diff options
author | Florian Fainelli <florian@openwrt.org> | 2013-01-08 22:20:16 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2013-01-08 22:20:16 +0000 |
commit | 91e3a3252f68589aaa7d5131cbe77c2c552c1df4 (patch) | |
tree | a5cbc0f5235b30a249d4532479600f183be2eec6 /target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch | |
parent | b5988e0640bd2ad96cc2c0b79197873f7ab9085c (diff) | |
download | master-187ad058-91e3a3252f68589aaa7d5131cbe77c2c552c1df4.tar.gz master-187ad058-91e3a3252f68589aaa7d5131cbe77c2c552c1df4.tar.bz2 master-187ad058-91e3a3252f68589aaa7d5131cbe77c2c552c1df4.zip |
mvebu: add inital support for Marvell Armada XP/370 SoCs
This brings in the initial support for the Marvell Armada XP/370 SoCs.
Successfully tested on RD-A370-A1 and DB-MV784MP-GP boards the following
interfaces:
- Ethernet
- SDIO
- GPIOs
- SATA
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@35058 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch')
-rw-r--r-- | target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch | 46 |
1 files changed, 46 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch b/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch new file mode 100644 index 0000000000..3759741dbe --- /dev/null +++ b/target/linux/mvebu/patches-3.8/014-arm_mvebu_enable_sd_card_slot_a370_db.patch @@ -0,0 +1,46 @@ +The Armada XP DB evaluation board has one SD card slot, directly +connected to the SDIO IP of the SoC, so we add a device tree +description for it. + +However, in the default configuration of the board, the SD card slot +is not usable: the connector plugged into CON40 must be changed +against a different one, provided with the board by the +manufacturer. Since such a manual modification of the hardware is +needed, we did not enable the SDIO interface by default, and left it +to the board user to modify the Device Tree if needed. Since this +board is really only an evaluation board for developers and not a +final product, it is not too bad. + +Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> +--- +[florian: changed status to "okay" for RD-A370-A1] + arch/arm/boot/dts/armada-370-db.dts | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +diff --git a/arch/arm/boot/dts/armada-370-db.dts b/arch/arm/boot/dts/armada-370-db.dts +index 0004402..43ff156 100644 +--- a/arch/arm/boot/dts/armada-370-db.dts ++++ b/arch/arm/boot/dts/armada-370-db.dts +@@ -59,5 +59,20 @@ + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; ++ ++ mvsdio@d00d4000 { ++ pinctrl-0 = <&sdio_pins1>; ++ pinctrl-names = "default"; ++ /* ++ * This device is disabled by default, because ++ * using the SD card connector requires ++ * changing the default CON40 connector ++ * "DB-88F6710_MPP_2xRGMII_DEVICE_Jumper" to a ++ * different connector ++ * "DB-88F6710_MPP_RGMII_SD_Jumper". ++ */ ++ status = "okay"; ++ /* No CD or WP GPIOs */ ++ }; + }; + }; +-- +1.7.9.5 |