *_p);
++	/** Stop Function for role change */
++	int (*stop) (void *_p);
++	/** Disconnect Function for role change */
++	int (*disconnect) (void *_p);
++	/** Resume/Remote wakeup Function */
++	int (*resume_wakeup) (void *_p);
++	/** Suspend function */
++	int (*suspend) (void *_p);
++	/** Session Start (SRP) */
++	int (*session_start) (void *_p);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	/** Sleep (switch to L0 state) */
++	int (*sleep) (void *_p);
++#endif
++	/** Pointer passed to start() and stop() */
++	void *p;
++} dwc_otg_cil_callbacks_t;
++
++extern void dwc_otg_cil_register_pcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++extern void dwc_otg_cil_register_hcd_callbacks(dwc_otg_core_if_t * _core_if,
++					       dwc_otg_cil_callbacks_t * _cb,
++					       void *_p);
++
++void dwc_otg_initiate_srp(dwc_otg_core_if_t * core_if);
++
++//////////////////////////////////////////////////////////////////////
++/** Start the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->start) {
++		core_if->hcd_cb->start(core_if->hcd_cb->p);
++	}
++}
++
++/** Stop the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->stop) {
++		core_if->hcd_cb->stop(core_if->hcd_cb->p);
++	}
++}
++
++/** Disconnect the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_disconnect(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->disconnect) {
++		core_if->hcd_cb->disconnect(core_if->hcd_cb->p);
++	}
++}
++
++/** Inform the HCD the a New Session has begun.  Helper function for
++ * using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_session_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->session_start) {
++		core_if->hcd_cb->session_start(core_if->hcd_cb->p);
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * Inform the HCD about LPM sleep.
++ * Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_sleep(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->sleep) {
++		core_if->hcd_cb->sleep(core_if->hcd_cb->p);
++	}
++}
++#endif
++
++/** Resume the HCD.  Helper function for using the HCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_hcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->hcd_cb && core_if->hcd_cb->resume_wakeup) {
++		core_if->hcd_cb->resume_wakeup(core_if->hcd_cb->p);
++	}
++}
++
++/** Start the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_start(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->start) {
++		core_if->pcd_cb->start(core_if->pcd_cb->p);
++	}
++}
++
++/** Stop the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_stop(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->stop) {
++		core_if->pcd_cb->stop(core_if->pcd_cb->p);
++	}
++}
++
++/** Suspend the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_suspend(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->suspend) {
++		core_if->pcd_cb->suspend(core_if->pcd_cb->p);
++	}
++}
++
++/** Resume the PCD.  Helper function for using the PCD callbacks.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static inline void cil_pcd_resume(dwc_otg_core_if_t * core_if)
++{
++	if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++		core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++	}
++}
++
++//////////////////////////////////////////////////////////////////////
++
++#endif
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+new file mode 100644
+index 0000000..59fc862
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_cil_intr.c
+@@ -0,0 +1,1563 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_cil_intr.c $
++ * $Revision: #32 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ *
++ * The Core Interface Layer provides basic services for accessing and
++ * managing the DWC_otg hardware. These services are used by both the
++ * Host Controller Driver and the Peripheral Controller Driver.
++ *
++ * This file contains the Common Interrupt handlers.
++ */
++#include "dwc_os.h"
++#include "dwc_otg_regs.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_hcd.h"
++
++#ifdef DEBUG
++inline const char *op_state_str(dwc_otg_core_if_t * core_if)
++{
++	return (core_if->op_state == A_HOST ? "a_host" :
++		(core_if->op_state == A_SUSPEND ? "a_suspend" :
++		 (core_if->op_state == A_PERIPHERAL ? "a_peripheral" :
++		  (core_if->op_state == B_PERIPHERAL ? "b_peripheral" :
++		   (core_if->op_state == B_HOST ? "b_host" : "unknown")))));
++}
++#endif
++
++/** This function will log a debug message
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_mode_mismatch_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++	DWC_WARN("Mode Mismatch Interrupt: currently in %s mode\n",
++		 dwc_otg_mode(core_if) ? "Host" : "Device");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.modemismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function handles the OTG Interrupts. It reads the OTG
++ * Interrupt Register (GOTGINT) to determine what interrupt has
++ * occurred.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_otg_intr(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gotgint_data_t gotgint;
++	gotgctl_data_t gotgctl;
++	gintmsk_data_t gintmsk;
++	gpwrdn_data_t gpwrdn;
++
++	gotgint.d32 = DWC_READ_REG32(&global_regs->gotgint);
++	gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "++OTG Interrupt gotgint=%0x [%s]\n", gotgint.d32,
++		    op_state_str(core_if));
++
++	if (gotgint.b.sesenddet) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session End Detected++ (%s)\n",
++			    op_state_str(core_if));
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++
++		if (core_if->op_state == B_HOST) {
++			cil_pcd_start(core_if);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			/* If not B_HOST and Device HNP still set. HNP
++			 * Did not succeed!*/
++			if (gotgctl.b.devhnpen) {
++				DWC_DEBUGPL(DBG_ANY, "Session End Detected\n");
++				__DWC_ERROR("Device Not Connected/Responding!\n");
++			}
++
++			/* If Session End Detected the B-Cable has
++			 * been disconnected. */
++			/* Reset PCD and Gadget driver to a
++			 * clean state. */
++			core_if->lx_state = DWC_OTG_L0;
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			DWC_SPINLOCK(core_if->lock);
++
++			if (core_if->adp_enable) {
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, gpwrdn.d32, 0);
++				}
++
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_sense_start(core_if);
++			}
++		}
++
++		gotgctl.d32 = 0;
++		gotgctl.b.devhnpen = 1;
++		DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++	}
++	if (gotgint.b.sesreqsucstschng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Session Reqeust Success Status Change++\n");
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		if (gotgctl.b.sesreqscs) {
++
++			if ((core_if->core_params->phy_type ==
++			     DWC_PHY_TYPE_PARAM_FS) && (core_if->core_params->i2c_enable)) {
++				core_if->srp_success = 1;
++			} else {
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_resume(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				/* Clear Session Request */
++				gotgctl.d32 = 0;
++				gotgctl.b.sesreq = 1;
++				DWC_MODIFY_REG32(&global_regs->gotgctl,
++						 gotgctl.d32, 0);
++			}
++		}
++	}
++	if (gotgint.b.hstnegsucstschng) {
++		/* Print statements during the HNP interrupt handling
++		 * can cause it to fail.*/
++		gotgctl.d32 = DWC_READ_REG32(&global_regs->gotgctl);
++		/* WA for 3.00a- HW is not setting cur_mode, even sometimes
++		 * this does not help*/
++		if (core_if->snpsid >= OTG_CORE_REV_3_00a)
++			dwc_udelay(100);
++		if (gotgctl.b.hstnegscs) {
++			if (dwc_otg_is_host_mode(core_if)) {
++				core_if->op_state = B_HOST;
++				/*
++				 * Need to disable SOF interrupt immediately.
++				 * When switching from device to host, the PCD
++				 * interrupt handler won't handle the
++				 * interrupt if host mode is already set. The
++				 * HCD interrupt handler won't get called if
++				 * the HCD state is HALT. This means that the
++				 * interrupt does not get handled and Linux
++				 * complains loudly.
++				 */
++				gintmsk.d32 = 0;
++				gintmsk.b.sofintr = 1;
++				DWC_MODIFY_REG32(&global_regs->gintmsk,
++						 gintmsk.d32, 0);
++				/* Call callback function with spin lock released */
++				DWC_SPINUNLOCK(core_if->lock);
++				cil_pcd_stop(core_if);
++				/*
++				 * Initialize the Core for Host mode.
++				 */
++				cil_hcd_start(core_if);
++				DWC_SPINLOCK(core_if->lock);
++				core_if->op_state = B_HOST;
++			}
++		} else {
++			gotgctl.d32 = 0;
++			gotgctl.b.hnpreq = 1;
++			gotgctl.b.devhnpen = 1;
++			DWC_MODIFY_REG32(&global_regs->gotgctl, gotgctl.d32, 0);
++			DWC_DEBUGPL(DBG_ANY, "HNP Failed\n");
++			__DWC_ERROR("Device Not Connected/Responding\n");
++		}
++	}
++	if (gotgint.b.hstnegdet) {
++		/* The disconnect interrupt is set at the same time as
++		 * Host Negotiation Detected.  During the mode
++		 * switch all interrupts are cleared so the disconnect
++		 * interrupt handler will not get executed.
++		 */
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "Host Negotiation Detected++ (%s)\n",
++			    (dwc_otg_is_host_mode(core_if) ? "Host" :
++			     "Device"));
++		if (dwc_otg_is_device_mode(core_if)) {
++			DWC_DEBUGPL(DBG_ANY, "a_suspend->a_peripheral (%d)\n",
++				    core_if->op_state);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_PERIPHERAL;
++		} else {
++			/*
++			 * Need to disable SOF interrupt immediately. When
++			 * switching from device to host, the PCD interrupt
++			 * handler won't handle the interrupt if host mode is
++			 * already set. The HCD interrupt handler won't get
++			 * called if the HCD state is HALT. This means that
++			 * the interrupt does not get handled and Linux
++			 * complains loudly.
++			 */
++			gintmsk.d32 = 0;
++			gintmsk.b.sofintr = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, gintmsk.d32, 0);
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++	if (gotgint.b.adevtoutchng) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: "
++			    "A-Device Timeout Change++\n");
++	}
++	if (gotgint.b.debdone) {
++		DWC_DEBUGPL(DBG_ANY, " ++OTG Interrupt: " "Debounce Done++\n");
++	}
++
++	/* Clear GOTGINT */
++	DWC_WRITE_REG32(&core_if->core_global_regs->gotgint, gotgint.d32);
++
++	return 1;
++}
++
++void w_conn_id_status_change(void *p)
++{
++	dwc_otg_core_if_t *core_if = p;
++	uint32_t count = 0;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	gotgctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl=%0x\n", gotgctl.d32);
++	DWC_DEBUGPL(DBG_CIL, "gotgctl.b.conidsts=%d\n", gotgctl.b.conidsts);
++
++	/* B-Device connector (Device Mode) */
++	if (gotgctl.b.conidsts) {
++		/* Wait for switch to device mode. */
++		while (!dwc_otg_is_device_mode(core_if)) {
++			DWC_PRINTF("Waiting for Peripheral Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		/* A-Device connector (Host Mode) */
++		while (!dwc_otg_is_host_mode(core_if)) {
++			DWC_PRINTF("Waiting for Host Mode, Mode=%s\n",
++				   (dwc_otg_is_host_mode(core_if) ? "Host" :
++				    "Peripheral"));
++			dwc_mdelay(100);
++			if (++count > 10000)
++				break;
++		}
++		DWC_ASSERT(++count < 10000,
++			   "Connection id status change timed out");
++		core_if->op_state = A_HOST;
++		/*
++		 * Initialize the Core for Host mode.
++		 */
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++}
++
++/**
++ * This function handles the Connector ID Status Change Interrupt.  It
++ * reads the OTG Interrupt Register (GOTCTL) to determine whether this
++ * is a Device to Host Mode transition or a Host Mode to Device
++ * Transition.
++ *
++ * This only occurs when the cable is connected/removed from the PHY
++ * connector.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_conn_id_status_change_intr(dwc_otg_core_if_t * core_if)
++{
++
++	/*
++	 * Need to disable SOF interrupt immediately. If switching from device
++	 * to host, the PCD interrupt handler won't handle the interrupt if
++	 * host mode is already set. The HCD interrupt handler won't get
++	 * called if the HCD state is HALT. This means that the interrupt does
++	 * not get handled and Linux complains loudly.
++	 */
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++	gintsts_data_t gintsts = {.d32 = 0 };
++
++	gintmsk.b.sofintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	DWC_DEBUGPL(DBG_CIL,
++		    " ++Connector ID Status Change Interrupt++  (%s)\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"));
++
++	DWC_SPINUNLOCK(core_if->lock);
++
++	/*
++	 * Need to schedule a work, as there are possible DELAY function calls
++	 * Release lock before scheduling workq as it holds spinlock during scheduling
++	 */
++
++	DWC_WORKQ_SCHEDULE(core_if->wq_otg, w_conn_id_status_change,
++			   core_if, "connection id status change");
++	DWC_SPINLOCK(core_if->lock);
++
++	/* Set flag and clear interrupt */
++	gintsts.b.conidstschng = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device is initiating the Session
++ * Request Protocol to request the host to turn on bus power so a new
++ * session can begin. The handler responds by turning on bus power. If
++ * the DWC_otg controller is in low power mode, the handler brings the
++ * controller out of low power mode before turning on bus power.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++int32_t dwc_otg_handle_session_req_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++#ifndef DWC_HOST_ONLY
++	DWC_DEBUGPL(DBG_ANY, "++Session Request Interrupt++\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_PRINTF("SRP: Device mode\n");
++	} else {
++		hprt0_data_t hprt0;
++		DWC_PRINTF("SRP: Host mode\n");
++
++		/* Turn on the port power bit. */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtpwr = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++		/* Start the Connection timer. So a message can be displayed
++		 * if connect does not occur within 10 seconds. */
++		cil_hcd_session_start(core_if);
++	}
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sessreqintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++void w_wakeup_detected(void *p)
++{
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) p;
++	/*
++	 * Clear the Resume after 70ms. (Need 20 ms minimum. Use 70 ms
++	 * so that OPT tests pass with all PHYs).
++	 */
++	hprt0_data_t hprt0 = {.d32 = 0 };
++#if 0
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	/* Restart the Phy Clock */
++	pcgcctl.b.stoppclk = 1;
++	DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++	dwc_udelay(10);
++#endif //0
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	DWC_DEBUGPL(DBG_ANY, "Resume: HPRT0=%0x\n", hprt0.d32);
++//      dwc_mdelay(70);
++	hprt0.b.prtres = 0;	/* Resume */
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	DWC_DEBUGPL(DBG_ANY, "Clear Resume: HPRT0=%0x\n",
++		    DWC_READ_REG32(core_if->host_if->hprt0));
++
++	cil_hcd_resume(core_if);
++
++	/** Change to L0 state*/
++	core_if->lx_state = DWC_OTG_L0;
++}
++
++/**
++ * This interrupt indicates that the DWC_otg controller has detected a
++ * resume or remote wakeup sequence. If the DWC_otg controller is in
++ * low power mode, the handler must brings the controller out of low
++ * power mode. The controller automatically begins resume
++ * signaling. The handler schedules a time to stop resume signaling.
++ */
++int32_t dwc_otg_handle_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Resume and Remote Wakeup Detected Interrupt++\n");
++
++	DWC_PRINTF("%s lxstate = %d\n", __func__, core_if->lx_state);
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl_data_t dctl = {.d32 = 0 };
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n",
++			    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->
++					   dsts));
++		if (core_if->lx_state == DWC_OTG_L2) {
++#ifdef PARTIAL_POWER_DOWN
++			if (core_if->hwcfg4.b.power_optimiz) {
++				pcgcctl_data_t power = {.d32 = 0 };
++
++				power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++				DWC_DEBUGPL(DBG_CIL, "PCGCCTL=%0x\n",
++					    power.d32);
++
++				power.b.stoppclk = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.pwrclmp = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++				power.b.rstpdwnmodule = 0;
++				DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++			}
++#endif
++			/* Clear the Remote Wakeup Signaling */
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++
++			DWC_SPINUNLOCK(core_if->lock);
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++			DWC_SPINLOCK(core_if->lock);
++		} else {
++			glpmcfg_data_t lpmcfg;
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			lpmcfg.b.hird_thres &= (~(1 << 4));
++			DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++					lpmcfg.d32);
++		}
++		/** Change to L0 state*/
++		core_if->lx_state = DWC_OTG_L0;
++	} else {
++		if (core_if->lx_state != DWC_OTG_L1) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++
++			/* Restart the Phy Clock */
++			pcgcctl.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++			DWC_TIMER_SCHEDULE(core_if->wkp_timer, 71);
++		} else {
++			/** Change to L0 state*/
++			core_if->lx_state = DWC_OTG_L0;
++		}
++	}
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.wkupintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * Device disconnect.
++ */
++static int32_t dwc_otg_handle_pwrdn_disconnect_intr(dwc_otg_core_if_t *core_if)
++{
++	gpwrdn_data_t gpwrdn = { .d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = { .d32 = 0 };
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps*/
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	if (gpwrdn_temp.b.idsts) {
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++	} else {
++		core_if->op_state = A_HOST;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_hcd_start(core_if);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * remote wakeup sequence.
++ */
++static int32_t dwc_otg_handle_pwrdn_wakeup_detected_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	DWC_DEBUGPL(DBG_ANY,
++		    "++Powerdown Remote Wakeup Detected Interrupt++\n");
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (gpwrdn.b.idsts) {	// Device Mode
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_device_hibernation_restore(core_if, 0, 0);
++		}
++	} else {
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			dwc_otg_host_hibernation_restore(core_if, 1, 0);
++		}
++	}
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_idsts_change(dwc_otg_device_t *otg_dev)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++	gpwrdn_temp.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++		DWC_DEBUGPL(DBG_ANY, "Exit from hibernation on ID sts change\n");
++		/* Switch on the voltage to the core */
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		gpwrdn.d32 = core_if->gr_backup->gpwrdn_local;
++		if (gpwrdn.b.dis_vbus == 1) {
++			gpwrdn.d32 = 0;
++			gpwrdn.b.dis_vbus = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		}
++
++		if (gpwrdn_temp.b.idsts) {
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		} else {
++			core_if->op_state = A_HOST;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_hcd_start(core_if);
++		}
++	}
++
++	if (core_if->adp_enable) {
++		uint8_t is_host = 0;
++		DWC_SPINUNLOCK(core_if->lock);
++		/* Change the core_if's lock to hcd/pcd lock depend on mode? */
++#ifndef DWC_HOST_ONLY
++		if (gpwrdn_temp.b.idsts)
++			core_if->lock = otg_dev->pcd->lock;
++#endif
++#ifndef DWC_DEVICE_ONLY
++		if (!gpwrdn_temp.b.idsts) {
++				core_if->lock = otg_dev->hcd->lock;
++				is_host = 1;
++		}
++#endif
++		DWC_PRINTF("RESTART ADP\n");
++		if (core_if->adp.probe_enabled)
++			dwc_otg_adp_probe_stop(core_if);
++		if (core_if->adp.sense_enabled)
++			dwc_otg_adp_sense_stop(core_if);
++		if (core_if->adp.sense_timer_started)
++			DWC_TIMER_CANCEL(core_if->adp.sense_timer);
++		if (core_if->adp.vbuson_timer_started)
++			DWC_TIMER_CANCEL(core_if->adp.vbuson_timer);
++		core_if->adp.probe_timer_values[0] = -1;
++		core_if->adp.probe_timer_values[1] = -1;
++		core_if->adp.sense_timer_started = 0;
++		core_if->adp.vbuson_timer_started = 0;
++		core_if->adp.probe_counter = 0;
++		core_if->adp.gpwrdn = 0;
++
++		/* Disable PMU and restart ADP */
++		gpwrdn_temp.d32 = 0;
++		gpwrdn_temp.b.pmuactv = 1;
++		gpwrdn_temp.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		DWC_PRINTF("Check point 1\n");
++		dwc_mdelay(110);
++		dwc_otg_adp_start(core_if, is_host);
++		DWC_SPINLOCK(core_if->lock);
++	}
++
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_pwrdn_session_change(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (core_if->power_down == 2) {
++		if (!core_if->hibernation_suspend) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		}
++
++		if ((otg_cap_param != DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			 otg_cap_param != DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) &&
++			gpwrdn.b.bsessvld == 0) {
++			/* Save gpwrdn register for further usage if stschng interrupt */
++			core_if->gr_backup->gpwrdn_local =
++				DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++			/*Exit from ISR and wait for stschng interrupt with bsessvld = 1 */
++			return 1;
++		}
++
++		/* Switch on the voltage to the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnswtch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Reset the core */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/* Disable power clamps */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnclmp = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++		/* Remove reset the core signal */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pwrdnrstn = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++		dwc_udelay(10);
++
++		/* Disable PMU interrupt */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuintsel = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		/*Indicates that we are exiting from hibernation */
++		core_if->hibernation_suspend = 0;
++
++		/* Disable PMU */
++		gpwrdn.d32 = 0;
++		gpwrdn.b.pmuactv = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++		dwc_udelay(10);
++
++		core_if->op_state = B_PERIPHERAL;
++		dwc_otg_core_init(core_if);
++		dwc_otg_enable_global_interrupts(core_if);
++		cil_pcd_start(core_if);
++
++		if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE ||
++			otg_cap_param == DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE) {
++			/*
++			 * Initiate SRP after initial ADP probe.
++			 */
++			dwc_otg_initiate_srp(core_if);
++		}
++	}
++
++	return 1;
++}
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * status change either on IDDIG or BSessVld.
++ */
++static uint32_t dwc_otg_handle_pwrdn_stschng_intr(dwc_otg_device_t *otg_dev)
++{
++	int retval;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	gpwrdn_data_t gpwrdn_temp = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (core_if->power_down == 2) {
++		if (core_if->hibernation_suspend <= 0) {
++			DWC_PRINTF("Already exited from Hibernation\n");
++			return 1;
++		} else
++			gpwrdn_temp.d32 = core_if->gr_backup->gpwrdn_local;
++
++	} else {
++		gpwrdn_temp.d32 = core_if->adp.gpwrdn;
++	}
++
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++	if (gpwrdn.b.idsts ^ gpwrdn_temp.b.idsts) {
++		retval = dwc_otg_handle_pwrdn_idsts_change(otg_dev);
++	} else if (gpwrdn.b.bsessvld ^ gpwrdn_temp.b.bsessvld) {
++		retval = dwc_otg_handle_pwrdn_session_change(core_if);
++	}
++
++	return retval;
++}
++
++/**
++ * This interrupt indicates that the Wakeup Logic has detected a
++ * SRP.
++ */
++static int32_t dwc_otg_handle_pwrdn_srp_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return 1;
++	}
++#ifdef DWC_DEV_SRPCAP
++	if (core_if->pwron_timer_started) {
++		core_if->pwron_timer_started = 0;
++		DWC_TIMER_CANCEL(core_if->pwron_timer);
++	}
++#endif
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Indicates that we are exiting from hibernation */
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Programm Disable VBUS to 0 */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/*Initialize the core as Host */
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++
++	return 1;
++}
++
++/** This interrupt indicates that restore command after Hibernation
++ * was completed by the core. */
++int32_t dwc_otg_handle_restore_done_intr(dwc_otg_core_if_t * core_if)
++{
++	pcgcctl_data_t pcgcctl;
++	DWC_DEBUGPL(DBG_ANY, "++Restore Done Interrupt++\n");
++
++	//TODO De-assert restore signal. 8.a
++	pcgcctl.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (pcgcctl.b.restoremode == 1) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		/*
++		 * If restore mode is Remote Wakeup,
++		 * unmask Remote Wakeup interrupt.
++		 */
++		gintmsk.b.wkupintr = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 0, gintmsk.d32);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that a device has been disconnected from
++ * the root port.
++ */
++int32_t dwc_otg_handle_disconnect_intr(dwc_otg_core_if_t * core_if)
++{
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_ANY, "++Disconnect Detected Interrupt++ (%s) %s\n",
++		    (dwc_otg_is_host_mode(core_if) ? "Host" : "Device"),
++		    op_state_str(core_if));
++
++/** @todo Consolidate this if statement. */
++#ifndef DWC_HOST_ONLY
++	if (core_if->op_state == B_HOST) {
++		/* If in device mode Disconnect and stop the HCD, then
++		 * start the PCD. */
++		DWC_SPINUNLOCK(core_if->lock);
++		cil_hcd_disconnect(core_if);
++		cil_pcd_start(core_if);
++		DWC_SPINLOCK(core_if->lock);
++		core_if->op_state = B_PERIPHERAL;
++	} else if (dwc_otg_is_device_mode(core_if)) {
++		gotgctl_data_t gotgctl = {.d32 = 0 };
++		gotgctl.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->gotgctl);
++		if (gotgctl.b.hstsethnpen == 1) {
++			/* Do nothing, if HNP in process the OTG
++			 * interrupt "Host Negotiation Detected"
++			 * interrupt will do the mode switch.
++			 */
++		} else if (gotgctl.b.devhnpen == 0) {
++			/* If in device mode Disconnect and stop the HCD, then
++			 * start the PCD. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_hcd_disconnect(core_if);
++			cil_pcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = B_PERIPHERAL;
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "!a_peripheral && !devhnpen\n");
++		}
++	} else {
++		if (core_if->op_state == A_HOST) {
++			/* A-Cable still connected but device disconnected. */
++			cil_hcd_disconnect(core_if);
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn = { .d32 = 0 };
++				cil_hcd_stop(core_if);
++				/* Enable Power Down Logic */
++				gpwrdn.b.pmuintsel = 1;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_otg_adp_probe_start(core_if);
++
++				/* Power off the core */
++				if (core_if->power_down == 2) {
++					gpwrdn.d32 = 0;
++					gpwrdn.b.pwrdnswtch = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gpwrdn,
++					     gpwrdn.d32, 0);
++				}
++			}
++		}
++	}
++#endif
++	/* Change to L3(OFF) state */
++	core_if->lx_state = DWC_OTG_L3;
++
++	gintsts.d32 = 0;
++	gintsts.b.disconnect = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that SUSPEND state has been detected on
++ * the USB.
++ *
++ * For HNP the USB Suspend interrupt signals the change from
++ * "a_peripheral" to "a_host".
++ *
++ * When power management is enabled the core will be put in low power
++ * mode.
++ */
++int32_t dwc_otg_handle_usb_suspend_intr(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	gintsts_data_t gintsts;
++	dcfg_data_t dcfg;
++
++	DWC_DEBUGPL(DBG_ANY, "USB SUSPEND\n");
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		/* Check the Device status register to determine if the Suspend
++		 * state is active. */
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++		DWC_DEBUGPL(DBG_PCD, "DSTS=0x%0x\n", dsts.d32);
++		DWC_DEBUGPL(DBG_PCD, "DSTS.Suspend Status=%d "
++			    "HWCFG4.power Optimize=%d\n",
++			    dsts.b.suspsts, core_if->hwcfg4.b.power_optimiz);
++
++#ifdef PARTIAL_POWER_DOWN
++/** @todo Add a module parameter for power management. */
++
++		if (dsts.b.suspsts && core_if->hwcfg4.b.power_optimiz) {
++			pcgcctl_data_t power = {.d32 = 0 };
++			DWC_DEBUGPL(DBG_CIL, "suspend\n");
++
++			power.b.pwrclmp = 1;
++			DWC_WRITE_REG32(core_if->pcgcctl, power.d32);
++
++			power.b.rstpdwnmodule = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++			power.b.stoppclk = 1;
++			DWC_MODIFY_REG32(core_if->pcgcctl, 0, power.d32);
++
++		} else {
++			DWC_DEBUGPL(DBG_ANY, "disconnect?\n");
++		}
++#endif
++		/* PCD callback for suspend. Release the lock inside of callback function */
++		cil_pcd_suspend(core_if);
++		if (core_if->power_down == 2)
++		{
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY,"lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY," device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++
++				/* Change to L2(suspend) state */
++				core_if->lx_state = DWC_OTG_L2;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, gintsts.d32);
++				DWC_PRINTF("Start of hibernation completed\n");
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++				}
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				/* Enable interrupts from wake up logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Unmask device mode interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.rst_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++							DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				DWC_PRINTF("Hibernation completed\n");
++
++				return 1;
++			}
++		} else if (core_if->power_down == 3) {
++			pcgcctl_data_t pcgcctl = {.d32 = 0 };
++			dcfg.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dcfg);
++			DWC_DEBUGPL(DBG_ANY, "lx_state = %08x\n",core_if->lx_state);
++			DWC_DEBUGPL(DBG_ANY, " device address = %08d\n",dcfg.b.devaddr);
++
++			if (core_if->lx_state != DWC_OTG_L3 && dcfg.b.devaddr) {
++				DWC_DEBUGPL(DBG_ANY, "Start entering to extended hibernation\n");
++				core_if->xhib = 1;
++
++				/* Clear interrupt in gintsts */
++				gintsts.d32 = 0;
++				gintsts.b.usbsuspend = 1;
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++					gintsts, gintsts.d32);
++
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_dev_regs(core_if);
++
++				/* Wait for 10 PHY clocks */
++				dwc_udelay(10);
++
++				/* Program GPIO register while entering to xHib */
++				DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x1);
++
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_pwrclmp = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.extnd_hiber_switch = 1;
++				core_if->gr_backup->xhib_gpwrdn = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++				core_if->gr_backup->xhib_pcgcctl = DWC_READ_REG32(core_if->pcgcctl) | pcgcctl.d32;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++
++				DWC_DEBUGPL(DBG_ANY, "Finished entering to extended hibernation\n");
++
++				return 1;
++			}
++		}
++	} else {
++		if (core_if->op_state == A_PERIPHERAL) {
++			DWC_DEBUGPL(DBG_ANY, "a_peripheral->a_host\n");
++			/* Clear the a_peripheral flag, back to a_host. */
++			DWC_SPINUNLOCK(core_if->lock);
++			cil_pcd_stop(core_if);
++			cil_hcd_start(core_if);
++			DWC_SPINLOCK(core_if->lock);
++			core_if->op_state = A_HOST;
++		}
++	}
++
++	/* Change to L2(suspend) state */
++	core_if->lx_state = DWC_OTG_L2;
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbsuspend = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++static int32_t dwc_otg_handle_xhib_exit_intr(dwc_otg_core_if_t * core_if)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++
++	dwc_udelay(10);
++
++	/* Program GPIO register while entering to xHib */
++	DWC_WRITE_REG32(&core_if->core_global_regs->ggpio, 0x0);
++
++	pcgcctl.d32 = core_if->gr_backup->xhib_pcgcctl;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	gpwrdn.d32 = core_if->gr_backup->xhib_gpwrdn;
++	gpwrdn.b.restore = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32);
++	dwc_udelay(10);
++
++	restore_lpm_i2c_regs(core_if);
++
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 0;
++	pcgcctl.b.extnd_hiber_switch = 0;
++	pcgcctl.b.extnd_hiber_pwrclmp = 0;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	gahbcfg.d32 = core_if->gr_backup->gahbcfg_local;
++	gahbcfg.b.glblintrmsk = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gahbcfg, gahbcfg.d32);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, 0xFFFFFFFF);
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, 0x1 << 16);
++
++	DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg,
++			core_if->gr_backup->gusbcfg_local);
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg,
++			core_if->dr_backup->dcfg);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.d32 |= 0x608;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++	dwc_udelay(10);
++
++	pcgcctl.d32 = 0;
++	pcgcctl.d32 = core_if->gr_backup->pcgcctl_local & (0x3FFFF << 14);
++	pcgcctl.b.max_xcvrselect = 1;
++	pcgcctl.b.ess_reg_restored = 1;
++	pcgcctl.b.enbl_extnd_hiber = 1;
++	pcgcctl.b.rstpdwnmodule = 1;
++	pcgcctl.b.restoremode = 1;
++	DWC_WRITE_REG32(core_if->pcgcctl, pcgcctl.d32);
++
++	DWC_DEBUGPL(DBG_ANY, "%s called\n", __FUNCTION__);
++
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function hadles LPM transaction received interrupt.
++ */
++static int32_t dwc_otg_handle_lpm_intr(dwc_otg_core_if_t * core_if)
++{
++	glpmcfg_data_t lpmcfg;
++	gintsts_data_t gintsts;
++
++	if (!core_if->core_params->lpm_enable) {
++		DWC_PRINTF("Unexpected LPM interrupt\n");
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	DWC_PRINTF("LPM config register = 0x%08x\n", lpmcfg.d32);
++
++	if (dwc_otg_is_host_mode(core_if)) {
++		cil_hcd_sleep(core_if);
++	} else {
++		lpmcfg.b.hird_thres |= (1 << 4);
++		DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg,
++				lpmcfg.d32);
++	}
++
++	/* Examine prt_sleep_sts after TL1TokenTetry period max (10 us) */
++	dwc_udelay(10);
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	if (lpmcfg.b.prt_sleep_sts) {
++		/* Save the current state */
++		core_if->lx_state = DWC_OTG_L1;
++	}
++
++	/* Clear interrupt  */
++	gintsts.d32 = 0;
++	gintsts.b.lpmtranrcvd = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++	return 1;
++}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++/**
++ * This function returns the Core Interrupt register.
++ */
++static inline uint32_t dwc_otg_read_common_intr(dwc_otg_core_if_t * core_if)
++{
++	gahbcfg_data_t gahbcfg = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk;
++	gintmsk_data_t gintmsk_common = {.d32 = 0 };
++	gintmsk_common.b.wkupintr = 1;
++	gintmsk_common.b.sessreqintr = 1;
++	gintmsk_common.b.conidstschng = 1;
++	gintmsk_common.b.otgintr = 1;
++	gintmsk_common.b.modemismatch = 1;
++	gintmsk_common.b.disconnect = 1;
++	gintmsk_common.b.usbsuspend = 1;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	gintmsk_common.b.lpmtranrcvd = 1;
++#endif
++	gintmsk_common.b.restoredone = 1;
++	/** @todo: The port interrupt occurs while in device
++         * mode. Added code to CIL to clear the interrupt for now!
++         */
++	gintmsk_common.b.portintr = 1;
++
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	gintmsk.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gahbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gahbcfg);
++
++#ifdef DEBUG
++	/* if any common interrupts set */
++	if (gintsts.d32 & gintmsk_common.d32) {
++		DWC_DEBUGPL(DBG_ANY, "gintsts=%08x  gintmsk=%08x\n",
++			    gintsts.d32, gintmsk.d32);
++	}
++#endif
++	if (gahbcfg.b.glblintrmsk)
++		return ((gintsts.d32 & gintmsk.d32) & gintmsk_common.d32);
++	else
++		return 0;
++
++}
++
++/* MACRO for clearing interupt bits in GPWRDN register */
++#define CLEAR_GPWRDN_INTR(__core_if,__intr) \
++do { \
++		gpwrdn_data_t gpwrdn = {.d32=0}; \
++		gpwrdn.b.__intr = 1; \
++		DWC_MODIFY_REG32(&__core_if->core_global_regs->gpwrdn, \
++		0, gpwrdn.d32); \
++} while (0)
++
++/**
++ * Common interrupt handler.
++ *
++ * The common interrupts are those that occur in both Host and Device mode.
++ * This handler handles the following interrupts:
++ * - Mode Mismatch Interrupt
++ * - Disconnect Interrupt
++ * - OTG Interrupt
++ * - Connector ID Status Change Interrupt
++ * - Session Request Interrupt.
++ * - Resume / Remote Wakeup Detected Interrupt.
++ * - LPM Transaction Received Interrupt
++ * - ADP Transaction Received Interrupt
++ *
++ */
++int32_t dwc_otg_handle_common_intr(void *dev)
++{
++	int retval = 0;
++	gintsts_data_t gintsts;
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_device_t *otg_dev = dev;
++	dwc_otg_core_if_t *core_if = otg_dev->core_if;
++	gpwrdn.d32 = DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++	if (dwc_otg_is_device_mode(core_if))
++		core_if->frame_num = dwc_otg_get_frame_number(core_if);
++
++	if (core_if->lock)
++		DWC_SPINLOCK(core_if->lock);
++
++	if (core_if->power_down == 3 && core_if->xhib == 1) {
++		DWC_DEBUGPL(DBG_ANY, "Exiting from xHIB state\n");
++		retval |= dwc_otg_handle_xhib_exit_intr(core_if);
++		core_if->xhib = 2;
++		if (core_if->lock)
++			DWC_SPINUNLOCK(core_if->lock);
++
++		return retval;
++	}
++
++	if (core_if->hibernation_suspend <= 0) {
++		gintsts.d32 = dwc_otg_read_common_intr(core_if);
++
++		if (gintsts.b.modemismatch) {
++			retval |= dwc_otg_handle_mode_mismatch_intr(core_if);
++		}
++		if (gintsts.b.otgintr) {
++			retval |= dwc_otg_handle_otg_intr(core_if);
++		}
++		if (gintsts.b.conidstschng) {
++			retval |=
++			    dwc_otg_handle_conn_id_status_change_intr(core_if);
++		}
++		if (gintsts.b.disconnect) {
++			retval |= dwc_otg_handle_disconnect_intr(core_if);
++		}
++		if (gintsts.b.sessreqintr) {
++			retval |= dwc_otg_handle_session_req_intr(core_if);
++		}
++		if (gintsts.b.wkupintr) {
++			retval |= dwc_otg_handle_wakeup_detected_intr(core_if);
++		}
++		if (gintsts.b.usbsuspend) {
++			retval |= dwc_otg_handle_usb_suspend_intr(core_if);
++		}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (gintsts.b.lpmtranrcvd) {
++			retval |= dwc_otg_handle_lpm_intr(core_if);
++		}
++#endif
++		if (gintsts.b.restoredone) {
++			gintsts.d32 = 0;
++	                if (core_if->power_down == 2)
++				core_if->hibernation_suspend = -1;
++			else if (core_if->power_down == 3 && core_if->xhib == 2) {
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				dctl_data_t dctl = {.d32 = 0 };
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->
++						gintsts, 0xFFFFFFFF);
++
++				DWC_DEBUGPL(DBG_ANY,
++					    "RESTORE DONE generated\n");
++
++				gpwrdn.b.restore = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.b.rstpdwnmodule = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				DWC_WRITE_REG32(&core_if->core_global_regs->gusbcfg, core_if->gr_backup->gusbcfg_local);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dcfg, core_if->dr_backup->dcfg);
++				DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, core_if->dr_backup->dctl);
++				dwc_udelay(50);
++
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++				dwc_udelay(10);
++
++				dwc_otg_restore_global_regs(core_if);
++				dwc_otg_restore_dev_regs(core_if, 0);
++
++				dctl.d32 = 0;
++				dctl.b.pwronprgdone = 1;
++				DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++				dwc_udelay(10);
++
++				pcgcctl.d32 = 0;
++				pcgcctl.b.enbl_extnd_hiber = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++
++				/* The core will be in ON STATE */
++				core_if->lx_state = DWC_OTG_L0;
++				core_if->xhib = 0;
++
++				DWC_SPINUNLOCK(core_if->lock);
++				if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++					core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++				}
++				DWC_SPINLOCK(core_if->lock);
++
++			}
++
++			gintsts.b.restoredone = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			DWC_PRINTF(" --Restore done interrupt received-- \n");
++			retval |= 1;
++		}
++		if (gintsts.b.portintr && dwc_otg_is_device_mode(core_if)) {
++			/* The port interrupt occurs while in device mode with HPRT0
++			 * Port Enable/Disable.
++			 */
++			gintsts.d32 = 0;
++			gintsts.b.portintr = 1;
++			DWC_WRITE_REG32(&core_if->core_global_regs->gintsts,gintsts.d32);
++			retval |= 1;
++
++		}
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "gpwrdn=%08x\n", gpwrdn.d32);
++
++		if (gpwrdn.b.disconn_det && gpwrdn.b.disconn_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, disconn_det);
++			if (gpwrdn.b.linestate == 0) {
++				dwc_otg_handle_pwrdn_disconnect_intr(core_if);
++			} else {
++				DWC_PRINTF("Disconnect detected while linestate is not 0\n");
++			}
++
++			retval |= 1;
++		}
++		if (gpwrdn.b.lnstschng && gpwrdn.b.lnstchng_msk) {
++			CLEAR_GPWRDN_INTR(core_if, lnstschng);
++			/* remote wakeup from hibernation */
++			if (gpwrdn.b.linestate == 2 || gpwrdn.b.linestate == 1) {
++				dwc_otg_handle_pwrdn_wakeup_detected_intr(core_if);
++			} else {
++				DWC_PRINTF("gpwrdn.linestate = %d\n", gpwrdn.b.linestate);
++			}
++			retval |= 1;
++		}
++		if (gpwrdn.b.rst_det && gpwrdn.b.rst_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, rst_det);
++			if (gpwrdn.b.linestate == 0) {
++				DWC_PRINTF("Reset detected\n");
++				retval |= dwc_otg_device_hibernation_restore(core_if, 0, 1);
++			}
++		}
++		if (gpwrdn.b.srp_det && gpwrdn.b.srp_det_msk) {
++			CLEAR_GPWRDN_INTR(core_if, srp_det);
++			dwc_otg_handle_pwrdn_srp_intr(core_if);
++			retval |= 1;
++		}
++	}
++	/* Handle ADP interrupt here */
++	if (gpwrdn.b.adp_int) {
++		DWC_PRINTF("ADP interrupt\n");
++		CLEAR_GPWRDN_INTR(core_if, adp_int);
++		dwc_otg_adp_handle_intr(core_if);
++		retval |= 1;
++	}
++	if (gpwrdn.b.sts_chngint && gpwrdn.b.sts_chngint_msk) {
++		DWC_PRINTF("STS CHNG interrupt asserted\n");
++		CLEAR_GPWRDN_INTR(core_if, sts_chngint);
++		dwc_otg_handle_pwrdn_stschng_intr(otg_dev);
++
++		retval |= 1;
++	}
++	if (core_if->lock)
++		DWC_SPINUNLOCK(core_if->lock);
++
++	return retval;
++}
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_core_if.h b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
+new file mode 100644
+index 0000000..4138fd1
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_core_if.h
+@@ -0,0 +1,705 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_core_if.h $
++ * $Revision: #13 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#if !defined(__DWC_CORE_IF_H__)
++#define __DWC_CORE_IF_H__
++
++#include "dwc_os.h"
++
++/** @file
++ * This file defines DWC_OTG Core API
++ */
++
++struct dwc_otg_core_if;
++typedef struct dwc_otg_core_if dwc_otg_core_if_t;
++
++/** Maximum number of Periodic FIFOs */
++#define MAX_PERIO_FIFOS 15
++/** Maximum number of Periodic FIFOs */
++#define MAX_TX_FIFOS 15
++
++/** Maximum number of Endpoints/HostChannels */
++#define MAX_EPS_CHANNELS 16
++
++extern dwc_otg_core_if_t *dwc_otg_cil_init(const uint32_t * _reg_base_addr);
++extern void dwc_otg_core_init(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_cil_remove(dwc_otg_core_if_t * _core_if);
++
++extern void dwc_otg_enable_global_interrupts(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_disable_global_interrupts(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_device_mode(dwc_otg_core_if_t * _core_if);
++extern uint8_t dwc_otg_is_host_mode(dwc_otg_core_if_t * _core_if);
++
++extern uint8_t dwc_otg_is_dma_enable(dwc_otg_core_if_t * core_if);
++
++/** This function should be called on every hardware interrupt. */
++extern int32_t dwc_otg_handle_common_intr(void *otg_dev);
++
++/** @name OTG Core Parameters */
++/** @{ */
++
++/**
++ * Specifies the OTG capabilities. The driver will automatically
++ * detect the value for this parameter if none is specified.
++ * 0 - HNP and SRP capable (default)
++ * 1 - SRP Only capable
++ * 2 - No HNP/SRP capable
++ */
++extern int dwc_otg_set_param_otg_cap(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_cap(dwc_otg_core_if_t * core_if);
++#define DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE 0
++#define DWC_OTG_CAP_PARAM_SRP_ONLY_CAPABLE 1
++#define DWC_OTG_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
++#define dwc_param_otg_cap_default DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE
++
++extern int dwc_otg_set_param_opt(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_opt(dwc_otg_core_if_t * core_if);
++#define dwc_param_opt_default 1
++
++/**
++ * Specifies whether to use slave or DMA mode for accessing the data
++ * FIFOs. The driver will automatically detect the value for this
++ * parameter if none is specified.
++ * 0 - Slave
++ * 1 - DMA (default, if available)
++ */
++extern int dwc_otg_set_param_dma_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_dma_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_enable_default 1
++
++/**
++ * When DMA mode is enabled specifies whether to use
++ * address DMA or DMA Descritor mode for accessing the data
++ * FIFOs in device mode. The driver will automatically detect
++ * the value for this parameter if none is specified.
++ * 0 - address DMA
++ * 1 - DMA Descriptor(default, if available)
++ */
++extern int dwc_otg_set_param_dma_desc_enable(dwc_otg_core_if_t * core_if,
++					     int32_t val);
++extern int32_t dwc_otg_get_param_dma_desc_enable(dwc_otg_core_if_t * core_if);
++//#define dwc_param_dma_desc_enable_default 1
++#define dwc_param_dma_desc_enable_default 0 // Broadcom BCM2708
++
++/** The DMA Burst size (applicable only for External DMA
++ * Mode). 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ */
++extern int dwc_otg_set_param_dma_burst_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_dma_burst_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dma_burst_size_default 32
++
++/**
++ * Specifies the maximum speed of operation in host and device mode.
++ * The actual speed depends on the speed of the attached device and
++ * the value of phy_type. The actual speed depends on the speed of the
++ * attached device.
++ * 0 - High Speed (default)
++ * 1 - Full Speed
++ */
++extern int dwc_otg_set_param_speed(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_speed(dwc_otg_core_if_t * core_if);
++#define dwc_param_speed_default 0
++#define DWC_SPEED_PARAM_HIGH 0
++#define DWC_SPEED_PARAM_FULL 1
++
++/** Specifies whether low power mode is supported when attached
++ *	to a Full Speed or Low Speed device in host mode.
++ * 0 - Don't support low power mode (default)
++ * 1 - Support low power mode
++ */
++extern int dwc_otg_set_param_host_support_fs_ls_low_power(dwc_otg_core_if_t *
++							  core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_support_fs_ls_low_power(dwc_otg_core_if_t
++							      * core_if);
++#define dwc_param_host_support_fs_ls_low_power_default 0
++
++/** Specifies the PHY clock rate in low power mode when connected to a
++ * Low Speed device in host mode. This parameter is applicable only if
++ * HOST_SUPPORT_FS_LS_LOW_POWER is enabled. If PHY_TYPE is set to FS
++ * then defaults to 6 MHZ otherwise 48 MHZ.
++ *
++ * 0 - 48 MHz
++ * 1 - 6 MHz
++ */
++extern int dwc_otg_set_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++						       core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_ls_low_power_phy_clk(dwc_otg_core_if_t *
++							   core_if);
++#define dwc_param_host_ls_low_power_phy_clk_default 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_48MHZ 0
++#define DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ 1
++
++/**
++ * 0 - Use cC FIFO size parameters
++ * 1 - Allow dynamic FIFO sizing (default)
++ */
++extern int dwc_otg_set_param_enable_dynamic_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_enable_dynamic_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_enable_dynamic_fifo_default 1
++
++/** Total number of 4-byte words in the data FIFO memory. This
++ * memory includes the Rx FIFO, non-periodic Tx FIFO, and periodic
++ * Tx FIFOs.
++ * 32 to 32768 (default 8192)
++ * Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ */
++extern int dwc_otg_set_param_data_fifo_size(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_data_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_data_fifo_size_default 8192
++#define dwc_param_data_fifo_size_default 0xFF0 // Broadcom BCM2708
++
++/** Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1064)
++ */
++extern int dwc_otg_set_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_dev_rx_fifo_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_rx_fifo_size_default 1064
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in device mode
++ * when dynamic FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_dev_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++#define dwc_param_dev_nperio_tx_fifo_size_default 1024
++
++/** Number of 4-byte words in each of the periodic Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						    int32_t val, int fifo_num);
++extern int32_t dwc_otg_get_param_dev_perio_tx_fifo_size(dwc_otg_core_if_t *
++							core_if, int fifo_num);
++#define dwc_param_dev_perio_tx_fifo_size_default 256
++
++/** Number of 4-byte words in the Rx FIFO in host mode when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_host_rx_fifo_size(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_rx_fifo_size_default 1024
++#define dwc_param_host_rx_fifo_size_default 774 // Broadcom BCM2708
++
++/** Number of 4-byte words in the non-periodic Tx FIFO in host mode
++ * when Dynamic FIFO sizing is enabled in the core.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++						      core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_nperio_tx_fifo_size(dwc_otg_core_if_t *
++							  core_if);
++//#define dwc_param_host_nperio_tx_fifo_size_default 1024
++#define dwc_param_host_nperio_tx_fifo_size_default 0x100 // Broadcom BCM2708
++
++/** Number of 4-byte words in the host periodic Tx FIFO when dynamic
++ * FIFO sizing is enabled.
++ * 16 to 32768 (default 1024)
++ */
++extern int dwc_otg_set_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++						     core_if, int32_t val);
++extern int32_t dwc_otg_get_param_host_perio_tx_fifo_size(dwc_otg_core_if_t *
++							 core_if);
++//#define dwc_param_host_perio_tx_fifo_size_default 1024
++#define dwc_param_host_perio_tx_fifo_size_default 0x200 // Broadcom BCM2708
++
++/** The maximum transfer size supported in bytes.
++ * 2047 to 65,535  (default 65,535)
++ */
++extern int dwc_otg_set_param_max_transfer_size(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_max_transfer_size(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_transfer_size_default 65535
++
++/** The maximum number of packets in a transfer.
++ * 15 to 511  (default 511)
++ */
++extern int dwc_otg_set_param_max_packet_count(dwc_otg_core_if_t * core_if,
++					      int32_t val);
++extern int32_t dwc_otg_get_param_max_packet_count(dwc_otg_core_if_t * core_if);
++#define dwc_param_max_packet_count_default 511
++
++/** The number of host channel registers to use.
++ * 1 to 16 (default 12)
++ * Note: The FPGA configuration supports a maximum of 12 host channels.
++ */
++extern int dwc_otg_set_param_host_channels(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_host_channels(dwc_otg_core_if_t * core_if);
++//#define dwc_param_host_channels_default 12
++#define dwc_param_host_channels_default 8 // Broadcom BCM2708
++
++/** The number of endpoints in addition to EP0 available for device
++ * mode operations.
++ * 1 to 15 (default 6 IN and OUT)
++ * Note: The FPGA configuration supports a maximum of 6 IN and OUT
++ * endpoints in addition to EP0.
++ */
++extern int dwc_otg_set_param_dev_endpoints(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_dev_endpoints(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_endpoints_default 6
++
++/**
++ * Specifies the type of PHY interface to use. By default, the driver
++ * will automatically detect the phy_type.
++ *
++ * 0 - Full Speed PHY
++ * 1 - UTMI+ (default)
++ * 2 - ULPI
++ */
++extern int dwc_otg_set_param_phy_type(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_phy_type(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_TYPE_PARAM_FS 0
++#define DWC_PHY_TYPE_PARAM_UTMI 1
++#define DWC_PHY_TYPE_PARAM_ULPI 2
++#define dwc_param_phy_type_default DWC_PHY_TYPE_PARAM_UTMI
++
++/**
++ * Specifies the UTMI+ Data Width. This parameter is
++ * applicable for a PHY_TYPE of UTMI+ or ULPI. (For a ULPI
++ * PHY_TYPE, this parameter indicates the data width between
++ * the MAC and the ULPI Wrapper.) Also, this parameter is
++ * applicable only if the OTG_HSPHY_WIDTH cC parameter was set
++ * to "8 and 16 bits", meaning that the core has been
++ * configured to work at either data path width.
++ *
++ * 8 or 16 bits (default 16)
++ */
++extern int dwc_otg_set_param_phy_utmi_width(dwc_otg_core_if_t * core_if,
++					    int32_t val);
++extern int32_t dwc_otg_get_param_phy_utmi_width(dwc_otg_core_if_t * core_if);
++//#define dwc_param_phy_utmi_width_default 16
++#define dwc_param_phy_utmi_width_default 8 // Broadcom BCM2708
++
++/**
++ * Specifies whether the ULPI operates at double or single
++ * data rate. This parameter is only applicable if PHY_TYPE is
++ * ULPI.
++ *
++ * 0 - single data rate ULPI interface with 8 bit wide data
++ * bus (default)
++ * 1 - double data rate ULPI interface with 4 bit wide data
++ * bus
++ */
++extern int dwc_otg_set_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if,
++					  int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ddr(dwc_otg_core_if_t * core_if);
++#define dwc_param_phy_ulpi_ddr_default 0
++
++/**
++ * Specifies whether to use the internal or external supply to
++ * drive the vbus with a ULPI phy.
++ */
++extern int dwc_otg_set_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if,
++					       int32_t val);
++extern int32_t dwc_otg_get_param_phy_ulpi_ext_vbus(dwc_otg_core_if_t * core_if);
++#define DWC_PHY_ULPI_INTERNAL_VBUS 0
++#define DWC_PHY_ULPI_EXTERNAL_VBUS 1
++#define dwc_param_phy_ulpi_ext_vbus_default DWC_PHY_ULPI_INTERNAL_VBUS
++
++/**
++ * Specifies whether to use the I2Cinterface for full speed PHY. This
++ * parameter is only applicable if PHY_TYPE is FS.
++ * 0 - No (default)
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_i2c_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_i2c_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_i2c_enable_default 0
++
++extern int dwc_otg_set_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ulpi_fs_ls(dwc_otg_core_if_t * core_if);
++#define dwc_param_ulpi_fs_ls_default 0
++
++extern int dwc_otg_set_param_ts_dline(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_ts_dline(dwc_otg_core_if_t * core_if);
++#define dwc_param_ts_dline_default 0
++
++/**
++ * Specifies whether dedicated transmit FIFOs are
++ * enabled for non periodic IN endpoints in device mode
++ * 0 - No
++ * 1 - Yes
++ */
++extern int dwc_otg_set_param_en_multiple_tx_fifo(dwc_otg_core_if_t * core_if,
++						 int32_t val);
++extern int32_t dwc_otg_get_param_en_multiple_tx_fifo(dwc_otg_core_if_t *
++						     core_if);
++#define dwc_param_en_multiple_tx_fifo_default 1
++
++/** Number of 4-byte words in each of the Tx FIFOs in device
++ * mode when dynamic FIFO sizing is enabled.
++ * 4 to 768 (default 256)
++ */
++extern int dwc_otg_set_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++					      int fifo_num, int32_t val);
++extern int32_t dwc_otg_get_param_dev_tx_fifo_size(dwc_otg_core_if_t * core_if,
++						  int fifo_num);
++#define dwc_param_dev_tx_fifo_size_default 768
++
++/** Thresholding enable flag-
++ * bit 0 - enable non-ISO Tx thresholding
++ * bit 1 - enable ISO Tx thresholding
++ * bit 2 - enable Rx thresholding
++ */
++extern int dwc_otg_set_param_thr_ctl(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_thr_ctl(dwc_otg_core_if_t * core_if, int fifo_num);
++#define dwc_param_thr_ctl_default 0
++
++/** Thresholding length for Tx
++ * FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_tx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_tx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_tx_thr_length_default 64
++
++/** Thresholding length for Rx
++ *	FIFOs in 32 bit DWORDs
++ */
++extern int dwc_otg_set_param_rx_thr_length(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_rx_thr_length(dwc_otg_core_if_t * core_if);
++#define dwc_param_rx_thr_length_default 64
++
++/**
++ * Specifies whether LPM (Link Power Management) support is enabled
++ */
++extern int dwc_otg_set_param_lpm_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_lpm_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_lpm_enable_default 1
++
++/**
++ * Specifies whether PTI enhancement is enabled
++ */
++extern int dwc_otg_set_param_pti_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_pti_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_pti_enable_default 0
++
++/**
++ * Specifies whether MPI enhancement is enabled
++ */
++extern int dwc_otg_set_param_mpi_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_mpi_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_mpi_enable_default 0
++
++/**
++ * Specifies whether ADP capability is enabled
++ */
++extern int dwc_otg_set_param_adp_enable(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_adp_enable(dwc_otg_core_if_t * core_if);
++#define dwc_param_adp_enable_default 0
++
++/**
++ * Specifies whether IC_USB capability is enabled
++ */
++
++extern int dwc_otg_set_param_ic_usb_cap(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_ic_usb_cap(dwc_otg_core_if_t * core_if);
++#define dwc_param_ic_usb_cap_default 0
++
++extern int dwc_otg_set_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if,
++					   int32_t val);
++extern int32_t dwc_otg_get_param_ahb_thr_ratio(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_thr_ratio_default 0
++
++extern int dwc_otg_set_param_power_down(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_power_down(dwc_otg_core_if_t * core_if);
++#define dwc_param_power_down_default 0
++
++extern int dwc_otg_set_param_reload_ctl(dwc_otg_core_if_t * core_if,
++					int32_t val);
++extern int32_t dwc_otg_get_param_reload_ctl(dwc_otg_core_if_t * core_if);
++#define dwc_param_reload_ctl_default 0
++
++extern int dwc_otg_set_param_dev_out_nak(dwc_otg_core_if_t * core_if,
++										int32_t val);
++extern int32_t dwc_otg_get_param_dev_out_nak(dwc_otg_core_if_t * core_if);
++#define dwc_param_dev_out_nak_default 0
++
++extern int dwc_otg_set_param_cont_on_bna(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_cont_on_bna(dwc_otg_core_if_t * core_if);
++#define dwc_param_cont_on_bna_default 0
++
++extern int dwc_otg_set_param_ahb_single(dwc_otg_core_if_t * core_if,
++										 int32_t val);
++extern int32_t dwc_otg_get_param_ahb_single(dwc_otg_core_if_t * core_if);
++#define dwc_param_ahb_single_default 0
++
++extern int dwc_otg_set_param_otg_ver(dwc_otg_core_if_t * core_if, int32_t val);
++extern int32_t dwc_otg_get_param_otg_ver(dwc_otg_core_if_t * core_if);
++#define dwc_param_otg_ver_default 0
++
++/** @} */
++
++/** @name Access to registers and bit-fields */
++
++/**
++ * Dump core registers and SPRAM
++ */
++extern void dwc_otg_dump_dev_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_spram(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_host_registers(dwc_otg_core_if_t * _core_if);
++extern void dwc_otg_dump_global_registers(dwc_otg_core_if_t * _core_if);
++
++/**
++ * Get host negotiation status.
++ */
++extern uint32_t dwc_otg_get_hnpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get srp status
++ */
++extern uint32_t dwc_otg_get_srpstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set hnpreq bit in the GOTGCTL register.
++ */
++extern void dwc_otg_set_hnpreq(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get Content of SNPSID register.
++ */
++extern uint32_t dwc_otg_get_gsnpsid(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get current mode.
++ * Returns 0 if in device mode, and 1 if in host mode.
++ */
++extern uint32_t dwc_otg_get_mode(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of hnpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_hnpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hnpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_hnpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of srpcapable field in the GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_srpcapable(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of srpcapable field in the GUSBCFG register
++ */
++extern void dwc_otg_set_srpcapable(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of devspeed field in the DCFG register
++ */
++extern uint32_t dwc_otg_get_devspeed(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of devspeed field in the DCFG register
++ */
++extern void dwc_otg_set_devspeed(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get the value of busconnected field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_busconnected(dwc_otg_core_if_t * core_if);
++
++/**
++ * Gets the device enumeration Speed.
++ */
++extern uint32_t dwc_otg_get_enumspeed(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prtpwr field from the HPRT0 register
++ */
++extern uint32_t dwc_otg_get_prtpower(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of flag indicating core state - hibernated or not
++ */
++extern uint32_t dwc_otg_get_core_state(dwc_otg_core_if_t * core_if);
++
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtpower(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of prtsusp field from the HPRT0 regsiter
++ */
++extern uint32_t dwc_otg_get_prtsuspend(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of prtpwr field from the HPRT0 register
++ */
++extern void dwc_otg_set_prtsuspend(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of ModeChTimEn field from the HCFG regsiter
++ */
++extern uint32_t dwc_otg_get_mode_ch_tim(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of ModeChTimEn field from the HCFG regsiter
++ */
++extern void dwc_otg_set_mode_ch_tim(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of Fram Interval field from the HFIR regsiter
++ */
++extern uint32_t dwc_otg_get_fr_interval(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of Frame Interval field from the HFIR regsiter
++ */
++extern void dwc_otg_set_fr_interval(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Set value of prtres field from the HPRT0 register
++ *FIXME Remove?
++ */
++extern void dwc_otg_set_prtresume(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of rmtwkupsig bit in DCTL register
++ */
++extern uint32_t dwc_otg_get_remotewakesig(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of prt_sleep_sts field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_portsleepstatus(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of rem_wkup_en field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpm_remotewakeenabled(dwc_otg_core_if_t * core_if);
++
++/**
++ * Get value of appl_resp field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_lpmresponse(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of appl_resp field from the GLPMCFG register
++ */
++extern void dwc_otg_set_lpmresponse(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of hsic_connect field from the GLPMCFG register
++ */
++extern uint32_t dwc_otg_get_hsic_connect(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of hsic_connect field from the GLPMCFG register
++ */
++extern void dwc_otg_set_hsic_connect(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * Get value of inv_sel_hsic field from the GLPMCFG register.
++ */
++extern uint32_t dwc_otg_get_inv_sel_hsic(dwc_otg_core_if_t * core_if);
++/**
++ * Set value of inv_sel_hsic field from the GLPMFG register.
++ */
++extern void dwc_otg_set_inv_sel_hsic(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/*
++ * Some functions for accessing registers
++ */
++
++/**
++ *  GOTGCTL register
++ */
++extern uint32_t dwc_otg_get_gotgctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gotgctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUSBCFG register
++ */
++extern uint32_t dwc_otg_get_gusbcfg(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gusbcfg(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GRXFSIZ register
++ */
++extern uint32_t dwc_otg_get_grxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_grxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GNPTXFSIZ register
++ */
++extern uint32_t dwc_otg_get_gnptxfsiz(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gnptxfsiz(dwc_otg_core_if_t * core_if, uint32_t val);
++
++extern uint32_t dwc_otg_get_gpvndctl(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_gpvndctl(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GGPIO register
++ */
++extern uint32_t dwc_otg_get_ggpio(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_ggpio(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GUID register
++ */
++extern uint32_t dwc_otg_get_guid(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_guid(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * HPRT0 register
++ */
++extern uint32_t dwc_otg_get_hprt0(dwc_otg_core_if_t * core_if);
++extern void dwc_otg_set_hprt0(dwc_otg_core_if_t * core_if, uint32_t val);
++
++/**
++ * GHPTXFSIZE
++ */
++extern uint32_t dwc_otg_get_hptxfsiz(dwc_otg_core_if_t * core_if);
++
++/** @} */
++
++#endif				/* __DWC_CORE_IF_H__ */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_dbg.h b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
+new file mode 100644
+index 0000000..8900318
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_dbg.h
+@@ -0,0 +1,116 @@
++/* ==========================================================================
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DBG_H__
++#define __DWC_OTG_DBG_H__
++
++/** @file
++ * This file defines debug levels.
++ * Debugging support vanishes in non-debug builds.
++ */
++
++/**
++ * The Debug Level bit-mask variable.
++ */
++extern uint32_t g_dbg_lvl;
++/**
++ * Set the Debug Level variable.
++ */
++static inline uint32_t SET_DEBUG_LEVEL(const uint32_t new)
++{
++	uint32_t old = g_dbg_lvl;
++	g_dbg_lvl = new;
++	return old;
++}
++
++/** When debug level has the DBG_CIL bit set, display CIL Debug messages. */
++#define DBG_CIL		(0x2)
++/** When debug level has the DBG_CILV bit set, display CIL Verbose debug
++ * messages */
++#define DBG_CILV	(0x20)
++/**  When debug level has the DBG_PCD bit set, display PCD (Device) debug
++ *  messages */
++#define DBG_PCD		(0x4)
++/** When debug level has the DBG_PCDV set, display PCD (Device) Verbose debug
++ * messages */
++#define DBG_PCDV	(0x40)
++/** When debug level has the DBG_HCD bit set, display Host debug messages */
++#define DBG_HCD		(0x8)
++/** When debug level has the DBG_HCDV bit set, display Verbose Host debug
++ * messages */
++#define DBG_HCDV	(0x80)
++/** When debug level has the DBG_HCD_URB bit set, display enqueued URBs in host
++ *  mode. */
++#define DBG_HCD_URB	(0x800)
++/** When debug level has the DBG_HCDI bit set, display host interrupt
++ *  messages. */
++#define DBG_HCDI	(0x1000)
++
++/** When debug level has any bit set, display debug messages */
++#define DBG_ANY		(0xFF)
++
++/** All debug messages off */
++#define DBG_OFF		0
++
++/** Prefix string for DWC_DEBUG print macros. */
++#define USB_DWC "DWC_otg: "
++
++/**
++ * Print a debug message when the Global debug level variable contains
++ * the bit defined in <code>lvl</code>.
++ *
++ * @param[in] lvl - Debug level, use one of the DBG_ constants above.
++ * @param[in] x - like printf
++ *
++ *    Example:<p>
++ * <code>
++ *      DWC_DEBUGPL( DBG_ANY, "%s(%p)\n", __func__, _reg_base_addr);
++ * </code>
++ * <br>
++ * results in:<br>
++ * <code>
++ * usb-DWC_otg: dwc_otg_cil_init(ca867000)
++ * </code>
++ */
++#ifdef DEBUG
++
++# define DWC_DEBUGPL(lvl, x...) do{ if ((lvl)&g_dbg_lvl)__DWC_DEBUG(USB_DWC x ); }while(0)
++# define DWC_DEBUGP(x...)	DWC_DEBUGPL(DBG_ANY, x )
++
++# define CHK_DEBUG_LEVEL(level) ((level) & g_dbg_lvl)
++
++#else
++
++# define DWC_DEBUGPL(lvl, x...) do{}while(0)
++# define DWC_DEBUGP(x...)
++
++# define CHK_DEBUG_LEVEL(level) (0)
++
++#endif /*DEBUG*/
++#endif
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_driver.c b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+new file mode 100644
+index 0000000..ac2c846
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.c
+@@ -0,0 +1,1700 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.c $
++ * $Revision: #92 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++/** @file
++ * The dwc_otg_driver module provides the initialization and cleanup entry
++ * points for the DWC_otg driver. This module will be dynamically installed
++ * after Linux is booted using the insmod command. When the module is
++ * installed, the dwc_otg_driver_init function is called. When the module is
++ * removed (using rmmod), the dwc_otg_driver_cleanup function is called.
++ *
++ * This module also defines a data structure for the dwc_otg_driver, which is
++ * used in conjunction with the standard ARM lm_device structure. These
++ * structures allow the OTG driver to comply with the standard Linux driver
++ * model in which devices and drivers are registered with a bus driver. This
++ * has the benefit that Linux can expose attributes of the driver and device
++ * in its special sysfs file system. Users can then read or write files in
++ * this file system to perform diagnostics on the driver components or the
++ * device.
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_os.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_attr.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_hcd_if.h"
++
++#define DWC_DRIVER_VERSION	"3.00a 10-AUG-2012"
++#define DWC_DRIVER_DESC		"HS OTG USB Controller driver"
++
++bool microframe_schedule=true;
++
++static const char dwc_driver_name[] = "dwc_otg";
++
++extern int pcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++extern int hcd_init(
++#ifdef LM_INTERFACE
++			   struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			   struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *dev
++#endif
++    );
++
++extern int pcd_remove(
++#ifdef LM_INTERFACE
++			     struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			     struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void hcd_remove(
++#ifdef LM_INTERFACE
++			      struct lm_device *_dev
++#elif  defined(PCI_INTERFACE)
++			      struct pci_dev *_dev
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *_dev
++#endif
++    );
++
++extern void dwc_otg_adp_start(dwc_otg_core_if_t * core_if, uint8_t is_host);
++
++/*-------------------------------------------------------------------------*/
++/* Encapsulate the module parameter settings */
++
++struct dwc_otg_driver_module_params {
++	int32_t opt;
++	int32_t otg_cap;
++	int32_t dma_enable;
++	int32_t dma_desc_enable;
++	int32_t dma_burst_size;
++	int32_t speed;
++	int32_t host_support_fs_ls_low_power;
++	int32_t host_ls_low_power_phy_clk;
++	int32_t enable_dynamic_fifo;
++	int32_t data_fifo_size;
++	int32_t dev_rx_fifo_size;
++	int32_t dev_nperio_tx_fifo_size;
++	uint32_t dev_perio_tx_fifo_size[MAX_PERIO_FIFOS];
++	int32_t host_rx_fifo_size;
++	int32_t host_nperio_tx_fifo_size;
++	int32_t host_perio_tx_fifo_size;
++	int32_t max_transfer_size;
++	int32_t max_packet_count;
++	int32_t host_channels;
++	int32_t dev_endpoints;
++	int32_t phy_type;
++	int32_t phy_utmi_width;
++	int32_t phy_ulpi_ddr;
++	int32_t phy_ulpi_ext_vbus;
++	int32_t i2c_enable;
++	int32_t ulpi_fs_ls;
++	int32_t ts_dline;
++	int32_t en_multiple_tx_fifo;
++	uint32_t dev_tx_fifo_size[MAX_TX_FIFOS];
++	uint32_t thr_ctl;
++	uint32_t tx_thr_length;
++	uint32_t rx_thr_length;
++	int32_t pti_enable;
++	int32_t mpi_enable;
++	int32_t lpm_enable;
++	int32_t ic_usb_cap;
++	int32_t ahb_thr_ratio;
++	int32_t power_down;
++	int32_t reload_ctl;
++	int32_t dev_out_nak;
++	int32_t cont_on_bna;
++	int32_t ahb_single;
++	int32_t otg_ver;
++	int32_t adp_enable;
++};
++
++static struct dwc_otg_driver_module_params dwc_otg_module_params = {
++	.opt = -1,
++	.otg_cap = -1,
++	.dma_enable = -1,
++	.dma_desc_enable = -1,
++	.dma_burst_size = -1,
++	.speed = -1,
++	.host_support_fs_ls_low_power = -1,
++	.host_ls_low_power_phy_clk = -1,
++	.enable_dynamic_fifo = -1,
++	.data_fifo_size = -1,
++	.dev_rx_fifo_size = -1,
++	.dev_nperio_tx_fifo_size = -1,
++	.dev_perio_tx_fifo_size = {
++				   /* dev_perio_tx_fifo_size_1 */
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1,
++				   -1
++				   /* 15 */
++				   },
++	.host_rx_fifo_size = -1,
++	.host_nperio_tx_fifo_size = -1,
++	.host_perio_tx_fifo_size = -1,
++	.max_transfer_size = -1,
++	.max_packet_count = -1,
++	.host_channels = -1,
++	.dev_endpoints = -1,
++	.phy_type = -1,
++	.phy_utmi_width = -1,
++	.phy_ulpi_ddr = -1,
++	.phy_ulpi_ext_vbus = -1,
++	.i2c_enable = -1,
++	.ulpi_fs_ls = -1,
++	.ts_dline = -1,
++	.en_multiple_tx_fifo = -1,
++	.dev_tx_fifo_size = {
++			     /* dev_tx_fifo_size */
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1,
++			     -1
++			     /* 15 */
++			     },
++	.thr_ctl = -1,
++	.tx_thr_length = -1,
++	.rx_thr_length = -1,
++	.pti_enable = -1,
++	.mpi_enable = -1,
++	.lpm_enable = 0,
++	.ic_usb_cap = -1,
++	.ahb_thr_ratio = -1,
++	.power_down = -1,
++	.reload_ctl = -1,
++	.dev_out_nak = -1,
++	.cont_on_bna = -1,
++	.ahb_single = -1,
++	.otg_ver = -1,
++	.adp_enable = -1,
++};
++
++/**
++ * This function shows the Driver Version.
++ */
++static ssize_t version_show(struct device_driver *dev, char *buf)
++{
++	return snprintf(buf, sizeof(DWC_DRIVER_VERSION) + 2, "%s\n",
++			DWC_DRIVER_VERSION);
++}
++
++static DRIVER_ATTR(version, S_IRUGO, version_show, NULL);
++
++/**
++ * Global Debug Level Mask.
++ */
++uint32_t g_dbg_lvl = 0;		/* OFF */
++
++/**
++ * This function shows the driver Debug Level.
++ */
++static ssize_t dbg_level_show(struct device_driver *drv, char *buf)
++{
++	return sprintf(buf, "0x%0x\n", g_dbg_lvl);
++}
++
++/**
++ * This function stores the driver Debug Level.
++ */
++static ssize_t dbg_level_store(struct device_driver *drv, const char *buf,
++			       size_t count)
++{
++	g_dbg_lvl = simple_strtoul(buf, NULL, 16);
++	return count;
++}
++
++static DRIVER_ATTR(debuglevel, S_IRUGO | S_IWUSR, dbg_level_show,
++		   dbg_level_store);
++
++/**
++ * This function is called during module intialization
++ * to pass module parameters to the DWC_OTG CORE.
++ */
++static int set_parameters(dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int i;
++
++	if (dwc_otg_module_params.otg_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_cap(core_if,
++					      dwc_otg_module_params.otg_cap);
++	}
++	if (dwc_otg_module_params.dma_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_enable(core_if,
++						 dwc_otg_module_params.
++						 dma_enable);
++	}
++	if (dwc_otg_module_params.dma_desc_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_desc_enable(core_if,
++						      dwc_otg_module_params.
++						      dma_desc_enable);
++	}
++	if (dwc_otg_module_params.opt != -1) {
++		retval +=
++		    dwc_otg_set_param_opt(core_if, dwc_otg_module_params.opt);
++	}
++	if (dwc_otg_module_params.dma_burst_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dma_burst_size(core_if,
++						     dwc_otg_module_params.
++						     dma_burst_size);
++	}
++	if (dwc_otg_module_params.host_support_fs_ls_low_power != -1) {
++		retval +=
++		    dwc_otg_set_param_host_support_fs_ls_low_power(core_if,
++								   dwc_otg_module_params.
++								   host_support_fs_ls_low_power);
++	}
++	if (dwc_otg_module_params.enable_dynamic_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_enable_dynamic_fifo(core_if,
++							  dwc_otg_module_params.
++							  enable_dynamic_fifo);
++	}
++	if (dwc_otg_module_params.data_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_data_fifo_size(core_if,
++						     dwc_otg_module_params.
++						     data_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_rx_fifo_size(core_if,
++						       dwc_otg_module_params.
++						       dev_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.dev_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_nperio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      dev_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_rx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_rx_fifo_size(core_if,
++							dwc_otg_module_params.host_rx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_nperio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_nperio_tx_fifo_size(core_if,
++							       dwc_otg_module_params.
++							       host_nperio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.host_perio_tx_fifo_size != -1) {
++		retval +=
++		    dwc_otg_set_param_host_perio_tx_fifo_size(core_if,
++							      dwc_otg_module_params.
++							      host_perio_tx_fifo_size);
++	}
++	if (dwc_otg_module_params.max_transfer_size != -1) {
++		retval +=
++		    dwc_otg_set_param_max_transfer_size(core_if,
++							dwc_otg_module_params.
++							max_transfer_size);
++	}
++	if (dwc_otg_module_params.max_packet_count != -1) {
++		retval +=
++		    dwc_otg_set_param_max_packet_count(core_if,
++						       dwc_otg_module_params.
++						       max_packet_count);
++	}
++	if (dwc_otg_module_params.host_channels != -1) {
++		retval +=
++		    dwc_otg_set_param_host_channels(core_if,
++						    dwc_otg_module_params.
++						    host_channels);
++	}
++	if (dwc_otg_module_params.dev_endpoints != -1) {
++		retval +=
++		    dwc_otg_set_param_dev_endpoints(core_if,
++						    dwc_otg_module_params.
++						    dev_endpoints);
++	}
++	if (dwc_otg_module_params.phy_type != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_type(core_if,
++					       dwc_otg_module_params.phy_type);
++	}
++	if (dwc_otg_module_params.speed != -1) {
++		retval +=
++		    dwc_otg_set_param_speed(core_if,
++					    dwc_otg_module_params.speed);
++	}
++	if (dwc_otg_module_params.host_ls_low_power_phy_clk != -1) {
++		retval +=
++		    dwc_otg_set_param_host_ls_low_power_phy_clk(core_if,
++								dwc_otg_module_params.
++								host_ls_low_power_phy_clk);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ddr != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ddr(core_if,
++						   dwc_otg_module_params.
++						   phy_ulpi_ddr);
++	}
++	if (dwc_otg_module_params.phy_ulpi_ext_vbus != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_ulpi_ext_vbus(core_if,
++							dwc_otg_module_params.
++							phy_ulpi_ext_vbus);
++	}
++	if (dwc_otg_module_params.phy_utmi_width != -1) {
++		retval +=
++		    dwc_otg_set_param_phy_utmi_width(core_if,
++						     dwc_otg_module_params.
++						     phy_utmi_width);
++	}
++	if (dwc_otg_module_params.ulpi_fs_ls != -1) {
++		retval +=
++		    dwc_otg_set_param_ulpi_fs_ls(core_if,
++						 dwc_otg_module_params.ulpi_fs_ls);
++	}
++	if (dwc_otg_module_params.ts_dline != -1) {
++		retval +=
++		    dwc_otg_set_param_ts_dline(core_if,
++					       dwc_otg_module_params.ts_dline);
++	}
++	if (dwc_otg_module_params.i2c_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_i2c_enable(core_if,
++						 dwc_otg_module_params.
++						 i2c_enable);
++	}
++	if (dwc_otg_module_params.en_multiple_tx_fifo != -1) {
++		retval +=
++		    dwc_otg_set_param_en_multiple_tx_fifo(core_if,
++							  dwc_otg_module_params.
++							  en_multiple_tx_fifo);
++	}
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_perio_tx_fifo_size[i] != -1) {
++			retval +=
++			    dwc_otg_set_param_dev_perio_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_perio_tx_fifo_size
++								     [i], i);
++		}
++	}
++
++	for (i = 0; i < 15; i++) {
++		if (dwc_otg_module_params.dev_tx_fifo_size[i] != -1) {
++			retval += dwc_otg_set_param_dev_tx_fifo_size(core_if,
++								     dwc_otg_module_params.
++								     dev_tx_fifo_size
++								     [i], i);
++		}
++	}
++	if (dwc_otg_module_params.thr_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_thr_ctl(core_if,
++					      dwc_otg_module_params.thr_ctl);
++	}
++	if (dwc_otg_module_params.mpi_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_mpi_enable(core_if,
++						 dwc_otg_module_params.
++						 mpi_enable);
++	}
++	if (dwc_otg_module_params.pti_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_pti_enable(core_if,
++						 dwc_otg_module_params.
++						 pti_enable);
++	}
++	if (dwc_otg_module_params.lpm_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_lpm_enable(core_if,
++						 dwc_otg_module_params.
++						 lpm_enable);
++	}
++	if (dwc_otg_module_params.ic_usb_cap != -1) {
++		retval +=
++		    dwc_otg_set_param_ic_usb_cap(core_if,
++						 dwc_otg_module_params.
++						 ic_usb_cap);
++	}
++	if (dwc_otg_module_params.tx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_tx_thr_length(core_if,
++						    dwc_otg_module_params.tx_thr_length);
++	}
++	if (dwc_otg_module_params.rx_thr_length != -1) {
++		retval +=
++		    dwc_otg_set_param_rx_thr_length(core_if,
++						    dwc_otg_module_params.
++						    rx_thr_length);
++	}
++	if (dwc_otg_module_params.ahb_thr_ratio != -1) {
++		retval +=
++		    dwc_otg_set_param_ahb_thr_ratio(core_if,
++						    dwc_otg_module_params.ahb_thr_ratio);
++	}
++	if (dwc_otg_module_params.power_down != -1) {
++		retval +=
++		    dwc_otg_set_param_power_down(core_if,
++						 dwc_otg_module_params.power_down);
++	}
++	if (dwc_otg_module_params.reload_ctl != -1) {
++		retval +=
++		    dwc_otg_set_param_reload_ctl(core_if,
++						 dwc_otg_module_params.reload_ctl);
++	}
++
++	if (dwc_otg_module_params.dev_out_nak != -1) {
++		retval +=
++			dwc_otg_set_param_dev_out_nak(core_if,
++			dwc_otg_module_params.dev_out_nak);
++	}
++
++	if (dwc_otg_module_params.cont_on_bna != -1) {
++		retval +=
++			dwc_otg_set_param_cont_on_bna(core_if,
++			dwc_otg_module_params.cont_on_bna);
++	}
++
++	if (dwc_otg_module_params.ahb_single != -1) {
++		retval +=
++			dwc_otg_set_param_ahb_single(core_if,
++			dwc_otg_module_params.ahb_single);
++	}
++
++	if (dwc_otg_module_params.otg_ver != -1) {
++		retval +=
++		    dwc_otg_set_param_otg_ver(core_if,
++					      dwc_otg_module_params.otg_ver);
++	}
++	if (dwc_otg_module_params.adp_enable != -1) {
++		retval +=
++		    dwc_otg_set_param_adp_enable(core_if,
++						 dwc_otg_module_params.
++						 adp_enable);
++	}
++	return retval;
++}
++
++/**
++ * This function is the top level interrupt handler for the Common
++ * (Device and host modes) interrupts.
++ */
++static irqreturn_t dwc_otg_common_irq(int irq, void *dev)
++{
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_handle_common_intr(dev);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function is called when a lm_device is unregistered with the
++ * dwc_otg_driver. This happens, for example, when the rmmod command is
++ * executed. The device may or may not be electrically present. If it is
++ * present, the driver stops device processing. Any resources used on behalf
++ * of this device are freed.
++ *
++ * @param _dev
++ */
++#ifdef LM_INTERFACE
++#define REM_RETVAL(n)
++static void dwc_otg_driver_remove(	 struct lm_device *_dev )
++{       dwc_otg_device_t *otg_dev = lm_get_drvdata(_dev);
++#elif  defined(PCI_INTERFACE)
++#define REM_RETVAL(n)
++static void dwc_otg_driver_remove(	 struct pci_dev *_dev )
++{	dwc_otg_device_t *otg_dev = pci_get_drvdata(_dev);
++#elif  defined(PLATFORM_INTERFACE)
++#define REM_RETVAL(n) n
++static int dwc_otg_driver_remove(        struct platform_device *_dev )
++{       dwc_otg_device_t *otg_dev = platform_get_drvdata(_dev);
++#endif
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	if (!otg_dev) {
++		/* Memory allocation for the dwc_otg_device failed. */
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++                return REM_RETVAL(-ENOMEM);
++	}
++#ifndef DWC_DEVICE_ONLY
++	if (otg_dev->hcd) {
++		hcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++
++#ifndef DWC_HOST_ONLY
++	if (otg_dev->pcd) {
++		pcd_remove(_dev);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->pcd NULL!\n", __func__);
++                return REM_RETVAL(-EINVAL);
++	}
++#endif
++	/*
++	 * Free the IRQ
++	 */
++	if (otg_dev->common_irq_installed) {
++#ifdef PLATFORM_INTERFACE
++		free_irq(platform_get_irq(_dev, 0), otg_dev);
++#else
++		free_irq(_dev->irq, otg_dev);
++#endif
++        } else {
++		DWC_DEBUGPL(DBG_ANY, "%s: There is no installed irq!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}
++
++	if (otg_dev->core_if) {
++		dwc_otg_cil_remove(otg_dev->core_if);
++	} else {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->core_if NULL!\n", __func__);
++		return REM_RETVAL(-ENXIO);
++	}
++
++	/*
++	 * Remove the device attributes
++	 */
++	dwc_otg_attr_remove(_dev);
++
++	/*
++	 * Return the memory.
++	 */
++	if (otg_dev->os_dep.base) {
++		iounmap(otg_dev->os_dep.base);
++	}
++	DWC_FREE(otg_dev);
++
++	/*
++	 * Clear the drvdata pointer.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, 0);
++#elif defined(PCI_INTERFACE)
++        release_mem_region(otg_dev->os_dep.rsrc_start,
++                           otg_dev->os_dep.rsrc_len);
++	pci_set_drvdata(_dev, 0);
++#elif  defined(PLATFORM_INTERFACE)
++        platform_set_drvdata(_dev, 0);
++#endif
++        return REM_RETVAL(0);
++}
++
++/**
++ * This function is called when an lm_device is bound to a
++ * dwc_otg_driver. It creates the driver components required to
++ * control the device (CIL, HCD, and PCD) and it initializes the
++ * device. The driver components are stored in a dwc_otg_device
++ * structure. A reference to the dwc_otg_device is saved in the
++ * lm_device. This allows the driver to access the dwc_otg_device
++ * structure on subsequent calls to driver methods for this device.
++ *
++ * @param _dev Bus device
++ */
++static int dwc_otg_driver_probe(
++#ifdef LM_INTERFACE
++				       struct lm_device *_dev
++#elif defined(PCI_INTERFACE)
++				       struct pci_dev *_dev,
++				       const struct pci_device_id *id
++#elif  defined(PLATFORM_INTERFACE)
++                                       struct platform_device *_dev
++#endif
++    )
++{
++	int retval = 0;
++	dwc_otg_device_t *dwc_otg_device;
++        int devirq;
++
++	dev_dbg(&_dev->dev, "dwc_otg_driver_probe(%p)\n", _dev);
++#ifdef LM_INTERFACE
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)_dev->resource.start);
++#elif defined(PCI_INTERFACE)
++	if (!id) {
++		DWC_ERROR("Invalid pci_device_id %p", id);
++		return -EINVAL;
++	}
++
++	if (!_dev || (pci_enable_device(_dev) < 0)) {
++		DWC_ERROR("Invalid pci_device %p", _dev);
++		return -ENODEV;
++	}
++	dev_dbg(&_dev->dev, "start=0x%08x\n", (unsigned)pci_resource_start(_dev,0));
++	/* other stuff needed as well? */
++
++#elif  defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "start=0x%08x (len 0x%x)\n",
++                (unsigned)_dev->resource->start,
++                (unsigned)(_dev->resource->end - _dev->resource->start));
++#endif
++
++	dwc_otg_device = DWC_ALLOC(sizeof(dwc_otg_device_t));
++
++	if (!dwc_otg_device) {
++		dev_err(&_dev->dev, "kmalloc of dwc_otg_device failed\n");
++		return -ENOMEM;
++	}
++
++	memset(dwc_otg_device, 0, sizeof(*dwc_otg_device));
++	dwc_otg_device->os_dep.reg_offset = 0xFFFFFFFF;
++
++	/*
++	 * Map the DWC_otg Core memory into virtual address space.
++	 */
++#ifdef LM_INTERFACE
++	dwc_otg_device->os_dep.base = ioremap(_dev->resource.start, SZ_256K);
++
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		DWC_FREE(dwc_otg_device);
++		return -ENOMEM;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++		(unsigned)dwc_otg_device->os_dep.base);
++#elif defined(PCI_INTERFACE)
++	_dev->current_state = PCI_D0;
++	_dev->dev.power.power_state = PMSG_ON;
++
++	if (!_dev->irq) {
++		DWC_ERROR("Found HC with no IRQ. Check BIOS/PCI %s setup!",
++			  pci_name(_dev));
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -ENODEV;
++	}
++
++	dwc_otg_device->os_dep.rsrc_start = pci_resource_start(_dev, 0);
++	dwc_otg_device->os_dep.rsrc_len = pci_resource_len(_dev, 0);
++	DWC_DEBUGPL(DBG_ANY, "PCI resource: start=%08x, len=%08x\n",
++		    (unsigned)dwc_otg_device->os_dep.rsrc_start,
++		    (unsigned)dwc_otg_device->os_dep.rsrc_len);
++	if (!request_mem_region
++	    (dwc_otg_device->os_dep.rsrc_start, dwc_otg_device->os_dep.rsrc_len,
++	     "dwc_otg")) {
++		dev_dbg(&_dev->dev, "error requesting memory\n");
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++
++	dwc_otg_device->os_dep.base =
++	    ioremap_nocache(dwc_otg_device->os_dep.rsrc_start,
++			    dwc_otg_device->os_dep.rsrc_len);
++	if (dwc_otg_device->os_dep.base == NULL) {
++		dev_dbg(&_dev->dev, "error mapping memory\n");
++		release_mem_region(dwc_otg_device->os_dep.rsrc_start,
++				   dwc_otg_device->os_dep.rsrc_len);
++		iounmap(dwc_otg_device->os_dep.base);
++		DWC_FREE(dwc_otg_device);
++		return -EFAULT;
++	}
++	dev_dbg(&_dev->dev, "base=0x%p (before adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dwc_otg_device->os_dep.base = (char *)dwc_otg_device->os_dep.base;
++	dev_dbg(&_dev->dev, "base=0x%p (after adjust) \n",
++		dwc_otg_device->os_dep.base);
++	dev_dbg(&_dev->dev, "%s: mapped PA 0x%x to VA 0x%p\n", __func__,
++		(unsigned)dwc_otg_device->os_dep.rsrc_start,
++		dwc_otg_device->os_dep.base);
++
++	pci_set_master(_dev);
++	pci_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++        DWC_DEBUGPL(DBG_ANY,"Platform resource: start=%08x, len=%08x\n",
++                    _dev->resource->start,
++                    _dev->resource->end - _dev->resource->start + 1);
++#if 1
++        if (!request_mem_region(_dev->resource->start,
++                                _dev->resource->end - _dev->resource->start + 1,
++                                "dwc_otg")) {
++          dev_dbg(&_dev->dev, "error reserving mapped memory\n");
++          retval = -EFAULT;
++          goto fail;
++        }
++
++	dwc_otg_device->os_dep.base = ioremap_nocache(_dev->resource->start,
++                                                      _dev->resource->end -
++                                                      _dev->resource->start+1);
++#else
++        {
++                struct map_desc desc = {
++                    .virtual = IO_ADDRESS((unsigned)_dev->resource->start),
++                    .pfn     = __phys_to_pfn((unsigned)_dev->resource->start),
++                    .length  = SZ_128K,
++                    .type    = MT_DEVICE
++                };
++                iotable_init(&desc, 1);
++                dwc_otg_device->os_dep.base = (void *)desc.virtual;
++        }
++#endif
++	if (!dwc_otg_device->os_dep.base) {
++		dev_err(&_dev->dev, "ioremap() failed\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++	dev_dbg(&_dev->dev, "base=0x%08x\n",
++                (unsigned)dwc_otg_device->os_dep.base);
++#endif
++
++	/*
++	 * Initialize driver data to point to the global DWC_otg
++	 * Device structure.
++	 */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#endif
++	dev_dbg(&_dev->dev, "dwc_otg_device=0x%p\n", dwc_otg_device);
++
++	dwc_otg_device->core_if = dwc_otg_cil_init(dwc_otg_device->os_dep.base);
++        DWC_DEBUGPL(DBG_HCDV, "probe of device %p given core_if %p\n",
++                    dwc_otg_device, dwc_otg_device->core_if);//GRAYG
++
++	if (!dwc_otg_device->core_if) {
++		dev_err(&_dev->dev, "CIL initialization failed!\n");
++		retval = -ENOMEM;
++		goto fail;
++	}
++
++	dev_dbg(&_dev->dev, "Calling get_gsnpsid\n");
++	/*
++	 * Attempt to ensure this device is really a DWC_otg Controller.
++	 * Read and verify the SNPSID register contents. The value should be
++	 * 0x45F42XXX or 0x45F42XXX, which corresponds to either "OT2" or "OTG3",
++	 * as in "OTG version 2.XX" or "OTG version 3.XX".
++	 */
++
++	if (((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) !=	0x4F542000) &&
++		((dwc_otg_get_gsnpsid(dwc_otg_device->core_if) & 0xFFFFF000) != 0x4F543000)) {
++		dev_err(&_dev->dev, "Bad value for SNPSID: 0x%08x\n",
++			dwc_otg_get_gsnpsid(dwc_otg_device->core_if));
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Validate parameter values.
++	 */
++	dev_dbg(&_dev->dev, "Calling set_parameters\n");
++	if (set_parameters(dwc_otg_device->core_if)) {
++		retval = -EINVAL;
++		goto fail;
++	}
++
++	/*
++	 * Create Device Attributes in sysfs
++	 */
++	dev_dbg(&_dev->dev, "Calling attr_create\n");
++	dwc_otg_attr_create(_dev);
++
++	/*
++	 * Disable the global interrupt until all the interrupt
++	 * handlers are installed.
++	 */
++	dev_dbg(&_dev->dev, "Calling disable_global_interrupts\n");
++	dwc_otg_disable_global_interrupts(dwc_otg_device->core_if);
++
++	/*
++	 * Install the interrupt handler for the common interrupts before
++	 * enabling common interrupts in core_init below.
++	 */
++
++#if defined(PLATFORM_INTERFACE)
++        devirq = platform_get_irq(_dev, 0);
++#else
++        devirq = _dev->irq;
++#endif
++	DWC_DEBUGPL(DBG_CIL, "registering (common) handler for irq%d\n",
++		    devirq);
++	dev_dbg(&_dev->dev, "Calling request_irq(%d)\n", devirq);
++	retval = request_irq(devirq, dwc_otg_common_irq,
++                             IRQF_SHARED,
++                             "dwc_otg", dwc_otg_device);
++	if (retval) {
++		DWC_ERROR("request of irq%d failed\n", devirq);
++		retval = -EBUSY;
++		goto fail;
++	} else {
++		dwc_otg_device->common_irq_installed = 1;
++	}
++
++#ifndef IRQF_TRIGGER_LOW
++#if defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++	dev_dbg(&_dev->dev, "Calling set_irq_type\n");
++	set_irq_type(devirq,
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++                     IRQT_LOW
++#else
++                     IRQ_TYPE_LEVEL_LOW
++#endif
++                    );
++#endif
++#endif /*IRQF_TRIGGER_LOW*/
++
++	/*
++	 * Initialize the DWC_otg core.
++	 */
++	dev_dbg(&_dev->dev, "Calling dwc_otg_core_init\n");
++	dwc_otg_core_init(dwc_otg_device->core_if);
++
++#ifndef DWC_HOST_ONLY
++	/*
++	 * Initialize the PCD
++	 */
++	dev_dbg(&_dev->dev, "Calling pcd_init\n");
++	retval = pcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("pcd_init failed\n");
++		dwc_otg_device->pcd = NULL;
++		goto fail;
++	}
++#endif
++#ifndef DWC_DEVICE_ONLY
++	/*
++	 * Initialize the HCD
++	 */
++	dev_dbg(&_dev->dev, "Calling hcd_init\n");
++	retval = hcd_init(_dev);
++	if (retval != 0) {
++		DWC_ERROR("hcd_init failed\n");
++		dwc_otg_device->hcd = NULL;
++		goto fail;
++	}
++#endif
++        /* Recover from drvdata having been overwritten by hcd_init() */
++#ifdef LM_INTERFACE
++	lm_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PLATFORM_INTERFACE)
++	platform_set_drvdata(_dev, dwc_otg_device);
++#elif defined(PCI_INTERFACE)
++	pci_set_drvdata(_dev, dwc_otg_device);
++	dwc_otg_device->os_dep.pcidev = _dev;
++#endif
++
++	/*
++	 * Enable the global interrupt after all the interrupt
++	 * handlers are installed if there is no ADP support else
++	 * perform initial actions required for Internal ADP logic.
++	 */
++	if (!dwc_otg_get_param_adp_enable(dwc_otg_device->core_if)) {
++	        dev_dbg(&_dev->dev, "Calling enable_global_interrupts\n");
++		dwc_otg_enable_global_interrupts(dwc_otg_device->core_if);
++	        dev_dbg(&_dev->dev, "Done\n");
++	} else
++		dwc_otg_adp_start(dwc_otg_device->core_if,
++							dwc_otg_is_host_mode(dwc_otg_device->core_if));
++
++	return 0;
++
++fail:
++	dwc_otg_driver_remove(_dev);
++	return retval;
++}
++
++/**
++ * This structure defines the methods to be called by a bus driver
++ * during the lifecycle of a device on that bus. Both drivers and
++ * devices are registered with a bus driver. The bus driver matches
++ * devices to drivers based on information in the device and driver
++ * structures.
++ *
++ * The probe function is called when the bus driver matches a device
++ * to this driver. The remove function is called when a device is
++ * unregistered with the bus driver.
++ */
++#ifdef LM_INTERFACE
++static struct lm_driver dwc_otg_driver = {
++	.drv = {.name = (char *)dwc_driver_name,},
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // 'suspend' and 'resume' absent
++};
++#elif defined(PCI_INTERFACE)
++static const struct pci_device_id pci_ids[] = { {
++						 PCI_DEVICE(0x16c3, 0xabcd),
++						 .driver_data =
++						 (unsigned long)0xdeadbeef,
++						 }, { /* end: all zeroes */ }
++};
++
++MODULE_DEVICE_TABLE(pci, pci_ids);
++
++/* pci driver glue; this is a "new style" PCI driver module */
++static struct pci_driver dwc_otg_driver = {
++	.name = "dwc_otg",
++	.id_table = pci_ids,
++
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++
++	.driver = {
++		   .name = (char *)dwc_driver_name,
++		   },
++};
++#elif defined(PLATFORM_INTERFACE)
++static struct platform_device_id platform_ids[] = {
++        {
++              .name = "bcm2708_usb",
++              .driver_data = (kernel_ulong_t) 0xdeadbeef,
++        },
++        { /* end: all zeroes */ }
++};
++MODULE_DEVICE_TABLE(platform, platform_ids);
++
++static struct platform_driver dwc_otg_driver = {
++	.driver = {
++		.name = (char *)dwc_driver_name,
++		},
++        .id_table = platform_ids,
++
++	.probe = dwc_otg_driver_probe,
++	.remove = dwc_otg_driver_remove,
++        // no 'shutdown', 'suspend', 'resume', 'suspend_late' or 'resume_early'
++};
++#endif
++
++/**
++ * This function is called when the dwc_otg_driver is installed with the
++ * insmod command. It registers the dwc_otg_driver structure with the
++ * appropriate bus driver. This will cause the dwc_otg_driver_probe function
++ * to be called. In addition, the bus driver will automatically expose
++ * attributes defined for the device and driver in the special sysfs file
++ * system.
++ *
++ * @return
++ */
++static int __init dwc_otg_driver_init(void)
++{
++	int retval = 0;
++	int error;
++        struct device_driver *drv;
++	printk(KERN_INFO "%s: version %s (%s bus)\n", dwc_driver_name,
++	       DWC_DRIVER_VERSION,
++#ifdef LM_INTERFACE
++               "logicmodule");
++	retval = lm_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.drv;
++#elif defined(PCI_INTERFACE)
++               "pci");
++	retval = pci_register_driver(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#elif defined(PLATFORM_INTERFACE)
++               "platform");
++	retval = platform_driver_register(&dwc_otg_driver);
++        drv = &dwc_otg_driver.driver;
++#endif
++	if (retval < 0) {
++		printk(KERN_ERR "%s retval=%d\n", __func__, retval);
++		return retval;
++	}
++
++	error = driver_create_file(drv, &driver_attr_version);
++#ifdef DEBUG
++	error = driver_create_file(drv, &driver_attr_debuglevel);
++#endif
++	return retval;
++}
++
++module_init(dwc_otg_driver_init);
++
++/**
++ * This function is called when the driver is removed from the kernel
++ * with the rmmod command. The driver unregisters itself with its bus
++ * driver.
++ *
++ */
++static void __exit dwc_otg_driver_cleanup(void)
++{
++	printk(KERN_DEBUG "dwc_otg_driver_cleanup()\n");
++
++#ifdef LM_INTERFACE
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.drv, &driver_attr_version);
++	lm_driver_unregister(&dwc_otg_driver);
++#elif defined(PCI_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	pci_unregister_driver(&dwc_otg_driver);
++#elif defined(PLATFORM_INTERFACE)
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_debuglevel);
++	driver_remove_file(&dwc_otg_driver.driver, &driver_attr_version);
++	platform_driver_unregister(&dwc_otg_driver);
++#endif
++
++	printk(KERN_INFO "%s module removed\n", dwc_driver_name);
++}
++
++module_exit(dwc_otg_driver_cleanup);
++
++MODULE_DESCRIPTION(DWC_DRIVER_DESC);
++MODULE_AUTHOR("Synopsys Inc.");
++MODULE_LICENSE("GPL");
++
++module_param_named(otg_cap, dwc_otg_module_params.otg_cap, int, 0444);
++MODULE_PARM_DESC(otg_cap, "OTG Capabilities 0=HNP&SRP 1=SRP Only 2=None");
++module_param_named(opt, dwc_otg_module_params.opt, int, 0444);
++MODULE_PARM_DESC(opt, "OPT Mode");
++module_param_named(dma_enable, dwc_otg_module_params.dma_enable, int, 0444);
++MODULE_PARM_DESC(dma_enable, "DMA Mode 0=Slave 1=DMA enabled");
++
++module_param_named(dma_desc_enable, dwc_otg_module_params.dma_desc_enable, int,
++		   0444);
++MODULE_PARM_DESC(dma_desc_enable,
++		 "DMA Desc Mode 0=Address DMA 1=DMA Descriptor enabled");
++
++module_param_named(dma_burst_size, dwc_otg_module_params.dma_burst_size, int,
++		   0444);
++MODULE_PARM_DESC(dma_burst_size,
++		 "DMA Burst Size 1, 4, 8, 16, 32, 64, 128, 256");
++module_param_named(speed, dwc_otg_module_params.speed, int, 0444);
++MODULE_PARM_DESC(speed, "Speed 0=High Speed 1=Full Speed");
++module_param_named(host_support_fs_ls_low_power,
++		   dwc_otg_module_params.host_support_fs_ls_low_power, int,
++		   0444);
++MODULE_PARM_DESC(host_support_fs_ls_low_power,
++		 "Support Low Power w/FS or LS 0=Support 1=Don't Support");
++module_param_named(host_ls_low_power_phy_clk,
++		   dwc_otg_module_params.host_ls_low_power_phy_clk, int, 0444);
++MODULE_PARM_DESC(host_ls_low_power_phy_clk,
++		 "Low Speed Low Power Clock 0=48Mhz 1=6Mhz");
++module_param_named(enable_dynamic_fifo,
++		   dwc_otg_module_params.enable_dynamic_fifo, int, 0444);
++MODULE_PARM_DESC(enable_dynamic_fifo, "0=cC Setting 1=Allow Dynamic Sizing");
++module_param_named(data_fifo_size, dwc_otg_module_params.data_fifo_size, int,
++		   0444);
++MODULE_PARM_DESC(data_fifo_size,
++		 "Total number of words in the data FIFO memory 32-32768");
++module_param_named(dev_rx_fifo_size, dwc_otg_module_params.dev_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(dev_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(dev_nperio_tx_fifo_size,
++		   dwc_otg_module_params.dev_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(dev_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(dev_perio_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_1,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_2,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_3,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_4,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_5,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_6,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_7,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_8,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_9,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_10,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_11,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_12,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_13,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_14,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(dev_perio_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_perio_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_perio_tx_fifo_size_15,
++		 "Number of words in the periodic Tx FIFO 4-768");
++module_param_named(host_rx_fifo_size, dwc_otg_module_params.host_rx_fifo_size,
++		   int, 0444);
++MODULE_PARM_DESC(host_rx_fifo_size, "Number of words in the Rx FIFO 16-32768");
++module_param_named(host_nperio_tx_fifo_size,
++		   dwc_otg_module_params.host_nperio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_nperio_tx_fifo_size,
++		 "Number of words in the non-periodic Tx FIFO 16-32768");
++module_param_named(host_perio_tx_fifo_size,
++		   dwc_otg_module_params.host_perio_tx_fifo_size, int, 0444);
++MODULE_PARM_DESC(host_perio_tx_fifo_size,
++		 "Number of words in the host periodic Tx FIFO 16-32768");
++module_param_named(max_transfer_size, dwc_otg_module_params.max_transfer_size,
++		   int, 0444);
++/** @todo Set the max to 512K, modify checks */
++MODULE_PARM_DESC(max_transfer_size,
++		 "The maximum transfer size supported in bytes 2047-65535");
++module_param_named(max_packet_count, dwc_otg_module_params.max_packet_count,
++		   int, 0444);
++MODULE_PARM_DESC(max_packet_count,
++		 "The maximum number of packets in a transfer 15-511");
++module_param_named(host_channels, dwc_otg_module_params.host_channels, int,
++		   0444);
++MODULE_PARM_DESC(host_channels,
++		 "The number of host channel registers to use 1-16");
++module_param_named(dev_endpoints, dwc_otg_module_params.dev_endpoints, int,
++		   0444);
++MODULE_PARM_DESC(dev_endpoints,
++		 "The number of endpoints in addition to EP0 available for device mode 1-15");
++module_param_named(phy_type, dwc_otg_module_params.phy_type, int, 0444);
++MODULE_PARM_DESC(phy_type, "0=Reserved 1=UTMI+ 2=ULPI");
++module_param_named(phy_utmi_width, dwc_otg_module_params.phy_utmi_width, int,
++		   0444);
++MODULE_PARM_DESC(phy_utmi_width, "Specifies the UTMI+ Data Width 8 or 16 bits");
++module_param_named(phy_ulpi_ddr, dwc_otg_module_params.phy_ulpi_ddr, int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ddr,
++		 "ULPI at double or single data rate 0=Single 1=Double");
++module_param_named(phy_ulpi_ext_vbus, dwc_otg_module_params.phy_ulpi_ext_vbus,
++		   int, 0444);
++MODULE_PARM_DESC(phy_ulpi_ext_vbus,
++		 "ULPI PHY using internal or external vbus 0=Internal");
++module_param_named(i2c_enable, dwc_otg_module_params.i2c_enable, int, 0444);
++MODULE_PARM_DESC(i2c_enable, "FS PHY Interface");
++module_param_named(ulpi_fs_ls, dwc_otg_module_params.ulpi_fs_ls, int, 0444);
++MODULE_PARM_DESC(ulpi_fs_ls, "ULPI PHY FS/LS mode only");
++module_param_named(ts_dline, dwc_otg_module_params.ts_dline, int, 0444);
++MODULE_PARM_DESC(ts_dline, "Term select Dline pulsing for all PHYs");
++module_param_named(debug, g_dbg_lvl, int, 0444);
++MODULE_PARM_DESC(debug, "");
++
++module_param_named(en_multiple_tx_fifo,
++		   dwc_otg_module_params.en_multiple_tx_fifo, int, 0444);
++MODULE_PARM_DESC(en_multiple_tx_fifo,
++		 "Dedicated Non Periodic Tx FIFOs 0=disabled 1=enabled");
++module_param_named(dev_tx_fifo_size_1,
++		   dwc_otg_module_params.dev_tx_fifo_size[0], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_1, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_2,
++		   dwc_otg_module_params.dev_tx_fifo_size[1], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_2, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_3,
++		   dwc_otg_module_params.dev_tx_fifo_size[2], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_3, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_4,
++		   dwc_otg_module_params.dev_tx_fifo_size[3], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_4, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_5,
++		   dwc_otg_module_params.dev_tx_fifo_size[4], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_5, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_6,
++		   dwc_otg_module_params.dev_tx_fifo_size[5], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_6, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_7,
++		   dwc_otg_module_params.dev_tx_fifo_size[6], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_7, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_8,
++		   dwc_otg_module_params.dev_tx_fifo_size[7], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_8, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_9,
++		   dwc_otg_module_params.dev_tx_fifo_size[8], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_9, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_10,
++		   dwc_otg_module_params.dev_tx_fifo_size[9], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_10, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_11,
++		   dwc_otg_module_params.dev_tx_fifo_size[10], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_11, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_12,
++		   dwc_otg_module_params.dev_tx_fifo_size[11], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_12, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_13,
++		   dwc_otg_module_params.dev_tx_fifo_size[12], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_13, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_14,
++		   dwc_otg_module_params.dev_tx_fifo_size[13], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_14, "Number of words in the Tx FIFO 4-768");
++module_param_named(dev_tx_fifo_size_15,
++		   dwc_otg_module_params.dev_tx_fifo_size[14], int, 0444);
++MODULE_PARM_DESC(dev_tx_fifo_size_15, "Number of words in the Tx FIFO 4-768");
++
++module_param_named(thr_ctl, dwc_otg_module_params.thr_ctl, int, 0444);
++MODULE_PARM_DESC(thr_ctl,
++		 "Thresholding enable flag bit 0 - non ISO Tx thr., 1 - ISO Tx thr., 2 - Rx thr.- bit 0=disabled 1=enabled");
++module_param_named(tx_thr_length, dwc_otg_module_params.tx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(tx_thr_length, "Tx Threshold length in 32 bit DWORDs");
++module_param_named(rx_thr_length, dwc_otg_module_params.rx_thr_length, int,
++		   0444);
++MODULE_PARM_DESC(rx_thr_length, "Rx Threshold length in 32 bit DWORDs");
++
++module_param_named(pti_enable, dwc_otg_module_params.pti_enable, int, 0444);
++module_param_named(mpi_enable, dwc_otg_module_params.mpi_enable, int, 0444);
++module_param_named(lpm_enable, dwc_otg_module_params.lpm_enable, int, 0444);
++MODULE_PARM_DESC(lpm_enable, "LPM Enable 0=LPM Disabled 1=LPM Enabled");
++module_param_named(ic_usb_cap, dwc_otg_module_params.ic_usb_cap, int, 0444);
++MODULE_PARM_DESC(ic_usb_cap,
++		 "IC_USB Capability 0=IC_USB Disabled 1=IC_USB Enabled");
++module_param_named(ahb_thr_ratio, dwc_otg_module_params.ahb_thr_ratio, int,
++		   0444);
++MODULE_PARM_DESC(ahb_thr_ratio, "AHB Threshold Ratio");
++module_param_named(power_down, dwc_otg_module_params.power_down, int, 0444);
++MODULE_PARM_DESC(power_down, "Power Down Mode");
++module_param_named(reload_ctl, dwc_otg_module_params.reload_ctl, int, 0444);
++MODULE_PARM_DESC(reload_ctl, "HFIR Reload Control");
++module_param_named(dev_out_nak, dwc_otg_module_params.dev_out_nak, int, 0444);
++MODULE_PARM_DESC(dev_out_nak, "Enable Device OUT NAK");
++module_param_named(cont_on_bna, dwc_otg_module_params.cont_on_bna, int, 0444);
++MODULE_PARM_DESC(cont_on_bna, "Enable Enable Continue on BNA");
++module_param_named(ahb_single, dwc_otg_module_params.ahb_single, int, 0444);
++MODULE_PARM_DESC(ahb_single, "Enable AHB Single Support");
++module_param_named(adp_enable, dwc_otg_module_params.adp_enable, int, 0444);
++MODULE_PARM_DESC(adp_enable, "ADP Enable 0=ADP Disabled 1=ADP Enabled");
++module_param_named(otg_ver, dwc_otg_module_params.otg_ver, int, 0444);
++MODULE_PARM_DESC(otg_ver, "OTG revision supported 0=OTG 1.3 1=OTG 2.0");
++module_param(microframe_schedule, bool, 0444);
++MODULE_PARM_DESC(microframe_schedule, "Enable the microframe scheduler");
++
++/** @page "Module Parameters"
++ *
++ * The following parameters may be specified when starting the module.
++ * These parameters define how the DWC_otg controller should be
++ * configured. Parameter values are passed to the CIL initialization
++ * function dwc_otg_cil_init
++ *
++ * Example: <code>modprobe dwc_otg speed=1 otg_cap=1</code>
++ *
++
++ <table>
++ <tr><td>Parameter Name</td><td>Meaning</td></tr>
++
++ <tr>
++ <td>otg_cap</td>
++ <td>Specifies the OTG capabilities. The driver will automatically detect the
++ value for this parameter if none is specified.
++ - 0: HNP and SRP capable (default, if available)
++ - 1: SRP Only capable
++ - 2: No HNP/SRP capable
++ </td></tr>
++
++ <tr>
++ <td>dma_enable</td>
++ <td>Specifies whether to use slave or DMA mode for accessing the data FIFOs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Slave
++ - 1: DMA (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dma_burst_size</td>
++ <td>The DMA Burst size (applicable only for External DMA Mode).
++ - Values: 1, 4, 8 16, 32, 64, 128, 256 (default 32)
++ </td></tr>
++
++ <tr>
++ <td>speed</td>
++ <td>Specifies the maximum speed of operation in host and device mode. The
++ actual speed depends on the speed of the attached device and the value of
++ phy_type.
++ - 0: High Speed (default)
++ - 1: Full Speed
++ </td></tr>
++
++ <tr>
++ <td>host_support_fs_ls_low_power</td>
++ <td>Specifies whether low power mode is supported when attached to a Full
++ Speed or Low Speed device in host mode.
++ - 0: Don't support low power mode (default)
++ - 1: Support low power mode
++ </td></tr>
++
++ <tr>
++ <td>host_ls_low_power_phy_clk</td>
++ <td>Specifies the PHY clock rate in low power mode when connected to a Low
++ Speed device in host mode. This parameter is applicable only if
++ HOST_SUPPORT_FS_LS_LOW_POWER is enabled.
++ - 0: 48 MHz (default)
++ - 1: 6 MHz
++ </td></tr>
++
++ <tr>
++ <td>enable_dynamic_fifo</td>
++ <td> Specifies whether FIFOs may be resized by the driver software.
++ - 0: Use cC FIFO size parameters
++ - 1: Allow dynamic FIFO sizing (default)
++ </td></tr>
++
++ <tr>
++ <td>data_fifo_size</td>
++ <td>Total number of 4-byte words in the data FIFO memory. This memory
++ includes the Rx FIFO, non-periodic Tx FIFO, and periodic Tx FIFOs.
++ - Values: 32 to 32768 (default 8192)
++
++ Note: The total FIFO memory depth in the FPGA configuration is 8192.
++ </td></tr>
++
++ <tr>
++ <td>dev_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in device mode when dynamic
++ FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1064)
++ </td></tr>
++
++ <tr>
++ <td>dev_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in device mode when
++ dynamic FIFO sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>dev_perio_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the periodic Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>host_rx_fifo_size</td>
++ <td>Number of 4-byte words in the Rx FIFO in host mode when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_nperio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the non-periodic Tx FIFO in host mode when
++ dynamic FIFO sizing is enabled in the core.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>host_perio_tx_fifo_size</td>
++ <td>Number of 4-byte words in the host periodic Tx FIFO when dynamic FIFO
++ sizing is enabled.
++ - Values: 16 to 32768 (default 1024)
++ </td></tr>
++
++ <tr>
++ <td>max_transfer_size</td>
++ <td>The maximum transfer size supported in bytes.
++ - Values: 2047 to 65,535 (default 65,535)
++ </td></tr>
++
++ <tr>
++ <td>max_packet_count</td>
++ <td>The maximum number of packets in a transfer.
++ - Values: 15 to 511 (default 511)
++ </td></tr>
++
++ <tr>
++ <td>host_channels</td>
++ <td>The number of host channel registers to use.
++ - Values: 1 to 16 (default 12)
++
++ Note: The FPGA configuration supports a maximum of 12 host channels.
++ </td></tr>
++
++ <tr>
++ <td>dev_endpoints</td>
++ <td>The number of endpoints in addition to EP0 available for device mode
++ operations.
++ - Values: 1 to 15 (default 6 IN and OUT)
++
++ Note: The FPGA configuration supports a maximum of 6 IN and OUT endpoints in
++ addition to EP0.
++ </td></tr>
++
++ <tr>
++ <td>phy_type</td>
++ <td>Specifies the type of PHY interface to use. By default, the driver will
++ automatically detect the phy_type.
++ - 0: Full Speed
++ - 1: UTMI+ (default, if available)
++ - 2: ULPI
++ </td></tr>
++
++ <tr>
++ <td>phy_utmi_width</td>
++ <td>Specifies the UTMI+ Data Width. This parameter is applicable for a
++ phy_type of UTMI+. Also, this parameter is applicable only if the
++ OTG_HSPHY_WIDTH cC parameter was set to "8 and 16 bits", meaning that the
++ core has been configured to work at either data path width.
++ - Values: 8 or 16 bits (default 16)
++ </td></tr>
++
++ <tr>
++ <td>phy_ulpi_ddr</td>
++ <td>Specifies whether the ULPI operates at double or single data rate. This
++ parameter is only applicable if phy_type is ULPI.
++ - 0: single data rate ULPI interface with 8 bit wide data bus (default)
++ - 1: double data rate ULPI interface with 4 bit wide data bus
++ </td></tr>
++
++ <tr>
++ <td>i2c_enable</td>
++ <td>Specifies whether to use the I2C interface for full speed PHY. This
++ parameter is only applicable if PHY_TYPE is FS.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ulpi_fs_ls</td>
++ <td>Specifies whether to use ULPI FS/LS mode only.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>ts_dline</td>
++ <td>Specifies whether term select D-Line pulsing for all PHYs is enabled.
++ - 0: Disabled (default)
++ - 1: Enabled
++ </td></tr>
++
++ <tr>
++ <td>en_multiple_tx_fifo</td>
++ <td>Specifies whether dedicatedto tx fifos are enabled for non periodic IN EPs.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Disabled
++ - 1: Enabled (default, if available)
++ </td></tr>
++
++ <tr>
++ <td>dev_tx_fifo_size_n (n = 1 to 15)</td>
++ <td>Number of 4-byte words in each of the Tx FIFOs in device mode
++ when dynamic FIFO sizing is enabled.
++ - Values: 4 to 768 (default 256)
++ </td></tr>
++
++ <tr>
++ <td>tx_thr_length</td>
++ <td>Transmit Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++ <tr>
++ <td>rx_thr_length</td>
++ <td>Receive Threshold length in 32 bit double words
++ - Values: 8 to 128 (default 64)
++ </td></tr>
++
++<tr>
++ <td>thr_ctl</td>
++ <td>Specifies whether to enable Thresholding for Device mode. Bits 0, 1, 2 of
++ this parmater specifies if thresholding is enabled for non-Iso Tx, Iso Tx and
++ Rx transfers accordingly.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - Values: 0 to 7 (default 0)
++ Bit values indicate:
++ - 0: Thresholding disabled
++ - 1: Thresholding enabled
++ </td></tr>
++
++<tr>
++ <td>dma_desc_enable</td>
++ <td>Specifies whether to enable Descriptor DMA mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Descriptor DMA disabled
++ - 1: Descriptor DMA (default, if available)
++ </td></tr>
++
++<tr>
++ <td>mpi_enable</td>
++ <td>Specifies whether to enable MPI enhancement mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: MPI disabled (default)
++ - 1: MPI enable
++ </td></tr>
++
++<tr>
++ <td>pti_enable</td>
++ <td>Specifies whether to enable PTI enhancement support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: PTI disabled (default)
++ - 1: PTI enable
++ </td></tr>
++
++<tr>
++ <td>lpm_enable</td>
++ <td>Specifies whether to enable LPM support.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: LPM disabled
++ - 1: LPM enable (default, if available)
++ </td></tr>
++
++<tr>
++ <td>ic_usb_cap</td>
++ <td>Specifies whether to enable IC_USB capability.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: IC_USB disabled (default, if available)
++ - 1: IC_USB enable
++ </td></tr>
++
++<tr>
++ <td>ahb_thr_ratio</td>
++ <td>Specifies AHB Threshold ratio.
++ - Values: 0 to 3 (default 0)
++ </td></tr>
++
++<tr>
++ <td>power_down</td>
++ <td>Specifies Power Down(Hibernation) Mode.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: Power Down disabled (default)
++ - 2: Power Down enabled
++ </td></tr>
++
++ <tr>
++ <td>reload_ctl</td>
++ <td>Specifies whether dynamic reloading of the HFIR register is allowed during
++ run time. The driver will automatically detect the value for this parameter if
++ none is specified. In case the HFIR value is reloaded when HFIR.RldCtrl == 1'b0
++ the core might misbehave.
++ - 0: Reload Control disabled (default)
++ - 1: Reload Control enabled
++ </td></tr>
++
++ <tr>
++ <td>dev_out_nak</td>
++ <td>Specifies whether  Device OUT NAK enhancement enabled or no.
++ The driver will automatically detect the value for this parameter if
++ none is specified. This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ - 0: The core does not set NAK after Bulk OUT transfer complete (default)
++ - 1: The core sets NAK after Bulk OUT transfer complete
++ </td></tr>
++
++ <tr>
++ <td>cont_on_bna</td>
++ <td>Specifies whether Enable Continue on BNA enabled or no.
++ After receiving BNA interrupt the core disables the endpoint,when the
++ endpoint is re-enabled by the application the
++ - 0: Core starts processing from the DOEPDMA descriptor (default)
++ - 1: Core starts processing from the descriptor which received the BNA.
++ This parameter is valid only when OTG_EN_DESC_DMA == 1b1.
++ </td></tr>
++
++ <tr>
++ <td>ahb_single</td>
++ <td>This bit when programmed supports SINGLE transfers for remainder data
++ in a transfer for DMA mode of operation.
++ - 0: The remainder data will be sent using INCR burst size (default)
++ - 1: The remainder data will be sent using SINGLE burst size.
++ </td></tr>
++
++<tr>
++ <td>adp_enable</td>
++ <td>Specifies whether ADP feature is enabled.
++ The driver will automatically detect the value for this parameter if none is
++ specified.
++ - 0: ADP feature disabled (default)
++ - 1: ADP feature enabled
++ </td></tr>
++
++  <tr>
++ <td>otg_ver</td>
++ <td>Specifies whether OTG is performing as USB OTG Revision 2.0 or Revision 1.3
++ USB OTG device.
++ - 0: OTG 2.0 support disabled (default)
++ - 1: OTG 2.0 support enabled
++ </td></tr>
++
++*/
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_driver.h b/drivers/usb/host/dwc_otg/dwc_otg_driver.h
+new file mode 100644
+index 0000000..6a8be63
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_driver.h
+@@ -0,0 +1,86 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_driver.h $
++ * $Revision: #19 $
++ * $Date: 2010/11/15 $
++ * $Change: 1627671 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_DRIVER_H__
++#define __DWC_OTG_DRIVER_H__
++
++/** @file
++ * This file contains the interface to the Linux driver.
++ */
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_core_if.h"
++
++/* Type declarations */
++struct dwc_otg_pcd;
++struct dwc_otg_hcd;
++
++/**
++ * This structure is a wrapper that encapsulates the driver components used to
++ * manage a single DWC_otg controller.
++ */
++typedef struct dwc_otg_device {
++	/** Structure containing OS-dependent stuff. KEEP THIS STRUCT AT THE
++	 * VERY BEGINNING OF THE DEVICE STRUCT. OSes such as FreeBSD and NetBSD
++	 * require this. */
++	struct os_dependent os_dep;
++
++	/** Pointer to the core interface structure. */
++	dwc_otg_core_if_t *core_if;
++
++	/** Pointer to the PCD structure. */
++	struct dwc_otg_pcd *pcd;
++
++	/** Pointer to the HCD structure. */
++	struct dwc_otg_hcd *hcd;
++
++	/** Flag to indicate whether the common IRQ handler is installed. */
++	uint8_t common_irq_installed;
++
++} dwc_otg_device_t;
++
++/*We must clear S3C24XX_EINTPEND external interrupt register
++ * because after clearing in this register trigerred IRQ from
++ * H/W core in kernel interrupt can be occured again before OTG
++ * handlers clear all IRQ sources of Core registers because of
++ * timing latencies and Low Level IRQ Type.
++ */
++#ifdef CONFIG_MACH_IPMATE
++#define  S3C2410X_CLEAR_EINTPEND()   \
++do { \
++	__raw_writel(1UL << 11,S3C24XX_EINTPEND); \
++} while (0)
++#else
++#define  S3C2410X_CLEAR_EINTPEND()   do { } while (0)
++#endif
++
++#endif
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+new file mode 100644
+index 0000000..ab935c0
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.c
+@@ -0,0 +1,3473 @@
++
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.c $
++ * $Revision: #104 $
++ * $Date: 2011/10/24 $
++ * $Change: 1871159 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file implements HCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * Interface provided by HCD Core is defined in <code><hcd_if.h></code>
++ * header file.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++//#define DEBUG_HOST_CHANNELS
++#ifdef DEBUG_HOST_CHANNELS
++static int last_sel_trans_num_per_scheduled = 0;
++static int last_sel_trans_num_nonper_scheduled = 0;
++static int last_sel_trans_num_avail_hc_at_start = 0;
++static int last_sel_trans_num_avail_hc_at_end = 0;
++#endif /* DEBUG_HOST_CHANNELS */
++
++dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void)
++{
++	return DWC_ALLOC(sizeof(dwc_otg_hcd_t));
++}
++
++/**
++ * Connection timeout function.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.
++ */
++void dwc_otg_hcd_connect_timeout(void *ptr)
++{
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, ptr);
++	DWC_PRINTF("Connect Timeout\n");
++	__DWC_ERROR("Device Not Connected/Responding\n");
++}
++
++#if defined(DEBUG)
++static void dump_channel_info(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	if (qh->channel != NULL) {
++		dwc_hc_t *hc = qh->channel;
++		dwc_list_link_t *item;
++		dwc_otg_qh_t *qh_item;
++		int num_channels = hcd->core_if->core_params->host_channels;
++		int i;
++
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++		hcsplt_data_t hcsplt;
++		hctsiz_data_t hctsiz;
++		uint32_t hcdma;
++
++		hc_regs = hcd->core_if->host_if->hc_regs[hc->hc_num];
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++		DWC_PRINTF("  Assigned to channel %p:\n", hc);
++		DWC_PRINTF("    hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32,
++			   hcsplt.d32);
++		DWC_PRINTF("    hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32,
++			   hcdma);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		DWC_PRINTF("  NP inactive sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_inactive) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  NP active sched:\n");
++		DWC_LIST_FOREACH(item, &hcd->non_periodic_sched_active) {
++			qh_item =
++			    DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++			DWC_PRINTF("    %p\n", qh_item);
++		}
++		DWC_PRINTF("  Channels: \n");
++		for (i = 0; i < num_channels; i++) {
++			dwc_hc_t *hc = hcd->hc_ptr_array[i];
++			DWC_PRINTF("    %2d: %p\n", i, hc);
++		}
++	}
++}
++#else
++#define dump_channel_info(hcd, qh)
++#endif /* DEBUG */
++
++/**
++ * Work queue function for starting the HCD when A-Cable is connected.
++ * The hcd_start() must be called in a process context.
++ */
++static void hcd_start_func(void *_vp)
++{
++	dwc_otg_hcd_t *hcd = (dwc_otg_hcd_t *) _vp;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s() %p\n", __func__, hcd);
++	if (hcd) {
++		hcd->fops->start(hcd);
++	}
++}
++
++static void del_xfer_timers(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int i;
++	int num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		DWC_TIMER_CANCEL(hcd->core_if->hc_xfer_timer[i]);
++	}
++#endif
++}
++
++static void del_timers(dwc_otg_hcd_t * hcd)
++{
++	del_xfer_timers(hcd);
++	DWC_TIMER_CANCEL(hcd->conn_timer);
++}
++
++/**
++ * Processes all the URBs in a single list of QHs. Completes them with
++ * -ETIMEDOUT and frees the QTD.
++ */
++static void kill_urbs_in_qh_list(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *qh_item;
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	DWC_LIST_FOREACH(qh_item, qh_list) {
++		qh = DWC_LIST_ENTRY(qh_item, dwc_otg_qh_t, qh_list_entry);
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp,
++					 &qh->qtd_list, qtd_list_entry) {
++			qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++			if (qtd->urb != NULL) {
++				hcd->fops->complete(hcd, qtd->urb->priv,
++						    qtd->urb, -DWC_E_TIMEOUT);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++			}
++
++		}
++	}
++}
++
++/**
++ * Responds with an error status of ETIMEDOUT to all URBs in the non-periodic
++ * and periodic schedules. The QTD associated with each URB is removed from
++ * the schedule and freed. This function may be called when a disconnect is
++ * detected or when the HCD is being stopped.
++ */
++static void kill_all_urbs(dwc_otg_hcd_t * hcd)
++{
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->non_periodic_sched_active);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_inactive);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_ready);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_assigned);
++	kill_urbs_in_qh_list(hcd, &hcd->periodic_sched_queued);
++}
++
++/**
++ * Start the connection timer.  An OTG host is required to display a
++ * message if the device does not connect within 10 seconds.  The
++ * timer is deleted if a port connect interrupt occurs before the
++ * timer expires.
++ */
++static void dwc_otg_hcd_start_connect_timer(dwc_otg_hcd_t * hcd)
++{
++	DWC_TIMER_SCHEDULE(hcd->conn_timer, 10000 /* 10 secs */ );
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_session_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd = p;
++	dwc_otg_hcd_start_connect_timer(dwc_otg_hcd);
++	return 1;
++}
++
++/**
++ * HCD Callback function for starting the HCD when A-Cable is
++ * connected.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_start_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++	dwc_otg_core_if_t *core_if;
++	hprt0_data_t hprt0;
++
++	core_if = dwc_otg_hcd->core_if;
++
++	if (core_if->op_state == B_HOST) {
++		/*
++		 * Reset the port.  During a HNP mode switch the reset
++		 * needs to occur within 1ms and have a duration of at
++		 * least 50ms.
++		 */
++		hprt0.d32 = dwc_otg_read_hprt0(core_if);
++		hprt0.b.prtrst = 1;
++		DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	}
++	DWC_WORKQ_SCHEDULE_DELAYED(core_if->wq_otg,
++				   hcd_start_func, dwc_otg_hcd, 50,
++				   "start hcd");
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for disconnect of the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_disconnect_cb(void *p)
++{
++	gintsts_data_t intr;
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	/*
++	 * Set status flags for the hub driver.
++	 */
++	dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++	dwc_otg_hcd->flags.b.port_connect_status = 0;
++
++	/*
++	 * Shutdown any transfers in process by clearing the Tx FIFO Empty
++	 * interrupt mask and status bits and disabling subsequent host
++	 * channel interrupts.
++	 */
++	intr.d32 = 0;
++	intr.b.nptxfempty = 1;
++	intr.b.ptxfempty = 1;
++	intr.b.hcintr = 1;
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintmsk,
++			 intr.d32, 0);
++	DWC_MODIFY_REG32(&dwc_otg_hcd->core_if->core_global_regs->gintsts,
++			 intr.d32, 0);
++
++	del_timers(dwc_otg_hcd);
++
++	/*
++	 * Turn off the vbus power only if the core has transitioned to device
++	 * mode. If still in host mode, need to keep power on to detect a
++	 * reconnection.
++	 */
++	if (dwc_otg_is_device_mode(dwc_otg_hcd->core_if)) {
++		if (dwc_otg_hcd->core_if->op_state != A_SUSPEND) {
++			hprt0_data_t hprt0 = {.d32 = 0 };
++			DWC_PRINTF("Disconnect: PortPower off\n");
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0,
++					hprt0.d32);
++		}
++
++		dwc_otg_disable_host_interrupts(dwc_otg_hcd->core_if);
++	}
++
++	/* Respond with an error status to all URBs in the schedule. */
++	kill_all_urbs(dwc_otg_hcd);
++
++	if (dwc_otg_is_host_mode(dwc_otg_hcd->core_if)) {
++		/* Clean up any host channels that were in use. */
++		int num_channels;
++		int i;
++		dwc_hc_t *channel;
++		dwc_otg_hc_regs_t *hc_regs;
++		hcchar_data_t hcchar;
++
++		num_channels = dwc_otg_hcd->core_if->core_params->host_channels;
++
++		if (!dwc_otg_hcd->core_if->dma_enable) {
++			/* Flush out any channel requests in slave mode. */
++			for (i = 0; i < num_channels; i++) {
++				channel = dwc_otg_hcd->hc_ptr_array[i];
++				if (DWC_CIRCLEQ_EMPTY_ENTRY
++				    (channel, hc_list_entry)) {
++					hc_regs =
++					    dwc_otg_hcd->core_if->
++					    host_if->hc_regs[i];
++					hcchar.d32 =
++					    DWC_READ_REG32(&hc_regs->hcchar);
++					if (hcchar.b.chen) {
++						hcchar.b.chen = 0;
++						hcchar.b.chdis = 1;
++						hcchar.b.epdir = 0;
++						DWC_WRITE_REG32
++						    (&hc_regs->hcchar,
++						     hcchar.d32);
++					}
++				}
++			}
++		}
++
++		for (i = 0; i < num_channels; i++) {
++			channel = dwc_otg_hcd->hc_ptr_array[i];
++			if (DWC_CIRCLEQ_EMPTY_ENTRY(channel, hc_list_entry)) {
++				hc_regs =
++				    dwc_otg_hcd->core_if->host_if->hc_regs[i];
++				hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++				if (hcchar.b.chen) {
++					/* Halt the channel. */
++					hcchar.b.chdis = 1;
++					DWC_WRITE_REG32(&hc_regs->hcchar,
++							hcchar.d32);
++				}
++
++				dwc_otg_hc_cleanup(dwc_otg_hcd->core_if,
++						   channel);
++				DWC_CIRCLEQ_INSERT_TAIL
++				    (&dwc_otg_hcd->free_hc_list, channel,
++				     hc_list_entry);
++				/*
++				 * Added for Descriptor DMA to prevent channel double cleanup
++				 * in release_channel_ddma(). Which called from ep_disable
++				 * when device disconnect.
++				 */
++				channel->qh = NULL;
++			}
++		}
++	}
++
++	if (dwc_otg_hcd->fops->disconnect) {
++		dwc_otg_hcd->fops->disconnect(dwc_otg_hcd);
++	}
++
++	return 1;
++}
++
++/**
++ * HCD Callback function for stopping the HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int32_t dwc_otg_hcd_stop_cb(void *p)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = p;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p)\n", __func__, p);
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++	return 1;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * HCD Callback function for sleep of HCD.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_sleep_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	dwc_otg_hcd_free_hc_from_lpm(hcd);
++
++	return 0;
++}
++#endif
++
++/**
++ * HCD Callback function for Remote Wakeup.
++ *
++ * @param p void pointer to the <code>struct usb_hcd</code>
++ */
++static int dwc_otg_hcd_rem_wakeup_cb(void *p)
++{
++	dwc_otg_hcd_t *hcd = p;
++
++	if (hcd->core_if->lx_state == DWC_OTG_L2) {
++		hcd->flags.b.port_suspend_change = 1;
++	}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	else {
++		hcd->flags.b.port_l1_change = 1;
++	}
++#endif
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd)
++{
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD STOP\n");
++
++	/*
++	 * The root hub should be disconnected before this function is called.
++	 * The disconnect will clear the QTD lists (via ..._hcd_urb_dequeue)
++	 * and the QH lists (via ..._hcd_endpoint_disable).
++	 */
++
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	/* Turn off the vbus power */
++	DWC_PRINTF("PortPower off\n");
++	hprt0.b.prtpwr = 0;
++	DWC_WRITE_REG32(hcd->core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(1);
++}
++
++int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb, void **ep_handle,
++			    int atomic_alloc)
++{
++	dwc_irqflags_t flags;
++	int retval = 0;
++	dwc_otg_qtd_t *qtd;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (NULL == hcd->core_if) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue - HCD has NULL core_if\n");
++		/* No longer connected. */
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (!hcd->flags.b.port_connect_status) {
++		/* No longer connected. */
++		DWC_ERROR("Not connected\n");
++		return -DWC_E_NO_DEVICE;
++	}
++
++	qtd = dwc_otg_hcd_qtd_create(dwc_otg_urb, atomic_alloc);
++	if (qtd == NULL) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed creating QTD\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (qtd->urb == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD with no URBs\n");
++		return -DWC_E_NO_MEMORY;
++	}
++	if (qtd->urb->priv == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Enqueue created QTD URB with no URB handle\n");
++		return -DWC_E_NO_MEMORY;
++	}
++#endif
++	retval =
++	    dwc_otg_hcd_qtd_add(qtd, hcd, (dwc_otg_qh_t **) ep_handle, atomic_alloc);
++            // creates a new queue in ep_handle if it doesn't exist already
++	if (retval < 0) {
++		DWC_ERROR("DWC OTG HCD URB Enqueue failed adding QTD. "
++			  "Error status %d\n", retval);
++		dwc_otg_hcd_qtd_free(qtd);
++	} else {
++		qtd->qh = *ep_handle;
++	}
++	intr_mask.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->gintmsk);
++	if (!intr_mask.b.sofintr && retval == 0) {
++		dwc_otg_transaction_type_e tr_type;
++		if ((qtd->qh->ep_type == UE_BULK)
++		    && !(qtd->urb->flags & URB_GIVEBACK_ASAP)) {
++			/* Do not schedule SG transactions until qtd has URB_GIVEBACK_ASAP set */
++			return 0;
++		}
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++		tr_type = dwc_otg_hcd_select_transactions(hcd);
++		if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++			dwc_otg_hcd_queue_transactions(hcd, tr_type);
++		}
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	}
++
++	return retval;
++}
++
++int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * hcd,
++			    dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	dwc_otg_qh_t *qh;
++	dwc_otg_qtd_t *urb_qtd;
++
++#ifdef DEBUG /* integrity checks (Broadcom) */
++
++	if (hcd == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL HCD\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue has NULL URB\n");
++		return -DWC_E_INVALID;
++	}
++	if (dwc_otg_urb->qtd == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with NULL QTD\n");
++		return -DWC_E_INVALID;
++	}
++	urb_qtd = dwc_otg_urb->qtd;
++	if (urb_qtd->qh == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue with QTD with NULL Q handler\n");
++		return -DWC_E_INVALID;
++	}
++#else
++	urb_qtd = dwc_otg_urb->qtd;
++#endif
++	qh = urb_qtd->qh;
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		if (urb_qtd->in_process) {
++			dump_channel_info(hcd, qh);
++		}
++	}
++#ifdef DEBUG /* integrity checks (Broadcom) */
++	if (hcd->core_if == NULL) {
++		DWC_ERROR("**** DWC OTG HCD URB Dequeue HCD has NULL core_if\n");
++		return -DWC_E_INVALID;
++	}
++#endif
++	if (urb_qtd->in_process && qh->channel) {
++		/* The QTD is in process (it has been assigned to a channel). */
++		if (hcd->flags.b.port_connect_status) {
++			/*
++			 * If still connected (i.e. in host mode), halt the
++			 * channel so it can be used for other transfers. If
++			 * no longer connected, the host registers can't be
++			 * written to halt the channel since the core is in
++			 * device mode.
++			 */
++			dwc_otg_hc_halt(hcd->core_if, qh->channel,
++					DWC_OTG_HC_XFER_URB_DEQUEUE);
++		}
++	}
++
++	/*
++	 * Free the QTD and clean up the associated QH. Leave the QH in the
++	 * schedule if it has any remaining QTDs.
++	 */
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue - "
++                    "delete %sQueue handler\n",
++                    hcd->core_if->dma_desc_enable?"DMA ":"");
++	if (!hcd->core_if->dma_desc_enable) {
++		uint8_t b = urb_qtd->in_process;
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++		if (b) {
++			dwc_otg_hcd_qh_deactivate(hcd, qh, 0);
++			qh->channel = NULL;
++		} else if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		}
++	} else {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, urb_qtd, qh);
++	}
++	return 0;
++}
++
++int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++				 int retry)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int retval = 0;
++	dwc_irqflags_t flags;
++
++	if (retry < 0) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	if (!qh) {
++		retval = -DWC_E_INVALID;
++		goto done;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++
++	while (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list) && retry) {
++		DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++		retry--;
++		dwc_msleep(5);
++		DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	}
++
++	dwc_otg_hcd_qh_remove(hcd, qh);
++
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	/*
++	 * Split dwc_otg_hcd_qh_remove_and_free() into qh_remove
++	 * and qh_free to prevent stack dump on DWC_DMA_FREE() with
++	 * irq_disabled (spinlock_irqsave) in dwc_otg_hcd_desc_list_free()
++	 * and dwc_otg_hcd_frame_list_alloc().
++	 */
++	dwc_otg_hcd_qh_free(hcd, qh);
++
++done:
++	return retval;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int retval = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	if (!qh)
++		return -DWC_E_INVALID;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	return retval;
++}
++#endif
++
++/**
++ * HCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t hcd_cil_callbacks = {
++	.start = dwc_otg_hcd_start_cb,
++	.stop = dwc_otg_hcd_stop_cb,
++	.disconnect = dwc_otg_hcd_disconnect_cb,
++	.session_start = dwc_otg_hcd_session_start_cb,
++	.resume_wakeup = dwc_otg_hcd_rem_wakeup_cb,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.sleep = dwc_otg_hcd_sleep_cb,
++#endif
++	.p = 0,
++};
++
++/**
++ * Reset tasklet function
++ */
++static void reset_tasklet_func(void *data)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = (dwc_otg_hcd_t *) data;
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	hprt0_data_t hprt0;
++
++	DWC_DEBUGPL(DBG_HCDV, "USB RESET tasklet called\n");
++
++	hprt0.d32 = dwc_otg_read_hprt0(core_if);
++	hprt0.b.prtrst = 1;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_mdelay(60);
++
++	hprt0.b.prtrst = 0;
++	DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++	dwc_otg_hcd->flags.b.port_reset_change = 1;
++}
++
++static void qh_list_free(dwc_otg_hcd_t * hcd, dwc_list_link_t * qh_list)
++{
++	dwc_list_link_t *item;
++	dwc_otg_qh_t *qh;
++	dwc_irqflags_t flags;
++
++	if (!qh_list->next) {
++		/* The list hasn't been initialized yet. */
++		return;
++	}
++	/*
++	 * Hold spinlock here. Not needed in that case if bellow
++	 * function is being called from ISR
++	 */
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	/* Ensure there are no QTDs or URBs left. */
++	kill_urbs_in_qh_list(hcd, qh_list);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++
++	DWC_LIST_FOREACH(item, qh_list) {
++		qh = DWC_LIST_ENTRY(item, dwc_otg_qh_t, qh_list_entry);
++		dwc_otg_hcd_qh_remove_and_free(hcd, qh);
++	}
++}
++
++/**
++ * Exit from Hibernation if Host did not detect SRP from connected SRP capable
++ * Device during SRP time by host power up.
++ */
++void dwc_otg_hcd_power_up(void *ptr)
++{
++	gpwrdn_data_t gpwrdn = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++
++	DWC_PRINTF("%s called\n", __FUNCTION__);
++
++	if (!core_if->hibernation_suspend) {
++		DWC_PRINTF("Already exited from Hibernation\n");
++		return;
++	}
++
++	/* Switch on the voltage to the core */
++	gpwrdn.b.pwrdnswtch = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Reset the core */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Disable power clamps */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnclmp = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	/* Remove reset the core signal */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pwrdnrstn = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0, gpwrdn.d32);
++	dwc_udelay(10);
++
++	/* Disable PMU interrupt */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuintsel = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->hibernation_suspend = 0;
++
++	/* Disable PMU */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.pmuactv = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++	dwc_udelay(10);
++
++	/* Enable VBUS */
++	gpwrdn.d32 = 0;
++	gpwrdn.b.dis_vbus = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, gpwrdn.d32, 0);
++
++	core_if->op_state = A_HOST;
++	dwc_otg_core_init(core_if);
++	dwc_otg_enable_global_interrupts(core_if);
++	cil_hcd_start(core_if);
++}
++
++/**
++ * Frees secondary storage associated with the dwc_otg_hcd structure contained
++ * in the struct usb_hcd field.
++ */
++static void dwc_otg_hcd_free(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD FREE\n");
++
++	del_timers(dwc_otg_hcd);
++
++	/* Free memory for QH/QTD lists */
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->non_periodic_sched_active);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_inactive);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_ready);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_assigned);
++	qh_list_free(dwc_otg_hcd, &dwc_otg_hcd->periodic_sched_queued);
++
++	/* Free memory for the host channels. */
++	for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++		dwc_hc_t *hc = dwc_otg_hcd->hc_ptr_array[i];
++
++#ifdef DEBUG
++		if (dwc_otg_hcd->core_if->hc_xfer_timer[i]) {
++			DWC_TIMER_FREE(dwc_otg_hcd->core_if->hc_xfer_timer[i]);
++		}
++#endif
++		if (hc != NULL) {
++			DWC_DEBUGPL(DBG_HCDV, "HCD Free channel #%i, hc=%p\n",
++				    i, hc);
++			DWC_FREE(hc);
++		}
++	}
++
++	if (dwc_otg_hcd->core_if->dma_enable) {
++		if (dwc_otg_hcd->status_buf_dma) {
++			DWC_DMA_FREE(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				     dwc_otg_hcd->status_buf,
++				     dwc_otg_hcd->status_buf_dma);
++		}
++	} else if (dwc_otg_hcd->status_buf != NULL) {
++		DWC_FREE(dwc_otg_hcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(dwc_otg_hcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	dwc_otg_hcd->core_if->lock = NULL;
++
++	DWC_TIMER_FREE(dwc_otg_hcd->conn_timer);
++	DWC_TASK_FREE(dwc_otg_hcd->reset_tasklet);
++
++#ifdef DWC_DEV_SRPCAP
++	if (dwc_otg_hcd->core_if->power_down == 2 &&
++	    dwc_otg_hcd->core_if->pwron_timer) {
++		DWC_TIMER_FREE(dwc_otg_hcd->core_if->pwron_timer);
++	}
++#endif
++	DWC_FREE(dwc_otg_hcd);
++}
++
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd);
++
++int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if)
++{
++	int retval = 0;
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++
++	hcd->lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "init of HCD %p given core_if %p\n",
++                    hcd, core_if);
++	if (!hcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(hcd);
++		retval = -DWC_E_NO_MEMORY;
++		goto out;
++	}
++	hcd->core_if = core_if;
++
++	/* Register the HCD CIL Callbacks */
++	dwc_otg_cil_register_hcd_callbacks(hcd->core_if,
++					   &hcd_cil_callbacks, hcd);
++
++	/* Initialize the non-periodic schedule. */
++	DWC_LIST_INIT(&hcd->non_periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->non_periodic_sched_active);
++
++	/* Initialize the periodic schedule. */
++	DWC_LIST_INIT(&hcd->periodic_sched_inactive);
++	DWC_LIST_INIT(&hcd->periodic_sched_ready);
++	DWC_LIST_INIT(&hcd->periodic_sched_assigned);
++	DWC_LIST_INIT(&hcd->periodic_sched_queued);
++
++	/*
++	 * Create a host channel descriptor for each host channel implemented
++	 * in the controller. Initialize the channel descriptor array.
++	 */
++	DWC_CIRCLEQ_INIT(&hcd->free_hc_list);
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_MEMSET(hcd->hc_ptr_array, 0, sizeof(hcd->hc_ptr_array));
++	for (i = 0; i < num_channels; i++) {
++		channel = DWC_ALLOC(sizeof(dwc_hc_t));
++		if (channel == NULL) {
++			retval = -DWC_E_NO_MEMORY;
++			DWC_ERROR("%s: host channel allocation failed\n",
++				  __func__);
++			dwc_otg_hcd_free(hcd);
++			goto out;
++		}
++		channel->hc_num = i;
++		hcd->hc_ptr_array[i] = channel;
++#ifdef DEBUG
++		hcd->core_if->hc_xfer_timer[i] =
++		    DWC_TIMER_ALLOC("hc timer", hc_xfer_timeout,
++				    &hcd->core_if->hc_xfer_info[i]);
++#endif
++		DWC_DEBUGPL(DBG_HCDV, "HCD Added channel #%d, hc=%p\n", i,
++			    channel);
++	}
++
++	/* Initialize the Connection timeout timer. */
++	hcd->conn_timer = DWC_TIMER_ALLOC("Connection timer",
++					  dwc_otg_hcd_connect_timeout, 0);
++
++	printk(KERN_DEBUG "dwc_otg: Microframe scheduler %s\n", microframe_schedule ? "enabled":"disabled");
++	if (microframe_schedule)
++		init_hcd_usecs(hcd);
++
++	/* Initialize reset tasklet. */
++	hcd->reset_tasklet = DWC_TASK_ALLOC("reset_tasklet", reset_tasklet_func, hcd);
++#ifdef DWC_DEV_SRPCAP
++	if (hcd->core_if->power_down == 2) {
++		/* Initialize Power on timer for Host power up in case hibernation */
++		hcd->core_if->pwron_timer = DWC_TIMER_ALLOC("PWRON TIMER",
++									dwc_otg_hcd_power_up, core_if);
++	}
++#endif
++
++	/*
++	 * Allocate space for storing data on status transactions. Normally no
++	 * data is sent, but this space acts as a bit bucket. This must be
++	 * done after usb_add_hcd since that function allocates the DMA buffer
++	 * pool.
++	 */
++	if (hcd->core_if->dma_enable) {
++		hcd->status_buf =
++		    DWC_DMA_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE,
++				  &hcd->status_buf_dma);
++	} else {
++		hcd->status_buf = DWC_ALLOC(DWC_OTG_HCD_STATUS_BUF_SIZE);
++	}
++	if (!hcd->status_buf) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: status_buf allocation failed\n", __func__);
++		dwc_otg_hcd_free(hcd);
++		goto out;
++	}
++
++	hcd->otg_port = 1;
++	hcd->frame_list = NULL;
++	hcd->frame_list_dma = 0;
++	hcd->periodic_qh_count = 0;
++out:
++	return retval;
++}
++
++void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd)
++{
++	/* Turn off all host-specific interrupts. */
++	dwc_otg_disable_host_interrupts(hcd->core_if);
++
++	dwc_otg_hcd_free(hcd);
++}
++
++/**
++ * Initializes dynamic portions of the DWC_otg HCD state.
++ */
++static void dwc_otg_hcd_reinit(dwc_otg_hcd_t * hcd)
++{
++	int num_channels;
++	int i;
++	dwc_hc_t *channel;
++	dwc_hc_t *channel_tmp;
++
++	hcd->flags.d32 = 0;
++
++	hcd->non_periodic_qh_ptr = &hcd->non_periodic_sched_active;
++	if (!microframe_schedule) {
++		hcd->non_periodic_channels = 0;
++		hcd->periodic_channels = 0;
++	} else {
++		hcd->available_host_channels = hcd->core_if->core_params->host_channels;
++	}
++	/*
++	 * Put all channels in the free channel list and clean up channel
++	 * states.
++	 */
++	DWC_CIRCLEQ_FOREACH_SAFE(channel, channel_tmp,
++				 &hcd->free_hc_list, hc_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&hcd->free_hc_list, channel, hc_list_entry);
++	}
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	for (i = 0; i < num_channels; i++) {
++		channel = hcd->hc_ptr_array[i];
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, channel,
++					hc_list_entry);
++		dwc_otg_hc_cleanup(hcd->core_if, channel);
++	}
++
++	/* Initialize the DWC core for host mode operation. */
++	dwc_otg_core_host_init(hcd->core_if);
++
++	/* Set core_if's lock pointer to the hcd->lock */
++	hcd->core_if->lock = hcd->lock;
++}
++
++/**
++ * Assigns transactions from a QTD to a free host channel and initializes the
++ * host channel to perform the transactions. The host channel is removed from
++ * the free list.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh Transactions from the first QTD for this QH are selected and
++ * assigned to a free host channel.
++ */
++static void assign_and_init_hc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_hc_t *hc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_hcd_urb_t *urb;
++	void* ptr = NULL;
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++
++	urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDV, "%s(%p,%p) - urb %x, actual_length %d\n", __func__, hcd, qh, (unsigned int)urb, urb->actual_length);
++
++	if (((urb->actual_length < 0) || (urb->actual_length > urb->length)) && !dwc_otg_hcd_is_pipe_in(&urb->pipe_info))
++		urb->actual_length = urb->length;
++
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	qh->channel = hc;
++
++	qtd->in_process = 1;
++
++	/*
++	 * Use usb_pipedevice to determine device address. This address is
++	 * 0 before the SET_ADDRESS command and the correct address afterward.
++	 */
++	hc->dev_addr = dwc_otg_hcd_get_dev_addr(&urb->pipe_info);
++	hc->ep_num = dwc_otg_hcd_get_ep_num(&urb->pipe_info);
++	hc->speed = qh->dev_speed;
++	hc->max_packet = dwc_max_packet(qh->maxp);
++
++	hc->xfer_started = 0;
++	hc->halt_status = DWC_OTG_HC_XFER_NO_HALT_STATUS;
++	hc->error_state = (qtd->error_count > 0);
++	hc->halt_on_queue = 0;
++	hc->halt_pending = 0;
++	hc->requests = 0;
++
++	/*
++	 * The following values may be modified in the transfer type section
++	 * below. The xfer_len value may be reduced when the transfer is
++	 * started to accommodate the max widths of the XferSize and PktCnt
++	 * fields in the HCTSIZn register.
++	 */
++
++	hc->ep_is_in = (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) != 0);
++	if (hc->ep_is_in) {
++		hc->do_ping = 0;
++	} else {
++		hc->do_ping = qh->ping_state;
++	}
++
++	hc->data_pid_start = qh->data_toggle;
++	hc->multi_count = 1;
++
++	if (hcd->core_if->dma_enable) {
++		hc->xfer_buff = (uint8_t *) urb->dma + urb->actual_length;
++
++		/* For non-dword aligned case */
++		if (((unsigned long)hc->xfer_buff & 0x3)
++		    && !hcd->core_if->dma_desc_enable) {
++			ptr = (uint8_t *) urb->buf + urb->actual_length;
++		}
++	} else {
++		hc->xfer_buff = (uint8_t *) urb->buf + urb->actual_length;
++	}
++	hc->xfer_len = urb->length - urb->actual_length;
++	hc->xfer_count = 0;
++
++	/*
++	 * Set the split attributes
++	 */
++	hc->do_split = 0;
++	if (qh->do_split) {
++		uint32_t hub_addr, port_addr;
++		hc->do_split = 1;
++		hc->xact_pos = qtd->isoc_split_pos;
++		hc->complete_split = qtd->complete_split;
++		hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &port_addr);
++		hc->hub_addr = (uint8_t) hub_addr;
++		hc->port_addr = (uint8_t) port_addr;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		hc->ep_type = DWC_OTG_EP_TYPE_CONTROL;
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction\n");
++			hc->do_ping = 0;
++			hc->ep_is_in = 0;
++			hc->data_pid_start = DWC_OTG_HC_PID_SETUP;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->setup_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->setup_packet;
++			}
++			hc->xfer_len = 8;
++			ptr = NULL;
++			break;
++		case DWC_OTG_CONTROL_DATA:
++			DWC_DEBUGPL(DBG_HCDV, "  Control data transaction\n");
++			hc->data_pid_start = qtd->data_toggle;
++			break;
++		case DWC_OTG_CONTROL_STATUS:
++			/*
++			 * Direction is opposite of data direction or IN if no
++			 * data.
++			 */
++			DWC_DEBUGPL(DBG_HCDV, "  Control status transaction\n");
++			if (urb->length == 0) {
++				hc->ep_is_in = 1;
++			} else {
++				hc->ep_is_in =
++				    dwc_otg_hcd_is_pipe_out(&urb->pipe_info);
++			}
++			if (hc->ep_is_in) {
++				hc->do_ping = 0;
++			}
++
++			hc->data_pid_start = DWC_OTG_HC_PID_DATA1;
++
++			hc->xfer_len = 0;
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf_dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) hcd->status_buf;
++			}
++			ptr = NULL;
++			break;
++		}
++		break;
++	case UE_BULK:
++		hc->ep_type = DWC_OTG_EP_TYPE_BULK;
++		break;
++	case UE_INTERRUPT:
++		hc->ep_type = DWC_OTG_EP_TYPE_INTR;
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++			hc->ep_type = DWC_OTG_EP_TYPE_ISOC;
++
++			if (hcd->core_if->dma_desc_enable)
++				break;
++
++			frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++
++			frame_desc->status = 0;
++
++			if (hcd->core_if->dma_enable) {
++				hc->xfer_buff = (uint8_t *) urb->dma;
++			} else {
++				hc->xfer_buff = (uint8_t *) urb->buf;
++			}
++			hc->xfer_buff +=
++			    frame_desc->offset + qtd->isoc_split_offset;
++			hc->xfer_len =
++			    frame_desc->length - qtd->isoc_split_offset;
++
++			/* For non-dword aligned buffers */
++			if (((unsigned long)hc->xfer_buff & 0x3)
++			    && hcd->core_if->dma_enable) {
++				ptr =
++				    (uint8_t *) urb->buf + frame_desc->offset +
++				    qtd->isoc_split_offset;
++			} else
++				ptr = NULL;
++
++			if (hc->xact_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++				if (hc->xfer_len <= 188) {
++					hc->xact_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				} else {
++					hc->xact_pos =
++					    DWC_HCSPLIT_XACTPOS_BEGIN;
++				}
++			}
++		}
++		break;
++	}
++	/* non DWORD-aligned buffer case */
++	if (ptr) {
++		uint32_t buf_size;
++		if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		} else {
++			buf_size = 4096;
++		}
++		if (!qh->dw_align_buf) {
++			qh->dw_align_buf = DWC_DMA_ALLOC_ATOMIC(buf_size,
++							 &qh->dw_align_buf_dma);
++			if (!qh->dw_align_buf) {
++				DWC_ERROR
++				    ("%s: Failed to allocate memory to handle "
++				     "non-dword aligned buffer case\n",
++				     __func__);
++				return;
++			}
++		}
++		if (!hc->ep_is_in) {
++			dwc_memcpy(qh->dw_align_buf, ptr, hc->xfer_len);
++		}
++		hc->align_buff = qh->dw_align_buf_dma;
++	} else {
++		hc->align_buff = 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++	    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++		/*
++		 * This value may be modified when the transfer is started to
++		 * reflect the actual transfer length.
++		 */
++		hc->multi_count = dwc_hb_mult(qh->maxp);
++	}
++
++	if (hcd->core_if->dma_desc_enable)
++		hc->desc_list_addr = qh->desc_list_dma;
++
++	dwc_otg_hc_init(hcd->core_if, hc);
++	hc->qh = qh;
++}
++
++/**
++ * This function selects transactions from the HCD transfer schedule and
++ * assigns them to available host channels. It is called from HCD interrupt
++ * handler functions.
++ *
++ * @param hcd The HCD state structure.
++ *
++ * @return The types of new transactions that were assigned to host channels.
++ */
++dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t * hcd)
++{
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	int num_channels;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC();
++	dwc_otg_transaction_type_e ret_val = DWC_OTG_TRANSACTION_NONE;
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "  Select Transactions\n");
++#endif
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_per_scheduled = 0;
++	last_sel_trans_num_nonper_scheduled = 0;
++	last_sel_trans_num_avail_hc_at_start = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	/* Process entries in the periodic ready list. */
++	qh_ptr = DWC_LIST_FIRST(&hcd->periodic_sched_ready);
++
++	while (qh_ptr != &hcd->periodic_sched_ready &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++		if (microframe_schedule) {
++			// Make sure we leave one channel for non periodic transactions.
++			DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++			if (hcd->available_host_channels <= 1) {
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++				break;
++			}
++			hcd->available_host_channels--;
++			DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++			last_sel_trans_num_per_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the periodic ready schedule to the
++		 * periodic assigned schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++
++		ret_val = DWC_OTG_TRANSACTION_PERIODIC;
++	}
++
++	/*
++	 * Process entries in the inactive portion of the non-periodic
++	 * schedule. Some free host channels may not be used if they are
++	 * reserved for periodic transfers.
++	 */
++	qh_ptr = hcd->non_periodic_sched_inactive.next;
++	num_channels = hcd->core_if->core_params->host_channels;
++	while (qh_ptr != &hcd->non_periodic_sched_inactive &&
++	       (microframe_schedule || hcd->non_periodic_channels <
++		num_channels - hcd->periodic_channels) &&
++	       !DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++
++		if (microframe_schedule) {
++				DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++				if (hcd->available_host_channels < 1) {
++					DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++					break;
++				}
++				hcd->available_host_channels--;
++				DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++#ifdef DEBUG_HOST_CHANNELS
++				last_sel_trans_num_nonper_scheduled++;
++#endif /* DEBUG_HOST_CHANNELS */
++		}
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		assign_and_init_hc(hcd, qh);
++
++		/*
++		 * Move the QH from the non-periodic inactive schedule to the
++		 * non-periodic active schedule.
++		 */
++		qh_ptr = DWC_LIST_NEXT(qh_ptr);
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		DWC_LIST_MOVE_HEAD(&hcd->non_periodic_sched_active,
++				   &qh->qh_list_entry);
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++
++		if (ret_val == DWC_OTG_TRANSACTION_NONE) {
++			ret_val = DWC_OTG_TRANSACTION_NON_PERIODIC;
++		} else {
++			ret_val = DWC_OTG_TRANSACTION_ALL;
++		}
++
++		if (!microframe_schedule)
++			hcd->non_periodic_channels++;
++	}
++
++#ifdef DEBUG_HOST_CHANNELS
++	last_sel_trans_num_avail_hc_at_end = hcd->available_host_channels;
++#endif /* DEBUG_HOST_CHANNELS */
++
++	DWC_SPINLOCK_FREE(channel_lock);
++	return ret_val;
++}
++
++/**
++ * Attempts to queue a single transaction request for a host channel
++ * associated with either a periodic or non-periodic transfer. This function
++ * assumes that there is space available in the appropriate request queue. For
++ * an OUT transfer or SETUP transaction in Slave mode, it checks whether space
++ * is available in the appropriate Tx FIFO.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc Host channel descriptor associated with either a periodic or
++ * non-periodic transfer.
++ * @param fifo_dwords_avail Number of DWORDs available in the periodic Tx
++ * FIFO for periodic transfers or the non-periodic Tx FIFO for non-periodic
++ * transfers.
++ *
++ * @return 1 if a request is queued and more requests may be needed to
++ * complete the transfer, 0 if no more requests are required for this
++ * transfer, -1 if there is insufficient space in the Tx FIFO.
++ */
++static int queue_transaction(dwc_otg_hcd_t * hcd,
++			     dwc_hc_t * hc, uint16_t fifo_dwords_avail)
++{
++	int retval;
++
++	if (hcd->core_if->dma_enable) {
++		if (hcd->core_if->dma_desc_enable) {
++			if (!hc->xfer_started
++			    || (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)) {
++				dwc_otg_hcd_start_xfer_ddma(hcd, hc->qh);
++				hc->qh->ping_state = 0;
++			}
++		} else if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			hc->qh->ping_state = 0;
++		}
++		retval = 0;
++	} else if (hc->halt_pending) {
++		/* Don't queue a request if the channel has been halted. */
++		retval = 0;
++	} else if (hc->halt_on_queue) {
++		dwc_otg_hc_halt(hcd->core_if, hc, hc->halt_status);
++		retval = 0;
++	} else if (hc->do_ping) {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++		}
++		retval = 0;
++	} else if (!hc->ep_is_in || hc->data_pid_start == DWC_OTG_HC_PID_SETUP) {
++		if ((fifo_dwords_avail * 4) >= hc->max_packet) {
++			if (!hc->xfer_started) {
++				dwc_otg_hc_start_transfer(hcd->core_if, hc);
++				retval = 1;
++			} else {
++				retval =
++				    dwc_otg_hc_continue_transfer(hcd->core_if,
++								 hc);
++			}
++		} else {
++			retval = -1;
++		}
++	} else {
++		if (!hc->xfer_started) {
++			dwc_otg_hc_start_transfer(hcd->core_if, hc);
++			retval = 1;
++		} else {
++			retval = dwc_otg_hc_continue_transfer(hcd->core_if, hc);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Processes periodic channels for the next frame and queues transactions for
++ * these channels to the DWC_otg controller. After queueing transactions, the
++ * Periodic Tx FIFO Empty interrupt is enabled if there are more transactions
++ * to queue as Periodic Tx FIFO or request queue space becomes available.
++ * Otherwise, the Periodic Tx FIFO Empty interrupt is disabled.
++ */
++static void process_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	hptxsts_data_t tx_status;
++	dwc_list_link_t *qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++
++	dwc_otg_host_global_regs_t *host_regs;
++	host_regs = hcd->core_if->host_if->host_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  P Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.ptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  P Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.ptxfspcavail);
++#endif
++
++	qh_ptr = hcd->periodic_sched_assigned.next;
++	while (qh_ptr != &hcd->periodic_sched_assigned) {
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		if (tx_status.b.ptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(qh_ptr, dwc_otg_qh_t, qh_list_entry);
++
++		/*
++		 * Set a flag if we're queuing high-bandwidth in slave mode.
++		 * The flag prevents any halts to get into the request queue in
++		 * the middle of multiple high-bandwidth packets getting queued.
++		 */
++		if (!hcd->core_if->dma_enable && qh->channel->multi_count > 1) {
++			hcd->core_if->queuing_high_bandwidth = 1;
++		}
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.ptxfspcavail);
++		if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/*
++		 * In Slave mode, stay on the current transfer until there is
++		 * nothing more to do or the high-bandwidth request count is
++		 * reached. In DMA mode, only need to queue one request. The
++		 * controller automatically handles multiple packets for
++		 * high-bandwidth transfers.
++		 */
++		if (hcd->core_if->dma_enable || status == 0 ||
++		    qh->channel->requests == qh->channel->multi_count) {
++			qh_ptr = qh_ptr->next;
++			/*
++			 * Move the QH from the periodic assigned schedule to
++			 * the periodic queued schedule.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_queued,
++					   &qh->qh_list_entry);
++
++			/* done queuing high bandwidth */
++			hcd->core_if->queuing_high_bandwidth = 0;
++		}
++	}
++
++	if (!hcd->core_if->dma_enable) {
++		dwc_otg_core_global_regs_t *global_regs;
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++
++		global_regs = hcd->core_if->core_global_regs;
++		intr_mask.b.ptxfempty = 1;
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&host_regs->hptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.ptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  P Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.ptxfspcavail);
++#endif
++		if (!DWC_LIST_EMPTY(&hcd->periodic_sched_assigned) ||
++		    no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the periodic Tx
++			 * FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * Processes active non-periodic channels and queues transactions for these
++ * channels to the DWC_otg controller. After queueing transactions, the NP Tx
++ * FIFO Empty interrupt is enabled if there are more transactions to queue as
++ * NP Tx FIFO or request queue space becomes available. Otherwise, the NP Tx
++ * FIFO Empty interrupt is disabled.
++ */
++static void process_non_periodic_channels(dwc_otg_hcd_t * hcd)
++{
++	gnptxsts_data_t tx_status;
++	dwc_list_link_t *orig_qh_ptr;
++	dwc_otg_qh_t *qh;
++	int status;
++	int no_queue_space = 0;
++	int no_fifo_space = 0;
++	int more_to_do = 0;
++
++	dwc_otg_core_global_regs_t *global_regs =
++	    hcd->core_if->core_global_regs;
++
++	DWC_DEBUGPL(DBG_HCDV, "Queue non-periodic transactions\n");
++#ifdef DEBUG
++	tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  NP Tx Req Queue Space Avail (before queue): %d\n",
++		    tx_status.b.nptxqspcavail);
++	DWC_DEBUGPL(DBG_HCDV, "  NP Tx FIFO Space Avail (before queue): %d\n",
++		    tx_status.b.nptxfspcavail);
++#endif
++	/*
++	 * Keep track of the starting point. Skip over the start-of-list
++	 * entry.
++	 */
++	if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++	}
++	orig_qh_ptr = hcd->non_periodic_qh_ptr;
++
++	/*
++	 * Process once through the active list or until no more space is
++	 * available in the request queue or the Tx FIFO.
++	 */
++	do {
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		if (!hcd->core_if->dma_enable && tx_status.b.nptxqspcavail == 0) {
++			no_queue_space = 1;
++			break;
++		}
++
++		qh = DWC_LIST_ENTRY(hcd->non_periodic_qh_ptr, dwc_otg_qh_t,
++				    qh_list_entry);
++		status =
++		    queue_transaction(hcd, qh->channel,
++				      tx_status.b.nptxfspcavail);
++
++		if (status > 0) {
++			more_to_do = 1;
++		} else if (status < 0) {
++			no_fifo_space = 1;
++			break;
++		}
++
++		/* Advance to next QH, skipping start-of-list entry. */
++		hcd->non_periodic_qh_ptr = hcd->non_periodic_qh_ptr->next;
++		if (hcd->non_periodic_qh_ptr == &hcd->non_periodic_sched_active) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++
++	} while (hcd->non_periodic_qh_ptr != orig_qh_ptr);
++
++	if (!hcd->core_if->dma_enable) {
++		gintmsk_data_t intr_mask = {.d32 = 0 };
++		intr_mask.b.nptxfempty = 1;
++
++#ifdef DEBUG
++		tx_status.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx Req Queue Space Avail (after queue): %d\n",
++			    tx_status.b.nptxqspcavail);
++		DWC_DEBUGPL(DBG_HCDV,
++			    "  NP Tx FIFO Space Avail (after queue): %d\n",
++			    tx_status.b.nptxfspcavail);
++#endif
++		if (more_to_do || no_queue_space || no_fifo_space) {
++			/*
++			 * May need to queue more transactions as the request
++			 * queue or Tx FIFO empties. Enable the non-periodic
++			 * Tx FIFO empty interrupt. (Always use the half-empty
++			 * level to ensure that new requests are loaded as
++			 * soon as possible.)
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0,
++					 intr_mask.d32);
++		} else {
++			/*
++			 * Disable the Tx FIFO empty interrupt since there are
++			 * no more transactions that need to be queued right
++			 * now. This function is called from interrupt
++			 * handlers to queue more transactions as transfer
++			 * states change.
++			 */
++			DWC_MODIFY_REG32(&global_regs->gintmsk, intr_mask.d32,
++					 0);
++		}
++	}
++}
++
++/**
++ * This function processes the currently active host channels and queues
++ * transactions for these channels to the DWC_otg controller. It is called
++ * from HCD interrupt handler functions.
++ *
++ * @param hcd The HCD state structure.
++ * @param tr_type The type(s) of transactions to queue (non-periodic,
++ * periodic, or both).
++ */
++void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++				    dwc_otg_transaction_type_e tr_type)
++{
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "Queue Transactions\n");
++#endif
++	/* Process host channels associated with periodic transfers. */
++	if ((tr_type == DWC_OTG_TRANSACTION_PERIODIC ||
++	     tr_type == DWC_OTG_TRANSACTION_ALL) &&
++	    !DWC_LIST_EMPTY(&hcd->periodic_sched_assigned)) {
++
++		process_periodic_channels(hcd);
++	}
++
++	/* Process host channels associated with non-periodic transfers. */
++	if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC ||
++	    tr_type == DWC_OTG_TRANSACTION_ALL) {
++		if (!DWC_LIST_EMPTY(&hcd->non_periodic_sched_active)) {
++			process_non_periodic_channels(hcd);
++		} else {
++			/*
++			 * Ensure NP Tx FIFO empty interrupt is disabled when
++			 * there are no non-periodic transfers to process.
++			 */
++			gintmsk_data_t gintmsk = {.d32 = 0 };
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->
++					 core_global_regs->gintmsk, gintmsk.d32,
++					 0);
++		}
++	}
++}
++
++#ifdef DWC_HS_ELECT_TST
++/*
++ * Quick and dirty hack to implement the HS Electrical Test
++ * SINGLE_STEP_GET_DEVICE_DESCRIPTOR feature.
++ *
++ * This code was copied from our userspace app "hset". It sends a
++ * Get Device Descriptor control sequence in two parts, first the
++ * Setup packet by itself, followed some time later by the In and
++ * Ack packets. Rather than trying to figure out how to add this
++ * functionality to the normal driver code, we just hijack the
++ * hardware, using these two function to drive the hardware
++ * directly.
++ */
++
++static dwc_otg_core_global_regs_t *global_regs;
++static dwc_otg_host_global_regs_t *hc_global_regs;
++static dwc_otg_hc_regs_t *hc_regs;
++static uint32_t *data_fifo;
++
++static void do_setup(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Send Setup packet (Get Device Descriptor)
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++//              hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_SETUP;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	/* Fill FIFO with Setup data for Get Device Descriptor */
++	data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++	DWC_WRITE_REG32(data_fifo++, 0x01000680);
++	DWC_WRITE_REG32(data_fifo++, 0x00080000);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++
++static void do_in_ack(void)
++{
++	gintsts_data_t gintsts;
++	hctsiz_data_t hctsiz;
++	hcchar_data_t hcchar;
++	haint_data_t haint;
++	hcint_data_t hcint;
++	host_grxsts_data_t grxsts;
++
++	/* Enable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0001);
++
++	/* Enable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x04a3);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/*
++	 * Receive Control In packet
++	 */
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 8;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 1;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer */
++		if (grxsts.b.bcnt > 0) {
++			int i;
++			int word_count = (grxsts.b.bcnt + 3) / 4;
++
++			data_fifo = (uint32_t *) ((char *)global_regs + 0x1000);
++
++			for (i = 0; i < word_count; i++) {
++				(void)DWC_READ_REG32(data_fifo++);
++			}
++		}
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for receive status queue interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.rxstsqlvl == 0);
++
++	/* Read RXSTS */
++	grxsts.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	/* Clear RXSTSQLVL in GINTSTS */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++		break;
++
++	default:
++		break;
++	}
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++//      usleep(100000);
++//      mdelay(100);
++	dwc_mdelay(1);
++
++	/*
++	 * Send handshake packet
++	 */
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Make sure channel is disabled */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chen) {
++		hcchar.b.chdis = 1;
++		hcchar.b.chen = 1;
++		DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++		//sleep(1);
++		dwc_mdelay(1000);
++
++		/* Read GINTSTS */
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++		/* Read HAINT */
++		haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++		/* Read HCINT */
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++		/* Read HCCHAR */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++		/* Clear HCINT */
++		DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++		/* Clear HAINT */
++		DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++		/* Clear GINTSTS */
++		DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	}
++
++	/* Set HCTSIZ */
++	hctsiz.d32 = 0;
++	hctsiz.b.xfersize = 0;
++	hctsiz.b.pktcnt = 1;
++	hctsiz.b.pid = DWC_OTG_HC_PID_DATA1;
++	DWC_WRITE_REG32(&hc_regs->hctsiz, hctsiz.d32);
++
++	/* Set HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.epdir = 0;
++	hcchar.b.epnum = 0;
++	hcchar.b.mps = 8;
++	hcchar.b.chen = 1;
++	DWC_WRITE_REG32(&hc_regs->hcchar, hcchar.d32);
++
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++
++	/* Wait for host channel interrupt */
++	do {
++		gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++	} while (gintsts.b.hcintr == 0);
++
++	/* Disable HCINTs */
++	DWC_WRITE_REG32(&hc_regs->hcintmsk, 0x0000);
++
++	/* Disable HAINTs */
++	DWC_WRITE_REG32(&hc_global_regs->haintmsk, 0x0000);
++
++	/* Read HAINT */
++	haint.d32 = DWC_READ_REG32(&hc_global_regs->haint);
++
++	/* Read HCINT */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++
++	/* Read HCCHAR */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++
++	/* Clear HCINT */
++	DWC_WRITE_REG32(&hc_regs->hcint, hcint.d32);
++
++	/* Clear HAINT */
++	DWC_WRITE_REG32(&hc_global_regs->haint, haint.d32);
++
++	/* Clear GINTSTS */
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	/* Read GINTSTS */
++	gintsts.d32 = DWC_READ_REG32(&global_regs->gintsts);
++}
++#endif
++
++/** Handles hub class-specific requests. */
++int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++			    uint16_t typeReq,
++			    uint16_t wValue,
++			    uint16_t wIndex, uint8_t * buf, uint16_t wLength)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	usb_hub_descriptor_t *hub_desc;
++	hprt0_data_t hprt0 = {.d32 = 0 };
++
++	uint32_t port_status;
++
++	switch (typeReq) {
++	case UCR_CLEAR_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "ClearHubFeature 0x%x\n", wValue);
++		switch (wValue) {
++		case UHF_C_HUB_LOCAL_POWER:
++		case UHF_C_HUB_OVER_CURRENT:
++			/* Nothing required here */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearHubFeature request %xh unknown\n",
++				  wValue);
++		}
++		break;
++	case UCR_CLEAR_PORT_FEATURE:
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (wValue != UHF_PORT_L1)
++#endif
++			if (!wIndex || wIndex > 1)
++				goto error;
++
++		switch (wValue) {
++		case UHF_PORT_ENABLE:
++			DWC_DEBUGPL(DBG_ANY, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_ENABLE\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtena = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_SUSPEND\n");
++
++			if (core_if->power_down == 2) {
++				dwc_otg_host_hibernation_restore(core_if, 0, 0);
++			} else {
++				DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				hprt0.b.prtsusp = 0;
++				/* Clear Resume bit */
++				dwc_mdelay(100);
++				hprt0.b.prtres = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			}
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_PORT_L1:
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				glpmcfg_data_t lpmcfg = {.d32 = 0 };
++
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->
++						   core_global_regs->glpmcfg);
++				lpmcfg.b.en_utmi_sleep = 0;
++				lpmcfg.b.hird_thres &= (~(1 << 4));
++				lpmcfg.b.prt_sleep_sts = 1;
++				DWC_WRITE_REG32(&core_if->
++						core_global_regs->glpmcfg,
++						lpmcfg.d32);
++
++				/* Clear Enbl_L1Gating bit. */
++				pcgcctl.b.enbl_sleep_gating = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32,
++						 0);
++
++				dwc_mdelay(5);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtres = 1;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++				/* This bit will be cleared in wakeup interrupt handle */
++				break;
++			}
++#endif
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 0;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_INDICATOR\n");
++			/* Port inidicator not supported */
++			break;
++		case UHF_C_PORT_CONNECTION:
++			/* Clears drivers internal connect status change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_CONNECTION\n");
++			dwc_otg_hcd->flags.b.port_connect_status_change = 0;
++			break;
++		case UHF_C_PORT_RESET:
++			/* Clears the driver's internal Port Reset Change
++			 * flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_RESET\n");
++			dwc_otg_hcd->flags.b.port_reset_change = 0;
++			break;
++		case UHF_C_PORT_ENABLE:
++			/* Clears the driver's internal Port
++			 * Enable/Disable Change flag */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_ENABLE\n");
++			dwc_otg_hcd->flags.b.port_enable_change = 0;
++			break;
++		case UHF_C_PORT_SUSPEND:
++			/* Clears the driver's internal Port Suspend
++			 * Change flag, which is set when resume signaling on
++			 * the host port is complete */
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_SUSPEND\n");
++			dwc_otg_hcd->flags.b.port_suspend_change = 0;
++			break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		case UHF_C_PORT_L1:
++			dwc_otg_hcd->flags.b.port_l1_change = 0;
++			break;
++#endif
++		case UHF_C_PORT_OVER_CURRENT:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "ClearPortFeature USB_PORT_FEAT_C_OVER_CURRENT\n");
++			dwc_otg_hcd->flags.b.port_over_current_change = 0;
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "ClearPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++		}
++		break;
++	case UCR_GET_HUB_DESCRIPTOR:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubDescriptor\n");
++		hub_desc = (usb_hub_descriptor_t *) buf;
++		hub_desc->bDescLength = 9;
++		hub_desc->bDescriptorType = 0x29;
++		hub_desc->bNbrPorts = 1;
++		USETW(hub_desc->wHubCharacteristics, 0x08);
++		hub_desc->bPwrOn2PwrGood = 1;
++		hub_desc->bHubContrCurrent = 0;
++		hub_desc->DeviceRemovable[0] = 0;
++		hub_desc->DeviceRemovable[1] = 0xff;
++		break;
++	case UCR_GET_HUB_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetHubStatus\n");
++		DWC_MEMSET(buf, 0, 4);
++		break;
++	case UCR_GET_PORT_STATUS:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "GetPortStatus wIndex = 0x%04x FLAGS=0x%08x\n",
++			    wIndex, dwc_otg_hcd->flags.d32);
++		if (!wIndex || wIndex > 1)
++			goto error;
++
++		port_status = 0;
++
++		if (dwc_otg_hcd->flags.b.port_connect_status_change)
++			port_status |= (1 << UHF_C_PORT_CONNECTION);
++
++		if (dwc_otg_hcd->flags.b.port_enable_change)
++			port_status |= (1 << UHF_C_PORT_ENABLE);
++
++		if (dwc_otg_hcd->flags.b.port_suspend_change)
++			port_status |= (1 << UHF_C_PORT_SUSPEND);
++
++		if (dwc_otg_hcd->flags.b.port_l1_change)
++			port_status |= (1 << UHF_C_PORT_L1);
++
++		if (dwc_otg_hcd->flags.b.port_reset_change) {
++			port_status |= (1 << UHF_C_PORT_RESET);
++		}
++
++		if (dwc_otg_hcd->flags.b.port_over_current_change) {
++			DWC_WARN("Overcurrent change detected\n");
++			port_status |= (1 << UHF_C_PORT_OVER_CURRENT);
++		}
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return 0's for the remainder of the port status
++			 * since the port register can't be read if the core
++			 * is in device mode.
++			 */
++			*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++			break;
++		}
++
++		hprt0.d32 = DWC_READ_REG32(core_if->host_if->hprt0);
++		DWC_DEBUGPL(DBG_HCDV, "  HPRT0: 0x%08x\n", hprt0.d32);
++
++		if (hprt0.b.prtconnsts)
++			port_status |= (1 << UHF_PORT_CONNECTION);
++
++		if (hprt0.b.prtena)
++			port_status |= (1 << UHF_PORT_ENABLE);
++
++		if (hprt0.b.prtsusp)
++			port_status |= (1 << UHF_PORT_SUSPEND);
++
++		if (hprt0.b.prtovrcurract)
++			port_status |= (1 << UHF_PORT_OVER_CURRENT);
++
++		if (hprt0.b.prtrst)
++			port_status |= (1 << UHF_PORT_RESET);
++
++		if (hprt0.b.prtpwr)
++			port_status |= (1 << UHF_PORT_POWER);
++
++		if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED)
++			port_status |= (1 << UHF_PORT_HIGH_SPEED);
++		else if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED)
++			port_status |= (1 << UHF_PORT_LOW_SPEED);
++
++		if (hprt0.b.prttstctl)
++			port_status |= (1 << UHF_PORT_TEST);
++		if (dwc_otg_get_lpm_portsleepstatus(dwc_otg_hcd->core_if)) {
++			port_status |= (1 << UHF_PORT_L1);
++		}
++		/*
++		   For Synopsys HW emulation of Power down wkup_control asserts the
++		   hreset_n and prst_n on suspned. This causes the HPRT0 to be zero.
++		   We intentionally tell the software that port is in L2Suspend state.
++		   Only for STE.
++		*/
++		if ((core_if->power_down == 2)
++		    && (core_if->hibernation_suspend == 1)) {
++			port_status |= (1 << UHF_PORT_SUSPEND);
++		}
++		/* USB_PORT_FEAT_INDICATOR unsupported always 0 */
++
++		*((__le32 *) buf) = dwc_cpu_to_le32(&port_status);
++
++		break;
++	case UCR_SET_HUB_FEATURE:
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++			    "SetHubFeature\n");
++		/* No HUB features supported */
++		break;
++	case UCR_SET_PORT_FEATURE:
++		if (wValue != UHF_PORT_TEST && (!wIndex || wIndex > 1))
++			goto error;
++
++		if (!dwc_otg_hcd->flags.b.port_connect_status) {
++			/*
++			 * The port is disconnected, which means the core is
++			 * either in device mode or it soon will be. Just
++			 * return without doing anything since the port
++			 * register can't be written if the core is in device
++			 * mode.
++			 */
++			break;
++		}
++
++		switch (wValue) {
++		case UHF_PORT_SUSPEND:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_SUSPEND\n");
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) != wIndex) {
++				goto error;
++			}
++			if (core_if->power_down == 2) {
++				int timeout = 300;
++				dwc_irqflags_t flags;
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn = {.d32 = 0 };
++				gusbcfg_data_t gusbcfg = {.d32 = 0 };
++#ifdef DWC_DEV_SRPCAP
++				int32_t otg_cap_param = core_if->core_params->otg_cap;
++#endif
++				DWC_PRINTF("Preparing for complete power-off\n");
++
++				/* Save registers before hibernation */
++				dwc_otg_save_global_regs(core_if);
++				dwc_otg_save_host_regs(core_if);
++
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtsusp = 1;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				/* Spin hprt0.b.prtsusp to became 1 */
++				do {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					if (hprt0.b.prtsusp) {
++						break;
++					}
++					dwc_mdelay(1);
++				} while (--timeout);
++				if (!timeout) {
++					DWC_WARN("Suspend wasn't genereted\n");
++				}
++				dwc_udelay(10);
++
++				/*
++				 * We need to disable interrupts to prevent servicing of any IRQ
++				 * during going to hibernation
++				 */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++#ifdef DWC_DEV_SRPCAP
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				hprt0.b.prtpwr = 0;
++				hprt0.b.prtena = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0,
++						hprt0.d32);
++#endif
++				gusbcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->
++						   gusbcfg);
++				if (gusbcfg.b.ulpi_utmi_sel == 1) {
++					/* ULPI interface */
++					/* Suspend the Phy Clock */
++					pcgcctl.d32 = 0;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++							 pcgcctl.d32);
++					dwc_udelay(10);
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++				} else {
++					/* UTMI+ Interface */
++					gpwrdn.b.pmuactv = 1;
++					DWC_MODIFY_REG32(&core_if->
++							 core_global_regs->
++							 gpwrdn, 0, gpwrdn.d32);
++					dwc_udelay(10);
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, 0, pcgcctl.d32);
++					dwc_udelay(10);
++				}
++#ifdef DWC_DEV_SRPCAP
++				gpwrdn.d32 = 0;
++				gpwrdn.b.dis_vbus = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++#endif
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuintsel = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				gpwrdn.d32 = 0;
++#ifdef DWC_DEV_SRPCAP
++				gpwrdn.b.srp_det_msk = 1;
++#endif
++				gpwrdn.b.disconn_det_msk = 1;
++				gpwrdn.b.lnstchng_msk = 1;
++				gpwrdn.b.sts_chngint_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Enable Power Down Clamp and all interrupts in GPWRDN */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnclmp = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++				dwc_udelay(10);
++
++				/* Switch off VDD */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++#ifdef DWC_DEV_SRPCAP
++				if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE)
++				{
++					core_if->pwron_timer_started = 1;
++					DWC_TIMER_SCHEDULE(core_if->pwron_timer, 6000 /* 6 secs */ );
++				}
++#endif
++				/* Save gpwrdn register for further usage if stschng interrupt */
++				core_if->gr_backup->gpwrdn_local =
++						DWC_READ_REG32(&core_if->core_global_regs->gpwrdn);
++
++				/* Set flag to indicate that we are in hibernation */
++				core_if->hibernation_suspend = 1;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock,flags);
++
++				DWC_PRINTF("Host hibernation completed\n");
++				// Exit from case statement
++				break;
++
++			}
++			if (dwc_otg_hcd_otg_port(dwc_otg_hcd) == wIndex &&
++			    dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gotgctl.b.hstsethnpen = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gotgctl, 0, gotgctl.d32);
++				core_if->op_state = A_SUSPEND;
++			}
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtsusp = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			{
++				dwc_irqflags_t flags;
++				/* Update lx_state */
++				DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++				core_if->lx_state = DWC_OTG_L2;
++				DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++			}
++			/* Suspend the Phy Clock */
++			{
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++				DWC_MODIFY_REG32(core_if->pcgcctl, 0,
++						 pcgcctl.d32);
++				dwc_udelay(10);
++			}
++
++			/* For HNP the bus must be suspended for at least 200ms. */
++			if (dwc_otg_hcd->fops->get_b_hnp_enable(dwc_otg_hcd)) {
++				pcgcctl_data_t pcgcctl = {.d32 = 0 };
++				pcgcctl.b.stoppclk = 1;
++                DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++				dwc_mdelay(200);
++			}
++
++			/** @todo - check how sw can wait for 1 sec to check asesvld??? */
++#if 0 //vahrama !!!!!!!!!!!!!!!!!!
++			if (core_if->adp_enable) {
++				gotgctl_data_t gotgctl = {.d32 = 0 };
++				gpwrdn_data_t gpwrdn;
++
++				while (gotgctl.b.asesvld == 1) {
++					gotgctl.d32 =
++					    DWC_READ_REG32(&core_if->
++							   core_global_regs->
++							   gotgctl);
++					dwc_mdelay(100);
++				}
++
++				/* Enable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				/* Unmask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->core_global_regs->
++						 gpwrdn, 0, gpwrdn.d32);
++
++				dwc_otg_adp_probe_start(core_if);
++			}
++#endif
++			break;
++		case UHF_PORT_POWER:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_POWER\n");
++			hprt0.d32 = dwc_otg_read_hprt0(core_if);
++			hprt0.b.prtpwr = 1;
++			DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++			break;
++		case UHF_PORT_RESET:
++			if ((core_if->power_down == 2)
++			    && (core_if->hibernation_suspend == 1)) {
++				/* If we are going to exit from Hibernated
++				 * state via USB RESET.
++				 */
++				dwc_otg_host_hibernation_restore(core_if, 0, 1);
++			} else {
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_RESET\n");
++				{
++					pcgcctl_data_t pcgcctl = {.d32 = 0 };
++					pcgcctl.b.enbl_sleep_gating = 1;
++					pcgcctl.b.stoppclk = 1;
++					DWC_MODIFY_REG32(core_if->pcgcctl, pcgcctl.d32, 0);
++					DWC_WRITE_REG32(core_if->pcgcctl, 0);
++				}
++#ifdef CONFIG_USB_DWC_OTG_LPM
++				{
++					glpmcfg_data_t lpmcfg;
++					lpmcfg.d32 =
++						DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++					if (lpmcfg.b.prt_sleep_sts) {
++						lpmcfg.b.en_utmi_sleep = 0;
++						lpmcfg.b.hird_thres &= (~(1 << 4));
++						DWC_WRITE_REG32
++						    (&core_if->core_global_regs->glpmcfg,
++						     lpmcfg.d32);
++						dwc_mdelay(1);
++					}
++				}
++#endif
++				hprt0.d32 = dwc_otg_read_hprt0(core_if);
++				/* Clear suspend bit if resetting from suspended state. */
++				hprt0.b.prtsusp = 0;
++				/* When B-Host the Port reset bit is set in
++				 * the Start HCD Callback function, so that
++				 * the reset is started within 1ms of the HNP
++				 * success interrupt. */
++				if (!dwc_otg_hcd_is_b_host(dwc_otg_hcd)) {
++					hprt0.b.prtpwr = 1;
++					hprt0.b.prtrst = 1;
++					DWC_PRINTF("Indeed it is in host mode hprt0 = %08x\n",hprt0.d32);
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				}
++				/* Clear reset bit in 10ms (FS/LS) or 50ms (HS) */
++				dwc_mdelay(60);
++				hprt0.b.prtrst = 0;
++				DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++				core_if->lx_state = DWC_OTG_L0;	/* Now back to the on state */
++			}
++			break;
++#ifdef DWC_HS_ELECT_TST
++		case UHF_PORT_TEST:
++			{
++				uint32_t t;
++				gintmsk_data_t gintmsk;
++
++				t = (wIndex >> 8);	/* MSB wIndex USB */
++				DWC_DEBUGPL(DBG_HCD,
++					    "DWC OTG HCD HUB CONTROL - "
++					    "SetPortFeature - USB_PORT_FEAT_TEST %d\n",
++					    t);
++				DWC_WARN("USB_PORT_FEAT_TEST %d\n", t);
++				if (t < 6) {
++					hprt0.d32 = dwc_otg_read_hprt0(core_if);
++					hprt0.b.prttstctl = t;
++					DWC_WRITE_REG32(core_if->host_if->hprt0,
++							hprt0.d32);
++				} else {
++					/* Setup global vars with reg addresses (quick and
++					 * dirty hack, should be cleaned up)
++					 */
++					global_regs = core_if->core_global_regs;
++					hc_global_regs =
++					    core_if->host_if->host_global_regs;
++					hc_regs =
++					    (dwc_otg_hc_regs_t *) ((char *)
++								   global_regs +
++								   0x500);
++					data_fifo =
++					    (uint32_t *) ((char *)global_regs +
++							  0x1000);
++
++					if (t == 6) {	/* HS_HOST_PORT_SUSPEND_RESUME */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive suspend on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 1;
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Drive resume on the root port */
++						hprt0.d32 =
++						    dwc_otg_read_hprt0(core_if);
++						hprt0.b.prtsusp = 0;
++						hprt0.b.prtres = 1;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++						dwc_mdelay(100);
++
++						/* Clear the resume bit */
++						hprt0.b.prtres = 0;
++						DWC_WRITE_REG32(core_if->host_if->hprt0, hprt0.d32);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 7) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR setup */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* 15 second delay per the test spec */
++						dwc_mdelay(15000);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					} else if (t == 8) {	/* SINGLE_STEP_GET_DEVICE_DESCRIPTOR execute */
++						/* Save current interrupt mask */
++						gintmsk.d32 =
++						    DWC_READ_REG32
++						    (&global_regs->gintmsk);
++
++						/* Disable all interrupts while we muck with
++						 * the hardware directly
++						 */
++						DWC_WRITE_REG32(&global_regs->gintmsk, 0);
++
++						/* Send the Setup packet */
++						do_setup();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Send the In and Ack packets */
++						do_in_ack();
++
++						/* 15 second delay so nothing else happens for awhile */
++						dwc_mdelay(15000);
++
++						/* Restore interrupts */
++						DWC_WRITE_REG32(&global_regs->gintmsk, gintmsk.d32);
++					}
++				}
++				break;
++			}
++#endif /* DWC_HS_ELECT_TST */
++
++		case UHF_PORT_INDICATOR:
++			DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB CONTROL - "
++				    "SetPortFeature - USB_PORT_FEAT_INDICATOR\n");
++			/* Not supported */
++			break;
++		default:
++			retval = -DWC_E_INVALID;
++			DWC_ERROR("DWC OTG HCD - "
++				  "SetPortFeature request %xh "
++				  "unknown or unsupported\n", wValue);
++			break;
++		}
++		break;
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	case UCR_SET_AND_TEST_PORT_FEATURE:
++		if (wValue != UHF_PORT_L1) {
++			goto error;
++		}
++		{
++			int portnum, hird, devaddr, remwake;
++			glpmcfg_data_t lpmcfg;
++			uint32_t time_usecs;
++			gintsts_data_t gintsts;
++			gintmsk_data_t gintmsk;
++
++			if (!dwc_otg_get_param_lpm_enable(core_if)) {
++				goto error;
++			}
++			if (wValue != UHF_PORT_L1 || wLength != 1) {
++				goto error;
++			}
++			/* Check if the port currently is in SLEEP state */
++			lpmcfg.d32 =
++			    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++			if (lpmcfg.b.prt_sleep_sts) {
++				DWC_INFO("Port is already in sleep mode\n");
++				buf[0] = 0;	/* Return success */
++				break;
++			}
++
++			portnum = wIndex & 0xf;
++			hird = (wIndex >> 4) & 0xf;
++			devaddr = (wIndex >> 8) & 0x7f;
++			remwake = (wIndex >> 15);
++
++			if (portnum != 1) {
++				retval = -DWC_E_INVALID;
++				DWC_WARN
++				    ("Wrong port number(%d) in SetandTestPortFeature request\n",
++				     portnum);
++				break;
++			}
++
++			DWC_PRINTF
++			    ("SetandTestPortFeature request: portnum = %d, hird = %d, devaddr = %d, rewake = %d\n",
++			     portnum, hird, devaddr, remwake);
++			/* Disable LPM interrupt */
++			gintmsk.d32 = 0;
++			gintmsk.b.lpmtranrcvd = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++					 gintmsk.d32, 0);
++
++			if (dwc_otg_hcd_send_lpm
++			    (dwc_otg_hcd, devaddr, hird, remwake)) {
++				retval = -DWC_E_INVALID;
++				break;
++			}
++
++			time_usecs = 10 * (lpmcfg.b.retry_count + 1);
++			/* We will consider timeout if time_usecs microseconds pass,
++			 * and we don't receive LPM transaction status.
++			 * After receiving non-error responce(ACK/NYET/STALL) from device,
++			 *  core will set lpmtranrcvd bit.
++			 */
++			do {
++				gintsts.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++				if (gintsts.b.lpmtranrcvd) {
++					break;
++				}
++				dwc_udelay(1);
++			} while (--time_usecs);
++			/* lpm_int bit will be cleared in LPM interrupt handler */
++
++			/* Now fill status
++			 * 0x00 - Success
++			 * 0x10 - NYET
++			 * 0x11 - Timeout
++			 */
++			if (!gintsts.b.lpmtranrcvd) {
++				buf[0] = 0x3;	/* Completion code is Timeout */
++				dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd);
++			} else {
++				lpmcfg.d32 =
++				    DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++				if (lpmcfg.b.lpm_resp == 0x3) {
++					/* ACK responce from the device */
++					buf[0] = 0x00;	/* Success */
++				} else if (lpmcfg.b.lpm_resp == 0x2) {
++					/* NYET responce from the device */
++					buf[0] = 0x2;
++				} else {
++					/* Otherwise responce with Timeout */
++					buf[0] = 0x3;
++				}
++			}
++			DWC_PRINTF("Device responce to LPM trans is %x\n",
++				   lpmcfg.b.lpm_resp);
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0,
++					 gintmsk.d32);
++
++			break;
++		}
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++	default:
++error:
++		retval = -DWC_E_INVALID;
++		DWC_WARN("DWC OTG HCD - "
++			 "Unknown hub control request type or invalid typeReq: %xh wIndex: %xh wValue: %xh\n",
++			 typeReq, wIndex, wValue);
++		break;
++	}
++
++	return retval;
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/** Returns index of host channel to perform LPM transaction. */
++int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd, uint8_t devaddr)
++{
++	dwc_otg_core_if_t *core_if = hcd->core_if;
++	dwc_hc_t *hc;
++	hcchar_data_t hcchar;
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++	if (DWC_CIRCLEQ_EMPTY(&hcd->free_hc_list)) {
++		DWC_PRINTF("No free channel to select for LPM transaction\n");
++		return -1;
++	}
++
++	hc = DWC_CIRCLEQ_FIRST(&hcd->free_hc_list);
++
++	/* Mask host channel interrupts. */
++	gintmsk.b.hcintr = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, gintmsk.d32, 0);
++
++	/* Fill fields that core needs for LPM transaction */
++	hcchar.b.devaddr = devaddr;
++	hcchar.b.epnum = 0;
++	hcchar.b.eptype = DWC_OTG_EP_TYPE_CONTROL;
++	hcchar.b.mps = 64;
++	hcchar.b.lspddev = (hc->speed == DWC_OTG_EP_SPEED_LOW);
++	hcchar.b.epdir = 0;	/* OUT */
++	DWC_WRITE_REG32(&core_if->host_if->hc_regs[hc->hc_num]->hcchar,
++			hcchar.d32);
++
++	/* Remove the host channel from the free list. */
++	DWC_CIRCLEQ_REMOVE_INIT(&hcd->free_hc_list, hc, hc_list_entry);
++
++	DWC_PRINTF("hcnum = %d devaddr = %d\n", hc->hc_num, devaddr);
++
++	return hc->hc_num;
++}
++
++/** Release hc after performing LPM transaction */
++void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd)
++{
++	dwc_hc_t *hc;
++	glpmcfg_data_t lpmcfg;
++	uint8_t hc_num;
++
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++	hc_num = lpmcfg.b.lpm_chan_index;
++
++	hc = hcd->hc_ptr_array[hc_num];
++
++	DWC_PRINTF("Freeing channel %d after LPM\n", hc_num);
++	/* Return host channel to free list */
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++}
++
++int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr, uint8_t hird,
++			 uint8_t bRemoteWake)
++{
++	glpmcfg_data_t lpmcfg;
++	pcgcctl_data_t pcgcctl = {.d32 = 0 };
++	int channel;
++
++	channel = dwc_otg_hcd_get_hc_for_lpm_tran(hcd, devaddr);
++	if (channel < 0) {
++		return channel;
++	}
++
++	pcgcctl.b.enbl_sleep_gating = 1;
++	DWC_MODIFY_REG32(hcd->core_if->pcgcctl, 0, pcgcctl.d32);
++
++	/* Read LPM config register */
++	lpmcfg.d32 = DWC_READ_REG32(&hcd->core_if->core_global_regs->glpmcfg);
++
++	/* Program LPM transaction fields */
++	lpmcfg.b.rem_wkup_en = bRemoteWake;
++	lpmcfg.b.hird = hird;
++	lpmcfg.b.hird_thres = 0x1c;
++	lpmcfg.b.lpm_chan_index = channel;
++	lpmcfg.b.en_utmi_sleep = 1;
++	/* Program LPM config register */
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	/* Send LPM transaction */
++	lpmcfg.b.send_lpm = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	return 0;
++}
++
++#endif /* CONFIG_USB_DWC_OTG_LPM */
++
++int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port)
++{
++	int retval;
++
++	if (port != 1) {
++		return -DWC_E_INVALID;
++	}
++
++	retval = (hcd->flags.b.port_connect_status_change ||
++		  hcd->flags.b.port_reset_change ||
++		  hcd->flags.b.port_enable_change ||
++		  hcd->flags.b.port_suspend_change ||
++		  hcd->flags.b.port_over_current_change);
++#ifdef DEBUG
++	if (retval) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD HUB STATUS DATA:"
++			    " Root port status changed\n");
++		DWC_DEBUGPL(DBG_HCDV, "  port_connect_status_change: %d\n",
++			    hcd->flags.b.port_connect_status_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_reset_change: %d\n",
++			    hcd->flags.b.port_reset_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_enable_change: %d\n",
++			    hcd->flags.b.port_enable_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_suspend_change: %d\n",
++			    hcd->flags.b.port_suspend_change);
++		DWC_DEBUGPL(DBG_HCDV, "  port_over_current_change: %d\n",
++			    hcd->flags.b.port_over_current_change);
++	}
++#endif
++	return retval;
++}
++
++int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	hfnum_data_t hfnum;
++	hfnum.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->host_if->host_global_regs->
++			   hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD GET FRAME NUMBER %d\n",
++		    hfnum.b.frnum);
++#endif
++	return hfnum.b.frnum;
++}
++
++int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++		      struct dwc_otg_hcd_function_ops *fops)
++{
++	int retval = 0;
++
++	hcd->fops = fops;
++	if (!dwc_otg_is_device_mode(hcd->core_if) &&
++		(!hcd->core_if->adp_enable || hcd->core_if->adp.adp_started)) {
++		dwc_otg_hcd_reinit(hcd);
++	} else {
++		retval = -DWC_E_NO_DEVICE;
++	}
++
++	return retval;
++}
++
++void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd)
++{
++	return hcd->priv;
++}
++
++void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data)
++{
++	hcd->priv = priv_data;
++}
++
++uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd)
++{
++	return hcd->otg_port;
++}
++
++uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd)
++{
++	uint32_t is_b_host;
++	if (hcd->core_if->op_state == B_HOST) {
++		is_b_host = 1;
++	} else {
++		is_b_host = 0;
++	}
++
++	return is_b_host;
++}
++
++dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++					 int iso_desc_count, int atomic_alloc)
++{
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	uint32_t size;
++
++	size =
++	    sizeof(*dwc_otg_urb) +
++	    iso_desc_count * sizeof(struct dwc_otg_hcd_iso_packet_desc);
++	if (atomic_alloc)
++		dwc_otg_urb = DWC_ALLOC_ATOMIC(size);
++	else
++		dwc_otg_urb = DWC_ALLOC(size);
++
++        if (NULL != dwc_otg_urb)
++                dwc_otg_urb->packet_count = iso_desc_count;
++        else {
++                dwc_otg_urb->packet_count = 0;
++                if (size != 0) {
++                        DWC_ERROR("**** DWC OTG HCD URB alloc - "
++                                  "%salloc of %db failed\n",
++                                  atomic_alloc?"atomic ":"", size);
++                }
++        }
++
++	return dwc_otg_urb;
++}
++
++void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				  uint8_t dev_addr, uint8_t ep_num,
++				  uint8_t ep_type, uint8_t ep_dir, uint16_t mps)
++{
++	dwc_otg_hcd_fill_pipe(&dwc_otg_urb->pipe_info, dev_addr, ep_num,
++			      ep_type, ep_dir, mps);
++#if 0
++	DWC_PRINTF
++	    ("addr = %d, ep_num = %d, ep_dir = 0x%x, ep_type = 0x%x, mps = %d\n",
++	     dev_addr, ep_num, ep_dir, ep_type, mps);
++#endif
++}
++
++void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++				void *urb_handle, void *buf, dwc_dma_t dma,
++				uint32_t buflen, void *setup_packet,
++				dwc_dma_t setup_dma, uint32_t flags,
++				uint16_t interval)
++{
++	dwc_otg_urb->priv = urb_handle;
++	dwc_otg_urb->buf = buf;
++	dwc_otg_urb->dma = dma;
++	dwc_otg_urb->length = buflen;
++	dwc_otg_urb->setup_packet = setup_packet;
++	dwc_otg_urb->setup_dma = setup_dma;
++	dwc_otg_urb->flags = flags;
++	dwc_otg_urb->interval = interval;
++	dwc_otg_urb->status = -DWC_E_IN_PROGRESS;
++}
++
++uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->actual_length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t * dwc_otg_urb)
++{
++	return dwc_otg_urb->error_count;
++}
++
++void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					 int desc_num, uint32_t offset,
++					 uint32_t length)
++{
++	dwc_otg_urb->iso_descs[desc_num].offset = offset;
++	dwc_otg_urb->iso_descs[desc_num].length = length;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t * dwc_otg_urb,
++					     int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].status;
++}
++
++uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num)
++{
++	return dwc_otg_urb->iso_descs[desc_num].actual_length;
++}
++
++int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	int allocated = 0;
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++
++	if (qh) {
++		if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++			allocated = 1;
++		}
++	}
++	return allocated;
++}
++
++int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	int freed = 0;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		freed = 1;
++	}
++
++	return freed;
++}
++
++uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd, void *ep_handle)
++{
++	dwc_otg_qh_t *qh = (dwc_otg_qh_t *) ep_handle;
++	DWC_ASSERT(qh, "qh is not allocated\n");
++	return qh->usecs;
++}
++
++void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd)
++{
++#ifdef DEBUG
++	int num_channels;
++	int i;
++	gnptxsts_data_t np_tx_status;
++	hptxsts_data_t p_tx_status;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	DWC_PRINTF("\n");
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("HCD State:\n");
++	DWC_PRINTF("  Num channels: %d\n", num_channels);
++	for (i = 0; i < num_channels; i++) {
++		dwc_hc_t *hc = hcd->hc_ptr_array[i];
++		DWC_PRINTF("  Channel %d:\n", i);
++		DWC_PRINTF("    dev_addr: %d, ep_num: %d, ep_is_in: %d\n",
++			   hc->dev_addr, hc->ep_num, hc->ep_is_in);
++		DWC_PRINTF("    speed: %d\n", hc->speed);
++		DWC_PRINTF("    ep_type: %d\n", hc->ep_type);
++		DWC_PRINTF("    max_packet: %d\n", hc->max_packet);
++		DWC_PRINTF("    data_pid_start: %d\n", hc->data_pid_start);
++		DWC_PRINTF("    multi_count: %d\n", hc->multi_count);
++		DWC_PRINTF("    xfer_started: %d\n", hc->xfer_started);
++		DWC_PRINTF("    xfer_buff: %p\n", hc->xfer_buff);
++		DWC_PRINTF("    xfer_len: %d\n", hc->xfer_len);
++		DWC_PRINTF("    xfer_count: %d\n", hc->xfer_count);
++		DWC_PRINTF("    halt_on_queue: %d\n", hc->halt_on_queue);
++		DWC_PRINTF("    halt_pending: %d\n", hc->halt_pending);
++		DWC_PRINTF("    halt_status: %d\n", hc->halt_status);
++		DWC_PRINTF("    do_split: %d\n", hc->do_split);
++		DWC_PRINTF("    complete_split: %d\n", hc->complete_split);
++		DWC_PRINTF("    hub_addr: %d\n", hc->hub_addr);
++		DWC_PRINTF("    port_addr: %d\n", hc->port_addr);
++		DWC_PRINTF("    xact_pos: %d\n", hc->xact_pos);
++		DWC_PRINTF("    requests: %d\n", hc->requests);
++		DWC_PRINTF("    qh: %p\n", hc->qh);
++		if (hc->xfer_started) {
++			hfnum_data_t hfnum;
++			hcchar_data_t hcchar;
++			hctsiz_data_t hctsiz;
++			hcint_data_t hcint;
++			hcintmsk_data_t hcintmsk;
++			hfnum.d32 =
++			    DWC_READ_REG32(&hcd->core_if->
++					   host_if->host_global_regs->hfnum);
++			hcchar.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcchar);
++			hctsiz.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hctsiz);
++			hcint.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcint);
++			hcintmsk.d32 =
++			    DWC_READ_REG32(&hcd->core_if->host_if->
++					   hc_regs[i]->hcintmsk);
++			DWC_PRINTF("    hfnum: 0x%08x\n", hfnum.d32);
++			DWC_PRINTF("    hcchar: 0x%08x\n", hcchar.d32);
++			DWC_PRINTF("    hctsiz: 0x%08x\n", hctsiz.d32);
++			DWC_PRINTF("    hcint: 0x%08x\n", hcint.d32);
++			DWC_PRINTF("    hcintmsk: 0x%08x\n", hcintmsk.d32);
++		}
++		if (hc->xfer_started && hc->qh) {
++			dwc_otg_qtd_t *qtd;
++			dwc_otg_hcd_urb_t *urb;
++
++			DWC_CIRCLEQ_FOREACH(qtd, &hc->qh->qtd_list, qtd_list_entry) {
++				if (!qtd->in_process)
++					break;
++
++				urb = qtd->urb;
++			DWC_PRINTF("    URB Info:\n");
++			DWC_PRINTF("      qtd: %p, urb: %p\n", qtd, urb);
++			if (urb) {
++				DWC_PRINTF("      Dev: %d, EP: %d %s\n",
++					   dwc_otg_hcd_get_dev_addr(&urb->
++								    pipe_info),
++					   dwc_otg_hcd_get_ep_num(&urb->
++								  pipe_info),
++					   dwc_otg_hcd_is_pipe_in(&urb->
++								  pipe_info) ?
++					   "IN" : "OUT");
++				DWC_PRINTF("      Max packet size: %d\n",
++					   dwc_otg_hcd_get_mps(&urb->
++							       pipe_info));
++				DWC_PRINTF("      transfer_buffer: %p\n",
++					   urb->buf);
++				DWC_PRINTF("      transfer_dma: %p\n",
++					   (void *)urb->dma);
++				DWC_PRINTF("      transfer_buffer_length: %d\n",
++					   urb->length);
++					DWC_PRINTF("      actual_length: %d\n",
++						   urb->actual_length);
++				}
++			}
++		}
++	}
++	DWC_PRINTF("  non_periodic_channels: %d\n", hcd->non_periodic_channels);
++	DWC_PRINTF("  periodic_channels: %d\n", hcd->periodic_channels);
++	DWC_PRINTF("  periodic_usecs: %d\n", hcd->periodic_usecs);
++	np_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->core_global_regs->gnptxsts);
++	DWC_PRINTF("  NP Tx Req Queue Space Avail: %d\n",
++		   np_tx_status.b.nptxqspcavail);
++	DWC_PRINTF("  NP Tx FIFO Space Avail: %d\n",
++		   np_tx_status.b.nptxfspcavail);
++	p_tx_status.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hptxsts);
++	DWC_PRINTF("  P Tx Req Queue Space Avail: %d\n",
++		   p_tx_status.b.ptxqspcavail);
++	DWC_PRINTF("  P Tx FIFO Space Avail: %d\n", p_tx_status.b.ptxfspcavail);
++	dwc_otg_hcd_dump_frrem(hcd);
++	dwc_otg_dump_global_registers(hcd->core_if);
++	dwc_otg_dump_host_registers(hcd->core_if);
++	DWC_PRINTF
++	    ("************************************************************\n");
++	DWC_PRINTF("\n");
++#endif
++}
++
++#ifdef DEBUG
++void dwc_print_setup_data(uint8_t * setup)
++{
++	int i;
++	if (CHK_DEBUG_LEVEL(DBG_HCD)) {
++		DWC_PRINTF("Setup Data = MSB ");
++		for (i = 7; i >= 0; i--)
++			DWC_PRINTF("%02x ", setup[i]);
++		DWC_PRINTF("\n");
++		DWC_PRINTF("  bmRequestType Tranfer = %s\n",
++			   (setup[0] & 0x80) ? "Device-to-Host" :
++			   "Host-to-Device");
++		DWC_PRINTF("  bmRequestType Type = ");
++		switch ((setup[0] & 0x60) >> 5) {
++		case 0:
++			DWC_PRINTF("Standard\n");
++			break;
++		case 1:
++			DWC_PRINTF("Class\n");
++			break;
++		case 2:
++			DWC_PRINTF("Vendor\n");
++			break;
++		case 3:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bmRequestType Recipient = ");
++		switch (setup[0] & 0x1f) {
++		case 0:
++			DWC_PRINTF("Device\n");
++			break;
++		case 1:
++			DWC_PRINTF("Interface\n");
++			break;
++		case 2:
++			DWC_PRINTF("Endpoint\n");
++			break;
++		case 3:
++			DWC_PRINTF("Other\n");
++			break;
++		default:
++			DWC_PRINTF("Reserved\n");
++			break;
++		}
++		DWC_PRINTF("  bRequest = 0x%0x\n", setup[1]);
++		DWC_PRINTF("  wValue = 0x%0x\n", *((uint16_t *) & setup[2]));
++		DWC_PRINTF("  wIndex = 0x%0x\n", *((uint16_t *) & setup[4]));
++		DWC_PRINTF("  wLength = 0x%0x\n\n", *((uint16_t *) & setup[6]));
++	}
++}
++#endif
++
++void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd)
++{
++#if 0
++	DWC_PRINTF("Frame remaining at SOF:\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->frrem_samples, hcd->frrem_accum,
++		   (hcd->frrem_samples > 0) ?
++		   hcd->frrem_accum / hcd->frrem_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_7_samples,
++		   hcd->core_if->hfnum_7_frrem_accum,
++		   (hcd->core_if->hfnum_7_samples >
++		    0) ? hcd->core_if->hfnum_7_frrem_accum /
++		   hcd->core_if->hfnum_7_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_0_samples,
++		   hcd->core_if->hfnum_0_frrem_accum,
++		   (hcd->core_if->hfnum_0_samples >
++		    0) ? hcd->core_if->hfnum_0_frrem_accum /
++		   hcd->core_if->hfnum_0_samples : 0);
++	DWC_PRINTF("Frame remaining at start_transfer (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->core_if->hfnum_other_samples,
++		   hcd->core_if->hfnum_other_frrem_accum,
++		   (hcd->core_if->hfnum_other_samples >
++		    0) ? hcd->core_if->hfnum_other_frrem_accum /
++		   hcd->core_if->hfnum_other_samples : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point A (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_a, hcd->hfnum_7_frrem_accum_a,
++		   (hcd->hfnum_7_samples_a > 0) ?
++		   hcd->hfnum_7_frrem_accum_a / hcd->hfnum_7_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_a, hcd->hfnum_0_frrem_accum_a,
++		   (hcd->hfnum_0_samples_a > 0) ?
++		   hcd->hfnum_0_frrem_accum_a / hcd->hfnum_0_samples_a : 0);
++	DWC_PRINTF("Frame remaining at sample point A (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_a, hcd->hfnum_other_frrem_accum_a,
++		   (hcd->hfnum_other_samples_a > 0) ?
++		   hcd->hfnum_other_frrem_accum_a /
++		   hcd->hfnum_other_samples_a : 0);
++
++	DWC_PRINTF("\n");
++	DWC_PRINTF("Frame remaining at sample point B (uframe 7):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_7_samples_b, hcd->hfnum_7_frrem_accum_b,
++		   (hcd->hfnum_7_samples_b > 0) ?
++		   hcd->hfnum_7_frrem_accum_b / hcd->hfnum_7_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 0):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_0_samples_b, hcd->hfnum_0_frrem_accum_b,
++		   (hcd->hfnum_0_samples_b > 0) ?
++		   hcd->hfnum_0_frrem_accum_b / hcd->hfnum_0_samples_b : 0);
++	DWC_PRINTF("Frame remaining at sample point B (uframe 1-6):\n");
++	DWC_PRINTF("  samples %u, accum %llu, avg %llu\n",
++		   hcd->hfnum_other_samples_b, hcd->hfnum_other_frrem_accum_b,
++		   (hcd->hfnum_other_samples_b > 0) ?
++		   hcd->hfnum_other_frrem_accum_b /
++		   hcd->hfnum_other_samples_b : 0);
++#endif
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+new file mode 100644
+index 0000000..bb4f67a
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd.h
+@@ -0,0 +1,824 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd.h $
++ * $Revision: #58 $
++ * $Date: 2011/09/15 $
++ * $Change: 1846647 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_H__
++#define __DWC_HCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_core_if.h"
++#include "dwc_list.h"
++#include "dwc_otg_cil.h"
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Host Contoller Driver (HCD).
++ *
++ * The Host Controller Driver (HCD) is responsible for translating requests
++ * from the USB Driver into the appropriate actions on the DWC_otg controller.
++ * It isolates the USBD from the specifics of the controller by providing an
++ * API to the USBD.
++ */
++
++struct dwc_otg_hcd_pipe_info {
++	uint8_t dev_addr;
++	uint8_t ep_num;
++	uint8_t pipe_type;
++	uint8_t pipe_dir;
++	uint16_t mps;
++};
++
++struct dwc_otg_hcd_iso_packet_desc {
++	uint32_t offset;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_otg_qtd;
++
++struct dwc_otg_hcd_urb {
++	void *priv;
++	struct dwc_otg_qtd *qtd;
++	void *buf;
++	dwc_dma_t dma;
++	void *setup_packet;
++	dwc_dma_t setup_dma;
++	uint32_t length;
++	uint32_t actual_length;
++	uint32_t status;
++	uint32_t error_count;
++	uint32_t packet_count;
++	uint32_t flags;
++	uint16_t interval;
++	struct dwc_otg_hcd_pipe_info pipe_info;
++	struct dwc_otg_hcd_iso_packet_desc iso_descs[0];
++};
++
++static inline uint8_t dwc_otg_hcd_get_ep_num(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->ep_num;
++}
++
++static inline uint8_t dwc_otg_hcd_get_pipe_type(struct dwc_otg_hcd_pipe_info
++						*pipe)
++{
++	return pipe->pipe_type;
++}
++
++static inline uint16_t dwc_otg_hcd_get_mps(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return pipe->mps;
++}
++
++static inline uint8_t dwc_otg_hcd_get_dev_addr(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return pipe->dev_addr;
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_isoc(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_ISOCHRONOUS);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_int(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (pipe->pipe_type == UE_INTERRUPT);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_bulk(struct dwc_otg_hcd_pipe_info
++					       *pipe)
++{
++	return (pipe->pipe_type == UE_BULK);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_control(struct dwc_otg_hcd_pipe_info
++						  *pipe)
++{
++	return (pipe->pipe_type == UE_CONTROL);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_in(struct dwc_otg_hcd_pipe_info *pipe)
++{
++	return (pipe->pipe_dir == UE_DIR_IN);
++}
++
++static inline uint8_t dwc_otg_hcd_is_pipe_out(struct dwc_otg_hcd_pipe_info
++					      *pipe)
++{
++	return (!dwc_otg_hcd_is_pipe_in(pipe));
++}
++
++static inline void dwc_otg_hcd_fill_pipe(struct dwc_otg_hcd_pipe_info *pipe,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t pipe_type, uint8_t pipe_dir,
++					 uint16_t mps)
++{
++	pipe->dev_addr = devaddr;
++	pipe->ep_num = ep_num;
++	pipe->pipe_type = pipe_type;
++	pipe->pipe_dir = pipe_dir;
++	pipe->mps = mps;
++}
++
++/**
++ * Phases for control transfers.
++ */
++typedef enum dwc_otg_control_phase {
++	DWC_OTG_CONTROL_SETUP,
++	DWC_OTG_CONTROL_DATA,
++	DWC_OTG_CONTROL_STATUS
++} dwc_otg_control_phase_e;
++
++/** Transaction types. */
++typedef enum dwc_otg_transaction_type {
++	DWC_OTG_TRANSACTION_NONE,
++	DWC_OTG_TRANSACTION_PERIODIC,
++	DWC_OTG_TRANSACTION_NON_PERIODIC,
++	DWC_OTG_TRANSACTION_ALL
++} dwc_otg_transaction_type_e;
++
++struct dwc_otg_qh;
++
++/**
++ * A Queue Transfer Descriptor (QTD) holds the state of a bulk, control,
++ * interrupt, or isochronous transfer. A single QTD is created for each URB
++ * (of one of these types) submitted to the HCD. The transfer associated with
++ * a QTD may require one or multiple transactions.
++ *
++ * A QTD is linked to a Queue Head, which is entered in either the
++ * non-periodic or periodic schedule for execution. When a QTD is chosen for
++ * execution, some or all of its transactions may be executed. After
++ * execution, the state of the QTD is updated. The QTD may be retired if all
++ * its transactions are complete or if an error occurred. Otherwise, it
++ * remains in the schedule so more transactions can be executed later.
++ */
++typedef struct dwc_otg_qtd {
++	/**
++	 * Determines the PID of the next data packet for the data phase of
++	 * control transfers. Ignored for other transfer types.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Current phase for control transfers (Setup, Data, or Status). */
++	dwc_otg_control_phase_e control_phase;
++
++	/** Keep track of the current split type
++	 * for FS/LS endpoints on a HS Hub */
++	uint8_t complete_split;
++
++	/** How many bytes transferred during SSPLIT OUT */
++	uint32_t ssplit_out_xfer_count;
++
++	/**
++	 * Holds the number of bus errors that have occurred for a transaction
++	 * within this transfer.
++	 */
++	uint8_t error_count;
++
++	/**
++	 * Index of the next frame descriptor for an isochronous transfer. A
++	 * frame descriptor describes the buffer position and length of the
++	 * data to be transferred in the next scheduled (micro)frame of an
++	 * isochronous transfer. It also holds status for that transaction.
++	 * The frame index starts at 0.
++	 */
++	uint16_t isoc_frame_index;
++
++	/** Position of the ISOC split on full/low speed */
++	uint8_t isoc_split_pos;
++
++	/** Position of the ISOC split in the buffer for the current frame */
++	uint16_t isoc_split_offset;
++
++	/** URB for this transfer */
++	struct dwc_otg_hcd_urb *urb;
++
++	struct dwc_otg_qh *qh;
++
++	/** This list of QTDs */
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_qtd) qtd_list_entry;
++
++	/** Indicates if this QTD is currently processed by HW. */
++	uint8_t in_process;
++
++	/** Number of DMA descriptors for this QTD */
++	uint8_t n_desc;
++
++	/**
++	 * Last activated frame(packet) index.
++	 * Used in Descriptor DMA mode only.
++	 */
++	uint16_t isoc_frame_index_last;
++
++} dwc_otg_qtd_t;
++
++DWC_CIRCLEQ_HEAD(dwc_otg_qtd_list, dwc_otg_qtd);
++
++/**
++ * A Queue Head (QH) holds the static characteristics of an endpoint and
++ * maintains a list of transfers (QTDs) for that endpoint. A QH structure may
++ * be entered in either the non-periodic or periodic schedule.
++ */
++typedef struct dwc_otg_qh {
++	/**
++	 * Endpoint type.
++	 * One of the following values:
++	 *	- UE_CONTROL
++	 *	- UE_BULK
++	 *	- UE_INTERRUPT
++	 *	- UE_ISOCHRONOUS
++	 */
++	uint8_t ep_type;
++	uint8_t ep_is_in;
++
++	/** wMaxPacketSize Field of Endpoint Descriptor. */
++	uint16_t maxp;
++
++	/**
++	 * Device speed.
++	 * One of the following values:
++	 *	- DWC_OTG_EP_SPEED_LOW
++	 *	- DWC_OTG_EP_SPEED_FULL
++	 *	- DWC_OTG_EP_SPEED_HIGH
++	 */
++	uint8_t dev_speed;
++
++	/**
++	 * Determines the PID of the next data packet for non-control
++	 * transfers. Ignored for control transfers.<br>
++	 * One of the following values:
++	 *	- DWC_OTG_HC_PID_DATA0
++	 *	- DWC_OTG_HC_PID_DATA1
++	 */
++	uint8_t data_toggle;
++
++	/** Ping state if 1. */
++	uint8_t ping_state;
++
++	/**
++	 * List of QTDs for this QH.
++	 */
++	struct dwc_otg_qtd_list qtd_list;
++
++	/** Host channel currently processing transfers for this QH. */
++	struct dwc_hc *channel;
++
++	/** Full/low speed endpoint on high-speed hub requires split. */
++	uint8_t do_split;
++
++	/** @name Periodic schedule information */
++	/** @{ */
++
++	/** Bandwidth in microseconds per (micro)frame. */
++	uint16_t usecs;
++
++	/** Interval between transfers in (micro)frames. */
++	uint16_t interval;
++
++	/**
++	 * (micro)frame to initialize a periodic transfer. The transfer
++	 * executes in the following (micro)frame.
++	 */
++	uint16_t sched_frame;
++
++	/** (micro)frame at which last start split was initialized. */
++	uint16_t start_split_frame;
++
++	/** @} */
++
++	/**
++	 * Used instead of original buffer if
++	 * it(physical address) is not dword-aligned.
++	 */
++	uint8_t *dw_align_buf;
++	dwc_dma_t dw_align_buf_dma;
++
++	/** Entry for QH in either the periodic or non-periodic schedule. */
++	dwc_list_link_t qh_list_entry;
++
++	/** @name Descriptor DMA support */
++	/** @{ */
++
++	/** Descriptor List. */
++	dwc_otg_host_dma_desc_t *desc_list;
++
++	/** Descriptor List physical address. */
++	dwc_dma_t desc_list_dma;
++
++	/**
++	 * Xfer Bytes array.
++	 * Each element corresponds to a descriptor and indicates
++	 * original XferSize size value for the descriptor.
++	 */
++	uint32_t *n_bytes;
++
++	/** Actual number of transfer descriptors in a list. */
++	uint16_t ntd;
++
++	/** First activated isochronous transfer descriptor index. */
++	uint8_t td_first;
++	/** Last activated isochronous transfer descriptor index. */
++	uint8_t td_last;
++
++	/** @} */
++
++
++	uint16_t speed;
++	uint16_t frame_usecs[8];
++} dwc_otg_qh_t;
++
++DWC_CIRCLEQ_HEAD(hc_list, dwc_hc);
++
++/**
++ * This structure holds the state of the HCD, including the non-periodic and
++ * periodic schedules.
++ */
++struct dwc_otg_hcd {
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** DWC OTG Core Interface Layer */
++	dwc_otg_core_if_t *core_if;
++
++	/** Function HCD driver callbacks */
++	struct dwc_otg_hcd_function_ops *fops;
++
++	/** Internal DWC HCD Flags */
++	volatile union dwc_otg_hcd_internal_flags {
++		uint32_t d32;
++		struct {
++			unsigned port_connect_status_change:1;
++			unsigned port_connect_status:1;
++			unsigned port_reset_change:1;
++			unsigned port_enable_change:1;
++			unsigned port_suspend_change:1;
++			unsigned port_over_current_change:1;
++			unsigned port_l1_change:1;
++			unsigned reserved:26;
++		} b;
++	} flags;
++
++	/**
++	 * Inactive items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are not
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_inactive;
++
++	/**
++	 * Active items in the non-periodic schedule. This is a list of
++	 * Queue Heads. Transfers associated with these Queue Heads are
++	 * currently assigned to a host channel.
++	 */
++	dwc_list_link_t non_periodic_sched_active;
++
++	/**
++	 * Pointer to the next Queue Head to process in the active
++	 * non-periodic schedule.
++	 */
++	dwc_list_link_t *non_periodic_qh_ptr;
++
++	/**
++	 * Inactive items in the periodic schedule. This is a list of QHs for
++	 * periodic transfers that are _not_ scheduled for the next frame.
++	 * Each QH in the list has an interval counter that determines when it
++	 * needs to be scheduled for execution. This scheduling mechanism
++	 * allows only a simple calculation for periodic bandwidth used (i.e.
++	 * must assume that all periodic transfers may need to execute in the
++	 * same frame). However, it greatly simplifies scheduling and should
++	 * be sufficient for the vast majority of OTG hosts, which need to
++	 * connect to a small number of peripherals at one time.
++	 *
++	 * Items move from this list to periodic_sched_ready when the QH
++	 * interval counter is 0 at SOF.
++	 */
++	dwc_list_link_t periodic_sched_inactive;
++
++	/**
++	 * List of periodic QHs that are ready for execution in the next
++	 * frame, but have not yet been assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_assigned as host
++	 * channels become available during the current frame.
++	 */
++	dwc_list_link_t periodic_sched_ready;
++
++	/**
++	 * List of periodic QHs to be executed in the next frame that are
++	 * assigned to host channels.
++	 *
++	 * Items move from this list to periodic_sched_queued as the
++	 * transactions for the QH are queued to the DWC_otg controller.
++	 */
++	dwc_list_link_t periodic_sched_assigned;
++
++	/**
++	 * List of periodic QHs that have been queued for execution.
++	 *
++	 * Items move from this list to either periodic_sched_inactive or
++	 * periodic_sched_ready when the channel associated with the transfer
++	 * is released. If the interval for the QH is 1, the item moves to
++	 * periodic_sched_ready because it must be rescheduled for the next
++	 * frame. Otherwise, the item moves to periodic_sched_inactive.
++	 */
++	dwc_list_link_t periodic_sched_queued;
++
++	/**
++	 * Total bandwidth claimed so far for periodic transfers. This value
++	 * is in microseconds per (micro)frame. The assumption is that all
++	 * periodic transfers may occur in the same (micro)frame.
++	 */
++	uint16_t periodic_usecs;
++
++	/**
++	 * Total bandwidth claimed so far for all periodic transfers
++	 * in a frame.
++	 * This will include a mixture of HS and FS transfers.
++	 * Units are microseconds per (micro)frame.
++	 * We have a budget per frame and have to schedule
++	 * transactions accordingly.
++	 * Watch out for the fact that things are actually scheduled for the
++	 * "next frame".
++	 */
++	uint16_t                frame_usecs[8];
++
++
++	/**
++	 * Frame number read from the core at SOF. The value ranges from 0 to
++	 * DWC_HFNUM_MAX_FRNUM.
++	 */
++	uint16_t frame_number;
++
++	/**
++	 * Count of periodic QHs, if using several eps. For SOF enable/disable.
++	 */
++	uint16_t periodic_qh_count;
++
++	/**
++	 * Free host channels in the controller. This is a list of
++	 * dwc_hc_t items.
++	 */
++	struct hc_list free_hc_list;
++	/**
++	 * Number of host channels assigned to periodic transfers. Currently
++	 * assuming that there is a dedicated host channel for each periodic
++	 * transaction and at least one host channel available for
++	 * non-periodic transactions.
++	 */
++	int periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int non_periodic_channels; /* microframe_schedule==0 */
++
++	/**
++	 * Number of host channels assigned to non-periodic transfers.
++	 */
++	int available_host_channels;
++
++	/**
++	 * Array of pointers to the host channel descriptors. Allows accessing
++	 * a host channel descriptor given the host channel number. This is
++	 * useful in interrupt handlers.
++	 */
++	struct dwc_hc *hc_ptr_array[MAX_EPS_CHANNELS];
++
++	/**
++	 * Buffer to use for any data received during the status phase of a
++	 * control transfer. Normally no data is transferred during the status
++	 * phase. This buffer is used as a bit bucket.
++	 */
++	uint8_t *status_buf;
++
++	/**
++	 * DMA address for status_buf.
++	 */
++	dma_addr_t status_buf_dma;
++#define DWC_OTG_HCD_STATUS_BUF_SIZE 64
++
++	/**
++	 * Connection timer. An OTG host must display a message if the device
++	 * does not connect. Started when the VBus power is turned on via
++	 * sysfs attribute "buspower".
++	 */
++	dwc_timer_t *conn_timer;
++
++	/* Tasket to do a reset */
++	dwc_tasklet_t *reset_tasklet;
++
++	/*  */
++	dwc_spinlock_t *lock;
++
++	/**
++	 * Private data that could be used by OS wrapper.
++	 */
++	void *priv;
++
++	uint8_t otg_port;
++
++	/** Frame List */
++	uint32_t *frame_list;
++
++	/** Frame List DMA address */
++	dma_addr_t frame_list_dma;
++
++#ifdef DEBUG
++	uint32_t frrem_samples;
++	uint64_t frrem_accum;
++
++	uint32_t hfnum_7_samples_a;
++	uint64_t hfnum_7_frrem_accum_a;
++	uint32_t hfnum_0_samples_a;
++	uint64_t hfnum_0_frrem_accum_a;
++	uint32_t hfnum_other_samples_a;
++	uint64_t hfnum_other_frrem_accum_a;
++
++	uint32_t hfnum_7_samples_b;
++	uint64_t hfnum_7_frrem_accum_b;
++	uint32_t hfnum_0_samples_b;
++	uint64_t hfnum_0_frrem_accum_b;
++	uint32_t hfnum_other_samples_b;
++	uint64_t hfnum_other_frrem_accum_b;
++#endif
++};
++
++/** @name Transaction Execution Functions */
++/** @{ */
++extern dwc_otg_transaction_type_e dwc_otg_hcd_select_transactions(dwc_otg_hcd_t
++								  * hcd);
++extern void dwc_otg_hcd_queue_transactions(dwc_otg_hcd_t * hcd,
++					   dwc_otg_transaction_type_e tr_type);
++
++/** @} */
++
++/** @name Interrupt Handler Functions */
++/** @{ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t *
++							 dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_incomplete_periodic_intr(dwc_otg_hcd_t *
++							   dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_conn_id_status_change_intr(dwc_otg_hcd_t *
++							     dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_disconnect_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd,
++					    uint32_t num);
++extern int32_t dwc_otg_hcd_handle_session_req_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++extern int32_t dwc_otg_hcd_handle_wakeup_detected_intr(dwc_otg_hcd_t *
++						       dwc_otg_hcd);
++/** @} */
++
++/** @name Schedule Queue Functions */
++/** @{ */
++
++/* Implemented in dwc_otg_hcd_queue.c */
++extern dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++					   dwc_otg_hcd_urb_t * urb, int atomic_alloc);
++extern void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				      int sched_csplit);
++
++/** Remove and free a QH */
++static inline void dwc_otg_hcd_qh_remove_and_free(dwc_otg_hcd_t * hcd,
++						  dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	dwc_otg_hcd_qh_remove(hcd, qh);
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++	dwc_otg_hcd_qh_free(hcd, qh);
++}
++
++/** Allocates memory for a QH structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qh_t *dwc_otg_hcd_qh_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qh_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qh_t));
++	else
++		return (dwc_otg_qh_t *) DWC_ALLOC(sizeof(dwc_otg_qh_t));
++}
++
++extern dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb,
++					     int atomic_alloc);
++extern void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb);
++extern int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd, dwc_otg_hcd_t * dwc_otg_hcd,
++			       dwc_otg_qh_t ** qh, int atomic_alloc);
++
++/** Allocates memory for a QTD structure.
++ * @return Returns the memory allocate or NULL on error. */
++static inline dwc_otg_qtd_t *dwc_otg_hcd_qtd_alloc(int atomic_alloc)
++{
++	if (atomic_alloc)
++		return (dwc_otg_qtd_t *) DWC_ALLOC_ATOMIC(sizeof(dwc_otg_qtd_t));
++	else
++		return (dwc_otg_qtd_t *) DWC_ALLOC(sizeof(dwc_otg_qtd_t));
++}
++
++/** Frees the memory for a QTD structure.  QTD should already be removed from
++ * list.
++ * @param qtd QTD to free.*/
++static inline void dwc_otg_hcd_qtd_free(dwc_otg_qtd_t * qtd)
++{
++	DWC_FREE(qtd);
++}
++
++/** Removes a QTD from list.
++ * @param hcd HCD instance.
++ * @param qtd QTD to remove from list.
++ * @param qh QTD belongs to.
++ */
++static inline void dwc_otg_hcd_qtd_remove(dwc_otg_hcd_t * hcd,
++					  dwc_otg_qtd_t * qtd,
++					  dwc_otg_qh_t * qh)
++{
++	DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++}
++
++/** Remove and free a QTD
++  * Need to disable IRQ and hold hcd lock while calling this function out of
++  * interrupt servicing chain */
++static inline void dwc_otg_hcd_qtd_remove_and_free(dwc_otg_hcd_t * hcd,
++						   dwc_otg_qtd_t * qtd,
++						   dwc_otg_qh_t * qh)
++{
++	dwc_otg_hcd_qtd_remove(hcd, qtd, qh);
++	dwc_otg_hcd_qtd_free(qtd);
++}
++
++/** @} */
++
++/** @name Descriptor DMA Supporting Functions */
++/** @{ */
++
++extern void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++					   dwc_hc_t * hc,
++					   dwc_otg_hc_regs_t * hc_regs,
++					   dwc_otg_halt_status_e halt_status);
++
++extern int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++extern void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh);
++
++/** @} */
++
++/** @name Internal Functions */
++/** @{ */
++dwc_otg_qh_t *dwc_urb_to_qh(dwc_otg_hcd_urb_t * urb);
++/** @} */
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++extern int dwc_otg_hcd_get_hc_for_lpm_tran(dwc_otg_hcd_t * hcd,
++					   uint8_t devaddr);
++extern void dwc_otg_hcd_free_hc_from_lpm(dwc_otg_hcd_t * hcd);
++#endif
++
++/** Gets the QH that contains the list_head */
++#define dwc_list_to_qh(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qh_t, qh_list_entry)
++
++/** Gets the QTD that contains the list_head */
++#define dwc_list_to_qtd(_list_head_ptr_) container_of(_list_head_ptr_, dwc_otg_qtd_t, qtd_list_entry)
++
++/** Check if QH is non-periodic  */
++#define dwc_qh_is_non_per(_qh_ptr_) ((_qh_ptr_->ep_type == UE_BULK) || \
++				     (_qh_ptr_->ep_type == UE_CONTROL))
++
++/** High bandwidth multiplier as encoded in highspeed endpoint descriptors */
++#define dwc_hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03))
++
++/** Packet size for any kind of endpoint descriptor */
++#define dwc_max_packet(wMaxPacketSize) ((wMaxPacketSize) & 0x07ff)
++
++/**
++ * Returns true if _frame1 is less than or equal to _frame2. The comparison is
++ * done modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the
++ * frame number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_le(uint16_t frame1, uint16_t frame2)
++{
++	return ((frame2 - frame1) & DWC_HFNUM_MAX_FRNUM) <=
++	    (DWC_HFNUM_MAX_FRNUM >> 1);
++}
++
++/**
++ * Returns true if _frame1 is greater than _frame2. The comparison is done
++ * modulo DWC_HFNUM_MAX_FRNUM. This accounts for the rollover of the frame
++ * number when the max frame number is reached.
++ */
++static inline int dwc_frame_num_gt(uint16_t frame1, uint16_t frame2)
++{
++	return (frame1 != frame2) &&
++	    (((frame1 - frame2) & DWC_HFNUM_MAX_FRNUM) <
++	     (DWC_HFNUM_MAX_FRNUM >> 1));
++}
++
++/**
++ * Increments _frame by the amount specified by _inc. The addition is done
++ * modulo DWC_HFNUM_MAX_FRNUM. Returns the incremented value.
++ */
++static inline uint16_t dwc_frame_num_inc(uint16_t frame, uint16_t inc)
++{
++	return (frame + inc) & DWC_HFNUM_MAX_FRNUM;
++}
++
++static inline uint16_t dwc_full_frame_num(uint16_t frame)
++{
++	return (frame & DWC_HFNUM_MAX_FRNUM) >> 3;
++}
++
++static inline uint16_t dwc_micro_frame_num(uint16_t frame)
++{
++	return frame & 0x7;
++}
++
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd);
++
++#ifdef DEBUG
++/**
++ * Macro to sample the remaining PHY clocks left in the current frame. This
++ * may be used during debugging to determine the average time it takes to
++ * execute sections of code. There are two possible sample points, "a" and
++ * "b", so the _letter argument must be one of these values.
++ *
++ * To dump the average sample times, read the "hcd_frrem" sysfs attribute. For
++ * example, "cat /sys/devices/lm0/hcd_frrem".
++ */
++#define dwc_sample_frrem(_hcd, _qh, _letter) \
++{ \
++	hfnum_data_t hfnum; \
++	dwc_otg_qtd_t *qtd; \
++	qtd = list_entry(_qh->qtd_list.next, dwc_otg_qtd_t, qtd_list_entry); \
++	if (usb_pipeint(qtd->urb->pipe) && _qh->start_split_frame != 0 && !qtd->complete_split) { \
++		hfnum.d32 = DWC_READ_REG32(&_hcd->core_if->host_if->host_global_regs->hfnum); \
++		switch (hfnum.b.frnum & 0x7) { \
++		case 7: \
++			_hcd->hfnum_7_samples_##_letter++; \
++			_hcd->hfnum_7_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		case 0: \
++			_hcd->hfnum_0_samples_##_letter++; \
++			_hcd->hfnum_0_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		default: \
++			_hcd->hfnum_other_samples_##_letter++; \
++			_hcd->hfnum_other_frrem_accum_##_letter += hfnum.b.frrem; \
++			break; \
++		} \
++	} \
++}
++#else
++#define dwc_sample_frrem(_hcd, _qh, _letter)
++#endif
++#endif
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
+new file mode 100644
+index 0000000..274967b
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_ddma.c
+@@ -0,0 +1,1133 @@
++/*==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_ddma.c $
++ * $Revision: #10 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869464 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/** @file
++ * This file contains Descriptor DMA support implementation for host mode.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++static inline uint8_t frame_list_idx(uint16_t frame)
++{
++	return (frame & (MAX_FRLIST_EN_NUM - 1));
++}
++
++static inline uint16_t desclist_idx_inc(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx + inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t desclist_idx_dec(uint16_t idx, uint16_t inc, uint8_t speed)
++{
++	return (idx - inc) &
++	    (((speed ==
++	       DWC_OTG_EP_SPEED_HIGH) ? MAX_DMA_DESC_NUM_HS_ISOC :
++	      MAX_DMA_DESC_NUM_GENERIC) - 1);
++}
++
++static inline uint16_t max_desc_num(dwc_otg_qh_t * qh)
++{
++	return (((qh->ep_type == UE_ISOCHRONOUS)
++		 && (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH))
++		? MAX_DMA_DESC_NUM_HS_ISOC : MAX_DMA_DESC_NUM_GENERIC);
++}
++static inline uint16_t frame_incr_val(dwc_otg_qh_t * qh)
++{
++	return ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH)
++		? ((qh->interval + 8 - 1) / 8)
++		: qh->interval);
++}
++
++static int desc_list_alloc(dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	qh->desc_list = (dwc_otg_host_dma_desc_t *)
++	    DWC_DMA_ALLOC(sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh),
++			  &qh->desc_list_dma);
++
++	if (!qh->desc_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: DMA descriptor list allocation failed\n", __func__);
++
++	}
++
++	dwc_memset(qh->desc_list, 0x00,
++		   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++
++	qh->n_bytes =
++	    (uint32_t *) DWC_ALLOC(sizeof(uint32_t) * max_desc_num(qh));
++
++	if (!qh->n_bytes) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR
++		    ("%s: Failed to allocate array for descriptors' size actual values\n",
++		     __func__);
++
++	}
++	return retval;
++
++}
++
++static void desc_list_free(dwc_otg_qh_t * qh)
++{
++	if (qh->desc_list) {
++		DWC_DMA_FREE(max_desc_num(qh), qh->desc_list,
++			     qh->desc_list_dma);
++		qh->desc_list = NULL;
++	}
++
++	if (qh->n_bytes) {
++		DWC_FREE(qh->n_bytes);
++		qh->n_bytes = NULL;
++	}
++}
++
++static int frame_list_alloc(dwc_otg_hcd_t * hcd)
++{
++	int retval = 0;
++	if (hcd->frame_list)
++		return 0;
++
++	hcd->frame_list = DWC_DMA_ALLOC(4 * MAX_FRLIST_EN_NUM,
++					&hcd->frame_list_dma);
++	if (!hcd->frame_list) {
++		retval = -DWC_E_NO_MEMORY;
++		DWC_ERROR("%s: Frame List allocation failed\n", __func__);
++	}
++
++	dwc_memset(hcd->frame_list, 0x00, 4 * MAX_FRLIST_EN_NUM);
++
++	return retval;
++}
++
++static void frame_list_free(dwc_otg_hcd_t * hcd)
++{
++	if (!hcd->frame_list)
++		return;
++
++	DWC_DMA_FREE(4 * MAX_FRLIST_EN_NUM, hcd->frame_list, hcd->frame_list_dma);
++	hcd->frame_list = NULL;
++}
++
++static void per_sched_enable(dwc_otg_hcd_t * hcd, uint16_t fr_list_en)
++{
++
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++
++	if (hcfg.b.perschedena) {
++		/* already enabled */
++		return;
++	}
++
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hflbaddr,
++			hcd->frame_list_dma);
++
++	switch (fr_list_en) {
++	case 64:
++		hcfg.b.frlisten = 3;
++		break;
++	case 32:
++		hcfg.b.frlisten = 2;
++		break;
++	case 16:
++		hcfg.b.frlisten = 1;
++		break;
++	case 8:
++		hcfg.b.frlisten = 0;
++		break;
++	default:
++		break;
++	}
++
++	hcfg.b.perschedena = 1;
++
++	DWC_DEBUGPL(DBG_HCD, "Enabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++
++}
++
++static void per_sched_disable(dwc_otg_hcd_t * hcd)
++{
++	hcfg_data_t hcfg;
++
++	hcfg.d32 = DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hcfg);
++
++	if (!hcfg.b.perschedena) {
++		/* already disabled */
++		return;
++	}
++	hcfg.b.perschedena = 0;
++
++	DWC_DEBUGPL(DBG_HCD, "Disabling Periodic schedule\n");
++	DWC_WRITE_REG32(&hcd->core_if->host_if->host_global_regs->hcfg, hcfg.d32);
++}
++
++/*
++ * Activates/Deactivates FrameList entries for the channel
++ * based on endpoint servicing period.
++ */
++void update_frame_list(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, uint8_t enable)
++{
++	uint16_t i, j, inc;
++	dwc_hc_t *hc = NULL;
++
++	if (!qh->channel) {
++		DWC_ERROR("qh->channel = %p", qh->channel);
++		return;
++	}
++
++	if (!hcd) {
++		DWC_ERROR("------hcd = %p", hcd);
++		return;
++	}
++
++	if (!hcd->frame_list) {
++		DWC_ERROR("-------hcd->frame_list = %p", hcd->frame_list);
++		return;
++	}
++
++	hc = qh->channel;
++	inc = frame_incr_val(qh);
++	if (qh->ep_type == UE_ISOCHRONOUS)
++		i = frame_list_idx(qh->sched_frame);
++	else
++		i = 0;
++
++	j = i;
++	do {
++		if (enable)
++			hcd->frame_list[j] |= (1 << hc->hc_num);
++		else
++			hcd->frame_list[j] &= ~(1 << hc->hc_num);
++		j = (j + inc) & (MAX_FRLIST_EN_NUM - 1);
++	}
++	while (j != i);
++	if (!enable)
++		return;
++	hc->schinfo = 0;
++	if (qh->channel->speed == DWC_OTG_EP_SPEED_HIGH) {
++		j = 1;
++		/* TODO - check this */
++		inc = (8 + qh->interval - 1) / qh->interval;
++		for (i = 0; i < inc; i++) {
++			hc->schinfo |= j;
++			j = j << qh->interval;
++		}
++	} else {
++		hc->schinfo = 0xff;
++	}
++}
++
++#if 1
++void dump_frame_list(dwc_otg_hcd_t * hcd)
++{
++	int i = 0;
++	DWC_PRINTF("--FRAME LIST (hex) --\n");
++	for (i = 0; i < MAX_FRLIST_EN_NUM; i++) {
++		DWC_PRINTF("%x\t", hcd->frame_list[i]);
++		if (!(i % 8) && i)
++			DWC_PRINTF("\n");
++	}
++	DWC_PRINTF("\n----\n");
++
++}
++#endif
++
++static void release_channel_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC();
++
++	dwc_hc_t *hc = qh->channel;
++	if (dwc_qh_is_non_per(qh)) {
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		if (!microframe_schedule)
++			hcd->non_periodic_channels--;
++		else
++			hcd->available_host_channels++;
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	} else
++		update_frame_list(hcd, qh, 0);
++
++	/*
++	 * The condition is added to prevent double cleanup try in case of device
++	 * disconnect. See channel cleanup in dwc_otg_hcd_disconnect_cb().
++	 */
++	if (hc->qh) {
++		dwc_otg_hc_cleanup(hcd->core_if, hc);
++		DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++		hc->qh = NULL;
++	}
++
++	qh->channel = NULL;
++	qh->ntd = 0;
++
++	if (qh->desc_list) {
++		dwc_memset(qh->desc_list, 0x00,
++			   sizeof(dwc_otg_host_dma_desc_t) * max_desc_num(qh));
++	}
++	DWC_SPINLOCK_FREE(channel_lock);
++}
++
++/**
++ * Initializes a QH structure's Descriptor DMA related members.
++ * Allocates memory for descriptor list.
++ * On first periodic QH, allocates memory for FrameList
++ * and enables periodic scheduling.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_init_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int retval = 0;
++
++	if (qh->do_split) {
++		DWC_ERROR("SPLIT Transfers are not supported in Descriptor DMA.\n");
++		return -1;
++	}
++
++	retval = desc_list_alloc(qh);
++
++	if ((retval == 0)
++	    && (qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)) {
++		if (!hcd->frame_list) {
++			retval = frame_list_alloc(hcd);
++			/* Enable periodic schedule on first periodic QH */
++			if (retval == 0)
++				per_sched_enable(hcd, MAX_FRLIST_EN_NUM);
++		}
++	}
++
++	qh->ntd = 0;
++
++	return retval;
++}
++
++/**
++ * Frees descriptor list memory associated with the QH.
++ * If QH is periodic and the last, frees FrameList memory
++ * and disables periodic scheduling.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ */
++void dwc_otg_hcd_qh_free_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	desc_list_free(qh);
++
++	/*
++	 * Channel still assigned due to some reasons.
++	 * Seen on Isoc URB dequeue. Channel halted but no subsequent
++	 * ChHalted interrupt to release the channel. Afterwards
++	 * when it comes here from endpoint disable routine
++	 * channel remains assigned.
++	 */
++	if (qh->channel)
++		release_channel_ddma(hcd, qh);
++
++	if ((qh->ep_type == UE_ISOCHRONOUS || qh->ep_type == UE_INTERRUPT)
++	    && (microframe_schedule || !hcd->periodic_channels) && hcd->frame_list) {
++
++		per_sched_disable(hcd);
++		frame_list_free(hcd);
++	}
++}
++
++static uint8_t frame_to_desc_idx(dwc_otg_qh_t * qh, uint16_t frame_idx)
++{
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/*
++		 * Descriptor set(8 descriptors) index
++		 * which is 8-aligned.
++		 */
++		return (frame_idx & ((MAX_DMA_DESC_NUM_HS_ISOC / 8) - 1)) * 8;
++	} else {
++		return (frame_idx & (MAX_DMA_DESC_NUM_GENERIC - 1));
++	}
++}
++
++/*
++ * Determine starting frame for Isochronous transfer.
++ * Few frames skipped to prevent race condition with HC.
++ */
++static uint8_t calc_starting_frame(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++				   uint8_t * skip_frames)
++{
++	uint16_t frame = 0;
++	hcd->frame_number = dwc_otg_hcd_get_frame_number(hcd);
++
++	/* sched_frame is always frame number(not uFrame) both in FS and HS !! */
++
++	/*
++	 * skip_frames is used to limit activated descriptors number
++	 * to avoid the situation when HC services the last activated
++	 * descriptor firstly.
++	 * Example for FS:
++	 * Current frame is 1, scheduled frame is 3. Since HC always fetches the descriptor
++	 * corresponding to curr_frame+1, the descriptor corresponding to frame 2
++	 * will be fetched. If the number of descriptors is max=64 (or greather) the
++	 * list will be fully programmed with Active descriptors and it is possible
++	 * case(rare) that the latest descriptor(considering rollback) corresponding
++	 * to frame 2 will be serviced first. HS case is more probable because, in fact,
++	 * up to 11 uframes(16 in the code) may be skipped.
++	 */
++	if (qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) {
++		/*
++		 * Consider uframe counter also, to start xfer asap.
++		 * If half of the frame elapsed skip 2 frames otherwise
++		 * just 1 frame.
++		 * Starting descriptor index must be 8-aligned, so
++		 * if the current frame is near to complete the next one
++		 * is skipped as well.
++		 */
++
++		if (dwc_micro_frame_num(hcd->frame_number) >= 5) {
++			*skip_frames = 2 * 8;
++			frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		} else {
++			*skip_frames = 1 * 8;
++			frame = dwc_frame_num_inc(hcd->frame_number, *skip_frames);
++		}
++
++		frame = dwc_full_frame_num(frame);
++	} else {
++		/*
++		 * Two frames are skipped for FS - the current and the next.
++		 * But for descriptor programming, 1 frame(descriptor) is enough,
++		 * see example above.
++		 */
++		*skip_frames = 1;
++		frame = dwc_frame_num_inc(hcd->frame_number, 2);
++	}
++
++	return frame;
++}
++
++/*
++ * Calculate initial descriptor index for isochronous transfer
++ * based on scheduled frame.
++ */
++static uint8_t recalc_initial_desc_idx(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	uint16_t frame = 0, fr_idx, fr_idx_tmp;
++	uint8_t skip_frames = 0;
++	/*
++	 * With current ISOC processing algorithm the channel is being
++	 * released when no more QTDs in the list(qh->ntd == 0).
++	 * Thus this function is called only when qh->ntd == 0 and qh->channel == 0.
++	 *
++	 * So qh->channel != NULL branch is not used and just not removed from the
++	 * source file. It is required for another possible approach which is,
++	 * do not disable and release the channel when ISOC session completed,
++	 * just move QH to inactive schedule until new QTD arrives.
++	 * On new QTD, the QH moved back to 'ready' schedule,
++	 * starting frame and therefore starting desc_index are recalculated.
++	 * In this case channel is released only on ep_disable.
++	 */
++
++	/* Calculate starting descriptor index. For INTERRUPT endpoint it is always 0. */
++	if (qh->channel) {
++		frame = calc_starting_frame(hcd, qh, &skip_frames);
++		/*
++		 * Calculate initial descriptor index based on FrameList current bitmap
++		 * and servicing period.
++		 */
++		fr_idx_tmp = frame_list_idx(frame);
++		fr_idx =
++		    (MAX_FRLIST_EN_NUM + frame_list_idx(qh->sched_frame) -
++		     fr_idx_tmp)
++		    % frame_incr_val(qh);
++		fr_idx = (fr_idx + fr_idx_tmp) % MAX_FRLIST_EN_NUM;
++	} else {
++		qh->sched_frame = calc_starting_frame(hcd, qh, &skip_frames);
++		fr_idx = frame_list_idx(qh->sched_frame);
++	}
++
++	qh->td_first = qh->td_last = frame_to_desc_idx(qh, fr_idx);
++
++	return skip_frames;
++}
++
++#define	ISOC_URB_GIVEBACK_ASAP
++
++#define MAX_ISOC_XFER_SIZE_FS 1023
++#define MAX_ISOC_XFER_SIZE_HS 3072
++#define DESCNUM_THRESHOLD 4
++
++static void init_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       uint8_t skip_frames)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, inc, n_desc, ntd_max, max_xfer_size;
++
++	idx = qh->td_last;
++	inc = qh->interval;
++	n_desc = 0;
++
++	ntd_max = (max_desc_num(qh) + qh->interval - 1) / qh->interval;
++	if (skip_frames && !qh->channel)
++		ntd_max = ntd_max - skip_frames / qh->interval;
++
++	max_xfer_size =
++	    (qh->dev_speed ==
++	     DWC_OTG_EP_SPEED_HIGH) ? MAX_ISOC_XFER_SIZE_HS :
++	    MAX_ISOC_XFER_SIZE_FS;
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++		while ((qh->ntd < ntd_max)
++		       && (qtd->isoc_frame_index_last <
++			   qtd->urb->packet_count)) {
++
++			dma_desc = &qh->desc_list[idx];
++			dwc_memset(dma_desc, 0x00, sizeof(dwc_otg_host_dma_desc_t));
++
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index_last];
++
++			if (frame_desc->length > max_xfer_size)
++				qh->n_bytes[idx] = max_xfer_size;
++			else
++				qh->n_bytes[idx] = frame_desc->length;
++			dma_desc->status.b_isoc.n_bytes = qh->n_bytes[idx];
++			dma_desc->status.b_isoc.a = 1;
++			dma_desc->status.b_isoc.sts = 0;
++
++			dma_desc->buf = qtd->urb->dma + frame_desc->offset;
++
++			qh->ntd++;
++
++			qtd->isoc_frame_index_last++;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++			/*
++			 * Set IOC for each descriptor corresponding to the
++			 * last frame of the URB.
++			 */
++			if (qtd->isoc_frame_index_last ==
++			    qtd->urb->packet_count)
++				dma_desc->status.b_isoc.ioc = 1;
++
++#endif
++			idx = desclist_idx_inc(idx, inc, qh->dev_speed);
++			n_desc++;
++
++		}
++		qtd->in_process = 1;
++	}
++
++	qh->td_last = idx;
++
++#ifdef	ISOC_URB_GIVEBACK_ASAP
++	/* Set IOC for the last descriptor if descriptor list is full */
++	if (qh->ntd == ntd_max) {
++		idx = desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++		qh->desc_list[idx].status.b_isoc.ioc = 1;
++	}
++#else
++	/*
++	 * Set IOC bit only for one descriptor.
++	 * Always try to be ahead of HW processing,
++	 * i.e. on IOC generation driver activates next descriptors but
++	 * core continues to process descriptors followed the one with IOC set.
++	 */
++
++	if (n_desc > DESCNUM_THRESHOLD) {
++		/*
++		 * Move IOC "up". Required even if there is only one QTD
++		 * in the list, cause QTDs migth continue to be queued,
++		 * but during the activation it was only one queued.
++		 * Actually more than one QTD might be in the list if this function called
++		 * from XferCompletion - QTDs was queued during HW processing of the previous
++		 * descriptor chunk.
++		 */
++		idx = dwc_desclist_idx_dec(idx, inc * ((qh->ntd + 1) / 2), qh->dev_speed);
++	} else {
++		/*
++		 * Set the IOC for the latest descriptor
++		 * if either number of descriptor is not greather than threshold
++		 * or no more new descriptors activated.
++		 */
++		idx = dwc_desclist_idx_dec(qh->td_last, inc, qh->dev_speed);
++	}
++
++	qh->desc_list[idx].status.b_isoc.ioc = 1;
++#endif
++}
++
++static void init_non_isoc_dma_desc(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++
++	dwc_hc_t *hc;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	dwc_otg_qtd_t *qtd;
++	int num_packets, len, n_desc = 0;
++
++	hc = qh->channel;
++
++	/*
++	 * Start with hc->xfer_buff initialized in
++	 * assign_and_init_hc(), then if SG transfer consists of multiple URBs,
++	 * this pointer re-assigned to the buffer of the currently processed QTD.
++	 * For non-SG request there is always one QTD active.
++	 */
++
++	DWC_CIRCLEQ_FOREACH(qtd, &qh->qtd_list, qtd_list_entry) {
++
++		if (n_desc) {
++			/* SG request - more than 1 QTDs */
++			hc->xfer_buff = (uint8_t *)qtd->urb->dma + qtd->urb->actual_length;
++			hc->xfer_len = qtd->urb->length - qtd->urb->actual_length;
++		}
++
++		qtd->n_desc = 0;
++
++		do {
++			dma_desc = &qh->desc_list[n_desc];
++			len = hc->xfer_len;
++
++			if (len > MAX_DMA_DESC_SIZE)
++				len = MAX_DMA_DESC_SIZE - hc->max_packet + 1;
++
++			if (hc->ep_is_in) {
++				if (len > 0) {
++					num_packets = (len + hc->max_packet - 1) / hc->max_packet;
++				} else {
++					/* Need 1 packet for transfer length of 0. */
++					num_packets = 1;
++				}
++				/* Always program an integral # of max packets for IN transfers. */
++				len = num_packets * hc->max_packet;
++			}
++
++			dma_desc->status.b.n_bytes = len;
++
++			qh->n_bytes[n_desc] = len;
++
++			if ((qh->ep_type == UE_CONTROL)
++			    && (qtd->control_phase == DWC_OTG_CONTROL_SETUP))
++				dma_desc->status.b.sup = 1;	/* Setup Packet */
++
++			dma_desc->status.b.a = 1;	/* Active descriptor */
++			dma_desc->status.b.sts = 0;
++
++			dma_desc->buf =
++			    ((unsigned long)hc->xfer_buff & 0xffffffff);
++
++			/*
++			 * Last descriptor(or single) of IN transfer
++			 * with actual size less than MaxPacket.
++			 */
++			if (len > hc->xfer_len) {
++				hc->xfer_len = 0;
++			} else {
++				hc->xfer_buff += len;
++				hc->xfer_len -= len;
++			}
++
++			qtd->n_desc++;
++			n_desc++;
++		}
++		while ((hc->xfer_len > 0) && (n_desc != MAX_DMA_DESC_NUM_GENERIC));
++
++
++		qtd->in_process = 1;
++
++		if (qh->ep_type == UE_CONTROL)
++			break;
++
++		if (n_desc == MAX_DMA_DESC_NUM_GENERIC)
++			break;
++	}
++
++	if (n_desc) {
++		/* Request Transfer Complete interrupt for the last descriptor */
++		qh->desc_list[n_desc - 1].status.b.ioc = 1;
++		/* End of List indicator */
++		qh->desc_list[n_desc - 1].status.b.eol = 1;
++
++		hc->ntd = n_desc;
++	}
++}
++
++/**
++ * For Control and Bulk endpoints initializes descriptor list
++ * and starts the transfer.
++ *
++ * For Interrupt and Isochronous endpoints initializes descriptor list
++ * then updates FrameList, marking appropriate entries as active.
++ * In case of Isochronous, the starting descriptor index is calculated based
++ * on the scheduled frame, but only on the first transfer descriptor within a session.
++ * Then starts the transfer via enabling the channel.
++ * For Isochronous endpoint the channel is not halted on XferComplete
++ * interrupt so remains assigned to the endpoint(QH) until session is done.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh The QH to init.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++void dwc_otg_hcd_start_xfer_ddma(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	/* Channel is already assigned */
++	dwc_hc_t *hc = qh->channel;
++	uint8_t skip_frames = 0;
++
++	switch (hc->ep_type) {
++	case DWC_OTG_EP_TYPE_CONTROL:
++	case DWC_OTG_EP_TYPE_BULK:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_INTR:
++		init_non_isoc_dma_desc(hcd, qh);
++
++		update_frame_list(hcd, qh, 1);
++
++		dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		break;
++	case DWC_OTG_EP_TYPE_ISOC:
++
++		if (!qh->ntd)
++			skip_frames = recalc_initial_desc_idx(hcd, qh);
++
++		init_isoc_dma_desc(hcd, qh, skip_frames);
++
++		if (!hc->xfer_started) {
++
++			update_frame_list(hcd, qh, 1);
++
++			/*
++			 * Always set to max, instead of actual size.
++			 * Otherwise ntd will be changed with
++			 * channel being enabled. Not recommended.
++			 *
++			 */
++			hc->ntd = max_desc_num(qh);
++			/* Enable channel only once for ISOC */
++			dwc_otg_hc_start_transfer_ddma(hcd->core_if, hc);
++		}
++
++		break;
++	default:
++
++		break;
++	}
++}
++
++static void complete_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint16_t idx, remain;
++	uint8_t urb_compl;
++
++	qh = hc->qh;
++	idx = qh->td_first;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry)
++		    qtd->in_process = 0;
++		return;
++	} else if ((halt_status == DWC_OTG_HC_XFER_AHB_ERR) ||
++		   (halt_status == DWC_OTG_HC_XFER_BABBLE_ERR)) {
++		/*
++		 * Channel is halted in these error cases.
++		 * Considered as serious issues.
++		 * Complete all URBs marking all frames as failed,
++		 * irrespective whether some of the descriptors(frames) succeeded or no.
++		 * Pass error code to completion routine as well, to
++		 * update urb->status, some of class drivers might use it to stop
++		 * queing transfer requests.
++		 */
++		int err = (halt_status == DWC_OTG_HC_XFER_AHB_ERR)
++		    ? (-DWC_E_IO)
++		    : (-DWC_E_OVERFLOW);
++
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			for (idx = 0; idx < qtd->urb->packet_count; idx++) {
++				frame_desc = &qtd->urb->iso_descs[idx];
++				frame_desc->status = err;
++			}
++			hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, err);
++			dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++
++		if (!qtd->in_process)
++			break;
++
++		urb_compl = 0;
++
++		do {
++
++			dma_desc = &qh->desc_list[idx];
++
++			frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++			remain = hc->ep_is_in ? dma_desc->status.b_isoc.n_bytes : 0;
++
++			if (dma_desc->status.b_isoc.sts == DMA_DESC_STS_PKTERR) {
++				/*
++				 * XactError or, unable to complete all the transactions
++				 * in the scheduled micro-frame/frame,
++				 * both indicated by DMA_DESC_STS_PKTERR.
++				 */
++				qtd->urb->error_count++;
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = -DWC_E_PROTOCOL;
++			} else {
++				/* Success */
++
++				frame_desc->actual_length = qh->n_bytes[idx] - remain;
++				frame_desc->status = 0;
++			}
++
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				/*
++				 * urb->status is not used for isoc transfers here.
++				 * The individual frame_desc status are used instead.
++				 */
++
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				/*
++				 * This check is necessary because urb_dequeue can be called
++				 * from urb complete callback(sound driver example).
++				 * All pending URBs are dequeued there, so no need for
++				 * further processing.
++				 */
++				if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++					return;
++				}
++
++				urb_compl = 1;
++
++			}
++
++			qh->ntd--;
++
++			/* Stop if IOC requested descriptor reached */
++			if (dma_desc->status.b_isoc.ioc) {
++				idx = desclist_idx_inc(idx, qh->interval, hc->speed);
++				goto stop_scan;
++			}
++
++			idx = desclist_idx_inc(idx, qh->interval, hc->speed);
++
++			if (urb_compl)
++				break;
++		}
++		while (idx != qh->td_first);
++	}
++stop_scan:
++	qh->td_first = idx;
++}
++
++uint8_t update_non_isoc_urb_state_ddma(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_host_dma_desc_t * dma_desc,
++				       dwc_otg_halt_status_e halt_status,
++				       uint32_t n_bytes, uint8_t * xfer_done)
++{
++
++	uint16_t remain = hc->ep_is_in ? dma_desc->status.b.n_bytes : 0;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	if (halt_status == DWC_OTG_HC_XFER_AHB_ERR) {
++		urb->status = -DWC_E_IO;
++		return 1;
++	}
++	if (dma_desc->status.b.sts == DMA_DESC_STS_PKTERR) {
++		switch (halt_status) {
++		case DWC_OTG_HC_XFER_STALL:
++			urb->status = -DWC_E_PIPE;
++			break;
++		case DWC_OTG_HC_XFER_BABBLE_ERR:
++			urb->status = -DWC_E_OVERFLOW;
++			break;
++		case DWC_OTG_HC_XFER_XACT_ERR:
++			urb->status = -DWC_E_PROTOCOL;
++			break;
++		default:
++			DWC_ERROR("%s: Unhandled descriptor error status (%d)\n", __func__,
++				  halt_status);
++			break;
++		}
++		return 1;
++	}
++
++	if (dma_desc->status.b.a == 1) {
++		DWC_DEBUGPL(DBG_HCDV,
++			    "Active descriptor encountered on channel %d\n",
++			    hc->hc_num);
++		return 0;
++	}
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL) {
++		if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++			urb->actual_length += n_bytes - remain;
++			if (remain || urb->actual_length == urb->length) {
++				/*
++				 * For Control Data stage do not set urb->status=0 to prevent
++				 * URB callback. Set it when Status phase done. See below.
++				 */
++				*xfer_done = 1;
++			}
++
++		} else if (qtd->control_phase == DWC_OTG_CONTROL_STATUS) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++		/* No handling for SETUP stage */
++	} else {
++		/* BULK and INTR */
++		urb->actual_length += n_bytes - remain;
++		if (remain || urb->actual_length == urb->length) {
++			urb->status = 0;
++			*xfer_done = 1;
++		}
++	}
++
++	return 0;
++}
++
++static void complete_non_isoc_xfer_ddma(dwc_otg_hcd_t * hcd,
++					dwc_hc_t * hc,
++					dwc_otg_hc_regs_t * hc_regs,
++					dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = NULL;
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++	dwc_otg_qh_t *qh;
++	dwc_otg_host_dma_desc_t *dma_desc;
++	uint32_t n_bytes, n_desc, i;
++	uint8_t failed = 0, xfer_done;
++
++	n_desc = 0;
++
++	qh = hc->qh;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE) {
++		DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &hc->qh->qtd_list, qtd_list_entry) {
++			qtd->in_process = 0;
++		}
++		return;
++	}
++
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++
++		urb = qtd->urb;
++
++		n_bytes = 0;
++		xfer_done = 0;
++
++		for (i = 0; i < qtd->n_desc; i++) {
++			dma_desc = &qh->desc_list[n_desc];
++
++			n_bytes = qh->n_bytes[n_desc];
++
++			failed =
++			    update_non_isoc_urb_state_ddma(hcd, hc, qtd,
++							   dma_desc,
++							   halt_status, n_bytes,
++							   &xfer_done);
++
++			if (failed
++			    || (xfer_done
++				&& (urb->status != -DWC_E_IN_PROGRESS))) {
++
++				hcd->fops->complete(hcd, urb->priv, urb,
++						    urb->status);
++				dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++
++				if (failed)
++					goto stop_scan;
++			} else if (qh->ep_type == UE_CONTROL) {
++				if (qtd->control_phase == DWC_OTG_CONTROL_SETUP) {
++					if (urb->length > 0) {
++						qtd->control_phase = DWC_OTG_CONTROL_DATA;
++					} else {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++					}
++					DWC_DEBUGPL(DBG_HCDV, "  Control setup transaction done\n");
++				} else if (qtd->control_phase == DWC_OTG_CONTROL_DATA) {
++					if (xfer_done) {
++						qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++						DWC_DEBUGPL(DBG_HCDV, "  Control data transfer done\n");
++					} else if (i + 1 == qtd->n_desc) {
++						/*
++						 * Last descriptor for Control data stage which is
++						 * not completed yet.
++						 */
++						dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++					}
++				}
++			}
++
++			n_desc++;
++		}
++
++	}
++
++stop_scan:
++
++	if (qh->ep_type != UE_CONTROL) {
++		/*
++		 * Resetting the data toggle for bulk
++		 * and interrupt endpoints in case of stall. See handle_hc_stall_intr()
++		 */
++		if (halt_status == DWC_OTG_HC_XFER_STALL)
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		else
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++	}
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		hcint_data_t hcint;
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		if (hcint.b.nyet) {
++			/*
++			 * Got a NYET on the last transaction of the transfer. It
++			 * means that the endpoint should be in the PING state at the
++			 * beginning of the next transfer.
++			 */
++			qh->ping_state = 1;
++			clear_hc_int(hc_regs, nyet);
++		}
++
++	}
++
++}
++
++/**
++ * This function is called from interrupt handlers.
++ * Scans the descriptor list, updates URB's status and
++ * calls completion routine for the URB if it's done.
++ * Releases the channel to be used by other transfers.
++ * In case of Isochronous endpoint the channel is not halted until
++ * the end of the session, i.e. QTD list is empty.
++ * If periodic channel released the FrameList is updated accordingly.
++ *
++ * Calls transaction selection routines to activate pending transfers.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param hc Host channel, the transfer is completed on.
++ * @param hc_regs Host channel registers.
++ * @param halt_status Reason the channel is being halted,
++ *		      or just XferComplete for isochronous transfer
++ */
++void dwc_otg_hcd_complete_xfer_ddma(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_halt_status_e halt_status)
++{
++	uint8_t continue_isoc_xfer = 0;
++	dwc_otg_transaction_type_e tr_type;
++	dwc_otg_qh_t *qh = hc->qh;
++
++	if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++
++		complete_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		/* Release the channel if halted or session completed */
++		if (halt_status != DWC_OTG_HC_XFER_COMPLETE ||
++		    DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++
++			/* Halt the channel if session completed */
++			if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++				dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++			}
++
++			release_channel_ddma(hcd, qh);
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/* Keep in assigned schedule to continue transfer */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &qh->qh_list_entry);
++			continue_isoc_xfer = 1;
++
++		}
++		/** @todo Consider the case when period exceeds FrameList size.
++		 *  Frame Rollover interrupt should be used.
++		 */
++	} else {
++		/* Scan descriptor list to complete the URB(s), then release the channel */
++		complete_non_isoc_xfer_ddma(hcd, hc, hc_regs, halt_status);
++
++		release_channel_ddma(hcd, qh);
++		dwc_otg_hcd_qh_remove(hcd, qh);
++
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule on normal completion */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++
++	}
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE || continue_isoc_xfer) {
++		if (continue_isoc_xfer) {
++			if (tr_type == DWC_OTG_TRANSACTION_NONE) {
++				tr_type = DWC_OTG_TRANSACTION_PERIODIC;
++			} else if (tr_type == DWC_OTG_TRANSACTION_NON_PERIODIC) {
++				tr_type = DWC_OTG_TRANSACTION_ALL;
++			}
++		}
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+new file mode 100644
+index 0000000..4823167
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_if.h
+@@ -0,0 +1,412 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_if.h $
++ * $Revision: #12 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++#ifndef __DWC_HCD_IF_H__
++#define __DWC_HCD_IF_H__
++
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG HCD Core API.
++ */
++
++struct dwc_otg_hcd;
++typedef struct dwc_otg_hcd dwc_otg_hcd_t;
++
++struct dwc_otg_hcd_urb;
++typedef struct dwc_otg_hcd_urb dwc_otg_hcd_urb_t;
++
++/** @name HCD Function Driver Callbacks */
++/** @{ */
++
++/** This function is called whenever core switches to host mode. */
++typedef int (*dwc_otg_hcd_start_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** This function is called when device has been disconnected */
++typedef int (*dwc_otg_hcd_disconnect_cb_t) (dwc_otg_hcd_t * hcd);
++
++/** Wrapper provides this function to HCD to core, so it can get hub information to which device is connected */
++typedef int (*dwc_otg_hcd_hub_info_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						   void *urb_handle,
++						   uint32_t * hub_addr,
++						   uint32_t * port_addr);
++/** Via this function HCD core gets device speed */
++typedef int (*dwc_otg_hcd_speed_from_urb_cb_t) (dwc_otg_hcd_t * hcd,
++						void *urb_handle);
++
++/** This function is called when urb is completed */
++typedef int (*dwc_otg_hcd_complete_urb_cb_t) (dwc_otg_hcd_t * hcd,
++					      void *urb_handle,
++					      dwc_otg_hcd_urb_t * dwc_otg_urb,
++					      int32_t status);
++
++/** Via this function HCD core gets b_hnp_enable parameter */
++typedef int (*dwc_otg_hcd_get_b_hnp_enable) (dwc_otg_hcd_t * hcd);
++
++struct dwc_otg_hcd_function_ops {
++	dwc_otg_hcd_start_cb_t start;
++	dwc_otg_hcd_disconnect_cb_t disconnect;
++	dwc_otg_hcd_hub_info_from_urb_cb_t hub_info;
++	dwc_otg_hcd_speed_from_urb_cb_t speed;
++	dwc_otg_hcd_complete_urb_cb_t complete;
++	dwc_otg_hcd_get_b_hnp_enable get_b_hnp_enable;
++};
++/** @} */
++
++/** @name HCD Core API */
++/** @{ */
++/** This function allocates dwc_otg_hcd structure and returns pointer on it. */
++extern dwc_otg_hcd_t *dwc_otg_hcd_alloc_hcd(void);
++
++/** This function should be called to initiate HCD Core.
++ *
++ * @param hcd The HCD
++ * @param core_if The DWC_OTG Core
++ *
++ * Returns -DWC_E_NO_MEMORY if no enough memory.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_init(dwc_otg_hcd_t * hcd, dwc_otg_core_if_t * core_if);
++
++/** Frees HCD
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_remove(dwc_otg_hcd_t * hcd);
++
++/** This function should be called on every hardware interrupt.
++ *
++ * @param dwc_otg_hcd The HCD
++ *
++ * Returns non zero if interrupt is handled
++ * Return 0 if interrupt is not handled
++ */
++extern int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd);
++
++/**
++ * Returns private data set by
++ * dwc_otg_hcd_set_priv_data function.
++ *
++ * @param hcd The HCD
++ */
++extern void *dwc_otg_hcd_get_priv_data(dwc_otg_hcd_t * hcd);
++
++/**
++ * Set private data.
++ *
++ * @param hcd The HCD
++ * @param priv_data pointer to be stored in private data
++ */
++extern void dwc_otg_hcd_set_priv_data(dwc_otg_hcd_t * hcd, void *priv_data);
++
++/**
++ * This function initializes the HCD Core.
++ *
++ * @param hcd The HCD
++ * @param fops The Function Driver Operations data structure containing pointers to all callbacks.
++ *
++ * Returns -DWC_E_NO_DEVICE if Core is currently is in device mode.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_start(dwc_otg_hcd_t * hcd,
++			     struct dwc_otg_hcd_function_ops *fops);
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_stop(dwc_otg_hcd_t * hcd);
++
++/**
++ * Handles hub class-specific requests.
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param typeReq Request Type
++ * @param wValue wValue from control request
++ * @param wIndex wIndex from control request
++ * @param buf data buffer
++ * @param wLength data buffer length
++ *
++ * Returns -DWC_E_INVALID if invalid argument is passed
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_hub_control(dwc_otg_hcd_t * dwc_otg_hcd,
++				   uint16_t typeReq, uint16_t wValue,
++				   uint16_t wIndex, uint8_t * buf,
++				   uint16_t wLength);
++
++/**
++ * Returns otg port number.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_otg_port(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns OTG version - either 1.3 or 2.0.
++ *
++ * @param core_if The core_if structure pointer
++ */
++extern uint16_t dwc_otg_get_otg_version(dwc_otg_core_if_t * core_if);
++
++/**
++ * Returns 1 if currently core is acting as B host, and 0 otherwise.
++ *
++ * @param hcd The HCD
++ */
++extern uint32_t dwc_otg_hcd_is_b_host(dwc_otg_hcd_t * hcd);
++
++/**
++ * Returns current frame number.
++ *
++ * @param hcd The HCD
++ */
++extern int dwc_otg_hcd_get_frame_number(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dumps hcd state.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_state(dwc_otg_hcd_t * hcd);
++
++/**
++ * Dump the average frame remaining at SOF. This can be used to
++ * determine average interrupt latency. Frame remaining is also shown for
++ * start transfer and two additional sample points.
++ * Currently this function is not implemented.
++ *
++ * @param hcd The HCD
++ */
++extern void dwc_otg_hcd_dump_frrem(dwc_otg_hcd_t * hcd);
++
++/**
++ * Sends LPM transaction to the local device.
++ *
++ * @param hcd The HCD
++ * @param devaddr Device Address
++ * @param hird Host initiated resume duration
++ * @param bRemoteWake Value of bRemoteWake field in LPM transaction
++ *
++ * Returns negative value if sending LPM transaction was not succeeded.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_send_lpm(dwc_otg_hcd_t * hcd, uint8_t devaddr,
++				uint8_t hird, uint8_t bRemoteWake);
++
++/* URB interface */
++
++/**
++ * Allocates memory for dwc_otg_hcd_urb structure.
++ * Allocated memory should be freed by call of DWC_FREE.
++ *
++ * @param hcd The HCD
++ * @param iso_desc_count Count of ISOC descriptors
++ * @param atomic_alloc Specefies whether to perform atomic allocation.
++ */
++extern dwc_otg_hcd_urb_t *dwc_otg_hcd_urb_alloc(dwc_otg_hcd_t * hcd,
++						int iso_desc_count,
++						int atomic_alloc);
++
++/**
++ * Set pipe information in URB.
++ *
++ * @param hcd_urb DWC_OTG URB
++ * @param devaddr Device Address
++ * @param ep_num Endpoint Number
++ * @param ep_type Endpoint Type
++ * @param ep_dir Endpoint Direction
++ * @param mps Max Packet Size
++ */
++extern void dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_hcd_urb_t * hcd_urb,
++					 uint8_t devaddr, uint8_t ep_num,
++					 uint8_t ep_type, uint8_t ep_dir,
++					 uint16_t mps);
++
++/* Transfer flags */
++#define URB_GIVEBACK_ASAP 0x1
++#define URB_SEND_ZERO_PACKET 0x2
++
++/**
++ * Sets dwc_otg_hcd_urb parameters.
++ *
++ * @param urb DWC_OTG URB allocated by dwc_otg_hcd_urb_alloc function.
++ * @param urb_handle Unique handle for request, this will be passed back
++ * to function driver in completion callback.
++ * @param buf The buffer for the data
++ * @param dma The DMA buffer for the data
++ * @param buflen Transfer length
++ * @param sp Buffer for setup data
++ * @param sp_dma DMA address of setup data buffer
++ * @param flags Transfer flags
++ * @param interval Polling interval for interrupt or isochronous transfers.
++ */
++extern void dwc_otg_hcd_urb_set_params(dwc_otg_hcd_urb_t * urb,
++				       void *urb_handle, void *buf,
++				       dwc_dma_t dma, uint32_t buflen, void *sp,
++				       dwc_dma_t sp_dma, uint32_t flags,
++				       uint16_t interval);
++
++/** Gets status from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_status(dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Gets actual length from dwc_otg_hcd_urb
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_actual_length(dwc_otg_hcd_urb_t *
++						  dwc_otg_urb);
++
++/** Gets error count from dwc_otg_hcd_urb. Only for ISOC URBs
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern uint32_t dwc_otg_hcd_urb_get_error_count(dwc_otg_hcd_urb_t *
++						dwc_otg_urb);
++
++/** Set ISOC descriptor offset and length
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ * @param offset Offset from beginig of buffer.
++ * @param length Transaction length
++ */
++extern void dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_hcd_urb_t * dwc_otg_urb,
++						int desc_num, uint32_t offset,
++						uint32_t length);
++
++/** Get status of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_hcd_urb_t *
++						    dwc_otg_urb, int desc_num);
++
++/** Get actual length of ISOC descriptor, specified by desc_num
++ *
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param desc_num ISOC descriptor number
++ */
++extern uint32_t dwc_otg_hcd_urb_get_iso_desc_actual_length(dwc_otg_hcd_urb_t *
++							   dwc_otg_urb,
++							   int desc_num);
++
++/** Queue URB. After transfer is completes, the complete callback will be called with the URB status
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ * @param ep_handle Out parameter for returning endpoint handle
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * Returns -DWC_E_NO_DEVICE if no device is connected.
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns 0 on success.
++ */
++extern int dwc_otg_hcd_urb_enqueue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb,
++				   void **ep_handle, int atomic_alloc);
++
++/** De-queue the specified URB
++ *
++ * @param dwc_otg_hcd The HCD
++ * @param dwc_otg_urb DWC_OTG URB
++ */
++extern int dwc_otg_hcd_urb_dequeue(dwc_otg_hcd_t * dwc_otg_hcd,
++				   dwc_otg_hcd_urb_t * dwc_otg_urb);
++
++/** Frees resources in the DWC_otg controller related to a given endpoint.
++ * Any URBs for the endpoint must already be dequeued.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ * @param retry Number of retries if there are queued transfers.
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_disable(dwc_otg_hcd_t * hcd, void *ep_handle,
++					int retry);
++
++/* Resets the data toggle in qh structure. This function can be called from
++ * usb_clear_halt routine.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle, returned by dwc_otg_hcd_urb_enqueue function
++ *
++ * Returns -DWC_E_INVALID if invalid arguments are passed.
++ * Returns 0 on success
++ */
++extern int dwc_otg_hcd_endpoint_reset(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns 1 if status of specified port is changed and 0 otherwise.
++ *
++ * @param hcd The HCD
++ * @param port Port number
++ */
++extern int dwc_otg_hcd_is_status_changed(dwc_otg_hcd_t * hcd, int port);
++
++/** Call this function to check if bandwidth was allocated for specified endpoint.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_allocated(dwc_otg_hcd_t * hcd,
++					      void *ep_handle);
++
++/** Call this function to check if bandwidth was freed for specified endpoint.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern int dwc_otg_hcd_is_bandwidth_freed(dwc_otg_hcd_t * hcd, void *ep_handle);
++
++/** Returns bandwidth allocated for specified endpoint in microseconds.
++ * Only for ISOC and INTERRUPT endpoints.
++ *
++ * @param hcd The HCD
++ * @param ep_handle Endpoint handle
++ */
++extern uint8_t dwc_otg_hcd_get_ep_bandwidth(dwc_otg_hcd_t * hcd,
++					    void *ep_handle);
++
++/** @} */
++
++#endif /* __DWC_HCD_IF_H__ */
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+new file mode 100644
+index 0000000..b41e164
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_intr.c
+@@ -0,0 +1,2106 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_intr.c $
++ * $Revision: #89 $
++ * $Date: 2011/10/20 $
++ * $Change: 1869487 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++/** @file
++ * This file contains the implementation of the HCD Interrupt handlers.
++ */
++
++/** This function handles interrupts for the HCD. */
++int32_t dwc_otg_hcd_handle_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++
++	dwc_otg_core_if_t *core_if = dwc_otg_hcd->core_if;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++
++        //GRAYG: debugging
++        if (NULL == global_regs) {
++                DWC_DEBUGPL(DBG_HCD, "**** NULL regs: dwc_otg_hcd=%p "
++                            "core_if=%p\n",
++                            dwc_otg_hcd, global_regs);
++                return retval;
++        }
++#endif
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		return retval;
++	}
++	DWC_SPINLOCK(dwc_otg_hcd->lock);
++	/* Check if HOST Mode */
++	if (dwc_otg_is_host_mode(core_if)) {
++		gintsts.d32 = dwc_otg_read_core_intr(core_if);
++		if (!gintsts.d32) {
++			DWC_SPINUNLOCK(dwc_otg_hcd->lock);
++			return 0;
++		}
++#ifdef DEBUG
++		/* Don't print debug message in the interrupt handler on SOF */
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Interrupt Detected gintsts&gintmsk=0x%08x core_if=%p\n",
++				    gintsts.d32, core_if);
++#endif
++
++		if (gintsts.b.sofintr) {
++			retval |= dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_hcd_handle_rx_status_q_level_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.nptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_np_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++		if (gintsts.b.i2cintr) {
++			/** @todo Implement i2cintr handler. */
++		}
++		if (gintsts.b.portintr) {
++			retval |= dwc_otg_hcd_handle_port_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.hcintr) {
++			retval |= dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd);
++		}
++		if (gintsts.b.ptxfempty) {
++			retval |=
++			    dwc_otg_hcd_handle_perio_tx_fifo_empty_intr
++			    (dwc_otg_hcd);
++		}
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++		{
++			DWC_DEBUGPL(DBG_HCDI,
++				    "DWC OTG HCD Finished Servicing Interrupts\n");
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintsts=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintsts));
++			DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD gintmsk=0x%08x\n",
++				    DWC_READ_REG32(&global_regs->gintmsk));
++		}
++#endif
++
++#ifdef DEBUG
++#ifndef DEBUG_SOF
++		if (gintsts.d32 != DWC_SOF_INTR_MASK)
++#endif
++			DWC_DEBUGPL(DBG_HCDI, "\n");
++#endif
++
++	}
++	DWC_SPINUNLOCK(dwc_otg_hcd->lock);
++	return retval;
++}
++
++#ifdef DWC_TRACK_MISSED_SOFS
++#warning Compiling code to track missed SOFs
++#define FRAME_NUM_ARRAY_SIZE 1000
++/**
++ * This function is for debug only.
++ */
++static inline void track_missed_sofs(uint16_t curr_frame_number)
++{
++	static uint16_t frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static uint16_t last_frame_num_array[FRAME_NUM_ARRAY_SIZE];
++	static int frame_num_idx = 0;
++	static uint16_t last_frame_num = DWC_HFNUM_MAX_FRNUM;
++	static int dumped_frame_num_array = 0;
++
++	if (frame_num_idx < FRAME_NUM_ARRAY_SIZE) {
++		if (((last_frame_num + 1) & DWC_HFNUM_MAX_FRNUM) !=
++		    curr_frame_number) {
++			frame_num_array[frame_num_idx] = curr_frame_number;
++			last_frame_num_array[frame_num_idx++] = last_frame_num;
++		}
++	} else if (!dumped_frame_num_array) {
++		int i;
++		DWC_PRINTF("Frame     Last Frame\n");
++		DWC_PRINTF("-----     ----------\n");
++		for (i = 0; i < FRAME_NUM_ARRAY_SIZE; i++) {
++			DWC_PRINTF("0x%04x    0x%04x\n",
++				   frame_num_array[i], last_frame_num_array[i]);
++		}
++		dumped_frame_num_array = 1;
++	}
++	last_frame_num = curr_frame_number;
++}
++#endif
++
++/**
++ * Handles the start-of-frame interrupt in host mode. Non-periodic
++ * transactions may be queued to the DWC_otg controller for the current
++ * (micro)frame. Periodic transactions may be queued to the controller for the
++ * next (micro)frame.
++ */
++int32_t dwc_otg_hcd_handle_sof_intr(dwc_otg_hcd_t * hcd)
++{
++	hfnum_data_t hfnum;
++	dwc_list_link_t *qh_entry;
++	dwc_otg_qh_t *qh;
++	dwc_otg_transaction_type_e tr_type;
++	gintsts_data_t gintsts = {.d32 = 0 };
++
++	hfnum.d32 =
++	    DWC_READ_REG32(&hcd->core_if->host_if->host_global_regs->hfnum);
++
++#ifdef DEBUG_SOF
++	DWC_DEBUGPL(DBG_HCD, "--Start of Frame Interrupt--\n");
++#endif
++	hcd->frame_number = hfnum.b.frnum;
++
++#ifdef DEBUG
++	hcd->frrem_accum += hfnum.b.frrem;
++	hcd->frrem_samples++;
++#endif
++
++#ifdef DWC_TRACK_MISSED_SOFS
++	track_missed_sofs(hcd->frame_number);
++#endif
++	/* Determine whether any periodic QHs should be executed. */
++	qh_entry = DWC_LIST_FIRST(&hcd->periodic_sched_inactive);
++	while (qh_entry != &hcd->periodic_sched_inactive) {
++		qh = DWC_LIST_ENTRY(qh_entry, dwc_otg_qh_t, qh_list_entry);
++		qh_entry = qh_entry->next;
++		if (dwc_frame_num_le(qh->sched_frame, hcd->frame_number)) {
++			/*
++			 * Move QH to the ready list to be executed next
++			 * (micro)frame.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++					   &qh->qh_list_entry);
++		}
++	}
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++
++	/* Clear interrupt */
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&hcd->core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/** Handles the Rx Status Queue Level Interrupt, which indicates that there is at
++ * least one packet in the Rx FIFO.  The packets are moved from the FIFO to
++ * memory if the DWC_otg controller is operating in Slave mode. */
++int32_t dwc_otg_hcd_handle_rx_status_q_level_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	host_grxsts_data_t grxsts;
++	dwc_hc_t *hc = NULL;
++
++	DWC_DEBUGPL(DBG_HCD, "--RxStsQ Level Interrupt--\n");
++
++	grxsts.d32 =
++	    DWC_READ_REG32(&dwc_otg_hcd->core_if->core_global_regs->grxstsp);
++
++	hc = dwc_otg_hcd->hc_ptr_array[grxsts.b.chnum];
++	if (!hc) {
++		DWC_ERROR("Unable to get corresponding channel\n");
++		return 0;
++	}
++
++	/* Packet Status */
++	DWC_DEBUGPL(DBG_HCDV, "    Ch num = %d\n", grxsts.b.chnum);
++	DWC_DEBUGPL(DBG_HCDV, "    Count = %d\n", grxsts.b.bcnt);
++	DWC_DEBUGPL(DBG_HCDV, "    DPID = %d, hc.dpid = %d\n", grxsts.b.dpid,
++		    hc->data_pid_start);
++	DWC_DEBUGPL(DBG_HCDV, "    PStatus = %d\n", grxsts.b.pktsts);
++
++	switch (grxsts.b.pktsts) {
++	case DWC_GRXSTS_PKTSTS_IN:
++		/* Read the data into the host buffer. */
++		if (grxsts.b.bcnt > 0) {
++			dwc_otg_read_packet(dwc_otg_hcd->core_if,
++					    hc->xfer_buff, grxsts.b.bcnt);
++
++			/* Update the HC fields for the next packet received. */
++			hc->xfer_count += grxsts.b.bcnt;
++			hc->xfer_buff += grxsts.b.bcnt;
++		}
++
++	case DWC_GRXSTS_PKTSTS_IN_XFER_COMP:
++	case DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR:
++	case DWC_GRXSTS_PKTSTS_CH_HALTED:
++		/* Handled in interrupt, just ignore data */
++		break;
++	default:
++		DWC_ERROR("RX_STS_Q Interrupt: Unknown status %d\n",
++			  grxsts.b.pktsts);
++		break;
++	}
++
++	return 1;
++}
++
++/** This interrupt occurs when the non-periodic Tx FIFO is half-empty. More
++ * data packets may be written to the FIFO for OUT transfers. More requests
++ * may be written to the non-periodic request queue for IN transfers. This
++ * interrupt is enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_np_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Non-Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_NON_PERIODIC);
++	return 1;
++}
++
++/** This interrupt occurs when the periodic Tx FIFO is half-empty. More data
++ * packets may be written to the FIFO for OUT transfers. More requests may be
++ * written to the periodic request queue for IN transfers. This interrupt is
++ * enabled only in Slave mode. */
++int32_t dwc_otg_hcd_handle_perio_tx_fifo_empty_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	DWC_DEBUGPL(DBG_HCD, "--Periodic TxFIFO Empty Interrupt--\n");
++	dwc_otg_hcd_queue_transactions(dwc_otg_hcd,
++				       DWC_OTG_TRANSACTION_PERIODIC);
++	return 1;
++}
++
++/** There are multiple conditions that can cause a port interrupt. This function
++ * determines which interrupt conditions have occurred and handles them
++ * appropriately. */
++int32_t dwc_otg_hcd_handle_port_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int retval = 0;
++	hprt0_data_t hprt0;
++	hprt0_data_t hprt0_modify;
++
++	hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++	hprt0_modify.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++
++	/* Clear appropriate bits in HPRT0 to clear the interrupt bit in
++	 * GINTSTS */
++
++	hprt0_modify.b.prtena = 0;
++	hprt0_modify.b.prtconndet = 0;
++	hprt0_modify.b.prtenchng = 0;
++	hprt0_modify.b.prtovrcurrchng = 0;
++
++	/* Port Connect Detected
++	 * Set flag and clear if detected */
++	if (dwc_otg_hcd->core_if->hibernation_suspend == 1) {
++		// Dont modify port status if we are in hibernation state
++		hprt0_modify.b.prtconndet = 1;
++		hprt0_modify.b.prtenchng = 1;
++		DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++		hprt0.d32 = DWC_READ_REG32(dwc_otg_hcd->core_if->host_if->hprt0);
++		return retval;
++	}
++
++	if (hprt0.b.prtconndet) {
++		/** @todo - check if steps performed in 'else' block should be perfromed regardles adp */
++		if (dwc_otg_hcd->core_if->adp_enable &&
++				dwc_otg_hcd->core_if->adp.vbuson_timer_started == 1) {
++			DWC_PRINTF("PORT CONNECT DETECTED ----------------\n");
++			DWC_TIMER_CANCEL(dwc_otg_hcd->core_if->adp.vbuson_timer);
++			dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			/* TODO - check if this is required, as
++			 * host initialization was already performed
++			 * after initial ADP probing
++			 */
++			/*dwc_otg_hcd->core_if->adp.vbuson_timer_started = 0;
++			dwc_otg_core_init(dwc_otg_hcd->core_if);
++			dwc_otg_enable_global_interrupts(dwc_otg_hcd->core_if);
++			cil_hcd_start(dwc_otg_hcd->core_if);*/
++		} else {
++
++			DWC_DEBUGPL(DBG_HCD, "--Port Interrupt HPRT0=0x%08x "
++				    "Port Connect Detected--\n", hprt0.d32);
++			dwc_otg_hcd->flags.b.port_connect_status_change = 1;
++			dwc_otg_hcd->flags.b.port_connect_status = 1;
++			hprt0_modify.b.prtconndet = 1;
++
++			/* B-Device has connected, Delete the connection timer. */
++			DWC_TIMER_CANCEL(dwc_otg_hcd->conn_timer);
++		}
++		/* The Hub driver asserts a reset when it sees port connect
++		 * status change flag */
++		retval |= 1;
++	}
++
++	/* Port Enable Changed
++	 * Clear if detected - Set internal flag if disabled */
++	if (hprt0.b.prtenchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Enable Changed--\n", hprt0.d32);
++		hprt0_modify.b.prtenchng = 1;
++		if (hprt0.b.prtena == 1) {
++			hfir_data_t hfir;
++			int do_reset = 0;
++			dwc_otg_core_params_t *params =
++			    dwc_otg_hcd->core_if->core_params;
++			dwc_otg_core_global_regs_t *global_regs =
++			    dwc_otg_hcd->core_if->core_global_regs;
++			dwc_otg_host_if_t *host_if =
++			    dwc_otg_hcd->core_if->host_if;
++
++			/* Every time when port enables calculate
++			 * HFIR.FrInterval
++			 */
++			hfir.d32 = DWC_READ_REG32(&host_if->host_global_regs->hfir);
++			hfir.b.frint = calc_frame_interval(dwc_otg_hcd->core_if);
++			DWC_WRITE_REG32(&host_if->host_global_regs->hfir, hfir.d32);
++
++			/* Check if we need to adjust the PHY clock speed for
++			 * low power and adjust it */
++			if (params->host_support_fs_ls_low_power) {
++				gusbcfg_data_t usbcfg;
++
++				usbcfg.d32 =
++				    DWC_READ_REG32(&global_regs->gusbcfg);
++
++				if (hprt0.b.prtspd == DWC_HPRT0_PRTSPD_LOW_SPEED
++				    || hprt0.b.prtspd ==
++				    DWC_HPRT0_PRTSPD_FULL_SPEED) {
++					/*
++					 * Low power
++					 */
++					hcfg_data_t hcfg;
++					if (usbcfg.b.phylpwrclksel == 0) {
++						/* Set PHY low power clock select for FS/LS devices */
++						usbcfg.b.phylpwrclksel = 1;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++
++					hcfg.d32 =
++					    DWC_READ_REG32
++					    (&host_if->host_global_regs->hcfg);
++
++					if (hprt0.b.prtspd ==
++					    DWC_HPRT0_PRTSPD_LOW_SPEED
++					    && params->host_ls_low_power_phy_clk
++					    ==
++					    DWC_HOST_LS_LOW_POWER_PHY_CLK_PARAM_6MHZ)
++					{
++						/* 6 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 6 MHz (Low Power)\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_6_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_6_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					} else {
++						/* 48 MHZ */
++						DWC_DEBUGPL(DBG_CIL,
++							    "FS_PHY programming HCFG to 48 MHz ()\n");
++						if (hcfg.b.fslspclksel !=
++						    DWC_HCFG_48_MHZ) {
++							hcfg.b.fslspclksel =
++							    DWC_HCFG_48_MHZ;
++							DWC_WRITE_REG32
++							    (&host_if->host_global_regs->hcfg,
++							     hcfg.d32);
++							do_reset = 1;
++						}
++					}
++				} else {
++					/*
++					 * Not low power
++					 */
++					if (usbcfg.b.phylpwrclksel == 1) {
++						usbcfg.b.phylpwrclksel = 0;
++						DWC_WRITE_REG32
++						    (&global_regs->gusbcfg,
++						     usbcfg.d32);
++						do_reset = 1;
++					}
++				}
++
++				if (do_reset) {
++					DWC_TASK_SCHEDULE(dwc_otg_hcd->reset_tasklet);
++				}
++			}
++
++			if (!do_reset) {
++				/* Port has been enabled set the reset change flag */
++				dwc_otg_hcd->flags.b.port_reset_change = 1;
++			}
++		} else {
++			dwc_otg_hcd->flags.b.port_enable_change = 1;
++		}
++		retval |= 1;
++	}
++
++	/** Overcurrent Change Interrupt */
++	if (hprt0.b.prtovrcurrchng) {
++		DWC_DEBUGPL(DBG_HCD, "  --Port Interrupt HPRT0=0x%08x "
++			    "Port Overcurrent Changed--\n", hprt0.d32);
++		dwc_otg_hcd->flags.b.port_over_current_change = 1;
++		hprt0_modify.b.prtovrcurrchng = 1;
++		retval |= 1;
++	}
++
++	/* Clear Port Interrupts */
++	DWC_WRITE_REG32(dwc_otg_hcd->core_if->host_if->hprt0, hprt0_modify.d32);
++
++	return retval;
++}
++
++/** This interrupt indicates that one or more host channels has a pending
++ * interrupt. There are multiple conditions that can cause each host channel
++ * interrupt. This function determines which conditions have occurred for each
++ * host channel interrupt and handles them appropriately. */
++int32_t dwc_otg_hcd_handle_hc_intr(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	int i;
++	int retval = 0;
++	haint_data_t haint;
++
++	/* Clear appropriate bits in HCINTn to clear the interrupt bit in
++	 * GINTSTS */
++
++	haint.d32 = dwc_otg_read_host_all_channels_intr(dwc_otg_hcd->core_if);
++
++	for (i = 0; i < dwc_otg_hcd->core_if->core_params->host_channels; i++) {
++		if (haint.b2.chint & (1 << i)) {
++			retval |= dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd, i);
++		}
++	}
++
++	return retval;
++}
++
++/**
++ * Gets the actual length of a transfer after the transfer halts. _halt_status
++ * holds the reason for the halt.
++ *
++ * For IN transfers where halt_status is DWC_OTG_HC_XFER_COMPLETE,
++ * *short_read is set to 1 upon return if less than the requested
++ * number of bytes were transferred. Otherwise, *short_read is set to 0 upon
++ * return. short_read may also be NULL on entry, in which case it remains
++ * unchanged.
++ */
++static uint32_t get_actual_xfer_length(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status,
++				       int *short_read)
++{
++	hctsiz_data_t hctsiz;
++	uint32_t length;
++
++	if (short_read != NULL) {
++		*short_read = 0;
++	}
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (halt_status == DWC_OTG_HC_XFER_COMPLETE) {
++		if (hc->ep_is_in) {
++			length = hc->xfer_len - hctsiz.b.xfersize;
++			if (short_read != NULL) {
++				*short_read = (hctsiz.b.xfersize != 0);
++			}
++		} else if (hc->qh->do_split) {
++			length = qtd->ssplit_out_xfer_count;
++		} else {
++			length = hc->xfer_len;
++		}
++	} else {
++		/*
++		 * Must use the hctsiz.pktcnt field to determine how much data
++		 * has been transferred. This field reflects the number of
++		 * packets that have been transferred via the USB. This is
++		 * always an integral number of packets if the transfer was
++		 * halted before its normal completion. (Can't use the
++		 * hctsiz.xfersize field because that reflects the number of
++		 * bytes transferred via the AHB, not the USB).
++		 */
++		length =
++		    (hc->start_pkt_count - hctsiz.b.pktcnt) * hc->max_packet;
++	}
++
++	return length;
++}
++
++/**
++ * Updates the state of the URB after a Transfer Complete interrupt on the
++ * host channel. Updates the actual_length field of the URB based on the
++ * number of bytes transferred via the host channel. Sets the URB status
++ * if the data transfer is finished.
++ *
++ * @return 1 if the data transfer specified by the URB is completely finished,
++ * 0 otherwise.
++ */
++static int update_urb_state_xfer_comp(dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_hcd_urb_t * urb,
++				      dwc_otg_qtd_t * qtd)
++{
++	int xfer_done = 0;
++	int short_read = 0;
++
++	int xfer_length;
++
++	xfer_length = get_actual_xfer_length(hc, hc_regs, qtd,
++					     DWC_OTG_HC_XFER_COMPLETE,
++					     &short_read);
++
++
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && xfer_length && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   xfer_length);
++	}
++
++	urb->actual_length += xfer_length;
++
++	if (xfer_length && (hc->ep_type == DWC_OTG_EP_TYPE_BULK) &&
++	    (urb->flags & URB_SEND_ZERO_PACKET)
++	    && (urb->actual_length == urb->length)
++	    && !(urb->length % hc->max_packet)) {
++		xfer_done = 0;
++	} else if (short_read || urb->actual_length >= urb->length) {
++		xfer_done = 1;
++		urb->status = 0;
++	}
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->xfer_len %d\n", hc->xfer_len);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.xfersize %d\n",
++			    hctsiz.b.xfersize);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  short_read %d, xfer_done %d\n",
++			    short_read, xfer_done);
++	}
++#endif
++
++	return xfer_done;
++}
++
++/*
++ * Save the starting data toggle for the next transfer. The data toggle is
++ * saved in the QH for non-control transfers and it's saved in the QTD for
++ * control transfers.
++ */
++void dwc_otg_hcd_save_data_toggle(dwc_hc_t * hc,
++			     dwc_otg_hc_regs_t * hc_regs, dwc_otg_qtd_t * qtd)
++{
++	hctsiz_data_t hctsiz;
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_CONTROL) {
++		dwc_otg_qh_t *qh = hc->qh;
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qh->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	} else {
++		if (hctsiz.b.pid == DWC_HCTSIZ_DATA0) {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA0;
++		} else {
++			qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		}
++	}
++}
++
++/**
++ * Updates the state of an Isochronous URB when the transfer is stopped for
++ * any reason. The fields of the current entry in the frame descriptor array
++ * are set based on the transfer state and the input _halt_status. Completes
++ * the Isochronous URB if all the URB frames have been completed.
++ *
++ * @return DWC_OTG_HC_XFER_COMPLETE if there are more frames remaining to be
++ * transferred in the URB. Otherwise return DWC_OTG_HC_XFER_URB_COMPLETE.
++ */
++static dwc_otg_halt_status_e
++update_isoc_urb_state(dwc_otg_hcd_t * hcd,
++		      dwc_hc_t * hc,
++		      dwc_otg_hc_regs_t * hc_regs,
++		      dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	dwc_otg_halt_status_e ret_val = halt_status;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++
++	frame_desc = &urb->iso_descs[qtd->isoc_frame_index];
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_COMPLETE:
++		frame_desc->status = 0;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++
++		break;
++	case DWC_OTG_HC_XFER_FRAME_OVERRUN:
++		urb->error_count++;
++		if (hc->ep_is_in) {
++			frame_desc->status = -DWC_E_NO_STREAM_RES;
++		} else {
++			frame_desc->status = -DWC_E_COMMUNICATION;
++		}
++		frame_desc->actual_length = 0;
++		break;
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_OVERFLOW;
++		/* Don't need to update actual_length in this case. */
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		urb->error_count++;
++		frame_desc->status = -DWC_E_PROTOCOL;
++		frame_desc->actual_length =
++		    get_actual_xfer_length(hc, hc_regs, qtd, halt_status, NULL);
++
++		/* non DWORD-aligned buffer case handling. */
++		if (hc->align_buff && frame_desc->actual_length && hc->ep_is_in) {
++			dwc_memcpy(urb->buf + frame_desc->offset + qtd->isoc_split_offset,
++				   hc->qh->dw_align_buf, frame_desc->actual_length);
++		}
++		/* Skip whole frame */
++		if (hc->qh->do_split && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC) &&
++		    hc->ep_is_in && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++		}
++
++		break;
++	default:
++		DWC_ASSERT(1, "Unhandled _halt_status (%d)\n", halt_status);
++		break;
++	}
++	if (++qtd->isoc_frame_index == urb->packet_count) {
++		/*
++		 * urb->status is not used for isoc transfers.
++		 * The individual frame_desc statuses are used instead.
++		 */
++		hcd->fops->complete(hcd, urb->priv, urb, 0);
++		ret_val = DWC_OTG_HC_XFER_URB_COMPLETE;
++	} else {
++		ret_val = DWC_OTG_HC_XFER_COMPLETE;
++	}
++	return ret_val;
++}
++
++/**
++ * Frees the first QTD in the QH's list if free_qtd is 1. For non-periodic
++ * QHs, removes the QH from the active non-periodic schedule. If any QTDs are
++ * still linked to the QH, the QH is added to the end of the inactive
++ * non-periodic schedule. For periodic QHs, removes the QH from the periodic
++ * schedule if no more QTDs are linked to the QH.
++ */
++static void deactivate_qh(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, int free_qtd)
++{
++	int continue_split = 0;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s(%p,%p,%d)\n", __func__, hcd, qh, free_qtd);
++
++	qtd = DWC_CIRCLEQ_FIRST(&qh->qtd_list);
++
++	if (qtd->complete_split) {
++		continue_split = 1;
++	} else if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_MID ||
++		   qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_END) {
++		continue_split = 1;
++	}
++
++	if (free_qtd) {
++		dwc_otg_hcd_qtd_remove_and_free(hcd, qtd, qh);
++		continue_split = 0;
++	}
++
++	qh->channel = NULL;
++	dwc_otg_hcd_qh_deactivate(hcd, qh, continue_split);
++}
++
++/**
++ * Releases a host channel for use by other transfers. Attempts to select and
++ * queue more transactions since at least one host channel is available.
++ *
++ * @param hcd The HCD state structure.
++ * @param hc The host channel to release.
++ * @param qtd The QTD associated with the host channel. This QTD may be freed
++ * if the transfer is complete or an error has occurred.
++ * @param halt_status Reason the channel is being released. This status
++ * determines the actions taken by this function.
++ */
++static void release_channel(dwc_otg_hcd_t * hcd,
++			    dwc_hc_t * hc,
++			    dwc_otg_qtd_t * qtd,
++			    dwc_otg_halt_status_e halt_status)
++{
++	dwc_otg_transaction_type_e tr_type;
++	int free_qtd;
++	dwc_irqflags_t flags;
++	dwc_spinlock_t *channel_lock = DWC_SPINLOCK_ALLOC();
++
++	DWC_DEBUGPL(DBG_HCDV, "  %s: channel %d, halt_status %d, xfer_len %d\n",
++		    __func__, hc->hc_num, halt_status, hc->xfer_len);
++
++	switch (halt_status) {
++	case DWC_OTG_HC_XFER_URB_COMPLETE:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_AHB_ERR:
++	case DWC_OTG_HC_XFER_STALL:
++	case DWC_OTG_HC_XFER_BABBLE_ERR:
++		free_qtd = 1;
++		break;
++	case DWC_OTG_HC_XFER_XACT_ERR:
++		if (qtd->error_count >= 3) {
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Complete URB with transaction error\n");
++			free_qtd = 1;
++			qtd->urb->status = -DWC_E_PROTOCOL;
++			hcd->fops->complete(hcd, qtd->urb->priv,
++					    qtd->urb, -DWC_E_PROTOCOL);
++		} else {
++			free_qtd = 0;
++		}
++		break;
++	case DWC_OTG_HC_XFER_URB_DEQUEUE:
++		/*
++		 * The QTD has already been removed and the QH has been
++		 * deactivated. Don't want to do anything except release the
++		 * host channel and try to queue more transfers.
++		 */
++		goto cleanup;
++	case DWC_OTG_HC_XFER_NO_HALT_STATUS:
++		free_qtd = 0;
++		break;
++	case DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE:
++		DWC_DEBUGPL(DBG_HCDV,
++			"  Complete URB with I/O error\n");
++		free_qtd = 1;
++		qtd->urb->status = -DWC_E_IO;
++		hcd->fops->complete(hcd, qtd->urb->priv,
++			qtd->urb, -DWC_E_IO);
++		break;
++	default:
++		free_qtd = 0;
++		break;
++	}
++
++	deactivate_qh(hcd, hc->qh, free_qtd);
++
++cleanup:
++	/*
++	 * Release the host channel for use by other transfers. The cleanup
++	 * function clears the channel interrupt enables and conditions, so
++	 * there's no need to clear the Channel Halted interrupt separately.
++	 */
++	dwc_otg_hc_cleanup(hcd->core_if, hc);
++	DWC_CIRCLEQ_INSERT_TAIL(&hcd->free_hc_list, hc, hc_list_entry);
++
++	if (!microframe_schedule) {
++		switch (hc->ep_type) {
++		case DWC_OTG_EP_TYPE_CONTROL:
++		case DWC_OTG_EP_TYPE_BULK:
++			hcd->non_periodic_channels--;
++			break;
++
++		default:
++			/*
++			 * Don't release reservations for periodic channels here.
++			 * That's done when a periodic transfer is descheduled (i.e.
++			 * when the QH is removed from the periodic schedule).
++			 */
++			break;
++		}
++	} else {
++
++		DWC_SPINLOCK_IRQSAVE(channel_lock, &flags);
++		hcd->available_host_channels++;
++		DWC_SPINUNLOCK_IRQRESTORE(channel_lock, flags);
++	}
++
++	/* Try to queue more transfers now that there's a free channel. */
++	tr_type = dwc_otg_hcd_select_transactions(hcd);
++	if (tr_type != DWC_OTG_TRANSACTION_NONE) {
++		dwc_otg_hcd_queue_transactions(hcd, tr_type);
++	}
++	DWC_SPINLOCK_FREE(channel_lock);
++}
++
++/**
++ * Halts a host channel. If the channel cannot be halted immediately because
++ * the request queue is full, this function ensures that the FIFO empty
++ * interrupt for the appropriate queue is enabled so that the halt request can
++ * be queued when there is space in the request queue.
++ *
++ * This function may also be called in DMA mode. In that case, the channel is
++ * simply released since the core always halts the channel automatically in
++ * DMA mode.
++ */
++static void halt_channel(dwc_otg_hcd_t * hcd,
++			 dwc_hc_t * hc,
++			 dwc_otg_qtd_t * qtd, dwc_otg_halt_status_e halt_status)
++{
++	if (hcd->core_if->dma_enable) {
++		release_channel(hcd, hc, qtd, halt_status);
++		return;
++	}
++
++	/* Slave mode processing... */
++	dwc_otg_hc_halt(hcd->core_if, hc, halt_status);
++
++	if (hc->halt_on_queue) {
++		gintmsk_data_t gintmsk = {.d32 = 0 };
++		dwc_otg_core_global_regs_t *global_regs;
++		global_regs = hcd->core_if->core_global_regs;
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_BULK) {
++			/*
++			 * Make sure the Non-periodic Tx FIFO empty interrupt
++			 * is enabled so that the non-periodic schedule will
++			 * be processed.
++			 */
++			gintmsk.b.nptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		} else {
++			/*
++			 * Move the QH from the periodic queued schedule to
++			 * the periodic assigned schedule. This allows the
++			 * halt to be queued when the periodic schedule is
++			 * processed.
++			 */
++			DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_assigned,
++					   &hc->qh->qh_list_entry);
++
++			/*
++			 * Make sure the Periodic Tx FIFO Empty interrupt is
++			 * enabled so that the periodic schedule will be
++			 * processed.
++			 */
++			gintmsk.b.ptxfempty = 1;
++			DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmsk.d32);
++		}
++	}
++}
++
++/**
++ * Performs common cleanup for non-periodic transfers after a Transfer
++ * Complete interrupt. This function should be called after any endpoint type
++ * specific handling is finished to release the host channel.
++ */
++static void complete_non_periodic_xfer(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	hcint_data_t hcint;
++
++	qtd->error_count = 0;
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	if (hcint.b.nyet) {
++		/*
++		 * Got a NYET on the last transaction of the transfer. This
++		 * means that the endpoint should be in the PING state at the
++		 * beginning of the next transfer.
++		 */
++		hc->qh->ping_state = 1;
++		clear_hc_int(hc_regs, nyet);
++	}
++
++	/*
++	 * Always halt and release the host channel to make it available for
++	 * more transfers. There may still be more phases for a control
++	 * transfer or more data packets for a bulk transfer at this point,
++	 * but the host channel is still halted. A channel will be reassigned
++	 * to the transfer when the non-periodic schedule is processed after
++	 * the channel is released. This allows transactions to be queued
++	 * properly via dwc_otg_hcd_queue_transactions, which also enables the
++	 * Tx FIFO Empty interrupt if necessary.
++	 */
++	if (hc->ep_is_in) {
++		/*
++		 * IN transfers in Slave mode require an explicit disable to
++		 * halt the channel. (In DMA mode, this call simply releases
++		 * the channel.)
++		 */
++		halt_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/*
++		 * The channel is automatically disabled by the core for OUT
++		 * transfers in Slave mode.
++		 */
++		release_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++/**
++ * Performs common cleanup for periodic transfers after a Transfer Complete
++ * interrupt. This function should be called after any endpoint type specific
++ * handling is finished to release the host channel.
++ */
++static void complete_periodic_xfer(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd,
++				   dwc_otg_halt_status_e halt_status)
++{
++	hctsiz_data_t hctsiz;
++	qtd->error_count = 0;
++
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	if (!hc->ep_is_in || hctsiz.b.pktcnt == 0) {
++		/* Core halts channel in these cases. */
++		release_channel(hcd, hc, qtd, halt_status);
++	} else {
++		/* Flush any outstanding requests from the Tx queue. */
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++}
++
++static int32_t handle_xfercomp_isoc_split_in(dwc_otg_hcd_t * hcd,
++					     dwc_hc_t * hc,
++					     dwc_otg_hc_regs_t * hc_regs,
++					     dwc_otg_qtd_t * qtd)
++{
++	uint32_t len;
++	struct dwc_otg_hcd_iso_packet_desc *frame_desc;
++	frame_desc = &qtd->urb->iso_descs[qtd->isoc_frame_index];
++
++	len = get_actual_xfer_length(hc, hc_regs, qtd,
++				     DWC_OTG_HC_XFER_COMPLETE, NULL);
++
++	if (!len) {
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++		return 0;
++	}
++	frame_desc->actual_length += len;
++
++	if (hc->align_buff && len)
++		dwc_memcpy(qtd->urb->buf + frame_desc->offset +
++			   qtd->isoc_split_offset, hc->qh->dw_align_buf, len);
++	qtd->isoc_split_offset += len;
++
++	if (frame_desc->length == frame_desc->actual_length) {
++		frame_desc->status = 0;
++		qtd->isoc_frame_index++;
++		qtd->complete_split = 0;
++		qtd->isoc_split_offset = 0;
++	}
++
++	if (qtd->isoc_frame_index == qtd->urb->packet_count) {
++		hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
++	} else {
++		release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
++	}
++
++	return 1;		/* Indicates that channel released */
++}
++
++/**
++ * Handles a host channel Transfer Complete interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xfercomp_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	int urb_xfer_done;
++	dwc_otg_halt_status_e halt_status = DWC_OTG_HC_XFER_COMPLETE;
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transfer Complete--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, halt_status);
++		if (pipe_type == UE_ISOCHRONOUS) {
++			/* Do not disable the interrupt, just clear it */
++			clear_hc_int(hc_regs, xfercomp);
++			return 1;
++		}
++		goto handle_xfercomp_done;
++	}
++
++	/*
++	 * Handle xfer complete on CSPLIT.
++	 */
++
++	if (hc->qh->do_split) {
++		if ((hc->ep_type == DWC_OTG_EP_TYPE_ISOC) && hc->ep_is_in
++		    && hcd->core_if->dma_enable) {
++			if (qtd->complete_split
++			    && handle_xfercomp_isoc_split_in(hcd, hc, hc_regs,
++							     qtd))
++				goto handle_xfercomp_done;
++		} else {
++			qtd->complete_split = 0;
++		}
++	}
++
++	/* Update the QTD and URB states. */
++	switch (pipe_type) {
++	case UE_CONTROL:
++		switch (qtd->control_phase) {
++		case DWC_OTG_CONTROL_SETUP:
++			if (urb->length > 0) {
++				qtd->control_phase = DWC_OTG_CONTROL_DATA;
++			} else {
++				qtd->control_phase = DWC_OTG_CONTROL_STATUS;
++			}
++			DWC_DEBUGPL(DBG_HCDV,
++				    "  Control setup transaction done\n");
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++			break;
++		case DWC_OTG_CONTROL_DATA:{
++				urb_xfer_done =
++				    update_urb_state_xfer_comp(hc, hc_regs, urb,
++							       qtd);
++				if (urb_xfer_done) {
++					qtd->control_phase =
++					    DWC_OTG_CONTROL_STATUS;
++					DWC_DEBUGPL(DBG_HCDV,
++						    "  Control data transfer done\n");
++				} else {
++					dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++				}
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++				break;
++			}
++		case DWC_OTG_CONTROL_STATUS:
++			DWC_DEBUGPL(DBG_HCDV, "  Control transfer complete\n");
++			if (urb->status == -DWC_E_IN_PROGRESS) {
++				urb->status = 0;
++			}
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++			break;
++		}
++
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_BULK:
++		DWC_DEBUGPL(DBG_HCDV, "  Bulk transfer complete\n");
++		urb_xfer_done =
++		    update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++		if (urb_xfer_done) {
++			hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++			halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++			halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_non_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_INTERRUPT:
++		DWC_DEBUGPL(DBG_HCDV, "  Interrupt transfer complete\n");
++		urb_xfer_done =
++			update_urb_state_xfer_comp(hc, hc_regs, urb, qtd);
++
++		/*
++		 * Interrupt URB is done on the first transfer complete
++		 * interrupt.
++		 */
++		if (urb_xfer_done) {
++				hcd->fops->complete(hcd, urb->priv, urb, urb->status);
++				halt_status = DWC_OTG_HC_XFER_URB_COMPLETE;
++		} else {
++				halt_status = DWC_OTG_HC_XFER_COMPLETE;
++		}
++
++		dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	case UE_ISOCHRONOUS:
++		DWC_DEBUGPL(DBG_HCDV, "  Isochronous transfer complete\n");
++		if (qtd->isoc_split_pos == DWC_HCSPLIT_XACTPOS_ALL) {
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_COMPLETE);
++		}
++		complete_periodic_xfer(hcd, hc, hc_regs, qtd, halt_status);
++		break;
++	}
++
++handle_xfercomp_done:
++	disable_hc_int(hc_regs, xfercompl);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel STALL interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_stall_intr(dwc_otg_hcd_t * hcd,
++				    dwc_hc_t * hc,
++				    dwc_otg_hc_regs_t * hc_regs,
++				    dwc_otg_qtd_t * qtd)
++{
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++	int pipe_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++
++	DWC_DEBUGPL(DBG_HCD, "--Host Channel %d Interrupt: "
++		    "STALL Received--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs, DWC_OTG_HC_XFER_STALL);
++		goto handle_stall_done;
++	}
++
++	if (pipe_type == UE_CONTROL) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++	}
++
++	if (pipe_type == UE_BULK || pipe_type == UE_INTERRUPT) {
++		hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_PIPE);
++		/*
++		 * USB protocol requires resetting the data toggle for bulk
++		 * and interrupt endpoints when a CLEAR_FEATURE(ENDPOINT_HALT)
++		 * setup command is issued to the endpoint. Anticipate the
++		 * CLEAR_FEATURE command since a STALL has occurred and reset
++		 * the data toggle now.
++		 */
++		hc->qh->data_toggle = 0;
++	}
++
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_STALL);
++
++handle_stall_done:
++	disable_hc_int(hc_regs, stall);
++
++	return 1;
++}
++
++/*
++ * Updates the state of the URB when a transfer has been stopped due to an
++ * abnormal condition before the transfer completes. Modifies the
++ * actual_length field of the URB to reflect the number of bytes that have
++ * actually been transferred via the host channel.
++ */
++static void update_urb_state_xfer_intr(dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_hcd_urb_t * urb,
++				       dwc_otg_qtd_t * qtd,
++				       dwc_otg_halt_status_e halt_status)
++{
++	uint32_t bytes_transferred = get_actual_xfer_length(hc, hc_regs, qtd,
++							    halt_status, NULL);
++	/* non DWORD-aligned buffer case handling. */
++	if (hc->align_buff && bytes_transferred && hc->ep_is_in) {
++		dwc_memcpy(urb->buf + urb->actual_length, hc->qh->dw_align_buf,
++			   bytes_transferred);
++	}
++
++	urb->actual_length += bytes_transferred;
++
++#ifdef DEBUG
++	{
++		hctsiz_data_t hctsiz;
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		DWC_DEBUGPL(DBG_HCDV, "DWC_otg: %s: %s, channel %d\n",
++			    __func__, (hc->ep_is_in ? "IN" : "OUT"),
++			    hc->hc_num);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->start_pkt_count %d\n",
++			    hc->start_pkt_count);
++		DWC_DEBUGPL(DBG_HCDV, "  hctsiz.pktcnt %d\n", hctsiz.b.pktcnt);
++		DWC_DEBUGPL(DBG_HCDV, "  hc->max_packet %d\n", hc->max_packet);
++		DWC_DEBUGPL(DBG_HCDV, "  bytes_transferred %d\n",
++			    bytes_transferred);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->actual_length %d\n",
++			    urb->actual_length);
++		DWC_DEBUGPL(DBG_HCDV, "  urb->transfer_buffer_length %d\n",
++			    urb->length);
++	}
++#endif
++}
++
++/**
++ * Handles a host channel NAK interrupt. This handler may be called in either
++ * DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nak_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NAK Received--\n", hc->hc_num);
++
++	/*
++	 * Handle NAK for IN/OUT SSPLIT/CSPLIT transfers, bulk, control, and
++	 * interrupt.  Re-start the SSPLIT transfer.
++	 */
++	if (hc->do_split) {
++		if (hc->complete_split) {
++			qtd->error_count = 0;
++		}
++		qtd->complete_split = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		goto handle_nak_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		if (hcd->core_if->dma_enable && hc->ep_is_in) {
++			/*
++			 * NAK interrupts are enabled on bulk/control IN
++			 * transfers in DMA mode for the sole purpose of
++			 * resetting the error count after a transaction error
++			 * occurs. The core will continue transferring data.
++			 */
++			qtd->error_count = 0;
++			goto handle_nak_done;
++		}
++
++		/*
++		 * NAK interrupts normally occur during OUT transfers in DMA
++		 * or Slave mode. For IN transfers, more requests will be
++		 * queued as request queue space is available.
++		 */
++		qtd->error_count = 0;
++
++		if (!hc->qh->ping_state) {
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_NAK);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++			if (hc->speed == DWC_OTG_EP_SPEED_HIGH)
++				hc->qh->ping_state = 1;
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will
++		 * start/continue.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count = 0;
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NAK);
++		break;
++	case UE_ISOCHRONOUS:
++		/* Should never get called for isochronous transfers. */
++		DWC_ASSERT(1, "NACK interrupt for ISOC transfer\n");
++		break;
++	}
++
++handle_nak_done:
++	disable_hc_int(hc_regs, nak);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel ACK interrupt. This interrupt is enabled when
++ * performing the PING protocol in Slave mode, when errors occur during
++ * either Slave mode or DMA mode, and during Start Split transactions.
++ */
++static int32_t handle_hc_ack_intr(dwc_otg_hcd_t * hcd,
++				  dwc_hc_t * hc,
++				  dwc_otg_hc_regs_t * hc_regs,
++				  dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "ACK Received--\n", hc->hc_num);
++
++	if (hc->do_split) {
++		/*
++		 * Handle ACK on SSPLIT.
++		 * ACK should not occur in CSPLIT.
++		 */
++		if (!hc->ep_is_in && hc->data_pid_start != DWC_OTG_HC_PID_SETUP) {
++			qtd->ssplit_out_xfer_count = hc->xfer_len;
++		}
++		if (!(hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in)) {
++			/* Don't need complete for isochronous out transfers. */
++			qtd->complete_split = 1;
++		}
++
++		/* ISOC OUT */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			switch (hc->xact_pos) {
++			case DWC_HCSPLIT_XACTPOS_ALL:
++				break;
++			case DWC_HCSPLIT_XACTPOS_END:
++				qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++				qtd->isoc_split_offset = 0;
++				break;
++			case DWC_HCSPLIT_XACTPOS_BEGIN:
++			case DWC_HCSPLIT_XACTPOS_MID:
++				/*
++				 * For BEGIN or MID, calculate the length for
++				 * the next microframe to determine the correct
++				 * SSPLIT token, either MID or END.
++				 */
++				{
++					struct dwc_otg_hcd_iso_packet_desc
++					*frame_desc;
++
++					frame_desc =
++					    &qtd->urb->
++					    iso_descs[qtd->isoc_frame_index];
++					qtd->isoc_split_offset += 188;
++
++					if ((frame_desc->length -
++					     qtd->isoc_split_offset) <= 188) {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_END;
++					} else {
++						qtd->isoc_split_pos =
++						    DWC_HCSPLIT_XACTPOS_MID;
++					}
++
++				}
++				break;
++			}
++		} else {
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	} else {
++		qtd->error_count = 0;
++
++		if (hc->qh->ping_state) {
++			hc->qh->ping_state = 0;
++			/*
++			 * Halt the channel so the transfer can be re-started
++			 * from the appropriate point. This only happens in
++			 * Slave mode. In DMA mode, the ping_state is cleared
++			 * when the transfer is started because the core
++			 * automatically executes the PING, then the transfer.
++			 */
++			halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_ACK);
++		}
++	}
++
++	/*
++	 * If the ACK occurred when _not_ in the PING state, let the channel
++	 * continue transferring data after clearing the error count.
++	 */
++
++	disable_hc_int(hc_regs, ack);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel NYET interrupt. This interrupt should only occur on
++ * Bulk and Control OUT endpoints and for complete split transactions. If a
++ * NYET occurs at the same time as a Transfer Complete interrupt, it is
++ * handled in the xfercomp interrupt handler, not here. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_nyet_intr(dwc_otg_hcd_t * hcd,
++				   dwc_hc_t * hc,
++				   dwc_otg_hc_regs_t * hc_regs,
++				   dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "NYET Received--\n", hc->hc_num);
++
++	/*
++	 * NYET on CSPLIT
++	 * re-do the CSPLIT immediately on non-periodic
++	 */
++	if (hc->do_split && hc->complete_split) {
++		if (hc->ep_is_in && (hc->ep_type == DWC_OTG_EP_TYPE_ISOC)
++		    && hcd->core_if->dma_enable) {
++			qtd->complete_split = 0;
++			qtd->isoc_split_offset = 0;
++			if (++qtd->isoc_frame_index == qtd->urb->packet_count) {
++				hcd->fops->complete(hcd, qtd->urb->priv, qtd->urb, 0);
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_URB_COMPLETE);
++			}
++			else
++				release_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NO_HALT_STATUS);
++			goto handle_nyet_done;
++		}
++
++		if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++		    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++			int frnum = dwc_otg_hcd_get_frame_number(hcd);
++
++			if (dwc_full_frame_num(frnum) !=
++			    dwc_full_frame_num(hc->qh->sched_frame)) {
++				/*
++				 * No longer in the same full speed frame.
++				 * Treat this as a transaction error.
++				 */
++#if 0
++				/** @todo Fix system performance so this can
++				 * be treated as an error. Right now complete
++				 * splits cannot be scheduled precisely enough
++				 * due to other system activity, so this error
++				 * occurs regularly in Slave mode.
++				 */
++				qtd->error_count++;
++#endif
++				qtd->complete_split = 0;
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_XACT_ERR);
++				/** @todo add support for isoc release */
++				goto handle_nyet_done;
++			}
++		}
++
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++		goto handle_nyet_done;
++	}
++
++	hc->qh->ping_state = 1;
++	qtd->error_count = 0;
++
++	update_urb_state_xfer_intr(hc, hc_regs, qtd->urb, qtd,
++				   DWC_OTG_HC_XFER_NYET);
++	dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++
++	/*
++	 * Halt the channel and re-start the transfer so the PING
++	 * protocol will start.
++	 */
++	halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_NYET);
++
++handle_nyet_done:
++	disable_hc_int(hc_regs, nyet);
++	return 1;
++}
++
++/**
++ * Handles a host channel babble interrupt. This handler may be called in
++ * either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_babble_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Babble Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_BABBLE_ERR);
++		goto handle_babble_done;
++	}
++
++	if (hc->ep_type != DWC_OTG_EP_TYPE_ISOC) {
++		hcd->fops->complete(hcd, qtd->urb->priv,
++				    qtd->urb, -DWC_E_OVERFLOW);
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_BABBLE_ERR);
++	} else {
++		dwc_otg_halt_status_e halt_status;
++		halt_status = update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						    DWC_OTG_HC_XFER_BABBLE_ERR);
++		halt_channel(hcd, hc, qtd, halt_status);
++	}
++
++handle_babble_done:
++	disable_hc_int(hc_regs, bblerr);
++	return 1;
++}
++
++/**
++ * Handles a host channel AHB error interrupt. This handler is only called in
++ * DMA mode.
++ */
++static int32_t handle_hc_ahberr_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hcsplt_data_t hcsplt;
++	hctsiz_data_t hctsiz;
++	uint32_t hcdma;
++	char *pipetype, *speed;
++
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "AHB Error--\n", hc->hc_num);
++
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++	hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++	hcdma = DWC_READ_REG32(&hc_regs->hcdma);
++
++	DWC_ERROR("AHB ERROR, Channel %d\n", hc->hc_num);
++	DWC_ERROR("  hcchar 0x%08x, hcsplt 0x%08x\n", hcchar.d32, hcsplt.d32);
++	DWC_ERROR("  hctsiz 0x%08x, hcdma 0x%08x\n", hctsiz.d32, hcdma);
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Enqueue\n");
++	DWC_ERROR("  Device address: %d\n",
++		  dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_ERROR("  Endpoint: %d, %s\n",
++		  dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		  (dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT"));
++
++	switch (dwc_otg_hcd_get_pipe_type(&urb->pipe_info)) {
++	case UE_CONTROL:
++		pipetype = "CONTROL";
++		break;
++	case UE_BULK:
++		pipetype = "BULK";
++		break;
++	case UE_INTERRUPT:
++		pipetype = "INTERRUPT";
++		break;
++	case UE_ISOCHRONOUS:
++		pipetype = "ISOCHRONOUS";
++		break;
++	default:
++		pipetype = "UNKNOWN";
++		break;
++	}
++
++	DWC_ERROR("  Endpoint type: %s\n", pipetype);
++
++	switch (hc->speed) {
++	case DWC_OTG_EP_SPEED_HIGH:
++		speed = "HIGH";
++		break;
++	case DWC_OTG_EP_SPEED_FULL:
++		speed = "FULL";
++		break;
++	case DWC_OTG_EP_SPEED_LOW:
++		speed = "LOW";
++		break;
++	default:
++		speed = "UNKNOWN";
++		break;
++	};
++
++	DWC_ERROR("  Speed: %s\n", speed);
++
++	DWC_ERROR("  Max packet size: %d\n",
++		  dwc_otg_hcd_get_mps(&urb->pipe_info));
++	DWC_ERROR("  Data buffer length: %d\n", urb->length);
++	DWC_ERROR("  Transfer buffer: %p, Transfer DMA: %p\n",
++		  urb->buf, (void *)urb->dma);
++	DWC_ERROR("  Setup buffer: %p, Setup DMA: %p\n",
++		  urb->setup_packet, (void *)urb->setup_dma);
++	DWC_ERROR("  Interval: %d\n", urb->interval);
++
++	/* Core haltes the channel for Descriptor DMA mode */
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_AHB_ERR);
++		goto handle_ahberr_done;
++	}
++
++	hcd->fops->complete(hcd, urb->priv, urb, -DWC_E_IO);
++
++	/*
++	 * Force a channel halt. Don't call halt_channel because that won't
++	 * write to the HCCHARn register in DMA mode to force the halt.
++	 */
++	dwc_otg_hc_halt(hcd->core_if, hc, DWC_OTG_HC_XFER_AHB_ERR);
++handle_ahberr_done:
++	disable_hc_int(hc_regs, ahberr);
++	return 1;
++}
++
++/**
++ * Handles a host channel transaction error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_xacterr_intr(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Transaction Error--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++					       DWC_OTG_HC_XFER_XACT_ERR);
++		goto handle_xacterr_done;
++	}
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		qtd->error_count++;
++		if (!hc->qh->ping_state) {
++
++			update_urb_state_xfer_intr(hc, hc_regs,
++						   qtd->urb, qtd,
++						   DWC_OTG_HC_XFER_XACT_ERR);
++			dwc_otg_hcd_save_data_toggle(hc, hc_regs, qtd);
++			if (!hc->ep_is_in && hc->speed == DWC_OTG_EP_SPEED_HIGH) {
++				hc->qh->ping_state = 1;
++			}
++		}
++
++		/*
++		 * Halt the channel so the transfer can be re-started from
++		 * the appropriate point or the PING protocol will start.
++		 */
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_INTERRUPT:
++		qtd->error_count++;
++		if (hc->do_split && hc->complete_split) {
++			qtd->complete_split = 0;
++		}
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_XACT_ERR);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_XACT_ERR);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++handle_xacterr_done:
++	disable_hc_int(hc_regs, xacterr);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel frame overrun interrupt. This handler may be called
++ * in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_frmovrun_intr(dwc_otg_hcd_t * hcd,
++				       dwc_hc_t * hc,
++				       dwc_otg_hc_regs_t * hc_regs,
++				       dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Frame Overrun--\n", hc->hc_num);
++
++	switch (dwc_otg_hcd_get_pipe_type(&qtd->urb->pipe_info)) {
++	case UE_CONTROL:
++	case UE_BULK:
++		break;
++	case UE_INTERRUPT:
++		halt_channel(hcd, hc, qtd, DWC_OTG_HC_XFER_FRAME_OVERRUN);
++		break;
++	case UE_ISOCHRONOUS:
++		{
++			dwc_otg_halt_status_e halt_status;
++			halt_status =
++			    update_isoc_urb_state(hcd, hc, hc_regs, qtd,
++						  DWC_OTG_HC_XFER_FRAME_OVERRUN);
++
++			halt_channel(hcd, hc, qtd, halt_status);
++		}
++		break;
++	}
++
++	disable_hc_int(hc_regs, frmovrun);
++
++	return 1;
++}
++
++/**
++ * Handles a host channel data toggle error interrupt. This handler may be
++ * called in either DMA mode or Slave mode.
++ */
++static int32_t handle_hc_datatglerr_intr(dwc_otg_hcd_t * hcd,
++					 dwc_hc_t * hc,
++					 dwc_otg_hc_regs_t * hc_regs,
++					 dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Data Toggle Error--\n", hc->hc_num);
++
++	if (hc->ep_is_in) {
++		qtd->error_count = 0;
++	} else {
++		DWC_ERROR("Data Toggle Error on OUT transfer,"
++			  "channel %d\n", hc->hc_num);
++	}
++
++	disable_hc_int(hc_regs, datatglerr);
++
++	return 1;
++}
++
++#ifdef DEBUG
++/**
++ * This function is for debug only. It checks that a valid halt status is set
++ * and that HCCHARn.chdis is clear. If there's a problem, corrective action is
++ * taken and a warning is issued.
++ * @return 1 if halt status is ok, 0 otherwise.
++ */
++static inline int halt_status_ok(dwc_otg_hcd_t * hcd,
++				 dwc_hc_t * hc,
++				 dwc_otg_hc_regs_t * hc_regs,
++				 dwc_otg_qtd_t * qtd)
++{
++	hcchar_data_t hcchar;
++	hctsiz_data_t hctsiz;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	hcsplt_data_t hcsplt;
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS) {
++		/*
++		 * This code is here only as a check. This condition should
++		 * never happen. Ignore the halt if it does occur.
++		 */
++		hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++		hctsiz.d32 = DWC_READ_REG32(&hc_regs->hctsiz);
++		hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++		hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++		hcsplt.d32 = DWC_READ_REG32(&hc_regs->hcsplt);
++		DWC_WARN
++		    ("%s: hc->halt_status == DWC_OTG_HC_XFER_NO_HALT_STATUS, "
++		     "channel %d, hcchar 0x%08x, hctsiz 0x%08x, "
++		     "hcint 0x%08x, hcintmsk 0x%08x, "
++		     "hcsplt 0x%08x, qtd->complete_split %d\n", __func__,
++		     hc->hc_num, hcchar.d32, hctsiz.d32, hcint.d32,
++		     hcintmsk.d32, hcsplt.d32, qtd->complete_split);
++
++		DWC_WARN("%s: no halt status, channel %d, ignoring interrupt\n",
++			 __func__, hc->hc_num);
++		DWC_WARN("\n");
++		clear_hc_int(hc_regs, chhltd);
++		return 0;
++	}
++
++	/*
++	 * This code is here only as a check. hcchar.chdis should
++	 * never be set when the halt interrupt occurs. Halt the
++	 * channel again if it does occur.
++	 */
++	hcchar.d32 = DWC_READ_REG32(&hc_regs->hcchar);
++	if (hcchar.b.chdis) {
++		DWC_WARN("%s: hcchar.chdis set unexpectedly, "
++			 "hcchar 0x%08x, trying to halt again\n",
++			 __func__, hcchar.d32);
++		clear_hc_int(hc_regs, chhltd);
++		hc->halt_pending = 0;
++		halt_channel(hcd, hc, qtd, hc->halt_status);
++		return 0;
++	}
++
++	return 1;
++}
++#endif
++
++/**
++ * Handles a host Channel Halted interrupt in DMA mode. This handler
++ * determines the reason the channel halted and proceeds accordingly.
++ */
++static void handle_hc_chhltd_intr_dma(dwc_otg_hcd_t * hcd,
++				      dwc_hc_t * hc,
++				      dwc_otg_hc_regs_t * hc_regs,
++				      dwc_otg_qtd_t * qtd)
++{
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	int out_nak_enh = 0;
++
++	/* For core with OUT NAK enhancement, the flow for high-
++	 * speed CONTROL/BULK OUT is handled a little differently.
++	 */
++	if (hcd->core_if->snpsid >= OTG_CORE_REV_2_71a) {
++		if (hc->speed == DWC_OTG_EP_SPEED_HIGH && !hc->ep_is_in &&
++		    (hc->ep_type == DWC_OTG_EP_TYPE_CONTROL ||
++		     hc->ep_type == DWC_OTG_EP_TYPE_BULK)) {
++			out_nak_enh = 1;
++		}
++	}
++
++	if (hc->halt_status == DWC_OTG_HC_XFER_URB_DEQUEUE ||
++	    (hc->halt_status == DWC_OTG_HC_XFER_AHB_ERR
++	     && !hcd->core_if->dma_desc_enable)) {
++		/*
++		 * Just release the channel. A dequeue can happen on a
++		 * transfer timeout. In the case of an AHB Error, the channel
++		 * was forced to halt because there's no way to gracefully
++		 * recover.
++		 */
++		if (hcd->core_if->dma_desc_enable)
++			dwc_otg_hcd_complete_xfer_ddma(hcd, hc, hc_regs,
++						       hc->halt_status);
++		else
++			release_channel(hcd, hc, qtd, hc->halt_status);
++		return;
++	}
++
++	/* Read the HCINTn register to determine the cause for the halt. */
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++
++	if (hcint.b.xfercomp) {
++		/** @todo This is here because of a possible hardware bug.  Spec
++		 * says that on SPLIT-ISOC OUT transfers in DMA mode that a HALT
++		 * interrupt w/ACK bit set should occur, but I only see the
++		 * XFERCOMP bit, even with it masked out.  This is a workaround
++		 * for that behavior.  Should fix this when hardware is fixed.
++		 */
++		if (hc->ep_type == DWC_OTG_EP_TYPE_ISOC && !hc->ep_is_in) {
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		}
++		handle_hc_xfercomp_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.stall) {
++		handle_hc_stall_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xacterr && !hcd->core_if->dma_desc_enable) {
++		if (out_nak_enh) {
++			if (hcint.b.nyet || hcint.b.nak || hcint.b.ack) {
++				DWC_DEBUGPL(DBG_HCD, "XactErr with NYET/NAK/ACK\n");
++				qtd->error_count = 0;
++			} else {
++				DWC_DEBUGPL(DBG_HCD, "XactErr without NYET/NAK/ACK\n");
++			}
++		}
++
++		/*
++		 * Must handle xacterr before nak or ack. Could get a xacterr
++		 * at the same time as either of these on a BULK/CONTROL OUT
++		 * that started with a PING. The xacterr takes precedence.
++		 */
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.xcs_xact && hcd->core_if->dma_desc_enable) {
++		handle_hc_xacterr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.ahberr && hcd->core_if->dma_desc_enable) {
++		handle_hc_ahberr_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.bblerr) {
++		handle_hc_babble_intr(hcd, hc, hc_regs, qtd);
++	} else if (hcint.b.frmovrun) {
++		handle_hc_frmovrun_intr(hcd, hc, hc_regs, qtd);
++	} else if (!out_nak_enh) {
++		if (hcint.b.nyet) {
++			/*
++			 * Must handle nyet before nak or ack. Could get a nyet at the
++			 * same time as either of those on a BULK/CONTROL OUT that
++			 * started with a PING. The nyet takes precedence.
++			 */
++			handle_hc_nyet_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.nak && !hcintmsk.b.nak) {
++			/*
++			 * If nak is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the nak is handled by
++			 * the nak interrupt handler, not here. Handle nak here for
++			 * BULK/CONTROL OUT transfers, which halt on a NAK to allow
++			 * rewinding the buffer pointer.
++			 */
++			handle_hc_nak_intr(hcd, hc, hc_regs, qtd);
++		} else if (hcint.b.ack && !hcintmsk.b.ack) {
++			/*
++			 * If ack is not masked, it's because a non-split IN transfer
++			 * is in an error state. In that case, the ack is handled by
++			 * the ack interrupt handler, not here. Handle ack here for
++			 * split transfers. Start splits halt on ACK.
++			 */
++			handle_hc_ack_intr(hcd, hc, hc_regs, qtd);
++		} else {
++			if (hc->ep_type == DWC_OTG_EP_TYPE_INTR ||
++			    hc->ep_type == DWC_OTG_EP_TYPE_ISOC) {
++				/*
++				 * A periodic transfer halted with no other channel
++				 * interrupts set. Assume it was halted by the core
++				 * because it could not be completed in its scheduled
++				 * (micro)frame.
++				 */
++#ifdef DEBUG
++				DWC_PRINTF
++				    ("%s: Halt channel %d (assume incomplete periodic transfer)\n",
++				     __func__, hc->hc_num);
++#endif
++				halt_channel(hcd, hc, qtd,
++					     DWC_OTG_HC_XFER_PERIODIC_INCOMPLETE);
++			} else {
++				DWC_ERROR
++				    ("%s: Channel %d, DMA Mode -- ChHltd set, but reason "
++				     "for halting is unknown, hcint 0x%08x, intsts 0x%08x\n",
++				     __func__, hc->hc_num, hcint.d32,
++				     DWC_READ_REG32(&hcd->
++						    core_if->core_global_regs->
++						    gintsts));
++			}
++
++		}
++	} else {
++		DWC_PRINTF("NYET/NAK/ACK/other in non-error case, 0x%08x\n",
++			   hcint.d32);
++	}
++}
++
++/**
++ * Handles a host channel Channel Halted interrupt.
++ *
++ * In slave mode, this handler is called only when the driver specifically
++ * requests a halt. This occurs during handling other host channel interrupts
++ * (e.g. nak, xacterr, stall, nyet, etc.).
++ *
++ * In DMA mode, this is the interrupt that occurs when the core has finished
++ * processing a transfer on a channel. Other host channel interrupts (except
++ * ahberr) are disabled in DMA mode.
++ */
++static int32_t handle_hc_chhltd_intr(dwc_otg_hcd_t * hcd,
++				     dwc_hc_t * hc,
++				     dwc_otg_hc_regs_t * hc_regs,
++				     dwc_otg_qtd_t * qtd)
++{
++	DWC_DEBUGPL(DBG_HCDI, "--Host Channel %d Interrupt: "
++		    "Channel Halted--\n", hc->hc_num);
++
++	if (hcd->core_if->dma_enable) {
++		handle_hc_chhltd_intr_dma(hcd, hc, hc_regs, qtd);
++	} else {
++#ifdef DEBUG
++		if (!halt_status_ok(hcd, hc, hc_regs, qtd)) {
++			return 1;
++		}
++#endif
++		release_channel(hcd, hc, qtd, hc->halt_status);
++	}
++
++	return 1;
++}
++
++/** Handles interrupt for a specific Host Channel */
++int32_t dwc_otg_hcd_handle_hc_n_intr(dwc_otg_hcd_t * dwc_otg_hcd, uint32_t num)
++{
++	int retval = 0;
++	hcint_data_t hcint;
++	hcintmsk_data_t hcintmsk;
++	dwc_hc_t *hc;
++	dwc_otg_hc_regs_t *hc_regs;
++	dwc_otg_qtd_t *qtd;
++
++	DWC_DEBUGPL(DBG_HCDV, "--Host Channel Interrupt--, Channel %d\n", num);
++
++	hc = dwc_otg_hcd->hc_ptr_array[num];
++	hc_regs = dwc_otg_hcd->core_if->host_if->hc_regs[num];
++	qtd = DWC_CIRCLEQ_FIRST(&hc->qh->qtd_list);
++
++	hcint.d32 = DWC_READ_REG32(&hc_regs->hcint);
++	hcintmsk.d32 = DWC_READ_REG32(&hc_regs->hcintmsk);
++	DWC_DEBUGPL(DBG_HCDV,
++		    "  hcint 0x%08x, hcintmsk 0x%08x, hcint&hcintmsk 0x%08x\n",
++		    hcint.d32, hcintmsk.d32, (hcint.d32 & hcintmsk.d32));
++	hcint.d32 = hcint.d32 & hcintmsk.d32;
++
++	if (!dwc_otg_hcd->core_if->dma_enable) {
++		if (hcint.b.chhltd && hcint.d32 != 0x2) {
++			hcint.b.chhltd = 0;
++		}
++	}
++
++	if (hcint.b.xfercomp) {
++		retval |=
++		    handle_hc_xfercomp_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++		/*
++		 * If NYET occurred at same time as Xfer Complete, the NYET is
++		 * handled by the Xfer Complete interrupt handler. Don't want
++		 * to call the NYET interrupt handler in this case.
++		 */
++		hcint.b.nyet = 0;
++	}
++	if (hcint.b.chhltd) {
++		retval |= handle_hc_chhltd_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ahberr) {
++		retval |= handle_hc_ahberr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.stall) {
++		retval |= handle_hc_stall_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nak) {
++		retval |= handle_hc_nak_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.ack) {
++		retval |= handle_hc_ack_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.nyet) {
++		retval |= handle_hc_nyet_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.xacterr) {
++		retval |= handle_hc_xacterr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.bblerr) {
++		retval |= handle_hc_babble_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.frmovrun) {
++		retval |=
++		    handle_hc_frmovrun_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++	if (hcint.b.datatglerr) {
++		retval |=
++		    handle_hc_datatglerr_intr(dwc_otg_hcd, hc, hc_regs, qtd);
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+new file mode 100644
+index 0000000..e4787f5
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_linux.c
+@@ -0,0 +1,893 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_linux.c $
++ * $Revision: #20 $
++ * $Date: 2011/10/26 $
++ * $Change: 1872981 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the implementation of the HCD. In Linux, the HCD
++ * implements the hc_driver API.
++ */
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/version.h>
++#include <asm/io.h>
++#include <linux/usb.h>
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35)
++#include <../drivers/usb/core/hcd.h>
++#else
++#include <linux/usb/hcd.h>
++#endif
++
++#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#define USB_URB_EP_LINKING 1
++#else
++#define USB_URB_EP_LINKING 0
++#endif
++
++#include "dwc_otg_hcd_if.h"
++#include "dwc_otg_dbg.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_hcd.h"
++/**
++ * Gets the endpoint number from a _bEndpointAddress argument. The endpoint is
++ * qualified with its direction (possible 32 endpoints per device).
++ */
++#define dwc_ep_addr_to_endpoint(_bEndpointAddress_) ((_bEndpointAddress_ & USB_ENDPOINT_NUMBER_MASK) | \
++						     ((_bEndpointAddress_ & USB_DIR_IN) != 0) << 4)
++
++static const char dwc_otg_hcd_name[] = "dwc_otg_hcd";
++
++/** @name Linux HC Driver API Functions */
++/** @{ */
++/* manage i/o requests, device state */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags);
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb);
++#endif
++#else /* kernels at or post 2.6.30 */
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd,
++                               struct urb *urb, int status);
++#endif /* LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) */
++
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
++#endif
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd);
++extern int hcd_start(struct usb_hcd *hcd);
++extern void hcd_stop(struct usb_hcd *hcd);
++static int get_frame_number(struct usb_hcd *hcd);
++extern int hub_status_data(struct usb_hcd *hcd, char *buf);
++extern int hub_control(struct usb_hcd *hcd,
++		       u16 typeReq,
++		       u16 wValue, u16 wIndex, char *buf, u16 wLength);
++
++struct wrapper_priv_data {
++	dwc_otg_hcd_t *dwc_otg_hcd;
++};
++
++/** @} */
++
++static struct hc_driver dwc_otg_hc_driver = {
++
++	.description = dwc_otg_hcd_name,
++	.product_desc = "DWC OTG Controller",
++	.hcd_priv_size = sizeof(struct wrapper_priv_data),
++
++	.irq = dwc_otg_hcd_irq,
++
++	.flags = HCD_MEMORY | HCD_USB2,
++
++	//.reset =
++	.start = hcd_start,
++	//.suspend =
++	//.resume =
++	.stop = hcd_stop,
++
++	.urb_enqueue = dwc_otg_urb_enqueue,
++	.urb_dequeue = dwc_otg_urb_dequeue,
++	.endpoint_disable = endpoint_disable,
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++	.endpoint_reset = endpoint_reset,
++#endif
++	.get_frame_number = get_frame_number,
++
++	.hub_status_data = hub_status_data,
++	.hub_control = hub_control,
++	//.bus_suspend =
++	//.bus_resume =
++};
++
++/** Gets the dwc_otg_hcd from a struct usb_hcd */
++static inline dwc_otg_hcd_t *hcd_to_dwc_otg_hcd(struct usb_hcd *hcd)
++{
++	struct wrapper_priv_data *p;
++	p = (struct wrapper_priv_data *)(hcd->hcd_priv);
++	return p->dwc_otg_hcd;
++}
++
++/** Gets the struct usb_hcd that contains a dwc_otg_hcd_t. */
++static inline struct usb_hcd *dwc_otg_hcd_to_hcd(dwc_otg_hcd_t * dwc_otg_hcd)
++{
++	return dwc_otg_hcd_get_priv_data(dwc_otg_hcd);
++}
++
++/** Gets the usb_host_endpoint associated with an URB. */
++inline struct usb_host_endpoint *dwc_urb_to_endpoint(struct urb *urb)
++{
++	struct usb_device *dev = urb->dev;
++	int ep_num = usb_pipeendpoint(urb->pipe);
++
++	if (usb_pipein(urb->pipe))
++		return dev->ep_in[ep_num];
++	else
++		return dev->ep_out[ep_num];
++}
++
++static int _disconnect(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = 0;
++	return 0;
++}
++
++static int _start(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++
++	usb_hcd->self.is_b_host = dwc_otg_hcd_is_b_host(hcd);
++	hcd_start(usb_hcd);
++
++	return 0;
++}
++
++static int _hub_info(dwc_otg_hcd_t * hcd, void *urb_handle, uint32_t * hub_addr,
++		     uint32_t * port_addr)
++{
++   struct urb *urb = (struct urb *)urb_handle;
++   struct usb_bus *bus;
++#if 1 //GRAYG - temporary
++   if (NULL == urb_handle)
++      DWC_ERROR("**** %s - NULL URB handle\n", __func__);//GRAYG
++   if (NULL == urb->dev)
++      DWC_ERROR("**** %s - URB has no device\n", __func__);//GRAYG
++   if (NULL == port_addr)
++      DWC_ERROR("**** %s - NULL port_address\n", __func__);//GRAYG
++#endif
++   if (urb->dev->tt) {
++        if (NULL == urb->dev->tt->hub) {
++                DWC_ERROR("**** %s - (URB's transactor has no TT - giving no hub)\n",
++                           __func__); //GRAYG
++                //*hub_addr = (u8)usb_pipedevice(urb->pipe); //GRAYG
++                *hub_addr = 0; //GRAYG
++                // we probably shouldn't have a transaction translator if
++                // there's no associated hub?
++        } else {
++		bus = hcd_to_bus(dwc_otg_hcd_to_hcd(hcd));
++		if (urb->dev->tt->hub == bus->root_hub)
++			*hub_addr = 0;
++		else
++			*hub_addr = urb->dev->tt->hub->devnum;
++	}
++	*port_addr = urb->dev->tt->multi ? urb->dev->ttport : 1;
++   } else {
++        *hub_addr = 0;
++	*port_addr = urb->dev->ttport;
++   }
++   return 0;
++}
++
++static int _speed(dwc_otg_hcd_t * hcd, void *urb_handle)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++	return urb->dev->speed;
++}
++
++static int _get_b_hnp_enable(dwc_otg_hcd_t * hcd)
++{
++	struct usb_hcd *usb_hcd = dwc_otg_hcd_to_hcd(hcd);
++	return usb_hcd->self.b_hnp_enable;
++}
++
++static void allocate_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++				   struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated += bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs++;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs++;
++	}
++}
++
++static void free_bus_bandwidth(struct usb_hcd *hcd, uint32_t bw,
++			       struct urb *urb)
++{
++	hcd_to_bus(hcd)->bandwidth_allocated -= bw / urb->interval;
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		hcd_to_bus(hcd)->bandwidth_isoc_reqs--;
++	} else {
++		hcd_to_bus(hcd)->bandwidth_int_reqs--;
++	}
++}
++
++/**
++ * Sets the final status of an URB and returns it to the device driver. Any
++ * required cleanup of the URB is performed.
++ */
++static int _complete(dwc_otg_hcd_t * hcd, void *urb_handle,
++		     dwc_otg_hcd_urb_t * dwc_otg_urb, int32_t status)
++{
++	struct urb *urb = (struct urb *)urb_handle;
++
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		DWC_PRINTF("%s: urb %p, device %d, ep %d %s, status=%d\n",
++			   __func__, urb, usb_pipedevice(urb->pipe),
++			   usb_pipeendpoint(urb->pipe),
++			   usb_pipein(urb->pipe) ? "IN" : "OUT", status);
++		if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++			int i;
++			for (i = 0; i < urb->number_of_packets; i++) {
++				DWC_PRINTF("  ISO Desc %d status: %d\n",
++					   i, urb->iso_frame_desc[i].status);
++			}
++		}
++	}
++
++	urb->actual_length = dwc_otg_hcd_urb_get_actual_length(dwc_otg_urb);
++	/* Convert status value. */
++	switch (status) {
++	case -DWC_E_PROTOCOL:
++		status = -EPROTO;
++		break;
++	case -DWC_E_IN_PROGRESS:
++		status = -EINPROGRESS;
++		break;
++	case -DWC_E_PIPE:
++		status = -EPIPE;
++		break;
++	case -DWC_E_IO:
++		status = -EIO;
++		break;
++	case -DWC_E_TIMEOUT:
++		status = -ETIMEDOUT;
++		break;
++	case -DWC_E_OVERFLOW:
++		status = -EOVERFLOW;
++		break;
++	default:
++		if (status) {
++			DWC_PRINTF("Uknown urb status %d\n", status);
++
++		}
++	}
++
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++
++		urb->error_count = dwc_otg_hcd_urb_get_error_count(dwc_otg_urb);
++		for (i = 0; i < urb->number_of_packets; ++i) {
++			urb->iso_frame_desc[i].actual_length =
++			    dwc_otg_hcd_urb_get_iso_desc_actual_length
++			    (dwc_otg_urb, i);
++			urb->iso_frame_desc[i].status =
++			    dwc_otg_hcd_urb_get_iso_desc_status(dwc_otg_urb, i);
++		}
++	}
++
++	urb->status = status;
++	urb->hcpriv = NULL;
++	if (!status) {
++		if ((urb->transfer_flags & URB_SHORT_NOT_OK) &&
++		    (urb->actual_length < urb->transfer_buffer_length)) {
++			urb->status = -EREMOTEIO;
++		}
++	}
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) ||
++	    (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		struct usb_host_endpoint *ep = dwc_urb_to_endpoint(urb);
++		if (ep) {
++			free_bus_bandwidth(dwc_otg_hcd_to_hcd(hcd),
++					   dwc_otg_hcd_get_ep_bandwidth(hcd,
++									ep->hcpriv),
++					   urb);
++		}
++	}
++
++	DWC_FREE(dwc_otg_urb);
++
++#if USB_URB_EP_LINKING
++        usb_hcd_unlink_urb_from_ep(dwc_otg_hcd_to_hcd(hcd), urb);
++#endif
++	DWC_SPINUNLOCK(hcd->lock);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb);
++#else
++	usb_hcd_giveback_urb(dwc_otg_hcd_to_hcd(hcd), urb, status);
++#endif
++	DWC_SPINLOCK(hcd->lock);
++
++	return 0;
++}
++
++static struct dwc_otg_hcd_function_ops hcd_fops = {
++	.start = _start,
++	.disconnect = _disconnect,
++	.hub_info = _hub_info,
++	.speed = _speed,
++	.complete = _complete,
++	.get_b_hnp_enable = _get_b_hnp_enable,
++};
++
++/**
++ * Initializes the HCD. This function allocates memory for and initializes the
++ * static parts of the usb_hcd and dwc_otg_hcd structures. It also registers the
++ * USB bus with the core and calls the hc_driver->start() function. It returns
++ * a negative error on failure.
++ */
++int hcd_init(dwc_bus_dev_t *_dev)
++{
++	struct usb_hcd *hcd = NULL;
++	dwc_otg_hcd_t *dwc_otg_hcd = NULL;
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++        u64 dmamask;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD INIT otg_dev=%p\n", otg_dev);
++
++	/* Set device flags indicating whether the HCD supports DMA. */
++	if (dwc_otg_is_dma_enable(otg_dev->core_if))
++                dmamask = DMA_BIT_MASK(32);
++        else
++                dmamask = 0;
++
++#if    defined(LM_INTERFACE) || defined(PLATFORM_INTERFACE)
++        dma_set_mask(&_dev->dev, dmamask);
++        dma_set_coherent_mask(&_dev->dev, dmamask);
++#elif  defined(PCI_INTERFACE)
++        pci_set_dma_mask(_dev, dmamask);
++        pci_set_consistent_dma_mask(_dev, dmamask);
++#endif
++
++	/*
++	 * Allocate memory for the base HCD plus the DWC OTG HCD.
++	 * Initialize the base HCD.
++	 */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, _dev->dev.bus_id);
++#else
++	hcd = usb_create_hcd(&dwc_otg_hc_driver, &_dev->dev, dev_name(&_dev->dev));
++	hcd->has_tt = 1;
++//      hcd->uses_new_polling = 1;
++//      hcd->poll_rh = 0;
++#endif
++	if (!hcd) {
++		retval = -ENOMEM;
++		goto error1;
++	}
++
++	hcd->regs = otg_dev->os_dep.base;
++
++	/* Initialize the DWC OTG HCD. */
++	dwc_otg_hcd = dwc_otg_hcd_alloc_hcd();
++	if (!dwc_otg_hcd) {
++		goto error2;
++	}
++	((struct wrapper_priv_data *)(hcd->hcd_priv))->dwc_otg_hcd =
++	    dwc_otg_hcd;
++	otg_dev->hcd = dwc_otg_hcd;
++
++	if (dwc_otg_hcd_init(dwc_otg_hcd, otg_dev->core_if)) {
++		goto error2;
++	}
++
++	otg_dev->hcd->otg_dev = otg_dev;
++	hcd->self.otg_port = dwc_otg_hcd_otg_port(dwc_otg_hcd);
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,33) //don't support for LM(with 2.6.20.1 kernel)
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,35) //version field absent later
++	hcd->self.otg_version = dwc_otg_get_otg_version(otg_dev->core_if);
++#endif
++	/* Don't support SG list at this point */
++	hcd->self.sg_tablesize = 0;
++#endif
++	/*
++	 * Finish generic HCD initialization and start the HCD. This function
++	 * allocates the DMA buffer pool, registers the USB bus, requests the
++	 * IRQ line, and calls hcd_start method.
++	 */
++#ifdef PLATFORM_INTERFACE
++        retval = usb_add_hcd(hcd, platform_get_irq(_dev, 0), IRQF_SHARED | IRQF_DISABLED);
++#else
++        retval = usb_add_hcd(hcd, _dev->irq, IRQF_SHARED | IRQF_DISABLED);
++#endif
++	if (retval < 0) {
++		goto error2;
++	}
++
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, hcd);
++	return 0;
++
++error2:
++	usb_put_hcd(hcd);
++error1:
++	return retval;
++}
++
++/**
++ * Removes the HCD.
++ * Frees memory and resources associated with the HCD and deregisters the bus.
++ */
++void hcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_hcd_t *dwc_otg_hcd;
++	struct usb_hcd *hcd;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD REMOVE otg_dev=%p\n", otg_dev);
++
++	if (!otg_dev) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev NULL!\n", __func__);
++		return;
++	}
++
++	dwc_otg_hcd = otg_dev->hcd;
++
++	if (!dwc_otg_hcd) {
++		DWC_DEBUGPL(DBG_ANY, "%s: otg_dev->hcd NULL!\n", __func__);
++		return;
++	}
++
++	hcd = dwc_otg_hcd_to_hcd(dwc_otg_hcd);
++
++	if (!hcd) {
++		DWC_DEBUGPL(DBG_ANY,
++			    "%s: dwc_otg_hcd_to_hcd(dwc_otg_hcd) NULL!\n",
++			    __func__);
++		return;
++	}
++	usb_remove_hcd(hcd);
++	dwc_otg_hcd_set_priv_data(dwc_otg_hcd, NULL);
++	dwc_otg_hcd_remove(dwc_otg_hcd);
++	usb_put_hcd(hcd);
++}
++
++/* =========================================================================
++ *  Linux HC Driver Functions
++ * ========================================================================= */
++
++/** Initializes the DWC_otg controller and its root hub and prepares it for host
++ * mode operation. Activates the root port. Returns 0 on success and a negative
++ * error code on failure. */
++int hcd_start(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	struct usb_bus *bus;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD START\n");
++	bus = hcd_to_bus(hcd);
++
++	hcd->state = HC_STATE_RUNNING;
++	if (dwc_otg_hcd_start(dwc_otg_hcd, &hcd_fops)) {
++		return 0;
++	}
++
++	/* Initialize and connect root hub if one is not already attached */
++	if (bus->root_hub) {
++		DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD Has Root Hub\n");
++		/* Inform the HUB driver to resume. */
++		usb_hcd_resume_root_hub(hcd);
++	}
++
++	return 0;
++}
++
++/**
++ * Halts the DWC_otg host mode operations in a clean manner. USB transfers are
++ * stopped.
++ */
++void hcd_stop(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	dwc_otg_hcd_stop(dwc_otg_hcd);
++}
++
++/** Returns the current frame number. */
++static int get_frame_number(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	return dwc_otg_hcd_get_frame_number(dwc_otg_hcd);
++}
++
++#ifdef DEBUG
++static void dump_urb_info(struct urb *urb, char *fn_name)
++{
++	DWC_PRINTF("%s, urb %p\n", fn_name, urb);
++	DWC_PRINTF("  Device address: %d\n", usb_pipedevice(urb->pipe));
++	DWC_PRINTF("  Endpoint: %d, %s\n", usb_pipeendpoint(urb->pipe),
++		   (usb_pipein(urb->pipe) ? "IN" : "OUT"));
++	DWC_PRINTF("  Endpoint type: %s\n", ( {
++					     char *pipetype;
++					     switch (usb_pipetype(urb->pipe)) {
++case PIPE_CONTROL:
++pipetype = "CONTROL"; break; case PIPE_BULK:
++pipetype = "BULK"; break; case PIPE_INTERRUPT:
++pipetype = "INTERRUPT"; break; case PIPE_ISOCHRONOUS:
++pipetype = "ISOCHRONOUS"; break; default:
++					     pipetype = "UNKNOWN"; break;};
++					     pipetype;}
++		   )) ;
++	DWC_PRINTF("  Speed: %s\n", ( {
++				     char *speed; switch (urb->dev->speed) {
++case USB_SPEED_HIGH:
++speed = "HIGH"; break; case USB_SPEED_FULL:
++speed = "FULL"; break; case USB_SPEED_LOW:
++speed = "LOW"; break; default:
++				     speed = "UNKNOWN"; break;};
++				     speed;}
++		   )) ;
++	DWC_PRINTF("  Max packet size: %d\n",
++		   usb_maxpacket(urb->dev, urb->pipe, usb_pipeout(urb->pipe)));
++	DWC_PRINTF("  Data buffer length: %d\n", urb->transfer_buffer_length);
++	DWC_PRINTF("  Transfer buffer: %p, Transfer DMA: %p\n",
++		   urb->transfer_buffer, (void *)urb->transfer_dma);
++	DWC_PRINTF("  Setup buffer: %p, Setup DMA: %p\n",
++		   urb->setup_packet, (void *)urb->setup_dma);
++	DWC_PRINTF("  Interval: %d\n", urb->interval);
++	if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
++		int i;
++		for (i = 0; i < urb->number_of_packets; i++) {
++			DWC_PRINTF("  ISO Desc %d:\n", i);
++			DWC_PRINTF("    offset: %d, length %d\n",
++				   urb->iso_frame_desc[i].offset,
++				   urb->iso_frame_desc[i].length);
++		}
++	}
++}
++#endif
++
++/** Starts processing a USB transfer request specified by a USB Request Block
++ * (URB). mem_flags indicates the type of memory allocation to use while
++ * processing this URB. */
++static int dwc_otg_urb_enqueue(struct usb_hcd *hcd,
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		       struct usb_host_endpoint *ep,
++#endif
++		       struct urb *urb, gfp_t mem_flags)
++{
++	int retval = 0;
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,28)
++	struct usb_host_endpoint *ep = urb->ep;
++#endif
++#if USB_URB_EP_LINKING
++	dwc_irqflags_t irqflags;
++#endif
++        void **ref_ep_hcpriv = &ep->hcpriv;
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	dwc_otg_hcd_urb_t *dwc_otg_urb;
++	int i;
++	int alloc_bandwidth = 0;
++	uint8_t ep_type = 0;
++	uint32_t flags = 0;
++	void *buf;
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_enqueue");
++	}
++#endif
++
++	if (!urb->transfer_buffer && urb->transfer_buffer_length)
++		return -EINVAL;
++
++	if ((usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS)
++	    || (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)) {
++		if (!dwc_otg_hcd_is_bandwidth_allocated
++		    (dwc_otg_hcd, ref_ep_hcpriv)) {
++			alloc_bandwidth = 1;
++		}
++	}
++
++	switch (usb_pipetype(urb->pipe)) {
++	case PIPE_CONTROL:
++		ep_type = USB_ENDPOINT_XFER_CONTROL;
++		break;
++	case PIPE_ISOCHRONOUS:
++		ep_type = USB_ENDPOINT_XFER_ISOC;
++		break;
++	case PIPE_BULK:
++		ep_type = USB_ENDPOINT_XFER_BULK;
++		break;
++	case PIPE_INTERRUPT:
++		ep_type = USB_ENDPOINT_XFER_INT;
++		break;
++	default:
++                DWC_WARN("Wrong EP type - %d\n", usb_pipetype(urb->pipe));
++	}
++
++        /* # of packets is often 0 - do we really need to call this then? */
++	dwc_otg_urb = dwc_otg_hcd_urb_alloc(dwc_otg_hcd,
++					    urb->number_of_packets,
++					    mem_flags == GFP_ATOMIC ? 1 : 0);
++
++	if(dwc_otg_urb == NULL)
++		return -ENOMEM;
++
++        urb->hcpriv = dwc_otg_urb;
++        if (!dwc_otg_urb && urb->number_of_packets)
++                return -ENOMEM;
++
++	dwc_otg_hcd_urb_set_pipeinfo(dwc_otg_urb, usb_pipedevice(urb->pipe),
++				     usb_pipeendpoint(urb->pipe), ep_type,
++				     usb_pipein(urb->pipe),
++				     usb_maxpacket(urb->dev, urb->pipe,
++						   !(usb_pipein(urb->pipe))));
++
++	buf = urb->transfer_buffer;
++	if (hcd->self.uses_dma) {
++		/*
++		 * Calculate virtual address from physical address,
++		 * because some class driver may not fill transfer_buffer.
++		 * In Buffer DMA mode virual address is used,
++		 * when handling non DWORD aligned buffers.
++		 */
++		//buf = phys_to_virt(urb->transfer_dma);
++                // DMA addresses are bus addresses not physical addresses!
++                buf = dma_to_virt(&urb->dev->dev, urb->transfer_dma);
++	}
++
++	if (!(urb->transfer_flags & URB_NO_INTERRUPT))
++		flags |= URB_GIVEBACK_ASAP;
++	if (urb->transfer_flags & URB_ZERO_PACKET)
++		flags |= URB_SEND_ZERO_PACKET;
++
++	dwc_otg_hcd_urb_set_params(dwc_otg_urb, urb, buf,
++				   urb->transfer_dma,
++				   urb->transfer_buffer_length,
++				   urb->setup_packet,
++				   urb->setup_dma, flags, urb->interval);
++
++	for (i = 0; i < urb->number_of_packets; ++i) {
++		dwc_otg_hcd_urb_set_iso_desc_params(dwc_otg_urb, i,
++						    urb->
++						    iso_frame_desc[i].offset,
++						    urb->
++						    iso_frame_desc[i].length);
++	}
++
++#if USB_URB_EP_LINKING
++        DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
++	retval = usb_hcd_link_urb_to_ep(hcd, urb);
++        DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
++	if (0 == retval)
++#endif
++        {
++                retval = dwc_otg_hcd_urb_enqueue(dwc_otg_hcd, dwc_otg_urb,
++                                                 /*(dwc_otg_qh_t **)*/
++                                                 ref_ep_hcpriv,
++                                                 mem_flags == GFP_ATOMIC ? 1 : 0);
++                if (0 == retval) {
++                        if (alloc_bandwidth) {
++                                allocate_bus_bandwidth(hcd,
++                                        dwc_otg_hcd_get_ep_bandwidth(
++                                                dwc_otg_hcd, *ref_ep_hcpriv),
++                                                       urb);
++                        }
++                } else {
++#if USB_URB_EP_LINKING
++			dwc_irqflags_t irqflags;
++                        DWC_DEBUGPL(DBG_HCD, "DWC OTG dwc_otg_hcd_urb_enqueue failed rc %d\n", retval);
++                        DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &irqflags);
++                        usb_hcd_unlink_urb_from_ep(hcd, urb);
++                        DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, irqflags);
++#endif
++                        if (retval == -DWC_E_NO_DEVICE) {
++                                retval = -ENODEV;
++                        }
++                }
++        }
++	return retval;
++}
++
++/** Aborts/cancels a USB transfer request. Always returns 0 to indicate
++ * success.  */
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb)
++#else
++static int dwc_otg_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
++#endif
++{
++	dwc_irqflags_t flags;
++	dwc_otg_hcd_t *dwc_otg_hcd;
++        int rc;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue\n");
++
++	dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++#ifdef DEBUG
++	if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++		dump_urb_info(urb, "dwc_otg_urb_dequeue");
++	}
++#endif
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	rc = usb_hcd_check_unlink_urb(hcd, urb, status);
++	if (0 == rc) {
++		if(urb->hcpriv != NULL) {
++	                dwc_otg_hcd_urb_dequeue(dwc_otg_hcd,
++	                                    (dwc_otg_hcd_urb_t *)urb->hcpriv);
++
++		        DWC_FREE(urb->hcpriv);
++			urb->hcpriv = NULL;
++		}
++        }
++
++        if (0 == rc) {
++		/* Higher layer software sets URB status. */
++#if USB_URB_EP_LINKING
++                usb_hcd_unlink_urb_from_ep(hcd, urb);
++#endif
++		DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++                usb_hcd_giveback_urb(hcd, urb);
++#else
++                usb_hcd_giveback_urb(hcd, urb, status);
++#endif
++                if (CHK_DEBUG_LEVEL(DBG_HCDV | DBG_HCD_URB)) {
++                        DWC_PRINTF("Called usb_hcd_giveback_urb() \n");
++                        DWC_PRINTF("  1urb->status = %d\n", urb->status);
++                }
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue OK\n");
++        } else {
++		DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++                DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD URB Dequeue failed - rc %d\n",
++                            rc);
++        }
++
++	return rc;
++}
++
++/* Frees resources in the DWC_otg controller related to a given endpoint. Also
++ * clears state in the HCD related to the endpoint. Any URBs for the endpoint
++ * must already be dequeued. */
++static void endpoint_disable(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	DWC_DEBUGPL(DBG_HCD,
++		    "DWC OTG HCD EP DISABLE: _bEndpointAddress=0x%02x, "
++		    "endpoint=%d\n", ep->desc.bEndpointAddress,
++		    dwc_ep_addr_to_endpoint(ep->desc.bEndpointAddress));
++	dwc_otg_hcd_endpoint_disable(dwc_otg_hcd, ep->hcpriv, 250);
++	ep->hcpriv = NULL;
++}
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30)
++/* Resets endpoint specific parameter values, in current version used to reset
++ * the data toggle(as a WA). This function can be called from usb_clear_halt routine */
++static void endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
++{
++	dwc_irqflags_t flags;
++	struct usb_device *udev = NULL;
++	int epnum = usb_endpoint_num(&ep->desc);
++	int is_out = usb_endpoint_dir_out(&ep->desc);
++	int is_control = usb_endpoint_xfer_control(&ep->desc);
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++        struct device *dev = DWC_OTG_OS_GETDEV(dwc_otg_hcd->otg_dev->os_dep);
++
++	if (dev)
++		udev = to_usb_device(dev);
++	else
++		return;
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD EP RESET: Endpoint Num=0x%02d\n", epnum);
++
++	DWC_SPINLOCK_IRQSAVE(dwc_otg_hcd->lock, &flags);
++	usb_settoggle(udev, epnum, is_out, 0);
++	if (is_control)
++		usb_settoggle(udev, epnum, !is_out, 0);
++
++	if (ep->hcpriv) {
++		dwc_otg_hcd_endpoint_reset(dwc_otg_hcd, ep->hcpriv);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(dwc_otg_hcd->lock, flags);
++}
++#endif
++
++/** Handles host mode interrupts for the DWC_otg controller. Returns IRQ_NONE if
++ * there was no interrupt to handle. Returns IRQ_HANDLED if there was a valid
++ * interrupt.
++ *
++ * This function is called by the USB core when an interrupt occurs */
++static irqreturn_t dwc_otg_hcd_irq(struct usb_hcd *hcd)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++	int32_t retval = dwc_otg_hcd_handle_intr(dwc_otg_hcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/** Creates Status Change bitmap for the root hub and root port. The bitmap is
++ * returned in buf. Bit 0 is the status change indicator for the root hub. Bit 1
++ * is the status change indicator for the single root port. Returns 1 if either
++ * change indicator is 1, otherwise returns 0. */
++int hub_status_data(struct usb_hcd *hcd, char *buf)
++{
++	dwc_otg_hcd_t *dwc_otg_hcd = hcd_to_dwc_otg_hcd(hcd);
++
++	buf[0] = 0;
++	buf[0] |= (dwc_otg_hcd_is_status_changed(dwc_otg_hcd, 1)) << 1;
++
++	return (buf[0] != 0);
++}
++
++/** Handles hub class-specific requests. */
++int hub_control(struct usb_hcd *hcd,
++		u16 typeReq, u16 wValue, u16 wIndex, char *buf, u16 wLength)
++{
++	int retval;
++
++	retval = dwc_otg_hcd_hub_control(hcd_to_dwc_otg_hcd(hcd),
++					 typeReq, wValue, wIndex, buf, wLength);
++
++	switch (retval) {
++	case -DWC_E_INVALID:
++		retval = -EINVAL;
++		break;
++	}
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+new file mode 100644
+index 0000000..9761566
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_hcd_queue.c
+@@ -0,0 +1,922 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_hcd_queue.c $
++ * $Revision: #44 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_DEVICE_ONLY
++
++/**
++ * @file
++ *
++ * This file contains the functions to manage Queue Heads and Queue
++ * Transfer Descriptors.
++ */
++
++#include "dwc_otg_hcd.h"
++#include "dwc_otg_regs.h"
++
++extern bool microframe_schedule;
++
++/**
++ * Free each QTD in the QH's QTD-list then free the QH.  QH should already be
++ * removed from a list.  QTD list should already be empty if called from URB
++ * Dequeue.
++ *
++ * @param hcd HCD instance.
++ * @param qh The QH to free.
++ */
++void dwc_otg_hcd_qh_free(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	dwc_otg_qtd_t *qtd, *qtd_tmp;
++
++	/* Free each QTD in the QTD list */
++	DWC_SPINLOCK(hcd->lock);
++	DWC_CIRCLEQ_FOREACH_SAFE(qtd, qtd_tmp, &qh->qtd_list, qtd_list_entry) {
++		DWC_CIRCLEQ_REMOVE(&qh->qtd_list, qtd, qtd_list_entry);
++		dwc_otg_hcd_qtd_free(qtd);
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		dwc_otg_hcd_qh_free_ddma(hcd, qh);
++	} else if (qh->dw_align_buf) {
++		uint32_t buf_size;
++		if (qh->ep_type == UE_ISOCHRONOUS) {
++			buf_size = 4096;
++		} else {
++			buf_size = hcd->core_if->core_params->max_transfer_size;
++		}
++		DWC_DMA_FREE(buf_size, qh->dw_align_buf, qh->dw_align_buf_dma);
++	}
++
++	DWC_FREE(qh);
++	DWC_SPINUNLOCK(hcd->lock);
++	return;
++}
++
++#define BitStuffTime(bytecount)  ((8 * 7* bytecount) / 6)
++#define HS_HOST_DELAY		5	/* nanoseconds */
++#define FS_LS_HOST_DELAY	1000	/* nanoseconds */
++#define HUB_LS_SETUP		333	/* nanoseconds */
++#define NS_TO_US(ns)		((ns + 500) / 1000)
++				/* convert & round nanoseconds to microseconds */
++
++static uint32_t calc_bus_time(int speed, int is_in, int is_isoc, int bytecount)
++{
++	unsigned long retval;
++
++	switch (speed) {
++	case USB_SPEED_HIGH:
++		if (is_isoc) {
++			retval =
++			    ((38 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		} else {
++			retval =
++			    ((55 * 8 * 2083) +
++			     (2083 * (3 + BitStuffTime(bytecount)))) / 1000 +
++			    HS_HOST_DELAY;
++		}
++		break;
++	case USB_SPEED_FULL:
++		if (is_isoc) {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			if (is_in) {
++				retval = 7268 + FS_LS_HOST_DELAY + retval;
++			} else {
++				retval = 6265 + FS_LS_HOST_DELAY + retval;
++			}
++		} else {
++			retval =
++			    (8354 * (31 + 10 * BitStuffTime(bytecount))) / 1000;
++			retval = 9107 + FS_LS_HOST_DELAY + retval;
++		}
++		break;
++	case USB_SPEED_LOW:
++		if (is_in) {
++			retval =
++			    (67667 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64060 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		} else {
++			retval =
++			    (66700 * (31 + 10 * BitStuffTime(bytecount))) /
++			    1000;
++			retval =
++			    64107 + (2 * HUB_LS_SETUP) + FS_LS_HOST_DELAY +
++			    retval;
++		}
++		break;
++	default:
++		DWC_WARN("Unknown device speed\n");
++		retval = -1;
++	}
++
++	return NS_TO_US(retval);
++}
++
++/**
++ * Initializes a QH structure.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh  The QH to init.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH.
++ */
++#define SCHEDULE_SLOP 10
++void qh_init(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh, dwc_otg_hcd_urb_t * urb)
++{
++	char *speed, *type;
++	int dev_speed;
++	uint32_t hub_addr, hub_port;
++
++	dwc_memset(qh, 0, sizeof(dwc_otg_qh_t));
++
++	/* Initialize QH */
++	qh->ep_type = dwc_otg_hcd_get_pipe_type(&urb->pipe_info);
++	qh->ep_is_in = dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? 1 : 0;
++
++	qh->data_toggle = DWC_OTG_HC_PID_DATA0;
++	qh->maxp = dwc_otg_hcd_get_mps(&urb->pipe_info);
++	DWC_CIRCLEQ_INIT(&qh->qtd_list);
++	DWC_LIST_INIT(&qh->qh_list_entry);
++	qh->channel = NULL;
++
++	/* FS/LS Enpoint on HS Hub
++	 * NOT virtual root hub */
++	dev_speed = hcd->fops->speed(hcd, urb->priv);
++
++	hcd->fops->hub_info(hcd, urb->priv, &hub_addr, &hub_port);
++	qh->do_split = 0;
++	if (microframe_schedule)
++		qh->speed = dev_speed;
++
++
++	if (((dev_speed == USB_SPEED_LOW) ||
++	     (dev_speed == USB_SPEED_FULL)) &&
++	    (hub_addr != 0 && hub_addr != 1)) {
++		DWC_DEBUGPL(DBG_HCD,
++			    "QH init: EP %d: TT found at hub addr %d, for port %d\n",
++			    dwc_otg_hcd_get_ep_num(&urb->pipe_info), hub_addr,
++			    hub_port);
++		qh->do_split = 1;
++	}
++
++	if (qh->ep_type == UE_INTERRUPT || qh->ep_type == UE_ISOCHRONOUS) {
++		/* Compute scheduling parameters once and save them. */
++		hprt0_data_t hprt;
++
++		/** @todo Account for split transfers in the bus time. */
++		int bytecount =
++		    dwc_hb_mult(qh->maxp) * dwc_max_packet(qh->maxp);
++
++		qh->usecs =
++		    calc_bus_time((qh->do_split ? USB_SPEED_HIGH : dev_speed),
++				  qh->ep_is_in, (qh->ep_type == UE_ISOCHRONOUS),
++				  bytecount);
++		/* Start in a slightly future (micro)frame. */
++		qh->sched_frame = dwc_frame_num_inc(hcd->frame_number,
++						    SCHEDULE_SLOP);
++		qh->interval = urb->interval;
++
++#if 0
++		/* Increase interrupt polling rate for debugging. */
++		if (qh->ep_type == UE_INTERRUPT) {
++			qh->interval = 8;
++		}
++#endif
++		hprt.d32 = DWC_READ_REG32(hcd->core_if->host_if->hprt0);
++		if ((hprt.b.prtspd == DWC_HPRT0_PRTSPD_HIGH_SPEED) &&
++		    ((dev_speed == USB_SPEED_LOW) ||
++		     (dev_speed == USB_SPEED_FULL))) {
++			qh->interval *= 8;
++			qh->sched_frame |= 0x7;
++			qh->start_split_frame = qh->sched_frame;
++		}
++
++	}
++
++	DWC_DEBUGPL(DBG_HCD, "DWC OTG HCD QH Initialized\n");
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - qh = %p\n", qh);
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Device Address = %d\n",
++		    dwc_otg_hcd_get_dev_addr(&urb->pipe_info));
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Endpoint %d, %s\n",
++		    dwc_otg_hcd_get_ep_num(&urb->pipe_info),
++		    dwc_otg_hcd_is_pipe_in(&urb->pipe_info) ? "IN" : "OUT");
++	switch (dev_speed) {
++	case USB_SPEED_LOW:
++		qh->dev_speed = DWC_OTG_EP_SPEED_LOW;
++		speed = "low";
++		break;
++	case USB_SPEED_FULL:
++		qh->dev_speed = DWC_OTG_EP_SPEED_FULL;
++		speed = "full";
++		break;
++	case USB_SPEED_HIGH:
++		qh->dev_speed = DWC_OTG_EP_SPEED_HIGH;
++		speed = "high";
++		break;
++	default:
++		speed = "?";
++		break;
++	}
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Speed = %s\n", speed);
++
++	switch (qh->ep_type) {
++	case UE_ISOCHRONOUS:
++		type = "isochronous";
++		break;
++	case UE_INTERRUPT:
++		type = "interrupt";
++		break;
++	case UE_CONTROL:
++		type = "control";
++		break;
++	case UE_BULK:
++		type = "bulk";
++		break;
++	default:
++		type = "?";
++		break;
++	}
++
++	DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH  - Type = %s\n", type);
++
++#ifdef DEBUG
++	if (qh->ep_type == UE_INTERRUPT) {
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - usecs = %d\n",
++			    qh->usecs);
++		DWC_DEBUGPL(DBG_HCDV, "DWC OTG HCD QH - interval = %d\n",
++			    qh->interval);
++	}
++#endif
++
++}
++
++/**
++ * This function allocates and initializes a QH.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param urb Holds the information about the device/endpoint that we need
++ * 	      to initialize the QH.
++ * @param atomic_alloc Flag to do atomic allocation if needed
++ *
++ * @return Returns pointer to the newly allocated QH, or NULL on error. */
++dwc_otg_qh_t *dwc_otg_hcd_qh_create(dwc_otg_hcd_t * hcd,
++				    dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qh_t *qh;
++
++	/* Allocate memory */
++	/** @todo add memflags argument */
++	qh = dwc_otg_hcd_qh_alloc(atomic_alloc);
++	if (qh == NULL) {
++		DWC_ERROR("qh allocation failed");
++		return NULL;
++	}
++
++	qh_init(hcd, qh, urb);
++
++	if (hcd->core_if->dma_desc_enable
++	    && (dwc_otg_hcd_qh_init_ddma(hcd, qh) < 0)) {
++		dwc_otg_hcd_qh_free(hcd, qh);
++		return NULL;
++	}
++
++	return qh;
++}
++
++/* microframe_schedule=0 start */
++
++/**
++ * Checks that a channel is available for a periodic transfer.
++ *
++ * @return 0 if successful, negative error code otherise.
++ */
++static int periodic_channel_available(dwc_otg_hcd_t * hcd)
++{
++	/*
++	 * Currently assuming that there is a dedicated host channnel for each
++	 * periodic transaction plus at least one host channel for
++	 * non-periodic transactions.
++	 */
++	int status;
++	int num_channels;
++
++	num_channels = hcd->core_if->core_params->host_channels;
++	if ((hcd->periodic_channels + hcd->non_periodic_channels < num_channels)
++	    && (hcd->periodic_channels < num_channels - 1)) {
++		status = 0;
++	} else {
++		DWC_INFO("%s: Total channels: %d, Periodic: %d, Non-periodic: %d\n",
++			__func__, num_channels, hcd->periodic_channels, hcd->non_periodic_channels);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/**
++ * Checks that there is sufficient bandwidth for the specified QH in the
++ * periodic schedule. For simplicity, this calculation assumes that all the
++ * transfers in the periodic schedule may occur in the same (micro)frame.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH containing periodic bandwidth required.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_periodic_bandwidth(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	int16_t max_claimed_usecs;
++
++	status = 0;
++
++	if ((qh->dev_speed == DWC_OTG_EP_SPEED_HIGH) || qh->do_split) {
++		/*
++		 * High speed mode.
++		 * Max periodic usecs is 80% x 125 usec = 100 usec.
++		 */
++
++		max_claimed_usecs = 100 - qh->usecs;
++	} else {
++		/*
++		 * Full speed mode.
++		 * Max periodic usecs is 90% x 1000 usec = 900 usec.
++		 */
++		max_claimed_usecs = 900 - qh->usecs;
++	}
++
++	if (hcd->periodic_usecs > max_claimed_usecs) {
++		DWC_INFO("%s: already claimed usecs %d, required usecs %d\n", __func__, hcd->periodic_usecs, qh->usecs);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/* microframe_schedule=0 end */
++
++/**
++ * Microframe scheduler
++ * track the total use in hcd->frame_usecs
++ * keep each qh use in qh->frame_usecs
++ * when surrendering the qh then donate the time back
++ */
++const unsigned short max_uframe_usecs[]={ 100, 100, 100, 100, 100, 100, 30, 0 };
++
++/*
++ * called from dwc_otg_hcd.c:dwc_otg_hcd_init
++ */
++int init_hcd_usecs(dwc_otg_hcd_t *_hcd)
++{
++	int i;
++	for (i=0; i<8; i++) {
++		_hcd->frame_usecs[i] = max_uframe_usecs[i];
++	}
++	return 0;
++}
++
++static int find_single_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++	while (done == 0) {
++		/* At the start _hcd->frame_usecs[i] = max_uframe_usecs[i]; */
++		if (utime <= _hcd->frame_usecs[i]) {
++			_hcd->frame_usecs[i] -= utime;
++			_qh->frame_usecs[i] += utime;
++			t_left -= utime;
++			ret = i;
++			done = 1;
++			return ret;
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++ }
++
++/*
++ * use this for FS apps that can span multiple uframes
++  */
++static int find_multi_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int i;
++	int j;
++	unsigned short utime;
++	int t_left;
++	int ret;
++	int done;
++	unsigned short xtime;
++
++	ret = -1;
++	utime = _qh->usecs;
++	t_left = utime;
++	i = 0;
++	done = 0;
++loop:
++	while (done == 0) {
++		if(_hcd->frame_usecs[i] <= 0) {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++			goto loop;
++		}
++
++		/*
++		 * we need n consecutive slots
++		 * so use j as a start slot j plus j+1 must be enough time (for now)
++		 */
++		xtime= _hcd->frame_usecs[i];
++		for (j = i+1 ; j < 8 ; j++ ) {
++                       /*
++                        * if we add this frame remaining time to xtime we may
++                        * be OK, if not we need to test j for a complete frame
++                        */
++                       if ((xtime+_hcd->frame_usecs[j]) < utime) {
++                               if (_hcd->frame_usecs[j] < max_uframe_usecs[j]) {
++                                       j = 8;
++                                       ret = -1;
++                                       continue;
++                               }
++                       }
++                       if (xtime >= utime) {
++                               ret = i;
++                               j = 8;  /* stop loop with a good value ret */
++                               continue;
++                       }
++                       /* add the frame time to x time */
++                       xtime += _hcd->frame_usecs[j];
++		       /* we must have a fully available next frame or break */
++		       if ((xtime < utime)
++				       && (_hcd->frame_usecs[j] == max_uframe_usecs[j])) {
++			       ret = -1;
++			       j = 8;  /* stop loop with a bad value ret */
++			       continue;
++		       }
++		}
++		if (ret >= 0) {
++			t_left = utime;
++			for (j = i; (t_left>0) && (j < 8); j++ ) {
++				t_left -= _hcd->frame_usecs[j];
++				if ( t_left <= 0 ) {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j] + t_left;
++					_hcd->frame_usecs[j]= -t_left;
++					ret = i;
++					done = 1;
++				} else {
++					_qh->frame_usecs[j] += _hcd->frame_usecs[j];
++					_hcd->frame_usecs[j] = 0;
++				}
++			}
++		} else {
++			i++;
++			if (i == 8) {
++				done = 1;
++				ret = -1;
++			}
++		}
++	}
++	return ret;
++}
++
++static int find_uframe(dwc_otg_hcd_t * _hcd, dwc_otg_qh_t * _qh)
++{
++	int ret;
++	ret = -1;
++
++	if (_qh->speed == USB_SPEED_HIGH) {
++		/* if this is a hs transaction we need a full frame */
++		ret = find_single_uframe(_hcd, _qh);
++	} else {
++		/* if this is a fs transaction we may need a sequence of frames */
++		ret = find_multi_uframe(_hcd, _qh);
++	}
++	return ret;
++}
++
++/**
++ * Checks that the max transfer size allowed in a host channel is large enough
++ * to handle the maximum data transfer in a single (micro)frame for a periodic
++ * transfer.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for a periodic endpoint.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int check_max_xfer_size(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status;
++	uint32_t max_xfer_size;
++	uint32_t max_channel_xfer_size;
++
++	status = 0;
++
++	max_xfer_size = dwc_max_packet(qh->maxp) * dwc_hb_mult(qh->maxp);
++	max_channel_xfer_size = hcd->core_if->core_params->max_transfer_size;
++
++	if (max_xfer_size > max_channel_xfer_size) {
++		DWC_INFO("%s: Periodic xfer length %d > " "max xfer length for channel %d\n",
++				__func__, max_xfer_size, max_channel_xfer_size);	//NOTICE
++		status = -DWC_E_NO_SPACE;
++	}
++
++	return status;
++}
++
++/**
++ * Schedules an interrupt or isochronous transfer in the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer. The QH should already contain the
++ * scheduling information.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++static int schedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++
++	if (microframe_schedule) {
++		int frame;
++		status = find_uframe(hcd, qh);
++		frame = -1;
++		if (status == 0) {
++			frame = 7;
++		} else {
++			if (status > 0 )
++				frame = status-1;
++		}
++
++		/* Set the new frame up */
++		if (frame > -1) {
++			qh->sched_frame &= ~0x7;
++			qh->sched_frame |= (frame & 7);
++		}
++
++		if (status != -1)
++			status = 0;
++	} else {
++		status = periodic_channel_available(hcd);
++		if (status) {
++			DWC_INFO("%s: No host channel available for periodic " "transfer.\n", __func__);	//NOTICE
++			return status;
++		}
++
++		status = check_periodic_bandwidth(hcd, qh);
++	}
++	if (status) {
++		DWC_INFO("%s: Insufficient periodic bandwidth for "
++			    "periodic transfer.\n", __func__);
++		return status;
++	}
++	status = check_max_xfer_size(hcd, qh);
++	if (status) {
++		DWC_INFO("%s: Channel max transfer size too small "
++			    "for periodic transfer.\n", __func__);
++		return status;
++	}
++
++	if (hcd->core_if->dma_desc_enable) {
++		/* Don't rely on SOF and start in ready schedule */
++		DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_ready, &qh->qh_list_entry);
++	}
++	else {
++	/* Always start in the inactive schedule. */
++	DWC_LIST_INSERT_TAIL(&hcd->periodic_sched_inactive, &qh->qh_list_entry);
++	}
++
++	if (!microframe_schedule) {
++		/* Reserve the periodic channel. */
++		hcd->periodic_channels++;
++	}
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs += qh->usecs;
++
++	return status;
++}
++
++/**
++ * This function adds a QH to either the non periodic or periodic schedule if
++ * it is not already in the schedule. If the QH is already in the schedule, no
++ * action is taken.
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qh_add(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int status = 0;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH already in a schedule. */
++		return status;
++	}
++
++	/* Add the new QH to the appropriate schedule */
++	if (dwc_qh_is_non_per(qh)) {
++		/* Always start in the inactive schedule. */
++		DWC_LIST_INSERT_TAIL(&hcd->non_periodic_sched_inactive,
++				     &qh->qh_list_entry);
++	} else {
++		status = schedule_periodic(hcd, qh);
++		if ( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++			DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++								intr_mask.d32, intr_mask.d32);
++		}
++		hcd->periodic_qh_count++;
++	}
++
++	return status;
++}
++
++/**
++ * Removes an interrupt or isochronous transfer from the periodic schedule.
++ *
++ * @param hcd The HCD state structure for the DWC OTG controller.
++ * @param qh QH for the periodic transfer.
++ */
++static void deschedule_periodic(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	int i;
++	DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++
++	/* Update claimed usecs per (micro)frame. */
++	hcd->periodic_usecs -= qh->usecs;
++
++	if (!microframe_schedule) {
++		/* Release the periodic channel reservation. */
++		hcd->periodic_channels--;
++	} else {
++		for (i = 0; i < 8; i++) {
++			hcd->frame_usecs[i] += qh->frame_usecs[i];
++			qh->frame_usecs[i] = 0;
++		}
++	}
++}
++
++/**
++ * Removes a QH from either the non-periodic or periodic schedule.  Memory is
++ * not freed.
++ *
++ * @param hcd The HCD state structure.
++ * @param qh QH to remove from schedule. */
++void dwc_otg_hcd_qh_remove(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (DWC_LIST_EMPTY(&qh->qh_list_entry)) {
++		/* QH is not in a schedule. */
++		return;
++	}
++
++	if (dwc_qh_is_non_per(qh)) {
++		if (hcd->non_periodic_qh_ptr == &qh->qh_list_entry) {
++			hcd->non_periodic_qh_ptr =
++			    hcd->non_periodic_qh_ptr->next;
++		}
++		DWC_LIST_REMOVE_INIT(&qh->qh_list_entry);
++	} else {
++		deschedule_periodic(hcd, qh);
++		hcd->periodic_qh_count--;
++		if( !hcd->periodic_qh_count ) {
++			intr_mask.b.sofintr = 1;
++				DWC_MODIFY_REG32(&hcd->core_if->core_global_regs->gintmsk,
++									intr_mask.d32, 0);
++		}
++	}
++}
++
++/**
++ * Deactivates a QH. For non-periodic QHs, removes the QH from the active
++ * non-periodic schedule. The QH is added to the inactive non-periodic
++ * schedule if any QTDs are still attached to the QH.
++ *
++ * For periodic QHs, the QH is removed from the periodic queued schedule. If
++ * there are any QTDs still attached to the QH, the QH is added to either the
++ * periodic inactive schedule or the periodic ready schedule and its next
++ * scheduled frame is calculated. The QH is placed in the ready schedule if
++ * the scheduled frame has been reached already. Otherwise it's placed in the
++ * inactive schedule. If there are no QTDs attached to the QH, the QH is
++ * completely removed from the periodic schedule.
++ */
++void dwc_otg_hcd_qh_deactivate(dwc_otg_hcd_t * hcd, dwc_otg_qh_t * qh,
++			       int sched_next_periodic_split)
++{
++	if (dwc_qh_is_non_per(qh)) {
++		dwc_otg_hcd_qh_remove(hcd, qh);
++		if (!DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			/* Add back to inactive non-periodic schedule. */
++			dwc_otg_hcd_qh_add(hcd, qh);
++		}
++	} else {
++		uint16_t frame_number = dwc_otg_hcd_get_frame_number(hcd);
++
++		if (qh->do_split) {
++			/* Schedule the next continuing periodic split transfer */
++			if (sched_next_periodic_split) {
++
++				qh->sched_frame = frame_number;
++				if (dwc_frame_num_le(frame_number,
++						     dwc_frame_num_inc
++						     (qh->start_split_frame,
++						      1))) {
++					/*
++					 * Allow one frame to elapse after start
++					 * split microframe before scheduling
++					 * complete split, but DONT if we are
++					 * doing the next start split in the
++					 * same frame for an ISOC out.
++					 */
++					if ((qh->ep_type != UE_ISOCHRONOUS) ||
++					    (qh->ep_is_in != 0)) {
++						qh->sched_frame =
++						    dwc_frame_num_inc(qh->sched_frame, 1);
++					}
++				}
++			} else {
++				qh->sched_frame =
++				    dwc_frame_num_inc(qh->start_split_frame,
++						      qh->interval);
++				if (dwc_frame_num_le
++				    (qh->sched_frame, frame_number)) {
++					qh->sched_frame = frame_number;
++				}
++				qh->sched_frame |= 0x7;
++				qh->start_split_frame = qh->sched_frame;
++			}
++		} else {
++			qh->sched_frame =
++			    dwc_frame_num_inc(qh->sched_frame, qh->interval);
++			if (dwc_frame_num_le(qh->sched_frame, frame_number)) {
++				qh->sched_frame = frame_number;
++			}
++		}
++
++		if (DWC_CIRCLEQ_EMPTY(&qh->qtd_list)) {
++			dwc_otg_hcd_qh_remove(hcd, qh);
++		} else {
++			/*
++			 * Remove from periodic_sched_queued and move to
++			 * appropriate queue.
++			 */
++			if ((microframe_schedule && dwc_frame_num_le(qh->sched_frame, frame_number)) ||
++			(!microframe_schedule && qh->sched_frame == frame_number)) {
++				DWC_LIST_MOVE_HEAD(&hcd->periodic_sched_ready,
++						   &qh->qh_list_entry);
++			} else {
++				DWC_LIST_MOVE_HEAD
++				    (&hcd->periodic_sched_inactive,
++				     &qh->qh_list_entry);
++			}
++		}
++	}
++}
++
++/**
++ * This function allocates and initializes a QTD.
++ *
++ * @param urb The URB to create a QTD from.  Each URB-QTD pair will end up
++ * 	      pointing to each other so each pair should have a unique correlation.
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return Returns pointer to the newly allocated QTD, or NULL on error. */
++dwc_otg_qtd_t *dwc_otg_hcd_qtd_create(dwc_otg_hcd_urb_t * urb, int atomic_alloc)
++{
++	dwc_otg_qtd_t *qtd;
++
++	qtd = dwc_otg_hcd_qtd_alloc(atomic_alloc);
++	if (qtd == NULL) {
++		return NULL;
++	}
++
++	dwc_otg_hcd_qtd_init(qtd, urb);
++	return qtd;
++}
++
++/**
++ * Initializes a QTD structure.
++ *
++ * @param qtd The QTD to initialize.
++ * @param urb The URB to use for initialization.  */
++void dwc_otg_hcd_qtd_init(dwc_otg_qtd_t * qtd, dwc_otg_hcd_urb_t * urb)
++{
++	dwc_memset(qtd, 0, sizeof(dwc_otg_qtd_t));
++	qtd->urb = urb;
++	if (dwc_otg_hcd_get_pipe_type(&urb->pipe_info) == UE_CONTROL) {
++		/*
++		 * The only time the QTD data toggle is used is on the data
++		 * phase of control transfers. This phase always starts with
++		 * DATA1.
++		 */
++		qtd->data_toggle = DWC_OTG_HC_PID_DATA1;
++		qtd->control_phase = DWC_OTG_CONTROL_SETUP;
++	}
++
++	/* start split */
++	qtd->complete_split = 0;
++	qtd->isoc_split_pos = DWC_HCSPLIT_XACTPOS_ALL;
++	qtd->isoc_split_offset = 0;
++	qtd->in_process = 0;
++
++	/* Store the qtd ptr in the urb to reference what QTD. */
++	urb->qtd = qtd;
++	return;
++}
++
++/**
++ * This function adds a QTD to the QTD-list of a QH.  It will find the correct
++ * QH to place the QTD into.  If it does not find a QH, then it will create a
++ * new QH. If the QH to which the QTD is added is not currently scheduled, it
++ * is placed into the proper schedule based on its EP type.
++ *
++ * @param[in] qtd The QTD to add
++ * @param[in] hcd The DWC HCD structure
++ * @param[out] qh out parameter to return queue head
++ * @param atomic_alloc Flag to do atomic alloc if needed
++ *
++ * @return 0 if successful, negative error code otherwise.
++ */
++int dwc_otg_hcd_qtd_add(dwc_otg_qtd_t * qtd,
++			dwc_otg_hcd_t * hcd, dwc_otg_qh_t ** qh, int atomic_alloc)
++{
++	int retval = 0;
++	dwc_irqflags_t flags;
++
++	dwc_otg_hcd_urb_t *urb = qtd->urb;
++
++	/*
++	 * Get the QH which holds the QTD-list to insert to. Create QH if it
++	 * doesn't exist.
++	 */
++	if (*qh == NULL) {
++		*qh = dwc_otg_hcd_qh_create(hcd, urb, atomic_alloc);
++		if (*qh == NULL) {
++			retval = -1;
++			goto done;
++		}
++	}
++	DWC_SPINLOCK_IRQSAVE(hcd->lock, &flags);
++	retval = dwc_otg_hcd_qh_add(hcd, *qh);
++	if (retval == 0) {
++		DWC_CIRCLEQ_INSERT_TAIL(&((*qh)->qtd_list), qtd,
++					qtd_list_entry);
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(hcd->lock, flags);
++
++done:
++
++	return retval;
++}
++
++#endif /* DWC_DEVICE_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+new file mode 100644
+index 0000000..e46d9bb
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_os_dep.h
+@@ -0,0 +1,185 @@
++#ifndef _DWC_OS_DEP_H_
++#define _DWC_OS_DEP_H_
++
++/**
++ * @file
++ *
++ * This file contains OS dependent structures.
++ *
++ */
++
++#include <linux/kernel.h>
++#include <linux/module.h>
++#include <linux/moduleparam.h>
++#include <linux/init.h>
++#include <linux/device.h>
++#include <linux/errno.h>
++#include <linux/types.h>
++#include <linux/slab.h>
++#include <linux/list.h>
++#include <linux/interrupt.h>
++#include <linux/ctype.h>
++#include <linux/string.h>
++#include <linux/dma-mapping.h>
++#include <linux/jiffies.h>
++#include <linux/delay.h>
++#include <linux/timer.h>
++#include <linux/workqueue.h>
++#include <linux/stat.h>
++#include <linux/pci.h>
++
++#include <linux/version.h>
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20)
++# include <linux/irq.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,21)
++# include <linux/usb/ch9.h>
++#else
++# include <linux/usb_ch9.h>
++#endif
++
++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,24)
++# include <linux/usb/gadget.h>
++#else
++# include <linux/usb_gadget.h>
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,20)
++# include <asm/irq.h>
++#endif
++
++#ifdef PCI_INTERFACE
++# include <asm/io.h>
++#endif
++
++#ifdef LM_INTERFACE
++# include <asm/unaligned.h>
++# include <asm/sizes.h>
++# include <asm/param.h>
++# include <asm/io.h>
++# if (LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30))
++#  include <asm/arch/hardware.h>
++#  include <asm/arch/lm.h>
++#  include <asm/arch/irqs.h>
++#  include <asm/arch/regs-irq.h>
++# else
++/* in 2.6.31, at least, we seem to have lost the generic LM infrastructure -
++   here we assume that the machine architecture provides definitions
++   in its own header
++*/
++#  include <mach/lm.h>
++#  include <mach/hardware.h>
++# endif
++#endif
++
++#ifdef PLATFORM_INTERFACE
++#include <linux/platform_device.h>
++#include <asm/mach/map.h>
++#endif
++
++/** The OS page size */
++#define DWC_OS_PAGE_SIZE	PAGE_SIZE
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,14)
++typedef int gfp_t;
++#endif
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,18)
++# define IRQF_SHARED SA_SHIRQ
++#endif
++
++typedef struct os_dependent {
++	/** Base address returned from ioremap() */
++	void *base;
++
++	/** Register offset for Diagnostic API */
++	uint32_t reg_offset;
++
++#ifdef LM_INTERFACE
++	struct lm_device *lmdev;
++#elif  defined(PCI_INTERFACE)
++	struct pci_dev *pcidev;
++
++	/** Start address of a PCI region */
++	resource_size_t rsrc_start;
++
++	/** Length address of a PCI region */
++	resource_size_t rsrc_len;
++#elif  defined(PLATFORM_INTERFACE)
++	struct platform_device *platformdev;
++#endif
++
++} os_dependent_t;
++
++#ifdef __cplusplus
++}
++#endif
++
++
++
++/* Type for the our device on the chosen bus */
++#if   defined(LM_INTERFACE)
++typedef struct lm_device       dwc_bus_dev_t;
++#elif defined(PCI_INTERFACE)
++typedef struct pci_dev         dwc_bus_dev_t;
++#elif defined(PLATFORM_INTERFACE)
++typedef struct platform_device dwc_bus_dev_t;
++#endif
++
++/* Helper macro to retrieve drvdata from the device on the chosen bus */
++#if    defined(LM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) lm_get_drvdata(_dev)
++#elif  defined(PCI_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) pci_get_drvdata(_dev)
++#elif  defined(PLATFORM_INTERFACE)
++#define DWC_OTG_BUSDRVDATA(_dev) platform_get_drvdata(_dev)
++#endif
++
++/**
++ * Helper macro returning the otg_device structure of a given struct device
++ *
++ * c.f. static dwc_otg_device_t *dwc_otg_drvdev(struct device *_dev)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct lm_device *lm_dev = \
++                        container_of(_dev, struct lm_device, dev); \
++                _var = lm_get_drvdata(lm_dev); \
++        } while (0)
++
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                _var = dev_get_drvdata(_dev); \
++        } while (0)
++
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_GETDRVDEV(_var, _dev) do { \
++                struct platform_device *platform_dev = \
++                        container_of(_dev, struct platform_device, dev); \
++                _var = platform_get_drvdata(platform_dev); \
++        } while (0)
++#endif
++
++
++/**
++ * Helper macro returning the struct dev of the given struct os_dependent
++ *
++ * c.f. static struct device *dwc_otg_getdev(struct os_dependent *osdep)
++ */
++#ifdef LM_INTERFACE
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).lmdev == NULL? NULL: &(_osdep).lmdev->dev)
++#elif defined(PCI_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).pci_dev == NULL? NULL: &(_osdep).pci_dev->dev)
++#elif defined(PLATFORM_INTERFACE)
++#define DWC_OTG_OS_GETDEV(_osdep) \
++        ((_osdep).platformdev == NULL? NULL: &(_osdep).platformdev->dev)
++#endif
++
++
++
++
++#endif /* _DWC_OS_DEP_H_ */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
+new file mode 100644
+index 0000000..40fb25c
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.c
+@@ -0,0 +1,2708 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.c $
++ * $Revision: #101 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements PCD Core. All code in this file is portable and doesn't
++ * use any OS specific functions.
++ * PCD Core provides Interface, defined in <code><dwc_otg_pcd_if.h></code>
++ * header file, which can be used to implement OS specific PCD interface.
++ *
++ * An important function of the PCD is managing interrupts generated
++ * by the DWC_otg controller. The implementation of the DWC_otg device
++ * mode interrupt service routines is in dwc_otg_pcd_intr.c.
++ *
++ * @todo Add Device Mode test modes (Test J mode, Test K mode, etc).
++ * @todo Does it work when the request size is greater than DEPTSIZ
++ * transfer size
++ *
++ */
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++
++extern int init_cfi(cfiobject_t * cfiobj);
++#endif
++
++/**
++ * Choose endpoint from ep arrays using usb_ep structure.
++ */
++static dwc_otg_pcd_ep_t *get_ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/**
++ * This function completes a request.  It call's the request call back.
++ */
++void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req,
++			  int32_t status)
++{
++	unsigned stopped = ep->stopped;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(ep %p req %p)\n", __func__, ep, req);
++	DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++
++	/* don't modify queue heads during completion callback */
++	ep->stopped = 1;
++	/* spin_unlock/spin_lock now done in fops->complete() */
++	ep->pcd->fops->complete(ep->pcd, ep->priv, req->priv, status,
++				req->actual);
++
++	if (ep->pcd->request_pending > 0) {
++		--ep->pcd->request_pending;
++	}
++
++	ep->stopped = stopped;
++	DWC_FREE(req);
++}
++
++/**
++ * This function terminates all the requsts in the EP request queue.
++ */
++void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req;
++
++	ep->stopped = 1;
++
++	/* called with irqs blocked?? */
++	while (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		dwc_otg_request_done(ep, req, -DWC_E_SHUTDOWN);
++	}
++}
++
++void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++		       const struct dwc_otg_pcd_function_ops *fops)
++{
++	pcd->fops = fops;
++}
++
++/**
++ * PCD Callback function for initializing the PCD when switching to
++ * device mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_start_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	/*
++	 * Initialized the Core for Device mode.
++	 */
++	if (dwc_otg_is_device_mode(core_if)) {
++		dwc_otg_core_dev_init(core_if);
++		/* Set core_if's lock pointer to the pcd->lock */
++		core_if->lock = pcd->lock;
++	}
++	return 1;
++}
++
++/** CFI-specific buffer allocation function for EP */
++#ifdef DWC_UTE_CFI
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags)
++{
++	dwc_otg_pcd_ep_t *ep;
++	ep = get_ep_from_handle(pcd, pep);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	return pcd->cfi->ops.ep_alloc_buf(pcd->cfi, pcd, ep, addr, buflen,
++					  flags);
++}
++#else
++uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep, dwc_dma_t * addr,
++			      size_t buflen, int flags);
++#endif
++
++/**
++ * PCD Callback function for notifying the PCD when resuming from
++ * suspend.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_resume_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->resume) {
++		pcd->fops->resume(pcd);
++	}
++
++	/* Stop the SRP timeout timer. */
++	if ((GET_CORE_IF(pcd)->core_params->phy_type != DWC_PHY_TYPE_PARAM_FS)
++	    || (!GET_CORE_IF(pcd)->core_params->i2c_enable)) {
++		if (GET_CORE_IF(pcd)->srp_timer_started) {
++			GET_CORE_IF(pcd)->srp_timer_started = 0;
++			DWC_TIMER_CANCEL(GET_CORE_IF(pcd)->srp_timer);
++		}
++	}
++	return 1;
++}
++
++/**
++ * PCD Callback function for notifying the PCD device is suspended.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_suspend_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++
++	if (pcd->fops->suspend) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->suspend(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++
++	return 1;
++}
++
++/**
++ * PCD Callback function for stopping the PCD when switching to Host
++ * mode.
++ *
++ * @param p void pointer to the <code>dwc_otg_pcd_t</code>
++ */
++static int32_t dwc_otg_pcd_stop_cb(void *p)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) p;
++	extern void dwc_otg_pcd_stop(dwc_otg_pcd_t * _pcd);
++
++	dwc_otg_pcd_stop(pcd);
++	return 1;
++}
++
++/**
++ * PCD Callback structure for handling mode switching.
++ */
++static dwc_otg_cil_callbacks_t pcd_callbacks = {
++	.start = dwc_otg_pcd_start_cb,
++	.stop = dwc_otg_pcd_stop_cb,
++	.suspend = dwc_otg_pcd_suspend_cb,
++	.resume_wakeup = dwc_otg_pcd_resume_cb,
++	.p = 0,			/* Set at registration */
++};
++
++/**
++ * This function allocates a DMA Descriptor chain for the Endpoint
++ * buffer to be used for a transfer to/from the specified endpoint.
++ */
++dwc_otg_dev_dma_desc_t *dwc_otg_ep_alloc_desc_chain(dwc_dma_t * dma_desc_addr,
++						    uint32_t count)
++{
++	return DWC_DMA_ALLOC_ATOMIC(count * sizeof(dwc_otg_dev_dma_desc_t),
++							dma_desc_addr);
++}
++
++/**
++ * This function frees a DMA Descriptor chain that was allocated by ep_alloc_desc.
++ */
++void dwc_otg_ep_free_desc_chain(dwc_otg_dev_dma_desc_t * desc_addr,
++				uint32_t dma_desc_addr, uint32_t count)
++{
++	DWC_DMA_FREE(count * sizeof(dwc_otg_dev_dma_desc_t), desc_addr,
++		     dma_desc_addr);
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_ddma_transfer(dwc_otg_core_if_t * core_if,
++					dwc_ep_t * dwc_ep)
++{
++
++	dsts_data_t dsts = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++	int i, j;
++	uint32_t len;
++
++	if (dwc_ep->is_in)
++		dwc_ep->desc_cnt = dwc_ep->buf_proc_intrvl / dwc_ep->bInterval;
++	else
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++
++	/** Allocate descriptors for double buffering */
++	dwc_ep->iso_desc_addr =
++	    dwc_otg_ep_alloc_desc_chain(&dwc_ep->iso_dma_desc_addr,
++					dwc_ep->desc_cnt * 2);
++	if (dwc_ep->desc_addr) {
++		DWC_WARN("%s, can't allocate DMA descriptor chain\n", __func__);
++		return;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		uint32_t data_per_desc;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++		    core_if->dev_if->out_ep_regs[dwc_ep->num];
++		int offset;
++
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++		dma_ad = (dma_addr_t) DWC_READ_REG32(&(out_regs->doepdma));
++
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			uint32_t len = (j + 1) * dwc_ep->maxpacket;
++			if (len > dwc_ep->data_per_frame)
++				data_per_desc =
++				    dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket;
++			else
++				data_per_desc = dwc_ep->maxpacket;
++			len = data_per_desc % 4;
++			if (len)
++				data_per_desc += 4 - len;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		len = (j + 1) * dwc_ep->maxpacket;
++		if (len > dwc_ep->data_per_frame)
++			data_per_desc =
++			    dwc_ep->data_per_frame - j * dwc_ep->maxpacket;
++		else
++			data_per_desc = dwc_ep->maxpacket;
++		len = data_per_desc % 4;
++		if (len)
++			data_per_desc += 4 - len;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		dma_desc++;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_out.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		offset = 0;
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				uint32_t len = (j + 1) * dwc_ep->maxpacket;
++				if (len > dwc_ep->data_per_frame)
++					data_per_desc =
++					    dwc_ep->data_per_frame -
++					    j * dwc_ep->maxpacket;
++				else
++					data_per_desc = dwc_ep->maxpacket;
++				len = data_per_desc % 4;
++				if (len)
++					data_per_desc += 4 - len;
++
++				data_per_desc =
++				    sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				offset += data_per_desc;
++				dma_desc++;
++				dma_ad += data_per_desc;
++			}
++		}
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			offset += data_per_desc;
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = 1;
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = 0;
++
++		/** Write dma_ad into DOEPDMA register */
++		DWC_WRITE_REG32(&(out_regs->doepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++
++	}
++	/** ISO IN EP */
++	else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		dwc_otg_dev_dma_desc_t *dma_desc = dwc_ep->iso_desc_addr;
++		dma_addr_t dma_ad;
++		dwc_otg_dev_in_ep_regs_t *in_regs =
++		    core_if->dev_if->in_ep_regs[dwc_ep->num];
++		unsigned int frmnumber;
++		fifosize_data_t txfifosize, rxfifosize;
++
++		txfifosize.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[dwc_ep->num]->
++				   dtxfsts);
++		rxfifosize.d32 =
++		    DWC_READ_REG32(&core_if->core_global_regs->grxfsiz);
++
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++
++		dma_ad = dwc_ep->dma_addr0;
++
++		dsts.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp =
++		    (dwc_ep->data_per_frame % dwc_ep->maxpacket) ? 1 : 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++
++		frmnumber = dwc_ep->next_frame;
++
++		sts.b_iso_in.framenum = frmnumber;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		/** Buffer 0 descriptors setup */
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++		++dma_desc;
++
++		/** Buffer 1 descriptors setup */
++		sts.b_iso_in.ioc = 0;
++		dma_ad = dwc_ep->dma_addr1;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++			dma_desc++;
++
++			dma_ad += dwc_ep->data_per_frame;
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++
++			sts.b_iso_in.ioc = 0;
++		}
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = 1;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame = sts.b_iso_in.framenum + dwc_ep->bInterval;
++
++		/** Write dma_ad into diepdma register */
++		DWC_WRITE_REG32(&(in_regs->diepdma),
++				(uint32_t) dwc_ep->iso_dma_desc_addr);
++	}
++	/** Enable endpoint, clear nak  */
++	depctl.d32 = 0;
++	depctl.b.epena = 1;
++	depctl.b.usbactep = 1;
++	depctl.b.cnak = 1;
++
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	depctl.d32 = DWC_READ_REG32(addr);
++}
++
++/**
++ * This function initializes a descriptor chain for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void dwc_otg_iso_ep_start_buf_transfer(dwc_otg_core_if_t * core_if,
++				       dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	if (core_if->dma_enable == 0 || core_if->dma_desc_enable != 0) {
++		return;
++	} else {
++		deptsiz_data_t deptsiz = {.d32 = 0 };
++
++		ep->xfer_len =
++		    ep->data_per_frame * ep->buf_proc_intrvl / ep->bInterval;
++		ep->pkt_cnt =
++		    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++		ep->xfer_count = 0;
++		ep->xfer_buff =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++
++		if (ep->is_in) {
++			/* Program the transfer size and packet count
++			 *      as follows: xfersize = N * maxpacket +
++			 *      short_packet pktcnt = N + (short_packet
++			 *      exist ? 1 : 0)
++			 */
++			deptsiz.b.mc = ep->pkt_per_frm;
++			deptsiz.b.xfersize = ep->xfer_len;
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len - 1 + ep->maxpacket) / ep->maxpacket;
++			DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++					dieptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->in_ep_regs[ep->num]->
++					 diepdma), (uint32_t) ep->dma_addr);
++
++		} else {
++			deptsiz.b.pktcnt =
++			    (ep->xfer_len + (ep->maxpacket - 1)) /
++			    ep->maxpacket;
++			deptsiz.b.xfersize = deptsiz.b.pktcnt * ep->maxpacket;
++
++			DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++					doeptsiz, deptsiz.d32);
++
++			/* Write the DMA register */
++			DWC_WRITE_REG32(&
++					(core_if->dev_if->out_ep_regs[ep->num]->
++					 doepdma), (uint32_t) ep->dma_addr);
++
++		}
++		/** Enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++	}
++}
++
++/**
++ * This function does the setup for a data transfer for an EP and
++ * starts the transfer. For an IN transfer, the packets will be
++ * loaded into the appropriate Tx FIFO in the ISR. For OUT transfers,
++ * the packets are unloaded from the Rx FIFO in the ISR.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++static void dwc_otg_iso_ep_start_transfer(dwc_otg_core_if_t * core_if,
++					  dwc_ep_t * ep)
++{
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			if (ep->is_in) {
++				ep->desc_cnt = ep->pkt_cnt / ep->pkt_per_frm;
++			} else {
++				ep->desc_cnt = ep->pkt_cnt;
++			}
++			dwc_otg_iso_ep_start_ddma_transfer(core_if, ep);
++		} else {
++			if (core_if->pti_enh_enable) {
++				dwc_otg_iso_ep_start_buf_transfer(core_if, ep);
++			} else {
++				ep->cur_pkt_addr =
++				    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->
++				    xfer_buff0;
++				ep->cur_pkt_dma_addr =
++				    (ep->proc_buf_num) ? ep->dma_addr1 : ep->
++				    dma_addr0;
++				dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++			}
++		}
++	} else {
++		ep->cur_pkt_addr =
++		    (ep->proc_buf_num) ? ep->xfer_buff1 : ep->xfer_buff0;
++		ep->cur_pkt_dma_addr =
++		    (ep->proc_buf_num) ? ep->dma_addr1 : ep->dma_addr0;
++		dwc_otg_iso_ep_start_frm_transfer(core_if, ep);
++	}
++}
++
++/**
++ * This function stops transfer for an EP and
++ * resets the ep's variables.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ */
++
++void dwc_otg_iso_ep_stop_transfer(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	depctl_data_t depctl = {.d32 = 0 };
++	volatile uint32_t *addr;
++
++	if (ep->is_in == 1) {
++		addr = &core_if->dev_if->in_ep_regs[ep->num]->diepctl;
++	} else {
++		addr = &core_if->dev_if->out_ep_regs[ep->num]->doepctl;
++	}
++
++	/* disable the ep */
++	depctl.d32 = DWC_READ_REG32(addr);
++
++	depctl.b.epdis = 1;
++	depctl.b.snak = 1;
++
++	DWC_WRITE_REG32(addr, depctl.d32);
++
++	if (core_if->dma_desc_enable &&
++	    ep->iso_desc_addr && ep->iso_dma_desc_addr) {
++		dwc_otg_ep_free_desc_chain(ep->iso_desc_addr,
++					   ep->iso_dma_desc_addr,
++					   ep->desc_cnt * 2);
++	}
++
++	/* reset varibales */
++	ep->dma_addr0 = 0;
++	ep->dma_addr1 = 0;
++	ep->xfer_buff0 = 0;
++	ep->xfer_buff1 = 0;
++	ep->data_per_frame = 0;
++	ep->data_pattern_frame = 0;
++	ep->sync_frame = 0;
++	ep->buf_proc_intrvl = 0;
++	ep->bInterval = 0;
++	ep->proc_buf_num = 0;
++	ep->pkt_per_frm = 0;
++	ep->pkt_per_frm = 0;
++	ep->desc_cnt = 0;
++	ep->iso_desc_addr = 0;
++	ep->iso_dma_desc_addr = 0;
++}
++
++int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++			     uint8_t * buf0, uint8_t * buf1, dwc_dma_t dma0,
++			     dwc_dma_t dma1, int sync_frame, int dp_frame,
++			     int data_per_frame, int start_frame,
++			     int buf_proc_intrvl, void *req_handle,
++			     int atomic_alloc)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags = 0;
++	dwc_ep_t *dwc_ep;
++	int32_t frm_data;
++	dsts_data_t dsts;
++	dwc_otg_core_if_t *core_if;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	core_if = GET_CORE_IF(pcd);
++	dwc_ep = &ep->dwc_ep;
++
++	if (ep->iso_req_handle) {
++		DWC_WARN("ISO request in progress\n");
++	}
++
++	dwc_ep->dma_addr0 = dma0;
++	dwc_ep->dma_addr1 = dma1;
++
++	dwc_ep->xfer_buff0 = buf0;
++	dwc_ep->xfer_buff1 = buf1;
++
++	dwc_ep->data_per_frame = data_per_frame;
++
++	/** @todo - pattern data support is to be implemented in the future */
++	dwc_ep->data_pattern_frame = dp_frame;
++	dwc_ep->sync_frame = sync_frame;
++
++	dwc_ep->buf_proc_intrvl = buf_proc_intrvl;
++
++	dwc_ep->bInterval = 1 << (ep->desc->bInterval - 1);
++
++	dwc_ep->proc_buf_num = 0;
++
++	dwc_ep->pkt_per_frm = 0;
++	frm_data = ep->dwc_ep.data_per_frame;
++	while (frm_data > 0) {
++		dwc_ep->pkt_per_frm++;
++		frm_data -= ep->dwc_ep.maxpacket;
++	}
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	if (start_frame == -1) {
++		dwc_ep->next_frame = dsts.b.soffn + 1;
++		if (dwc_ep->bInterval != 1) {
++			dwc_ep->next_frame =
++			    dwc_ep->next_frame + (dwc_ep->bInterval - 1 -
++						  dwc_ep->next_frame %
++						  dwc_ep->bInterval);
++		}
++	} else {
++		dwc_ep->next_frame = start_frame;
++	}
++
++	if (!core_if->pti_enh_enable) {
++		dwc_ep->pkt_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	} else {
++		dwc_ep->pkt_cnt =
++		    (dwc_ep->data_per_frame *
++		     (dwc_ep->buf_proc_intrvl / dwc_ep->bInterval)
++		     - 1 + dwc_ep->maxpacket) / dwc_ep->maxpacket;
++	}
++
++	if (core_if->dma_desc_enable) {
++		dwc_ep->desc_cnt =
++		    dwc_ep->buf_proc_intrvl * dwc_ep->pkt_per_frm /
++		    dwc_ep->bInterval;
++	}
++
++	if (atomic_alloc) {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC_ATOMIC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	} else {
++		dwc_ep->pkt_info =
++		    DWC_ALLOC(sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++	if (!dwc_ep->pkt_info) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_NO_MEMORY;
++	}
++	if (core_if->pti_enh_enable) {
++		dwc_memset(dwc_ep->pkt_info, 0,
++			   sizeof(iso_pkt_info_t) * dwc_ep->pkt_cnt);
++	}
++
++	dwc_ep->cur_pkt = 0;
++	ep->iso_req_handle = req_handle;
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	dwc_otg_iso_ep_start_transfer(core_if, dwc_ep);
++	return 0;
++}
++
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle)
++{
++	dwc_irqflags_t flags = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || !ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	dwc_otg_iso_ep_stop_transfer(GET_CORE_IF(pcd), dwc_ep);
++
++	DWC_FREE(dwc_ep->pkt_info);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (ep->iso_req_handle != req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	ep->iso_req_handle = 0;
++	return 0;
++}
++
++/**
++ * This function is used for perodical data exchnage between PCD and gadget drivers.
++ * for Isochronous EPs
++ *
++ *	- Every time a sync period completes this function is called to
++ *	  perform data exchange between PCD and gadget
++ */
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle)
++{
++	int i;
++	dwc_ep_t *dwc_ep;
++
++	dwc_ep = &ep->dwc_ep;
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++	pcd->fops->isoc_complete(pcd, ep->priv, ep->iso_req_handle,
++				 dwc_ep->proc_buf_num ^ 0x1);
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	for (i = 0; i < dwc_ep->pkt_cnt; ++i) {
++		dwc_ep->pkt_info[i].status = 0;
++		dwc_ep->pkt_info[i].offset = 0;
++		dwc_ep->pkt_info[i].length = 0;
++	}
++}
++
++int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *iso_req_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep->desc || ep->dwc_ep.num == 0) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++	dwc_ep = &ep->dwc_ep;
++
++	return dwc_ep->pkt_cnt;
++}
++
++void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd, void *ep_handle,
++				       void *iso_req_handle, int packet,
++				       int *status, int *actual, int *offset)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep)
++		DWC_WARN("bad ep\n");
++
++	dwc_ep = &ep->dwc_ep;
++
++	*status = dwc_ep->pkt_info[packet].status;
++	*actual = dwc_ep->pkt_info[packet].length;
++	*offset = dwc_ep->pkt_info[packet].offset;
++}
++
++#endif /* DWC_EN_ISOC */
++
++static void dwc_otg_pcd_init_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * pcd_ep,
++				uint32_t is_in, uint32_t ep_num)
++{
++	/* Init EP structure */
++	pcd_ep->desc = 0;
++	pcd_ep->pcd = pcd;
++	pcd_ep->stopped = 1;
++	pcd_ep->queue_sof = 0;
++
++	/* Init DWC ep structure */
++	pcd_ep->dwc_ep.is_in = is_in;
++	pcd_ep->dwc_ep.num = ep_num;
++	pcd_ep->dwc_ep.active = 0;
++	pcd_ep->dwc_ep.tx_fifo_num = 0;
++	/* Control until ep is actvated */
++	pcd_ep->dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++	pcd_ep->dwc_ep.maxpacket = MAX_PACKET_SIZE;
++	pcd_ep->dwc_ep.dma_addr = 0;
++	pcd_ep->dwc_ep.start_xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_buff = 0;
++	pcd_ep->dwc_ep.xfer_len = 0;
++	pcd_ep->dwc_ep.xfer_count = 0;
++	pcd_ep->dwc_ep.sent_zlp = 0;
++	pcd_ep->dwc_ep.total_len = 0;
++	pcd_ep->dwc_ep.desc_addr = 0;
++	pcd_ep->dwc_ep.dma_desc_addr = 0;
++	DWC_CIRCLEQ_INIT(&pcd_ep->queue);
++}
++
++/**
++ * Initialize ep's
++ */
++static void dwc_otg_pcd_reinit(dwc_otg_pcd_t * pcd)
++{
++	int i;
++	uint32_t hwcfg1;
++	dwc_otg_pcd_ep_t *ep;
++	int in_ep_cntr, out_ep_cntr;
++	uint32_t num_in_eps = (GET_CORE_IF(pcd))->dev_if->num_in_eps;
++	uint32_t num_out_eps = (GET_CORE_IF(pcd))->dev_if->num_out_eps;
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &pcd->ep0;
++	dwc_otg_pcd_init_ep(pcd, ep, 0, 0);
++
++	in_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 3;
++	for (i = 1; in_ep_cntr < num_in_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->in_ep[in_ep_cntr];
++			in_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 1 /* IN */ , i);
++
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	out_ep_cntr = 0;
++	hwcfg1 = (GET_CORE_IF(pcd))->hwcfg1.d32 >> 2;
++	for (i = 1; out_ep_cntr < num_out_eps; i++) {
++		if ((hwcfg1 & 0x1) == 0) {
++			dwc_otg_pcd_ep_t *ep = &pcd->out_ep[out_ep_cntr];
++			out_ep_cntr++;
++			/**
++			 * @todo NGS: Add direction to EP, based on contents
++			 * of HWCFG1.  Need a copy of HWCFG1 in pcd structure?
++			 * sprintf(";r
++			 */
++			dwc_otg_pcd_init_ep(pcd, ep, 0 /* OUT */ , i);
++			DWC_CIRCLEQ_INIT(&ep->queue);
++		}
++		hwcfg1 >>= 2;
++	}
++
++	pcd->ep0state = EP0_DISCONNECT;
++	pcd->ep0.dwc_ep.maxpacket = MAX_EP0_SIZE;
++	pcd->ep0.dwc_ep.type = DWC_OTG_EP_TYPE_CONTROL;
++}
++
++/**
++ * This function is called when the SRP timer expires. The SRP should
++ * complete within 6 seconds.
++ */
++static void srp_timeout(void *ptr)
++{
++	gotgctl_data_t gotgctl;
++	dwc_otg_core_if_t *core_if = (dwc_otg_core_if_t *) ptr;
++	volatile uint32_t *addr = &core_if->core_global_regs->gotgctl;
++
++	gotgctl.d32 = DWC_READ_REG32(addr);
++
++	core_if->srp_timer_started = 0;
++
++	if (core_if->adp_enable) {
++		if (gotgctl.b.bsesvld == 0) {
++			gpwrdn_data_t gpwrdn = {.d32 = 0 };
++			DWC_PRINTF("SRP Timeout BSESSVLD = 0\n");
++			/* Power off the core */
++			if (core_if->power_down == 2) {
++				gpwrdn.b.pwrdnswtch = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++			}
++
++			gpwrdn.d32 = 0;
++			gpwrdn.b.pmuintsel = 1;
++			gpwrdn.b.pmuactv = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gpwrdn, 0,
++					 gpwrdn.d32);
++			dwc_otg_adp_probe_start(core_if);
++		} else {
++			DWC_PRINTF("SRP Timeout BSESSVLD = 1\n");
++			core_if->op_state = B_PERIPHERAL;
++			dwc_otg_core_init(core_if);
++			dwc_otg_enable_global_interrupts(core_if);
++			cil_pcd_start(core_if);
++		}
++	}
++
++	if ((core_if->core_params->phy_type == DWC_PHY_TYPE_PARAM_FS) &&
++	    (core_if->core_params->i2c_enable)) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		if ((core_if->srp_success) && (gotgctl.b.bsesvld)) {
++			if (core_if->pcd_cb && core_if->pcd_cb->resume_wakeup) {
++				core_if->pcd_cb->resume_wakeup(core_if->pcd_cb->p);
++			}
++
++			/* Clear Session Request */
++			gotgctl.d32 = 0;
++			gotgctl.b.sesreq = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gotgctl,
++					 gotgctl.d32, 0);
++
++			core_if->srp_success = 0;
++		} else {
++			__DWC_ERROR("Device not connected/responding\n");
++			gotgctl.b.sesreq = 0;
++			DWC_WRITE_REG32(addr, gotgctl.d32);
++		}
++	} else if (gotgctl.b.sesreq) {
++		DWC_PRINTF("SRP Timeout\n");
++
++		__DWC_ERROR("Device not connected/responding\n");
++		gotgctl.b.sesreq = 0;
++		DWC_WRITE_REG32(addr, gotgctl.d32);
++	} else {
++		DWC_PRINTF(" SRP GOTGCTL=%0x\n", gotgctl.d32);
++	}
++}
++
++/**
++ * Tasklet
++ *
++ */
++extern void start_next_request(dwc_otg_pcd_ep_t * ep);
++
++static void start_xfer_tasklet_func(void *data)
++{
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	int i;
++	depctl_data_t diepctl;
++
++	DWC_DEBUGPL(DBG_PCDV, "Start xfer tasklet\n");
++
++	diepctl.d32 = DWC_READ_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl);
++
++	if (pcd->ep0.queue_sof) {
++		pcd->ep0.queue_sof = 0;
++		start_next_request(&pcd->ep0);
++		// break;
++	}
++
++	for (i = 0; i < core_if->dev_if->num_in_eps; i++) {
++		depctl_data_t diepctl;
++		diepctl.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[i]->diepctl);
++
++		if (pcd->in_ep[i].queue_sof) {
++			pcd->in_ep[i].queue_sof = 0;
++			start_next_request(&pcd->in_ep[i]);
++			// break;
++		}
++	}
++
++	return;
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_pcd_t *pcd = NULL;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++
++	/*
++	 * Allocate PCD structure
++	 */
++	pcd = DWC_ALLOC(sizeof(dwc_otg_pcd_t));
++
++	if (pcd == NULL) {
++		return NULL;
++	}
++
++	pcd->lock = DWC_SPINLOCK_ALLOC();
++        DWC_DEBUGPL(DBG_HCDV, "Init of PCD %p given core_if %p\n",
++                    pcd, core_if);//GRAYG
++	if (!pcd->lock) {
++		DWC_ERROR("Could not allocate lock for pcd");
++		DWC_FREE(pcd);
++		return NULL;
++	}
++	/* Set core_if's lock pointer to hcd->lock */
++	core_if->lock = pcd->lock;
++	pcd->core_if = core_if;
++
++	dev_if = core_if->dev_if;
++	dev_if->isoc_ep = NULL;
++
++	if (core_if->hwcfg4.b.ded_fifo_en) {
++		DWC_PRINTF("Dedicated Tx FIFOs mode\n");
++	} else {
++		DWC_PRINTF("Shared Tx FIFO mode\n");
++	}
++
++	/*
++	 * Initialized the Core for Device mode here if there is nod ADP support.
++	 * Otherwise it will be done later in dwc_otg_adp_start routine.
++	 */
++	if (dwc_otg_is_device_mode(core_if) /*&& !core_if->adp_enable*/) {
++		dwc_otg_core_dev_init(core_if);
++	}
++
++	/*
++	 * Register the PCD Callbacks.
++	 */
++	dwc_otg_cil_register_pcd_callbacks(core_if, &pcd_callbacks, pcd);
++
++	/*
++	 * Initialize the DMA buffer for SETUP packets
++	 */
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		pcd->setup_pkt =
++		    DWC_DMA_ALLOC(sizeof(*pcd->setup_pkt) * 5,
++				  &pcd->setup_pkt_dma_handle);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf =
++		    DWC_DMA_ALLOC(sizeof(uint16_t),
++				  &pcd->status_buf_dma_handle);
++		if (pcd->status_buf == NULL) {
++			DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++				     pcd->setup_pkt, pcd->setup_pkt_dma_handle);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dev_if->setup_desc_addr[0] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[0], 1);
++			dev_if->setup_desc_addr[1] =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_setup_desc_addr[1], 1);
++			dev_if->in_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_in_desc_addr, 1);
++			dev_if->out_desc_addr =
++			    dwc_otg_ep_alloc_desc_chain
++			    (&dev_if->dma_out_desc_addr, 1);
++			pcd->data_terminated = 0;
++
++			if (dev_if->setup_desc_addr[0] == 0
++			    || dev_if->setup_desc_addr[1] == 0
++			    || dev_if->in_desc_addr == 0
++			    || dev_if->out_desc_addr == 0) {
++
++				if (dev_if->out_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->out_desc_addr,
++					     dev_if->dma_out_desc_addr, 1);
++				if (dev_if->in_desc_addr)
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->in_desc_addr,
++					     dev_if->dma_in_desc_addr, 1);
++				if (dev_if->setup_desc_addr[1])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[1],
++					     dev_if->dma_setup_desc_addr[1], 1);
++				if (dev_if->setup_desc_addr[0])
++					dwc_otg_ep_free_desc_chain
++					    (dev_if->setup_desc_addr[0],
++					     dev_if->dma_setup_desc_addr[0], 1);
++
++				DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5,
++					     pcd->setup_pkt,
++					     pcd->setup_pkt_dma_handle);
++				DWC_DMA_FREE(sizeof(*pcd->status_buf),
++					     pcd->status_buf,
++					     pcd->status_buf_dma_handle);
++
++				DWC_FREE(pcd);
++
++				return NULL;
++			}
++		}
++	} else {
++		pcd->setup_pkt = DWC_ALLOC(sizeof(*pcd->setup_pkt) * 5);
++		if (pcd->setup_pkt == NULL) {
++			DWC_FREE(pcd);
++			return NULL;
++		}
++
++		pcd->status_buf = DWC_ALLOC(sizeof(uint16_t));
++		if (pcd->status_buf == NULL) {
++			DWC_FREE(pcd->setup_pkt);
++			DWC_FREE(pcd);
++			return NULL;
++		}
++	}
++
++	dwc_otg_pcd_reinit(pcd);
++
++	/* Allocate the cfi object for the PCD */
++#ifdef DWC_UTE_CFI
++	pcd->cfi = DWC_ALLOC(sizeof(cfiobject_t));
++	if (NULL == pcd->cfi)
++		goto fail;
++	if (init_cfi(pcd->cfi)) {
++		CFI_INFO("%s: Failed to init the CFI object\n", __func__);
++		goto fail;
++	}
++#endif
++
++	/* Initialize tasklets */
++	pcd->start_xfer_tasklet = DWC_TASK_ALLOC("xfer_tasklet",
++						 start_xfer_tasklet_func, pcd);
++	pcd->test_mode_tasklet = DWC_TASK_ALLOC("test_mode_tasklet",
++						do_test_mode, pcd);
++
++	/* Initialize SRP timer */
++	core_if->srp_timer = DWC_TIMER_ALLOC("SRP TIMER", srp_timeout, core_if);
++
++	if (core_if->core_params->dev_out_nak) {
++		/**
++		* Initialize xfer timeout timer. Implemented for
++		* 2.93a feature "Device DDMA OUT NAK Enhancement"
++		*/
++		for(i = 0; i < MAX_EPS_CHANNELS; i++) {
++			pcd->core_if->ep_xfer_timer[i] =
++				DWC_TIMER_ALLOC("ep timer", ep_xfer_timeout,
++				&pcd->core_if->ep_xfer_info[i]);
++		}
++	}
++
++	return pcd;
++#ifdef DWC_UTE_CFI
++fail:
++#endif
++	if (pcd->setup_pkt)
++		DWC_FREE(pcd->setup_pkt);
++	if (pcd->status_buf)
++		DWC_FREE(pcd->status_buf);
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi)
++		DWC_FREE(pcd->cfi);
++#endif
++	if (pcd)
++		DWC_FREE(pcd);
++	return NULL;
++
++}
++
++/**
++ * Remove PCD specific data
++ */
++void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	int i;
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[i]);
++			pcd->core_if->ep_xfer_info[i].state = 0;
++		}
++	}
++
++	if (GET_CORE_IF(pcd)->dma_enable) {
++		DWC_DMA_FREE(sizeof(*pcd->setup_pkt) * 5, pcd->setup_pkt,
++			     pcd->setup_pkt_dma_handle);
++		DWC_DMA_FREE(sizeof(uint16_t), pcd->status_buf,
++			     pcd->status_buf_dma_handle);
++		if (GET_CORE_IF(pcd)->dma_desc_enable) {
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[0],
++						   dev_if->dma_setup_desc_addr
++						   [0], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->setup_desc_addr[1],
++						   dev_if->dma_setup_desc_addr
++						   [1], 1);
++			dwc_otg_ep_free_desc_chain(dev_if->in_desc_addr,
++						   dev_if->dma_in_desc_addr, 1);
++			dwc_otg_ep_free_desc_chain(dev_if->out_desc_addr,
++						   dev_if->dma_out_desc_addr,
++						   1);
++		}
++	} else {
++		DWC_FREE(pcd->setup_pkt);
++		DWC_FREE(pcd->status_buf);
++	}
++	DWC_SPINLOCK_FREE(pcd->lock);
++	/* Set core_if's lock pointer to NULL */
++	pcd->core_if->lock = NULL;
++
++	DWC_TASK_FREE(pcd->start_xfer_tasklet);
++	DWC_TASK_FREE(pcd->test_mode_tasklet);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		for (i = 0; i < MAX_EPS_CHANNELS; i++) {
++			if (pcd->core_if->ep_xfer_timer[i]) {
++					DWC_TIMER_FREE(pcd->core_if->ep_xfer_timer[i]);
++			}
++		}
++	}
++
++/* Release the CFI object's dynamic memory */
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.release) {
++		pcd->cfi->ops.release(pcd->cfi);
++	}
++#endif
++
++	DWC_FREE(pcd);
++}
++
++/**
++ * Returns whether registered pcd is dual speed or not
++ */
++uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	if ((core_if->core_params->speed == DWC_SPEED_PARAM_FULL) ||
++	    ((core_if->hwcfg2.b.hs_phy_type == 2) &&
++	     (core_if->hwcfg2.b.fs_phy_type == 1) &&
++	     (core_if->core_params->ulpi_fs_ls))) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * Returns whether registered pcd is OTG capable or not
++ */
++uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	gusbcfg_data_t usbcfg = {.d32 = 0 };
++
++	usbcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->gusbcfg);
++	if (!usbcfg.b.srpcap || !usbcfg.b.hnpcap) {
++		return 0;
++	}
++
++	return 1;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t TxMsk = 1;
++	int i;
++
++	for (i = 0; i < core_if->hwcfg4.b.num_in_eps; ++i) {
++		if ((TxMsk & core_if->tx_msk) == 0) {
++			core_if->tx_msk |= TxMsk;
++			return i + 1;
++		}
++		TxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function assigns periodic Tx FIFO to an periodic EP
++ * in shared Tx FIFO mode
++ */
++static uint32_t assign_perio_tx_fifo(dwc_otg_core_if_t * core_if)
++{
++	uint32_t PerTxMsk = 1;
++	int i;
++	for (i = 0; i < core_if->hwcfg4.b.num_dev_perio_in_ep; ++i) {
++		if ((PerTxMsk & core_if->p_tx_msk) == 0) {
++			core_if->p_tx_msk |= PerTxMsk;
++			return i + 1;
++		}
++		PerTxMsk <<= 1;
++	}
++	return 0;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_perio_tx_fifo(dwc_otg_core_if_t * core_if,
++				  uint32_t fifo_num)
++{
++	core_if->p_tx_msk =
++	    (core_if->p_tx_msk & (1 << (fifo_num - 1))) ^ core_if->p_tx_msk;
++}
++
++/**
++ * This function releases periodic Tx FIFO
++ * in shared Tx FIFO mode
++ */
++static void release_tx_fifo(dwc_otg_core_if_t * core_if, uint32_t fifo_num)
++{
++	core_if->tx_msk =
++	    (core_if->tx_msk & (1 << (fifo_num - 1))) ^ core_if->tx_msk;
++}
++
++/**
++ * This function is being called from gadget
++ * to enable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++			  const uint8_t * ep_desc, void *usb_ep)
++{
++	int num, dir;
++	dwc_otg_pcd_ep_t *ep = NULL;
++	const usb_endpoint_descriptor_t *desc;
++	dwc_irqflags_t flags;
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	int retval = 0;
++	int i, epcount;
++
++	desc = (const usb_endpoint_descriptor_t *)ep_desc;
++
++	if (!desc) {
++		pcd->ep0.priv = usb_ep;
++		ep = &pcd->ep0;
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	num = UE_GET_ADDR(desc->bEndpointAddress);
++	dir = UE_GET_DIR(desc->bEndpointAddress);
++
++	if (!desc->wMaxPacketSize) {
++		DWC_WARN("bad maxpacketsize\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	if (dir == UE_DIR_IN) {
++		epcount = pcd->core_if->dev_if->num_in_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->in_ep[i].dwc_ep.num) {
++				ep = &pcd->in_ep[i];
++				break;
++			}
++		}
++	} else {
++		epcount = pcd->core_if->dev_if->num_out_eps;
++		for (i = 0; i < epcount; i++) {
++			if (num == pcd->out_ep[i].dwc_ep.num) {
++				ep = &pcd->out_ep[i];
++				break;
++			}
++		}
++	}
++
++	if (!ep) {
++		DWC_WARN("bad address\n");
++		retval = -DWC_E_INVALID;
++		goto out;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	ep->desc = desc;
++	ep->priv = usb_ep;
++
++	/*
++	 * Activate the EP
++	 */
++	ep->stopped = 0;
++
++	ep->dwc_ep.is_in = (dir == UE_DIR_IN);
++	ep->dwc_ep.maxpacket = UGETW(desc->wMaxPacketSize);
++
++	ep->dwc_ep.type = desc->bmAttributes & UE_XFERTYPE;
++
++	if (ep->dwc_ep.is_in) {
++		if (!GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			ep->dwc_ep.tx_fifo_num = 0;
++
++			if (ep->dwc_ep.type == UE_ISOCHRONOUS) {
++				/*
++				 * if ISOC EP then assign a Periodic Tx FIFO.
++				 */
++				ep->dwc_ep.tx_fifo_num =
++				    assign_perio_tx_fifo(GET_CORE_IF(pcd));
++			}
++		} else {
++			/*
++			 * if Dedicated FIFOs mode is on then assign a Tx FIFO.
++			 */
++			ep->dwc_ep.tx_fifo_num =
++			    assign_tx_fifo(GET_CORE_IF(pcd));
++		}
++
++		/* Calculating EP info controller base address */
++		if (ep->dwc_ep.tx_fifo_num
++		    && GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			gdfifocfg.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->gdfifocfg);
++			gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->core_global_regs->
++			      dtxfsiz[ep->dwc_ep.tx_fifo_num - 1]) >> 16);
++			gdfifocfg.b.epinfobase =
++			    gdfifocfgbase.d32 + dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++						core_global_regs->gdfifocfg,
++						gdfifocfg.d32);
++			}
++		}
++	}
++	/* Set initial data PID. */
++	if (ep->dwc_ep.type == UE_BULK) {
++		ep->dwc_ep.data_pid_start = 0;
++	}
++
++	/* Alloc DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++#ifndef DWC_UTE_PER_IO
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++#endif
++			ep->dwc_ep.desc_addr =
++			    dwc_otg_ep_alloc_desc_chain(&ep->
++							dwc_ep.dma_desc_addr,
++							MAX_DMA_DESC_CNT);
++			if (!ep->dwc_ep.desc_addr) {
++				DWC_WARN("%s, can't allocate DMA descriptor\n",
++					 __func__);
++				retval = -DWC_E_SHUTDOWN;
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				goto out;
++			}
++#ifndef DWC_UTE_PER_IO
++		}
++#endif
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Activate %s: type=%d, mps=%d desc=%p\n",
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"),
++		    ep->dwc_ep.type, ep->dwc_ep.maxpacket, ep->desc);
++#ifdef DWC_UTE_PER_IO
++	ep->dwc_ep.xiso_bInterval = 1 << (ep->desc->bInterval - 1);
++#endif
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		ep->dwc_ep.bInterval = 1 << (ep->desc->bInterval - 1);
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}
++
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++#ifdef DWC_UTE_CFI
++	if (pcd->cfi->ops.ep_enable) {
++		pcd->cfi->ops.ep_enable(pcd->cfi, pcd, ep);
++	}
++#endif
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out:
++	return retval;
++}
++
++/**
++ * This function is being called from gadget
++ * to disable PCD endpoint.
++ */
++int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	dwc_otg_dev_dma_desc_t *desc_addr;
++	dwc_dma_t dma_desc_addr;
++	gdfifocfg_data_t gdfifocfgbase = {.d32 = 0 };
++	gdfifocfg_data_t gdfifocfg = {.d32 = 0 };
++	fifosize_data_t dptxfsiz = {.d32 = 0 };
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || !ep->desc) {
++		DWC_DEBUGPL(DBG_PCD, "bad ep address\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	dwc_otg_request_nuke(ep);
++
++	dwc_otg_ep_deactivate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (pcd->core_if->core_params->dev_out_nak) {
++		DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[ep->dwc_ep.num]);
++		pcd->core_if->ep_xfer_info[ep->dwc_ep.num].state = 0;
++	}
++	ep->desc = NULL;
++	ep->stopped = 1;
++
++	gdfifocfg.d32 =
++	    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg);
++	gdfifocfgbase.d32 = gdfifocfg.d32 >> 16;
++
++	if (ep->dwc_ep.is_in) {
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Flush the Tx FIFO */
++			dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd),
++					      ep->dwc_ep.tx_fifo_num);
++		}
++		release_perio_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		release_tx_fifo(GET_CORE_IF(pcd), ep->dwc_ep.tx_fifo_num);
++		if (GET_CORE_IF(pcd)->en_multiple_tx_fifo) {
++			/* Decreasing EPinfo Base Addr */
++			dptxfsiz.d32 =
++			    (DWC_READ_REG32
++			     (&GET_CORE_IF(pcd)->
++				core_global_regs->dtxfsiz[ep->dwc_ep.tx_fifo_num-1]) >> 16);
++			gdfifocfg.b.epinfobase = gdfifocfgbase.d32 - dptxfsiz.d32;
++			if (GET_CORE_IF(pcd)->snpsid <= OTG_CORE_REV_2_94a) {
++				DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gdfifocfg,
++					gdfifocfg.d32);
++			}
++		}
++	}
++
++	/* Free DMA Descriptors */
++	if (GET_CORE_IF(pcd)->dma_desc_enable) {
++		if (ep->dwc_ep.type != UE_ISOCHRONOUS) {
++			desc_addr = ep->dwc_ep.desc_addr;
++			dma_desc_addr = ep->dwc_ep.dma_desc_addr;
++
++			/* Cannot call dma_free_coherent() with IRQs disabled */
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			dwc_otg_ep_free_desc_chain(desc_addr, dma_desc_addr,
++						   MAX_DMA_DESC_CNT);
++
++			goto out_unlocked;
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++out_unlocked:
++	DWC_DEBUGPL(DBG_PCD, "%d %s disabled\n", ep->dwc_ep.num,
++		    ep->dwc_ep.is_in ? "IN" : "OUT");
++	return 0;
++
++}
++
++/******************************************************************************/
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * Free the request and its extended parts
++ *
++ */
++void dwc_pcd_xiso_ereq_free(dwc_otg_pcd_ep_t * ep, dwc_otg_pcd_request_t * req)
++{
++	DWC_FREE(req->ext_req.per_io_frame_descs);
++	DWC_FREE(req);
++}
++
++/**
++ * Start the next request in the endpoint's queue.
++ *
++ */
++int dwc_otg_pcd_xiso_start_next_request(dwc_otg_pcd_t * pcd,
++					dwc_otg_pcd_ep_t * ep)
++{
++	int i;
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_ep_t *dwcep = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso;
++	uint16_t nat;
++	depctl_data_t diepctl;
++
++	dwcep = &ep->dwc_ep;
++
++	if (dwcep->xiso_active_xfers > 0) {
++#if 0	//Disable this to decrease s/w overhead that is crucial for Isoc transfers
++		DWC_WARN("There are currently active transfers for EP%d \
++				(active=%d; queued=%d)", dwcep->num, dwcep->xiso_active_xfers,
++				dwcep->xiso_queued_xfers);
++#endif
++		return 0;
++	}
++
++	nat = UGETW(ep->desc->wMaxPacketSize);
++	nat = (nat >> 11) & 0x03;
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		ereq = &req->ext_req;
++		ep->stopped = 0;
++
++		/* Get the frame number */
++		dwcep->xiso_frame_num =
++		    dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++		DWC_DEBUG("FRM_NUM=%d", dwcep->xiso_frame_num);
++
++		ddesc_iso = ereq->per_io_frame_descs;
++
++		if (dwcep->is_in) {
++			/* Setup DMA Descriptor chain for IN Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				if ( i > 0 )
++					dwcep->xiso_frame_num =
++					    (dwcep->xiso_bInterval +
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_in.txbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_in.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_in.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_in.txsts = 0;
++				dwcep->desc_addr[i].status.b_iso_in.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_in.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_in.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_in.l = 0;
++
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_in.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_in.l = 1;
++				}
++			}
++
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->dev_if->
++					in_ep_regs[dwcep->num]->diepdma,
++					dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->dev_if->
++					 in_ep_regs[dwcep->num]->diepctl, 0,
++					 diepctl.d32);
++		} else {
++			/* Setup DMA Descriptor chain for OUT Isoc request */
++			for (i = 0; i < ereq->pio_pkt_count; i++) {
++				//if ((i % (nat + 1)) == 0)
++				dwcep->xiso_frame_num = (dwcep->xiso_bInterval +
++										dwcep->xiso_frame_num) & 0x3FFF;
++				dwcep->desc_addr[i].buf =
++				    req->dma + ddesc_iso[i].offset;
++				dwcep->desc_addr[i].status.b_iso_out.rxbytes =
++				    ddesc_iso[i].length;
++				dwcep->desc_addr[i].status.b_iso_out.framenum =
++				    dwcep->xiso_frame_num;
++				dwcep->desc_addr[i].status.b_iso_out.bs =
++				    BS_HOST_READY;
++				dwcep->desc_addr[i].status.b_iso_out.rxsts = 0;
++				dwcep->desc_addr[i].status.b_iso_out.sp =
++				    (ddesc_iso[i].length %
++				     dwcep->maxpacket) ? 1 : 0;
++				dwcep->desc_addr[i].status.b_iso_out.ioc = 0;
++				dwcep->desc_addr[i].status.b_iso_out.pid = nat + 1;
++				dwcep->desc_addr[i].status.b_iso_out.l = 0;
++
++				/* Process the last descriptor */
++				if (i == ereq->pio_pkt_count - 1) {
++					dwcep->desc_addr[i].status.b_iso_out.ioc = 1;
++					dwcep->desc_addr[i].status.b_iso_out.l = 1;
++				}
++			}
++
++			/* Setup and start the transfer for this endpoint */
++			dwcep->xiso_active_xfers++;
++			DWC_WRITE_REG32(&GET_CORE_IF(pcd)->
++					dev_if->out_ep_regs[dwcep->num]->
++					doepdma, dwcep->dma_desc_addr);
++			diepctl.d32 = 0;
++			diepctl.b.epena = 1;
++			diepctl.b.cnak = 1;
++			DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++					 dev_if->out_ep_regs[dwcep->num]->
++					 doepctl, 0, diepctl.d32);
++		}
++
++	} else {
++		ep->stopped = 1;
++	}
++
++	return 0;
++}
++
++/**
++ *	- Remove the request from the queue
++ */
++void complete_xiso_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_pkt_desc_port *ddesc_iso = NULL;
++	dwc_ep_t *dwcep = NULL;
++	int i;
++
++	//DWC_DEBUG();
++	dwcep = &ep->dwc_ep;
++
++	/* Get the first pending request from the queue */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++		dwcep->xiso_active_xfers--;
++		dwcep->xiso_queued_xfers--;
++		/* Remove this request from the queue */
++		DWC_CIRCLEQ_REMOVE_INIT(&ep->queue, req, queue_entry);
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	ep->stopped = 1;
++	ereq = &req->ext_req;
++	ddesc_iso = ereq->per_io_frame_descs;
++
++	if (dwcep->xiso_active_xfers < 0) {
++		DWC_WARN("EP#%d (xiso_active_xfers=%d)", dwcep->num,
++			 dwcep->xiso_active_xfers);
++	}
++
++	/* Fill the Isoc descs of portable extended req from dma descriptors */
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		if (dwcep->is_in) {	/* IN endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_in.txbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_in.txsts;
++		} else {	/* OUT endpoints */
++			ddesc_iso[i].actual_length = ddesc_iso[i].length -
++			    dwcep->desc_addr[i].status.b_iso_out.rxbytes;
++			ddesc_iso[i].status =
++			    dwcep->desc_addr[i].status.b_iso_out.rxsts;
++		}
++	}
++
++	DWC_SPINUNLOCK(ep->pcd->lock);
++
++	/* Call the completion function in the non-portable logic */
++	ep->pcd->fops->xisoc_complete(ep->pcd, ep->priv, req->priv, 0,
++				      &req->ext_req);
++
++	DWC_SPINLOCK(ep->pcd->lock);
++
++	/* Free the request - specific freeing needed for extended request object */
++	dwc_pcd_xiso_ereq_free(ep, req);
++
++	/* Start the next request */
++	dwc_otg_pcd_xiso_start_next_request(ep->pcd, ep);
++
++	return;
++}
++
++/**
++ * Create and initialize the Isoc pkt descriptors of the extended request.
++ *
++ */
++static int dwc_otg_pcd_xiso_create_pkt_descs(dwc_otg_pcd_request_t * req,
++					     void *ereq_nonport,
++					     int atomic_alloc)
++{
++	struct dwc_iso_xreq_port *ereq = NULL;
++	struct dwc_iso_xreq_port *req_mapped = NULL;
++	struct dwc_iso_pkt_desc_port *ipds = NULL;	/* To be created in this function */
++	uint32_t pkt_count;
++	int i;
++
++	ereq = &req->ext_req;
++	req_mapped = (struct dwc_iso_xreq_port *)ereq_nonport;
++	pkt_count = req_mapped->pio_pkt_count;
++
++	/* Create the isoc descs */
++	if (atomic_alloc) {
++		ipds = DWC_ALLOC_ATOMIC(sizeof(*ipds) * pkt_count);
++	} else {
++		ipds = DWC_ALLOC(sizeof(*ipds) * pkt_count);
++	}
++
++	if (!ipds) {
++		DWC_ERROR("Failed to allocate isoc descriptors");
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Initialize the extended request fields */
++	ereq->per_io_frame_descs = ipds;
++	ereq->error_count = 0;
++	ereq->pio_alloc_pkt_count = pkt_count;
++	ereq->pio_pkt_count = pkt_count;
++	ereq->tr_sub_flags = req_mapped->tr_sub_flags;
++
++	/* Init the Isoc descriptors */
++	for (i = 0; i < pkt_count; i++) {
++		ipds[i].length = req_mapped->per_io_frame_descs[i].length;
++		ipds[i].offset = req_mapped->per_io_frame_descs[i].offset;
++		ipds[i].status = req_mapped->per_io_frame_descs[i].status;	/* 0 */
++		ipds[i].actual_length =
++		    req_mapped->per_io_frame_descs[i].actual_length;
++	}
++
++	return 0;
++}
++
++static void prn_ext_request(struct dwc_iso_xreq_port *ereq)
++{
++	struct dwc_iso_pkt_desc_port *xfd = NULL;
++	int i;
++
++	DWC_DEBUG("per_io_frame_descs=%p", ereq->per_io_frame_descs);
++	DWC_DEBUG("tr_sub_flags=%d", ereq->tr_sub_flags);
++	DWC_DEBUG("error_count=%d", ereq->error_count);
++	DWC_DEBUG("pio_alloc_pkt_count=%d", ereq->pio_alloc_pkt_count);
++	DWC_DEBUG("pio_pkt_count=%d", ereq->pio_pkt_count);
++	DWC_DEBUG("res=%d", ereq->res);
++
++	for (i = 0; i < ereq->pio_pkt_count; i++) {
++		xfd = &ereq->per_io_frame_descs[0];
++		DWC_DEBUG("FD #%d", i);
++
++		DWC_DEBUG("xfd->actual_length=%d", xfd->actual_length);
++		DWC_DEBUG("xfd->length=%d", xfd->length);
++		DWC_DEBUG("xfd->offset=%d", xfd->offset);
++		DWC_DEBUG("xfd->status=%d", xfd->status);
++	}
++}
++
++/**
++ *
++ */
++int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			      uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			      int zero, void *req_handle, int atomic_alloc,
++			      void *ereq_nonport)
++{
++	dwc_otg_pcd_request_t *req = NULL;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int res;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	/* We support this extension only for DDMA mode */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++		if (!GET_CORE_IF(pcd)->dma_desc_enable)
++			return -DWC_E_INVALID;
++
++	/* Create a dwc_otg_pcd_request_t object */
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++
++	/* Create the Isoc descs for this request which shall be the exact match
++	 * of the structure sent to us from the non-portable logic */
++	res =
++	    dwc_otg_pcd_xiso_create_pkt_descs(req, ereq_nonport, atomic_alloc);
++	if (res) {
++		DWC_WARN("Failed to init the Isoc descriptors");
++		DWC_FREE(req);
++		return res;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++
++	//DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	ep->dwc_ep.dma_addr = dma_buf;
++	ep->dwc_ep.start_xfer_buff = buf;
++	ep->dwc_ep.xfer_buff = buf;
++	ep->dwc_ep.xfer_len = 0;
++	ep->dwc_ep.xfer_count = 0;
++	ep->dwc_ep.sent_zlp = 0;
++	ep->dwc_ep.total_len = buflen;
++
++	/* Add this request to the tail */
++	DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++	ep->dwc_ep.xiso_queued_xfers++;
++
++//DWC_DEBUG("CP_0");
++//DWC_DEBUG("req->ext_req.tr_sub_flags=%d", req->ext_req.tr_sub_flags);
++//prn_ext_request((struct dwc_iso_xreq_port *) ereq_nonport);
++//prn_ext_request(&req->ext_req);
++
++	//DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	/* If the req->status == ASAP  then check if there is any active transfer
++	 * for this endpoint. If no active transfers, then get the first entry
++	 * from the queue and start that transfer
++	 */
++	if (req->ext_req.tr_sub_flags == DWC_EREQ_TF_ASAP) {
++		res = dwc_otg_pcd_xiso_start_next_request(pcd, ep);
++		if (res) {
++			DWC_WARN("Failed to start the next Isoc transfer");
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++			DWC_FREE(req);
++			return res;
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	return 0;
++}
++
++#endif
++/* END ifdef DWC_UTE_PER_IO ***************************************************/
++int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			 uint8_t * buf, dwc_dma_t dma_buf, uint32_t buflen,
++			 int zero, void *req_handle, int atomic_alloc)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t max_transfer;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad ep\n");
++		return -DWC_E_INVALID;
++	}
++
++	if (atomic_alloc) {
++		req = DWC_ALLOC_ATOMIC(sizeof(*req));
++	} else {
++		req = DWC_ALLOC(sizeof(*req));
++	}
++
++	if (!req) {
++		return -DWC_E_NO_MEMORY;
++	}
++	DWC_CIRCLEQ_INIT_ENTRY(req, queue_entry);
++	if (!GET_CORE_IF(pcd)->core_params->opt) {
++		if (ep->dwc_ep.num != 0) {
++			DWC_ERROR("queue req %p, len %d buf %p\n",
++				  req_handle, buflen, buf);
++		}
++	}
++
++	req->buf = buf;
++	req->dma = dma_buf;
++	req->length = buflen;
++	req->sent_zlp = zero;
++	req->priv = req_handle;
++	req->dw_align_buf = NULL;
++	if ((dma_buf & 0x3) && GET_CORE_IF(pcd)->dma_enable
++			&& !GET_CORE_IF(pcd)->dma_desc_enable)
++		req->dw_align_buf = DWC_DMA_ALLOC(buflen,
++				 &req->dw_align_buf_dma);
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/*
++	 * After adding request to the queue for IN ISOC wait for In Token Received
++	 * when TX FIFO is empty interrupt and for OUT ISOC wait for OUT Token
++	 * Received when EP is disabled interrupt to obtain starting microframe
++	 * (odd/even) start transfer
++	 */
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		if (req != 0) {
++			depctl_data_t depctl = {.d32 =
++				    DWC_READ_REG32(&pcd->core_if->dev_if->
++						   in_ep_regs[ep->dwc_ep.num]->
++						   diepctl) };
++			++pcd->request_pending;
++
++			DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++			if (ep->dwc_ep.is_in) {
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&pcd->core_if->dev_if->
++						in_ep_regs[ep->dwc_ep.num]->
++						diepctl, depctl.d32);
++			}
++
++			DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		}
++		return 0;
++	}
++
++	/*
++	 * For EP0 IN without premature status, zlp is required?
++	 */
++	if (ep->dwc_ep.num == 0 && ep->dwc_ep.is_in) {
++		DWC_DEBUGPL(DBG_PCDV, "%d-OUT ZLP\n", ep->dwc_ep.num);
++		//_req->zero = 1;
++	}
++
++	/* Start the transfer */
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue) && !ep->stopped) {
++		/* EP0 Transfer? */
++		if (ep->dwc_ep.num == 0) {
++			switch (pcd->ep0state) {
++			case EP0_IN_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_DATA_PHASE\n",
++					    __func__);
++				break;
++
++			case EP0_OUT_DATA_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_OUT_DATA_PHASE\n",
++					    __func__);
++				if (pcd->request_config) {
++					/* Complete STATUS PHASE */
++					ep->dwc_ep.is_in = 1;
++					pcd->ep0state = EP0_IN_STATUS_PHASE;
++				}
++				break;
++
++			case EP0_IN_STATUS_PHASE:
++				DWC_DEBUGPL(DBG_PCD,
++					    "%s ep0: EP0_IN_STATUS_PHASE\n",
++					    __func__);
++				break;
++
++			default:
++				DWC_DEBUGPL(DBG_ANY, "ep0: odd state %d\n",
++					    pcd->ep0state);
++				DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++				return -DWC_E_SHUTDOWN;
++			}
++
++			ep->dwc_ep.dma_addr = dma_buf;
++			ep->dwc_ep.start_xfer_buff = buf;
++			ep->dwc_ep.xfer_buff = buf;
++			ep->dwc_ep.xfer_len = buflen;
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = ep->dwc_ep.xfer_len;
++
++			if (zero) {
++				if ((ep->dwc_ep.xfer_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.xfer_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++
++			dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++						   &ep->dwc_ep);
++		}		// non-ep0 endpoints
++		else {
++#ifdef DWC_UTE_CFI
++			if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++				/* store the request length */
++				ep->dwc_ep.cfi_req_len = buflen;
++				pcd->cfi->ops.build_descriptors(pcd->cfi, pcd,
++								ep, req);
++			} else {
++#endif
++				max_transfer =
++				    GET_CORE_IF(ep->pcd)->core_params->
++				    max_transfer_size;
++
++				/* Setup and start the Transfer */
++				if (req->dw_align_buf){
++					if (ep->dwc_ep.is_in)
++						dwc_memcpy(req->dw_align_buf,
++							   buf, buflen);
++					ep->dwc_ep.dma_addr =
++					    req->dw_align_buf_dma;
++					ep->dwc_ep.start_xfer_buff =
++					    req->dw_align_buf;
++					ep->dwc_ep.xfer_buff =
++					    req->dw_align_buf;
++				} else {
++					ep->dwc_ep.dma_addr = dma_buf;
++					ep->dwc_ep.start_xfer_buff = buf;
++                                        ep->dwc_ep.xfer_buff = buf;
++				}
++				ep->dwc_ep.xfer_len = 0;
++				ep->dwc_ep.xfer_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++				ep->dwc_ep.total_len = buflen;
++
++				ep->dwc_ep.maxxfer = max_transfer;
++				if (GET_CORE_IF(pcd)->dma_desc_enable) {
++					uint32_t out_max_xfer =
++					    DDMA_MAX_TRANSFER_SIZE -
++					    (DDMA_MAX_TRANSFER_SIZE % 4);
++					if (ep->dwc_ep.is_in) {
++						if (ep->dwc_ep.maxxfer >
++						    DDMA_MAX_TRANSFER_SIZE) {
++							ep->dwc_ep.maxxfer =
++							    DDMA_MAX_TRANSFER_SIZE;
++						}
++					} else {
++						if (ep->dwc_ep.maxxfer >
++						    out_max_xfer) {
++							ep->dwc_ep.maxxfer =
++							    out_max_xfer;
++						}
++					}
++				}
++				if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++					ep->dwc_ep.maxxfer -=
++					    (ep->dwc_ep.maxxfer %
++					     ep->dwc_ep.maxpacket);
++				}
++
++				if (zero) {
++					if ((ep->dwc_ep.total_len %
++					     ep->dwc_ep.maxpacket == 0)
++					    && (ep->dwc_ep.total_len != 0)) {
++						ep->dwc_ep.sent_zlp = 1;
++					}
++				}
++#ifdef DWC_UTE_CFI
++			}
++#endif
++			dwc_otg_ep_start_transfer(GET_CORE_IF(pcd),
++						  &ep->dwc_ep);
++		}
++	}
++
++	if (req != 0) {
++		++pcd->request_pending;
++		DWC_CIRCLEQ_INSERT_TAIL(&ep->queue, req, queue_entry);
++		if (ep->dwc_ep.is_in && ep->stopped
++		    && !(GET_CORE_IF(pcd)->dma_enable)) {
++			/** @todo NGS Create a function for this. */
++			diepmsk_data_t diepmsk = {.d32 = 0 };
++			diepmsk.b.intktxfemp = 1;
++			if (GET_CORE_IF(pcd)->multiproc_int_enable) {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->diepeachintmsk
++						 [ep->dwc_ep.num], 0,
++						 diepmsk.d32);
++			} else {
++				DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->
++						 dev_if->dev_global_regs->
++						 diepmsk, 0, diepmsk.d32);
++			}
++
++		}
++	}
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return 0;
++}
++
++int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle)
++{
++	dwc_irqflags_t flags;
++	dwc_otg_pcd_request_t *req;
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++	if (!ep || (!ep->desc && ep->dwc_ep.num != 0)) {
++		DWC_WARN("bad argument\n");
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++
++	/* make sure it's actually queued on this endpoint */
++	DWC_CIRCLEQ_FOREACH(req, &ep->queue, queue_entry) {
++		if (req->priv == (void *)req_handle) {
++			break;
++		}
++	}
++
++	if (req->priv != (void *)req_handle) {
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++		return -DWC_E_INVALID;
++	}
++
++	if (!DWC_CIRCLEQ_EMPTY_ENTRY(req, queue_entry)) {
++		dwc_otg_request_done(ep, req, -DWC_E_RESTART);
++	} else {
++		req = NULL;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return req ? 0 : -DWC_E_SHUTDOWN;
++
++}
++
++/**
++ * dwc_otg_pcd_ep_wedge - sets the halt feature and ignores clear requests
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative DWC error code.
++ */
++int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if ((!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else {
++                /* This code needs to be reviewed */
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   core_global_regs->dtxfsiz[ep->dwc_ep.
++								     tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->
++					   dev_if->in_ep_regs[ep->dwc_ep.num]->
++					   dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++
++int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value)
++{
++	dwc_otg_pcd_ep_t *ep;
++	dwc_irqflags_t flags;
++	int retval = 0;
++
++	ep = get_ep_from_handle(pcd, ep_handle);
++
++	if (!ep || (!ep->desc && ep != &pcd->ep0) ||
++	    (ep->desc && (ep->desc->bmAttributes == UE_ISOCHRONOUS))) {
++		DWC_WARN("%s, bad ep\n", __func__);
++		return -DWC_E_INVALID;
++	}
++
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		DWC_WARN("%d %s XFer In process\n", ep->dwc_ep.num,
++			 ep->dwc_ep.is_in ? "IN" : "OUT");
++		retval = -DWC_E_AGAIN;
++	} else if (value == 0) {
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++	} else if (value == 1) {
++		if (ep->dwc_ep.is_in == 1 && GET_CORE_IF(pcd)->dma_desc_enable) {
++			dtxfsts_data_t txstatus;
++			fifosize_data_t txfifosize;
++
++			txfifosize.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->core_global_regs->
++					   dtxfsiz[ep->dwc_ep.tx_fifo_num]);
++			txstatus.d32 =
++			    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++					   in_ep_regs[ep->dwc_ep.num]->dtxfsts);
++
++			if (txstatus.b.txfspcavail < txfifosize.b.depth) {
++				DWC_WARN("%s() Data In Tx Fifo\n", __func__);
++				retval = -DWC_E_AGAIN;
++			} else {
++				if (ep->dwc_ep.num == 0) {
++					pcd->ep0state = EP0_STALL;
++				}
++
++				ep->stopped = 1;
++				dwc_otg_ep_set_stall(GET_CORE_IF(pcd),
++						     &ep->dwc_ep);
++			}
++		} else {
++			if (ep->dwc_ep.num == 0) {
++				pcd->ep0state = EP0_STALL;
++			}
++
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++		}
++	} else if (value == 2) {
++		ep->dwc_ep.stall_clear_flag = 0;
++	} else if (value == 3) {
++		ep->dwc_ep.stall_clear_flag = 1;
++	}
++
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++
++	return retval;
++}
++
++/**
++ * This function initiates remote wakeup of the host from suspend state.
++ */
++void dwc_otg_pcd_rem_wkup_from_suspend(dwc_otg_pcd_t * pcd, int set)
++{
++	dctl_data_t dctl = { 0 };
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dsts_data_t dsts;
++
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++	if (!dsts.b.suspsts) {
++		DWC_WARN("Remote wakeup while is not in suspend state\n");
++	}
++	/* Check if DEVICE_REMOTE_WAKEUP feature enabled */
++	if (pcd->remote_wakeup_enable) {
++		if (set) {
++
++			if (core_if->adp_enable) {
++				gpwrdn_data_t gpwrdn;
++
++				dwc_otg_adp_probe_stop(core_if);
++
++				/* Mask SRP detected interrupt from Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.srp_det_msk = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/* Disable Power Down Logic */
++				gpwrdn.d32 = 0;
++				gpwrdn.b.pmuactv = 1;
++				DWC_MODIFY_REG32(&core_if->
++						 core_global_regs->gpwrdn,
++						 gpwrdn.d32, 0);
++
++				/*
++				 * Initialize the Core for Device mode.
++				 */
++				core_if->op_state = B_PERIPHERAL;
++				dwc_otg_core_init(core_if);
++				dwc_otg_enable_global_interrupts(core_if);
++				cil_pcd_start(core_if);
++
++				dwc_otg_initiate_srp(core_if);
++			}
++
++			dctl.b.rmtwkupsig = 1;
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, 0, dctl.d32);
++			DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++
++			dwc_mdelay(2);
++			DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++					 dctl, dctl.d32, 0);
++			DWC_DEBUGPL(DBG_PCD, "Clear Remote Wakeup\n");
++		}
++	} else {
++		DWC_DEBUGPL(DBG_PCD, "Remote Wakeup is disabled\n");
++	}
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++/**
++ * This function initiates remote wakeup of the host from L1 sleep state.
++ */
++void dwc_otg_pcd_rem_wkup_from_sleep(dwc_otg_pcd_t * pcd, int set)
++{
++	glpmcfg_data_t lpmcfg;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++
++	/* Check if we are in L1 state */
++	if (!lpmcfg.b.prt_sleep_sts) {
++		DWC_DEBUGPL(DBG_PCD, "Device is not in sleep state\n");
++		return;
++	}
++
++	/* Check if host allows remote wakeup */
++	if (!lpmcfg.b.rem_wkup_en) {
++		DWC_DEBUGPL(DBG_PCD, "Host does not allow remote wakeup\n");
++		return;
++	}
++
++	/* Check if Resume OK */
++	if (!lpmcfg.b.sleep_state_resumeok) {
++		DWC_DEBUGPL(DBG_PCD, "Sleep state resume is not OK\n");
++		return;
++	}
++
++	lpmcfg.d32 = DWC_READ_REG32(&core_if->core_global_regs->glpmcfg);
++	lpmcfg.b.en_utmi_sleep = 0;
++	lpmcfg.b.hird_thres &= (~(1 << 4));
++	DWC_WRITE_REG32(&core_if->core_global_regs->glpmcfg, lpmcfg.d32);
++
++	if (set) {
++		dctl_data_t dctl = {.d32 = 0 };
++		dctl.b.rmtwkupsig = 1;
++		/* Set RmtWkUpSig bit to start remote wakup signaling.
++		 * Hardware will automatically clear this bit.
++		 */
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl,
++				 0, dctl.d32);
++		DWC_DEBUGPL(DBG_PCD, "Set Remote Wakeup\n");
++	}
++
++}
++#endif
++
++/**
++ * Performs remote wakeup.
++ */
++void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_irqflags_t flags;
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		if (core_if->lx_state == DWC_OTG_L1) {
++			dwc_otg_pcd_rem_wkup_from_sleep(pcd, set);
++		} else {
++#endif
++			dwc_otg_pcd_rem_wkup_from_suspend(pcd, set);
++#ifdef CONFIG_USB_DWC_OTG_LPM
++		}
++#endif
++		DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++	}
++	return;
++}
++
++void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl = { 0 };
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		dctl.b.sftdiscon = 1;
++		DWC_PRINTF("Soft disconnect for %d useconds\n",no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, 0, dctl.d32);
++		dwc_udelay(no_of_usecs);
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32,0);
++
++	} else{
++		DWC_PRINTF("NOT SUPPORTED IN HOST MODE\n");
++	}
++	return;
++
++}
++
++int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd)
++{
++	dsts_data_t dsts;
++	gotgctl_data_t gotgctl;
++
++	/*
++	 * This function starts the Protocol if no session is in progress. If
++	 * a session is already in progress, but the device is suspended,
++	 * remote wakeup signaling is started.
++	 */
++
++	/* Check if valid session */
++	gotgctl.d32 =
++	    DWC_READ_REG32(&(GET_CORE_IF(pcd)->core_global_regs->gotgctl));
++	if (gotgctl.b.bsesvld) {
++		/* Check if suspend state */
++		dsts.d32 =
++		    DWC_READ_REG32(&
++				   (GET_CORE_IF(pcd)->dev_if->
++				    dev_global_regs->dsts));
++		if (dsts.b.suspsts) {
++			dwc_otg_pcd_remote_wakeup(pcd, 1);
++		}
++	} else {
++		dwc_otg_pcd_initiate_srp(pcd);
++	}
++
++	return 0;
++
++}
++
++/**
++ * Start the SRP timer to detect when the SRP does not complete within
++ * 6 seconds.
++ *
++ * @param pcd the pcd structure.
++ */
++void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd)
++{
++	dwc_irqflags_t flags;
++	DWC_SPINLOCK_IRQSAVE(pcd->lock, &flags);
++	dwc_otg_initiate_srp(GET_CORE_IF(pcd));
++	DWC_SPINUNLOCK_IRQRESTORE(pcd->lock, flags);
++}
++
++int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd)
++{
++	return dwc_otg_get_frame_number(GET_CORE_IF(pcd));
++}
++
++int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd)
++{
++	return GET_CORE_IF(pcd)->core_params->lpm_enable;
++}
++
++uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->b_hnp_enable;
++}
++
++uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_hnp_support;
++}
++
++uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd)
++{
++	return pcd->a_alt_hnp_support;
++}
++
++int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd)
++{
++	return pcd->remote_wakeup_enable;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd.h b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
+new file mode 100644
+index 0000000..8ef7ba6
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd.h
+@@ -0,0 +1,266 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd.h $
++ * $Revision: #48 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++#if !defined(__DWC_PCD_H__)
++#define __DWC_PCD_H__
++
++#include "dwc_otg_os_dep.h"
++#include "usb.h"
++#include "dwc_otg_cil.h"
++#include "dwc_otg_pcd_if.h"
++struct cfiobject;
++
++/**
++ * @file
++ *
++ * This file contains the structures, constants, and interfaces for
++ * the Perpherial Contoller Driver (PCD).
++ *
++ * The Peripheral Controller Driver (PCD) for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used. For
++ * the Mass Storage Function driver the File-backed USB Storage Gadget
++ * (FBS) driver will be used.  The FBS driver supports the
++ * Control-Bulk (CB), Control-Bulk-Interrupt (CBI), and Bulk-Only
++ * transports.
++ *
++ */
++
++/** Invalid DMA Address */
++#define DWC_DMA_ADDR_INVALID	(~(dwc_dma_t)0)
++
++/** Max Transfer size for any EP */
++#define DDMA_MAX_TRANSFER_SIZE 65535
++
++/**
++ * Get the pointer to the core_if from the pcd pointer.
++ */
++#define GET_CORE_IF( _pcd ) (_pcd->core_if)
++
++/**
++ * States of EP0.
++ */
++typedef enum ep0_state {
++	EP0_DISCONNECT,		/* no host */
++	EP0_IDLE,
++	EP0_IN_DATA_PHASE,
++	EP0_OUT_DATA_PHASE,
++	EP0_IN_STATUS_PHASE,
++	EP0_OUT_STATUS_PHASE,
++	EP0_STALL,
++} ep0state_e;
++
++/** Fordward declaration.*/
++struct dwc_otg_pcd;
++
++/** DWC_otg iso request structure.
++ *
++ */
++typedef struct usb_iso_request dwc_otg_pcd_iso_request_t;
++
++#ifdef DWC_UTE_PER_IO
++
++/**
++ * This shall be the exact analogy of the same type structure defined in the
++ * usb_gadget.h. Each descriptor contains
++ */
++struct dwc_iso_pkt_desc_port {
++	uint32_t offset;
++	uint32_t length;	/* expected length */
++	uint32_t actual_length;
++	uint32_t status;
++};
++
++struct dwc_iso_xreq_port {
++	/** transfer/submission flag */
++	uint32_t tr_sub_flags;
++	/** Start the request ASAP */
++#define DWC_EREQ_TF_ASAP		0x00000002
++	/** Just enqueue the request w/o initiating a transfer */
++#define DWC_EREQ_TF_ENQUEUE		0x00000004
++
++	/**
++	* count of ISO packets attached to this request - shall
++	* not exceed the pio_alloc_pkt_count
++	*/
++	uint32_t pio_pkt_count;
++	/** count of ISO packets allocated for this request */
++	uint32_t pio_alloc_pkt_count;
++	/** number of ISO packet errors */
++	uint32_t error_count;
++	/** reserved for future extension */
++	uint32_t res;
++	/** Will be allocated and freed in the UTE gadget and based on the CFC value */
++	struct dwc_iso_pkt_desc_port *per_io_frame_descs;
++};
++#endif
++/** DWC_otg request structure.
++ * This structure is a list of requests.
++ */
++typedef struct dwc_otg_pcd_request {
++	void *priv;
++	void *buf;
++	dwc_dma_t dma;
++	uint32_t length;
++	uint32_t actual;
++	unsigned sent_zlp:1;
++    /**
++     * Used instead of original buffer if
++     * it(physical address) is not dword-aligned.
++     **/
++     uint8_t *dw_align_buf;
++     dwc_dma_t dw_align_buf_dma;
++
++	 DWC_CIRCLEQ_ENTRY(dwc_otg_pcd_request) queue_entry;
++#ifdef DWC_UTE_PER_IO
++	struct dwc_iso_xreq_port ext_req;
++	//void *priv_ereq_nport; /*  */
++#endif
++} dwc_otg_pcd_request_t;
++
++DWC_CIRCLEQ_HEAD(req_list, dwc_otg_pcd_request);
++
++/**	  PCD EP structure.
++ * This structure describes an EP, there is an array of EPs in the PCD
++ * structure.
++ */
++typedef struct dwc_otg_pcd_ep {
++	/** USB EP Descriptor */
++	const usb_endpoint_descriptor_t *desc;
++
++	/** queue of dwc_otg_pcd_requests. */
++	struct req_list queue;
++	unsigned stopped:1;
++	unsigned disabling:1;
++	unsigned dma:1;
++	unsigned queue_sof:1;
++
++#ifdef DWC_EN_ISOC
++	/** ISOC req handle passed */
++	void *iso_req_handle;
++#endif				//_EN_ISOC_
++
++	/** DWC_otg ep data. */
++	dwc_ep_t dwc_ep;
++
++	/** Pointer to PCD */
++	struct dwc_otg_pcd *pcd;
++
++	void *priv;
++} dwc_otg_pcd_ep_t;
++
++/** DWC_otg PCD Structure.
++ * This structure encapsulates the data for the dwc_otg PCD.
++ */
++struct dwc_otg_pcd {
++	const struct dwc_otg_pcd_function_ops *fops;
++	/** The DWC otg device pointer */
++	struct dwc_otg_device *otg_dev;
++	/** Core Interface */
++	dwc_otg_core_if_t *core_if;
++	/** State of EP0 */
++	ep0state_e ep0state;
++	/** EP0 Request is pending */
++	unsigned ep0_pending:1;
++	/** Indicates when SET CONFIGURATION Request is in process */
++	unsigned request_config:1;
++	/** The state of the Remote Wakeup Enable. */
++	unsigned remote_wakeup_enable:1;
++	/** The state of the B-Device HNP Enable. */
++	unsigned b_hnp_enable:1;
++	/** The state of A-Device HNP Support. */
++	unsigned a_hnp_support:1;
++	/** The state of the A-Device Alt HNP support. */
++	unsigned a_alt_hnp_support:1;
++	/** Count of pending Requests */
++	unsigned request_pending;
++
++	/** SETUP packet for EP0
++	 * This structure is allocated as a DMA buffer on PCD initialization
++	 * with enough space for up to 3 setup packets.
++	 */
++	union {
++		usb_device_request_t req;
++		uint32_t d32[2];
++	} *setup_pkt;
++
++	dwc_dma_t setup_pkt_dma_handle;
++
++	/* Additional buffer and flag for CTRL_WR premature case */
++	uint8_t *backup_buf;
++	unsigned data_terminated;
++
++	/** 2-byte dma buffer used to return status from GET_STATUS */
++	uint16_t *status_buf;
++	dwc_dma_t status_buf_dma_handle;
++
++	/** EP0 */
++	dwc_otg_pcd_ep_t ep0;
++
++	/** Array of IN EPs. */
++	dwc_otg_pcd_ep_t in_ep[MAX_EPS_CHANNELS - 1];
++	/** Array of OUT EPs. */
++	dwc_otg_pcd_ep_t out_ep[MAX_EPS_CHANNELS - 1];
++	/** number of valid EPs in the above array. */
++//        unsigned      num_eps : 4;
++	dwc_spinlock_t *lock;
++
++	/** Tasklet to defer starting of TEST mode transmissions until
++	 *	Status Phase has been completed.
++	 */
++	dwc_tasklet_t *test_mode_tasklet;
++
++	/** Tasklet to delay starting of xfer in DMA mode */
++	dwc_tasklet_t *start_xfer_tasklet;
++
++	/** The test mode to enter when the tasklet is executed. */
++	unsigned test_mode;
++	/** The cfi_api structure that implements most of the CFI API
++	 * and OTG specific core configuration functionality
++	 */
++#ifdef DWC_UTE_CFI
++	struct cfiobject *cfi;
++#endif
++
++};
++
++//FIXME this functions should be static, and this prototypes should be removed
++extern void dwc_otg_request_nuke(dwc_otg_pcd_ep_t * ep);
++extern void dwc_otg_request_done(dwc_otg_pcd_ep_t * ep,
++				 dwc_otg_pcd_request_t * req, int32_t status);
++
++void dwc_otg_iso_buffer_done(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep,
++			     void *req_handle);
++
++extern void do_test_mode(void *data);
++#endif
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
+new file mode 100644
+index 0000000..c8d2e0e
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_if.h
+@@ -0,0 +1,360 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_if.h $
++ * $Revision: #11 $
++ * $Date: 2011/10/26 $
++ * $Change: 1873028 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#if !defined(__DWC_PCD_IF_H__)
++#define __DWC_PCD_IF_H__
++
++//#include "dwc_os.h"
++#include "dwc_otg_core_if.h"
++
++/** @file
++ * This file defines DWC_OTG PCD Core API.
++ */
++
++struct dwc_otg_pcd;
++typedef struct dwc_otg_pcd dwc_otg_pcd_t;
++
++/** Maxpacket size for EP0 */
++#define MAX_EP0_SIZE	64
++/** Maxpacket size for any EP */
++#define MAX_PACKET_SIZE 1024
++
++/** @name Function Driver Callbacks */
++/** @{ */
++
++/** This function will be called whenever a previously queued request has
++ * completed.  The status value will be set to -DWC_E_SHUTDOWN to indicated a
++ * failed or aborted transfer, or -DWC_E_RESTART to indicate the device was reset,
++ * or -DWC_E_TIMEOUT to indicate it timed out, or -DWC_E_INVALID to indicate invalid
++ * parameters. */
++typedef int (*dwc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				    void *req_handle, int32_t status,
++				    uint32_t actual);
++/**
++ * This function will be called whenever a previousle queued ISOC request has
++ * completed. Count of ISOC packets could be read using dwc_otg_pcd_get_iso_packet_count
++ * function.
++ * The status of each ISOC packet could be read using dwc_otg_pcd_get_iso_packet_*
++ * functions.
++ */
++typedef int (*dwc_isoc_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++					 void *req_handle, int proc_buf_num);
++/** This function should handle any SETUP request that cannot be handled by the
++ * PCD Core.  This includes most GET_DESCRIPTORs, SET_CONFIGS, Any
++ * class-specific requests, etc.  The function must non-blocking.
++ *
++ * Returns 0 on success.
++ * Returns -DWC_E_NOT_SUPPORTED if the request is not supported.
++ * Returns -DWC_E_INVALID if the setup request had invalid parameters or bytes.
++ * Returns -DWC_E_SHUTDOWN on any other error. */
++typedef int (*dwc_setup_cb_t) (dwc_otg_pcd_t * pcd, uint8_t * bytes);
++/** This is called whenever the device has been disconnected.  The function
++ * driver should take appropriate action to clean up all pending requests in the
++ * PCD Core, remove all endpoints (except ep0), and initialize back to reset
++ * state. */
++typedef int (*dwc_disconnect_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been connected. */
++typedef int (*dwc_connect_cb_t) (dwc_otg_pcd_t * pcd, int speed);
++/** This function is called when device has been suspended */
++typedef int (*dwc_suspend_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has received LPM tokens, i.e.
++ * device has been sent to sleep state. */
++typedef int (*dwc_sleep_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called when device has been resumed
++ * from suspend(L2) or L1 sleep state. */
++typedef int (*dwc_resume_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever hnp params has been changed.
++ * User can call get_b_hnp_enable, get_a_hnp_support, get_a_alt_hnp_support functions
++ * to get hnp parameters. */
++typedef int (*dwc_hnp_params_changed_cb_t) (dwc_otg_pcd_t * pcd);
++/** This function is called whenever USB RESET is detected. */
++typedef int (*dwc_reset_cb_t) (dwc_otg_pcd_t * pcd);
++
++typedef int (*cfi_setup_cb_t) (dwc_otg_pcd_t * pcd, void *ctrl_req_bytes);
++
++/**
++ *
++ * @param ep_handle	Void pointer to the usb_ep structure
++ * @param ereq_port Pointer to the extended request structure created in the
++ *					portable part.
++ */
++typedef int (*xiso_completion_cb_t) (dwc_otg_pcd_t * pcd, void *ep_handle,
++				     void *req_handle, int32_t status,
++				     void *ereq_port);
++/** Function Driver Ops Data Structure */
++struct dwc_otg_pcd_function_ops {
++	dwc_connect_cb_t connect;
++	dwc_disconnect_cb_t disconnect;
++	dwc_setup_cb_t setup;
++	dwc_completion_cb_t complete;
++	dwc_isoc_completion_cb_t isoc_complete;
++	dwc_suspend_cb_t suspend;
++	dwc_sleep_cb_t sleep;
++	dwc_resume_cb_t resume;
++	dwc_reset_cb_t reset;
++	dwc_hnp_params_changed_cb_t hnp_changed;
++	cfi_setup_cb_t cfi_setup;
++#ifdef DWC_UTE_PER_IO
++	xiso_completion_cb_t xisoc_complete;
++#endif
++};
++/** @} */
++
++/** @name Function Driver Functions */
++/** @{ */
++
++/** Call this function to get pointer on dwc_otg_pcd_t,
++ * this pointer will be used for all PCD API functions.
++ *
++ * @param core_if The DWC_OTG Core
++ */
++extern dwc_otg_pcd_t *dwc_otg_pcd_init(dwc_otg_core_if_t * core_if);
++
++/** Frees PCD allocated by dwc_otg_pcd_init
++ *
++ * @param pcd The PCD
++ */
++extern void dwc_otg_pcd_remove(dwc_otg_pcd_t * pcd);
++
++/** Call this to bind the function driver to the PCD Core.
++ *
++ * @param pcd Pointer on dwc_otg_pcd_t returned by dwc_otg_pcd_init function.
++ * @param fops The Function Driver Ops data structure containing pointers to all callbacks.
++ */
++extern void dwc_otg_pcd_start(dwc_otg_pcd_t * pcd,
++			      const struct dwc_otg_pcd_function_ops *fops);
++
++/** Enables an endpoint for use.  This function enables an endpoint in
++ * the PCD.  The endpoint is described by the ep_desc which has the
++ * same format as a USB ep descriptor.  The ep_handle parameter is used to refer
++ * to the endpoint from other API functions and in callbacks.  Normally this
++ * should be called after a SET_CONFIGURATION/SET_INTERFACE to configure the
++ * core for that interface.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success.
++ *
++ * @param pcd The PCD
++ * @param ep_desc Endpoint descriptor
++ * @param usb_ep Handle on endpoint, that will be used to identify endpoint.
++ */
++extern int dwc_otg_pcd_ep_enable(dwc_otg_pcd_t * pcd,
++				 const uint8_t * ep_desc, void *usb_ep);
++
++/** Disable the endpoint referenced by ep_handle.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error occurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_disable(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** Queue a data transfer request on the endpoint referenced by ep_handle.
++ * After the transfer is completes, the complete callback will be called with
++ * the request status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf The buffer for the data
++ * @param dma_buf The DMA buffer for the data
++ * @param buflen The length of the data transfer
++ * @param zero Specifies whether to send zero length last packet.
++ * @param req_handle Set this handle to any value to use to reference this
++ * request in the ep_dequeue function or from the complete callback
++ * @param atomic_alloc If driver need to perform atomic allocations
++ * for internal data structures.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				uint8_t * buf, dwc_dma_t dma_buf,
++				uint32_t buflen, int zero, void *req_handle,
++				int atomic_alloc);
++#ifdef DWC_UTE_PER_IO
++/**
++ *
++ * @param ereq_nonport	Pointer to the extended request part of the
++ *						usb_request structure defined in usb_gadget.h file.
++ */
++extern int dwc_otg_pcd_xiso_ep_queue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				     uint8_t * buf, dwc_dma_t dma_buf,
++				     uint32_t buflen, int zero,
++				     void *req_handle, int atomic_alloc,
++				     void *ereq_nonport);
++
++#endif
++
++/** De-queue the specified data transfer that has not yet completed.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_dequeue(dwc_otg_pcd_t * pcd, void *ep_handle,
++				  void *req_handle);
++
++/** Halt (STALL) an endpoint or clear it.
++ *
++ * Returns -DWC_E_INVALID if invalid parameters were passed.
++ * Returns -DWC_E_SHUTDOWN if any other error ocurred.
++ * Returns -DWC_E_AGAIN if the STALL cannot be sent and must be tried again later
++ * Returns 0 on success. */
++extern int dwc_otg_pcd_ep_halt(dwc_otg_pcd_t * pcd, void *ep_handle, int value);
++
++/** This function */
++extern int dwc_otg_pcd_ep_wedge(dwc_otg_pcd_t * pcd, void *ep_handle);
++
++/** This function should be called on every hardware interrupt */
++extern int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd);
++
++/** This function returns current frame number */
++extern int dwc_otg_pcd_get_frame_number(dwc_otg_pcd_t * pcd);
++
++/**
++ * Start isochronous transfers on the endpoint referenced by ep_handle.
++ * For isochronous transfers duble buffering is used.
++ * After processing each of buffers comlete callback will be called with
++ * status for each transaction.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param buf0 The virtual address of first data buffer
++ * @param buf1 The virtual address of second data buffer
++ * @param dma0 The DMA address of first data buffer
++ * @param dma1 The DMA address of second data buffer
++ * @param sync_frame Data pattern frame number
++ * @param dp_frame Data size for pattern frame
++ * @param data_per_frame Data size for regular frame
++ * @param start_frame Frame number to start transfers, if -1 then start transfers ASAP.
++ * @param buf_proc_intrvl Interval of ISOC Buffer processing
++ * @param req_handle Handle of ISOC request
++ * @param atomic_alloc Specefies whether to perform atomic allocation for
++ * 			internal data structures.
++ *
++ * Returns -DWC_E_NO_MEMORY if there is no enough memory.
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function.
++ * Returns -DW_E_SHUTDOWN for any other error.
++ * Returns 0 on success
++ */
++extern int dwc_otg_pcd_iso_ep_start(dwc_otg_pcd_t * pcd, void *ep_handle,
++				    uint8_t * buf0, uint8_t * buf1,
++				    dwc_dma_t dma0, dwc_dma_t dma1,
++				    int sync_frame, int dp_frame,
++				    int data_per_frame, int start_frame,
++				    int buf_proc_intrvl, void *req_handle,
++				    int atomic_alloc);
++
++/** Stop ISOC transfers on endpoint referenced by ep_handle.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param req_handle Handle of ISOC request
++ *
++ * Returns -DWC_E_INVALID if incorrect arguments are passed to the function
++ * Returns 0 on success
++ */
++int dwc_otg_pcd_iso_ep_stop(dwc_otg_pcd_t * pcd, void *ep_handle,
++			    void *req_handle);
++
++/** Get ISOC packet status.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle Isochronoush request handle
++ * @param packet Number of packet
++ * @param status Out parameter for returning status
++ * @param actual Out parameter for returning actual length
++ * @param offset Out parameter for returning offset
++ *
++ */
++extern void dwc_otg_pcd_get_iso_packet_params(dwc_otg_pcd_t * pcd,
++					      void *ep_handle,
++					      void *iso_req_handle, int packet,
++					      int *status, int *actual,
++					      int *offset);
++
++/** Get ISOC packet count.
++ *
++ * @param pcd The PCD
++ * @param ep_handle The handle of the endpoint
++ * @param iso_req_handle
++ */
++extern int dwc_otg_pcd_get_iso_packet_count(dwc_otg_pcd_t * pcd,
++					    void *ep_handle,
++					    void *iso_req_handle);
++
++/** This function starts the SRP Protocol if no session is in progress. If
++ * a session is already in progress, but the device is suspended,
++ * remote wakeup signaling is started.
++ */
++extern int dwc_otg_pcd_wakeup(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if LPM support is enabled, and 0 otherwise. */
++extern int dwc_otg_pcd_is_lpm_enabled(dwc_otg_pcd_t * pcd);
++
++/** This function returns 1 if remote wakeup is allowed and 0, otherwise. */
++extern int dwc_otg_pcd_get_rmwkup_enable(dwc_otg_pcd_t * pcd);
++
++/** Initiate SRP */
++extern void dwc_otg_pcd_initiate_srp(dwc_otg_pcd_t * pcd);
++
++/** Starts remote wakeup signaling. */
++extern void dwc_otg_pcd_remote_wakeup(dwc_otg_pcd_t * pcd, int set);
++
++/** Starts micorsecond soft disconnect. */
++extern void dwc_otg_pcd_disconnect_us(dwc_otg_pcd_t * pcd, int no_of_usecs);
++/** This function returns whether device is dualspeed.*/
++extern uint32_t dwc_otg_pcd_is_dualspeed(dwc_otg_pcd_t * pcd);
++
++/** This function returns whether device is otg. */
++extern uint32_t dwc_otg_pcd_is_otg(dwc_otg_pcd_t * pcd);
++
++/** These functions allow to get hnp parameters */
++extern uint32_t get_b_hnp_enable(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_hnp_support(dwc_otg_pcd_t * pcd);
++extern uint32_t get_a_alt_hnp_support(dwc_otg_pcd_t * pcd);
++
++/** CFI specific Interface functions */
++/** Allocate a cfi buffer */
++extern uint8_t *cfiw_ep_alloc_buffer(dwc_otg_pcd_t * pcd, void *pep,
++				     dwc_dma_t * addr, size_t buflen,
++				     int flags);
++
++/******************************************************************************/
++
++/** @} */
++
++#endif				/* __DWC_PCD_IF_H__ */
++
++#endif				/* DWC_HOST_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
+new file mode 100644
+index 0000000..1b1f83c
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_intr.c
+@@ -0,0 +1,5147 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_intr.c $
++ * $Revision: #116 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++#include "dwc_otg_pcd.h"
++
++#ifdef DWC_UTE_CFI
++#include "dwc_otg_cfi.h"
++#endif
++
++#ifdef DWC_UTE_PER_IO
++extern void complete_xiso_ep(dwc_otg_pcd_ep_t * ep);
++#endif
++//#define PRINT_CFI_DMA_DESCS
++
++#define DEBUG_EP0
++
++/**
++ * This function updates OTG.
++ */
++static void dwc_otg_pcd_update_otg(dwc_otg_pcd_t * pcd, const unsigned reset)
++{
++
++	if (reset) {
++		pcd->b_hnp_enable = 0;
++		pcd->a_hnp_support = 0;
++		pcd->a_alt_hnp_support = 0;
++	}
++
++	if (pcd->fops->hnp_changed) {
++		pcd->fops->hnp_changed(pcd);
++	}
++}
++
++/** @file
++ * This file contains the implementation of the PCD Interrupt handlers.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ * All interrupt registers are processed from LSB to MSB.
++ */
++
++/**
++ * This function prints the ep0 state for debug purposes.
++ */
++static inline void print_ep0_state(dwc_otg_pcd_t * pcd)
++{
++#ifdef DEBUG
++	char str[40];
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		dwc_strcpy(str, "EP0_DISCONNECT");
++		break;
++	case EP0_IDLE:
++		dwc_strcpy(str, "EP0_IDLE");
++		break;
++	case EP0_IN_DATA_PHASE:
++		dwc_strcpy(str, "EP0_IN_DATA_PHASE");
++		break;
++	case EP0_OUT_DATA_PHASE:
++		dwc_strcpy(str, "EP0_OUT_DATA_PHASE");
++		break;
++	case EP0_IN_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_IN_STATUS_PHASE");
++		break;
++	case EP0_OUT_STATUS_PHASE:
++		dwc_strcpy(str, "EP0_OUT_STATUS_PHASE");
++		break;
++	case EP0_STALL:
++		dwc_strcpy(str, "EP0_STALL");
++		break;
++	default:
++		dwc_strcpy(str, "EP0_INVALID");
++	}
++
++	DWC_DEBUGPL(DBG_ANY, "%s(%d)\n", str, pcd->ep0state);
++#endif
++}
++
++/**
++ * This function calculate the size of the payload in the memory
++ * for out endpoints and prints size for debug purposes(used in
++ * 2.93a DevOutNak feature).
++ */
++static inline void print_memory_payload(dwc_otg_pcd_t * pcd,  dwc_ep_t * ep)
++{
++#ifdef DEBUG
++	deptsiz_data_t deptsiz_init = {.d32 = 0 };
++	deptsiz_data_t deptsiz_updt = {.d32 = 0 };
++	int pack_num;
++	unsigned payload;
++
++	deptsiz_init.d32 = pcd->core_if->start_doeptsiz_val[ep->num];
++	deptsiz_updt.d32 =
++		DWC_READ_REG32(&pcd->core_if->dev_if->
++						out_ep_regs[ep->num]->doeptsiz);
++	/* Payload will be */
++	payload = deptsiz_init.b.xfersize - deptsiz_updt.b.xfersize;
++	/* Packet count is decremented every time a packet
++	 * is written to the RxFIFO not in to the external memory
++	 * So, if payload == 0, then it means no packet was sent to ext memory*/
++	pack_num = (!payload) ? 0 : (deptsiz_init.b.pktcnt - deptsiz_updt.b.pktcnt);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Payload for EP%d-%s\n",
++		ep->num, (ep->is_in ? "IN" : "OUT"));
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered bytes = 0x%08x\n", payload);
++	DWC_DEBUGPL(DBG_PCDV,
++		"Number of transfered packets = %d\n", pack_num);
++#endif
++}
++
++
++#ifdef DWC_UTE_CFI
++static inline void print_desc(struct dwc_otg_dma_desc *ddesc,
++			      const uint8_t * epname, int descnum)
++{
++	CFI_INFO
++	    ("%s DMA_DESC(%d) buf=0x%08x bytes=0x%04x; sp=0x%x; l=0x%x; sts=0x%02x; bs=0x%02x\n",
++	     epname, descnum, ddesc->buf, ddesc->status.b.bytes,
++	     ddesc->status.b.sp, ddesc->status.b.l, ddesc->status.b.sts,
++	     ddesc->status.b.bs);
++}
++#endif
++
++/**
++ * This function returns pointer to in ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_in_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_in_eps; ++i) {
++			if (pcd->in_ep[i].dwc_ep.num == ep_num)
++				return &pcd->in_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This function returns pointer to out ep struct with number ep_num
++ */
++static inline dwc_otg_pcd_ep_t *get_out_ep(dwc_otg_pcd_t * pcd, uint32_t ep_num)
++{
++	int i;
++	int num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++	if (ep_num == 0) {
++		return &pcd->ep0;
++	} else {
++		for (i = 0; i < num_out_eps; ++i) {
++			if (pcd->out_ep[i].dwc_ep.num == ep_num)
++				return &pcd->out_ep[i];
++		}
++		return 0;
++	}
++}
++
++/**
++ * This functions gets a pointer to an EP from the wIndex address
++ * value of the control request.
++ */
++dwc_otg_pcd_ep_t *get_ep_by_addr(dwc_otg_pcd_t * pcd, u16 wIndex)
++{
++	dwc_otg_pcd_ep_t *ep;
++	uint32_t ep_num = UE_GET_ADDR(wIndex);
++
++	if (ep_num == 0) {
++		ep = &pcd->ep0;
++	} else if (UE_GET_DIR(wIndex) == UE_DIR_IN) {	/* in ep */
++		ep = &pcd->in_ep[ep_num - 1];
++	} else {
++		ep = &pcd->out_ep[ep_num - 1];
++	}
++
++	return ep;
++}
++
++/**
++ * This function checks the EP request queue, if the queue is not
++ * empty the next request is started.
++ */
++void start_next_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_pcd_request_t *req = 0;
++	uint32_t max_transfer =
++	    GET_CORE_IF(ep->pcd)->core_params->max_transfer_size;
++
++#ifdef DWC_UTE_CFI
++	struct dwc_otg_pcd *pcd;
++	pcd = ep->pcd;
++#endif
++
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			ep->dwc_ep.cfi_req_len = req->length;
++			pcd->cfi->ops.build_descriptors(pcd->cfi, pcd, ep, req);
++		} else {
++#endif
++			/* Setup and start the Transfer */
++			if (req->dw_align_buf) {
++				ep->dwc_ep.dma_addr = req->dw_align_buf_dma;
++				ep->dwc_ep.start_xfer_buff = req->dw_align_buf;
++				ep->dwc_ep.xfer_buff = req->dw_align_buf;
++			} else {
++				ep->dwc_ep.dma_addr = req->dma;
++				ep->dwc_ep.start_xfer_buff = req->buf;
++				ep->dwc_ep.xfer_buff = req->buf;
++			}
++			ep->dwc_ep.sent_zlp = 0;
++			ep->dwc_ep.total_len = req->length;
++			ep->dwc_ep.xfer_len = 0;
++			ep->dwc_ep.xfer_count = 0;
++
++			ep->dwc_ep.maxxfer = max_transfer;
++			if (GET_CORE_IF(ep->pcd)->dma_desc_enable) {
++				uint32_t out_max_xfer = DDMA_MAX_TRANSFER_SIZE
++				    - (DDMA_MAX_TRANSFER_SIZE % 4);
++				if (ep->dwc_ep.is_in) {
++					if (ep->dwc_ep.maxxfer >
++					    DDMA_MAX_TRANSFER_SIZE) {
++						ep->dwc_ep.maxxfer =
++						    DDMA_MAX_TRANSFER_SIZE;
++					}
++				} else {
++					if (ep->dwc_ep.maxxfer > out_max_xfer) {
++						ep->dwc_ep.maxxfer =
++						    out_max_xfer;
++					}
++				}
++			}
++			if (ep->dwc_ep.maxxfer < ep->dwc_ep.total_len) {
++				ep->dwc_ep.maxxfer -=
++				    (ep->dwc_ep.maxxfer % ep->dwc_ep.maxpacket);
++			}
++			if (req->sent_zlp) {
++				if ((ep->dwc_ep.total_len %
++				     ep->dwc_ep.maxpacket == 0)
++				    && (ep->dwc_ep.total_len != 0)) {
++					ep->dwc_ep.sent_zlp = 1;
++				}
++
++			}
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		dwc_otg_ep_start_transfer(GET_CORE_IF(ep->pcd), &ep->dwc_ep);
++	} else if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		DWC_PRINTF("There are no more ISOC requests \n");
++		ep->dwc_ep.frame_num = 0xFFFFFFFF;
++	}
++}
++
++/**
++ * This function handles the SOF Interrupts. At this time the SOF
++ * Interrupt is disabled.
++ */
++int32_t dwc_otg_pcd_handle_sof_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++	gintsts_data_t gintsts;
++
++	DWC_DEBUGPL(DBG_PCD, "SOF\n");
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.sofintr = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Rx Status Queue Level Interrupt, which
++ * indicates that there is a least one packet in the Rx FIFO.  The
++ * packets are moved from the FIFO to memory, where they will be
++ * processed when the Endpoint Interrupt Register indicates Transfer
++ * Complete or SETUP Phase Done.
++ *
++ * Repeat the following until the Rx Status Queue is empty:
++ *	 -# Read the Receive Status Pop Register (GRXSTSP) to get Packet
++ *		info
++ *	 -# If Receive FIFO is empty then skip to step Clear the interrupt
++ *		and exit
++ *	 -# If SETUP Packet call dwc_otg_read_setup_packet to copy the
++ *		SETUP data to the buffer
++ *	 -# If OUT Data Packet call dwc_otg_read_packet to copy the data
++ *		to the destination buffer
++ */
++int32_t dwc_otg_pcd_handle_rx_status_q_level_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	gintmsk_data_t gintmask = {.d32 = 0 };
++	device_grxsts_data_t status;
++	dwc_otg_pcd_ep_t *ep;
++	gintsts_data_t gintsts;
++#ifdef DEBUG
++	static char *dpid_str[] = { "D0", "D2", "D1", "MDATA" };
++#endif
++
++	//DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, _pcd);
++	/* Disable the Rx Status Queue Level interrupt */
++	gintmask.b.rxstsqlvl = 1;
++	DWC_MODIFY_REG32(&global_regs->gintmsk, gintmask.d32, 0);
++
++	/* Get the Status from the top of the FIFO */
++	status.d32 = DWC_READ_REG32(&global_regs->grxstsp);
++
++	DWC_DEBUGPL(DBG_PCD, "EP:%d BCnt:%d DPID:%s "
++		    "pktsts:%x Frame:%d(0x%0x)\n",
++		    status.b.epnum, status.b.bcnt,
++		    dpid_str[status.b.dpid],
++		    status.b.pktsts, status.b.fn, status.b.fn);
++	/* Get pointer to EP structure */
++	ep = get_out_ep(pcd, status.b.epnum);
++
++	switch (status.b.pktsts) {
++	case DWC_DSTS_GOUT_NAK:
++		DWC_DEBUGPL(DBG_PCDV, "Global OUT NAK\n");
++		break;
++	case DWC_STS_DATA_UPDT:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Data Packet\n");
++		if (status.b.bcnt && ep->dwc_ep.xfer_buff) {
++			/** @todo NGS Check for buffer overflow? */
++			dwc_otg_read_packet(core_if,
++					    ep->dwc_ep.xfer_buff,
++					    status.b.bcnt);
++			ep->dwc_ep.xfer_count += status.b.bcnt;
++			ep->dwc_ep.xfer_buff += status.b.bcnt;
++		}
++		break;
++	case DWC_STS_XFER_COMP:
++		DWC_DEBUGPL(DBG_PCDV, "OUT Complete\n");
++		break;
++	case DWC_DSTS_SETUP_COMP:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "Setup Complete\n");
++#endif
++		break;
++	case DWC_DSTS_SETUP_UPDT:
++		dwc_otg_read_setup_packet(core_if, pcd->setup_pkt->d32);
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD,
++			    "SETUP PKT: %02x.%02x v%04x i%04x l%04x\n",
++			    pcd->setup_pkt->req.bmRequestType,
++			    pcd->setup_pkt->req.bRequest,
++			    UGETW(pcd->setup_pkt->req.wValue),
++			    UGETW(pcd->setup_pkt->req.wIndex),
++			    UGETW(pcd->setup_pkt->req.wLength));
++#endif
++		ep->dwc_ep.xfer_count += status.b.bcnt;
++		break;
++	default:
++		DWC_DEBUGPL(DBG_PCDV, "Invalid Packet Status (0x%0x)\n",
++			    status.b.pktsts);
++		break;
++	}
++
++	/* Enable the Rx Status Queue Level interrupt */
++	DWC_MODIFY_REG32(&global_regs->gintmsk, 0, gintmask.d32);
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.rxstsqlvl = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	//DWC_DEBUGPL(DBG_PCDV, "EXIT: %s\n", __func__);
++	return 1;
++}
++
++/**
++ * This function examines the Device IN Token Learning Queue to
++ * determine the EP number of the last IN token received.  This
++ * implementation is for the Mass Storage device where there are only
++ * 2 IN EPs (Control-IN and BULK-IN).
++ *
++ * The EP numbers for the first six IN Tokens are in DTKNQR1 and there
++ * are 8 EP Numbers in each of the other possible DTKNQ Registers.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ *
++ */
++static inline int get_ep_of_last_in_token(dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	int ndx = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++	int epnum = 0;
++
++	//DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	/* Get the EP numbers */
++	in_tkn_epnums[0] = dtknqr1.b.epnums0_5;
++	ndx = dtknqr1.b.intknwptr - 1;
++
++	//DWC_DEBUGPL(DBG_PCDV,"ndx=%d\n",ndx);
++	if (ndx == -1) {
++		/** @todo Find a simpler way to calculate the max
++		 * queue position.*/
++		int cnt = TOKEN_Q_DEPTH;
++		if (TOKEN_Q_DEPTH <= 6) {
++			cnt = TOKEN_Q_DEPTH - 1;
++		} else if (TOKEN_Q_DEPTH <= 14) {
++			cnt = TOKEN_Q_DEPTH - 7;
++		} else if (TOKEN_Q_DEPTH <= 22) {
++			cnt = TOKEN_Q_DEPTH - 15;
++		} else {
++			cnt = TOKEN_Q_DEPTH - 23;
++		}
++		epnum = (in_tkn_epnums[DTKNQ_REG_CNT - 1] >> (cnt * 4)) & 0xF;
++	} else {
++		if (ndx <= 5) {
++			epnum = (in_tkn_epnums[0] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 13) {
++			ndx -= 6;
++			epnum = (in_tkn_epnums[1] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 21) {
++			ndx -= 14;
++			epnum = (in_tkn_epnums[2] >> (ndx * 4)) & 0xF;
++		} else if (ndx <= 29) {
++			ndx -= 22;
++			epnum = (in_tkn_epnums[3] >> (ndx * 4)) & 0xF;
++		}
++	}
++	//DWC_DEBUGPL(DBG_PCD,"epnum=%d\n",epnum);
++	return epnum;
++}
++
++/**
++ * This interrupt occurs when the non-periodic Tx FIFO is half-empty.
++ * The active request is checked for the next packet to be loaded into
++ * the non-periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_np_tx_fifo_empty_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	gnptxsts_data_t txstatus = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	int epnum = 0;
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	/* Get the epnum from the IN Token Learning Queue. */
++	epnum = get_ep_of_last_in_token(core_if);
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "NP TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 GNPTXSTS=0x%08x\n", txstatus.d32);
++
++	while (txstatus.b.nptxqspcavail > 0 &&
++	       txstatus.b.nptxfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 = DWC_READ_REG32(&global_regs->gnptxsts);
++		DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n", txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "GNPTXSTS=0x%08x\n",
++		    DWC_READ_REG32(&global_regs->gnptxsts));
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.nptxfempty = 1;
++	DWC_WRITE_REG32(&global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function is called when dedicated Tx FIFO Empty interrupt occurs.
++ * The active request is checked for the next packet to be loaded into
++ * apropriate Tx FIFO.
++ */
++static int32_t write_empty_tx_fifo(dwc_otg_pcd_t * pcd, uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *ep_regs;
++	dtxfsts_data_t txstatus = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep = 0;
++	uint32_t len = 0;
++	int dwords;
++
++	ep = get_in_ep(pcd, epnum);
++
++	DWC_DEBUGPL(DBG_PCD, "Dedicated TxFifo Empty: %d \n", epnum);
++
++	ep_regs = core_if->dev_if->in_ep_regs[epnum];
++
++	len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++
++	if (len > ep->dwc_ep.maxpacket) {
++		len = ep->dwc_ep.maxpacket;
++	}
++
++	dwords = (len + 3) / 4;
++
++	/* While there is space in the queue and space in the FIFO and
++	 * More data to tranfer, Write packets to the Tx FIFO */
++	txstatus.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum, txstatus.d32);
++
++	while (txstatus.b.txfspcavail > dwords &&
++	       ep->dwc_ep.xfer_count < ep->dwc_ep.xfer_len &&
++	       ep->dwc_ep.xfer_len != 0) {
++		/* Write the FIFO */
++		dwc_otg_ep_write_packet(core_if, &ep->dwc_ep, 0);
++
++		len = ep->dwc_ep.xfer_len - ep->dwc_ep.xfer_count;
++		if (len > ep->dwc_ep.maxpacket) {
++			len = ep->dwc_ep.maxpacket;
++		}
++
++		dwords = (len + 3) / 4;
++		txstatus.d32 =
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts);
++		DWC_DEBUGPL(DBG_PCDV, "dtxfsts[%d]=0x%08x\n", epnum,
++			    txstatus.d32);
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "b4 dtxfsts[%d]=0x%08x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dtxfsts));
++
++	return 1;
++}
++
++/**
++ * This function is called when the Device is disconnected. It stops
++ * any active requests and informs the Gadget driver of the
++ * disconnect.
++ */
++void dwc_otg_pcd_stop(dwc_otg_pcd_t * pcd)
++{
++	int i, num_in_eps, num_out_eps;
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_SPINLOCK(pcd->lock);
++
++	num_in_eps = GET_CORE_IF(pcd)->dev_if->num_in_eps;
++	num_out_eps = GET_CORE_IF(pcd)->dev_if->num_out_eps;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() \n", __func__);
++	/* don't disconnect drivers more than once */
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		DWC_DEBUGPL(DBG_ANY, "%s() Already Disconnected\n", __func__);
++		DWC_SPINUNLOCK(pcd->lock);
++		return;
++	}
++	pcd->ep0state = EP0_DISCONNECT;
++
++	/* Reset the OTG state. */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Disable the NP Tx Fifo Empty Interrupt. */
++	intr_mask.b.nptxfempty = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Flush the FIFOs */
++	/**@todo NGS Flush Periodic FIFOs */
++	dwc_otg_flush_tx_fifo(GET_CORE_IF(pcd), 0x10);
++	dwc_otg_flush_rx_fifo(GET_CORE_IF(pcd));
++
++	/* prevent new request submissions, kill any outstanding requests  */
++	ep = &pcd->ep0;
++	dwc_otg_request_nuke(ep);
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_in_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->in_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++	/* prevent new request submissions, kill any outstanding requests  */
++	for (i = 0; i < num_out_eps; i++) {
++		dwc_otg_pcd_ep_t *ep = &pcd->out_ep[i];
++		dwc_otg_request_nuke(ep);
++	}
++
++	/* report disconnect; the driver is already quiesced */
++	if (pcd->fops->disconnect) {
++		DWC_SPINUNLOCK(pcd->lock);
++		pcd->fops->disconnect(pcd);
++		DWC_SPINLOCK(pcd->lock);
++	}
++	DWC_SPINUNLOCK(pcd->lock);
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_i2c_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "i2cintr");
++	intr_mask.b.i2cintr = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.i2cintr = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that ...
++ */
++int32_t dwc_otg_pcd_handle_early_suspend_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++#if defined(VERBOSE)
++	DWC_PRINTF("Early Suspend Detected\n");
++#endif
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.erlysuspend = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This function configures EPO to receive SETUP packets.
++ *
++ * @todo NGS: Update the comments from the HW FS.
++ *
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param pcd	  Programming view of the PCD.
++ */
++static inline void ep0_out_start(dwc_otg_core_if_t * core_if,
++				 dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	depctl_data_t doepctl = {.d32 = 0 };
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "%s() doepctl0=%0x\n", __func__,
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++#endif
++	if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl);
++		if (doepctl.b.epena) {
++			return;
++		}
++	}
++
++	doeptsize0.b.supcnt = 3;
++	doeptsize0.b.pktcnt = 1;
++	doeptsize0.b.xfersize = 8 * 3;
++
++	if (core_if->dma_enable) {
++		if (!core_if->dma_desc_enable) {
++			/** put here as for Hermes mode deptisz register should not be written */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++					doeptsize0.d32);
++
++			/** @todo dma needs to handle multiple setup packets (up to 3) */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					pcd->setup_pkt_dma_handle);
++		} else {
++			dev_if->setup_desc_index =
++			    (dev_if->setup_desc_index + 1) & 1;
++			dma_desc =
++			    dev_if->setup_desc_addr[dev_if->setup_desc_index];
++
++			/** DMA Descriptor Setup */
++			dma_desc->status.b.bs = BS_HOST_BUSY;
++			if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++				dma_desc->status.b.sr = 0;
++				dma_desc->status.b.mtrf = 0;
++			}
++			dma_desc->status.b.l = 1;
++			dma_desc->status.b.ioc = 1;
++			dma_desc->status.b.bytes = pcd->ep0.dwc_ep.maxpacket;
++			dma_desc->buf = pcd->setup_pkt_dma_handle;
++			dma_desc->status.b.sts = 0;
++			dma_desc->status.b.bs = BS_HOST_READY;
++
++			/** DOEPDMA0 Register write */
++			DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepdma,
++					dev_if->dma_setup_desc_addr
++					[dev_if->setup_desc_index]);
++		}
++
++	} else {
++		/** put here as for Hermes mode deptisz register should not be written */
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doeptsiz,
++				doeptsize0.d32);
++	}
++
++	/** DOEPCTL0 Register write cnak will be set after setup interrupt */
++	doepctl.d32 = 0;
++	doepctl.b.epena = 1;
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a) {
++	doepctl.b.cnak = 1;
++	DWC_WRITE_REG32(&dev_if->out_ep_regs[0]->doepctl, doepctl.d32);
++	} else {
++		DWC_MODIFY_REG32(&dev_if->out_ep_regs[0]->doepctl, 0, doepctl.d32);
++	}
++
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_PCDV, "doepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->out_ep_regs[0]->doepctl));
++	DWC_DEBUGPL(DBG_PCDV, "diepctl0=%0x\n",
++		    DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl));
++#endif
++}
++
++/**
++ * This interrupt occurs when a USB Reset is detected. When the USB
++ * Reset Interrupt occurs the device state is set to DEFAULT and the
++ * EP0 state is set to IDLE.
++ *	-#	Set the NAK bit for all OUT endpoints (DOEPCTLn.SNAK = 1)
++ *	-#	Unmask the following interrupt bits
++ *		- DAINTMSK.INEP0 = 1 (Control 0 IN endpoint)
++ *	- DAINTMSK.OUTEP0 = 1 (Control 0 OUT endpoint)
++ *	- DOEPMSK.SETUP = 1
++ *	- DOEPMSK.XferCompl = 1
++ *	- DIEPMSK.XferCompl = 1
++ *	- DIEPMSK.TimeOut = 1
++ *	-# Program the following fields in the endpoint specific registers
++ *	for Control OUT EP 0, in order to receive a setup packet
++ *	- DOEPTSIZ0.Packet Count = 3 (To receive up to 3 back to back
++ *	  setup packets)
++ *	- DOEPTSIZE0.Transfer Size = 24 Bytes (To receive up to 3 back
++ *	  to back setup packets)
++ *		- In DMA mode, DOEPDMA0 Register with a memory address to
++ *		  store any setup packets received
++ * At this point, all the required initialization, except for enabling
++ * the control 0 OUT endpoint is done, for receiving SETUP packets.
++ */
++int32_t dwc_otg_pcd_handle_usb_reset_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	depctl_data_t doepctl = {.d32 = 0 };
++	depctl_data_t diepctl = {.d32 = 0 };
++	daint_data_t daintmsk = {.d32 = 0 };
++	doepmsk_data_t doepmsk = {.d32 = 0 };
++	diepmsk_data_t diepmsk = {.d32 = 0 };
++	dcfg_data_t dcfg = {.d32 = 0 };
++	grstctl_t resetctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	int i = 0;
++	gintsts_data_t gintsts;
++	pcgcctl_data_t power = {.d32 = 0 };
++
++	power.d32 = DWC_READ_REG32(core_if->pcgcctl);
++	if (power.b.stoppclk) {
++		power.d32 = 0;
++		power.b.stoppclk = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.pwrclmp = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++
++		power.b.rstpdwnmodule = 1;
++		DWC_MODIFY_REG32(core_if->pcgcctl, power.d32, 0);
++	}
++
++	core_if->lx_state = DWC_OTG_L0;
++
++	DWC_PRINTF("USB RESET\n");
++#ifdef DWC_EN_ISOC
++	for (i = 1; i < 16; ++i) {
++		dwc_otg_pcd_ep_t *ep;
++		dwc_ep_t *dwc_ep;
++		ep = get_in_ep(pcd, i);
++		if (ep != 0) {
++			dwc_ep = &ep->dwc_ep;
++			dwc_ep->next_frame = 0xffffffff;
++		}
++	}
++#endif /* DWC_EN_ISOC */
++
++	/* reset the HNP settings */
++	dwc_otg_pcd_update_otg(pcd, 1);
++
++	/* Clear the Remote Wakeup Signalling */
++	dctl.b.rmtwkupsig = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, 0);
++
++	/* Set NAK for all OUT EPs */
++	doepctl.b.snak = 1;
++	for (i = 0; i <= dev_if->num_out_eps; i++) {
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++	}
++
++	/* Flush the NP Tx FIFO */
++	dwc_otg_flush_tx_fifo(core_if, 0x10);
++	/* Flush the Learning Queue */
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++	if (!core_if->core_params->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 0;
++		for (i = 0; i<= core_if->dev_if->num_in_eps; ++i) {
++			core_if->nextep_seq[i] = 0xff;	// 0xff - EP not active
++		}
++		core_if->nextep_seq[0] = 0;
++		core_if->first_in_nextep_seq = 0;
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[0]->diepctl);
++		diepctl.b.nextep = 0;
++		DWC_WRITE_REG32(&dev_if->in_ep_regs[0]->diepctl, diepctl.d32);
++
++		/* Update IN Endpoint Mismatch Count by active IN NP EP count + 1 */
++		dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++		dcfg.b.epmscnt = 2;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++			__func__, core_if->first_in_nextep_seq);
++		for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++			DWC_DEBUGPL(DBG_PCDV, "%2d\n", core_if->nextep_seq[i]);
++		}
++	}
++
++	if (core_if->multiproc_int_enable) {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->deachintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++/*
++		doepmsk.b.babble = 1;
++		doepmsk.b.nyet = 1;
++
++		if (core_if->dma_enable) {
++			doepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepeachintmsk[0],
++				doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		diepmsk.b.intknepmis = 1;
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0;
++
++/*		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++/*
++		if (core_if->dma_enable) {
++			diepmsk.b.nak = 1;
++		}
++*/
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepeachintmsk[0],
++				diepmsk.d32);
++	} else {
++		daintmsk.b.inep0 = 1;
++		daintmsk.b.outep0 = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->daintmsk,
++				daintmsk.d32);
++
++		doepmsk.b.setup = 1;
++		doepmsk.b.xfercompl = 1;
++		doepmsk.b.ahberr = 1;
++		doepmsk.b.epdisabled = 1;
++
++		if ((core_if->dma_desc_enable) ||
++		    (core_if->dma_enable
++		     && core_if->snpsid >= OTG_CORE_REV_3_00a)) {
++			doepmsk.b.stsphsercvd = 1;
++		}
++		if (core_if->dma_desc_enable)
++			doepmsk.b.bna = 1;
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->doepmsk, doepmsk.d32);
++
++		diepmsk.b.xfercompl = 1;
++		diepmsk.b.timeout = 1;
++		diepmsk.b.epdisabled = 1;
++		diepmsk.b.ahberr = 1;
++		if (!core_if->en_multiple_tx_fifo && core_if->dma_enable)
++			diepmsk.b.intknepmis = 0;
++/*
++		if (core_if->dma_desc_enable) {
++			diepmsk.b.bna = 1;
++		}
++*/
++
++		DWC_WRITE_REG32(&dev_if->dev_global_regs->diepmsk, diepmsk.d32);
++	}
++
++	/* Reset Device Address */
++	dcfg.d32 = DWC_READ_REG32(&dev_if->dev_global_regs->dcfg);
++	dcfg.b.devaddr = 0;
++	DWC_WRITE_REG32(&dev_if->dev_global_regs->dcfg, dcfg.d32);
++
++	/* setup EP0 to receive SETUP packets */
++	if (core_if->snpsid <= OTG_CORE_REV_2_94a)
++		ep0_out_start(core_if, pcd);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.usbreset = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Get the device speed from the device status register and convert it
++ * to USB speed constant.
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ */
++static int get_device_speed(dwc_otg_core_if_t * core_if)
++{
++	dsts_data_t dsts;
++	int speed = 0;
++	dsts.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dsts);
++
++	switch (dsts.b.enumspd) {
++	case DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ:
++		speed = USB_SPEED_HIGH;
++		break;
++	case DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ:
++	case DWC_DSTS_ENUMSPD_FS_PHY_48MHZ:
++		speed = USB_SPEED_FULL;
++		break;
++
++	case DWC_DSTS_ENUMSPD_LS_PHY_6MHZ:
++		speed = USB_SPEED_LOW;
++		break;
++	}
++
++	return speed;
++}
++
++/**
++ * Read the device status register and set the device speed in the
++ * data structure.
++ * Set up EP0 to receive SETUP packets by calling dwc_ep0_activate.
++ */
++int32_t dwc_otg_pcd_handle_enum_done_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	gintsts_data_t gintsts;
++	gusbcfg_data_t gusbcfg;
++	dwc_otg_core_global_regs_t *global_regs =
++	    GET_CORE_IF(pcd)->core_global_regs;
++	uint8_t utmi16b, utmi8b;
++	int speed;
++	DWC_DEBUGPL(DBG_PCD, "SPEED ENUM\n");
++
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_2_60a) {
++		utmi16b = 6;	//vahrama old value was 6;
++		utmi8b = 9;
++	} else {
++		utmi16b = 4;
++		utmi8b = 8;
++	}
++	dwc_otg_ep0_activate(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	if (GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++
++	if (pcd->ep0state == EP0_DISCONNECT) {
++		pcd->ep0state = EP0_IDLE;
++	} else if (pcd->ep0state == EP0_STALL) {
++		pcd->ep0state = EP0_IDLE;
++	}
++
++	pcd->ep0state = EP0_IDLE;
++
++	ep0->stopped = 0;
++
++	speed = get_device_speed(GET_CORE_IF(pcd));
++	pcd->fops->connect(pcd, speed);
++
++	/* Set USB turnaround time based on device speed and PHY interface. */
++	gusbcfg.d32 = DWC_READ_REG32(&global_regs->gusbcfg);
++	if (speed == USB_SPEED_HIGH) {
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_ULPI) {
++			/* ULPI interface */
++			gusbcfg.b.usbtrdtim = 9;
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI) {
++			/* UTMI+ interface */
++			if (GET_CORE_IF(pcd)->hwcfg4.b.utmi_phy_data_width == 0) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else if (GET_CORE_IF(pcd)->hwcfg4.
++				   b.utmi_phy_data_width == 1) {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			} else if (GET_CORE_IF(pcd)->
++				   core_params->phy_utmi_width == 8) {
++				gusbcfg.b.usbtrdtim = utmi8b;
++			} else {
++				gusbcfg.b.usbtrdtim = utmi16b;
++			}
++		}
++		if (GET_CORE_IF(pcd)->hwcfg2.b.hs_phy_type ==
++		    DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI) {
++			/* UTMI+  OR  ULPI interface */
++			if (gusbcfg.b.ulpi_utmi_sel == 1) {
++				/* ULPI interface */
++				gusbcfg.b.usbtrdtim = 9;
++			} else {
++				/* UTMI+ interface */
++				if (GET_CORE_IF(pcd)->
++				    core_params->phy_utmi_width == 16) {
++					gusbcfg.b.usbtrdtim = utmi16b;
++				} else {
++					gusbcfg.b.usbtrdtim = utmi8b;
++				}
++			}
++		}
++	} else {
++		/* Full or low speed */
++		gusbcfg.b.usbtrdtim = 9;
++	}
++	DWC_WRITE_REG32(&global_regs->gusbcfg, gusbcfg.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.enumdone = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++	return 1;
++}
++
++/**
++ * This interrupt indicates that the ISO OUT Packet was dropped due to
++ * Rx FIFO full or Rx Status Queue Full.  If this interrupt occurs
++ * read all the data from the Rx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_isoc_out_packet_dropped_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++
++	DWC_WARN("INTERRUPT Handler not implemented for %s\n",
++		 "ISOC Out Dropped");
++
++	intr_mask.b.isooutdrop = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.isooutdrop = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates the end of the portion of the micro-frame
++ * for periodic transactions.  If there is a periodic transaction for
++ * the next frame, load the packets into the EP periodic Tx FIFO.
++ */
++int32_t dwc_otg_pcd_handle_end_periodic_frame_intr(dwc_otg_pcd_t * pcd)
++{
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "EOP");
++
++	intr_mask.b.eopframe = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.eopframe = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that EP of the packet on the top of the
++ * non-periodic Tx FIFO does not match EP of the IN Token received.
++ *
++ * The "Device IN Token Queue" Registers are read to determine the
++ * order the IN Tokens have been received. The non-periodic Tx FIFO
++ * is flushed, so it can be reloaded in the order seen in the IN Token
++ * Queue.
++ */
++int32_t dwc_otg_pcd_handle_ep_mismatch_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dctl_data_t dctl;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	if (!core_if->en_multiple_tx_fifo && core_if->dma_enable) {
++		core_if->start_predict = 1;
++
++		DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++		gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++		if (!gintsts.b.ginnakeff) {
++			/* Disable EP Mismatch interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.epmismatch = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32, 0);
++			/* Enable the Global IN NAK Effective Interrupt */
++			intr_mask.d32 = 0;
++			intr_mask.b.ginnakeff = 1;
++			DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++			/* Set the global non-periodic IN NAK handshake */
++			dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++			dctl.b.sgnpinnak = 1;
++			DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++		} else {
++			DWC_PRINTF("gintsts.b.ginnakeff = 1! dctl.b.sgnpinnak not set\n");
++		}
++		/* Disabling of all EP's will be done in dwc_otg_pcd_handle_in_nak_effective()
++		 * handler after Global IN NAK Effective interrupt will be asserted */
++	}
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.epmismatch = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This interrupt is valid only in DMA mode. This interrupt indicates that the
++ * core has stopped fetching data for IN endpoints due to the unavailability of
++ * TxFIFO space or Request Queue space. This interrupt is used by the
++ * application for an endpoint mismatch algorithm.
++ *
++ * @param pcd The PCD
++ */
++int32_t dwc_otg_pcd_handle_ep_fetsusp_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++	gintmsk_data_t gintmsk_data;
++	dctl_data_t dctl;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, core_if);
++
++	/* Clear the global non-periodic IN NAK handshake */
++	dctl.d32 = 0;
++	dctl.b.cgnpinnak = 1;
++	DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++	/* Mask GINTSTS.FETSUSP interrupt */
++	gintmsk_data.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++	gintmsk_data.b.fetsusp = 0;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, gintmsk_data.d32);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.fetsusp = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->gintsts, gintsts.d32);
++
++	return 1;
++}
++/**
++ * This funcion stalls EP0.
++ */
++static inline void ep0_do_stall(dwc_otg_pcd_t * pcd, const int err_val)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	usb_device_request_t *ctrl = &pcd->setup_pkt->req;
++	DWC_WARN("req %02x.%02x protocol STALL; err %d\n",
++		 ctrl->bmRequestType, ctrl->bRequest, err_val);
++
++	ep0->dwc_ep.is_in = 1;
++	dwc_otg_ep_set_stall(GET_CORE_IF(pcd), &ep0->dwc_ep);
++	pcd->ep0.stopped = 1;
++	pcd->ep0state = EP0_IDLE;
++	ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This functions delegates the setup command to the gadget driver.
++ */
++static inline void do_gadget_setup(dwc_otg_pcd_t * pcd,
++				   usb_device_request_t * ctrl)
++{
++	int ret = 0;
++	DWC_SPINUNLOCK(pcd->lock);
++	ret = pcd->fops->setup(pcd, (uint8_t *) ctrl);
++	DWC_SPINLOCK(pcd->lock);
++	if (ret < 0) {
++		ep0_do_stall(pcd, ret);
++	}
++
++	/** @todo This is a g_file_storage gadget driver specific
++	 * workaround: a DELAYED_STATUS result from the fsg_setup
++	 * routine will result in the gadget queueing a EP0 IN status
++	 * phase for a two-stage control transfer. Exactly the same as
++	 * a SET_CONFIGURATION/SET_INTERFACE except that this is a class
++	 * specific request.  Need a generic way to know when the gadget
++	 * driver will queue the status phase. Can we assume when we
++	 * call the gadget driver setup() function that it will always
++	 * queue and require the following flag? Need to look into
++	 * this.
++	 */
++
++	if (ret == 256 + 999) {
++		pcd->request_config = 1;
++	}
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This functions delegates the CFI setup commands to the gadget driver.
++ * This function will return a negative value to indicate a failure.
++ */
++static inline int cfi_gadget_setup(dwc_otg_pcd_t * pcd,
++				   struct cfi_usb_ctrlrequest *ctrl_req)
++{
++	int ret = 0;
++
++	if (pcd->fops && pcd->fops->cfi_setup) {
++		DWC_SPINUNLOCK(pcd->lock);
++		ret = pcd->fops->cfi_setup(pcd, ctrl_req);
++		DWC_SPINLOCK(pcd->lock);
++		if (ret < 0) {
++			ep0_do_stall(pcd, ret);
++			return ret;
++		}
++	}
++
++	return ret;
++}
++#endif
++
++/**
++ * This function starts the Zero-Length Packet for the IN status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_in_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		return;
++	}
++
++	pcd->ep0state = EP0_IN_STATUS_PHASE;
++
++	/* Prepare for more SETUP Packets */
++	DWC_DEBUGPL(DBG_PCD, "EP0 IN ZLP\n");
++	if ((GET_CORE_IF(pcd)->snpsid >= OTG_CORE_REV_3_00a)
++	    && (pcd->core_if->dma_desc_enable)
++	    && (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len)) {
++		DWC_DEBUGPL(DBG_PCDV,
++			    "Data terminated wait next packet in out_desc_addr\n");
++		pcd->backup_buf = phys_to_virt(ep0->dwc_ep.dma_addr);
++		pcd->data_terminated = 1;
++	}
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 1;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	//ep0_out_start(GET_CORE_IF(pcd), pcd);
++}
++
++/**
++ * This function starts the Zero-Length Packet for the OUT status phase
++ * of a 2 stage control transfer.
++ */
++static inline void do_setup_out_status_phase(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	if (pcd->ep0state == EP0_STALL) {
++		DWC_DEBUGPL(DBG_PCD, "EP0 STALLED\n");
++		return;
++	}
++	pcd->ep0state = EP0_OUT_STATUS_PHASE;
++
++	DWC_DEBUGPL(DBG_PCD, "EP0 OUT ZLP\n");
++	ep0->dwc_ep.xfer_len = 0;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.is_in = 0;
++	ep0->dwc_ep.dma_addr = pcd->setup_pkt_dma_handle;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++
++	/* Prepare for more SETUP Packets */
++	if (GET_CORE_IF(pcd)->dma_enable == 0) {
++		ep0_out_start(GET_CORE_IF(pcd), pcd);
++	}
++}
++
++/**
++ * Clear the EP halt (STALL) and if pending requests start the
++ * transfer.
++ */
++static inline void pcd_clear_halt(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	if (ep->dwc_ep.stall_clear_flag == 0)
++		dwc_otg_ep_clear_stall(GET_CORE_IF(pcd), &ep->dwc_ep);
++
++	/* Reactive the EP */
++	dwc_otg_ep_activate(GET_CORE_IF(pcd), &ep->dwc_ep);
++	if (ep->stopped) {
++		ep->stopped = 0;
++		/* If there is a request in the EP queue start it */
++
++		/** @todo FIXME: this causes an EP mismatch in DMA mode.
++		 * epmismatch not yet implemented. */
++
++		/*
++		 * Above fixme is solved by implmenting a tasklet to call the
++		 * start_next_request(), outside of interrupt context at some
++		 * time after the current time, after a clear-halt setup packet.
++		 * Still need to implement ep mismatch in the future if a gadget
++		 * ever uses more than one endpoint at once
++		 */
++		ep->queue_sof = 1;
++		DWC_TASK_SCHEDULE(pcd->start_xfer_tasklet);
++	}
++	/* Start Control Status Phase */
++	do_setup_in_status_phase(pcd);
++}
++
++/**
++ * This function is called when the SET_FEATURE TEST_MODE Setup packet
++ * is sent from the host.  The Device Control register is written with
++ * the Test Mode bits set to the specified Test Mode.  This is done as
++ * a tasklet so that the "Status" phase of the control transfer
++ * completes before transmitting the TEST packets.
++ *
++ * @todo This has not been tested since the tasklet struct was put
++ * into the PCD struct!
++ *
++ */
++void do_test_mode(void *data)
++{
++	dctl_data_t dctl;
++	dwc_otg_pcd_t *pcd = (dwc_otg_pcd_t *) data;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int test_mode = pcd->test_mode;
++
++//        DWC_WARN("%s() has not been tested since being rewritten!\n", __func__);
++
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	switch (test_mode) {
++	case 1:		// TEST_J
++		dctl.b.tstctl = 1;
++		break;
++
++	case 2:		// TEST_K
++		dctl.b.tstctl = 2;
++		break;
++
++	case 3:		// TEST_SE0_NAK
++		dctl.b.tstctl = 3;
++		break;
++
++	case 4:		// TEST_PACKET
++		dctl.b.tstctl = 4;
++		break;
++
++	case 5:		// TEST_FORCE_ENABLE
++		dctl.b.tstctl = 5;
++		break;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++}
++
++/**
++ * This function process the GET_STATUS Setup Commands.
++ */
++static inline void do_get_status(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	uint16_t *status = pcd->status_buf;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD,
++		    "GET_STATUS %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		if(UGETW(ctrl.wIndex) == 0xF000) { /* OTG Status selector */
++			DWC_PRINTF("wIndex - %d\n", UGETW(ctrl.wIndex));
++			DWC_PRINTF("OTG VERSION - %d\n", core_if->otg_ver);
++			DWC_PRINTF("OTG CAP - %d, %d\n",
++				   core_if->core_params->otg_cap,
++						DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE);
++			if (core_if->otg_ver == 1
++			    && core_if->core_params->otg_cap ==
++			    DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				uint8_t *otgsts = (uint8_t*)pcd->status_buf;
++				*otgsts = (core_if->otg_sts & 0x1);
++				pcd->ep0_pending = 1;
++				ep0->dwc_ep.start_xfer_buff =
++				    (uint8_t *) otgsts;
++				ep0->dwc_ep.xfer_buff = (uint8_t *) otgsts;
++				ep0->dwc_ep.dma_addr =
++				    pcd->status_buf_dma_handle;
++				ep0->dwc_ep.xfer_len = 1;
++				ep0->dwc_ep.xfer_count = 0;
++				ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++				dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd),
++							   &ep0->dwc_ep);
++				return;
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++		} else {
++			*status = 0x1;	/* Self powered */
++			*status |= pcd->remote_wakeup_enable << 1;
++			break;
++		}
++	case UT_INTERFACE:
++		*status = 0;
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0 || UGETW(ctrl.wLength) > 2) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		/** @todo check for EP stall */
++		*status = ep->stopped;
++		break;
++	}
++	pcd->ep0_pending = 1;
++	ep0->dwc_ep.start_xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.xfer_buff = (uint8_t *) status;
++	ep0->dwc_ep.dma_addr = pcd->status_buf_dma_handle;
++	ep0->dwc_ep.xfer_len = 2;
++	ep0->dwc_ep.xfer_count = 0;
++	ep0->dwc_ep.total_len = ep0->dwc_ep.xfer_len;
++	dwc_otg_ep0_start_transfer(GET_CORE_IF(pcd), &ep0->dwc_ep);
++}
++
++/**
++ * This function process the SET_FEATURE Setup Commands.
++ */
++static inline void do_set_feature(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++	int32_t otg_cap_param = core_if->core_params->otg_cap;
++	gotgctl_data_t gotgctl = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCD, "SET_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++	DWC_DEBUGPL(DBG_PCD, "otg_cap=%d\n", otg_cap_param);
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 1;
++			break;
++
++		case UF_TEST_MODE:
++			/* Setup the Test Mode tasklet to do the Test
++			 * Packet generation after the SETUP Status
++			 * phase has completed. */
++
++			/** @todo This has not been tested since the
++			 * tasklet struct was put into the PCD
++			 * struct! */
++			pcd->test_mode = UGETW(ctrl.wIndex) >> 8;
++			DWC_TASK_SCHEDULE(pcd->test_mode_tasklet);
++			break;
++
++		case UF_DEVICE_B_HNP_ENABLE:
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_B_HNP_ENABLE\n");
++
++			/* dev may initiate HNP */
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->b_hnp_enable = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++				DWC_DEBUGPL(DBG_PCD, "Request B HNP\n");
++				/**@todo Is the gotgctl.devhnpen cleared
++				 * by a USB Reset? */
++				gotgctl.b.devhnpen = 1;
++				gotgctl.b.hnpreq = 1;
++				DWC_WRITE_REG32(&global_regs->gotgctl,
++						gotgctl.d32);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_HNP_SUPPORT:
++			/* RH port supports HNP */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		case UF_DEVICE_A_ALT_HNP_SUPPORT:
++			/* other RH port does */
++			DWC_DEBUGPL(DBG_PCDV,
++				    "SET_FEATURE: USB_DEVICE_A_ALT_HNP_SUPPORT\n");
++			if (otg_cap_param == DWC_OTG_CAP_PARAM_HNP_SRP_CAPABLE) {
++				pcd->a_alt_hnp_support = 1;
++				dwc_otg_pcd_update_otg(pcd, 0);
++			} else {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_INTERFACE:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UT_ENDPOINT:
++		if (UGETW(ctrl.wValue) == UF_ENDPOINT_HALT) {
++			ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++			if (ep == 0) {
++				ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++				return;
++			}
++			ep->stopped = 1;
++			dwc_otg_ep_set_stall(core_if, &ep->dwc_ep);
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++	}
++}
++
++/**
++ * This function process the CLEAR_FEATURE Setup Commands.
++ */
++static inline void do_clear_feature(dwc_otg_pcd_t * pcd)
++{
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep = 0;
++
++	DWC_DEBUGPL(DBG_PCD,
++		    "CLEAR_FEATURE:%02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++
++	switch (UT_GET_RECIPIENT(ctrl.bmRequestType)) {
++	case UT_DEVICE:
++		switch (UGETW(ctrl.wValue)) {
++		case UF_DEVICE_REMOTE_WAKEUP:
++			pcd->remote_wakeup_enable = 0;
++			break;
++
++		case UF_TEST_MODE:
++			/** @todo Add CLEAR_FEATURE for TEST modes. */
++			break;
++
++		default:
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++		do_setup_in_status_phase(pcd);
++		break;
++
++	case UT_ENDPOINT:
++		ep = get_ep_by_addr(pcd, UGETW(ctrl.wIndex));
++		if (ep == 0) {
++			ep0_do_stall(pcd, -DWC_E_NOT_SUPPORTED);
++			return;
++		}
++
++		pcd_clear_halt(pcd, ep);
++
++		break;
++	}
++}
++
++/**
++ * This function process the SET_ADDRESS Setup Commands.
++ */
++static inline void do_set_address(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++
++	if (ctrl.bmRequestType == UT_DEVICE) {
++		dcfg_data_t dcfg = {.d32 = 0 };
++
++#ifdef DEBUG_EP0
++//                      DWC_DEBUGPL(DBG_PCDV, "SET_ADDRESS:%d\n", ctrl.wValue);
++#endif
++		dcfg.b.devaddr = UGETW(ctrl.wValue);
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dcfg, 0, dcfg.d32);
++		do_setup_in_status_phase(pcd);
++	}
++}
++
++/**
++ *	This function processes SETUP commands. In Linux, the USB Command
++ *	processing is done in two places - the first being the PCD and the
++ *	second in the Gadget Driver (for example, the File-Backed Storage
++ *	Gadget Driver).
++ *
++ * <table>
++ * <tr><td>Command	</td><td>Driver </td><td>Description</td></tr>
++ *
++ * <tr><td>GET_STATUS </td><td>PCD </td><td>Command is processed as
++ * defined in chapter 9 of the USB 2.0 Specification chapter 9
++ * </td></tr>
++ *
++ * <tr><td>CLEAR_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are the ENDPOINT_HALT feature is procesed, all others the
++ * interface requests are ignored.</td></tr>
++ *
++ * <tr><td>SET_FEATURE </td><td>PCD </td><td>The Device and Endpoint
++ * requests are processed by the PCD.  Interface requests are passed
++ * to the Gadget Driver.</td></tr>
++ *
++ * <tr><td>SET_ADDRESS </td><td>PCD </td><td>Program the DCFG reg,
++ * with device address received </td></tr>
++ *
++ * <tr><td>GET_DESCRIPTOR </td><td>Gadget Driver </td><td>Return the
++ * requested descriptor</td></tr>
++ *
++ * <tr><td>SET_DESCRIPTOR </td><td>Gadget Driver </td><td>Optional -
++ * not implemented by any of the existing Gadget Drivers.</td></tr>
++ *
++ * <tr><td>SET_CONFIGURATION </td><td>Gadget Driver </td><td>Disable
++ * all EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_CONFIGURATION </td><td>Gadget Driver </td><td>Return
++ * the current configuration</td></tr>
++ *
++ * <tr><td>SET_INTERFACE </td><td>Gadget Driver </td><td>Disable all
++ * EPs and enable EPs for new configuration.</td></tr>
++ *
++ * <tr><td>GET_INTERFACE </td><td>Gadget Driver </td><td>Return the
++ * current interface.</td></tr>
++ *
++ * <tr><td>SYNC_FRAME </td><td>PCD </td><td>Display debug
++ * message.</td></tr>
++ * </table>
++ *
++ * When the SETUP Phase Done interrupt occurs, the PCD SETUP commands are
++ * processed by pcd_setup. Calling the Function Driver's setup function from
++ * pcd_setup processes the gadget SETUP commands.
++ */
++static inline void pcd_setup(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	usb_device_request_t ctrl = pcd->setup_pkt->req;
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++
++	deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++
++#ifdef DWC_UTE_CFI
++	int retval = 0;
++	struct cfi_usb_ctrlrequest cfi_req;
++#endif
++
++	doeptsize0.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[0]->doeptsiz);
++
++	/** In BDMA more then 1 setup packet is not supported till 3.00a */
++	if (core_if->dma_enable && core_if->dma_desc_enable == 0
++	    && (doeptsize0.b.supcnt < 2)
++	    && (core_if->snpsid < OTG_CORE_REV_2_94a)) {
++		DWC_ERROR
++		    ("\n\n-----------	 CANNOT handle > 1 setup packet in DMA mode\n\n");
++	}
++	if ((core_if->snpsid >= OTG_CORE_REV_3_00a)
++	    && (core_if->dma_enable == 1) && (core_if->dma_desc_enable == 0)) {
++		ctrl =
++		    (pcd->setup_pkt +
++		     (3 - doeptsize0.b.supcnt - 1 +
++		      ep0->dwc_ep.stp_rollover))->req;
++	}
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCD, "SETUP %02x.%02x v%04x i%04x l%04x\n",
++		    ctrl.bmRequestType, ctrl.bRequest,
++		    UGETW(ctrl.wValue), UGETW(ctrl.wIndex),
++		    UGETW(ctrl.wLength));
++#endif
++
++	/* Clean up the request queue */
++	dwc_otg_request_nuke(ep0);
++	ep0->stopped = 0;
++
++	if (ctrl.bmRequestType & UE_DIR_IN) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_DATA_PHASE;
++	} else {
++		ep0->dwc_ep.is_in = 0;
++		pcd->ep0state = EP0_OUT_DATA_PHASE;
++	}
++
++	if (UGETW(ctrl.wLength) == 0) {
++		ep0->dwc_ep.is_in = 1;
++		pcd->ep0state = EP0_IN_STATUS_PHASE;
++	}
++
++	if (UT_GET_TYPE(ctrl.bmRequestType) != UT_STANDARD) {
++
++#ifdef DWC_UTE_CFI
++		DWC_MEMCPY(&cfi_req, &ctrl, sizeof(usb_device_request_t));
++
++		//printk(KERN_ALERT "CFI: req_type=0x%02x; req=0x%02x\n",
++				ctrl.bRequestType, ctrl.bRequest);
++		if (UT_GET_TYPE(cfi_req.bRequestType) == UT_VENDOR) {
++			if (cfi_req.bRequest > 0xB0 && cfi_req.bRequest < 0xBF) {
++				retval = cfi_setup(pcd, &cfi_req);
++				if (retval < 0) {
++					ep0_do_stall(pcd, retval);
++					pcd->ep0_pending = 0;
++					return;
++				}
++
++				/* if need gadget setup then call it and check the retval */
++				if (pcd->cfi->need_gadget_att) {
++					retval =
++					    cfi_gadget_setup(pcd,
++							     &pcd->
++							     cfi->ctrl_req);
++					if (retval < 0) {
++						pcd->ep0_pending = 0;
++						return;
++					}
++				}
++
++				if (pcd->cfi->need_status_in_complete) {
++					do_setup_in_status_phase(pcd);
++				}
++				return;
++			}
++		}
++#endif
++
++		/* handle non-standard (class/vendor) requests in the gadget driver */
++		do_gadget_setup(pcd, &ctrl);
++		return;
++	}
++
++	/** @todo NGS: Handle bad setup packet? */
++
++///////////////////////////////////////////
++//// --- Standard Request handling --- ////
++
++	switch (ctrl.bRequest) {
++	case UR_GET_STATUS:
++		do_get_status(pcd);
++		break;
++
++	case UR_CLEAR_FEATURE:
++		do_clear_feature(pcd);
++		break;
++
++	case UR_SET_FEATURE:
++		do_set_feature(pcd);
++		break;
++
++	case UR_SET_ADDRESS:
++		do_set_address(pcd);
++		break;
++
++	case UR_SET_INTERFACE:
++	case UR_SET_CONFIG:
++//              _pcd->request_config = 1;       /* Configuration changed */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	case UR_SYNCH_FRAME:
++		do_gadget_setup(pcd, &ctrl);
++		break;
++
++	default:
++		/* Call the Gadget Driver's setup functions */
++		do_gadget_setup(pcd, &ctrl);
++		break;
++	}
++}
++
++/**
++ * This function completes the ep0 control transfer.
++ */
++static int32_t ep0_complete_request(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++#ifdef DEBUG_EP0
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++	    dev_if->out_ep_regs[ep->dwc_ep.num];
++#endif
++	deptsiz0_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req;
++	int is_last = 0;
++	dwc_otg_pcd_t *pcd = ep->pcd;
++
++#ifdef DWC_UTE_CFI
++	struct cfi_usb_ctrlrequest *ctrlreq;
++	int retval = -DWC_E_NOT_SUPPORTED;
++#endif
++
++        desc_sts.b.bytes = 0;
++
++	if (pcd->ep0_pending && DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		if (ep->dwc_ep.is_in) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup OUT status phase\n");
++#endif
++			do_setup_out_status_phase(pcd);
++		} else {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Do setup IN status phase\n");
++#endif
++
++#ifdef DWC_UTE_CFI
++			ctrlreq = &pcd->cfi->ctrl_req;
++
++			if (UT_GET_TYPE(ctrlreq->bRequestType) == UT_VENDOR) {
++				if (ctrlreq->bRequest > 0xB0
++				    && ctrlreq->bRequest < 0xBF) {
++
++					/* Return if the PCD failed to handle the request */
++					if ((retval =
++					     pcd->cfi->ops.
++					     ctrl_write_complete(pcd->cfi,
++								 pcd)) < 0) {
++						CFI_INFO
++						    ("ERROR setting a new value in the PCD(%d)\n",
++						     retval);
++						ep0_do_stall(pcd, retval);
++						pcd->ep0_pending = 0;
++						return 0;
++					}
++
++					/* If the gadget needs to be notified on the request */
++					if (pcd->cfi->need_gadget_att == 1) {
++						//retval = do_gadget_setup(pcd, &pcd->cfi->ctrl_req);
++						retval =
++						    cfi_gadget_setup(pcd,
++								     &pcd->cfi->
++								     ctrl_req);
++
++						/* Return from the function if the gadget failed to process
++						 * the request properly - this should never happen !!!
++						 */
++						if (retval < 0) {
++							CFI_INFO
++							    ("ERROR setting a new value in the gadget(%d)\n",
++							     retval);
++							pcd->ep0_pending = 0;
++							return 0;
++						}
++					}
++
++					CFI_INFO("%s: RETVAL=%d\n", __func__,
++						 retval);
++					/* If we hit here then the PCD and the gadget has properly
++					 * handled the request - so send the ZLP IN to the host.
++					 */
++					/* @todo: MAS - decide whether we need to start the setup
++					 * stage based on the need_setup value of the cfi object
++					 */
++					do_setup_in_status_phase(pcd);
++					pcd->ep0_pending = 0;
++					return 1;
++				}
++			}
++#endif
++
++			do_setup_in_status_phase(pcd);
++		}
++		pcd->ep0_pending = 0;
++		return 1;
++	}
++
++	if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		return 0;
++	}
++	req = DWC_CIRCLEQ_FIRST(&ep->queue);
++
++	if (pcd->ep0state == EP0_OUT_STATUS_PHASE
++	    || pcd->ep0state == EP0_IN_STATUS_PHASE) {
++		is_last = 1;
++	} else if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++		if (core_if->dma_desc_enable != 0)
++			desc_sts = dev_if->in_desc_addr->status;
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d  xfersize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++
++		if (((core_if->dma_desc_enable == 0)
++		     && (deptsiz.b.xfersize == 0))
++		    || ((core_if->dma_desc_enable != 0)
++			&& (desc_sts.b.bytes == 0))) {
++			req->actual = ep->dwc_ep.xfer_count;
++			/* Is a Zero Len Packet needed? */
++			if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "Setup Rx ZLP\n");
++#endif
++				req->sent_zlp = 0;
++			}
++			do_setup_out_status_phase(pcd);
++		}
++	} else {
++		/* ep0-OUT */
++#ifdef DEBUG_EP0
++		deptsiz.d32 = DWC_READ_REG32(&out_ep_regs->doeptsiz);
++		DWC_DEBUGPL(DBG_PCDV, "%d len=%d xsize=%d pktcnt=%d\n",
++			    ep->dwc_ep.num, ep->dwc_ep.xfer_len,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++#endif
++		req->actual = ep->dwc_ep.xfer_count;
++
++		/* Is a Zero Len Packet needed? */
++		if (req->sent_zlp) {
++#ifdef DEBUG_EP0
++			DWC_DEBUGPL(DBG_PCDV, "Setup Tx ZLP\n");
++#endif
++			req->sent_zlp = 0;
++		}
++		/* For older cores do setup in status phase in Slave/BDMA modes,
++		 * starting from 3.00 do that only in slave, and for DMA modes
++		 * just re-enable ep 0 OUT here*/
++		if (core_if->dma_enable == 0
++		    || (core_if->dma_desc_enable == 0
++			&& core_if->snpsid <= OTG_CORE_REV_2_94a)) {
++			do_setup_in_status_phase(pcd);
++		} else if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++			DWC_DEBUGPL(DBG_PCDV,
++				    "Enable out ep before in status phase\n");
++			ep0_out_start(core_if, pcd);
++		}
++	}
++
++	/* Complete the request */
++	if (is_last) {
++		dwc_otg_request_done(ep, req, 0);
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++		return 1;
++	}
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++/**
++ * This function calculates traverses all the CFI DMA descriptors and
++ * and accumulates the bytes that are left to be transfered.
++ *
++ * @return The total bytes left to transfered, or a negative value as failure
++ */
++static inline int cfi_calc_desc_residue(dwc_otg_pcd_ep_t * ep)
++{
++	int32_t ret = 0;
++	int i;
++	struct dwc_otg_dma_desc *ddesc = NULL;
++	struct cfi_ep *cfiep;
++
++	/* See if the pcd_ep has its respective cfi_ep mapped */
++	cfiep = get_cfi_ep_by_pcd_ep(ep->pcd->cfi, ep);
++	if (!cfiep) {
++		CFI_INFO("%s: Failed to find ep\n", __func__);
++		return -1;
++	}
++
++	ddesc = ep->dwc_ep.descs;
++
++	for (i = 0; (i < cfiep->desc_count) && (i < MAX_DMA_DESCS_PER_EP); i++) {
++
++#if defined(PRINT_CFI_DMA_DESCS)
++		print_desc(ddesc, ep->ep.name, i);
++#endif
++		ret += ddesc->status.b.bytes;
++		ddesc++;
++	}
++
++	if (ret)
++		CFI_INFO("!!!!!!!!!! WARNING (%s) - residue=%d\n", __func__,
++			 ret);
++
++	return ret;
++}
++#endif
++
++/**
++ * This function completes the request for the EP. If there are
++ * additional requests for the EP in the queue they will be started.
++ */
++static void complete_ep(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs =
++	    dev_if->in_ep_regs[ep->dwc_ep.num];
++	deptsiz_data_t deptsiz;
++	dev_dma_desc_sts_t desc_sts;
++	dwc_otg_pcd_request_t *req = 0;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	uint32_t byte_count = 0;
++	int is_last = 0;
++	int i;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s() %d-%s\n", __func__, ep->dwc_ep.num,
++		    (ep->dwc_ep.is_in ? "IN" : "OUT"));
++
++	/* Get any pending requests */
++	if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++		req = DWC_CIRCLEQ_FIRST(&ep->queue);
++		if (!req) {
++			DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++			return;
++		}
++	} else {
++		DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "Requests %d\n", ep->pcd->request_pending);
++
++	if (ep->dwc_ep.is_in) {
++		deptsiz.d32 = DWC_READ_REG32(&in_ep_regs->dieptsiz);
++
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable == 0) {
++				if (deptsiz.b.xfersize == 0
++				    && deptsiz.b.pktcnt == 0) {
++					byte_count =
++					    ep->dwc_ep.xfer_len -
++					    ep->dwc_ep.xfer_count;
++
++					ep->dwc_ep.xfer_buff += byte_count;
++					ep->dwc_ep.dma_addr += byte_count;
++					ep->dwc_ep.xfer_count += byte_count;
++
++					DWC_DEBUGPL(DBG_PCDV,
++						    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++						    ep->dwc_ep.num,
++						    (ep->dwc_ep.
++						     is_in ? "IN" : "OUT"),
++						    ep->dwc_ep.xfer_len,
++						    deptsiz.b.xfersize,
++						    deptsiz.b.pktcnt);
++
++					if (ep->dwc_ep.xfer_len <
++					    ep->dwc_ep.total_len) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else if (ep->dwc_ep.sent_zlp) {
++						/*
++						 * This fragment of code should initiate 0
++						 * length transfer in case if it is queued
++						 * a transfer with size divisible to EPs max
++						 * packet size and with usb_request zero field
++						 * is set, which means that after data is transfered,
++						 * it is also should be transfered
++						 * a 0 length packet at the end. For Slave and
++						 * Buffer DMA modes in this case SW has
++						 * to initiate 2 transfers one with transfer size,
++						 * and the second with 0 size. For Descriptor
++						 * DMA mode SW is able to initiate a transfer,
++						 * which will handle all the packets including
++						 * the last  0 length.
++						 */
++						ep->dwc_ep.sent_zlp = 0;
++						dwc_otg_ep_start_zl_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					if (ep->dwc_ep.type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						req->actual = 0;
++						dwc_otg_request_done(ep, req, 0);
++
++						ep->dwc_ep.start_xfer_buff = 0;
++						ep->dwc_ep.xfer_buff = 0;
++						ep->dwc_ep.xfer_len = 0;
++
++						/* If there is a request in the queue start it. */
++						start_next_request(ep);
++					} else
++						DWC_WARN
++						("Incomplete transfer (%d - %s [siz=%d pkt=%d])\n",
++						ep->dwc_ep.num,
++						(ep->dwc_ep.is_in ? "IN" : "OUT"),
++						deptsiz.b.xfersize,
++						deptsiz.b.pktcnt);
++				}
++			} else {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++
++					byte_count = residue;
++				} else {
++#endif
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++					desc_sts = dma_desc->status;
++					byte_count += desc_sts.b.bytes;
++					dma_desc++;
++				}
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				if (byte_count == 0) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len;
++					is_last = 1;
++				} else {
++					DWC_WARN("Incomplete transfer\n");
++				}
++			}
++		} else {
++			if (deptsiz.b.xfersize == 0 && deptsiz.b.pktcnt == 0) {
++				DWC_DEBUGPL(DBG_PCDV,
++					    "%d-%s len=%d  xfersize=%d pktcnt=%d\n",
++					    ep->dwc_ep.num,
++					    ep->dwc_ep.is_in ? "IN" : "OUT",
++					    ep->dwc_ep.xfer_len,
++					    deptsiz.b.xfersize,
++					    deptsiz.b.pktcnt);
++
++				/*      Check if the whole transfer was completed,
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			} else {
++				DWC_WARN
++				    ("Incomplete transfer (%d-%s [siz=%d pkt=%d])\n",
++				     ep->dwc_ep.num,
++				     (ep->dwc_ep.is_in ? "IN" : "OUT"),
++				     deptsiz.b.xfersize, deptsiz.b.pktcnt);
++			}
++		}
++	} else {
++		dwc_otg_dev_out_ep_regs_t *out_ep_regs =
++		    dev_if->out_ep_regs[ep->dwc_ep.num];
++		desc_sts.d32 = 0;
++		if (core_if->dma_enable) {
++			if (core_if->dma_desc_enable) {
++				dma_desc = ep->dwc_ep.desc_addr;
++				byte_count = 0;
++				ep->dwc_ep.sent_zlp = 0;
++
++#ifdef DWC_UTE_CFI
++				CFI_INFO("%s: BUFFER_MODE=%d\n", __func__,
++					 ep->dwc_ep.buff_mode);
++				if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++					int residue;
++					residue = cfi_calc_desc_residue(ep);
++					if (residue < 0)
++						return;
++					byte_count = residue;
++				} else {
++#endif
++
++					for (i = 0; i < ep->dwc_ep.desc_cnt;
++					     ++i) {
++						desc_sts = dma_desc->status;
++						byte_count += desc_sts.b.bytes;
++						dma_desc++;
++					}
++
++#ifdef DWC_UTE_CFI
++				}
++#endif
++				/* Checking for interrupt Out transfers with not
++				 * dword aligned mps sizes
++				 */
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_INTR &&
++							(ep->dwc_ep.maxpacket%4)) {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count;
++					if ((ep->dwc_ep.xfer_len %
++					     ep->dwc_ep.maxpacket)
++					    && (ep->dwc_ep.xfer_len /
++						ep->dwc_ep.maxpacket <
++						MAX_DMA_DESC_CNT))
++						ep->dwc_ep.xfer_len -=
++						    (ep->dwc_ep.desc_cnt -
++						     1) * ep->dwc_ep.maxpacket +
++						    ep->dwc_ep.xfer_len %
++						    ep->dwc_ep.maxpacket;
++					else
++						ep->dwc_ep.xfer_len -=
++						    ep->dwc_ep.desc_cnt *
++						    ep->dwc_ep.maxpacket;
++					if (ep->dwc_ep.xfer_len > 0) {
++						dwc_otg_ep_start_transfer
++						    (core_if, &ep->dwc_ep);
++					} else {
++						is_last = 1;
++					}
++				} else {
++					ep->dwc_ep.xfer_count =
++					    ep->dwc_ep.total_len - byte_count +
++					    ((4 -
++					      (ep->dwc_ep.
++					       total_len & 0x3)) & 0x3);
++					is_last = 1;
++				}
++			} else {
++				deptsiz.d32 = 0;
++				deptsiz.d32 =
++				    DWC_READ_REG32(&out_ep_regs->doeptsiz);
++
++				byte_count = (ep->dwc_ep.xfer_len -
++					      ep->dwc_ep.xfer_count -
++					      deptsiz.b.xfersize);
++				ep->dwc_ep.xfer_buff += byte_count;
++				ep->dwc_ep.dma_addr += byte_count;
++				ep->dwc_ep.xfer_count += byte_count;
++
++				/*      Check if the whole transfer was completed,
++				 *      if no, setup transfer for next portion of data
++				 */
++				if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++					dwc_otg_ep_start_transfer(core_if,
++								  &ep->dwc_ep);
++				} else if (ep->dwc_ep.sent_zlp) {
++					/*
++					 * This fragment of code should initiate 0
++					 * length trasfer in case if it is queued
++					 * a trasfer with size divisible to EPs max
++					 * packet size and with usb_request zero field
++					 * is set, which means that after data is transfered,
++					 * it is also should be transfered
++					 * a 0 length packet at the end. For Slave and
++					 * Buffer DMA modes in this case SW has
++					 * to initiate 2 transfers one with transfer size,
++					 * and the second with 0 size. For Desriptor
++					 * DMA mode SW is able to initiate a transfer,
++					 * which will handle all the packets including
++					 * the last  0 legth.
++					 */
++					ep->dwc_ep.sent_zlp = 0;
++					dwc_otg_ep_start_zl_transfer(core_if,
++								     &ep->dwc_ep);
++				} else {
++					is_last = 1;
++				}
++			}
++		} else {
++			/*      Check if the whole transfer was completed,
++			 *      if no, setup transfer for next portion of data
++			 */
++			if (ep->dwc_ep.xfer_len < ep->dwc_ep.total_len) {
++				dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++			} else if (ep->dwc_ep.sent_zlp) {
++				/*
++				 * This fragment of code should initiate 0
++				 * length transfer in case if it is queued
++				 * a transfer with size divisible to EPs max
++				 * packet size and with usb_request zero field
++				 * is set, which means that after data is transfered,
++				 * it is also should be transfered
++				 * a 0 length packet at the end. For Slave and
++				 * Buffer DMA modes in this case SW has
++				 * to initiate 2 transfers one with transfer size,
++				 * and the second with 0 size. For Descriptor
++				 * DMA mode SW is able to initiate a transfer,
++				 * which will handle all the packets including
++				 * the last  0 length.
++				 */
++				ep->dwc_ep.sent_zlp = 0;
++				dwc_otg_ep_start_zl_transfer(core_if,
++							     &ep->dwc_ep);
++			} else {
++				is_last = 1;
++			}
++		}
++
++		DWC_DEBUGPL(DBG_PCDV,
++			    "addr %p,	 %d-%s len=%d cnt=%d xsize=%d pktcnt=%d\n",
++			    &out_ep_regs->doeptsiz, ep->dwc_ep.num,
++			    ep->dwc_ep.is_in ? "IN" : "OUT",
++			    ep->dwc_ep.xfer_len, ep->dwc_ep.xfer_count,
++			    deptsiz.b.xfersize, deptsiz.b.pktcnt);
++	}
++
++	/* Complete the request */
++	if (is_last) {
++#ifdef DWC_UTE_CFI
++		if (ep->dwc_ep.buff_mode != BM_STANDARD) {
++			req->actual = ep->dwc_ep.cfi_req_len - byte_count;
++		} else {
++#endif
++			req->actual = ep->dwc_ep.xfer_count;
++#ifdef DWC_UTE_CFI
++		}
++#endif
++		if (req->dw_align_buf) {
++			if (!ep->dwc_ep.is_in) {
++				dwc_memcpy(req->buf, req->dw_align_buf, req->length);
++			}
++			DWC_DMA_FREE(req->length, req->dw_align_buf,
++				     req->dw_align_buf_dma);
++		}
++
++		dwc_otg_request_done(ep, req, 0);
++
++		ep->dwc_ep.start_xfer_buff = 0;
++		ep->dwc_ep.xfer_buff = 0;
++		ep->dwc_ep.xfer_len = 0;
++
++		/* If there is a request in the queue start it. */
++		start_next_request(ep);
++	}
++}
++
++#ifdef DWC_EN_ISOC
++
++/**
++ * This function BNA interrupt for Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_iso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	int i;
++
++	dma_desc =
++	    dwc_ep->iso_desc_addr + dwc_ep->desc_cnt * (dwc_ep->proc_buf_num);
++
++	if (dwc_ep->is_in) {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_in.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	} else {
++		dev_dma_desc_sts_t sts = {.d32 = 0 };
++		for (i = 0; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++			sts.d32 = dma_desc->status.d32;
++			sts.b_iso_out.bs = BS_HOST_READY;
++			dma_desc->status.d32 = sts.d32;
++		}
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->
++							   num]->doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	DWC_MODIFY_REG32(addr, depctl.d32, depctl.d32);
++}
++
++/**
++ * This function sets latest iso packet information(non-PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++void set_current_pkt_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	dma_addr_t dma_addr;
++	uint32_t offset;
++
++	if (ep->proc_buf_num)
++		dma_addr = ep->dma_addr1;
++	else
++		dma_addr = ep->dma_addr0;
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   in_ep_regs[ep->num]->dieptsiz);
++		offset = ep->data_per_frame;
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->
++				   out_ep_regs[ep->num]->doeptsiz);
++		offset =
++		    ep->data_per_frame +
++		    (0x4 & (0x4 - (ep->data_per_frame & 0x3)));
++	}
++
++	if (!deptsiz.b.xfersize) {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = 0;
++	} else {
++		ep->pkt_info[ep->cur_pkt].length = ep->data_per_frame;
++		ep->pkt_info[ep->cur_pkt].offset =
++		    ep->cur_pkt_dma_addr - dma_addr;
++		ep->pkt_info[ep->cur_pkt].status = -DWC_E_NO_DATA;
++	}
++	ep->cur_pkt_addr += offset;
++	ep->cur_pkt_dma_addr += offset;
++	ep->cur_pkt++;
++}
++
++/**
++ * This function sets latest iso packet information(DDMA mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void set_ddma_iso_pkts_info(dwc_otg_core_if_t * core_if,
++				   dwc_ep_t * dwc_ep)
++{
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	iso_pkt_info_t *iso_packet;
++	uint32_t data_per_desc;
++	uint32_t offset;
++	int i, j;
++
++	iso_packet = dwc_ep->pkt_info;
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++		offset = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++
++				sts.d32 = dma_desc->status.d32;
++
++				/* Write status in iso_packet_decsriptor  */
++				iso_packet->status =
++				    sts.b_iso_out.rxsts +
++				    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++				if (iso_packet->status) {
++					iso_packet->status = -DWC_E_NO_DATA;
++				}
++
++				/* Received data length */
++				if (!sts.b_iso_out.rxbytes) {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes;
++				} else {
++					iso_packet->length =
++					    data_per_desc -
++					    sts.b_iso_out.rxbytes + (4 -
++								     dwc_ep->data_per_frame
++								     % 4);
++				}
++
++				iso_packet->offset = offset;
++
++				offset += data_per_desc;
++				dma_desc++;
++				iso_packet++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso_packet_decsriptor  */
++			iso_packet->status =
++			    sts.b_iso_out.rxsts +
++			    (sts.b_iso_out.bs ^ BS_DMA_DONE);
++			if (iso_packet->status) {
++				iso_packet->status = -DWC_E_NO_DATA;
++			}
++
++			/* Received data length */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++
++			iso_packet->offset = offset;
++
++			offset += data_per_desc;
++			iso_packet++;
++			dma_desc++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++
++		/* Write status in iso_packet_decsriptor  */
++		iso_packet->status =
++		    sts.b_iso_out.rxsts + (sts.b_iso_out.bs ^ BS_DMA_DONE);
++		if (iso_packet->status) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++		/* Received data length */
++		if (!sts.b_iso_out.rxbytes) {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes;
++		} else {
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_out.rxbytes +
++			    (4 - dwc_ep->data_per_frame % 4);
++		}
++
++		iso_packet->offset = offset;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			sts.d32 = dma_desc->status.d32;
++
++			/* Write status in iso packet descriptor */
++			iso_packet->status =
++			    sts.b_iso_in.txsts +
++			    (sts.b_iso_in.bs ^ BS_DMA_DONE);
++			if (iso_packet->status != 0) {
++				iso_packet->status = -DWC_E_NO_DATA;
++
++			}
++			/* Bytes has been transfered */
++			iso_packet->length =
++			    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++
++			dma_desc++;
++			iso_packet++;
++		}
++
++		sts.d32 = dma_desc->status.d32;
++		while (sts.b_iso_in.bs == BS_DMA_BUSY) {
++			sts.d32 = dma_desc->status.d32;
++		}
++
++		/* Write status in iso packet descriptor ??? do be done with ERROR codes */
++		iso_packet->status =
++		    sts.b_iso_in.txsts + (sts.b_iso_in.bs ^ BS_DMA_DONE);
++		if (iso_packet->status != 0) {
++			iso_packet->status = -DWC_E_NO_DATA;
++		}
++
++		/* Bytes has been transfered */
++		iso_packet->length =
++		    dwc_ep->data_per_frame - sts.b_iso_in.txbytes;
++	}
++}
++
++/**
++ * This function reinitialize DMA Descriptors for Isochronous transfer
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP to start the transfer on.
++ *
++ */
++static void reinit_ddma_iso_xfer(dwc_otg_core_if_t * core_if, dwc_ep_t * dwc_ep)
++{
++	int i, j;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dma_addr_t dma_ad;
++	volatile uint32_t *addr;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	uint32_t data_per_desc;
++
++	if (dwc_ep->is_in == 0) {
++		addr = &core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl;
++	} else {
++		addr = &core_if->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++
++	if (dwc_ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = dwc_ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = dwc_ep->dma_addr1;
++	}
++
++	/** Reinit closed DMA Descriptors*/
++	/** ISO OUT EP */
++	if (dwc_ep->is_in == 0) {
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_out.bs = BS_HOST_READY;
++		sts.b_iso_out.rxsts = 0;
++		sts.b_iso_out.l = 0;
++		sts.b_iso_out.sp = 0;
++		sts.b_iso_out.ioc = 0;
++		sts.b_iso_out.pid = 0;
++		sts.b_iso_out.framenum = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - dwc_ep->pkt_per_frm;
++		     i += dwc_ep->pkt_per_frm) {
++			for (j = 0; j < dwc_ep->pkt_per_frm; ++j) {
++				data_per_desc =
++				    ((j + 1) * dwc_ep->maxpacket >
++				     dwc_ep->
++				     data_per_frame) ? dwc_ep->data_per_frame -
++				    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++				data_per_desc +=
++				    (data_per_desc % 4) ? (4 -
++							   data_per_desc %
++							   4) : 0;
++				sts.b_iso_out.rxbytes = data_per_desc;
++				dma_desc->buf = dma_ad;
++				dma_desc->status.d32 = sts.d32;
++
++				dma_ad += data_per_desc;
++				dma_desc++;
++			}
++		}
++
++		for (j = 0; j < dwc_ep->pkt_per_frm - 1; ++j) {
++
++			data_per_desc =
++			    ((j + 1) * dwc_ep->maxpacket >
++			     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++			    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++			data_per_desc +=
++			    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++			sts.b_iso_out.rxbytes = data_per_desc;
++
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			dma_desc++;
++			dma_ad += data_per_desc;
++		}
++
++		sts.b_iso_out.ioc = 1;
++		sts.b_iso_out.l = dwc_ep->proc_buf_num;
++
++		data_per_desc =
++		    ((j + 1) * dwc_ep->maxpacket >
++		     dwc_ep->data_per_frame) ? dwc_ep->data_per_frame -
++		    j * dwc_ep->maxpacket : dwc_ep->maxpacket;
++		data_per_desc +=
++		    (data_per_desc % 4) ? (4 - data_per_desc % 4) : 0;
++		sts.b_iso_out.rxbytes = data_per_desc;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++	} else {
++/** ISO IN EP */
++
++		dma_desc =
++		    dwc_ep->iso_desc_addr +
++		    dwc_ep->desc_cnt * dwc_ep->proc_buf_num;
++
++		sts.b_iso_in.bs = BS_HOST_READY;
++		sts.b_iso_in.txsts = 0;
++		sts.b_iso_in.sp = 0;
++		sts.b_iso_in.ioc = 0;
++		sts.b_iso_in.pid = dwc_ep->pkt_per_frm;
++		sts.b_iso_in.framenum = dwc_ep->next_frame;
++		sts.b_iso_in.txbytes = dwc_ep->data_per_frame;
++		sts.b_iso_in.l = 0;
++
++		for (i = 0; i < dwc_ep->desc_cnt - 1; i++) {
++			dma_desc->buf = dma_ad;
++			dma_desc->status.d32 = sts.d32;
++
++			sts.b_iso_in.framenum += dwc_ep->bInterval;
++			dma_ad += dwc_ep->data_per_frame;
++			dma_desc++;
++		}
++
++		sts.b_iso_in.ioc = 1;
++		sts.b_iso_in.l = dwc_ep->proc_buf_num;
++
++		dma_desc->buf = dma_ad;
++		dma_desc->status.d32 = sts.d32;
++
++		dwc_ep->next_frame =
++		    sts.b_iso_in.framenum + dwc_ep->bInterval * 1;
++	}
++	dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ * in case Iso out packet was dropped
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param dwc_ep The EP for wihich transfer complete was asserted
++ *
++ */
++static uint32_t handle_iso_out_pkt_dropped(dwc_otg_core_if_t * core_if,
++					   dwc_ep_t * dwc_ep)
++{
++	uint32_t dma_addr;
++	uint32_t drp_pkt;
++	uint32_t drp_pkt_cnt;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	int i;
++
++	deptsiz.d32 =
++	    DWC_READ_REG32(&core_if->dev_if->
++			   out_ep_regs[dwc_ep->num]->doeptsiz);
++
++	drp_pkt = dwc_ep->pkt_cnt - deptsiz.b.pktcnt;
++	drp_pkt_cnt = dwc_ep->pkt_per_frm - (drp_pkt % dwc_ep->pkt_per_frm);
++
++	/* Setting dropped packets status */
++	for (i = 0; i < drp_pkt_cnt; ++i) {
++		dwc_ep->pkt_info[drp_pkt].status = -DWC_E_NO_DATA;
++		drp_pkt++;
++		deptsiz.b.pktcnt--;
++	}
++
++	if (deptsiz.b.pktcnt > 0) {
++		deptsiz.b.xfersize =
++		    dwc_ep->xfer_len - (dwc_ep->pkt_cnt -
++					deptsiz.b.pktcnt) * dwc_ep->maxpacket;
++	} else {
++		deptsiz.b.xfersize = 0;
++		deptsiz.b.pktcnt = 0;
++	}
++
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz,
++			deptsiz.d32);
++
++	if (deptsiz.b.pktcnt > 0) {
++		if (dwc_ep->proc_buf_num) {
++			dma_addr =
++			    dwc_ep->dma_addr1 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;
++		} else {
++			dma_addr =
++			    dwc_ep->dma_addr0 + dwc_ep->xfer_len -
++			    deptsiz.b.xfersize;;
++		}
++
++		DWC_WRITE_REG32(&core_if->dev_if->
++				out_ep_regs[dwc_ep->num]->doepdma, dma_addr);
++
++		/** Re-enable endpoint, clear nak  */
++		depctl.d32 = 0;
++		depctl.b.epena = 1;
++		depctl.b.cnak = 1;
++
++		DWC_MODIFY_REG32(&core_if->dev_if->
++				 out_ep_regs[dwc_ep->num]->doepctl, depctl.d32,
++				 depctl.d32);
++		return 0;
++	} else {
++		return 1;
++	}
++}
++
++/**
++ * This function sets iso packets information(PTI mode)
++ *
++ * @param core_if Programming view of DWC_otg controller.
++ * @param ep The EP to start the transfer on.
++ *
++ */
++static uint32_t set_iso_pkts_info(dwc_otg_core_if_t * core_if, dwc_ep_t * ep)
++{
++	int i, j;
++	dma_addr_t dma_ad;
++	iso_pkt_info_t *packet_info = ep->pkt_info;
++	uint32_t offset;
++	uint32_t frame_data;
++	deptsiz_data_t deptsiz;
++
++	if (ep->proc_buf_num == 0) {
++		/** Buffer 0 descriptors setup */
++		dma_ad = ep->dma_addr0;
++	} else {
++		/** Buffer 1 descriptors setup */
++		dma_ad = ep->dma_addr1;
++	}
++
++	if (ep->is_in) {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->in_ep_regs[ep->num]->
++				   dieptsiz);
++	} else {
++		deptsiz.d32 =
++		    DWC_READ_REG32(&core_if->dev_if->out_ep_regs[ep->num]->
++				   doeptsiz);
++	}
++
++	if (!deptsiz.b.xfersize) {
++		offset = 0;
++		for (i = 0; i < ep->pkt_cnt; i += ep->pkt_per_frm) {
++			frame_data = ep->data_per_frame;
++			for (j = 0; j < ep->pkt_per_frm; ++j) {
++
++				/* Packet status - is not set as initially
++				 * it is set to 0 and if packet was sent
++				 successfully, status field will remain 0*/
++
++				/* Bytes has been transfered */
++				packet_info->length =
++				    (ep->maxpacket <
++				     frame_data) ? ep->maxpacket : frame_data;
++
++				/* Received packet offset */
++				packet_info->offset = offset;
++				offset += packet_info->length;
++				frame_data -= packet_info->length;
++
++				packet_info++;
++			}
++		}
++		return 1;
++	} else {
++		/* This is a workaround for in case of Transfer Complete with
++		 * PktDrpSts interrupts merging - in this case Transfer complete
++		 * interrupt for Isoc Out Endpoint is asserted without PktDrpSts
++		 * set and with DOEPTSIZ register non zero. Investigations showed,
++		 * that this happens when Out packet is dropped, but because of
++		 * interrupts merging during first interrupt handling PktDrpSts
++		 * bit is cleared and for next merged interrupts it is not reset.
++		 * In this case SW hadles the interrupt as if PktDrpSts bit is set.
++		 */
++		if (ep->is_in) {
++			return 1;
++		} else {
++			return handle_iso_out_pkt_dropped(core_if, ep);
++		}
++	}
++}
++
++/**
++ * This function is to handle Iso EP transfer complete interrupt
++ *
++ * @param pcd The PCD
++ * @param ep The EP for which transfer complete was asserted
++ *
++ */
++static void complete_iso_ep(dwc_otg_pcd_t * pcd, dwc_otg_pcd_ep_t * ep)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(ep->pcd);
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	uint8_t is_last = 0;
++
++	if (ep->dwc_ep.next_frame == 0xffffffff) {
++		DWC_WARN("Next frame is not set!\n");
++		return;
++	}
++
++	if (core_if->dma_enable) {
++		if (core_if->dma_desc_enable) {
++			set_ddma_iso_pkts_info(core_if, dwc_ep);
++			reinit_ddma_iso_xfer(core_if, dwc_ep);
++			is_last = 1;
++		} else {
++			if (core_if->pti_enh_enable) {
++				if (set_iso_pkts_info(core_if, dwc_ep)) {
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					dwc_otg_iso_ep_start_buf_transfer
++					    (core_if, dwc_ep);
++					is_last = 1;
++				}
++			} else {
++				set_current_pkt_info(core_if, dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					is_last = 1;
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++				dwc_otg_iso_ep_start_frm_transfer(core_if,
++								  dwc_ep);
++			}
++		}
++	} else {
++		set_current_pkt_info(core_if, dwc_ep);
++		if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++			is_last = 1;
++			dwc_ep->cur_pkt = 0;
++			dwc_ep->proc_buf_num = (dwc_ep->proc_buf_num ^ 1) & 0x1;
++			if (dwc_ep->proc_buf_num) {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff1;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr1;
++			} else {
++				dwc_ep->cur_pkt_addr = dwc_ep->xfer_buff0;
++				dwc_ep->cur_pkt_dma_addr = dwc_ep->dma_addr0;
++			}
++
++		}
++		dwc_otg_iso_ep_start_frm_transfer(core_if, dwc_ep);
++	}
++	if (is_last)
++		dwc_otg_iso_buffer_done(pcd, ep, ep->iso_req_handle);
++}
++#endif /* DWC_EN_ISOC */
++
++/**
++ * This function handle BNA interrupt for Non Isochronous EPs
++ *
++ */
++static void dwc_otg_pcd_handle_noniso_bna(dwc_otg_pcd_ep_t * ep)
++{
++	dwc_ep_t *dwc_ep = &ep->dwc_ep;
++	volatile uint32_t *addr;
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_otg_pcd_t *pcd = ep->pcd;
++	dwc_otg_dev_dma_desc_t *dma_desc;
++	dev_dma_desc_sts_t sts = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if = ep->pcd->core_if;
++	int i, start;
++
++	if (!dwc_ep->desc_cnt)
++		DWC_WARN("Ep%d %s Descriptor count = %d \n", dwc_ep->num,
++			 (dwc_ep->is_in ? "IN" : "OUT"), dwc_ep->desc_cnt);
++
++	if (core_if->core_params->cont_on_bna && !dwc_ep->is_in
++							&& dwc_ep->type != DWC_OTG_EP_TYPE_CONTROL) {
++		uint32_t doepdma;
++		dwc_otg_dev_out_ep_regs_t *out_regs =
++			core_if->dev_if->out_ep_regs[dwc_ep->num];
++		doepdma = DWC_READ_REG32(&(out_regs->doepdma));
++		start = (doepdma - dwc_ep->dma_desc_addr)/sizeof(dwc_otg_dev_dma_desc_t);
++		dma_desc = &(dwc_ep->desc_addr[start]);
++	} else {
++		start = 0;
++		dma_desc = dwc_ep->desc_addr;
++	}
++
++
++	for (i = start; i < dwc_ep->desc_cnt; ++i, ++dma_desc) {
++		sts.d32 = dma_desc->status.d32;
++		sts.b.bs = BS_HOST_READY;
++		dma_desc->status.d32 = sts.d32;
++	}
++
++	if (dwc_ep->is_in == 0) {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->out_ep_regs[dwc_ep->num]->
++		    doepctl;
++	} else {
++		addr =
++		    &GET_CORE_IF(pcd)->dev_if->in_ep_regs[dwc_ep->num]->diepctl;
++	}
++	depctl.b.epena = 1;
++	depctl.b.cnak = 1;
++	DWC_MODIFY_REG32(addr, 0, depctl.d32);
++}
++
++/**
++ * This function handles EP0 Control transfers.
++ *
++ * The state of the control transfers are tracked in
++ * <code>ep0state</code>.
++ */
++static void handle_ep0(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_pcd_ep_t *ep0 = &pcd->ep0;
++	dev_dma_desc_sts_t desc_sts;
++	deptsiz0_data_t deptsiz;
++	uint32_t byte_count;
++
++#ifdef DEBUG_EP0
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++	print_ep0_state(pcd);
++#endif
++
++//      DWC_PRINTF("HANDLE EP0\n");
++
++	switch (pcd->ep0state) {
++	case EP0_DISCONNECT:
++		break;
++
++	case EP0_IDLE:
++		pcd->request_config = 0;
++
++		pcd_setup(pcd);
++		break;
++
++	case EP0_IN_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_IN EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++
++		if (core_if->dma_enable != 0) {
++			/*
++			 * For EP0 we can only program 1 packet at a time so we
++			 * need to do the make calculations after each complete.
++			 * Call write_packet to make the calculations, as in
++			 * slave mode, and use those values to determine if we
++			 * can complete.
++			 */
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->in_ep_regs[0]->
++						   dieptsiz);
++				byte_count =
++				    ep0->dwc_ep.xfer_len - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->in_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.xfer_len - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++	case EP0_OUT_DATA_PHASE:
++#ifdef DEBUG_EP0
++		DWC_DEBUGPL(DBG_PCD, "DATA_OUT EP%d-%s: type=%d, mps=%d\n",
++			    ep0->dwc_ep.num, (ep0->dwc_ep.is_in ? "IN" : "OUT"),
++			    ep0->dwc_ep.type, ep0->dwc_ep.maxpacket);
++#endif
++		if (core_if->dma_enable != 0) {
++			if (core_if->dma_desc_enable == 0) {
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->
++						   dev_if->out_ep_regs[0]->
++						   doeptsiz);
++				byte_count =
++				    ep0->dwc_ep.maxpacket - deptsiz.b.xfersize;
++			} else {
++				desc_sts =
++				    core_if->dev_if->out_desc_addr->status;
++				byte_count =
++				    ep0->dwc_ep.maxpacket - desc_sts.b.bytes;
++			}
++			ep0->dwc_ep.xfer_count += byte_count;
++			ep0->dwc_ep.xfer_buff += byte_count;
++			ep0->dwc_ep.dma_addr += byte_count;
++		}
++		if (ep0->dwc_ep.xfer_count < ep0->dwc_ep.total_len) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER\n");
++		} else if (ep0->dwc_ep.sent_zlp) {
++			dwc_otg_ep0_continue_transfer(GET_CORE_IF(pcd),
++						      &ep0->dwc_ep);
++			ep0->dwc_ep.sent_zlp = 0;
++			DWC_DEBUGPL(DBG_PCD, "CONTINUE TRANSFER sent zlp\n");
++		} else {
++			ep0_complete_request(ep0);
++			DWC_DEBUGPL(DBG_PCD, "COMPLETE TRANSFER\n");
++		}
++		break;
++
++	case EP0_IN_STATUS_PHASE:
++	case EP0_OUT_STATUS_PHASE:
++		DWC_DEBUGPL(DBG_PCD, "CASE: EP0_STATUS\n");
++		ep0_complete_request(ep0);
++		pcd->ep0state = EP0_IDLE;
++		ep0->stopped = 1;
++		ep0->dwc_ep.is_in = 0;	/* OUT for next SETUP */
++
++		/* Prepare for more SETUP Packets */
++		if (core_if->dma_enable) {
++			ep0_out_start(core_if, pcd);
++		}
++		break;
++
++	case EP0_STALL:
++		DWC_ERROR("EP0 STALLed, should not get here pcd_setup()\n");
++		break;
++	}
++#ifdef DEBUG_EP0
++	print_ep0_state(pcd);
++#endif
++}
++
++/**
++ * Restart transfer
++ */
++static void restart_transfer(dwc_otg_pcd_t * pcd, const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if;
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	ep = get_in_ep(pcd, epnum);
++
++#ifdef DWC_EN_ISOC
++	if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++		return;
++	}
++#endif /* DWC_EN_ISOC  */
++
++	core_if = GET_CORE_IF(pcd);
++	dev_if = core_if->dev_if;
++
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++
++	DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x xfer_len=%0x"
++		    " stopped=%d\n", ep->dwc_ep.xfer_buff,
++		    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len, ep->stopped);
++	/*
++	 * If xfersize is 0 and pktcnt in not 0, resend the last packet.
++	 */
++	if (dieptsiz.b.pktcnt && dieptsiz.b.xfersize == 0 &&
++	    ep->dwc_ep.start_xfer_buff != 0) {
++		if (ep->dwc_ep.total_len <= ep->dwc_ep.maxpacket) {
++			ep->dwc_ep.xfer_count = 0;
++			ep->dwc_ep.xfer_buff = ep->dwc_ep.start_xfer_buff;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		} else {
++			ep->dwc_ep.xfer_count -= ep->dwc_ep.maxpacket;
++			/* convert packet size to dwords. */
++			ep->dwc_ep.xfer_buff -= ep->dwc_ep.maxpacket;
++			ep->dwc_ep.xfer_len = ep->dwc_ep.xfer_count;
++		}
++		ep->stopped = 0;
++		DWC_DEBUGPL(DBG_PCD, "xfer_buff=%p xfer_count=%0x "
++			    "xfer_len=%0x stopped=%d\n",
++			    ep->dwc_ep.xfer_buff,
++			    ep->dwc_ep.xfer_count, ep->dwc_ep.xfer_len,
++			    ep->stopped);
++		if (epnum == 0) {
++			dwc_otg_ep0_start_transfer(core_if, &ep->dwc_ep);
++		} else {
++			dwc_otg_ep_start_transfer(core_if, &ep->dwc_ep);
++		}
++	}
++}
++
++/*
++ * This function create new nextep sequnce based on Learn Queue.
++ *
++ * @param core_if Programming view of DWC_otg controller
++ */
++void predict_nextep_seq( dwc_otg_core_if_t * core_if)
++{
++	dwc_otg_device_global_regs_t *dev_global_regs =
++	    core_if->dev_if->dev_global_regs;
++	const uint32_t TOKEN_Q_DEPTH = core_if->hwcfg2.b.dev_token_q_depth;
++	/* Number of Token Queue Registers */
++	const int DTKNQ_REG_CNT = (TOKEN_Q_DEPTH + 7) / 8;
++	dtknq1_data_t dtknqr1;
++	uint32_t in_tkn_epnums[4];
++	uint8_t seqnum[MAX_EPS_CHANNELS];
++	uint8_t intkn_seq[TOKEN_Q_DEPTH];
++	grstctl_t resetctl = {.d32 = 0 };
++	uint8_t temp;
++	int ndx = 0;
++	int start = 0;
++	int end = 0;
++	int sort_done = 0;
++	int i = 0;
++	volatile uint32_t *addr = &dev_global_regs->dtknqr1;
++
++
++	DWC_DEBUGPL(DBG_PCD,"dev_token_q_depth=%d\n",TOKEN_Q_DEPTH);
++
++	/* Read the DTKNQ Registers */
++	for (i = 0; i < DTKNQ_REG_CNT; i++) {
++		in_tkn_epnums[i] = DWC_READ_REG32(addr);
++		DWC_DEBUGPL(DBG_PCDV, "DTKNQR%d=0x%08x\n", i + 1,
++			    in_tkn_epnums[i]);
++		if (addr == &dev_global_regs->dvbusdis) {
++			addr = &dev_global_regs->dtknqr3_dthrctl;
++		} else {
++			++addr;
++		}
++
++	}
++
++	/* Copy the DTKNQR1 data to the bit field. */
++	dtknqr1.d32 = in_tkn_epnums[0];
++	if (dtknqr1.b.wrap_bit) {
++		ndx = dtknqr1.b.intknwptr;
++		end = ndx -1;
++		if (end < 0)
++			end = TOKEN_Q_DEPTH -1;
++	} else {
++		ndx = 0;
++		end = dtknqr1.b.intknwptr -1;
++		if (end < 0)
++			end = 0;
++	}
++	start = ndx;
++
++	/* Fill seqnum[] by initial values: EP number + 31 */
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		seqnum[i] = i +31;
++	}
++
++	/* Fill intkn_seq[] from in_tkn_epnums[0] */
++	for (i=0; i < 6; i++)
++		intkn_seq[i] = (in_tkn_epnums[0] >> ((7-i) * 4)) & 0xf;
++
++	if (TOKEN_Q_DEPTH > 6) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=6; i < 14; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[1] >> ((7 - (i - 6)) * 4)) & 0xf;
++	}
++
++	if (TOKEN_Q_DEPTH > 14) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=14; i < 22; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[2] >> ((7 - (i - 14)) * 4)) & 0xf;
++	}
++
++	if (TOKEN_Q_DEPTH > 22) {
++		/* Fill intkn_seq[] from in_tkn_epnums[1] */
++		for (i=22; i < 30; i++)
++			intkn_seq[i] =
++			    (in_tkn_epnums[3] >> ((7 - (i - 22)) * 4)) & 0xf;
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "%s start=%d end=%d intkn_seq[]:\n", __func__,
++		    start, end);
++	for (i=0; i<TOKEN_Q_DEPTH; i++)
++		DWC_DEBUGPL(DBG_PCDV,"%d\n", intkn_seq[i]);
++
++	/* Update seqnum based on intkn_seq[] */
++	i = 0;
++	do {
++		seqnum[intkn_seq[ndx]] = i;
++		ndx++;
++		i++;
++		if (ndx == TOKEN_Q_DEPTH)
++			ndx = 0;
++	} while ( i < TOKEN_Q_DEPTH );
++
++	/* Mark non active EP's in seqnum[] by 0xff */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		if (core_if->nextep_seq[i] == 0xff )
++			seqnum[i] = 0xff;
++	}
++
++	/* Sort seqnum[] */
++	sort_done = 0;
++	while (!sort_done) {
++		sort_done = 1;
++		for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++			if (seqnum[i] > seqnum[i+1]) {
++				temp = seqnum[i];
++				seqnum[i] = seqnum[i+1];
++				seqnum[i+1] = temp;
++				sort_done = 0;
++			}
++		}
++	}
++
++	ndx = start + seqnum[0];
++	if (ndx >= TOKEN_Q_DEPTH)
++		ndx = ndx % TOKEN_Q_DEPTH;
++	core_if->first_in_nextep_seq = intkn_seq[ndx];
++
++	/* Update seqnum[] by EP numbers  */
++	for (i=0; i<=core_if->dev_if->num_in_eps; i++) {
++		ndx = start + i;
++		if (seqnum[i] < 31) {
++			ndx = start + seqnum[i];
++			if (ndx >= TOKEN_Q_DEPTH)
++				ndx = ndx % TOKEN_Q_DEPTH;
++			seqnum[i] = intkn_seq[ndx];
++		} else {
++			if (seqnum[i] < 0xff) {
++				seqnum[i] = seqnum[i] - 31;
++			} else {
++				break;
++			}
++		}
++	}
++
++	/* Update nextep_seq[] based on seqnum[] */
++	for (i=0; i<core_if->dev_if->num_in_eps; i++) {
++		if (seqnum[i] != 0xff) {
++			if (seqnum[i+1] != 0xff) {
++				core_if->nextep_seq[seqnum[i]] = seqnum[i+1];
++			} else {
++				core_if->nextep_seq[seqnum[i]] = core_if->first_in_nextep_seq;
++				break;
++			}
++		} else {
++			break;
++		}
++	}
++
++	DWC_DEBUGPL(DBG_PCDV, "%s first_in_nextep_seq= %2d; nextep_seq[]:\n",
++		__func__, core_if->first_in_nextep_seq);
++	for (i=0; i <= core_if->dev_if->num_in_eps; i++) {
++		DWC_DEBUGPL(DBG_PCDV,"%2d\n", core_if->nextep_seq[i]);
++	}
++
++	/* Flush the Learning Queue */
++	resetctl.d32 = DWC_READ_REG32(&core_if->core_global_regs->grstctl);
++	resetctl.b.intknqflsh = 1;
++	DWC_WRITE_REG32(&core_if->core_global_regs->grstctl, resetctl.d32);
++
++
++}
++
++/**
++ * handle the IN EP disable interrupt.
++ */
++static inline void handle_in_ep_disable_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t gintmsk_data;
++	depctl_data_t depctl;
++	uint32_t diepdma;
++	uint32_t remain_to_transfer = 0;
++	uint8_t i;
++	uint32_t xfer_size;
++
++	ep = get_in_ep(pcd, epnum);
++	dwc_ep = &ep->dwc_ep;
++
++	if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++		dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++		complete_ep(ep);
++		return;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "diepctl%d=%0x\n", epnum,
++		    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl));
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->dieptsiz);
++	depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++
++	if ((core_if->start_predict == 0) || (depctl.b.eptype & 1)) {
++		if (ep->stopped) {
++			if (core_if->en_multiple_tx_fifo)
++				/* Flush the Tx FIFO */
++				dwc_otg_flush_tx_fifo(core_if, dwc_ep->tx_fifo_num);
++			/* Clear the Global IN NP NAK */
++			dctl.d32 = 0;
++			dctl.b.cgnpinnak = 1;
++			DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++		} else {
++			/* Restart the transaction */
++			if (dieptsiz.b.pktcnt != 0 || dieptsiz.b.xfersize != 0) {
++				restart_transfer(pcd, epnum);
++			}
++			DWC_DEBUGPL(DBG_ANY, "STOPPED!!!\n");
++		}
++		return;
++	}
++
++	if (core_if->start_predict > 2) {	// NP IN EP
++		core_if->start_predict--;
++		return;
++	}
++
++	core_if->start_predict--;
++
++	if (core_if->start_predict == 1) {	// All NP IN Ep's disabled now
++
++		predict_nextep_seq(core_if);
++
++		/* Update all active IN EP's NextEP field based of nextep_seq[] */
++		for ( i = 0; i <= core_if->dev_if->num_in_eps; i++) {
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (core_if->nextep_seq[i] != 0xff) {	// Active NP IN EP
++				depctl.b.nextep = core_if->nextep_seq[i];
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++		}
++		/* Flush Shared NP TxFIFO */
++		dwc_otg_flush_tx_fifo(core_if, 0);
++		/* Rewind buffers */
++		if (!core_if->dma_desc_enable) {
++			i = core_if->first_in_nextep_seq;
++			do {
++				ep = get_in_ep(pcd, i);
++				dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++				xfer_size = ep->dwc_ep.total_len - ep->dwc_ep.xfer_count;
++				if (xfer_size > ep->dwc_ep.maxxfer)
++					xfer_size = ep->dwc_ep.maxxfer;
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				if (dieptsiz.b.pktcnt != 0) {
++					if (xfer_size == 0) {
++						remain_to_transfer = 0;
++					} else {
++						if ((xfer_size % ep->dwc_ep.maxpacket) == 0) {
++							remain_to_transfer =
++								dieptsiz.b.pktcnt * ep->dwc_ep.maxpacket;
++						} else {
++							remain_to_transfer = ((dieptsiz.b.pktcnt -1) * ep->dwc_ep.maxpacket)
++								+ (xfer_size % ep->dwc_ep.maxpacket);
++						}
++					}
++					diepdma = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepdma);
++					dieptsiz.b.xfersize = remain_to_transfer;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->dieptsiz, dieptsiz.d32);
++					diepdma = ep->dwc_ep.dma_addr + (xfer_size - remain_to_transfer);
++					DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepdma, diepdma);
++				}
++				i = core_if->nextep_seq[i];
++			} while (i != core_if->first_in_nextep_seq);
++		} else { // dma_desc_enable
++				DWC_PRINTF("%s Learning Queue not supported in DDMA\n", __func__);
++		}
++
++		/* Restart transfers in predicted sequences */
++		i = core_if->first_in_nextep_seq;
++		do {
++			dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++			if (dieptsiz.b.pktcnt != 0) {
++				depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.epena = 1;
++				depctl.b.cnak = 1;
++				DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32);
++			}
++			i = core_if->nextep_seq[i];
++		} while (i != core_if->first_in_nextep_seq);
++
++		/* Clear the global non-periodic IN NAK handshake */
++		dctl.d32 = 0;
++		dctl.b.cgnpinnak = 1;
++		DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++		/* Unmask EP Mismatch interrupt */
++		gintmsk_data.d32 = 0;
++		gintmsk_data.b.epmismatch = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, gintmsk_data.d32);
++
++		core_if->start_predict = 0;
++
++	}
++}
++
++/**
++ * Handler for the IN EP timeout handshake interrupt.
++ */
++static inline void handle_in_ep_timeout_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++
++#ifdef DEBUG
++	deptsiz_data_t dieptsiz = {.d32 = 0 };
++	uint32_t num = 0;
++#endif
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_otg_pcd_ep_t *ep;
++
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	ep = get_in_ep(pcd, epnum);
++
++	/* Disable the NP Tx Fifo Empty Interrrupt */
++	if (!core_if->dma_enable) {
++		intr_mask.b.nptxfempty = 1;
++		DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++				 intr_mask.d32, 0);
++	}
++	/** @todo NGS Check EP type.
++	 * Implement for Periodic EPs */
++	/*
++	 * Non-periodic EP
++	 */
++	/* Enable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk, 0, intr_mask.d32);
++
++	/* Set Global IN NAK */
++	dctl.b.sgnpinnak = 1;
++	DWC_MODIFY_REG32(&dev_if->dev_global_regs->dctl, dctl.d32, dctl.d32);
++
++	ep->stopped = 1;
++
++#ifdef DEBUG
++	dieptsiz.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[num]->dieptsiz);
++	DWC_DEBUGPL(DBG_ANY, "pktcnt=%d size=%d\n",
++		    dieptsiz.b.pktcnt, dieptsiz.b.xfersize);
++#endif
++
++#ifdef DISABLE_PERIODIC_EP
++	/*
++	 * Set the NAK bit for this EP to
++	 * start the disable process.
++	 */
++	diepctl.d32 = 0;
++	diepctl.b.snak = 1;
++	DWC_MODIFY_REG32(&dev_if->in_ep_regs[num]->diepctl, diepctl.d32,
++			 diepctl.d32);
++	ep->disabling = 1;
++	ep->stopped = 1;
++#endif
++}
++
++/**
++ * Handler for the IN EP NAK interrupt.
++ */
++static inline int32_t handle_in_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					    const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	diepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "IN EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 diepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->diepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP Babble interrupt.
++ */
++static inline int32_t handle_out_ep_babble_intr(dwc_otg_pcd_t * pcd,
++						const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++		   "OUT EP Babble");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.babble = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NAK interrupt.
++ */
++static inline int32_t handle_out_ep_nak_intr(dwc_otg_pcd_t * pcd,
++					     const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_ANY, "INTERRUPT Handler not implemented for %s\n", "OUT EP NAK");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nak = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * Handler for the OUT EP NYET interrupt.
++ */
++static inline int32_t handle_out_ep_nyet_intr(dwc_otg_pcd_t * pcd,
++					      const uint32_t epnum)
++{
++	/** @todo implement ISR */
++	dwc_otg_core_if_t *core_if;
++	doepmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_PRINTF("INTERRUPT Handler not implemented for %s\n", "OUT EP NYET");
++	core_if = GET_CORE_IF(pcd);
++	intr_mask.b.nyet = 1;
++
++	if (core_if->multiproc_int_enable) {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->
++				 doepeachintmsk[epnum], intr_mask.d32, 0);
++	} else {
++		DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++				 intr_mask.d32, 0);
++	}
++
++	return 1;
++}
++
++/**
++ * This interrupt indicates that an IN EP has a pending Interrupt.
++ * The sequence for handling the IN EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each IN EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DIEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Time-out Handshake" log error
++ * -#	If "IN Token Received when TxFIFO Empty" write packet to Tx
++ *		FIFO.
++ * -#	If "IN Token EP Mismatch" (disable, this is handled by EP
++ *		Mismatch Interrupt)
++ */
++static int32_t dwc_otg_pcd_handle_in_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_IN_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		diepint_data_t diepint = {.d32=0}; \
++		diepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->in_ep_regs[__epnum]->diepint, \
++		diepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	dwc_otg_dev_if_t *dev_if = core_if->dev_if;
++	diepint_data_t diepint = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	uint32_t ep_intr;
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, pcd);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_in_ep_intr(core_if);
++
++	/* Service the Device IN interrupts for each endpoint */
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			uint32_t empty_msk;
++			/* Get EP pointer */
++			ep = get_in_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++			empty_msk =
++			    DWC_READ_REG32(&dev_if->
++					   dev_global_regs->dtknqr4_fifoemptymsk);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "IN EP INTERRUPT - %d\nepmty_msk - %8x  diepctl - %8x\n",
++				    epnum, empty_msk, depctl.d32);
++
++			DWC_DEBUGPL(DBG_PCD,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++
++			diepint.d32 =
++			    dwc_otg_read_dev_in_ep_intr(core_if, dwc_ep);
++
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP %d Interrupt Register - 0x%x\n", epnum,
++				    diepint.d32);
++			/* Transfer complete */
++			if (diepint.b.xfercompl) {
++				/* Disable the NP Tx FIFO Empty
++				 * Interrupt */
++				if (core_if->en_multiple_tx_fifo == 0) {
++					intr_mask.b.nptxfempty = 1;
++					DWC_MODIFY_REG32
++					    (&core_if->core_global_regs->gintmsk,
++					     intr_mask.d32, 0);
++				} else {
++					/* Disable the Tx FIFO Empty Interrupt for this EP */
++					uint32_t fifoemptymsk =
++					    0x1 << dwc_ep->num;
++					DWC_MODIFY_REG32(&core_if->
++							 dev_if->dev_global_regs->dtknqr4_fifoemptymsk,
++							 fifoemptymsk, 0);
++				}
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, xfercompl);
++
++				/* Complete the transfer */
++				if (epnum == 0) {
++					handle_ep0(pcd);
++				}
++#ifdef DWC_EN_ISOC
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_iso_ep(pcd, ep);
++				}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++				}
++#endif /* DWC_UTE_PER_IO */
++				else {
++					if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC &&
++							dwc_ep->bInterval > 1) {
++						dwc_ep->frame_num += dwc_ep->bInterval;
++						if (dwc_ep->frame_num > 0x3FFF)
++						{
++							dwc_ep->frm_overrun = 1;
++							dwc_ep->frame_num &= 0x3FFF;
++						} else
++							dwc_ep->frm_overrun = 0;
++					}
++					complete_ep(ep);
++					if(diepint.b.nak)
++						CLEAR_IN_EP_INTR(core_if, epnum, nak);
++				}
++			}
++			/* Endpoint disable      */
++			if (diepint.b.epdisabled) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN disabled\n",
++					    epnum);
++				handle_in_ep_disable_intr(pcd, epnum);
++
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, epdisabled);
++			}
++			/* AHB Error */
++			if (diepint.b.ahberr) {
++				DWC_ERROR("EP%d IN AHB Error\n", epnum);
++				/* Clear the bit in DIEPINTn for this interrupt */
++				CLEAR_IN_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* TimeOUT Handshake (non-ISOC IN EPs) */
++			if (diepint.b.timeout) {
++				DWC_ERROR("EP%d IN Time-out\n", epnum);
++				handle_in_ep_timeout_intr(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, timeout);
++			}
++			/** IN Token received with TxF Empty */
++			if (diepint.b.intktxfemp) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN TxFifo Empty\n",
++					    epnum);
++				if (!ep->stopped && epnum != 0) {
++
++					diepmsk_data_t diepmsk = {.d32 = 0 };
++					diepmsk.b.intktxfemp = 1;
++
++					if (core_if->multiproc_int_enable) {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepeachintmsk
++						     [epnum], diepmsk.d32, 0);
++					} else {
++						DWC_MODIFY_REG32
++						    (&dev_if->dev_global_regs->diepmsk,
++						     diepmsk.d32, 0);
++					}
++				} else if (core_if->dma_desc_enable
++					   && epnum == 0
++					   && pcd->ep0state ==
++					   EP0_OUT_STATUS_PHASE) {
++					// EP0 IN set STALL
++					depctl.d32 =
++					    DWC_READ_REG32(&dev_if->in_ep_regs
++							   [epnum]->diepctl);
++
++					/* set the disable and stall bits */
++					if (depctl.b.epena) {
++						depctl.b.epdis = 1;
++					}
++					depctl.b.stall = 1;
++					DWC_WRITE_REG32(&dev_if->in_ep_regs
++							[epnum]->diepctl,
++							depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, intktxfemp);
++			}
++			/** IN Token Received with EP mismatch */
++			if (diepint.b.intknepmis) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN TKN EP Mismatch\n", epnum);
++				CLEAR_IN_EP_INTR(core_if, epnum, intknepmis);
++			}
++			/** IN Endpoint NAK Effective */
++			if (diepint.b.inepnakeff) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d IN EP NAK Effective\n",
++					    epnum);
++				/* Periodic EP */
++				if (ep->disabling) {
++					depctl.d32 = 0;
++					depctl.b.snak = 1;
++					depctl.b.epdis = 1;
++					DWC_MODIFY_REG32(&dev_if->in_ep_regs
++							 [epnum]->diepctl,
++							 depctl.d32,
++							 depctl.d32);
++				}
++				CLEAR_IN_EP_INTR(core_if, epnum, inepnakeff);
++
++			}
++
++			/** IN EP Tx FIFO Empty Intr */
++			if (diepint.b.emptyintr) {
++				DWC_DEBUGPL(DBG_ANY,
++					    "EP%d Tx FIFO Empty Intr \n",
++					    epnum);
++				write_empty_tx_fifo(pcd, epnum);
++
++				CLEAR_IN_EP_INTR(core_if, epnum, emptyintr);
++
++			}
++
++			/** IN EP BNA Intr */
++			if (diepint.b.bna) {
++				CLEAR_IN_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* NAK Interrutp */
++			if (diepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d IN NAK Interrupt\n",
++					    epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					depctl_data_t depctl;
++					if (ep->dwc_ep.frame_num == 0xFFFFFFFF) {
++						ep->dwc_ep.frame_num = core_if->frame_num;
++						if (ep->dwc_ep.bInterval > 1) {
++							depctl.d32 = 0;
++							depctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[epnum]->diepctl);
++							if (ep->dwc_ep.frame_num & 0x1) {
++								depctl.b.setd1pid = 1;
++								depctl.b.setd0pid = 0;
++							} else {
++								depctl.b.setd0pid = 1;
++								depctl.b.setd1pid = 0;
++							}
++							DWC_WRITE_REG32(&dev_if->in_ep_regs[epnum]->diepctl, depctl.d32);
++						}
++						start_next_request(ep);
++					}
++					ep->dwc_ep.frame_num += ep->dwc_ep.bInterval;
++					if (dwc_ep->frame_num > 0x3FFF)	{
++						dwc_ep->frm_overrun = 1;
++						dwc_ep->frame_num &= 0x3FFF;
++					} else
++						dwc_ep->frm_overrun = 0;
++				}
++
++				CLEAR_IN_EP_INTR(core_if, epnum, nak);
++			}
++		}
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++#undef CLEAR_IN_EP_INTR
++}
++
++/**
++ * This interrupt indicates that an OUT EP has a pending Interrupt.
++ * The sequence for handling the OUT EP interrupt is shown below:
++ * -#	Read the Device All Endpoint Interrupt register
++ * -#	Repeat the following for each OUT EP interrupt bit set (from
++ *		LSB to MSB).
++ * -#	Read the Device Endpoint Interrupt (DOEPINTn) register
++ * -#	If "Transfer Complete" call the request complete function
++ * -#	If "Endpoint Disabled" complete the EP disable procedure.
++ * -#	If "AHB Error Interrupt" log error
++ * -#	If "Setup Phase Done" process Setup Packet (See Standard USB
++ *		Command Processing)
++ */
++static int32_t dwc_otg_pcd_handle_out_ep_intr(dwc_otg_pcd_t * pcd)
++{
++#define CLEAR_OUT_EP_INTR(__core_if,__epnum,__intr) \
++do { \
++		doepint_data_t doepint = {.d32=0}; \
++		doepint.b.__intr = 1; \
++		DWC_WRITE_REG32(&__core_if->dev_if->out_ep_regs[__epnum]->doepint, \
++		doepint.d32); \
++} while (0)
++
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	uint32_t ep_intr;
++	doepint_data_t doepint = {.d32 = 0 };
++	uint32_t epnum = 0;
++	dwc_otg_pcd_ep_t *ep;
++	dwc_ep_t *dwc_ep;
++	dctl_data_t dctl = {.d32 = 0 };
++	gintmsk_data_t gintmsk = {.d32 = 0 };
++
++
++	DWC_DEBUGPL(DBG_PCDV, "%s()\n", __func__);
++
++	/* Read in the device interrupt bits */
++	ep_intr = dwc_otg_read_dev_all_out_ep_intr(core_if);
++
++	while (ep_intr) {
++		if (ep_intr & 0x1) {
++			/* Get EP pointer */
++			ep = get_out_ep(pcd, epnum);
++			dwc_ep = &ep->dwc_ep;
++
++#ifdef VERBOSE
++			DWC_DEBUGPL(DBG_PCDV,
++				    "EP%d-%s: type=%d, mps=%d\n",
++				    dwc_ep->num, (dwc_ep->is_in ? "IN" : "OUT"),
++				    dwc_ep->type, dwc_ep->maxpacket);
++#endif
++			doepint.d32 =
++			    dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep);
++			/* Moved this interrupt upper due to core deffect of asserting
++			 * OUT EP 0 xfercompl along with stsphsrcvd in BDMA */
++			if (doepint.b.stsphsercvd) {
++				deptsiz0_data_t deptsiz;
++				CLEAR_OUT_EP_INTR(core_if, epnum, stsphsercvd);
++				deptsiz.d32 =
++				    DWC_READ_REG32(&core_if->dev_if->
++						   out_ep_regs[0]->doeptsiz);
++				if (core_if->snpsid >= OTG_CORE_REV_3_00a
++				    && core_if->dma_enable
++				    && core_if->dma_desc_enable == 0
++				    && doepint.b.xfercompl
++				    && deptsiz.b.xfersize == 24) {
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++					doepint.b.xfercompl = 0;
++					ep0_out_start(core_if, pcd);
++				}
++				if ((core_if->dma_desc_enable) ||
++				    (core_if->dma_enable
++				     && core_if->snpsid >=
++				     OTG_CORE_REV_3_00a)) {
++					do_setup_in_status_phase(pcd);
++				}
++			}
++			/* Transfer complete */
++			if (doepint.b.xfercompl) {
++
++				if (epnum == 0) {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (core_if->snpsid >= OTG_CORE_REV_3_00a) {
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepint),
++							doepint.d32);
++						DWC_DEBUGPL(DBG_PCDV, "DOEPCTL=%x \n",
++							DWC_READ_REG32(&core_if->dev_if->out_ep_regs[0]->doepctl));
++
++						if (core_if->snpsid >= OTG_CORE_REV_3_00a
++							&& core_if->dma_enable == 0) {
++							doepint_data_t doepint;
++							doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++														out_ep_regs[0]->doepint);
++							if (pcd->ep0state == EP0_IDLE && doepint.b.sr) {
++								CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								goto exit_xfercompl;
++							}
++						}
++						/* In case of DDMA  look at SR bit to go to the Data Stage */
++						if (core_if->dma_desc_enable) {
++							dev_dma_desc_sts_t status = {.d32 = 0};
++							if (pcd->ep0state == EP0_IDLE) {
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++											dev_if->setup_desc_index]->status.d32;
++								if(pcd->data_terminated) {
++									 pcd->data_terminated = 0;
++									 status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++									 dwc_memcpy(&pcd->setup_pkt->req, pcd->backup_buf, 8);
++								}
++								if (status.b.sr) {
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "DMA DESC EP0_IDLE SR=1 setup=1\n");
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								dev_dma_desc_sts_t status = {.d32 = 0};
++								diepint_data_t diepint0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															in_ep_regs[0]->diepint);
++
++								if (pcd->ep0state == EP0_STALL || pcd->ep0state == EP0_DISCONNECT) {
++									DWC_ERROR("EP0 is stalled/disconnected\n");
++								}
++
++								/* Clear IN xfercompl if set */
++								if (diepint0.b.xfercompl && (pcd->ep0state == EP0_IN_STATUS_PHASE
++									|| pcd->ep0state == EP0_IN_DATA_PHASE)) {
++									DWC_WRITE_REG32(&core_if->dev_if->
++										in_ep_regs[0]->diepint, diepint0.d32);
++								}
++
++								status.d32 = core_if->dev_if->setup_desc_addr[core_if->
++									dev_if->setup_desc_index]->status.d32;
++
++								if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len
++									&& (pcd->ep0state == EP0_OUT_DATA_PHASE))
++									status.d32 = core_if->dev_if->out_desc_addr->status.d32;
++								if (pcd->ep0state == EP0_OUT_STATUS_PHASE)
++									status.d32 = status.d32 = core_if->dev_if->
++									out_desc_addr->status.d32;
++
++								if (status.b.sr) {
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->snpsid >= OTG_CORE_REV_2_94a && core_if->dma_enable
++							&& core_if->dma_desc_enable == 0) {
++							doepint_data_t doepint_temp = {.d32 = 0};
++							deptsiz0_data_t doeptsize0 = {.d32 = 0 };
++							doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doepint);
++							doeptsize0.d32 = DWC_READ_REG32(&core_if->dev_if->
++															out_ep_regs[ep->dwc_ep.num]->doeptsiz);
++							if (pcd->ep0state == EP0_IDLE) {
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++								}
++									doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++									if (doeptsize0.b.supcnt == 3) {
++										DWC_DEBUGPL(DBG_ANY, "Rolling over!!!!!!!\n");
++										ep->dwc_ep.stp_rollover = 1;
++									}
++									if (doepint.b.setup) {
++retry:
++										/* Already started data stage, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										ep->dwc_ep.stp_rollover = 0;
++										/* Prepare for more setup packets */
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE ||
++											pcd->ep0state == EP0_IN_DATA_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_ANY,
++											"EP0_IDLE SR=1 setup=0 new setup comes\n");
++										doepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++																	out_ep_regs[0]->doepint);
++										if(doepint.b.setup)
++											goto retry;
++										ep0_out_start(core_if, pcd);
++									}
++							} else {
++								dwc_otg_pcd_request_t *req;
++								diepint_data_t diepint0 = {.d32 = 0};
++								doepint_data_t doepint_temp = {.d32 = 0};
++								depctl_data_t diepctl0;
++								diepint0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepint);
++								diepctl0.d32 = DWC_READ_REG32(&core_if->dev_if->
++																in_ep_regs[0]->diepctl);
++
++								if (pcd->ep0state == EP0_IN_DATA_PHASE
++									|| pcd->ep0state == EP0_IN_STATUS_PHASE) {
++									if (diepint0.b.xfercompl) {
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint0.d32);
++									}
++									if (diepctl0.b.epena) {
++										diepint_data_t diepint = {.d32 = 0};
++										diepctl0.b.snak = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++														in_ep_regs[0]->diepctl, diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.inepnakeff);
++										diepint.b.inepnakeff = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->
++											in_ep_regs[0]->diepint, diepint.d32);
++										diepctl0.d32 = 0;
++										diepctl0.b.epdis = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepctl,
++														diepctl0.d32);
++										do {
++											dwc_udelay(10);
++											diepint.d32 = DWC_READ_REG32(&core_if->dev_if->
++												in_ep_regs[0]->diepint);
++										} while (!diepint.b.epdisabled);
++										diepint.b.epdisabled = 1;
++										DWC_WRITE_REG32(&core_if->dev_if->in_ep_regs[0]->diepint,
++															diepint.d32);
++									}
++								}
++								doepint_temp.d32 = DWC_READ_REG32(&core_if->dev_if->
++																out_ep_regs[ep->dwc_ep.num]->doepint);
++								if (doepint_temp.b.sr) {
++									CLEAR_OUT_EP_INTR(core_if, epnum, sr);
++									if (DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++										DWC_DEBUGPL(DBG_PCDV, "Request queue empty!!\n");
++									} else {
++										DWC_DEBUGPL(DBG_PCDV, "complete req!!\n");
++										req = DWC_CIRCLEQ_FIRST(&ep->queue);
++										if (ep->dwc_ep.xfer_count != ep->dwc_ep.total_len &&
++											pcd->ep0state == EP0_OUT_DATA_PHASE) {
++												/* Read arrived setup packet from req->buf */
++												dwc_memcpy(&pcd->setup_pkt->req,
++													req->buf + ep->dwc_ep.xfer_count, 8);
++										}
++										req->actual = ep->dwc_ep.xfer_count;
++										dwc_otg_request_done(ep, req, -ECONNRESET);
++										ep->dwc_ep.start_xfer_buff = 0;
++										ep->dwc_ep.xfer_buff = 0;
++										ep->dwc_ep.xfer_len = 0;
++									}
++									pcd->ep0state = EP0_IDLE;
++									if (doepint.b.setup) {
++										DWC_DEBUGPL(DBG_PCDV, "EP0_IDLE SR=1 setup=1\n");
++										/* Data stage started, clear setup */
++										CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++										doepint.b.setup = 0;
++										handle_ep0(pcd);
++										/* Prepare for setup packets if ep0in was enabled*/
++										if (pcd->ep0state == EP0_IN_STATUS_PHASE) {
++											ep0_out_start(core_if, pcd);
++										}
++										goto exit_xfercompl;
++									} else {
++										/* Prepare for more setup packets */
++										DWC_DEBUGPL(DBG_PCDV,
++											"EP0_IDLE SR=1 setup=0 new setup comes 2\n");
++										ep0_out_start(core_if, pcd);
++									}
++								}
++							}
++						}
++						if (core_if->dma_enable == 0 || pcd->ep0state != EP0_IDLE)
++							handle_ep0(pcd);
++exit_xfercompl:
++						DWC_DEBUGPL(DBG_PCDV, "DOEPINT=%x doepint=%x\n",
++							dwc_otg_read_dev_out_ep_intr(core_if, dwc_ep), doepint.d32);
++					} else {
++					if (core_if->dma_desc_enable == 0
++					    || pcd->ep0state != EP0_IDLE)
++						handle_ep0(pcd);
++					}
++#ifdef DWC_EN_ISOC
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					if (doepint.b.pktdrpsts == 0) {
++						/* Clear the bit in DOEPINTn for this interrupt */
++						CLEAR_OUT_EP_INTR(core_if,
++								  epnum,
++								  xfercompl);
++						complete_iso_ep(pcd, ep);
++					} else {
++
++						doepint_data_t doepint = {.d32 = 0 };
++						doepint.b.xfercompl = 1;
++						doepint.b.pktdrpsts = 1;
++						DWC_WRITE_REG32
++						    (&core_if->dev_if->out_ep_regs
++						     [epnum]->doepint,
++						     doepint.d32);
++						if (handle_iso_out_pkt_dropped
++						    (core_if, dwc_ep)) {
++							complete_iso_ep(pcd,
++									ep);
++						}
++					}
++#endif /* DWC_EN_ISOC */
++#ifdef DWC_UTE_PER_IO
++				} else if (dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++					CLEAR_OUT_EP_INTR(core_if, epnum, xfercompl);
++					if (!ep->stopped)
++						complete_xiso_ep(ep);
++#endif /* DWC_UTE_PER_IO */
++				} else {
++					/* Clear the bit in DOEPINTn for this interrupt */
++					CLEAR_OUT_EP_INTR(core_if, epnum,
++							  xfercompl);
++
++					if (core_if->core_params->dev_out_nak) {
++						DWC_TIMER_CANCEL(pcd->core_if->ep_xfer_timer[epnum]);
++						pcd->core_if->ep_xfer_info[epnum].state = 0;
++#ifdef DEBUG
++						print_memory_payload(pcd, dwc_ep);
++#endif
++					}
++					complete_ep(ep);
++				}
++
++			}
++
++			/* Endpoint disable      */
++			if (doepint.b.epdisabled) {
++
++				/* Clear the bit in DOEPINTn for this interrupt */
++				CLEAR_OUT_EP_INTR(core_if, epnum, epdisabled);
++				if (core_if->core_params->dev_out_nak) {
++#ifdef DEBUG
++					print_memory_payload(pcd, dwc_ep);
++#endif
++					/* In case of timeout condition */
++					if (core_if->ep_xfer_info[epnum].state == 2) {
++						dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++										dev_global_regs->dctl);
++						dctl.b.cgoutnak = 1;
++						DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++																dctl.d32);
++						/* Unmask goutnakeff interrupt which was masked
++						 * during handle nak out interrupt */
++						gintmsk.b.goutnakeff = 1;
++						DWC_MODIFY_REG32(&core_if->core_global_regs->gintmsk,
++																0, gintmsk.d32);
++
++						complete_ep(ep);
++					}
++				}
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC)
++				{
++					dctl_data_t dctl;
++					gintmsk_data_t intr_mask = {.d32 = 0};
++					dwc_otg_pcd_request_t *req = 0;
++
++					dctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++						dev_global_regs->dctl);
++					dctl.b.cgoutnak = 1;
++					DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl,
++						dctl.d32);
++
++					intr_mask.d32 = 0;
++					intr_mask.b.incomplisoout = 1;
++
++					/* Get any pending requests */
++					if (!DWC_CIRCLEQ_EMPTY(&ep->queue)) {
++						req = DWC_CIRCLEQ_FIRST(&ep->queue);
++						if (!req) {
++							DWC_PRINTF("complete_ep 0x%p, req = NULL!\n", ep);
++						} else {
++							dwc_otg_request_done(ep, req, 0);
++							start_next_request(ep);
++						}
++					} else {
++						DWC_PRINTF("complete_ep 0x%p, ep->queue empty!\n", ep);
++					}
++				}
++			}
++			/* AHB Error */
++			if (doepint.b.ahberr) {
++				DWC_ERROR("EP%d OUT AHB Error\n", epnum);
++				DWC_ERROR("EP%d DEPDMA=0x%08x \n",
++					  epnum, core_if->dev_if->out_ep_regs[epnum]->doepdma);
++				CLEAR_OUT_EP_INTR(core_if, epnum, ahberr);
++			}
++			/* Setup Phase Done (contorl EPs) */
++			if (doepint.b.setup) {
++#ifdef DEBUG_EP0
++				DWC_DEBUGPL(DBG_PCD, "EP%d SETUP Done\n", epnum);
++#endif
++				CLEAR_OUT_EP_INTR(core_if, epnum, setup);
++
++				handle_ep0(pcd);
++			}
++
++			/** OUT EP BNA Intr */
++			if (doepint.b.bna) {
++				CLEAR_OUT_EP_INTR(core_if, epnum, bna);
++				if (core_if->dma_desc_enable) {
++#ifdef DWC_EN_ISOC
++					if (dwc_ep->type ==
++					    DWC_OTG_EP_TYPE_ISOC) {
++						/*
++						 * This checking is performed to prevent first "false" BNA
++						 * handling occuring right after reconnect
++						 */
++						if (dwc_ep->next_frame !=
++						    0xffffffff)
++							dwc_otg_pcd_handle_iso_bna(ep);
++					} else
++#endif				/* DWC_EN_ISOC */
++					{
++						dwc_otg_pcd_handle_noniso_bna(ep);
++					}
++				}
++			}
++			/* Babble Interrupt */
++			if (doepint.b.babble) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Babble\n",
++					    epnum);
++				handle_out_ep_babble_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, babble);
++			}
++			if (doepint.b.outtknepdis) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT Token received when EP is \
++					disabled\n",epnum);
++				if (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++					doepmsk_data_t doepmsk = {.d32 = 0};
++					ep->dwc_ep.frame_num = core_if->frame_num;
++					if (ep->dwc_ep.bInterval > 1) {
++						depctl_data_t depctl;
++						depctl.d32 = DWC_READ_REG32(&core_if->dev_if->
++													out_ep_regs[epnum]->doepctl);
++						if (ep->dwc_ep.frame_num & 0x1) {
++							depctl.b.setd1pid = 1;
++							depctl.b.setd0pid = 0;
++						} else {
++							depctl.b.setd0pid = 1;
++							depctl.b.setd1pid = 0;
++						}
++						DWC_WRITE_REG32(&core_if->dev_if->
++										out_ep_regs[epnum]->doepctl, depctl.d32);
++					}
++					start_next_request(ep);
++					doepmsk.b.outtknepdis = 1;
++					DWC_MODIFY_REG32(&core_if->dev_if->dev_global_regs->doepmsk,
++								 doepmsk.d32, 0);
++				}
++				CLEAR_OUT_EP_INTR(core_if, epnum, outtknepdis);
++			}
++
++			/* NAK Interrutp */
++			if (doepint.b.nak) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NAK\n", epnum);
++				handle_out_ep_nak_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nak);
++			}
++			/* NYET Interrutp */
++			if (doepint.b.nyet) {
++				DWC_DEBUGPL(DBG_ANY, "EP%d OUT NYET\n", epnum);
++				handle_out_ep_nyet_intr(pcd, epnum);
++
++				CLEAR_OUT_EP_INTR(core_if, epnum, nyet);
++			}
++		}
++
++		epnum++;
++		ep_intr >>= 1;
++	}
++
++	return 1;
++
++#undef CLEAR_OUT_EP_INTR
++}
++static int drop_transfer(uint32_t trgt_fr, uint32_t curr_fr, uint8_t frm_overrun)
++{
++	int retval = 0;
++	if(!frm_overrun && curr_fr >= trgt_fr)
++		retval = 1;
++	else if (frm_overrun
++		 && (curr_fr >= trgt_fr && ((curr_fr - trgt_fr) < 0x3FFF / 2)))
++		retval = 1;
++	return retval;
++}
++/**
++ * Incomplete ISO IN Transfer Interrupt.
++ * This interrupt indicates one of the following conditions occurred
++ * while transmitting an ISOC transaction.
++ * - Corrupted IN Token for ISOC EP.
++ * - Packet not complete in FIFO.
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Disable EP; when "Endpoint Disabled" interrupt is received
++ *		Flush FIFO
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_in_intr(dwc_otg_pcd_t * pcd)
++{
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (dwc_ep->active && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->dieptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd), dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++
++#else
++	depctl_data_t depctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	dwc_otg_dev_if_t *dev_if;
++	int i;
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	DWC_DEBUGPL(DBG_PCD,"Incomplete ISO IN \n");
++
++	for (i = 1; i <= dev_if->num_in_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i-1].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (depctl.b.epena && dwc_ep->type == DWC_OTG_EP_TYPE_ISOC) {
++			if (drop_transfer(dwc_ep->frame_num, GET_CORE_IF(pcd)->frame_num,
++							dwc_ep->frm_overrun))
++			{
++				depctl.d32 =
++					DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++				depctl.b.snak = 1;
++				depctl.b.epdis = 1;
++				DWC_MODIFY_REG32(&dev_if->in_ep_regs[i]->diepctl, depctl.d32, depctl.d32);
++			}
++		}
++	}
++
++	/*intr_mask.b.incomplisoin = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);	 */
++#endif				//DWC_EN_ISOC
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoin = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * Incomplete ISO OUT Transfer Interrupt.
++ *
++ * This interrupt indicates that the core has dropped an ISO OUT
++ * packet. The following conditions can be the cause:
++ * - FIFO Full, the entire packet would not fit in the FIFO.
++ * - CRC Error
++ * - Corrupted Token
++ * The follow actions will be taken:
++ *	-#	Determine the EP
++ *	-#	Set incomplete flag in dwc_ep structure
++ *	-#	Read any data from the FIFO
++ *	-#	Disable EP. When "Endpoint Disabled" interrupt is received
++ *		re-enable EP.
++ */
++int32_t dwc_otg_pcd_handle_incomplete_isoc_out_intr(dwc_otg_pcd_t * pcd)
++{
++
++	gintsts_data_t gintsts;
++
++#ifdef DWC_EN_ISOC
++	dwc_otg_dev_if_t *dev_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dsts_data_t dsts = {.d32 = 0 };
++	dwc_ep_t *dwc_ep;
++	int i;
++
++	dev_if = GET_CORE_IF(pcd)->dev_if;
++
++	for (i = 1; i <= dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->in_ep[i].dwc_ep;
++		if (pcd->out_ep[i].dwc_ep.active &&
++		    pcd->out_ep[i].dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) {
++			deptsiz.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doeptsiz);
++			depctl.d32 =
++			    DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++
++			if (depctl.b.epdis && deptsiz.d32) {
++				set_current_pkt_info(GET_CORE_IF(pcd),
++						     &pcd->out_ep[i].dwc_ep);
++				if (dwc_ep->cur_pkt >= dwc_ep->pkt_cnt) {
++					dwc_ep->cur_pkt = 0;
++					dwc_ep->proc_buf_num =
++					    (dwc_ep->proc_buf_num ^ 1) & 0x1;
++
++					if (dwc_ep->proc_buf_num) {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff1;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr1;
++					} else {
++						dwc_ep->cur_pkt_addr =
++						    dwc_ep->xfer_buff0;
++						dwc_ep->cur_pkt_dma_addr =
++						    dwc_ep->dma_addr0;
++					}
++
++				}
++
++				dsts.d32 =
++				    DWC_READ_REG32(&GET_CORE_IF(pcd)->dev_if->
++						   dev_global_regs->dsts);
++				dwc_ep->next_frame = dsts.b.soffn;
++
++				dwc_otg_iso_ep_start_frm_transfer(GET_CORE_IF
++								  (pcd),
++								  dwc_ep);
++			}
++		}
++	}
++#else
++	/** @todo implement ISR */
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	dwc_otg_core_if_t *core_if;
++	deptsiz_data_t deptsiz = {.d32 = 0 };
++	depctl_data_t depctl = {.d32 = 0 };
++	dctl_data_t dctl = {.d32 = 0 };
++	dwc_ep_t *dwc_ep = NULL;
++	int i;
++	core_if = GET_CORE_IF(pcd);
++
++	for (i = 0; i < core_if->dev_if->num_out_eps; ++i) {
++		dwc_ep = &pcd->out_ep[i].dwc_ep;
++		depctl.d32 =
++			DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++		if (depctl.b.epena && depctl.b.dpid == (core_if->frame_num & 0x1)) {
++			core_if->dev_if->isoc_ep = dwc_ep;
++			deptsiz.d32 =
++					DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doeptsiz);
++				break;
++		}
++	}
++	dctl.d32 = DWC_READ_REG32(&core_if->dev_if->dev_global_regs->dctl);
++	gintsts.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintsts);
++	intr_mask.d32 = DWC_READ_REG32(&core_if->core_global_regs->gintmsk);
++
++	if (!intr_mask.b.goutnakeff) {
++		/* Unmask it */
++		intr_mask.b.goutnakeff = 1;
++		DWC_WRITE_REG32(&core_if->core_global_regs->gintmsk, intr_mask.d32);
++	}
++	if (!gintsts.b.goutnakeff) {
++		dctl.b.sgoutnak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->dev_global_regs->dctl, dctl.d32);
++
++	depctl.d32 = DWC_READ_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl);
++	if (depctl.b.epena) {
++		depctl.b.epdis = 1;
++		depctl.b.snak = 1;
++	}
++	DWC_WRITE_REG32(&core_if->dev_if->out_ep_regs[dwc_ep->num]->doepctl, depctl.d32);
++
++	intr_mask.d32 = 0;
++	intr_mask.b.incomplisoout = 1;
++
++#endif /* DWC_EN_ISOC */
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.incomplisoout = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * This function handles the Global IN NAK Effective interrupt.
++ *
++ */
++int32_t dwc_otg_pcd_handle_in_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	depctl_data_t diepctl = {.d32 = 0 };
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++	int i;
++
++	DWC_DEBUGPL(DBG_PCD, "Global IN NAK Effective\n");
++
++	/* Disable all active IN EPs */
++	for (i = 0; i <= dev_if->num_in_eps; i++) {
++		diepctl.d32 = DWC_READ_REG32(&dev_if->in_ep_regs[i]->diepctl);
++		if (!(diepctl.b.eptype & 1) && diepctl.b.epena) {
++			if (core_if->start_predict > 0)
++				core_if->start_predict++;
++			diepctl.b.epdis = 1;
++			diepctl.b.snak = 1;
++			DWC_WRITE_REG32(&dev_if->in_ep_regs[i]->diepctl, diepctl.d32);
++		}
++	}
++
++
++	/* Disable the Global IN NAK Effective Interrupt */
++	intr_mask.b.ginnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++			 intr_mask.d32, 0);
++
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.ginnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * OUT NAK Effective.
++ *
++ */
++int32_t dwc_otg_pcd_handle_out_nak_effective(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_dev_if_t *dev_if = GET_CORE_IF(pcd)->dev_if;
++	gintmsk_data_t intr_mask = {.d32 = 0 };
++	gintsts_data_t gintsts;
++	depctl_data_t doepctl;
++	int i;
++
++	/* Disable the Global OUT NAK Effective Interrupt */
++	intr_mask.b.goutnakeff = 1;
++	DWC_MODIFY_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintmsk,
++		intr_mask.d32, 0);
++
++	/* If DEV OUT NAK enabled*/
++	if (pcd->core_if->core_params->dev_out_nak) {
++		/* Run over all out endpoints to determine the ep number on
++		 * which the timeout has happened
++		 */
++		for (i = 0; i <= dev_if->num_out_eps; i++) {
++			if ( pcd->core_if->ep_xfer_info[i].state == 2 )
++				break;
++		}
++		if (i > dev_if->num_out_eps) {
++			dctl_data_t dctl;
++			dctl.d32 =
++			    DWC_READ_REG32(&dev_if->dev_global_regs->dctl);
++			dctl.b.cgoutnak = 1;
++			DWC_WRITE_REG32(&dev_if->dev_global_regs->dctl,
++				dctl.d32);
++			goto out;
++		}
++
++		/* Disable the endpoint */
++		doepctl.d32 = DWC_READ_REG32(&dev_if->out_ep_regs[i]->doepctl);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[i]->doepctl, doepctl.d32);
++		return 1;
++	}
++	/* We come here from Incomplete ISO OUT handler */
++	if (dev_if->isoc_ep) {
++		dwc_ep_t *dwc_ep = (dwc_ep_t *)dev_if->isoc_ep;
++		uint32_t epnum = dwc_ep->num;
++		doepint_data_t doepint;
++		doepint.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[dwc_ep->num]->doepint);
++		dev_if->isoc_ep = NULL;
++		doepctl.d32 =
++		    DWC_READ_REG32(&dev_if->out_ep_regs[epnum]->doepctl);
++		DWC_PRINTF("Before disable DOEPCTL = %08x\n", doepctl.d32);
++		if (doepctl.b.epena) {
++			doepctl.b.epdis = 1;
++			doepctl.b.snak = 1;
++		}
++		DWC_WRITE_REG32(&dev_if->out_ep_regs[epnum]->doepctl,
++				doepctl.d32);
++		return 1;
++	} else
++		DWC_PRINTF("INTERRUPT Handler not implemented for %s\n",
++			   "Global OUT NAK Effective\n");
++
++out:
++	/* Clear interrupt */
++	gintsts.d32 = 0;
++	gintsts.b.goutnakeff = 1;
++	DWC_WRITE_REG32(&GET_CORE_IF(pcd)->core_global_regs->gintsts,
++			gintsts.d32);
++
++	return 1;
++}
++
++/**
++ * PCD interrupt handler.
++ *
++ * The PCD handles the device interrupts.  Many conditions can cause a
++ * device interrupt. When an interrupt occurs, the device interrupt
++ * service routine determines the cause of the interrupt and
++ * dispatches handling to the appropriate function. These interrupt
++ * handling functions are described below.
++ *
++ * All interrupt registers are processed from LSB to MSB.
++ *
++ */
++int32_t dwc_otg_pcd_handle_intr(dwc_otg_pcd_t * pcd)
++{
++	dwc_otg_core_if_t *core_if = GET_CORE_IF(pcd);
++#ifdef VERBOSE
++	dwc_otg_core_global_regs_t *global_regs = core_if->core_global_regs;
++#endif
++	gintsts_data_t gintr_status;
++	int32_t retval = 0;
++
++	/* Exit from ISR if core is hibernated */
++	if (core_if->hibernation_suspend == 1) {
++		return retval;
++	}
++#ifdef VERBOSE
++	DWC_DEBUGPL(DBG_ANY, "%s() gintsts=%08x	 gintmsk=%08x\n",
++		    __func__,
++		    DWC_READ_REG32(&global_regs->gintsts),
++		    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++	if (dwc_otg_is_device_mode(core_if)) {
++		DWC_SPINLOCK(pcd->lock);
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%08x  gintmsk=%08x\n",
++			    __func__,
++			    DWC_READ_REG32(&global_regs->gintsts),
++			    DWC_READ_REG32(&global_regs->gintmsk));
++#endif
++
++		gintr_status.d32 = dwc_otg_read_core_intr(core_if);
++
++		DWC_DEBUGPL(DBG_PCDV, "%s: gintsts&gintmsk=%08x\n",
++			    __func__, gintr_status.d32);
++
++		if (gintr_status.b.sofintr) {
++			retval |= dwc_otg_pcd_handle_sof_intr(pcd);
++		}
++		if (gintr_status.b.rxstsqlvl) {
++			retval |=
++			    dwc_otg_pcd_handle_rx_status_q_level_intr(pcd);
++		}
++		if (gintr_status.b.nptxfempty) {
++			retval |= dwc_otg_pcd_handle_np_tx_fifo_empty_intr(pcd);
++		}
++		if (gintr_status.b.goutnakeff) {
++			retval |= dwc_otg_pcd_handle_out_nak_effective(pcd);
++		}
++		if (gintr_status.b.i2cintr) {
++			retval |= dwc_otg_pcd_handle_i2c_intr(pcd);
++		}
++		if (gintr_status.b.erlysuspend) {
++			retval |= dwc_otg_pcd_handle_early_suspend_intr(pcd);
++		}
++		if (gintr_status.b.usbreset) {
++			retval |= dwc_otg_pcd_handle_usb_reset_intr(pcd);
++		}
++		if (gintr_status.b.enumdone) {
++			retval |= dwc_otg_pcd_handle_enum_done_intr(pcd);
++		}
++		if (gintr_status.b.isooutdrop) {
++			retval |=
++			    dwc_otg_pcd_handle_isoc_out_packet_dropped_intr
++			    (pcd);
++		}
++		if (gintr_status.b.eopframe) {
++			retval |=
++			    dwc_otg_pcd_handle_end_periodic_frame_intr(pcd);
++		}
++		if (gintr_status.b.inepint) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.outepintr) {
++			if (!core_if->multiproc_int_enable) {
++				retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++			}
++		}
++		if (gintr_status.b.epmismatch) {
++			retval |= dwc_otg_pcd_handle_ep_mismatch_intr(pcd);
++		}
++		if (gintr_status.b.fetsusp) {
++			retval |= dwc_otg_pcd_handle_ep_fetsusp_intr(pcd);
++		}
++		if (gintr_status.b.ginnakeff) {
++			retval |= dwc_otg_pcd_handle_in_nak_effective(pcd);
++		}
++		if (gintr_status.b.incomplisoin) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_in_intr(pcd);
++		}
++		if (gintr_status.b.incomplisoout) {
++			retval |=
++			    dwc_otg_pcd_handle_incomplete_isoc_out_intr(pcd);
++		}
++
++		/* In MPI mode Device Endpoints interrupts are asserted
++		 * without setting outepintr and inepint bits set, so these
++		 * Interrupt handlers are called without checking these bit-fields
++		 */
++		if (core_if->multiproc_int_enable) {
++			retval |= dwc_otg_pcd_handle_in_ep_intr(pcd);
++			retval |= dwc_otg_pcd_handle_out_ep_intr(pcd);
++		}
++#ifdef VERBOSE
++		DWC_DEBUGPL(DBG_PCDV, "%s() gintsts=%0x\n", __func__,
++			    DWC_READ_REG32(&global_regs->gintsts));
++#endif
++		DWC_SPINUNLOCK(pcd->lock);
++	}
++	return retval;
++}
++
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+new file mode 100644
+index 0000000..5d310df
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_pcd_linux.c
+@@ -0,0 +1,1358 @@
++ /* ==========================================================================
++  * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_pcd_linux.c $
++  * $Revision: #21 $
++  * $Date: 2012/08/10 $
++  * $Change: 2047372 $
++  *
++  * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++  * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++  * otherwise expressly agreed to in writing between Synopsys and you.
++  *
++  * The Software IS NOT an item of Licensed Software or Licensed Product under
++  * any End User Software License Agreement or Agreement for Licensed Product
++  * with Synopsys or any supplement thereto. You are permitted to use and
++  * redistribute this Software in source and binary forms, with or without
++  * modification, provided that redistributions of source code must retain this
++  * notice. You may not view, use, disclose, copy or distribute this file or
++  * any information contained herein except pursuant to this license grant from
++  * Synopsys. If you do not agree with this notice, including the disclaimer
++  * below, then you are not authorized to use the Software.
++  *
++  * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++  * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++  * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++  * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++  * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++  * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++  * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++  * DAMAGE.
++  * ========================================================================== */
++#ifndef DWC_HOST_ONLY
++
++/** @file
++ * This file implements the Peripheral Controller Driver.
++ *
++ * The Peripheral Controller Driver (PCD) is responsible for
++ * translating requests from the Function Driver into the appropriate
++ * actions on the DWC_otg controller. It isolates the Function Driver
++ * from the specifics of the controller by providing an API to the
++ * Function Driver.
++ *
++ * The Peripheral Controller Driver for Linux will implement the
++ * Gadget API, so that the existing Gadget drivers can be used.
++ * (Gadget Driver is the Linux terminology for a Function Driver.)
++ *
++ * The Linux Gadget API is defined in the header file
++ * <code><linux/usb_gadget.h></code>.  The USB EP operations API is
++ * defined in the structure <code>usb_ep_ops</code> and the USB
++ * Controller API is defined in the structure
++ * <code>usb_gadget_ops</code>.
++ *
++ */
++
++#include "dwc_otg_os_dep.h"
++#include "dwc_otg_pcd_if.h"
++#include "dwc_otg_pcd.h"
++#include "dwc_otg_driver.h"
++#include "dwc_otg_dbg.h"
++
++static struct gadget_wrapper {
++	dwc_otg_pcd_t *pcd;
++
++	struct usb_gadget gadget;
++	struct usb_gadget_driver *driver;
++
++	struct usb_ep ep0;
++	struct usb_ep in_ep[16];
++	struct usb_ep out_ep[16];
++
++} *gadget_wrapper;
++
++/* Display the contents of the buffer */
++extern void dump_msg(const u8 * buf, unsigned int length);
++/**
++ * Get the dwc_otg_pcd_ep_t* from usb_ep* pointer - NULL in case
++ * if the endpoint is not found
++ */
++static struct dwc_otg_pcd_ep *ep_from_handle(dwc_otg_pcd_t * pcd, void *handle)
++{
++	int i;
++	if (pcd->ep0.priv == handle) {
++		return &pcd->ep0;
++	}
++
++	for (i = 0; i < MAX_EPS_CHANNELS - 1; i++) {
++		if (pcd->in_ep[i].priv == handle)
++			return &pcd->in_ep[i];
++		if (pcd->out_ep[i].priv == handle)
++			return &pcd->out_ep[i];
++	}
++
++	return NULL;
++}
++
++/* USB Endpoint Operations */
++/*
++ * The following sections briefly describe the behavior of the Gadget
++ * API endpoint operations implemented in the DWC_otg driver
++ * software. Detailed descriptions of the generic behavior of each of
++ * these functions can be found in the Linux header file
++ * include/linux/usb_gadget.h.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_ep_ops. The Gadget Driver calls the wrapper
++ * function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper
++ * functions. Within each section, the corresponding DWC_otg PCD
++ * function name is specified.
++ *
++ */
++
++/**
++ * This function is called by the Gadget Driver for each EP to be
++ * configured for the current configuration (SET_CONFIGURATION).
++ *
++ * This function initializes the dwc_otg_ep_t data structure, and then
++ * calls dwc_otg_ep_activate.
++ */
++static int ep_enable(struct usb_ep *usb_ep,
++		     const struct usb_endpoint_descriptor *ep_desc)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, ep_desc);
++
++	if (!usb_ep || !ep_desc || ep_desc->bDescriptorType != USB_DT_ENDPOINT) {
++		DWC_WARN("%s, bad ep or descriptor\n", __func__);
++		return -EINVAL;
++	}
++	if (usb_ep == &gadget_wrapper->ep0) {
++		DWC_WARN("%s, bad ep(0)\n", __func__);
++		return -EINVAL;
++	}
++
++	/* Check FIFO size? */
++	if (!ep_desc->wMaxPacketSize) {
++		DWC_WARN("%s, bad %s maxpacket\n", __func__, usb_ep->name);
++		return -ERANGE;
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("%s, bogus device state\n", __func__);
++		return -ESHUTDOWN;
++	}
++
++	/* Delete after check - MAS */
++#if 0
++	nat = (uint32_t) ep_desc->wMaxPacketSize;
++	printk(KERN_ALERT "%s: nat (before) =%d\n", __func__, nat);
++	nat = (nat >> 11) & 0x03;
++	printk(KERN_ALERT "%s: nat (after) =%d\n", __func__, nat);
++#endif
++	retval = dwc_otg_pcd_ep_enable(gadget_wrapper->pcd,
++				       (const uint8_t *)ep_desc,
++				       (void *)usb_ep);
++	if (retval) {
++		DWC_WARN("dwc_otg_pcd_ep_enable failed\n");
++		return -EINVAL;
++	}
++
++	usb_ep->maxpacket = le16_to_cpu(ep_desc->wMaxPacketSize);
++
++	return 0;
++}
++
++/**
++ * This function is called when an EP is disabled due to disconnect or
++ * change in configuration. Any pending requests will terminate with a
++ * status of -ESHUTDOWN.
++ *
++ * This function modifies the dwc_otg_ep_t data structure for this EP,
++ * and then calls dwc_otg_ep_deactivate.
++ */
++static int ep_disable(struct usb_ep *usb_ep)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, usb_ep);
++	if (!usb_ep) {
++		DWC_DEBUGPL(DBG_PCD, "%s, %s not enabled\n", __func__,
++			    usb_ep ? usb_ep->name : NULL);
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_disable(gadget_wrapper->pcd, usb_ep);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function allocates a request object to use with the specified
++ * endpoint.
++ *
++ * @param ep The endpoint to be used with with the request
++ * @param gfp_flags the GFP_* flags to use.
++ */
++static struct usb_request *dwc_otg_pcd_alloc_request(struct usb_ep *ep,
++						     gfp_t gfp_flags)
++{
++	struct usb_request *usb_req;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d)\n", __func__, ep, gfp_flags);
++	if (0 == ep) {
++		DWC_WARN("%s() %s\n", __func__, "Invalid EP!\n");
++		return 0;
++	}
++	usb_req = kmalloc(sizeof(*usb_req), gfp_flags);
++	if (0 == usb_req) {
++		DWC_WARN("%s() %s\n", __func__, "request allocation failed!\n");
++		return 0;
++	}
++	memset(usb_req, 0, sizeof(*usb_req));
++	usb_req->dma = DWC_DMA_ADDR_INVALID;
++
++	return usb_req;
++}
++
++/**
++ * This function frees a request object.
++ *
++ * @param ep The endpoint associated with the request
++ * @param req The request being freed
++ */
++static void dwc_otg_pcd_free_request(struct usb_ep *ep, struct usb_request *req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, ep, req);
++
++	if (0 == ep || 0 == req) {
++		DWC_WARN("%s() %s\n", __func__,
++			 "Invalid ep or req argument!\n");
++		return;
++	}
++
++	kfree(req);
++}
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++/**
++ * This function allocates an I/O buffer to be used for a transfer
++ * to/from the specified endpoint.
++ *
++ * @param usb_ep The endpoint to be used with with the request
++ * @param bytes The desired number of bytes for the buffer
++ * @param dma Pointer to the buffer's DMA address; must be valid
++ * @param gfp_flags the GFP_* flags to use.
++ * @return address of a new buffer or null is buffer could not be allocated.
++ */
++static void *dwc_otg_pcd_alloc_buffer(struct usb_ep *usb_ep, unsigned bytes,
++				      dma_addr_t * dma, gfp_t gfp_flags)
++{
++	void *buf;
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%d,%p,%0x)\n", __func__, usb_ep, bytes,
++		    dma, gfp_flags);
++
++	/* Check dword alignment */
++	if ((bytes & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer size is not a multiple of"
++			 "DWORD size (%d)", __func__, bytes);
++	}
++
++	buf = dma_alloc_coherent(NULL, bytes, dma, gfp_flags);
++
++	/* Check dword alignment */
++	if (((int)buf & 0x3UL) != 0) {
++		DWC_WARN("%s() Buffer is not DWORD aligned (%p)",
++			 __func__, buf);
++	}
++
++	return buf;
++}
++
++/**
++ * This function frees an I/O buffer that was allocated by alloc_buffer.
++ *
++ * @param usb_ep the endpoint associated with the buffer
++ * @param buf address of the buffer
++ * @param dma The buffer's DMA address
++ * @param bytes The number of bytes of the buffer
++ */
++static void dwc_otg_pcd_free_buffer(struct usb_ep *usb_ep, void *buf,
++				    dma_addr_t dma, unsigned bytes)
++{
++	dwc_otg_pcd_t *pcd = 0;
++
++	pcd = gadget_wrapper->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%0x,%d)\n", __func__, buf, dma, bytes);
++
++	dma_free_coherent(NULL, bytes, buf, dma);
++}
++#endif
++
++/**
++ * This function is used to submit an I/O Request to an EP.
++ *
++ *	- When the request completes the request's completion callback
++ *	  is called to return the request to the driver.
++ *	- An EP, except control EPs, may have multiple requests
++ *	  pending.
++ *	- Once submitted the request cannot be examined or modified.
++ *	- Each request is turned into one or more packets.
++ *	- A BULK EP can queue any amount of data; the transfer is
++ *	  packetized.
++ *	- Zero length Packets are specified with the request 'zero'
++ *	  flag.
++ */
++static int ep_queue(struct usb_ep *usb_ep, struct usb_request *usb_req,
++		    gfp_t gfp_flags)
++{
++	dwc_otg_pcd_t *pcd;
++	struct dwc_otg_pcd_ep *ep = NULL;
++	int retval = 0, is_isoc_ep = 0;
++	dma_addr_t dma_addr = DWC_DMA_ADDR_INVALID;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p,%d)\n",
++		    __func__, usb_ep, usb_req, gfp_flags);
++
++	if (!usb_req || !usb_req->complete || !usb_req->buf) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	pcd = gadget_wrapper->pcd;
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++
++	DWC_DEBUGPL(DBG_PCD, "%s queue req %p, len %d buf %p\n",
++		    usb_ep->name, usb_req, usb_req->length, usb_req->buf);
++
++	usb_req->status = -EINPROGRESS;
++	usb_req->actual = 0;
++
++	ep = ep_from_handle(pcd, usb_ep);
++	if (ep == NULL)
++		is_isoc_ep = 0;
++	else
++		is_isoc_ep = (ep->dwc_ep.type == DWC_OTG_EP_TYPE_ISOC) ? 1 : 0;
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	dma_addr = usb_req->dma;
++#else
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                struct device *dev = NULL;
++
++                if (otg_dev != NULL)
++                        dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++
++		if (usb_req->length != 0 &&
++                    usb_req->dma == DWC_DMA_ADDR_INVALID) {
++                        dma_addr = dma_map_single(dev, usb_req->buf,
++                                                  usb_req->length,
++                                                  ep->dwc_ep.is_in ?
++                                                        DMA_TO_DEVICE:
++                                                        DMA_FROM_DEVICE);
++		}
++	}
++#endif
++
++#ifdef DWC_UTE_PER_IO
++	if (is_isoc_ep == 1) {
++		retval = dwc_otg_pcd_xiso_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++			usb_req->length, usb_req->zero, usb_req,
++			gfp_flags == GFP_ATOMIC ? 1 : 0, &usb_req->ext_req);
++		if (retval)
++			return -EINVAL;
++
++		return 0;
++	}
++#endif
++	retval = dwc_otg_pcd_ep_queue(pcd, usb_ep, usb_req->buf, dma_addr,
++				      usb_req->length, usb_req->zero, usb_req,
++				      gfp_flags == GFP_ATOMIC ? 1 : 0);
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * This function cancels an I/O request from an EP.
++ */
++static int ep_dequeue(struct usb_ep *usb_ep, struct usb_request *usb_req)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p,%p)\n", __func__, usb_ep, usb_req);
++
++	if (!usb_ep || !usb_req) {
++		DWC_WARN("bad argument\n");
++		return -EINVAL;
++	}
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_WARN("bogus device state\n");
++		return -ESHUTDOWN;
++	}
++	if (dwc_otg_pcd_ep_dequeue(gadget_wrapper->pcd, usb_ep, usb_req)) {
++		return -EINVAL;
++	}
++
++	return 0;
++}
++
++/**
++ * usb_ep_set_halt stalls an endpoint.
++ *
++ * usb_ep_clear_halt clears an endpoint halt and resets its data
++ * toggle.
++ *
++ * Both of these functions are implemented with the same underlying
++ * function. The behavior depends on the value argument.
++ *
++ * @param[in] usb_ep the Endpoint to halt or clear halt.
++ * @param[in] value
++ *	- 0 means clear_halt.
++ *	- 1 means set_halt,
++ *	- 2 means clear stall lock flag.
++ *	- 3 means set  stall lock flag.
++ */
++static int ep_halt(struct usb_ep *usb_ep, int value)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "HALT %s %d\n", usb_ep->name, value);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_halt(gadget_wrapper->pcd, usb_ep, value);
++	if (retval == -DWC_E_AGAIN) {
++		return -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++//#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,30))
++#if 0
++/**
++ * ep_wedge: sets the halt feature and ignores clear requests
++ *
++ * @usb_ep: the endpoint being wedged
++ *
++ * Use this to stall an endpoint and ignore CLEAR_FEATURE(HALT_ENDPOINT)
++ * requests. If the gadget driver clears the halt status, it will
++ * automatically unwedge the endpoint.
++ *
++ * Returns zero on success, else negative errno. *
++ * Check usb_ep_set_wedge() at "usb_gadget.h" for details
++ */
++static int ep_wedge(struct usb_ep *usb_ep)
++{
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCD, "WEDGE %s\n", usb_ep->name);
++
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++		return -EINVAL;
++	}
++
++	retval = dwc_otg_pcd_ep_wedge(gadget_wrapper->pcd, usb_ep);
++	if (retval == -DWC_E_AGAIN) {
++		retval = -EAGAIN;
++	} else if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++#endif
++
++#ifdef DWC_EN_ISOC
++/**
++ * This function is used to submit an ISOC Transfer Request to an EP.
++ *
++ *	- Every time a sync period completes the request's completion callback
++ *	  is called to provide data to the gadget driver.
++ *	- Once submitted the request cannot be modified.
++ *	- Each request is turned into periodic data packets untill ISO
++ *	  Transfer is stopped..
++ */
++static int iso_ep_start(struct usb_ep *usb_ep, struct usb_iso_request *req,
++			gfp_t gfp_flags)
++{
++	int retval = 0;
++
++	if (!req || !req->process_buffer || !req->buf0 || !req->buf1) {
++		DWC_WARN("bad params\n");
++		return -EINVAL;
++	}
++
++	if (!usb_ep) {
++		DWC_PRINTF("bad params\n");
++		return -EINVAL;
++	}
++
++	req->status = -EINPROGRESS;
++
++	retval =
++	    dwc_otg_pcd_iso_ep_start(gadget_wrapper->pcd, usb_ep, req->buf0,
++				     req->buf1, req->dma0, req->dma1,
++				     req->sync_frame, req->data_pattern_frame,
++				     req->data_per_frame,
++				     req->
++				     flags & USB_REQ_ISO_ASAP ? -1 :
++				     req->start_frame, req->buf_proc_intrvl,
++				     req, gfp_flags == GFP_ATOMIC ? 1 : 0);
++
++	if (retval) {
++		return -EINVAL;
++	}
++
++	return retval;
++}
++
++/**
++ * This function stops ISO EP Periodic Data Transfer.
++ */
++static int iso_ep_stop(struct usb_ep *usb_ep, struct usb_iso_request *req)
++{
++	int retval = 0;
++	if (!usb_ep) {
++		DWC_WARN("bad ep\n");
++	}
++
++	if (!gadget_wrapper->driver ||
++	    gadget_wrapper->gadget.speed == USB_SPEED_UNKNOWN) {
++		DWC_DEBUGPL(DBG_PCDV, "gadget.speed=%d\n",
++			    gadget_wrapper->gadget.speed);
++		DWC_WARN("bogus device state\n");
++	}
++
++	dwc_otg_pcd_iso_ep_stop(gadget_wrapper->pcd, usb_ep, req);
++	if (retval) {
++		retval = -EINVAL;
++	}
++
++	return retval;
++}
++
++static struct usb_iso_request *alloc_iso_request(struct usb_ep *ep,
++						 int packets, gfp_t gfp_flags)
++{
++	struct usb_iso_request *pReq = NULL;
++	uint32_t req_size;
++
++	req_size = sizeof(struct usb_iso_request);
++	req_size +=
++	    (2 * packets * (sizeof(struct usb_gadget_iso_packet_descriptor)));
++
++	pReq = kmalloc(req_size, gfp_flags);
++	if (!pReq) {
++		DWC_WARN("Can't allocate Iso Request\n");
++		return 0;
++	}
++	pReq->iso_packet_desc0 = (void *)(pReq + 1);
++
++	pReq->iso_packet_desc1 = pReq->iso_packet_desc0 + packets;
++
++	return pReq;
++}
++
++static void free_iso_request(struct usb_ep *ep, struct usb_iso_request *req)
++{
++	kfree(req);
++}
++
++static struct usb_isoc_ep_ops dwc_otg_pcd_ep_ops = {
++	.ep_ops = {
++		   .enable = ep_enable,
++		   .disable = ep_disable,
++
++		   .alloc_request = dwc_otg_pcd_alloc_request,
++		   .free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++		   .alloc_buffer = dwc_otg_pcd_alloc_buffer,
++		   .free_buffer = dwc_otg_pcd_free_buffer,
++#endif
++
++		   .queue = ep_queue,
++		   .dequeue = ep_dequeue,
++
++		   .set_halt = ep_halt,
++		   .fifo_status = 0,
++		   .fifo_flush = 0,
++		   },
++	.iso_ep_start = iso_ep_start,
++	.iso_ep_stop = iso_ep_stop,
++	.alloc_iso_request = alloc_iso_request,
++	.free_iso_request = free_iso_request,
++};
++
++#else
++
++	int (*enable) (struct usb_ep *ep,
++		const struct usb_endpoint_descriptor *desc);
++	int (*disable) (struct usb_ep *ep);
++
++	struct usb_request *(*alloc_request) (struct usb_ep *ep,
++		gfp_t gfp_flags);
++	void (*free_request) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*queue) (struct usb_ep *ep, struct usb_request *req,
++		gfp_t gfp_flags);
++	int (*dequeue) (struct usb_ep *ep, struct usb_request *req);
++
++	int (*set_halt) (struct usb_ep *ep, int value);
++	int (*set_wedge) (struct usb_ep *ep);
++
++	int (*fifo_status) (struct usb_ep *ep);
++	void (*fifo_flush) (struct usb_ep *ep);
++static struct usb_ep_ops dwc_otg_pcd_ep_ops = {
++	.enable = ep_enable,
++	.disable = ep_disable,
++
++	.alloc_request = dwc_otg_pcd_alloc_request,
++	.free_request = dwc_otg_pcd_free_request,
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28)
++	.alloc_buffer = dwc_otg_pcd_alloc_buffer,
++	.free_buffer = dwc_otg_pcd_free_buffer,
++#else
++	/* .set_wedge = ep_wedge, */
++        .set_wedge = NULL, /* uses set_halt instead */
++#endif
++
++	.queue = ep_queue,
++	.dequeue = ep_dequeue,
++
++	.set_halt = ep_halt,
++	.fifo_status = 0,
++	.fifo_flush = 0,
++
++};
++
++#endif /* _EN_ISOC_ */
++/*	Gadget Operations */
++/**
++ * The following gadget operations will be implemented in the DWC_otg
++ * PCD. Functions in the API that are not described below are not
++ * implemented.
++ *
++ * The Gadget API provides wrapper functions for each of the function
++ * pointers defined in usb_gadget_ops. The Gadget Driver calls the
++ * wrapper function, which then calls the underlying PCD function. The
++ * following sections are named according to the wrapper functions
++ * (except for ioctl, which doesn't have a wrapper function). Within
++ * each section, the corresponding DWC_otg PCD function name is
++ * specified.
++ *
++ */
++
++/**
++ *Gets the USB Frame number of the last SOF.
++ */
++static int get_frame_number(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	}
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++	return dwc_otg_pcd_get_frame_number(d->pcd);
++}
++
++#ifdef CONFIG_USB_DWC_OTG_LPM
++static int test_lpm_enabled(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	d = container_of(gadget, struct gadget_wrapper, gadget);
++
++	return dwc_otg_pcd_is_lpm_enabled(d->pcd);
++}
++#endif
++
++/**
++ * Initiates Session Request Protocol (SRP) to wakeup the host if no
++ * session is in progress. If a session is already in progress, but
++ * the device is suspended, remote wakeup signaling is started.
++ *
++ */
++static int wakeup(struct usb_gadget *gadget)
++{
++	struct gadget_wrapper *d;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, gadget);
++
++	if (gadget == 0) {
++		return -ENODEV;
++	} else {
++		d = container_of(gadget, struct gadget_wrapper, gadget);
++	}
++	dwc_otg_pcd_wakeup(d->pcd);
++	return 0;
++}
++
++static const struct usb_gadget_ops dwc_otg_pcd_ops = {
++	.get_frame = get_frame_number,
++	.wakeup = wakeup,
++#ifdef CONFIG_USB_DWC_OTG_LPM
++	.lpm_support = test_lpm_enabled,
++#endif
++	// current versions must always be self-powered
++};
++
++static int _setup(dwc_otg_pcd_t * pcd, uint8_t * bytes)
++{
++	int retval = -DWC_E_NOT_SUPPORTED;
++	if (gadget_wrapper->driver && gadget_wrapper->driver->setup) {
++		retval = gadget_wrapper->driver->setup(&gadget_wrapper->gadget,
++						       (struct usb_ctrlrequest
++							*)bytes);
++	}
++
++	if (retval == -ENOTSUPP) {
++		retval = -DWC_E_NOT_SUPPORTED;
++	} else if (retval < 0) {
++		retval = -DWC_E_INVALID;
++	}
++
++	return retval;
++}
++
++#ifdef DWC_EN_ISOC
++static int _isoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			  void *req_handle, int proc_buf_num)
++{
++	int i, packet_count;
++	struct usb_gadget_iso_packet_descriptor *iso_packet = 0;
++	struct usb_iso_request *iso_req = req_handle;
++
++	if (proc_buf_num) {
++		iso_packet = iso_req->iso_packet_desc1;
++	} else {
++		iso_packet = iso_req->iso_packet_desc0;
++	}
++	packet_count =
++	    dwc_otg_pcd_get_iso_packet_count(pcd, ep_handle, req_handle);
++	for (i = 0; i < packet_count; ++i) {
++		int status;
++		int actual;
++		int offset;
++		dwc_otg_pcd_get_iso_packet_params(pcd, ep_handle, req_handle,
++						  i, &status, &actual, &offset);
++		switch (status) {
++		case -DWC_E_NO_DATA:
++			status = -ENODATA;
++			break;
++		default:
++			if (status) {
++				DWC_PRINTF("unknown status in isoc packet\n");
++			}
++
++		}
++		iso_packet[i].status = status;
++		iso_packet[i].offset = offset;
++		iso_packet[i].actual_length = actual;
++	}
++
++	iso_req->status = 0;
++	iso_req->process_buffer(ep_handle, iso_req);
++
++	return 0;
++}
++#endif /* DWC_EN_ISOC */
++
++#ifdef DWC_UTE_PER_IO
++/**
++ * Copy the contents of the extended request to the Linux usb_request's
++ * extended part and call the gadget's completion.
++ *
++ * @param pcd			Pointer to the pcd structure
++ * @param ep_handle		Void pointer to the usb_ep structure
++ * @param req_handle	Void pointer to the usb_request structure
++ * @param status		Request status returned from the portable logic
++ * @param ereq_port		Void pointer to the extended request structure
++ *						created in the the portable part that contains the
++ *						results of the processed iso packets.
++ */
++static int _xisoc_complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++			   void *req_handle, int32_t status, void *ereq_port)
++{
++	struct dwc_ute_iso_req_ext *ereqorg = NULL;
++	struct dwc_iso_xreq_port *ereqport = NULL;
++	struct dwc_ute_iso_packet_descriptor *desc_org = NULL;
++	int i;
++	struct usb_request *req;
++	//struct dwc_ute_iso_packet_descriptor *
++	//int status = 0;
++
++	req = (struct usb_request *)req_handle;
++	ereqorg = &req->ext_req;
++	ereqport = (struct dwc_iso_xreq_port *)ereq_port;
++	desc_org = ereqorg->per_io_frame_descs;
++
++	if (req && req->complete) {
++		/* Copy the request data from the portable logic to our request */
++		for (i = 0; i < ereqport->pio_pkt_count; i++) {
++			desc_org[i].actual_length =
++			    ereqport->per_io_frame_descs[i].actual_length;
++			desc_org[i].status =
++			    ereqport->per_io_frame_descs[i].status;
++		}
++
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++		}
++
++		/* And call the gadget's completion */
++		req->complete(ep_handle, req);
++	}
++
++	return 0;
++}
++#endif /* DWC_UTE_PER_IO */
++
++static int _complete(dwc_otg_pcd_t * pcd, void *ep_handle,
++		     void *req_handle, int32_t status, uint32_t actual)
++{
++	struct usb_request *req = (struct usb_request *)req_handle;
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	struct dwc_otg_pcd_ep *ep = NULL;
++#endif
++
++	if (req && req->complete) {
++		switch (status) {
++		case -DWC_E_SHUTDOWN:
++			req->status = -ESHUTDOWN;
++			break;
++		case -DWC_E_RESTART:
++			req->status = -ECONNRESET;
++			break;
++		case -DWC_E_INVALID:
++			req->status = -EINVAL;
++			break;
++		case -DWC_E_TIMEOUT:
++			req->status = -ETIMEDOUT;
++			break;
++		default:
++			req->status = status;
++
++		}
++
++		req->actual = actual;
++		DWC_SPINUNLOCK(pcd->lock);
++		req->complete(ep_handle, req);
++		DWC_SPINLOCK(pcd->lock);
++	}
++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,27)
++	ep = ep_from_handle(pcd, ep_handle);
++	if (GET_CORE_IF(pcd)->dma_enable) {
++                if (req->length != 0) {
++                        dwc_otg_device_t *otg_dev = gadget_wrapper->pcd->otg_dev;
++                        struct device *dev = NULL;
++
++                        if (otg_dev != NULL)
++                                  dev = DWC_OTG_OS_GETDEV(otg_dev->os_dep);
++
++			dma_unmap_single(dev, req->dma, req->length,
++                                         ep->dwc_ep.is_in ?
++                                                DMA_TO_DEVICE: DMA_FROM_DEVICE);
++                }
++	}
++#endif
++
++	return 0;
++}
++
++static int _connect(dwc_otg_pcd_t * pcd, int speed)
++{
++	gadget_wrapper->gadget.speed = speed;
++	return 0;
++}
++
++static int _disconnect(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->disconnect) {
++		gadget_wrapper->driver->disconnect(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++static int _resume(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->resume) {
++		gadget_wrapper->driver->resume(&gadget_wrapper->gadget);
++	}
++
++	return 0;
++}
++
++static int _suspend(dwc_otg_pcd_t * pcd)
++{
++	if (gadget_wrapper->driver && gadget_wrapper->driver->suspend) {
++		gadget_wrapper->driver->suspend(&gadget_wrapper->gadget);
++	}
++	return 0;
++}
++
++/**
++ * This function updates the otg values in the gadget structure.
++ */
++static int _hnp_changed(dwc_otg_pcd_t * pcd)
++{
++
++	if (!gadget_wrapper->gadget.is_otg)
++		return 0;
++
++	gadget_wrapper->gadget.b_hnp_enable = get_b_hnp_enable(pcd);
++	gadget_wrapper->gadget.a_hnp_support = get_a_hnp_support(pcd);
++	gadget_wrapper->gadget.a_alt_hnp_support = get_a_alt_hnp_support(pcd);
++	return 0;
++}
++
++static int _reset(dwc_otg_pcd_t * pcd)
++{
++	return 0;
++}
++
++#ifdef DWC_UTE_CFI
++static int _cfi_setup(dwc_otg_pcd_t * pcd, void *cfi_req)
++{
++	int retval = -DWC_E_INVALID;
++	if (gadget_wrapper->driver->cfi_feature_setup) {
++		retval =
++		    gadget_wrapper->driver->
++		    cfi_feature_setup(&gadget_wrapper->gadget,
++				      (struct cfi_usb_ctrlrequest *)cfi_req);
++	}
++
++	return retval;
++}
++#endif
++
++static const struct dwc_otg_pcd_function_ops fops = {
++	.complete = _complete,
++#ifdef DWC_EN_ISOC
++	.isoc_complete = _isoc_complete,
++#endif
++	.setup = _setup,
++	.disconnect = _disconnect,
++	.connect = _connect,
++	.resume = _resume,
++	.suspend = _suspend,
++	.hnp_changed = _hnp_changed,
++	.reset = _reset,
++#ifdef DWC_UTE_CFI
++	.cfi_setup = _cfi_setup,
++#endif
++#ifdef DWC_UTE_PER_IO
++	.xisoc_complete = _xisoc_complete,
++#endif
++};
++
++/**
++ * This function is the top level PCD interrupt handler.
++ */
++static irqreturn_t dwc_otg_pcd_irq(int irq, void *dev)
++{
++	dwc_otg_pcd_t *pcd = dev;
++	int32_t retval = IRQ_NONE;
++
++	retval = dwc_otg_pcd_handle_intr(pcd);
++	if (retval != 0) {
++		S3C2410X_CLEAR_EINTPEND();
++	}
++	return IRQ_RETVAL(retval);
++}
++
++/**
++ * This function initialized the usb_ep structures to there default
++ * state.
++ *
++ * @param d Pointer on gadget_wrapper.
++ */
++void gadget_add_eps(struct gadget_wrapper *d)
++{
++	static const char *names[] = {
++
++		"ep0",
++		"ep1in",
++		"ep2in",
++		"ep3in",
++		"ep4in",
++		"ep5in",
++		"ep6in",
++		"ep7in",
++		"ep8in",
++		"ep9in",
++		"ep10in",
++		"ep11in",
++		"ep12in",
++		"ep13in",
++		"ep14in",
++		"ep15in",
++		"ep1out",
++		"ep2out",
++		"ep3out",
++		"ep4out",
++		"ep5out",
++		"ep6out",
++		"ep7out",
++		"ep8out",
++		"ep9out",
++		"ep10out",
++		"ep11out",
++		"ep12out",
++		"ep13out",
++		"ep14out",
++		"ep15out"
++	};
++
++	int i;
++	struct usb_ep *ep;
++	int8_t dev_endpoints;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s\n", __func__);
++
++	INIT_LIST_HEAD(&d->gadget.ep_list);
++	d->gadget.ep0 = &d->ep0;
++	d->gadget.speed = USB_SPEED_UNKNOWN;
++
++	INIT_LIST_HEAD(&d->gadget.ep0->ep_list);
++
++	/**
++	 * Initialize the EP0 structure.
++	 */
++	ep = &d->ep0;
++
++	/* Init the usb_ep structure. */
++	ep->name = names[0];
++	ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++	/**
++	 * @todo NGS: What should the max packet size be set to
++	 * here?  Before EP type is set?
++	 */
++	ep->maxpacket = MAX_PACKET_SIZE;
++	dwc_otg_pcd_ep_enable(d->pcd, NULL, ep);
++
++	list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++
++	/**
++	 * Initialize the EP structures.
++	 */
++	dev_endpoints = d->pcd->core_if->dev_if->num_in_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->in_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[d->pcd->in_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	dev_endpoints = d->pcd->core_if->dev_if->num_out_eps;
++
++	for (i = 0; i < dev_endpoints; i++) {
++		ep = &d->out_ep[i];
++
++		/* Init the usb_ep structure. */
++		ep->name = names[15 + d->pcd->out_ep[i].dwc_ep.num];
++		ep->ops = (struct usb_ep_ops *)&dwc_otg_pcd_ep_ops;
++
++		/**
++		 * @todo NGS: What should the max packet size be set to
++		 * here?  Before EP type is set?
++		 */
++		ep->maxpacket = MAX_PACKET_SIZE;
++
++		list_add_tail(&ep->ep_list, &d->gadget.ep_list);
++	}
++
++	/* remove ep0 from the list.  There is a ep0 pointer. */
++	list_del_init(&d->ep0.ep_list);
++
++	d->ep0.maxpacket = MAX_EP0_SIZE;
++}
++
++/**
++ * This function releases the Gadget device.
++ * required by device_unregister().
++ *
++ * @todo Should this do something?	Should it free the PCD?
++ */
++static void dwc_otg_pcd_gadget_release(struct device *dev)
++{
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p)\n", __func__, dev);
++}
++
++static struct gadget_wrapper *alloc_wrapper(dwc_bus_dev_t *_dev)
++{
++	static char pcd_name[] = "dwc_otg_pcd";
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	struct gadget_wrapper *d;
++	int retval;
++
++	d = DWC_ALLOC(sizeof(*d));
++	if (d == NULL) {
++		return NULL;
++	}
++
++	memset(d, 0, sizeof(*d));
++
++	d->gadget.name = pcd_name;
++	d->pcd = otg_dev->pcd;
++
++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30)
++	strcpy(d->gadget.dev.bus_id, "gadget");
++#else
++	dev_set_name(&d->gadget.dev, "%s", "gadget");
++#endif
++
++	d->gadget.dev.parent = &_dev->dev;
++	d->gadget.dev.release = dwc_otg_pcd_gadget_release;
++	d->gadget.ops = &dwc_otg_pcd_ops;
++	d->gadget.max_speed = dwc_otg_pcd_is_dualspeed(otg_dev->pcd) ? USB_SPEED_HIGH:USB_SPEED_FULL;
++	d->gadget.is_otg = dwc_otg_pcd_is_otg(otg_dev->pcd);
++
++	d->driver = 0;
++	/* Register the gadget device */
++	retval = device_register(&d->gadget.dev);
++	if (retval != 0) {
++		DWC_ERROR("device_register failed\n");
++		DWC_FREE(d);
++		return NULL;
++	}
++
++	return d;
++}
++
++static void free_wrapper(struct gadget_wrapper *d)
++{
++	if (d->driver) {
++		/* should have been done already by driver model core */
++		DWC_WARN("driver '%s' is still registered\n",
++			 d->driver->driver.name);
++		usb_gadget_unregister_driver(d->driver);
++	}
++
++	device_unregister(&d->gadget.dev);
++	DWC_FREE(d);
++}
++
++/**
++ * This function initialized the PCD portion of the driver.
++ *
++ */
++int pcd_init(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	int retval = 0;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev=%p\n", __func__, _dev, otg_dev);
++
++	otg_dev->pcd = dwc_otg_pcd_init(otg_dev->core_if);
++
++	if (!otg_dev->pcd) {
++		DWC_ERROR("dwc_otg_pcd_init failed\n");
++		return -ENOMEM;
++	}
++
++	otg_dev->pcd->otg_dev = otg_dev;
++	gadget_wrapper = alloc_wrapper(_dev);
++
++	/*
++	 * Initialize EP structures
++	 */
++	gadget_add_eps(gadget_wrapper);
++	/*
++	 * Setup interupt handler
++	 */
++#ifdef PLATFORM_INTERFACE
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    platform_get_irq(_dev, 0));
++	retval = request_irq(platform_get_irq(_dev, 0), dwc_otg_pcd_irq,
++			     IRQF_SHARED, gadget_wrapper->gadget.name,
++			     otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n",
++                          platform_get_irq(_dev, 0));
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#else
++	DWC_DEBUGPL(DBG_ANY, "registering handler for irq%d\n",
++                    _dev->irq);
++	retval = request_irq(_dev->irq, dwc_otg_pcd_irq,
++			     IRQF_SHARED | IRQF_DISABLED,
++			     gadget_wrapper->gadget.name, otg_dev->pcd);
++	if (retval != 0) {
++		DWC_ERROR("request of irq%d failed\n", _dev->irq);
++		free_wrapper(gadget_wrapper);
++		return -EBUSY;
++	}
++#endif
++
++	dwc_otg_pcd_start(gadget_wrapper->pcd, &fops);
++
++	return retval;
++}
++
++/**
++ * Cleanup the PCD.
++ */
++void pcd_remove(dwc_bus_dev_t *_dev)
++{
++	dwc_otg_device_t *otg_dev = DWC_OTG_BUSDRVDATA(_dev);
++	dwc_otg_pcd_t *pcd = otg_dev->pcd;
++
++	DWC_DEBUGPL(DBG_PCDV, "%s(%p) otg_dev %p\n", __func__, _dev, otg_dev);
++
++	/*
++	 * Free the IRQ
++	 */
++#ifdef PLATFORM_INTERFACE
++	free_irq(platform_get_irq(_dev, 0), pcd);
++#else
++	free_irq(_dev->irq, pcd);
++#endif
++	dwc_otg_pcd_remove(otg_dev->pcd);
++	free_wrapper(gadget_wrapper);
++	otg_dev->pcd = 0;
++}
++
++/**
++ * This function registers a gadget driver with the PCD.
++ *
++ * When a driver is successfully registered, it will receive control
++ * requests including set_configuration(), which enables non-control
++ * requests.  then usb traffic follows until a disconnect is reported.
++ * then a host may connect again, or the driver might get unbound.
++ *
++ * @param driver The driver being registered
++ * @param bind The bind function of gadget driver
++ */
++
++int usb_gadget_probe_driver(struct usb_gadget_driver *driver)
++{
++	int retval;
++
++	DWC_DEBUGPL(DBG_PCD, "registering gadget driver '%s'\n",
++		    driver->driver.name);
++
++	if (!driver || driver->max_speed == USB_SPEED_UNKNOWN ||
++	    !driver->bind ||
++	    !driver->unbind || !driver->disconnect || !driver->setup) {
++		DWC_DEBUGPL(DBG_PCDV, "EINVAL\n");
++		return -EINVAL;
++	}
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_PCDV, "ENODEV\n");
++		return -ENODEV;
++	}
++	if (gadget_wrapper->driver != 0) {
++		DWC_DEBUGPL(DBG_PCDV, "EBUSY (%p)\n", gadget_wrapper->driver);
++		return -EBUSY;
++	}
++
++	/* hook up the driver */
++	gadget_wrapper->driver = driver;
++	gadget_wrapper->gadget.dev.driver = &driver->driver;
++
++	DWC_DEBUGPL(DBG_PCD, "bind to driver %s\n", driver->driver.name);
++	retval = driver->bind(&gadget_wrapper->gadget, gadget_wrapper->driver);
++	if (retval) {
++		DWC_ERROR("bind to driver %s --> error %d\n",
++			  driver->driver.name, retval);
++		gadget_wrapper->driver = 0;
++		gadget_wrapper->gadget.dev.driver = 0;
++		return retval;
++	}
++	DWC_DEBUGPL(DBG_ANY, "registered gadget driver '%s'\n",
++		    driver->driver.name);
++	return 0;
++}
++EXPORT_SYMBOL(usb_gadget_probe_driver);
++
++/**
++ * This function unregisters a gadget driver
++ *
++ * @param driver The driver being unregistered
++ */
++int usb_gadget_unregister_driver(struct usb_gadget_driver *driver)
++{
++	//DWC_DEBUGPL(DBG_PCDV,"%s(%p)\n", __func__, _driver);
++
++	if (gadget_wrapper == 0) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): s_pcd==0\n", __func__,
++			    -ENODEV);
++		return -ENODEV;
++	}
++	if (driver == 0 || driver != gadget_wrapper->driver) {
++		DWC_DEBUGPL(DBG_ANY, "%s Return(%d): driver?\n", __func__,
++			    -EINVAL);
++		return -EINVAL;
++	}
++
++	driver->unbind(&gadget_wrapper->gadget);
++	gadget_wrapper->driver = 0;
++
++	DWC_DEBUGPL(DBG_ANY, "unregistered driver '%s'\n", driver->driver.name);
++	return 0;
++}
++
++EXPORT_SYMBOL(usb_gadget_unregister_driver);
++
++#endif /* DWC_HOST_ONLY */
+diff --git a/drivers/usb/host/dwc_otg/dwc_otg_regs.h b/drivers/usb/host/dwc_otg/dwc_otg_regs.h
+new file mode 100644
+index 0000000..8e0e7b5
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/dwc_otg_regs.h
+@@ -0,0 +1,2550 @@
++/* ==========================================================================
++ * $File: //dwh/usb_iip/dev/software/otg/linux/drivers/dwc_otg_regs.h $
++ * $Revision: #98 $
++ * $Date: 2012/08/10 $
++ * $Change: 2047372 $
++ *
++ * Synopsys HS OTG Linux Software Driver and documentation (hereinafter,
++ * "Software") is an Unsupported proprietary work of Synopsys, Inc. unless
++ * otherwise expressly agreed to in writing between Synopsys and you.
++ *
++ * The Software IS NOT an item of Licensed Software or Licensed Product under
++ * any End User Software License Agreement or Agreement for Licensed Product
++ * with Synopsys or any supplement thereto. You are permitted to use and
++ * redistribute this Software in source and binary forms, with or without
++ * modification, provided that redistributions of source code must retain this
++ * notice. You may not view, use, disclose, copy or distribute this file or
++ * any information contained herein except pursuant to this license grant from
++ * Synopsys. If you do not agree with this notice, including the disclaimer
++ * below, then you are not authorized to use the Software.
++ *
++ * THIS SOFTWARE IS BEING DISTRIBUTED BY SYNOPSYS SOLELY ON AN "AS IS" BASIS
++ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
++ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
++ * ARE HEREBY DISCLAIMED. IN NO EVENT SHALL SYNOPSYS BE LIABLE FOR ANY DIRECT,
++ * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
++ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
++ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
++ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
++ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
++ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
++ * DAMAGE.
++ * ========================================================================== */
++
++#ifndef __DWC_OTG_REGS_H__
++#define __DWC_OTG_REGS_H__
++
++#include "dwc_otg_core_if.h"
++
++/**
++ * @file
++ *
++ * This file contains the data structures for accessing the DWC_otg core registers.
++ *
++ * The application interfaces with the HS OTG core by reading from and
++ * writing to the Control and Status Register (CSR) space through the
++ * AHB Slave interface. These registers are 32 bits wide, and the
++ * addresses are 32-bit-block aligned.
++ * CSRs are classified as follows:
++ * - Core Global Registers
++ * - Device Mode Registers
++ * - Device Global Registers
++ * - Device Endpoint Specific Registers
++ * - Host Mode Registers
++ * - Host Global Registers
++ * - Host Port CSRs
++ * - Host Channel Specific Registers
++ *
++ * Only the Core Global registers can be accessed in both Device and
++ * Host modes. When the HS OTG core is operating in one mode, either
++ * Device or Host, the application must not access registers from the
++ * other mode. When the core switches from one mode to another, the
++ * registers in the new mode of operation must be reprogrammed as they
++ * would be after a power-on reset.
++ */
++
++/****************************************************************************/
++/** DWC_otg Core registers .
++ * The dwc_otg_core_global_regs structure defines the size
++ * and relative field offsets for the Core Global registers.
++ */
++typedef struct dwc_otg_core_global_regs {
++	/** OTG Control and Status Register.  <i>Offset: 000h</i> */
++	volatile uint32_t gotgctl;
++	/** OTG Interrupt Register.	 <i>Offset: 004h</i> */
++	volatile uint32_t gotgint;
++	/**Core AHB Configuration Register.	 <i>Offset: 008h</i> */
++	volatile uint32_t gahbcfg;
++
++#define DWC_GLBINTRMASK		0x0001
++#define DWC_DMAENABLE		0x0020
++#define DWC_NPTXEMPTYLVL_EMPTY	0x0080
++#define DWC_NPTXEMPTYLVL_HALFEMPTY	0x0000
++#define DWC_PTXEMPTYLVL_EMPTY	0x0100
++#define DWC_PTXEMPTYLVL_HALFEMPTY	0x0000
++
++	/**Core USB Configuration Register.	 <i>Offset: 00Ch</i> */
++	volatile uint32_t gusbcfg;
++	/**Core Reset Register.	 <i>Offset: 010h</i> */
++	volatile uint32_t grstctl;
++	/**Core Interrupt Register.	 <i>Offset: 014h</i> */
++	volatile uint32_t gintsts;
++	/**Core Interrupt Mask Register.  <i>Offset: 018h</i> */
++	volatile uint32_t gintmsk;
++	/**Receive Status Queue Read Register (Read Only).	<i>Offset: 01Ch</i> */
++	volatile uint32_t grxstsr;
++	/**Receive Status Queue Read & POP Register (Read Only).  <i>Offset: 020h</i>*/
++	volatile uint32_t grxstsp;
++	/**Receive FIFO Size Register.	<i>Offset: 024h</i> */
++	volatile uint32_t grxfsiz;
++	/**Non Periodic Transmit FIFO Size Register.  <i>Offset: 028h</i> */
++	volatile uint32_t gnptxfsiz;
++	/**Non Periodic Transmit FIFO/Queue Status Register (Read
++	 * Only). <i>Offset: 02Ch</i> */
++	volatile uint32_t gnptxsts;
++	/**I2C Access Register.	 <i>Offset: 030h</i> */
++	volatile uint32_t gi2cctl;
++	/**PHY Vendor Control Register.	 <i>Offset: 034h</i> */
++	volatile uint32_t gpvndctl;
++	/**General Purpose Input/Output Register.  <i>Offset: 038h</i> */
++	volatile uint32_t ggpio;
++	/**User ID Register.  <i>Offset: 03Ch</i> */
++	volatile uint32_t guid;
++	/**Synopsys ID Register (Read Only).  <i>Offset: 040h</i> */
++	volatile uint32_t gsnpsid;
++	/**User HW Config1 Register (Read Only).  <i>Offset: 044h</i> */
++	volatile uint32_t ghwcfg1;
++	/**User HW Config2 Register (Read Only).  <i>Offset: 048h</i> */
++	volatile uint32_t ghwcfg2;
++#define DWC_SLAVE_ONLY_ARCH 0
++#define DWC_EXT_DMA_ARCH 1
++#define DWC_INT_DMA_ARCH 2
++
++#define DWC_MODE_HNP_SRP_CAPABLE	0
++#define DWC_MODE_SRP_ONLY_CAPABLE	1
++#define DWC_MODE_NO_HNP_SRP_CAPABLE		2
++#define DWC_MODE_SRP_CAPABLE_DEVICE		3
++#define DWC_MODE_NO_SRP_CAPABLE_DEVICE	4
++#define DWC_MODE_SRP_CAPABLE_HOST	5
++#define DWC_MODE_NO_SRP_CAPABLE_HOST	6
++
++	/**User HW Config3 Register (Read Only).  <i>Offset: 04Ch</i> */
++	volatile uint32_t ghwcfg3;
++	/**User HW Config4 Register (Read Only).  <i>Offset: 050h</i>*/
++	volatile uint32_t ghwcfg4;
++	/** Core LPM Configuration register <i>Offset: 054h</i>*/
++	volatile uint32_t glpmcfg;
++	/** Global PowerDn Register <i>Offset: 058h</i> */
++	volatile uint32_t gpwrdn;
++	/** Global DFIFO SW Config Register  <i>Offset: 05Ch</i> */
++	volatile uint32_t gdfifocfg;
++	/** ADP Control Register  <i>Offset: 060h</i> */
++	volatile uint32_t adpctl;
++	/** Reserved  <i>Offset: 064h-0FFh</i> */
++	volatile uint32_t reserved39[39];
++	/** Host Periodic Transmit FIFO Size Register. <i>Offset: 100h</i> */
++	volatile uint32_t hptxfsiz;
++	/** Device Periodic Transmit FIFO#n Register if dedicated fifos are disabled,
++		otherwise Device Transmit FIFO#n Register.
++	 * <i>Offset: 104h + (FIFO_Number-1)*04h, 1 <= FIFO Number <= 15 (1<=n<=15).</i> */
++	volatile uint32_t dtxfsiz[15];
++} dwc_otg_core_global_regs_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Control
++ * and Status Register (GOTGCTL).  Set the bits using the bit
++ * fields then write the <i>d32</i> value to the register.
++ */
++typedef union gotgctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned sesreqscs:1;
++		unsigned sesreq:1;
++		unsigned vbvalidoven:1;
++		unsigned vbvalidovval:1;
++		unsigned avalidoven:1;
++		unsigned avalidovval:1;
++		unsigned bvalidoven:1;
++		unsigned bvalidovval:1;
++		unsigned hstnegscs:1;
++		unsigned hnpreq:1;
++		unsigned hstsethnpen:1;
++		unsigned devhnpen:1;
++		unsigned reserved12_15:4;
++		unsigned conidsts:1;
++		unsigned dbnctime:1;
++		unsigned asesvld:1;
++		unsigned bsesvld:1;
++		unsigned otgver:1;
++		unsigned reserved1:1;
++		unsigned multvalidbc:5;
++		unsigned chirpen:1;
++		unsigned reserved28_31:4;
++	} b;
++} gotgctl_data_t;
++
++/**
++ * This union represents the bit fields of the Core OTG Interrupt Register
++ * (GOTGINT).  Set/clear the bits using the bit fields then write the <i>d32</i>
++ * value to the register.
++ */
++typedef union gotgint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Current Mode */
++		unsigned reserved0_1:2;
++
++		/** Session End Detected */
++		unsigned sesenddet:1;
++
++		unsigned reserved3_7:5;
++
++		/** Session Request Success Status Change */
++		unsigned sesreqsucstschng:1;
++		/** Host Negotiation Success Status Change */
++		unsigned hstnegsucstschng:1;
++
++		unsigned reserved10_16:7;
++
++		/** Host Negotiation Detected */
++		unsigned hstnegdet:1;
++		/** A-Device Timeout Change */
++		unsigned adevtoutchng:1;
++		/** Debounce Done */
++		unsigned debdone:1;
++		/** Multi-Valued input changed */
++		unsigned mvic:1;
++
++		unsigned reserved31_21:11;
++
++	} b;
++} gotgint_data_t;
++
++/**
++ * This union represents the bit fields of the Core AHB Configuration
++ * Register (GAHBCFG). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gahbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned glblintrmsk:1;
++#define DWC_GAHBCFG_GLBINT_ENABLE		1
++
++		unsigned hburstlen:4;
++#define DWC_GAHBCFG_INT_DMA_BURST_SINGLE	0
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR		1
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR4		3
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR8		5
++#define DWC_GAHBCFG_INT_DMA_BURST_INCR16	7
++
++		unsigned dmaenable:1;
++#define DWC_GAHBCFG_DMAENABLE			1
++		unsigned reserved:1;
++		unsigned nptxfemplvl_txfemplvl:1;
++		unsigned ptxfemplvl:1;
++#define DWC_GAHBCFG_TXFEMPTYLVL_EMPTY		1
++#define DWC_GAHBCFG_TXFEMPTYLVL_HALFEMPTY	0
++		unsigned reserved9_20:12;
++		unsigned remmemsupp:1;
++		unsigned notialldmawrit:1;
++		unsigned ahbsingle:1;
++		unsigned reserved24_31:8;
++	} b;
++} gahbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core USB Configuration
++ * Register (GUSBCFG). Set the bits using the bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union gusbcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned toutcal:3;
++		unsigned phyif:1;
++		unsigned ulpi_utmi_sel:1;
++		unsigned fsintf:1;
++		unsigned physel:1;
++		unsigned ddrsel:1;
++		unsigned srpcap:1;
++		unsigned hnpcap:1;
++		unsigned usbtrdtim:4;
++		unsigned reserved1:1;
++		unsigned phylpwrclksel:1;
++		unsigned otgutmifssel:1;
++		unsigned ulpi_fsls:1;
++		unsigned ulpi_auto_res:1;
++		unsigned ulpi_clk_sus_m:1;
++		unsigned ulpi_ext_vbus_drv:1;
++		unsigned ulpi_int_vbus_indicator:1;
++		unsigned term_sel_dl_pulse:1;
++		unsigned indicator_complement:1;
++		unsigned indicator_pass_through:1;
++		unsigned ulpi_int_prot_dis:1;
++		unsigned ic_usb_cap:1;
++		unsigned ic_traffic_pull_remove:1;
++		unsigned tx_end_delay:1;
++		unsigned force_host_mode:1;
++		unsigned force_dev_mode:1;
++		unsigned reserved31:1;
++	} b;
++} gusbcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core Reset Register
++ * (GRSTCTL).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union grstctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Core Soft Reset (CSftRst) (Device and Host)
++		 *
++		 * The application can flush the control logic in the
++		 * entire core using this bit. This bit resets the
++		 * pipelines in the AHB Clock domain as well as the
++		 * PHY Clock domain.
++		 *
++		 * The state machines are reset to an IDLE state, the
++		 * control bits in the CSRs are cleared, all the
++		 * transmit FIFOs and the receive FIFO are flushed.
++		 *
++		 * The status mask bits that control the generation of
++		 * the interrupt, are cleared, to clear the
++		 * interrupt. The interrupt status bits are not
++		 * cleared, so the application can get the status of
++		 * any events that occurred in the core after it has
++		 * set this bit.
++		 *
++		 * Any transactions on the AHB are terminated as soon
++		 * as possible following the protocol. Any
++		 * transactions on the USB are terminated immediately.
++		 *
++		 * The configuration settings in the CSRs are
++		 * unchanged, so the software doesn't have to
++		 * reprogram these registers (Device
++		 * Configuration/Host Configuration/Core System
++		 * Configuration/Core PHY Configuration).
++		 *
++		 * The application can write to this bit, any time it
++		 * wants to reset the core. This is a self clearing
++		 * bit and the core clears this bit after all the
++		 * necessary logic is reset in the core, which may
++		 * take several clocks, depending on the current state
++		 * of the core.
++		 */
++		unsigned csftrst:1;
++		/** Hclk Soft Reset
++		 *
++		 * The application uses this bit to reset the control logic in
++		 * the AHB clock domain. Only AHB clock domain pipelines are
++		 * reset.
++		 */
++		unsigned hsftrst:1;
++		/** Host Frame Counter Reset (Host Only)<br>
++		 *
++		 * The application can reset the (micro)frame number
++		 * counter inside the core, using this bit. When the
++		 * (micro)frame counter is reset, the subsequent SOF
++		 * sent out by the core, will have a (micro)frame
++		 * number of 0.
++		 */
++		unsigned hstfrm:1;
++		/** In Token Sequence Learning Queue Flush
++		 * (INTknQFlsh) (Device Only)
++		 */
++		unsigned intknqflsh:1;
++		/** RxFIFO Flush (RxFFlsh) (Device and Host)
++		 *
++		 * The application can flush the entire Receive FIFO
++		 * using this bit. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is reading from the RxFIFO nor the MAC
++		 * is writing the data in to the FIFO. The
++		 * application should wait until the bit is cleared
++		 * before performing any other operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned rxfflsh:1;
++		/** TxFIFO Flush (TxFFlsh) (Device and Host).
++		 *
++		 * This bit is used to selectively flush a single or
++		 * all transmit FIFOs. The application must first
++		 * ensure that the core is not in the middle of a
++		 * transaction. The application should write into
++		 * this bit, only after making sure that neither the
++		 * DMA engine is writing into the TxFIFO nor the MAC
++		 * is reading the data out of the FIFO. The
++		 * application should wait until the core clears this
++		 * bit, before performing any operations. This bit
++		 * will takes 8 clocks (slowest of PHY or AHB clock)
++		 * to clear.
++		 */
++		unsigned txfflsh:1;
++
++		/** TxFIFO Number (TxFNum) (Device and Host).
++		 *
++		 * This is the FIFO number which needs to be flushed,
++		 * using the TxFIFO Flush bit. This field should not
++		 * be changed until the TxFIFO Flush bit is cleared by
++		 * the core.
++		 *	 - 0x0 : Non Periodic TxFIFO Flush
++		 *	 - 0x1 : Periodic TxFIFO #1 Flush in device mode
++		 *	   or Periodic TxFIFO in host mode
++		 *	 - 0x2 : Periodic TxFIFO #2 Flush in device mode.
++		 *	 - ...
++		 *	 - 0xF : Periodic TxFIFO #15 Flush in device mode
++		 *	 - 0x10: Flush all the Transmit NonPeriodic and
++		 *	   Transmit Periodic FIFOs in the core
++		 */
++		unsigned txfnum:5;
++		/** Reserved */
++		unsigned reserved11_29:19;
++		/** DMA Request Signal.	 Indicated DMA request is in
++		 * probress. Used for debug purpose. */
++		unsigned dmareq:1;
++		/** AHB Master Idle.  Indicates the AHB Master State
++		 * Machine is in IDLE condition. */
++		unsigned ahbidle:1;
++	} b;
++} grstctl_t;
++
++/**
++ * This union represents the bit fields of the Core Interrupt Mask
++ * Register (GINTMSK). Set/clear the bits using the bit fields then
++ * write the <i>d32</i> value to the register.
++ */
++typedef union gintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepintr:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintmsk_data_t;
++/**
++ * This union represents the bit fields of the Core Interrupt Register
++ * (GINTSTS).  Set/clear the bits using the bit fields then write the
++ * <i>d32</i> value to the register.
++ */
++typedef union gintsts_data {
++	/** raw register data */
++	uint32_t d32;
++#define DWC_SOF_INTR_MASK 0x0008
++	/** register bits */
++	struct {
++#define DWC_HOST_MODE 1
++		unsigned curmode:1;
++		unsigned modemismatch:1;
++		unsigned otgintr:1;
++		unsigned sofintr:1;
++		unsigned rxstsqlvl:1;
++		unsigned nptxfempty:1;
++		unsigned ginnakeff:1;
++		unsigned goutnakeff:1;
++		unsigned ulpickint:1;
++		unsigned i2cintr:1;
++		unsigned erlysuspend:1;
++		unsigned usbsuspend:1;
++		unsigned usbreset:1;
++		unsigned enumdone:1;
++		unsigned isooutdrop:1;
++		unsigned eopframe:1;
++		unsigned restoredone:1;
++		unsigned epmismatch:1;
++		unsigned inepint:1;
++		unsigned outepintr:1;
++		unsigned incomplisoin:1;
++		unsigned incomplisoout:1;
++		unsigned fetsusp:1;
++		unsigned resetdet:1;
++		unsigned portintr:1;
++		unsigned hcintr:1;
++		unsigned ptxfempty:1;
++		unsigned lpmtranrcvd:1;
++		unsigned conidstschng:1;
++		unsigned disconnect:1;
++		unsigned sessreqintr:1;
++		unsigned wkupintr:1;
++	} b;
++} gintsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union device_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned epnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++#define DWC_STS_DATA_UPDT		0x2	// OUT Data Packet
++#define DWC_STS_XFER_COMP		0x3	// OUT Data Transfer Complete
++
++#define DWC_DSTS_GOUT_NAK		0x1	// Global OUT NAK
++#define DWC_DSTS_SETUP_COMP		0x4	// Setup Phase Complete
++#define DWC_DSTS_SETUP_UPDT 0x6	// SETUP Packet
++		unsigned pktsts:4;
++		unsigned fn:4;
++		unsigned reserved25_31:7;
++	} b;
++} device_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Receive Status Read and
++ * Pop Registers (GRXSTSR, GRXSTSP) Read the register into the <i>d32</i>
++ * element then read out the bits using the <i>b</i>it elements.
++ */
++typedef union host_grxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned chnum:4;
++		unsigned bcnt:11;
++		unsigned dpid:2;
++
++		unsigned pktsts:4;
++#define DWC_GRXSTS_PKTSTS_IN			  0x2
++#define DWC_GRXSTS_PKTSTS_IN_XFER_COMP	  0x3
++#define DWC_GRXSTS_PKTSTS_DATA_TOGGLE_ERR 0x5
++#define DWC_GRXSTS_PKTSTS_CH_HALTED		  0x7
++
++		unsigned reserved21_31:11;
++	} b;
++} host_grxsts_data_t;
++
++/**
++ * This union represents the bit fields in the FIFO Size Registers (HPTXFSIZ,
++ * GNPTXFSIZ, DPTXFSIZn, DIEPTXFn). Read the register into the <i>d32</i> element
++ * then read out the bits using the <i>b</i>it elements.
++ */
++typedef union fifosize_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned startaddr:16;
++		unsigned depth:16;
++	} b;
++} fifosize_data_t;
++
++/**
++ * This union represents the bit fields in the Non-Periodic Transmit
++ * FIFO/Queue Status Register (GNPTXSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union gnptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned nptxfspcavail:16;
++		unsigned nptxqspcavail:8;
++		/** Top of the Non-Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (Last entry for the selected
++		 *	  channel/EP)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - IN/OUT
++		 *	  - 2'b01 - Zero Length OUT
++		 *	  - 2'b10 - PING/Complete Split
++		 *	  - 2'b11 - Channel Halt
++		 *	- bits 30:27 - Channel/EP Number
++		 */
++		unsigned nptxqtop_terminate:1;
++		unsigned nptxqtop_token:2;
++		unsigned nptxqtop_chnep:4;
++		unsigned reserved:1;
++	} b;
++} gnptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Transmit
++ * FIFO Status Register (DTXFSTS). Read the register into the
++ * <i>d32</i> element then read out the bits using the <i>b</i>it
++ * elements.
++ */
++typedef union dtxfsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned txfspcavail:16;
++		unsigned reserved:16;
++	} b;
++} dtxfsts_data_t;
++
++/**
++ * This union represents the bit fields in the I2C Control Register
++ * (I2CCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gi2cctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:8;
++		unsigned regaddr:8;
++		unsigned addr:7;
++		unsigned i2cen:1;
++		unsigned ack:1;
++		unsigned i2csuspctl:1;
++		unsigned i2cdevaddr:2;
++		unsigned i2cdatse0:1;
++		unsigned reserved:1;
++		unsigned rw:1;
++		unsigned bsydne:1;
++	} b;
++} gi2cctl_data_t;
++
++/**
++ * This union represents the bit fields in the PHY Vendor Control Register
++ * (GPVNDCTL). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpvndctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned regdata:8;
++		unsigned vctrl:8;
++		unsigned regaddr16_21:6;
++		unsigned regwr:1;
++		unsigned reserved23_24:2;
++		unsigned newregreq:1;
++		unsigned vstsbsy:1;
++		unsigned vstsdone:1;
++		unsigned reserved28_30:3;
++		unsigned disulpidrvr:1;
++	} b;
++} gpvndctl_data_t;
++
++/**
++ * This union represents the bit fields in the General Purpose
++ * Input/Output Register (GGPIO).
++ * Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union ggpio_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned gpi:16;
++		unsigned gpo:16;
++	} b;
++} ggpio_data_t;
++
++/**
++ * This union represents the bit fields in the User ID Register
++ * (GUID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union guid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} guid_data_t;
++
++/**
++ * This union represents the bit fields in the Synopsys ID Register
++ * (GSNPSID). Read the register into the <i>d32</i> element then read out the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gsnpsid_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned rwdata:32;
++	} b;
++} gsnpsid_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config1
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ep_dir0:2;
++		unsigned ep_dir1:2;
++		unsigned ep_dir2:2;
++		unsigned ep_dir3:2;
++		unsigned ep_dir4:2;
++		unsigned ep_dir5:2;
++		unsigned ep_dir6:2;
++		unsigned ep_dir7:2;
++		unsigned ep_dir8:2;
++		unsigned ep_dir9:2;
++		unsigned ep_dir10:2;
++		unsigned ep_dir11:2;
++		unsigned ep_dir12:2;
++		unsigned ep_dir13:2;
++		unsigned ep_dir14:2;
++		unsigned ep_dir15:2;
++	} b;
++} hwcfg1_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config2
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg2_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG2 */
++		unsigned op_mode:3;
++#define DWC_HWCFG2_OP_MODE_HNP_SRP_CAPABLE_OTG 0
++#define DWC_HWCFG2_OP_MODE_SRP_ONLY_CAPABLE_OTG 1
++#define DWC_HWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE_OTG 2
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
++#define DWC_HWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
++#define DWC_HWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
++
++		unsigned architecture:2;
++		unsigned point2point:1;
++		unsigned hs_phy_type:2;
++#define DWC_HWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI 1
++#define DWC_HWCFG2_HS_PHY_TYPE_ULPI 2
++#define DWC_HWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
++
++		unsigned fs_phy_type:2;
++		unsigned num_dev_ep:4;
++		unsigned num_host_chan:4;
++		unsigned perio_ep_supported:1;
++		unsigned dynamic_fifo:1;
++		unsigned multi_proc_int:1;
++		unsigned reserved21:1;
++		unsigned nonperio_tx_q_depth:2;
++		unsigned host_perio_tx_q_depth:2;
++		unsigned dev_token_q_depth:5;
++		unsigned otg_enable_ic_usb:1;
++	} b;
++} hwcfg2_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config3
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg3_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/* GHWCFG3 */
++		unsigned xfer_size_cntr_width:4;
++		unsigned packet_size_cntr_width:3;
++		unsigned otg_func:1;
++		unsigned i2c:1;
++		unsigned vendor_ctrl_if:1;
++		unsigned optional_features:1;
++		unsigned synch_reset_type:1;
++		unsigned adp_supp:1;
++		unsigned otg_enable_hsic:1;
++		unsigned bc_support:1;
++		unsigned otg_lpm_en:1;
++		unsigned dfifo_depth:16;
++	} b;
++} hwcfg3_data_t;
++
++/**
++ * This union represents the bit fields in the User HW Config4
++ * Register.  Read the register into the <i>d32</i> element then read
++ * out the bits using the <i>b</i>it elements.
++ */
++typedef union hwcfg4_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned num_dev_perio_in_ep:4;
++		unsigned power_optimiz:1;
++		unsigned min_ahb_freq:1;
++		unsigned hiber:1;
++		unsigned xhiber:1;
++		unsigned reserved:6;
++		unsigned utmi_phy_data_width:2;
++		unsigned num_dev_mode_ctrl_ep:4;
++		unsigned iddig_filt_en:1;
++		unsigned vbus_valid_filt_en:1;
++		unsigned a_valid_filt_en:1;
++		unsigned b_valid_filt_en:1;
++		unsigned session_end_filt_en:1;
++		unsigned ded_fifo_en:1;
++		unsigned num_in_eps:4;
++		unsigned desc_dma:1;
++		unsigned desc_dma_dyn:1;
++	} b;
++} hwcfg4_data_t;
++
++/**
++ * This union represents the bit fields of the Core LPM Configuration
++ * Register (GLPMCFG). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union glpmctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** LPM-Capable (LPMCap) (Device and Host)
++		 * The application uses this bit to control
++		 * the DWC_otg core LPM capabilities.
++		 */
++		unsigned lpm_cap_en:1;
++		/** LPM response programmed by application (AppL1Res) (Device)
++		 * Handshake response to LPM token pre-programmed
++		 * by device application software.
++		 */
++		unsigned appl_resp:1;
++		/** Host Initiated Resume Duration (HIRD) (Device and Host)
++		 * In Host mode this field indicates the value of HIRD
++		 * to be sent in an LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token HIRD bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned hird:4;
++		/** RemoteWakeEnable (bRemoteWake) (Device and Host)
++		 * In Host mode this bit indicates the value of remote
++		 * wake up to be sent in wIndex field of LPM transaction.
++		 * In Device mode this field is updated with the
++		 * Received LPM Token bRemoteWake bmAttribute
++		 * when an ACK/NYET/STALL response is sent
++		 * to an LPM transaction.
++		 */
++		unsigned rem_wkup_en:1;
++		/** Enable utmi_sleep_n (EnblSlpM) (Device and Host)
++		 * The application uses this bit to control
++		 * the utmi_sleep_n assertion to the PHY when in L1 state.
++		 */
++		unsigned en_utmi_sleep:1;
++		/** HIRD Threshold (HIRD_Thres) (Device and Host)
++		 */
++		unsigned hird_thres:5;
++		/** LPM Response (CoreL1Res) (Device and Host)
++		 * In Host mode this bit contains handsake response to
++		 * LPM transaction.
++		 * In Device mode the response of the core to
++		 * LPM transaction received is reflected in these two bits.
++			- 0x0 : ERROR (No handshake response)
++			- 0x1 : STALL
++			- 0x2 : NYET
++			- 0x3 : ACK
++		 */
++		unsigned lpm_resp:2;
++		/** Port Sleep Status (SlpSts) (Device and Host)
++		 * This bit is set as long as a Sleep condition
++		 * is present on the USB bus.
++		 */
++		unsigned prt_sleep_sts:1;
++		/** Sleep State Resume OK (L1ResumeOK) (Device and Host)
++		 * Indicates that the application or host
++		 * can start resume from Sleep state.
++		 */
++		unsigned sleep_state_resumeok:1;
++		/** LPM channel Index (LPM_Chnl_Indx) (Host)
++		 * The channel number on which the LPM transaction
++		 * has to be applied while sending
++		 * an LPM transaction to the local device.
++		 */
++		unsigned lpm_chan_index:4;
++		/** LPM Retry Count (LPM_Retry_Cnt) (Host)
++		 * Number host retries that would be performed
++		 * if the device response was not valid response.
++		 */
++		unsigned retry_count:3;
++		/** Send LPM Transaction (SndLPM) (Host)
++		 * When set by application software,
++		 * an LPM transaction containing two tokens
++		 * is sent.
++		 */
++		unsigned send_lpm:1;
++		/** LPM Retry status (LPM_RetryCnt_Sts) (Host)
++		 * Number of LPM Host Retries still remaining
++		 * to be transmitted for the current LPM sequence
++		 */
++		unsigned retry_count_sts:3;
++		unsigned reserved28_29:2;
++		/** In host mode once this bit is set, the host
++		 * configures to drive the HSIC Idle state on the bus.
++		 * It then waits for the  device to initiate the Connect sequence.
++		 * In device mode once this bit is set, the device waits for
++		 * the HSIC Idle line state on the bus. Upon receving the Idle
++		 * line state, it initiates the HSIC Connect sequence.
++		 */
++		unsigned hsic_connect:1;
++		/** This bit overrides and functionally inverts
++		 * the if_select_hsic input port signal.
++		 */
++		unsigned inv_sel_hsic:1;
++	} b;
++} glpmcfg_data_t;
++
++/**
++ * This union represents the bit fields of the Core ADP Timer, Control and
++ * Status Register (ADPTIMCTLSTS). Set the bits using bit fields then write
++ * the <i>d32</i> value to the register.
++ */
++typedef union adpctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Probe Discharge (PRB_DSCHG)
++		 *  These bits set the times for TADP_DSCHG.
++		 *  These bits are defined as follows:
++		 *  2'b00 - 4 msec
++		 *  2'b01 - 8 msec
++		 *  2'b10 - 16 msec
++		 *  2'b11 - 32 msec
++		 */
++		unsigned prb_dschg:2;
++		/** Probe Delta (PRB_DELTA)
++		 *  These bits set the resolution for RTIM   value.
++		 *  The bits are defined in units of 32 kHz clock cycles as follows:
++		 *  2'b00  -  1 cycles
++		 *  2'b01  -  2 cycles
++		 *  2'b10 -  3 cycles
++		 *  2'b11 - 4 cycles
++		 *  For example if this value is chosen to 2'b01, it means that RTIM
++		 *  increments for every 3(three) 32Khz clock cycles.
++		 */
++		unsigned prb_delta:2;
++		/** Probe Period (PRB_PER)
++		 *  These bits sets the TADP_PRD as shown in Figure 4 as follows:
++		 *  2'b00  -  0.625 to 0.925 sec (typical 0.775 sec)
++		 *  2'b01  -  1.25 to 1.85 sec (typical 1.55 sec)
++		 *  2'b10  -  1.9 to 2.6 sec (typical 2.275 sec)
++		 *  2'b11  -  Reserved
++		 */
++		unsigned prb_per:2;
++		/** These bits capture the latest time it took for VBUS to ramp from
++		 *  VADP_SINK to VADP_PRB.
++		 *  0x000  -  1 cycles
++		 *  0x001  -  2 cycles
++		 *  0x002  -  3 cycles
++		 *  etc
++		 *  0x7FF  -  2048 cycles
++		 *  A time of 1024 cycles at 32 kHz corresponds to a time of 32 msec.
++		*/
++		unsigned rtim:11;
++		/** Enable Probe (EnaPrb)
++		 *  When programmed to 1'b1, the core performs a probe operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enaprb:1;
++		/** Enable Sense (EnaSns)
++		 *  When programmed to 1'b1, the core performs a Sense operation.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned enasns:1;
++		/** ADP Reset (ADPRes)
++		 *  When set, ADP controller is reset.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adpres:1;
++		/** ADP Enable (ADPEn)
++		 *  When set, the core performs either ADP probing or sensing
++		 *  based on EnaPrb or EnaSns.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adpen:1;
++		/** ADP Probe Interrupt (ADP_PRB_INT)
++		 *  When this bit is set, it means that the VBUS
++		 *  voltage is greater than VADP_PRB or VADP_PRB is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int:1;
++		/**
++		 *  ADP Sense Interrupt (ADP_SNS_INT)
++		 *  When this bit is set, it means that the VBUS voltage is greater than
++		 *  VADP_SNS value or VADP_SNS is reached.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int:1;
++		/** ADP Tomeout Interrupt (ADP_TMOUT_INT)
++		 *  This bit is relevant only for an ADP probe.
++		 *  When this bit is set, it means that the ramp time has
++		 *  completed ie ADPCTL.RTIM has reached its terminal value
++		 *  of 0x7FF.  This is a debug feature that allows software
++		 *  to read the ramp time after each cycle.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int:1;
++		/** ADP Probe Interrupt Mask (ADP_PRB_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_PRB_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_prb_int_msk:1;
++		/** ADP Sense Interrupt Mask (ADP_SNS_INT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_SNS_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_sns_int_msk:1;
++		/** ADP Timoeout Interrupt Mask (ADP_TMOUT_MSK)
++		 *  When this bit is set, it unmasks the interrupt due to ADP_TMOUT_INT.
++		 *  This bit is valid only if OTG_Ver = 1'b1.
++		 */
++		unsigned adp_tmout_int_msk:1;
++		/** Access Request
++		 * 2'b00 - Read/Write Valid (updated by the core)
++		 * 2'b01 - Read
++		 * 2'b00 - Write
++		 * 2'b00 - Reserved
++		 */
++		unsigned ar:2;
++		 /** Reserved */
++		unsigned reserved29_31:3;
++	} b;
++} adpctl_data_t;
++
++////////////////////////////////////////////
++// Device Registers
++/**
++ * Device Global Registers. <i>Offsets 800h-BFFh</i>
++ *
++ * The following structures define the size and relative field offsets
++ * for the Device Mode Registers.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_global_regs {
++	/** Device Configuration Register. <i>Offset 800h</i> */
++	volatile uint32_t dcfg;
++	/** Device Control Register. <i>Offset: 804h</i> */
++	volatile uint32_t dctl;
++	/** Device Status Register (Read Only). <i>Offset: 808h</i> */
++	volatile uint32_t dsts;
++	/** Reserved. <i>Offset: 80Ch</i> */
++	uint32_t unused;
++	/** Device IN Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 810h</i> */
++	volatile uint32_t diepmsk;
++	/** Device OUT Endpoint Common Interrupt Mask
++	 * Register. <i>Offset: 814h</i> */
++	volatile uint32_t doepmsk;
++	/** Device All Endpoints Interrupt Register.  <i>Offset: 818h</i> */
++	volatile uint32_t daint;
++	/** Device All Endpoints Interrupt Mask Register.  <i>Offset:
++	 * 81Ch</i> */
++	volatile uint32_t daintmsk;
++	/** Device IN Token Queue Read Register-1 (Read Only).
++	 * <i>Offset: 820h</i> */
++	volatile uint32_t dtknqr1;
++	/** Device IN Token Queue Read Register-2 (Read Only).
++	 * <i>Offset: 824h</i> */
++	volatile uint32_t dtknqr2;
++	/** Device VBUS	 discharge Register.  <i>Offset: 828h</i> */
++	volatile uint32_t dvbusdis;
++	/** Device VBUS Pulse Register.	 <i>Offset: 82Ch</i> */
++	volatile uint32_t dvbuspulse;
++	/** Device IN Token Queue Read Register-3 (Read Only). /
++	 *	Device Thresholding control register (Read/Write)
++	 * <i>Offset: 830h</i> */
++	volatile uint32_t dtknqr3_dthrctl;
++	/** Device IN Token Queue Read Register-4 (Read Only). /
++	 *	Device IN EPs empty Inr. Mask Register (Read/Write)
++	 * <i>Offset: 834h</i> */
++	volatile uint32_t dtknqr4_fifoemptymsk;
++	/** Device Each Endpoint Interrupt Register (Read Only). /
++	 * <i>Offset: 838h</i> */
++	volatile uint32_t deachint;
++	/** Device Each Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 83Ch</i> */
++	volatile uint32_t deachintmsk;
++	/** Device Each In Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 840h</i> */
++	volatile uint32_t diepeachintmsk[MAX_EPS_CHANNELS];
++	/** Device Each Out Endpoint Interrupt mask Register (Read/Write). /
++	 * <i>Offset: 880h</i> */
++	volatile uint32_t doepeachintmsk[MAX_EPS_CHANNELS];
++} dwc_otg_device_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Device Configuration
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.  Write the
++ * <i>d32</i> member to the dcfg register.
++ */
++typedef union dcfg_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Device Speed */
++		unsigned devspd:2;
++		/** Non Zero Length Status OUT Handshake */
++		unsigned nzstsouthshk:1;
++#define DWC_DCFG_SEND_STALL 1
++
++		unsigned ena32khzs:1;
++		/** Device Addresses */
++		unsigned devaddr:7;
++		/** Periodic Frame Interval */
++		unsigned perfrint:2;
++#define DWC_DCFG_FRAME_INTERVAL_80 0
++#define DWC_DCFG_FRAME_INTERVAL_85 1
++#define DWC_DCFG_FRAME_INTERVAL_90 2
++#define DWC_DCFG_FRAME_INTERVAL_95 3
++
++		/** Enable Device OUT NAK for bulk in DDMA mode */
++		unsigned endevoutnak:1;
++
++		unsigned reserved14_17:4;
++		/** In Endpoint Mis-match count */
++		unsigned epmscnt:5;
++		/** Enable Descriptor DMA in Device mode */
++		unsigned descdma:1;
++		unsigned perschintvl:2;
++		unsigned resvalid:6;
++	} b;
++} dcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Device Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Remote Wakeup */
++		unsigned rmtwkupsig:1;
++		/** Soft Disconnect */
++		unsigned sftdiscon:1;
++		/** Global Non-Periodic IN NAK Status */
++		unsigned gnpinnaksts:1;
++		/** Global OUT NAK Status */
++		unsigned goutnaksts:1;
++		/** Test Control */
++		unsigned tstctl:3;
++		/** Set Global Non-Periodic IN NAK */
++		unsigned sgnpinnak:1;
++		/** Clear Global Non-Periodic IN NAK */
++		unsigned cgnpinnak:1;
++		/** Set Global OUT NAK */
++		unsigned sgoutnak:1;
++		/** Clear Global OUT NAK */
++		unsigned cgoutnak:1;
++		/** Power-On Programming Done */
++		unsigned pwronprgdone:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Global Multi Count */
++		unsigned gmc:2;
++		/** Ignore Frame Number for ISOC EPs */
++		unsigned ifrmnum:1;
++		/** NAK on Babble */
++		unsigned nakonbble:1;
++		/** Enable Continue on BNA */
++		unsigned encontonbna:1;
++
++		unsigned reserved18_31:14;
++	} b;
++} dctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device Status
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union dsts_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Suspend Status */
++		unsigned suspsts:1;
++		/** Enumerated Speed */
++		unsigned enumspd:2;
++#define DWC_DSTS_ENUMSPD_HS_PHY_30MHZ_OR_60MHZ 0
++#define DWC_DSTS_ENUMSPD_FS_PHY_30MHZ_OR_60MHZ 1
++#define DWC_DSTS_ENUMSPD_LS_PHY_6MHZ		   2
++#define DWC_DSTS_ENUMSPD_FS_PHY_48MHZ		   3
++		/** Erratic Error */
++		unsigned errticerr:1;
++		unsigned reserved4_7:4;
++		/** Frame or Microframe Number of the received SOF */
++		unsigned soffn:14;
++		unsigned reserved22_31:10;
++	} b;
++} dsts_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP Interrupt
++ * Register and the Device IN EP Common Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union diepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete mask */
++		unsigned xfercompl:1;
++		/** Endpoint disable mask */
++		unsigned epdisabled:1;
++		/** AHB Error mask */
++		unsigned ahberr:1;
++		/** TimeOUT Handshake mask (non-ISOC EPs) */
++		unsigned timeout:1;
++		/** IN Token received with TxF Empty mask */
++		unsigned intktxfemp:1;
++		/** IN Token Received with EP mismatch mask */
++		unsigned intknepmis:1;
++		/** IN Endpoint NAK Effective mask */
++		unsigned inepnakeff:1;
++		/** Reserved */
++		unsigned emptyintr:1;
++
++		unsigned txfifoundrn:1;
++
++		/** BNA Interrupt mask */
++		unsigned bna:1;
++
++		unsigned reserved10_12:3;
++		/** BNA Interrupt mask */
++		unsigned nak:1;
++
++		unsigned reserved14_31:18;
++	} b;
++} diepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union diepint_data diepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP Interrupt
++ * Registerand Device OUT EP Common Interrupt Mask Register.
++ *
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union doepint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer complete */
++		unsigned xfercompl:1;
++		/** Endpoint disable  */
++		unsigned epdisabled:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** Setup Phase Done (contorl EPs) */
++		unsigned setup:1;
++		/** OUT Token Received when Endpoint Disabled */
++		unsigned outtknepdis:1;
++
++		unsigned stsphsercvd:1;
++		/** Back-to-Back SETUP Packets Received */
++		unsigned back2backsetup:1;
++
++		unsigned reserved7:1;
++		/** OUT packet Error */
++		unsigned outpkterr:1;
++		/** BNA Interrupt */
++		unsigned bna:1;
++
++		unsigned reserved10:1;
++		/** Packet Drop Status */
++		unsigned pktdrpsts:1;
++		/** Babble Interrupt */
++		unsigned babble:1;
++		/** NAK Interrupt */
++		unsigned nak:1;
++		/** NYET Interrupt */
++		unsigned nyet:1;
++		/** Bit indicating setup packet received */
++		unsigned sr:1;
++
++		unsigned reserved16_31:16;
++	} b;
++} doepint_data_t;
++
++/**
++ * This union represents the bit fields in the Device OUT EP
++ * Common/Dedicated Interrupt Mask Register.
++ */
++typedef union doepint_data doepmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Device All EP Interrupt
++ * and Mask Registers.
++ * - Read the register into the <i>d32</i> member then set/clear the
++ *	 bits using the <i>b</i>it elements.
++ */
++typedef union daint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** IN Endpoint bits */
++		unsigned in:16;
++		/** OUT Endpoint bits */
++		unsigned out:16;
++	} ep;
++	struct {
++		/** IN Endpoint bits */
++		unsigned inep0:1;
++		unsigned inep1:1;
++		unsigned inep2:1;
++		unsigned inep3:1;
++		unsigned inep4:1;
++		unsigned inep5:1;
++		unsigned inep6:1;
++		unsigned inep7:1;
++		unsigned inep8:1;
++		unsigned inep9:1;
++		unsigned inep10:1;
++		unsigned inep11:1;
++		unsigned inep12:1;
++		unsigned inep13:1;
++		unsigned inep14:1;
++		unsigned inep15:1;
++		/** OUT Endpoint bits */
++		unsigned outep0:1;
++		unsigned outep1:1;
++		unsigned outep2:1;
++		unsigned outep3:1;
++		unsigned outep4:1;
++		unsigned outep5:1;
++		unsigned outep6:1;
++		unsigned outep7:1;
++		unsigned outep8:1;
++		unsigned outep9:1;
++		unsigned outep10:1;
++		unsigned outep11:1;
++		unsigned outep12:1;
++		unsigned outep13:1;
++		unsigned outep14:1;
++		unsigned outep15:1;
++	} b;
++} daint_data_t;
++
++/**
++ * This union represents the bit fields in the Device IN Token Queue
++ * Read Registers.
++ * - Read the register into the <i>d32</i> member.
++ * - READ-ONLY Register
++ */
++typedef union dtknq1_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** In Token Queue Write Pointer */
++		unsigned intknwptr:5;
++		/** Reserved */
++		unsigned reserved05_06:2;
++		/** write pointer has wrapped. */
++		unsigned wrap_bit:1;
++		/** EP Numbers of IN Tokens 0 ... 4 */
++		unsigned epnums0_5:24;
++	} b;
++} dtknq1_data_t;
++
++/**
++ * This union represents Threshold control Register
++ * - Read and write the register into the <i>d32</i> member.
++ * - READ-WRITABLE Register
++ */
++typedef union dthrctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** non ISO Tx Thr. Enable */
++		unsigned non_iso_thr_en:1;
++		/** ISO Tx Thr. Enable */
++		unsigned iso_thr_en:1;
++		/** Tx Thr. Length */
++		unsigned tx_thr_len:9;
++		/** AHB Threshold ratio */
++		unsigned ahb_thr_ratio:2;
++		/** Reserved */
++		unsigned reserved13_15:3;
++		/** Rx Thr. Enable */
++		unsigned rx_thr_en:1;
++		/** Rx Thr. Length */
++		unsigned rx_thr_len:9;
++		unsigned reserved26:1;
++		/** Arbiter Parking Enable*/
++		unsigned arbprken:1;
++		/** Reserved */
++		unsigned reserved28_31:4;
++	} b;
++} dthrctl_data_t;
++
++/**
++ * Device Logical IN Endpoint-Specific Registers. <i>Offsets
++ * 900h-AFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_in_ep_regs {
++	/** Device IN Endpoint Control Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t diepctl;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device IN Endpoint Interrupt Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t diepint;
++	/** Reserved. <i>Offset:900h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device IN Endpoint Transfer Size
++	 * Register. <i>Offset:900h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t dieptsiz;
++	/** Device IN Endpoint DMA Address Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 14h</i> */
++	volatile uint32_t diepdma;
++	/** Device IN Endpoint Transmit FIFO Status Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 18h</i> */
++	volatile uint32_t dtxfsts;
++	/** Device IN Endpoint DMA Buffer Register. <i>Offset:900h +
++	 * (ep_num * 20h) + 1Ch</i> */
++	volatile uint32_t diepdmab;
++} dwc_otg_dev_in_ep_regs_t;
++
++/**
++ * Device Logical OUT Endpoint-Specific Registers. <i>Offsets:
++ * B00h-CFCh</i>
++ *
++ * There will be one set of endpoint registers per logical endpoint
++ * implemented.
++ *
++ * <i>These registers are visible only in Device mode and must not be
++ * accessed in Host mode, as the results are unknown.</i>
++ */
++typedef struct dwc_otg_dev_out_ep_regs {
++	/** Device OUT Endpoint Control Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 00h</i> */
++	volatile uint32_t doepctl;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 04h</i> */
++	uint32_t reserved04;
++	/** Device OUT Endpoint Interrupt Register. <i>Offset:B00h +
++	 * (ep_num * 20h) + 08h</i> */
++	volatile uint32_t doepint;
++	/** Reserved. <i>Offset:B00h + (ep_num * 20h) + 0Ch</i> */
++	uint32_t reserved0C;
++	/** Device OUT Endpoint Transfer Size Register. <i>Offset:
++	 * B00h + (ep_num * 20h) + 10h</i> */
++	volatile uint32_t doeptsiz;
++	/** Device OUT Endpoint DMA Address Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 14h</i> */
++	volatile uint32_t doepdma;
++	/** Reserved. <i>Offset:B00h + 	 * (ep_num * 20h) + 18h</i> */
++	uint32_t unused;
++	/** Device OUT Endpoint DMA Buffer Register. <i>Offset:B00h
++	 * + (ep_num * 20h) + 1Ch</i> */
++	uint32_t doepdmab;
++} dwc_otg_dev_out_ep_regs_t;
++
++/**
++ * This union represents the bit fields in the Device EP Control
++ * Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union depctl_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Maximum Packet Size
++		 * IN/OUT EPn
++		 * IN/OUT EP0 - 2 bits
++		 *	 2'b00: 64 Bytes
++		 *	 2'b01: 32
++		 *	 2'b10: 16
++		 *	 2'b11: 8 */
++		unsigned mps:11;
++#define DWC_DEP0CTL_MPS_64	 0
++#define DWC_DEP0CTL_MPS_32	 1
++#define DWC_DEP0CTL_MPS_16	 2
++#define DWC_DEP0CTL_MPS_8	 3
++
++		/** Next Endpoint
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned nextep:4;
++
++		/** USB Active Endpoint */
++		unsigned usbactep:1;
++
++		/** Endpoint DPID (INTR/Bulk IN and OUT endpoints)
++		 * This field contains the PID of the packet going to
++		 * be received or transmitted on this endpoint. The
++		 * application should program the PID of the first
++		 * packet going to be received or transmitted on this
++		 * endpoint , after the endpoint is
++		 * activated. Application use the SetD1PID and
++		 * SetD0PID fields of this register to program either
++		 * D0 or D1 PID.
++		 *
++		 * The encoding for this field is
++		 *	 - 0: D0
++		 *	 - 1: D1
++		 */
++		unsigned dpid:1;
++
++		/** NAK Status */
++		unsigned naksts:1;
++
++		/** Endpoint Type
++		 *	2'b00: Control
++		 *	2'b01: Isochronous
++		 *	2'b10: Bulk
++		 *	2'b11: Interrupt */
++		unsigned eptype:2;
++
++		/** Snoop Mode
++		 * OUT EPn/OUT EP0
++		 * IN EPn/IN EP0 - reserved */
++		unsigned snp:1;
++
++		/** Stall Handshake */
++		unsigned stall:1;
++
++		/** Tx Fifo Number
++		 * IN EPn/IN EP0
++		 * OUT EPn/OUT EP0 - reserved */
++		unsigned txfnum:4;
++
++		/** Clear NAK */
++		unsigned cnak:1;
++		/** Set NAK */
++		unsigned snak:1;
++		/** Set DATA0 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA0. Set Even
++		 * (micro)frame (SetEvenFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to even (micro)
++		 * frame.
++		 */
++		unsigned setd0pid:1;
++		/** Set DATA1 PID (INTR/Bulk IN and OUT endpoints)
++		 * Writing to this field sets the Endpoint DPID (DPID)
++		 * field in this register to DATA1 Set Odd
++		 * (micro)frame (SetOddFr) (ISO IN and OUT Endpoints)
++		 * Writing to this field sets the Even/Odd
++		 * (micro)frame (EO_FrNum) field to odd (micro) frame.
++		 */
++		unsigned setd1pid:1;
++
++		/** Endpoint Disable */
++		unsigned epdis:1;
++		/** Endpoint Enable */
++		unsigned epena:1;
++	} b;
++} depctl_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:19;
++/** Max packet count for EP (pow(2,10)-1) */
++#define MAX_PKT_CNT 1023
++		/** Packet Count */
++		unsigned pktcnt:10;
++		/** Multi Count - Periodic IN endpoints */
++		unsigned mc:2;
++		unsigned reserved:1;
++	} b;
++} deptsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Device EP 0 Transfer
++ * Size Register.  Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union deptsiz0_data {
++		/** raw register data */
++	uint32_t d32;
++		/** register bits */
++	struct {
++		/** Transfer size */
++		unsigned xfersize:7;
++				/** Reserved */
++		unsigned reserved7_18:12;
++		/** Packet Count */
++		unsigned pktcnt:2;
++				/** Reserved */
++		unsigned reserved21_28:8;
++				/**Setup Packet Count (DOEPTSIZ0 Only) */
++		unsigned supcnt:2;
++		unsigned reserved31;
++	} b;
++} deptsiz0_data_t;
++
++/////////////////////////////////////////////////
++// DMA Descriptor Specific Structures
++//
++
++/** Buffer status definitions */
++
++#define BS_HOST_READY	0x0
++#define BS_DMA_BUSY		0x1
++#define BS_DMA_DONE		0x2
++#define BS_HOST_BUSY	0x3
++
++/** Receive/Transmit status definitions */
++
++#define RTS_SUCCESS		0x0
++#define RTS_BUFFLUSH	0x1
++#define RTS_RESERVED	0x2
++#define RTS_BUFERR		0x3
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it, <i>b_iso_out</i> and
++ * <i>b_iso_in</i> elements.
++ */
++typedef union dev_dma_desc_sts {
++		/** raw register data */
++	uint32_t d32;
++		/** quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned bytes:16;
++		/** NAK bit - only for OUT EPs */
++		unsigned nak:1;
++		unsigned reserved17_22:6;
++		/** Multiple Transfer - only for OUT EPs */
++		unsigned mtrf:1;
++		/** Setup Packet received - only for OUT EPs */
++		unsigned sr:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned sts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b;
++
++//#ifdef DWC_EN_ISOC
++		/** iso out quadlet bits */
++	struct {
++		/** Received number of bytes */
++		unsigned rxbytes:11;
++
++		unsigned reserved11:1;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Received ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Receive Status */
++		unsigned rxsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_out;
++
++		/** iso in quadlet bits */
++	struct {
++		/** Transmited number of bytes */
++		unsigned txbytes:12;
++		/** Frame Number */
++		unsigned framenum:11;
++		/** Transmited ISO Data PID */
++		unsigned pid:2;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** Short Packet */
++		unsigned sp:1;
++		/** Last */
++		unsigned l:1;
++		/** Transmit Status */
++		unsigned txsts:2;
++		/** Buffer Status */
++		unsigned bs:2;
++	} b_iso_in;
++//#endif                                /* DWC_EN_ISOC */
++} dev_dma_desc_sts_t;
++
++/**
++ * DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_dev_dma_desc {
++	/** DMA Descriptor status quadlet */
++	dev_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_dev_dma_desc_t;
++
++/**
++ * The dwc_otg_dev_if structure contains information needed to manage
++ * the DWC_otg controller acting in device mode. It represents the
++ * programming view of the device-specific aspects of the controller.
++ */
++typedef struct dwc_otg_dev_if {
++	/** Pointer to device Global registers.
++	 * Device Global Registers starting at offset 800h
++	 */
++	dwc_otg_device_global_regs_t *dev_global_regs;
++#define DWC_DEV_GLOBAL_REG_OFFSET 0x800
++
++	/**
++	 * Device Logical IN Endpoint-Specific Registers 900h-AFCh
++	 */
++	dwc_otg_dev_in_ep_regs_t *in_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_IN_EP_REG_OFFSET 0x900
++#define DWC_EP_REG_OFFSET 0x20
++
++	/** Device Logical OUT Endpoint-Specific Registers B00h-CFCh */
++	dwc_otg_dev_out_ep_regs_t *out_ep_regs[MAX_EPS_CHANNELS];
++#define DWC_DEV_OUT_EP_REG_OFFSET 0xB00
++
++	/* Device configuration information */
++	uint8_t speed;				 /**< Device Speed	0: Unknown, 1: LS, 2:FS, 3: HS */
++	uint8_t num_in_eps;		 /**< Number # of Tx EP range: 0-15 exept ep0 */
++	uint8_t num_out_eps;		 /**< Number # of Rx EP range: 0-15 exept ep 0*/
++
++	/** Size of periodic FIFOs (Bytes) */
++	uint16_t perio_tx_fifo_size[MAX_PERIO_FIFOS];
++
++	/** Size of Tx FIFOs (Bytes) */
++	uint16_t tx_fifo_size[MAX_TX_FIFOS];
++
++	/** Thresholding enable flags and length varaiables **/
++	uint16_t rx_thr_en;
++	uint16_t iso_tx_thr_en;
++	uint16_t non_iso_tx_thr_en;
++
++	uint16_t rx_thr_length;
++	uint16_t tx_thr_length;
++
++	/**
++	 * Pointers to the DMA Descriptors for EP0 Control
++	 * transfers (virtual and physical)
++	 */
++
++	/** 2 descriptors for SETUP packets */
++	dwc_dma_t dma_setup_desc_addr[2];
++	dwc_otg_dev_dma_desc_t *setup_desc_addr[2];
++
++	/** Pointer to Descriptor with latest SETUP packet */
++	dwc_otg_dev_dma_desc_t *psetup;
++
++	/** Index of current SETUP handler descriptor */
++	uint32_t setup_desc_index;
++
++	/** Descriptor for Data In or Status In phases */
++	dwc_dma_t dma_in_desc_addr;
++	dwc_otg_dev_dma_desc_t *in_desc_addr;
++
++	/** Descriptor for Data Out or Status Out phases */
++	dwc_dma_t dma_out_desc_addr;
++	dwc_otg_dev_dma_desc_t *out_desc_addr;
++
++	/** Setup Packet Detected - if set clear NAK when queueing */
++	uint32_t spd;
++	/** Isoc ep pointer on which incomplete happens */
++	void *isoc_ep;
++
++} dwc_otg_dev_if_t;
++
++/////////////////////////////////////////////////
++// Host Mode Register Structures
++//
++/**
++ * The Host Global Registers structure defines the size and relative
++ * field offsets for the Host Mode Global Registers.  Host Global
++ * Registers offsets 400h-7FFh.
++*/
++typedef struct dwc_otg_host_global_regs {
++	/** Host Configuration Register.   <i>Offset: 400h</i> */
++	volatile uint32_t hcfg;
++	/** Host Frame Interval Register.	<i>Offset: 404h</i> */
++	volatile uint32_t hfir;
++	/** Host Frame Number / Frame Remaining Register. <i>Offset: 408h</i> */
++	volatile uint32_t hfnum;
++	/** Reserved.	<i>Offset: 40Ch</i> */
++	uint32_t reserved40C;
++	/** Host Periodic Transmit FIFO/ Queue Status Register. <i>Offset: 410h</i> */
++	volatile uint32_t hptxsts;
++	/** Host All Channels Interrupt Register. <i>Offset: 414h</i> */
++	volatile uint32_t haint;
++	/** Host All Channels Interrupt Mask Register. <i>Offset: 418h</i> */
++	volatile uint32_t haintmsk;
++	/** Host Frame List Base Address Register . <i>Offset: 41Ch</i> */
++	volatile uint32_t hflbaddr;
++} dwc_otg_host_global_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Configuration Register.
++ * Read the register into the <i>d32</i> member then set/clear the bits using
++ * the <i>b</i>it elements. Write the <i>d32</i> member to the hcfg register.
++ */
++typedef union hcfg_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** FS/LS Phy Clock Select */
++		unsigned fslspclksel:2;
++#define DWC_HCFG_30_60_MHZ 0
++#define DWC_HCFG_48_MHZ	   1
++#define DWC_HCFG_6_MHZ	   2
++
++		/** FS/LS Only Support */
++		unsigned fslssupp:1;
++		unsigned reserved3_6:4;
++		/** Enable 32-KHz Suspend Mode */
++		unsigned ena32khzs:1;
++		/** Resume Validation Periiod */
++		unsigned resvalid:8;
++		unsigned reserved16_22:7;
++		/** Enable Scatter/gather DMA in Host mode */
++		unsigned descdma:1;
++		/** Frame List Entries */
++		unsigned frlisten:2;
++		/** Enable Periodic Scheduling */
++		unsigned perschedena:1;
++		unsigned reserved27_30:4;
++		unsigned modechtimen:1;
++	} b;
++} hcfg_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfir_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frint:16;
++		unsigned hfirrldctrl:1;
++		unsigned reserved:15;
++	} b;
++} hfir_data_t;
++
++/**
++ * This union represents the bit fields in the Host Frame Remaing/Number
++ * Register.
++ */
++typedef union hfnum_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned frnum:16;
++#define DWC_HFNUM_MAX_FRNUM 0x3FFF
++		unsigned frrem:16;
++	} b;
++} hfnum_data_t;
++
++typedef union hptxsts_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned ptxfspcavail:16;
++		unsigned ptxqspcavail:8;
++		/** Top of the Periodic Transmit Request Queue
++		 *	- bit 24 - Terminate (last entry for the selected channel)
++		 *	- bits 26:25 - Token Type
++		 *	  - 2'b00 - Zero length
++		 *	  - 2'b01 - Ping
++		 *	  - 2'b10 - Disable
++		 *	- bits 30:27 - Channel Number
++		 *	- bit 31 - Odd/even microframe
++		 */
++		unsigned ptxqtop_terminate:1;
++		unsigned ptxqtop_token:2;
++		unsigned ptxqtop_chnum:4;
++		unsigned ptxqtop_odd:1;
++	} b;
++} hptxsts_data_t;
++
++/**
++ * This union represents the bit fields in the Host Port Control and Status
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hprt0 register.
++ */
++typedef union hprt0_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned prtconnsts:1;
++		unsigned prtconndet:1;
++		unsigned prtena:1;
++		unsigned prtenchng:1;
++		unsigned prtovrcurract:1;
++		unsigned prtovrcurrchng:1;
++		unsigned prtres:1;
++		unsigned prtsusp:1;
++		unsigned prtrst:1;
++		unsigned reserved9:1;
++		unsigned prtlnsts:2;
++		unsigned prtpwr:1;
++		unsigned prttstctl:4;
++		unsigned prtspd:2;
++#define DWC_HPRT0_PRTSPD_HIGH_SPEED 0
++#define DWC_HPRT0_PRTSPD_FULL_SPEED 1
++#define DWC_HPRT0_PRTSPD_LOW_SPEED	2
++		unsigned reserved19_31:13;
++	} b;
++} hprt0_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haint_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union haintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned ch0:1;
++		unsigned ch1:1;
++		unsigned ch2:1;
++		unsigned ch3:1;
++		unsigned ch4:1;
++		unsigned ch5:1;
++		unsigned ch6:1;
++		unsigned ch7:1;
++		unsigned ch8:1;
++		unsigned ch9:1;
++		unsigned ch10:1;
++		unsigned ch11:1;
++		unsigned ch12:1;
++		unsigned ch13:1;
++		unsigned ch14:1;
++		unsigned ch15:1;
++		unsigned reserved:16;
++	} b;
++
++	struct {
++		unsigned chint:16;
++		unsigned reserved:16;
++	} b2;
++} haintmsk_data_t;
++
++/**
++ * Host Channel Specific Registers. <i>500h-5FCh</i>
++ */
++typedef struct dwc_otg_hc_regs {
++	/** Host Channel 0 Characteristic Register. <i>Offset: 500h + (chan_num * 20h) + 00h</i> */
++	volatile uint32_t hcchar;
++	/** Host Channel 0 Split Control Register. <i>Offset: 500h + (chan_num * 20h) + 04h</i> */
++	volatile uint32_t hcsplt;
++	/** Host Channel 0 Interrupt Register. <i>Offset: 500h + (chan_num * 20h) + 08h</i> */
++	volatile uint32_t hcint;
++	/** Host Channel 0 Interrupt Mask Register. <i>Offset: 500h + (chan_num * 20h) + 0Ch</i> */
++	volatile uint32_t hcintmsk;
++	/** Host Channel 0 Transfer Size Register. <i>Offset: 500h + (chan_num * 20h) + 10h</i> */
++	volatile uint32_t hctsiz;
++	/** Host Channel 0 DMA Address Register. <i>Offset: 500h + (chan_num * 20h) + 14h</i> */
++	volatile uint32_t hcdma;
++	volatile uint32_t reserved;
++	/** Host Channel 0 DMA Buffer Address Register. <i>Offset: 500h + (chan_num * 20h) + 1Ch</i> */
++	volatile uint32_t hcdmab;
++} dwc_otg_hc_regs_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Characteristics
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++typedef union hcchar_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Maximum packet size in bytes */
++		unsigned mps:11;
++
++		/** Endpoint number */
++		unsigned epnum:4;
++
++		/** 0: OUT, 1: IN */
++		unsigned epdir:1;
++
++		unsigned reserved:1;
++
++		/** 0: Full/high speed device, 1: Low speed device */
++		unsigned lspddev:1;
++
++		/** 0: Control, 1: Isoc, 2: Bulk, 3: Intr */
++		unsigned eptype:2;
++
++		/** Packets per frame for periodic transfers. 0 is reserved. */
++		unsigned multicnt:2;
++
++		/** Device address */
++		unsigned devaddr:7;
++
++		/**
++		 * Frame to transmit periodic transaction.
++		 * 0: even, 1: odd
++		 */
++		unsigned oddfrm:1;
++
++		/** Channel disable */
++		unsigned chdis:1;
++
++		/** Channel enable */
++		unsigned chen:1;
++	} b;
++} hcchar_data_t;
++
++typedef union hcsplt_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Port Address */
++		unsigned prtaddr:7;
++
++		/** Hub Address */
++		unsigned hubaddr:7;
++
++		/** Transaction Position */
++		unsigned xactpos:2;
++#define DWC_HCSPLIT_XACTPOS_MID 0
++#define DWC_HCSPLIT_XACTPOS_END 1
++#define DWC_HCSPLIT_XACTPOS_BEGIN 2
++#define DWC_HCSPLIT_XACTPOS_ALL 3
++
++		/** Do Complete Split */
++		unsigned compsplt:1;
++
++		/** Reserved */
++		unsigned reserved:14;
++
++		/** Split Enble */
++		unsigned spltena:1;
++	} b;
++} hcsplt_data_t;
++
++/**
++ * This union represents the bit fields in the Host All Interrupt
++ * Register.
++ */
++typedef union hcint_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** Transfer Complete */
++		unsigned xfercomp:1;
++		/** Channel Halted */
++		unsigned chhltd:1;
++		/** AHB Error */
++		unsigned ahberr:1;
++		/** STALL Response Received */
++		unsigned stall:1;
++		/** NAK Response Received */
++		unsigned nak:1;
++		/** ACK Response Received */
++		unsigned ack:1;
++		/** NYET Response Received */
++		unsigned nyet:1;
++		/** Transaction Err */
++		unsigned xacterr:1;
++		/** Babble Error */
++		unsigned bblerr:1;
++		/** Frame Overrun */
++		unsigned frmovrun:1;
++		/** Data Toggle Error */
++		unsigned datatglerr:1;
++		/** Buffer Not Available (only for DDMA mode) */
++		unsigned bna:1;
++		/** Exessive transaction error (only for DDMA mode) */
++		unsigned xcs_xact:1;
++		/** Frame List Rollover interrupt */
++		unsigned frm_list_roll:1;
++		/** Reserved */
++		unsigned reserved14_31:18;
++	} b;
++} hcint_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Interrupt Mask
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcintmsk register.
++ */
++typedef union hcintmsk_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		unsigned xfercompl:1;
++		unsigned chhltd:1;
++		unsigned ahberr:1;
++		unsigned stall:1;
++		unsigned nak:1;
++		unsigned ack:1;
++		unsigned nyet:1;
++		unsigned xacterr:1;
++		unsigned bblerr:1;
++		unsigned frmovrun:1;
++		unsigned datatglerr:1;
++		unsigned bna:1;
++		unsigned xcs_xact:1;
++		unsigned frm_list_roll:1;
++		unsigned reserved14_31:18;
++	} b;
++} hcintmsk_data_t;
++
++/**
++ * This union represents the bit fields in the Host Channel Transfer Size
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements. Write the <i>d32</i> member to the
++ * hcchar register.
++ */
++
++typedef union hctsiz_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Total transfer size in bytes */
++		unsigned xfersize:19;
++
++		/** Data packets to transfer */
++		unsigned pktcnt:10;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control), SETUP (Control)
++		 */
++		unsigned pid:2;
++#define DWC_HCTSIZ_DATA0 0
++#define DWC_HCTSIZ_DATA1 2
++#define DWC_HCTSIZ_DATA2 1
++#define DWC_HCTSIZ_MDATA 3
++#define DWC_HCTSIZ_SETUP 3
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b;
++
++	/** register bits */
++	struct {
++		/** Scheduling information */
++		unsigned schinfo:8;
++
++		/** Number of transfer descriptors.
++		 * Max value:
++		 * 64 in general,
++		 * 256 only for HS isochronous endpoint.
++		 */
++		unsigned ntd:8;
++
++		/** Data packets to transfer */
++		unsigned reserved16_28:13;
++
++		/**
++		 * Packet ID for next data packet
++		 * 0: DATA0
++		 * 1: DATA2
++		 * 2: DATA1
++		 * 3: MDATA (non-Control)
++		 */
++		unsigned pid:2;
++
++		/** Do PING protocol when 1 */
++		unsigned dopng:1;
++	} b_ddma;
++} hctsiz_data_t;
++
++/**
++ * This union represents the bit fields in the Host DMA Address
++ * Register used in Descriptor DMA mode.
++ */
++typedef union hcdma_data {
++	/** raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		unsigned reserved0_2:3;
++		/** Current Transfer Descriptor. Not used for ISOC */
++		unsigned ctd:8;
++		/** Start Address of Descriptor List */
++		unsigned dma_addr:21;
++	} b;
++} hcdma_data_t;
++
++/**
++ * This union represents the bit fields in the DMA Descriptor
++ * status quadlet for host mode. Read the quadlet into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union host_dma_desc_sts {
++	/** raw register data */
++	uint32_t d32;
++	/** quadlet bits */
++
++	/* for non-isochronous  */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:17;
++		/** QTD offset to jump when Short Packet received - only for IN EPs */
++		unsigned qtd_offset:6;
++		/**
++		 * Set to request the core to jump to alternate QTD if
++		 * Short Packet received - only for IN EPs
++		 */
++		unsigned a_qtd:1;
++		 /**
++		  * Setup Packet bit. When set indicates that buffer contains
++		  * setup packet.
++		  */
++		unsigned sup:1;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		/** End of List */
++		unsigned eol:1;
++		unsigned reserved27:1;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++#define DMA_DESC_STS_PKTERR	1
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b;
++	/* for isochronous */
++	struct {
++		/** Number of bytes */
++		unsigned n_bytes:12;
++		unsigned reserved12_24:13;
++		/** Interrupt On Complete */
++		unsigned ioc:1;
++		unsigned reserved26_27:2;
++		/** Rx/Tx Status */
++		unsigned sts:2;
++		unsigned reserved30:1;
++		/** Active Bit */
++		unsigned a:1;
++	} b_isoc;
++} host_dma_desc_sts_t;
++
++#define	MAX_DMA_DESC_SIZE		131071
++#define MAX_DMA_DESC_NUM_GENERIC	64
++#define MAX_DMA_DESC_NUM_HS_ISOC	256
++#define MAX_FRLIST_EN_NUM		64
++/**
++ * Host-mode DMA Descriptor structure
++ *
++ * DMA Descriptor structure contains two quadlets:
++ * Status quadlet and Data buffer pointer.
++ */
++typedef struct dwc_otg_host_dma_desc {
++	/** DMA Descriptor status quadlet */
++	host_dma_desc_sts_t status;
++	/** DMA Descriptor data buffer pointer */
++	uint32_t buf;
++} dwc_otg_host_dma_desc_t;
++
++/** OTG Host Interface Structure.
++ *
++ * The OTG Host Interface Structure structure contains information
++ * needed to manage the DWC_otg controller acting in host mode. It
++ * represents the programming view of the host-specific aspects of the
++ * controller.
++ */
++typedef struct dwc_otg_host_if {
++	/** Host Global Registers starting at offset 400h.*/
++	dwc_otg_host_global_regs_t *host_global_regs;
++#define DWC_OTG_HOST_GLOBAL_REG_OFFSET 0x400
++
++	/** Host Port 0 Control and Status Register */
++	volatile uint32_t *hprt0;
++#define DWC_OTG_HOST_PORT_REGS_OFFSET 0x440
++
++	/** Host Channel Specific Registers at offsets 500h-5FCh. */
++	dwc_otg_hc_regs_t *hc_regs[MAX_EPS_CHANNELS];
++#define DWC_OTG_HOST_CHAN_REGS_OFFSET 0x500
++#define DWC_OTG_CHAN_REGS_OFFSET 0x20
++
++	/* Host configuration information */
++	/** Number of Host Channels (range: 1-16) */
++	uint8_t num_host_channels;
++	/** Periodic EPs supported (0: no, 1: yes) */
++	uint8_t perio_eps_supported;
++	/** Periodic Tx FIFO Size (Only 1 host periodic Tx FIFO) */
++	uint16_t perio_tx_fifo_size;
++
++} dwc_otg_host_if_t;
++
++/**
++ * This union represents the bit fields in the Power and Clock Gating Control
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union pcgcctl_data {
++	/** raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** Stop Pclk */
++		unsigned stoppclk:1;
++		/** Gate Hclk */
++		unsigned gatehclk:1;
++		/** Power Clamp */
++		unsigned pwrclmp:1;
++		/** Reset Power Down Modules */
++		unsigned rstpdwnmodule:1;
++		/** Reserved */
++		unsigned reserved:1;
++		/** Enable Sleep Clock Gating (Enbl_L1Gating) */
++		unsigned enbl_sleep_gating:1;
++		/** PHY In Sleep (PhySleep) */
++		unsigned phy_in_sleep:1;
++		/** Deep Sleep*/
++		unsigned deep_sleep:1;
++		unsigned resetaftsusp:1;
++		unsigned restoremode:1;
++		unsigned enbl_extnd_hiber:1;
++		unsigned extnd_hiber_pwrclmp:1;
++		unsigned extnd_hiber_switch:1;
++		unsigned ess_reg_restored:1;
++		unsigned prt_clk_sel:2;
++		unsigned port_power:1;
++		unsigned max_xcvrselect:2;
++		unsigned max_termsel:1;
++		unsigned mac_dev_addr:7;
++		unsigned p2hd_dev_enum_spd:2;
++		unsigned p2hd_prt_spd:2;
++		unsigned if_dev_mode:1;
++	} b;
++} pcgcctl_data_t;
++
++/**
++ * This union represents the bit fields in the Global Data FIFO Software
++ * Configuration Register. Read the register into the <i>d32</i> member then
++ * set/clear the bits using the <i>b</i>it elements.
++ */
++typedef union gdfifocfg_data {
++	/* raw register data */
++	uint32_t d32;
++	/** register bits */
++	struct {
++		/** OTG Data FIFO depth */
++		unsigned gdfifocfg:16;
++		/** Start address of EP info controller */
++		unsigned epinfobase:16;
++	} b;
++} gdfifocfg_data_t;
++
++/**
++ * This union represents the bit fields in the Global Power Down Register
++ * Register. Read the register into the <i>d32</i> member then set/clear the
++ * bits using the <i>b</i>it elements.
++ */
++typedef union gpwrdn_data {
++	/* raw register data */
++	uint32_t d32;
++
++	/** register bits */
++	struct {
++		/** PMU Interrupt Select */
++		unsigned pmuintsel:1;
++		/** PMU Active */
++		unsigned pmuactv:1;
++		/** Restore */
++		unsigned restore:1;
++		/** Power Down Clamp */
++		unsigned pwrdnclmp:1;
++		/** Power Down Reset */
++		unsigned pwrdnrstn:1;
++		/** Power Down Switch */
++		unsigned pwrdnswtch:1;
++		/** Disable VBUS */
++		unsigned dis_vbus:1;
++		/** Line State Change */
++		unsigned lnstschng:1;
++		/** Line state change mask */
++		unsigned lnstchng_msk:1;
++		/** Reset Detected */
++		unsigned rst_det:1;
++		/** Reset Detect mask */
++		unsigned rst_det_msk:1;
++		/** Disconnect Detected */
++		unsigned disconn_det:1;
++		/** Disconnect Detect mask */
++		unsigned disconn_det_msk:1;
++		/** Connect Detected*/
++		unsigned connect_det:1;
++		/** Connect Detected Mask*/
++		unsigned connect_det_msk:1;
++		/** SRP Detected */
++		unsigned srp_det:1;
++		/** SRP Detect mask */
++		unsigned srp_det_msk:1;
++		/** Status Change Interrupt */
++		unsigned sts_chngint:1;
++		/** Status Change Interrupt Mask */
++		unsigned sts_chngint_msk:1;
++		/** Line State */
++		unsigned linestate:2;
++		/** Indicates current mode(status of IDDIG signal) */
++		unsigned idsts:1;
++		/** B Session Valid signal status*/
++		unsigned bsessvld:1;
++		/** ADP Event Detected */
++		unsigned adp_int:1;
++		/** Multi Valued ID pin */
++		unsigned mult_val_id_bc:5;
++		/** Reserved 24_31 */
++		unsigned reserved29_31:3;
++	} b;
++} gpwrdn_data_t;
++
++#endif
+diff --git a/drivers/usb/host/dwc_otg/test/Makefile b/drivers/usb/host/dwc_otg/test/Makefile
+new file mode 100644
+index 0000000..fc45375
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/Makefile
+@@ -0,0 +1,16 @@
++
++PERL=/usr/bin/perl
++PL_TESTS=test_sysfs.pl test_mod_param.pl
++
++.PHONY : test
++test : perl_tests
++
++perl_tests :
++	@echo
++	@echo Running perl tests
++	@for test in $(PL_TESTS); do \
++	  if $(PERL) ./$$test ; then \
++	    echo "=======> $$test, PASSED" ; \
++	  else echo "=======> $$test, FAILED" ; \
++	  fi \
++	done
+diff --git a/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
+new file mode 100644
+index 0000000..85e55fd
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/dwc_otg_test.pm
+@@ -0,0 +1,337 @@
++package dwc_otg_test;
++
++use strict;
++use Exporter ();
++
++use vars qw(@ISA @EXPORT
++$sysfsdir $paramdir $errors $params
++);
++
++@ISA = qw(Exporter);
++
++#
++# Globals
++#
++$sysfsdir = "/sys/devices/lm0";
++$paramdir = "/sys/module/dwc_otg";
++$errors = 0;
++
++$params = [
++	   {
++	    NAME => "otg_cap",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   {
++	    NAME => "dma_enable",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "dma_burst_size",
++	    DEFAULT => 32,
++	    ENUM => [1, 4, 8, 16, 32, 64, 128, 256],
++	    LOW => 1,
++	    HIGH => 256
++	   },
++	   {
++	    NAME => "host_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "host_support_fs_ls_low_power",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "host_ls_low_power_phy_clk",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "dev_speed",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "enable_dynamic_fifo",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	   {
++	    NAME => "data_fifo_size",
++	    DEFAULT => 8192,
++	    ENUM => [],
++	    LOW => 32,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_rx_fifo_size",
++	    DEFAULT => 1064,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_1",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_2",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_3",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_4",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_5",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_6",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_7",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_8",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_9",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_10",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_11",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_12",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_13",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_14",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "dev_perio_tx_fifo_size_15",
++	    DEFAULT => 256,
++	    ENUM => [],
++	    LOW => 4,
++	    HIGH => 768
++	   },
++	   {
++	    NAME => "host_rx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "host_nperio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "host_perio_tx_fifo_size",
++	    DEFAULT => 1024,
++	    ENUM => [],
++	    LOW => 16,
++	    HIGH => 32768
++	   },
++	   {
++	    NAME => "max_transfer_size",
++	    DEFAULT => 65535,
++	    ENUM => [],
++	    LOW => 2047,
++	    HIGH => 65535
++	   },
++	   {
++	    NAME => "max_packet_count",
++	    DEFAULT => 511,
++	    ENUM => [],
++	    LOW => 15,
++	    HIGH => 511
++	   },
++	   {
++	    NAME => "host_channels",
++	    DEFAULT => 12,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 16
++	   },
++	   {
++	    NAME => "dev_endpoints",
++	    DEFAULT => 6,
++	    ENUM => [],
++	    LOW => 1,
++	    HIGH => 15
++	   },
++	   {
++	    NAME => "phy_type",
++	    DEFAULT => 1,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 2
++	   },
++	   {
++	    NAME => "phy_utmi_width",
++	    DEFAULT => 16,
++	    ENUM => [8, 16],
++	    LOW => 8,
++	    HIGH => 16
++	   },
++	   {
++	    NAME => "phy_ulpi_ddr",
++	    DEFAULT => 0,
++	    ENUM => [],
++	    LOW => 0,
++	    HIGH => 1
++	   },
++	  ];
++
++
++#
++#
++sub check_arch {
++  $_ = `uname -m`;
++  chomp;
++  unless (m/armv4tl/) {
++    warn "# \n# Can't execute on $_.  Run on integrator platform.\n# \n";
++    return 0;
++  }
++  return 1;
++}
++
++#
++#
++sub load_module {
++  my $params = shift;
++  print "\nRemoving Module\n";
++  system "rmmod dwc_otg";
++  print "Loading Module\n";
++  if ($params ne "") {
++    print "Module Parameters: $params\n";
++  }
++  if (system("modprobe dwc_otg $params")) {
++    warn "Unable to load module\n";
++    return 0;
++  }
++  return 1;
++}
++
++#
++#
++sub test_status {
++  my $arg = shift;
++
++  print "\n";
++
++  if (defined $arg) {
++    warn "WARNING: $arg\n";
++  }
++
++  if ($errors > 0) {
++    warn "TEST FAILED with $errors errors\n";
++    return 0;
++  } else {
++    print "TEST PASSED\n";
++    return 0 if (defined $arg);
++  }
++  return 1;
++}
++
++#
++#
++@EXPORT = qw(
++$sysfsdir
++$paramdir
++$params
++$errors
++check_arch
++load_module
++test_status
++);
++
++1;
+diff --git a/drivers/usb/host/dwc_otg/test/test_mod_param.pl b/drivers/usb/host/dwc_otg/test/test_mod_param.pl
+new file mode 100644
+index 0000000..dc3820d
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/test_mod_param.pl
+@@ -0,0 +1,133 @@
++#!/usr/bin/perl -w
++#
++# Run this program on the integrator.
++#
++# - Tests module parameter default values.
++# - Tests setting of valid module parameter values via modprobe.
++# - Tests invalid module parameter values.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($param,$expected) = @_;
++  my $value = get($param);
++
++  if ($value == $expected) {
++    print "$param = $value, okay\n";
++  }
++
++  else {
++    warn "ERROR: value of $param != $expected, $value\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub get {
++  my $param = shift;
++  my $tmp = `cat $paramdir/$param`;
++  chomp $tmp;
++  return $tmp;
++}
++
++#
++#
++sub test_main {
++
++  print "\nTesting Module Parameters\n";
++
++  load_module("") or die;
++
++  # Test initial values
++  print "\nTesting Default Values\n";
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  # Test low value
++  print "\nTesting Low Value\n";
++  my $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{LOW} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{LOW});
++  }
++
++  # Test high value
++  print "\nTesting High Value\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . "$_->{NAME}=$_->{HIGH} ";
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{HIGH});
++  }
++
++  # Test Enum
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $value);
++      }
++    }
++  }
++
++  # Test Invalid Values
++  print "\nTesting Invalid Values\n";
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{LOW}-1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  $cmd_params = "";
++  foreach (@{$params}) {
++    $cmd_params = $cmd_params . sprintf "$_->{NAME}=%d ", $_->{HIGH}+1;
++  }
++  load_module($cmd_params) or die;
++
++  foreach (@{$params}) {
++    test ($_->{NAME}, $_->{DEFAULT});
++  }
++
++  print "\nTesting Enumerated\n";
++  foreach (@{$params}) {
++    if (defined $_->{ENUM}) {
++      my $value;
++      foreach $value (@{$_->{ENUM}}) {
++	$value = $value + 1;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++	$value = $value - 2;
++	$cmd_params = "$_->{NAME}=$value";
++	load_module($cmd_params) or die;
++	test ($_->{NAME}, $_->{DEFAULT});
++      }
++    }
++  }
++
++  test_status() or die;
++}
++
++test_main();
++0;
+diff --git a/drivers/usb/host/dwc_otg/test/test_sysfs.pl b/drivers/usb/host/dwc_otg/test/test_sysfs.pl
+new file mode 100644
+index 0000000..cdc9963
+--- /dev/null
++++ b/drivers/usb/host/dwc_otg/test/test_sysfs.pl
+@@ -0,0 +1,193 @@
++#!/usr/bin/perl -w
++#
++# Run this program on the integrator
++# - Tests select sysfs attributes.
++# - Todo ... test more attributes, hnp/srp, buspower/bussuspend, etc.
++# -----------------------------------------------------------------------------
++use strict;
++use dwc_otg_test;
++
++check_arch() or die;
++
++#
++#
++sub test {
++  my ($attr,$expected) = @_;
++  my $string = get($attr);
++
++  if ($string eq $expected) {
++    printf("$attr = $string, okay\n");
++  }
++  else {
++    warn "ERROR: value of $attr != $expected, $string\n";
++    $errors ++;
++  }
++}
++
++#
++#
++sub set {
++  my ($reg, $value) = @_;
++  system "echo $value > $sysfsdir/$reg";
++}
++
++#
++#
++sub get {
++  my $attr = shift;
++  my $string = `cat $sysfsdir/$attr`;
++  chomp $string;
++  if ($string =~ m/\s\=\s/) {
++    my $tmp;
++    ($tmp, $string) = split /\s=\s/, $string;
++  }
++  return $string;
++}
++
++#
++#
++sub test_main {
++  print("\nTesting Sysfs Attributes\n");
++
++  load_module("") or die;
++
++  # Test initial values of regoffset/regvalue/guid/gsnpsid
++  print("\nTesting Default Values\n");
++
++  test("regoffset", "0xffffffff");
++  test("regvalue", "invalid offset");
++  test("guid", "0x12345678");	# this will fail if it has been changed
++  test("gsnpsid", "0x4f54200a");
++
++  # Test operation of regoffset/regvalue
++  print("\nTesting regoffset\n");
++  set('regoffset', '5a5a5a5a');
++  test("regoffset", "0xffffffff");
++
++  set('regoffset', '0');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '40000');
++  test("regoffset", "0x00000000");
++
++  set('regoffset', '3ffff');
++  test("regoffset", "0x0003ffff");
++
++  set('regoffset', '1');
++  test("regoffset", "0x00000001");
++
++  print("\nTesting regvalue\n");
++  set('regoffset', '3c');
++  test("regvalue", "0x12345678");
++  set('regvalue', '5a5a5a5a');
++  test("regvalue", "0x5a5a5a5a");
++  set('regvalue','a5a5a5a5');
++  test("regvalue", "0xa5a5a5a5");
++  set('guid','12345678');
++
++  # Test HNP Capable
++  print("\nTesting HNP Capable bit\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  set('hnpcapable','0');
++  test("hnpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  my $old = get('gusbcfg');
++  print("setting hnpcapable\n");
++  set('hnpcapable', '1');
++  test("hnpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<9)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<9)));
++
++  $old = get('gusbcfg');
++  print("clearing hnpcapable\n");
++  set('hnpcapable', '0');
++  test("hnpcapable", "0x0");
++  test ('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++  test ('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<9)));
++
++  # Test SRP Capable
++  print("\nTesting SRP Capable bit\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  set('srpcapable','0');
++  test("srpcapable", "0x0");
++
++  set('regoffset','0c');
++
++  $old = get('gusbcfg');
++  print("setting srpcapable\n");
++  set('srpcapable', '1');
++  test("srpcapable", "0x1");
++  test('gusbcfg', sprintf "0x%08x", (oct ($old) | (1<<8)));
++  test('regvalue', sprintf "0x%08x", (oct ($old) | (1<<8)));
++
++  $old = get('gusbcfg');
++  print("clearing srpcapable\n");
++  set('srpcapable', '0');
++  test("srpcapable", "0x0");
++  test('gusbcfg', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++  test('regvalue', sprintf "0x%08x", oct ($old) & (~(1<<8)));
++
++  # Test GGPIO
++  print("\nTesting GGPIO\n");
++  set('ggpio','5a5a5a5a');
++  test('ggpio','0x5a5a0000');
++  set('ggpio','a5a5a5a5');
++  test('ggpio','0xa5a50000');
++  set('ggpio','11110000');
++  test('ggpio','0x11110000');
++  set('ggpio','00001111');
++  test('ggpio','0x00000000');
++
++  # Test DEVSPEED
++  print("\nTesting DEVSPEED\n");
++  set('regoffset','800');
++  $old = get('regvalue');
++  set('devspeed','0');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','1');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++  set('devspeed','2');
++  test('devspeed','0x2');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 2));
++  set('devspeed','3');
++  test('devspeed','0x3');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 3));
++  set('devspeed','4');
++  test('devspeed','0x0');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3)));
++  set('devspeed','5');
++  test('devspeed','0x1');
++  test('regvalue',sprintf("0x%08x", oct($old) & ~(0x3) | 1));
++
++
++  #  mode	Returns the current mode:0 for device mode1 for host mode	Read
++  #  hnp	Initiate the Host Negotiation Protocol.  Read returns the status.	Read/Write
++  #  srp	Initiate the Session Request Protocol.  Read returns the status.	Read/Write
++  #  buspower	Get or Set the Power State of the bus (0 - Off or 1 - On) 	Read/Write
++  #  bussuspend	Suspend the USB bus.	Read/Write
++  #  busconnected	Get the connection status of the bus 	Read
++
++  #  gotgctl	Get or set the Core Control Status Register.	Read/Write
++  ##  gusbcfg	Get or set the Core USB Configuration Register	Read/Write
++  #  grxfsiz	Get or set the Receive FIFO Size Register	Read/Write
++  #  gnptxfsiz	Get or set the non-periodic Transmit Size Register	Read/Write
++  #  gpvndctl	Get or set the PHY Vendor Control Register	Read/Write
++  ##  ggpio	Get the value in the lower 16-bits of the General Purpose IO Register or Set the upper 16 bits.	Read/Write
++  ##  guid	Get or set the value of the User ID Register	Read/Write
++  ##  gsnpsid	Get the value of the Synopsys ID Regester	Read
++  ##  devspeed	Get or set the device speed setting in the DCFG register	Read/Write
++  #  enumspeed	Gets the device enumeration Speed.	Read
++  #  hptxfsiz	Get the value of the Host Periodic Transmit FIFO	Read
++  #  hprt0	Get or Set the value in the Host Port Control and Status Register	Read/Write
++
++  test_status("TEST NYI") or die;
++}
++
++test_main();
++0;
+-- 
+1.9.1
+