aboutsummaryrefslogtreecommitdiffstats
path: root/target
diff options
context:
space:
mode:
authorJohn Crispin <blogic@openwrt.org>2015-09-14 20:08:39 +0000
committerJohn Crispin <blogic@openwrt.org>2015-09-14 20:08:39 +0000
commita93e373506672af2b6b76e723c77cc19449c35c9 (patch)
tree1c21dfe99ff9172b25e3e049c6274552475795b3 /target
parent87c501f518fe81026c029fc999d1bc37f893ac6e (diff)
downloadmaster-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.tar.gz
master-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.tar.bz2
master-187ad058-a93e373506672af2b6b76e723c77cc19449c35c9.zip
lantiq: get more status information from xDSL
Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com> Signed-off-by: Helge Mader <hmader@tdt.de> Tested-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com> Tested-by: Andre Heider <a.heider@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46917 3c298f89-4303-0410-b956-a3cf2f4a3e73
Diffstat (limited to 'target')
-rwxr-xr-x[-rw-r--r--]target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh412
1 files changed, 400 insertions, 12 deletions
diff --git a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
index 56b8652588..7809d01dd8 100644..100755
--- a/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
+++ b/target/linux/lantiq/base-files/lib/functions/lantiq_dsl.sh
@@ -19,6 +19,9 @@ dsl_cmd() {
dsl_val() {
echo $(expr "$1" : '.*'$2'=\([-\.[:alnum:]]*\).*')
}
+dsl_string() {
+ echo $(expr "$1" : '.*'$2'=(\([A-Z0-9,]*\))')
+}
#
# Simple divide by 10 routine to cope with one decimal place
@@ -49,6 +52,16 @@ scale() {
fi
}
+scale_latency() {
+ local val=$1
+ local a
+ local b
+
+ a=$(expr $val / 100)
+ b=$(expr $val % 100)
+ printf "%d.%d ms" ${a} ${b}
+}
+
#
# Read the data rates for both directions
#
@@ -77,7 +90,7 @@ data_rates() {
echo "dsl.data_rate_down_s=\"$sdrd\""
echo "dsl.data_rate_up_s=\"$sdru\""
else
- echo "Data Rate: ${sdrd}/s / ${sdru}/s"
+ echo "Data Rate: Down: ${sdrd}/s / Up: ${sdru}/s"
fi
}
@@ -92,11 +105,340 @@ chipset() {
vig=$(dsl_cmd vig)
cs=$(dsl_val "$vig" DSL_ChipSetType)
csv=$(dsl_val "$vig" DSL_ChipSetHWVersion)
+ csfw=$(dsl_val "$vig" DSL_ChipSetFWVersion)
+ csapi=$(dsl_val "$vig" DSL_DriverVersionApi)
if [ "$action" = "lucistat" ]; then
echo "dsl.chipset=\"${cs} ${csv}\""
+ echo "dsl.firmware_version=\"${csfw}\""
+ echo "dsl.api_version=\"${csapi}\""
else
- echo "Chipset: ${cs} ${csv}"
+ echo "Chipset: ${cs} ${csv}"
+ echo "Firmware Version: ${csfw}"
+ echo "API Version: ${csapi}"
+ fi
+}
+
+#
+# Vendor information
+#
+vendor() {
+ local lig
+ local vid
+ local svid
+
+ lig=$(dsl_cmd g997lig 1)
+ vid=$(dsl_string "$lig" G994VendorID)
+ svid=$(dsl_string "$lig" SystemVendorID)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.atuc_vendor_id=\"${vid}\""
+ echo "dsl.atuc_system_vendor_id=\"${svid}\""
+ else
+ echo "ATU-C Vendor ID: ${vid}"
+ echo "ATU-C System Vendor ID: ${svid}"
+ fi
+}
+
+#
+# XTSE capabilities
+#
+xtse() {
+ local xtusesg
+ local xtse1
+ local xtse2
+ local xtse3
+ local xtse4
+ local xtse5
+ local xtse6
+ local xtse7
+ local xtse8
+
+ local xtse_s=""
+
+ local annex_s=""
+ local line_mode_s=""
+ local cmd=""
+
+ xtusesg=$(dsl_cmd g997xtusesg)
+ xtse1=$(dsl_val "$xtusesg" XTSE1)
+ xtse2=$(dsl_val "$xtusesg" XTSE2)
+ xtse3=$(dsl_val "$xtusesg" XTSE3)
+ xtse4=$(dsl_val "$xtusesg" XTSE4)
+ xtse5=$(dsl_val "$xtusesg" XTSE5)
+ xtse6=$(dsl_val "$xtusesg" XTSE6)
+ xtse7=$(dsl_val "$xtusesg" XTSE7)
+ xtse8=$(dsl_val "$xtusesg" XTSE8)
+
+ # Evaluate Annex (according to G.997.1, 7.3.1.1.1)
+ if [ $((xtse1 & 13)) != 0 \
+ -o $((xtse2 & 1)) != 0 \
+ -o $((xtse3 & 12)) != 0 \
+ -o $((xtse4 & 3)) != 0 \
+ -o $((xtse6 & 3)) != 0 \
+ -o $((xtse8 & 1)) != 0 ]; then
+ annex_s=" A,"
+ fi
+
+ if [ $((xtse1 & 48)) != 0 \
+ -o $((xtse2 & 2)) != 0 \
+ -o $((xtse3 & 48)) != 0 \
+ -o $((xtse6 & 12)) != 0 \
+ -o $((xtse8 & 2)) != 0 ]; then
+ annex_s="$annex_s B,"
+ fi
+
+ if [ $((xtse1 & 194)) != 0 \
+ -o $((xtse2 & 12)) != 0 \
+ -o $((xtse8 & 4)) != 0 ]; then
+ annex_s="$annex_s C,"
+ fi
+
+ if [ $((xtse4 & 48)) != 0 \
+ -o $((xtse5 & 3)) != 0 \
+ -o $((xtse6 & 192)) != 0 ]; then
+ annex_s="$annex_s I,"
+ fi
+
+ if [ $((xtse4 & 192)) != 0 \
+ -o $((xtse7 & 3)) != 0 ]; then
+ annex_s="$annex_s J,"
+ fi
+
+ if [ $((xtse5 & 60)) != 0 ]; then
+ annex_s="$annex_s L,"
+ fi
+
+ if [ $((xtse5 & 192)) != 0 \
+ -o $((xtse7 & 12)) != 0 ]; then
+ annex_s="$annex_s M,"
+ fi
+
+ annex_s=`echo ${annex_s:1}`
+ annex_s=`echo ${annex_s%?}`
+
+ # Evaluate Line Mode (according to G.997.1, 7.3.1.1.1)
+
+ # Regional standard: ANSI T1.413
+ if [ $((xtse1 & 1)) != 0 ]; then
+ line_mode_s=" T1.413,"
+ fi
+
+ # Regional standard: TS 101 388
+ if [ $((xtse1 & 1)) != 0 ]; then
+ line_mode_s="$line_mode_s TS 101 388,"
+ fi
+
+ if [ $((xtse1 & 252)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.1 (ADSL),"
+ fi
+
+ if [ $((xtse2 & 15)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.2 (ADSL lite),"
+ fi
+
+ if [ $((xtse3 & 60)) != 0 \
+ -o $((xtse4 & 240)) != 0 \
+ -o $((xtse5 & 252)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.3 (ADSL2),"
+ fi
+
+ if [ $((xtse4 & 3)) != 0 \
+ -o $((xtse5 & 3)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.4 (ADSL2 lite),"
+ fi
+
+ if [ $((xtse6 & 199)) != 0 \
+ -o $((xtse7 & 15)) != 0 ]; then
+ line_mode_s="$line_mode_s G.992.5 (ADSL2+),"
+ fi
+
+ if [ $((xtse8 & 7)) != 0 ]; then
+ line_mode_s="$line_mode_s G.993.2 (VDSL2),"
+ fi
+
+ #!!! PROPRIETARY & INTERMEDIATE USE !!!
+ if [ $((xtse8 & 128)) != 0 ]; then
+ line_mode_s="$line_mode_s G.993.1 (VDSL),"
+ fi
+
+ line_mode_s=`echo ${line_mode_s:1}`
+ line_mode_s=`echo ${line_mode_s%?}`
+
+ xtse_s="${xtse1}, ${xtse2}, ${xtse3}, ${xtse4}, ${xtse5}, ${xtse6}, ${xtse7}, ${xtse8}"
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.xtse1=$xtse1"
+ echo "dsl.xtse2=$xtse2"
+ echo "dsl.xtse3=$xtse3"
+ echo "dsl.xtse4=$xtse4"
+ echo "dsl.xtse5=$xtse5"
+ echo "dsl.xtse6=$xtse6"
+ echo "dsl.xtse7=$xtse7"
+ echo "dsl.xtse8=$xtse8"
+ echo "dsl.xtse_s=\"$xtse_s\""
+ echo "dsl.annex_s=\"${annex_s}\""
+ echo "dsl.line_mode_s=\"${line_mode_s}\""
+ else
+ echo "XTSE Capabilities: ${xtse_s}"
+ echo "Annex: ${annex_s}"
+ echo "Line Mode: ${line_mode_s}"
+ fi
+}
+
+#
+# Power Management Mode
+#
+power_mode() {
+ local pmsg=$(dsl_cmd g997pmsg)
+ local pm=$(dsl_val "$pmsg" nPowerManagementStatus);
+ local s;
+
+ case "$pm" in
+ "-1") s="Power management state is not available" ;;
+ "0") s="L0 - Synchronized" ;;
+ "1") s="L1 - Power Down Data transmission (G.992.2)" ;;
+ "2") s="L2 - Power Down Data transmission (G.992.3 and G.992.4)" ;;
+ "3") s="L3 - No power" ;;
+ *) s="unknown" ;;
+ esac
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.power_mode_num=$pm"
+ echo "dsl.power_mode_s=\"$s\""
+ else
+ echo "Power Management Mode: $s"
+ fi
+}
+
+#
+# Latency type (interleave delay)
+#
+latency_delay() {
+ local csg
+
+ local idu
+ local idu_s;
+ local sidu
+
+ local idd
+ local idd_s;
+ local sidd
+
+ csg=$(dsl_cmd g997csg 0 1)
+ idd=$(dsl_val "$csg" ActualInterleaveDelay)
+
+ csg=$(dsl_cmd g997csg 0 0)
+ idu=$(dsl_val "$csg" ActualInterleaveDelay)
+
+ [ -z "$idd" ] && idd=0
+ [ -z "$idu" ] && idu=0
+
+ if [ "$idd" > 100 ]; then
+ idd_s="Interleave"
+ else
+ idd_s="Fast"
+ fi
+
+ if [ "$idu" > 100 ]; then
+ idu_s="Interleave"
+ else
+ idu_s="Fast"
+ fi
+
+ sidu=$(scale_latency $idu)
+ sidd=$(scale_latency $idd)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.latency_num_down=\"$sidu\""
+ echo "dsl.latency_num_up=\"$sidd\""
+ echo "dsl.latency_s_down=\"$idd_s\""
+ echo "dsl.latency_s_up=\"$idu_s\""
+ else
+ echo "Latency / Interleave Delay: Down: ${idd_s} (${sidd}) / Up: ${idu_s} (${sidu})"
+ fi
+}
+
+#
+# Errors
+#
+errors() {
+ local lsctg
+ local dpctg
+ local ccsg
+ local esf
+ local esn
+ local sesf
+ local sesn
+ local lossf
+ local lossn
+ local uasf
+ local uasn
+
+ local crc_pf
+ local crc_pn
+ local crcp_pf
+ local crcp_pn
+ local hecf
+ local hecn
+
+ local fecn
+ local fecf
+
+ lsctg=$(dsl_cmd pmlsctg 1)
+ esf=$(dsl_val "$lsctg" nES)
+ sesf=$(dsl_val "$lsctg" nSES)
+ lossf=$(dsl_val "$lsctg" nLOSS)
+ uasf=$(dsl_val "$lsctg" nUAS)
+
+ lsctg=$(dsl_cmd pmlsctg 0)
+ esn=$(dsl_val "$lsctg" nES)
+ sesn=$(dsl_val "$lsctg" nSES)
+ lossn=$(dsl_val "$lsctg" nLOSS)
+ uasn=$(dsl_val "$lsctg" nUAS)
+
+ dpctg=$(dsl_cmd pmdpctg 0 1)
+ hecf=$(dsl_val "$dpctg" nHEC)
+ crc_pf=$(dsl_val "$dpctg" nCRC_P)
+ crcp_pf=$(dsl_val "$dpctg" nCRCP_P)
+
+ dpctg=$(dsl_cmd pmdpctg 0 0)
+ hecn=$(dsl_val "$dpctg" nHEC)
+ crc_pn=$(dsl_val "$dpctg" nCRC_P)
+ crcp_pn=$(dsl_val "$dpctg" nCRCP_P)
+
+ ccsg=$(dsl_cmd pmccsg 0 1 0)
+ fecf=$(dsl_val "$ccsg" nFEC)
+
+ ccsg=$(dsl_cmd pmccsg 0 0 0)
+ fecn=$(dsl_val "$ccsg" nFEC)
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.errors_fec_near=$fecn"
+ echo "dsl.errors_fec_far=$fecf"
+ echo "dsl.errors_es_near=$esn"
+ echo "dsl.errors_es_far=$esf"
+ echo "dsl.errors_ses_near=$sesn"
+ echo "dsl.errors_ses_far=$sesf"
+ echo "dsl.errors_loss_near=$lossn"
+ echo "dsl.errors_loss_far=$lossf"
+ echo "dsl.errors_uas_near=$uasn"
+ echo "dsl.errors_uas_far=$uasf"
+ echo "dsl.errors_hec_near=$hecn"
+ echo "dsl.errors_hec_far=$hecf"
+ echo "dsl.errors_crc_p_near=$crc_pn"
+ echo "dsl.errors_crc_p_far=$crc_pf"
+ echo "dsl.errors_crcp_p_near=$crcp_pn"
+ echo "dsl.errors_crcp_p_far=$crcp_pf"
+ else
+ echo "Forward Error Correction Seconds (FECS): Near: ${fecn} / Far: ${fecf}"
+ echo "Errored seconds (ES): Near: ${esn} / Far: ${esf}"
+ echo "Severely Errored Seconds (SES): Near: ${sesn} / Far: ${sesf}"
+ echo "Loss of Signal Seconds (LOSS): Near: ${lossn} / Far: ${lossf}"
+ echo "Unavailable Seconds (UAS): Near: ${uasn} / Far: ${uasf}"
+ echo "Header Error Code Errors (HEC): Near: ${hecn} / Far: ${hecf}"
+ echo "Non Pre-emtive CRC errors (CRC_P): Near: ${crcp_pn} / Far: ${crcp_pf}"
+ echo "Pre-emtive CRC errors (CRCP_P): Near: ${crcp_pn} / Far: ${crcp_pf}"
fi
}
@@ -118,11 +460,6 @@ line_uptime() {
[ -z "$et" ] && et=0
- if [ "$action" = "lucistat" ]; then
- echo "dsl.line_uptime=${et}"
- return
- fi
-
d=$(expr $et / 86400)
etr=$(expr $et % 86400)
h=$(expr $etr / 3600)
@@ -137,7 +474,16 @@ line_uptime() {
[ "${d}" -ne 0 ] && rc="${d}d ${rc}"
[ -z "$rc" ] && rc="down"
- echo "Line Uptime: ${rc}"
+
+
+ if [ "$action" = "lucistat" ]; then
+ echo "dsl.line_uptime=${et}"
+ echo "dsl.line_uptime_s=\"${rc}\""
+ else
+
+ echo "Line Uptime Seconds: ${et}"
+ echo "Line Uptime: ${rc}"
+ fi
}
#
@@ -147,35 +493,72 @@ line_data() {
local lsg
local latnu
local latnd
+ local satnu
+ local satnd
local snru
local snrd
+ local attndru
+ local attndrd
+ local sattndru
+ local sattndrd
+ local actatpu
+ local actatpd
lsg=$(dsl_cmd g997lsg 1 1)
latnd=$(dsl_val "$lsg" LATN)
+ satnd=$(dsl_val "$lsg" SATN)
snrd=$(dsl_val "$lsg" SNR)
+ attndrd=$(dsl_val "$lsg" ATTNDR)
+ actatpd=$(dsl_val "$lsg" ACTATP)
lsg=$(dsl_cmd g997lsg 0 1)
latnu=$(dsl_val "$lsg" LATN)
+ satnu=$(dsl_val "$lsg" SATN)
snru=$(dsl_val "$lsg" SNR)
+ attndru=$(dsl_val "$lsg" ATTNDR)
+ actatpu=$(dsl_val "$lsg" ACTATP)
[ -z "$latnd" ] && latnd=0
[ -z "$latnu" ] && latnu=0
+ [ -z "$satnd" ] && satnd=0
+ [ -z "$satnu" ] && satnu=0
[ -z "$snrd" ] && snrd=0
[ -z "$snru" ] && snru=0
latnd=$(dbt $latnd)
latnu=$(dbt $latnu)
+ satnd=$(dbt $satnd)
+ satnu=$(dbt $satnu)
snrd=$(dbt $snrd)
snru=$(dbt $snru)
+ actatpd=$(dbt $actatpd)
+ actatpu=$(dbt $actatpu)
+
+ [ -z "$attndrd" ] && attndrd=0
+ [ -z "$attndru" ] && attndru=0
+
+ sattndrd=$(scale $attndrd)
+ sattndru=$(scale $attndru)
if [ "$action" = "lucistat" ]; then
echo "dsl.line_attenuation_down=$latnd"
echo "dsl.line_attenuation_up=$latnu"
echo "dsl.noise_margin_down=$snrd"
echo "dsl.noise_margin_up=$snru"
+ echo "dsl.signal_attenuation_down=$satnd"
+ echo "dsl.signal_attenuation_up=$satnu"
+ echo "dsl.actatp_down=$actatpd"
+ echo "dsl.actatp_up=$actatpu"
+ echo "dsl.max_data_rate_down=$attndrd"
+ echo "dsl.max_data_rate_up=$attndru"
+ echo "dsl.max_data_rate_down_s=\"$sattndrd\""
+ echo "dsl.max_data_rate_up_s=\"$sattndru\""
else
- echo "Line Attenuation: ${latnd}dB / ${latnu}dB"
- echo "Noise Margin: ${snrd}dB / ${snru}dB"
+ echo "Line Attenuation (LATN): Down: ${latnd}dB / Up: ${latnu}dB"
+ echo "Signal Attenuation (SATN): Down: ${satnd}dB / Up: ${satnu}dB"
+ echo "Noise Margin (SNR): Down: ${snrd}dB / Up: ${snru}dB"
+ echo "Aggregate Transmit Power(ACTATP): Down: ${actatpd}dB / Up: ${actatpu}dB"
+ echo "Max. Attainable Data Rate (ATTNDR): Down: ${sattndrd}/s / Up: ${sattndru}/s"
fi
}
@@ -226,16 +609,21 @@ line_state() {
fi
else
if [ "$ls" = "0x801" ]; then
- echo "Line State: UP [$ls: $s]"
+ echo "Line State: UP [$ls: $s]"
else
- echo "Line State: DOWN [$ls: $s]"
+ echo "Line State: DOWN [$ls: $s]"
fi
fi
}
status() {
+ vendor
chipset
+ xtse
line_state
+ errors
+ power_mode
+ latency_delay
data_rates
line_data
line_uptime