diff options
Diffstat (limited to 'target/linux/brcm63xx/files-2.6.30')
65 files changed, 0 insertions, 12727 deletions
diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Kconfig b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Kconfig deleted file mode 100644 index ac0b44e92f..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -menu "CPU support" - depends on BCM63XX - -config BCM63XX_CPU_6338 - bool "support 6338 CPU" - select HW_HAS_PCI - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_UDC - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - -config BCM63XX_CPU_6345 - bool "support 6345 CPU" - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - -config BCM63XX_CPU_6348 - bool "support 6348 CPU" - select HW_HAS_PCI - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_UDC - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - -config BCM63XX_CPU_6358 - bool "support 6358 CPU" - select HW_HAS_PCI - select USB_ARCH_HAS_OHCI - select USB_OHCI_BIG_ENDIAN_DESC - select USB_OHCI_BIG_ENDIAN_MMIO - select USB_ARCH_HAS_EHCI - select USB_EHCI_BIG_ENDIAN_MMIO -endmenu - -source "arch/mips/bcm63xx/boards/Kconfig" diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Makefile b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Makefile deleted file mode 100644 index b9343a8d6c..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/Makefile +++ /dev/null @@ -1,13 +0,0 @@ -obj-y += clk.o cpu.o cs.o gpio.o irq.o prom.o setup.o timer.o -obj-y += dev-uart.o -obj-y += dev-pcmcia.o -obj-y += dev-usb-ohci.o -obj-y += dev-usb-ehci.o -obj-y += dev-usb-udc.o -obj-y += dev-enet.o -obj-y += dev-wdt.o -obj-y += dev-spi.o -obj-y += dev-dsp.o -obj-$(CONFIG_EARLY_PRINTK) += early_printk.o - -obj-y += boards/ diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig deleted file mode 100644 index 970615e672..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -choice - prompt "Board support" - depends on BCM63XX - default BOARD_BCM963XX - -config BOARD_BCM963XX - bool "Generic Broadcom 963xx boards" - help - -config BOARD_LIVEBOX - bool "Inventel Livebox(es) boards" - help - Boards using RedBoot. - -endchoice diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile deleted file mode 100644 index 098137b595..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_BOARD_BCM963XX) += board_bcm963xx.o -obj-$(CONFIG_BOARD_LIVEBOX) += board_livebox.o diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c deleted file mode 100644 index 280383a6ac..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_bcm963xx.c +++ /dev/null @@ -1,1008 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <linux/ssb/ssb.h> -#include <linux/gpio_buttons.h> -#include <asm/addrspace.h> -#include <bcm63xx_board.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> -#include <bcm63xx_board.h> -#include <bcm63xx_dev_pci.h> -#include <bcm63xx_dev_uart.h> -#include <bcm63xx_dev_wdt.h> -#include <bcm63xx_dev_enet.h> -#include <bcm63xx_dev_dsp.h> -#include <bcm63xx_dev_pcmcia.h> -#include <bcm63xx_dev_usb_ohci.h> -#include <bcm63xx_dev_usb_ehci.h> -#include <bcm63xx_dev_usb_udc.h> -#include <bcm63xx_dev_spi.h> -#include <board_bcm963xx.h> -#include <linux/input.h> - -#define PFX "board_bcm963xx: " - -static struct bcm963xx_nvram nvram; -static unsigned int mac_addr_used = 0; -static struct board_info board; - -/* - * known 6338 boards - */ - -#ifdef CONFIG_BCM63XX_CPU_6338 -static struct board_info __initdata board_96338gw = { - .name = "96338GW", - .expected_cpu_id = 0x6338, - - .has_enet0 = 1, - .enet0 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, - - .leds = { - { - .name = "adsl", - .gpio = 3, - .active_low = 1, - }, - { - .name = "ses", - .gpio = 5, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 4, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - } - }, -}; - -static struct board_info __initdata board_96338w = { - .name = "96338W", - .expected_cpu_id = 0x6338, - - .has_enet0 = 1, - .enet0 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .leds = { - { - .name = "adsl", - .gpio = 3, - .active_low = 1, - }, - { - .name = "ses", - .gpio = 5, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 4, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - }, - }, -}; -#endif - -/* - * known 6345 boards - */ -#ifdef CONFIG_BCM63XX_CPU_6345 -static struct board_info __initdata board_96345gw2 = { - .name = "96345GW2", - .expected_cpu_id = 0x6345, -}; -#endif - -/* - * known 6348 boards - */ -#ifdef CONFIG_BCM63XX_CPU_6348 -static struct board_info __initdata board_96348r = { - .name = "96348R", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .leds = { - { - .name = "adsl-fail", - .gpio = 2, - .active_low = 1, - }, - { - .name = "ppp", - .gpio = 3, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 4, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - }, - }, -}; - -static struct board_info __initdata board_96348gw_10 = { - .name = "96348GW-10", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, - - .has_dsp = 1, - .dsp = { - .gpio_rst = 6, - .gpio_int = 34, - .cs = 2, - .ext_irq = 2, - }, - - .leds = { - { - .name = "adsl-fail", - .gpio = 2, - .active_low = 1, - }, - { - .name = "ppp", - .gpio = 3, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 4, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - }, - }, -}; - -static struct board_info __initdata board_96348gw_11 = { - .name = "96348GW-11", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, - - .leds = { - { - .name = "adsl-fail", - .gpio = 2, - .active_low = 1, - }, - { - .name = "ppp", - .gpio = 3, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 4, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - }, - }, - .reset_buttons = { - { - .desc = "reset", - .gpio = 32, - .active_low = 1, - .type = EV_KEY, - .code = BTN_0, - .threshold = 3, - }, - }, -}; - -static struct board_info __initdata board_96348gw = { - .name = "96348GW", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, - .has_dsp = 1, - - .dsp = { - .gpio_rst = 6, - .gpio_int = 34, - .ext_irq = 2, - .cs = 2, - }, - - .leds = { - { - .name = "adsl-fail", - .gpio = 2, - .active_low = 1, - }, - { - .name = "power", - .gpio = 0, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 1, - .active_low = 1, - }, - { - .name = "line1", - .gpio = 4, - .active_low = 1, - }, - { - .name = "line2", - .gpio = 5, - .active_low = 1, - }, - { .name = "line3", - .gpio = 6, - .active_low = 1, - }, - { - .name = "tel", - .gpio = 7, - .active_low = 1, - }, - { - .name = "eth", - .gpio = 35, - .active_low = 1, - }, - }, - .reset_buttons = { - { - .desc = "reset", - .gpio = 36, - .active_low = 1, - .type = EV_KEY, - .code = BTN_0, - .threshold = 3, - }, - }, -}; - -static struct board_info __initdata board_FAST2404 = { - .name = "F@ST2404", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -}; - -static struct board_info __initdata board_DV201AMR = { - .name = "DV201AMR", - .expected_cpu_id = 0x6348, - - .has_pci = 1, - .has_ohci0 = 1, - .has_udc0 = 1, - - .has_enet0 = 1, - .has_enet1 = 1, - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -}; - -static struct board_info __initdata board_96348gw_a = { - .name = "96348GW-A", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, -}; - -static struct board_info __initdata board_rta1025w_16 = { - .name = "RTA1025W_16", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, -}; -#endif - -/* - * known 6358 boards - */ -#ifdef CONFIG_BCM63XX_CPU_6358 -static struct board_info __initdata board_96358vw = { - .name = "96358VW", - .expected_cpu_id = 0x6358, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, - - .leds = { - { - .name = "adsl-fail", - .gpio = 15, - .active_low = 1, - }, - { - .name = "ppp", - .gpio = 22, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 23, - .active_low = 1, - }, - { - .name = "power", - .gpio = 4, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 5, - }, - }, -}; - -static struct board_info __initdata board_96358vw2 = { - .name = "96358VW2", - .expected_cpu_id = 0x6358, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, - - .leds = { - { - .name = "adsl", - .gpio = 22, - .active_low = 1, - }, - { - .name = "ppp-fail", - .gpio = 23, - }, - { - .name = "power", - .gpio = 5, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "stop", - .gpio = 4, - .active_low = 1, - }, - }, -}; - -static struct board_info __initdata board_AGPFS0 = { - .name = "AGPF-S0", - .expected_cpu_id = 0x6358, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, - .has_ehci0 = 1, - - .leds = { - /*Each led on alice gate is bi-color so final char */ - /* is r for red and g for green leds */ - { - .name = "pwrr", - .gpio = 5, - .active_low = 1, - }, - { - .name = "pwrg", - .gpio = 4, - .active_low = 1, - .default_trigger = "default-on", - }, - { - .name = "wifir", - .gpio = 23, - .active_low = 1, - }, - { - .name = "wifig", - .gpio = 22, - .active_low = 1, - }, - { - .name = "usr1r", - .gpio = 27, - .active_low = 1, - }, - { - .name = "usr1g", - .gpio = 26, - .active_low = 1, - }, - { - .name = "usr2r", - .gpio = 30, - .active_low = 1, - }, - { - .name = "usr2g", - .gpio = 29, - .active_low = 1, - }, - }, - - .reset_buttons = { - { - .desc = "sw2", - .gpio = 37, - .active_low = 1, - .type = EV_KEY, - .code = BTN_0, - .threshold = 3, - }, - }, - /* sw1 is connected to gpio34*/ -}; - -static struct board_info __initdata board_DWVS0 = { - .name = "DWV-S0", - .expected_cpu_id = 0x6358, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, -}; -#endif - -/* - * all boards - */ -static const struct board_info __initdata *bcm963xx_boards[] = { -#ifdef CONFIG_BCM63XX_CPU_6338 - &board_96338gw, - &board_96338w, -#endif -#ifdef CONFIG_BCM63XX_CPU_6345 - &board_96345gw2, -#endif -#ifdef CONFIG_BCM63XX_CPU_6348 - &board_96348r, - &board_96348gw, - &board_96348gw_10, - &board_96348gw_11, - &board_FAST2404, - &board_DV201AMR, - &board_96348gw_a, - &board_rta1025w_16, -#endif - -#ifdef CONFIG_BCM63XX_CPU_6358 - &board_96358vw, - &board_96358vw2, - &board_AGPFS0, - &board_DWVS0, -#endif -}; - -/* - * early init callback, read nvram data from flash and checksum it - */ -void __init board_prom_init(void) -{ - unsigned int check_len, i; - u8 *boot_addr, *cfe, *p; - char cfe_version[32]; - u32 val; - - /* read base address of boot chip select (0) - * 6345 does not have MPI but boots from standard - * MIPS Flash address */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } - boot_addr = (u8 *)KSEG1ADDR(val); - - /* dump cfe version */ - cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET; - if (!memcmp(cfe, "cfe-v", 5)) - snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u", - cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]); - else - strcpy(cfe_version, "unknown"); - printk(KERN_INFO PFX "CFE version: %s\n", cfe_version); - - /* extract nvram data */ - memcpy(&nvram, boot_addr + BCM963XX_NVRAM_OFFSET, sizeof(nvram)); - - /* check checksum before using data */ - if (nvram.version <= 4) - check_len = offsetof(struct bcm963xx_nvram, checksum_old); - else - check_len = sizeof(nvram); - val = 0; - p = (u8 *)&nvram; - while (check_len--) - val += *p; - if (val) { - printk(KERN_ERR PFX "invalid nvram checksum\n"); - return; - } - - /* find board by name */ - for (i = 0; i < ARRAY_SIZE(bcm963xx_boards); i++) { - if (strncmp(nvram.name, bcm963xx_boards[i]->name, - sizeof(nvram.name))) - continue; - /* copy, board desc array is marked initdata */ - memcpy(&board, bcm963xx_boards[i], sizeof(board)); - break; - } - - /* bail out if board is not found, will complain later */ - if (!board.name[0]) { - char name[17]; - memcpy(name, nvram.name, 16); - name[16] = 0; - printk(KERN_ERR PFX "unknown bcm963xx board: %s\n", - name); - return; - } - - /* setup pin multiplexing depending on board enabled device, - * this has to be done this early since PCI init is done - * inside arch_initcall */ - val = 0; -#ifdef CONFIG_PCI - if (board.has_pci) { - bcm63xx_pci_enabled = 1; - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G2_PCI; - } -#endif - if (board.has_pccard) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G1_MII_PCCARD; - } - - if (board.has_enet0 && !board.enet0.use_internal_phy) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; - } - - if (board.has_enet1 && !board.enet1.use_internal_phy) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); -} - -/* - * second stage init callback, good time to panic if we couldn't - * identify on which board we're running since early printk is working - */ -void __init board_setup(void) -{ - if (!board.name[0]) - panic("unable to detect bcm963xx board"); - printk(KERN_INFO PFX "board name: %s\n", board.name); - - /* make sure we're running on expected cpu */ - if (bcm63xx_get_cpu_id() != board.expected_cpu_id) - panic("unexpected CPU for bcm963xx board"); -} - -/* - * return board name for /proc/cpuinfo - */ -const char *board_get_name(void) -{ - return board.name; -} - -/* - * register & return a new board mac address - */ -static int board_get_mac_address(u8 *mac) -{ - u8 *p; - int count; - - if (mac_addr_used >= nvram.mac_addr_count) { - printk(KERN_ERR PFX "not enough mac address\n"); - return -ENODEV; - } - - memcpy(mac, nvram.mac_addr_base, ETH_ALEN); - p = mac + ETH_ALEN - 1; - count = mac_addr_used; - - while (count--) { - do { - (*p)++; - if (*p != 0) - break; - p--; - } while (p != mac); - } - - if (p == mac) { - printk(KERN_ERR PFX "unable to fetch mac address\n"); - return -ENODEV; - } - - mac_addr_used++; - return 0; -} - -static struct resource mtd_resources[] = { - { - .start = 0, /* filled at runtime */ - .end = 0, /* filled at runtime */ - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device mtd_dev = { - .name = "bcm963xx-flash", - .resource = mtd_resources, - .num_resources = ARRAY_SIZE(mtd_resources), -}; - -/* - * Register a sane SPROMv2 to make the on-board - * bcm4318 WLAN work - */ -static struct ssb_sprom bcm63xx_sprom = { - .revision = 0x02, - .board_rev = 0x17, - .country_code = 0x0, - .ant_available_bg = 0x3, - .pa0b0 = 0x15ae, - .pa0b1 = 0xfa85, - .pa0b2 = 0xfe8d, - .pa1b0 = 0xffff, - .pa1b1 = 0xffff, - .pa1b2 = 0xffff, - .gpio0 = 0xff, - .gpio1 = 0xff, - .gpio2 = 0xff, - .gpio3 = 0xff, - .maxpwr_bg = 0x004c, - .itssi_bg = 0x00, - .boardflags_lo = 0x2848, - .boardflags_hi = 0x0000, -}; - -static struct resource gpiodev_resource = { - .start = 0xFFFFFFFF, -}; - -static struct gpio_led_platform_data bcm63xx_led_data; - -static struct platform_device bcm63xx_gpio_leds = { - .name = "leds-gpio", - .id = 0, - .dev.platform_data = &bcm63xx_led_data, -}; - -static struct gpio_buttons_platform_data bcm63xx_gpio_buttons_data = { - .poll_interval = 20, -}; - -static struct platform_device bcm63xx_gpio_buttons_device = { - .name = "gpio-buttons", - .id = 0, - .dev.platform_data = &bcm63xx_gpio_buttons_data, -}; - - -/* - * third stage init callback, register all board devices. - */ -int __init board_register_devices(void) -{ - u32 val; - int led_count = 0; - - bcm63xx_uart_register(); - bcm63xx_wdt_register(); - - if (!BCMCPU_IS_6345()) - bcm63xx_spi_register(); - - if (board.has_pccard) - bcm63xx_pcmcia_register(); - - if (board.has_enet0 && - !board_get_mac_address(board.enet0.mac_addr)) - bcm63xx_enet_register(0, &board.enet0); - - if (board.has_enet1 && - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - - if (board.has_ohci0) - bcm63xx_ohci_register(); - - if (board.has_ehci0) - bcm63xx_ehci_register(); - - if (board.has_udc0) - bcm63xx_udc_register(); - - if (board.has_dsp) - bcm63xx_dsp_register(&board.dsp); - - /* Generate MAC address for WLAN and - * register our SPROM */ -#ifdef CONFIG_PCI - if (!board_get_mac_address(bcm63xx_sprom.il0mac)) { - memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN); - memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN); - if (ssb_arch_set_fallback_sprom(&bcm63xx_sprom) < 0) - printk(KERN_ERR "failed to register fallback SPROM\n"); - } -#endif - - /* read base address of boot chip select (0) */ - if (BCMCPU_IS_6345()) - val = 0x1fc00000; - else { - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - } - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - - platform_device_register(&mtd_dev); - - /* Register GPIODEV */ - platform_device_register_simple("GPIODEV", 0, &gpiodev_resource, 1); - - /* count number of LEDs defined by this device */ - while (led_count < ARRAY_SIZE(board.leds) && board.leds[led_count].name) - led_count++; - - bcm63xx_led_data.num_leds = led_count; - bcm63xx_led_data.leds = board.leds; - - platform_device_register(&bcm63xx_gpio_leds); - - if (board.reset_buttons) { - bcm63xx_gpio_buttons_data.nbuttons = ARRAY_SIZE(board.reset_buttons); - bcm63xx_gpio_buttons_data.buttons = board.reset_buttons; - - platform_device_register(&bcm63xx_gpio_buttons_device); - } - - return 0; -} - diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c deleted file mode 100644 index 06ca83b591..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/boards/board_livebox.c +++ /dev/null @@ -1,227 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/string.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/physmap.h> -#include <asm/addrspace.h> -#include <bcm63xx_board.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> -#include <bcm63xx_board.h> -#include <bcm63xx_dev_pci.h> -#include <bcm63xx_dev_uart.h> -#include <bcm63xx_dev_wdt.h> -#include <bcm63xx_dev_enet.h> -#include <bcm63xx_dev_pcmcia.h> -#include <bcm63xx_dev_usb_ohci.h> -#include <bcm63xx_dev_usb_ehci.h> -#include <board_bcm963xx.h> - -#define PFX "board_livebox: " - -static unsigned int mac_addr_used = 0; -static struct board_info board; - -/* - * known 6348 boards - */ -#ifdef CONFIG_BCM63XX_CPU_6348 -static struct board_info __initdata board_livebox = { - .name = "Livebox", - .expected_cpu_id = 0x6348, - - .has_enet0 = 1, - .has_enet1 = 1, - .has_pci = 1, - - .enet0 = { - .has_phy = 1, - .use_internal_phy = 1, - }, - - .enet1 = { - .force_speed_100 = 1, - .force_duplex_full = 1, - }, - - .has_ohci0 = 1, - .has_pccard = 1, - .has_ehci0 = 1, -}; -#endif - -/* - * all boards - */ -static const struct board_info __initdata *bcm963xx_boards[] = { -#ifdef CONFIG_BCM63XX_CPU_6348 - &board_livebox -#endif -}; - -/* - * early init callback - */ -void __init board_prom_init(void) -{ - u32 val; - - /* read base address of boot chip select (0) */ - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - - /* assume board is a Livebox */ - memcpy(&board, bcm963xx_boards[0], sizeof(board)); - - /* setup pin multiplexing depending on board enabled device, - * this has to be done this early since PCI init is done - * inside arch_initcall */ - val = 0; - - if (board.has_pci) { - bcm63xx_pci_enabled = 1; - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G2_PCI; - } - - if (board.has_pccard) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G1_MII_PCCARD; - } - - if (board.has_enet0 && !board.enet0.use_internal_phy) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; - } - - if (board.has_enet1 && !board.enet1.use_internal_phy) { - if (BCMCPU_IS_6348()) - val |= GPIO_MODE_6348_G3_EXT_MII | - GPIO_MODE_6348_G0_EXT_MII; - } - - bcm_gpio_writel(val, GPIO_MODE_REG); -} - -/* - * second stage init callback, good time to panic if we couldn't - * identify on which board we're running since early printk is working - */ -void __init board_setup(void) -{ - if (!board.name[0]) - panic("unable to detect bcm963xx board"); - printk(KERN_INFO PFX "board name: %s\n", board.name); - - /* make sure we're running on expected cpu */ - if (bcm63xx_get_cpu_id() != board.expected_cpu_id) - panic("unexpected CPU for bcm963xx board"); -} - -/* - * return board name for /proc/cpuinfo - */ -const char *board_get_name(void) -{ - return board.name; -} - -/* - * register & return a new board mac address - */ - -static int board_get_mac_address(u8 *mac) -{ - u8 default_mac[ETH_ALEN] = {0x00, 0x07, 0x3A, 0x00, 0x00, 0x00}; - u8 *p; - int count; - - memcpy(mac, default_mac, ETH_ALEN); - - p = mac + ETH_ALEN - 1; - count = mac_addr_used; - - while (count--) { - do { - (*p)++; - if (*p != 0) - break; - p--; - } while (p != mac); - } - - if (p == mac) { - printk(KERN_ERR PFX "unable to fetch mac address\n"); - return -ENODEV; - } - mac_addr_used++; - - return 0; -} - -static struct resource mtd_resources[] = { - { - .start = 0, /* filled at runtime */ - .end = 0, /* filled at runtime */ - .flags = IORESOURCE_MEM, - } -}; - -static struct platform_device mtd_dev = { - .name = "bcm963xx-flash", - .resource = mtd_resources, - .num_resources = ARRAY_SIZE(mtd_resources), -}; - - -/* - * third stage init callback, register all board devices. - */ -int __init board_register_devices(void) -{ - u32 val; - - bcm63xx_uart_register(); - bcm63xx_wdt_register(); - - if (board.has_pccard) - bcm63xx_pcmcia_register(); - - if (board.has_enet0 && - !board_get_mac_address(board.enet0.mac_addr)) - bcm63xx_enet_register(0, &board.enet0); - - if (board.has_enet1 && - !board_get_mac_address(board.enet1.mac_addr)) - bcm63xx_enet_register(1, &board.enet1); - - if (board.has_ohci0) - bcm63xx_ohci_register(); - - if (board.has_ehci0) - bcm63xx_ehci_register(); - - - /* read base address of boot chip select (0) */ - val = bcm_mpi_readl(MPI_CSBASE_REG(0)); - val &= MPI_CSBASE_BASE_MASK; - mtd_resources[0].start = val; - mtd_resources[0].end = 0x1FFFFFFF; - - platform_device_register(&mtd_dev); - - return 0; -} - diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/clk.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/clk.c deleted file mode 100644 index eaf6196c75..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/clk.c +++ /dev/null @@ -1,249 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_clk.h> - -DEFINE_MUTEX(clocks_mutex); - - -static void clk_enable_unlocked(struct clk *clk) -{ - if (clk->set && (clk->usage++) == 0) - clk->set(clk, 1); -} - -static void clk_disable_unlocked(struct clk *clk) -{ - if (clk->set && (--clk->usage) == 0) - clk->set(clk, 0); -} - -static void bcm_hwclock_set(u32 mask, int enable) -{ - u32 reg; - - reg = bcm_perf_readl(PERF_CKCTL_REG); - if (enable) - reg |= mask; - else - reg &= ~mask; - bcm_perf_writel(reg, PERF_CKCTL_REG); -} - -/* - * Ethernet MAC "misc" clock: dma clocks and main clock on 6348 - */ -static void enet_misc_set(struct clk *clk, int enable) -{ - u32 mask; - - if (BCMCPU_IS_6338()) - mask = CKCTL_6338_ENET_EN; - else if (BCMCPU_IS_6345()) - mask = CKCTL_6345_ENET_EN; - else if (BCMCPU_IS_6348()) - mask = CKCTL_6348_ENET_EN; - else - /* BCMCPU_IS_6358 */ - mask = CKCTL_6358_EMUSB_EN; - bcm_hwclock_set(mask, enable); -} - -static struct clk clk_enet_misc = { - .set = enet_misc_set, -}; - -/* - * Ethernet MAC clocks: only revelant on 6358, silently enable misc - * clocks - */ -static void enetx_set(struct clk *clk, int enable) -{ - if (enable) - clk_enable_unlocked(&clk_enet_misc); - else - clk_disable_unlocked(&clk_enet_misc); - - if (BCMCPU_IS_6358()) { - u32 mask; - - if (clk->id == 0) - mask = CKCTL_6358_ENET0_EN; - else - mask = CKCTL_6358_ENET1_EN; - bcm_hwclock_set(mask, enable); - } -} - -static struct clk clk_enet0 = { - .id = 0, - .set = enetx_set, -}; - -static struct clk clk_enet1 = { - .id = 1, - .set = enetx_set, -}; - -/* - * Ethernet PHY clock - */ -static void ephy_set(struct clk *clk, int enable) -{ - if (!BCMCPU_IS_6358()) - return; - bcm_hwclock_set(CKCTL_6358_EPHY_EN, enable); -} - - -static struct clk clk_ephy = { - .set = ephy_set, -}; - -/* - * PCM clock - */ -static void pcm_set(struct clk *clk, int enable) -{ - if (!BCMCPU_IS_6358()) - return; - bcm_hwclock_set(CKCTL_6358_PCM_EN, enable); -} - -static struct clk clk_pcm = { - .set = pcm_set, -}; - -/* - * USB host clock - */ -static void usbh_set(struct clk *clk, int enable) -{ - if (!BCMCPU_IS_6348()) - return; - bcm_hwclock_set(CKCTL_6348_USBH_EN, enable); -} - -static struct clk clk_usbh = { - .set = usbh_set, -}; - -/* - * USB slave clock - */ -static void usbs_set(struct clk *clk, int enable) -{ - u32 mask; - - switch(bcm63xx_get_cpu_id()) { - case BCM6338_CPU_ID: mask = CKCTL_6338_USBS_EN; break; - case BCM6345_CPU_ID: mask = CKCTL_6345_USBS_EN; break; - case BCM6348_CPU_ID: mask = CKCTL_6348_USBS_EN; break; - default: - return; - } - bcm_hwclock_set(mask, enable); -} - -static struct clk clk_usbs = { - .set = usbs_set, -}; - -/* - * SPI clock - */ -static void spi_set(struct clk *clk, int enable) -{ - u32 mask; - - if (BCMCPU_IS_6338()) - mask = CKCTL_6338_SPI_EN; - else if (BCMCPU_IS_6348()) - mask = CKCTL_6348_SPI_EN; - else - /* BCMCPU_IS_6358 */ - mask = CKCTL_6358_SPI_EN; - bcm_hwclock_set(mask, enable); -} - -static struct clk clk_spi = { - .set = spi_set, -}; - -/* - * Internal peripheral clock - */ -static struct clk clk_periph = { - .rate = (50 * 1000 * 1000), -}; - - -/* - * Linux clock API implementation - */ -int clk_enable(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - clk_enable_unlocked(clk); - mutex_unlock(&clocks_mutex); - return 0; -} - -EXPORT_SYMBOL(clk_enable); - -void clk_disable(struct clk *clk) -{ - mutex_lock(&clocks_mutex); - clk_disable_unlocked(clk); - mutex_unlock(&clocks_mutex); -} - -EXPORT_SYMBOL(clk_disable); - -unsigned long clk_get_rate(struct clk *clk) -{ - return clk->rate; -} - -EXPORT_SYMBOL(clk_get_rate); - -struct clk *clk_get(struct device *dev, const char *id) -{ - if (!strcmp(id, "enet0")) - return &clk_enet0; - if (!strcmp(id, "enet1")) - return &clk_enet1; - if (!strcmp(id, "ephy")) - return &clk_ephy; - if (!strcmp(id, "usbh")) - return &clk_usbh; - if (!strcmp(id, "usbs")) - return &clk_usbs; - if (!strcmp(id, "spi")) - return &clk_spi; - if (!strcmp(id, "periph")) - return &clk_periph; - if (BCMCPU_IS_6358() && !strcmp(id, "pcm")) - return &clk_pcm; - return ERR_PTR(-ENOENT); -} - -EXPORT_SYMBOL(clk_get); - -void clk_put(struct clk *clk) -{ -} - -EXPORT_SYMBOL(clk_put); diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cpu.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cpu.c deleted file mode 100644 index 00da28286a..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cpu.c +++ /dev/null @@ -1,398 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * 2009 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/cpu.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> -#include <bcm63xx_irq.h> - -const unsigned long *bcm63xx_regs_base; -EXPORT_SYMBOL(bcm63xx_regs_base); - -const int *bcm63xx_irqs; -EXPORT_SYMBOL(bcm63xx_irqs); - -const unsigned long *bcm63xx_regs_spi; -EXPORT_SYMBOL(bcm63xx_regs_spi); - -static u16 bcm63xx_cpu_id; -static u16 bcm63xx_cpu_rev; -static unsigned int bcm63xx_cpu_freq; -static unsigned int bcm63xx_memory_size; - -/* - * 6338 register sets and irqs - */ - -static const unsigned long bcm96338_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6338_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6338_PERF_BASE, - [RSET_TIMER] = BCM_6338_TIMER_BASE, - [RSET_WDT] = BCM_6338_WDT_BASE, - [RSET_UART0] = BCM_6338_UART0_BASE, - [RSET_GPIO] = BCM_6338_GPIO_BASE, - [RSET_SPI] = BCM_6338_SPI_BASE, - [RSET_OHCI0] = BCM_6338_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6338_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6338_USBH_PRIV_BASE, - [RSET_UDC0] = BCM_6338_UDC0_BASE, - [RSET_MPI] = BCM_6338_MPI_BASE, - [RSET_PCMCIA] = BCM_6338_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6338_SDRAM_BASE, - [RSET_DSL] = BCM_6338_DSL_BASE, - [RSET_ENET0] = BCM_6338_ENET0_BASE, - [RSET_ENET1] = BCM_6338_ENET1_BASE, - [RSET_ENETDMA] = BCM_6338_ENETDMA_BASE, - [RSET_MEMC] = BCM_6338_MEMC_BASE, - [RSET_DDR] = BCM_6338_DDR_BASE, -}; - -static const int bcm96338_irqs[] = { - [IRQ_TIMER] = BCM_6338_TIMER_IRQ, - [IRQ_SPI] = BCM_6338_SPI_IRQ, - [IRQ_UART0] = BCM_6338_UART0_IRQ, - [IRQ_DSL] = BCM_6338_DSL_IRQ, - [IRQ_UDC0] = BCM_6338_UDC0_IRQ, - [IRQ_ENET0] = BCM_6338_ENET0_IRQ, - [IRQ_ENET_PHY] = BCM_6338_ENET_PHY_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6338_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6338_ENET0_TXDMA_IRQ, -}; - -static const unsigned long bcm96338_regs_spi[] = { - [SPI_CMD] = SPI_BCM_6338_SPI_CMD, - [SPI_INT_STATUS] = SPI_BCM_6338_SPI_INT_STATUS, - [SPI_INT_MASK_ST] = SPI_BCM_6338_SPI_MASK_INT_ST, - [SPI_INT_MASK] = SPI_BCM_6338_SPI_INT_MASK, - [SPI_ST] = SPI_BCM_6338_SPI_ST, - [SPI_CLK_CFG] = SPI_BCM_6338_SPI_CLK_CFG, - [SPI_FILL_BYTE] = SPI_BCM_6338_SPI_FILL_BYTE, - [SPI_MSG_TAIL] = SPI_BCM_6338_SPI_MSG_TAIL, - [SPI_RX_TAIL] = SPI_BCM_6338_SPI_RX_TAIL, - [SPI_MSG_CTL] = SPI_BCM_6338_SPI_MSG_CTL, - [SPI_MSG_DATA] = SPI_BCM_6338_SPI_MSG_DATA, - [SPI_RX_DATA] = SPI_BCM_6338_SPI_RX_DATA, -}; - -/* - * 6345 register sets and irqs - */ - -static const unsigned long bcm96345_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6345_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6345_PERF_BASE, - [RSET_TIMER] = BCM_6345_TIMER_BASE, - [RSET_WDT] = BCM_6345_WDT_BASE, - [RSET_UART0] = BCM_6345_UART0_BASE, - [RSET_GPIO] = BCM_6345_GPIO_BASE, - [RSET_SPI] = BCM_6345_SPI_BASE, - [RSET_UDC0] = BCM_6345_UDC0_BASE, - [RSET_OHCI0] = BCM_6345_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6345_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6345_USBH_PRIV_BASE, - [RSET_MPI] = BCM_6345_MPI_BASE, - [RSET_PCMCIA] = BCM_6345_PCMCIA_BASE, - [RSET_DSL] = BCM_6345_DSL_BASE, - [RSET_ENET0] = BCM_6345_ENET0_BASE, - [RSET_ENET1] = BCM_6345_ENET1_BASE, - [RSET_ENETDMA] = BCM_6345_ENETDMA_BASE, - [RSET_EHCI0] = BCM_6345_EHCI0_BASE, - [RSET_SDRAM] = BCM_6345_SDRAM_BASE, - [RSET_MEMC] = BCM_6345_MEMC_BASE, - [RSET_DDR] = BCM_6345_DDR_BASE, -}; - -static const int bcm96345_irqs[] = { - [IRQ_TIMER] = BCM_6345_TIMER_IRQ, - [IRQ_UART0] = BCM_6345_UART0_IRQ, - [IRQ_DSL] = BCM_6345_DSL_IRQ, - [IRQ_UDC0] = BCM_6345_UDC0_IRQ, - [IRQ_ENET0] = BCM_6345_ENET0_IRQ, - [IRQ_ENET_PHY] = BCM_6345_ENET_PHY_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6345_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6345_ENET0_TXDMA_IRQ, -}; - -/* - * 6348 register sets and irqs - */ -static const unsigned long bcm96348_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6348_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6348_PERF_BASE, - [RSET_TIMER] = BCM_6348_TIMER_BASE, - [RSET_WDT] = BCM_6348_WDT_BASE, - [RSET_UART0] = BCM_6348_UART0_BASE, - [RSET_GPIO] = BCM_6348_GPIO_BASE, - [RSET_SPI] = BCM_6348_SPI_BASE, - [RSET_OHCI0] = BCM_6348_OHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6348_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6348_USBH_PRIV_BASE, - [RSET_UDC0] = BCM_6348_UDC0_BASE, - [RSET_MPI] = BCM_6348_MPI_BASE, - [RSET_PCMCIA] = BCM_6348_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6348_SDRAM_BASE, - [RSET_DSL] = BCM_6348_DSL_BASE, - [RSET_ENET0] = BCM_6348_ENET0_BASE, - [RSET_ENET1] = BCM_6348_ENET1_BASE, - [RSET_ENETDMA] = BCM_6348_ENETDMA_BASE, - [RSET_MEMC] = BCM_6348_MEMC_BASE, - [RSET_DDR] = BCM_6348_DDR_BASE, -}; - -static const int bcm96348_irqs[] = { - [IRQ_TIMER] = BCM_6348_TIMER_IRQ, - [IRQ_SPI] = BCM_6348_SPI_IRQ, - [IRQ_UART0] = BCM_6348_UART0_IRQ, - [IRQ_DSL] = BCM_6348_DSL_IRQ, - [IRQ_UDC0] = BCM_6348_UDC0_IRQ, - [IRQ_ENET0] = BCM_6348_ENET0_IRQ, - [IRQ_ENET1] = BCM_6348_ENET1_IRQ, - [IRQ_ENET_PHY] = BCM_6348_ENET_PHY_IRQ, - [IRQ_OHCI0] = BCM_6348_OHCI0_IRQ, - [IRQ_PCMCIA] = BCM_6348_PCMCIA_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6348_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6348_ENET0_TXDMA_IRQ, - [IRQ_ENET1_RXDMA] = BCM_6348_ENET1_RXDMA_IRQ, - [IRQ_ENET1_TXDMA] = BCM_6348_ENET1_TXDMA_IRQ, - [IRQ_PCI] = BCM_6348_PCI_IRQ, -}; - -static const unsigned long bcm96348_regs_spi[] = { - [SPI_CMD] = SPI_BCM_6348_SPI_CMD, - [SPI_INT_STATUS] = SPI_BCM_6348_SPI_INT_STATUS, - [SPI_INT_MASK_ST] = SPI_BCM_6348_SPI_MASK_INT_ST, - [SPI_INT_MASK] = SPI_BCM_6348_SPI_INT_MASK, - [SPI_ST] = SPI_BCM_6348_SPI_ST, - [SPI_CLK_CFG] = SPI_BCM_6348_SPI_CLK_CFG, - [SPI_FILL_BYTE] = SPI_BCM_6348_SPI_FILL_BYTE, - [SPI_MSG_TAIL] = SPI_BCM_6348_SPI_MSG_TAIL, - [SPI_RX_TAIL] = SPI_BCM_6348_SPI_RX_TAIL, - [SPI_MSG_CTL] = SPI_BCM_6348_SPI_MSG_CTL, - [SPI_MSG_DATA] = SPI_BCM_6348_SPI_MSG_DATA, - [SPI_RX_DATA] = SPI_BCM_6348_SPI_RX_DATA, -}; - -/* - * 6358 register sets and irqs - */ -static const unsigned long bcm96358_regs_base[] = { - [RSET_DSL_LMEM] = BCM_6358_DSL_LMEM_BASE, - [RSET_PERF] = BCM_6358_PERF_BASE, - [RSET_TIMER] = BCM_6358_TIMER_BASE, - [RSET_WDT] = BCM_6358_WDT_BASE, - [RSET_UART0] = BCM_6358_UART0_BASE, - [RSET_GPIO] = BCM_6358_GPIO_BASE, - [RSET_SPI] = BCM_6358_SPI_BASE, - [RSET_OHCI0] = BCM_6358_OHCI0_BASE, - [RSET_EHCI0] = BCM_6358_EHCI0_BASE, - [RSET_OHCI_PRIV] = BCM_6358_OHCI_PRIV_BASE, - [RSET_USBH_PRIV] = BCM_6358_USBH_PRIV_BASE, - [RSET_MPI] = BCM_6358_MPI_BASE, - [RSET_PCMCIA] = BCM_6358_PCMCIA_BASE, - [RSET_SDRAM] = BCM_6358_SDRAM_BASE, - [RSET_DSL] = BCM_6358_DSL_BASE, - [RSET_ENET0] = BCM_6358_ENET0_BASE, - [RSET_ENET1] = BCM_6358_ENET1_BASE, - [RSET_ENETDMA] = BCM_6358_ENETDMA_BASE, - [RSET_MEMC] = BCM_6358_MEMC_BASE, - [RSET_DDR] = BCM_6358_DDR_BASE, -}; - -static const int bcm96358_irqs[] = { - [IRQ_TIMER] = BCM_6358_TIMER_IRQ, - [IRQ_SPI] = BCM_6358_SPI_IRQ, - [IRQ_UART0] = BCM_6358_UART0_IRQ, - [IRQ_DSL] = BCM_6358_DSL_IRQ, - [IRQ_ENET0] = BCM_6358_ENET0_IRQ, - [IRQ_ENET1] = BCM_6358_ENET1_IRQ, - [IRQ_ENET_PHY] = BCM_6358_ENET_PHY_IRQ, - [IRQ_OHCI0] = BCM_6358_OHCI0_IRQ, - [IRQ_EHCI0] = BCM_6358_EHCI0_IRQ, - [IRQ_PCMCIA] = BCM_6358_PCMCIA_IRQ, - [IRQ_ENET0_RXDMA] = BCM_6358_ENET0_RXDMA_IRQ, - [IRQ_ENET0_TXDMA] = BCM_6358_ENET0_TXDMA_IRQ, - [IRQ_ENET1_RXDMA] = BCM_6358_ENET1_RXDMA_IRQ, - [IRQ_ENET1_TXDMA] = BCM_6358_ENET1_TXDMA_IRQ, - [IRQ_PCI] = BCM_6358_PCI_IRQ, -}; - -static const unsigned long bcm96358_regs_spi[] = { - [SPI_CMD] = SPI_BCM_6358_SPI_CMD, - [SPI_INT_STATUS] = SPI_BCM_6358_SPI_INT_STATUS, - [SPI_INT_MASK_ST] = SPI_BCM_6358_SPI_MASK_INT_ST, - [SPI_INT_MASK] = SPI_BCM_6358_SPI_INT_MASK, - [SPI_ST] = SPI_BCM_6358_SPI_STATUS, - [SPI_CLK_CFG] = SPI_BCM_6358_SPI_CLK_CFG, - [SPI_FILL_BYTE] = SPI_BCM_6358_SPI_FILL_BYTE, - [SPI_MSG_TAIL] = SPI_BCM_6358_SPI_MSG_TAIL, - [SPI_RX_TAIL] = SPI_BCM_6358_SPI_RX_TAIL, - [SPI_MSG_CTL] = SPI_BCM_6358_MSG_CTL, - [SPI_MSG_DATA] = SPI_BCM_6358_SPI_MSG_DATA, - [SPI_RX_DATA] = SPI_BCM_6358_SPI_RX_DATA, -}; - -u16 __bcm63xx_get_cpu_id(void) -{ - return bcm63xx_cpu_id; -} - -EXPORT_SYMBOL(__bcm63xx_get_cpu_id); - -u16 bcm63xx_get_cpu_rev(void) -{ - return bcm63xx_cpu_rev; -} - -EXPORT_SYMBOL(bcm63xx_get_cpu_rev); - -unsigned int bcm63xx_get_cpu_freq(void) -{ - return bcm63xx_cpu_freq; -} - -unsigned int bcm63xx_get_memory_size(void) -{ - return bcm63xx_memory_size; -} - -static unsigned int detect_cpu_clock(void) -{ - unsigned int tmp, n1 = 0, n2 = 0, m1 = 0; - - if (BCMCPU_IS_6338()) - return 240000000; - - if (BCMCPU_IS_6345()) - return 140000000; - - /* - * frequency depends on PLL configuration: - */ - if (BCMCPU_IS_6348()) { - /* 16MHz * (N1 + 1) * (N2 + 2) / (M1_CPU + 1) */ - tmp = bcm_perf_readl(PERF_MIPSPLLCTL_REG); - n1 = (tmp & MIPSPLLCTL_N1_MASK) >> MIPSPLLCTL_N1_SHIFT; - n2 = (tmp & MIPSPLLCTL_N2_MASK) >> MIPSPLLCTL_N2_SHIFT; - m1 = (tmp & MIPSPLLCTL_M1CPU_MASK) >> MIPSPLLCTL_M1CPU_SHIFT; - n1 += 1; - n2 += 2; - m1 += 1; - } - - if (BCMCPU_IS_6358()) { - /* 16MHz * N1 * N2 / M1_CPU */ - tmp = bcm_ddr_readl(DDR_DMIPSPLLCFG_REG); - n1 = (tmp & DMIPSPLLCFG_N1_MASK) >> DMIPSPLLCFG_N1_SHIFT; - n2 = (tmp & DMIPSPLLCFG_N2_MASK) >> DMIPSPLLCFG_N2_SHIFT; - m1 = (tmp & DMIPSPLLCFG_M1_MASK) >> DMIPSPLLCFG_M1_SHIFT; - } - - return (16 * 1000000 * n1 * n2) / m1; -} - -/* - * attempt to detect the amount of memory installed - */ -static unsigned int detect_memory_size(void) -{ - unsigned int cols = 0, rows = 0, is_32bits = 0, banks = 0; - u32 val; - - if (BCMCPU_IS_6345()) - return (8 * 1024 * 1024); - - if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) { - val = bcm_sdram_readl(SDRAM_CFG_REG); - rows = (val & SDRAM_CFG_ROW_MASK) >> SDRAM_CFG_ROW_SHIFT; - cols = (val & SDRAM_CFG_COL_MASK) >> SDRAM_CFG_COL_SHIFT; - is_32bits = (val & SDRAM_CFG_32B_MASK) ? 1 : 0; - banks = (val & SDRAM_CFG_BANK_MASK) ? 2 : 1; - } - - if (BCMCPU_IS_6358()) { - val = bcm_memc_readl(MEMC_CFG_REG); - rows = (val & MEMC_CFG_ROW_MASK) >> MEMC_CFG_ROW_SHIFT; - cols = (val & MEMC_CFG_COL_MASK) >> MEMC_CFG_COL_SHIFT; - is_32bits = (val & MEMC_CFG_32B_MASK) ? 0 : 1; - banks = 2; - } - - /* 0 => 11 address bits ... 2 => 13 address bits */ - rows += 11; - - /* 0 => 8 address bits ... 2 => 10 address bits */ - cols += 8; - - return 1 << (cols + rows + (is_32bits + 1) + banks); -} - -void __init bcm63xx_cpu_init(void) -{ - unsigned int tmp, expected_cpu_id; - struct cpuinfo_mips *c = ¤t_cpu_data; - - /* soc registers location depends on cpu type */ - expected_cpu_id = 0; - - switch (c->cputype) { - case CPU_BCM3302: - expected_cpu_id = BCM6338_CPU_ID; - bcm63xx_regs_base = bcm96338_regs_base; - bcm63xx_irqs = bcm96338_irqs; - bcm63xx_regs_spi = bcm96338_regs_spi; - break; - case CPU_BCM6345: - expected_cpu_id = BCM6345_CPU_ID; - bcm63xx_regs_base = bcm96345_regs_base; - bcm63xx_irqs = bcm96345_irqs; - break; - case CPU_BCM6348: - expected_cpu_id = BCM6348_CPU_ID; - bcm63xx_regs_base = bcm96348_regs_base; - bcm63xx_irqs = bcm96348_irqs; - bcm63xx_regs_spi = bcm96348_regs_spi; - break; - case CPU_BCM6358: - expected_cpu_id = BCM6358_CPU_ID; - bcm63xx_regs_base = bcm96358_regs_base; - bcm63xx_irqs = bcm96358_irqs; - bcm63xx_regs_spi = bcm96358_regs_spi; - break; - } - - /* really early to panic, but delaying panic would not help - * since we will never get any working console */ - if (!expected_cpu_id) - panic("unsupported Broadcom CPU"); - - /* - * bcm63xx_regs_base is set, we can access soc registers - */ - - /* double check CPU type */ - tmp = bcm_perf_readl(PERF_REV_REG); - bcm63xx_cpu_id = (tmp & REV_CHIPID_MASK) >> REV_CHIPID_SHIFT; - bcm63xx_cpu_rev = (tmp & REV_REVID_MASK) >> REV_REVID_SHIFT; - - if (bcm63xx_cpu_id != expected_cpu_id) - panic("bcm63xx CPU id mismatch"); - - bcm63xx_cpu_freq = detect_cpu_clock(); - bcm63xx_memory_size = detect_memory_size(); - - printk(KERN_INFO "Detected Broadcom 0x%04x CPU revision %02x\n", - bcm63xx_cpu_id, bcm63xx_cpu_rev); - printk(KERN_INFO "CPU frequency is %u Hz\n", - bcm63xx_cpu_freq); - printk(KERN_INFO "%uMB of RAM installed\n", - bcm63xx_memory_size >> 20); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cs.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cs.c deleted file mode 100644 index 50d8190bbf..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/cs.c +++ /dev/null @@ -1,144 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/log2.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_cs.h> - -static DEFINE_SPINLOCK(bcm63xx_cs_lock); - -/* - * check if given chip select exists - */ -static int is_valid_cs(unsigned int cs) -{ - if (cs > 6) - return 0; - return 1; -} - -/* - * Configure chipselect base address and size (bytes). - * Size must be a power of two between 8k and 256M. - */ -int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size) -{ - unsigned long flags; - u32 val; - - if (!is_valid_cs(cs)) - return -EINVAL; - - /* sanity check on size */ - if (size != roundup_pow_of_two(size)) - return -EINVAL; - - if (size < 8 * 1024 || size > 256 * 1024 * 1024) - return -EINVAL; - - val = (base & MPI_CSBASE_BASE_MASK); - /* 8k => 0 - 256M => 15 */ - val |= (ilog2(size) - ilog2(8 * 1024)) << MPI_CSBASE_SIZE_SHIFT; - - spin_lock_irqsave(&bcm63xx_cs_lock, flags); - bcm_mpi_writel(val, MPI_CSBASE_REG(cs)); - spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(bcm63xx_set_cs_base); - -/* - * configure chipselect timing (ns) - */ -int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, - unsigned int setup, unsigned int hold) -{ - unsigned long flags; - u32 val; - - if (!is_valid_cs(cs)) - return -EINVAL; - - spin_lock_irqsave(&bcm63xx_cs_lock, flags); - val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); - val &= ~(MPI_CSCTL_WAIT_MASK); - val &= ~(MPI_CSCTL_SETUP_MASK); - val &= ~(MPI_CSCTL_HOLD_MASK); - val |= wait << MPI_CSCTL_WAIT_SHIFT; - val |= setup << MPI_CSCTL_SETUP_SHIFT; - val |= hold << MPI_CSCTL_HOLD_SHIFT; - bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); - spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(bcm63xx_set_cs_timing); - -/* - * configure other chipselect parameter (data bus size, ...) - */ -int bcm63xx_set_cs_param(unsigned int cs, u32 params) -{ - unsigned long flags; - u32 val; - - if (!is_valid_cs(cs)) - return -EINVAL; - - /* none of this fields apply to pcmcia */ - if (cs == MPI_CS_PCMCIA_COMMON || - cs == MPI_CS_PCMCIA_ATTR || - cs == MPI_CS_PCMCIA_IO) - return -EINVAL; - - spin_lock_irqsave(&bcm63xx_cs_lock, flags); - val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); - val &= ~(MPI_CSCTL_DATA16_MASK); - val &= ~(MPI_CSCTL_SYNCMODE_MASK); - val &= ~(MPI_CSCTL_TSIZE_MASK); - val &= ~(MPI_CSCTL_ENDIANSWAP_MASK); - val |= params; - bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); - spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); - - return 0; -} - -EXPORT_SYMBOL(bcm63xx_set_cs_param); - -/* - * set cs status (enable/disable) - */ -int bcm63xx_set_cs_status(unsigned int cs, int enable) -{ - unsigned long flags; - u32 val; - - if (!is_valid_cs(cs)) - return -EINVAL; - - spin_lock_irqsave(&bcm63xx_cs_lock, flags); - val = bcm_mpi_readl(MPI_CSCTL_REG(cs)); - if (enable) - val |= MPI_CSCTL_ENABLE_MASK; - else - val &= ~MPI_CSCTL_ENABLE_MASK; - bcm_mpi_writel(val, MPI_CSCTL_REG(cs)); - spin_unlock_irqrestore(&bcm63xx_cs_lock, flags); - return 0; -} - -EXPORT_SYMBOL(bcm63xx_set_cs_status); diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-dsp.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-dsp.c deleted file mode 100644 index 08a2f75c2a..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-dsp.c +++ /dev/null @@ -1,56 +0,0 @@ -/* - * Broadcom BCM63xx VoIP DSP registration - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_dsp.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -static struct resource voip_dsp_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bcm63xx_voip_dsp_device = { - .name = "bcm63xx-voip-dsp", - .id = 0, - .num_resources = ARRAY_SIZE(voip_dsp_resources), - .resource = voip_dsp_resources, -}; - -int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd) -{ - struct bcm63xx_dsp_platform_data *dpd; - u32 val; - - /* Get the memory window */ - val = bcm_mpi_readl(MPI_CSBASE_REG(pd->cs - 1)); - val &= MPI_CSBASE_BASE_MASK; - voip_dsp_resources[0].start = val; - voip_dsp_resources[0].end = val + 0xFFFFFFF; - voip_dsp_resources[1].start = pd->ext_irq; - - /* copy given platform data */ - dpd = bcm63xx_voip_dsp_device.dev.platform_data; - memcpy(dpd, pd, sizeof (*pd)); - - return platform_device_register(&bcm63xx_voip_dsp_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-enet.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-enet.c deleted file mode 100644 index aeb1b934f5..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-enet.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_dev_enet.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> - -static struct resource shared_res[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bcm63xx_enet_shared_device = { - .name = "bcm63xx_enet_shared", - .id = 0, - .num_resources = ARRAY_SIZE(shared_res), - .resource = shared_res, -}; - -static int shared_device_registered = 0; - -static struct resource enet0_res[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, - { - .start = -1, /* filled at runtime */ - .start = IRQ_ENET0_RXDMA, - .flags = IORESOURCE_IRQ, - }, - { - .start = -1, /* filled at runtime */ - .start = IRQ_ENET0_TXDMA, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct bcm63xx_enet_platform_data enet0_pd; - -static struct platform_device bcm63xx_enet0_device = { - .name = "bcm63xx_enet", - .id = 0, - .num_resources = ARRAY_SIZE(enet0_res), - .resource = enet0_res, - .dev = { - .platform_data = &enet0_pd, - }, -}; - -static struct resource enet1_res[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct bcm63xx_enet_platform_data enet1_pd; - -static struct platform_device bcm63xx_enet1_device = { - .name = "bcm63xx_enet", - .id = 1, - .num_resources = ARRAY_SIZE(enet1_res), - .resource = enet1_res, - .dev = { - .platform_data = &enet1_pd, - }, -}; - -int __init bcm63xx_enet_register(int unit, - const struct bcm63xx_enet_platform_data *pd) -{ - struct platform_device *pdev; - struct bcm63xx_enet_platform_data *dpd; - int ret; - - if (unit > 1) - return -ENODEV; - - if (!shared_device_registered) { - shared_res[0].start = bcm63xx_regset_address(RSET_ENETDMA); - shared_res[0].end = shared_res[0].start; - if (BCMCPU_IS_6338()) - shared_res[0].end += (RSET_ENETDMA_SIZE / 2) - 1; - else - shared_res[0].end += (RSET_ENETDMA_SIZE) - 1; - - ret = platform_device_register(&bcm63xx_enet_shared_device); - if (ret) - return ret; - shared_device_registered = 1; - } - - if (unit == 0) { - enet0_res[0].start = bcm63xx_regset_address(RSET_ENET0); - enet0_res[0].end = enet0_res[0].start; - enet0_res[0].end += RSET_ENET_SIZE - 1; - enet0_res[1].start = bcm63xx_get_irq_number(IRQ_ENET0); - enet0_res[2].start = bcm63xx_get_irq_number(IRQ_ENET0_RXDMA); - enet0_res[3].start = bcm63xx_get_irq_number(IRQ_ENET0_TXDMA); - pdev = &bcm63xx_enet0_device; - } else { - enet1_res[0].start = bcm63xx_regset_address(RSET_ENET1); - enet1_res[0].end = enet1_res[0].start; - enet1_res[0].end += RSET_ENET_SIZE - 1; - enet1_res[1].start = bcm63xx_get_irq_number(IRQ_ENET1); - enet1_res[2].start = bcm63xx_get_irq_number(IRQ_ENET1_RXDMA); - enet1_res[3].start = bcm63xx_get_irq_number(IRQ_ENET1_TXDMA); - pdev = &bcm63xx_enet1_device; - } - - /* copy given platform data */ - dpd = pdev->dev.platform_data; - memcpy(dpd, pd, sizeof (*pd)); - - /* adjust them in case internal phy is used */ - if (dpd->use_internal_phy) { - - /* internal phy only exists for enet0 */ - if (unit == 1) - return -ENODEV; - - dpd->phy_id = 1; - dpd->has_phy_interrupt = 1; - dpd->phy_interrupt = bcm63xx_get_irq_number(IRQ_ENET_PHY); - } - - ret = platform_device_register(pdev); - if (ret) - return ret; - return 0; -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-pcmcia.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-pcmcia.c deleted file mode 100644 index 6bb911ca40..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-pcmcia.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <asm/bootinfo.h> -#include <linux/platform_device.h> -#include <bcm63xx_cs.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_pcmcia.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> - -static struct resource pcmcia_resources[] = { - /* pcmcia registers */ - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - - /* pcmcia memory zone resources */ - { - .start = BCM_PCMCIA_COMMON_BASE_PA, - .end = BCM_PCMCIA_COMMON_END_PA, - .flags = IORESOURCE_MEM, - }, - { - .start = BCM_PCMCIA_ATTR_BASE_PA, - .end = BCM_PCMCIA_ATTR_END_PA, - .flags = IORESOURCE_MEM, - }, - { - .start = BCM_PCMCIA_IO_BASE_PA, - .end = BCM_PCMCIA_IO_END_PA, - .flags = IORESOURCE_MEM, - }, - - /* PCMCIA irq */ - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, - - /* declare PCMCIA IO resource also */ - { - .start = BCM_PCMCIA_IO_BASE_PA, - .end = BCM_PCMCIA_IO_END_PA, - .flags = IORESOURCE_IO, - }, -}; - -static struct bcm63xx_pcmcia_platform_data pd; - -static struct platform_device bcm63xx_pcmcia_device = { - .name = "bcm63xx_pcmcia", - .id = 0, - .num_resources = ARRAY_SIZE(pcmcia_resources), - .resource = pcmcia_resources, - .dev = { - .platform_data = &pd, - }, -}; - -static int __init config_pcmcia_cs(unsigned int cs, - u32 base, unsigned int size) -{ - int ret; - - ret = bcm63xx_set_cs_status(cs, 0); - if (!ret) - ret = bcm63xx_set_cs_base(cs, base, size); - if (!ret) - ret = bcm63xx_set_cs_status(cs, 1); - return ret; -} - -static const __initdata unsigned int pcmcia_cs[3][3] = { - /* cs, base address, size */ - { MPI_CS_PCMCIA_COMMON, BCM_PCMCIA_COMMON_BASE_PA, - BCM_PCMCIA_COMMON_SIZE }, - - { MPI_CS_PCMCIA_ATTR, BCM_PCMCIA_ATTR_BASE_PA, - BCM_PCMCIA_ATTR_SIZE }, - - { MPI_CS_PCMCIA_IO, BCM_PCMCIA_IO_BASE_PA, - BCM_PCMCIA_IO_SIZE }, -}; - -int __init bcm63xx_pcmcia_register(void) -{ - int ret, i; - - if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) - return 0; - - /* use correct pcmcia ready gpio depending on processor */ - switch (bcm63xx_get_cpu_id()) { - case BCM6348_CPU_ID: - pd.ready_gpio = 22; - break; - - case BCM6358_CPU_ID: - pd.ready_gpio = 18; - break; - - default: - return -ENODEV; - } - - pcmcia_resources[0].start = bcm63xx_regset_address(RSET_PCMCIA); - pcmcia_resources[0].end = pcmcia_resources[0].start; - pcmcia_resources[0].end += RSET_PCMCIA_SIZE - 1; - pcmcia_resources[4].start = bcm63xx_get_irq_number(IRQ_PCMCIA); - - /* configure pcmcia chip selects */ - for (i = 0; i < 3; i++) { - ret = config_pcmcia_cs(pcmcia_cs[i][0], - pcmcia_cs[i][1], - pcmcia_cs[i][2]); - if (ret) - goto out_err; - } - - return platform_device_register(&bcm63xx_pcmcia_device); - -out_err: - printk(KERN_ERR "unable to set pcmcia chip select"); - return ret; -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-spi.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-spi.c deleted file mode 100644 index 1ba4aded3a..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-spi.c +++ /dev/null @@ -1,60 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_spi.h> -#include <bcm63xx_regs.h> - -static struct resource spi_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct bcm63xx_spi_pdata spi_pdata = { - .bus_num = 0, - .num_chipselect = 4, - .speed_hz = 50000000, /* Fclk */ -}; - -static struct platform_device bcm63xx_spi_device = { - .name = "bcm63xx-spi", - .id = 0, - .num_resources = ARRAY_SIZE(spi_resources), - .resource = spi_resources, - .dev = { - .platform_data = &spi_pdata, - }, -}; - -int __init bcm63xx_spi_register(void) -{ - spi_resources[0].start = bcm63xx_regset_address(RSET_SPI); - spi_resources[0].end = spi_resources[0].start; - spi_resources[0].end += RSET_SPI_SIZE - 1; - spi_resources[1].start = bcm63xx_get_irq_number(IRQ_SPI); - - /* Fill in platform data */ - if (BCMCPU_IS_6338() || BCMCPU_IS_6348()) - spi_pdata.fifo_size = SPI_BCM_6338_SPI_MSG_DATA_SIZE; - - if (BCMCPU_IS_6358()) - spi_pdata.fifo_size = SPI_BCM_6358_SPI_MSG_DATA_SIZE; - - return platform_device_register(&bcm63xx_spi_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-uart.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-uart.c deleted file mode 100644 index 5f3d89c4a9..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-uart.c +++ /dev/null @@ -1,41 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_uart.h> - -static struct resource uart_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bcm63xx_uart_device = { - .name = "bcm63xx_uart", - .id = 0, - .num_resources = ARRAY_SIZE(uart_resources), - .resource = uart_resources, -}; - -int __init bcm63xx_uart_register(void) -{ - uart_resources[0].start = bcm63xx_regset_address(RSET_UART0); - uart_resources[0].end = uart_resources[0].start; - uart_resources[0].end += RSET_UART_SIZE - 1; - uart_resources[1].start = bcm63xx_get_irq_number(IRQ_UART0); - return platform_device_register(&bcm63xx_uart_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ehci.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ehci.c deleted file mode 100644 index 7885405f78..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ehci.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_usb_ehci.h> - -static struct resource ehci_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ehci_dmamask = ~(u32)0; - -static struct platform_device bcm63xx_ehci_device = { - .name = "bcm63xx_ehci", - .id = 0, - .num_resources = ARRAY_SIZE(ehci_resources), - .resource = ehci_resources, - .dev = { - .dma_mask = &ehci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -int __init bcm63xx_ehci_register(void) -{ - if (!BCMCPU_IS_6358()) - return 0; - - ehci_resources[0].start = bcm63xx_regset_address(RSET_EHCI0); - ehci_resources[0].end = ehci_resources[0].start; - ehci_resources[0].end += RSET_EHCI_SIZE - 1; - ehci_resources[1].start = bcm63xx_get_irq_number(IRQ_EHCI0); - return platform_device_register(&bcm63xx_ehci_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ohci.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ohci.c deleted file mode 100644 index 377e67cf22..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-ohci.c +++ /dev/null @@ -1,50 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_dev_usb_ohci.h> - -static struct resource ohci_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 ohci_dmamask = ~(u32)0; - -static struct platform_device bcm63xx_ohci_device = { - .name = "bcm63xx_ohci", - .id = 0, - .num_resources = ARRAY_SIZE(ohci_resources), - .resource = ohci_resources, - .dev = { - .dma_mask = &ohci_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -int __init bcm63xx_ohci_register(void) -{ - if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) - return 0; - - ohci_resources[0].start = bcm63xx_regset_address(RSET_OHCI0); - ohci_resources[0].end = ohci_resources[0].start; - ohci_resources[0].end += RSET_OHCI_SIZE - 1; - ohci_resources[1].start = bcm63xx_get_irq_number(IRQ_OHCI0); - return platform_device_register(&bcm63xx_ohci_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-udc.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-udc.c deleted file mode 100644 index c5f1070c3b..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-usb-udc.c +++ /dev/null @@ -1,58 +0,0 @@ -/* - * Copyright (C) 2009 Henk Vergonet <Henk.Vergonet@gmail.com> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation; either version 2 of - * the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. - */ -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> - -static struct resource udc_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, - { - .start = -1, /* filled at runtime */ - .flags = IORESOURCE_IRQ, - }, -}; - -static u64 udc_dmamask = ~(u32)0; - -static struct platform_device bcm63xx_udc_device = { - .name = "bcm63xx-udc", - .id = 0, - .num_resources = ARRAY_SIZE(udc_resources), - .resource = udc_resources, - .dev = { - .dma_mask = &udc_dmamask, - .coherent_dma_mask = 0xffffffff, - }, -}; - -int __init bcm63xx_udc_register(void) -{ - if (!BCMCPU_IS_6338() && !BCMCPU_IS_6345() && !BCMCPU_IS_6348()) - return 0; - - udc_resources[0].start = bcm63xx_regset_address(RSET_UDC0); - udc_resources[0].end = udc_resources[0].start; - udc_resources[0].end += RSET_UDC_SIZE - 1; - udc_resources[1].start = bcm63xx_get_irq_number(IRQ_UDC0); - return platform_device_register(&bcm63xx_udc_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-wdt.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-wdt.c deleted file mode 100644 index 6e184891dc..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/dev-wdt.c +++ /dev/null @@ -1,36 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> - -static struct resource wdt_resources[] = { - { - .start = -1, /* filled at runtime */ - .end = -1, /* filled at runtime */ - .flags = IORESOURCE_MEM, - }, -}; - -static struct platform_device bcm63xx_wdt_device = { - .name = "bcm63xx-wdt", - .id = 0, - .num_resources = ARRAY_SIZE(wdt_resources), - .resource = wdt_resources, -}; - -int __init bcm63xx_wdt_register(void) -{ - wdt_resources[0].start = bcm63xx_regset_address(RSET_WDT); - wdt_resources[0].end = wdt_resources[0].start; - wdt_resources[0].end += RSET_WDT_SIZE - 1; - - return platform_device_register(&bcm63xx_wdt_device); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/early_printk.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/early_printk.c deleted file mode 100644 index bf353c937d..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/early_printk.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> - -static void __init wait_xfered(void) -{ - unsigned int val; - - /* wait for any previous char to be transmitted */ - do { - val = bcm_uart0_readl(UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - } while (1); -} - -void __init prom_putchar(char c) -{ - wait_xfered(); - bcm_uart0_writel(c, UART_FIFO_REG); - wait_xfered(); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/gpio.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/gpio.c deleted file mode 100644 index 53e46641a3..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/gpio.c +++ /dev/null @@ -1,131 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/platform_device.h> -#include <linux/gpio.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_gpio.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> - -static DEFINE_SPINLOCK(bcm63xx_gpio_lock); -static u32 gpio_out_low, gpio_out_high; - -static void bcm63xx_gpio_set(struct gpio_chip *chip, - unsigned gpio, int val) -{ - u32 reg; - u32 mask; - u32 *v; - unsigned long flags; - - if (gpio >= chip->ngpio) - BUG(); - - if (gpio < 32) { - reg = GPIO_DATA_LO_REG; - mask = 1 << gpio; - v = &gpio_out_low; - } else { - reg = GPIO_DATA_HI_REG; - mask = 1 << (gpio - 32); - v = &gpio_out_high; - } - - spin_lock_irqsave(&bcm63xx_gpio_lock, flags); - if (val) - *v |= mask; - else - *v &= ~mask; - bcm_gpio_writel(*v, reg); - spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); -} - -static int bcm63xx_gpio_get(struct gpio_chip *chip, unsigned gpio) -{ - u32 reg; - u32 mask; - - if (gpio >= chip->ngpio) - BUG(); - - if (gpio < 32) { - reg = GPIO_DATA_LO_REG; - mask = 1 << gpio; - } else { - reg = GPIO_DATA_HI_REG; - mask = 1 << (gpio - 32); - } - - return !!(bcm_gpio_readl(reg) & mask); -} - -static int bcm63xx_gpio_set_direction(struct gpio_chip *chip, - unsigned gpio, int dir) -{ - u32 reg; - u32 mask; - u32 tmp; - unsigned long flags; - - if (gpio >= chip->ngpio) - BUG(); - - if (gpio < 32) { - reg = GPIO_CTL_LO_REG; - mask = 1 << gpio; - } else { - reg = GPIO_CTL_HI_REG; - mask = 1 << (gpio - 32); - } - - spin_lock_irqsave(&bcm63xx_gpio_lock, flags); - tmp = bcm_gpio_readl(reg); - if (dir == GPIO_DIR_IN) - tmp &= ~mask; - else - tmp |= mask; - bcm_gpio_writel(tmp, reg); - spin_unlock_irqrestore(&bcm63xx_gpio_lock, flags); - - return 0; -} - -static int bcm63xx_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -{ - return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_IN); -} - -static int bcm63xx_gpio_direction_output(struct gpio_chip *chip, - unsigned gpio, int value) -{ - bcm63xx_gpio_set(chip, gpio, value); - return bcm63xx_gpio_set_direction(chip, gpio, GPIO_DIR_OUT); -} - - -static struct gpio_chip bcm63xx_gpio_chip = { - .label = "bcm63xx-gpio", - .direction_input = bcm63xx_gpio_direction_input, - .direction_output = bcm63xx_gpio_direction_output, - .get = bcm63xx_gpio_get, - .set = bcm63xx_gpio_set, - .base = 0, -}; - -int __init bcm63xx_gpio_init(void) -{ - bcm63xx_gpio_chip.ngpio = bcm63xx_gpio_count(); - printk(KERN_INFO "registering %d GPIOs\n", bcm63xx_gpio_chip.ngpio); - return gpiochip_add(&bcm63xx_gpio_chip); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/irq.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/irq.c deleted file mode 100644 index a0c5cd18c1..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/irq.c +++ /dev/null @@ -1,253 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * Copyright (C) 2008 Nicolas Schichan <nschichan@freebox.fr> - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/module.h> -#include <asm/irq_cpu.h> -#include <asm/mipsregs.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> -#include <bcm63xx_irq.h> - -/* - * dispatch internal devices IRQ (uart, enet, watchdog, ...). do not - * prioritize any interrupt relatively to another. the static counter - * will resume the loop where it ended the last time we left this - * function. - */ -static void bcm63xx_irq_dispatch_internal(void) -{ - u32 pending; - static int i; - - pending = bcm_perf_readl(PERF_IRQMASK_REG) & - bcm_perf_readl(PERF_IRQSTAT_REG); - - if (!pending) - return ; - - while (1) { - int to_call = i; - - i = (i + 1) & 0x1f; - if (pending & (1 << to_call)) { - do_IRQ(to_call + IRQ_INTERNAL_BASE); - break; - } - } -} - -asmlinkage void plat_irq_dispatch(void) -{ - u32 cause; - - do { - cause = read_c0_cause() & read_c0_status() & ST0_IM; - - if (!cause) - break; - - if (cause & CAUSEF_IP7) - do_IRQ(7); - if (cause & CAUSEF_IP2) - bcm63xx_irq_dispatch_internal(); - if (cause & CAUSEF_IP3) - do_IRQ(IRQ_EXT_0); - if (cause & CAUSEF_IP4) - do_IRQ(IRQ_EXT_1); - if (cause & CAUSEF_IP5) - do_IRQ(IRQ_EXT_2); - if (cause & CAUSEF_IP6) - do_IRQ(IRQ_EXT_3); - } while (1); -} - -/* - * internal IRQs operations: only mask/unmask on PERF irq mask - * register. - */ -static inline void bcm63xx_internal_irq_mask(unsigned int irq) -{ - u32 mask; - - irq -= IRQ_INTERNAL_BASE; - mask = bcm_perf_readl(PERF_IRQMASK_REG); - mask &= ~(1 << irq); - bcm_perf_writel(mask, PERF_IRQMASK_REG); -} - -static void bcm63xx_internal_irq_unmask(unsigned int irq) -{ - u32 mask; - - irq -= IRQ_INTERNAL_BASE; - mask = bcm_perf_readl(PERF_IRQMASK_REG); - mask |= (1 << irq); - bcm_perf_writel(mask, PERF_IRQMASK_REG); -} - -static unsigned int bcm63xx_internal_irq_startup(unsigned int irq) -{ - bcm63xx_internal_irq_unmask(irq); - return 0; -} - -/* - * external IRQs operations: mask/unmask and clear on PERF external - * irq control register. - */ -static void bcm63xx_external_irq_mask(unsigned int irq) -{ - u32 reg; - - irq -= IRQ_EXT_BASE; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg &= ~EXTIRQ_CFG_MASK(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); -} - -static void bcm63xx_external_irq_unmask(unsigned int irq) -{ - u32 reg; - - irq -= IRQ_EXT_BASE; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg |= EXTIRQ_CFG_MASK(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); -} - -static void bcm63xx_external_irq_clear(unsigned int irq) -{ - u32 reg; - - irq -= IRQ_EXT_BASE; - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg |= EXTIRQ_CFG_CLEAR(irq); - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); -} - -static unsigned int bcm63xx_external_irq_startup(unsigned int irq) -{ - set_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); - irq_enable_hazard(); - bcm63xx_external_irq_unmask(irq); - return 0; -} - -static void bcm63xx_external_irq_shutdown(unsigned int irq) -{ - bcm63xx_external_irq_mask(irq); - clear_c0_status(0x100 << (irq - IRQ_MIPS_BASE)); - irq_disable_hazard(); -} - -static int bcm63xx_external_irq_set_type(unsigned int irq, - unsigned int flow_type) -{ - u32 reg; - struct irq_desc *desc = irq_desc + irq; - - irq -= IRQ_EXT_BASE; - - flow_type &= IRQ_TYPE_SENSE_MASK; - - if (flow_type == IRQ_TYPE_NONE) - flow_type = IRQ_TYPE_LEVEL_LOW; - - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - switch (flow_type) { - case IRQ_TYPE_EDGE_BOTH: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_BOTHEDGE(irq); - break; - - case IRQ_TYPE_EDGE_RISING: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_SENSE(irq); - reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); - break; - - case IRQ_TYPE_EDGE_FALLING: - reg &= ~EXTIRQ_CFG_LEVELSENSE(irq); - reg &= ~EXTIRQ_CFG_SENSE(irq); - reg &= ~EXTIRQ_CFG_BOTHEDGE(irq); - break; - - case IRQ_TYPE_LEVEL_HIGH: - reg |= EXTIRQ_CFG_LEVELSENSE(irq); - reg |= EXTIRQ_CFG_SENSE(irq); - break; - - case IRQ_TYPE_LEVEL_LOW: - reg |= EXTIRQ_CFG_LEVELSENSE(irq); - reg &= ~EXTIRQ_CFG_SENSE(irq); - break; - - default: - printk(KERN_ERR "bogus flow type combination given !\n"); - return -EINVAL; - } - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); - - if (flow_type & (IRQ_TYPE_LEVEL_LOW | IRQ_TYPE_LEVEL_HIGH)) { - desc->status |= IRQ_LEVEL; - desc->handle_irq = handle_level_irq; - } else { - desc->handle_irq = handle_edge_irq; - } - - return 0; -} - -static struct irq_chip bcm63xx_internal_irq_chip = { - .name = "bcm63xx_ipic", - .startup = bcm63xx_internal_irq_startup, - .shutdown = bcm63xx_internal_irq_mask, - - .mask = bcm63xx_internal_irq_mask, - .mask_ack = bcm63xx_internal_irq_mask, - .unmask = bcm63xx_internal_irq_unmask, -}; - -static struct irq_chip bcm63xx_external_irq_chip = { - .name = "bcm63xx_epic", - .startup = bcm63xx_external_irq_startup, - .shutdown = bcm63xx_external_irq_shutdown, - - .ack = bcm63xx_external_irq_clear, - - .mask = bcm63xx_external_irq_mask, - .unmask = bcm63xx_external_irq_unmask, - - .set_type = bcm63xx_external_irq_set_type, -}; - -static struct irqaction cpu_ip2_cascade_action = { - .handler = no_action, - .name = "cascade_ip2", -}; - -void __init arch_init_irq(void) -{ - int i; - - mips_cpu_irq_init(); - for (i = IRQ_INTERNAL_BASE; i < NR_IRQS; ++i) - set_irq_chip_and_handler(i, &bcm63xx_internal_irq_chip, - handle_level_irq); - - for (i = IRQ_EXT_BASE; i < IRQ_EXT_BASE + 4; ++i) - set_irq_chip_and_handler(i, &bcm63xx_external_irq_chip, - handle_edge_irq); - - setup_irq(IRQ_MIPS_BASE + 2, &cpu_ip2_cascade_action); -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/prom.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/prom.c deleted file mode 100644 index fb284fbc58..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/prom.c +++ /dev/null @@ -1,55 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/bootmem.h> -#include <asm/bootinfo.h> -#include <bcm63xx_board.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_gpio.h> - -void __init prom_init(void) -{ - u32 reg, mask; - - bcm63xx_cpu_init(); - - /* stop any running watchdog */ - bcm_wdt_writel(WDT_STOP_1, WDT_CTL_REG); - bcm_wdt_writel(WDT_STOP_2, WDT_CTL_REG); - - /* disable all hardware blocks clock for now */ - if (BCMCPU_IS_6338()) - mask = CKCTL_6338_ALL_SAFE_EN; - else if (BCMCPU_IS_6345()) - mask = CKCTL_6345_ALL_SAFE_EN; - else if (BCMCPU_IS_6348()) - mask = CKCTL_6348_ALL_SAFE_EN; - else - /* BCMCPU_IS_6358() */ - mask = CKCTL_6358_ALL_SAFE_EN; - - reg = bcm_perf_readl(PERF_CKCTL_REG); - reg &= ~mask; - bcm_perf_writel(reg, PERF_CKCTL_REG); - - /* assign command line from kernel config */ - strcpy(arcs_cmdline, CONFIG_CMDLINE); - - /* register gpiochip */ - bcm63xx_gpio_init(); - - /* do low level board init */ - board_prom_init(); -} - -void __init prom_free_prom_memory(void) -{ -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c deleted file mode 100644 index 6d1ce6442e..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/setup.c +++ /dev/null @@ -1,124 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/delay.h> -#include <linux/bootmem.h> -#include <linux/ioport.h> -#include <linux/pm.h> -#include <asm/bootinfo.h> -#include <asm/time.h> -#include <asm/reboot.h> -#include <asm/cacheflush.h> -#include <bcm63xx_board.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -void bcm63xx_machine_halt(void) -{ - printk(KERN_INFO "System halted\n"); - while (1); -} - -static void bcm6348_a1_reboot(void) -{ - u32 reg; - - /* soft reset all blocks */ - printk(KERN_INFO "soft-reseting all blocks ...\n"); - reg = bcm_perf_readl(PERF_SOFTRESET_REG); - reg &= ~SOFTRESET_6348_ALL; - bcm_perf_writel(reg, PERF_SOFTRESET_REG); - mdelay(10); - - reg = bcm_perf_readl(PERF_SOFTRESET_REG); - reg |= SOFTRESET_6348_ALL; - bcm_perf_writel(reg, PERF_SOFTRESET_REG); - mdelay(10); - - /* Jump to the power on address. */ - printk(KERN_INFO "jumping to reset vector.\n"); - /* set high vectors (base at 0xbfc00000 */ - set_c0_status(ST0_BEV | ST0_ERL); - /* run uncached in kseg0 */ - change_c0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); - __flush_cache_all(); - /* remove all wired TLB entries */ - write_c0_wired(0); - __asm__ __volatile__( - "jr\t%0" - : - : "r" (0xbfc00000)); - while (1); -} - -void bcm63xx_machine_reboot(void) -{ - u32 reg; - - /* mask and clear all external irq */ - reg = bcm_perf_readl(PERF_EXTIRQ_CFG_REG); - reg &= ~EXTIRQ_CFG_MASK_ALL; - reg |= EXTIRQ_CFG_CLEAR_ALL; - bcm_perf_writel(reg, PERF_EXTIRQ_CFG_REG); - - if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() == 0xa1)) - bcm6348_a1_reboot(); - - printk(KERN_INFO "triggering watchdog soft-reset...\n"); - reg = bcm_perf_readl(PERF_SYS_PLL_CTL_REG); - reg |= SYS_PLL_SOFT_RESET; - bcm_perf_writel(reg, PERF_SYS_PLL_CTL_REG); - while (1); -} - -static void __bcm63xx_machine_reboot(char *p) -{ - bcm63xx_machine_reboot(); -} - -/* - * return system type in /proc/cpuinfo - */ -const char *get_system_type(void) -{ - static char buf[128]; - snprintf(buf, sizeof (buf), "bcm63xx/%s (0x%04x/0x%04X)", - board_get_name(), - bcm63xx_get_cpu_id(), bcm63xx_get_cpu_rev()); - return buf; -} - -void __init plat_time_init(void) -{ - mips_hpt_frequency = bcm63xx_get_cpu_freq() / 2; -} - -void __init plat_mem_setup(void) -{ - add_memory_region(0, bcm63xx_get_memory_size(), BOOT_MEM_RAM); - - _machine_halt = bcm63xx_machine_halt; - _machine_restart = __bcm63xx_machine_reboot; - pm_power_off = bcm63xx_machine_halt; - - set_io_port_base(0); - ioport_resource.start = 0; - ioport_resource.end = ~0; - - board_setup(); -} - -int __init bcm63xx_register_devices(void) -{ - return board_register_devices(); -} - -arch_initcall(bcm63xx_register_devices); diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/timer.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/timer.c deleted file mode 100644 index ba522bdcde..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/bcm63xx/timer.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/kernel.h> -#include <linux/err.h> -#include <linux/module.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/clk.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_timer.h> -#include <bcm63xx_regs.h> - -static DEFINE_SPINLOCK(timer_reg_lock); -static DEFINE_SPINLOCK(timer_data_lock); -static struct clk *periph_clk; - -static struct timer_data { - void (*cb)(void *); - void *data; -} timer_data[BCM63XX_TIMER_COUNT]; - -static irqreturn_t timer_interrupt(int irq, void *dev_id) -{ - u32 stat; - int i; - - spin_lock(&timer_reg_lock); - stat = bcm_timer_readl(TIMER_IRQSTAT_REG); - bcm_timer_writel(stat, TIMER_IRQSTAT_REG); - spin_unlock(&timer_reg_lock); - - for (i = 0; i < BCM63XX_TIMER_COUNT; i++) { - if (!(stat & TIMER_IRQSTAT_TIMER_CAUSE(i))) - continue; - - spin_lock(&timer_data_lock); - if (!timer_data[i].cb) { - spin_unlock(&timer_data_lock); - continue; - } - - timer_data[i].cb(timer_data[i].data); - spin_unlock(&timer_data_lock); - } - - return IRQ_HANDLED; -} - -int bcm63xx_timer_enable(int id) -{ - u32 reg; - unsigned long flags; - - if (id >= BCM63XX_TIMER_COUNT) - return -EINVAL; - - spin_lock_irqsave(&timer_reg_lock, flags); - - reg = bcm_timer_readl(TIMER_CTLx_REG(id)); - reg |= TIMER_CTL_ENABLE_MASK; - bcm_timer_writel(reg, TIMER_CTLx_REG(id)); - - reg = bcm_timer_readl(TIMER_IRQSTAT_REG); - reg |= TIMER_IRQSTAT_TIMER_IR_EN(id); - bcm_timer_writel(reg, TIMER_IRQSTAT_REG); - - spin_unlock_irqrestore(&timer_reg_lock, flags); - return 0; -} - -EXPORT_SYMBOL(bcm63xx_timer_enable); - -int bcm63xx_timer_disable(int id) -{ - u32 reg; - unsigned long flags; - - if (id >= BCM63XX_TIMER_COUNT) - return -EINVAL; - - spin_lock_irqsave(&timer_reg_lock, flags); - - reg = bcm_timer_readl(TIMER_CTLx_REG(id)); - reg &= ~TIMER_CTL_ENABLE_MASK; - bcm_timer_writel(reg, TIMER_CTLx_REG(id)); - - reg = bcm_timer_readl(TIMER_IRQSTAT_REG); - reg &= ~TIMER_IRQSTAT_TIMER_IR_EN(id); - bcm_timer_writel(reg, TIMER_IRQSTAT_REG); - - spin_unlock_irqrestore(&timer_reg_lock, flags); - return 0; -} - -EXPORT_SYMBOL(bcm63xx_timer_disable); - -int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data) -{ - unsigned long flags; - int ret; - - if (id >= BCM63XX_TIMER_COUNT || !callback) - return -EINVAL; - - ret = 0; - spin_lock_irqsave(&timer_data_lock, flags); - if (timer_data[id].cb) { - ret = -EBUSY; - goto out; - } - - timer_data[id].cb = callback; - timer_data[id].data = data; - -out: - spin_unlock_irqrestore(&timer_data_lock, flags); - return ret; -} - -EXPORT_SYMBOL(bcm63xx_timer_register); - -void bcm63xx_timer_unregister(int id) -{ - unsigned long flags; - - if (id >= BCM63XX_TIMER_COUNT) - return; - - spin_lock_irqsave(&timer_data_lock, flags); - timer_data[id].cb = NULL; - spin_unlock_irqrestore(&timer_data_lock, flags); -} - -EXPORT_SYMBOL(bcm63xx_timer_unregister); - -unsigned int bcm63xx_timer_countdown(unsigned int countdown_us) -{ - return (clk_get_rate(periph_clk) / (1000 * 1000)) * countdown_us; -} - -EXPORT_SYMBOL(bcm63xx_timer_countdown); - -int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us) -{ - u32 reg, countdown; - unsigned long flags; - - if (id >= BCM63XX_TIMER_COUNT) - return -EINVAL; - - countdown = bcm63xx_timer_countdown(countdown_us); - if (countdown & ~TIMER_CTL_COUNTDOWN_MASK) - return -EINVAL; - - spin_lock_irqsave(&timer_reg_lock, flags); - reg = bcm_timer_readl(TIMER_CTLx_REG(id)); - - if (monotonic) - reg &= ~TIMER_CTL_MONOTONIC_MASK; - else - reg |= TIMER_CTL_MONOTONIC_MASK; - - reg &= ~TIMER_CTL_COUNTDOWN_MASK; - reg |= countdown; - bcm_timer_writel(reg, TIMER_CTLx_REG(id)); - - spin_unlock_irqrestore(&timer_reg_lock, flags); - return 0; -} - -EXPORT_SYMBOL(bcm63xx_timer_set); - -int bcm63xx_timer_init(void) -{ - int ret, irq; - u32 reg; - - reg = bcm_timer_readl(TIMER_IRQSTAT_REG); - reg &= ~TIMER_IRQSTAT_TIMER0_IR_EN; - reg &= ~TIMER_IRQSTAT_TIMER1_IR_EN; - reg &= ~TIMER_IRQSTAT_TIMER2_IR_EN; - bcm_timer_writel(reg, TIMER_IRQSTAT_REG); - - periph_clk = clk_get(NULL, "periph"); - if (IS_ERR(periph_clk)) - return -ENODEV; - - irq = bcm63xx_get_irq_number(IRQ_TIMER); - ret = request_irq(irq, timer_interrupt, 0, "bcm63xx_timer", NULL); - if (ret) { - printk(KERN_ERR "bcm63xx_timer: failed to register irq\n"); - return ret; - } - - return 0; -} - -arch_initcall(bcm63xx_timer_init); diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/configs/bcm63xx_defconfig b/target/linux/brcm63xx/files-2.6.30/arch/mips/configs/bcm63xx_defconfig deleted file mode 100644 index 65cacae63f..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/configs/bcm63xx_defconfig +++ /dev/null @@ -1,868 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Fri Oct 17 06:51:37 2008 -# -CONFIG_MIPS=y - -# -# Machine selection -# -# CONFIG_MACH_ALCHEMY is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_BCM47XX is not set -CONFIG_BCM63XX=y -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_LEMOTE_FULONG is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MARKEINS is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_PMC_MSP is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP28 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SNI_RM is not set -# CONFIG_MACH_TX39XX is not set -# CONFIG_MACH_TX49XX is not set -# CONFIG_MIKROTIK_RB532 is not set -# CONFIG_WR_PPMC is not set - -# -# CPU support -# -CONFIG_BCM63XX_CPU_6348=y -CONFIG_BCM63XX_CPU_6358=y -CONFIG_BOARD_BCM963XX=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_ARCH_SUPPORTS_OPROFILE=y -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CMOS_UPDATE=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set -CONFIG_CEVT_R4K=y -CONFIG_CSRC_R4K=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -CONFIG_EARLY_PRINTK=y -CONFIG_SYS_HAS_EARLY_PRINTK=y -# CONFIG_HOTPLUG_CPU is not set -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_GPIO=y -CONFIG_CPU_BIG_ENDIAN=y -# CONFIG_CPU_LITTLE_ENDIAN is not set -CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y -CONFIG_IRQ_CPU=y -CONFIG_SWAP_IO_SPACE=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -# CONFIG_CPU_LOONGSON2 is not set -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_ARCH_POPULATES_NODE_MAP=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=0 -CONFIG_VIRT_TO_BUS=y -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -# CONFIG_HIGH_RES_TIMERS is not set -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -# CONFIG_SECCOMP is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -# CONFIG_LOCALVERSION_AUTO is not set -# CONFIG_SWAP is not set -# CONFIG_SYSVIPC is not set -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -# CONFIG_IKCONFIG is not set -CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set -# CONFIG_GROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -# CONFIG_PCSPKR_PLATFORM is not set -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -# CONFIG_FUTEX is not set -# CONFIG_EPOLL is not set -# CONFIG_SIGNALFD is not set -# CONFIG_TIMERFD is not set -# CONFIG_EVENTFD is not set -# CONFIG_SHMEM is not set -# CONFIG_VM_EVENT_COUNTERS is not set -# CONFIG_SLUB_DEBUG is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -# CONFIG_HAVE_KPROBES is not set -# CONFIG_HAVE_KRETPROBES is not set -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_TINY_SHMEM=y -CONFIG_BASE_SMALL=0 -# CONFIG_MODULES is not set -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -# CONFIG_IOSCHED_AS is not set -# CONFIG_IOSCHED_DEADLINE is not set -# CONFIG_IOSCHED_CFQ is not set -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -CONFIG_DEFAULT_NOOP=y -CONFIG_DEFAULT_IOSCHED="noop" -CONFIG_CLASSIC_RCU=y - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_PCI_DOMAINS=y -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCI_LEGACY is not set -CONFIG_MMU=y -CONFIG_PCCARD=y -# CONFIG_PCMCIA_DEBUG is not set -CONFIG_PCMCIA=y -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_PCMCIA_IOCTL=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -# CONFIG_YENTA is not set -# CONFIG_PD6729 is not set -# CONFIG_I82092 is not set -CONFIG_PCMCIA_BCM63XX=y -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_ARCH_SUSPEND_POSSIBLE=y -# CONFIG_PM is not set -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_PACKET is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -# CONFIG_IP_PNP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -# CONFIG_STANDALONE is not set -# CONFIG_PREVENT_FIRMWARE_BUILD is not set -CONFIG_FW_LOADER=y -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -# CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -# CONFIG_MTD_CHAR is not set -# CONFIG_MTD_BLKDEVS is not set -# CONFIG_MTD_BLOCK is not set -# CONFIG_MTD_BLOCK_RO is not set -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -# CONFIG_MTD_CFI_ADV_OPTIONS is not set -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -CONFIG_MTD_CFI_INTELEXT=y -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x8000000 -CONFIG_MTD_PHYSMAP_LEN=0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_INTEL_VR_NOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_PMC551 is not set -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# Enable only one of the two stacks, unless you know what you are doing -# -# CONFIG_FIREWIRE is not set -# CONFIG_IEEE1394 is not set -# CONFIG_I2O is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_ARCNET is not set -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -# CONFIG_MARVELL_PHY is not set -# CONFIG_DAVICOM_PHY is not set -# CONFIG_QSEMI_PHY is not set -# CONFIG_LXT_PHY is not set -# CONFIG_CICADA_PHY is not set -# CONFIG_VITESSE_PHY is not set -# CONFIG_SMSC_PHY is not set -# CONFIG_BROADCOM_PHY is not set -CONFIG_BCM63XX_PHY=y -# CONFIG_ICPLUS_PHY is not set -# CONFIG_REALTEK_PHY is not set -# CONFIG_FIXED_PHY is not set -# CONFIG_MDIO_BITBANG is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_NET_PCI is not set -# CONFIG_B44 is not set -CONFIG_BCM63XX_ENET=y -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set -# CONFIG_TR is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET is not set -# CONFIG_NET_PCMCIA is not set -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set -# CONFIG_PHONE is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -# CONFIG_DEVKMEM is not set -# CONFIG_SERIAL_NONSTANDARD is not set -# CONFIG_NOZOMI is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_SERIAL_BCM63XX=y -CONFIG_SERIAL_BCM63XX_CONSOLE=y -# CONFIG_UNIX98_PTYS is not set -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set - -# -# PCMCIA character devices -# -# CONFIG_SYNCLINK_CS is not set -# CONFIG_CARDMAN_4000 is not set -# CONFIG_CARDMAN_4040 is not set -# CONFIG_IPWIRELESS is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y -# CONFIG_I2C is not set -# CONFIG_SPI is not set -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_THERMAL is not set -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_DRM is not set -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -CONFIG_DISPLAY_SUPPORT=y - -# -# Display hardware drivers -# -# CONFIG_SOUND is not set -CONFIG_USB_SUPPORT=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set -# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set - -# -# Miscellaneous USB options -# -# CONFIG_USB_DEVICEFS is not set -# CONFIG_USB_DEVICE_CLASS is not set -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_OTG is not set -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_MON is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_C67X00_HCD is not set -CONFIG_USB_EHCI_HCD=y -# CONFIG_USB_EHCI_ROOT_HUB_TT is not set -# CONFIG_USB_EHCI_TT_NEWSCHED is not set -CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set -CONFIG_USB_OHCI_HCD=y -CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y -CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set -# CONFIG_USB_R8A66597_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set -# CONFIG_USB_WDM is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set - -# -# USB port drivers -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_SISUSBVGA is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_IOWARRIOR is not set -# CONFIG_USB_ISIGHTFW is not set -# CONFIG_USB_GADGET is not set -# CONFIG_MMC is not set -# CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set -# CONFIG_ACCESSIBILITY is not set -# CONFIG_INFINIBAND is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY is not set -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -# CONFIG_JFFS2_FS is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -# CONFIG_NETWORK_FILESYSTEMS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=1024 -CONFIG_MAGIC_SYSRQ=y -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -CONFIG_CMDLINE="console=ttyS0,115200" - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/include/asm/mach-bcm63xx b/target/linux/brcm63xx/files-2.6.30/arch/mips/include/asm/mach-bcm63xx deleted file mode 120000 index 8482b2ecfb..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/include/asm/mach-bcm63xx +++ /dev/null @@ -1 +0,0 @@ -../../../../include/asm-mips/mach-bcm63xx
\ No newline at end of file diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/fixup-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/fixup-bcm63xx.c deleted file mode 100644 index 340863009d..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/fixup-bcm63xx.c +++ /dev/null @@ -1,21 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <bcm63xx_cpu.h> - -int pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - return bcm63xx_get_irq_number(IRQ_PCI); -} - -int pcibios_plat_dev_init(struct pci_dev *dev) -{ - return 0; -} diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/ops-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/ops-bcm63xx.c deleted file mode 100644 index 822ae179bc..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/ops-bcm63xx.c +++ /dev/null @@ -1,467 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/io.h> - -#include "pci-bcm63xx.h" - -/* - * swizzle 32bits data to return only the needed part - */ -static int postprocess_read(u32 data, int where, unsigned int size) -{ - u32 ret; - - ret = 0; - switch (size) { - case 1: - ret = (data >> ((where & 3) << 3)) & 0xff; - break; - case 2: - ret = (data >> ((where & 3) << 3)) & 0xffff; - break; - case 4: - ret = data; - break; - } - return ret; -} - -static int preprocess_write(u32 orig_data, u32 val, int where, - unsigned int size) -{ - u32 ret; - - ret = 0; - switch (size) { - case 1: - ret = (orig_data & ~(0xff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 2: - ret = (orig_data & ~(0xffff << ((where & 3) << 3))) | - (val << ((where & 3) << 3)); - break; - case 4: - ret = val; - break; - } - return ret; -} - -/* - * setup hardware for a configuration cycle with given parameters - */ -static int bcm63xx_setup_cfg_access(int type, unsigned int busn, - unsigned int devfn, int where) -{ - unsigned int slot, func, reg; - u32 val; - - slot = PCI_SLOT(devfn); - func = PCI_FUNC(devfn); - reg = where >> 2; - - /* sanity check */ - if (slot > (MPI_L2PCFG_DEVNUM_MASK >> MPI_L2PCFG_DEVNUM_SHIFT)) - return 1; - - if (func > (MPI_L2PCFG_FUNC_MASK >> MPI_L2PCFG_FUNC_SHIFT)) - return 1; - - if (reg > (MPI_L2PCFG_REG_MASK >> MPI_L2PCFG_REG_SHIFT)) - return 1; - - /* ok, setup config access */ - val = (reg << MPI_L2PCFG_REG_SHIFT); - val |= (func << MPI_L2PCFG_FUNC_SHIFT); - val |= (slot << MPI_L2PCFG_DEVNUM_SHIFT); - val |= MPI_L2PCFG_CFG_USEREG_MASK; - val |= MPI_L2PCFG_CFG_SEL_MASK; - /* type 0 cycle for local bus, type 1 cycle for anything else */ - if (type != 0) { - /* FIXME: how to specify bus ??? */ - val |= (1 << MPI_L2PCFG_CFG_TYPE_SHIFT); - } - bcm_mpi_writel(val, MPI_L2PCFG_REG); - - return 0; -} - -static int bcm63xx_do_cfg_read(int type, unsigned int busn, - unsigned int devfn, int where, int size, - u32 *val) -{ - u32 data; - - /* two phase cycle, first we write address, then read data at - * another location, caller already has a spinlock so no need - * to add one here */ - if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) - return PCIBIOS_DEVICE_NOT_FOUND; - iob(); - data = le32_to_cpu(__raw_readl(pci_iospace_start)); - /* restore IO space normal behaviour */ - bcm_mpi_writel(0, MPI_L2PCFG_REG); - - *val = postprocess_read(data, where, size); - - return PCIBIOS_SUCCESSFUL; -} - -static int bcm63xx_do_cfg_write(int type, unsigned int busn, - unsigned int devfn, int where, int size, - u32 val) -{ - u32 data; - - /* two phase cycle, first we write address, then write data to - * another location, caller already has a spinlock so no need - * to add one here */ - if (bcm63xx_setup_cfg_access(type, busn, devfn, where)) - return PCIBIOS_DEVICE_NOT_FOUND; - iob(); - - data = le32_to_cpu(__raw_readl(pci_iospace_start)); - data = preprocess_write(data, val, where, size); - - __raw_writel(cpu_to_le32(data), pci_iospace_start); - wmb(); - /* no way to know the access is done, we have to wait */ - udelay(500); - /* restore IO space normal behaviour */ - bcm_mpi_writel(0, MPI_L2PCFG_REG); - - return PCIBIOS_SUCCESSFUL; -} - -static int bcm63xx_pci_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - int type; - - type = bus->parent ? 1 : 0; - - if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) - return PCIBIOS_DEVICE_NOT_FOUND; - - return bcm63xx_do_cfg_read(type, bus->number, devfn, - where, size, val); -} - -static int bcm63xx_pci_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - int type; - - type = bus->parent ? 1 : 0; - - if (type == 0 && PCI_SLOT(devfn) == CARDBUS_PCI_IDSEL) - return PCIBIOS_DEVICE_NOT_FOUND; - - return bcm63xx_do_cfg_write(type, bus->number, devfn, - where, size, val); -} - -struct pci_ops bcm63xx_pci_ops = { - .read = bcm63xx_pci_read, - .write = bcm63xx_pci_write -}; - -#ifdef CONFIG_CARDBUS -/* - * emulate configuration read access on a cardbus bridge - */ -#define FAKE_CB_BRIDGE_SLOT 0x1e - -static int fake_cb_bridge_bus_number = -1; - -static struct { - u16 pci_command; - u8 cb_latency; - u8 subordinate_busn; - u8 cardbus_busn; - u8 pci_busn; - int bus_assigned; - u16 bridge_control; - - u32 mem_base0; - u32 mem_limit0; - u32 mem_base1; - u32 mem_limit1; - - u32 io_base0; - u32 io_limit0; - u32 io_base1; - u32 io_limit1; -} fake_cb_bridge_regs; - -static int fake_cb_bridge_read(int where, int size, u32 *val) -{ - unsigned int reg; - u32 data; - - data = 0; - reg = where >> 2; - switch (reg) { - case (PCI_VENDOR_ID >> 2): - case (PCI_CB_SUBSYSTEM_VENDOR_ID >> 2): - /* create dummy vendor/device id from our cpu id */ - data = (bcm63xx_get_cpu_id() << 16) | PCI_VENDOR_ID_BROADCOM; - break; - - case (PCI_COMMAND >> 2): - data = (PCI_STATUS_DEVSEL_SLOW << 16); - data |= fake_cb_bridge_regs.pci_command; - break; - - case (PCI_CLASS_REVISION >> 2): - data = (PCI_CLASS_BRIDGE_CARDBUS << 16); - break; - - case (PCI_CACHE_LINE_SIZE >> 2): - data = (PCI_HEADER_TYPE_CARDBUS << 16); - break; - - case (PCI_INTERRUPT_LINE >> 2): - /* bridge control */ - data = (fake_cb_bridge_regs.bridge_control << 16); - /* pin:intA line:0xff */ - data |= (0x1 << 8) | 0xff; - break; - - case (PCI_CB_PRIMARY_BUS >> 2): - data = (fake_cb_bridge_regs.cb_latency << 24); - data |= (fake_cb_bridge_regs.subordinate_busn << 16); - data |= (fake_cb_bridge_regs.cardbus_busn << 8); - data |= fake_cb_bridge_regs.pci_busn; - break; - - case (PCI_CB_MEMORY_BASE_0 >> 2): - data = fake_cb_bridge_regs.mem_base0; - break; - - case (PCI_CB_MEMORY_LIMIT_0 >> 2): - data = fake_cb_bridge_regs.mem_limit0; - break; - - case (PCI_CB_MEMORY_BASE_1 >> 2): - data = fake_cb_bridge_regs.mem_base1; - break; - - case (PCI_CB_MEMORY_LIMIT_1 >> 2): - data = fake_cb_bridge_regs.mem_limit1; - break; - - case (PCI_CB_IO_BASE_0 >> 2): - /* | 1 for 32bits io support */ - data = fake_cb_bridge_regs.io_base0 | 0x1; - break; - - case (PCI_CB_IO_LIMIT_0 >> 2): - data = fake_cb_bridge_regs.io_limit0; - break; - - case (PCI_CB_IO_BASE_1 >> 2): - /* | 1 for 32bits io support */ - data = fake_cb_bridge_regs.io_base1 | 0x1; - break; - - case (PCI_CB_IO_LIMIT_1 >> 2): - data = fake_cb_bridge_regs.io_limit1; - break; - } - - *val = postprocess_read(data, where, size); - return PCIBIOS_SUCCESSFUL; -} - -/* - * emulate configuration write access on a cardbus bridge - */ -static int fake_cb_bridge_write(int where, int size, u32 val) -{ - unsigned int reg; - u32 data, tmp; - int ret; - - ret = fake_cb_bridge_read((where & ~0x3), 4, &data); - if (ret != PCIBIOS_SUCCESSFUL) - return ret; - - data = preprocess_write(data, val, where, size); - - reg = where >> 2; - switch (reg) { - case (PCI_COMMAND >> 2): - fake_cb_bridge_regs.pci_command = (data & 0xffff); - break; - - case (PCI_CB_PRIMARY_BUS >> 2): - fake_cb_bridge_regs.cb_latency = (data >> 24) & 0xff; - fake_cb_bridge_regs.subordinate_busn = (data >> 16) & 0xff; - fake_cb_bridge_regs.cardbus_busn = (data >> 8) & 0xff; - fake_cb_bridge_regs.pci_busn = data & 0xff; - if (fake_cb_bridge_regs.cardbus_busn) - fake_cb_bridge_regs.bus_assigned = 1; - break; - - case (PCI_INTERRUPT_LINE >> 2): - tmp = (data >> 16) & 0xffff; - /* disable memory prefetch support */ - tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM0; - tmp &= ~PCI_CB_BRIDGE_CTL_PREFETCH_MEM1; - fake_cb_bridge_regs.bridge_control = tmp; - break; - - case (PCI_CB_MEMORY_BASE_0 >> 2): - fake_cb_bridge_regs.mem_base0 = data; - break; - - case (PCI_CB_MEMORY_LIMIT_0 >> 2): - fake_cb_bridge_regs.mem_limit0 = data; - break; - - case (PCI_CB_MEMORY_BASE_1 >> 2): - fake_cb_bridge_regs.mem_base1 = data; - break; - - case (PCI_CB_MEMORY_LIMIT_1 >> 2): - fake_cb_bridge_regs.mem_limit1 = data; - break; - - case (PCI_CB_IO_BASE_0 >> 2): - fake_cb_bridge_regs.io_base0 = data; - break; - - case (PCI_CB_IO_LIMIT_0 >> 2): - fake_cb_bridge_regs.io_limit0 = data; - break; - - case (PCI_CB_IO_BASE_1 >> 2): - fake_cb_bridge_regs.io_base1 = data; - break; - - case (PCI_CB_IO_LIMIT_1 >> 2): - fake_cb_bridge_regs.io_limit1 = data; - break; - } - - return PCIBIOS_SUCCESSFUL; -} - -static int bcm63xx_cb_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 *val) -{ - /* snoop access to slot 0x1e on root bus, we fake a cardbus - * bridge at this location */ - if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { - fake_cb_bridge_bus_number = bus->number; - return fake_cb_bridge_read(where, size, val); - } - - /* a configuration cycle for the device behind the cardbus - * bridge is actually done as a type 0 cycle on the primary - * bus. This means that only one device can be on the cardbus - * bus */ - if (fake_cb_bridge_regs.bus_assigned && - bus->number == fake_cb_bridge_regs.cardbus_busn && - PCI_SLOT(devfn) == 0) - return bcm63xx_do_cfg_read(0, 0, - PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), - where, size, val); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -static int bcm63xx_cb_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - if (!bus->parent && PCI_SLOT(devfn) == FAKE_CB_BRIDGE_SLOT) { - fake_cb_bridge_bus_number = bus->number; - return fake_cb_bridge_write(where, size, val); - } - - if (fake_cb_bridge_regs.bus_assigned && - bus->number == fake_cb_bridge_regs.cardbus_busn && - PCI_SLOT(devfn) == 0) - return bcm63xx_do_cfg_write(0, 0, - PCI_DEVFN(CARDBUS_PCI_IDSEL, 0), - where, size, val); - - return PCIBIOS_DEVICE_NOT_FOUND; -} - -struct pci_ops bcm63xx_cb_ops = { - .read = bcm63xx_cb_read, - .write = bcm63xx_cb_write, -}; - -/* - * only one IO window, so it cannot be shared by PCI and cardbus, use - * fixup to choose and detect unhandled configuration - */ -static void bcm63xx_fixup(struct pci_dev *dev) -{ - static int io_window = -1; - int i, found, new_io_window; - u32 val; - - /* look for any io resource */ - found = 0; - for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { - if (pci_resource_flags(dev, i) & IORESOURCE_IO) { - found = 1; - break; - } - } - - if (!found) - return; - - /* skip our fake bus with only cardbus bridge on it */ - if (dev->bus->number == fake_cb_bridge_bus_number) - return; - - /* find on which bus the device is */ - if (fake_cb_bridge_regs.bus_assigned && - dev->bus->number == fake_cb_bridge_regs.cardbus_busn && - PCI_SLOT(dev->devfn) == 0) - new_io_window = 1; - else - new_io_window = 0; - - if (new_io_window == io_window) - return; - - if (io_window != -1) { - printk(KERN_ERR "bcm63xx: both PCI and cardbus devices " - "need IO, which hardware cannot do\n"); - return; - } - - printk(KERN_INFO "bcm63xx: PCI IO window assigned to %s\n", - (new_io_window == 0) ? "PCI" : "cardbus"); - - val = bcm_mpi_readl(MPI_L2PIOREMAP_REG); - if (io_window) - val |= MPI_L2PREMAP_IS_CARDBUS_MASK; - else - val &= ~MPI_L2PREMAP_IS_CARDBUS_MASK; - bcm_mpi_writel(val, MPI_L2PIOREMAP_REG); - - io_window = new_io_window; -} - -DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, bcm63xx_fixup); -#endif diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c deleted file mode 100644 index 601700dfde..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.c +++ /dev/null @@ -1,222 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <asm/bootinfo.h> - -#include "pci-bcm63xx.h" - -/* allow PCI to be disabled at runtime depending on board nvram - * configuration */ -int bcm63xx_pci_enabled = 0; - -static struct resource bcm_pci_mem_resource = { - .name = "bcm63xx PCI memory space", - .start = BCM_PCI_MEM_BASE_PA, - .end = BCM_PCI_MEM_END_PA, - .flags = IORESOURCE_MEM -}; - -static struct resource bcm_pci_io_resource = { - .name = "bcm63xx PCI IO space", - .start = BCM_PCI_IO_BASE_PA, -#ifdef CONFIG_CARDBUS - .end = BCM_PCI_IO_HALF_PA, -#else - .end = BCM_PCI_IO_END_PA, -#endif - .flags = IORESOURCE_IO -}; - -struct pci_controller bcm63xx_controller = { - .pci_ops = &bcm63xx_pci_ops, - .io_resource = &bcm_pci_io_resource, - .mem_resource = &bcm_pci_mem_resource, -}; - -/* - * We handle cardbus via a fake Cardbus bridge, memory and io spaces - * have to be clearly separated from PCI one since we have different - * memory decoder. - */ -#ifdef CONFIG_CARDBUS -static struct resource bcm_cb_mem_resource = { - .name = "bcm63xx Cardbus memory space", - .start = BCM_CB_MEM_BASE_PA, - .end = BCM_CB_MEM_END_PA, - .flags = IORESOURCE_MEM -}; - -static struct resource bcm_cb_io_resource = { - .name = "bcm63xx Cardbus IO space", - .start = BCM_PCI_IO_HALF_PA + 1, - .end = BCM_PCI_IO_END_PA, - .flags = IORESOURCE_IO -}; - -struct pci_controller bcm63xx_cb_controller = { - .pci_ops = &bcm63xx_cb_ops, - .io_resource = &bcm_cb_io_resource, - .mem_resource = &bcm_cb_mem_resource, -}; -#endif - -static u32 bcm63xx_int_cfg_readl(u32 reg) -{ - u32 tmp; - - tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; - tmp |= MPI_PCICFGCTL_WRITEEN_MASK; - bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); - iob(); - return bcm_mpi_readl(MPI_PCICFGDATA_REG); -} - -static void bcm63xx_int_cfg_writel(u32 val, u32 reg) -{ - u32 tmp; - - tmp = reg & MPI_PCICFGCTL_CFGADDR_MASK; - tmp |= MPI_PCICFGCTL_WRITEEN_MASK; - bcm_mpi_writel(tmp, MPI_PCICFGCTL_REG); - bcm_mpi_writel(val, MPI_PCICFGDATA_REG); -} - -void __iomem *pci_iospace_start; - -static int __init bcm63xx_pci_init(void) -{ - unsigned int mem_size; - u32 val; - - if (!BCMCPU_IS_6348() && !BCMCPU_IS_6358()) - return -ENODEV; - - if (!bcm63xx_pci_enabled) - return -ENODEV; - - /* - * configuration access are done through IO space, remap 4 - * first bytes to access it from CPU. - * - * this means that no io access from CPU should happen while - * we do a configuration cycle, but there's no way we can add - * a spinlock for each io access, so this is currently kind of - * broken on SMP. - */ - pci_iospace_start = ioremap_nocache(BCM_PCI_IO_BASE_PA, 4); - if (!pci_iospace_start) - return -ENOMEM; - - /* setup local bus to PCI access (PCI memory) */ - val = BCM_PCI_MEM_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PMEMBASE1_REG); - bcm_mpi_writel(~(BCM_PCI_MEM_SIZE - 1), MPI_L2PMEMRANGE1_REG); - bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PMEMREMAP1_REG); - - /* set Cardbus IDSEL (type 0 cfg access on primary bus for - * this IDSEL will be done on Cardbus instead) */ - val = bcm_pcmcia_readl(PCMCIA_C1_REG); - val &= ~PCMCIA_C1_CBIDSEL_MASK; - val |= (CARDBUS_PCI_IDSEL << PCMCIA_C1_CBIDSEL_SHIFT); - bcm_pcmcia_writel(val, PCMCIA_C1_REG); - -#ifdef CONFIG_CARDBUS - /* setup local bus to PCI access (Cardbus memory) */ - val = BCM_CB_MEM_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PMEMBASE2_REG); - bcm_mpi_writel(~(BCM_CB_MEM_SIZE - 1), MPI_L2PMEMRANGE2_REG); - val |= MPI_L2PREMAP_ENABLED_MASK | MPI_L2PREMAP_IS_CARDBUS_MASK; - bcm_mpi_writel(val, MPI_L2PMEMREMAP2_REG); -#else - /* disable second access windows */ - bcm_mpi_writel(0, MPI_L2PMEMREMAP2_REG); -#endif - - /* setup local bus to PCI access (IO memory), we have only 1 - * IO window for both PCI and cardbus, but it cannot handle - * both at the same time, assume standard PCI for now, if - * cardbus card has IO zone, PCI fixup will change window to - * cardbus */ - val = BCM_PCI_IO_BASE_PA & MPI_L2P_BASE_MASK; - bcm_mpi_writel(val, MPI_L2PIOBASE_REG); - bcm_mpi_writel(~(BCM_PCI_IO_SIZE - 1), MPI_L2PIORANGE_REG); - bcm_mpi_writel(val | MPI_L2PREMAP_ENABLED_MASK, MPI_L2PIOREMAP_REG); - - /* enable PCI related GPIO pins */ - bcm_mpi_writel(MPI_LOCBUSCTL_EN_PCI_GPIO_MASK, MPI_LOCBUSCTL_REG); - - /* setup PCI to local bus access, used by PCI device to target - * local RAM while bus mastering */ - bcm63xx_int_cfg_writel(0, PCI_BASE_ADDRESS_3); - if (BCMCPU_IS_6358()) - val = MPI_SP0_REMAP_ENABLE_MASK; - else - val = 0; - bcm_mpi_writel(val, MPI_SP0_REMAP_REG); - - bcm63xx_int_cfg_writel(0x0, PCI_BASE_ADDRESS_4); - bcm_mpi_writel(0, MPI_SP1_REMAP_REG); - - mem_size = bcm63xx_get_memory_size(); - - /* 6348 before rev b0 exposes only 16 MB of RAM memory through - * PCI, throw a warning if we have more memory */ - if (BCMCPU_IS_6348() && (bcm63xx_get_cpu_rev() & 0xf0) == 0xa0) { - if (mem_size > (16 * 1024 * 1024)) - printk(KERN_WARNING "bcm63xx: this CPU " - "revision cannot handle more than 16MB " - "of RAM for PCI bus mastering\n"); - } else { - /* setup sp0 range to local RAM size */ - bcm_mpi_writel(~(mem_size - 1), MPI_SP0_RANGE_REG); - bcm_mpi_writel(0, MPI_SP1_RANGE_REG); - } - - /* change host bridge retry counter to infinite number of - * retry, needed for some broadcom wifi cards with Silicon - * Backplane bus where access to srom seems very slow */ - val = bcm63xx_int_cfg_readl(BCMPCI_REG_TIMERS); - val &= ~REG_TIMER_RETRY_MASK; - bcm63xx_int_cfg_writel(val, BCMPCI_REG_TIMERS); - - /* enable memory decoder and bus mastering */ - val = bcm63xx_int_cfg_readl(PCI_COMMAND); - val |= (PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); - bcm63xx_int_cfg_writel(val, PCI_COMMAND); - - /* enable read prefetching & disable byte swapping for bus - * mastering transfers */ - val = bcm_mpi_readl(MPI_PCIMODESEL_REG); - val &= ~MPI_PCIMODESEL_BAR1_NOSWAP_MASK; - val &= ~MPI_PCIMODESEL_BAR2_NOSWAP_MASK; - val &= ~MPI_PCIMODESEL_PREFETCH_MASK; - val |= (8 << MPI_PCIMODESEL_PREFETCH_SHIFT); - bcm_mpi_writel(val, MPI_PCIMODESEL_REG); - - /* enable pci interrupt */ - val = bcm_mpi_readl(MPI_LOCINT_REG); - val |= MPI_LOCINT_MASK(MPI_LOCINT_EXT_PCI_INT); - bcm_mpi_writel(val, MPI_LOCINT_REG); - - register_pci_controller(&bcm63xx_controller); - -#ifdef CONFIG_CARDBUS - register_pci_controller(&bcm63xx_cb_controller); -#endif - - /* mark memory space used for IO mapping as reserved */ - request_mem_region(BCM_PCI_IO_BASE_PA, BCM_PCI_IO_SIZE, - "bcm63xx PCI IO space"); - return 0; -} - -arch_initcall(bcm63xx_pci_init); diff --git a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.h b/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.h deleted file mode 100644 index a6e594ef3d..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/arch/mips/pci/pci-bcm63xx.h +++ /dev/null @@ -1,27 +0,0 @@ -#ifndef PCI_BCM63XX_H_ -#define PCI_BCM63XX_H_ - -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_dev_pci.h> - -/* - * Cardbus shares the PCI bus, but has no IDSEL, so a special id is - * reserved for it. If you have a standard PCI device at this id, you - * need to change the following definition. - */ -#define CARDBUS_PCI_IDSEL 0x8 - -/* - * defined in ops-bcm63xx.c - */ -extern struct pci_ops bcm63xx_pci_ops; -extern struct pci_ops bcm63xx_cb_ops; - -/* - * defined in pci-bcm63xx.c - */ -extern void __iomem *pci_iospace_start; - -#endif /* ! PCI_BCM63XX_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/mtd/maps/bcm963xx-flash.c b/target/linux/brcm63xx/files-2.6.30/drivers/mtd/maps/bcm963xx-flash.c deleted file mode 100644 index abb20b61f3..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/mtd/maps/bcm963xx-flash.c +++ /dev/null @@ -1,399 +0,0 @@ -/* - * Copyright (C) 2006-2008 Florian Fainelli <florian@openwrt.org> - * Mike Albon <malbon@openwrt.org> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/mtd/map.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> -#include <linux/vmalloc.h> -#include <linux/platform_device.h> - -#include <bcm_tag.h> -#include <asm/io.h> - -#define BUSWIDTH 2 /* Buswidth */ -#define EXTENDED_SIZE 0xBFC00000 /* Extended flash address */ - -#define PFX KBUILD_MODNAME ": " - -extern int parse_redboot_partitions(struct mtd_info *master, struct mtd_partition **pparts, unsigned long fis_origin); -static struct mtd_partition *parsed_parts; - -static struct mtd_info *bcm963xx_mtd_info; - -static struct map_info bcm963xx_map = { - .name = "bcm963xx", - .bankwidth = BUSWIDTH, -}; - -static struct tagiddesc_t tagidtab[NUM_TAGID] = TAGID_DEFINITIONS; - -static uint32_t tagcrc32tab[256] = { - 0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA, 0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3, - 0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988, 0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91, - 0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE, 0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7, - 0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC, 0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5, - 0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172, 0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B, - 0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940, 0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59, - 0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116, 0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F, - 0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924, 0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D, - 0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A, 0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433, - 0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818, 0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01, - 0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E, 0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457, - 0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C, 0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65, - 0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2, 0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB, - 0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0, 0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9, - 0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086, 0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F, - 0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4, 0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD, - 0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A, 0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683, - 0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8, 0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1, - 0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE, 0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7, - 0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC, 0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5, - 0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252, 0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B, - 0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60, 0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79, - 0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236, 0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F, - 0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04, 0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D, - 0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A, 0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713, - 0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38, 0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21, - 0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E, 0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777, - 0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C, 0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45, - 0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2, 0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB, - 0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0, 0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9, - 0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6, 0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF, - 0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94, 0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D -}; - -static uint32_t tagcrc32(uint32_t crc, uint8_t *data, size_t len) -{ - while (len--) - crc = (crc >> 8) ^ tagcrc32tab[(crc ^ *data++) & 0xFF]; - - return crc; -} - -static int parse_cfe_partitions( struct mtd_info *master, struct mtd_partition **pparts) -{ - int nrparts = 3, curpart = 0; /* CFE,NVRAM and global LINUX are always present. */ - union bcm_tag *buf; - struct mtd_partition *parts; - int ret; - size_t retlen; - unsigned int rootfsaddr, kerneladdr, spareaddr; - unsigned int rootfslen, kernellen, sparelen, totallen; - unsigned char *tagid; - int namelen = 0; - int i; - uint32_t tagidcrc; - uint32_t calctagidcrc; - bool tagid_match = false; - char *boardid; - char *tagversion; - char *matchtagid; - - /* Allocate memory for buffer */ - buf = vmalloc(sizeof(union bcm_tag)); - if (!buf) - return -ENOMEM; - - /* Get the tag */ - ret = master->read(master,master->erasesize,sizeof(union bcm_tag), &retlen, (void *)buf); - if (retlen != sizeof(union bcm_tag)){ - vfree(buf); - return -EIO; - } - - /* tagId isn't in the same location, so we check each tagid against the - * tagid CRC. If the CRC is valid we have found the right tag and so - * use that tag - */ - - for (i = 0; i < NUM_TAGID; i++) { - switch(i) { - case 0: - matchtagid = "bccfe"; - tagid = &(buf->bccfe.tagId[0]); - sscanf(buf->bccfe.rootAddress,"%u", &rootfsaddr); - sscanf(buf->bccfe.rootLength, "%u", &rootfslen); - sscanf(buf->bccfe.kernelAddress, "%u", &kerneladdr); - sscanf(buf->bccfe.kernelLength, "%u", &kernellen); - sscanf(buf->bccfe.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->bccfe.tagIdCRC[0]); - tagversion = &(buf->bccfe.tagVersion[0]); - boardid = &(buf->bccfe.boardid[0]); - break; - case 1: - matchtagid = "bc300"; - tagid = &(buf->bc300.tagId[0]); - sscanf(buf->bc300.rootAddress,"%u", &rootfsaddr); - sscanf(buf->bc300.rootLength, "%u", &rootfslen); - sscanf(buf->bc300.kernelAddress, "%u", &kerneladdr); - sscanf(buf->bc300.kernelLength, "%u", &kernellen); - sscanf(buf->bc300.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->bc300.tagIdCRC[0]); - tagversion = &(buf->bc300.tagVersion[0]); - boardid = &(buf->bc300.boardid[0]); - break; - case 2: - matchtagid = "ag306"; - tagid = &(buf->ag306.tagId[0]); - sscanf(buf->ag306.rootAddress,"%u", &rootfsaddr); - sscanf(buf->ag306.rootLength, "%u", &rootfslen); - sscanf(buf->ag306.kernelAddress, "%u", &kerneladdr); - sscanf(buf->ag306.kernelLength, "%u", &kernellen); - sscanf(buf->ag306.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->ag306.tagIdCRC[0]); - tagversion = &(buf->ag306.tagVersion[0]); - boardid = &(buf->ag306.boardid[0]); - break; - case 3: - matchtagid = "bc221"; - tagid = &(buf->bc221.tagId[0]); - sscanf(buf->bc221.rootAddress,"%u", &rootfsaddr); - sscanf(buf->bc221.rootLength, "%u", &rootfslen); - sscanf(buf->bc221.kernelAddress, "%u", &kerneladdr); - sscanf(buf->bc221.kernelLength, "%u", &kernellen); - sscanf(buf->bc221.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->bc221.tagIdCRC[0]); - tagversion = &(buf->bc221.tagVersion[0]); - boardid = &(buf->bc221.boardid[0]); - break; - case 4: - matchtagid = "bc310"; - tagid = &(buf->bc310.tagId[0]); - sscanf(buf->bc310.rootAddress,"%u", &rootfsaddr); - sscanf(buf->bc310.rootLength, "%u", &rootfslen); - sscanf(buf->bc310.kernelAddress, "%u", &kerneladdr); - sscanf(buf->bc310.kernelLength, "%u", &kernellen); - sscanf(buf->bc310.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->bc310.tagIdCRC[0]); - tagversion = &(buf->bc310.tagVersion[0]); - boardid = &(buf->bc310.boardid[0]); - break; - } - if (strncmp(tagid, matchtagid, TAGID_LEN) != 0) { - continue; - } - - calctagidcrc = htonl(tagcrc32(IMAGETAG_CRC_START, tagid, TAGID_LEN)); - if (tagidcrc == calctagidcrc) { - tagid_match = true; - break; - } - } - - if (!tagid_match) { - tagid = "bcram"; - sscanf(buf->bccfe.rootAddress,"%u", &rootfsaddr); - sscanf(buf->bccfe.rootLength, "%u", &rootfslen); - sscanf(buf->bccfe.kernelAddress, "%u", &kerneladdr); - sscanf(buf->bccfe.kernelLength, "%u", &kernellen); - sscanf(buf->bccfe.totalLength, "%u", &totallen); - tagidcrc = *(uint32_t *)&(buf->bccfe.tagIdCRC[0]); - tagversion = &(buf->bccfe.tagVersion[0]); - boardid = &(buf->bccfe.boardid[0]); - } - - printk(KERN_INFO PFX "CFE boot tag found with version %s, board type %s, and tagid %s.\n",tagversion,boardid,tagid); - - rootfsaddr = rootfsaddr - EXTENDED_SIZE; - kerneladdr = kerneladdr - EXTENDED_SIZE; - spareaddr = roundup(totallen,master->erasesize) + master->erasesize; - sparelen = master->size - spareaddr - master->erasesize; - - /* Determine number of partitions */ - namelen = 8; - if (rootfslen > 0){ - nrparts++; - namelen =+ 6; - }; - if (kernellen > 0) { - nrparts++; - namelen =+ 6; - }; - - /* Ask kernel for more memory */ - parts = kzalloc(sizeof(*parts) * nrparts + 10 * nrparts, GFP_KERNEL); - if (!parts) { - vfree(buf); - return -ENOMEM; - }; - - /* Start building partition list */ - parts[curpart].name = "CFE"; - parts[curpart].offset = 0; - parts[curpart].size = master->erasesize; - curpart++; - - if (kernellen > 0) { - parts[curpart].name = "kernel"; - parts[curpart].offset = kerneladdr; - parts[curpart].size = kernellen; - curpart++; - }; - - if (rootfslen > 0) { - parts[curpart].name = "rootfs"; - parts[curpart].offset = rootfsaddr; - parts[curpart].size = rootfslen; - if (sparelen > 0) - parts[curpart].size += sparelen; - curpart++; - }; - - parts[curpart].name = "nvram"; - parts[curpart].offset = master->size - master->erasesize; - parts[curpart].size = master->erasesize; - - /* Global partition "linux" to make easy firmware upgrade */ - curpart++; - parts[curpart].name = "linux"; - parts[curpart].offset = parts[0].size; - parts[curpart].size = master->size - parts[0].size - parts[3].size; - - for (i = 0; i < nrparts; i++) - printk(KERN_INFO PFX "Partition %d is %s offset %lx and length %lx\n", i, parts[i].name, parts[i].offset, parts[i].size); - - printk(KERN_INFO PFX "Spare partition is %x offset and length %x\n", spareaddr, sparelen); - *pparts = parts; - vfree(buf); - - return nrparts; -}; - -static int bcm963xx_detect_cfe(struct mtd_info *master) -{ - int idoffset = 0x4e0; - static char idstring[8] = "CFE1CFE1"; - char buf[9]; - int ret; - size_t retlen; - - ret = master->read(master, idoffset, 8, &retlen, (void *)buf); - buf[retlen] = 0; - printk(KERN_INFO PFX "Read Signature value of %s\n", buf); - - return strncmp(idstring, buf, 8); -} - -static int bcm963xx_probe(struct platform_device *pdev) -{ - int err = 0; - int parsed_nr_parts = 0; - char *part_type; - struct resource *r; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - bcm963xx_map.phys = r->start; - bcm963xx_map.size = (r->end - r->start) + 1; - bcm963xx_map.virt = ioremap(r->start, r->end - r->start + 1); - - if (!bcm963xx_map.virt) { - printk(KERN_ERR PFX "Failed to ioremap\n"); - return -EIO; - } - printk(KERN_INFO PFX "0x%08lx at 0x%08x\n", bcm963xx_map.size, bcm963xx_map.phys); - - simple_map_init(&bcm963xx_map); - - bcm963xx_mtd_info = do_map_probe("cfi_probe", &bcm963xx_map); - if (!bcm963xx_mtd_info) { - printk(KERN_ERR PFX "Failed to probe using CFI\n"); - err = -EIO; - goto err_probe; - } - - bcm963xx_mtd_info->owner = THIS_MODULE; - - /* This is mutually exclusive */ - if (bcm963xx_detect_cfe(bcm963xx_mtd_info) == 0) { - printk(KERN_INFO PFX "CFE bootloader detected\n"); - if (parsed_nr_parts == 0) { - int ret = parse_cfe_partitions(bcm963xx_mtd_info, &parsed_parts); - if (ret > 0) { - part_type = "CFE"; - parsed_nr_parts = ret; - } - } - } else { - printk(KERN_INFO PFX "assuming RedBoot bootloader\n"); - if (bcm963xx_mtd_info->size > 0x00400000) { - printk(KERN_INFO PFX "Support for extended flash memory size : 0x%lx ; ONLY 64MBIT SUPPORT\n", bcm963xx_mtd_info->size); - bcm963xx_map.virt = (u32)(EXTENDED_SIZE); - } - -#ifdef CONFIG_MTD_REDBOOT_PARTS - if (parsed_nr_parts == 0) { - int ret = parse_redboot_partitions(bcm963xx_mtd_info, &parsed_parts, 0); - if (ret > 0) { - part_type = "RedBoot"; - parsed_nr_parts = ret; - } - } -#endif - } - - return add_mtd_partitions(bcm963xx_mtd_info, parsed_parts, parsed_nr_parts); - -err_probe: - iounmap(bcm963xx_map.virt); - return err; -} - -static int bcm963xx_remove(struct platform_device *pdev) -{ - if (bcm963xx_mtd_info) { - del_mtd_partitions(bcm963xx_mtd_info); - map_destroy(bcm963xx_mtd_info); - } - - if (bcm963xx_map.virt) { - iounmap(bcm963xx_map.virt); - bcm963xx_map.virt = 0; - } - - return 0; -} - -static struct platform_driver bcm63xx_mtd_dev = { - .probe = bcm963xx_probe, - .remove = bcm963xx_remove, - .driver = { - .name = "bcm963xx-flash", - .owner = THIS_MODULE, - }, -}; - -static int __init bcm963xx_mtd_init(void) -{ - return platform_driver_register(&bcm63xx_mtd_dev); -} - -static void __exit bcm963xx_mtd_exit(void) -{ - platform_driver_unregister(&bcm63xx_mtd_dev); -} - -module_init(bcm963xx_mtd_init); -module_exit(bcm963xx_mtd_exit); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("Broadcom BCM63xx MTD partition parser/mapping for CFE and RedBoot"); -MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -MODULE_AUTHOR("Mike Albon <malbon@openwrt.org>"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.c b/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.c deleted file mode 100644 index d338bbc08d..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.c +++ /dev/null @@ -1,1964 +0,0 @@ -/* - * Driver for BCM963xx builtin Ethernet mac - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ -#include <linux/init.h> -#include <linux/module.h> -#include <linux/clk.h> -#include <linux/etherdevice.h> -#include <linux/delay.h> -#include <linux/ethtool.h> -#include <linux/crc32.h> -#include <linux/err.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> -#include <linux/if_vlan.h> -#include <linux/version.h> - -#include <bcm63xx_dev_enet.h> -#include "bcm63xx_enet.h" - -static char bcm_enet_driver_name[] = "bcm63xx_enet"; -static char bcm_enet_driver_version[] = "1.0"; - -static int copybreak __read_mostly = 128; -module_param(copybreak, int, 0); -MODULE_PARM_DESC(copybreak, "Receive copy threshold"); - -/* io memory shared between all devices */ -static void __iomem *bcm_enet_shared_base; - -/* - * io helpers to access mac registers - */ -static inline u32 enet_readl(struct bcm_enet_priv *priv, u32 off) -{ - return bcm_readl(priv->base + off); -} - -static inline void enet_writel(struct bcm_enet_priv *priv, - u32 val, u32 off) -{ - bcm_writel(val, priv->base + off); -} - -/* - * io helpers to access shared registers - */ -static inline u32 enet_dma_readl(struct bcm_enet_priv *priv, u32 off) -{ - return bcm_readl(bcm_enet_shared_base + off); -} - -static inline void enet_dma_writel(struct bcm_enet_priv *priv, - u32 val, u32 off) -{ - bcm_writel(val, bcm_enet_shared_base + off); -} - -/* - * write given data into mii register and wait for transfer to end - * with timeout (average measured transfer time is 25us) - */ -static int do_mdio_op(struct bcm_enet_priv *priv, unsigned int data) -{ - int limit; - - /* make sure mii interrupt status is cleared */ - enet_writel(priv, ENET_IR_MII, ENET_IR_REG); - - enet_writel(priv, data, ENET_MIIDATA_REG); - wmb(); - - /* busy wait on mii interrupt bit, with timeout */ - limit = 1000; - do { - if (enet_readl(priv, ENET_IR_REG) & ENET_IR_MII) - break; - udelay(1); - } while (limit-- >= 0); - - return (limit < 0) ? 1 : 0; -} - -/* - * MII internal read callback - */ -static int bcm_enet_mdio_read(struct bcm_enet_priv *priv, int mii_id, - int regnum) -{ - u32 tmp, val; - - tmp = regnum << ENET_MIIDATA_REG_SHIFT; - tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT; - tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT; - tmp |= ENET_MIIDATA_OP_READ_MASK; - - if (do_mdio_op(priv, tmp)) - return -1; - - val = enet_readl(priv, ENET_MIIDATA_REG); - val &= 0xffff; - return val; -} - -/* - * MII internal write callback - */ -static int bcm_enet_mdio_write(struct bcm_enet_priv *priv, int mii_id, - int regnum, u16 value) -{ - u32 tmp; - - tmp = (value & 0xffff) << ENET_MIIDATA_DATA_SHIFT; - tmp |= 0x2 << ENET_MIIDATA_TA_SHIFT; - tmp |= regnum << ENET_MIIDATA_REG_SHIFT; - tmp |= mii_id << ENET_MIIDATA_PHYID_SHIFT; - tmp |= ENET_MIIDATA_OP_WRITE_MASK; - - (void)do_mdio_op(priv, tmp); - return 0; -} - -/* - * MII read callback from phylib - */ -static int bcm_enet_mdio_read_phylib(struct mii_bus *bus, int mii_id, - int regnum) -{ - return bcm_enet_mdio_read(bus->priv, mii_id, regnum); -} - -/* - * MII write callback from phylib - */ -static int bcm_enet_mdio_write_phylib(struct mii_bus *bus, int mii_id, - int regnum, u16 value) -{ - return bcm_enet_mdio_write(bus->priv, mii_id, regnum, value); -} - -/* - * MII read callback from mii core - */ -static int bcm_enet_mdio_read_mii(struct net_device *dev, int mii_id, - int regnum) -{ - return bcm_enet_mdio_read(netdev_priv(dev), mii_id, regnum); -} - -/* - * MII write callback from mii core - */ -static void bcm_enet_mdio_write_mii(struct net_device *dev, int mii_id, - int regnum, int value) -{ - bcm_enet_mdio_write(netdev_priv(dev), mii_id, regnum, value); -} - -/* - * refill rx queue - */ -static int bcm_enet_refill_rx(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - - while (priv->rx_desc_count < priv->rx_ring_size) { - struct bcm_enet_desc *desc; - struct sk_buff *skb; - dma_addr_t p; - int desc_idx; - u32 len_stat; - - desc_idx = priv->rx_dirty_desc; - desc = &priv->rx_desc_cpu[desc_idx]; - - if (!priv->rx_skb[desc_idx]) { - skb = netdev_alloc_skb(dev, priv->rx_skb_size); - if (!skb) - break; - priv->rx_skb[desc_idx] = skb; - - p = dma_map_single(&priv->pdev->dev, skb->data, - priv->rx_skb_size, - DMA_FROM_DEVICE); - desc->address = p; - } - - len_stat = priv->rx_skb_size << DMADESC_LENGTH_SHIFT; - len_stat |= DMADESC_OWNER_MASK; - if (priv->rx_dirty_desc == priv->rx_ring_size - 1) { - len_stat |= DMADESC_WRAP_MASK; - priv->rx_dirty_desc = 0; - } else { - priv->rx_dirty_desc++; - } - wmb(); - desc->len_stat = len_stat; - - priv->rx_desc_count++; - - /* tell dma engine we allocated one buffer */ - enet_dma_writel(priv, 1, ENETDMA_BUFALLOC_REG(priv->rx_chan)); - } - - /* If rx ring is still empty, set a timer to try allocating - * again at a later time. */ - if (priv->rx_desc_count == 0 && netif_running(dev)) { - dev_warn(&priv->pdev->dev, "unable to refill rx ring\n"); - priv->rx_timeout.expires = jiffies + HZ; - add_timer(&priv->rx_timeout); - } - - return 0; -} - -/* - * timer callback to defer refill rx queue in case we're OOM - */ -static void bcm_enet_refill_rx_timer(unsigned long data) -{ - struct net_device *dev; - struct bcm_enet_priv *priv; - - dev = (struct net_device *)data; - priv = netdev_priv(dev); - - spin_lock(&priv->rx_lock); - bcm_enet_refill_rx((struct net_device *)data); - spin_unlock(&priv->rx_lock); -} - -/* - * extract packet from rx queue - */ -static int bcm_enet_receive_queue(struct net_device *dev, int budget) -{ - struct bcm_enet_priv *priv; - struct device *kdev; - int processed; - - priv = netdev_priv(dev); - kdev = &priv->pdev->dev; - processed = 0; - - /* don't scan ring further than number of refilled - * descriptor */ - if (budget > priv->rx_desc_count) - budget = priv->rx_desc_count; - - do { - struct bcm_enet_desc *desc; - struct sk_buff *skb; - int desc_idx; - u32 len_stat; - unsigned int len; - - desc_idx = priv->rx_curr_desc; - desc = &priv->rx_desc_cpu[desc_idx]; - - /* make sure we actually read the descriptor status at - * each loop */ - rmb(); - - len_stat = desc->len_stat; - - /* break if dma ownership belongs to hw */ - if (len_stat & DMADESC_OWNER_MASK) - break; - - processed++; - priv->rx_curr_desc++; - if (priv->rx_curr_desc == priv->rx_ring_size) - priv->rx_curr_desc = 0; - priv->rx_desc_count--; - - /* if the packet does not have start of packet _and_ - * end of packet flag set, then just recycle it */ - if ((len_stat & DMADESC_ESOP_MASK) != DMADESC_ESOP_MASK) { - priv->stats.rx_dropped++; - continue; - } - - /* recycle packet if it's marked as bad */ - if (unlikely(len_stat & DMADESC_ERR_MASK)) { - priv->stats.rx_errors++; - - if (len_stat & DMADESC_OVSIZE_MASK) - priv->stats.rx_length_errors++; - if (len_stat & DMADESC_CRC_MASK) - priv->stats.rx_crc_errors++; - if (len_stat & DMADESC_UNDER_MASK) - priv->stats.rx_frame_errors++; - if (len_stat & DMADESC_OV_MASK) - priv->stats.rx_fifo_errors++; - continue; - } - - /* valid packet */ - skb = priv->rx_skb[desc_idx]; - len = (len_stat & DMADESC_LENGTH_MASK) >> DMADESC_LENGTH_SHIFT; - /* don't include FCS */ - len -= 4; - - if (len < copybreak) { - struct sk_buff *nskb; - - nskb = netdev_alloc_skb(dev, len + 2); - if (!nskb) { - /* forget packet, just rearm desc */ - priv->stats.rx_dropped++; - continue; - } - - /* since we're copying the data, we can align - * them properly */ - skb_reserve(nskb, NET_IP_ALIGN); - dma_sync_single_for_cpu(kdev, desc->address, - len, DMA_FROM_DEVICE); - memcpy(nskb->data, skb->data, len); - dma_sync_single_for_device(kdev, desc->address, - len, DMA_FROM_DEVICE); - skb = nskb; - } else { - dma_unmap_single(&priv->pdev->dev, desc->address, - priv->rx_skb_size, DMA_FROM_DEVICE); - priv->rx_skb[desc_idx] = NULL; - } - - skb_put(skb, len); - skb->dev = dev; - skb->protocol = eth_type_trans(skb, dev); - priv->stats.rx_packets++; - priv->stats.rx_bytes += len; - dev->last_rx = jiffies; - netif_receive_skb(skb); - - } while (--budget > 0); - - if (processed || !priv->rx_desc_count) { - bcm_enet_refill_rx(dev); - - /* kick rx dma */ - enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, - ENETDMA_CHANCFG_REG(priv->rx_chan)); - } - - return processed; -} - - -/* - * try to or force reclaim of transmitted buffers - */ -static int bcm_enet_tx_reclaim(struct net_device *dev, int force) -{ - struct bcm_enet_priv *priv; - int released; - - priv = netdev_priv(dev); - released = 0; - - while (priv->tx_desc_count < priv->tx_ring_size) { - struct bcm_enet_desc *desc; - struct sk_buff *skb; - - /* We run in a bh and fight against start_xmit, which - * is called with bh disabled */ - spin_lock(&priv->tx_lock); - - desc = &priv->tx_desc_cpu[priv->tx_dirty_desc]; - - if (!force && (desc->len_stat & DMADESC_OWNER_MASK)) { - spin_unlock(&priv->tx_lock); - break; - } - - /* ensure other field of the descriptor were not read - * before we checked ownership */ - rmb(); - - skb = priv->tx_skb[priv->tx_dirty_desc]; - priv->tx_skb[priv->tx_dirty_desc] = NULL; - dma_unmap_single(&priv->pdev->dev, desc->address, skb->len, - DMA_TO_DEVICE); - - priv->tx_dirty_desc++; - if (priv->tx_dirty_desc == priv->tx_ring_size) - priv->tx_dirty_desc = 0; - priv->tx_desc_count++; - - spin_unlock(&priv->tx_lock); - - if (desc->len_stat & DMADESC_UNDER_MASK) - priv->stats.tx_errors++; - - dev_kfree_skb(skb); - released++; - } - - if (netif_queue_stopped(dev) && released) - netif_wake_queue(dev); - - return released; -} - -/* - * poll func, called by network core - */ -static int bcm_enet_poll(struct napi_struct *napi, int budget) -{ - struct bcm_enet_priv *priv; - struct net_device *dev; - int tx_work_done, rx_work_done; - - priv = container_of(napi, struct bcm_enet_priv, napi); - dev = priv->net_dev; - - /* ack interrupts */ - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IR_REG(priv->rx_chan)); - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IR_REG(priv->tx_chan)); - - /* reclaim sent skb */ - tx_work_done = bcm_enet_tx_reclaim(dev, 0); - - spin_lock(&priv->rx_lock); - rx_work_done = bcm_enet_receive_queue(dev, budget); - spin_unlock(&priv->rx_lock); - - if (rx_work_done >= budget || tx_work_done > 0) { - /* rx/tx queue is not yet empty/clean */ - return rx_work_done; - } - - /* no more packet in rx/tx queue, remove device from poll - * queue */ -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) - netif_rx_complete(dev, napi); -#else - napi_complete(napi); -#endif - - /* restore rx/tx interrupt */ - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IRMASK_REG(priv->rx_chan)); - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IRMASK_REG(priv->tx_chan)); - - return rx_work_done; -} - -/* - * mac interrupt handler - */ -static irqreturn_t bcm_enet_isr_mac(int irq, void *dev_id) -{ - struct net_device *dev; - struct bcm_enet_priv *priv; - u32 stat; - - dev = dev_id; - priv = netdev_priv(dev); - - stat = enet_readl(priv, ENET_IR_REG); - if (!(stat & ENET_IR_MIB)) - return IRQ_NONE; - - /* clear & mask interrupt */ - enet_writel(priv, ENET_IR_MIB, ENET_IR_REG); - enet_writel(priv, 0, ENET_IRMASK_REG); - - /* read mib registers in workqueue */ - schedule_work(&priv->mib_update_task); - - return IRQ_HANDLED; -} - -/* - * rx/tx dma interrupt handler - */ -static irqreturn_t bcm_enet_isr_dma(int irq, void *dev_id) -{ - struct net_device *dev; - struct bcm_enet_priv *priv; - - dev = dev_id; - priv = netdev_priv(dev); - - /* mask rx/tx interrupts */ - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,30) - netif_rx_schedule(dev, &priv->napi); -#else - napi_schedule(&priv->napi); -#endif - - return IRQ_HANDLED; -} - -/* - * tx request callback - */ -static int bcm_enet_start_xmit(struct sk_buff *skb, struct net_device *dev) -{ - struct bcm_enet_priv *priv; - struct bcm_enet_desc *desc; - u32 len_stat; - int ret; - - priv = netdev_priv(dev); - - /* lock against tx reclaim */ - spin_lock(&priv->tx_lock); - - /* make sure the tx hw queue is not full, should not happen - * since we stop queue before it's the case */ - if (unlikely(!priv->tx_desc_count)) { - netif_stop_queue(dev); - dev_err(&priv->pdev->dev, "xmit called with no tx desc " - "available?\n"); - ret = NETDEV_TX_BUSY; - goto out_unlock; - } - - /* point to the next available desc */ - desc = &priv->tx_desc_cpu[priv->tx_curr_desc]; - priv->tx_skb[priv->tx_curr_desc] = skb; - - /* fill descriptor */ - desc->address = dma_map_single(&priv->pdev->dev, skb->data, skb->len, - DMA_TO_DEVICE); - - len_stat = (skb->len << DMADESC_LENGTH_SHIFT) & DMADESC_LENGTH_MASK; - len_stat |= DMADESC_ESOP_MASK | - DMADESC_APPEND_CRC | - DMADESC_OWNER_MASK; - - priv->tx_curr_desc++; - if (priv->tx_curr_desc == priv->tx_ring_size) { - priv->tx_curr_desc = 0; - len_stat |= DMADESC_WRAP_MASK; - } - priv->tx_desc_count--; - - /* dma might be already polling, make sure we update desc - * fields in correct order */ - wmb(); - desc->len_stat = len_stat; - wmb(); - - /* kick tx dma */ - enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, - ENETDMA_CHANCFG_REG(priv->tx_chan)); - - /* stop queue if no more desc available */ - if (!priv->tx_desc_count) - netif_stop_queue(dev); - - priv->stats.tx_bytes += skb->len; - priv->stats.tx_packets++; - dev->trans_start = jiffies; - ret = NETDEV_TX_OK; - -out_unlock: - spin_unlock(&priv->tx_lock); - return ret; -} - -/* - * Change the interface's mac address. - */ -static int bcm_enet_set_mac_address(struct net_device *dev, void *p) -{ - struct bcm_enet_priv *priv; - struct sockaddr *addr = p; - u32 val; - - priv = netdev_priv(dev); - memcpy(dev->dev_addr, addr->sa_data, ETH_ALEN); - - /* use perfect match register 0 to store my mac address */ - val = (dev->dev_addr[2] << 24) | (dev->dev_addr[3] << 16) | - (dev->dev_addr[4] << 8) | dev->dev_addr[5]; - enet_writel(priv, val, ENET_PML_REG(0)); - - val = (dev->dev_addr[0] << 8 | dev->dev_addr[1]); - val |= ENET_PMH_DATAVALID_MASK; - enet_writel(priv, val, ENET_PMH_REG(0)); - - return 0; -} - -/* - * Change rx mode (promiscous/allmulti) and update multicast list - */ -static void bcm_enet_set_multicast_list(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - struct dev_mc_list *mc_list; - u32 val; - int i; - - priv = netdev_priv(dev); - - val = enet_readl(priv, ENET_RXCFG_REG); - - if (dev->flags & IFF_PROMISC) - val |= ENET_RXCFG_PROMISC_MASK; - else - val &= ~ENET_RXCFG_PROMISC_MASK; - - /* only 3 perfect match registers left, first one is used for - * own mac address */ - if ((dev->flags & IFF_ALLMULTI) || dev->mc_count > 3) - val |= ENET_RXCFG_ALLMCAST_MASK; - else - val &= ~ENET_RXCFG_ALLMCAST_MASK; - - /* no need to set perfect match registers if we catch all - * multicast */ - if (val & ENET_RXCFG_ALLMCAST_MASK) { - enet_writel(priv, val, ENET_RXCFG_REG); - return; - } - - for (i = 0, mc_list = dev->mc_list; - (mc_list != NULL) && (i < dev->mc_count) && (i < 3); - i++, mc_list = mc_list->next) { - u8 *dmi_addr; - u32 tmp; - - /* filter non ethernet address */ - if (mc_list->dmi_addrlen != 6) - continue; - - /* update perfect match registers */ - dmi_addr = mc_list->dmi_addr; - tmp = (dmi_addr[2] << 24) | (dmi_addr[3] << 16) | - (dmi_addr[4] << 8) | dmi_addr[5]; - enet_writel(priv, tmp, ENET_PML_REG(i + 1)); - - tmp = (dmi_addr[0] << 8 | dmi_addr[1]); - tmp |= ENET_PMH_DATAVALID_MASK; - enet_writel(priv, tmp, ENET_PMH_REG(i + 1)); - } - - for (; i < 3; i++) { - enet_writel(priv, 0, ENET_PML_REG(i + 1)); - enet_writel(priv, 0, ENET_PMH_REG(i + 1)); - } - - enet_writel(priv, val, ENET_RXCFG_REG); -} - -/* - * set mac duplex parameters - */ -static void bcm_enet_set_duplex(struct bcm_enet_priv *priv, int fullduplex) -{ - u32 val; - - val = enet_readl(priv, ENET_TXCTL_REG); - if (fullduplex) - val |= ENET_TXCTL_FD_MASK; - else - val &= ~ENET_TXCTL_FD_MASK; - enet_writel(priv, val, ENET_TXCTL_REG); -} - -/* - * set mac flow control parameters - */ -static void bcm_enet_set_flow(struct bcm_enet_priv *priv, int rx_en, int tx_en) -{ - u32 val; - - /* rx flow control (pause frame handling) */ - val = enet_readl(priv, ENET_RXCFG_REG); - if (rx_en) - val |= ENET_RXCFG_ENFLOW_MASK; - else - val &= ~ENET_RXCFG_ENFLOW_MASK; - enet_writel(priv, val, ENET_RXCFG_REG); - - /* tx flow control (pause frame generation) */ - val = enet_dma_readl(priv, ENETDMA_CFG_REG); - if (tx_en) - val |= ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan); - else - val &= ~ENETDMA_CFG_FLOWCH_MASK(priv->rx_chan); - enet_dma_writel(priv, val, ENETDMA_CFG_REG); -} - -/* - * link changed callback (from phylib) - */ -static void bcm_enet_adjust_phy_link(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - struct phy_device *phydev; - int status_changed; - - priv = netdev_priv(dev); - phydev = priv->phydev; - status_changed = 0; - - if (priv->old_link != phydev->link) { - status_changed = 1; - priv->old_link = phydev->link; - } - - /* reflect duplex change in mac configuration */ - if (phydev->link && phydev->duplex != priv->old_duplex) { - bcm_enet_set_duplex(priv, - (phydev->duplex == DUPLEX_FULL) ? 1 : 0); - status_changed = 1; - priv->old_duplex = phydev->duplex; - } - - /* enable flow control if remote advertise it (trust phylib to - * check that duplex is full */ - if (phydev->link && phydev->pause != priv->old_pause) { - int rx_pause_en, tx_pause_en; - - if (phydev->pause) { - /* pause was advertised by lpa and us */ - rx_pause_en = 1; - tx_pause_en = 1; - } else if (!priv->pause_auto) { - /* pause setting overrided by user */ - rx_pause_en = priv->pause_rx; - tx_pause_en = priv->pause_tx; - } else { - rx_pause_en = 0; - tx_pause_en = 0; - } - - bcm_enet_set_flow(priv, rx_pause_en, tx_pause_en); - status_changed = 1; - priv->old_pause = phydev->pause; - } - - if (status_changed) { - pr_info("%s: link %s", dev->name, phydev->link ? - "UP" : "DOWN"); - if (phydev->link) - printk(" - %d/%s - flow control %s", phydev->speed, - DUPLEX_FULL == phydev->duplex ? "full" : "half", - phydev->pause == 1 ? "rx&tx" : "off"); - - printk("\n"); - } -} - -/* - * link changed callback (if phylib is not used) - */ -static void bcm_enet_adjust_link(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - bcm_enet_set_duplex(priv, priv->force_duplex_full); - bcm_enet_set_flow(priv, priv->pause_rx, priv->pause_tx); - - pr_info("%s: link forced UP - %d/%s - flow control %s/%s\n", - dev->name, - priv->force_speed_100 ? 100 : 10, - priv->force_duplex_full ? "full" : "half", - priv->pause_rx ? "rx" : "off", - priv->pause_tx ? "tx" : "off"); -} - -/* - * open callback, allocate dma rings & buffers and start rx operation - */ -static int bcm_enet_open(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - struct sockaddr addr; - struct device *kdev; - struct phy_device *phydev; - int irq_requested, i, ret; - unsigned int size; - char phy_id[BUS_ID_SIZE]; - void *p; - u32 val; - - priv = netdev_priv(dev); - priv->rx_desc_cpu = priv->tx_desc_cpu = NULL; - priv->rx_skb = priv->tx_skb = NULL; - - kdev = &priv->pdev->dev; - - if (priv->has_phy) { - /* connect to PHY */ - snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, - priv->mac_id ? "1" : "0", priv->phy_id); - - phydev = phy_connect(dev, phy_id, &bcm_enet_adjust_phy_link, 0, - PHY_INTERFACE_MODE_MII); - - if (IS_ERR(phydev)) { - dev_err(kdev, "could not attach to PHY\n"); - return PTR_ERR(phydev); - } - - /* mask with MAC supported features */ - phydev->supported &= (SUPPORTED_10baseT_Half | - SUPPORTED_10baseT_Full | - SUPPORTED_100baseT_Half | - SUPPORTED_100baseT_Full | - SUPPORTED_Autoneg | - SUPPORTED_Pause | - SUPPORTED_MII); - phydev->advertising = phydev->supported; - - if (priv->pause_auto && priv->pause_rx && priv->pause_tx) - phydev->advertising |= SUPPORTED_Pause; - else - phydev->advertising &= ~SUPPORTED_Pause; - - dev_info(kdev, "attached PHY at address %d [%s]\n", - phydev->addr, phydev->drv->name); - - priv->old_link = 0; - priv->old_duplex = -1; - priv->old_pause = -1; - priv->phydev = phydev; - } - - /* mask all interrupts and request them */ - enet_writel(priv, 0, ENET_IRMASK_REG); - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); - - irq_requested = 0; - ret = request_irq(dev->irq, bcm_enet_isr_mac, 0, dev->name, dev); - if (ret) - goto out; - irq_requested++; - - ret = request_irq(priv->irq_rx, bcm_enet_isr_dma, - IRQF_SAMPLE_RANDOM | IRQF_DISABLED, dev->name, dev); - if (ret) - goto out; - irq_requested++; - - ret = request_irq(priv->irq_tx, bcm_enet_isr_dma, - IRQF_DISABLED, dev->name, dev); - if (ret) - goto out; - irq_requested++; - - /* initialize perfect match registers */ - for (i = 0; i < 4; i++) { - enet_writel(priv, 0, ENET_PML_REG(i)); - enet_writel(priv, 0, ENET_PMH_REG(i)); - } - - /* write device mac address */ - memcpy(addr.sa_data, dev->dev_addr, ETH_ALEN); - bcm_enet_set_mac_address(dev, &addr); - - /* allocate rx dma ring */ - size = priv->rx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_alloc_coherent(kdev, size, &priv->rx_desc_dma, GFP_KERNEL); - if (!p) { - dev_err(kdev, "cannot allocate rx ring %u\n", size); - ret = -ENOMEM; - goto out; - } - - memset(p, 0, size); - priv->rx_desc_alloc_size = size; - priv->rx_desc_cpu = p; - - /* allocate tx dma ring */ - size = priv->tx_ring_size * sizeof(struct bcm_enet_desc); - p = dma_alloc_coherent(kdev, size, &priv->tx_desc_dma, GFP_KERNEL); - if (!p) { - dev_err(kdev, "cannot allocate tx ring\n"); - ret = -ENOMEM; - goto out; - } - - memset(p, 0, size); - priv->tx_desc_alloc_size = size; - priv->tx_desc_cpu = p; - - priv->tx_skb = kzalloc(sizeof(struct sk_buff *) * priv->tx_ring_size, - GFP_KERNEL); - if (!priv->tx_skb) { - dev_err(kdev, "cannot allocate rx skb queue\n"); - ret = -ENOMEM; - goto out; - } - - priv->tx_desc_count = priv->tx_ring_size; - priv->tx_dirty_desc = 0; - priv->tx_curr_desc = 0; - spin_lock_init(&priv->tx_lock); - - /* init & fill rx ring with skbs */ - priv->rx_skb = kzalloc(sizeof(struct sk_buff *) * priv->rx_ring_size, - GFP_KERNEL); - if (!priv->rx_skb) { - dev_err(kdev, "cannot allocate rx skb queue\n"); - ret = -ENOMEM; - goto out; - } - - priv->rx_desc_count = 0; - priv->rx_dirty_desc = 0; - priv->rx_curr_desc = 0; - - /* initialize flow control buffer allocation */ - enet_dma_writel(priv, ENETDMA_BUFALLOC_FORCE_MASK | 0, - ENETDMA_BUFALLOC_REG(priv->rx_chan)); - - if (bcm_enet_refill_rx(dev)) { - dev_err(kdev, "cannot allocate rx skb queue\n"); - ret = -ENOMEM; - goto out; - } - - /* write rx & tx ring addresses */ - enet_dma_writel(priv, priv->rx_desc_dma, - ENETDMA_RSTART_REG(priv->rx_chan)); - enet_dma_writel(priv, priv->tx_desc_dma, - ENETDMA_RSTART_REG(priv->tx_chan)); - - /* clear remaining state ram for rx & tx channel */ - enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_SRAM2_REG(priv->tx_chan)); - enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_SRAM3_REG(priv->tx_chan)); - enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_SRAM4_REG(priv->tx_chan)); - - /* set max rx/tx length */ - enet_writel(priv, priv->hw_mtu, ENET_RXMAXLEN_REG); - enet_writel(priv, priv->hw_mtu, ENET_TXMAXLEN_REG); - - /* set dma maximum burst len */ - enet_dma_writel(priv, BCMENET_DMA_MAXBURST, - ENETDMA_MAXBURST_REG(priv->rx_chan)); - enet_dma_writel(priv, BCMENET_DMA_MAXBURST, - ENETDMA_MAXBURST_REG(priv->tx_chan)); - - /* set correct transmit fifo watermark */ - enet_writel(priv, BCMENET_TX_FIFO_TRESH, ENET_TXWMARK_REG); - - /* set flow control low/high threshold to 1/3 / 2/3 */ - val = priv->rx_ring_size / 3; - enet_dma_writel(priv, val, ENETDMA_FLOWCL_REG(priv->rx_chan)); - val = (priv->rx_ring_size * 2) / 3; - enet_dma_writel(priv, val, ENETDMA_FLOWCH_REG(priv->rx_chan)); - - /* all set, enable mac and interrupts, start dma engine and - * kick rx dma channel */ - wmb(); - enet_writel(priv, ENET_CTL_ENABLE_MASK, ENET_CTL_REG); - enet_dma_writel(priv, ENETDMA_CFG_EN_MASK, ENETDMA_CFG_REG); - enet_dma_writel(priv, ENETDMA_CHANCFG_EN_MASK, - ENETDMA_CHANCFG_REG(priv->rx_chan)); - - /* watch "mib counters about to overflow" interrupt */ - enet_writel(priv, ENET_IR_MIB, ENET_IR_REG); - enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG); - - /* watch "packet transferred" interrupt in rx and tx */ - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IR_REG(priv->rx_chan)); - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IR_REG(priv->tx_chan)); - - /* make sure we enable napi before rx interrupt */ - napi_enable(&priv->napi); - - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IRMASK_REG(priv->rx_chan)); - enet_dma_writel(priv, ENETDMA_IR_PKTDONE_MASK, - ENETDMA_IRMASK_REG(priv->tx_chan)); - - if (priv->has_phy) - phy_start(priv->phydev); - else - bcm_enet_adjust_link(dev); - - netif_start_queue(dev); - return 0; - -out: - phy_disconnect(priv->phydev); - if (irq_requested > 2) - free_irq(priv->irq_tx, dev); - if (irq_requested > 1) - free_irq(priv->irq_rx, dev); - if (irq_requested > 0) - free_irq(dev->irq, dev); - for (i = 0; i < priv->rx_ring_size; i++) { - struct bcm_enet_desc *desc; - - if (!priv->rx_skb[i]) - continue; - - desc = &priv->rx_desc_cpu[i]; - dma_unmap_single(kdev, desc->address, priv->rx_skb_size, - DMA_FROM_DEVICE); - kfree_skb(priv->rx_skb[i]); - } - if (priv->rx_desc_cpu) - dma_free_coherent(kdev, priv->rx_desc_alloc_size, - priv->rx_desc_cpu, priv->rx_desc_dma); - if (priv->tx_desc_cpu) - dma_free_coherent(kdev, priv->tx_desc_alloc_size, - priv->tx_desc_cpu, priv->tx_desc_dma); - kfree(priv->rx_skb); - kfree(priv->tx_skb); - return ret; -} - -/* - * disable mac - */ -static void bcm_enet_disable_mac(struct bcm_enet_priv *priv) -{ - int limit; - u32 val; - - val = enet_readl(priv, ENET_CTL_REG); - val |= ENET_CTL_DISABLE_MASK; - enet_writel(priv, val, ENET_CTL_REG); - - limit = 1000; - do { - u32 val; - - val = enet_readl(priv, ENET_CTL_REG); - if (!(val & ENET_CTL_DISABLE_MASK)) - break; - udelay(1); - } while (limit--); -} - -/* - * disable dma in given channel - */ -static void bcm_enet_disable_dma(struct bcm_enet_priv *priv, int chan) -{ - int limit; - - enet_dma_writel(priv, 0, ENETDMA_CHANCFG_REG(chan)); - - limit = 1000; - do { - u32 val; - - val = enet_dma_readl(priv, ENETDMA_CHANCFG_REG(chan)); - if (!(val & ENETDMA_CHANCFG_EN_MASK)) - break; - udelay(1); - } while (limit--); -} - -/* - * stop callback - */ -static int bcm_enet_stop(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - struct device *kdev; - int i; - - priv = netdev_priv(dev); - kdev = &priv->pdev->dev; - - netif_stop_queue(dev); - napi_disable(&priv->napi); - if (priv->has_phy) - phy_stop(priv->phydev); - del_timer_sync(&priv->rx_timeout); - - /* mask all interrupts */ - enet_writel(priv, 0, ENET_IRMASK_REG); - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->rx_chan)); - enet_dma_writel(priv, 0, ENETDMA_IRMASK_REG(priv->tx_chan)); - - /* make sure no mib update is scheduled */ - flush_scheduled_work(); - - /* disable dma & mac */ - bcm_enet_disable_dma(priv, priv->tx_chan); - bcm_enet_disable_dma(priv, priv->rx_chan); - bcm_enet_disable_mac(priv); - - /* force reclaim of all tx buffers */ - bcm_enet_tx_reclaim(dev, 1); - - /* free the rx skb ring */ - for (i = 0; i < priv->rx_ring_size; i++) { - struct bcm_enet_desc *desc; - - if (!priv->rx_skb[i]) - continue; - - desc = &priv->rx_desc_cpu[i]; - dma_unmap_single(kdev, desc->address, priv->rx_skb_size, - DMA_FROM_DEVICE); - kfree_skb(priv->rx_skb[i]); - } - - /* free remaining allocated memory */ - kfree(priv->rx_skb); - kfree(priv->tx_skb); - dma_free_coherent(kdev, priv->rx_desc_alloc_size, - priv->rx_desc_cpu, priv->rx_desc_dma); - dma_free_coherent(kdev, priv->tx_desc_alloc_size, - priv->tx_desc_cpu, priv->tx_desc_dma); - free_irq(priv->irq_tx, dev); - free_irq(priv->irq_rx, dev); - free_irq(dev->irq, dev); - - /* release phy */ - if (priv->has_phy) { - phy_disconnect(priv->phydev); - priv->phydev = NULL; - } - - return 0; -} - -/* - * core request to return device rx/tx stats - */ -static struct net_device_stats *bcm_enet_get_stats(struct net_device *dev) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - return &priv->stats; -} - -/* - * ethtool callbacks - */ -struct bcm_enet_stats { - char stat_string[ETH_GSTRING_LEN]; - int sizeof_stat; - int stat_offset; - int mib_reg; -}; - -#define GEN_STAT(m) sizeof(((struct bcm_enet_priv *)0)->m), \ - offsetof(struct bcm_enet_priv, m) - -static const struct bcm_enet_stats bcm_enet_gstrings_stats[] = { - { "rx_packets", GEN_STAT(stats.rx_packets), -1 }, - { "tx_packets", GEN_STAT(stats.tx_packets), -1 }, - { "rx_bytes", GEN_STAT(stats.rx_bytes), -1 }, - { "tx_bytes", GEN_STAT(stats.tx_bytes), -1 }, - { "rx_errors", GEN_STAT(stats.rx_errors), -1 }, - { "tx_errors", GEN_STAT(stats.tx_errors), -1 }, - { "rx_dropped", GEN_STAT(stats.rx_dropped), -1 }, - { "tx_dropped", GEN_STAT(stats.tx_dropped), -1 }, - - { "rx_good_octets", GEN_STAT(mib.rx_gd_octets), ETH_MIB_RX_GD_OCTETS}, - { "rx_good_pkts", GEN_STAT(mib.rx_gd_pkts), ETH_MIB_RX_GD_PKTS }, - { "rx_broadcast", GEN_STAT(mib.rx_brdcast), ETH_MIB_RX_BRDCAST }, - { "rx_multicast", GEN_STAT(mib.rx_mult), ETH_MIB_RX_MULT }, - { "rx_64_octets", GEN_STAT(mib.rx_64), ETH_MIB_RX_64 }, - { "rx_65_127_oct", GEN_STAT(mib.rx_65_127), ETH_MIB_RX_65_127 }, - { "rx_128_255_oct", GEN_STAT(mib.rx_128_255), ETH_MIB_RX_128_255 }, - { "rx_256_511_oct", GEN_STAT(mib.rx_256_511), ETH_MIB_RX_256_511 }, - { "rx_512_1023_oct", GEN_STAT(mib.rx_512_1023), ETH_MIB_RX_512_1023 }, - { "rx_1024_max_oct", GEN_STAT(mib.rx_1024_max), ETH_MIB_RX_1024_MAX }, - { "rx_jabber", GEN_STAT(mib.rx_jab), ETH_MIB_RX_JAB }, - { "rx_oversize", GEN_STAT(mib.rx_ovr), ETH_MIB_RX_OVR }, - { "rx_fragment", GEN_STAT(mib.rx_frag), ETH_MIB_RX_FRAG }, - { "rx_dropped", GEN_STAT(mib.rx_drop), ETH_MIB_RX_DROP }, - { "rx_crc_align", GEN_STAT(mib.rx_crc_align), ETH_MIB_RX_CRC_ALIGN }, - { "rx_undersize", GEN_STAT(mib.rx_und), ETH_MIB_RX_UND }, - { "rx_crc", GEN_STAT(mib.rx_crc), ETH_MIB_RX_CRC }, - { "rx_align", GEN_STAT(mib.rx_align), ETH_MIB_RX_ALIGN }, - { "rx_symbol_error", GEN_STAT(mib.rx_sym), ETH_MIB_RX_SYM }, - { "rx_pause", GEN_STAT(mib.rx_pause), ETH_MIB_RX_PAUSE }, - { "rx_control", GEN_STAT(mib.rx_cntrl), ETH_MIB_RX_CNTRL }, - - { "tx_good_octets", GEN_STAT(mib.tx_gd_octets), ETH_MIB_TX_GD_OCTETS }, - { "tx_good_pkts", GEN_STAT(mib.tx_gd_pkts), ETH_MIB_TX_GD_PKTS }, - { "tx_broadcast", GEN_STAT(mib.tx_brdcast), ETH_MIB_TX_BRDCAST }, - { "tx_multicast", GEN_STAT(mib.tx_mult), ETH_MIB_TX_MULT }, - { "tx_64_oct", GEN_STAT(mib.tx_64), ETH_MIB_TX_64 }, - { "tx_65_127_oct", GEN_STAT(mib.tx_65_127), ETH_MIB_TX_65_127 }, - { "tx_128_255_oct", GEN_STAT(mib.tx_128_255), ETH_MIB_TX_128_255 }, - { "tx_256_511_oct", GEN_STAT(mib.tx_256_511), ETH_MIB_TX_256_511 }, - { "tx_512_1023_oct", GEN_STAT(mib.tx_512_1023), ETH_MIB_TX_512_1023}, - { "tx_1024_max_oct", GEN_STAT(mib.tx_1024_max), ETH_MIB_TX_1024_MAX }, - { "tx_jabber", GEN_STAT(mib.tx_jab), ETH_MIB_TX_JAB }, - { "tx_oversize", GEN_STAT(mib.tx_ovr), ETH_MIB_TX_OVR }, - { "tx_fragment", GEN_STAT(mib.tx_frag), ETH_MIB_TX_FRAG }, - { "tx_underrun", GEN_STAT(mib.tx_underrun), ETH_MIB_TX_UNDERRUN }, - { "tx_collisions", GEN_STAT(mib.tx_col), ETH_MIB_TX_COL }, - { "tx_single_collision", GEN_STAT(mib.tx_1_col), ETH_MIB_TX_1_COL }, - { "tx_multiple_collision", GEN_STAT(mib.tx_m_col), ETH_MIB_TX_M_COL }, - { "tx_excess_collision", GEN_STAT(mib.tx_ex_col), ETH_MIB_TX_EX_COL }, - { "tx_late_collision", GEN_STAT(mib.tx_late), ETH_MIB_TX_LATE }, - { "tx_deferred", GEN_STAT(mib.tx_def), ETH_MIB_TX_DEF }, - { "tx_carrier_sense", GEN_STAT(mib.tx_crs), ETH_MIB_TX_CRS }, - { "tx_pause", GEN_STAT(mib.tx_pause), ETH_MIB_TX_PAUSE }, - -}; - -#define BCM_ENET_STATS_LEN \ - (sizeof(bcm_enet_gstrings_stats) / sizeof(struct bcm_enet_stats)) - -static const u32 unused_mib_regs[] = { - ETH_MIB_TX_ALL_OCTETS, - ETH_MIB_TX_ALL_PKTS, - ETH_MIB_RX_ALL_OCTETS, - ETH_MIB_RX_ALL_PKTS, -}; - - -static void bcm_enet_get_drvinfo(struct net_device *netdev, - struct ethtool_drvinfo *drvinfo) -{ - strncpy(drvinfo->driver, bcm_enet_driver_name, 32); - strncpy(drvinfo->version, bcm_enet_driver_version, 32); - strncpy(drvinfo->fw_version, "N/A", 32); - strncpy(drvinfo->bus_info, "bcm63xx", 32); - drvinfo->n_stats = BCM_ENET_STATS_LEN; -} - -static int bcm_enet_get_stats_count(struct net_device *netdev) -{ - return BCM_ENET_STATS_LEN; -} - -static void bcm_enet_get_strings(struct net_device *netdev, - u32 stringset, u8 *data) -{ - int i; - - switch (stringset) { - case ETH_SS_STATS: - for (i = 0; i < BCM_ENET_STATS_LEN; i++) { - memcpy(data + i * ETH_GSTRING_LEN, - bcm_enet_gstrings_stats[i].stat_string, - ETH_GSTRING_LEN); - } - break; - } -} - -static void update_mib_counters(struct bcm_enet_priv *priv) -{ - int i; - - for (i = 0; i < BCM_ENET_STATS_LEN; i++) { - const struct bcm_enet_stats *s; - u32 val; - char *p; - - s = &bcm_enet_gstrings_stats[i]; - if (s->mib_reg == -1) - continue; - - val = enet_readl(priv, ENET_MIB_REG(s->mib_reg)); - p = (char *)priv + s->stat_offset; - - if (s->sizeof_stat == sizeof(u64)) - *(u64 *)p += val; - else - *(u32 *)p += val; - } - - /* also empty unused mib counters to make sure mib counter - * overflow interrupt is cleared */ - for (i = 0; i < ARRAY_SIZE(unused_mib_regs); i++) - (void)enet_readl(priv, ENET_MIB_REG(unused_mib_regs[i])); -} - -static void bcm_enet_update_mib_counters_defer(struct work_struct *t) -{ - struct bcm_enet_priv *priv; - - priv = container_of(t, struct bcm_enet_priv, mib_update_task); - mutex_lock(&priv->mib_update_lock); - update_mib_counters(priv); - mutex_unlock(&priv->mib_update_lock); - - /* reenable mib interrupt */ - if (netif_running(priv->net_dev)) - enet_writel(priv, ENET_IR_MIB, ENET_IRMASK_REG); -} - -static void bcm_enet_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, - u64 *data) -{ - struct bcm_enet_priv *priv; - int i; - - priv = netdev_priv(netdev); - - mutex_lock(&priv->mib_update_lock); - update_mib_counters(priv); - - for (i = 0; i < BCM_ENET_STATS_LEN; i++) { - const struct bcm_enet_stats *s; - char *p; - - s = &bcm_enet_gstrings_stats[i]; - p = (char *)priv + s->stat_offset; - data[i] = (s->sizeof_stat == sizeof(u64)) ? - *(u64 *)p : *(u32 *)p; - } - mutex_unlock(&priv->mib_update_lock); -} - -static int bcm_enet_get_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - - cmd->maxrxpkt = 0; - cmd->maxtxpkt = 0; - - if (priv->has_phy) { - if (!priv->phydev) - return -ENODEV; - return phy_ethtool_gset(priv->phydev, cmd); - } else { - cmd->autoneg = 0; - cmd->speed = (priv->force_speed_100) ? SPEED_100 : SPEED_10; - cmd->duplex = (priv->force_duplex_full) ? - DUPLEX_FULL : DUPLEX_HALF; - cmd->supported = ADVERTISED_10baseT_Half | - ADVERTISED_10baseT_Full | - ADVERTISED_100baseT_Half | - ADVERTISED_100baseT_Full; - cmd->advertising = 0; - cmd->port = PORT_MII; - cmd->transceiver = XCVR_EXTERNAL; - } - return 0; -} - -static int bcm_enet_set_settings(struct net_device *dev, - struct ethtool_cmd *cmd) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - if (priv->has_phy) { - if (!priv->phydev) - return -ENODEV; - return phy_ethtool_sset(priv->phydev, cmd); - } else { - - if (cmd->autoneg || - (cmd->speed != SPEED_100 && cmd->speed != SPEED_10) || - cmd->port != PORT_MII) - return -EINVAL; - - priv->force_speed_100 = (cmd->speed == SPEED_100) ? 1 : 0; - priv->force_duplex_full = (cmd->duplex == DUPLEX_FULL) ? 1 : 0; - - if (netif_running(dev)) - bcm_enet_adjust_link(dev); - return 0; - } -} - -static void bcm_enet_get_ringparam(struct net_device *dev, - struct ethtool_ringparam *ering) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - - /* rx/tx ring is actually only limited by memory */ - ering->rx_max_pending = 8192; - ering->tx_max_pending = 8192; - ering->rx_mini_max_pending = 0; - ering->rx_jumbo_max_pending = 0; - ering->rx_pending = priv->rx_ring_size; - ering->tx_pending = priv->tx_ring_size; -} - -static int bcm_enet_set_ringparam(struct net_device *dev, - struct ethtool_ringparam *ering) -{ - struct bcm_enet_priv *priv; - int was_running; - - priv = netdev_priv(dev); - - was_running = 0; - if (netif_running(dev)) { - bcm_enet_stop(dev); - was_running = 1; - } - - priv->rx_ring_size = ering->rx_pending; - priv->tx_ring_size = ering->tx_pending; - - if (was_running) { - int err; - - err = bcm_enet_open(dev); - if (err) - dev_close(dev); - else - bcm_enet_set_multicast_list(dev); - } - return 0; -} - -static void bcm_enet_get_pauseparam(struct net_device *dev, - struct ethtool_pauseparam *ecmd) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - ecmd->autoneg = priv->pause_auto; - ecmd->rx_pause = priv->pause_rx; - ecmd->tx_pause = priv->pause_tx; -} - -static int bcm_enet_set_pauseparam(struct net_device *dev, - struct ethtool_pauseparam *ecmd) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - - if (priv->has_phy) { - if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) { - /* asymetric pause mode not supported, - * actually possible but integrated PHY has RO - * asym_pause bit */ - return -EINVAL; - } - } else { - /* no pause autoneg on direct mii connection */ - if (ecmd->autoneg) - return -EINVAL; - } - - priv->pause_auto = ecmd->autoneg; - priv->pause_rx = ecmd->rx_pause; - priv->pause_tx = ecmd->tx_pause; - - return 0; -} - -static struct ethtool_ops bcm_enet_ethtool_ops = { - .get_strings = bcm_enet_get_strings, - .get_stats_count = bcm_enet_get_stats_count, - .get_ethtool_stats = bcm_enet_get_ethtool_stats, - .get_settings = bcm_enet_get_settings, - .set_settings = bcm_enet_set_settings, - .get_drvinfo = bcm_enet_get_drvinfo, - .get_link = ethtool_op_get_link, - .get_ringparam = bcm_enet_get_ringparam, - .set_ringparam = bcm_enet_set_ringparam, - .get_pauseparam = bcm_enet_get_pauseparam, - .set_pauseparam = bcm_enet_set_pauseparam, -}; - -static int bcm_enet_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) -{ - struct bcm_enet_priv *priv; - - priv = netdev_priv(dev); - if (priv->has_phy) { - if (!priv->phydev) - return -ENODEV; - return phy_mii_ioctl(priv->phydev, if_mii(rq), cmd); - } else { - struct mii_if_info mii; - - mii.dev = dev; - mii.mdio_read = bcm_enet_mdio_read_mii; - mii.mdio_write = bcm_enet_mdio_write_mii; - mii.phy_id = 0; - mii.phy_id_mask = 0x3f; - mii.reg_num_mask = 0x1f; - return generic_mii_ioctl(&mii, if_mii(rq), cmd, NULL); - } -} - -/* - * calculate actual hardware mtu - */ -static int compute_hw_mtu(struct bcm_enet_priv *priv, int mtu) -{ - int actual_mtu; - - actual_mtu = mtu; - - /* add ethernet header + vlan tag size */ - actual_mtu += VLAN_ETH_HLEN; - - if (actual_mtu < 64 || actual_mtu > BCMENET_MAX_MTU) - return -EINVAL; - - /* - * setup maximum size before we get overflow mark in - * descriptor, note that this will not prevent reception of - * big frames, they will be split into multiple buffers - * anyway - */ - priv->hw_mtu = actual_mtu; - - /* - * align rx buffer size to dma burst len, account FCS since - * it's appended - */ - priv->rx_skb_size = ALIGN(actual_mtu + ETH_FCS_LEN, - BCMENET_DMA_MAXBURST * 4); - return 0; -} - -/* - * adjust mtu, can't be called while device is running - */ -static int bcm_enet_change_mtu(struct net_device *dev, int new_mtu) -{ - int ret; - - if (netif_running(dev)) - return -EBUSY; - - ret = compute_hw_mtu(netdev_priv(dev), new_mtu); - if (ret) - return ret; - dev->mtu = new_mtu; - return 0; -} - -/* - * preinit hardware to allow mii operation while device is down - */ -static void bcm_enet_hw_preinit(struct bcm_enet_priv *priv) -{ - u32 val; - int limit; - - /* make sure mac is disabled */ - bcm_enet_disable_mac(priv); - - /* soft reset mac */ - val = ENET_CTL_SRESET_MASK; - enet_writel(priv, val, ENET_CTL_REG); - wmb(); - - limit = 1000; - do { - val = enet_readl(priv, ENET_CTL_REG); - if (!(val & ENET_CTL_SRESET_MASK)) - break; - udelay(1); - } while (limit--); - - /* select correct mii interface */ - val = enet_readl(priv, ENET_CTL_REG); - if (priv->use_external_mii) - val |= ENET_CTL_EPHYSEL_MASK; - else - val &= ~ENET_CTL_EPHYSEL_MASK; - enet_writel(priv, val, ENET_CTL_REG); - - /* turn on mdc clock */ - enet_writel(priv, (0x1f << ENET_MIISC_MDCFREQDIV_SHIFT) | - ENET_MIISC_PREAMBLEEN_MASK, ENET_MIISC_REG); - - /* set mib counters to self-clear when read */ - val = enet_readl(priv, ENET_MIBCTL_REG); - val |= ENET_MIBCTL_RDCLEAR_MASK; - enet_writel(priv, val, ENET_MIBCTL_REG); -} - -/* - * allocate netdevice, request register memory and register device. - */ -static int __devinit bcm_enet_probe(struct platform_device *pdev) -{ - struct bcm_enet_priv *priv; - struct net_device *dev; - struct bcm63xx_enet_platform_data *pd; - struct resource *res_mem, *res_irq, *res_irq_rx, *res_irq_tx; - struct mii_bus *bus; - const char *clk_name; - unsigned int iomem_size; - int i, ret, mdio_registered, mem_requested; - - /* stop if shared driver failed, assume driver->probe will be - * called in the same order we register devices (correct ?) */ - if (!bcm_enet_shared_base) - return -ENODEV; - - mdio_registered = mem_requested = 0; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - res_irq_rx = platform_get_resource(pdev, IORESOURCE_IRQ, 1); - res_irq_tx = platform_get_resource(pdev, IORESOURCE_IRQ, 2); - if (!res_mem || !res_irq || !res_irq_rx || !res_irq_tx) - return -ENODEV; - - ret = 0; - dev = alloc_etherdev(sizeof(*priv)); - if (!dev) - return -ENOMEM; - priv = netdev_priv(dev); - memset(priv, 0, sizeof(*priv)); - - ret = compute_hw_mtu(priv, dev->mtu); - if (ret) - goto out; - - iomem_size = res_mem->end - res_mem->start + 1; - if (!request_mem_region(res_mem->start, iomem_size, "bcm63xx_enet")) { - ret = -EBUSY; - goto err; - } - mem_requested = 1; - - priv->base = ioremap(res_mem->start, iomem_size); - if (priv->base == NULL) { - ret = -ENOMEM; - goto err; - } - dev->irq = priv->irq = res_irq->start; - priv->irq_rx = res_irq_rx->start; - priv->irq_tx = res_irq_tx->start; - priv->mac_id = pdev->id; - - /* get rx & tx dma channel id for this mac */ - if (priv->mac_id == 0) { - priv->rx_chan = 0; - priv->tx_chan = 1; - clk_name = "enet0"; - } else { - priv->rx_chan = 2; - priv->tx_chan = 3; - clk_name = "enet1"; - } - - priv->mac_clk = clk_get(&pdev->dev, clk_name); - if (IS_ERR(priv->mac_clk)) { - ret = PTR_ERR(priv->mac_clk); - priv->mac_clk = NULL; - goto err; - } - clk_enable(priv->mac_clk); - - /* initialize default and fetch platform data */ - priv->rx_ring_size = BCMENET_DEF_RX_DESC; - priv->tx_ring_size = BCMENET_DEF_TX_DESC; - - pd = pdev->dev.platform_data; - if (pd) { - memcpy(dev->dev_addr, pd->mac_addr, ETH_ALEN); - priv->has_phy = pd->has_phy; - priv->phy_id = pd->phy_id; - priv->has_phy_interrupt = pd->has_phy_interrupt; - priv->phy_interrupt = pd->phy_interrupt; - priv->use_external_mii = !pd->use_internal_phy; - priv->pause_auto = pd->pause_auto; - priv->pause_rx = pd->pause_rx; - priv->pause_tx = pd->pause_tx; - priv->force_duplex_full = pd->force_duplex_full; - priv->force_speed_100 = pd->force_speed_100; - } - - if (priv->mac_id == 0 && priv->has_phy && !priv->use_external_mii) { - /* using internal PHY, enable clock */ - priv->phy_clk = clk_get(&pdev->dev, "ephy"); - if (IS_ERR(priv->phy_clk)) { - ret = PTR_ERR(priv->phy_clk); - priv->phy_clk = NULL; - goto err; - } - clk_enable(priv->phy_clk); - } - - /* do minimal hardware init to be able to probe mii bus */ - bcm_enet_hw_preinit(priv); - - /* MII bus registration */ - if (priv->has_phy) { - bus = &priv->mii_bus; - bus->name = "bcm63xx_enet MII bus"; -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,28) - bus->dev = &pdev->dev; -#else - bus->parent = &pdev->dev; -#endif - bus->priv = priv; - bus->read = bcm_enet_mdio_read_phylib; - bus->write = bcm_enet_mdio_write_phylib; - sprintf(bus->id, "%d", priv->mac_id); - - /* only probe bus where we think the PHY is, because - * the mdio read operation return 0 instead of 0xffff - * if a slave is not present on hw */ - bus->phy_mask = ~(1 << priv->phy_id); - - bus->irq = kmalloc(sizeof(int) * PHY_MAX_ADDR, GFP_KERNEL); - if (!bus->irq) { - ret = -ENOMEM; - goto err; - } - - if (priv->has_phy_interrupt) - bus->irq[priv->phy_id] = priv->phy_interrupt; - else - bus->irq[priv->phy_id] = PHY_POLL; - - ret = mdiobus_register(bus); - if (ret) { - dev_err(&pdev->dev, "unable to register mdio bus\n"); - goto err; - } - mdio_registered = 1; - } else { - - /* run platform code to initialize PHY device */ - if (pd->mii_config && - pd->mii_config(dev, 1, bcm_enet_mdio_read_mii, - bcm_enet_mdio_write_mii)) { - dev_err(&pdev->dev, "unable to configure mdio bus\n"); - goto err; - } - } - - spin_lock_init(&priv->rx_lock); - - /* init rx timeout (used for oom) */ - init_timer(&priv->rx_timeout); - priv->rx_timeout.function = bcm_enet_refill_rx_timer; - priv->rx_timeout.data = (unsigned long)dev; - - /* init the mib update lock&work */ - mutex_init(&priv->mib_update_lock); - INIT_WORK(&priv->mib_update_task, bcm_enet_update_mib_counters_defer); - - /* zero mib counters */ - for (i = 0; i < ENET_MIB_REG_COUNT; i++) - enet_writel(priv, 0, ENET_MIB_REG(i)); - - /* register netdevice */ - dev->open = bcm_enet_open; - dev->stop = bcm_enet_stop; - dev->hard_start_xmit = bcm_enet_start_xmit; - dev->get_stats = bcm_enet_get_stats; - dev->set_mac_address = bcm_enet_set_mac_address; - dev->set_multicast_list = bcm_enet_set_multicast_list; - netif_napi_add(dev, &priv->napi, bcm_enet_poll, 16); - dev->do_ioctl = bcm_enet_ioctl; -#ifdef CONFIG_NET_POLL_CONTROLLER - dev->poll_controller = bcm_enet_netpoll; -#endif - dev->change_mtu = bcm_enet_change_mtu; - - SET_ETHTOOL_OPS(dev, &bcm_enet_ethtool_ops); - SET_NETDEV_DEV(dev, &pdev->dev); - - ret = register_netdev(dev); - if (ret) - goto err; - - platform_set_drvdata(pdev, dev); - priv->pdev = pdev; - priv->net_dev = dev; - - return 0; - -err: - if (mem_requested) - release_mem_region(res_mem->start, iomem_size); - if (mdio_registered) - mdiobus_unregister(&priv->mii_bus); - kfree(priv->mii_bus.irq); - if (priv->mac_clk) { - clk_disable(priv->mac_clk); - clk_put(priv->mac_clk); - } - if (priv->phy_clk) { - clk_disable(priv->phy_clk); - clk_put(priv->phy_clk); - } - if (priv->base) { - /* turn off mdc clock */ - enet_writel(priv, 0, ENET_MIISC_REG); - iounmap(priv->base); - } -out: - free_netdev(dev); - return ret; -} - - -/* - * exit func, stops hardware and unregisters netdevice - */ -static int __devexit bcm_enet_remove(struct platform_device *pdev) -{ - struct bcm_enet_priv *priv; - struct net_device *dev; - struct resource *res; - - /* stop netdevice */ - dev = platform_get_drvdata(pdev); - priv = netdev_priv(dev); - unregister_netdev(dev); - - /* turn off mdc clock */ - enet_writel(priv, 0, ENET_MIISC_REG); - - if (priv->has_phy) { - mdiobus_unregister(&priv->mii_bus); - kfree(priv->mii_bus.irq); - } else { - struct bcm63xx_enet_platform_data *pd; - - pd = pdev->dev.platform_data; - if (pd && pd->mii_config) - pd->mii_config(dev, 0, bcm_enet_mdio_read_mii, - bcm_enet_mdio_write_mii); - } - - /* release device resources */ - iounmap(priv->base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); - - /* disable hw block clocks */ - if (priv->phy_clk) { - clk_disable(priv->phy_clk); - clk_put(priv->phy_clk); - } - clk_disable(priv->mac_clk); - clk_put(priv->mac_clk); - - platform_set_drvdata(pdev, NULL); - free_netdev(dev); - return 0; -} - -struct platform_driver bcm63xx_enet_driver = { - .probe = bcm_enet_probe, - .remove = __devexit_p(bcm_enet_remove), - .driver = { - .name = "bcm63xx_enet", - .owner = THIS_MODULE, - }, -}; - -/* - * reserve & remap memory space shared between all macs - */ -static int __devinit bcm_enet_shared_probe(struct platform_device *pdev) -{ - struct resource *res; - unsigned int iomem_size; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; - - iomem_size = res->end - res->start + 1; - if (!request_mem_region(res->start, iomem_size, "bcm63xx_enet_dma")) - return -EBUSY; - - bcm_enet_shared_base = ioremap(res->start, iomem_size); - if (!bcm_enet_shared_base) { - release_mem_region(res->start, iomem_size); - return -ENOMEM; - } - return 0; -} - -static int __devexit bcm_enet_shared_remove(struct platform_device *pdev) -{ - struct resource *res; - - iounmap(bcm_enet_shared_base); - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(res->start, res->end - res->start + 1); - return 0; -} - -/* - * this "shared" driver is needed because both macs share a single - * address space - */ -struct platform_driver bcm63xx_enet_shared_driver = { - .probe = bcm_enet_shared_probe, - .remove = __devexit_p(bcm_enet_shared_remove), - .driver = { - .name = "bcm63xx_enet_shared", - .owner = THIS_MODULE, - }, -}; - -/* - * entry point - */ -static int __init bcm_enet_init(void) -{ - int ret; - - ret = platform_driver_register(&bcm63xx_enet_shared_driver); - if (ret) - return ret; - - ret = platform_driver_register(&bcm63xx_enet_driver); - if (ret) - platform_driver_unregister(&bcm63xx_enet_shared_driver); - - return ret; -} - -static void __exit bcm_enet_exit(void) -{ - platform_driver_unregister(&bcm63xx_enet_driver); - platform_driver_unregister(&bcm63xx_enet_shared_driver); -} - - -module_init(bcm_enet_init); -module_exit(bcm_enet_exit); - -MODULE_DESCRIPTION("BCM63xx internal ethernet mac driver"); -MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.h b/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.h deleted file mode 100644 index dc78f5ae27..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/net/bcm63xx_enet.h +++ /dev/null @@ -1,303 +0,0 @@ -#ifndef BCM63XX_ENET_H_ -#define BCM63XX_ENET_H_ - -#include <linux/types.h> -#include <linux/mii.h> -#include <linux/mutex.h> -#include <linux/phy.h> -#include <linux/platform_device.h> - -#include <bcm63xx_regs.h> -#include <bcm63xx_irq.h> -#include <bcm63xx_io.h> - -/* default number of descriptor */ -#define BCMENET_DEF_RX_DESC 64 -#define BCMENET_DEF_TX_DESC 32 - -/* maximum burst len for dma (4 bytes unit) */ -#define BCMENET_DMA_MAXBURST 16 - -/* tx transmit threshold (4 bytes unit), fifo is 256 bytes, the value - * must be low enough so that a DMA transfer of above burst length can - * not overflow the fifo */ -#define BCMENET_TX_FIFO_TRESH 32 - -/* - * hardware maximum rx/tx packet size including FCS, max mtu is - * actually 2047, but if we set max rx size register to 2047 we won't - * get overflow information if packet size is 2048 or above - */ -#define BCMENET_MAX_MTU 2046 - -/* - * rx/tx dma descriptor - */ -struct bcm_enet_desc { - u32 len_stat; - u32 address; -}; - -#define DMADESC_LENGTH_SHIFT 16 -#define DMADESC_LENGTH_MASK (0xfff << DMADESC_LENGTH_SHIFT) -#define DMADESC_OWNER_MASK (1 << 15) -#define DMADESC_EOP_MASK (1 << 14) -#define DMADESC_SOP_MASK (1 << 13) -#define DMADESC_ESOP_MASK (DMADESC_EOP_MASK | DMADESC_SOP_MASK) -#define DMADESC_WRAP_MASK (1 << 12) - -#define DMADESC_UNDER_MASK (1 << 9) -#define DMADESC_APPEND_CRC (1 << 8) -#define DMADESC_OVSIZE_MASK (1 << 4) -#define DMADESC_RXER_MASK (1 << 2) -#define DMADESC_CRC_MASK (1 << 1) -#define DMADESC_OV_MASK (1 << 0) -#define DMADESC_ERR_MASK (DMADESC_UNDER_MASK | \ - DMADESC_OVSIZE_MASK | \ - DMADESC_RXER_MASK | \ - DMADESC_CRC_MASK | \ - DMADESC_OV_MASK) - - -/* - * MIB Counters register definitions -*/ -#define ETH_MIB_TX_GD_OCTETS 0 -#define ETH_MIB_TX_GD_PKTS 1 -#define ETH_MIB_TX_ALL_OCTETS 2 -#define ETH_MIB_TX_ALL_PKTS 3 -#define ETH_MIB_TX_BRDCAST 4 -#define ETH_MIB_TX_MULT 5 -#define ETH_MIB_TX_64 6 -#define ETH_MIB_TX_65_127 7 -#define ETH_MIB_TX_128_255 8 -#define ETH_MIB_TX_256_511 9 -#define ETH_MIB_TX_512_1023 10 -#define ETH_MIB_TX_1024_MAX 11 -#define ETH_MIB_TX_JAB 12 -#define ETH_MIB_TX_OVR 13 -#define ETH_MIB_TX_FRAG 14 -#define ETH_MIB_TX_UNDERRUN 15 -#define ETH_MIB_TX_COL 16 -#define ETH_MIB_TX_1_COL 17 -#define ETH_MIB_TX_M_COL 18 -#define ETH_MIB_TX_EX_COL 19 -#define ETH_MIB_TX_LATE 20 -#define ETH_MIB_TX_DEF 21 -#define ETH_MIB_TX_CRS 22 -#define ETH_MIB_TX_PAUSE 23 - -#define ETH_MIB_RX_GD_OCTETS 32 -#define ETH_MIB_RX_GD_PKTS 33 -#define ETH_MIB_RX_ALL_OCTETS 34 -#define ETH_MIB_RX_ALL_PKTS 35 -#define ETH_MIB_RX_BRDCAST 36 -#define ETH_MIB_RX_MULT 37 -#define ETH_MIB_RX_64 38 -#define ETH_MIB_RX_65_127 39 -#define ETH_MIB_RX_128_255 40 -#define ETH_MIB_RX_256_511 41 -#define ETH_MIB_RX_512_1023 42 -#define ETH_MIB_RX_1024_MAX 43 -#define ETH_MIB_RX_JAB 44 -#define ETH_MIB_RX_OVR 45 -#define ETH_MIB_RX_FRAG 46 -#define ETH_MIB_RX_DROP 47 -#define ETH_MIB_RX_CRC_ALIGN 48 -#define ETH_MIB_RX_UND 49 -#define ETH_MIB_RX_CRC 50 -#define ETH_MIB_RX_ALIGN 51 -#define ETH_MIB_RX_SYM 52 -#define ETH_MIB_RX_PAUSE 53 -#define ETH_MIB_RX_CNTRL 54 - - -struct bcm_enet_mib_counters { - u64 tx_gd_octets; - u32 tx_gd_pkts; - u32 tx_all_octets; - u32 tx_all_pkts; - u32 tx_brdcast; - u32 tx_mult; - u32 tx_64; - u32 tx_65_127; - u32 tx_128_255; - u32 tx_256_511; - u32 tx_512_1023; - u32 tx_1024_max; - u32 tx_jab; - u32 tx_ovr; - u32 tx_frag; - u32 tx_underrun; - u32 tx_col; - u32 tx_1_col; - u32 tx_m_col; - u32 tx_ex_col; - u32 tx_late; - u32 tx_def; - u32 tx_crs; - u32 tx_pause; - u64 rx_gd_octets; - u32 rx_gd_pkts; - u32 rx_all_octets; - u32 rx_all_pkts; - u32 rx_brdcast; - u32 rx_mult; - u32 rx_64; - u32 rx_65_127; - u32 rx_128_255; - u32 rx_256_511; - u32 rx_512_1023; - u32 rx_1024_max; - u32 rx_jab; - u32 rx_ovr; - u32 rx_frag; - u32 rx_drop; - u32 rx_crc_align; - u32 rx_und; - u32 rx_crc; - u32 rx_align; - u32 rx_sym; - u32 rx_pause; - u32 rx_cntrl; -}; - - -struct bcm_enet_priv { - - /* mac id (from platform device id) */ - int mac_id; - - /* base remapped address of device */ - void __iomem *base; - - /* mac irq, rx_dma irq, tx_dma irq */ - int irq; - int irq_rx; - int irq_tx; - - /* hw view of rx & tx dma ring */ - dma_addr_t rx_desc_dma; - dma_addr_t tx_desc_dma; - - /* allocated size (in bytes) for rx & tx dma ring */ - unsigned int rx_desc_alloc_size; - unsigned int tx_desc_alloc_size; - - - struct napi_struct napi; - - /* dma channel id for rx */ - int rx_chan; - - /* number of dma desc in rx ring */ - int rx_ring_size; - - /* cpu view of rx dma ring */ - struct bcm_enet_desc *rx_desc_cpu; - - /* current number of armed descriptor given to hardware for rx */ - int rx_desc_count; - - /* next rx descriptor to fetch from hardware */ - int rx_curr_desc; - - /* next dirty rx descriptor to refill */ - int rx_dirty_desc; - - /* size of allocated rx skbs */ - unsigned int rx_skb_size; - - /* list of skb given to hw for rx */ - struct sk_buff **rx_skb; - - /* used when rx skb allocation failed, so we defer rx queue - * refill */ - struct timer_list rx_timeout; - - /* lock rx_timeout against rx normal operation */ - spinlock_t rx_lock; - - - /* dma channel id for tx */ - int tx_chan; - - /* number of dma desc in tx ring */ - int tx_ring_size; - - /* cpu view of rx dma ring */ - struct bcm_enet_desc *tx_desc_cpu; - - /* number of available descriptor for tx */ - int tx_desc_count; - - /* next tx descriptor avaiable */ - int tx_curr_desc; - - /* next dirty tx descriptor to reclaim */ - int tx_dirty_desc; - - /* list of skb given to hw for tx */ - struct sk_buff **tx_skb; - - /* lock used by tx reclaim and xmit */ - spinlock_t tx_lock; - - - /* set if internal phy is ignored and external mii interface - * is selected */ - int use_external_mii; - - /* set if a phy is connected, phy address must be known, - * probing is not possible */ - int has_phy; - int phy_id; - - /* set if connected phy has an associated irq */ - int has_phy_interrupt; - int phy_interrupt; - - /* used when a phy is connected (phylib used) */ - struct mii_bus mii_bus; - struct phy_device *phydev; - int old_link; - int old_duplex; - int old_pause; - - /* used when no phy is connected */ - int force_speed_100; - int force_duplex_full; - - /* pause parameters */ - int pause_auto; - int pause_rx; - int pause_tx; - - /* stats */ - struct net_device_stats stats; - struct bcm_enet_mib_counters mib; - - /* after mib interrupt, mib registers update is done in this - * work queue */ - struct work_struct mib_update_task; - - /* lock mib update between userspace request and workqueue */ - struct mutex mib_update_lock; - - /* mac clock */ - struct clk *mac_clk; - - /* phy clock if internal phy is used */ - struct clk *phy_clk; - - /* network device reference */ - struct net_device *net_dev; - - /* platform device reference */ - struct platform_device *pdev; - - /* maximum hardware transmit/receive size */ - unsigned int hw_mtu; -}; - -#endif /* ! BCM63XX_ENET_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/net/phy/bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/drivers/net/phy/bcm63xx.c deleted file mode 100644 index 4fed95e835..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/net/phy/bcm63xx.c +++ /dev/null @@ -1,132 +0,0 @@ -/* - * Driver for Broadcom 63xx SOCs integrated PHYs - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ -#include <linux/module.h> -#include <linux/phy.h> - -#define MII_BCM63XX_IR 0x1a /* interrupt register */ -#define MII_BCM63XX_IR_EN 0x4000 /* global interrupt enable */ -#define MII_BCM63XX_IR_DUPLEX 0x0800 /* duplex changed */ -#define MII_BCM63XX_IR_SPEED 0x0400 /* speed changed */ -#define MII_BCM63XX_IR_LINK 0x0200 /* link changed */ -#define MII_BCM63XX_IR_GMASK 0x0100 /* global interrupt mask */ - -MODULE_DESCRIPTION("Broadcom 63xx internal PHY driver"); -MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); -MODULE_LICENSE("GPL"); - -static int bcm63xx_config_init(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - /* Mask interrupts globally. */ - reg |= MII_BCM63XX_IR_GMASK; - err = phy_write(phydev, MII_BCM63XX_IR, reg); - if (err < 0) - return err; - - /* Unmask events we are interested in */ - reg = ~(MII_BCM63XX_IR_DUPLEX | - MII_BCM63XX_IR_SPEED | - MII_BCM63XX_IR_LINK) | - MII_BCM63XX_IR_EN; - err = phy_write(phydev, MII_BCM63XX_IR, reg); - if (err < 0) - return err; - return 0; -} - -static int bcm63xx_ack_interrupt(struct phy_device *phydev) -{ - int reg; - - /* Clear pending interrupts. */ - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - return 0; -} - -static int bcm63xx_config_intr(struct phy_device *phydev) -{ - int reg, err; - - reg = phy_read(phydev, MII_BCM63XX_IR); - if (reg < 0) - return reg; - - if (phydev->interrupts == PHY_INTERRUPT_ENABLED) - reg &= ~MII_BCM63XX_IR_GMASK; - else - reg |= MII_BCM63XX_IR_GMASK; - - err = phy_write(phydev, MII_BCM63XX_IR, reg); - return err; -} - -static struct phy_driver bcm63xx_1_driver = { - .phy_id = 0x00406000, - .phy_id_mask = 0xfffffc00, - .name = "Broadcom BCM63XX (1)", - /* ASYM_PAUSE bit is marked RO in datasheet, so don't cheat */ - .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), - .flags = PHY_HAS_INTERRUPT, - .config_init = bcm63xx_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, - .driver = { .owner = THIS_MODULE }, -}; - -/* same phy as above, with just a different OUI */ -static struct phy_driver bcm63xx_2_driver = { - .phy_id = 0x002bdc00, - .phy_id_mask = 0xfffffc00, - .name = "Broadcom BCM63XX (2)", - .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause), - .flags = PHY_HAS_INTERRUPT, - .config_init = bcm63xx_config_init, - .config_aneg = genphy_config_aneg, - .read_status = genphy_read_status, - .ack_interrupt = bcm63xx_ack_interrupt, - .config_intr = bcm63xx_config_intr, - .driver = { .owner = THIS_MODULE }, -}; - -static int __init bcm63xx_phy_init(void) -{ - int ret; - - ret = phy_driver_register(&bcm63xx_1_driver); - if (ret) - goto out_63xx_1; - ret = phy_driver_register(&bcm63xx_2_driver); - if (ret) - goto out_63xx_2; - return ret; - -out_63xx_2: - phy_driver_unregister(&bcm63xx_1_driver); -out_63xx_1: - return ret; -} - -static void __exit bcm63xx_phy_exit(void) -{ - phy_driver_unregister(&bcm63xx_1_driver); - phy_driver_unregister(&bcm63xx_2_driver); -} - -module_init(bcm63xx_phy_init); -module_exit(bcm63xx_phy_exit); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.c b/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.c deleted file mode 100644 index 383e322d06..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.c +++ /dev/null @@ -1,536 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/ioport.h> -#include <linux/timer.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/gpio.h> - -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> -#include "bcm63xx_pcmcia.h" - -#define PFX "bcm63xx_pcmcia: " - -#ifdef CONFIG_CARDBUS -/* if cardbus is used, platform device needs reference to actual pci - * device */ -static struct pci_dev *bcm63xx_cb_dev; -#endif - -/* - * read/write helper for pcmcia regs - */ -static inline u32 pcmcia_readl(struct bcm63xx_pcmcia_socket *skt, u32 off) -{ - return bcm_readl(skt->base + off); -} - -static inline void pcmcia_writel(struct bcm63xx_pcmcia_socket *skt, - u32 val, u32 off) -{ - bcm_writel(val, skt->base + off); -} - -/* - * (Re-)Initialise the socket, turning on status interrupts and PCMCIA - * bus. This must wait for power to stabilise so that the card status - * signals report correctly. - */ -static int bcm63xx_pcmcia_sock_init(struct pcmcia_socket *sock) -{ - struct bcm63xx_pcmcia_socket *skt; - skt = sock->driver_data; - return 0; -} - -/* - * Remove power on the socket, disable IRQs from the card. - * Turn off status interrupts, and disable the PCMCIA bus. - */ -static int bcm63xx_pcmcia_suspend(struct pcmcia_socket *sock) -{ - struct bcm63xx_pcmcia_socket *skt; - skt = sock->driver_data; - return 0; -} - -/* - * Implements the set_socket() operation for the in-kernel PCMCIA - * service (formerly SS_SetSocket in Card Services). We more or - * less punt all of this work and let the kernel handle the details - * of power configuration, reset, &c. We also record the value of - * `state' in order to regurgitate it to the PCMCIA core later. - */ -static int bcm63xx_pcmcia_set_socket(struct pcmcia_socket *sock, - socket_state_t *state) -{ - struct bcm63xx_pcmcia_socket *skt; - unsigned long flags; - u32 val; - - skt = sock->driver_data; - - spin_lock_irqsave(&skt->lock, flags); - - /* apply requested socket power */ - /* FIXME: hardware can't do this */ - - /* apply socket reset */ - val = pcmcia_readl(skt, PCMCIA_C1_REG); - if (state->flags & SS_RESET) - val |= PCMCIA_C1_RESET_MASK; - else - val &= ~PCMCIA_C1_RESET_MASK; - - /* reverse reset logic for cardbus card */ - if (skt->card_detected && (skt->card_type & CARD_CARDBUS)) - val ^= PCMCIA_C1_RESET_MASK; - - pcmcia_writel(skt, val, PCMCIA_C1_REG); - - /* keep requested state for event reporting */ - skt->requested_state = *state; - - spin_unlock_irqrestore(&skt->lock, flags); - - return 0; -} - -/* - * identity cardtype from VS[12] input, CD[12] input while only VS2 is - * floating, and CD[12] input while only VS1 is floating - */ -enum { - IN_VS1 = (1 << 0), - IN_VS2 = (1 << 1), - IN_CD1_VS2H = (1 << 2), - IN_CD2_VS2H = (1 << 3), - IN_CD1_VS1H = (1 << 4), - IN_CD2_VS1H = (1 << 5), -}; - -static const u8 vscd_to_cardtype[] = { - - /* VS1 float, VS2 float */ - [IN_VS1 | IN_VS2] = (CARD_PCCARD | CARD_5V), - - /* VS1 grounded, VS2 float */ - [IN_VS2] = (CARD_PCCARD | CARD_5V | CARD_3V), - - /* VS1 grounded, VS2 grounded */ - [0] = (CARD_PCCARD | CARD_5V | CARD_3V | CARD_XV), - - /* VS1 tied to CD1, VS2 float */ - [IN_VS1 | IN_VS2 | IN_CD1_VS1H] = (CARD_CARDBUS | CARD_3V), - - /* VS1 grounded, VS2 tied to CD2 */ - [IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V | CARD_XV), - - /* VS1 tied to CD2, VS2 grounded */ - [IN_VS1 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_3V | CARD_XV | CARD_YV), - - /* VS1 float, VS2 grounded */ - [IN_VS1] = (CARD_PCCARD | CARD_XV), - - /* VS1 float, VS2 tied to CD2 */ - [IN_VS1 | IN_VS2 | IN_CD2_VS2H] = (CARD_CARDBUS | CARD_3V), - - /* VS1 float, VS2 tied to CD1 */ - [IN_VS1 | IN_VS2 | IN_CD1_VS2H] = (CARD_CARDBUS | CARD_XV | CARD_YV), - - /* VS1 tied to CD2, VS2 float */ - [IN_VS1 | IN_VS2 | IN_CD2_VS1H] = (CARD_CARDBUS | CARD_YV), - - /* VS2 grounded, VS1 is tied to CD1, CD2 is grounded */ - [IN_VS1 | IN_CD1_VS1H] = 0, /* ignore cardbay */ -}; - -/* - * poll hardware to check card insertion status - */ -static unsigned int __get_socket_status(struct bcm63xx_pcmcia_socket *skt) -{ - unsigned int stat; - u32 val; - - stat = 0; - - /* check CD for card presence */ - val = pcmcia_readl(skt, PCMCIA_C1_REG); - - if (!(val & PCMCIA_C1_CD1_MASK) && !(val & PCMCIA_C1_CD2_MASK)) - stat |= SS_DETECT; - - /* if new insertion, detect cardtype */ - if ((stat & SS_DETECT) && !skt->card_detected) { - unsigned int stat = 0; - - /* float VS1, float VS2 */ - val |= PCMCIA_C1_VS1OE_MASK; - val |= PCMCIA_C1_VS2OE_MASK; - pcmcia_writel(skt, val, PCMCIA_C1_REG); - - /* wait for output to stabilize and read VS[12] */ - udelay(10); - val = pcmcia_readl(skt, PCMCIA_C1_REG); - stat |= (val & PCMCIA_C1_VS1_MASK) ? IN_VS1 : 0; - stat |= (val & PCMCIA_C1_VS2_MASK) ? IN_VS2 : 0; - - /* drive VS1 low, float VS2 */ - val &= ~PCMCIA_C1_VS1OE_MASK; - val |= PCMCIA_C1_VS2OE_MASK; - pcmcia_writel(skt, val, PCMCIA_C1_REG); - - /* wait for output to stabilize and read CD[12] */ - udelay(10); - val = pcmcia_readl(skt, PCMCIA_C1_REG); - stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS2H : 0; - stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS2H : 0; - - /* float VS1, drive VS2 low */ - val |= PCMCIA_C1_VS1OE_MASK; - val &= ~PCMCIA_C1_VS2OE_MASK; - pcmcia_writel(skt, val, PCMCIA_C1_REG); - - /* wait for output to stabilize and read CD[12] */ - udelay(10); - val = pcmcia_readl(skt, PCMCIA_C1_REG); - stat |= (val & PCMCIA_C1_CD1_MASK) ? IN_CD1_VS1H : 0; - stat |= (val & PCMCIA_C1_CD2_MASK) ? IN_CD2_VS1H : 0; - - /* guess cardtype from all this */ - skt->card_type = vscd_to_cardtype[stat]; - if (!skt->card_type) - printk(KERN_ERR PFX "unsupported card type\n"); - - /* drive both VS pin to 0 again */ - val &= ~(PCMCIA_C1_VS1OE_MASK | PCMCIA_C1_VS2OE_MASK); - - /* enable correct logic */ - val &= ~(PCMCIA_C1_EN_PCMCIA_MASK | PCMCIA_C1_EN_CARDBUS_MASK); - if (skt->card_type & CARD_PCCARD) - val |= PCMCIA_C1_EN_PCMCIA_MASK; - else - val |= PCMCIA_C1_EN_CARDBUS_MASK; - - pcmcia_writel(skt, val, PCMCIA_C1_REG); - } - skt->card_detected = (stat & SS_DETECT) ? 1 : 0; - - /* report card type/voltage */ - if (skt->card_type & CARD_CARDBUS) - stat |= SS_CARDBUS; - if (skt->card_type & CARD_3V) - stat |= SS_3VCARD; - if (skt->card_type & CARD_XV) - stat |= SS_XVCARD; - stat |= SS_POWERON; - - if (gpio_get_value(skt->pd->ready_gpio)) - stat |= SS_READY; - - return stat; -} - -/* - * core request to get current socket status - */ -static int bcm63xx_pcmcia_get_status(struct pcmcia_socket *sock, - unsigned int *status) -{ - struct bcm63xx_pcmcia_socket *skt; - - skt = sock->driver_data; - - spin_lock_bh(&skt->lock); - *status = __get_socket_status(skt); - spin_unlock_bh(&skt->lock); - - return 0; -} - -/* - * socket polling timer callback - */ -static void bcm63xx_pcmcia_poll(unsigned long data) -{ - struct bcm63xx_pcmcia_socket *skt; - unsigned int stat, events; - - skt = (struct bcm63xx_pcmcia_socket *)data; - - spin_lock_bh(&skt->lock); - - stat = __get_socket_status(skt); - - /* keep only changed bits, and mask with required one from the - * core */ - events = (stat ^ skt->old_status) & skt->requested_state.csc_mask; - skt->old_status = stat; - spin_unlock_bh(&skt->lock); - - if (events) - pcmcia_parse_events(&skt->socket, events); - - mod_timer(&skt->timer, - jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); -} - -static int bcm63xx_pcmcia_set_io_map(struct pcmcia_socket *sock, - struct pccard_io_map *map) -{ - /* this doesn't seem to be called by pcmcia layer if static - * mapping is used */ - return 0; -} - -static int bcm63xx_pcmcia_set_mem_map(struct pcmcia_socket *sock, - struct pccard_mem_map *map) -{ - struct bcm63xx_pcmcia_socket *skt; - struct resource *res; - - skt = sock->driver_data; - if (map->flags & MAP_ATTRIB) - res = skt->attr_res; - else - res = skt->common_res; - - map->static_start = res->start + map->card_start; - return 0; -} - -static struct pccard_operations bcm63xx_pcmcia_operations = { - .init = bcm63xx_pcmcia_sock_init, - .suspend = bcm63xx_pcmcia_suspend, - .get_status = bcm63xx_pcmcia_get_status, - .set_socket = bcm63xx_pcmcia_set_socket, - .set_io_map = bcm63xx_pcmcia_set_io_map, - .set_mem_map = bcm63xx_pcmcia_set_mem_map, -}; - -/* - * register pcmcia socket to core - */ -static int bcm63xx_drv_pcmcia_probe(struct platform_device *pdev) -{ - struct bcm63xx_pcmcia_socket *skt; - struct pcmcia_socket *sock; - struct resource *res, *irq_res; - unsigned int regmem_size = 0, iomem_size = 0; - u32 val; - int ret; - - skt = kzalloc(sizeof(*skt), GFP_KERNEL); - if (!skt) - return -ENOMEM; - spin_lock_init(&skt->lock); - sock = &skt->socket; - sock->driver_data = skt; - - /* make sure we have all resources we need */ - skt->common_res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - skt->attr_res = platform_get_resource(pdev, IORESOURCE_MEM, 2); - irq_res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - skt->pd = pdev->dev.platform_data; - if (!skt->common_res || !skt->attr_res || !irq_res || !skt->pd) { - ret = -EINVAL; - goto err; - } - - /* remap pcmcia registers */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - regmem_size = res->end - res->start + 1; - if (!request_mem_region(res->start, regmem_size, "bcm63xx_pcmcia")) { - ret = -EINVAL; - goto err; - } - skt->reg_res = res; - - skt->base = ioremap(res->start, regmem_size); - if (!skt->base) { - ret = -ENOMEM; - goto err; - } - - /* remap io registers */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 3); - iomem_size = res->end - res->start + 1; - skt->io_base = ioremap(res->start, iomem_size); - if (!skt->io_base) { - ret = -ENOMEM; - goto err; - } - - /* resources are static */ - sock->resource_ops = &pccard_static_ops; - sock->ops = &bcm63xx_pcmcia_operations; - sock->owner = THIS_MODULE; - sock->dev.parent = &pdev->dev; - sock->features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; - sock->io_offset = (unsigned long)skt->io_base; - sock->pci_irq = irq_res->start; - -#ifdef CONFIG_CARDBUS - sock->cb_dev = bcm63xx_cb_dev; - if (bcm63xx_cb_dev) - sock->features |= SS_CAP_CARDBUS; -#endif - - /* assume common & attribute memory have the same size */ - sock->map_size = skt->common_res->end - skt->common_res->start + 1; - - /* initialize polling timer */ - setup_timer(&skt->timer, bcm63xx_pcmcia_poll, (unsigned long)skt); - - /* initialize pcmcia control register, drive VS[12] to 0, - * leave CB IDSEL to the old value since it is set by the PCI - * layer */ - val = pcmcia_readl(skt, PCMCIA_C1_REG); - val &= PCMCIA_C1_CBIDSEL_MASK; - val |= PCMCIA_C1_EN_PCMCIA_GPIO_MASK; - pcmcia_writel(skt, val, PCMCIA_C1_REG); - - /* FIXME set correct pcmcia timings */ - val = PCMCIA_C2_DATA16_MASK; - val |= 10 << PCMCIA_C2_RWCOUNT_SHIFT; - val |= 6 << PCMCIA_C2_INACTIVE_SHIFT; - val |= 3 << PCMCIA_C2_SETUP_SHIFT; - val |= 3 << PCMCIA_C2_HOLD_SHIFT; - pcmcia_writel(skt, val, PCMCIA_C2_REG); - - /* request and setup ready gpio */ - ret = gpio_request(skt->pd->ready_gpio, "bcm63xx_pcmcia"); - if (ret < 0) - goto err; - - ret = gpio_direction_input(skt->pd->ready_gpio); - if (ret < 0) - goto err_gpio; - - ret = pcmcia_register_socket(sock); - if (ret) - goto err_gpio; - - /* start polling socket */ - mod_timer(&skt->timer, - jiffies + msecs_to_jiffies(BCM63XX_PCMCIA_POLL_RATE)); - - platform_set_drvdata(pdev, skt); - return 0; - -err_gpio: - gpio_free(skt->pd->ready_gpio); - -err: - if (skt->io_base) - iounmap(skt->io_base); - if (skt->base) - iounmap(skt->base); - if (skt->reg_res) - release_mem_region(skt->reg_res->start, regmem_size); - kfree(skt); - return ret; -} - -static int bcm63xx_drv_pcmcia_remove(struct platform_device *pdev) -{ - struct bcm63xx_pcmcia_socket *skt; - struct resource *res; - - skt = platform_get_drvdata(pdev); - del_timer_sync(&skt->timer); - iounmap(skt->base); - iounmap(skt->io_base); - res = skt->reg_res; - release_mem_region(res->start, res->end - res->start + 1); - gpio_free(skt->pd->ready_gpio); - platform_set_drvdata(pdev, NULL); - kfree(skt); - return 0; -} - -struct platform_driver bcm63xx_pcmcia_driver = { - .probe = bcm63xx_drv_pcmcia_probe, - .remove = __devexit_p(bcm63xx_drv_pcmcia_remove), - .driver = { - .name = "bcm63xx_pcmcia", - .owner = THIS_MODULE, - }, -}; - -#ifdef CONFIG_CARDBUS -static int __devinit bcm63xx_cb_probe(struct pci_dev *dev, - const struct pci_device_id *id) -{ - /* keep pci device */ - bcm63xx_cb_dev = dev; - return platform_driver_register(&bcm63xx_pcmcia_driver); -} - -static void __devexit bcm63xx_cb_exit(struct pci_dev *dev) -{ - platform_driver_unregister(&bcm63xx_pcmcia_driver); - bcm63xx_cb_dev = NULL; -} - -static struct pci_device_id bcm63xx_cb_table[] = { - { - .vendor = PCI_VENDOR_ID_BROADCOM, - .device = PCI_ANY_ID, - .subvendor = PCI_VENDOR_ID_BROADCOM, - .subdevice = PCI_ANY_ID, - .class = PCI_CLASS_BRIDGE_CARDBUS << 8, - .class_mask = ~0, - }, - {} -}; - -MODULE_DEVICE_TABLE(pci, bcm63xx_cb_table); - -static struct pci_driver bcm63xx_cardbus_driver = { - .name = "yenta_cardbus", - .id_table = bcm63xx_cb_table, - .probe = bcm63xx_cb_probe, - .remove = __devexit_p(bcm63xx_cb_exit), -}; -#endif - -/* - * if cardbus support is enabled, register our platform device after - * our fake cardbus bridge has been registered - */ -static int __init bcm63xx_pcmcia_init(void) -{ -#ifdef CONFIG_CARDBUS - return pci_register_driver(&bcm63xx_cardbus_driver); -#else - return platform_driver_register(&bcm63xx_pcmcia_driver); -#endif -} - -static void __exit bcm63xx_pcmcia_exit(void) -{ -#ifdef CONFIG_CARDBUS - return pci_unregister_driver(&bcm63xx_cardbus_driver); -#else - platform_driver_unregister(&bcm63xx_pcmcia_driver); -#endif -} - -module_init(bcm63xx_pcmcia_init); -module_exit(bcm63xx_pcmcia_exit); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); -MODULE_DESCRIPTION("Linux PCMCIA Card Services: bcm63xx Socket Controller"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.h b/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.h deleted file mode 100644 index 85de86696a..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/pcmcia/bcm63xx_pcmcia.h +++ /dev/null @@ -1,65 +0,0 @@ -#ifndef BCM63XX_PCMCIA_H_ -#define BCM63XX_PCMCIA_H_ - -#include <linux/types.h> -#include <linux/timer.h> -#include <pcmcia/ss.h> -#include <bcm63xx_dev_pcmcia.h> - -/* socket polling rate in ms */ -#define BCM63XX_PCMCIA_POLL_RATE 500 - -enum { - CARD_CARDBUS = (1 << 0), - - CARD_PCCARD = (1 << 1), - - CARD_5V = (1 << 2), - - CARD_3V = (1 << 3), - - CARD_XV = (1 << 4), - - CARD_YV = (1 << 5), -}; - -struct bcm63xx_pcmcia_socket { - struct pcmcia_socket socket; - - /* platform specific data */ - struct bcm63xx_pcmcia_platform_data *pd; - - /* all regs access are protected by this spinlock */ - spinlock_t lock; - - /* pcmcia registers resource */ - struct resource *reg_res; - - /* base remapped address of registers */ - void __iomem *base; - - /* whether a card is detected at the moment */ - int card_detected; - - /* type of detected card (mask of above enum) */ - u8 card_type; - - /* keep last socket status to implement event reporting */ - unsigned int old_status; - - /* backup of requested socket state */ - socket_state_t requested_state; - - /* timer used for socket status polling */ - struct timer_list timer; - - /* attribute/common memory resources */ - struct resource *attr_res; - struct resource *common_res; - struct resource *io_res; - - /* base address of io memory */ - void __iomem *io_base; -}; - -#endif /* BCM63XX_PCMCIA_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/serial/bcm63xx_uart.c b/target/linux/brcm63xx/files-2.6.30/drivers/serial/bcm63xx_uart.c deleted file mode 100644 index 606f4d68c0..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/serial/bcm63xx_uart.c +++ /dev/null @@ -1,890 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Derived from many drivers using generic_serial interface. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - * - * Serial driver for BCM63xx integrated UART. - * - * Hardware flow control was _not_ tested since I only have RX/TX on - * my board. - */ - -#if defined(CONFIG_SERIAL_BCM63XX_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ) -#define SUPPORT_SYSRQ -#endif - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/console.h> -#include <linux/clk.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/sysrq.h> -#include <linux/serial.h> -#include <linux/serial_core.h> - -#include <bcm63xx_clk.h> -#include <bcm63xx_irq.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -#define BCM63XX_NR_UARTS 1 - -static struct uart_port ports[BCM63XX_NR_UARTS]; - -/* - * rx interrupt mask / stat - * - * mask: - * - rx fifo full - * - rx fifo above threshold - * - rx fifo not empty for too long - */ -#define UART_RX_INT_MASK (UART_IR_MASK(UART_IR_RXOVER) | \ - UART_IR_MASK(UART_IR_RXTHRESH) | \ - UART_IR_MASK(UART_IR_RXTIMEOUT)) - -#define UART_RX_INT_STAT (UART_IR_STAT(UART_IR_RXOVER) | \ - UART_IR_STAT(UART_IR_RXTHRESH) | \ - UART_IR_STAT(UART_IR_RXTIMEOUT)) - -/* - * tx interrupt mask / stat - * - * mask: - * - tx fifo empty - * - tx fifo below threshold - */ -#define UART_TX_INT_MASK (UART_IR_MASK(UART_IR_TXEMPTY) | \ - UART_IR_MASK(UART_IR_TXTRESH)) - -#define UART_TX_INT_STAT (UART_IR_STAT(UART_IR_TXEMPTY) | \ - UART_IR_STAT(UART_IR_TXTRESH)) - -/* - * external input interrupt - * - * mask: any edge on CTS, DCD - */ -#define UART_EXTINP_INT_MASK (UART_EXTINP_IRMASK(UART_EXTINP_IR_CTS) | \ - UART_EXTINP_IRMASK(UART_EXTINP_IR_DCD)) - -/* - * handy uart register accessor - */ -static inline unsigned int bcm_uart_readl(struct uart_port *port, - unsigned int offset) -{ - return bcm_readl(port->membase + offset); -} - -static inline void bcm_uart_writel(struct uart_port *port, - unsigned int value, unsigned int offset) -{ - bcm_writel(value, port->membase + offset); -} - -/* - * serial core request to check if uart tx fifo is empty - */ -static unsigned int bcm_uart_tx_empty(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - return (val & UART_IR_STAT(UART_IR_TXEMPTY)) ? 1 : 0; -} - -/* - * serial core request to set RTS and DTR pin state and loopback mode - */ -static void bcm_uart_set_mctrl(struct uart_port *port, unsigned int mctrl) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_DTR_MASK | UART_MCTL_RTS_MASK); - /* invert of written value is reflected on the pin */ - if (!(mctrl & TIOCM_DTR)) - val |= UART_MCTL_DTR_MASK; - if (!(mctrl & TIOCM_RTS)) - val |= UART_MCTL_RTS_MASK; - bcm_uart_writel(port, val, UART_MCTL_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (mctrl & TIOCM_LOOP) - val |= UART_CTL_LOOPBACK_MASK; - else - val &= ~UART_CTL_LOOPBACK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to return RI, CTS, DCD and DSR pin state - */ -static unsigned int bcm_uart_get_mctrl(struct uart_port *port) -{ - unsigned int val, mctrl; - - mctrl = 0; - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_RI_MASK) - mctrl |= TIOCM_RI; - if (val & UART_EXTINP_CTS_MASK) - mctrl |= TIOCM_CTS; - if (val & UART_EXTINP_DCD_MASK) - mctrl |= TIOCM_CD; - if (val & UART_EXTINP_DSR_MASK) - mctrl |= TIOCM_DSR; - return mctrl; -} - -/* - * serial core request to disable tx ASAP (used for flow control) - */ -static void bcm_uart_stop_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_TXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to (re)enable tx - */ -static void bcm_uart_start_tx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_TXEN_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * serial core request to stop rx, called before port shutdown - */ -static void bcm_uart_stop_rx(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_RX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to enable modem status interrupt reporting - */ -static void bcm_uart_enable_ms(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - val |= UART_IR_MASK(UART_IR_EXTIP); - bcm_uart_writel(port, val, UART_IR_REG); -} - -/* - * serial core request to start/stop emitting break char - */ -static void bcm_uart_break_ctl(struct uart_port *port, int ctl) -{ - unsigned long flags; - unsigned int val; - - spin_lock_irqsave(&port->lock, flags); - - val = bcm_uart_readl(port, UART_CTL_REG); - if (ctl) - val |= UART_CTL_XMITBRK_MASK; - else - val &= ~UART_CTL_XMITBRK_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * return port type in string format - */ -static const char *bcm_uart_type(struct uart_port *port) -{ - return (port->type == PORT_BCM63XX) ? "bcm63xx_uart" : NULL; -} - -/* - * read all chars in rx fifo and send them to core - */ -static void bcm_uart_do_rx(struct uart_port *port) -{ - struct tty_struct *tty; - unsigned int max_count; - - /* limit number of char read in interrupt, should not be - * higher than fifo size anyway since we're much faster than - * serial port */ - max_count = 32; - tty = port->info->port.tty; - do { - unsigned int iestat, c, cstat; - char flag; - - /* get overrun/fifo empty information from ier - * register */ - iestat = bcm_uart_readl(port, UART_IR_REG); - if (!(iestat & UART_IR_STAT(UART_IR_RXNOTEMPTY))) - break; - - cstat = c = bcm_uart_readl(port, UART_FIFO_REG); - port->icount.rx++; - flag = TTY_NORMAL; - c &= 0xff; - - if (unlikely((cstat & UART_FIFO_ANYERR_MASK))) { - /* do stats first */ - if (cstat & UART_FIFO_BRKDET_MASK) { - port->icount.brk++; - if (uart_handle_break(port)) - continue; - } - - if (cstat & UART_FIFO_PARERR_MASK) - port->icount.parity++; - if (cstat & UART_FIFO_FRAMEERR_MASK) - port->icount.frame++; - - /* update flag wrt read_status_mask */ - cstat &= port->read_status_mask; - if (cstat & UART_FIFO_BRKDET_MASK) - flag = TTY_BREAK; - if (cstat & UART_FIFO_FRAMEERR_MASK) - flag = TTY_FRAME; - if (cstat & UART_FIFO_PARERR_MASK) - flag = TTY_PARITY; - } - - if (uart_handle_sysrq_char(port, c)) - continue; - - if (unlikely(iestat & UART_IR_STAT(UART_IR_RXOVER))) { - port->icount.overrun++; - tty_insert_flip_char(tty, 0, TTY_OVERRUN); - } - - if ((cstat & port->ignore_status_mask) == 0) - tty_insert_flip_char(tty, c, flag); - - } while (--max_count); - - tty_flip_buffer_push(tty); -} - -/* - * fill tx fifo with chars to send, stop when fifo is about to be full - * or when all chars have been sent. - */ -static void bcm_uart_do_tx(struct uart_port *port) -{ - struct circ_buf *xmit; - unsigned int val, max_count; - - if (port->x_char) { - bcm_uart_writel(port, port->x_char, UART_FIFO_REG); - port->icount.tx++; - port->x_char = 0; - return; - } - - if (uart_tx_stopped(port)) { - bcm_uart_stop_tx(port); - return; - } - - xmit = &port->info->xmit; - if (uart_circ_empty(xmit)) - goto txq_empty; - - val = bcm_uart_readl(port, UART_MCTL_REG); - val = (val & UART_MCTL_TXFIFOFILL_MASK) >> UART_MCTL_TXFIFOFILL_SHIFT; - max_count = port->fifosize - val; - - while (max_count--) { - unsigned int c; - - c = xmit->buf[xmit->tail]; - bcm_uart_writel(port, c, UART_FIFO_REG); - xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1); - port->icount.tx++; - if (uart_circ_empty(xmit)) - break; - } - - if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) - uart_write_wakeup(port); - - if (uart_circ_empty(xmit)) - goto txq_empty; - return; - -txq_empty: - /* nothing to send, disable transmit interrupt */ - val = bcm_uart_readl(port, UART_IR_REG); - val &= ~UART_TX_INT_MASK; - bcm_uart_writel(port, val, UART_IR_REG); - return; -} - -/* - * process uart interrupt - */ -static irqreturn_t bcm_uart_interrupt(int irq, void *dev_id) -{ - struct uart_port *port; - unsigned int irqstat; - - port = dev_id; - spin_lock(&port->lock); - - irqstat = bcm_uart_readl(port, UART_IR_REG); - if (irqstat & UART_RX_INT_STAT) - bcm_uart_do_rx(port); - - if (irqstat & UART_TX_INT_STAT) - bcm_uart_do_tx(port); - - if (irqstat & UART_IR_MASK(UART_IR_EXTIP)) { - unsigned int estat; - - estat = bcm_uart_readl(port, UART_EXTINP_REG); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_CTS)) - uart_handle_cts_change(port, - estat & UART_EXTINP_CTS_MASK); - if (estat & UART_EXTINP_IRSTAT(UART_EXTINP_IR_DCD)) - uart_handle_dcd_change(port, - estat & UART_EXTINP_DCD_MASK); - } - - spin_unlock(&port->lock); - return IRQ_HANDLED; -} - -/* - * enable rx & tx operation on uart - */ -static void bcm_uart_enable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val |= (UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * disable rx & tx operation on uart - */ -static void bcm_uart_disable(struct uart_port *port) -{ - unsigned int val; - - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~(UART_CTL_BRGEN_MASK | UART_CTL_TXEN_MASK | - UART_CTL_RXEN_MASK); - bcm_uart_writel(port, val, UART_CTL_REG); -} - -/* - * clear all unread data in rx fifo and unsent data in tx fifo - */ -static void bcm_uart_flush(struct uart_port *port) -{ - unsigned int val; - - /* empty rx and tx fifo */ - val = bcm_uart_readl(port, UART_CTL_REG); - val |= UART_CTL_RSTRXFIFO_MASK | UART_CTL_RSTTXFIFO_MASK; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* read any pending char to make sure all irq status are - * cleared */ - (void)bcm_uart_readl(port, UART_FIFO_REG); -} - -/* - * serial core request to initialize uart and start rx operation - */ -static int bcm_uart_startup(struct uart_port *port) -{ - unsigned int val; - int ret; - - /* mask all irq and flush port */ - bcm_uart_disable(port); - bcm_uart_writel(port, 0, UART_IR_REG); - bcm_uart_flush(port); - - /* clear any pending external input interrupt */ - (void)bcm_uart_readl(port, UART_EXTINP_REG); - - /* set rx/tx fifo thresh to fifo half size */ - val = bcm_uart_readl(port, UART_MCTL_REG); - val &= ~(UART_MCTL_RXFIFOTHRESH_MASK | UART_MCTL_TXFIFOTHRESH_MASK); - val |= (port->fifosize / 2) << UART_MCTL_RXFIFOTHRESH_SHIFT; - val |= (port->fifosize / 2) << UART_MCTL_TXFIFOTHRESH_SHIFT; - bcm_uart_writel(port, val, UART_MCTL_REG); - - /* set rx fifo timeout to 1 char time */ - val = bcm_uart_readl(port, UART_CTL_REG); - val &= ~UART_CTL_RXTMOUTCNT_MASK; - val |= 1 << UART_CTL_RXTMOUTCNT_SHIFT; - bcm_uart_writel(port, val, UART_CTL_REG); - - /* report any edge on dcd and cts */ - val = UART_EXTINP_INT_MASK; - val |= UART_EXTINP_DCD_NOSENSE_MASK; - val |= UART_EXTINP_CTS_NOSENSE_MASK; - bcm_uart_writel(port, val, UART_EXTINP_REG); - - /* register irq and enable rx interrupts */ - ret = request_irq(port->irq, bcm_uart_interrupt, 0, - bcm_uart_type(port), port); - if (ret) - return ret; - bcm_uart_writel(port, UART_RX_INT_MASK, UART_IR_REG); - bcm_uart_enable(port); - return 0; -} - -/* - * serial core request to flush & disable uart - */ -static void bcm_uart_shutdown(struct uart_port *port) -{ - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - bcm_uart_writel(port, 0, UART_IR_REG); - spin_unlock_irqrestore(&port->lock, flags); - - bcm_uart_disable(port); - bcm_uart_flush(port); - free_irq(port->irq, port); -} - -/* - * serial core request to change current uart setting - */ -static void bcm_uart_set_termios(struct uart_port *port, - struct ktermios *new, - struct ktermios *old) -{ - unsigned int ctl, baud, quot, ier; - unsigned long flags; - - spin_lock_irqsave(&port->lock, flags); - - /* disable uart while changing speed */ - bcm_uart_disable(port); - bcm_uart_flush(port); - - /* update Control register */ - ctl = bcm_uart_readl(port, UART_CTL_REG); - ctl &= ~UART_CTL_BITSPERSYM_MASK; - - switch (new->c_cflag & CSIZE) { - case CS5: - ctl |= (0 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS6: - ctl |= (1 << UART_CTL_BITSPERSYM_SHIFT); - break; - case CS7: - ctl |= (2 << UART_CTL_BITSPERSYM_SHIFT); - break; - default: - ctl |= (3 << UART_CTL_BITSPERSYM_SHIFT); - break; - } - - ctl &= ~UART_CTL_STOPBITS_MASK; - if (new->c_cflag & CSTOPB) - ctl |= UART_CTL_STOPBITS_2; - else - ctl |= UART_CTL_STOPBITS_1; - - ctl &= ~(UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - if (new->c_cflag & PARENB) - ctl |= (UART_CTL_RXPAREN_MASK | UART_CTL_TXPAREN_MASK); - ctl &= ~(UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - if (new->c_cflag & PARODD) - ctl |= (UART_CTL_RXPAREVEN_MASK | UART_CTL_TXPAREVEN_MASK); - bcm_uart_writel(port, ctl, UART_CTL_REG); - - /* update Baudword register */ - baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16); - quot = uart_get_divisor(port, baud) - 1; - bcm_uart_writel(port, quot, UART_BAUD_REG); - - /* update Interrupt register */ - ier = bcm_uart_readl(port, UART_IR_REG); - - ier &= ~UART_IR_MASK(UART_IR_EXTIP); - if (UART_ENABLE_MS(port, new->c_cflag)) - ier |= UART_IR_MASK(UART_IR_EXTIP); - - bcm_uart_writel(port, ier, UART_IR_REG); - - /* update read/ignore mask */ - port->read_status_mask = UART_FIFO_VALID_MASK; - if (new->c_iflag & INPCK) { - port->read_status_mask |= UART_FIFO_FRAMEERR_MASK; - port->read_status_mask |= UART_FIFO_PARERR_MASK; - } - if (new->c_iflag & (BRKINT)) - port->read_status_mask |= UART_FIFO_BRKDET_MASK; - - port->ignore_status_mask = 0; - if (new->c_iflag & IGNPAR) - port->ignore_status_mask |= UART_FIFO_PARERR_MASK; - if (new->c_iflag & IGNBRK) - port->ignore_status_mask |= UART_FIFO_BRKDET_MASK; - if (!(new->c_cflag & CREAD)) - port->ignore_status_mask |= UART_FIFO_VALID_MASK; - - uart_update_timeout(port, new->c_cflag, baud); - bcm_uart_enable(port); - spin_unlock_irqrestore(&port->lock, flags); -} - -/* - * serial core request to claim uart iomem - */ -static int bcm_uart_request_port(struct uart_port *port) -{ - unsigned int size; - - size = RSET_UART_SIZE; - if (!request_mem_region(port->mapbase, size, "bcm63xx")) { - dev_err(port->dev, "Memory region busy\n"); - return -EBUSY; - } - - port->membase = ioremap(port->mapbase, size); - if (!port->membase) { - dev_err(port->dev, "Unable to map registers\n"); - release_mem_region(port->mapbase, size); - return -EBUSY; - } - return 0; -} - -/* - * serial core request to release uart iomem - */ -static void bcm_uart_release_port(struct uart_port *port) -{ - release_mem_region(port->mapbase, RSET_UART_SIZE); - iounmap(port->membase); -} - -/* - * serial core request to do any port required autoconfiguration - */ -static void bcm_uart_config_port(struct uart_port *port, int flags) -{ - if (flags & UART_CONFIG_TYPE) { - if (bcm_uart_request_port(port)) - return; - port->type = PORT_BCM63XX; - } -} - -/* - * serial core request to check that port information in serinfo are - * suitable - */ -static int bcm_uart_verify_port(struct uart_port *port, - struct serial_struct *serinfo) -{ - if (port->type != PORT_BCM63XX) - return -EINVAL; - if (port->irq != serinfo->irq) - return -EINVAL; - if (port->iotype != serinfo->io_type) - return -EINVAL; - if (port->mapbase != (unsigned long)serinfo->iomem_base) - return -EINVAL; - return 0; -} - -/* serial core callbacks */ -static struct uart_ops bcm_uart_ops = { - .tx_empty = bcm_uart_tx_empty, - .get_mctrl = bcm_uart_get_mctrl, - .set_mctrl = bcm_uart_set_mctrl, - .start_tx = bcm_uart_start_tx, - .stop_tx = bcm_uart_stop_tx, - .stop_rx = bcm_uart_stop_rx, - .enable_ms = bcm_uart_enable_ms, - .break_ctl = bcm_uart_break_ctl, - .startup = bcm_uart_startup, - .shutdown = bcm_uart_shutdown, - .set_termios = bcm_uart_set_termios, - .type = bcm_uart_type, - .release_port = bcm_uart_release_port, - .request_port = bcm_uart_request_port, - .config_port = bcm_uart_config_port, - .verify_port = bcm_uart_verify_port, -}; - - - -#ifdef CONFIG_SERIAL_BCM63XX_CONSOLE -static inline void wait_for_xmitr(struct uart_port *port) -{ - unsigned int tmout; - - /* Wait up to 10ms for the character(s) to be sent. */ - tmout = 10000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_IR_REG); - if (val & UART_IR_STAT(UART_IR_TXEMPTY)) - break; - udelay(1); - } - - /* Wait up to 1s for flow control if necessary */ - if (port->flags & UPF_CONS_FLOW) { - tmout = 1000000; - while (--tmout) { - unsigned int val; - - val = bcm_uart_readl(port, UART_EXTINP_REG); - if (val & UART_EXTINP_CTS_MASK) - break; - udelay(1); - } - } -} - -/* - * output given char - */ -static void bcm_console_putchar(struct uart_port *port, int ch) -{ - wait_for_xmitr(port); - bcm_uart_writel(port, ch, UART_FIFO_REG); -} - -/* - * console core request to output given string - */ -static void bcm_console_write(struct console *co, const char *s, - unsigned int count) -{ - struct uart_port *port; - unsigned long flags; - int locked; - - port = &ports[co->index]; - - local_irq_save(flags); - if (port->sysrq) { - /* bcm_uart_interrupt() already took the lock */ - locked = 0; - } else if (oops_in_progress) { - locked = spin_trylock(&port->lock); - } else { - spin_lock(&port->lock); - locked = 1; - } - - /* call helper to deal with \r\n */ - uart_console_write(port, s, count, bcm_console_putchar); - - /* and wait for char to be transmitted */ - wait_for_xmitr(port); - - if (locked) - spin_unlock(&port->lock); - local_irq_restore(flags); -} - -/* - * console core request to setup given console, find matching uart - * port and setup it. - */ -static int bcm_console_setup(struct console *co, char *options) -{ - struct uart_port *port; - int baud = 9600; - int bits = 8; - int parity = 'n'; - int flow = 'n'; - - if (co->index < 0 || co->index >= BCM63XX_NR_UARTS) - return -EINVAL; - port = &ports[co->index]; - if (!port->membase) - return -ENODEV; - if (options) - uart_parse_options(options, &baud, &parity, &bits, &flow); - - return uart_set_options(port, co, baud, parity, bits, flow); -} - -static struct uart_driver bcm_uart_driver; - -static struct console bcm63xx_console = { - .name = "ttyS", - .write = bcm_console_write, - .device = uart_console_device, - .setup = bcm_console_setup, - .flags = CON_PRINTBUFFER, - .index = -1, - .data = &bcm_uart_driver, -}; - -static int __init bcm63xx_console_init(void) -{ - register_console(&bcm63xx_console); - return 0; -} - -console_initcall(bcm63xx_console_init); - -#define BCM63XX_CONSOLE &bcm63xx_console -#else -#define BCM63XX_CONSOLE NULL -#endif /* CONFIG_SERIAL_BCM63XX_CONSOLE */ - -static struct uart_driver bcm_uart_driver = { - .owner = THIS_MODULE, - .driver_name = "bcm63xx_uart", - .dev_name = "ttyS", - .major = TTY_MAJOR, - .minor = 64, - .nr = 1, - .cons = BCM63XX_CONSOLE, -}; - -/* - * platform driver probe/remove callback - */ -static int __devinit bcm_uart_probe(struct platform_device *pdev) -{ - struct resource *res_mem, *res_irq; - struct uart_port *port; - struct clk *clk; - int ret; - - if (pdev->id < 0 || pdev->id >= BCM63XX_NR_UARTS) - return -EINVAL; - - if (ports[pdev->id].membase) - return -EBUSY; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res_mem) - return -ENODEV; - - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_irq) - return -ENODEV; - - clk = clk_get(&pdev->dev, "periph"); - if (IS_ERR(clk)) - return -ENODEV; - - port = &ports[pdev->id]; - memset(port, 0, sizeof(*port)); - port->iotype = UPIO_MEM; - port->mapbase = res_mem->start; - port->irq = res_irq->start; - port->ops = &bcm_uart_ops; - port->flags = UPF_BOOT_AUTOCONF; - port->dev = &pdev->dev; - port->fifosize = 16; - port->uartclk = clk_get_rate(clk) / 2; - clk_put(clk); - - ret = uart_add_one_port(&bcm_uart_driver, port); - if (ret) { - kfree(port); - return ret; - } - platform_set_drvdata(pdev, port); - return 0; -} - -static int __devexit bcm_uart_remove(struct platform_device *pdev) -{ - struct uart_port *port; - - port = platform_get_drvdata(pdev); - uart_remove_one_port(&bcm_uart_driver, port); - platform_set_drvdata(pdev, NULL); - /* mark port as free */ - ports[pdev->id].membase = 0; - return 0; -} - -/* - * platform driver stuff - */ -static struct platform_driver bcm_uart_platform_driver = { - .probe = bcm_uart_probe, - .remove = __devexit_p(bcm_uart_remove), - .driver = { - .owner = THIS_MODULE, - .name = "bcm63xx_uart", - }, -}; - -static int __init bcm_uart_init(void) -{ - int ret; - - ret = uart_register_driver(&bcm_uart_driver); - if (ret) - return ret; - - ret = platform_driver_register(&bcm_uart_platform_driver); - if (ret) - uart_unregister_driver(&bcm_uart_driver); - - return ret; -} - -static void __exit bcm_uart_exit(void) -{ - platform_driver_unregister(&bcm_uart_platform_driver); - uart_unregister_driver(&bcm_uart_driver); -} - -module_init(bcm_uart_init); -module_exit(bcm_uart_exit); - -MODULE_AUTHOR("Maxime Bizon <mbizon@freebox.fr>"); -MODULE_DESCRIPTION("Broadcom 63<xx integrated uart driver"); -MODULE_LICENSE("GPL"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/spi/bcm63xx_spi.c b/target/linux/brcm63xx/files-2.6.30/drivers/spi/bcm63xx_spi.c deleted file mode 100644 index a20de302d2..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/spi/bcm63xx_spi.c +++ /dev/null @@ -1,445 +0,0 @@ -/* - * Broadcom BCM63xx SPI controller support - * - * Copyright (C) 2009 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/interrupt.h> -#include <linux/spi/spi.h> -#include <linux/spi/spi_bitbang.h> -#include <linux/gpio.h> -#include <linux/completion.h> -#include <linux/err.h> - -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_dev_spi.h> - -#define PFX KBUILD_MODNAME -#define DRV_VER "0.1.2" - -struct bcm63xx_spi { - /* bitbang has to be first */ - struct spi_bitbang bitbang; - struct completion done; - - void __iomem *regs; - int irq; - - /* Platform data */ - u32 speed_hz; - unsigned fifo_size; - - /* Data buffers */ - const unsigned char *tx_ptr; - unsigned char *rx_ptr; - int remaining_bytes; - - struct clk *clk; - struct resource *ioarea; - struct platform_device *pdev; -}; - -static void bcm63xx_spi_chipselect(struct spi_device *spi, int is_on) -{ - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); - u16 val; - - val = bcm_spi_readw(bs->regs, SPI_CMD); - if (is_on == BITBANG_CS_INACTIVE) - val |= SPI_CMD_NOOP; - else if (is_on == BITBANG_CS_ACTIVE) - val |= (1 << spi->chip_select << SPI_CMD_DEVICE_ID_SHIFT); - - bcm_spi_writew(val, bs->regs, SPI_CMD); -} - -static int bcm63xx_spi_setup_transfer(struct spi_device *spi, - struct spi_transfer *t) -{ - u8 bits_per_word; - u8 clk_cfg; - u32 hz; - unsigned int div; - - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); - - bits_per_word = (t) ? t->bits_per_word : spi->bits_per_word; - hz = (t) ? t->speed_hz : spi->max_speed_hz; - if (bits_per_word != 8) { - dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n", - __func__, bits_per_word); - return -EINVAL; - } - - if (spi->chip_select > spi->master->num_chipselect) { - dev_err(&spi->dev, "%s, unsupported slave %d\n", - __func__, spi->chip_select); - return -EINVAL; - } - - /* Check clock setting */ - div = (bs->speed_hz / hz); - switch (div) { - case 2: - clk_cfg = SPI_CLK_25MHZ; - break; - case 4: - clk_cfg = SPI_CLK_12_50MHZ; - break; - case 8: - clk_cfg = SPI_CLK_6_250MHZ; - break; - case 16: - clk_cfg = SPI_CLK_3_125MHZ; - break; - case 32: - clk_cfg = SPI_CLK_1_563MHZ; - break; - case 128: - clk_cfg = SPI_CLK_0_781MHZ; - break; - case 64: - default: - /* Set to slowest mode for compatibility */ - clk_cfg = SPI_CLK_0_781MHZ; - break; - } - - bcm_spi_writeb(clk_cfg, bs->regs, SPI_CLK_CFG); - dev_dbg(&spi->dev, "Setting clock register to %d (hz %d, cmd %02x)\n", - div, hz, clk_cfg); - - return 0; -} - -/* the spi->mode bits understood by this driver: */ -#define MODEBITS (SPI_CPOL | SPI_CPHA) - -static int bcm63xx_spi_setup(struct spi_device *spi) -{ - struct spi_bitbang *bitbang; - struct bcm63xx_spi *bs; - int retval; - - bs = spi_master_get_devdata(spi->master); - bitbang = &bs->bitbang; - - if (!spi->bits_per_word) - spi->bits_per_word = 8; - - if (spi->mode & ~MODEBITS) { - dev_err(&spi->dev, "%s, unsupported mode bits %x\n", - __func__, spi->mode & ~MODEBITS); - return -EINVAL; - } - - retval = bcm63xx_spi_setup_transfer(spi, NULL); - if (retval < 0) { - dev_err(&spi->dev, "setup: unsupported mode bits %x\n", - spi->mode & ~MODEBITS); - return retval; - } - - dev_dbg(&spi->dev, "%s, mode %d, %u bits/w, %u nsec/bit\n", - __func__, spi->mode & MODEBITS, spi->bits_per_word, 0); - - return 0; -} - -/* Fill the TX FIFO with as many bytes as possible */ -static void bcm63xx_spi_fill_tx_fifo(struct bcm63xx_spi *bs) -{ - u8 tail; - - /* Fill the Tx FIFO with as many bytes as possible */ - tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL); - while ((tail < bs->fifo_size) && (bs->remaining_bytes > 0)) { - if (bs->tx_ptr) - bcm_spi_writeb(*bs->tx_ptr++, bs->regs, SPI_MSG_DATA); - else - bcm_spi_writeb(0, bs->regs, SPI_MSG_DATA); - bs->remaining_bytes--; - tail = bcm_spi_readb(bs->regs, SPI_MSG_TAIL); - } -} - -static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) -{ - struct bcm63xx_spi *bs = spi_master_get_devdata(spi->master); - u8 msg_ctl; - u16 cmd; - - dev_dbg(&spi->dev, "txrx: tx %p, rx %p, len %d\n", - t->tx_buf, t->rx_buf, t->len); - - /* Transmitter is inhibited */ - bs->tx_ptr = t->tx_buf; - bs->rx_ptr = t->rx_buf; - bs->remaining_bytes = t->len; - init_completion(&bs->done); - - bcm63xx_spi_fill_tx_fifo(bs); - - /* Enable the command done interrupt which - * we use to determine completion of a command */ - bcm_spi_writeb(SPI_INTR_CMD_DONE, bs->regs, SPI_INT_MASK); - - /* Fill in the Message control register */ - msg_ctl = bcm_spi_readb(bs->regs, SPI_MSG_CTL); - msg_ctl |= (t->len << SPI_BYTE_CNT_SHIFT); - msg_ctl |= (SPI_FD_RW << SPI_MSG_TYPE_SHIFT); - bcm_spi_writeb(msg_ctl, bs->regs, SPI_MSG_CTL); - - /* Issue the transfer */ - cmd = bcm_spi_readb(bs->regs, SPI_CMD); - cmd |= SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(cmd, bs->regs, SPI_CMD); - - wait_for_completion(&bs->done); - - /* Disable the CMD_DONE interrupt */ - bcm_spi_writeb(~(SPI_INTR_CMD_DONE), bs->regs, SPI_INT_MASK); - - return t->len - bs->remaining_bytes; -} - -/* This driver supports single master mode only. Hence - * CMD_DONE is the only interrupt we care about - */ -static irqreturn_t bcm63xx_spi_interrupt(int irq, void *dev_id) -{ - struct spi_master *master = (struct spi_master *)dev_id; - struct bcm63xx_spi *bs = spi_master_get_devdata(master); - u8 intr; - u16 cmd; - - /* Read interupts and clear them immediately */ - intr = bcm_spi_readb(bs->regs, SPI_INT_STATUS); - bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK); - - /* A tansfer completed */ - if (intr & SPI_INTR_CMD_DONE) { - u8 rx_empty; - - rx_empty = bcm_spi_readb(bs->regs, SPI_ST); - /* Read out all the data */ - while ((rx_empty & SPI_RX_EMPTY) == 0) { - u8 data; - - data = bcm_spi_readb(bs->regs, SPI_RX_DATA); - if (bs->rx_ptr) - *bs->rx_ptr++ = data; - - rx_empty = bcm_spi_readb(bs->regs, SPI_RX_EMPTY); - } - - /* See if there is more data to send */ - if (bs->remaining_bytes > 0) { - bcm63xx_spi_fill_tx_fifo(bs); - - /* Start the transfer */ - cmd = bcm_spi_readb(bs->regs, SPI_CMD); - cmd |= SPI_CMD_START_IMMEDIATE; - cmd |= (0 << SPI_CMD_PREPEND_BYTE_CNT_SHIFT); - bcm_spi_writeb(cmd, bs->regs, SPI_CMD); - } else - complete(&bs->done); - } - - return IRQ_HANDLED; -} - - -static int __init bcm63xx_spi_probe(struct platform_device *pdev) -{ - struct resource *r; - struct bcm63xx_spi_pdata *pdata = pdev->dev.platform_data; - int irq; - struct spi_master *master; - struct clk *clk; - struct bcm63xx_spi *bs; - int ret; - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - ret = -ENXIO; - goto out; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = -ENXIO; - goto out; - } - - clk = clk_get(&pdev->dev, "spi"); - if (IS_ERR(clk)) { - dev_err(&pdev->dev, "No clock for device\n"); - ret = -ENODEV; - goto out; - } - - master = spi_alloc_master(&pdev->dev, sizeof(struct bcm63xx_spi)); - if (!master) { - ret = -ENOMEM; - goto out_free; - } - - bs = spi_master_get_devdata(master); - bs->bitbang.master = spi_master_get(master); - bs->bitbang.chipselect = bcm63xx_spi_chipselect; - bs->bitbang.setup_transfer = bcm63xx_spi_setup_transfer; - bs->bitbang.txrx_bufs = bcm63xx_txrx_bufs; - bs->bitbang.master->setup = bcm63xx_spi_setup; - init_completion(&bs->done); - - platform_set_drvdata(pdev, master); - bs->pdev = pdev; - - if (!request_mem_region(r->start, - r->end - r->start, PFX)) { - ret = -ENXIO; - goto out_free; - } - - bs->regs = ioremap_nocache(r->start, r->end - r->start); - if (!bs->regs) { - printk(KERN_ERR PFX " unable to ioremap regs\n"); - ret = -ENOMEM; - goto out_free; - } - bs->irq = irq; - bs->clk = clk; - bs->fifo_size = pdata->fifo_size; - - ret = request_irq(irq, bcm63xx_spi_interrupt, 0, - pdev->name, master); - if (ret) { - printk(KERN_ERR PFX " unable to request irq\n"); - goto out_unmap; - } - - master->bus_num = pdata->bus_num; - master->num_chipselect = pdata->num_chipselect; - bs->speed_hz = pdata->speed_hz; - - /* Initialize hardware */ - clk_enable(bs->clk); - bcm_spi_writeb(SPI_INTR_CLEAR_ALL, bs->regs, SPI_INT_MASK); - - dev_info(&pdev->dev, " at 0x%08x (irq %d, FIFOs size %d) v%s\n", - r->start, irq, bs->fifo_size, DRV_VER); - - ret = spi_bitbang_start(&bs->bitbang); - if (ret) { - dev_err(&pdev->dev, "spi_bitbang_start FAILED\n"); - goto out_reset_hw; - } - - return ret; - -out_reset_hw: - clk_disable(clk); - free_irq(irq, master); -out_unmap: - iounmap(bs->regs); -out_free: - clk_put(clk); - spi_master_put(master); -out: - return ret; -} - -static int __exit bcm63xx_spi_remove(struct platform_device *pdev) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct bcm63xx_spi *bs = spi_master_get_devdata(master); - - spi_bitbang_stop(&bs->bitbang); - clk_disable(bs->clk); - clk_put(bs->clk); - free_irq(bs->irq, master); - iounmap(bs->regs); - platform_set_drvdata(pdev, 0); - spi_master_put(bs->bitbang.master); - - return 0; -} - -#ifdef CONFIG_PM -static int bcm63xx_spi_suspend(struct platform_device *pdev, pm_message_t mesg) -{ - struct spi_master *master = platform_get_drvdata(pdev); - struct bcm63xx_spi *bs = spi_master_get_devdata(master); - - clk_disable(bs->clk); - - return 0; -} - -static int bcm63xx_spi_resume(struct platform_device *pdev) -{ - struct bcm63xx_spi *bs = spi_master_get_devdata(master); - struct bcm63xx_spi *bs = spi_master_get_devdata(master); - - clk_enable(bs->clk); - - return 0; -} -#else -#define bcm63xx_spi_suspend NULL -#define bcm63xx_spi_resume NULL -#endif - -static struct platform_driver bcm63xx_spi_driver = { - .driver = { - .name = "bcm63xx-spi", - .owner = THIS_MODULE, - }, - .probe = bcm63xx_spi_probe, - .remove = bcm63xx_spi_remove, - .suspend = bcm63xx_spi_suspend, - .resume = bcm63xx_spi_resume, -}; - - -static int __init bcm63xx_spi_init(void) -{ - return platform_driver_register(&bcm63xx_spi_driver); -} - -static void __exit bcm63xx_spi_exit(void) -{ - platform_driver_unregister(&bcm63xx_spi_driver); -} - -module_init(bcm63xx_spi_init); -module_exit(bcm63xx_spi_exit); - -MODULE_ALIAS("platform:bcm63xx_spi"); -MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -MODULE_DESCRIPTION("Broadcom BCM63xx SPI Controller driver"); -MODULE_LICENSE("GPL"); -MODULE_VERSION(DRV_VER); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ehci-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ehci-bcm63xx.c deleted file mode 100644 index 2fef5716e3..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ehci-bcm63xx.c +++ /dev/null @@ -1,152 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -static int ehci_bcm63xx_setup(struct usb_hcd *hcd) -{ - struct ehci_hcd *ehci = hcd_to_ehci(hcd); - int retval; - - retval = ehci_halt(ehci); - if (retval) - return retval; - - retval = ehci_init(hcd); - if (retval) - return retval; - - hcd->has_tt = 1; - ehci_reset(ehci); - ehci_port_power(ehci, 0); - - return retval; -} - - -static const struct hc_driver ehci_bcm63xx_hc_driver = { - .description = hcd_name, - .product_desc = "BCM63XX integrated EHCI controller", - .hcd_priv_size = sizeof(struct ehci_hcd), - - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2, - - .reset = ehci_bcm63xx_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - - .get_frame_number = ehci_get_frame, - - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, -}; - -static int __devinit ehci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -{ - struct resource *res_mem, *res_irq; - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - u32 reg; - int ret; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_mem || !res_irq) - return -ENODEV; - - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); - reg &= ~USBH_PRIV_SWAP_EHCI_DATA_MASK; - reg |= USBH_PRIV_SWAP_EHCI_ENDN_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); - - /* don't ask... */ - bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); - - hcd = usb_create_hcd(&ehci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = res_mem->end - res_mem->start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed\n"); - ret = -EBUSY; - goto out; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("ioremap failed\n"); - ret = -EIO; - goto out1; - } - - ehci = hcd_to_ehci(hcd); - ehci->big_endian_mmio = 1; - ehci->big_endian_desc = 0; - ehci->caps = hcd->regs; - ehci->regs = hcd->regs + - HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase)); - ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params); - ehci->sbrn = 0x20; - - ret = usb_add_hcd(hcd, res_irq->start, IRQF_DISABLED); - if (ret) - goto out2; - - platform_set_drvdata(pdev, hcd); - return 0; - -out2: - iounmap(hcd->regs); -out1: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -out: - usb_put_hcd(hcd); - return ret; -} - -static int __devexit ehci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - - hcd = platform_get_drvdata(pdev); - usb_remove_hcd(hcd); - iounmap(hcd->regs); - usb_put_hcd(hcd); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - platform_set_drvdata(pdev, NULL); - return 0; -} - -static struct platform_driver ehci_hcd_bcm63xx_driver = { - .probe = ehci_hcd_bcm63xx_drv_probe, - .remove = __devexit_p(ehci_hcd_bcm63xx_drv_remove), - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "bcm63xx_ehci", - .owner = THIS_MODULE, - .bus = &platform_bus_type - }, -}; - -MODULE_ALIAS("platform:bcm63xx_ehci"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ohci-bcm63xx.c b/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ohci-bcm63xx.c deleted file mode 100644 index 08807d9899..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/usb/host/ohci-bcm63xx.c +++ /dev/null @@ -1,159 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2008 Maxime Bizon <mbizon@freebox.fr> - */ - -#include <linux/init.h> -#include <linux/clk.h> -#include <linux/platform_device.h> -#include <bcm63xx_cpu.h> -#include <bcm63xx_regs.h> -#include <bcm63xx_io.h> - -static struct clk *usb_host_clock; - -static int __devinit ohci_bcm63xx_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - if (ret < 0) - return ret; - - /* FIXME: autodetected port 2 is shared with USB slave */ - - ret = ohci_run(ohci); - if (ret < 0) { - err("can't start %s", hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - return 0; -} - -static const struct hc_driver ohci_bcm63xx_hc_driver = { - .description = hcd_name, - .product_desc = "BCM63XX integrated OHCI controller", - .hcd_priv_size = sizeof(struct ohci_hcd), - - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - .start = ohci_bcm63xx_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - .get_frame_number = ohci_get_frame, - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - .start_port_reset = ohci_start_port_reset, -}; - -static int __devinit ohci_hcd_bcm63xx_drv_probe(struct platform_device *pdev) -{ - struct resource *res_mem, *res_irq; - struct usb_hcd *hcd; - struct ohci_hcd *ohci; - u32 reg; - int ret; - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res_mem || !res_irq) - return -ENODEV; - - if (BCMCPU_IS_6348()) { - struct clk *clk; - /* enable USB host clock */ - clk = clk_get(&pdev->dev, "usbh"); - if (IS_ERR(clk)) - return -ENODEV; - - clk_enable(clk); - usb_host_clock = clk; - bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG); - - } else if (BCMCPU_IS_6358()) { - reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_REG); - reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK; - reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK; - bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_REG); - /* don't ask... */ - bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020, USBH_PRIV_TEST_REG); - } else - return 0; - - hcd = usb_create_hcd(&ohci_bcm63xx_hc_driver, &pdev->dev, "bcm63xx"); - if (!hcd) - return -ENOMEM; - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = res_mem->end - res_mem->start + 1; - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) { - pr_debug("request_mem_region failed\n"); - ret = -EBUSY; - goto out; - } - - hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len); - if (!hcd->regs) { - pr_debug("ioremap failed\n"); - ret = -EIO; - goto out1; - } - - ohci = hcd_to_ohci(hcd); - ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC | - OHCI_QUIRK_FRAME_NO; - ohci_hcd_init(ohci); - - ret = usb_add_hcd(hcd, res_irq->start, IRQF_DISABLED); - if (ret) - goto out2; - - platform_set_drvdata(pdev, hcd); - return 0; - -out2: - iounmap(hcd->regs); -out1: - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); -out: - usb_put_hcd(hcd); - return ret; -} - -static int __devexit ohci_hcd_bcm63xx_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - - hcd = platform_get_drvdata(pdev); - usb_remove_hcd(hcd); - iounmap(hcd->regs); - usb_put_hcd(hcd); - release_mem_region(hcd->rsrc_start, hcd->rsrc_len); - if (usb_host_clock) { - clk_disable(usb_host_clock); - clk_put(usb_host_clock); - } - platform_set_drvdata(pdev, NULL); - return 0; -} - -static struct platform_driver ohci_hcd_bcm63xx_driver = { - .probe = ohci_hcd_bcm63xx_drv_probe, - .remove = __devexit_p(ohci_hcd_bcm63xx_drv_remove), - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = "bcm63xx_ohci", - .owner = THIS_MODULE, - .bus = &platform_bus_type - }, -}; - -MODULE_ALIAS("platform:bcm63xx_ohci"); diff --git a/target/linux/brcm63xx/files-2.6.30/drivers/watchdog/bcm63xx_wdt.c b/target/linux/brcm63xx/files-2.6.30/drivers/watchdog/bcm63xx_wdt.c deleted file mode 100644 index 8d58ccd8b3..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/drivers/watchdog/bcm63xx_wdt.c +++ /dev/null @@ -1,334 +0,0 @@ -/* - * Broadcom BCM63xx SoC watchdog driver - * - * Copyright (C) 2007, Miguel Gaio <miguel.gaio@efixo.com> - * Copyright (C) 2008, Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - */ - -#include <linux/bitops.h> -#include <linux/errno.h> -#include <linux/fs.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/miscdevice.h> -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/reboot.h> -#include <linux/types.h> -#include <linux/uaccess.h> -#include <linux/watchdog.h> -#include <linux/timer.h> -#include <linux/jiffies.h> -#include <linux/resource.h> -#include <linux/platform_device.h> - -#include <bcm63xx_cpu.h> -#include <bcm63xx_io.h> -#include <bcm63xx_regs.h> - -#define PFX KBUILD_MODNAME - -#define WDT_HZ 50000000 /* Fclk */ -#define WDT_DEFAULT_TIME 30 /* seconds */ -#define WDT_MAX_TIME 256 /* seconds */ - -static struct { - void __iomem *regs; - struct timer_list timer; - int default_ticks; - unsigned long inuse; - atomic_t ticks; -} bcm63xx_wdt_device; - -static int expect_close; -static int timeout; - -static int wdt_time = WDT_DEFAULT_TIME; -static int nowayout = WATCHDOG_NOWAYOUT; -module_param(nowayout, int, 0); -MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" - __MODULE_STRING(WATCHDOG_NOWAYOUT) ")"); - -/* HW functions */ -static void bcm63xx_wdt_hw_start(void) -{ - bcm_writel(0xfffffffe, bcm63xx_wdt_device.regs + WDT_DEFVAL_REG); - bcm_writel(WDT_START_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); - bcm_writel(WDT_START_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -} - -static void bcm63xx_wdt_hw_stop(void) -{ - bcm_writel(WDT_STOP_1, bcm63xx_wdt_device.regs + WDT_CTL_REG); - bcm_writel(WDT_STOP_2, bcm63xx_wdt_device.regs + WDT_CTL_REG); -} - -static void bcm63xx_timer_tick(unsigned long unused) -{ - if (!atomic_dec_and_test(&bcm63xx_wdt_device.ticks)) { - bcm63xx_wdt_hw_start(); - mod_timer(&bcm63xx_wdt_device.timer, jiffies + HZ); - } else - printk(KERN_CRIT PFX ": watchdog will restart system\n"); -} - -static void bcm63xx_wdt_pet(void) -{ - atomic_set(&bcm63xx_wdt_device.ticks, wdt_time); -} - -static void bcm63xx_wdt_start(void) -{ - bcm63xx_wdt_pet(); - bcm63xx_timer_tick(0); -} - -static void bcm63xx_wdt_pause(void) -{ - del_timer_sync(&bcm63xx_wdt_device.timer); - bcm63xx_wdt_hw_stop(); -} - -static int bcm63xx_wdt_settimeout(int new_time) -{ - if ((new_time <= 0) || (new_time > WDT_MAX_TIME)) - return -EINVAL; - - wdt_time = new_time; - - return 0; -} - -static int bcm63xx_wdt_open(struct inode *inode, struct file *file) -{ - if (test_and_set_bit(0, &bcm63xx_wdt_device.inuse)) - return -EBUSY; - - bcm63xx_wdt_start(); - return nonseekable_open(inode, file); -} - -static int bcm63xx_wdt_release(struct inode *inode, struct file *file) -{ - if (expect_close == 42) - bcm63xx_wdt_pause(); - else { - printk(KERN_CRIT PFX - ": Unexpected close, not stopping watchdog!\n"); - bcm63xx_wdt_start(); - } - clear_bit(0, &bcm63xx_wdt_device.inuse); - expect_close = 0; - return 0; -} - -static ssize_t bcm63xx_wdt_write(struct file *file, const char *data, - size_t len, loff_t *ppos) -{ - if (len) { - if (!nowayout) { - size_t i; - - /* In case it was set long ago */ - expect_close = 0; - - for (i = 0; i != len; i++) { - char c; - if (get_user(c, data + i)) - return -EFAULT; - if (c == 'V') - expect_close = 42; - } - } - bcm63xx_wdt_pet(); - } - return len; -} - -static struct watchdog_info bcm63xx_wdt_info = { - .identity = PFX, - .options = WDIOF_SETTIMEOUT | - WDIOF_KEEPALIVEPING | - WDIOF_MAGICCLOSE, -}; - - -static long bcm63xx_wdt_ioctl(struct file *file, unsigned int cmd, - unsigned long arg) -{ - void __user *argp = (void __user *)arg; - int __user *p = argp; - int new_value, retval = -EINVAL; - - switch (cmd) { - case WDIOC_GETSUPPORT: - return copy_to_user(argp, &bcm63xx_wdt_info, - sizeof(bcm63xx_wdt_info)) ? -EFAULT : 0; - - case WDIOC_GETSTATUS: - case WDIOC_GETBOOTSTATUS: - return put_user(0, p); - - case WDIOC_SETOPTIONS: - if (get_user(new_value, p)) - return -EFAULT; - - if (new_value & WDIOS_DISABLECARD) { - bcm63xx_wdt_pause(); - retval = 0; - } - if (new_value & WDIOS_ENABLECARD) { - bcm63xx_wdt_start(); - retval = 0; - } - - return retval; - - case WDIOC_KEEPALIVE: - bcm63xx_wdt_pet(); - return 0; - - case WDIOC_SETTIMEOUT: - if (get_user(new_value, p)) - return -EFAULT; - - if (bcm63xx_wdt_settimeout(new_value)) - return -EINVAL; - - bcm63xx_wdt_pet(); - - case WDIOC_GETTIMEOUT: - return put_user(wdt_time, p); - - default: - return -ENOTTY; - - } -} - -static int bcm63xx_wdt_notify_sys(struct notifier_block *this, - unsigned long code, void *unused) -{ - if (code == SYS_DOWN || code == SYS_HALT) - bcm63xx_wdt_pause(); - return NOTIFY_DONE; -} - -static const struct file_operations bcm63xx_wdt_fops = { - .owner = THIS_MODULE, - .llseek = no_llseek, - .write = bcm63xx_wdt_write, - .unlocked_ioctl = bcm63xx_wdt_ioctl, - .open = bcm63xx_wdt_open, - .release = bcm63xx_wdt_release, -}; - -static struct miscdevice bcm63xx_wdt_miscdev = { - .minor = WATCHDOG_MINOR, - .name = "watchdog", - .fops = &bcm63xx_wdt_fops, -}; - -static struct notifier_block bcm63xx_wdt_notifier = { - .notifier_call = bcm63xx_wdt_notify_sys, -}; - - -static int bcm63xx_wdt_probe(struct platform_device *pdev) -{ - int ret; - struct resource *r; - - setup_timer(&bcm63xx_wdt_device.timer, bcm63xx_timer_tick, 0L); - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - printk(KERN_ERR PFX - "failed to retrieve resources\n"); - return -ENODEV; - } - - bcm63xx_wdt_device.regs = ioremap_nocache(r->start, r->end - r->start); - if (!bcm63xx_wdt_device.regs) { - printk(KERN_ERR PFX - "failed to remap I/O resources\n"); - return -ENXIO; - } - - if (bcm63xx_wdt_settimeout(wdt_time)) { - bcm63xx_wdt_settimeout(WDT_DEFAULT_TIME); - printk(KERN_INFO PFX - ": wdt_time value must be 1 <= wdt_time <= 256, using %d\n", - wdt_time); - } - - ret = register_reboot_notifier(&bcm63xx_wdt_notifier); - if (ret) { - printk(KERN_ERR PFX - "failed to register reboot_notifier\n"); - return ret; - } - - ret = misc_register(&bcm63xx_wdt_miscdev); - if (ret < 0) { - printk(KERN_ERR PFX - "failed to register watchdog device\n"); - goto unmap; - } - - printk(KERN_INFO PFX " started, timer margin: %d sec\n", WDT_DEFAULT_TIME); - - return 0; - -unmap: - unregister_reboot_notifier(&bcm63xx_wdt_notifier); - iounmap(bcm63xx_wdt_device.regs); - return ret; -} - -static int bcm63xx_wdt_remove(struct platform_device *pdev) -{ - if (!nowayout) - bcm63xx_wdt_pause(); - - misc_deregister(&bcm63xx_wdt_miscdev); - - iounmap(bcm63xx_wdt_device.regs); - - unregister_reboot_notifier(&bcm63xx_wdt_notifier); - - return 0; -} - -static struct platform_driver bcm63xx_wdt = { - .probe = bcm63xx_wdt_probe, - .remove = bcm63xx_wdt_remove, - .driver = { - .name = "bcm63xx-wdt", - } -}; - -static int __init bcm63xx_wdt_init(void) -{ - return platform_driver_register(&bcm63xx_wdt); -} - -static void __exit bcm63xx_wdt_exit(void) -{ - platform_driver_unregister(&bcm63xx_wdt); -} - -module_init(bcm63xx_wdt_init); -module_exit(bcm63xx_wdt_exit); - -MODULE_AUTHOR("Miguel Gaio <miguel.gaio@efixo.com>"); -MODULE_AUTHOR("Florian Fainelli <florian@openwrt.org>"); -MODULE_DESCRIPTION("Driver for the Broadcom BCM63xx SoC watchdog"); -MODULE_LICENSE("GPL"); -MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); -MODULE_ALIAS("platform:bcm63xx-wdt"); diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_board.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_board.h deleted file mode 100644 index fa3e7e617b..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_board.h +++ /dev/null @@ -1,12 +0,0 @@ -#ifndef BCM63XX_BOARD_H_ -#define BCM63XX_BOARD_H_ - -const char *board_get_name(void); - -void board_prom_init(void); - -void board_setup(void); - -int board_register_devices(void); - -#endif /* ! BCM63XX_BOARD_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h deleted file mode 100644 index 8fcf8df441..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_clk.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef BCM63XX_CLK_H_ -#define BCM63XX_CLK_H_ - -struct clk { - void (*set)(struct clk *, int); - unsigned int rate; - unsigned int usage; - int id; -}; - -#endif /* ! BCM63XX_CLK_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h deleted file mode 100644 index e27bd5b3d0..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cpu.h +++ /dev/null @@ -1,673 +0,0 @@ -#ifndef BCM63XX_CPU_H_ -#define BCM63XX_CPU_H_ - -#include <linux/types.h> -#include <linux/init.h> - -#include <bcm63xx_regs.h> - -/* - * Macro to fetch bcm63xx cpu id and revision, should be optimized at - * compile time if only one CPU support is enabled (idea stolen from - * arm mach-types) - */ -#define BCM6338_CPU_ID 0x6338 -#define BCM6345_CPU_ID 0x6345 -#define BCM6348_CPU_ID 0x6348 -#define BCM6358_CPU_ID 0x6358 - -void __init bcm63xx_cpu_init(void); -u16 __bcm63xx_get_cpu_id(void); -u16 bcm63xx_get_cpu_rev(void); -unsigned int bcm63xx_get_cpu_freq(void); - -#ifdef CONFIG_BCM63XX_CPU_6338 -# ifdef bcm63xx_get_cpu_id -# undef bcm63xx_get_cpu_id -# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() -# define BCMCPU_RUNTIME_DETECT -# else -# define bcm63xx_get_cpu_id() BCM6338_CPU_ID -# endif -# define BCMCPU_IS_6338() (bcm63xx_get_cpu_id() == BCM6338_CPU_ID) -#else -# define BCMCPU_IS_6338() (0) -#endif - -#ifdef CONFIG_BCM63XX_CPU_6345 -# ifdef bcm63xx_get_cpu_id -# undef bcm63xx_get_cpu_id -# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() -# define BCMCPU_RUNTIME_DETECT -# else -# define bcm63xx_get_cpu_id() BCM6345_CPU_ID -# endif -# define BCMCPU_IS_6345() (bcm63xx_get_cpu_id() == BCM6345_CPU_ID) -#else -# define BCMCPU_IS_6345() (0) -#endif - -#ifdef CONFIG_BCM63XX_CPU_6348 -# ifdef bcm63xx_get_cpu_id -# undef bcm63xx_get_cpu_id -# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() -# define BCMCPU_RUNTIME_DETECT -# else -# define bcm63xx_get_cpu_id() BCM6348_CPU_ID -# endif -# define BCMCPU_IS_6348() (bcm63xx_get_cpu_id() == BCM6348_CPU_ID) -#else -# define BCMCPU_IS_6348() (0) -#endif - -#ifdef CONFIG_BCM63XX_CPU_6358 -# ifdef bcm63xx_get_cpu_id -# undef bcm63xx_get_cpu_id -# define bcm63xx_get_cpu_id() __bcm63xx_get_cpu_id() -# define BCMCPU_RUNTIME_DETECT -# else -# define bcm63xx_get_cpu_id() BCM6358_CPU_ID -# endif -# define BCMCPU_IS_6358() (bcm63xx_get_cpu_id() == BCM6358_CPU_ID) -#else -# define BCMCPU_IS_6358() (0) -#endif - -#ifndef bcm63xx_get_cpu_id -#error "No CPU support configured" -#endif - -/* - * While registers sets are (mostly) the same across 63xx CPU, base - * address of these sets do change. - */ -enum bcm63xx_regs_set { - RSET_DSL_LMEM = 0, - RSET_PERF, - RSET_TIMER, - RSET_WDT, - RSET_UART0, - RSET_GPIO, - RSET_SPI, - RSET_UDC0, - RSET_OHCI0, - RSET_OHCI_PRIV, - RSET_USBH_PRIV, - RSET_MPI, - RSET_PCMCIA, - RSET_DSL, - RSET_ENET0, - RSET_ENET1, - RSET_ENETDMA, - RSET_EHCI0, - RSET_SDRAM, - RSET_MEMC, - RSET_DDR, -}; - -#define RSET_DSL_LMEM_SIZE (64 * 1024 * 4) -#define RSET_DSL_SIZE 4096 -#define RSET_WDT_SIZE 12 -#define RSET_ENET_SIZE 2048 -#define RSET_ENETDMA_SIZE 2048 -#define RSET_UART_SIZE 24 -#define RSET_SPI_SIZE 256 -#define RSET_UDC_SIZE 256 -#define RSET_OHCI_SIZE 256 -#define RSET_EHCI_SIZE 256 -#define RSET_PCMCIA_SIZE 12 - -/* - * 6338 register sets base address - */ - -#define BCM_6338_DSL_LMEM_BASE (0xfff00000) -#define BCM_6338_PERF_BASE (0xfffe0000) -#define BCM_6338_BB_BASE (0xfffe0100) -#define BCM_6338_TIMER_BASE (0xfffe0200) -#define BCM_6338_WDT_BASE (0xfffe021c) -#define BCM_6338_UART0_BASE (0xfffe0300) -#define BCM_6338_GPIO_BASE (0xfffe0400) -#define BCM_6338_SPI_BASE (0xfffe0c00) -#define BCM_6338_UDC0_BASE (0xfffe3000) -#define BCM_6338_USBDMA_BASE (0xfffe2400) -#define BCM_6338_OHCI0_BASE (0xdeadbeef) -#define BCM_6338_OHCI_PRIV_BASE (0xdeadbeef) -#define BCM_6338_USBH_PRIV_BASE (0xdeadbeef) -#define BCM_6338_MPI_BASE (0xfffe3160) -#define BCM_6338_PCMCIA_BASE (0xdeadbeef) -#define BCM_6338_SDRAM_REGS_BASE (0xfffe3100) -#define BCM_6338_DSL_BASE (0xfffe1000) -#define BCM_6338_SAR_BASE (0xfffe2000) -#define BCM_6338_UBUS_BASE (0xdeadbeef) -#define BCM_6338_ENET0_BASE (0xfffe2800) -#define BCM_6338_ENET1_BASE (0xdeadbeef) -#define BCM_6338_ENETDMA_BASE (0xfffe2400) -#define BCM_6338_EHCI0_BASE (0xdeadbeef) -#define BCM_6338_SDRAM_BASE (0xfffe3100) -#define BCM_6338_MEMC_BASE (0xdeadbeef) -#define BCM_6338_DDR_BASE (0xdeadbeef) - -/* - * 6345 register sets base address - */ -#define BCM_6345_DSL_LMEM_BASE (0xfff00000) -#define BCM_6345_PERF_BASE (0xfffe0000) -#define BCM_6345_BB_BASE (0xfffe0100) -#define BCM_6345_TIMER_BASE (0xfffe0200) -#define BCM_6345_WDT_BASE (0xfffe021c) -#define BCM_6345_UART0_BASE (0xfffe0300) -#define BCM_6345_GPIO_BASE (0xfffe0400) -#define BCM_6345_SPI_BASE (0xdeadbeef) -#define BCM_6345_UDC0_BASE (0xfffe2100) -#define BCM_6345_USBDMA_BASE (0xfffe2b00) -#define BCM_6345_ENET0_BASE (0xfffe1800) -#define BCM_6345_ENETDMA_BASE (0xfffe2800) -#define BCM_6345_PCMCIA_BASE (0xfffe2028) -#define BCM_6345_MPI_BASE (0xdeadbeef) -#define BCM_6345_OHCI0_BASE (0xdeadbeef) -#define BCM_6345_OHCI_PRIV_BASE (0xdeadbeef) -#define BCM_6345_USBH_PRIV_BASE (0xdeadbeef) -#define BCM_6345_SDRAM_REGS_BASE (0xfffe2300) -#define BCM_6345_DSL_BASE (0xdeadbeef) -#define BCM_6345_SAR_BASE (0xdeadbeef) -#define BCM_6345_UBUS_BASE (0xdeadbeef) -#define BCM_6345_ENET1_BASE (0xdeadbeef) -#define BCM_6345_EHCI0_BASE (0xdeadbeef) -#define BCM_6345_SDRAM_BASE (0xfffe2300) -#define BCM_6345_MEMC_BASE (0xdeadbeef) -#define BCM_6345_DDR_BASE (0xdeadbeef) - -/* - * 6348 register sets base address - */ -#define BCM_6348_DSL_LMEM_BASE (0xfff00000) -#define BCM_6348_PERF_BASE (0xfffe0000) -#define BCM_6348_BB_BASE (0xfffe0100) -#define BCM_6348_TIMER_BASE (0xfffe0200) -#define BCM_6348_WDT_BASE (0xfffe021c) -#define BCM_6348_UART0_BASE (0xfffe0300) -#define BCM_6348_GPIO_BASE (0xfffe0400) -#define BCM_6348_SPI_BASE (0xfffe0c00) -#define BCM_6348_UDC0_BASE (0xfffe1000) -#define BCM_6348_USBDMA_BASE (0xfffe1400) -#define BCM_6348_OHCI0_BASE (0xfffe1b00) -#define BCM_6348_OHCI_PRIV_BASE (0xfffe1c00) -#define BCM_6348_USBH_PRIV_BASE (0xdeadbeef) -#define BCM_6348_MPI_BASE (0xfffe2000) -#define BCM_6348_PCMCIA_BASE (0xfffe2054) -#define BCM_6348_SDRAM_REGS_BASE (0xfffe2300) -#define BCM_6348_DSL_BASE (0xfffe3000) -#define BCM_6348_SAR_BASE (0xfffe4000) -#define BCM_6348_UBUS_BASE (0xfffe5000) -#define BCM_6348_ENET0_BASE (0xfffe6000) -#define BCM_6348_ENET1_BASE (0xfffe6800) -#define BCM_6348_ENETDMA_BASE (0xfffe7000) -#define BCM_6348_EHCI0_BASE (0xdeadbeef) -#define BCM_6348_SDRAM_BASE (0xfffe2300) -#define BCM_6348_MEMC_BASE (0xdeadbeef) -#define BCM_6348_DDR_BASE (0xdeadbeef) - -/* - * 6358 register sets base address - */ -#define BCM_6358_DSL_LMEM_BASE (0xfff00000) -#define BCM_6358_PERF_BASE (0xfffe0000) -#define BCM_6358_TIMER_BASE (0xfffe0040) -#define BCM_6358_WDT_BASE (0xfffe005c) -#define BCM_6358_GPIO_BASE (0xfffe0080) -#define BCM_6358_UART0_BASE (0xfffe0100) -#define BCM_6358_UDC0_BASE (0xfffe0400) -#define BCM_6358_SPI_BASE (0xfffe0800) -#define BCM_6358_MPI_BASE (0xfffe1000) -#define BCM_6358_PCMCIA_BASE (0xfffe1054) -#define BCM_6358_OHCI0_BASE (0xfffe1400) -#define BCM_6358_OHCI_PRIV_BASE (0xdeadbeef) -#define BCM_6358_USBH_PRIV_BASE (0xfffe1500) -#define BCM_6358_SDRAM_REGS_BASE (0xfffe2300) -#define BCM_6358_DSL_BASE (0xfffe3000) -#define BCM_6358_ENET0_BASE (0xfffe4000) -#define BCM_6358_ENET1_BASE (0xfffe4800) -#define BCM_6358_ENETDMA_BASE (0xfffe5000) -#define BCM_6358_EHCI0_BASE (0xfffe1300) -#define BCM_6358_SDRAM_BASE (0xdeadbeef) -#define BCM_6358_MEMC_BASE (0xfffe1200) -#define BCM_6358_DDR_BASE (0xfffe12a0) - - -extern const unsigned long *bcm63xx_regs_base; - -static inline unsigned long bcm63xx_regset_address(enum bcm63xx_regs_set set) -{ -#ifdef BCMCPU_RUNTIME_DETECT - return bcm63xx_regs_base[set]; -#else -#ifdef CONFIG_BCM63XX_CPU_6338 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6338_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6338_PERF_BASE; - case RSET_TIMER: - return BCM_6338_TIMER_BASE; - case RSET_WDT: - return BCM_6338_WDT_BASE; - case RSET_UART0: - return BCM_6338_UART0_BASE; - case RSET_GPIO: - return BCM_6338_GPIO_BASE; - case RSET_SPI: - return BCM_6338_SPI_BASE; - case RSET_UDC0: - return BCM_6338_UDC0_BASE; - case RSET_OHCI0: - return BCM_6338_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6338_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6338_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6338_MPI_BASE; - case RSET_PCMCIA: - return BCM_6338_PCMCIA_BASE; - case RSET_DSL: - return BCM_6338_DSL_BASE; - case RSET_ENET0: - return BCM_6338_ENET0_BASE; - case RSET_ENET1: - return BCM_6338_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6338_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6338_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6338_SDRAM_BASE; - case RSET_MEMC: - return BCM_6338_MEMC_BASE; - case RSET_DDR: - return BCM_6338_DDR_BASE; - } -#endif -#ifdef CONFIG_BCM63XX_CPU_6345 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6345_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6345_PERF_BASE; - case RSET_TIMER: - return BCM_6345_TIMER_BASE; - case RSET_WDT: - return BCM_6345_WDT_BASE; - case RSET_UART0: - return BCM_6345_UART0_BASE; - case RSET_GPIO: - return BCM_6345_GPIO_BASE; - case RSET_SPI: - return BCM_6345_SPI_BASE; - case RSET_UDC0: - return BCM_6345_UDC0_BASE; - case RSET_OHCI0: - return BCM_6345_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6345_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6345_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6345_MPI_BASE; - case RSET_PCMCIA: - return BCM_6345_PCMCIA_BASE; - case RSET_DSL: - return BCM_6345_DSL_BASE; - case RSET_ENET0: - return BCM_6345_ENET0_BASE; - case RSET_ENET1: - return BCM_6345_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6345_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6345_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6345_SDRAM_BASE; - case RSET_MEMC: - return BCM_6345_MEMC_BASE; - case RSET_DDR: - return BCM_6345_DDR_BASE; - } -#endif -#ifdef CONFIG_BCM63XX_CPU_6348 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6348_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6348_PERF_BASE; - case RSET_TIMER: - return BCM_6348_TIMER_BASE; - case RSET_WDT: - return BCM_6348_WDT_BASE; - case RSET_UART0: - return BCM_6348_UART0_BASE; - case RSET_GPIO: - return BCM_6348_GPIO_BASE; - case RSET_SPI: - return BCM_6348_SPI_BASE; - case RSET_UDC0: - return BCM_6348_UDC0_BASE; - case RSET_OHCI0: - return BCM_6348_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6348_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6348_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6348_MPI_BASE; - case RSET_PCMCIA: - return BCM_6348_PCMCIA_BASE; - case RSET_DSL: - return BCM_6348_DSL_BASE; - case RSET_ENET0: - return BCM_6348_ENET0_BASE; - case RSET_ENET1: - return BCM_6348_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6348_ENETDMA_BASE; - case RSET_EHCI0: - return BCM_6348_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6348_SDRAM_BASE; - case RSET_MEMC: - return BCM_6348_MEMC_BASE; - case RSET_DDR: - return BCM_6348_DDR_BASE; - } -#endif -#ifdef CONFIG_BCM63XX_CPU_6358 - switch (set) { - case RSET_DSL_LMEM: - return BCM_6358_DSL_LMEM_BASE; - case RSET_PERF: - return BCM_6358_PERF_BASE; - case RSET_TIMER: - return BCM_6358_TIMER_BASE; - case RSET_WDT: - return BCM_6358_WDT_BASE; - case RSET_UART0: - return BCM_6358_UART0_BASE; - case RSET_GPIO: - return BCM_6358_GPIO_BASE; - case RSET_SPI: - return BCM_6358_SPI_BASE; - case RSET_UDC0: - return BCM_6358_UDC0_BASE; - case RSET_OHCI0: - return BCM_6358_OHCI0_BASE; - case RSET_OHCI_PRIV: - return BCM_6358_OHCI_PRIV_BASE; - case RSET_USBH_PRIV: - return BCM_6358_USBH_PRIV_BASE; - case RSET_MPI: - return BCM_6358_MPI_BASE; - case RSET_PCMCIA: - return BCM_6358_PCMCIA_BASE; - case RSET_ENET0: - return BCM_6358_ENET0_BASE; - case RSET_ENET1: - return BCM_6358_ENET1_BASE; - case RSET_ENETDMA: - return BCM_6358_ENETDMA_BASE; - case RSET_DSL: - return BCM_6358_DSL_BASE; - case RSET_EHCI0: - return BCM_6358_EHCI0_BASE; - case RSET_SDRAM: - return BCM_6358_SDRAM_BASE; - case RSET_MEMC: - return BCM_6358_MEMC_BASE; - case RSET_DDR: - return BCM_6358_DDR_BASE; - } -#endif -#endif - /* unreached */ - return 0; -} - -/* - * SPI register layout is not compatible - * accross CPU versions but it is software - * compatible - */ - -enum bcm63xx_regs_spi { - SPI_CMD, - SPI_INT_STATUS, - SPI_INT_MASK_ST, - SPI_INT_MASK, - SPI_ST, - SPI_CLK_CFG, - SPI_FILL_BYTE, - SPI_MSG_TAIL, - SPI_RX_TAIL, - SPI_MSG_CTL, - SPI_MSG_DATA, - SPI_RX_DATA, -}; - -extern const unsigned long *bcm63xx_regs_spi; - -static inline unsigned long bcm63xx_spireg(enum bcm63xx_regs_spi reg) -{ -#ifdef BCMCPU_RUNTIME_DETECT - return bcm63xx_regs_spi[reg]; -#else -#ifdef CONFIG_BCM63XX_CPU_6338 -switch (reg) { - case SPI_CMD: - return SPI_BCM_6338_SPI_CMD; - case SPI_INT_STATUS: - return SPI_BCM_6338_SPI_INT_STATUS; - case SPI_INT_MASK_ST: - return SPI_BCM_6338_SPI_MASK_INT_ST; - case SPI_INT_MASK: - return SPI_BCM_6338_SPI_INT_MASK; - case SPI_ST: - return SPI_BCM_6338_SPI_ST; - case SPI_CLK_CFG: - return SPI_BCM_6338_SPI_CLK_CFG; - case SPI_FILL_BYTE: - return SPI_BCM_6338_SPI_FILL_BYTE; - case SPI_MSG_TAIL: - return SPI_BCM_6338_SPI_MSG_TAIL; - case SPI_RX_TAIL: - return SPI_BCM_6338_SPI_RX_TAIL; - case SPI_MSG_CTL: - return SPI_BCM_6338_SPI_MSG_CTL; - case SPI_MSG_DATA: - return SPI_BCM_6338_SPI_MSG_DATA; - case SPI_RX_DATA: - return SPI_BCM_6338_SPI_RX_DATA; -} -#endif -#ifdef CONFIG_BCM63XX_CPU_6348 -switch (reg) { - case SPI_CMD: - return SPI_BCM_6348_SPI_CMD; - case SPI_INT_MASK_ST: - return SPI_BCM_6348_SPI_MASK_INT_ST; - case SPI_INT_MASK: - return SPI_BCM_6348_SPI_INT_MASK; - case SPI_INT_STATUS: - return SPI_BCM_6348_SPI_INT_STATUS; - case SPI_ST: - return SPI_BCM_6348_SPI_ST; - case SPI_CLK_CFG: - return SPI_BCM_6348_SPI_CLK_CFG; - case SPI_FILL_BYTE: - return SPI_BCM_6348_SPI_FILL_BYTE; - case SPI_MSG_TAIL: - return SPI_BCM_6348_SPI_MSG_TAIL; - case SPI_RX_TAIL: - return SPI_BCM_6348_SPI_RX_TAIL; - case SPI_MSG_CTL: - return SPI_BCM_6348_SPI_MSG_CTL; - case SPI_MSG_DATA: - return SPI_BCM_6348_SPI_MSG_DATA; - case SPI_RX_DATA: - return SPI_BCM_6348_SPI_RX_DATA; -} -#endif -#ifdef CONFIG_BCM63XX_CPU_6358 -switch (reg) { - case SPI_CMD: - return SPI_BCM_6358_SPI_CMD; - case SPI_INT_STATUS: - return SPI_BCM_6358_SPI_INT_STATUS; - case SPI_INT_MASK_ST: - return SPI_BCM_6358_SPI_MASK_INT_ST; - case SPI_INT_MASK: - return SPI_BCM_6358_SPI_INT_MASK; - case SPI_ST: - return SPI_BCM_6358_SPI_STATUS; - case SPI_CLK_CFG: - return SPI_BCM_6358_SPI_CLK_CFG; - case SPI_FILL_BYTE: - return SPI_BCM_6358_SPI_FILL_BYTE; - case SPI_MSG_TAIL: - return SPI_BCM_6358_SPI_MSG_TAIL; - case SPI_RX_TAIL: - return SPI_BCM_6358_SPI_RX_TAIL; - case SPI_MSG_CTL: - return SPI_BCM_6358_MSG_CTL; - case SPI_MSG_DATA: - return SPI_BCM_6358_SPI_MSG_DATA; - case SPI_RX_DATA: - return SPI_BCM_6358_SPI_RX_DATA; -} -#endif -#endif - return 0; -} - -/* - * IRQ number changes across CPU too - */ -enum bcm63xx_irq { - IRQ_TIMER = 0, - IRQ_UART0, - IRQ_SPI, - IRQ_DSL, - IRQ_UDC0, - IRQ_ENET0, - IRQ_ENET1, - IRQ_ENET_PHY, - IRQ_OHCI0, - IRQ_EHCI0, - IRQ_PCMCIA0, - IRQ_ENET0_RXDMA, - IRQ_ENET0_TXDMA, - IRQ_ENET1_RXDMA, - IRQ_ENET1_TXDMA, - IRQ_PCI, - IRQ_PCMCIA, -}; - -/* - * 6338 irqs - */ -#define BCM_6338_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6338_SPI_IRQ (IRQ_INTERNAL_BASE + 1) -#define BCM_6338_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6338_DG_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6338_DSL_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6338_ATM_IRQ (IRQ_INTERNAL_BASE + 6) -#define BCM_6338_UDC0_IRQ (IRQ_INTERNAL_BASE + 7) -#define BCM_6338_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) -#define BCM_6338_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) -#define BCM_6338_SDRAM_IRQ (IRQ_INTERNAL_BASE + 10) -#define BCM_6338_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 11) -#define BCM_6338_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 12) -#define BCM_6338_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13) -#define BCM_6338_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) -#define BCM_6338_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) -#define BCM_6338_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) -#define BCM_6338_SDIO_IRQ (IRQ_INTERNAL_BASE + 17) - -/* - * 6345 irqs - */ -#define BCM_6345_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6345_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6345_DSL_IRQ (IRQ_INTERNAL_BASE + 3) -#define BCM_6345_ATM_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6345_UDC0_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6345_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) -#define BCM_6345_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 12) -#define BCM_6345_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 1) -#define BCM_6345_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 13 + 2) -#define BCM_6345_EBI_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 5) -#define BCM_6345_EBI_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 6) -#define BCM_6345_RESERVED_RX_IRQ (IRQ_INTERNAL_BASE + 13 + 9) -#define BCM_6345_RESERVED_TX_IRQ (IRQ_INTERNAL_BASE + 13 + 10) -#define BCM_6345_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 13) -#define BCM_6345_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 14) -#define BCM_6345_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 15) -#define BCM_6345_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 16) -#define BCM_6345_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 17) -#define BCM_6345_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 13 + 18) - -/* - * 6348 irqs - */ -#define BCM_6348_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6348_SPI_IRQ (IRQ_INTERNAL_BASE + 1) -#define BCM_6348_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6348_DSL_IRQ (IRQ_INTERNAL_BASE + 4) -#define BCM_6348_UDC0_IRQ (IRQ_INTERNAL_BASE + 6) -#define BCM_6348_ENET1_IRQ (IRQ_INTERNAL_BASE + 7) -#define BCM_6348_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) -#define BCM_6348_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) -#define BCM_6348_OHCI0_IRQ (IRQ_INTERNAL_BASE + 12) -#define BCM_6348_USB_CNTL_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 14) -#define BCM_6348_USB_CNTL_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 15) -#define BCM_6348_USB_BULK_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 16) -#define BCM_6348_USB_BULK_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 17) -#define BCM_6348_USB_ISO_RX_DMA_IRQ (IRQ_INTERNAL_BASE + 18) -#define BCM_6348_USB_ISO_TX_DMA_IRQ (IRQ_INTERNAL_BASE + 19) -#define BCM_6348_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 20) -#define BCM_6348_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 21) -#define BCM_6348_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 22) -#define BCM_6348_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 23) -#define BCM_6348_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) -#define BCM_6348_PCI_IRQ (IRQ_INTERNAL_BASE + 24) - -/* - * 6358 irqs - */ -#define BCM_6358_TIMER_IRQ (IRQ_INTERNAL_BASE + 0) -#define BCM_6358_SPI_IRQ (IRQ_INTERNAL_BASE + 1) -#define BCM_6358_UART0_IRQ (IRQ_INTERNAL_BASE + 2) -#define BCM_6358_OHCI0_IRQ (IRQ_INTERNAL_BASE + 5) -#define BCM_6358_ENET1_IRQ (IRQ_INTERNAL_BASE + 6) -#define BCM_6358_ENET0_IRQ (IRQ_INTERNAL_BASE + 8) -#define BCM_6358_ENET_PHY_IRQ (IRQ_INTERNAL_BASE + 9) -#define BCM_6358_EHCI0_IRQ (IRQ_INTERNAL_BASE + 10) -#define BCM_6358_ENET0_RXDMA_IRQ (IRQ_INTERNAL_BASE + 15) -#define BCM_6358_ENET0_TXDMA_IRQ (IRQ_INTERNAL_BASE + 16) -#define BCM_6358_ENET1_RXDMA_IRQ (IRQ_INTERNAL_BASE + 17) -#define BCM_6358_ENET1_TXDMA_IRQ (IRQ_INTERNAL_BASE + 18) -#define BCM_6358_DSL_IRQ (IRQ_INTERNAL_BASE + 29) -#define BCM_6358_PCI_IRQ (IRQ_INTERNAL_BASE + 31) -#define BCM_6358_PCMCIA_IRQ (IRQ_INTERNAL_BASE + 24) - -extern const int *bcm63xx_irqs; - -static inline int bcm63xx_get_irq_number(enum bcm63xx_irq irq) -{ - return bcm63xx_irqs[irq]; -} - -/* - * return installed memory size - */ -unsigned int bcm63xx_get_memory_size(void); - -#endif /* !BCM63XX_CPU_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h deleted file mode 100644 index b1821c866e..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_cs.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef BCM63XX_CS_H -#define BCM63XX_CS_H - -int bcm63xx_set_cs_base(unsigned int cs, u32 base, unsigned int size); -int bcm63xx_set_cs_timing(unsigned int cs, unsigned int wait, - unsigned int setup, unsigned int hold); -int bcm63xx_set_cs_param(unsigned int cs, u32 flags); -int bcm63xx_set_cs_status(unsigned int cs, int enable); - -#endif /* !BCM63XX_CS_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_dsp.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_dsp.h deleted file mode 100644 index b587d45c30..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_dsp.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __BCM63XX_DSP_H -#define __BCM63XX_DSP_H - -struct bcm63xx_dsp_platform_data { - unsigned gpio_rst; - unsigned gpio_int; - unsigned cs; - unsigned ext_irq; -}; - -int __init bcm63xx_dsp_register(const struct bcm63xx_dsp_platform_data *pd); - -#endif /* __BCM63XX_DSP_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h deleted file mode 100644 index d53f611184..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_enet.h +++ /dev/null @@ -1,45 +0,0 @@ -#ifndef BCM63XX_DEV_ENET_H_ -#define BCM63XX_DEV_ENET_H_ - -#include <linux/if_ether.h> -#include <linux/init.h> - -/* - * on board ethernet platform data - */ -struct bcm63xx_enet_platform_data { - char mac_addr[ETH_ALEN]; - - int has_phy; - - /* if has_phy, then set use_internal_phy */ - int use_internal_phy; - - /* or fill phy info to use an external one */ - int phy_id; - int has_phy_interrupt; - int phy_interrupt; - - /* if has_phy, use autonegociated pause parameters or force - * them */ - int pause_auto; - int pause_rx; - int pause_tx; - - /* if !has_phy, set desired forced speed/duplex */ - int force_speed_100; - int force_duplex_full; - - /* if !has_phy, set callback to perform mii device - * init/remove */ - int (*mii_config)(struct net_device *dev, int probe, - int (*mii_read)(struct net_device *dev, - int phy_id, int reg), - void (*mii_write)(struct net_device *dev, - int phy_id, int reg, int val)); -}; - -int __init bcm63xx_enet_register(int unit, - const struct bcm63xx_enet_platform_data *pd); - -#endif /* ! BCM63XX_DEV_ENET_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h deleted file mode 100644 index c549344b70..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pci.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_PCI_H_ -#define BCM63XX_DEV_PCI_H_ - -extern int bcm63xx_pci_enabled; - -#endif /* BCM63XX_DEV_PCI_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h deleted file mode 100644 index 2beb3969ce..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_pcmcia.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef BCM63XX_DEV_PCMCIA_H_ -#define BCM63XX_DEV_PCMCIA_H_ - -/* - * PCMCIA driver platform data - */ -struct bcm63xx_pcmcia_platform_data { - unsigned int ready_gpio; -}; - -int bcm63xx_pcmcia_register(void); - -#endif /* BCM63XX_DEV_PCMCIA_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_spi.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_spi.h deleted file mode 100644 index cfa79bf94b..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_spi.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef BCM63XX_DEV_SPI_H -#define BCM63XX_DEV_SPI_H - -#include <linux/types.h> - -int __init bcm63xx_spi_register(void); - -struct bcm63xx_spi_pdata { - unsigned int fifo_size; - int bus_num; - int num_chipselect; - u32 speed_hz; -}; - -#endif /* BCM63XX_DEV_SPI_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h deleted file mode 100644 index bf348f573b..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_uart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_UART_H_ -#define BCM63XX_DEV_UART_H_ - -int bcm63xx_uart_register(void); - -#endif /* BCM63XX_DEV_UART_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h deleted file mode 100644 index 17fb519dde..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ehci.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_USB_EHCI_H_ -#define BCM63XX_DEV_USB_EHCI_H_ - -int bcm63xx_ehci_register(void); - -#endif /* BCM63XX_DEV_USB_EHCI_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h deleted file mode 100644 index 518a04d03f..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_ohci.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_USB_OHCI_H_ -#define BCM63XX_DEV_USB_OHCI_H_ - -int bcm63xx_ohci_register(void); - -#endif /* BCM63XX_DEV_USB_OHCI_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_udc.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_udc.h deleted file mode 100644 index 54d37f0bc7..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_usb_udc.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_USB_UDC_H_ -#define BCM63XX_DEV_USB_UDC_H_ - -int bcm63xx_udc_register(void); - -#endif /* BCM63XX_DEV_USB_UDC_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_wdt.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_wdt.h deleted file mode 100644 index 4aae2c7966..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_dev_wdt.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef BCM63XX_DEV_WDT_H_ -#define BCM63XX_DEV_WDT_H_ - -int bcm63xx_wdt_register(void); - -#endif /* BCM63XX_DEV_WDT_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h deleted file mode 100644 index 43d4da0b1e..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_gpio.h +++ /dev/null @@ -1,26 +0,0 @@ -#ifndef BCM63XX_GPIO_H -#define BCM63XX_GPIO_H - -#include <linux/init.h> - -int __init bcm63xx_gpio_init(void); - -static inline unsigned long bcm63xx_gpio_count(void) -{ - switch (bcm63xx_get_cpu_id()) { - case BCM6358_CPU_ID: - return 40; - case BCM6338_CPU_ID: - return 8; - case BCM6345_CPU_ID: - return 16; - case BCM6348_CPU_ID: - default: - return 37; - } -} - -#define GPIO_DIR_OUT 0x0 -#define GPIO_DIR_IN 0x1 - -#endif /* !BCM63XX_GPIO_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_io.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_io.h deleted file mode 100644 index 31e950e117..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_io.h +++ /dev/null @@ -1,107 +0,0 @@ -#ifndef BCM63XX_IO_H_ -#define BCM63XX_IO_H_ - -#include "bcm63xx_cpu.h" - -/* - * Physical memory map, RAM is mapped at 0x0. - * - * Note that size MUST be a power of two. - */ -#define BCM_PCMCIA_COMMON_BASE_PA (0x20000000) -#define BCM_PCMCIA_COMMON_SIZE (16 * 1024 * 1024) -#define BCM_PCMCIA_COMMON_END_PA (BCM_PCMCIA_COMMON_BASE_PA + \ - BCM_PCMCIA_COMMON_SIZE - 1) - -#define BCM_PCMCIA_ATTR_BASE_PA (0x21000000) -#define BCM_PCMCIA_ATTR_SIZE (16 * 1024 * 1024) -#define BCM_PCMCIA_ATTR_END_PA (BCM_PCMCIA_ATTR_BASE_PA + \ - BCM_PCMCIA_ATTR_SIZE - 1) - -#define BCM_PCMCIA_IO_BASE_PA (0x22000000) -#define BCM_PCMCIA_IO_SIZE (64 * 1024) -#define BCM_PCMCIA_IO_END_PA (BCM_PCMCIA_IO_BASE_PA + \ - BCM_PCMCIA_IO_SIZE - 1) - -#define BCM_PCI_MEM_BASE_PA (0x30000000) -#define BCM_PCI_MEM_SIZE (128 * 1024 * 1024) -#define BCM_PCI_MEM_END_PA (BCM_PCI_MEM_BASE_PA + \ - BCM_PCI_MEM_SIZE - 1) - -#define BCM_PCI_IO_BASE_PA (0x08000000) -#define BCM_PCI_IO_SIZE (64 * 1024) -#define BCM_PCI_IO_END_PA (BCM_PCI_IO_BASE_PA + \ - BCM_PCI_IO_SIZE - 1) -#define BCM_PCI_IO_HALF_PA (BCM_PCI_IO_BASE_PA + \ - (BCM_PCI_IO_SIZE / 2) - 1) - -#define BCM_CB_MEM_BASE_PA (0x38000000) -#define BCM_CB_MEM_SIZE (128 * 1024 * 1024) -#define BCM_CB_MEM_END_PA (BCM_CB_MEM_BASE_PA + \ - BCM_CB_MEM_SIZE - 1) - - -/* - * Internal registers are accessed through KSEG3 - */ -#define BCM_REGS_VA(x) ((void __iomem *)(x)) - -#define bcm_readb(a) (*(volatile unsigned char *) BCM_REGS_VA(a)) -#define bcm_readw(a) (*(volatile unsigned short *) BCM_REGS_VA(a)) -#define bcm_readl(a) (*(volatile unsigned int *) BCM_REGS_VA(a)) -#define bcm_writeb(v,a) (*(volatile unsigned char *) BCM_REGS_VA((a)) = (v)) -#define bcm_writew(v,a) (*(volatile unsigned short *) BCM_REGS_VA((a)) = (v)) -#define bcm_writel(v,a) (*(volatile unsigned int *) BCM_REGS_VA((a)) = (v)) - -/* - * IO helpers to access register set for current CPU - */ -#define bcm_rset_readb(s,o) bcm_readb(bcm63xx_regset_address(s) + (o)) -#define bcm_rset_readw(s,o) bcm_readw(bcm63xx_regset_address(s) + (o)) -#define bcm_rset_readl(s,o) bcm_readl(bcm63xx_regset_address(s) + (o)) -#define bcm_rset_writeb(s,v,o) bcm_writeb((v), \ - bcm63xx_regset_address(s) + (o)) -#define bcm_rset_writew(s,v,o) bcm_writew((v), \ - bcm63xx_regset_address(s) + (o)) -#define bcm_rset_writel(s,v,o) bcm_writel((v), \ - bcm63xx_regset_address(s) + (o)) - -/* - * helpers for frequently used register sets - */ -#define bcm_perf_readl(o) bcm_rset_readl(RSET_PERF, (o)) -#define bcm_perf_writel(v,o) bcm_rset_writel(RSET_PERF, (v), (o)) -#define bcm_timer_readl(o) bcm_rset_readl(RSET_TIMER, (o)) -#define bcm_timer_writel(v,o) bcm_rset_writel(RSET_TIMER, (v), (o)) -#define bcm_wdt_readl(o) bcm_rset_readl(RSET_WDT, (o)) -#define bcm_wdt_writel(v,o) bcm_rset_writel(RSET_WDT, (v), (o)) -#define bcm_gpio_readl(o) bcm_rset_readl(RSET_GPIO, (o)) -#define bcm_gpio_writel(v,o) bcm_rset_writel(RSET_GPIO, (v), (o)) -#define bcm_uart0_readl(o) bcm_rset_readl(RSET_UART0, (o)) -#define bcm_uart0_writel(v,o) bcm_rset_writel(RSET_UART0, (v), (o)) -#define bcm_mpi_readl(o) bcm_rset_readl(RSET_MPI, (o)) -#define bcm_mpi_writel(v,o) bcm_rset_writel(RSET_MPI, (v), (o)) -#define bcm_pcmcia_readl(o) bcm_rset_readl(RSET_PCMCIA, (o)) -#define bcm_pcmcia_writel(v,o) bcm_rset_writel(RSET_PCMCIA, (v), (o)) -#define bcm_sdram_readl(o) bcm_rset_readl(RSET_SDRAM, (o)) -#define bcm_sdram_writel(v,o) bcm_rset_writel(RSET_SDRAM, (v), (o)) -#define bcm_memc_readl(o) bcm_rset_readl(RSET_MEMC, (o)) -#define bcm_memc_writel(v,o) bcm_rset_writel(RSET_MEMC, (v), (o)) -#define bcm_ddr_readl(o) bcm_rset_readl(RSET_DDR, (o)) -#define bcm_ddr_writel(v,o) bcm_rset_writel(RSET_DDR, (v), (o)) - -/* - * helpers for the SPI register sets - */ -#define bcm_spi_readb(b,o) bcm_readb((b) + \ - bcm63xx_spireg(o)) -#define bcm_spi_readw(b,o) bcm_readw((b) + \ - bcm63xx_spireg(o)) -#define bcm_spi_writeb(v,b,o) bcm_writeb((v), \ - (b) + \ - bcm63xx_spireg(o)) -#define bcm_spi_writew(v,b,o) bcm_writew((v), \ - (b) + \ - bcm63xx_spireg(o)) - -#endif /* ! BCM63XX_IO_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h deleted file mode 100644 index 5f95577c82..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_irq.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef BCM63XX_IRQ_H_ -#define BCM63XX_IRQ_H_ - -#include <bcm63xx_cpu.h> - -#define IRQ_MIPS_BASE 0 -#define IRQ_INTERNAL_BASE 8 - -#define IRQ_EXT_BASE (IRQ_MIPS_BASE + 3) -#define IRQ_EXT_0 (IRQ_EXT_BASE + 0) -#define IRQ_EXT_1 (IRQ_EXT_BASE + 1) -#define IRQ_EXT_2 (IRQ_EXT_BASE + 2) -#define IRQ_EXT_3 (IRQ_EXT_BASE + 3) - -#endif /* ! BCM63XX_IRQ_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h deleted file mode 100644 index e2cc60758e..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_regs.h +++ /dev/null @@ -1,886 +0,0 @@ -#ifndef BCM63XX_REGS_H_ -#define BCM63XX_REGS_H_ - -/************************************************************************* - * _REG relative to RSET_PERF - *************************************************************************/ - -/* Chip Identifier / Revision register */ -#define PERF_REV_REG 0x0 -#define REV_CHIPID_SHIFT 16 -#define REV_CHIPID_MASK (0xffff << REV_CHIPID_SHIFT) -#define REV_REVID_SHIFT 0 -#define REV_REVID_MASK (0xffff << REV_REVID_SHIFT) - -/* Clock Control register */ -#define PERF_CKCTL_REG 0x4 - -#define CKCTL_6338_ADSLPHY_EN (1 << 0) -#define CKCTL_6338_MPI_EN (1 << 1) -#define CKCTL_6338_DRAM_EN (1 << 2) -#define CKCTL_6338_ENET_EN (1 << 4) -#define CKCTL_6338_USBS_EN (1 << 4) -#define CKCTL_6338_SAR_EN (1 << 5) -#define CKCTL_6338_SPI_EN (1 << 9) - -#define CKCTL_6338_ALL_SAFE_EN (CKCTL_6338_ADSLPHY_EN | \ - CKCTL_6338_MPI_EN | \ - CKCTL_6338_ENET_EN | \ - CKCTL_6338_SAR_EN | \ - CKCTL_6338_SPI_EN) - -#define CKCTL_6345_CPU_EN (1 << 0) -#define CKCTL_6345_BUS_EN (1 << 1) -#define CKCTL_6345_EBI_EN (1 << 2) -#define CKCTL_6345_UART_EN (1 << 3) -#define CKCTL_6345_ADSLPHY_EN (1 << 4) -#define CKCTL_6345_ENET_EN (1 << 7) -#define CKCTL_6345_USBS_EN (1 << 8) - -#define CKCTL_6345_ALL_SAFE_EN (CKCTL_6345_ENET_EN | \ - CKCTL_6345_USBS_EN | \ - CKCTL_6345_ADSLPHY_EN) - -#define CKCTL_6348_ADSLPHY_EN (1 << 0) -#define CKCTL_6348_MPI_EN (1 << 1) -#define CKCTL_6348_SDRAM_EN (1 << 2) -#define CKCTL_6348_M2M_EN (1 << 3) -#define CKCTL_6348_ENET_EN (1 << 4) -#define CKCTL_6348_SAR_EN (1 << 5) -#define CKCTL_6348_USBS_EN (1 << 6) -#define CKCTL_6348_USBH_EN (1 << 8) -#define CKCTL_6348_SPI_EN (1 << 9) - -#define CKCTL_6348_ALL_SAFE_EN (CKCTL_6348_ADSLPHY_EN | \ - CKCTL_6348_M2M_EN | \ - CKCTL_6348_ENET_EN | \ - CKCTL_6348_SAR_EN | \ - CKCTL_6348_USBS_EN | \ - CKCTL_6348_USBH_EN | \ - CKCTL_6348_SPI_EN) - -#define CKCTL_6358_ENET_EN (1 << 4) -#define CKCTL_6358_ADSLPHY_EN (1 << 5) -#define CKCTL_6358_PCM_EN (1 << 8) -#define CKCTL_6358_SPI_EN (1 << 9) -#define CKCTL_6358_USBS_EN (1 << 10) -#define CKCTL_6358_SAR_EN (1 << 11) -#define CKCTL_6358_EMUSB_EN (1 << 17) -#define CKCTL_6358_ENET0_EN (1 << 18) -#define CKCTL_6358_ENET1_EN (1 << 19) -#define CKCTL_6358_USBSU_EN (1 << 20) -#define CKCTL_6358_EPHY_EN (1 << 21) - -#define CKCTL_6358_ALL_SAFE_EN (CKCTL_6358_ENET_EN | \ - CKCTL_6358_ADSLPHY_EN | \ - CKCTL_6358_PCM_EN | \ - CKCTL_6358_SPI_EN | \ - CKCTL_6358_USBS_EN | \ - CKCTL_6358_SAR_EN | \ - CKCTL_6358_EMUSB_EN | \ - CKCTL_6358_ENET0_EN | \ - CKCTL_6358_ENET1_EN | \ - CKCTL_6358_USBSU_EN | \ - CKCTL_6358_EPHY_EN) - -/* System PLL Control register */ -#define PERF_SYS_PLL_CTL_REG 0x8 -#define SYS_PLL_SOFT_RESET 0x1 - -/* Interrupt Mask register */ -#define PERF_IRQMASK_REG 0xc - -/* Interrupt Status register */ -#define PERF_IRQSTAT_REG 0x10 - -/* External Interrupt Configuration register */ -#define PERF_EXTIRQ_CFG_REG 0x14 -#define EXTIRQ_CFG_SENSE(x) (1 << (x)) -#define EXTIRQ_CFG_STAT(x) (1 << (x + 5)) -#define EXTIRQ_CFG_CLEAR(x) (1 << (x + 10)) -#define EXTIRQ_CFG_MASK(x) (1 << (x + 15)) -#define EXTIRQ_CFG_BOTHEDGE(x) (1 << (x + 20)) -#define EXTIRQ_CFG_LEVELSENSE(x) (1 << (x + 25)) - -#define EXTIRQ_CFG_CLEAR_ALL (0xf << 10) -#define EXTIRQ_CFG_MASK_ALL (0xf << 15) - -/* Soft Reset register */ -#define PERF_SOFTRESET_REG 0x28 - -#define SOFTRESET_6338_SPI_MASK (1 << 0) -#define SOFTRESET_6338_ENET_MASK (1 << 2) -#define SOFTRESET_6338_USBH_MASK (1 << 3) -#define SOFTRESET_6338_USBS_MASK (1 << 4) -#define SOFTRESET_6338_ADSL_MASK (1 << 5) -#define SOFTRESET_6338_DMAMEM_MASK (1 << 6) -#define SOFTRESET_6338_SAR_MASK (1 << 7) -#define SOFTRESET_6338_ACLC_MASK (1 << 8) -#define SOFTRESET_6338_ADSLMIPSPLL_MASK (1 << 10) -#define SOFTRESET_6338_ALL (SOFTRESET_6338_SPI_MASK | \ - SOFTRESET_6338_ENET_MASK | \ - SOFTRESET_6338_USBH_MASK | \ - SOFTRESET_6338_USBS_MASK | \ - SOFTRESET_6338_ADSL_MASK | \ - SOFTRESET_6338_DMAMEM_MASK | \ - SOFTRESET_6338_SAR_MASK | \ - SOFTRESET_6338_ACLC_MASK | \ - SOFTRESET_6338_ADSLMIPSPLL_MASK) - -#define SOFTRESET_6348_SPI_MASK (1 << 0) -#define SOFTRESET_6348_ENET_MASK (1 << 2) -#define SOFTRESET_6348_USBH_MASK (1 << 3) -#define SOFTRESET_6348_USBS_MASK (1 << 4) -#define SOFTRESET_6348_ADSL_MASK (1 << 5) -#define SOFTRESET_6348_DMAMEM_MASK (1 << 6) -#define SOFTRESET_6348_SAR_MASK (1 << 7) -#define SOFTRESET_6348_ACLC_MASK (1 << 8) -#define SOFTRESET_6348_ADSLMIPSPLL_MASK (1 << 10) - -#define SOFTRESET_6348_ALL (SOFTRESET_6348_SPI_MASK | \ - SOFTRESET_6348_ENET_MASK | \ - SOFTRESET_6348_USBH_MASK | \ - SOFTRESET_6348_USBS_MASK | \ - SOFTRESET_6348_ADSL_MASK | \ - SOFTRESET_6348_DMAMEM_MASK | \ - SOFTRESET_6348_SAR_MASK | \ - SOFTRESET_6348_ACLC_MASK | \ - SOFTRESET_6348_ADSLMIPSPLL_MASK) - -/* MIPS PLL control register */ -#define PERF_MIPSPLLCTL_REG 0x34 -#define MIPSPLLCTL_N1_SHIFT 20 -#define MIPSPLLCTL_N1_MASK (0x7 << MIPSPLLCTL_N1_SHIFT) -#define MIPSPLLCTL_N2_SHIFT 15 -#define MIPSPLLCTL_N2_MASK (0x1f << MIPSPLLCTL_N2_SHIFT) -#define MIPSPLLCTL_M1REF_SHIFT 12 -#define MIPSPLLCTL_M1REF_MASK (0x7 << MIPSPLLCTL_M1REF_SHIFT) -#define MIPSPLLCTL_M2REF_SHIFT 9 -#define MIPSPLLCTL_M2REF_MASK (0x7 << MIPSPLLCTL_M2REF_SHIFT) -#define MIPSPLLCTL_M1CPU_SHIFT 6 -#define MIPSPLLCTL_M1CPU_MASK (0x7 << MIPSPLLCTL_M1CPU_SHIFT) -#define MIPSPLLCTL_M1BUS_SHIFT 3 -#define MIPSPLLCTL_M1BUS_MASK (0x7 << MIPSPLLCTL_M1BUS_SHIFT) -#define MIPSPLLCTL_M2BUS_SHIFT 0 -#define MIPSPLLCTL_M2BUS_MASK (0x7 << MIPSPLLCTL_M2BUS_SHIFT) - -/* ADSL PHY PLL Control register */ -#define PERF_ADSLPLLCTL_REG 0x38 -#define ADSLPLLCTL_N1_SHIFT 20 -#define ADSLPLLCTL_N1_MASK (0x7 << ADSLPLLCTL_N1_SHIFT) -#define ADSLPLLCTL_N2_SHIFT 15 -#define ADSLPLLCTL_N2_MASK (0x1f << ADSLPLLCTL_N2_SHIFT) -#define ADSLPLLCTL_M1REF_SHIFT 12 -#define ADSLPLLCTL_M1REF_MASK (0x7 << ADSLPLLCTL_M1REF_SHIFT) -#define ADSLPLLCTL_M2REF_SHIFT 9 -#define ADSLPLLCTL_M2REF_MASK (0x7 << ADSLPLLCTL_M2REF_SHIFT) -#define ADSLPLLCTL_M1CPU_SHIFT 6 -#define ADSLPLLCTL_M1CPU_MASK (0x7 << ADSLPLLCTL_M1CPU_SHIFT) -#define ADSLPLLCTL_M1BUS_SHIFT 3 -#define ADSLPLLCTL_M1BUS_MASK (0x7 << ADSLPLLCTL_M1BUS_SHIFT) -#define ADSLPLLCTL_M2BUS_SHIFT 0 -#define ADSLPLLCTL_M2BUS_MASK (0x7 << ADSLPLLCTL_M2BUS_SHIFT) - -#define ADSLPLLCTL_VAL(n1,n2,m1ref,m2ref,m1cpu,m1bus,m2bus) \ - (((n1) << ADSLPLLCTL_N1_SHIFT) | \ - ((n2) << ADSLPLLCTL_N2_SHIFT) | \ - ((m1ref) << ADSLPLLCTL_M1REF_SHIFT) | \ - ((m2ref) << ADSLPLLCTL_M2REF_SHIFT) | \ - ((m1cpu) << ADSLPLLCTL_M1CPU_SHIFT) | \ - ((m1bus) << ADSLPLLCTL_M1BUS_SHIFT) | \ - ((m2bus) << ADSLPLLCTL_M2BUS_SHIFT)) - - -/************************************************************************* - * _REG relative to RSET_TIMER - *************************************************************************/ - -#define BCM63XX_TIMER_COUNT 4 -#define TIMER_T0_ID 0 -#define TIMER_T1_ID 1 -#define TIMER_T2_ID 2 -#define TIMER_WDT_ID 3 - -/* Timer irqstat register */ -#define TIMER_IRQSTAT_REG 0 -#define TIMER_IRQSTAT_TIMER_CAUSE(x) (1 << (x)) -#define TIMER_IRQSTAT_TIMER0_CAUSE (1 << 0) -#define TIMER_IRQSTAT_TIMER1_CAUSE (1 << 1) -#define TIMER_IRQSTAT_TIMER2_CAUSE (1 << 2) -#define TIMER_IRQSTAT_WDT_CAUSE (1 << 3) -#define TIMER_IRQSTAT_TIMER_IR_EN(x) (1 << ((x) + 8)) -#define TIMER_IRQSTAT_TIMER0_IR_EN (1 << 8) -#define TIMER_IRQSTAT_TIMER1_IR_EN (1 << 9) -#define TIMER_IRQSTAT_TIMER2_IR_EN (1 << 10) - -/* Timer control register */ -#define TIMER_CTLx_REG(x) (0x4 + (x * 4)) -#define TIMER_CTL0_REG 0x4 -#define TIMER_CTL1_REG 0x8 -#define TIMER_CTL2_REG 0xC -#define TIMER_CTL_COUNTDOWN_MASK (0x3fffffff) -#define TIMER_CTL_MONOTONIC_MASK (1 << 30) -#define TIMER_CTL_ENABLE_MASK (1 << 31) - - -/************************************************************************* - * _REG relative to RSET_WDT - *************************************************************************/ - -/* Watchdog default count register */ -#define WDT_DEFVAL_REG 0x0 - -/* Watchdog control register */ -#define WDT_CTL_REG 0x4 - -/* Watchdog control register constants */ -#define WDT_START_1 (0xff00) -#define WDT_START_2 (0x00ff) -#define WDT_STOP_1 (0xee00) -#define WDT_STOP_2 (0x00ee) - -/* Watchdog reset length register */ -#define WDT_RSTLEN_REG 0x8 - - -/************************************************************************* - * _REG relative to RSET_UARTx - *************************************************************************/ - -/* UART Control Register */ -#define UART_CTL_REG 0x0 -#define UART_CTL_RXTMOUTCNT_SHIFT 0 -#define UART_CTL_RXTMOUTCNT_MASK (0x1f << UART_CTL_RXTMOUTCNT_SHIFT) -#define UART_CTL_RSTTXDN_SHIFT 5 -#define UART_CTL_RSTTXDN_MASK (1 << UART_CTL_RSTTXDN_SHIFT) -#define UART_CTL_RSTRXFIFO_SHIFT 6 -#define UART_CTL_RSTRXFIFO_MASK (1 << UART_CTL_RSTRXFIFO_SHIFT) -#define UART_CTL_RSTTXFIFO_SHIFT 7 -#define UART_CTL_RSTTXFIFO_MASK (1 << UART_CTL_RSTTXFIFO_SHIFT) -#define UART_CTL_STOPBITS_SHIFT 8 -#define UART_CTL_STOPBITS_MASK (0xf << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_STOPBITS_1 (0x7 << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_STOPBITS_2 (0xf << UART_CTL_STOPBITS_SHIFT) -#define UART_CTL_BITSPERSYM_SHIFT 12 -#define UART_CTL_BITSPERSYM_MASK (0x3 << UART_CTL_BITSPERSYM_SHIFT) -#define UART_CTL_XMITBRK_SHIFT 14 -#define UART_CTL_XMITBRK_MASK (1 << UART_CTL_XMITBRK_SHIFT) -#define UART_CTL_RSVD_SHIFT 15 -#define UART_CTL_RSVD_MASK (1 << UART_CTL_RSVD_SHIFT) -#define UART_CTL_RXPAREVEN_SHIFT 16 -#define UART_CTL_RXPAREVEN_MASK (1 << UART_CTL_RXPAREVEN_SHIFT) -#define UART_CTL_RXPAREN_SHIFT 17 -#define UART_CTL_RXPAREN_MASK (1 << UART_CTL_RXPAREN_SHIFT) -#define UART_CTL_TXPAREVEN_SHIFT 18 -#define UART_CTL_TXPAREVEN_MASK (1 << UART_CTL_TXPAREVEN_SHIFT) -#define UART_CTL_TXPAREN_SHIFT 18 -#define UART_CTL_TXPAREN_MASK (1 << UART_CTL_TXPAREN_SHIFT) -#define UART_CTL_LOOPBACK_SHIFT 20 -#define UART_CTL_LOOPBACK_MASK (1 << UART_CTL_LOOPBACK_SHIFT) -#define UART_CTL_RXEN_SHIFT 21 -#define UART_CTL_RXEN_MASK (1 << UART_CTL_RXEN_SHIFT) -#define UART_CTL_TXEN_SHIFT 22 -#define UART_CTL_TXEN_MASK (1 << UART_CTL_TXEN_SHIFT) -#define UART_CTL_BRGEN_SHIFT 23 -#define UART_CTL_BRGEN_MASK (1 << UART_CTL_BRGEN_SHIFT) - -/* UART Baudword register */ -#define UART_BAUD_REG 0x4 - -/* UART Misc Control register */ -#define UART_MCTL_REG 0x8 -#define UART_MCTL_DTR_SHIFT 0 -#define UART_MCTL_DTR_MASK (1 << UART_MCTL_DTR_SHIFT) -#define UART_MCTL_RTS_SHIFT 1 -#define UART_MCTL_RTS_MASK (1 << UART_MCTL_RTS_SHIFT) -#define UART_MCTL_RXFIFOTHRESH_SHIFT 8 -#define UART_MCTL_RXFIFOTHRESH_MASK (0xf << UART_MCTL_RXFIFOTHRESH_SHIFT) -#define UART_MCTL_TXFIFOTHRESH_SHIFT 12 -#define UART_MCTL_TXFIFOTHRESH_MASK (0xf << UART_MCTL_TXFIFOTHRESH_SHIFT) -#define UART_MCTL_RXFIFOFILL_SHIFT 16 -#define UART_MCTL_RXFIFOFILL_MASK (0x1f << UART_MCTL_RXFIFOFILL_SHIFT) -#define UART_MCTL_TXFIFOFILL_SHIFT 24 -#define UART_MCTL_TXFIFOFILL_MASK (0x1f << UART_MCTL_TXFIFOFILL_SHIFT) - -/* UART External Input Configuration register */ -#define UART_EXTINP_REG 0xc -#define UART_EXTINP_RI_SHIFT 0 -#define UART_EXTINP_RI_MASK (1 << UART_EXTINP_RI_SHIFT) -#define UART_EXTINP_CTS_SHIFT 1 -#define UART_EXTINP_CTS_MASK (1 << UART_EXTINP_CTS_SHIFT) -#define UART_EXTINP_DCD_SHIFT 2 -#define UART_EXTINP_DCD_MASK (1 << UART_EXTINP_DCD_SHIFT) -#define UART_EXTINP_DSR_SHIFT 3 -#define UART_EXTINP_DSR_MASK (1 << UART_EXTINP_DSR_SHIFT) -#define UART_EXTINP_IRSTAT(x) (1 << (x + 4)) -#define UART_EXTINP_IRMASK(x) (1 << (x + 8)) -#define UART_EXTINP_IR_RI 0 -#define UART_EXTINP_IR_CTS 1 -#define UART_EXTINP_IR_DCD 2 -#define UART_EXTINP_IR_DSR 3 -#define UART_EXTINP_RI_NOSENSE_SHIFT 16 -#define UART_EXTINP_RI_NOSENSE_MASK (1 << UART_EXTINP_RI_NOSENSE_SHIFT) -#define UART_EXTINP_CTS_NOSENSE_SHIFT 17 -#define UART_EXTINP_CTS_NOSENSE_MASK (1 << UART_EXTINP_CTS_NOSENSE_SHIFT) -#define UART_EXTINP_DCD_NOSENSE_SHIFT 18 -#define UART_EXTINP_DCD_NOSENSE_MASK (1 << UART_EXTINP_DCD_NOSENSE_SHIFT) -#define UART_EXTINP_DSR_NOSENSE_SHIFT 19 -#define UART_EXTINP_DSR_NOSENSE_MASK (1 << UART_EXTINP_DSR_NOSENSE_SHIFT) - -/* UART Interrupt register */ -#define UART_IR_REG 0x10 -#define UART_IR_MASK(x) (1 << (x + 16)) -#define UART_IR_STAT(x) (1 << (x)) -#define UART_IR_EXTIP 0 -#define UART_IR_TXUNDER 1 -#define UART_IR_TXOVER 2 -#define UART_IR_TXTRESH 3 -#define UART_IR_TXRDLATCH 4 -#define UART_IR_TXEMPTY 5 -#define UART_IR_RXUNDER 6 -#define UART_IR_RXOVER 7 -#define UART_IR_RXTIMEOUT 8 -#define UART_IR_RXFULL 9 -#define UART_IR_RXTHRESH 10 -#define UART_IR_RXNOTEMPTY 11 -#define UART_IR_RXFRAMEERR 12 -#define UART_IR_RXPARERR 13 -#define UART_IR_RXBRK 14 -#define UART_IR_TXDONE 15 - -/* UART Fifo register */ -#define UART_FIFO_REG 0x14 -#define UART_FIFO_VALID_SHIFT 0 -#define UART_FIFO_VALID_MASK 0xff -#define UART_FIFO_FRAMEERR_SHIFT 8 -#define UART_FIFO_FRAMEERR_MASK (1 << UART_FIFO_FRAMEERR_SHIFT) -#define UART_FIFO_PARERR_SHIFT 9 -#define UART_FIFO_PARERR_MASK (1 << UART_FIFO_PARERR_SHIFT) -#define UART_FIFO_BRKDET_SHIFT 10 -#define UART_FIFO_BRKDET_MASK (1 << UART_FIFO_BRKDET_SHIFT) -#define UART_FIFO_ANYERR_MASK (UART_FIFO_FRAMEERR_MASK | \ - UART_FIFO_PARERR_MASK | \ - UART_FIFO_BRKDET_MASK) - - -/************************************************************************* - * _REG relative to RSET_GPIO - *************************************************************************/ - -/* GPIO registers */ -#define GPIO_CTL_HI_REG 0x0 -#define GPIO_CTL_LO_REG 0x4 -#define GPIO_DATA_HI_REG 0x8 -#define GPIO_DATA_LO_REG 0xC - -/* GPIO mux registers and constants */ -#define GPIO_MODE_REG 0x18 - -#define GPIO_MODE_6348_G4_DIAG 0x00090000 -#define GPIO_MODE_6348_G4_UTOPIA 0x00080000 -#define GPIO_MODE_6348_G4_LEGACY_LED 0x00030000 -#define GPIO_MODE_6348_G4_MII_SNOOP 0x00020000 -#define GPIO_MODE_6348_G4_EXT_EPHY 0x00010000 -#define GPIO_MODE_6348_G3_DIAG 0x00009000 -#define GPIO_MODE_6348_G3_UTOPIA 0x00008000 -#define GPIO_MODE_6348_G3_EXT_MII 0x00007000 -#define GPIO_MODE_6348_G2_DIAG 0x00000900 -#define GPIO_MODE_6348_G2_PCI 0x00000500 -#define GPIO_MODE_6348_G1_DIAG 0x00000090 -#define GPIO_MODE_6348_G1_UTOPIA 0x00000080 -#define GPIO_MODE_6348_G1_SPI_UART 0x00000060 -#define GPIO_MODE_6348_G1_SPI_MASTER 0x00000060 -#define GPIO_MODE_6348_G1_MII_PCCARD 0x00000040 -#define GPIO_MODE_6348_G1_MII_SNOOP 0x00000020 -#define GPIO_MODE_6348_G1_EXT_EPHY 0x00000010 -#define GPIO_MODE_6348_G0_DIAG 0x00000009 -#define GPIO_MODE_6348_G0_EXT_MII 0x00000007 - -#define GPIO_MODE_6358_EXTRACS (1 << 5) -#define GPIO_MODE_6358_UART1 (1 << 6) -#define GPIO_MODE_6358_EXTRA_SPI_SS (1 << 7) -#define GPIO_MODE_6358_SERIAL_LED (1 << 10) -#define GPIO_MODE_6358_UTOPIA (1 << 12) - - -/************************************************************************* - * _REG relative to RSET_ENET - *************************************************************************/ - -/* Receiver Configuration register */ -#define ENET_RXCFG_REG 0x0 -#define ENET_RXCFG_ALLMCAST_SHIFT 1 -#define ENET_RXCFG_ALLMCAST_MASK (1 << ENET_RXCFG_ALLMCAST_SHIFT) -#define ENET_RXCFG_PROMISC_SHIFT 3 -#define ENET_RXCFG_PROMISC_MASK (1 << ENET_RXCFG_PROMISC_SHIFT) -#define ENET_RXCFG_LOOPBACK_SHIFT 4 -#define ENET_RXCFG_LOOPBACK_MASK (1 << ENET_RXCFG_LOOPBACK_SHIFT) -#define ENET_RXCFG_ENFLOW_SHIFT 5 -#define ENET_RXCFG_ENFLOW_MASK (1 << ENET_RXCFG_ENFLOW_SHIFT) - -/* Receive Maximum Length register */ -#define ENET_RXMAXLEN_REG 0x4 -#define ENET_RXMAXLEN_SHIFT 0 -#define ENET_RXMAXLEN_MASK (0x7ff << ENET_RXMAXLEN_SHIFT) - -/* Transmit Maximum Length register */ -#define ENET_TXMAXLEN_REG 0x8 -#define ENET_TXMAXLEN_SHIFT 0 -#define ENET_TXMAXLEN_MASK (0x7ff << ENET_TXMAXLEN_SHIFT) - -/* MII Status/Control register */ -#define ENET_MIISC_REG 0x10 -#define ENET_MIISC_MDCFREQDIV_SHIFT 0 -#define ENET_MIISC_MDCFREQDIV_MASK (0x7f << ENET_MIISC_MDCFREQDIV_SHIFT) -#define ENET_MIISC_PREAMBLEEN_SHIFT 7 -#define ENET_MIISC_PREAMBLEEN_MASK (1 << ENET_MIISC_PREAMBLEEN_SHIFT) - -/* MII Data register */ -#define ENET_MIIDATA_REG 0x14 -#define ENET_MIIDATA_DATA_SHIFT 0 -#define ENET_MIIDATA_DATA_MASK (0xffff << ENET_MIIDATA_DATA_SHIFT) -#define ENET_MIIDATA_TA_SHIFT 16 -#define ENET_MIIDATA_TA_MASK (0x3 << ENET_MIIDATA_TA_SHIFT) -#define ENET_MIIDATA_REG_SHIFT 18 -#define ENET_MIIDATA_REG_MASK (0x1f << ENET_MIIDATA_REG_SHIFT) -#define ENET_MIIDATA_PHYID_SHIFT 23 -#define ENET_MIIDATA_PHYID_MASK (0x1f << ENET_MIIDATA_PHYID_SHIFT) -#define ENET_MIIDATA_OP_READ_MASK (0x6 << 28) -#define ENET_MIIDATA_OP_WRITE_MASK (0x5 << 28) - -/* Ethernet Interrupt Mask register */ -#define ENET_IRMASK_REG 0x18 - -/* Ethernet Interrupt register */ -#define ENET_IR_REG 0x1c -#define ENET_IR_MII (1 << 0) -#define ENET_IR_MIB (1 << 1) -#define ENET_IR_FLOWC (1 << 2) - -/* Ethernet Control register */ -#define ENET_CTL_REG 0x2c -#define ENET_CTL_ENABLE_SHIFT 0 -#define ENET_CTL_ENABLE_MASK (1 << ENET_CTL_ENABLE_SHIFT) -#define ENET_CTL_DISABLE_SHIFT 1 -#define ENET_CTL_DISABLE_MASK (1 << ENET_CTL_DISABLE_SHIFT) -#define ENET_CTL_SRESET_SHIFT 2 -#define ENET_CTL_SRESET_MASK (1 << ENET_CTL_SRESET_SHIFT) -#define ENET_CTL_EPHYSEL_SHIFT 3 -#define ENET_CTL_EPHYSEL_MASK (1 << ENET_CTL_EPHYSEL_SHIFT) - -/* Transmit Control register */ -#define ENET_TXCTL_REG 0x30 -#define ENET_TXCTL_FD_SHIFT 0 -#define ENET_TXCTL_FD_MASK (1 << ENET_TXCTL_FD_SHIFT) - -/* Transmit Watermask register */ -#define ENET_TXWMARK_REG 0x34 -#define ENET_TXWMARK_WM_SHIFT 0 -#define ENET_TXWMARK_WM_MASK (0x3f << ENET_TXWMARK_WM_SHIFT) - -/* MIB Control register */ -#define ENET_MIBCTL_REG 0x38 -#define ENET_MIBCTL_RDCLEAR_SHIFT 0 -#define ENET_MIBCTL_RDCLEAR_MASK (1 << ENET_MIBCTL_RDCLEAR_SHIFT) - -/* Perfect Match Data Low register */ -#define ENET_PML_REG(x) (0x58 + (x) * 8) -#define ENET_PMH_REG(x) (0x5c + (x) * 8) -#define ENET_PMH_DATAVALID_SHIFT 16 -#define ENET_PMH_DATAVALID_MASK (1 << ENET_PMH_DATAVALID_SHIFT) - -/* MIB register */ -#define ENET_MIB_REG(x) (0x200 + (x) * 4) -#define ENET_MIB_REG_COUNT 55 - - -/************************************************************************* - * _REG relative to RSET_ENETDMA - *************************************************************************/ - -/* Controller Configuration Register */ -#define ENETDMA_CFG_REG (0x0) -#define ENETDMA_CFG_EN_SHIFT 0 -#define ENETDMA_CFG_EN_MASK (1 << ENETDMA_CFG_EN_SHIFT) -#define ENETDMA_CFG_FLOWCH_MASK(x) (1 << ((x >> 1) + 1)) - -/* Flow Control Descriptor Low Threshold register */ -#define ENETDMA_FLOWCL_REG(x) (0x4 + (x) * 6) - -/* Flow Control Descriptor High Threshold register */ -#define ENETDMA_FLOWCH_REG(x) (0x8 + (x) * 6) - -/* Flow Control Descriptor Buffer Alloca Threshold register */ -#define ENETDMA_BUFALLOC_REG(x) (0xc + (x) * 6) -#define ENETDMA_BUFALLOC_FORCE_SHIFT 31 -#define ENETDMA_BUFALLOC_FORCE_MASK (1 << ENETDMA_BUFALLOC_FORCE_SHIFT) - -/* Channel Configuration register */ -#define ENETDMA_CHANCFG_REG(x) (0x100 + (x) * 0x10) -#define ENETDMA_CHANCFG_EN_SHIFT 0 -#define ENETDMA_CHANCFG_EN_MASK (1 << ENETDMA_CHANCFG_EN_SHIFT) -#define ENETDMA_CHANCFG_PKTHALT_SHIFT 1 -#define ENETDMA_CHANCFG_PKTHALT_MASK (1 << ENETDMA_CHANCFG_PKTHALT_SHIFT) - -/* Interrupt Control/Status register */ -#define ENETDMA_IR_REG(x) (0x104 + (x) * 0x10) -#define ENETDMA_IR_BUFDONE_MASK (1 << 0) -#define ENETDMA_IR_PKTDONE_MASK (1 << 1) -#define ENETDMA_IR_NOTOWNER_MASK (1 << 2) - -/* Interrupt Mask register */ -#define ENETDMA_IRMASK_REG(x) (0x108 + (x) * 0x10) - -/* Maximum Burst Length */ -#define ENETDMA_MAXBURST_REG(x) (0x10C + (x) * 0x10) - -/* Ring Start Address register */ -#define ENETDMA_RSTART_REG(x) (0x200 + (x) * 0x10) - -/* State Ram Word 2 */ -#define ENETDMA_SRAM2_REG(x) (0x204 + (x) * 0x10) - -/* State Ram Word 3 */ -#define ENETDMA_SRAM3_REG(x) (0x208 + (x) * 0x10) - -/* State Ram Word 4 */ -#define ENETDMA_SRAM4_REG(x) (0x20c + (x) * 0x10) - - -/************************************************************************* - * _REG relative to RSET_OHCI_PRIV - *************************************************************************/ - -#define OHCI_PRIV_REG 0x0 -#define OHCI_PRIV_PORT1_HOST_SHIFT 0 -#define OHCI_PRIV_PORT1_HOST_MASK (1 << OHCI_PRIV_PORT1_HOST_SHIFT) -#define OHCI_PRIV_REG_SWAP_SHIFT 3 -#define OHCI_PRIV_REG_SWAP_MASK (1 << OHCI_PRIV_REG_SWAP_SHIFT) - - -/************************************************************************* - * _REG relative to RSET_USBH_PRIV - *************************************************************************/ - -#define USBH_PRIV_SWAP_REG 0x0 -#define USBH_PRIV_SWAP_EHCI_ENDN_SHIFT 4 -#define USBH_PRIV_SWAP_EHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_EHCI_ENDN_SHIFT) -#define USBH_PRIV_SWAP_EHCI_DATA_SHIFT 3 -#define USBH_PRIV_SWAP_EHCI_DATA_MASK (1 << USBH_PRIV_SWAP_EHCI_DATA_SHIFT) -#define USBH_PRIV_SWAP_OHCI_ENDN_SHIFT 1 -#define USBH_PRIV_SWAP_OHCI_ENDN_MASK (1 << USBH_PRIV_SWAP_OHCI_ENDN_SHIFT) -#define USBH_PRIV_SWAP_OHCI_DATA_SHIFT 0 -#define USBH_PRIV_SWAP_OHCI_DATA_MASK (1 << USBH_PRIV_SWAP_OHCI_DATA_SHIFT) - -#define USBH_PRIV_TEST_REG 0x24 - - -/************************************************************************* - * _REG relative to RSET_MPI - *************************************************************************/ - -/* well known (hard wired) chip select */ -#define MPI_CS_PCMCIA_COMMON 4 -#define MPI_CS_PCMCIA_ATTR 5 -#define MPI_CS_PCMCIA_IO 6 - -/* Chip select base register */ -#define MPI_CSBASE_REG(x) (0x0 + (x) * 8) -#define MPI_CSBASE_BASE_SHIFT 13 -#define MPI_CSBASE_BASE_MASK (0x1ffff << MPI_CSBASE_BASE_SHIFT) -#define MPI_CSBASE_SIZE_SHIFT 0 -#define MPI_CSBASE_SIZE_MASK (0xf << MPI_CSBASE_SIZE_SHIFT) - -#define MPI_CSBASE_SIZE_8K 0 -#define MPI_CSBASE_SIZE_16K 1 -#define MPI_CSBASE_SIZE_32K 2 -#define MPI_CSBASE_SIZE_64K 3 -#define MPI_CSBASE_SIZE_128K 4 -#define MPI_CSBASE_SIZE_256K 5 -#define MPI_CSBASE_SIZE_512K 6 -#define MPI_CSBASE_SIZE_1M 7 -#define MPI_CSBASE_SIZE_2M 8 -#define MPI_CSBASE_SIZE_4M 9 -#define MPI_CSBASE_SIZE_8M 10 -#define MPI_CSBASE_SIZE_16M 11 -#define MPI_CSBASE_SIZE_32M 12 -#define MPI_CSBASE_SIZE_64M 13 -#define MPI_CSBASE_SIZE_128M 14 -#define MPI_CSBASE_SIZE_256M 15 - -/* Chip select control register */ -#define MPI_CSCTL_REG(x) (0x4 + (x) * 8) -#define MPI_CSCTL_ENABLE_MASK (1 << 0) -#define MPI_CSCTL_WAIT_SHIFT 1 -#define MPI_CSCTL_WAIT_MASK (0x7 << MPI_CSCTL_WAIT_SHIFT) -#define MPI_CSCTL_DATA16_MASK (1 << 4) -#define MPI_CSCTL_SYNCMODE_MASK (1 << 7) -#define MPI_CSCTL_TSIZE_MASK (1 << 8) -#define MPI_CSCTL_ENDIANSWAP_MASK (1 << 10) -#define MPI_CSCTL_SETUP_SHIFT 16 -#define MPI_CSCTL_SETUP_MASK (0xf << MPI_CSCTL_SETUP_SHIFT) -#define MPI_CSCTL_HOLD_SHIFT 20 -#define MPI_CSCTL_HOLD_MASK (0xf << MPI_CSCTL_HOLD_SHIFT) - -/* PCI registers */ -#define MPI_SP0_RANGE_REG 0x100 -#define MPI_SP0_REMAP_REG 0x104 -#define MPI_SP0_REMAP_ENABLE_MASK (1 << 0) -#define MPI_SP1_RANGE_REG 0x10C -#define MPI_SP1_REMAP_REG 0x110 -#define MPI_SP1_REMAP_ENABLE_MASK (1 << 0) - -#define MPI_L2PCFG_REG 0x11C -#define MPI_L2PCFG_CFG_TYPE_SHIFT 0 -#define MPI_L2PCFG_CFG_TYPE_MASK (0x3 << MPI_L2PCFG_CFG_TYPE_SHIFT) -#define MPI_L2PCFG_REG_SHIFT 2 -#define MPI_L2PCFG_REG_MASK (0x3f << MPI_L2PCFG_REG_SHIFT) -#define MPI_L2PCFG_FUNC_SHIFT 8 -#define MPI_L2PCFG_FUNC_MASK (0x7 << MPI_L2PCFG_FUNC_SHIFT) -#define MPI_L2PCFG_DEVNUM_SHIFT 11 -#define MPI_L2PCFG_DEVNUM_MASK (0x1f << MPI_L2PCFG_DEVNUM_SHIFT) -#define MPI_L2PCFG_CFG_USEREG_MASK (1 << 30) -#define MPI_L2PCFG_CFG_SEL_MASK (1 << 31) - -#define MPI_L2PMEMRANGE1_REG 0x120 -#define MPI_L2PMEMBASE1_REG 0x124 -#define MPI_L2PMEMREMAP1_REG 0x128 -#define MPI_L2PMEMRANGE2_REG 0x12C -#define MPI_L2PMEMBASE2_REG 0x130 -#define MPI_L2PMEMREMAP2_REG 0x134 -#define MPI_L2PIORANGE_REG 0x138 -#define MPI_L2PIOBASE_REG 0x13C -#define MPI_L2PIOREMAP_REG 0x140 -#define MPI_L2P_BASE_MASK (0xffff8000) -#define MPI_L2PREMAP_ENABLED_MASK (1 << 0) -#define MPI_L2PREMAP_IS_CARDBUS_MASK (1 << 2) - -#define MPI_PCIMODESEL_REG 0x144 -#define MPI_PCIMODESEL_BAR1_NOSWAP_MASK (1 << 0) -#define MPI_PCIMODESEL_BAR2_NOSWAP_MASK (1 << 1) -#define MPI_PCIMODESEL_EXT_ARB_MASK (1 << 2) -#define MPI_PCIMODESEL_PREFETCH_SHIFT 4 -#define MPI_PCIMODESEL_PREFETCH_MASK (0xf << MPI_PCIMODESEL_PREFETCH_SHIFT) - -#define MPI_LOCBUSCTL_REG 0x14C -#define MPI_LOCBUSCTL_EN_PCI_GPIO_MASK (1 << 0) -#define MPI_LOCBUSCTL_U2P_NOSWAP_MASK (1 << 1) - -#define MPI_LOCINT_REG 0x150 -#define MPI_LOCINT_MASK(x) (1 << (x + 16)) -#define MPI_LOCINT_STAT(x) (1 << (x)) -#define MPI_LOCINT_DIR_FAILED 6 -#define MPI_LOCINT_EXT_PCI_INT 7 -#define MPI_LOCINT_SERR 8 -#define MPI_LOCINT_CSERR 9 - -#define MPI_PCICFGCTL_REG 0x178 -#define MPI_PCICFGCTL_CFGADDR_SHIFT 2 -#define MPI_PCICFGCTL_CFGADDR_MASK (0x1f << MPI_PCICFGCTL_CFGADDR_SHIFT) -#define MPI_PCICFGCTL_WRITEEN_MASK (1 << 7) - -#define MPI_PCICFGDATA_REG 0x17C - -/* PCI host bridge custom register */ -#define BCMPCI_REG_TIMERS 0x40 -#define REG_TIMER_TRDY_SHIFT 0 -#define REG_TIMER_TRDY_MASK (0xff << REG_TIMER_TRDY_SHIFT) -#define REG_TIMER_RETRY_SHIFT 8 -#define REG_TIMER_RETRY_MASK (0xff << REG_TIMER_RETRY_SHIFT) - - -/************************************************************************* - * _REG relative to RSET_PCMCIA - *************************************************************************/ - -#define PCMCIA_C1_REG 0x0 -#define PCMCIA_C1_CD1_MASK (1 << 0) -#define PCMCIA_C1_CD2_MASK (1 << 1) -#define PCMCIA_C1_VS1_MASK (1 << 2) -#define PCMCIA_C1_VS2_MASK (1 << 3) -#define PCMCIA_C1_VS1OE_MASK (1 << 6) -#define PCMCIA_C1_VS2OE_MASK (1 << 7) -#define PCMCIA_C1_CBIDSEL_SHIFT (8) -#define PCMCIA_C1_CBIDSEL_MASK (0x1f << PCMCIA_C1_CBIDSEL_SHIFT) -#define PCMCIA_C1_EN_PCMCIA_GPIO_MASK (1 << 13) -#define PCMCIA_C1_EN_PCMCIA_MASK (1 << 14) -#define PCMCIA_C1_EN_CARDBUS_MASK (1 << 15) -#define PCMCIA_C1_RESET_MASK (1 << 18) - -#define PCMCIA_C2_REG 0x8 -#define PCMCIA_C2_DATA16_MASK (1 << 0) -#define PCMCIA_C2_BYTESWAP_MASK (1 << 1) -#define PCMCIA_C2_RWCOUNT_SHIFT 2 -#define PCMCIA_C2_RWCOUNT_MASK (0x3f << PCMCIA_C2_RWCOUNT_SHIFT) -#define PCMCIA_C2_INACTIVE_SHIFT 8 -#define PCMCIA_C2_INACTIVE_MASK (0x3f << PCMCIA_C2_INACTIVE_SHIFT) -#define PCMCIA_C2_SETUP_SHIFT 16 -#define PCMCIA_C2_SETUP_MASK (0x3f << PCMCIA_C2_SETUP_SHIFT) -#define PCMCIA_C2_HOLD_SHIFT 24 -#define PCMCIA_C2_HOLD_MASK (0x3f << PCMCIA_C2_HOLD_SHIFT) - - -/************************************************************************* - * _REG relative to RSET_SDRAM - *************************************************************************/ - -#define SDRAM_CFG_REG 0x0 -#define SDRAM_CFG_ROW_SHIFT 4 -#define SDRAM_CFG_ROW_MASK (0x3 << SDRAM_CFG_ROW_SHIFT) -#define SDRAM_CFG_COL_SHIFT 6 -#define SDRAM_CFG_COL_MASK (0x3 << SDRAM_CFG_COL_SHIFT) -#define SDRAM_CFG_32B_SHIFT 10 -#define SDRAM_CFG_32B_MASK (1 << SDRAM_CFG_32B_SHIFT) -#define SDRAM_CFG_BANK_SHIFT 13 -#define SDRAM_CFG_BANK_MASK (1 << SDRAM_CFG_BANK_SHIFT) - -#define SDRAM_MEM_REG 0xc - -#define SDRAM_PRIO_REG 0x2C -#define SDRAM_PRIO_MIPS_SHIFT 29 -#define SDRAM_PRIO_MIPS_MASK (1 << SDRAM_PRIO_MIPS_SHIFT) -#define SDRAM_PRIO_ADSL_SHIFT 30 -#define SDRAM_PRIO_ADSL_MASK (1 << SDRAM_PRIO_ADSL_SHIFT) -#define SDRAM_PRIO_EN_SHIFT 31 -#define SDRAM_PRIO_EN_MASK (1 << SDRAM_PRIO_EN_SHIFT) - - -/************************************************************************* - * _REG relative to RSET_MEMC - *************************************************************************/ - -#define MEMC_CFG_REG 0x4 -#define MEMC_CFG_32B_SHIFT 1 -#define MEMC_CFG_32B_MASK (1 << MEMC_CFG_32B_SHIFT) -#define MEMC_CFG_COL_SHIFT 3 -#define MEMC_CFG_COL_MASK (0x3 << MEMC_CFG_COL_SHIFT) -#define MEMC_CFG_ROW_SHIFT 6 -#define MEMC_CFG_ROW_MASK (0x3 << MEMC_CFG_ROW_SHIFT) - - -/************************************************************************* - * _REG relative to RSET_DDR - *************************************************************************/ - -#define DDR_DMIPSPLLCFG_REG 0x18 -#define DMIPSPLLCFG_M1_SHIFT 0 -#define DMIPSPLLCFG_M1_MASK (0xff << DMIPSPLLCFG_M1_SHIFT) -#define DMIPSPLLCFG_N1_SHIFT 23 -#define DMIPSPLLCFG_N1_MASK (0x3f << DMIPSPLLCFG_N1_SHIFT) -#define DMIPSPLLCFG_N2_SHIFT 29 -#define DMIPSPLLCFG_N2_MASK (0x7 << DMIPSPLLCFG_N2_SHIFT) - -/************************************************************************* - * _REG relative to RSET_SPI - *************************************************************************/ - -/* BCM 6338 SPI core */ -#define SPI_BCM_6338_SPI_CMD 0x00 /* 16-bits register */ -#define SPI_BCM_6338_SPI_INT_STATUS 0x02 -#define SPI_BCM_6338_SPI_MASK_INT_ST 0x03 -#define SPI_BCM_6338_SPI_INT_MASK 0x04 -#define SPI_BCM_6338_SPI_ST 0x05 -#define SPI_BCM_6338_SPI_CLK_CFG 0x06 -#define SPI_BCM_6338_SPI_FILL_BYTE 0x07 -#define SPI_BCM_6338_SPI_MSG_TAIL 0x09 -#define SPI_BCM_6338_SPI_RX_TAIL 0x0b -#define SPI_BCM_6338_SPI_MSG_CTL 0x40 -#define SPI_BCM_6338_SPI_MSG_DATA 0x41 -#define SPI_BCM_6338_SPI_MSG_DATA_SIZE 0x3f -#define SPI_BCM_6338_SPI_RX_DATA 0x80 -#define SPI_BCM_6338_SPI_RX_DATA_SIZE 0x3f - -/* BCM 6348 SPI core */ -#define SPI_BCM_6348_SPI_MASK_INT_ST 0x00 -#define SPI_BCM_6348_SPI_INT_STATUS 0x01 -#define SPI_BCM_6348_SPI_CMD 0x02 /* 16-bits register */ -#define SPI_BCM_6348_SPI_FILL_BYTE 0x04 -#define SPI_BCM_6348_SPI_CLK_CFG 0x05 -#define SPI_BCM_6348_SPI_ST 0x06 -#define SPI_BCM_6348_SPI_INT_MASK 0x07 -#define SPI_BCM_6348_SPI_RX_TAIL 0x08 -#define SPI_BCM_6348_SPI_MSG_TAIL 0x10 -#define SPI_BCM_6348_SPI_MSG_DATA 0x40 -#define SPI_BCM_6348_SPI_MSG_CTL 0x42 -#define SPI_BCM_6348_SPI_MSG_DATA_SIZE 0x3f -#define SPI_BCM_6348_SPI_RX_DATA 0x80 -#define SPI_BCM_6348_SPI_RX_DATA_SIZE 0x3f - -/* BCM 6358 SPI core */ -#define SPI_BCM_6358_MSG_CTL 0x00 /* 16-bits register */ - -#define SPI_BCM_6358_SPI_MSG_DATA 0x02 -#define SPI_BCM_6358_SPI_MSG_DATA_SIZE 0x21e - -#define SPI_BCM_6358_SPI_RX_DATA 0x400 -#define SPI_BCM_6358_SPI_RX_DATA_SIZE 0x220 - -#define SPI_BCM_6358_SPI_CMD 0x700 /* 16-bits register */ - -#define SPI_BCM_6358_SPI_INT_STATUS 0x702 -#define SPI_BCM_6358_SPI_MASK_INT_ST 0x703 - -#define SPI_BCM_6358_SPI_INT_MASK 0x704 - -#define SPI_BCM_6358_SPI_STATUS 0x705 - -#define SPI_BCM_6358_SPI_CLK_CFG 0x706 - -#define SPI_BCM_6358_SPI_FILL_BYTE 0x707 -#define SPI_BCM_6358_SPI_MSG_TAIL 0x709 -#define SPI_BCM_6358_SPI_RX_TAIL 0x70B - -/* Shared SPI definitions */ - -/* Message configuration */ -#define SPI_FD_RW 0x00 -#define SPI_HD_W 0x01 -#define SPI_HD_R 0x02 -#define SPI_BYTE_CNT_SHIFT 0 -#define SPI_MSG_TYPE_SHIFT 14 - -/* Command */ -#define SPI_CMD_NOOP 0x01 -#define SPI_CMD_SOFT_RESET 0x02 -#define SPI_CMD_HARD_RESET 0x04 -#define SPI_CMD_START_IMMEDIATE 0x08 -#define SPI_CMD_COMMAND_SHIFT 0 -#define SPI_CMD_COMMAND_MASK 0x000f -#define SPI_CMD_DEVICE_ID_SHIFT 4 -#define SPI_CMD_PREPEND_BYTE_CNT_SHIFT 8 -#define SPI_CMD_ONE_BYTE_SHIFT 11 -#define SPI_CMD_ONE_WIRE_SHIFT 12 -#define SPI_DEV_ID_0 0 -#define SPI_DEV_ID_1 1 -#define SPI_DEV_ID_2 2 -#define SPI_DEV_ID_3 3 - -/* Interrupt mask */ -#define SPI_INTR_CMD_DONE 0x01 -#define SPI_INTR_RX_OVERFLOW 0x02 -#define SPI_INTR_TX_UNDERFLOW 0x04 -#define SPI_INTR_TX_OVERFLOW 0x08 -#define SPI_INTR_RX_UNDERFLOW 0x10 -#define SPI_INTR_CLEAR_ALL 0x1f - -/* Status */ -#define SPI_RX_EMPTY 0x02 -#define SPI_CMD_BUSY 0x04 -#define SPI_SERIAL_BUSY 0x08 - -/* Clock configuration */ -#define SPI_CLK_20MHZ 0x00 -#define SPI_CLK_0_391MHZ 0x01 -#define SPI_CLK_0_781MHZ 0x02 /* default */ -#define SPI_CLK_1_563MHZ 0x03 -#define SPI_CLK_3_125MHZ 0x04 -#define SPI_CLK_6_250MHZ 0x05 -#define SPI_CLK_12_50MHZ 0x06 -#define SPI_CLK_25MHZ 0x07 -#define SPI_CLK_MASK 0x07 -#define SPI_SSOFFTIME_MASK 0x38 -#define SPI_SSOFFTIME_SHIFT 3 -#define SPI_BYTE_SWAP 0x80 - - -#endif /* BCM63XX_REGS_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h deleted file mode 100644 index c0fce833c9..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm63xx_timer.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef BCM63XX_TIMER_H_ -#define BCM63XX_TIMER_H_ - -int bcm63xx_timer_register(int id, void (*callback)(void *data), void *data); -void bcm63xx_timer_unregister(int id); -int bcm63xx_timer_set(int id, int monotonic, unsigned int countdown_us); -int bcm63xx_timer_enable(int id); -int bcm63xx_timer_disable(int id); -unsigned int bcm63xx_timer_countdown(unsigned int countdown_us); - -#endif /* !BCM63XX_TIMER_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm_tag.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm_tag.h deleted file mode 100644 index c06f668942..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/bcm_tag.h +++ /dev/null @@ -1,178 +0,0 @@ -#ifndef __BCM63XX_TAG_H -#define __BCM63XX_TAG_H - -#define IMAGE_LEN 10 /* Length of Length Field */ -#define ADDRESS_LEN 12 /* Length of Address field */ -#define TAGID_LEN 6 /* Length of tag ID */ -#define TAGINFO_LEN 20 /* Length of vendor information field in tag */ -#define TAGVER_LEN 4 /* Length of Tag Version */ -#define TAGLAYOUT_LEN 4 /* Length of FlashLayoutVer */ - -#define NUM_TAGID 5 -#define IMAGETAG_CRC_START 0xFFFFFFFF - -struct tagiddesc_t { - char tagid[TAGID_LEN + 1]; - char tagiddesc[80]; -}; - - // bc221 is used by BT Voyager and should be right - // bc310 should be right, and may apply to 3.08 code as well -#define TAGID_DEFINITIONS { \ - { "bccfe", "Broadcom CFE flash image" }, \ - { "bc300", "Broadcom code version 3.00-3.06 and all ftp/tftp flash" }, \ - { "ag306", "Alice Gate (Pirelli, based on Broadcom 3.06)" }, \ - { "bc221", "Broadcom code version 2.21" }, \ - { "bc310", "Broadcom code version 3.10-3.12" }, \ -} - -struct bcm_tag_bccfe { - unsigned char tagVersion[TAGVER_LEN]; // 0-3: Version of the image tag - unsigned char sig_1[20]; // 4-23: Company Line 1 - unsigned char sig_2[14]; // 24-37: Company Line 2 - unsigned char chipid[6]; // 38-43: Chip this image is for - unsigned char boardid[16]; // 44-59: Board name - unsigned char big_endian[2]; // 60-61: Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; // 62-71: Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // 72-83: Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // 84-93: Size of CFE - unsigned char rootAddress[ADDRESS_LEN]; // 94-105: Address in memory of rootfs - unsigned char rootLength[IMAGE_LEN]; // 106-115: Size of rootfs - unsigned char kernelAddress[ADDRESS_LEN]; // 116-127: Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // 128-137: Size of kernel - unsigned char dualImage[2]; // 138-139: Unused at present - unsigned char inactiveFlag[2]; // 140-141: Unused at present - unsigned char information1[TAGINFO_LEN]; // 142-161: Unused at present - unsigned char tagId[TAGID_LEN]; // 162-167: Identifies which type of tag this is, currently two-letter company code, and then three digits for version of broadcom code in which this tag was first introduced - unsigned char tagIdCRC[4]; // 168-171: CRC32 of tagId - unsigned char reserved1[44]; // 172-215: Reserved area not in use - unsigned char imageCRC[4]; // 216-219: CRC32 of images - unsigned char reserved2[16]; // 220-235: Unused at present - unsigned char headerCRC[4]; // 236-239: CRC32 of header excluding tagVersion - unsigned char reserved3[16]; // 240-255: Unused at present -}; - -struct bcm_tag_bc300 { - unsigned char tagVersion[TAGVER_LEN]; // 0-3: Version of the image tag - unsigned char sig_1[20]; // 4-23: Company Line 1 - unsigned char sig_2[14]; // 24-37: Company Line 2 - unsigned char chipid[6]; // 38-43: Chip this image is for - unsigned char boardid[16]; // 44-59: Board name - unsigned char big_endian[2]; // 60-61: Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; // 62-71: Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // 72-83: Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // 84-93: Size of CFE - unsigned char flashImageStart[ADDRESS_LEN]; // 94-105: Address in memory of kernel (start of image) - unsigned char flashRootLength[IMAGE_LEN]; // 106-115: Size of rootfs + deadcode (web flash uses this + kernelLength to determine the size of the kernel+rootfs flash image) - unsigned char kernelAddress[ADDRESS_LEN]; // 116-127: Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // 128-137: Size of kernel - unsigned char dualImage[2]; // 138-139: Unused at present - unsigned char inactiveFlag[2]; // 140-141: Unused at present - unsigned char information1[TAGINFO_LEN]; // 142-161: Unused at present - unsigned char tagId[TAGID_LEN]; // 162-167: Identifies which type of tag this is, currently two-letter company code, and then three digits for version of broadcom code in which this tag was first introduced - unsigned char tagIdCRC[4]; // 168-173: CRC32 to ensure validity of tagId - unsigned char rootAddress[ADDRESS_LEN]; // 174-183: Address in memory of rootfs partition - unsigned char rootLength[IMAGE_LEN]; // 184-193: Size of rootfs partition - unsigned char reserved1[22]; // 194-215: Reserved area not in use - unsigned char imageCRC[4]; // 216-219: CRC32 of images - unsigned char reserved2[16]; // 220-235: Unused at present - unsigned char headerCRC[4]; // 236-239: CRC32 of header excluding tagVersion - unsigned char reserved3[16]; // 240-255: Unused at present -}; - -struct bcm_tag_ag306 { - unsigned char tagVersion[TAGVER_LEN]; // 0-3: Version of the image tag - unsigned char sig_1[20]; // 4-23: Company Line 1 - unsigned char sig_2[14]; // 24-37: Company Line 2 - unsigned char chipid[6]; // 38-43: Chip this image is for - unsigned char boardid[16]; // 44-59: Board name - unsigned char big_endian[2]; // 60-61: Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; // 62-71: Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // 72-83: Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // 84-93: Size of CFE - unsigned char flashImageStart[ADDRESS_LEN]; // 94-105: Address in memory of kernel (start of image) - unsigned char flashRootLength[IMAGE_LEN]; // 106-115: Size of rootfs + deadcode (web flash uses this + kernelLength to determine the size of the kernel+rootfs flash image) - unsigned char kernelAddress[ADDRESS_LEN]; // 116-127: Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // 128-137: Size of kernel - unsigned char dualImage[2]; // 138-139: Unused at present - unsigned char inactiveFlag[2]; // 140-141: Unused at present - unsigned char information1[TAGINFO_LEN]; // 142-161: Unused at present - unsigned char information2[54]; // 162-215: Compilation and related information (not generated/used by OpenWRT) - unsigned char kernelCRC[4] ; // 216-219: CRC32 of images - unsigned char rootAddress[ADDRESS_LEN]; // 220-231: Address in memory of rootfs partition - unsigned char tagIdCRC[4]; // 232-235: Checksum to ensure validity of tagId - unsigned char headerCRC[4]; // 236-239: CRC32 of header excluding tagVersion - unsigned char rootLength[IMAGE_LEN]; // 240-249: Size of rootfs - unsigned char tagId[TAGID_LEN]; // 250-255: Identifies which type of tag this is, currently two-letter company code, and then three digits for version of broadcom code in which this tag was first introduced -}; - -struct bcm_tag_bc221 { - unsigned char tagVersion[TAGVER_LEN]; // 0-3: Version of the image tag - unsigned char sig_1[20]; // 4-23: Company Line 1 - unsigned char sig_2[14]; // 24-37: Company Line 2 - unsigned char chipid[6]; // 38-43: Chip this image is for - unsigned char boardid[16]; // 44-59: Board name - unsigned char big_endian[2]; // 60-61: Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; // 62-71: Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // 72-83: Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // 84-93: Size of CFE - unsigned char flashImageStart[ADDRESS_LEN]; // 94-105: Address in memory of kernel (start of image) - unsigned char flashRootLength[IMAGE_LEN]; // 106-115: Size of rootfs + deadcode (web flash uses this + kernelLength to determine the size of the kernel+rootfs flash image) - unsigned char kernelAddress[ADDRESS_LEN]; // 116-127: Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // 128-137: Size of kernel - unsigned char dualImage[2]; // 138-139: Unused at present - unsigned char inactiveFlag[2]; // 140-141: Unused at present - unsigned char rsa_signature[TAGINFO_LEN]; // 142-161: RSA Signature (unused at present; some vendors may use this) - unsigned char reserved5[2]; // 162-163: Unused at present - unsigned char tagId[TAGID_LEN]; // 164-169: Identifies which type of tag this is, currently two-letter company code, and then three digits for version of broadcom code in which this tag was first introduced - unsigned char rootAddress[ADDRESS_LEN]; // 170-181: Address in memory of rootfs partition - unsigned char rootLength[IMAGE_LEN]; // 182-191: Size of rootfs partition - unsigned char flashLayoutVer[4]; // 192-195: Version flash layout - unsigned char fskernelCRC[4]; // 196-199: Guessed to be kernel CRC - unsigned char reserved4[16]; // 200-215: Reserved area; unused at present - unsigned char imageCRC[4]; // 216-219: CRC32 of images - unsigned char reserved2[12]; // 220-231: Unused at present - unsigned char tagIdCRC[4]; // 232-235: CRC32 to ensure validity of tagId - unsigned char headerCRC[4]; // 236-239: CRC32 of header excluding tagVersion - unsigned char reserved3[16]; // 240-255: Unused at present -}; - -struct bcm_tag_bc310 { - unsigned char tagVersion[4]; // 0-3: Version of the image tag - unsigned char sig_1[20]; // 4-23: Company Line 1 - unsigned char sig_2[14]; // 24-37: Company Line 2 - unsigned char chipid[6]; // 38-43: Chip this image is for - unsigned char boardid[16]; // 44-59: Board name - unsigned char big_endian[2]; // 60-61: Map endianness -- 1 BE 0 LE - unsigned char totalLength[IMAGE_LEN]; // 62-71: Total length of image - unsigned char cfeAddress[ADDRESS_LEN]; // 72-83: Address in memory of CFE - unsigned char cfeLength[IMAGE_LEN]; // 84-93: Size of CFE - unsigned char flashImageStart[ADDRESS_LEN]; // 94-105: Address in memory of kernel (start of image) - unsigned char flashRootLength[IMAGE_LEN]; // 106-115: Size of rootfs + deadcode (web flash uses this + kernelLength to determine the size of the kernel+rootfs flash image) - unsigned char kernelAddress[ADDRESS_LEN]; // 116-127: Address in memory of kernel - unsigned char kernelLength[IMAGE_LEN]; // 128-137: Size of kernel - unsigned char dualImage[2]; // 138-139: Unused at present - unsigned char inactiveFlag[2]; // 140-141: Unused at present - unsigned char information1[TAGINFO_LEN]; // 142-161: Unused at present; Some vendors use this for optional information - unsigned char tagId[6]; // 162-167: Identifies which type of tag this is, currently two-letter company code, and then three digits for version of broadcom code in which this tag was first introduced - unsigned char tagIdCRC[4]; // 168-171: CRC32 to ensure validity of tagId - unsigned char rootAddress[ADDRESS_LEN]; // 172-183: Address in memory of rootfs partition - unsigned char rootLength[IMAGE_LEN]; // 184-193: Size of rootfs partition - unsigned char reserved1[22]; // 193-215: Reserved area not in use - unsigned char imageCRC[4]; // 216-219: CRC32 of images - unsigned char rootfsCRC[4]; // 220-227: CRC32 of rootfs partition - unsigned char kernelCRC[4]; // 224-227: CRC32 of kernel partition - unsigned char reserved2[8]; // 228-235: Unused at present - unsigned char headerCRC[4]; // 235-239: CRC32 of header excluding tagVersion - unsigned char reserved3[16]; // 240-255: Unused at present -}; - -union bcm_tag { - struct bcm_tag_bccfe bccfe; - struct bcm_tag_bc300 bc300; - struct bcm_tag_ag306 ag306; - struct bcm_tag_bc221 bc221; - struct bcm_tag_bc310 bc310; -}; - -#endif /* __BCM63XX_TAG_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/board_bcm963xx.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/board_bcm963xx.h deleted file mode 100644 index e5b916036f..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/board_bcm963xx.h +++ /dev/null @@ -1,64 +0,0 @@ -#ifndef BOARD_BCM963XX_H_ -#define BOARD_BCM963XX_H_ - -#include <linux/types.h> -#include <linux/gpio.h> -#include <linux/leds.h> -#include <bcm63xx_dev_enet.h> -#include <bcm63xx_dev_dsp.h> - -/* - * flash mapping - */ -#define BCM963XX_CFE_VERSION_OFFSET 0x570 -#define BCM963XX_NVRAM_OFFSET 0x580 - -/* - * nvram structure - */ -struct bcm963xx_nvram { - u32 version; - u8 reserved1[256]; - u8 name[16]; - u32 main_tp_number; - u32 psi_size; - u32 mac_addr_count; - u8 mac_addr_base[6]; - u8 reserved2[2]; - u32 checksum_old; - u8 reserved3[720]; - u32 checksum_high; -}; - -/* - * board definition - */ -struct board_info { - u8 name[16]; - unsigned int expected_cpu_id; - - /* enabled feature/device */ - unsigned int has_enet0:1; - unsigned int has_enet1:1; - unsigned int has_pci:1; - unsigned int has_pccard:1; - unsigned int has_ohci0:1; - unsigned int has_ehci0:1; - unsigned int has_udc0:1; - unsigned int has_dsp:1; - - /* ethernet config */ - struct bcm63xx_enet_platform_data enet0; - struct bcm63xx_enet_platform_data enet1; - - /* DSP config */ - struct bcm63xx_dsp_platform_data dsp; - - /* GPIO LEDs */ - struct gpio_led leds[8]; - - /* Reset button */ - struct gpio_button reset_buttons[1]; -}; - -#endif /* ! BOARD_BCM963XX_H_ */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h deleted file mode 100644 index 71742bac94..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/cpu-feature-overrides.h +++ /dev/null @@ -1,51 +0,0 @@ -#ifndef __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H -#define __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H - -#include <bcm63xx_cpu.h> - -#define cpu_has_tlb 1 -#define cpu_has_4kex 1 -#define cpu_has_4k_cache 1 -#define cpu_has_fpu 0 -#define cpu_has_32fpr 0 -#define cpu_has_counter 1 -#define cpu_has_watch 0 -#define cpu_has_divec 1 -#define cpu_has_vce 0 -#define cpu_has_cache_cdex_p 0 -#define cpu_has_cache_cdex_s 0 -#define cpu_has_prefetch 1 -#define cpu_has_mcheck 1 -#define cpu_has_ejtag 1 -#define cpu_has_llsc 1 -#define cpu_has_mips16 0 -#define cpu_has_mdmx 0 -#define cpu_has_mips3d 0 -#define cpu_has_smartmips 0 -#define cpu_has_vtag_icache 0 - -#if !defined(BCMCPU_RUNTIME_DETECT) && (defined(CONFIG_BCMCPU_IS_6348) || defined(CONFIG_CPU_IS_6338) || defined(CONFIG_CPU_IS_BCM6345)) -#define cpu_has_dc_aliases 0 -#endif - -#define cpu_has_ic_fills_f_dc 0 -#define cpu_has_pindexed_dcache 0 - -#define cpu_has_mips32r1 1 -#define cpu_has_mips32r2 0 -#define cpu_has_mips64r1 0 -#define cpu_has_mips64r2 0 - -#define cpu_has_dsp 0 -#define cpu_has_mipsmt 0 -#define cpu_has_userlocal 0 - -#define cpu_has_nofpuex 0 -#define cpu_has_64bits 0 -#define cpu_has_64bit_zero_reg 0 - -#define cpu_dcache_line_size() 16 -#define cpu_icache_line_size() 16 -#define cpu_scache_line_size() 0 - -#endif /* __ASM_MACH_BCM963XX_CPU_FEATURE_OVERRIDES_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/gpio.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/gpio.h deleted file mode 100644 index 7cda8c0a39..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/gpio.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef __ASM_MIPS_MACH_BCM63XX_GPIO_H -#define __ASM_MIPS_MACH_BCM63XX_GPIO_H - -#include <bcm63xx_gpio.h> - -#define gpio_to_irq(gpio) NULL - -#define gpio_get_value __gpio_get_value -#define gpio_set_value __gpio_set_value - -#define gpio_cansleep __gpio_cansleep - -#include <asm-generic/gpio.h> - -#endif /* __ASM_MIPS_MACH_BCM63XX_GPIO_H */ diff --git a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/war.h b/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/war.h deleted file mode 100644 index 8e3f3fdf32..0000000000 --- a/target/linux/brcm63xx/files-2.6.30/include/asm-mips/mach-bcm63xx/war.h +++ /dev/null @@ -1,25 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> - */ -#ifndef __ASM_MIPS_MACH_BCM63XX_WAR_H -#define __ASM_MIPS_MACH_BCM63XX_WAR_H - -#define R4600_V1_INDEX_ICACHEOP_WAR 0 -#define R4600_V1_HIT_CACHEOP_WAR 0 -#define R4600_V2_HIT_CACHEOP_WAR 0 -#define R5432_CP0_INTERRUPT_WAR 0 -#define BCM1250_M3_WAR 0 -#define SIBYTE_1956_WAR 0 -#define MIPS4K_ICACHE_REFILL_WAR 0 -#define MIPS_CACHE_SYNC_WAR 0 -#define TX49XX_ICACHE_INDEX_INV_WAR 0 -#define RM9000_CDEX_SMP_WAR 0 -#define ICACHE_REFILLS_WORKAROUND_WAR 0 -#define R10000_LLSC_WAR 0 -#define MIPS34K_MISSED_ITLB_WAR 0 - -#endif /* __ASM_MIPS_MACH_BCM63XX_WAR_H */ |