diff options
author | Florian Fainelli <florian@openwrt.org> | 2012-11-30 10:53:47 +0000 |
---|---|---|
committer | Florian Fainelli <florian@openwrt.org> | 2012-11-30 10:53:47 +0000 |
commit | 521bb44ca00c63c0dc765ad5aaa2b6b56075db71 (patch) | |
tree | 6967781d60eafa96b0aaa18407425f79ae663398 /target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c | |
parent | 3370969c2987bb94f395accf963e5f10f4d23393 (diff) | |
download | master-187ad058-521bb44ca00c63c0dc765ad5aaa2b6b56075db71.tar.gz master-187ad058-521bb44ca00c63c0dc765ad5aaa2b6b56075db71.tar.bz2 master-187ad058-521bb44ca00c63c0dc765ad5aaa2b6b56075db71.zip |
[ubicom32] remove target
This target is unused, does not support any off the shelf hardware and
has been a maintenance burden for quite some time now.
Signed-off-by: Florian Fainelli <florian@openwrt.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@34430 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c')
-rw-r--r-- | target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c | 1066 |
1 files changed, 0 insertions, 1066 deletions
diff --git a/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c b/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c deleted file mode 100644 index 405491cc40..0000000000 --- a/target/linux/ubicom32/files/drivers/mtd/devices/ubi32-m25p80.c +++ /dev/null @@ -1,1066 +0,0 @@ -/* - * drivers/mtd/devices/ubi32-m25p80.c - * NOR flash driver, Ubicom processor internal SPI flash interface. - * - * This code instantiates the serial flash that contains the - * original bootcode. The serial flash start at address 0x60000000 - * in both Ubicom32V3 and Ubicom32V4 ISAs. - * - * This piece of flash is made to appear as a Memory Technology - * Device (MTD) with this driver to allow Read/Write/Erase operations. - * - * (C) Copyright 2009, Ubicom, Inc. - * - * This file is part of the Ubicom32 Linux Kernel Port. - * - * The Ubicom32 Linux Kernel Port is free software: you can redistribute - * it and/or modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation, either version 2 of the - * License, or (at your option) any later version. - * - * The Ubicom32 Linux Kernel Port is distributed in the hope that it - * will be useful, but WITHOUT ANY WARRANTY; without even the implied - * warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See - * the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with the Ubicom32 Linux Kernel Port. If not, - * see <http://www.gnu.org/licenses/>. - * - * Ubicom32 implementation derived from (with many thanks): - * arch/m68knommu - * arch/blackfin - * arch/parisc - */ -#include <linux/types.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/spi/spi.h> -#include <linux/spi/flash.h> - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/mutex.h> - -#include <asm/ip5000.h> -#include <asm/devtree.h> - -#define UBICOM32_FLASH_BASE 0x60000000 -#define UBICOM32_FLASH_MAX_SIZE 0x01000000 -#define UBICOM32_FLASH_START 0x00000000 -#define UBICOM32_KERNEL_OFFSET 0x00010000 /* The kernel starts after Ubicom - * .protect section. */ - -static struct mtd_partition ubicom32_flash_partitions[] = { - { - .name = "Bootloader", /* Protected Section - * Partition */ - .size = 0x10000, - .offset = UBICOM32_FLASH_START, -// .mask_flags = MTD_WRITEABLE /* Mark Read-only */ - }, - { - .name = "Kernel", /* Kernel Partition. */ - .size = 0, /* this will be set up during - * probe stage. At that time we - * will know end of linux image - * in flash. */ - .offset = MTDPART_OFS_APPEND, /* Starts right after Protected - * section. */ -// .mask_flags = MTD_WRITEABLE /* Mark Read-only */ - }, - { - .name = "Rest", /* Rest of the flash. */ - .size = 0x200000, /* Use up what remains in the - * flash. */ - .offset = MTDPART_OFS_NXTBLK, /* Starts right after Protected - * section. */ - } -}; - -static struct flash_platform_data ubicom32_flash_data = { - .name = "ubicom32_boot_flash", - .parts = ubicom32_flash_partitions, - .nr_parts = ARRAY_SIZE(ubicom32_flash_partitions), -}; - -static struct resource ubicom32_flash_resource[] = { - { - .start = UBICOM32_FLASH_BASE, - .end = UBICOM32_FLASH_BASE + - UBICOM32_FLASH_MAX_SIZE - 1, - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device ubicom32_flash_device = { - .name = "ubicom32flashdriver", - .id = 0, /* Bus number */ - .num_resources = ARRAY_SIZE(ubicom32_flash_resource), - .resource = ubicom32_flash_resource, - .dev = { - .platform_data = &ubicom32_flash_data, - }, -}; - -static struct platform_device *ubicom32_flash_devices[] = { - &ubicom32_flash_device, -}; - -static int __init ubicom32_flash_init(void) -{ - printk(KERN_INFO "%s(): registering device resources\n", - __FUNCTION__); - platform_add_devices(ubicom32_flash_devices, - ARRAY_SIZE(ubicom32_flash_devices)); - return 0; -} - -arch_initcall(ubicom32_flash_init); - -/* - * MTD SPI driver for ST M25Pxx (and similar) serial flash chips through - * Ubicom32 SPI controller. - * - * Author: Mike Lavender, mike@steroidmicros.com - * - * Copyright (c) 2005, Intec Automation Inc. - * - * Some parts are based on lart.c by Abraham Van Der Merwe - * - * Cleaned up and generalized based on mtd_dataflash.c - * - * This code is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - */ - -#define FLASH_PAGESIZE 256 - -/* Flash opcodes. */ -#define OPCODE_WREN 0x06 /* Write enable */ -#define OPCODE_RDSR 0x05 /* Read status register */ -#define OPCODE_READ 0x03 /* Read data bytes (low frequency) */ -#define OPCODE_FAST_READ 0x0b /* Read data bytes (high frequency) */ -#define OPCODE_PP 0x02 /* Page program (up to 256 bytes) */ -#define OPCODE_BE_4K 0x20 /* Erase 4KiB block */ -#define OPCODE_BE_32K 0x52 /* Erase 32KiB block */ -#define OPCODE_SE 0xd8 /* Sector erase (usually 64KiB) */ -#define OPCODE_RDID 0x9f /* Read JEDEC ID */ - -/* Status Register bits. */ -#define SR_WIP 1 /* Write in progress */ -#define SR_WEL 2 /* Write enable latch */ -/* meaning of other SR_* bits may differ between vendors */ -#define SR_BP0 4 /* Block protect 0 */ -#define SR_BP1 8 /* Block protect 1 */ -#define SR_BP2 0x10 /* Block protect 2 */ -#define SR_SRWD 0x80 /* SR write protect */ - -/* Define max times to check status register before we give up. */ -#define MAX_READY_WAIT_COUNT 100000 - - -#ifdef CONFIG_MTD_PARTITIONS -#define mtd_has_partitions() (1) -#else -#define mtd_has_partitions() (0) -#endif - -/* - * Ubicom32 FLASH Command Set - */ -#define FLASH_FC_INST_CMD 0x00 /* for SPI command only transaction */ -#define FLASH_FC_INST_WR 0x01 /* for SPI write transaction */ -#define FLASH_FC_INST_RD 0x02 /* for SPI read transaction */ - -#define ALIGN_DOWN(v, a) ((v) & ~((a) - 1)) -#define ALIGN_UP(v, a) (((v) + ((a) - 1)) & ~((a) - 1)) - -#define FLASH_COMMAND_KICK_OFF(io) \ - asm volatile( \ - " bset "D(IO_INT_CLR)"(%0), #0, #%%bit("D(IO_XFL_INT_DONE)") \n\t" \ - " jmpt.t .+4 \n\t" \ - " bset "D(IO_INT_SET)"(%0), #0, #%%bit("D(IO_XFL_INT_START)") \n\t" \ - : \ - : "a" (io) \ - : "memory", "cc" \ - ); - -#define FLASH_COMMAND_WAIT_FOR_COMPLETION(io) \ - asm volatile( \ - " btst "D(IO_INT_STATUS)"(%0), #%%bit("D(IO_XFL_INT_DONE)") \n\t" \ - " jmpeq.f .-4 \n\t" \ - : \ - : "a" (io) \ - : "memory", "cc" \ - ); - -#define FLASH_COMMAND_EXEC(io) \ - FLASH_COMMAND_KICK_OFF(io) \ - FLASH_COMMAND_WAIT_FOR_COMPLETION(io) - - -#define OSC1_FREQ 12000000 -#define TEN_MICRO_SECONDS (OSC1_FREQ * 10 / 1000000) - -/* - * We will have to eventually replace this null definition with the real thing. - */ -#define WATCHDOG_RESET() - -#define EXTFLASH_WRITE_FIFO_SIZE 32 -#define EXTFLASH_WRITE_BLOCK_SIZE EXTFLASH_WRITE_FIFO_SIZE /* limit the size to - * FIFO capacity, so - * the thread can be - * suspended. */ - -#define JFFS2_FILESYSTEM_SIZE 0x100000 - -/****************************************************************************/ - -struct m25p { - struct platform_device *plt_dev; - struct mutex lock; - struct mtd_info mtd; - unsigned partitioned:1; - u8 erase_opcode; - u8 command[4]; -}; - -static inline struct m25p *mtd_to_m25p(struct mtd_info *mtd) -{ - return container_of(mtd, struct m25p, mtd); -} - -/****************************************************************************/ - -/* - * Internal helper functions - */ - -/* - * Read the status register, returning its value in the location - * Return the status register value. - * Returns negative if error occurred. - */ -static int read_sr(struct m25p *flash) -{ - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | - IO_XFL_CTL1_FC_DATA(1); - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR); - FLASH_COMMAND_EXEC(io); - - return io->status1 & 0xff; -} - -/* - * mem_flash_io_read_u32() - */ -static u32 mem_flash_io_read_u32(u32 addr) -{ - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | - IO_XFL_CTL1_FC_DATA(4) | IO_XFL_CTL1_FC_DUMMY(1) | - IO_XFL_CTL1_FC_ADDR; - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_FAST_READ) | - IO_XFL_CTL2_FC_ADDR(addr); - FLASH_COMMAND_EXEC(io); - return io->status1; -} - -/* - * mem_flash_read_u8() - */ -static u8 mem_flash_read_u8(u32 addr) -{ - u32 tmp_addr = ALIGN_DOWN(addr, 4); - u32 tmp_data = mem_flash_io_read_u32(tmp_addr); - u8 *ptr = (u8 *)&tmp_data; - return ptr[addr & 0x3]; -} - -/* - * mem_flash_read() - * No need to lock as read is implemented with ireads (same as normal flash - * execution). - */ -static void mem_flash_read(u32 addr, void *dst, size_t length) -{ - /* - * Range check - */ - /* - * Fix source alignment. - */ - while (addr & 0x03) { - if (length == 0) { - return; - } - *((u8 *)dst) = mem_flash_read_u8(addr++); - dst++; - length--; - } - - while (length >= 4) { - u32 tmp_data = mem_flash_io_read_u32(addr); - addr += 4; - length -= 4; - - /* - * Send the data to the destination. - */ - memcpy((void *)dst, (void *)&tmp_data, 4); - dst += 4; - } - - while (length--) { - *((u8 *)dst) = mem_flash_read_u8(addr++); - dst++; - } -} - -/* - * mem_flash_wait_until_complete() - */ -static void mem_flash_wait_until_complete(void) -{ - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - - do { - /* - * Put a delay here to deal with flash programming problem. - */ - u32 mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS; - while (UBICOM32_IO_TIMER->mptval < mptval) - ; - - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | - IO_XFL_CTL1_FC_DATA(1); - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDSR); - FLASH_COMMAND_EXEC(io); - } while (io->status1 & SR_WIP); -} - -/* - * mem_flash_write_next() - */ -static size_t mem_flash_write_next(u32 addr, u8 *buf, size_t length) -{ - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - u32 data_start = addr; - u32 data_end = addr + length; - size_t count; - u32 i, j; - - /* - * Top limit address. - */ - u32 block_start = ALIGN_DOWN(data_start, 4); - u32 block_end = block_start + EXTFLASH_WRITE_BLOCK_SIZE; - - union { - u8 byte[EXTFLASH_WRITE_BLOCK_SIZE]; - u32 word[EXTFLASH_WRITE_BLOCK_SIZE / 4]; - } write_buf; - - u32 *flash_addr = (u32 *)block_start; - - /* - * The write block must be limited by FLASH internal buffer. - */ - u32 block_end_align = ALIGN_DOWN(block_end, 256); - bool write_needed; - - block_end = (block_end_align > block_start) - ? block_end_align : block_end; - data_end = (data_end <= block_end) ? data_end : block_end; - block_end = ALIGN_UP(data_end, 4); - count = data_end - data_start; - - /* - * Transfer data to a buffer. - */ - for (i = 0; i < (block_end - block_start) / 4; i++) { - /* - * The FLASH read can hold D-cache for a long time. - * Use I/O operation to read FLASH to avoid starving other - * threads, especially HRT. (Do this for application only) - */ - write_buf.word[i] = mem_flash_io_read_u32( - (u32)(&flash_addr[i])); - } - - write_needed = false; - for (i = 0, j = (data_start - block_start); - i < (data_end - data_start); i++, j++) { - write_needed = write_needed || (write_buf.byte[j] != buf[i]); - write_buf.byte[j] &= buf[i]; - } - - - /* - * If the data in FLASH is identical to what to be written. Then skip - * it. - */ - if (write_needed) { - /* - * Write to flash. - */ - void *tmp __attribute__((unused)); - s32 extra_words; - - asm volatile( - " move.4 %0, %2 \n\t" - " bset "D(IO_INT_SET)"(%1), #0, #%%bit("D(IO_PORTX_INT_FIFO_TX_RESET)") \n\t" - " pipe_flush 0 \n\t" - " .rept "D(EXTFLASH_WRITE_FIFO_SIZE / 4)" \n\t" - " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t" - " .endr \n\t" - : "=&a" (tmp) - : "a" (io), "r" (&write_buf.word[0]) - : "memory", "cc" - ); - - /* Lock FLASH for write access. */ - io->ctl0 |= IO_XFL_CTL0_MCB_LOCK; - - /* Command: WREN */ - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD); - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN); - FLASH_COMMAND_EXEC(io); - - /* Command: BYTE PROGRAM */ - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_WR) | - IO_XFL_CTL1_FC_DATA(block_end - block_start) | - IO_XFL_CTL1_FC_ADDR; - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_PP) | - IO_XFL_CTL2_FC_ADDR(block_start); - FLASH_COMMAND_KICK_OFF(io); - - extra_words = (s32)(block_end - block_start - - EXTFLASH_WRITE_FIFO_SIZE) / 4; - if (extra_words > 0) { - asm volatile( - " move.4 %0, %3 \n\t" - "1: cmpi "D(IO_FIFO_LEVEL)"(%1), #4 \n\t" - " jmpgt.s.t 1b \n\t" - " move.4 "D(IO_TX_FIFO)"(%1), (%0)4++ \n\t" - " add.4 %2, #-1, %2 \n\t" - " jmpgt.t 1b \n\t" - : "=&a" (tmp) - : "a" (io), "d" (extra_words), - "r" (&write_buf.word[EXTFLASH_WRITE_FIFO_SIZE / 4]) - : "memory", "cc" - ); - } - FLASH_COMMAND_WAIT_FOR_COMPLETION(io); - - mem_flash_wait_until_complete(); - - - /* Unlock FLASH for cache access. */ - io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK; - } - - /* - * Complete. - */ - return count; -} - -/* - * mem_flash_write() - */ -static void mem_flash_write(u32 addr, const void *src, size_t length) -{ - /* - * Write data - */ - u8_t *ptr = (u8_t *)src; - while (length) { - size_t count = mem_flash_write_next(addr, ptr, length); - addr += count; - ptr += count; - length -= count; - } -} - -/* - * Service routine to read status register until ready, or timeout occurs. - * Returns non-zero if error. - */ -static int wait_till_ready(struct m25p *flash) -{ - int count; - int sr; - - /* one chip guarantees max 5 msec wait here after page writes, - * but potentially three seconds (!) after page erase. - */ - for (count = 0; count < MAX_READY_WAIT_COUNT; count++) { - u32 mptval; - sr = read_sr(flash); - if (sr < 0) - break; - else if (!(sr & SR_WIP)) - return 0; - - /* - * Put a 10us delay here to deal with flash programming problem. - */ - mptval = UBICOM32_IO_TIMER->mptval + TEN_MICRO_SECONDS; - while ((s32)(mptval - UBICOM32_IO_TIMER->mptval) > 0) { - WATCHDOG_RESET(); - } - /* REVISIT sometimes sleeping would be best */ - } - - return 1; -} - -/* - * mem_flash_erase_page() - */ -static void mem_flash_erase_page(u32 addr) -{ - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - - /* Lock FLASH for write access. */ - io->ctl0 |= IO_XFL_CTL0_MCB_LOCK; - - /* Command: WREN */ - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD); - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_WREN); - FLASH_COMMAND_EXEC(io); - - /* Command: ERASE */ - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_CMD) | - IO_XFL_CTL1_FC_ADDR; - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_SE) | - IO_XFL_CTL2_FC_ADDR(addr); - FLASH_COMMAND_EXEC(io); - - mem_flash_wait_until_complete(); - - /* Unlock FLASH for cache access. */ - io->ctl0 &= ~IO_XFL_CTL0_MCB_LOCK; -} - -/* - * mem_flash_erase() - */ -static u32 mem_flash_erase(u32 addr, u32 length) -{ - /* - * Calculate the endaddress to be the first address of the page - * just beyond this erase section of pages. - */ - u32 endaddr = addr + length; - - /* - * Erase. - */ - while (addr < endaddr) { - u32 test_addr = addr; - mem_flash_erase_page(addr); - - /* - * Test how much was erased as actual flash page at this address - * may be smaller than the expected page size. - */ - while (test_addr < endaddr) { - /* - * The FLASH read can hold D-cache for a long time. Use - * I/O operation to read FLASH to avoid starving other - * threads, especially HRT. (Do this for application - * only) - */ - if (mem_flash_io_read_u32(test_addr) != 0xFFFFFFFF) { - break; - } - test_addr += 4; - } - if (test_addr == addr) { - printk("erase failed at address 0x%x, skipping", - test_addr); - test_addr += 4; - return 1; - } - addr = test_addr; - } - return 0; -} - - -/****************************************************************************/ - -/* - * MTD implementation - */ - -/* - * Erase an address range on the flash chip. The address range may extend - * one or more erase sectors. Return an error is there is a problem erasing. - */ -static int ubicom32_flash_driver_erase(struct mtd_info *mtd, - struct erase_info *instr) -{ - struct m25p *flash = mtd_to_m25p(mtd); - u32 addr, len; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %lld\n", - dev_name(&flash->plt_dev->dev), __FUNCTION__, "at", - (u32)instr->addr, instr->len); - - /* sanity checks */ - if (instr->addr + instr->len > flash->mtd.size) - return -EINVAL; - if ((instr->addr % mtd->erasesize) != 0 - || (instr->len % mtd->erasesize) != 0) { - return -EINVAL; - } - - addr = instr->addr + UBICOM32_FLASH_BASE; - len = instr->len; - - mutex_lock(&flash->lock); - - /* REVISIT in some cases we could speed up erasing large regions - * by using OPCODE_SE instead of OPCODE_BE_4K - */ - - /* now erase those sectors */ - if (mem_flash_erase(addr, len)) { - instr->state = MTD_ERASE_FAILED; - mutex_unlock(&flash->lock); - return -EIO; - } - - mutex_unlock(&flash->lock); - instr->state = MTD_ERASE_DONE; - mtd_erase_callback(instr); - return 0; -} - -/* - * Read an address range from the flash chip. The address range - * may be any size provided it is within the physical boundaries. - */ -static int ubicom32_flash_driver_read(struct mtd_info *mtd, loff_t from, - size_t len, size_t *retlen, u_char *buf) -{ - struct m25p *flash = mtd_to_m25p(mtd); - u32 base_addr = UBICOM32_FLASH_BASE + from; - - DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n", - dev_name(&flash->plt_dev->dev), __FUNCTION__, "from", - (u32)from, len); - - /* sanity checks */ - if (!len) - return 0; - - if (from + len > flash->mtd.size) - return -EINVAL; - - /* Byte count starts at zero. */ - if (retlen) - *retlen = 0; - - mutex_lock(&flash->lock); - - /* Wait till previous write/erase is done. */ - if (wait_till_ready(flash)) { - /* REVISIT status return?? */ - mutex_unlock(&flash->lock); - return 1; - } - - mem_flash_read(base_addr, (void *)buf, len); - - if (retlen) - *retlen = len; - - mutex_unlock(&flash->lock); - - return 0; -} - -/* - * Write an address range to the flash chip. Data must be written in - * FLASH_PAGESIZE chunks. The address range may be any size provided - * it is within the physical boundaries. - */ -static int ubicom32_flash_driver_write(struct mtd_info *mtd, loff_t to, - size_t len, size_t *retlen, - const u_char *buf) -{ - struct m25p *flash = mtd_to_m25p(mtd); - u32 base_addr = UBICOM32_FLASH_BASE + to; - DEBUG(MTD_DEBUG_LEVEL2, "%s: %s %s 0x%08x, len %d\n", - dev_name(&flash->plt_dev->dev), __FUNCTION__, "to", - (u32)to, len); - - if (retlen) - *retlen = 0; - - /* sanity checks */ - if (!len) - return 0; - - if (to + len > flash->mtd.size) - return -EINVAL; - - mutex_lock(&flash->lock); - - mem_flash_write(base_addr, (void *) buf, len); - - /* Wait until finished previous write command. */ - if (wait_till_ready(flash)) { - mutex_unlock(&flash->lock); - return 1; - } - - if (retlen) - *retlen = len; - - mutex_unlock(&flash->lock); - return 0; -} - - -/****************************************************************************/ - -/* - * SPI device driver setup and teardown - */ - -struct flash_info { - char *name; - - /* JEDEC id zero means "no ID" (most older chips); otherwise it has - * a high byte of zero plus three data bytes: the manufacturer id, - * then a two byte device id. - */ - u32 jedec_id; - - /* The size listed here is what works with OPCODE_SE, which isn't - * necessarily called a "sector" by the vendor. - */ - unsigned sector_size; - u16 n_sectors; - - u16 flags; -#define SECT_4K 0x01 /* OPCODE_BE_4K works uniformly */ -}; - - -/* NOTE: double check command sets and memory organization when you add - * more flash chips. This current list focusses on newer chips, which - * have been converging on command sets which including JEDEC ID. - */ -static struct flash_info __devinitdata m25p_data[] = { - - /* Atmel -- some are (confusingly) marketed as "DataFlash" */ - { "at25fs010", 0x1f6601, 32 * 1024, 4, SECT_4K, }, - { "at25fs040", 0x1f6604, 64 * 1024, 8, SECT_4K, }, - - { "at25df041a", 0x1f4401, 64 * 1024, 8, SECT_4K, }, - - { "at26f004", 0x1f0400, 64 * 1024, 8, SECT_4K, }, - { "at26df081a", 0x1f4501, 64 * 1024, 16, SECT_4K, }, - { "at26df161a", 0x1f4601, 64 * 1024, 32, SECT_4K, }, - { "at26df321", 0x1f4701, 64 * 1024, 64, SECT_4K, }, - - /* Spansion -- single (large) sector size only, at least - * for the chips listed here (without boot sectors). - */ - { "s25sl004a", 0x010212, 64 * 1024, 8, }, - { "s25sl008a", 0x010213, 64 * 1024, 16, }, - { "s25sl016a", 0x010214, 64 * 1024, 32, }, - { "s25sl032a", 0x010215, 64 * 1024, 64, }, - { "s25sl064a", 0x010216, 64 * 1024, 128, }, - - /* SST -- large erase sizes are "overlays", "sectors" are 4K */ - { "sst25vf040b", 0xbf258d, 64 * 1024, 8, SECT_4K, }, - { "sst25vf080b", 0xbf258e, 64 * 1024, 16, SECT_4K, }, - { "sst25vf016b", 0xbf2541, 64 * 1024, 32, SECT_4K, }, - { "sst25vf032b", 0xbf254a, 64 * 1024, 64, SECT_4K, }, - - /* ST Microelectronics -- newer production may have feature updates */ - { "m25p05", 0x202010, 32 * 1024, 2, }, - { "m25p10", 0x202011, 32 * 1024, 4, }, - { "m25p20", 0x202012, 64 * 1024, 4, }, - { "m25p40", 0x202013, 64 * 1024, 8, }, - { "m25p80", 0, 64 * 1024, 16, }, - { "m25p16", 0x202015, 64 * 1024, 32, }, - { "m25p32", 0x202016, 64 * 1024, 64, }, - { "m25p64", 0x202017, 64 * 1024, 128, }, - { "m25p128", 0x202018, 256 * 1024, 64, }, - - { "m45pe80", 0x204014, 64 * 1024, 16, }, - { "m45pe16", 0x204015, 64 * 1024, 32, }, - - { "m25pe80", 0x208014, 64 * 1024, 16, }, - { "m25pe16", 0x208015, 64 * 1024, 32, SECT_4K, }, - - /* Winbond -- w25x "blocks" are 64K, "sectors" are 4KiB */ - { "w25x10", 0xef3011, 64 * 1024, 2, SECT_4K, }, - { "w25x20", 0xef3012, 64 * 1024, 4, SECT_4K, }, - { "w25x40", 0xef3013, 64 * 1024, 8, SECT_4K, }, - { "w25x80", 0xef3014, 64 * 1024, 16, SECT_4K, }, - { "w25x16", 0xef3015, 64 * 1024, 32, SECT_4K, }, - { "w25x32", 0xef3016, 64 * 1024, 64, SECT_4K, }, - { "w25x64", 0xef3017, 64 * 1024, 128, SECT_4K, }, - - /* Macronix -- mx25lxxx */ - { "mx25l32", 0xc22016, 64 * 1024, 64, }, - { "mx25l64", 0xc22017, 64 * 1024, 128, }, - { "mx25l128", 0xc22018, 64 * 1024, 256, }, - -}; - -struct flash_info *__devinit jedec_probe(struct platform_device *spi) -{ - int tmp; - u32 jedec; - struct flash_info *info; - struct ubicom32_io_port *io = (struct ubicom32_io_port *)RA; - - /* - * Setup and run RDID command on the flash. - */ - io->ctl1 &= ~IO_XFL_CTL1_MASK; - io->ctl1 |= IO_XFL_CTL1_FC_INST(FLASH_FC_INST_RD) | - IO_XFL_CTL1_FC_DATA(3); - io->ctl2 = IO_XFL_CTL2_FC_CMD(OPCODE_RDID); - FLASH_COMMAND_EXEC(io); - - jedec = io->status1 & 0x00ffffff; - - for (tmp = 0, info = m25p_data; - tmp < ARRAY_SIZE(m25p_data); - tmp++, info++) { - if (info->jedec_id == jedec) - return info; - } - dev_err(&spi->dev, "unrecognized JEDEC id %06x\n", jedec); - return NULL; -} - - -/* - * board specific setup should have ensured the SPI clock used here - * matches what the READ command supports, at least until this driver - * understands FAST_READ (for clocks over 25 MHz). - */ -static int __devinit ubicom32_flash_probe(struct platform_device *spi) -{ - struct flash_platform_data *data; - struct m25p *flash; - struct flash_info *info; - unsigned i; - - /* Platform data helps sort out which chip type we have, as - * well as how this board partitions it. If we don't have - * a chip ID, try the JEDEC id commands; they'll work for most - * newer chips, even if we don't recognize the particular chip. - */ - data = spi->dev.platform_data; - if (data && data->type) { - for (i = 0, info = m25p_data; - i < ARRAY_SIZE(m25p_data); - i++, info++) { - if (strcmp(data->type, info->name) == 0) - break; - } - - /* unrecognized chip? */ - if (i == ARRAY_SIZE(m25p_data)) { - DEBUG(MTD_DEBUG_LEVEL0, "%s: unrecognized id %s\n", - dev_name(&spi->dev), data->type); - info = NULL; - - /* recognized; is that chip really what's there? */ - } else if (info->jedec_id) { - struct flash_info *chip = jedec_probe(spi); - - if (!chip || chip != info) { - dev_warn(&spi->dev, "found %s, expected %s\n", - chip ? chip->name : "UNKNOWN", - info->name); - info = NULL; - } - } - } else - info = jedec_probe(spi); - - if (!info) - return -ENODEV; - - flash = kzalloc(sizeof *flash, GFP_KERNEL); - if (!flash) - return -ENOMEM; - - flash->plt_dev = spi; - mutex_init(&flash->lock); - dev_set_drvdata(&spi->dev, flash); - - if (data && data->name) - flash->mtd.name = data->name; - else - flash->mtd.name = dev_name(&spi->dev); - - flash->mtd.type = MTD_NORFLASH; - flash->mtd.writesize = 1; - flash->mtd.flags = MTD_CAP_NORFLASH; - flash->mtd.size = info->sector_size * info->n_sectors; - flash->mtd.erase = ubicom32_flash_driver_erase; - flash->mtd.read = ubicom32_flash_driver_read; - flash->mtd.write = ubicom32_flash_driver_write; - - /* prefer "small sector" erase if possible */ - /* - * The Ubicom erase code does not use the opcode for smaller sectors, - * so disable that functionality and keep erasesize == sector_size - * so that the test in ubicom32_flash_driver_erase works properly. - * - * This was: `if (info->flags & SECT_4K) {' instead of `if (0) {' - */ - if (0) { - flash->erase_opcode = OPCODE_BE_4K; - flash->mtd.erasesize = 4096; - } else { - flash->erase_opcode = OPCODE_SE; - flash->mtd.erasesize = info->sector_size; - } - - dev_info(&spi->dev, "%s (%lld Kbytes)\n", info->name, - flash->mtd.size / 1024); - - DEBUG(MTD_DEBUG_LEVEL2, - "mtd .name = %s, .size = 0x%.8llx (%lluMiB) " - ".erasesize = 0x%.8x (%uKiB) .numeraseregions = %d\n", - flash->mtd.name, - flash->mtd.size, flash->mtd.size / (1024*1024), - flash->mtd.erasesize, flash->mtd.erasesize / 1024, - flash->mtd.numeraseregions); - - if (flash->mtd.numeraseregions) - for (i = 0; i < flash->mtd.numeraseregions; i++) - DEBUG(MTD_DEBUG_LEVEL2, - "mtd.eraseregions[%d] = { .offset = 0x%.8llx, " - ".erasesize = 0x%.8x (%uKiB), " - ".numblocks = %d }\n", - i, flash->mtd.eraseregions[i].offset, - flash->mtd.eraseregions[i].erasesize, - flash->mtd.eraseregions[i].erasesize / 1024, - flash->mtd.eraseregions[i].numblocks); - - - /* partitions should match sector boundaries; and it may be good to - * use readonly partitions for writeprotected sectors (BP2..BP0). - */ - if (mtd_has_partitions()) { - struct mtd_partition *parts = NULL; - int nr_parts = 0; - -#ifdef CONFIG_MTD_CMDLINE_PARTS - static const char *part_probes[] = { "cmdlinepart", NULL, }; - - nr_parts = parse_mtd_partitions(&flash->mtd, - part_probes, &parts, 0); -#endif - - if (nr_parts <= 0 && data && data->parts) { - parts = data->parts; - nr_parts = data->nr_parts; - if (nr_parts >= 2) { - /* - * Set last partition size to be 1M. - */ - parts[1].size = flash->mtd.size - - parts[0].size - JFFS2_FILESYSTEM_SIZE; - parts[2].size = JFFS2_FILESYSTEM_SIZE; - } - } - - if (nr_parts > 0) { - for (i = 0; i < nr_parts; i++) { - DEBUG(MTD_DEBUG_LEVEL2, "partitions[%d] = " - "{.name = %s, .offset = 0x%.8llx, " - ".size = 0x%.8llx (%lluKiB) }\n", - i, parts[i].name, - parts[i].offset, - parts[i].size, - parts[i].size / 1024); - } - flash->partitioned = 1; - return add_mtd_partitions(&flash->mtd, parts, nr_parts); - } - } else if (data->nr_parts) - dev_warn(&spi->dev, "ignoring %d default partitions on %s\n", - data->nr_parts, data->name); - - return add_mtd_device(&flash->mtd) == 1 ? -ENODEV : 0; -} - - -static int __devexit ubicom32_flash_remove(struct spi_device *spi) -{ - struct m25p *flash = dev_get_drvdata(&spi->dev); - int status; - - /* Clean up MTD stuff. */ - if (mtd_has_partitions() && flash->partitioned) - status = del_mtd_partitions(&flash->mtd); - else - status = del_mtd_device(&flash->mtd); - if (status == 0) - kfree(flash); - return 0; -} - -static struct platform_driver ubicom32_flash_driver = { - .driver = { - .name = "ubicom32flashdriver", - .bus = &platform_bus_type, - .owner = THIS_MODULE, - }, - .probe = ubicom32_flash_probe, - .remove = NULL, -}; - -static int ubicom32_flash_driver_init(void) -{ - return platform_driver_register(&ubicom32_flash_driver); -} - - -static void ubicom32_flash_driver_exit(void) -{ - platform_driver_unregister(&ubicom32_flash_driver); -} - - -module_init(ubicom32_flash_driver_init); -module_exit(ubicom32_flash_driver_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Mike Lavender"); -MODULE_DESCRIPTION("Ubicom32 MTD SPI driver for ST M25Pxx flash chips"); |