aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/imx6/files-3.10
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/imx6/files-3.10')
-rw-r--r--target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts122
-rw-r--r--target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts202
-rw-r--r--target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts204
3 files changed, 374 insertions, 154 deletions
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
index 2f9215028a..e4c6df6585 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6dl-gw51xx.dts
@@ -23,30 +23,15 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
- ipu0 = &ipu1;
led0 = &led0;
led1 = &led1;
nand = &gpmi;
- pwm0 = &pwm1;
- pwm1 = &pwm2;
- pwm2 = &pwm3;
- pwm3 = &pwm4;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
- ssi0 = &ssi1;
- ssi1 = &ssi2;
- usb0 = &usbh3;
+ usb0 = &usbh1;
usb1 = &usbotg;
- usdhc0 = &usdhc1;
- usdhc1 = &usdhc2;
- usdhc2 = &usdhc3;
- usdhc3 = &usdhc4;
};
memory {
- reg = <0x10000000 0x40000000>;
+ reg = <0x10000000 0x20000000>;
};
leds {
@@ -69,14 +54,6 @@
regulators {
compatible = "simple-bus";
- reg_2p5v: 2p5v {
- compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
- regulator-always-on;
- };
-
reg_3p3v: 3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
@@ -85,6 +62,14 @@
regulator-always-on;
};
+ reg_5p0v: 5p0v {
+ compatible = "regulator-fixed";
+ regulator-name = "5P0V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
@@ -111,16 +96,10 @@
};
&i2c1 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
+ status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
@@ -146,11 +125,6 @@
pagesize = <16>;
};
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
@@ -162,20 +136,72 @@
compatible = "gw,gsp";
reg = <0x29>;
};
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
};
&i2c2 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
+
+ pmic: ltc3676@3c {
+ compatible = "ltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: ltc3676__sw1 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: ltc3676__sw2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: ltc3676__sw3 {
+ regulator-min-microvolt = <1175000>;
+ regulator-max-microvolt = <1175000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: ltc3676__sw4 {
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ltc3676__ldo2 {
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo4_reg: ltc3676__ldo4 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+ };
+ };
};
&i2c3 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
videoin: adv7180@20 {
compatible = "adi,adv7180";
@@ -190,13 +216,13 @@
hog {
pinctrl_hog: hoggrp {
fsl,pins = <
- MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
- MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
- MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
- MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
- MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
MX6DL_PAD_EIM_A19__GPIO2_IO19 0x80000000 /* MEZZ_DIO0 */
MX6DL_PAD_EIM_A20__GPIO2_IO18 0x80000000 /* MEZZ_DIO1 */
+ MX6DL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
+ MX6DL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* PHY Reset */
+ MX6DL_PAD_GPIO_0__GPIO1_IO00 0x80000000 /* PCIE_RST# */
+ MX6DL_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
+ MX6DL_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
>;
};
};
@@ -231,6 +257,14 @@
status = "okay";
};
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
+};
+
&usbh1 {
status = "okay";
};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
index a027ed9db7..825d952ba2 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw5400-a.dts
@@ -23,29 +23,15 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
- ipu0 = &ipu1;
- ipu1 = &ipu2;
led0 = &led0;
led1 = &led1;
led2 = &led2;
- pwm0 = &pwm1;
- pwm1 = &pwm2;
- pwm2 = &pwm3;
- pwm3 = &pwm4;
sky2 = &eth1;
ssi0 = &ssi1;
- ssi1 = &ssi2;
spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
- spi4 = &ecspi5;
- usb0 = &usbh3;
+ usb0 = &usbh1;
usb1 = &usbotg;
- usdhc0 = &usdhc1;
- usdhc1 = &usdhc2;
usdhc2 = &usdhc3;
- usdhc3 = &usdhc4;
};
chosen {
@@ -82,11 +68,11 @@
regulators {
compatible = "simple-bus";
- reg_2p5v: 2p5v {
+ reg_1p0v: 1p0v {
compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
@@ -98,6 +84,14 @@
regulator-always-on;
};
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
@@ -125,7 +119,7 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_3>;
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
@@ -152,16 +146,10 @@
};
&i2c1 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
+ status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
@@ -187,11 +175,6 @@
pagesize = <16>;
};
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
@@ -203,17 +186,116 @@
compatible = "gw,gsp";
reg = <0x29>;
};
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
};
&i2c2 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
- pmic: pfuze@08 {
+ pmic: pfuze100@08 {
compatible = "fsl,pfuze100";
reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
};
pciswitch: pex8609@3f {
@@ -228,22 +310,35 @@
};
&i2c3 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ accelerometer: mma8450@1c {
+ compatible = "fsl,mma8450";
+ reg = <0x1c>;
+ };
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
- VDDA-supply = <&reg_2p5v>;
+ VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;
};
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
@@ -255,17 +350,6 @@
compatible = "adi,adv7180";
reg = <0x20>;
};
-
- hdmiin: adv7611@4c {
- compatible = "adi,adv7611";
- reg = <0x4c>;
- };
-
- touchscreen: egalax_ts@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- wakeup-gpios = <&gpio1 12 0>;
- };
};
&iomuxc {
@@ -277,14 +361,15 @@
fsl,pins = <
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
+ MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6Q_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* user2 led */
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
- MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
- MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
- MX6Q_PAD_GPIO_0__CCM_CLKO1 0x80000000 /* AUD4_MCK */
>;
};
};
@@ -332,12 +417,21 @@
};
&uart5 {
- status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <&reg_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_1>;
+ disable-over-current;
+ status = "okay";
};
&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};
diff --git a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
index 9c2c4471ac..bc66c3eb4c 100644
--- a/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
+++ b/target/linux/imx6/files-3.10/arch/arm/boot/dts/imx6q-gw54xx.dts
@@ -24,30 +24,15 @@
i2c0 = &i2c1;
i2c1 = &i2c2;
i2c2 = &i2c3;
- ipu0 = &ipu1;
- ipu1 = &ipu2;
led0 = &led0;
led1 = &led1;
led2 = &led2;
nand = &gpmi;
- pwm0 = &pwm1;
- pwm1 = &pwm2;
- pwm2 = &pwm3;
- pwm3 = &pwm4;
sky2 = &eth1;
- spi0 = &ecspi1;
- spi1 = &ecspi2;
- spi2 = &ecspi3;
- spi3 = &ecspi4;
- spi4 = &ecspi5;
ssi0 = &ssi1;
- ssi1 = &ssi2;
- usb0 = &usbh3;
+ usb0 = &usbh1;
usb1 = &usbotg;
- usdhc0 = &usdhc1;
- usdhc1 = &usdhc2;
usdhc2 = &usdhc3;
- usdhc3 = &usdhc4;
};
chosen {
@@ -84,11 +69,11 @@
regulators {
compatible = "simple-bus";
- reg_2p5v: 2p5v {
+ reg_1p0v: 1p0v {
compatible = "regulator-fixed";
- regulator-name = "2P5V";
- regulator-min-microvolt = <2500000>;
- regulator-max-microvolt = <2500000>;
+ regulator-name = "1P0V";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
regulator-always-on;
};
@@ -100,6 +85,14 @@
regulator-always-on;
};
+ reg_usb_h1_vbus: usb_h1_vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_h1_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
reg_usb_otg_vbus: usb_otg_vbus {
compatible = "regulator-fixed";
regulator-name = "usb_otg_vbus";
@@ -127,7 +120,7 @@
&audmux {
pinctrl-names = "default";
- pinctrl-0 = <&pinctrl_audmux_3>;
+ pinctrl-0 = <&pinctrl_audmux_1>;
status = "okay";
};
@@ -150,16 +143,10 @@
};
&i2c1 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1_1>;
-
- eeprom: eeprom@50 {
- compatible = "atmel,24c02";
- reg = <0x50>;
- pagesize = <16>;
- };
+ status = "okay";
eeprom1: eeprom@50 {
compatible = "atmel,24c02";
@@ -185,11 +172,6 @@
pagesize = <16>;
};
- rtc: ds1672@68 {
- compatible = "dallas,ds1672";
- reg = <0x68>;
- };
-
gpio: pca9555@23 {
compatible = "nxp,pca9555";
reg = <0x23>;
@@ -201,17 +183,116 @@
compatible = "gw,gsp";
reg = <0x29>;
};
+
+ rtc: ds1672@68 {
+ compatible = "dallas,ds1672";
+ reg = <0x68>;
+ };
};
&i2c2 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2_2>;
+ status = "okay";
- pmic: pfuze@08 {
+ pmic: pfuze100@08 {
compatible = "fsl,pfuze100";
reg = <0x08>;
+
+ regulators {
+ sw1a_reg: sw1ab {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw1c_reg: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3a_reg: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3b_reg: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ swbst_reg: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ };
+
+ snvs_reg: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vref_reg: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vgen1_reg: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen2_reg: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ vgen3_reg: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vgen4_reg: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen5_reg: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ vgen6_reg: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
};
pciswitch: pex8609@3f {
@@ -226,22 +307,35 @@
};
&i2c3 {
- status = "okay";
clock-frequency = <100000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c3_2>;
+ status = "okay";
+
+ accelerometer: fxos8700@1e {
+ compatible = "fsl,fxos8700";
+ reg = <0x1e>;
+ };
codec: sgtl5000@0a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks 169>;
- VDDA-supply = <&reg_2p5v>;
+ VDDA-supply = <&sw4_reg>;
VDDIO-supply = <&reg_3p3v>;
};
- accelerometer: mma8450@1c {
- compatible = "fsl,mma8450";
- reg = <0x1c>;
+ hdmiin: adv7611@4c {
+ compatible = "adi,adv7611";
+ reg = <0x4c>;
+ };
+
+ touchscreen: egalax_ts@04 {
+ compatible = "eeti,egalax_ts";
+ reg = <0x04>;
+ interrupt-parent = <&gpio7>;
+ interrupts = <12 2>; /* gpio7_12 active low */
+ wakeup-gpios = <&gpio7 12 0>;
};
videoout: adv7393@2a {
@@ -253,17 +347,6 @@
compatible = "adi,adv7180";
reg = <0x20>;
};
-
- hdmiin: adv7611@4c {
- compatible = "adi,adv7611";
- reg = <0x4c>;
- };
-
- touchscreen: egalax_ts@04 {
- compatible = "eeti,egalax_ts";
- reg = <0x04>;
- wakeup-gpios = <&gpio1 12 0>;
- };
};
&iomuxc {
@@ -275,20 +358,28 @@
fsl,pins = <
MX6Q_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* OTG_PWR_EN */
MX6Q_PAD_EIM_D19__GPIO3_IO19 0x80000000 /* SPINOR_CS0# */
+ MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
+ MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
+ MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
+ MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
+ MX6Q_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* TOUCH_IRQ# */
MX6Q_PAD_KEY_COL0__GPIO4_IO06 0x80000000 /* user1 led */
MX6Q_PAD_KEY_ROW0__GPIO4_IO07 0x80000000 /* user2 led */
MX6Q_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* user3 led */
MX6Q_PAD_SD1_DAT0__GPIO1_IO16 0x80000000 /* USBHUB_RST# */
- MX6Q_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* PCIE IRQ */
- MX6Q_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 /* PCIE RST */
MX6Q_PAD_SD1_DAT3__GPIO1_IO21 0x80000000 /* MIPI_DIO */
- MX6Q_PAD_GPIO_0__CCM_CLKO1 0x000130b0 /* AUD4_MCK */
- MX6Q_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAN_STBY */
>;
};
};
};
+&ldb {
+ status = "okay";
+ lvds-channel@0 {
+ crtcs = <&ipu1 0>, <&ipu1 1>, <&ipu2 0>, <&ipu2 1>;
+ };
+};
+
&pcie {
reset-gpio = <&gpio1 29 0>;
status = "okay";
@@ -328,9 +419,9 @@
};
&uart5 {
- status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5_1>;
+ status = "okay";
};
&usbotg {
@@ -342,6 +433,7 @@
};
&usbh1 {
+ vbus-supply = <&reg_usb_h1_vbus>;
status = "okay";
};