s3c2442: R.I.P.

It is broken and it is not maintained by anyone since long time.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34767 3c298f89-4303-0410-b956-a3cf2f4a3e73

9 files changed, 0 insertions, 2912 deletions

diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c
deleted file mode 100644
index 95c1e59e2f..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-bt.c
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- * Bluetooth PM code for the Openmoko Freerunner GSM Phone
- *
- * (C) 2007 by Openmoko Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/rfkill.h>
-#include <linux/err.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/gta02.h>
-#include <linux/mfd/pcf50633/gpio.h>
-
-#include <linux/regulator/consumer.h>
-
-#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
-
-struct gta02_pm_bt_data {
-	struct regulator *regulator;
-	struct rfkill *rfkill;
-	int pre_resume_state;
-};
-
-static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
-		       char *buf)
-{
-	int ret = 0;
-	if (!strcmp(attr->attr.name, "power_on")) {
-		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
-			ret = 1;
-	} else if (!strcmp(attr->attr.name, "reset")) {
-		if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
-			ret = 1;
-	}
-
-	if (!ret) {
-		return strlcpy(buf, "0\n", 3);
-	} else {
-		return strlcpy(buf, "1\n", 3);
-	}
-}
-
-static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
-{
-	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
-
-	dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
-
-	bt_data = dev_get_drvdata(dev);
-
-    s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
-
-	if (on) {
-		if (!regulator_is_enabled(bt_data->regulator))
-			regulator_enable(bt_data->regulator);
-	} else {
-		if (regulator_is_enabled(bt_data->regulator))
-			regulator_disable(bt_data->regulator);
-	}
-
-	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
-}
-
-
-static int bt_rfkill_toggle_radio(void *data, enum rfkill_state state)
-{
-	struct device *dev = data;
-	unsigned long on = (state == RFKILL_STATE_ON);
-
-	__gta02_pm_bt_toggle_radio(dev, on);
-
-	return 0;
-}
-
-static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
-			const char *buf, size_t count)
-{
-	unsigned long on = simple_strtoul(buf, NULL, 10);
-	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
-
-	if (!strcmp(attr->attr.name, "power_on")) {
-		enum rfkill_state state = on ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
-		bt_rfkill_toggle_radio(dev, state);
-		bt_data->rfkill->state = state;
-
-		__gta02_pm_bt_toggle_radio(dev, on);
-	} else if (!strcmp(attr->attr.name, "reset")) {
-		/* reset is low-active, so we need to invert */
-		s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
-	}
-
-	return count;
-}
-
-static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
-static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
-
-#ifdef CONFIG_PM
-static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
-
-	dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
-
-	bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
-	__gta02_pm_bt_toggle_radio(&pdev->dev, 0);
-
-	return 0;
-}
-
-static int gta02_bt_resume(struct platform_device *pdev)
-{
-	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
-	dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
-
-	__gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
-	return 0;
-}
-#else
-#define gta02_bt_suspend	NULL
-#define gta02_bt_resume		NULL
-#endif
-
-static struct attribute *gta02_bt_sysfs_entries[] = {
-	&dev_attr_power_on.attr,
-	&dev_attr_reset.attr,
-	NULL
-};
-
-static struct attribute_group gta02_bt_attr_group = {
-	.name	= NULL,
-	.attrs	= gta02_bt_sysfs_entries,
-};
-
-static int __init gta02_bt_probe(struct platform_device *pdev)
-{
-	struct rfkill *rfkill;
-	struct regulator *regulator;
-	struct gta02_pm_bt_data *bt_data;
-	int ret;
-
-	dev_info(&pdev->dev, DRVMSG ": starting\n");
-
-	bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
-	dev_set_drvdata(&pdev->dev, bt_data);
-
-	regulator = regulator_get(&pdev->dev, "BT_3V2");
-	if (IS_ERR(regulator))
-		return -ENODEV;
-
-	bt_data->regulator = regulator;
-
-	/* this tests the true physical state of the regulator... */
-	if (regulator_is_enabled(regulator)) {
-		/*
-		 * but these only operate on the logical state of the
-		 * regulator... so we need to logicaly "adopt" it on
-		 * to turn it off
-		 */
-		regulator_enable(regulator);
-		regulator_disable(regulator);
-	}
-
-	/* we pull reset to low to make sure that the chip doesn't
-	 * drain power through the reset line */
-	s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
-
-	rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_BLUETOOTH);
-
-	rfkill->name = pdev->name;
-	rfkill->data = &pdev->dev;
-	rfkill->state = RFKILL_STATE_OFF;
-	rfkill->toggle_radio = bt_rfkill_toggle_radio;
-
-	ret = rfkill_register(rfkill);
-	if (ret) {
-		dev_err(&pdev->dev, "Failed to register rfkill\n");
-		return ret;
-	}
-
-	bt_data->rfkill = rfkill;
-
-	return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
-}
-
-static int gta02_bt_remove(struct platform_device *pdev)
-{
-	struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
-	struct regulator *regulator;
-
-	sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
-
-	if (bt_data->rfkill) {
-		rfkill_unregister(bt_data->rfkill);
-		rfkill_free(bt_data->rfkill);
-	}
-
-	if (!bt_data || !bt_data->regulator)
-		return 0;
-
-	regulator = bt_data->regulator;
-
-	/* Make sure regulator is disabled before calling regulator_put */
-	if (regulator_is_enabled(regulator))
-		regulator_disable(regulator);
-
-	regulator_put(regulator);
-
-	kfree(bt_data);
-
-	return 0;
-}
-
-static struct platform_driver gta02_bt_driver = {
-	.probe		= gta02_bt_probe,
-	.remove		= gta02_bt_remove,
-	.suspend	= gta02_bt_suspend,
-	.resume		= gta02_bt_resume,
-	.driver		= {
-		.name		= "gta02-pm-bt",
-	},
-};
-
-static int __devinit gta02_bt_init(void)
-{
-	return platform_driver_register(&gta02_bt_driver);
-}
-
-static void gta02_bt_exit(void)
-{
-	platform_driver_unregister(&gta02_bt_driver);
-}
-
-module_init(gta02_bt_init);
-module_exit(gta02_bt_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
-MODULE_DESCRIPTION(DRVMSG);
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c
deleted file mode 100644
index ef598c71f8..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gps.c
+++ /dev/null
@@ -1,242 +0,0 @@
-/*
- * GPS Power Management code for the Openmoko Freerunner GSM Phone
- *
- * (C) 2007-2009 by Openmoko Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-
-#include <asm/mach-types.h>
-
-#include <mach/gta02.h>
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <linux/regulator/consumer.h>
-#include <linux/err.h>
-
-struct gta02_pm_gps_data {
-#ifdef CONFIG_PM
-	int keep_on_in_suspend;
-#endif
-	int power_was_on;
-	struct regulator *regulator;
-};
-
-static struct gta02_pm_gps_data gta02_gps;
-
-int gta02_pm_gps_is_on(void)
-{
-	return gta02_gps.power_was_on;
-}
-EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
-
-/* This is the POWERON pin */
-static void gps_pwron_set(int on)
-{
-	if (on) {
-		/* return UART pins to being UART pins */
-		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_TXD1);
-		/* remove pulldown now it won't be floating any more */
-		s3c2410_gpio_pullup(S3C2410_GPH5, 0);
-
-		if (!gta02_gps.power_was_on)
-			regulator_enable(gta02_gps.regulator);
-	} else {
-		/*
-		 * take care not to power unpowered GPS from UART TX
-		 * return them to GPIO and force low
-		 */
-		s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
-		s3c2410_gpio_setpin(S3C2410_GPH4, 0);
-		/* don't let RX from unpowered GPS float */
-		s3c2410_gpio_pullup(S3C2410_GPH5, 1);
-		if (gta02_gps.power_was_on)
-			regulator_disable(gta02_gps.regulator);
-	}
-}
-
-static int gps_pwron_get(void)
-{
-	return regulator_is_enabled(gta02_gps.regulator);
-}
-
-#ifdef CONFIG_PM
-/* This is the flag for keeping gps ON during suspend */
-static void gps_keep_on_in_suspend_set(int on)
-{
-	gta02_gps.keep_on_in_suspend = on;
-}
-
-static int gps_keep_on_in_suspend_get(void)
-{
-	return gta02_gps.keep_on_in_suspend;
-}
-#endif
-
-static ssize_t power_gps_read(struct device *dev,
-			      struct device_attribute *attr, char *buf)
-{
-	int ret = 0;
-
-	if (!strcmp(attr->attr.name, "power_on") ||
-	    !strcmp(attr->attr.name, "pwron")) {
-		ret = gps_pwron_get();
-#ifdef CONFIG_PM
-	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
-		ret = gps_keep_on_in_suspend_get();
-#endif
-	}
-	if (ret)
-		return strlcpy(buf, "1\n", 3);
-	else
-		return strlcpy(buf, "0\n", 3);
-}
-
-static ssize_t power_gps_write(struct device *dev,
-			       struct device_attribute *attr, const char *buf,
-			       size_t count)
-{
-	unsigned long on = simple_strtoul(buf, NULL, 10);
-
-	if (!strcmp(attr->attr.name, "power_on") ||
-	    !strcmp(attr->attr.name, "pwron")) {
-		gps_pwron_set(on);
-		gta02_gps.power_was_on = !!on;
-#ifdef CONFIG_PM
-	} else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
-		gps_keep_on_in_suspend_set(on);
-#endif
-	}
-	return count;
-}
-
-#ifdef CONFIG_PM
-static int gta02_pm_gps_suspend(struct platform_device *pdev,
-				pm_message_t state)
-{
-	if (!gta02_gps.keep_on_in_suspend ||
-		!gta02_gps.power_was_on)
-		gps_pwron_set(0);
-	else
-		dev_warn(&pdev->dev, "GTA02: keeping gps ON "
-			 "during suspend\n");
-	return 0;
-}
-
-static int gta02_pm_gps_resume(struct platform_device *pdev)
-{
-	if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
-		gps_pwron_set(1);
-
-	return 0;
-}
-
-static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
-#else
-#define gta02_pm_gps_suspend	NULL
-#define gta02_pm_gps_resume	NULL
-#endif
-
-static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
-
-static struct attribute *gta02_gps_sysfs_entries[] = {
-	&dev_attr_power_on.attr,
-#ifdef CONFIG_PM
-	&dev_attr_keep_on_in_suspend.attr,
-#endif
-	NULL
-};
-
-static struct attribute_group gta02_gps_attr_group = {
-	.name	= NULL,
-	.attrs	= gta02_gps_sysfs_entries,
-};
-
-static int __init gta02_pm_gps_probe(struct platform_device *pdev)
-{
-	gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
-	if (IS_ERR(gta02_gps.regulator)) {
-		dev_err(&pdev->dev, "probe failed %ld\n",
-			PTR_ERR(gta02_gps.regulator));
-
-		return PTR_ERR(gta02_gps.regulator);
-	}
-
-	dev_info(&pdev->dev, "starting\n");
-
-	/*
-	 * Here we should call the code that handles the set GPS power
-	 * off action.  But, the regulator API does not allow us to
-	 * reassert regulator state, and when we read the regulator API
-	 * logical state, it can differ from the actual state,  So
-	 * a workaround for this is to just set the regulator off in the
-	 * PMU directly.  Because that's different from normal flow, we
-	 * have to reproduce other things from the OFF action here too.
-	 */
-
-	/*
-	 * u-boot enables LDO5 (GPS), which doesn't make sense and
-	 * causes confusion. We therefore disable the regulator here.
-	 */
-	pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
-
-	/*
-	 * take care not to power unpowered GPS from UART TX
-	 * return them to GPIO and force low
-	 */
-	s3c2410_gpio_cfgpin(S3C2410_GPH4, S3C2410_GPH4_OUTP);
-	s3c2410_gpio_setpin(S3C2410_GPH4, 0);
-	/* don't let RX from unpowered GPS float */
-	s3c2410_gpio_pullup(S3C2410_GPH5, 1);
-
-	return sysfs_create_group(&pdev->dev.kobj,
-				  &gta02_gps_attr_group);
-}
-
-static int gta02_pm_gps_remove(struct platform_device *pdev)
-{
-	regulator_put(gta02_gps.regulator);
-	sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
-	return 0;
-}
-
-static struct platform_driver gta02_pm_gps_driver = {
-	.probe		= gta02_pm_gps_probe,
-	.remove		= gta02_pm_gps_remove,
-	.suspend	= gta02_pm_gps_suspend,
-	.resume		= gta02_pm_gps_resume,
-	.driver		= {
-		.name		= "gta02-pm-gps",
-	},
-};
-
-static int __devinit gta02_pm_gps_init(void)
-{
-	return platform_driver_register(&gta02_pm_gps_driver);
-}
-
-static void gta02_pm_gps_exit(void)
-{
-	platform_driver_unregister(&gta02_pm_gps_driver);
-}
-
-module_init(gta02_pm_gps_init);
-module_exit(gta02_pm_gps_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c
deleted file mode 100644
index 687b260e10..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-gsm.c
+++ /dev/null
@@ -1,317 +0,0 @@
-/*
- * GSM Management code for the Openmoko Freerunner GSM Phone
- *
- * (C) 2007 by Openmoko Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/platform_device.h>
-#include <linux/console.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/delay.h>
-
-#include <mach/gpio.h>
-#include <asm/mach-types.h>
-
-#include <mach/hardware.h>
-#include <mach/cpu.h>
-
-#include <mach/gta02.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-
-int gta_gsm_interrupts;
-EXPORT_SYMBOL(gta_gsm_interrupts);
-
-extern void s3c24xx_serial_console_set_silence(int);
-
-struct gta02pm_priv {
-	int gpio_ndl_gsm;
-	struct console *con;
-};
-
-static struct gta02pm_priv gta02_gsm;
-
-static struct console *find_s3c24xx_console(void)
-{
-	struct console *con;
-
-	acquire_console_sem();
-
-	for (con = console_drivers; con; con = con->next) {
-		if (!strcmp(con->name, "ttySAC"))
-			break;
-	}
-
-	release_console_sem();
-
-	return con;
-}
-
-static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
-			char *buf)
-{
-	if (!strcmp(attr->attr.name, "power_on")) {
-		if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
-			goto out_1;
-	} else if (!strcmp(attr->attr.name, "download")) {
-		if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
-			goto out_1;
-	} else if (!strcmp(attr->attr.name, "flowcontrolled")) {
-		if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT)
-			goto out_1;
-	}
-
-	return strlcpy(buf, "0\n", 3);
-out_1:
-	return strlcpy(buf, "1\n", 3);
-}
-
-static void gsm_on_off(struct device *dev, int on)
-{
-	if (!on) {
-		s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPIO_INPUT);
-		s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPIO_INPUT);
-
-		pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
-
-		if (gta02_gsm.con) {
-			s3c24xx_serial_console_set_silence(0);
-			console_start(gta02_gsm.con);
-
-			dev_dbg(dev, "powered down gta02 GSM, enabling "
-					"serial console\n");
-		}
-
-		return;
-	}
-
-	if (gta02_gsm.con) {
-		dev_dbg(dev, "powering up GSM, thus "
-				"disconnecting serial console\n");
-
-		console_stop(gta02_gsm.con);
-		s3c24xx_serial_console_set_silence(1);
-	}
-
-	/* allow UART to talk to GSM side now we will power it */
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
-	s3c2410_gpio_cfgpin(S3C2410_GPH2, S3C2410_GPH2_TXD0);
-
-	pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
-
-	msleep(100);
-
-	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1);
-	msleep(500);
-	s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0);
-
-	/*
-	 * workaround for calypso firmware moko10 and earlier,
-	 * without this it will leave IRQ line high after
-	 * booting
-	 */
-	s3c2410_gpio_setpin(S3C2410_GPH1, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-	msleep(1000);
-	s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
-
-}
-
-static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
-			 const char *buf, size_t count)
-{
-	unsigned long on = simple_strtoul(buf, NULL, 10);
-
-	if (!strcmp(attr->attr.name, "power_on")) {
-		gsm_on_off(dev, on);
-
-		return count;
-	}
-
-	if (!strcmp(attr->attr.name, "download")) {
-		/*
-		 * the keyboard / buttons driver requests and enables
-		 * the JACK_INSERT IRQ.  We have to take care about
-		 * not enabling and disabling the IRQ when it was
-		 * already in that state or we get "unblanaced IRQ"
-		 * kernel warnings and stack dumps.  So we use the
-		 * copy of the ndl_gsm state to figure out if we should
-		 * enable or disable the jack interrupt
-		 */
-		if (on) {
-			if (gta02_gsm.gpio_ndl_gsm)
-				disable_irq(gpio_to_irq(
-						   GTA02_GPIO_JACK_INSERT));
-		} else {
-			if (!gta02_gsm.gpio_ndl_gsm)
-				enable_irq(gpio_to_irq(
-						   GTA02_GPIO_JACK_INSERT));
-		}
-
-		gta02_gsm.gpio_ndl_gsm = !on;
-		s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
-
-		return count;
-	}
-
-	if (!strcmp(attr->attr.name, "flowcontrolled")) {
-		if (on) {
-			gta_gsm_interrupts = 0;
-			s3c2410_gpio_setpin(S3C2410_GPH1, 1);
-			s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_OUTP);
-		} else
-			s3c2410_gpio_cfgpin(S3C2410_GPH1, S3C2410_GPH1_nRTS0);
-	}
-
-	return count;
-}
-
-static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
-static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
-static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
-static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
-
-#ifdef CONFIG_PM
-
-static int gta02_gsm_resume(struct platform_device *pdev);
-static int gta02_gsm_suspend(struct platform_device *pdev, pm_message_t state)
-{
-	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
-	 * don't need to do much here. */
-
-	/* If flowcontrol asserted, abort if GSM already interrupted */
-	if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
-		if (gta_gsm_interrupts)
-			goto busy;
-	}
-
-	/* disable DL GSM to prevent jack_insert becoming 'floating' */
-	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
-	return 0;
-
-busy:
-	return -EBUSY;
-}
-
-static int
-gta02_gsm_suspend_late(struct platform_device *pdev, pm_message_t state)
-{
-	/* Last chance: abort if GSM already interrupted */
-	if (s3c2410_gpio_getcfg(S3C2410_GPH1) == S3C2410_GPIO_OUTPUT) {
-		if (gta_gsm_interrupts)
-			return -EBUSY;
-	}
-	return 0;
-}
-
-static int gta02_gsm_resume(struct platform_device *pdev)
-{
-	/* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
-	 * don't need to do much here. */
-
-	/* Make sure that the kernel console on the serial port is still
-	 * disabled. FIXME: resume ordering race with serial driver! */
-	if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON))
-		console_stop(gta02_gsm.con);
-
-	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
-
-	return 0;
-}
-#else
-#define gta02_gsm_suspend	NULL
-#define gta02_gsm_suspend_late	NULL
-#define gta02_gsm_resume	NULL
-#endif /* CONFIG_PM */
-
-static struct attribute *gta02_gsm_sysfs_entries[] = {
-	&dev_attr_power_on.attr,
-	&dev_attr_reset.attr,
-	&dev_attr_download.attr,
-	&dev_attr_flowcontrolled.attr,
-	NULL
-};
-
-static struct attribute_group gta02_gsm_attr_group = {
-	.name	= NULL,
-	.attrs	= gta02_gsm_sysfs_entries,
-};
-
-static int __init gta02_gsm_probe(struct platform_device *pdev)
-{
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v1_SYSTEM_REV:
-	case GTA02v2_SYSTEM_REV:
-	case GTA02v3_SYSTEM_REV:
-	case GTA02v4_SYSTEM_REV:
-	case GTA02v5_SYSTEM_REV:
-	case GTA02v6_SYSTEM_REV:
-		break;
-	default:
-		dev_warn(&pdev->dev, "Unknown Freerunner Revision 0x%x, "
-			 "some PM features not available!!!\n",
-			 system_rev);
-		break;
-	}
-
-	gta02_gsm.con = find_s3c24xx_console();
-	if (!gta02_gsm.con)
-		dev_warn(&pdev->dev,
-			 "cannot find S3C24xx console driver\n");
-
-	/* note that download initially disabled, and enforce that */
-	gta02_gsm.gpio_ndl_gsm = 1;
-	s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
-
-	/* GSM is to be initially off (at boot, or if this module inserted) */
-	gsm_on_off(&pdev->dev, 0);
-
-	return sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
-}
-
-static int gta02_gsm_remove(struct platform_device *pdev)
-{
-	sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
-
-	return 0;
-}
-
-static struct platform_driver gta02_gsm_driver = {
-	.probe		= gta02_gsm_probe,
-	.remove		= gta02_gsm_remove,
-	.suspend	= gta02_gsm_suspend,
-	.suspend_late	= gta02_gsm_suspend_late,
-	.resume		= gta02_gsm_resume,
-	.driver		= {
-		.name		= "gta02-pm-gsm",
-	},
-};
-
-static int __devinit gta02_gsm_init(void)
-{
-	return platform_driver_register(&gta02_gsm_driver);
-}
-
-static void gta02_gsm_exit(void)
-{
-	platform_driver_unregister(&gta02_gsm_driver);
-}
-
-module_init(gta02_gsm_init);
-module_exit(gta02_gsm_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
-MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c
deleted file mode 100644
index 9cb8e6a5e8..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/gta02-pm-wlan.c
+++ /dev/null
@@ -1,194 +0,0 @@
-/*
- * GTA02 WLAN power management
- *
- * (C) 2008, 2009 by Openmoko Inc.
- * Author: Andy Green <andy@openmoko.com>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation
- *
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/mutex.h>
-#include <linux/platform_device.h>
-
-#include <mach/hardware.h>
-#include <asm/mach-types.h>
-
-#include <mach/gta02.h>
-#include <mach/gta02-pm-wlan.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-
-#include <linux/delay.h>
-#include <linux/rfkill.h>
-
-
-/* ----- Module hardware reset ("power") ----------------------------------- */
-
-
-void gta02_wlan_reset(int assert_reset)
-{
-	if (assert_reset) {
-		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
-		msleep(200); /* probably excessive but we don't have specs */
-	} else {
-		s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
-	}
-}
-
-/* ----- rfkill ------------------------------------------------------------ */
-
-/*
- * S3C MCI handles suspend/resume through device removal/insertion. In order to
- * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
- * we therefore need to maintain rfkill state outside the driver.
- *
- * This platform driver is as good a place as any other.
- */
-
-static int (*gta02_wlan_rfkill_cb)(void *user, int on);
-static void *gta02_wlan_rfkill_user;
-static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
-static int gta02_wlan_rfkill_on;
-
-/*
- * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
- * driver is ready to process rfkill callbacks. To prevent the state from
- * changing until the driver has completed its initialization, we grab and hold
- * the rfkill lock.
- *
- * A call to gta02_wlan_query_rfkill_lock must be followed by either
- * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
- * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
- */
-
-int gta02_wlan_query_rfkill_lock(void)
-{
-	mutex_lock(&gta02_wlan_rfkill_lock);
-	return gta02_wlan_rfkill_on;
-}
-EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
-
-void gta02_wlan_query_rfkill_unlock(void)
-{
-	mutex_unlock(&gta02_wlan_rfkill_lock);
-}
-EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
-
-void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
-{
-	BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
-	BUG_ON(gta02_wlan_rfkill_cb);
-	gta02_wlan_rfkill_cb = cb;
-	gta02_wlan_rfkill_user = user;
-	mutex_unlock(&gta02_wlan_rfkill_lock);
-}
-EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
-
-void gta02_wlan_clear_rfkill_cb(void)
-{
-	mutex_lock(&gta02_wlan_rfkill_lock);
-	BUG_ON(!gta02_wlan_rfkill_cb);
-	gta02_wlan_rfkill_cb = NULL;
-	mutex_unlock(&gta02_wlan_rfkill_lock);
-}
-EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
-
-static int gta02_wlan_toggle_radio(void *data, enum rfkill_state state)
-{
-	struct device *dev = data;
-	int on = state == RFKILL_STATE_UNBLOCKED;
-	int res = 0;
-
-	dev_dbg(dev, "gta02_wlan_toggle_radio: state %d (%p)\n",
-	    state, gta02_wlan_rfkill_cb);
-	mutex_lock(&gta02_wlan_rfkill_lock);
-	if (gta02_wlan_rfkill_cb)
-		res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, on);
-	if (!res)
-		gta02_wlan_rfkill_on = on;
-	mutex_unlock(&gta02_wlan_rfkill_lock);
-	return res;
-}
-
-
-/* ----- Initialization/removal -------------------------------------------- */
-
-
-static int __init gta02_wlan_probe(struct platform_device *pdev)
-{
-	/* default-on for now */
-	const int default_state = 1;
-	struct rfkill *rfkill;
-	int error;
-
-	dev_info(&pdev->dev, "starting\n");
-
-	s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
-	gta02_wlan_reset(1);
-	gta02_wlan_reset(0);
-
-	rfkill = rfkill_allocate(&pdev->dev, RFKILL_TYPE_WLAN);
-	rfkill->name = "ar6000";
-	rfkill->data = &pdev->dev;
-	rfkill->state = default_state ? RFKILL_STATE_ON : RFKILL_STATE_OFF;
-	/*
-	 * If the WLAN driver somehow managed to get activated before we're
-	 * ready, the driver is now in an unknown state, which isn't something
-	 * we're prepared to handle. This can't happen, so just fail hard.
-	 */
-	BUG_ON(gta02_wlan_rfkill_cb);
-	gta02_wlan_rfkill_on = default_state;
-	rfkill->toggle_radio = gta02_wlan_toggle_radio;
-
-	error = rfkill_register(rfkill);
-	if (error) {
-		rfkill_free(rfkill);
-		return error;
-	}
-
-	dev_set_drvdata(&pdev->dev, rfkill);
-
-	return 0;
-}
-
-static int gta02_wlan_remove(struct platform_device *pdev)
-{
-	struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
-
-	rfkill_unregister(rfkill);
-	rfkill_free(rfkill);
-
-	return 0;
-}
-
-static struct platform_driver gta02_wlan_driver = {
-	.probe		= gta02_wlan_probe,
-	.remove		= gta02_wlan_remove,
-	.driver		= {
-		.name		= "gta02-pm-wlan",
-	},
-};
-
-static int __devinit gta02_wlan_init(void)
-{
-	return platform_driver_register(&gta02_wlan_driver);
-}
-
-static void gta02_wlan_exit(void)
-{
-	platform_driver_unregister(&gta02_wlan_driver);
-}
-
-module_init(gta02_wlan_init);
-module_exit(gta02_wlan_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
-MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
deleted file mode 100644
index f15180ac07..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
+++ /dev/null
@@ -1 +0,0 @@
-extern int gta02_pm_gps_is_on(void);
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h
deleted file mode 100644
index 07c0728030..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-gsm.h
+++ /dev/null
@@ -1 +0,0 @@
-extern int gta_gsm_interrupts;
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
deleted file mode 100644
index 4836978970..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __MACH_GTA02_PM_WLAN_H
-#define __MACH_GTA02_PM_WLAN_H
-
-void gta02_wlan_reset(int assert_reset);
-int gta02_wlan_query_rfkill_lock(void);
-void gta02_wlan_query_rfkill_unlock(void);
-void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
-void gta02_wlan_clear_rfkill_cb(void);
-
-#endif /* __MACH_GTA02_PM_WLAN_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
deleted file mode 100644
index 3d7606e9ba..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ /dev/null
@@ -1,89 +0,0 @@
-#ifndef _GTA02_H
-#define _GTA02_H
-
-#include <mach/regs-gpio.h>
-#include <mach/gpio.h>
-#include <mach/irqs.h>
-
-/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
-#define GTA02v1_SYSTEM_REV	0x00000310
-#define GTA02v2_SYSTEM_REV	0x00000320
-#define GTA02v3_SYSTEM_REV	0x00000330
-#define GTA02v4_SYSTEM_REV	0x00000340
-#define GTA02v5_SYSTEM_REV	0x00000350
-#define GTA02v6_SYSTEM_REV	0x00000360
-
-#define GTA02_GPIO_n3DL_GSM	S3C2410_GPA13	/* v1 + v2 + v3 only */
-
-#define GTA02_GPIO_PWR_LED1	S3C2410_GPB0
-#define GTA02_GPIO_PWR_LED2	S3C2410_GPB1
-#define GTA02_GPIO_AUX_LED	S3C2410_GPB2
-#define GTA02_GPIO_VIBRATOR_ON	S3C2410_GPB3
-#define GTA02_GPIO_MODEM_RST	S3C2410_GPB5
-#define GTA02_GPIO_BT_EN	S3C2410_GPB6
-#define GTA02_GPIO_MODEM_ON	S3C2410_GPB7
-#define GTA02_GPIO_EXTINT8	S3C2410_GPB8
-#define GTA02_GPIO_USB_PULLUP	S3C2410_GPB9
-
-#define GTA02_GPIO_PIO5		S3C2410_GPC5	/* v3 + v4 only */
-#define GTA02v3_GPIO_nG1_CS	S3C2410_GPD12	/* v3 + v4 only */
-#define GTA02v3_GPIO_nG2_CS	S3C2410_GPD13	/* v3 + v4 only */
-#define GTA02v5_GPIO_HDQ	S3C2410_GPD14   /* v5 + */
-
-#define GTA02_GPIO_nG1_INT	S3C2410_GPF0
-#define GTA02_GPIO_IO1		S3C2410_GPF1
-#define GTA02_GPIO_PIO_2	S3C2410_GPF2	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_JACK_INSERT	S3C2410_GPF4
-#define GTA02_GPIO_WLAN_GPIO1	S3C2410_GPF5	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_AUX_KEY	S3C2410_GPF6
-#define GTA02_GPIO_HOLD_KEY	S3C2410_GPF7
-
-#define GTA02_GPIO_3D_IRQ	S3C2410_GPG4
-#define GTA02v2_GPIO_nG2_INT	S3C2410_GPG8	/* v2 + v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_OC	S3C2410_GPG9	/* v3 + v4 only */
-#define GTA02v3_GPIO_nUSB_FLT	S3C2410_GPG10	/* v3 + v4 only */
-#define GTA02v3_GPIO_nGSM_OC	S3C2410_GPG11	/* v3 + v4 only */
-
-#define GTA02_GPIO_AMP_SHUT	S3C2440_GPJ1	/* v2 + v3 + v4 only */
-#define GTA02v1_GPIO_WLAN_GPIO10	S3C2440_GPJ2
-#define GTA02_GPIO_HP_IN	S3C2440_GPJ2	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_INT0		S3C2440_GPJ3	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nGSM_EN	S3C2440_GPJ4
-#define GTA02_GPIO_3D_RESET	S3C2440_GPJ5
-#define GTA02_GPIO_nDL_GSM	S3C2440_GPJ6	/* v4 + v5 only */
-#define GTA02_GPIO_WLAN_GPIO0	S3C2440_GPJ7
-#define GTA02v1_GPIO_BAT_ID	S3C2440_GPJ8
-#define GTA02_GPIO_KEEPACT	S3C2440_GPJ8
-#define GTA02v1_GPIO_HP_IN	S3C2440_GPJ10
-#define GTA02_CHIP_PWD		S3C2440_GPJ11	/* v2 + v3 + v4 only */
-#define GTA02_GPIO_nWLAN_RESET	S3C2440_GPJ12	/* v2 + v3 + v4 only */
-
-#define GTA02_IRQ_GSENSOR_1	IRQ_EINT0
-#define GTA02_IRQ_MODEM		IRQ_EINT1
-#define GTA02_IRQ_PIO_2		IRQ_EINT2	/* v2 + v3 + v4 only */
-#define GTA02_IRQ_nJACK_INSERT	IRQ_EINT4
-#define GTA02_IRQ_WLAN_GPIO1	IRQ_EINT5
-#define GTA02_IRQ_AUX		IRQ_EINT6
-#define GTA02_IRQ_nHOLD		IRQ_EINT7
-#define GTA02_IRQ_PCF50633	IRQ_EINT9
-#define GTA02_IRQ_3D		IRQ_EINT12
-#define GTA02_IRQ_GSENSOR_2	IRQ_EINT16	/* v2 + v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_OC	IRQ_EINT17	/* v3 + v4 only */
-#define GTA02v3_IRQ_nUSB_FLT	IRQ_EINT18	/* v3 + v4 only */
-#define GTA02v3_IRQ_nGSM_OC	IRQ_EINT19	/* v3 + v4 only */
-
-/* returns 00 000 on GTA02 A5 and earlier, A6 returns 01 001 */
-#define GTA02_PCB_ID1_0		S3C2410_GPC13
-#define GTA02_PCB_ID1_1		S3C2410_GPC15
-#define GTA02_PCB_ID1_2		S3C2410_GPD0
-#define GTA02_PCB_ID2_0		S3C2410_GPD3
-#define GTA02_PCB_ID2_1		S3C2410_GPD4
-
-#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
-#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + x)
-
-int gta02_get_pcb_revision(void);
-
-extern struct pcf50633 *gta02_pcf;
-
-#endif /* _GTA02_H */
diff --git a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c b/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
deleted file mode 100644
index 49ab6c43b3..0000000000
--- a/target/linux/s3c24xx/files-2.6.30/arch/arm/mach-s3c2442/mach-gta02.c
+++ /dev/null
@@ -1,1806 +0,0 @@
-/*
- * linux/arch/arm/mach-s3c2442/mach-gta02.c
- *
- * S3C2442 Machine Support for the Openmoko Freerunner (GTA02)
- *
- * Copyright (C) 2006-2007 by Openmoko, Inc.
- * Author: Harald Welte <laforge@openmoko.org>
- * All rights reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/list.h>
-#include <linux/delay.h>
-#include <linux/timer.h>
-#include <linux/init.h>
-#include <linux/workqueue.h>
-#include <linux/platform_device.h>
-#include <linux/serial_core.h>
-#include <linux/spi/spi.h>
-#include <linux/spi/spi_gpio.h>
-#include <linux/spi/spi_bitbang.h>
-#include <linux/mmc/host.h>
-#include <linux/leds.h>
-#include <linux/gpio_keys.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-
-#include <linux/i2c.h>
-#include <linux/backlight.h>
-#include <linux/regulator/machine.h>
-
-#include <linux/mfd/pcf50633/core.h>
-#include <linux/mfd/pcf50633/mbc.h>
-#include <linux/mfd/pcf50633/adc.h>
-#include <linux/mfd/pcf50633/gpio.h>
-#include <linux/mfd/pcf50633/pmic.h>
-
-#include <linux/lis302dl.h>
-
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-#include <asm/mach/irq.h>
-
-#include <mach/hardware.h>
-#include <mach/io.h>
-#include <asm/irq.h>
-#include <asm/mach-types.h>
-
-#include <mach/regs-irq.h>
-#include <mach/regs-gpio.h>
-#include <mach/regs-gpioj.h>
-#include <mach/fb.h>
-#include <mach/mci.h>
-#include <mach/ts.h>
-#include <mach/spi.h>
-#include <mach/spi-gpio.h>
-#include <mach/regs-mem.h>
-#include <plat/pwm.h>
-#include <mach/cpu.h>
-
-#include <mach/gta02.h>
-
-#include <plat/regs-serial.h>
-#include <plat/nand.h>
-#include <plat/devs.h>
-#include <plat/cpu.h>
-#include <plat/pm.h>
-#include <plat/udc.h>
-#include <plat/iic.h>
-#include <plat/usb-control.h>
-#include <plat/regs-timer.h>
-#include <plat/gpio-core.h>
-
-#include <mach/gta02-pm-gsm.h>
-#include <mach/gta02-pm-gps.h>
-#include <mach/gta02-pm-wlan.h>
-
-#include <linux/jbt6k74.h>
-#include <linux/glamofb.h>
-#include <linux/mfd/glamo.h>
-
-#include <linux/hdq.h>
-#include <linux/bq27000_battery.h>
-
-#include <linux/touchscreen/ts_filter_chain.h>
-#ifdef CONFIG_TOUCHSCREEN_FILTER
-#include <linux/touchscreen/ts_filter_linear.h>
-#include <linux/touchscreen/ts_filter_mean.h>
-#include <linux/touchscreen/ts_filter_median.h>
-#include <linux/touchscreen/ts_filter_group.h>
-#endif
-
-#include <asm/fiq.h>
-
-#include <linux/gta02-vibrator.h>
-
-/* arbitrates which sensor IRQ owns the shared SPI bus */
-static spinlock_t motion_irq_lock;
-
-
-/* -------------------------------------------------------------------------------
- * GTA02 FIQ related
- *
- * Calls into vibrator and hdq and based on the return values
- * determines if we the FIQ source be kept alive
- */
-
-#define DIVISOR_FROM_US(x) ((x) << 3)
-
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
-extern int hdq_fiq_handler(void);
-#endif
-
-#ifdef CONFIG_LEDS_GTA02_VIBRATOR
-#define FIQ_DIVISOR_VIBRATOR DIVISOR_FROM_US(100)
-extern int gta02_vibrator_fiq_handler(void);
-#endif
-
-#if defined(CONFIG_LEDS_GTA02_VIBRATOR) || defined(CONFIG_HDQ_GPIO_BITBANG)
-
-/* Global data related to our fiq source */
-static u32 gta02_fiq_ack_mask;
-static struct s3c2410_pwm gta02_fiq_pwm_timer;
-static u16 gta02_fiq_timer_index;
-static int gta02_fiq_irq;
-
-static void gta02_fiq_handler(void)
-{
-	u16 divisor = 0xffff;
-
-	/* Vibrator servicing */
-
-	/* disable further timer interrupts if nobody has any work
-	 * or adjust rate according to who still has work
-	 *
-	 * CAUTION: it means forground code must disable FIQ around
-	 * its own non-atomic S3C2410_INTMSK changes... not common
-	 * thankfully and taken care of by the fiq-basis patch
-	 */
-
-#ifdef CONFIG_LEDS_GTA02_VIBRATOR
-	if (gta02_vibrator_fiq_handler())
-		divisor = FIQ_DIVISOR_VIBRATOR;
-#endif
-
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-	if (hdq_fiq_handler())
-		divisor = FIQ_DIVISOR_HDQ;
-#endif
-
-	if (divisor == 0xffff) /* mask the fiq irq source */
-		__raw_writel(__raw_readl(S3C2410_INTMSK) | gta02_fiq_ack_mask,
-			     S3C2410_INTMSK);
-	else /* still working, maybe at a different rate */
-		__raw_writel(divisor, S3C2410_TCNTB(gta02_fiq_timer_index));
-
-	__raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
-}
-
-static void gta02_fiq_kick(void)
-{
-	unsigned long flags;
-	u32 tcon;
-
-	/* we have to take care about FIQ because this modification is
-	 * non-atomic, FIQ could come in after the read and before the
-	 * writeback and its changes to the register would be lost
-	 * (platform INTMSK mod code is taken care of already)
-	 */
-	local_save_flags(flags);
-	local_fiq_disable();
-	/* allow FIQs to resume */
-	__raw_writel(__raw_readl(S3C2410_INTMSK) &
-		     ~(1 << (gta02_fiq_irq - S3C2410_CPUIRQ_OFFSET)),
-		     S3C2410_INTMSK);
-	tcon = __raw_readl(S3C2410_TCON) & ~S3C2410_TCON_T3START;
-	/* fake the timer to a count of 1 */
-	__raw_writel(1, S3C2410_TCNTB(gta02_fiq_timer_index));
-	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD, S3C2410_TCON);
-	__raw_writel(tcon | S3C2410_TCON_T3MANUALUPD | S3C2410_TCON_T3START,
-		     S3C2410_TCON);
-	__raw_writel(tcon | S3C2410_TCON_T3START, S3C2410_TCON);
-	local_irq_restore(flags);
-}
-
-static int gta02_fiq_enable(void)
-{
-	int irq_index_fiq = IRQ_TIMER3;
-	int rc = 0;
-
-	local_fiq_disable();
-
-	gta02_fiq_irq = irq_index_fiq;
-	gta02_fiq_ack_mask = 1 << (irq_index_fiq - S3C2410_CPUIRQ_OFFSET);
-	gta02_fiq_timer_index = (irq_index_fiq - IRQ_TIMER0);
-
-	/* set up the timer to operate as a pwm device */
-
-	rc = s3c2410_pwm_init(&gta02_fiq_pwm_timer);
-	if (rc)
-		goto bail;
-
-	gta02_fiq_pwm_timer.timerid = PWM0 + gta02_fiq_timer_index;
-	gta02_fiq_pwm_timer.prescaler = (6 - 1) / 2;
-	gta02_fiq_pwm_timer.divider = S3C2410_TCFG1_MUX3_DIV2;
-	/* default rate == ~32us */
-	gta02_fiq_pwm_timer.counter = gta02_fiq_pwm_timer.comparer = 3000;
-
-	rc = s3c2410_pwm_enable(&gta02_fiq_pwm_timer);
-	if (rc)
-		goto bail;
-
-	s3c2410_pwm_start(&gta02_fiq_pwm_timer);
-
-	/* let our selected interrupt be a magic FIQ interrupt */
-	__raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
-
-	/* it's ready to go as soon as we unmask the source in S3C2410_INTMSK */
-	local_fiq_enable();
-
-	set_fiq_c_handler(gta02_fiq_handler);
-
-	return 0;
-
-bail:
-	printk(KERN_ERR "Could not initialize FIQ for GTA02: %d\n", rc);
-
-	return rc;
-}
-
-static void gta02_fiq_disable(void)
-{
-	__raw_writel(0, S3C2410_INTMOD);
-	local_fiq_disable();
-	gta02_fiq_irq = 0; /* no active source interrupt now either */
-
-}
-/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
-
-#endif
-
-/*
- * this gets called every 1ms when we paniced.
- */
-
-static long gta02_panic_blink(long count)
-{
-	long delay = 0;
-	static long last_blink;
-	static char led;
-
-	if (count - last_blink < 100) /* 200ms period, fast blink */
-		return 0;
-
-	led ^= 1;
-	s3c2410_gpio_cfgpin(GTA02_GPIO_AUX_LED, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(GTA02_GPIO_AUX_LED, led);
-
-	last_blink = count;
-	return delay;
-}
-
-
-/**
- * returns PCB revision information in b9,b8 and b2,b1,b0
- * Pre-GTA02 A6 returns 0x000
- *     GTA02 A6 returns 0x101
- *     ...
- */
-
-int gta02_get_pcb_revision(void)
-{
-	int n;
-	int u = 0;
-	static unsigned long pinlist[] = {
-		GTA02_PCB_ID1_0,
-		GTA02_PCB_ID1_1,
-		GTA02_PCB_ID1_2,
-		GTA02_PCB_ID2_0,
-		GTA02_PCB_ID2_1,
-	};
-	static int pin_offset[] = {
-		0, 1, 2, 8, 9
-	};
-
-	for (n = 0 ; n < ARRAY_SIZE(pinlist); n++) {
-		/*
-		 * set the PCB version GPIO to be pulled-down input
-		 * force low briefly first
-		 */
-		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
-		s3c2410_gpio_setpin(pinlist[n], 0);
-		/* misnomer: it is a pullDOWN in 2442 */
-		s3c2410_gpio_pullup(pinlist[n], 1);
-		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_INPUT);
-
-		udelay(10);
-
-		if (s3c2410_gpio_getpin(pinlist[n]))
-			u |= 1 << pin_offset[n];
-
-		/*
-		* when not being interrogated, all of the revision GPIO
-		* are set to output HIGH without pulldown so no current flows
-		* if they are NC or pulled up.
-		*/
-		s3c2410_gpio_setpin(pinlist[n], 1);
-		s3c2410_gpio_cfgpin(pinlist[n], S3C2410_GPIO_OUTPUT);
-		/* misnomer: it is a pullDOWN in 2442 */
-		s3c2410_gpio_pullup(pinlist[n], 0);
-	}
-
-	return u;
-}
-
-struct platform_device gta02_resume_reason_device = {
-	.name 		= "gta02-resume",
-	.num_resources	= 0,
-};
-
-static struct map_desc gta02_iodesc[] __initdata = {
-	{
-		.virtual	= 0xe0000000,
-		.pfn		= __phys_to_pfn(S3C2410_CS3+0x01000000),
-		.length		= SZ_1M,
-		.type		= MT_DEVICE
-	},
-};
-
-#define UCON (S3C2410_UCON_DEFAULT | S3C2443_UCON_RXERR_IRQEN)
-#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB
-#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE
-
-static struct s3c2410_uartcfg gta02_uartcfgs[] = {
-	[0] = {
-		.hwport	     = 0,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[1] = {
-		.hwport	     = 1,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-	[2] = {
-		.hwport	     = 2,
-		.flags	     = 0,
-		.ucon	     = UCON,
-		.ulcon	     = ULCON,
-		.ufcon	     = UFCON,
-	},
-
-};
-
-struct pcf50633 *gta02_pcf;
-
-#ifdef CONFIG_CHARGER_PCF50633
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-static int gta02_get_charger_online_status(void)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-
-	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
-}
-
-static int gta02_get_charger_active_status(void)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-
-	return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
-}
-#endif
-
-#define ADC_NOM_CHG_DETECT_1A 6
-#define ADC_NOM_CHG_DETECT_USB 43
-
-static void
-gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
-{
-	int  ma;
-
-	/* Interpret charger type */
-	if (res < ((ADC_NOM_CHG_DETECT_USB + ADC_NOM_CHG_DETECT_1A) / 2)) {
-
-		/* Stop GPO driving out now that we have a IA charger */
-		pcf50633_gpio_set(pcf, PCF50633_GPO, 0);
-
-		ma = 1000;
-	} else
-		ma = 100;
-
-	pcf50633_mbc_usb_curlim_set(pcf, ma);
-}
-
-static struct delayed_work gta02_charger_work;
-static int gta02_usb_vbus_draw;
-
-static void gta02_charger_worker(struct work_struct *work)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-
-	if (gta02_usb_vbus_draw) {
-		pcf50633_mbc_usb_curlim_set(pcf, gta02_usb_vbus_draw);
-		return;
-	} else {
-#ifdef CONFIG_PCF50633_ADC
-		pcf50633_adc_async_read(pcf,
-			PCF50633_ADCC1_MUX_ADCIN1,
-			PCF50633_ADCC1_AVERAGE_16,
-			gta02_configure_pmu_for_charger, NULL);
-#else
-		/* If the PCF50633 ADC is disabled we fallback to a 100mA limit for safety. */
-		pcf50633_mbc_usb_curlim_set(pcf, 100);
-#endif
-		return;
-	}
-}
-
-#define GTA02_CHARGER_CONFIGURE_TIMEOUT ((3000 * HZ) / 1000)
-static void gta02_pmu_event_callback(struct pcf50633 *pcf, int irq)
-{
-	if (irq == PCF50633_IRQ_USBINS) {
-		schedule_delayed_work(&gta02_charger_work,
-				GTA02_CHARGER_CONFIGURE_TIMEOUT);
-		return;
-	} else if (irq == PCF50633_IRQ_USBREM) {
-		cancel_delayed_work_sync(&gta02_charger_work);
-		gta02_usb_vbus_draw = 0;
-	}
-}
-
-static void gta02_pmu_force_shutdown(struct pcf50633 *pcf)
-{
-	pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_OOCSHDWN,
-			PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
-}
-
-
-static void gta02_udc_vbus_draw(unsigned int ma)
-{
-	if (!gta02_pcf)
-		return;
-
-	gta02_usb_vbus_draw = ma;
-
-	schedule_delayed_work(&gta02_charger_work,
-				GTA02_CHARGER_CONFIGURE_TIMEOUT);
-}
-
-static int gta02_udc_vbus_status(void)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-	if (!gta02_pcf)
-		return -ENODEV;
-
-	return !!(pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE);
-}
-
-#else /* !CONFIG_CHARGER_PCF50633 */
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-#define gta02_get_charger_online_status NULL
-#define gta02_get_charger_active_status NULL
-#endif
-#define gta02_pmu_event_callback        NULL
-#define gta02_udc_vbus_draw             NULL
-#define gta02_udc_vbus_status		NULL
-#endif
-
-
-static struct platform_device gta02_pm_gps_dev = {
-	.name		= "gta02-pm-gps",
-};
-
-static struct platform_device gta02_pm_bt_dev = {
-	.name		= "gta02-pm-bt",
-};
-
-static struct platform_device gta02_pm_gsm_dev = {
-	.name		= "gta02-pm-gsm",
-};
-
-static struct platform_device gta02_pm_wlan_dev = {
-	.name		= "gta02-pm-wlan",
-};
-
-/* this is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device.  Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent.  This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static struct platform_device gta02_glamo_dev;
-static void mangle_glamo_res_by_system_rev(void);
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf);
-static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id);
-
-static struct regulator_consumer_supply ldo4_consumers[] = {
-	{
-		.dev = &gta02_pm_bt_dev.dev,
-		.supply = "BT_3V2",
-	},
-};
-
-static struct regulator_consumer_supply ldo5_consumers[] = {
-	{
-		.dev = &gta02_pm_gps_dev.dev,
-		.supply = "RF_3V",
-	},
-};
-
-static struct regulator_consumer_supply hcldo_consumers[] = {
-	{
-		.dev = &gta02_glamo_dev.dev,
-		.supply = "SD_3V3",
-	},
-};
-
-static char *gta02_batteries[] = {
-	"battery",
-};
-
-#ifdef CONFIG_CHARGER_PCF50633
-
-struct pcf50633_platform_data gta02_pcf_pdata = {
-	.resumers = {
-		[0] = 	PCF50633_INT1_USBINS |
-			PCF50633_INT1_USBREM |
-			PCF50633_INT1_ALARM,
-		[1] = 	PCF50633_INT2_ONKEYF,
-		[2] = 	PCF50633_INT3_ONKEY1S,
-		[3] = 	PCF50633_INT4_LOWSYS |
-			PCF50633_INT4_LOWBAT |
-			PCF50633_INT4_HIGHTMP,
-	},
-
-	.batteries = gta02_batteries,
-	.num_batteries = ARRAY_SIZE(gta02_batteries),
-	.charging_restart_interval = (900 * HZ),
-	.chg_ref_current_ma = 1000,
-
-	.reg_init_data = {
-		[PCF50633_REGULATOR_AUTO] = {
-			.constraints = {
-				.name = "IO_3V3",
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.boot_on = 1,
-				.always_on = 1,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_DOWN1] = {
-			.constraints = {
-				.name = "CORE_1V3",
-				.min_uV = 1300000,
-				.max_uV = 1600000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.boot_on = 1,
-				.always_on = 1,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_DOWN2] = {
-			.constraints = {
-				.name = "IO_1V8",
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.boot_on = 1,
-				.always_on = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_HCLDO] = {
-			.constraints = {
-				.name = "SD_3V3",
-				.min_uV = 2000000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
-				.boot_on = 1,
-			},
-			.num_consumer_supplies = 1,
-			.consumer_supplies = hcldo_consumers,
-		},
-		[PCF50633_REGULATOR_LDO1] = {
-			.constraints = {
-				.name = "GSENSOR_3V3",
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_LDO2] = {
-			.constraints = {
-				.name = "CODEC_3V3",
-				.min_uV = 3300000,
-				.max_uV = 3300000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_LDO3] = {
-			.constraints = {
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_LDO4] = {
-			.constraints = {
-				.name = "BT_3V2",
-				.min_uV = 3200000,
-				.max_uV = 3200000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 1,
-			.consumer_supplies = ldo4_consumers,
-		},
-		[PCF50633_REGULATOR_LDO5] = {
-			.constraints = {
-				.name = "RF_3V",
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-			.num_consumer_supplies = 1,
-			.consumer_supplies = ldo5_consumers,
-		},
-		[PCF50633_REGULATOR_LDO6] = {
-			.constraints = {
-				.name = "LCM_3V",
-				.min_uV = 3000000,
-				.max_uV = 3000000,
-				.always_on = 1,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.apply_uV = 1,
-			},
-			.num_consumer_supplies = 0,
-		},
-		[PCF50633_REGULATOR_MEMLDO] = {
-			.constraints = {
-				.min_uV = 1800000,
-				.max_uV = 1800000,
-				.valid_modes_mask = REGULATOR_MODE_NORMAL,
-				.state_mem = {
-					.enabled = 1,
-				},
-			},
-			.num_consumer_supplies = 0,
-		},
-
-	},
-	.probe_done = gta02_pmu_attach_child_devices,
-	.regulator_registered = gta02_pmu_regulator_registered,
-	.mbc_event_callback = gta02_pmu_event_callback,
-	.force_shutdown = gta02_pmu_force_shutdown,
-};
-
-static void mangle_pmu_pdata_by_system_rev(void)
-{
-	struct regulator_init_data *reg_init_data;
-
-	reg_init_data = gta02_pcf_pdata.reg_init_data;
-
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v1_SYSTEM_REV:
-		/* FIXME: this is only in v1 due to wrong PMU variant */
-		reg_init_data[PCF50633_REGULATOR_DOWN2]
-					.constraints.state_mem.enabled = 1;
-
-		reg_init_data[PCF50633_REGULATOR_LDO1]
-					.constraints.min_uV = 1300000;
-		reg_init_data[PCF50633_REGULATOR_LDO1]
-					.constraints.max_uV = 1300000;
-
-		reg_init_data[PCF50633_REGULATOR_LDO5]
-					.constraints.min_uV = 1500000;
-		reg_init_data[PCF50633_REGULATOR_LDO5]
-					.constraints.max_uV = 1500000;
-
-		reg_init_data[PCF50633_REGULATOR_LDO6]
-					.constraints.min_uV = 0;
-		reg_init_data[PCF50633_REGULATOR_LDO6]
-					.constraints.max_uV = 3300000;
-		reg_init_data[PCF50633_REGULATOR_LDO6]
-					.constraints.apply_uV = 1;
-		break;
-	default:
-		break;
-	}
-}
-
-#endif
-
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-/* BQ27000 Battery */
-
-struct bq27000_platform_data bq27000_pdata = {
-	.name = "battery",
-	.rsense_mohms = 20,
-	.hdq_read = hdq_read,
-	.hdq_write = hdq_write,
-	.hdq_initialized = hdq_initialized,
-	.get_charger_online_status = gta02_get_charger_online_status,
-	.get_charger_active_status = gta02_get_charger_active_status
-};
-
-struct platform_device bq27000_battery_device = {
-	.name 		= "bq27000-battery",
-	.dev = {
-		.platform_data = &bq27000_pdata,
-	},
-};
-
-/* HDQ */
-
-static void gta02_hdq_attach_child_devices(struct device *parent_device)
-{
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v5_SYSTEM_REV:
-	case GTA02v6_SYSTEM_REV:
-		bq27000_battery_device.dev.parent = parent_device;
-		platform_device_register(&bq27000_battery_device);
-		break;
-	default:
-		break;
-	}
-}
-
-static void gta02_hdq_gpio_direction_out(void)
-{
-	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
-}
-
-static void gta02_hdq_gpio_direction_in(void)
-{
-	s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
-}
-
-static void gta02_hdq_gpio_set_value(int val)
-{
-
-	s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
-}
-
-static int gta02_hdq_gpio_get_value(void)
-{
-	return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
-}
-
-static struct resource gta02_hdq_resources[] = {
-	[0] = {
-		.start	= GTA02v5_GPIO_HDQ,
-		.end	= GTA02v5_GPIO_HDQ,
-	},
-};
-
-struct hdq_platform_data gta02_hdq_platform_data = {
-	.attach_child_devices = gta02_hdq_attach_child_devices,
-	.gpio_dir_out = gta02_hdq_gpio_direction_out,
-	.gpio_dir_in = gta02_hdq_gpio_direction_in,
-	.gpio_set = gta02_hdq_gpio_set_value,
-	.gpio_get = gta02_hdq_gpio_get_value,
-
-	.enable_fiq = gta02_fiq_enable,
-	.disable_fiq = gta02_fiq_disable,
-	.kick_fiq = gta02_fiq_kick,
-
-};
-
-struct platform_device gta02_hdq_device = {
-	.name 		= "hdq",
-	.num_resources	= 1,
-	.resource	= gta02_hdq_resources,
-	.dev		= {
-		.platform_data = &gta02_hdq_platform_data,
-	},
-};
-#endif
-
-
-#ifdef CONFIG_LEDS_GTA02_VIBRATOR
-/* vibrator (child of FIQ) */
-
-static struct resource gta02_vibrator_resources[] = {
-	[0] = {
-		.start	= GTA02_GPIO_VIBRATOR_ON,
-		.end	= GTA02_GPIO_VIBRATOR_ON,
-	},
-};
-struct gta02_vib_platform_data gta02_vib_pdata = {
-	.enable_fiq = gta02_fiq_enable,
-	.disable_fiq = gta02_fiq_disable,
-	.kick_fiq = gta02_fiq_kick,
-};
-
-static struct platform_device gta02_vibrator_dev = {
-	.name		= "gta02-vibrator",
-	.num_resources	= ARRAY_SIZE(gta02_vibrator_resources),
-	.resource	= gta02_vibrator_resources,
-	.dev	 = {
-		.platform_data = &gta02_vib_pdata,
-		},
-};
-#endif
-
-/* NOR Flash */
-
-#define GTA02_FLASH_BASE	S3C2410_CS3 /* GCS3 */
-#define GTA02_FLASH_SIZE	0x200000 /* 2MBytes */
-
-static struct physmap_flash_data gta02_nor_flash_data = {
-	.width		= 2,
-};
-
-static struct resource gta02_nor_flash_resource = {
-	.start		= GTA02_FLASH_BASE,
-	.end		= GTA02_FLASH_BASE + GTA02_FLASH_SIZE - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device gta02_nor_flash = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev		= {
-				.platform_data	= &gta02_nor_flash_data,
-			},
-	.resource	= &gta02_nor_flash_resource,
-	.num_resources	= 1,
-};
-
-
-struct platform_device s3c24xx_pwm_device = {
-	.name 		= "s3c24xx_pwm",
-	.num_resources	= 0,
-};
-
-static struct i2c_board_info gta02_i2c_devs[] __initdata = {
-	{
-		I2C_BOARD_INFO("pcf50633", 0x73),
-		.irq = GTA02_IRQ_PCF50633,
-		.platform_data = &gta02_pcf_pdata,
-	},
-	{
-		I2C_BOARD_INFO("wm8753", 0x1a),
-	},
-};
-
-static struct s3c2410_nand_set gta02_nand_sets[] = {
-	[0] = {
-		.name		= "neo1973-nand",
-		.nr_chips	= 1,
-		.flags		= S3C2410_NAND_BBT,
-	},
-};
-
-/* choose a set of timings derived from S3C@2442B MCP54 
- * data sheet (K5D2G13ACM-D075 MCP Memory)
- */
-
-static struct s3c2410_platform_nand gta02_nand_info = {
-	.tacls		= 0,
-	.twrph0		= 25,
-	.twrph1		= 15,
-	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
-	.sets		= gta02_nand_sets,
-	.software_ecc	= 1,
-};
-
-
-static void gta02_s3c_mmc_set_power(unsigned char power_mode,
-    unsigned short vdd)
-{
-	static int is_on = -1;
-	int on;
-
-	on = power_mode == MMC_POWER_ON || power_mode == MMC_POWER_UP;
-	if (is_on != on)
-		gta02_wlan_reset(!on);
-	is_on = on;
-}
-
-
-static struct s3c24xx_mci_pdata gta02_s3c_mmc_cfg = {
-	.set_power	= gta02_s3c_mmc_set_power,
-};
-
-static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
-{
-	switch (cmd) {
-	case S3C2410_UDC_P_ENABLE:
-		printk(KERN_DEBUG "%s S3C2410_UDC_P_ENABLE\n", __func__);
-	    s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 1);
-		break;
-	case S3C2410_UDC_P_DISABLE:
-		printk(KERN_DEBUG "%s S3C2410_UDC_P_DISABLE\n", __func__);
-		s3c2410_gpio_setpin(GTA02_GPIO_USB_PULLUP, 0);
-		break;
-	case S3C2410_UDC_P_RESET:
-		printk(KERN_DEBUG "%s S3C2410_UDC_P_RESET\n", __func__);
-		/* FIXME! */
-		break;
-	default:
-		break;
-	}
-}
-
-/* get PMU to set USB current limit accordingly */
-
-static struct s3c2410_udc_mach_info gta02_udc_cfg = {
-	.vbus_draw	= gta02_udc_vbus_draw,
-	.udc_command	= gta02_udc_command,
-/*	.get_vbus_status = gta02_udc_vbus_status,*/
-};
-
-
-/* Touchscreen configuration. */
-
-#ifdef CONFIG_TOUCHSCREEN_FILTER
-const static struct ts_filter_group_configuration gta02_ts_group = {
-	.length = 12,
-	.close_enough = 10,
-	.threshold = 6,		/* At least half of the points in a group. */
-	.attempts = 10,
-};
-
-const static struct ts_filter_median_configuration gta02_ts_median = {
-	.extent = 20,
-	.decimation_below = 3,
-	.decimation_threshold = 8 * 3,
-	.decimation_above = 4,
-};
-
-const static struct ts_filter_mean_configuration gta02_ts_mean = {
-	.length = 4,
-};
-
-const static struct ts_filter_linear_configuration gta02_ts_linear = {
-	.constants = {1, 0, 0, 0, 1, 0, 1},	/* Don't modify coords. */
-	.coord0 = 0,
-	.coord1 = 1,
-};
-#endif
-
-const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
-{
-#ifdef CONFIG_TOUCHSCREEN_FILTER
-	{&ts_filter_group_api,		&gta02_ts_group.config},
-	{&ts_filter_median_api,		&gta02_ts_median.config},
-	{&ts_filter_mean_api,		&gta02_ts_mean.config},
-	{&ts_filter_linear_api,		&gta02_ts_linear.config},
-#endif
-	{NULL, NULL},
-};
-
-const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
-	.delay = 10000,
-	.presc = 0xff, /* slow as we can go */
-	.filter_config = gta02_filter_configuration,
-};
-
-
-
-static void gta02_bl_set_intensity(int intensity)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-	int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-	int ret;
-
-	intensity >>= 2;
-
-	/*
-	 * One code path that leads here is from a kernel panic. Trying to turn
-	 * the backlight on just gives us a nearly endless stream of complaints
-	 * and accomplishes nothing. We can't win. Just give up.
-	 *
-	 * In the unlikely event that there's another path leading here while
-	 * we're atomic, we print at least a warning.
-	 */
-	if (in_atomic()) {
-		printk(KERN_ERR
-		    "gta02_bl_set_intensity called while atomic\n");
-		return;
-	}
-
-	if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
-		old_intensity = 0;
-	else
-		old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
-
-	if (intensity == old_intensity)
-		return;
-
-	/* We can't do this anywhere else */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
-
-	/*
-	 * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
-	 * if seen, you have to re-enable the LED unit
-	 */
-	if (!intensity || !old_intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
-
-	if (!intensity) /* illegal to set LEDOUT to 0 */
-		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-									     2);
-	else
-		ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
-			       intensity);
-
-	if (intensity)
-		pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
-
-}
-
-static struct generic_bl_info gta02_bl_info = {
-	.name 			= "gta02-bl",
-	.max_intensity 		= 0xff,
-	.default_intensity 	= 0xff,
-	.set_bl_intensity 	= gta02_bl_set_intensity,
-};
-
-static struct platform_device gta02_bl_dev = {
-	.name		  = "generic-bl",
-	.id		  = 1,
-	.dev = {
-		.platform_data = &gta02_bl_info,
-	},
-};
-
-/* SPI: LCM control interface attached to Glamo3362 */
-
-static void gta02_jbt6k74_reset(int devidx, int level)
-{
-	gpio_set_value(GTA02_GPIO_GLAMO(4), level);
-}
-
-static void gta02_jbt6k74_probe_completed(struct device *dev)
-{
-	struct pcf50633 *pcf = gta02_pcf;
-
-	/* Switch on backlight. Qi does not do it for us */
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDOUT, 0x01);
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x00);
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 0x01);
-	pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0x01);
-
-	gta02_bl_dev.dev.parent = dev;
-	platform_device_register(&gta02_bl_dev);
-}
-
-const struct jbt6k74_platform_data jbt6k74_pdata = {
-	.reset		= gta02_jbt6k74_reset,
-	.probe_completed = gta02_jbt6k74_probe_completed,
-};
-
-/*----------- SPI: Accelerometers attached to SPI of s3c244x ----------------- */
-
-void gta02_lis302dl_suspend_io(struct lis302dl_info *lis, int resume)
-{
-	struct lis302dl_platform_data *pdata = lis->pdata;
-
-	if (!resume) {
-		 /*
-		 * we don't want to power them with a high level
-		 * because GSENSOR_3V3 is not up during suspend
-		 */
-		s3c2410_gpio_setpin(pdata->pin_chip_select, 0);
-		s3c2410_gpio_setpin(pdata->pin_clk, 0);
-		s3c2410_gpio_setpin(pdata->pin_mosi, 0);
-		/* misnomer: it is a pullDOWN in 2442 */
-		s3c2410_gpio_pullup(pdata->pin_miso, 1);
-		return;
-	}
-
-	/* back to normal */
-	s3c2410_gpio_setpin(pdata->pin_chip_select, 1);
-	s3c2410_gpio_setpin(pdata->pin_clk, 1);
-	/* misnomer: it is a pullDOWN in 2442 */
-	s3c2410_gpio_pullup(pdata->pin_miso, 0);
-
-	s3c2410_gpio_cfgpin(pdata->pin_chip_select, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(pdata->pin_clk, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(pdata->pin_mosi, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_cfgpin(pdata->pin_miso, S3C2410_GPIO_INPUT);
-
-}
-
-struct lis302dl_platform_data lis302_pdata_top = {
-		.name		= "lis302-1 (top)",
-		.pin_chip_select= S3C2410_GPD12,
-		.pin_clk	= S3C2410_GPG7,
-		.pin_mosi	= S3C2410_GPG6,
-		.pin_miso	= S3C2410_GPG5,
-		.interrupt	= GTA02_IRQ_GSENSOR_1,
-		.open_drain	= 1, /* altered at runtime by PCB rev */
-		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
-};
-
-struct lis302dl_platform_data lis302_pdata_bottom = {
-		.name		= "lis302-2 (bottom)",
-		.pin_chip_select= S3C2410_GPD13,
-		.pin_clk	= S3C2410_GPG7,
-		.pin_mosi	= S3C2410_GPG6,
-		.pin_miso	= S3C2410_GPG5,
-		.interrupt	= GTA02_IRQ_GSENSOR_2,
-		.open_drain	= 1, /* altered at runtime by PCB rev */
-		.lis302dl_suspend_io = gta02_lis302dl_suspend_io,
-};
-
-static struct spi_board_info gta02_spi_board_info[] = {
-	{
-		.modalias	= "jbt6k74",
-		.platform_data	= &jbt6k74_pdata,
-		.controller_data = (void*)GTA02_GPIO_GLAMO(12),
-		/* irq */
-		.max_speed_hz	= 100 * 1000,
-		.bus_num	= 2,
-		.chip_select = 0
-	},
-	{
-		.modalias	= "lis302dl",
-		/* platform_data */
-		.platform_data	= &lis302_pdata_top,
-		/* controller_data */
-		/* irq */
-		.max_speed_hz	= 100 * 1000,
-		.bus_num	= 3,
-		.chip_select	= 0,
-	},
-
-	{
-		.modalias	= "lis302dl",
-		/* platform_data */
-		.platform_data	= &lis302_pdata_bottom,
-		/* controller_data */
-		/* irq */
-		.max_speed_hz	= 100 * 1000,
-		.bus_num	= 3,
-		.chip_select	= 1,
-	},
-
-};
-
-static void gta02_lis302_chip_select(struct s3c2410_spigpio_info *info, int csid, int cs)
-{
-
-	/*
-	 * Huh... "quirk"... CS on this device is not really "CS" like you can
-	 * expect.
-	 *
-	 * When it is 0 it selects SPI interface mode.
-	 * When it is 1 it selects I2C interface mode.
-	 *
-	 * Because we have 2 devices on one interface we have to make sure
-	 * that the "disabled" device (actually in I2C mode) don't think we're
-	 * talking to it.
-	 *
-	 * When we talk to the "enabled" device, the "disabled" device sees
-	 * the clocks as I2C clocks, creating havoc.
-	 *
-	 * I2C sees MOSI going LOW while CLK HIGH as a START action, thus we
-	 * must ensure this is never issued.
-	 */
-
-	int cs_gpio, other_cs_gpio;
-
-	cs_gpio = csid ? S3C2410_GPD13 : S3C2410_GPD12;
-	other_cs_gpio = (1 - csid) ? S3C2410_GPD13 : S3C2410_GPD12;
-	
-
-	if (cs == BITBANG_CS_ACTIVE) {
-		s3c2410_gpio_setpin(other_cs_gpio, 1);
-		s3c2410_gpio_setpin(cs_gpio, 1);
-		s3c2410_gpio_setpin(info->pin_clk, 1);
-		s3c2410_gpio_setpin(cs_gpio, 0);
-	} else {
-		s3c2410_gpio_setpin(cs_gpio, 1);
-		s3c2410_gpio_setpin(other_cs_gpio, 1);
-	} 
-}
-
-static struct s3c2410_spigpio_info gta02_spigpio_cfg = {
-	.pin_clk	= S3C2410_GPG7,
-	.pin_mosi	= S3C2410_GPG6,
-	.pin_miso	= S3C2410_GPG5,
-	.bus_num	= 3,
-	.num_chipselect	= 2,
-	.chip_select	= gta02_lis302_chip_select,
-	.non_blocking_transfer = 1,
-};
-
-static struct platform_device gta02_spi_gpio_dev = {
-	.name		= "spi_s3c24xx_gpio",
-	.dev = {
-		.platform_data = &gta02_spigpio_cfg,
-	},
-};
-
-/*----------- / SPI: Accelerometers attached to SPI of s3c244x ----------------- */
-
-static struct gpio_led gta02_gpio_leds[] = {
-	{
-		.name	= "gta02-power:orange",
-		.gpio	= GTA02_GPIO_PWR_LED1,
-	}, {
-		.name	= "gta02-power:blue",
-		.gpio	= GTA02_GPIO_PWR_LED2,
-	}, {
-		.name	= "gta02-aux:red",
-		.gpio	= GTA02_GPIO_AUX_LED,
-	},
-};
-
-static struct gpio_led_platform_data gta02_gpio_leds_pdata = {
-	.leds = gta02_gpio_leds,
-	.num_leds = ARRAY_SIZE(gta02_gpio_leds),
-};
-
-struct platform_device gta02_led_dev = {
-	.name = "leds-gpio",
-	.id   = -1,
-	.dev = {
-		.platform_data = &gta02_gpio_leds_pdata,
-	},
-};
-
-static struct gpio_keys_button gta02_buttons[] = {
-	{
-		.gpio = GTA02_GPIO_AUX_KEY,
-		.code = KEY_PHONE,
-		.desc = "Aux",
-		.type = EV_KEY,
-	},
-	{
-		.gpio = GTA02_GPIO_HOLD_KEY,
-		.code = KEY_PAUSE,
-		.desc = "Hold",
-		.type = EV_KEY,
-	},
-};
-
-static struct gpio_keys_platform_data gta02_buttons_pdata = {
-	.buttons = gta02_buttons,
-	.nbuttons = ARRAY_SIZE(gta02_buttons),
-};
-
-static struct platform_device gta02_button_dev = {
-	.name = "gpio-keys",
-	.id = -1,
-	.dev = {
-		.platform_data = &gta02_buttons_pdata,
-	},
-};
-
-static struct platform_device gta02_pm_usbhost_dev = {
-	.name		= "gta02-pm-host",
-};
-
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
-	.port[0]	= {
-		.flags	= S3C_HCDFLG_USED,
-	},
-	.port[1]	= {
-		.flags	= 0,
-	},
-};
-
-static int glamo_irq_is_wired(void)
-{
-	int rc;
-	int count = 0;
-
-	/*
-	* GTA02 S-Media IRQs prior to A5 are broken due to a lack of
-	* a pullup on the INT# line.  Check for the bad behaviour.
-	*/
-	s3c2410_gpio_setpin(S3C2410_GPG4, 0);
-	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_OUTP);
-	s3c2410_gpio_cfgpin(S3C2410_GPG4, S3C2410_GPG4_INP);
-	/*
-	* we force it low ourselves for a moment and resume being input.
-	* If there is a pullup, it won't stay low for long.  But if the
-	* level converter is there as on < A5 revision, the weak keeper
-	* on the input of the LC will hold the line low indefinitiely
-	*/
-	do
-		rc = s3c2410_gpio_getpin(S3C2410_GPG4);
-	while ((!rc) && ((count++) < 10));
-	if (rc) { /* it got pulled back up, it's good */
-		printk(KERN_INFO "Detected S-Media IRQ# pullup, "
-		"enabling interrupt\n");
-		return 0;
-	} else  /* Gah we can't work with this level converter */
-		printk(KERN_WARNING "** Detected bad IRQ# circuit found"
-		" on pre-A5 GTA02: S-Media interrupt disabled **\n");
-	return -ENODEV;
-}
-
-/* Smedia Glamo 3362 */
-
-/*
- * we crank down SD Card clock dynamically when GPS is powered
- */
-
-static int gta02_glamo_mci_use_slow(void)
-{
-	return gta02_pm_gps_is_on();
-}
-
-static void gta02_glamo_external_reset(int level)
-{
-	s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
-	s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
-}
-
-/*
-static struct fb_videomode gta02_glamo_modes[] = {
-	{
-		.name = "480x640",
-		.xres = 480,
-		.yres = 640,
-		.pixclock	= 40816,
-		.left_margin	= 8,
-		.right_margin	= 63,
-		.upper_margin	= 2,
-		.lower_margin	= 4,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}, {
-		.name = "240x320",
-		.xres = 240,
-		.yres = 320,
-		.pixclock	= 40816,
-		.left_margin	= 8,
-		.right_margin	= 88,
-		.upper_margin	= 2,
-		.lower_margin	= 2,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};*/
-
-static struct fb_videomode gta02_glamo_modes[] = {
-	{
-		.name = "480x640",
-		.xres = 480,
-		.yres = 640,
-		.pixclock	= 40816,
-		.left_margin	= 8,
-		.right_margin	= 16,
-		.upper_margin	= 2,
-		.lower_margin	= 16,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}, {
-		.name = "240x320",
-		.xres = 240,
-		.yres = 320,
-		.pixclock	= 40816,
-		.left_margin	= 8,
-		.right_margin	= 16,
-		.upper_margin	= 2,
-		.lower_margin	= 16,
-		.hsync_len	= 8,
-		.vsync_len	= 2,
-		.vmode = FB_VMODE_NONINTERLACED,
-	}
-};
-
-
-static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
-	.width  = 43,
-	.height = 58,
-
-	.num_modes = ARRAY_SIZE(gta02_glamo_modes),
-	.modes = gta02_glamo_modes,
-};
-
-static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
-	.glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
-};
-
-static struct glamo_platform_data gta02_glamo_pdata = {
-	.fb_data   = &gta02_glamo_fb_pdata,
-	.mmc_data  = &gta02_glamo_mmc_pdata,
-	.gpio_base = GTA02_GPIO_GLAMO_BASE,
-
-	.osci_clock_rate = 32768,
-
-	.glamo_irq_is_wired = glamo_irq_is_wired,
-	.glamo_external_reset = gta02_glamo_external_reset,
-};
-
-static struct resource gta02_glamo_resources[] = {
-	[0] = {
-		.start	= S3C2410_CS1,
-		.end	= S3C2410_CS1 + 0x1000000 - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= GTA02_IRQ_3D,
-		.end	= GTA02_IRQ_3D,
-		.flags	= IORESOURCE_IRQ,
-	},
-	[2] = {
-		.start = GTA02_GPIO_3D_RESET,
-		.end   = GTA02_GPIO_3D_RESET,
-	},
-};
-
-static struct platform_device gta02_glamo_dev = {
-	.name		= "glamo3362",
-	.num_resources	= ARRAY_SIZE(gta02_glamo_resources),
-	.resource	= gta02_glamo_resources,
-	.dev		= {
-		.platform_data	= &gta02_glamo_pdata,
-	},
-};
-
-static void mangle_glamo_res_by_system_rev(void)
-{
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v1_SYSTEM_REV:
-		break;
-	default:
-		gta02_glamo_resources[2].start = GTA02_GPIO_3D_RESET;
-		gta02_glamo_resources[2].end = GTA02_GPIO_3D_RESET;
-		break;
-	}
-
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v1_SYSTEM_REV:
-	case GTA02v2_SYSTEM_REV:
-	case GTA02v3_SYSTEM_REV:
-	/* case GTA02v4_SYSTEM_REV: - FIXME: handle this later */
-		/* The hardware is missing a pull-up resistor and thus can't
-		 * support the Smedia Glamo IRQ */
-		gta02_glamo_resources[1].start = 0;
-		gta02_glamo_resources[1].end = 0;
-		break;
-	}
-}
-
-struct spi_gpio_platform_data spigpio_platform_data = {
-	.sck = GTA02_GPIO_GLAMO(10),
-	.mosi = GTA02_GPIO_GLAMO(11),
-	.miso = GTA02_GPIO_GLAMO(5),
-	.num_chipselect = 1,
-};
-
-static struct platform_device spigpio_device = {
-	.name = "spi_gpio",
-	.id   = 2,
-	.dev = {
-		.platform_data = &spigpio_platform_data,
-		.parent        = &gta02_glamo_dev.dev,
-	},
-};
-
-static void __init gta02_map_io(void)
-{
-	s3c24xx_init_io(gta02_iodesc, ARRAY_SIZE(gta02_iodesc));
-	s3c24xx_init_clocks(12000000);
-	s3c24xx_init_uarts(gta02_uartcfgs, ARRAY_SIZE(gta02_uartcfgs));
-}
-
-static irqreturn_t gta02_modem_irq(int irq, void *param)
-{
-/*	printk(KERN_DEBUG "modem wakeup interrupt\n");*/
-	gta_gsm_interrupts++;
-	return IRQ_HANDLED;
-}
-
-static irqreturn_t ar6000_wow_irq(int irq, void *param)
-{
-/*	printk(KERN_DEBUG "ar6000_wow interrupt\n");*/
-	return IRQ_HANDLED;
-}
-
-/*
- * hardware_ecc=1|0
- */
-static char hardware_ecc_str[4] __initdata = "";
-
-static int __init hardware_ecc_setup(char *str)
-{
-	if (str)
-		strlcpy(hardware_ecc_str, str, sizeof(hardware_ecc_str));
-	return 1;
-}
-
-__setup("hardware_ecc=", hardware_ecc_setup);
-
-/* these are the guys that don't need to be children of PMU */
-
-static struct platform_device *gta02_devices[] __initdata = {
-	&s3c_device_usb,
-	&s3c_device_wdt,
-	&s3c_device_sdi,
-	&s3c_device_usbgadget,
-	&s3c_device_nand,
-	&gta02_nor_flash,
-
-	&s3c24xx_pwm_device,
-	&gta02_led_dev,
-	&gta02_pm_wlan_dev, /* not dependent on PMU */
-	&s3c_device_iis,
-	&s3c_device_i2c0,
-};
-
-/* these guys DO need to be children of PMU */
-
-static struct platform_device *gta02_devices_pmu_children[] = {
-	&s3c_device_ts, /* input 1 */
-	&gta02_pm_gsm_dev,
-	&gta02_pm_usbhost_dev,
-	&gta02_spi_gpio_dev, /* input 2 and 3 */
-	&gta02_button_dev, /* input 4 */
-	&gta02_resume_reason_device,
-};
-
-static void gta02_register_glamo(void)
-{
-	platform_device_register(&gta02_glamo_dev);
-	if (gpio_request(GTA02_GPIO_GLAMO(4), "jbt6k74 reset"))
-		printk("gta02: Failed to request jbt6k74 reset pin\n");
-	if (gpio_direction_output(GTA02_GPIO_GLAMO(4), 1))
-		printk("gta02: Failed to configure jbt6k74 reset pin\n");
-	platform_device_register(&spigpio_device);
-}
-
-static void gta02_pmu_regulator_registered(struct pcf50633 *pcf, int id)
-{
-	struct platform_device *regulator, *pdev;
-
-	gta02_pcf = pcf;
-
-	regulator = pcf->regulator_pdev[id];
-
-	switch(id) {
-		case PCF50633_REGULATOR_LDO4:
-			pdev = &gta02_pm_bt_dev;
-			break;
-		case PCF50633_REGULATOR_LDO5:
-			pdev = &gta02_pm_gps_dev;
-			break;
-		case PCF50633_REGULATOR_HCLDO:
-			gta02_register_glamo();
-			return;
-		default:
-			return;
-	}
-
-	pdev->dev.parent = &regulator->dev;
-	platform_device_register(pdev);
-}
-
-/* this is called when pc50633 is probed, unfortunately quite late in the
- * day since it is an I2C bus device.  Here we can belatedly define some
- * platform devices with the advantage that we can mark the pcf50633 as the
- * parent.  This makes them get suspended and resumed with their parent
- * the pcf50633 still around.
- */
-
-static void gta02_pmu_attach_child_devices(struct pcf50633 *pcf)
-{
-	int n;
-
-	for (n = 0; n < ARRAY_SIZE(gta02_devices_pmu_children); n++)
-		gta02_devices_pmu_children[n]->dev.parent = pcf->dev;
-
-	mangle_glamo_res_by_system_rev();
-	platform_add_devices(gta02_devices_pmu_children,
-					ARRAY_SIZE(gta02_devices_pmu_children));
-
-	regulator_has_full_constraints();
-}
-
-static void gta02_poweroff(void)
-{
-	pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN,
-		  PCF50633_OOCSHDWN_GOSTDBY, PCF50633_OOCSHDWN_GOSTDBY);
-}
-
-
-/* On hardware rev 5 and earlier the leds are missing a resistor and reading
- * from their gpio pins will always return 0, so we have to shadow the
- * led states software */
-static unsigned long gpb_shadow;
-extern struct s3c_gpio_chip s3c24xx_gpios[];
-
-static void gta02_gpb_set(struct gpio_chip *chip,
-			    unsigned offset, int value)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0);
-	unsigned long flags;
-	unsigned long dat;
-
-	local_irq_save(flags);
-
-	dat = __raw_readl(base + 0x04) | gpb_shadow;
-	dat &= ~(1 << offset);
-	gpb_shadow &= ~(1 << offset);
-	if (value) {
-		dat |= 1 << offset;
-		switch (offset) {
-		case 0 ... 2:
-			gpb_shadow |= 1 << offset;
-			break;
-		default:
-			break;
-		}
-	}
-	__raw_writel(dat, base + 0x04);
-
-	local_irq_restore(flags);
-}
-
-static int gta02_gpb_get(struct gpio_chip *chip, unsigned offset)
-{
-	void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB0);
-	unsigned long val;
-
-	val = __raw_readl(base + 0x04) | gpb_shadow;
-	val >>= offset;
-	val &= 1;
-
-	return val;
-}
-
-static void gta02_hijack_gpb(void) {
-    s3c24xx_gpios[1].chip.set = gta02_gpb_set;
-    s3c24xx_gpios[1].chip.get = gta02_gpb_get;
-}
-
-static void __init gta02_machine_init(void)
-{
-	int rc;
-
-	/* set the panic callback to make AUX blink fast */
-	panic_blink = gta02_panic_blink;
-
-	switch (S3C_SYSTEM_REV_ATAG) {
-	case GTA02v6_SYSTEM_REV:
-		/* we need push-pull interrupt from motion sensors */
-		lis302_pdata_top.open_drain = 0;
-		lis302_pdata_bottom.open_drain = 0;
-		break;
-	default:
-		break;
-	}
-	if (S3C_SYSTEM_REV_ATAG <= GTA02v5_SYSTEM_REV)
-		gta02_hijack_gpb();
-
-	spin_lock_init(&motion_irq_lock);
-
-#ifdef CONFIG_CHARGER_PCF50633
-	INIT_DELAYED_WORK(&gta02_charger_work, gta02_charger_worker);
-#endif
-
-	/* Glamo chip select optimization */
-/*	 *((u32 *)(S3C2410_MEMREG(((1 + 1) << 2)))) = 0x1280; */
-
-	/* do not force soft ecc if we are asked to use hardware_ecc */
-	if (hardware_ecc_str[0] == '1')
-		gta02_nand_info.software_ecc = 0;
-
-	s3c_device_usb.dev.platform_data = &gta02_usb_info;
-	s3c_device_nand.dev.platform_data = &gta02_nand_info;
-	s3c_device_sdi.dev.platform_data = &gta02_s3c_mmc_cfg;
-
-	/* acc sensor chip selects */
-	s3c2410_gpio_setpin(S3C2410_GPD12, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPD12, S3C2410_GPIO_OUTPUT);
-	s3c2410_gpio_setpin(S3C2410_GPD13, 1);
-	s3c2410_gpio_cfgpin(S3C2410_GPD13, S3C2410_GPIO_OUTPUT);
-
-
-	s3c24xx_udc_set_platdata(&gta02_udc_cfg);
-	s3c_i2c0_set_platdata(NULL);
-	set_s3c2410ts_info(&gta02_ts_cfg);
-
-	mangle_glamo_res_by_system_rev();
-
-	i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
-	spi_register_board_info(gta02_spi_board_info,
-				ARRAY_SIZE(gta02_spi_board_info));
-
-#ifdef CONFIG_CHARGER_PCF50633
-	mangle_pmu_pdata_by_system_rev();
-#endif
-
-	platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
-
-	s3c_pm_init();
-
-	/* Make sure the modem can wake us up */
-	set_irq_type(GTA02_IRQ_MODEM, IRQ_TYPE_EDGE_RISING);
-	rc = request_irq(GTA02_IRQ_MODEM, gta02_modem_irq, IRQF_DISABLED,
-			 "modem", NULL);
-	if (rc < 0)
-		printk(KERN_ERR "GTA02: can't request GSM modem wakeup IRQ\n");
-	enable_irq_wake(GTA02_IRQ_MODEM);
-
-	/* Make sure the wifi module can wake us up*/
-	set_irq_type(GTA02_IRQ_WLAN_GPIO1, IRQ_TYPE_EDGE_RISING);
-	rc = request_irq(GTA02_IRQ_WLAN_GPIO1, ar6000_wow_irq, IRQF_DISABLED,
-			"ar6000", NULL);
-
-	if (rc < 0)
-		printk(KERN_ERR "GTA02: can't request ar6k wakeup IRQ\n");
-	enable_irq_wake(GTA02_IRQ_WLAN_GPIO1);
-
-	pm_power_off = gta02_poweroff;
-
-	/* Register the HDQ and vibrator as children of pwm device */
-#ifdef CONFIG_HDQ_GPIO_BITBANG
-	gta02_hdq_device.dev.parent = &s3c24xx_pwm_device.dev;
-	platform_device_register(&gta02_hdq_device);
-#endif
-#ifdef CONFIG_LEDS_GTA02_VIBRATOR
-	gta02_vibrator_dev.dev.parent = &s3c24xx_pwm_device.dev; 
-	platform_device_register(&gta02_vibrator_dev);
-#endif
-}
-
-void DEBUG_LED(int n)
-{
-	switch (n) {
-	case 0:
-		s3c2410_gpio_setpin(GTA02_GPIO_PWR_LED1, 1);
-		break;
-	case 1:
-		s3c2410_gpio_setpin(GTA02_GPIO_PWR_LED2, 1);
-		break;
-	default:
-		s3c2410_gpio_setpin(GTA02_GPIO_AUX_LED, 1);
-		break;
-	}
-}
-EXPORT_SYMBOL_GPL(DEBUG_LED);
-
-MACHINE_START(NEO1973_GTA02, "GTA02")
-	.phys_io	= S3C2410_PA_UART,
-	.io_pg_offst	= (((u32)S3C24XX_VA_UART) >> 18) & 0xfffc,
-	.boot_params	= S3C2410_SDRAM_PA + 0x100,
-	.map_io		= gta02_map_io,
-	.init_irq	= s3c24xx_init_irq,
-	.init_machine	= gta02_machine_init,
-	.timer		= &s3c24xx_timer,
-MACHINE_END