aboutsummaryrefslogtreecommitdiffstats
path: root/package/mac80211
diff options
context:
space:
mode:
Diffstat (limited to 'package/mac80211')
-rw-r--r--package/mac80211/patches/300-pending_work.patch2
-rw-r--r--package/mac80211/patches/701-mwl8k-don-t-overwrite-regulatory-settings.patch70
-rw-r--r--package/mac80211/patches/702-mwl8k-always-apply-configuration-even-when-device-is.patch44
3 files changed, 115 insertions, 1 deletions
diff --git a/package/mac80211/patches/300-pending_work.patch b/package/mac80211/patches/300-pending_work.patch
index cf51aae5cc..3a09420321 100644
--- a/package/mac80211/patches/300-pending_work.patch
+++ b/package/mac80211/patches/300-pending_work.patch
@@ -300,7 +300,7 @@
static void ieee80211_iface_work(struct work_struct *work)
{
struct ieee80211_sub_if_data *sdata =
-@@ -1126,6 +1175,9 @@ static void ieee80211_iface_work(struct
+@@ -1126,6 +1175,9 @@ static void ieee80211_iface_work(struct
break;
ieee80211_mesh_rx_queued_mgmt(sdata, skb);
break;
diff --git a/package/mac80211/patches/701-mwl8k-don-t-overwrite-regulatory-settings.patch b/package/mac80211/patches/701-mwl8k-don-t-overwrite-regulatory-settings.patch
new file mode 100644
index 0000000000..dd6348f702
--- /dev/null
+++ b/package/mac80211/patches/701-mwl8k-don-t-overwrite-regulatory-settings.patch
@@ -0,0 +1,70 @@
+From f340b99171e923eb6b54c1d0c22c15b45df40647 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 11 Mar 2013 17:17:28 +0100
+Subject: [PATCH] mwl8k: don't overwrite regulatory settings
+
+Currently the caps are parsed on every firmware reload, causing any
+channel flags to be cleared.
+When there is a firmware to interface mode mismatch, the triggered
+firmware reload causes a reset of the regulatory settings, causing all
+channels to become available:
+
+root@openrouter:/# iw phy phy0 info
+Wiphy phy0
+ Band 1:
+ (...)
+ Frequencies:
+ * 2412 MHz [1] (0.0 dBm)
+ * 2417 MHz [2] (0.0 dBm)
+ * 2422 MHz [3] (0.0 dBm)
+ * 2427 MHz [4] (0.0 dBm)
+ * 2432 MHz [5] (0.0 dBm)
+ * 2437 MHz [6] (0.0 dBm)
+ * 2442 MHz [7] (0.0 dBm)
+ * 2447 MHz [8] (0.0 dBm)
+ * 2452 MHz [9] (0.0 dBm)
+ * 2457 MHz [10] (0.0 dBm)
+ * 2462 MHz [11] (0.0 dBm)
+ * 2467 MHz [12] (0.0 dBm)
+ * 2472 MHz [13] (0.0 dBm)
+ * 2484 MHz [14] (0.0 dBm)
+ (...)
+
+To prevent this, only parse the caps on the first firmware load during
+hardware probe, and store them locally to know we have already parsed
+them.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/wireless/mwl8k.c | 6 ++++++
+ 1 file changed, 6 insertions(+)
+
+--- a/drivers/net/wireless/mwl8k.c
++++ b/drivers/net/wireless/mwl8k.c
+@@ -232,6 +232,7 @@ struct mwl8k_priv {
+ u16 num_mcaddrs;
+ u8 hw_rev;
+ u32 fw_rev;
++ u32 caps;
+
+ /*
+ * Running count of TX packets in flight, to avoid
+@@ -2401,6 +2402,9 @@ mwl8k_set_caps(struct ieee80211_hw *hw,
+ {
+ struct mwl8k_priv *priv = hw->priv;
+
++ if (priv->caps)
++ return;
++
+ if ((caps & MWL8K_CAP_2GHZ4) || !(caps & MWL8K_CAP_BAND_MASK)) {
+ mwl8k_setup_2ghz_band(hw);
+ if (caps & MWL8K_CAP_MIMO)
+@@ -2412,6 +2416,8 @@ mwl8k_set_caps(struct ieee80211_hw *hw,
+ if (caps & MWL8K_CAP_MIMO)
+ mwl8k_set_ht_caps(hw, &priv->band_50, caps);
+ }
++
++ priv->caps = caps;
+ }
+
+ static int mwl8k_cmd_get_hw_spec_sta(struct ieee80211_hw *hw)
diff --git a/package/mac80211/patches/702-mwl8k-always-apply-configuration-even-when-device-is.patch b/package/mac80211/patches/702-mwl8k-always-apply-configuration-even-when-device-is.patch
new file mode 100644
index 0000000000..ff254790d7
--- /dev/null
+++ b/package/mac80211/patches/702-mwl8k-always-apply-configuration-even-when-device-is.patch
@@ -0,0 +1,44 @@
+From 5d1ed64614ccb21c26bc0ee321e9c51b6359ceb8 Mon Sep 17 00:00:00 2001
+From: Jonas Gorski <jogo@openwrt.org>
+Date: Mon, 25 Mar 2013 15:37:42 +0100
+Subject: [PATCH] mwl8k: always apply configuration even when device is idle
+
+Fix settings not being applied when the device is idle and the firmware
+gets reloaded (because of changing from STA to AP mode). This caused
+the device using the wrong channel (and likely band), e.g. a 5 GHz only
+card still defaulted to channel 6 in the 2.4 GHz band when left
+unconfigured.
+
+This issue was always present, but only made visible with "mwl8k: Do not
+call mwl8k_cmd_set_rf_channel unconditionally" (0f4316b9), since before
+that the channel was (re-)configured at the next _config call even when
+it did not change from the mac80211 perspective.
+
+Signed-off-by: Jonas Gorski <jogo@openwrt.org>
+---
+ drivers/net/wireless/mwl8k.c | 10 ++++------
+ 1 file changed, 4 insertions(+), 6 deletions(-)
+
+--- a/drivers/net/wireless/mwl8k.c
++++ b/drivers/net/wireless/mwl8k.c
+@@ -4818,16 +4818,14 @@ static int mwl8k_config(struct ieee80211
+ struct mwl8k_priv *priv = hw->priv;
+ int rc;
+
+- if (conf->flags & IEEE80211_CONF_IDLE) {
+- mwl8k_cmd_radio_disable(hw);
+- return 0;
+- }
+-
+ rc = mwl8k_fw_lock(hw);
+ if (rc)
+ return rc;
+
+- rc = mwl8k_cmd_radio_enable(hw);
++ if (conf->flags & IEEE80211_CONF_IDLE)
++ rc = mwl8k_cmd_radio_disable(hw);
++ else
++ rc = mwl8k_cmd_radio_enable(hw);
+ if (rc)
+ goto out;
+