aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/ramips
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2015-11-24 18:29:02 +0000
committerJohn Crispin <blogic@openwrt.org>2015-11-24 18:29:02 +0000
commit3fa9bab32afdb102457dd6b36ff46c2fc8310acc (patch)
tree4c1b7fcee7dd753eb6b51e07dac9b93fff296b04 /target/linux/ramips
parentb7eec4c0a84f7e76dea67437f7fac406e29db1e4 (diff)
downloadmaster-187ad058-3fa9bab32afdb102457dd6b36ff46c2fc8310acc.tar.gz
master-187ad058-3fa9bab32afdb102457dd6b36ff46c2fc8310acc.tar.bz2
master-187ad058-3fa9bab32afdb102457dd6b36ff46c2fc8310acc.zip
ramips: add support for Youku YK1
Changes since V1: I resend this patch for current trunk.The former V1 patch is for CC branch. Signed-off-by: Shonn Lu <countrysideboy@qq.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@47617 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/01_leds5
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/ramips.sh3
-rwxr-xr-xtarget/linux/ramips/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ramips/dts/YOUKU-YK1.dts127
-rw-r--r--target/linux/ramips/image/Makefile2
6 files changed, 141 insertions, 2 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds
index 5627c8ca8c..1c18ded505 100755
--- a/target/linux/ramips/base-files/etc/board.d/01_leds
+++ b/target/linux/ramips/base-files/etc/board.d/01_leds
@@ -268,6 +268,11 @@ zbt-wr8305rt)
zte-q7)
set_wifi_led "$board:blue:status"
;;
+youku-yk1)
+ ucidef_set_led_default "power" "power" "$board:blue:power" "1"
+ set_wifi_led "$board:blue:air"
+ set_usb_led "$board:blue:usb"
+ ;;
esac
board_config_flush
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index 382174298a..22809d1720 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -84,7 +84,8 @@ ramips_setup_interfaces()
wsr-600|\
wt1520|\
y1|\
- zbt-wg2626)
+ zbt-wg2626|\
+ youku-yk1)
ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
ucidef_add_switch "switch0" "1" "1"
ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 6t"
diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh
index a1bcb7261d..d6fdeb9891 100755
--- a/target/linux/ramips/base-files/lib/ramips.sh
+++ b/target/linux/ramips/base-files/lib/ramips.sh
@@ -460,6 +460,9 @@ ramips_board_detect() {
*"ZBT-WR8305RT")
name="zbt-wr8305rt"
;;
+ *"YK1")
+ name="youku-yk1"
+ ;;
*)
name="generic"
;;
diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh
index 0e8d619069..0b9dd43791 100755
--- a/target/linux/ramips/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh
@@ -134,7 +134,8 @@ platform_check_image() {
zbt-wa05|\
zbt-wg2626|\
zbt-wr8305rt|\
- zte-q7)
+ zte-q7|\
+ youku-yk1)
[ "$magic" != "27051956" ] && {
echo "Invalid image type."
return 1
diff --git a/target/linux/ramips/dts/YOUKU-YK1.dts b/target/linux/ramips/dts/YOUKU-YK1.dts
new file mode 100644
index 0000000000..418351cceb
--- /dev/null
+++ b/target/linux/ramips/dts/YOUKU-YK1.dts
@@ -0,0 +1,127 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+ compatible = "YOUKU-YK1", "ralink,mt7620a-soc";
+ model = "YOUKU YK1";
+
+ palmbus@10000000 {
+
+ gpio0: gpio@600 {
+ status = "okay";
+ };
+
+ gpio1: gpio@638 {
+ status = "okay";
+ };
+
+ gpio2: gpio@660 {
+ status = "okay";
+ };
+
+ gpio3: gpio@688 {
+ status = "okay";
+ };
+
+ spi@b00 {
+ status = "okay";
+
+ m25p80@0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "w25q256";
+ reg = <0 0>;
+ linux,modalias = "m25p80", "w25q256";
+ spi-max-frequency = <10000000>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "u-boot-env";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ label = "firmware";
+ reg = <0x50000 0x1fb0000>;
+ };
+ };
+ };
+ };
+
+ pinctrl {
+ state_default: pinctrl0 {
+ default {
+ ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "ephy", "wled", "nd_sd";
+ ralink,function = "gpio";
+ };
+ };
+ };
+
+ ethernet@10100000 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&ephy_pins>;
+ mtd-mac-address = <&factory 0x4>;
+ ralink,port-map = "llllw";
+ };
+
+ wmac@10180000 {
+ ralink,mtd-eeprom = <&factory 0>;
+ };
+
+ sdhci@b0130000 {
+ status = "okay";
+ };
+
+ ehci@101c0000 {
+ status = "okay";
+ };
+
+ ohci@101c1000 {
+ status = "okay";
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ wan {
+ label = "youku-yk1:blue:wan";
+ gpios = <&gpio2 4 1>;
+ };
+ air {
+ label = "youku-yk1:blue:air";
+ gpios = <&gpio3 0 1>;
+ };
+ usb {
+ label = "youku-yk1:blue:usb";
+ gpios = <&gpio1 11 1>;
+ };
+ power {
+ label = "youku-yk1:blue:power";
+ gpios = <&gpio1 5 1>;
+ };
+ };
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <20>;
+ reset {
+ label = "reset";
+ gpios = <&gpio0 1 1>;
+ linux,code = <0x198>;
+ };
+ };
+};
diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile
index 5e19c3f97d..5a2b98cac6 100644
--- a/target/linux/ramips/image/Makefile
+++ b/target/linux/ramips/image/Makefile
@@ -900,6 +900,7 @@ Image/Build/Profile/WRTNODE=$(call BuildFirmware/Default16M/$(1),$(1),wrtnode,WR
Image/Build/Profile/WT3020=$(call BuildFirmware/PorayDualSize/$(1),$(1),wt3020,WT3020)
Image/Build/Profile/MIWIFI-MINI=$(call BuildFirmware/Default16M/$(1),$(1),miwifi-mini,MIWIFI-MINI)
Image/Build/Profile/ZTE-Q7=$(call BuildFirmware/Default8M/$(1),$(1),zte-q7,ZTE-Q7)
+Image/Build/Profile/YOUKU-YK1=$(call BuildFirmware/Default16M/$(1),$(1),youku-yk1,YOUKU-YK1)
Image/Build/Profile/ZBT-WA05=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wa05,ZBT-WA05)
Image/Build/Profile/ZBT-WR8305RT=$(call BuildFirmware/Default8M/$(1),$(1),zbt-wr8305rt,ZBT-WR8305RT)
Image/Build/Profile/ArcherC20i=$(call BuildFirmware/Tplink/$(1),$(1),ArcherC20i,ArcherC20i)
@@ -939,6 +940,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/WT3020,$(1))
$(call Image/Build/Profile/MIWIFI-MINI,$(1))
$(call Image/Build/Profile/ZTE-Q7,$(1))
+ $(call Image/Build/Profile/YOUKU-YK1,$(1))
$(call Image/Build/Profile/ZBT-WA05,$(1))
$(call Image/Build/Profile/ZBT-WR8305RT,$(1))
$(call Image/Build/Profile/ArcherC20i,$(1))