diff options
Diffstat (limited to 'target/linux/ramips')
-rwxr-xr-x | target/linux/ramips/base-files/etc/diag.sh | 3 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/etc/uci-defaults/02_network | 1 | ||||
-rw-r--r-- | target/linux/ramips/base-files/lib/preinit/06_set_iface_mac | 1 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/lib/ramips.sh | 3 | ||||
-rwxr-xr-x | target/linux/ramips/base-files/lib/upgrade/platform.sh | 1 | ||||
-rw-r--r-- | target/linux/ramips/dts/IP2202.dts | 97 | ||||
-rw-r--r-- | target/linux/ramips/image/Makefile | 3 | ||||
-rw-r--r-- | target/linux/ramips/rt305x/profiles/poray.mk | 12 |
8 files changed, 121 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 689fee7104..6ecb13352c 100755 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -45,6 +45,9 @@ get_status_led() { fonera20n) status_led="fonera20n:green:power" ;; + ip2202) + status_led="ip2202:green:run" + ;; rt-n13u) status_led="rt-n13u:power" ;; diff --git a/target/linux/ramips/base-files/etc/uci-defaults/02_network b/target/linux/ramips/base-files/etc/uci-defaults/02_network index 2df7b0842b..ef13e364a5 100755 --- a/target/linux/ramips/base-files/etc/uci-defaults/02_network +++ b/target/linux/ramips/base-files/etc/uci-defaults/02_network @@ -173,6 +173,7 @@ ramips_setup_macs() broadway | \ dir-620-d1 | \ f5d8235-v1 | \ + ip2202 | \ mpr-a1 | \ mpr-a2 | \ mzk-w300nh2 | \ diff --git a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac index 6712154dc4..a0d9b6123b 100644 --- a/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac +++ b/target/linux/ramips/base-files/lib/preinit/06_set_iface_mac @@ -60,6 +60,7 @@ preinit_set_mac_address() { carambola |\ dir-615-h1 |\ fonera20n |\ + ip2202 |\ rt-n13u |\ hw550-3g |\ nbg-419n |\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 6960c6d401..858a8092e7 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -148,6 +148,9 @@ ramips_board_detect() { *"Planex MZK-W300NH2"*) name="mzk-w300nh2" ;; + *"Poray IP2202") + name="ip2202" + ;; *"Poray M3") name="m3" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index df3b32479d..e85beada39 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -44,6 +44,7 @@ platform_check_image() { freestation5 | \ hw550-3g | \ hg255d | \ + ip2202 | \ m3 | \ m4 | \ mofi3500-3gn | \ diff --git a/target/linux/ramips/dts/IP2202.dts b/target/linux/ramips/dts/IP2202.dts new file mode 100644 index 0000000000..ea9f1702e6 --- /dev/null +++ b/target/linux/ramips/dts/IP2202.dts @@ -0,0 +1,97 @@ +/dts-v1/; + +/include/ "rt3050.dtsi" + +/ { + compatible = "IP2202", "ralink,rt3052-soc"; + model = "Poray IP2202"; + + palmbus@10000000 { + sysc@0 { + ralink,pinmux = "i2c", "spi", "uartlite", "jtag", "sdram", "rgmii"; + ralink,gpiomux = "mdio"; + ralink,uartmux = "gpio"; + ralink,wdtmux = <1>; + }; + + gpio0: gpio@600 { + status = "okay"; + }; + + }; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x7b0000>; + }; + }; + + ethernet@10100000 { + status = "okay"; + }; + + esw@10110000 { + status = "okay"; + ralink,portmap = <0x2f>; + }; + + gpio-leds { + compatible = "gpio-leds"; + run { + label = "ip2202:green:run"; + gpios = <&gpio0 9 1>; + }; + net { + label = "ip2202:amber:net"; + gpios = <&gpio0 13 1>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + reset { + label = "reset"; + gpios = <&gpio0 10 1>; + linux,code = <0x198>; + }; + }; + + wmac@10180000 { + status = "okay"; + ralink,led-polarity = <0>; + }; + + otg@101c0000 { + status = "okay"; + }; +}; diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index 4bfcced46f..88954f13aa 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -374,6 +374,8 @@ Image/Build/Profile/RT-N13U=$(call BuildFirmware/Default8M/$(1),$(1),rt-n13u,RT- Image/Build/Profile/FREESTATION5=$(call BuildFirmware/Default8M/$(1),$(1),freestation5,FREESTATION5) +Image/Build/Profile/IP2202=$(call BuildFirmware/Default8M/$(1),$(1),ip2202,IP2202) + Image/Build/Profile/M3=$(call BuildFirmware/Poray4M/$(1),$(1),m3,M3) Image/Build/Profile/M4=$(call BuildFirmware/PorayDualSize/$(1),$(1),m4,M4) @@ -516,6 +518,7 @@ define Image/Build/Profile/Default $(call Image/Build/Profile/FREESTATION5,$(1)) # $(call Image/Build/Profile/HG255D,$(1)) $(call Image/Build/Profile/HW550-3G,$(1)) + $(call Image/Build/Profile/IP2202,$(1)) $(call Image/Build/Profile/M3,$(1)) $(call Image/Build/Profile/M4,$(1)) $(call Image/Build/Profile/MOFI3500-3GN,$(1)) diff --git a/target/linux/ramips/rt305x/profiles/poray.mk b/target/linux/ramips/rt305x/profiles/poray.mk index 8c1ed6194f..ed017b7d84 100644 --- a/target/linux/ramips/rt305x/profiles/poray.mk +++ b/target/linux/ramips/rt305x/profiles/poray.mk @@ -5,6 +5,18 @@ # See /LICENSE for more information. # +define Profile/IP2202 + NAME:=Poray IP2202 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-rt305x-dwc_otg \ + kmod-ledtrig-netdev kmod-ledtrig-timer restorefactory +endef + +define Profile/IP2202/Description + Package set for Poray IP2202 board +endef + +$(eval $(call Profile,IP2202)) + define Profile/M3 NAME:=Poray M3 PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-netdev kmod-ledtrig-timer |