aboutsummaryrefslogtreecommitdiffstats
path: root/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
diff options
context:
space:
mode:
Diffstat (limited to 'target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch')
-rw-r--r--target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch1370
1 files changed, 1370 insertions, 0 deletions
diff --git a/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
new file mode 100644
index 0000000000..a7ce3ed7ff
--- /dev/null
+++ b/target/linux/mvebu/patches-3.10/0059-ARM-mvebu-Relocate-Armada-370-XP-PCIe-device-tree-no.patch
@@ -0,0 +1,1370 @@
+From db5029d82c4f0685438ea38eb3fbaadac46a22ba Mon Sep 17 00:00:00 2001
+From: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Date: Wed, 12 Jun 2013 18:02:19 -0300
+Subject: [PATCH 059/203] ARM: mvebu: Relocate Armada 370/XP PCIe device tree
+ nodes
+
+Now that mbus has been added to the device tree, it's possible to
+move the PCIe nodes out of internal registers, placing it directly
+below the mbus. This is a more accurate representation of the
+hardware.
+
+Moving the PCIe nodes, we now need to introduce an extra cell to
+encode the window target ID and attribute. Since this depends on
+the PCIe port, we split the ranges translation entries, to correspond
+to each MBus window.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
+Tested-by: Andrew Lunn <andrew@lunn.ch>
+Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>
+---
+ arch/arm/boot/dts/armada-370-mirabox.dts | 32 +-
+ arch/arm/boot/dts/armada-370-xp.dtsi | 2 +
+ arch/arm/boot/dts/armada-370.dtsi | 101 +++---
+ arch/arm/boot/dts/armada-xp-db.dts | 67 ++--
+ arch/arm/boot/dts/armada-xp-gp.dts | 42 +--
+ arch/arm/boot/dts/armada-xp-mv78230.dtsi | 222 ++++++------
+ arch/arm/boot/dts/armada-xp-mv78260.dtsi | 261 ++++++++-------
+ arch/arm/boot/dts/armada-xp-mv78460.dtsi | 409 ++++++++++++-----------
+ arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts | 18 +-
+ 9 files changed, 612 insertions(+), 542 deletions(-)
+
+--- a/arch/arm/boot/dts/armada-370-mirabox.dts
++++ b/arch/arm/boot/dts/armada-370-mirabox.dts
+@@ -28,6 +28,22 @@
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0xfff00000 0x100000>;
+
++ pcie-controller {
++ status = "okay";
++
++ /* Internal mini-PCIe connector */
++ pcie@1,0 {
++ /* Port 0, Lane 0 */
++ status = "okay";
++ };
++
++ /* Connected on the PCB to a USB 3.0 XHCI controller */
++ pcie@2,0 {
++ /* Port 1, Lane 0 */
++ status = "okay";
++ };
++ };
++
+ internal-regs {
+ serial@12000 {
+ clock-frequency = <200000000>;
+@@ -123,22 +139,6 @@
+ reg = <0x25>;
+ };
+ };
+-
+- pcie-controller {
+- status = "okay";
+-
+- /* Internal mini-PCIe connector */
+- pcie@1,0 {
+- /* Port 0, Lane 0 */
+- status = "okay";
+- };
+-
+- /* Connected on the PCB to a USB 3.0 XHCI controller */
+- pcie@2,0 {
+- /* Port 1, Lane 0 */
+- status = "okay";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-370-xp.dtsi
++++ b/arch/arm/boot/dts/armada-370-xp.dtsi
+@@ -35,6 +35,8 @@
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ interrupt-parent = <&mpic>;
++ pcie-mem-aperture = <0xe0000000 0x8000000>;
++ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ devbus-bootcs {
+ compatible = "marvell,mvebu-devbus";
+--- a/arch/arm/boot/dts/armada-370.dtsi
++++ b/arch/arm/boot/dts/armada-370.dtsi
+@@ -36,6 +36,59 @@
+ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+ };
+
++ pcie-controller {
++ compatible = "marvell,armada-370-pcie";
++ status = "disabled";
++ device_type = "pci";
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bus-range = <0x00 0xff>;
++
++ ranges =
++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000
++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000
++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
++ 0x82000000 0x2 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
++ 0x81000000 0x2 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */>;
++
++ pcie@1,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
++ reg = <0x0800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
++ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 58>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 5>;
++ status = "disabled";
++ };
++
++ pcie@2,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
++ reg = <0x1000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
++ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 62>;
++ marvell,pcie-port = <1>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 9>;
++ status = "disabled";
++ };
++ };
++
+ internal-regs {
+ system-controller@18200 {
+ compatible = "marvell,armada-370-xp-system-controller";
+@@ -174,54 +227,6 @@
+ 0x18304 0x4>;
+ status = "okay";
+ };
+-
+- pcie-controller {
+- compatible = "marvell,armada-370-pcie";
+- status = "disabled";
+- device_type = "pci";
+-
+- #address-cells = <3>;
+- #size-cells = <2>;
+-
+- bus-range = <0x00 0xff>;
+-
+- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+-
+- pcie@1,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+- reg = <0x0800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 58>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 5>;
+- status = "disabled";
+- };
+-
+- pcie@2,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+- reg = <0x1000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 62>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 9>;
+- status = "disabled";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-db.dts
++++ b/arch/arm/boot/dts/armada-xp-db.dts
+@@ -62,6 +62,39 @@
+ };
+ };
+
++ pcie-controller {
++ status = "okay";
++
++ /*
++ * All 6 slots are physically present as
++ * standard PCIe slots on the board.
++ */
++ pcie@1,0 {
++ /* Port 0, Lane 0 */
++ status = "okay";
++ };
++ pcie@2,0 {
++ /* Port 0, Lane 1 */
++ status = "okay";
++ };
++ pcie@3,0 {
++ /* Port 0, Lane 2 */
++ status = "okay";
++ };
++ pcie@4,0 {
++ /* Port 0, Lane 3 */
++ status = "okay";
++ };
++ pcie@9,0 {
++ /* Port 2, Lane 0 */
++ status = "okay";
++ };
++ pcie@10,0 {
++ /* Port 3, Lane 0 */
++ status = "okay";
++ };
++ };
++
+ internal-regs {
+ serial@12000 {
+ clock-frequency = <250000000>;
+@@ -155,40 +188,6 @@
+ spi-max-frequency = <20000000>;
+ };
+ };
+-
+- pcie-controller {
+- status = "okay";
+-
+- /*
+- * All 6 slots are physically present as
+- * standard PCIe slots on the board.
+- */
+- pcie@1,0 {
+- /* Port 0, Lane 0 */
+- status = "okay";
+- };
+- pcie@2,0 {
+- /* Port 0, Lane 1 */
+- status = "okay";
+- };
+- pcie@3,0 {
+- /* Port 0, Lane 2 */
+- status = "okay";
+- };
+- pcie@4,0 {
+- /* Port 0, Lane 3 */
+- status = "okay";
+- };
+- pcie@9,0 {
+- /* Port 2, Lane 0 */
+- status = "okay";
+- };
+- pcie@10,0 {
+- /* Port 3, Lane 0 */
+- status = "okay";
+- };
+- };
+-
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-gp.dts
++++ b/arch/arm/boot/dts/armada-xp-gp.dts
+@@ -71,6 +71,27 @@
+ };
+ };
+
++ pcie-controller {
++ status = "okay";
++
++ /*
++ * The 3 slots are physically present as
++ * standard PCIe slots on the board.
++ */
++ pcie@1,0 {
++ /* Port 0, Lane 0 */
++ status = "okay";
++ };
++ pcie@9,0 {
++ /* Port 2, Lane 0 */
++ status = "okay";
++ };
++ pcie@10,0 {
++ /* Port 3, Lane 0 */
++ status = "okay";
++ };
++ };
++
+ internal-regs {
+ serial@12000 {
+ clock-frequency = <250000000>;
+@@ -154,27 +175,6 @@
+ spi-max-frequency = <108000000>;
+ };
+ };
+-
+- pcie-controller {
+- status = "okay";
+-
+- /*
+- * The 3 slots are physically present as
+- * standard PCIe slots on the board.
+- */
+- pcie@1,0 {
+- /* Port 0, Lane 0 */
+- status = "okay";
+- };
+- pcie@9,0 {
+- /* Port 2, Lane 0 */
+- status = "okay";
+- };
+- pcie@10,0 {
+- /* Port 3, Lane 0 */
+- status = "okay";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-mv78230.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78230.dtsi
+@@ -44,6 +44,124 @@
+ };
+
+ soc {
++ /*
++ * MV78230 has 2 PCIe units Gen2.0: One unit can be
++ * configured as x4 or quad x1 lanes. One unit is
++ * x4/x1.
++ */
++ pcie-controller {
++ compatible = "marvell,armada-xp-pcie";
++ status = "disabled";
++ device_type = "pci";
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bus-range = <0x00 0xff>;
++
++ ranges =
++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
++ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
++ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */>;
++
++ pcie@1,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
++ reg = <0x0800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
++ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 58>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 5>;
++ status = "disabled";
++ };
++
++ pcie@2,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
++ reg = <0x1000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
++ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 59>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <1>;
++ clocks = <&gateclk 6>;
++ status = "disabled";
++ };
++
++ pcie@3,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
++ reg = <0x1800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
++ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 60>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <2>;
++ clocks = <&gateclk 7>;
++ status = "disabled";
++ };
++
++ pcie@4,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
++ reg = <0x2000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
++ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 61>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <3>;
++ clocks = <&gateclk 8>;
++ status = "disabled";
++ };
++
++ pcie@9,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
++ reg = <0x4800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
++ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 99>;
++ marvell,pcie-port = <2>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 26>;
++ status = "disabled";
++ };
++ };
++
+ internal-regs {
+ pinctrl {
+ compatible = "marvell,mv78230-pinctrl";
+@@ -79,108 +197,6 @@
+ };
+
+ /*
+- * MV78230 has 2 PCIe units Gen2.0: One unit can be
+- * configured as x4 or quad x1 lanes. One unit is
+- * x1 only.
+- */
+- pcie-controller {
+- compatible = "marvell,armada-xp-pcie";
+- status = "disabled";
+- device_type = "pci";
+-
+-#address-cells = <3>;
+-#size-cells = <2>;
+-
+- bus-range = <0x00 0xff>;
+-
+- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
+- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+-
+- pcie@1,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+- reg = <0x0800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 58>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 5>;
+- status = "disabled";
+- };
+-
+- pcie@2,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+- reg = <0x1000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 59>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <1>;
+- clocks = <&gateclk 6>;
+- status = "disabled";
+- };
+-
+- pcie@3,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+- reg = <0x1800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 60>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <2>;
+- clocks = <&gateclk 7>;
+- status = "disabled";
+- };
+-
+- pcie@4,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+- reg = <0x2000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 61>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <3>;
+- clocks = <&gateclk 8>;
+- status = "disabled";
+- };
+-
+- pcie@5,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+- reg = <0x2800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 62>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 9>;
+- status = "disabled";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-mv78260.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78260.dtsi
+@@ -45,6 +45,145 @@
+ };
+
+ soc {
++ /*
++ * MV78260 has 3 PCIe units Gen2.0: Two units can be
++ * configured as x4 or quad x1 lanes. One unit is
++ * x4/x1.
++ */
++ pcie-controller {
++ compatible = "marvell,armada-xp-pcie";
++ status = "disabled";
++ device_type = "pci";
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bus-range = <0x00 0xff>;
++
++ ranges =
++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
++ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
++ 0x82000000 0x9 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
++ 0x81000000 0x9 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
++ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
++ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
++
++ pcie@1,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
++ reg = <0x0800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
++ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 58>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 5>;
++ status = "disabled";
++ };
++
++ pcie@2,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
++ reg = <0x1000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
++ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 59>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <1>;
++ clocks = <&gateclk 6>;
++ status = "disabled";
++ };
++
++ pcie@3,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
++ reg = <0x1800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
++ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 60>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <2>;
++ clocks = <&gateclk 7>;
++ status = "disabled";
++ };
++
++ pcie@4,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
++ reg = <0x2000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
++ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 61>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <3>;
++ clocks = <&gateclk 8>;
++ status = "disabled";
++ };
++
++ pcie@9,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
++ reg = <0x4800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
++ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 99>;
++ marvell,pcie-port = <2>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 26>;
++ status = "disabled";
++ };
++
++ pcie@10,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x82000 0 0x2000>;
++ reg = <0x5000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
++ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 103>;
++ marvell,pcie-port = <3>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 27>;
++ status = "disabled";
++ };
++ };
++
+ internal-regs {
+ pinctrl {
+ compatible = "marvell,mv78260-pinctrl";
+@@ -98,177 +237,6 @@
+ status = "disabled";
+ };
+
+- /*
+- * MV78260 has 3 PCIe units Gen2.0: Two units can be
+- * configured as x4 or quad x1 lanes. One unit is
+- * x4 only.
+- */
+- pcie-controller {
+- compatible = "marvell,armada-xp-pcie";
+- status = "disabled";
+- device_type = "pci";
+-
+- #address-cells = <3>;
+- #size-cells = <2>;
+-
+- bus-range = <0x00 0xff>;
+-
+- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
+- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
+- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
+- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
+- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
+- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+-
+- pcie@1,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+- reg = <0x0800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 58>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 5>;
+- status = "disabled";
+- };
+-
+- pcie@2,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x44000 0 0x2000>;
+- reg = <0x1000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 59>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <1>;
+- clocks = <&gateclk 6>;
+- status = "disabled";
+- };
+-
+- pcie@3,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x48000 0 0x2000>;
+- reg = <0x1800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 60>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <2>;
+- clocks = <&gateclk 7>;
+- status = "disabled";
+- };
+-
+- pcie@4,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x4c000 0 0x2000>;
+- reg = <0x2000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 61>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <3>;
+- clocks = <&gateclk 8>;
+- status = "disabled";
+- };
+-
+- pcie@5,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x80000 0 0x2000>;
+- reg = <0x2800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 62>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 9>;
+- status = "disabled";
+- };
+-
+- pcie@6,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x84000 0 0x2000>;
+- reg = <0x3000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 63>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <1>;
+- clocks = <&gateclk 10>;
+- status = "disabled";
+- };
+-
+- pcie@7,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x88000 0 0x2000>;
+- reg = <0x3800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 64>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <2>;
+- clocks = <&gateclk 11>;
+- status = "disabled";
+- };
+-
+- pcie@8,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x8c000 0 0x2000>;
+- reg = <0x4000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 65>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <3>;
+- clocks = <&gateclk 12>;
+- status = "disabled";
+- };
+-
+- pcie@9,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x42000 0 0x2000>;
+- reg = <0x4800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 99>;
+- marvell,pcie-port = <2>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 26>;
+- status = "disabled";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-mv78460.dtsi
++++ b/arch/arm/boot/dts/armada-xp-mv78460.dtsi
+@@ -60,6 +60,227 @@
+ };
+
+ soc {
++ /*
++ * MV78460 has 4 PCIe units Gen2.0: Two units can be
++ * configured as x4 or quad x1 lanes. Two units are
++ * x4/x1.
++ */
++ pcie-controller {
++ compatible = "marvell,armada-xp-pcie";
++ status = "disabled";
++ device_type = "pci";
++
++ #address-cells = <3>;
++ #size-cells = <2>;
++
++ bus-range = <0x00 0xff>;
++
++ ranges =
++ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
++ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
++ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
++ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
++ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
++ 0x82000000 0 0x80000 MBUS_ID(0xf0, 0x01) 0x80000 0 0x00002000 /* Port 1.0 registers */
++ 0x82000000 0 0x82000 MBUS_ID(0xf0, 0x01) 0x82000 0 0x00002000 /* Port 3.0 registers */
++ 0x82000000 0 0x84000 MBUS_ID(0xf0, 0x01) 0x84000 0 0x00002000 /* Port 1.1 registers */
++ 0x82000000 0 0x88000 MBUS_ID(0xf0, 0x01) 0x88000 0 0x00002000 /* Port 1.2 registers */
++ 0x82000000 0 0x8c000 MBUS_ID(0xf0, 0x01) 0x8c000 0 0x00002000 /* Port 1.3 registers */
++ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */
++ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */
++ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 0.1 MEM */
++ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 0.1 IO */
++ 0x82000000 0x3 0 MBUS_ID(0x04, 0xb8) 0 1 0 /* Port 0.2 MEM */
++ 0x81000000 0x3 0 MBUS_ID(0x04, 0xb0) 0 1 0 /* Port 0.2 IO */
++ 0x82000000 0x4 0 MBUS_ID(0x04, 0x78) 0 1 0 /* Port 0.3 MEM */
++ 0x81000000 0x4 0 MBUS_ID(0x04, 0x70) 0 1 0 /* Port 0.3 IO */
++
++ 0x82000000 0x5 0 MBUS_ID(0x08, 0xe8) 0 1 0 /* Port 1.0 MEM */
++ 0x81000000 0x5 0 MBUS_ID(0x08, 0xe0) 0 1 0 /* Port 1.0 IO */
++ 0x82000000 0x6 0 MBUS_ID(0x08, 0xd8) 0 1 0 /* Port 1.1 MEM */
++ 0x81000000 0x6 0 MBUS_ID(0x08, 0xd0) 0 1 0 /* Port 1.1 IO */
++ 0x82000000 0x7 0 MBUS_ID(0x08, 0xb8) 0 1 0 /* Port 1.2 MEM */
++ 0x81000000 0x7 0 MBUS_ID(0x08, 0xb0) 0 1 0 /* Port 1.2 IO */
++ 0x82000000 0x8 0 MBUS_ID(0x08, 0x78) 0 1 0 /* Port 1.3 MEM */
++ 0x81000000 0x8 0 MBUS_ID(0x08, 0x70) 0 1 0 /* Port 1.3 IO */
++
++ 0x82000000 0x9 0 MBUS_ID(0x04, 0xf8) 0 1 0 /* Port 2.0 MEM */
++ 0x81000000 0x9 0 MBUS_ID(0x04, 0xf0) 0 1 0 /* Port 2.0 IO */
++
++ 0x82000000 0xa 0 MBUS_ID(0x08, 0xf8) 0 1 0 /* Port 3.0 MEM */
++ 0x81000000 0xa 0 MBUS_ID(0x08, 0xf0) 0 1 0 /* Port 3.0 IO */>;
++
++ pcie@1,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
++ reg = <0x0800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0
++ 0x81000000 0 0 0x81000000 0x1 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 58>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 5>;
++ status = "disabled";
++ };
++
++ pcie@2,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
++ reg = <0x1000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x2 0 1 0
++ 0x81000000 0 0 0x81000000 0x2 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 59>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <1>;
++ clocks = <&gateclk 6>;
++ status = "disabled";
++ };
++
++ pcie@3,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
++ reg = <0x1800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x3 0 1 0
++ 0x81000000 0 0 0x81000000 0x3 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 60>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <2>;
++ clocks = <&gateclk 7>;
++ status = "disabled";
++ };
++
++ pcie@4,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
++ reg = <0x2000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x4 0 1 0
++ 0x81000000 0 0 0x81000000 0x4 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 61>;
++ marvell,pcie-port = <0>;
++ marvell,pcie-lane = <3>;
++ clocks = <&gateclk 8>;
++ status = "disabled";
++ };
++
++ pcie@5,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
++ reg = <0x2800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x5 0 1 0
++ 0x81000000 0 0 0x81000000 0x5 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 62>;
++ marvell,pcie-port = <1>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 9>;
++ status = "disabled";
++ };
++
++ pcie@6,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
++ reg = <0x3000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x6 0 1 0
++ 0x81000000 0 0 0x81000000 0x6 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 63>;
++ marvell,pcie-port = <1>;
++ marvell,pcie-lane = <1>;
++ clocks = <&gateclk 10>;
++ status = "disabled";
++ };
++
++ pcie@7,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
++ reg = <0x3800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x7 0 1 0
++ 0x81000000 0 0 0x81000000 0x7 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 64>;
++ marvell,pcie-port = <1>;
++ marvell,pcie-lane = <2>;
++ clocks = <&gateclk 11>;
++ status = "disabled";
++ };
++
++ pcie@8,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
++ reg = <0x4000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x8 0 1 0
++ 0x81000000 0 0 0x81000000 0x8 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 65>;
++ marvell,pcie-port = <1>;
++ marvell,pcie-lane = <3>;
++ clocks = <&gateclk 12>;
++ status = "disabled";
++ };
++
++ pcie@9,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
++ reg = <0x4800 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0x9 0 1 0
++ 0x81000000 0 0 0x81000000 0x9 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 99>;
++ marvell,pcie-port = <2>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 26>;
++ status = "disabled";
++ };
++
++ pcie@10,0 {
++ device_type = "pci";
++ assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
++ reg = <0x5000 0 0 0 0>;
++ #address-cells = <3>;
++ #size-cells = <2>;
++ #interrupt-cells = <1>;
++ ranges = <0x82000000 0 0 0x82000000 0xa 0 1 0
++ 0x81000000 0 0 0x81000000 0xa 0 1 0>;
++ interrupt-map-mask = <0 0 0 0>;
++ interrupt-map = <0 0 0 0 &mpic 103>;
++ marvell,pcie-port = <3>;
++ marvell,pcie-lane = <0>;
++ clocks = <&gateclk 27>;
++ status = "disabled";
++ };
++ };
++
+ internal-regs {
+ pinctrl {
+ compatible = "marvell,mv78460-pinctrl";
+@@ -112,194 +333,6 @@
+ clocks = <&gateclk 1>;
+ status = "disabled";
+ };
+-
+- /*
+- * MV78460 has 4 PCIe units Gen2.0: Two units can be
+- * configured as x4 or quad x1 lanes. Two units are
+- * x4/x1.
+- */
+- pcie-controller {
+- compatible = "marvell,armada-xp-pcie";
+- status = "disabled";
+- device_type = "pci";
+-
+- #address-cells = <3>;
+- #size-cells = <2>;
+-
+- bus-range = <0x00 0xff>;
+-
+- ranges = <0x82000000 0 0x40000 0x40000 0 0x00002000 /* Port 0.0 registers */
+- 0x82000000 0 0x42000 0x42000 0 0x00002000 /* Port 2.0 registers */
+- 0x82000000 0 0x44000 0x44000 0 0x00002000 /* Port 0.1 registers */
+- 0x82000000 0 0x48000 0x48000 0 0x00002000 /* Port 0.2 registers */
+- 0x82000000 0 0x4c000 0x4c000 0 0x00002000 /* Port 0.3 registers */
+- 0x82000000 0 0x80000 0x80000 0 0x00002000 /* Port 1.0 registers */
+- 0x82000000 0 0x82000 0x82000 0 0x00002000 /* Port 3.0 registers */
+- 0x82000000 0 0x84000 0x84000 0 0x00002000 /* Port 1.1 registers */
+- 0x82000000 0 0x88000 0x88000 0 0x00002000 /* Port 1.2 registers */
+- 0x82000000 0 0x8c000 0x8c000 0 0x00002000 /* Port 1.3 registers */
+- 0x82000000 0 0xe0000000 0xe0000000 0 0x08000000 /* non-prefetchable memory */
+- 0x81000000 0 0 0xe8000000 0 0x00100000>; /* downstream I/O */
+-
+- pcie@1,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82000800 0 0x40000 0 0x2000>;
+- reg = <0x0800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 58>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 5>;
+- status = "disabled";
+- };
+-
+- pcie@2,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82001000 0 0x44000 0 0x2000>;
+- reg = <0x1000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 59>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <1>;
+- clocks = <&gateclk 6>;
+- status = "disabled";
+- };
+-
+- pcie@3,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82001800 0 0x48000 0 0x2000>;
+- reg = <0x1800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 60>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <2>;
+- clocks = <&gateclk 7>;
+- status = "disabled";
+- };
+-
+- pcie@4,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82002000 0 0x4c000 0 0x2000>;
+- reg = <0x2000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 61>;
+- marvell,pcie-port = <0>;
+- marvell,pcie-lane = <3>;
+- clocks = <&gateclk 8>;
+- status = "disabled";
+- };
+-
+- pcie@5,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82002800 0 0x80000 0 0x2000>;
+- reg = <0x2800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 62>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 9>;
+- status = "disabled";
+- };
+-
+- pcie@6,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82003000 0 0x84000 0 0x2000>;
+- reg = <0x3000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 63>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <1>;
+- clocks = <&gateclk 10>;
+- status = "disabled";
+- };
+-
+- pcie@7,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82003800 0 0x88000 0 0x2000>;
+- reg = <0x3800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 64>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <2>;
+- clocks = <&gateclk 11>;
+- status = "disabled";
+- };
+-
+- pcie@8,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82004000 0 0x8c000 0 0x2000>;
+- reg = <0x4000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 65>;
+- marvell,pcie-port = <1>;
+- marvell,pcie-lane = <3>;
+- clocks = <&gateclk 12>;
+- status = "disabled";
+- };
+- pcie@9,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82004800 0 0x42000 0 0x2000>;
+- reg = <0x4800 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 99>;
+- marvell,pcie-port = <2>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 26>;
+- status = "disabled";
+- };
+-
+- pcie@10,0 {
+- device_type = "pci";
+- assigned-addresses = <0x82005000 0 0x82000 0 0x2000>;
+- reg = <0x5000 0 0 0 0>;
+- #address-cells = <3>;
+- #size-cells = <2>;
+- #interrupt-cells = <1>;
+- ranges;
+- interrupt-map-mask = <0 0 0 0>;
+- interrupt-map = <0 0 0 0 &mpic 103>;
+- marvell,pcie-port = <3>;
+- marvell,pcie-lane = <0>;
+- clocks = <&gateclk 27>;
+- status = "disabled";
+- };
+- };
+ };
+ };
+ };
+--- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
++++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts
+@@ -59,6 +59,15 @@
+ };
+ };
+
++ pcie-controller {
++ status = "okay";
++ /* Internal mini-PCIe connector */
++ pcie@1,0 {
++ /* Port 0, Lane 0 */
++ status = "okay";
++ };
++ };
++
+ internal-regs {
+ serial@12000 {
+ clock-frequency = <250000000>;
+@@ -172,15 +181,6 @@
+ usb@51000 {
+ status = "okay";
+ };
+-
+- pcie-controller {
+- status = "okay";
+- /* Internal mini-PCIe connector */
+- pcie@1,0 {
+- /* Port 0, Lane 0 */
+- status = "okay";
+- };
+- };
+ };
+ };
+ };
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-08 10:26:02 +0000