diff options
| author | Gabor Juhos <juhosg@openwrt.org> | 2012-01-26 10:44:23 +0000 |
|---|---|---|
| committer | Gabor Juhos <juhosg@openwrt.org> | 2012-01-26 10:44:23 +0000 |
| commit | ab13e563a82cc058127235f6c1bddd5fd7eca20d (patch) | |
| tree | f2e05dc4e9272fc319f2f1d1c220ff4001970e87 /target/linux/ramips/image/Makefile | |
| parent | 872b9a83b93fa1dd8cb1e4bebcd7bdf3f77ac46e (diff) | |
| download | master-187ad058-ab13e563a82cc058127235f6c1bddd5fd7eca20d.tar.gz master-187ad058-ab13e563a82cc058127235f6c1bddd5fd7eca20d.tar.bz2 master-187ad058-ab13e563a82cc058127235f6c1bddd5fd7eca20d.zip | |
ramips: add support for Sitecom WL-341v3 and other Sercomm IP1006RRv2 boards
This patch adds support for the Sitecom WL-341 v3 and other Sercomm
IP1006RRv2 based boards for sysupgrade support and for the initial
flash through pushbutton initiated recovery mode with the special
partition table and fixes for the quirks and things required by the
modified bootloader.
There is a known bug, Wi-Fi is not working on my board probably
because of the lack of RAM (the board only has 16MiB ram -- half of
the normal amount for non rebadged versions, but there is an empty
slot for another ram chip,) but I don't know for sure. The driver
loads but hostapd fails to load so I think it's not related to the
specific device except for the lack of RAM.
Moreover, only 7 of the 11 onboard leds are confirmed working, it
seems that one of the others is always on and the remaining ones are
connected to the wireless card leds already recognized by OpenWrt
[juhosg: reordered some parts in order to keep things sorted
alphabetically]
Signed-off-by: Marco Antonio Mauro <marcus90@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29910 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ramips/image/Makefile')
| -rw-r--r-- | target/linux/ramips/image/Makefile | 33 |
1 files changed, 33 insertions, 0 deletions
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index c6b214ff36..745edefbae 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -67,6 +67,28 @@ define BuildFirmware/Generic fi; fi endef +define BuildFirmware/WL341V3 + $(call PatchKernelLzma,$(2),$(3) $($(4))) + $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage") + if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ + echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ + else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ + echo "Warning: $(KDIR)/root.$(1) is too big"; \ + else \ + ( \ + dd if=/dev/zero bs=195936 count=1; \ + echo "1.01"; \ + dd if=/dev/zero bs=581 count=1; \ + echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ + dd if=/dev/zero bs=65552 count=1; \ + dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \ + dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ + dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(5) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ + echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ + ) > $(call imgname,$(1),$(2))-factory.bin; \ + fi; fi +endef + define BuildFirmware/Buffalo $(call PatchKernelLzma,$(2),board=$(3) $($(4))) $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage") @@ -151,6 +173,16 @@ define Image/Build/Template/OMNIEMB $(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352) endef +mtdlayout_sercomm_4M=mtdparts=physmap-flash.0:128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,832k(kernel),2944k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash) +define Image/Build/Template/WL341V3 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656) + $(call BuildFirmware/WL341V3,$(1),$(2),board=$(3),mtdlayout_sercomm_4M,851968,3014656) +endef + +define Image/Build/Profile/WL341V3 + $(call Image/Build/Template/WL341V3,$(1),wl341v3,WL341V3) +endef + define Image/Build/Profile/DIR300B1 $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) @@ -294,6 +326,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/MOFI35003GN,$(1)) $(call Image/Build/Profile/W502U,$(1)) $(call Image/Build/Profile/WR5123GN,$(1)) + $(call Image/Build/Profile/WL341V3,$(1)) $(call Image/Build/Profile/WL351,$(1)) endef endif |