diff options
Diffstat (limited to 'package/broadcom-wl/src/driver/proto/bcmevent.h')
-rw-r--r-- | package/broadcom-wl/src/driver/proto/bcmevent.h | 165 |
1 files changed, 0 insertions, 165 deletions
diff --git a/package/broadcom-wl/src/driver/proto/bcmevent.h b/package/broadcom-wl/src/driver/proto/bcmevent.h deleted file mode 100644 index 6c46beb7cd..0000000000 --- a/package/broadcom-wl/src/driver/proto/bcmevent.h +++ /dev/null @@ -1,165 +0,0 @@ -/* - * Broadcom Event protocol definitions - * - * Copyright 2007, Broadcom Corporation - * All Rights Reserved. - * - * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY - * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM - * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS - * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE. - * - * - * Dependencies: proto/bcmeth.h - * - * - */ - -/* - * Broadcom Ethernet Events protocol defines - * - */ - -#ifndef _BCMEVENT_H_ -#define _BCMEVENT_H_ - -/* enable structure packing */ -#if defined(__GNUC__) -#define PACKED __attribute__((packed)) -#else -#pragma pack(1) -#define PACKED -#endif /* defined(__GNUC__) */ - -#define BCM_EVENT_MSG_VERSION 1 /* wl_event_msg_t struct version */ -#define BCM_MSG_IFNAME_MAX 16 /* max length of interface name */ - -/* flags */ -#define WLC_EVENT_MSG_LINK 0x01 /* link is up */ -#define WLC_EVENT_MSG_FLUSHTXQ 0x02 /* flush tx queue on MIC error */ -#define WLC_EVENT_MSG_GROUP 0x04 /* group MIC error */ - -/* these fields are stored in network order */ -typedef struct -{ - uint16 version; - uint16 flags; /* see flags below */ - uint32 event_type; /* Message (see below) */ - uint32 status; /* Status code (see below) */ - uint32 reason; /* Reason code (if applicable) */ - uint32 auth_type; /* WLC_E_AUTH */ - uint32 datalen; /* data buf */ - struct ether_addr addr; /* Station address (if applicable) */ - char ifname[BCM_MSG_IFNAME_MAX]; /* name of the packet incoming interface */ -} PACKED wl_event_msg_t; - -/* used by driver msgs */ -typedef struct bcm_event { - struct ether_header eth; - bcmeth_hdr_t bcm_hdr; - wl_event_msg_t event; - /* data portion follows */ -} PACKED bcm_event_t; - -#define BCM_MSG_LEN (sizeof(bcm_event_t) - sizeof(bcmeth_hdr_t) - sizeof(struct ether_header)) - -/* Event messages */ -#define WLC_E_SET_SSID 0 /* indicates status of set SSID */ -#define WLC_E_JOIN 1 /* differentiates join IBSS from found (WLC_E_START) IBSS */ -#define WLC_E_START 2 /* STA founded an IBSS or AP started a BSS */ -#define WLC_E_AUTH 3 /* 802.11 AUTH request */ -#define WLC_E_AUTH_IND 4 /* 802.11 AUTH indication */ -#define WLC_E_DEAUTH 5 /* 802.11 DEAUTH request */ -#define WLC_E_DEAUTH_IND 6 /* 802.11 DEAUTH indication */ -#define WLC_E_ASSOC 7 /* 802.11 ASSOC request */ -#define WLC_E_ASSOC_IND 8 /* 802.11 ASSOC indication */ -#define WLC_E_REASSOC 9 /* 802.11 REASSOC request */ -#define WLC_E_REASSOC_IND 10 /* 802.11 REASSOC indication */ -#define WLC_E_DISASSOC 11 /* 802.11 DISASSOC request */ -#define WLC_E_DISASSOC_IND 12 /* 802.11 DISASSOC indication */ -#define WLC_E_QUIET_START 13 /* 802.11h Quiet period started */ -#define WLC_E_QUIET_END 14 /* 802.11h Quiet period ended */ -#define WLC_E_BEACON_RX 15 /* BEACONS received/lost indication */ -#define WLC_E_LINK 16 /* generic link indication */ -#define WLC_E_MIC_ERROR 17 /* TKIP MIC error occurred */ -#define WLC_E_NDIS_LINK 18 /* NDIS style link indication */ -#define WLC_E_ROAM 19 /* roam attempt occurred: indicate status & reason */ -#define WLC_E_TXFAIL 20 /* change in dot11FailedCount (txfail) */ -#define WLC_E_PMKID_CACHE 21 /* WPA2 pmkid cache indication */ -#define WLC_E_RETROGRADE_TSF 22 /* current AP's TSF value went backward */ -#define WLC_E_PRUNE 23 /* AP was pruned from join list for reason */ -#define WLC_E_AUTOAUTH 24 /* report AutoAuth table entry match for join attempt */ -#define WLC_E_EAPOL_MSG 25 /* Event encapsulating an EAPOL message */ -#define WLC_E_SCAN_COMPLETE 26 /* Scan results are ready or scan was aborted */ -#define WLC_E_ADDTS_IND 27 /* indicate to host addts fail/success */ -#define WLC_E_DELTS_IND 28 /* indicate to host delts fail/success */ -#define WLC_E_BCNSENT_IND 29 /* indicate to host of beacon transmit */ -#define WLC_E_BCNRX_MSG 30 /* Send the received beacon up to the host */ -#define WLC_E_BCNLOST_MSG 31 /* indicate to host loss of beacon */ -#define WLC_E_ROAM_PREP 32 /* before attempting to roam */ -#define WLC_E_PFN_NET_FOUND 33 /* PFN network found event */ -#define WLC_E_PFN_NET_LOST 34 /* PFN network lost event */ - -#ifdef EXT_STA -#define WLC_E_RESET_COMPLETE 35 -#define WLC_E_JOIN_START 36 -#define WLC_E_ROAM_START 37 -#define WLC_E_ASSOC_START 38 -#define WLC_E_IBSS_ASSOC 39 -#define WLC_E_RADIO 40 -#define WLC_E_LAST 41 /* highest val + 1 for range checking */ -#else /* EXT_STA */ -#define WLC_E_LAST 35 /* highest val + 1 for range checking */ -#endif /* EXT_STA */ - -/* Event status codes */ -#define WLC_E_STATUS_SUCCESS 0 /* operation was successful */ -#define WLC_E_STATUS_FAIL 1 /* operation failed */ -#define WLC_E_STATUS_TIMEOUT 2 /* operation timed out */ -#define WLC_E_STATUS_NO_NETWORKS 3 /* failed due to no matching network found */ -#define WLC_E_STATUS_ABORT 4 /* operation was aborted */ -#define WLC_E_STATUS_NO_ACK 5 /* protocol failure: packet not ack'd */ -#define WLC_E_STATUS_UNSOLICITED 6 /* AUTH or ASSOC packet was unsolicited */ -#define WLC_E_STATUS_ATTEMPT 7 /* attempt to assoc to an auto auth configuration */ -#define WLC_E_STATUS_PARTIAL 8 /* scan results are incomplete */ -#define WLC_E_STATUS_NEWSCAN 9 /* scan aborted by another scan */ -#define WLC_E_STATUS_NEWASSOC 10 /* scan aborted due to assoc in progress */ -#define WLC_E_STATUS_11HQUIET 11 /* 802.11h quiet period started */ -#define WLC_E_STATUS_SUPPRESS 12 /* user disabled scanning (WLC_SET_SCANSUPPRESS) */ -#define WLC_E_STATUS_NOCHANS 13 /* no allowable channels to scan */ -#define WLC_E_STATUS_CCXFASTRM 14 /* scan aborted due to CCX fast roam */ - -/* roam reason codes */ -#define WLC_E_REASON_INITIAL_ASSOC 0 /* initial assoc */ -#define WLC_E_REASON_LOW_RSSI 1 /* roamed due to low RSSI */ -#define WLC_E_REASON_DEAUTH 2 /* roamed due to DEAUTH indication */ -#define WLC_E_REASON_DISASSOC 3 /* roamed due to DISASSOC indication */ -#define WLC_E_REASON_BCNS_LOST 4 /* roamed due to lost beacons */ -#define WLC_E_REASON_FAST_ROAM_FAILED 5 /* roamed due to fast roam failure */ -#define WLC_E_REASON_DIRECTED_ROAM 6 /* roamed due to request by AP */ -#define WLC_E_REASON_TSPEC_REJECTED 7 /* roamed due to TSPEC rejection */ -#define WLC_E_REASON_BETTER_AP 8 /* roamed due to finding better AP */ - -/* prune reason codes */ -#define WLC_E_PRUNE_ENCR_MISMATCH 1 /* encryption mismatch */ -#define WLC_E_PRUNE_BCAST_BSSID 2 /* AP uses a broadcast BSSID */ -#define WLC_E_PRUNE_MAC_DENY 3 /* STA's MAC addr is in AP's MAC deny list */ -#define WLC_E_PRUNE_MAC_NA 4 /* STA's MAC addr is not in AP's MAC allow list */ -#define WLC_E_PRUNE_REG_PASSV 5 /* AP not allowed due to regulatory restriction */ -#define WLC_E_PRUNE_SPCT_MGMT 6 /* AP does not support STA locale spectrum mgmt */ -#define WLC_E_PRUNE_RADAR 7 /* AP is on a radar channel of STA locale */ -#define WLC_E_RSN_MISMATCH 8 /* STA does not support AP's RSN */ -#define WLC_E_PRUNE_NO_COMMON_RATES 9 /* No rates in common with AP */ -#define WLC_E_PRUNE_BASIC_RATES 10 /* STA does not support all basic rates of BSS */ -#define WLC_E_PRUNE_CIPHER_NA 12 /* BSS's cipher not supported */ -#define WLC_E_PRUNE_KNOWN_STA 13 /* AP is already known to us as a STA */ -#define WLC_E_PRUNE_WDS_PEER 15 /* AP is already known to us as a WDS peer */ -#define WLC_E_PRUNE_QBSS_LOAD 16 /* QBSS LOAD - AAC is too low */ -#define WLC_E_PRUNE_HOME_AP 17 /* prune home AP */ - -#undef PACKED -#if !defined(__GNUC__) -#pragma pack() -#endif /* PACKED */ - -#endif /* _BCMEVENT_H_ */ |