diff options
Diffstat (limited to 'target/linux/kirkwood/patches-3.10')
| -rw-r--r-- | target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch | 130 |
1 files changed, 130 insertions, 0 deletions
diff --git a/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch b/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch new file mode 100644 index 0000000000..5cff4a3247 --- /dev/null +++ b/target/linux/kirkwood/patches-3.10/120-pogoplug_e02.patch @@ -0,0 +1,130 @@ +--- /dev/null ++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts +@@ -0,0 +1,117 @@ ++/dts-v1/; ++ ++/include/ "kirkwood.dtsi" ++/include/ "kirkwood-6281.dtsi" ++ ++/ { ++ model = "Cloud Engines Pogoplug E02"; ++ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281", "marvell,kirkwood"; ++ ++ memory { ++ device_type = "memory"; ++ reg = <0x00000000 0x10000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,115200n8 earlyprintk"; ++ }; ++ ++ ocp@f1000000 { ++ pinctrl: pinctrl@10000 { ++ ++ pinctrl-0 = < &pmx_usb_power_enable &pmx_led_orange ++ &pmx_led_green >; ++ pinctrl-names = "default"; ++ ++ pmx_usb_power_enable: pmx-usb-power-enable { ++ marvell,pins = "mpp29"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_green: pmx-led_green { ++ marvell,pins = "mpp48"; ++ marvell,function = "gpio"; ++ }; ++ pmx_led_orange: pmx-led_orange { ++ marvell,pins = "mpp49"; ++ marvell,function = "gpio"; ++ }; ++ }; ++ ++ serial@12000 { ++ status = "okay"; ++ }; ++ ++ nand@3000000 { ++ status = "okay"; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0000000 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "uImage"; ++ reg = <0x0100000 0x400000>; ++ }; ++ ++ partition@500000 { ++ label = "rootfs"; ++ reg = <0x0500000 0x2000000>; ++ }; ++ ++ partition@2500000 { ++ label = "data"; ++ reg = <0x2500000 0x5b00000>; ++ }; ++ }; ++ }; ++ ++ gpio-leds { ++ compatible = "gpio-leds"; ++ ++ health { ++ label = "status:green:health"; ++ gpios = <&gpio1 16 1>; ++ linux,default-trigger = "default-on"; ++ }; ++ fault { ++ label = "status:orange:fault"; ++ gpios = <&gpio1 17 1>; ++ }; ++ }; ++ ++ regulators { ++ compatible = "simple-bus"; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ usb_power: regulator@1 { ++ compatible = "regulator-fixed"; ++ reg = <1>; ++ regulator-name = "USB Power"; ++ regulator-min-microvolt = <5000000>; ++ regulator-max-microvolt = <5000000>; ++ enable-active-high; ++ regulator-always-on; ++ regulator-boot-on; ++ gpio = <&gpio0 29 0>; ++ }; ++ }; ++}; ++ ++&mdio { ++ status = "okay"; ++ ++ ethphy0: ethernet-phy@0 { ++ device_type = "ethernet-phy"; ++ reg = <0>; ++ }; ++}; ++ ++ð0 { ++ status = "okay"; ++ ++ ethernet0-port@0 { ++ phy-handle = <ðphy0>; ++ }; ++}; +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -86,6 +86,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood- + kirkwood-ns2max.dtb \ + kirkwood-ns2mini.dtb \ + kirkwood-nsa310.dtb \ ++ kirkwood-pogo_e02.dtb \ + kirkwood-topkick.dtb \ + kirkwood-ts219-6281.dtb \ + kirkwood-ts219-6282.dtb \ |