diff options
Diffstat (limited to 'target/linux/lantiq/image/FRITZ3370.dts')
| -rw-r--r-- | target/linux/lantiq/image/FRITZ3370.dts | 278 |
1 files changed, 0 insertions, 278 deletions
diff --git a/target/linux/lantiq/image/FRITZ3370.dts b/target/linux/lantiq/image/FRITZ3370.dts deleted file mode 100644 index df3089286d..0000000000 --- a/target/linux/lantiq/image/FRITZ3370.dts +++ /dev/null @@ -1,278 +0,0 @@ -/dts-v1/; - -/include/ "vr9.dtsi" - -/ { - model = "FRITZ3370 - Fritz!Box WLAN 3370"; - - chosen { - bootargs = "console=ttyLTQ0,115200 init=/etc/preinit rootfstype=jffs2"; - }; - - memory@0 { - reg = <0x0 0x8000000>; - }; - - fpi@10000000 { - localbus@0 { - nand-parts@0 { - compatible = "gen_nand", "lantiq,nand-xway"; - bank-width = <2>; - reg = <1 0x0 0x2000000>; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "kernel"; - reg = <0x00000 0x400000>; - }; - - partition@400000 { - label = "rootfs"; - reg = <0x400000 0x3000000>; - }; - - partition@3400000 { - label = "vr9_firmware"; - reg = <0x3400000 0x400000>; - }; - partition@3800000 { - label = "reserved"; - reg = <0x3800000 0x3000000>; - }; - partition@6800000 { - label = "config"; - reg = <0x6800000 0x200000>; - }; - partition@6a00000 { - label = "nand-filesystem"; - reg = <0x6a00000 0x1600000>; - }; - }; - }; - - spi@E100800 { - compatible = "lantiq,spi-xway-broken"; - reg = <0xE100800 0x100>; - interrupt-parent = <&icu0>; - interrupts = <22 23 24>; - #address-cells = <1>; - #size-cells = <1>; - - m25p80@0 { - #address-cells = <1>; - #size-cells = <1>; - compatible = "s25fl129p0"; - reg = <0 0>; - linux,modalias = "m25p80", "mx25l3205d"; - spi-max-frequency = <1000000>; - - partition@0 { - reg = <0x0 0x20000>; - label = "SPI (RO) U-Boot Image"; - read-only; - }; - - partition@20000 { - reg = <0x20000 0x10000>; - label = "ENV_MAC"; - read-only; - }; - - partition@30000 { - reg = <0x30000 0x10000>; - label = "DPF"; - read-only; - }; - - partition@40000 { - reg = <0x40000 0x10000>; - label = "NVRAM"; - read-only; - }; - - partition@500000 { - reg = <0x50000 0x003a0000>; - label = "kernel"; - }; - }; - }; - - gpio: pinmux@E100B10 { - pinctrl-names = "default"; - pinctrl-0 = <&state_default>; - - state_default: pinmux { - spi { - lantiq,groups = "spi", "spi_cs4"; - lantiq,function = "spi"; - }; - nand_out { - lantiq,groups = "nand cle", "nand ale", "nand rd", "ebu a23", "ebu a24"; - lantiq,function = "ebu"; - lantiq,direction = <1>; - lantiq,pull = <0>; - }; - nand_in { - lantiq,groups = "nand rdy"; - lantiq,function = "ebu"; - lantiq,direction = <0>; - lantiq,open-drain = <1>; - lantiq,pull = <2>; - }; - mdio { - lantiq,groups = "mdio"; - lantiq,function = "mdio"; - }; - phy-rst { - lantiq,pins = "io37", "io44"; - lantiq,pull = <0>; - lantiq,open-drain = <0>; - lantiq,output = <1>; - }; - pcie-rst { - lantiq,pins = "io38"; - lantiq,pull = <0>; - lantiq,output = <1>; - }; - }; - }; - - eth@E108000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-net"; - reg = < 0xE108000 0x3000 /* switch */ - 0xE10B100 0x70 /* mdio */ - 0xE10B1D8 0x30 /* mii */ - 0xE10B308 0x30 /* pmac */ - >; - interrupt-parent = <&icu0>; - interrupts = <73 72>; - - lan: interface@0 { - compatible = "lantiq,xrx200-pdi"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - mac-address = [ 00 11 22 33 44 55 ]; - - ethernet@0 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <0>; - phy-mode = "rgmii"; - phy-handle = <&phy0>; - gpios = <&gpio 37 0>; - }; - ethernet@1 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <1>; - phy-mode = "rgmii"; - phy-handle = <&phy1>; - gpios = <&gpio 44 0>; - }; - ethernet@2 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <2>; - phy-mode = "gmii"; - phy-handle = <&phy11>; - }; - ethernet@3 { - compatible = "lantiq,xrx200-pdi-port"; - reg = <4>; - phy-mode = "gmii"; - phy-handle = <&phy13>; - }; - }; - - mdio@0 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "lantiq,xrx200-mdio"; - phy0: ethernet-phy@0 { - reg = <0x0>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - phy1: ethernet-phy@1 { - reg = <0x1>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - phy11: ethernet-phy@11 { - reg = <0x11>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - phy13: ethernet-phy@13 { - reg = <0x13>; - compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; - lantiq,c45-reg-init = <1 0 0 0>; - }; - }; - }; - - ifxhcd@E101000 { - status = "okay"; - gpios = <&gpio 5 0 - &gpio 14 0>; - lantiq,portmask = <0x3>; - }; - }; - - gphy-xrx200 { - compatible = "lantiq,phy-xrx200"; - firmware = "lantiq/vr9_phy11g_a1x.bin"; - phys = [ 00 01 ]; - }; - - gpio-keys-polled { - compatible = "gpio-keys-polled"; - #address-cells = <1>; - #size-cells = <0>; - poll-interval = <100>; - power { - label = "power"; - gpios = <&gpio 1 0>; - linux,code = <0x100>; - }; -/* wifi { - label = "wifi"; - gpios = <&gpio 29 0>; - linux,code = <0x101>; - };*/ - }; - - gpio-leds { - compatible = "gpio-leds"; - - power { - label = "power"; - gpios = <&gpio 32 1>; - }; - power2 { - label = "power2"; - gpios = <&gpio 33 1>; - }; - info_red { - label = "info_red"; - gpios = <&gpio 34 1>; - }; - wifi { - label = "wifi"; - gpios = <&gpio 35 1>; - }; - dsl { - label = "dsl"; - gpios = <&gpio 36 1>; - }; - lan { - label = "lan"; - gpios = <&gpio 38 1>; - }; - info_green { - label = "info_green"; - gpios = <&gpio 47 1>; - }; - }; -}; |