diff options
Diffstat (limited to 'target/linux/ramips')
79 files changed, 14412 insertions, 7410 deletions
diff --git a/target/linux/ramips/dts/mt7621.dtsi b/target/linux/ramips/dts/mt7621.dtsi index 9fa9d0a5fa..83df878e9c 100644 --- a/target/linux/ramips/dts/mt7621.dtsi +++ b/target/linux/ramips/dts/mt7621.dtsi @@ -72,8 +72,8 @@ compatible = "ns16550a"; reg = <0xc00 0x100>; -/* interrupt-parent = <&gic>; - interrupts = <26>;*/ + interrupt-parent = <&gic>; + interrupts = <26>; reg-shift = <2>; reg-io-width = <4>; diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c deleted file mode 100644 index 4e9c0d7a8d..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.c +++ /dev/null @@ -1,445 +0,0 @@ -#include "mtk-phy.h" - -#ifdef CONFIG_PROJECT_7621 -#include "mtk-phy-7621.h" - -//not used on SoC -PHY_INT32 phy_init(struct u3phy_info *info){ - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ - return PHY_TRUE; -} - -//-------------------------------------------------------- -// Function : fgEyeScanHelper_CheckPtInRegion() -// Description : Check if the test point is in a rectangle region. -// If it is in the rectangle, also check if this point -// is on the multiple of deltaX and deltaY. -// Parameter : strucScanRegion * prEye - the region -// BYTE bX -// BYTE bY -// Return : BYTE - TRUE : This point needs to be tested -// FALSE: This point will be omitted -// Note : First check within the rectangle. -// Secondly, use modulous to check if the point will be tested. -//-------------------------------------------------------- -static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) -{ - PHY_INT8 fgValid = true; - - - /// Be careful, the axis origin is on the TOP-LEFT corner. - /// Therefore the top-left point has the minimum X and Y - /// Botton-right point is the maximum X and Y - if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) - && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) - { - // With the region, now check whether or not the input test point is - // on the multiples of X and Y - // Do not have to worry about negative value, because we have already - // check the input bX, and bY is within the region. - if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) - || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) - { - // if the division will have remainder, that means - // the input test point is on the multiples of X and Y - fgValid = false; - } - else - { - } - } - else - { - - fgValid = false; - } - return fgValid; -} - -//-------------------------------------------------------- -// Function : EyeScanHelper_RunTest() -// Description : Enable the test, and wait til it is completed -// Parameter : None -// Return : None -// Note : None -//-------------------------------------------------------- -static void EyeScanHelper_RunTest(struct u3phy_info *info) -{ - DRV_UDELAY(100); - // Disable the test - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 - DRV_UDELAY(100); - // Run the test - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 - DRV_UDELAY(100); - // Wait til it's done - //RGS_SSUSB_RX_EYE_CNT_RDY - while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) - , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); -} - -//-------------------------------------------------------- -// Function : fgEyeScanHelper_CalNextPoint() -// Description : Calcualte the test point for the measurement -// Parameter : None -// Return : BOOL - TRUE : the next point is within the -// boundaryof HW limit -// FALSE: the next point is out of the HW limit -// Note : The next point is obtained by calculating -// from the bottom left of the region rectangle -// and then scanning up until it reaches the upper -// limit. At this time, the x will increment, and -// start scanning downwards until the y hits the -// zero. -//-------------------------------------------------------- -static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) -{ - if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) - || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) - ) - { - /// Reaches the limit of Y axis - /// Increment X - _bXcurr++; - _fgXChged = true; - _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; - - if (_bXcurr > MAX_X) - { - return false; - } - } - else - { - _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; - _fgXChged = false; - } - return PHY_TRUE; -} - -PHY_INT32 eyescan_init(struct u3phy_info *info){ - //initial PHY setting - U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) - , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) - , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 - return PHY_TRUE; -} - -PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y - , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ - PHY_INT32 cOfst = 0; - PHY_UINT8 bIdxX = 0; - PHY_UINT8 bIdxY = 0; - //PHY_INT8 bCnt = 0; - PHY_UINT8 bIdxCycCnt = 0; - PHY_INT8 fgValid; - PHY_INT8 cX; - PHY_INT8 cY; - PHY_UINT8 bExtendCnt; - PHY_INT8 isContinue; - //PHY_INT8 isBreak; - PHY_UINT32 wErr0 = 0, wErr1 = 0; - //PHY_UINT32 temp; - - PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; - PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; - - _rEye1.bX_tl = x_t1; - _rEye1.bY_tl = y_t1; - _rEye1.bX_br = x_br; - _rEye1.bY_br = y_br; - _rEye1.bDeltaX = delta_x; - _rEye1.bDeltaY = delta_y; - - _rEye2.bX_tl = x_t1; - _rEye2.bY_tl = y_t1; - _rEye2.bX_br = x_br; - _rEye2.bY_br = y_br; - _rEye2.bDeltaX = delta_x; - _rEye2.bDeltaY = delta_y; - - _rTestCycle.wEyeCnt = eye_cnt; - _rTestCycle.bNumOfEyeCnt = num_cnt; - _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; - _rTestCycle.bPICalEn = PI_cal_en; - - _bXcurr = 0; - _bYcurr = 0; - _eScanDir = SCAN_DN; - _fgXChged = false; - - printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ - eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ - x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); - - //force SIGDET to OFF - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) - , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 - - // RX_TRI_DET_EN to Disable - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) - , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 - - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 - - - if (PI_cal_en){ - // PI Calibration - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 - - DRV_UDELAY(20); - - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) - , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 - _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) - , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO - - printk(KERN_ERR "PI result: %d\n", _bPIResult); - } - // Read Initial DAC - // Set CYCLE - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) - ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT - - // Eye Monitor Feature - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) - , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 - - // Move X,Y to the top-left corner - for (cOfst = 0; cOfst >= -64; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET - } - for (cOfst = 0; cOfst < 64; cOfst++) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y - } - //ClearErrorResult - for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ - for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) - { - for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ - pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; - pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; - } - } - } - isContinue = true; - while(isContinue){ - //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); - // The point is within the boundary, then let's check if it is within - // the testing region. - // The point is only test-able if one of the eye region - // includes this point. - fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) - || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); - // Translate bX and bY to 2's complement from where the origin was on the - // top left corner. - // 0x40 and 0x3F needs a bit of thinking!!!! >"< - cX = (_bXcurr ^ 0x40); - cY = (_bYcurr ^ 0x3F); - - // Set X if necessary - if (_fgXChged == true) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET - } - // Set Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y - - /// Test this point! - if (fgValid){ - for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) - { - //run test - EyeScanHelper_RunTest(info); - } - for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) - { - EyeScanHelper_RunTest(info); - wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) - , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); - wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) - , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); - - pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; - pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; - - //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); -// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" -// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); - } - //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); - } - else{ - - } - if (fgEyeScanHelper_CalNextPoint() == false){ -#if 0 - printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); - printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); -#endif - printk(KERN_ERR "end of eye scan\n"); - isContinue = false; - } - } - printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); - - // Move X,Y to the top-left corner - for (cOfst = 63; cOfst >= 0; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET - } - for (cOfst = 63; cOfst >= 0; cOfst--) - { - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); - U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) - , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); - - } - printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) - , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); - - printk(KERN_ERR "PI result: %d\n", _bPIResult); - printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); - printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); - - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ - return PHY_TRUE; -} - -//not used on SoC -PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ - return PHY_TRUE; -} - -PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ - PHY_INT32 i=0; - //PHY_INT32 j=0; - //PHY_INT8 u1SrCalVal = 0; - //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; - PHY_INT32 fgRet = 0; - PHY_INT32 u4FmOut = 0; - PHY_INT32 u4Tmp = 0; - //PHY_INT32 temp; - - // => RG_USB20_HSTX_SRCAL_EN = 1 - // enable HS TX SR calibration - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); - DRV_MSLEEP(1); - - // => RG_FRCK_EN = 1 - // Enable free run clock - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) - , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); - - // MT6290 HS signal quality patch - // => RG_CYCLECNT = 400 - // Setting cyclecnt =400 - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); - - // => RG_FREQDET_EN = 1 - // Enable frequency meter - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); - - // wait for FM detection done, set 10ms timeout - for(i=0; i<10; i++){ - // => u4FmOut = USB_FM_OUT - // read FM_OUT - u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); - printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); - - // check if FM detection done - if (u4FmOut != 0) - { - fgRet = 0; - printk("FM detection done! loop = %d\n", i); - - break; - } - - fgRet = 1; - DRV_MSLEEP(1); - } - // => RG_FREQDET_EN = 0 - // disable frequency meter - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) - , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); - - // => RG_FRCK_EN = 0 - // disable free run clock - U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) - , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); - - // => RG_USB20_HSTX_SRCAL_EN = 0 - // disable HS TX SR calibration - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); - DRV_MSLEEP(1); - - if(u4FmOut == 0){ - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); - - fgRet = 1; - } - else{ - // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) - u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; - printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); - U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) - , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); - } - return fgRet; -} - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h deleted file mode 100644 index 41b0c7744b..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-7621.h +++ /dev/null @@ -1,2871 +0,0 @@ -#ifdef CONFIG_PROJECT_7621 -#ifndef __MTK_PHY_7621_H -#define __MTK_PHY_7621_H - -#define U2_SR_COEF_7621 28 - -/////////////////////////////////////////////////////////////////////////////// - -struct u2phy_reg { - //0x0 - PHY_LE32 u2phyac0; - PHY_LE32 u2phyac1; - PHY_LE32 u2phyac2; - PHY_LE32 reserve0; - //0x10 - PHY_LE32 u2phyacr0; - PHY_LE32 u2phyacr1; - PHY_LE32 u2phyacr2; - PHY_LE32 u2phyacr3; - //0x20 - PHY_LE32 u2phyacr4; - PHY_LE32 u2phyamon0; - PHY_LE32 reserve1[2]; - //0x30~0x50 - PHY_LE32 reserve2[12]; - //0x60 - PHY_LE32 u2phydcr0; - PHY_LE32 u2phydcr1; - PHY_LE32 u2phydtm0; - PHY_LE32 u2phydtm1; - //0x70 - PHY_LE32 u2phydmon0; - PHY_LE32 u2phydmon1; - PHY_LE32 u2phydmon2; - PHY_LE32 u2phydmon3; - //0x80 - PHY_LE32 u2phybc12c; - PHY_LE32 u2phybc12c1; - PHY_LE32 reserve3[2]; - //0x90~0xe0 - PHY_LE32 reserve4[24]; - //0xf0 - PHY_LE32 reserve6[3]; - PHY_LE32 regfcom; -}; - -//U3D_U2PHYAC0 -#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 -#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 -#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 -#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 -#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 -#define RG_USB20_REF_EN (0x1<<15) //15:15 -#define RG_USB20_INTR_EN (0x1<<14) //14:14 -#define RG_USB20_BG_TRIM (0xf<<8) //11:8 -#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 -#define RG_USB20_BG_RASEL (0x3<<4) //5:4 -#define RG_USB20_BGR_DIV (0x3<<2) //3:2 -#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 -#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 - -//U3D_U2PHYAC1 -#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 -#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 -#define RG_USB20_MPX_SEL (0xff<<16) //23:16 -#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 -#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 -#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 -#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 -#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 -#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 - -//U3D_U2PHYAC2 -#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 -#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 -#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 - -//U3D_U2PHYACR0 -#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 -#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 -#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 -#define RG_USB20_LS_CR (0x7<<12) //14:12 -#define RG_USB20_FS_CR (0x7<<8) //10:8 -#define RG_USB20_LS_SR (0x7<<4) //6:4 -#define RG_USB20_FS_SR (0x7<<0) //2:0 - -//U3D_U2PHYACR1 -#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 -#define RG_USB20_SQD (0x3<<24) //25:24 -#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 -#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 -#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 -#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 -#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 -#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 -#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 -#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 -#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 - -//U3D_U2PHYACR2 -#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 -#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 -#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 -#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 -#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 -#define RG_USB20_DISCD (0x3<<20) //21:20 -#define RG_USB20_DISCTH (0xf<<16) //19:16 -#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 -#define RG_USB20_SQCAL (0xf<<8) //11:8 -#define RG_USB20_SQTH (0xf<<0) //3:0 - -//U3D_U2PHYACR3 -#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 -#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 -#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 -#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 -#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 -#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 -#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 -#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 -#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 -#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 -#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 -#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 -#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 -#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 -#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 -#define RG_USB20_PHY_REV (0xff<<0) //7:0 - -//U3D_U2PHYACR4 -#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 -#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 -#define USB20_DP_100K_EN (0x1<<16) //16:16 -#define USB20_GPIO_DM_I (0x1<<15) //15:15 -#define USB20_GPIO_DP_I (0x1<<14) //14:14 -#define USB20_GPIO_DM_OE (0x1<<13) //13:13 -#define USB20_GPIO_DP_OE (0x1<<12) //12:12 -#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 -#define USB20_GPIO_MODE (0x1<<8) //8:8 -#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 -#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 -#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 -#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 - -//U3D_U2PHYAMON0 -#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 -#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 - -//U3D_U2PHYDCR0 -#define RG_USB20_CDR_TST (0x3<<30) //31:30 -#define RG_USB20_GATED_ENB (0x1<<29) //29:29 -#define RG_USB20_TESTMODE (0x3<<26) //27:26 -#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 -#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 -#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 -#define RG_USB20_EBTHRLD (0x1<<7) //7:7 -#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 -#define RG_USB20_TX_TST (0x1<<5) //5:5 -#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 -#define RG_USB20_CDR_FILT (0xf<<0) //3:0 - -//U3D_U2PHYDCR1 -#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 -#define RG_USB20_DRVVBUS (0x1<<23) //23:23 -#define RG_DEBUG_EN (0x1<<22) //22:22 -#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 -#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 -#define RG_USB20_BERTH (0x3<<16) //17:16 -#define RG_USB20_LBMODE (0x3<<13) //14:13 -#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 -#define RG_USB20_TAPSEL (0xfff<<0) //11:0 - -//U3D_U2PHYDTM0 -#define RG_UART_MODE (0x3<<30) //31:30 -#define FORCE_UART_I (0x1<<29) //29:29 -#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 -#define FORCE_UART_TX_OE (0x1<<27) //27:27 -#define FORCE_UART_EN (0x1<<26) //26:26 -#define FORCE_USB_CLKEN (0x1<<25) //25:25 -#define FORCE_DRVVBUS (0x1<<24) //24:24 -#define FORCE_DATAIN (0x1<<23) //23:23 -#define FORCE_TXVALID (0x1<<22) //22:22 -#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 -#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 -#define FORCE_XCVRSEL (0x1<<19) //19:19 -#define FORCE_SUSPENDM (0x1<<18) //18:18 -#define FORCE_TERMSEL (0x1<<17) //17:17 -#define FORCE_OPMODE (0x1<<16) //16:16 -#define UTMI_MUXSEL (0x1<<15) //15:15 -#define RG_RESET (0x1<<14) //14:14 -#define RG_DATAIN (0xf<<10) //13:10 -#define RG_TXVALIDH (0x1<<9) //9:9 -#define RG_TXVALID (0x1<<8) //8:8 -#define RG_DMPULLDOWN (0x1<<7) //7:7 -#define RG_DPPULLDOWN (0x1<<6) //6:6 -#define RG_XCVRSEL (0x3<<4) //5:4 -#define RG_SUSPENDM (0x1<<3) //3:3 -#define RG_TERMSEL (0x1<<2) //2:2 -#define RG_OPMODE (0x3<<0) //1:0 - -//U3D_U2PHYDTM1 -#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 -#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 -#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 -#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 -#define RG_UART_I (0x1<<19) //19:19 -#define RG_UART_BIAS_EN (0x1<<18) //18:18 -#define RG_UART_TX_OE (0x1<<17) //17:17 -#define RG_UART_EN (0x1<<16) //16:16 -#define FORCE_VBUSVALID (0x1<<13) //13:13 -#define FORCE_SESSEND (0x1<<12) //12:12 -#define FORCE_BVALID (0x1<<11) //11:11 -#define FORCE_AVALID (0x1<<10) //10:10 -#define FORCE_IDDIG (0x1<<9) //9:9 -#define FORCE_IDPULLUP (0x1<<8) //8:8 -#define RG_VBUSVALID (0x1<<5) //5:5 -#define RG_SESSEND (0x1<<4) //4:4 -#define RG_BVALID (0x1<<3) //3:3 -#define RG_AVALID (0x1<<2) //2:2 -#define RG_IDDIG (0x1<<1) //1:1 -#define RG_IDPULLUP (0x1<<0) //0:0 - -//U3D_U2PHYDMON0 -#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 - -//U3D_U2PHYDMON1 -#define USB20_UART_O (0x1<<31) //31:31 -#define RGO_USB20_LB_PASS (0x1<<30) //30:30 -#define RGO_USB20_LB_DONE (0x1<<29) //29:29 -#define AD_USB20_BVALID (0x1<<28) //28:28 -#define USB20_IDDIG (0x1<<27) //27:27 -#define AD_USB20_VBUSVALID (0x1<<26) //26:26 -#define AD_USB20_SESSEND (0x1<<25) //25:25 -#define AD_USB20_AVALID (0x1<<24) //24:24 -#define USB20_LINE_STATE (0x3<<22) //23:22 -#define USB20_HST_DISCON (0x1<<21) //21:21 -#define USB20_TX_READY (0x1<<20) //20:20 -#define USB20_RX_ERROR (0x1<<19) //19:19 -#define USB20_RX_ACTIVE (0x1<<18) //18:18 -#define USB20_RX_VALIDH (0x1<<17) //17:17 -#define USB20_RX_VALID (0x1<<16) //16:16 -#define USB20_DATA_OUT (0xffff<<0) //15:0 - -//U3D_U2PHYDMON2 -#define RGO_TXVALID_CNT (0xff<<24) //31:24 -#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 -#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 -#define USB20_PROBE_OUT (0xff<<0) //7:0 - -//U3D_U2PHYDMON3 -#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 -#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 -#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 -#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 -#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 - -//U3D_U2PHYBC12C -#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 -#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 -#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 -#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 -#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 -#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 -#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 -#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 -#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 -#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 -#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 -#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 -#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 -#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 -#define RG_CHGDT_EN (0x1<<0) //0:0 - -//U3D_U2PHYBC12C1 -#define RG_CHGDT_REV (0xff<<0) //7:0 - -//U3D_REGFCOM -#define RG_PAGE (0xff<<24) //31:24 -#define I2C_MODE (0x1<<16) //16:16 - - -/* OFFSET */ - -//U3D_U2PHYAC0 -#define RG_USB20_USBPLL_DIVEN_OFST (28) -#define RG_USB20_USBPLL_CKCTRL_OFST (26) -#define RG_USB20_USBPLL_PREDIV_OFST (24) -#define RG_USB20_USBPLL_FORCE_ON_OFST (23) -#define RG_USB20_USBPLL_FBDIV_OFST (16) -#define RG_USB20_REF_EN_OFST (15) -#define RG_USB20_INTR_EN_OFST (14) -#define RG_USB20_BG_TRIM_OFST (8) -#define RG_USB20_BG_RBSEL_OFST (6) -#define RG_USB20_BG_RASEL_OFST (4) -#define RG_USB20_BGR_DIV_OFST (2) -#define RG_SIFSLV_CHP_EN_OFST (1) -#define RG_SIFSLV_BGR_EN_OFST (0) - -//U3D_U2PHYAC1 -#define RG_USB20_VRT_VREF_SEL_OFST (28) -#define RG_USB20_TERM_VREF_SEL_OFST (24) -#define RG_USB20_MPX_SEL_OFST (16) -#define RG_USB20_MPX_OUT_SEL_OFST (12) -#define RG_USB20_TX_PH_ROT_SEL_OFST (8) -#define RG_USB20_USBPLL_ACCEN_OFST (3) -#define RG_USB20_USBPLL_LF_OFST (2) -#define RG_USB20_USBPLL_BR_OFST (1) -#define RG_USB20_USBPLL_BP_OFST (0) - -//U3D_U2PHYAC2 -#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) -#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) -#define RG_USB20_CLKREF_REV_OFST (0) - -//U3D_U2PHYACR0 -#define RG_USB20_ICUSB_EN_OFST (24) -#define RG_USB20_HSTX_SRCAL_EN_OFST (23) -#define RG_USB20_HSTX_SRCTRL_OFST (16) -#define RG_USB20_LS_CR_OFST (12) -#define RG_USB20_FS_CR_OFST (8) -#define RG_USB20_LS_SR_OFST (4) -#define RG_USB20_FS_SR_OFST (0) - -//U3D_U2PHYACR1 -#define RG_USB20_INIT_SQ_EN_DG_OFST (28) -#define RG_USB20_SQD_OFST (24) -#define RG_USB20_HSTX_TMODE_SEL_OFST (20) -#define RG_USB20_HSTX_TMODE_EN_OFST (19) -#define RG_USB20_PHYD_MONEN_OFST (18) -#define RG_USB20_INLPBK_EN_OFST (17) -#define RG_USB20_CHIRP_EN_OFST (16) -#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) -#define RG_USB20_DM_ABIST_SELE_OFST (8) -#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) -#define RG_USB20_DP_ABIST_SELE_OFST (0) - -//U3D_U2PHYACR2 -#define RG_USB20_OTG_ABIST_SELE_OFST (29) -#define RG_USB20_OTG_ABIST_EN_OFST (28) -#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) -#define RG_USB20_OTG_VBUSTH_OFST (24) -#define RG_USB20_DISC_FIT_EN_OFST (22) -#define RG_USB20_DISCD_OFST (20) -#define RG_USB20_DISCTH_OFST (16) -#define RG_USB20_SQCAL_EN_OFST (15) -#define RG_USB20_SQCAL_OFST (8) -#define RG_USB20_SQTH_OFST (0) - -//U3D_U2PHYACR3 -#define RG_USB20_HSTX_DBIST_OFST (28) -#define RG_USB20_HSTX_BIST_EN_OFST (26) -#define RG_USB20_HSTX_I_EN_MODE_OFST (24) -#define RG_USB20_HSRX_TMODE_EN_OFST (23) -#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) -#define RG_USB20_USB11_TMODE_EN_OFST (19) -#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) -#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) -#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) -#define RG_USB20_HS_TERM_EN_MODE_OFST (13) -#define RG_USB20_PUPD_BIST_EN_OFST (12) -#define RG_USB20_EN_PU_DM_OFST (11) -#define RG_USB20_EN_PD_DM_OFST (10) -#define RG_USB20_EN_PU_DP_OFST (9) -#define RG_USB20_EN_PD_DP_OFST (8) -#define RG_USB20_PHY_REV_OFST (0) - -//U3D_U2PHYACR4 -#define RG_USB20_DP_100K_MODE_OFST (18) -#define RG_USB20_DM_100K_EN_OFST (17) -#define USB20_DP_100K_EN_OFST (16) -#define USB20_GPIO_DM_I_OFST (15) -#define USB20_GPIO_DP_I_OFST (14) -#define USB20_GPIO_DM_OE_OFST (13) -#define USB20_GPIO_DP_OE_OFST (12) -#define RG_USB20_GPIO_CTL_OFST (9) -#define USB20_GPIO_MODE_OFST (8) -#define RG_USB20_TX_BIAS_EN_OFST (5) -#define RG_USB20_TX_VCMPDN_EN_OFST (4) -#define RG_USB20_HS_SQ_EN_MODE_OFST (2) -#define RG_USB20_HS_RCV_EN_MODE_OFST (0) - -//U3D_U2PHYAMON0 -#define RGO_USB20_GPIO_DM_O_OFST (1) -#define RGO_USB20_GPIO_DP_O_OFST (0) - -//U3D_U2PHYDCR0 -#define RG_USB20_CDR_TST_OFST (30) -#define RG_USB20_GATED_ENB_OFST (29) -#define RG_USB20_TESTMODE_OFST (26) -#define RG_USB20_PLL_STABLE_OFST (25) -#define RG_USB20_PLL_FORCE_ON_OFST (24) -#define RG_USB20_PHYD_RESERVE_OFST (8) -#define RG_USB20_EBTHRLD_OFST (7) -#define RG_USB20_EARLY_HSTX_I_OFST (6) -#define RG_USB20_TX_TST_OFST (5) -#define RG_USB20_NEGEDGE_ENB_OFST (4) -#define RG_USB20_CDR_FILT_OFST (0) - -//U3D_U2PHYDCR1 -#define RG_USB20_PROBE_SEL_OFST (24) -#define RG_USB20_DRVVBUS_OFST (23) -#define RG_DEBUG_EN_OFST (22) -#define RG_USB20_OTG_PROBE_OFST (20) -#define RG_USB20_SW_PLLMODE_OFST (18) -#define RG_USB20_BERTH_OFST (16) -#define RG_USB20_LBMODE_OFST (13) -#define RG_USB20_FORCE_TAP_OFST (12) -#define RG_USB20_TAPSEL_OFST (0) - -//U3D_U2PHYDTM0 -#define RG_UART_MODE_OFST (30) -#define FORCE_UART_I_OFST (29) -#define FORCE_UART_BIAS_EN_OFST (28) -#define FORCE_UART_TX_OE_OFST (27) -#define FORCE_UART_EN_OFST (26) -#define FORCE_USB_CLKEN_OFST (25) -#define FORCE_DRVVBUS_OFST (24) -#define FORCE_DATAIN_OFST (23) -#define FORCE_TXVALID_OFST (22) -#define FORCE_DM_PULLDOWN_OFST (21) -#define FORCE_DP_PULLDOWN_OFST (20) -#define FORCE_XCVRSEL_OFST (19) -#define FORCE_SUSPENDM_OFST (18) -#define FORCE_TERMSEL_OFST (17) -#define FORCE_OPMODE_OFST (16) -#define UTMI_MUXSEL_OFST (15) -#define RG_RESET_OFST (14) -#define RG_DATAIN_OFST (10) -#define RG_TXVALIDH_OFST (9) -#define RG_TXVALID_OFST (8) -#define RG_DMPULLDOWN_OFST (7) -#define RG_DPPULLDOWN_OFST (6) -#define RG_XCVRSEL_OFST (4) -#define RG_SUSPENDM_OFST (3) -#define RG_TERMSEL_OFST (2) -#define RG_OPMODE_OFST (0) - -//U3D_U2PHYDTM1 -#define RG_USB20_PRBS7_EN_OFST (31) -#define RG_USB20_PRBS7_BITCNT_OFST (24) -#define RG_USB20_CLK48M_EN_OFST (23) -#define RG_USB20_CLK60M_EN_OFST (22) -#define RG_UART_I_OFST (19) -#define RG_UART_BIAS_EN_OFST (18) -#define RG_UART_TX_OE_OFST (17) -#define RG_UART_EN_OFST (16) -#define FORCE_VBUSVALID_OFST (13) -#define FORCE_SESSEND_OFST (12) -#define FORCE_BVALID_OFST (11) -#define FORCE_AVALID_OFST (10) -#define FORCE_IDDIG_OFST (9) -#define FORCE_IDPULLUP_OFST (8) -#define RG_VBUSVALID_OFST (5) -#define RG_SESSEND_OFST (4) -#define RG_BVALID_OFST (3) -#define RG_AVALID_OFST (2) -#define RG_IDDIG_OFST (1) -#define RG_IDPULLUP_OFST (0) - -//U3D_U2PHYDMON0 -#define RG_USB20_PRBS7_BERTH_OFST (0) - -//U3D_U2PHYDMON1 -#define USB20_UART_O_OFST (31) -#define RGO_USB20_LB_PASS_OFST (30) -#define RGO_USB20_LB_DONE_OFST (29) -#define AD_USB20_BVALID_OFST (28) -#define USB20_IDDIG_OFST (27) -#define AD_USB20_VBUSVALID_OFST (26) -#define AD_USB20_SESSEND_OFST (25) -#define AD_USB20_AVALID_OFST (24) -#define USB20_LINE_STATE_OFST (22) -#define USB20_HST_DISCON_OFST (21) -#define USB20_TX_READY_OFST (20) -#define USB20_RX_ERROR_OFST (19) -#define USB20_RX_ACTIVE_OFST (18) -#define USB20_RX_VALIDH_OFST (17) -#define USB20_RX_VALID_OFST (16) -#define USB20_DATA_OUT_OFST (0) - -//U3D_U2PHYDMON2 -#define RGO_TXVALID_CNT_OFST (24) -#define RGO_RXACTIVE_CNT_OFST (16) -#define RGO_USB20_LB_BERCNT_OFST (8) -#define USB20_PROBE_OUT_OFST (0) - -//U3D_U2PHYDMON3 -#define RGO_USB20_PRBS7_ERRCNT_OFST (16) -#define RGO_USB20_PRBS7_DONE_OFST (3) -#define RGO_USB20_PRBS7_LOCK_OFST (2) -#define RGO_USB20_PRBS7_PASS_OFST (1) -#define RGO_USB20_PRBS7_PASSTH_OFST (0) - -//U3D_U2PHYBC12C -#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) -#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) -#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) -#define RG_CHGDT_ISRC_LEV_OFST (14) -#define RG_CHGDT_VDATSRC_OFST (13) -#define RG_CHGDT_BGVREF_SEL_OFST (10) -#define RG_CHGDT_RDVREF_SEL_OFST (8) -#define RG_CHGDT_ISRC_DP_OFST (7) -#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) -#define RG_CHGDT_VDAT_DM_OFST (5) -#define RG_CHGDT_OPOUT_DP_OFST (4) -#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) -#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) -#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) -#define RG_CHGDT_EN_OFST (0) - -//U3D_U2PHYBC12C1 -#define RG_CHGDT_REV_OFST (0) - -//U3D_REGFCOM -#define RG_PAGE_OFST (24) -#define I2C_MODE_OFST (16) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phya_reg { - //0x0 - PHY_LE32 reg0; - PHY_LE32 reg1; - PHY_LE32 reg2; - PHY_LE32 reg3; - //0x10 - PHY_LE32 reg4; - PHY_LE32 reg5; - PHY_LE32 reg6; - PHY_LE32 reg7; - //0x20 - PHY_LE32 reg8; - PHY_LE32 reg9; - PHY_LE32 rega; - PHY_LE32 regb; - //0x30 - PHY_LE32 regc; - PHY_LE32 regd; - PHY_LE32 rege; -}; - -//U3D_reg0 -#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 -#define RG_SSUSB_CHPEN (0x1<<30) //30:30 -#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 -#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 -#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 -#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 -#define RG_SSUSB_REF_EN (0x1<<15) //15:15 -#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 -#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 -#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 -#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 -#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 - -//U3D_reg1 -#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 -#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 -#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 -#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 -#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 -#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 -#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 -#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 -#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 - -//U3D_reg2 -#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 -#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 -#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 -#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 -#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 -#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 -#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 -#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 -#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 -#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 -#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 -#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 -#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 -#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 -#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 - -//U3D_reg3 -#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 - -//U3D_reg4 -#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 - -//U3D_reg5 -#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 -#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 -#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 -#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 -#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 -#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 -#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 -#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 -#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 -#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 -#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 - -//U3D_reg6 -#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 -#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 -#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 -#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 -#define RG_SSUSB_TX_SR (0x7<<20) //22:20 -#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 -#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 -#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 -#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 -#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 -#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 -#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 -#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 - -//U3D_reg7 -#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 -#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 -#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 -#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 -#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 -#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 -#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 -#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 -#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 -#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 -#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 - -//U3D_reg8 -#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 - -//U3D_reg9 -#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 - -//U3D_regA -#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 -#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 -#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 -#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 -#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 -#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 -#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 -#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 -#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 -#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 -#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 -#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 -#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 -#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 -#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 -#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 -#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 -#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 -#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 -#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 -#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 - -//U3D_regB -#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 -#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 -#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 -#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 -#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 -#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 -#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 -#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 -#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 -#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 -#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 -#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 -#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 -#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 - -//U3D_regC -#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 -#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 -#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 -#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 - -//U3D_redD -#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 -#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 - -//U3D_regE -#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 -#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 -#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 -#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 -#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 - - -/* OFFSET */ - -//U3D_reg0 -#define RG_SSUSB_BGR_EN_OFST (31) -#define RG_SSUSB_CHPEN_OFST (30) -#define RG_SSUSB_BG_DIV_OFST (28) -#define RG_SSUSB_INTR_EN_OFST (26) -#define RG_SSUSB_MPX_OUT_SEL_OFST (24) -#define RG_SSUSB_MPX_SEL_OFST (16) -#define RG_SSUSB_REF_EN_OFST (15) -#define RG_SSUSB_VRT_VREF_SEL_OFST (11) -#define RG_SSUSB_BG_RASEL_OFST (9) -#define RG_SSUSB_BG_RBSEL_OFST (7) -#define RG_SSUSB_BG_MONEN_OFST (6) -#define RG_PCIE_CLKDRV_OFFSET_OFST (0) - -//U3D_reg1 -#define RG_PCIE_CLKDRV_SLEW_OFST (30) -#define RG_PCIE_CLKDRV_AMP_OFST (27) -#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) -#define RG_SSUSB_XTAL_MON_EN_OFST (25) -#define RG_SSUSB_XTAL_HYS_OFST (24) -#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) -#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) -#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) -#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) - -//U3D_reg2 -#define RG_SSUSB_SYSPLL_LF_OFST (31) -#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) -#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) -#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) -#define RG_SSUSB_SYSPLL_BLP_OFST (20) -#define RG_SSUSB_SYSPLL_BP_OFST (19) -#define RG_SSUSB_SYSPLL_BR_OFST (18) -#define RG_SSUSB_SYSPLL_BC_OFST (17) -#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) -#define RG_SSUSB_SYSPLL_FPEN_OFST (13) -#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) -#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) -#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) -#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) -#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) - -//U3D_reg3 -#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) - -//U3D_reg4 -#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) - -//U3D_reg5 -#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) -#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) -#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) -#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) -#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) -#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) -#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) -#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) -#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) -#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) -#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) - -//U3D_reg6 -#define RG_SSUSB_TX250MCK_INVB_OFST (31) -#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) -#define RG_SSUSB_IDRV_CALIB_OFST (24) -#define RG_SSUSB_TX_R50_FON_OFST (23) -#define RG_SSUSB_TX_SR_OFST (20) -#define RG_SSUSB_TX_EIDLE_CM_OFST (16) -#define RG_SSUSB_RXDET_RSEL_OFST (14) -#define RG_SSUSB_RXDET_VTHSEL_OFST (12) -#define RG_SSUSB_CKMON_EN_OFST (11) -#define RG_SSUSB_CKMON_SEL_OFST (8) -#define RG_SSUSB_TX_VLMON_EN_OFST (7) -#define RG_SSUSB_TX_VLMON_SEL_OFST (6) -#define RG_SSUSB_RXLBTX_EN_OFST (5) -#define RG_SSUSB_TXLBRX_EN_OFST (4) - -//U3D_reg7 -#define RG_SSUSB_RESERVE_OFST (12) -#define RG_SSUSB_PLL_CKCTRL_OFST (10) -#define RG_SSUSB_PLL_POSDIV_OFST (8) -#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) -#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) -#define RG_SSUSB_PLL_EP_EN_OFST (5) -#define RG_SSUSB_PLL_VOD_EN_OFST (4) -#define RG_SSUSB_PLL_V11_EN_OFST (3) -#define RG_SSUSB_PLL_MONREF_EN_OFST (2) -#define RG_SSUSB_PLL_MONCK_EN_OFST (1) -#define RG_SSUSB_PLL_MONVC_EN_OFST (0) - -//U3D_reg8 -#define RG_SSUSB_PLL_RESERVE_OFST (0) - -//U3D_reg9 -#define RG_SSUSB_PLL_DDS_DMY_OFST (16) -#define RG_SSUSB_PLL_SSC_PRD_OFST (0) - -//U3D_regA -#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) -#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) -#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) -#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) -#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) -#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) -#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) -#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) -#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) -#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) -#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) -#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) -#define RG_SSUSB_CDR_MONMUX_OFST (11) -#define RG_SSUSB_CDR_CKCTRL_OFST (9) -#define RG_SSUSB_CDR_ACCEN_OFST (8) -#define RG_SSUSB_CDR_BYPASS_OFST (6) -#define RG_SSUSB_CDR_PI_SLEW_OFST (4) -#define RG_SSUSB_CDR_EPEN_OFST (3) -#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) -#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) -#define RG_SSUSB_CDR_MONEN_OFST (0) - -//U3D_regB -#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) -#define RG_SSUSB_CDR_REGOD_OFST (29) -#define RG_SSUSB_RX_DAC_EN_OFST (26) -#define RG_SSUSB_RX_DAC_PWD_OFST (25) -#define RG_SSUSB_EQ_CURSEL_OFST (24) -#define RG_SSUSB_RX_DAC_MUX_OFST (19) -#define RG_SSUSB_RX_R2T_EN_OFST (18) -#define RG_SSUSB_RX_T2R_EN_OFST (17) -#define RG_SSUSB_RX_50_LOWER_OFST (14) -#define RG_SSUSB_RX_50_TAR_OFST (12) -#define RG_SSUSB_RX_SW_CTRL_OFST (7) -#define RG_PCIE_SIGDET_VTH_OFST (5) -#define RG_PCIE_SIGDET_LPF_OFST (3) -#define RG_SSUSB_LFPS_MON_EN_OFST (2) - -//U3D_regC -#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) -#define RG_SSUSB_CDR_RESERVE_OFST (16) -#define RG_SSUSB_RXAFE_RESERVE_OFST (8) -#define RG_PCIE_RX_RESERVE_OFST (0) - -//U3D_redD -#define RGS_SSUSB_CDR_NO_OSC_OFST (8) -#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) - -//U3D_regE -#define RG_SSUSB_INT_BIAS_SEL_OFST (4) -#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) -#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) -#define RG_SSUSB_RX_PD_RST_OFST (1) -#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phya_da_reg { - //0x0 - PHY_LE32 reg0; - PHY_LE32 reg1; - PHY_LE32 reg4; - PHY_LE32 reg5; - //0x10 - PHY_LE32 reg6; - PHY_LE32 reg7; - PHY_LE32 reg8; - PHY_LE32 reg9; - //0x20 - PHY_LE32 reg10; - PHY_LE32 reg12; - PHY_LE32 reg13; - PHY_LE32 reg14; - //0x30 - PHY_LE32 reg15; - PHY_LE32 reg16; - PHY_LE32 reg19; - PHY_LE32 reg20; - //0x40 - PHY_LE32 reg21; - PHY_LE32 reg23; - PHY_LE32 reg25; - PHY_LE32 reg26; - //0x50 - PHY_LE32 reg28; - PHY_LE32 reg29; - PHY_LE32 reg30; - PHY_LE32 reg31; - //0x60 - PHY_LE32 reg32; - PHY_LE32 reg33; -}; - -//U3D_reg0 -#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 -#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 -#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 -#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 -#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 -#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 -#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 -#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 -#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 -#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 - -//U3D_reg1 -#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 -#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 -#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 -#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 -#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 -#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 -#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 -#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 -#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 -#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 -#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 -#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 -#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 -#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 -#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 - -//U3D_reg4 -#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 -#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 -#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 -#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 -#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 -#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 - -//U3D_reg5 -#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 -#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 -#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 -#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 -#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 -#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 -#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 -#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 - -//U3D_reg6 -#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 -#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 -#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 -#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 -#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 - -//U3D_reg7 -#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 -#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 -#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 -#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 -#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 - -//U3D_reg8 -#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 -#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 -#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 - -//U3D_reg9 -#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 -#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 -#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 -#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 - -//U3D_reg10 -#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 -#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 -#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 -#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 -#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 -#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 - -//U3D_reg12 -#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 - -//U3D_reg13 -#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 - -//U3D_reg14 -#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 - -//U3D_reg15 -#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 - -//U3D_reg16 -#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 - -//U3D_reg19 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 - -//U3D_reg20 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 - -//U3D_reg21 -#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 - -//U3D_reg23 -#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 - -//U3D_reg25 -#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 -#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 - -//U3D_reg26 -#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 -#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 -#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 -#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 -#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 - -//U3D_reg28 -#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 -#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 -#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 -#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 -#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 - -//U3D_reg29 -#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 -#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 -#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 - -//U3D_reg30 -#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 -#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 -#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 -#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 -#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 - -//U3D_reg31 -#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 -#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 -#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 -#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 - -//U3D_reg32 -#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 -#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 -#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 -#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 -#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 -#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 -#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 -#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 -#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 -#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 -#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 -#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 -#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 -#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 -#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 -#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 - -//U3D_reg33 -#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 -#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 -#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 -#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 -#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 -#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 -#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 -#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 -#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 -#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 - - -/* OFFSET */ - -//U3D_reg0 -#define RG_PCIE_SPEED_PE2D_OFST (24) -#define RG_PCIE_SPEED_PE2H_OFST (23) -#define RG_PCIE_SPEED_PE1D_OFST (22) -#define RG_PCIE_SPEED_PE1H_OFST (21) -#define RG_PCIE_SPEED_U3_OFST (20) -#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) -#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) -#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) -#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) -#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) -#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) -#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) -#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) -#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) -#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) - -//U3D_reg1 -#define RG_USB20_REFCK_SEL_PE2D_OFST (30) -#define RG_USB20_REFCK_SEL_PE2H_OFST (29) -#define RG_USB20_REFCK_SEL_PE1D_OFST (28) -#define RG_USB20_REFCK_SEL_PE1H_OFST (27) -#define RG_USB20_REFCK_SEL_U3_OFST (26) -#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) -#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) -#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) -#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) -#define RG_PCIE_REFCK_DIV4_U3_OFST (16) -#define RG_PCIE_MODE_PE2D_OFST (8) -#define RG_PCIE_MODE_PE2H_OFST (3) -#define RG_PCIE_MODE_PE1D_OFST (2) -#define RG_PCIE_MODE_PE1H_OFST (1) -#define RG_PCIE_MODE_U3_OFST (0) - -//U3D_reg4 -#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) -#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) -#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) -#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) -#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) -#define RG_SSUSB_PLL_BC_PE2D_OFST (8) -#define RG_SSUSB_PLL_BC_PE2H_OFST (6) -#define RG_SSUSB_PLL_BC_PE1D_OFST (4) -#define RG_SSUSB_PLL_BC_PE1H_OFST (2) -#define RG_SSUSB_PLL_BC_U3_OFST (0) - -//U3D_reg5 -#define RG_SSUSB_PLL_BR_PE2D_OFST (27) -#define RG_SSUSB_PLL_BR_PE2H_OFST (24) -#define RG_SSUSB_PLL_BR_PE1D_OFST (21) -#define RG_SSUSB_PLL_BR_PE1H_OFST (18) -#define RG_SSUSB_PLL_BR_U3_OFST (15) -#define RG_SSUSB_PLL_IC_PE2D_OFST (12) -#define RG_SSUSB_PLL_IC_PE2H_OFST (9) -#define RG_SSUSB_PLL_IC_PE1D_OFST (6) -#define RG_SSUSB_PLL_IC_PE1H_OFST (3) -#define RG_SSUSB_PLL_IC_U3_OFST (0) - -//U3D_reg6 -#define RG_SSUSB_PLL_IR_PE2D_OFST (24) -#define RG_SSUSB_PLL_IR_PE2H_OFST (16) -#define RG_SSUSB_PLL_IR_PE1D_OFST (8) -#define RG_SSUSB_PLL_IR_PE1H_OFST (4) -#define RG_SSUSB_PLL_IR_U3_OFST (0) - -//U3D_reg7 -#define RG_SSUSB_PLL_BP_PE2D_OFST (24) -#define RG_SSUSB_PLL_BP_PE2H_OFST (16) -#define RG_SSUSB_PLL_BP_PE1D_OFST (8) -#define RG_SSUSB_PLL_BP_PE1H_OFST (4) -#define RG_SSUSB_PLL_BP_U3_OFST (0) - -//U3D_reg8 -#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) -#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) -#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) -#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) -#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) - -//U3D_reg9 -#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) -#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) -#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) - -//U3D_reg10 -#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) -#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) -#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) -#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) -#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) - -//U3D_reg12 -#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) - -//U3D_reg13 -#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) - -//U3D_reg14 -#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) - -//U3D_reg15 -#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) - -//U3D_reg16 -#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) - -//U3D_reg19 -#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) - -//U3D_reg20 -#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) - -//U3D_reg21 -#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) - -//U3D_reg23 -#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) - -//U3D_reg25 -#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) -#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) - -//U3D_reg26 -#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) -#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) -#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) -#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) -#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) - -//U3D_reg28 -#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) -#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) -#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) -#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) -#define RG_SSUSB_CDR_BPA_U3_OFST (0) - -//U3D_reg29 -#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) -#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) -#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) -#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) -#define RG_SSUSB_CDR_BPB_U3_OFST (0) - -//U3D_reg30 -#define RG_SSUSB_CDR_BR_PE2D_OFST (24) -#define RG_SSUSB_CDR_BR_PE2H_OFST (16) -#define RG_SSUSB_CDR_BR_PE1D_OFST (6) -#define RG_SSUSB_CDR_BR_PE1H_OFST (3) -#define RG_SSUSB_CDR_BR_U3_OFST (0) - -//U3D_reg31 -#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) -#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) -#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) -#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) - -//U3D_reg32 -#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) -#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) -#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) -#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) -#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) -#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) -#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) -#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) -#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) -#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) -#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) -#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) -#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) -#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) -#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) -#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) - -//U3D_reg33 -#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) -#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) -#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) -#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) -#define RG_SSUSB_RX_CMPWD_U3_OFST (16) -#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) -#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) -#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) -#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) -#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phyd_reg { - //0x0 - PHY_LE32 phyd_mix0; - PHY_LE32 phyd_mix1; - PHY_LE32 phyd_lfps0; - PHY_LE32 phyd_lfps1; - //0x10 - PHY_LE32 phyd_impcal0; - PHY_LE32 phyd_impcal1; - PHY_LE32 phyd_txpll0; - PHY_LE32 phyd_txpll1; - //0x20 - PHY_LE32 phyd_txpll2; - PHY_LE32 phyd_fl0; - PHY_LE32 phyd_mix2; - PHY_LE32 phyd_rx0; - //0x30 - PHY_LE32 phyd_t2rlb; - PHY_LE32 phyd_cppat; - PHY_LE32 phyd_mix3; - PHY_LE32 phyd_ebufctl; - //0x40 - PHY_LE32 phyd_pipe0; - PHY_LE32 phyd_pipe1; - PHY_LE32 phyd_mix4; - PHY_LE32 phyd_ckgen0; - //0x50 - PHY_LE32 phyd_mix5; - PHY_LE32 phyd_reserved; - PHY_LE32 phyd_cdr0; - PHY_LE32 phyd_cdr1; - //0x60 - PHY_LE32 phyd_pll_0; - PHY_LE32 phyd_pll_1; - PHY_LE32 phyd_bcn_det_1; - PHY_LE32 phyd_bcn_det_2; - //0x70 - PHY_LE32 eq0; - PHY_LE32 eq1; - PHY_LE32 eq2; - PHY_LE32 eq3; - //0x80 - PHY_LE32 eq_eye0; - PHY_LE32 eq_eye1; - PHY_LE32 eq_eye2; - PHY_LE32 eq_dfe0; - //0x90 - PHY_LE32 eq_dfe1; - PHY_LE32 eq_dfe2; - PHY_LE32 eq_dfe3; - PHY_LE32 reserve0; - //0xa0 - PHY_LE32 phyd_mon0; - PHY_LE32 phyd_mon1; - PHY_LE32 phyd_mon2; - PHY_LE32 phyd_mon3; - //0xb0 - PHY_LE32 phyd_mon4; - PHY_LE32 phyd_mon5; - PHY_LE32 phyd_mon6; - PHY_LE32 phyd_mon7; - //0xc0 - PHY_LE32 phya_rx_mon0; - PHY_LE32 phya_rx_mon1; - PHY_LE32 phya_rx_mon2; - PHY_LE32 phya_rx_mon3; - //0xd0 - PHY_LE32 phya_rx_mon4; - PHY_LE32 phya_rx_mon5; - PHY_LE32 phyd_cppat2; - PHY_LE32 eq_eye3; - //0xe0 - PHY_LE32 kband_out; - PHY_LE32 kband_out1; -}; - -//U3D_PHYD_MIX0 -#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 -#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 -#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 -#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 -#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 -#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 -#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 -#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 -#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 -#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 -#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 -#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 -#define RG_SSUSB_COMCNT (0xf<<4) //7:4 -#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 - -//U3D_PHYD_MIX1 -#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 -#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 -#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 -#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 -#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 -#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 -#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 -#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 -#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 -#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 -#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 -#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 -#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 - -//U3D_PHYD_LFPS0 -#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 -#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 -#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 -#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 -#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 -#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 -#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 -#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 -#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 -#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 -#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 -#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 -#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 - -//U3D_PHYD_LFPS1 -#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 -#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 -#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 -#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 -#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 - -//U3D_PHYD_IMPCAL0 -#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 -#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 -#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 -#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 -#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 -#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 - -//U3D_PHYD_IMPCAL1 -#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 -#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 -#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 -#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 -#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 -#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 -#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 - -//U3D_PHYD_TXPLL0 -#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 -#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 -#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 -#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 -#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 -#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 - -//U3D_PHYD_TXPLL1 -#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 -#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 -#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 -#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 -#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 -#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 -#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 -#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 -#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 -#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 -#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 -#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 -#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 -#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 -#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 -#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 -#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 -#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 -#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 -#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 -#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 - -//U3D_PHYD_TXPLL2 -#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 -#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 -#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 -#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 -#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 -#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 -#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 -#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 -#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 -#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 -#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 -#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 -#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 -#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 - -//U3D_PHYD_FL0 -#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 -#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 - -//U3D_PHYD_MIX2 -#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 -#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 -#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 -#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 -#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 -#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 -#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 -#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 - -//U3D_PHYD_RX0 -#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 -#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 -#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 -#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 -#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 -#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 -#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 -#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 -#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 -#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 -#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 -#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 -#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 -#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 -#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 -#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 -#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 - -//U3D_PHYD_T2RLB -#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 -#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 -#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 -#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 -#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 -#define RG_SSUSB_K_EMP (0xf<<20) //23:20 -#define RG_SSUSB_K_FUL (0xf<<16) //19:16 -#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 -#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 -#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 -#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 - -//U3D_PHYD_CPPAT -#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 -#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 -#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 -#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 -#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 -#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 - -//U3D_PHYD_MIX3 -#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 -#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 -#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 -#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 -#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 -#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 -#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 -#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 -#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 -#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 -#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 -#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 -#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 -#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 - -//U3D_PHYD_EBUFCTL -#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 - -//U3D_PHYD_PIPE0 -#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 -#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 -#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 -#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 -#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 -#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 -#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 -#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 -#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 -#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 -#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 -#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 -#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 -#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 -#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 -#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 -#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 - -//U3D_PHYD_PIPE1 -#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 - -//U3D_PHYD_MIX4 -#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 -#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 -#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 - -//U3D_PHYD_CKGEN0 -#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 -#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 -#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 -#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 - -//U3D_PHYD_MIX5 -#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 -#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 - -//U3D_PHYD_RESERVED -#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 -//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) -//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) - -//U3D_PHYD_CDR0 -#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_PHYD_CDR1 -#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 -#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_PHYD_PLL_0 -#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 -#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 -#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 -#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 -#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 -#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 -#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 -#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 -#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 -#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 -#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 - -//U3D_PHYD_PLL_1 -#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 -#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 -#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 -#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 - -//U3D_PHYD_BCN_DET_1 -#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 -#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 - -//U3D_PHYD_BCN_DET_2 -#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 -#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 -#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 - -//U3D_EQ0 -#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 - -//U3D_EQ1 -#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 - -//U3D_EQ2 -#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 -#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 -#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 -#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 -#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 -#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 - -//U3D_EQ3 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 -#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 -#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 - -//U3D_EQ_EYE0 -#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 -#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 -#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 -#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 -#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 - -//U3D_EQ_EYE1 -#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 -#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 - -//U3D_EQ_EYE2 -#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 -#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 -#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 -#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 - -//U3D_EQ_DFE0 -#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 -#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 -#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 -#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 -#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 -#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 -#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 - -//U3D_EQ_DFE1 -#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 -#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 -#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 -#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 -#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 -#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 -#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 -#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 -#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 - -//U3D_EQ_DFE2 -#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 -#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 -#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 -#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 - -//U3D_EQ_DFE3 -#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 - -//U3D_PHYD_MON0 -#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 -#define RGS_SSUSB_LFPS (0xf<<12) //15:12 -#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 -#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 - -//U3D_PHYD_MON1 -#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 - -//U3D_PHYD_MON2 -#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 -#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 -#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 -#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 -#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 -#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 - -//U3D_PHYD_MON3 -#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 -#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 - -//U3D_PHYD_MON4 -#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 -#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 -#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 - -//U3D_PHYD_MON5 -#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 -#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 -#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 -#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 -#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 -#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 -#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 -#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 -#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 -#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 -#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 -#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 -#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 -#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 -#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 -#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 - -//U3D_PHYD_MON6 -#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 -#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 -#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 -#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 -#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 -#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 -#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 - -//U3D_PHYD_MON7 -#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 -#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 - -//U3D_PHYA_RX_MON0 -#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 -#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 -#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON1 -#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 -#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 -#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON2 -#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 -#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 -#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 -#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 -#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 - -//U3D_PHYA_RX_MON3 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 - -//U3D_PHYA_RX_MON4 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 - -//U3D_PHYA_RX_MON5 -#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 -#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 -#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 - -//U3D_PHYD_CPPAT2 -#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 -#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 -#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 - -//U3D_EQ_EYE3 -#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 -#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 - -//U3D_KBAND_OUT -#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 -#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 -#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 -#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 - -//U3D_KBAND_OUT1 -#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 -#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 -#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 -#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 - - -/* OFFSET */ - -//U3D_PHYD_MIX0 -#define RG_SSUSB_P_P3_TX_NG_OFST (31) -#define RG_SSUSB_TSEQ_EN_OFST (30) -#define RG_SSUSB_TSEQ_POLEN_OFST (29) -#define RG_SSUSB_TSEQ_POL_OFST (28) -#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) -#define RG_SSUSB_TSEQ_TH_OFST (24) -#define RG_SSUSB_PRBS_BERTH_OFST (16) -#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) -#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) -#define RG_SSUSB_PRBS_EN_OFST (13) -#define RG_SSUSB_BPSLOCK_OFST (12) -#define RG_SSUSB_RTCOMCNT_OFST (8) -#define RG_SSUSB_COMCNT_OFST (4) -#define RG_SSUSB_PRBSEL_CALIB_OFST (0) - -//U3D_PHYD_MIX1 -#define RG_SSUSB_SLEEP_EN_OFST (31) -#define RG_SSUSB_PRBSEL_PCS_OFST (28) -#define RG_SSUSB_TXLFPS_PRD_OFST (24) -#define RG_SSUSB_P_RX_P0S_CK_OFST (23) -#define RG_SSUSB_P_TX_P0S_CK_OFST (22) -#define RG_SSUSB_PDNCTL_OFST (16) -#define RG_SSUSB_TX_DRV_EN_OFST (15) -#define RG_SSUSB_TX_DRV_SEL_OFST (14) -#define RG_SSUSB_TX_DRV_DLY_OFST (8) -#define RG_SSUSB_BERT_EN_OFST (7) -#define RG_SSUSB_SCP_TH_OFST (4) -#define RG_SSUSB_SCP_EN_OFST (3) -#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) - -//U3D_PHYD_LFPS0 -#define RG_SSUSB_LFPS_PWD_OFST (30) -#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) -#define RG_SSUSB_RXLFPS_OVF_OFST (24) -#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) -#define RG_SSUSB_P3_ENTRY_OFST (22) -#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) -#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) -#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) -#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) -#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) -#define RG_SSUSB_RXLFPS_LOB_OFST (8) -#define RG_SSUSB_TXLFPS_EN_OFST (7) -#define RG_SSUSB_TXLFPS_SEL_OFST (6) -#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) -#define RG_SSUSB_RXLFPS_UPB_OFST (0) - -//U3D_PHYD_LFPS1 -#define RG_SSUSB_RX_IMP_BIAS_OFST (28) -#define RG_SSUSB_TX_IMP_BIAS_OFST (24) -#define RG_SSUSB_FWAKE_TH_OFST (16) -#define RG_SSUSB_RXLFPS_UDF_OFST (8) -#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) - -//U3D_PHYD_IMPCAL0 -#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) -#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) -#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) -#define RG_SSUSB_TX_IMPSEL_OFST (24) -#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) -#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) -#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) - -//U3D_PHYD_IMPCAL1 -#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) -#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) -#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) -#define RG_SSUSB_RX_IMPSEL_OFST (24) -#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) -#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) -#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) - -//U3D_PHYD_TXPLL0 -#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) -#define RG_SSUSB_TXPLL_ON_OFST (26) -#define RG_SSUSB_FORCE_TXPLLON_OFST (25) -#define RG_SSUSB_TXPLL_STBCYC_OFST (16) -#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) -#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) -#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) - -//U3D_PHYD_TXPLL1 -#define RG_SSUSB_PLL_NCPO_EN_OFST (31) -#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) -#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) -#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) -#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) -#define RG_SSUSB_PLL_DDSEN_OFST (25) -#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) -#define RG_SSUSB_PLL_PWD_OFST (23) -#define RG_SSUSB_RX_AFE_PWD_OFST (22) -#define RG_SSUSB_PLL_TCADJ_OFST (16) -#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) -#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) -#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) -#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) -#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) -#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) -#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) -#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) -#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) -#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) -#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) -#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) -#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) - -//U3D_PHYD_TXPLL2 -#define RG_SSUSB_TX_LFPS_EN_OFST (31) -#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) -#define RG_SSUSB_TX_LFPS_OFST (29) -#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) -#define RG_SSUSB_RXPLL_STB_OFST (27) -#define RG_SSUSB_TXPLL_STB_OFST (26) -#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) -#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) -#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) -#define RG_SSUSB_RXPLL_STBMODE_OFST (11) -#define RG_SSUSB_RXPLL_ON_OFST (10) -#define RG_SSUSB_FORCE_RXPLLON_OFST (9) -#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) -#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) -#define RG_SSUSB_CDR_PWD_OFST (6) -#define RG_SSUSB_CDR_TCADJ_OFST (0) - -//U3D_PHYD_FL0 -#define RG_SSUSB_RX_FL_TARGET_OFST (16) -#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) - -//U3D_PHYD_MIX2 -#define RG_SSUSB_RX_EQ_RST_OFST (31) -#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) -#define RG_SSUSB_RXVAL_RST_OFST (29) -#define RG_SSUSB_RXVAL_CNT_OFST (24) -#define RG_SSUSB_CDROS_EN_OFST (18) -#define RG_SSUSB_CDR_LCKOP_OFST (16) -#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) -#define RG_SSUSB_RX_FL_OFFSET_OFST (0) - -//U3D_PHYD_RX0 -#define RG_SSUSB_T2RLB_BERTH_OFST (24) -#define RG_SSUSB_T2RLB_PAT_OFST (16) -#define RG_SSUSB_T2RLB_EN_OFST (15) -#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) -#define RG_SSUSB_T2RLB_SERIAL_OFST (13) -#define RG_SSUSB_T2RLB_MODE_OFST (11) -#define RG_SSUSB_RX_SAOSC_EN_OFST (10) -#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) -#define RG_SSUSB_RX_DFE_OPTION_OFST (8) -#define RG_SSUSB_RX_DFE_EN_OFST (7) -#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) -#define RG_SSUSB_RX_EQ_EN_OFST (5) -#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) -#define RG_SSUSB_RX_SAOSC_RST_OFST (3) -#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) -#define RG_SSUSB_RX_DFE_RST_OFST (1) -#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) - -//U3D_PHYD_T2RLB -#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) -#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) -#define RG_SSUSB_BPANSIENC_OFST (26) -#define RG_SSUSB_VALID_EN_OFST (25) -#define RG_SSUSB_EBUF_SRST_OFST (24) -#define RG_SSUSB_K_EMP_OFST (20) -#define RG_SSUSB_K_FUL_OFST (16) -#define RG_SSUSB_T2RLB_BDATRST_OFST (12) -#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) -#define RG_SSUSB_T2RLB_PATMODE_OFST (8) -#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) - -//U3D_PHYD_CPPAT -#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) -#define RG_SSUSB_CPPAT_TOZ_OFST (21) -#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) -#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) -#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) -#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) - -//U3D_PHYD_MIX3 -#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) -#define RG_SSUSB_P_CDROS_EN_OFST (30) -#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) -#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) -#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) -#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) -#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) -#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) -#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) -#define RG_SSUSB_PLL_SSCEN_OFST (14) -#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) -#define RG_SSUSB_CDR_PI_PWD_OFST (12) -#define RG_SSUSB_CDR_PI_MODE_OFST (11) -#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) - -//U3D_PHYD_EBUFCTL -#define RG_SSUSB_EBUFCTL_OFST (0) - -//U3D_PHYD_PIPE0 -#define RG_SSUSB_RXTERMINATION_OFST (30) -#define RG_SSUSB_RXEQTRAINING_OFST (29) -#define RG_SSUSB_RXPOLARITY_OFST (28) -#define RG_SSUSB_TXDEEMPH_OFST (26) -#define RG_SSUSB_POWERDOWN_OFST (24) -#define RG_SSUSB_TXONESZEROS_OFST (23) -#define RG_SSUSB_TXELECIDLE_OFST (22) -#define RG_SSUSB_TXDETECTRX_OFST (21) -#define RG_SSUSB_PIPE_SEL_OFST (20) -#define RG_SSUSB_TXDATAK_OFST (16) -#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) -#define RG_SSUSB_CDR_STABLE_OFST (14) -#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) -#define RG_SSUSB_CDR_RSTB_OFST (12) -#define RG_SSUSB_P_ERROR_SEL_OFST (4) -#define RG_SSUSB_TXMARGIN_OFST (1) -#define RG_SSUSB_TXCOMPLIANCE_OFST (0) - -//U3D_PHYD_PIPE1 -#define RG_SSUSB_TXDATA_OFST (0) - -//U3D_PHYD_MIX4 -#define RG_SSUSB_CDROS_CNT_OFST (24) -#define RG_SSUSB_T2RLB_BER_EN_OFST (16) -#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) - -//U3D_PHYD_CKGEN0 -#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) -#define RG_SSUSB_TFIFO_PSEL_OFST (24) -#define RG_SSUSB_CKGEN_PSEL_OFST (8) -#define RG_SSUSB_RXCK_INV_OFST (0) - -//U3D_PHYD_MIX5 -#define RG_SSUSB_PRB_SEL_OFST (16) -#define RG_SSUSB_RXPLL_STBCYC_OFST (0) - -//U3D_PHYD_RESERVED -#define RG_SSUSB_PHYD_RESERVE_OFST (0) -//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) -//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) -//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) - -//U3D_PHYD_CDR0 -#define RG_SSUSB_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_CDR_BC_LTD0_OFST (0) - -//U3D_PHYD_CDR1 -#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_CDR_BW_SEL_OFST (6) -#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) - -//U3D_PHYD_PLL_0 -#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) -#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) -#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) -#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) -#define RG_SSUSB_P_EQ_T_SEL_OFST (15) -#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) -#define RG_SSUSB_PLLBAND_RECAL_OFST (4) -#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) -#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) -#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) -#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) - -//U3D_PHYD_PLL_1 -#define RG_SSUSB_CDR_BAND_5G_OFST (24) -#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) -#define RG_SSUSB_PLL_BAND_5G_OFST (8) -#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) - -//U3D_PHYD_BCN_DET_1 -#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) -#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) - -//U3D_PHYD_BCN_DET_2 -#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) -#define RG_SSUSB_BCN_DET_DIS_OFST (12) -#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) - -//U3D_EQ0 -#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) -#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) -#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) -#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) - -//U3D_EQ1 -#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) -#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) -#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) -#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) - -//U3D_EQ2 -#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) -#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) -#define RG_SSUSB_EQ_STOPTIME_OFST (14) -#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) -#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) -#define RG_SSUSB_EQ_STARTTIME_OFST (6) -#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) -#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) - -//U3D_EQ3 -#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) -#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) -#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) -#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) -#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) -#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) - -//U3D_EQ_EYE0 -#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) -#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) -#define RG_SSUSB_EQ_EYE0_Y_OFST (16) -#define RG_SSUSB_EQ_EYE1_Y_OFST (8) -#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) -#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) -#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) - -//U3D_EQ_EYE1 -#define RG_SSUSB_EQ_SIGDET_OFST (24) -#define RG_SSUSB_EQ_EYE_MASK_OFST (7) - -//U3D_EQ_EYE2 -#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) -#define RG_SSUSB_EQ_SD_CNT1_OFST (24) -#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) -#define RG_SSUSB_EQ_SD_CNT0_OFST (16) - -//U3D_EQ_DFE0 -#define RG_SSUSB_EQ_LEQMAX_OFST (28) -#define RG_SSUSB_EQ_DFEX_EN_OFST (27) -#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) -#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) -#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) -#define RG_SSUSB_EQ_PI90_INI_OFST (8) -#define RG_SSUSB_EQ_PI0_INI_OFST (0) - -//U3D_EQ_DFE1 -#define RG_SSUSB_EQ_REV_OFST (16) -#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) -#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) -#define RG_SSUSB_EQ_DFEX_RST_OFST (7) -#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) -#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) -#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) -#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) -#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) - -//U3D_EQ_DFE2 -#define RG_SSUSB_EQ_MON_SEL_OFST (24) -#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) -#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) -#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) - -//U3D_EQ_DFE3 -#define RG_SSUSB_EQ_RESERVED_OFST (0) - -//U3D_PHYD_MON0 -#define RGS_SSUSB_BERT_BERC_OFST (16) -#define RGS_SSUSB_LFPS_OFST (12) -#define RGS_SSUSB_TRAINDEC_OFST (8) -#define RGS_SSUSB_SCP_PAT_OFST (0) - -//U3D_PHYD_MON1 -#define RGS_SSUSB_RX_FL_OUT_OFST (0) - -//U3D_PHYD_MON2 -#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) -#define RGS_SSUSB_RETRACK_OFST (12) -#define RGS_SSUSB_RXPLL_LOCK_OFST (10) -#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) -#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) -#define RGS_SSUSB_PDNCTL_OFST (0) - -//U3D_PHYD_MON3 -#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) -#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) - -//U3D_PHYD_MON4 -#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) -#define RGS_SSUSB_SCP_DETCNT_OFST (16) -#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) - -//U3D_PHYD_MON5 -#define RGS_SSUSB_EBUFMSG_OFST (16) -#define RGS_SSUSB_BERT_LOCK_OFST (15) -#define RGS_SSUSB_SCP_DET_OFST (14) -#define RGS_SSUSB_TSEQ_DET_OFST (13) -#define RGS_SSUSB_EBUF_UDF_OFST (12) -#define RGS_SSUSB_EBUF_OVF_OFST (11) -#define RGS_SSUSB_PRBS_PASSTH_OFST (10) -#define RGS_SSUSB_PRBS_PASS_OFST (9) -#define RGS_SSUSB_PRBS_LOCK_OFST (8) -#define RGS_SSUSB_T2RLB_ERR_OFST (6) -#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) -#define RGS_SSUSB_T2RLB_PASS_OFST (4) -#define RGS_SSUSB_T2RLB_LOCK_OFST (3) -#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) -#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) -#define RGS_SSUSB_RXDETECTED_OFST (0) - -//U3D_PHYD_MON6 -#define RGS_SSUSB_SIGCAL_DONE_OFST (30) -#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) -#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) -#define RGS_SSUSB_RX_IMP_SEL_OFST (16) -#define RGS_SSUSB_TX_IMP_SEL_OFST (8) -#define RGS_SSUSB_TFIFO_MSG_OFST (4) -#define RGS_SSUSB_RFIFO_MSG_OFST (0) - -//U3D_PHYD_MON7 -#define RGS_SSUSB_FT_OUT_OFST (8) -#define RGS_SSUSB_PRB_OUT_OFST (0) - -//U3D_PHYA_RX_MON0 -#define RGS_SSUSB_EQ_DCLEQ_OFST (24) -#define RGS_SSUSB_EQ_DCD0H_OFST (16) -#define RGS_SSUSB_EQ_DCD0L_OFST (8) -#define RGS_SSUSB_EQ_DCD1H_OFST (0) - -//U3D_PHYA_RX_MON1 -#define RGS_SSUSB_EQ_DCD1L_OFST (24) -#define RGS_SSUSB_EQ_DCE0_OFST (16) -#define RGS_SSUSB_EQ_DCE1_OFST (8) -#define RGS_SSUSB_EQ_DCHHL_OFST (0) - -//U3D_PHYA_RX_MON2 -#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) -#define RGS_SSUSB_EQ_DCLHL_OFST (24) -#define RGS_SSUSB_EQ_STATUS_OFST (16) -#define RGS_SSUSB_EQ_DCEYE0_OFST (8) -#define RGS_SSUSB_EQ_DCEYE1_OFST (0) - -//U3D_PHYA_RX_MON3 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) - -//U3D_PHYA_RX_MON4 -#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) - -//U3D_PHYA_RX_MON5 -#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) -#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) -#define RGS_SSUSB_EQ_PILPO_OFST (0) - -//U3D_PHYD_CPPAT2 -#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) -#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) -#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) - -//U3D_EQ_EYE3 -#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) -#define RG_SSUSB_EQ_EYE_CNT_OFST (0) - -//U3D_KBAND_OUT -#define RGS_SSUSB_CDR_BAND_5G_OFST (24) -#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) -#define RGS_SSUSB_PLL_BAND_5G_OFST (8) -#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) - -//U3D_KBAND_OUT1 -#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) -#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) -#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) -#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct u3phyd_bank2_reg { - //0x0 - PHY_LE32 b2_phyd_top1; - PHY_LE32 b2_phyd_top2; - PHY_LE32 b2_phyd_top3; - PHY_LE32 b2_phyd_top4; - //0x10 - PHY_LE32 b2_phyd_top5; - PHY_LE32 b2_phyd_top6; - PHY_LE32 b2_phyd_top7; - PHY_LE32 b2_phyd_p_sigdet1; - //0x20 - PHY_LE32 b2_phyd_p_sigdet2; - PHY_LE32 b2_phyd_p_sigdet_cal1; - PHY_LE32 b2_phyd_rxdet1; - PHY_LE32 b2_phyd_rxdet2; - //0x30 - PHY_LE32 b2_phyd_misc0; - PHY_LE32 b2_phyd_misc2; - PHY_LE32 b2_phyd_misc3; - PHY_LE32 reserve0; - //0x40 - PHY_LE32 b2_rosc_0; - PHY_LE32 b2_rosc_1; - PHY_LE32 b2_rosc_2; - PHY_LE32 b2_rosc_3; - //0x50 - PHY_LE32 b2_rosc_4; - PHY_LE32 b2_rosc_5; - PHY_LE32 b2_rosc_6; - PHY_LE32 b2_rosc_7; - //0x60 - PHY_LE32 b2_rosc_8; - PHY_LE32 b2_rosc_9; - PHY_LE32 b2_rosc_a; - PHY_LE32 reserve1; - //0x70~0xd0 - PHY_LE32 reserve2[28]; - //0xe0 - PHY_LE32 phyd_version; - PHY_LE32 phyd_model; -}; - -//U3D_B2_PHYD_TOP1 -#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 -#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 -#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 -#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 -#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 -#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 -#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 -#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 -#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 -#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 -#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 -#define RG_SSUSB_RATE (0x1<<6) //6:6 -#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 -#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 -#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 -#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 -#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 - -//U3D_B2_PHYD_TOP2 -#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 -#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 -#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 -#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 -#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 -#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 -#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 -#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 - -//U3D_B2_PHYD_TOP3 -#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 -#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 -#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 -#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 -#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 -#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 - -//U3D_B2_PHYD_TOP4 -#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_B2_PHYD_TOP5 -#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_B2_PHYD_TOP6 -#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 -#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 -#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 -#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 -#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 - -//U3D_B2_PHYD_TOP7 -#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 -#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 -#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 -#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 - -//U3D_B2_PHYD_P_SIGDET1 -#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 -#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 -#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 -#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 -#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 - -//U3D_B2_PHYD_P_SIGDET2 -#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 -#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 -#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 -#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 -#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 -#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 -#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 -#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 -#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 -#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 -#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 -#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 -#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 - -//U3D_B2_PHYD_P_SIGDET_CAL1 -#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 -#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 -#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 -#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 -#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 -#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 -#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 - -//U3D_B2_PHYD_RXDET1 -#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 -#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 -#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 -#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 -#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 -#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 -#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 -#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 - -//U3D_B2_PHYD_RXDET2 -#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 -#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 -#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 -#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 -#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 -#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 - -//U3D_B2_PHYD_MISC0 -#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 -#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 -#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 -#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 -#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 -#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 -#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 -#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 -#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 -#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 -#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 -#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 -#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 -#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 -#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 -#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 - -//U3D_B2_PHYD_MISC2 -#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 -#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 -#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 -#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 -#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 -#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 -#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 -#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 -#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 -#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 -#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 - -//U3D_B2_PHYD_MISC3 -#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 -#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 - -//U3D_B2_ROSC_0 -#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 -#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 -#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 -#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 -#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 -#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 - -//U3D_B2_ROSC_1 -#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 -#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 -#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 -#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 -#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 -#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 - -//U3D_B2_ROSC_2 -#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_3 -#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_4 -#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_5 -#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_6 -#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_7 -#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 -#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 - -//U3D_B2_ROSC_8 -#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 -#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 -#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 -#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 - -//U3D_B2_ROSC_9 -#define RGS_FM_RING_CNT (0xffff<<16) //31:16 -#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 -#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 -#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 -#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 - -//U3D_B2_ROSC_A -#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 - -//U3D_PHYD_VERSION -#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 - -//U3D_PHYD_MODEL -#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 - - -/* OFFSET */ - -//U3D_B2_PHYD_TOP1 -#define RG_SSUSB_PCIE2_K_EMP_OFST (28) -#define RG_SSUSB_PCIE2_K_FUL_OFST (24) -#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) -#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) -#define RG_SSUSB_SIGDET_EN_OFST (15) -#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) -#define RG_SSUSB_CLKRX_EN_OFST (13) -#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) -#define RG_SSUSB_CLKTX_EN_OFST (11) -#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) -#define RG_SSUSB_CLK_REQ_N_I_OFST (9) -#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) -#define RG_SSUSB_RATE_OFST (6) -#define RG_SSUSB_FORCE_RATE_OFST (5) -#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) -#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) -#define RG_SSUSB_PHY_MODE_OFST (1) -#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) - -//U3D_B2_PHYD_TOP2 -#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) -#define RG_SSUSB_IDRV_6DB_OFST (24) -#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) -#define RG_SSUSB_IDEM_3P5DB_OFST (16) -#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) -#define RG_SSUSB_IDRV_3P5DB_OFST (8) -#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) -#define RG_SSUSB_IDRV_0DB_OFST (0) - -//U3D_B2_PHYD_TOP3 -#define RG_SSUSB_TX_BIASI_OFST (25) -#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) -#define RG_SSUSB_TX_BIASI_EN_OFST (16) -#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) -#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) -#define RG_SSUSB_IDEM_6DB_OFST (0) - -//U3D_B2_PHYD_TOP4 -#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) - -//U3D_B2_PHYD_TOP5 -#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) - -//U3D_B2_PHYD_TOP6 -#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) -#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) -#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) -#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) -#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) - -//U3D_B2_PHYD_TOP7 -#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) -#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) -#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) -#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) - -//U3D_B2_PHYD_P_SIGDET1 -#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) -#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) -#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) -#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) -#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) - -//U3D_B2_PHYD_P_SIGDET2 -#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) -#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) -#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) -#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) -#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) -#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) -#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) -#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) -#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) -#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) -#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) -#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) -#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) - -//U3D_B2_PHYD_P_SIGDET_CAL1 -#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) -#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) -#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) -#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) -#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) -#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) -#define RG_SSUSB_P_SIGDET_REK_OFST (0) - -//U3D_B2_PHYD_RXDET1 -#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) -#define RG_SSUSB_FORCE_CMDET_OFST (30) -#define RG_SSUSB_RXDET_EN_OFST (29) -#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) -#define RG_SSUSB_RXDET_K_TWICE_OFST (27) -#define RG_SSUSB_RXDET_STB3_SET_OFST (18) -#define RG_SSUSB_RXDET_STB2_SET_OFST (9) -#define RG_SSUSB_RXDET_STB1_SET_OFST (0) - -//U3D_B2_PHYD_RXDET2 -#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) -#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) -#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) -#define RG_SSUSB_PDN_T_SEL_OFST (18) -#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) -#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) - -//U3D_B2_PHYD_MISC0 -#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) -#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) -#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) -#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) -#define RG_SSUSB_LFPS_PSEL_OFST (15) -#define RG_SSUSB_RX_SIGDET_EN_OFST (14) -#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) -#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) -#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) -#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) -#define RG_SSUSB_T2RLB_PSEL_OFST (8) -#define RG_SSUSB_PPCTL_PSEL_OFST (5) -#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) -#define RG_SSUSB_BERTLB_PSEL_OFST (2) -#define RG_SSUSB_RETRACK_DIS_OFST (1) -#define RG_SSUSB_PPERRCNT_CLR_OFST (0) - -//U3D_B2_PHYD_MISC2 -#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) -#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) -#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) -#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) -#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) -#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) -#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) -#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) -#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) -#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) -#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) - -//U3D_B2_PHYD_MISC3 -#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) -#define RGS_SSUSB_PPERRCNT_OFST (0) - -//U3D_B2_ROSC_0 -#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) -#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) -#define RG_SSUSB_RING_OSC_EN_OFST (3) -#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) -#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) -#define RG_SSUSB_RING_BYPASS_DET_OFST (0) - -//U3D_B2_ROSC_1 -#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) -#define RG_SSUSB_RING_OSC_P3_OFST (19) -#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) -#define RG_SSUSB_RING_OSC_RECAL_OFST (16) -#define RG_SSUSB_RING_OSC_SEL_OFST (8) -#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) - -//U3D_B2_ROSC_2 -#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) -#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) - -//U3D_B2_ROSC_3 -#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) -#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) - -//U3D_B2_ROSC_4 -#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) -#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) - -//U3D_B2_ROSC_5 -#define RG_SSUSB_RING_DET_LBOND1_OFST (16) -#define RG_SSUSB_RING_DET_UBOND1_OFST (0) - -//U3D_B2_ROSC_6 -#define RG_SSUSB_RING_DET_LBOND2_OFST (16) -#define RG_SSUSB_RING_DET_UBOND2_OFST (0) - -//U3D_B2_ROSC_7 -#define RG_SSUSB_RING_DET_LBOND3_OFST (16) -#define RG_SSUSB_RING_DET_UBOND3_OFST (0) - -//U3D_B2_ROSC_8 -#define RG_SSUSB_RING_RESERVE_OFST (16) -#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) -#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) -#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) - -//U3D_B2_ROSC_9 -#define RGS_FM_RING_CNT_OFST (16) -#define RGS_SSUSB_RING_OSC_STATE_OFST (10) -#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) -#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) -#define RGS_SSUSB_RING_OSC_CAL_OFST (0) - -//U3D_B2_ROSC_A -#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) - -//U3D_PHYD_VERSION -#define RGS_SSUSB_PHYD_VERSION_OFST (0) - -//U3D_PHYD_MODEL -#define RGS_SSUSB_PHYD_MODEL_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -struct sifslv_chip_reg { - PHY_LE32 xtalbias; - PHY_LE32 syspll1; - PHY_LE32 gpio_ctla; - PHY_LE32 gpio_ctlb; - PHY_LE32 gpio_ctlc; -}; - -//U3D_GPIO_CTLA -#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 - -//U3D_GPIO_CTLB -#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 - -//U3D_GPIO_CTLC -#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 - -/* OFFSET */ - -//U3D_GPIO_CTLA -#define RG_C60802_GPIO_CTLA_OFST (0) - -//U3D_GPIO_CTLB -#define RG_C60802_GPIO_CTLB_OFST (0) - -//U3D_GPIO_CTLC -#define RG_C60802_GPIO_CTLC_OFST (0) - -/////////////////////////////////////////////////////////////////////////////// - -struct sifslv_fm_feg { - //0x0 - PHY_LE32 fmcr0; - PHY_LE32 fmcr1; - PHY_LE32 fmcr2; - PHY_LE32 fmmonr0; - //0x10 - PHY_LE32 fmmonr1; -}; - -//U3D_FMCR0 -#define RG_LOCKTH (0xf<<28) //31:28 -#define RG_MONCLK_SEL (0x3<<26) //27:26 -#define RG_FM_MODE (0x1<<25) //25:25 -#define RG_FREQDET_EN (0x1<<24) //24:24 -#define RG_CYCLECNT (0xffffff<<0) //23:0 - -//U3D_FMCR1 -#define RG_TARGET (0xffffffff<<0) //31:0 - -//U3D_FMCR2 -#define RG_OFFSET (0xffffffff<<0) //31:0 - -//U3D_FMMONR0 -#define USB_FM_OUT (0xffffffff<<0) //31:0 - -//U3D_FMMONR1 -#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 -#define RG_FRCK_EN (0x1<<8) //8:8 -#define USBPLL_LOCK (0x1<<1) //1:1 -#define USB_FM_VLD (0x1<<0) //0:0 - - -/* OFFSET */ - -//U3D_FMCR0 -#define RG_LOCKTH_OFST (28) -#define RG_MONCLK_SEL_OFST (26) -#define RG_FM_MODE_OFST (25) -#define RG_FREQDET_EN_OFST (24) -#define RG_CYCLECNT_OFST (0) - -//U3D_FMCR1 -#define RG_TARGET_OFST (0) - -//U3D_FMCR2 -#define RG_OFFSET_OFST (0) - -//U3D_FMMONR0 -#define USB_FM_OUT_OFST (0) - -//U3D_FMMONR1 -#define RG_MONCLK_SEL_3_OFST (9) -#define RG_FRCK_EN_OFST (8) -#define USBPLL_LOCK_OFST (1) -#define USB_FM_VLD_OFST (0) - - -/////////////////////////////////////////////////////////////////////////////// - -PHY_INT32 phy_init(struct u3phy_info *info); -PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); -PHY_INT32 eyescan_init(struct u3phy_info *info); -PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y - , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); -PHY_INT32 u2_save_cur_en(struct u3phy_info *info); -PHY_INT32 u2_save_cur_re(struct u3phy_info *info); -PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); - -#endif -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c deleted file mode 100644 index ebaf7c8b15..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy-ahb.c +++ /dev/null @@ -1,58 +0,0 @@ -#include "mtk-phy.h" -#ifdef CONFIG_U3D_HAL_SUPPORT -#include "mu3d_hal_osal.h" -#endif - -#ifdef CONFIG_U3_PHY_AHB_SUPPORT -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> - -#ifndef CONFIG_U3D_HAL_SUPPORT -#define os_writel(addr,data) {\ - (*((volatile PHY_UINT32*)(addr)) = data);\ - } -#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) -#define os_writelmsk(addr, data, msk) \ - { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ - } -#define os_setmsk(addr, msk) \ - { os_writel(addr, os_readl(addr) | msk); \ - } -#define os_clrmsk(addr, msk) \ - { os_writel(addr, os_readl(addr) &~ msk); \ - } -/*msk the data first, then umsk with the umsk.*/ -#define os_writelmskumsk(addr, data, msk, umsk) \ -{\ - os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ -} - -#endif - -PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) -{ - os_writel(addr, data); - - return 0; -} - -PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) -{ - return os_readl(addr); -} - -PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) -{ - os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); - - return 0; -} - -PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) -{ - return ((os_readl(addr)>>((addr%4)*8))&0xff); -} - -#endif - diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.c b/target/linux/ramips/files/drivers/usb/host/mtk-phy.c deleted file mode 100644 index 7ed8f015b8..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy.c +++ /dev/null @@ -1,102 +0,0 @@ -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#define U3_PHY_LIB -#include "mtk-phy.h" -#ifdef CONFIG_PROJECT_7621 -#include "mtk-phy-7621.h" -#endif -#ifdef CONFIG_PROJECT_PHY -static struct u3phy_operator project_operators = { - .init = phy_init, - .change_pipe_phase = phy_change_pipe_phase, - .eyescan_init = eyescan_init, - .eyescan = phy_eyescan, - .u2_slew_rate_calibration = u2_slew_rate_calibration, -}; -#endif - - -PHY_INT32 u3phy_init(){ -#ifndef CONFIG_PROJECT_PHY - PHY_INT32 u3phy_version; -#endif - - if(u3phy != NULL){ - return PHY_TRUE; - } - - u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); -#endif -#ifdef CONFIG_U3_PHY_GPIO_SUPPORT - u3phy->phyd_version_addr = 0x2000e4; -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->phyd_version_addr = 0x2000e4; -#endif -#else - u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; -#endif -#endif - -#ifdef CONFIG_PROJECT_PHY - - u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; - u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; - u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; - u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; - u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; - u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; - u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; - u3phy_ops = &project_operators; - -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; - u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; - u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; - u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; - u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; - u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; - u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; -#endif -#endif - - return PHY_TRUE; -} - -PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ - PHY_INT8 cur_value; - PHY_INT8 new_value; - - cur_value = U3PhyReadReg8(addr); - new_value = (cur_value & (~mask)) | (value << offset); - //udelay(i2cdelayus); - U3PhyWriteReg8(addr, new_value); - return PHY_TRUE; -} - -PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ - PHY_INT32 cur_value; - PHY_INT32 new_value; - - cur_value = U3PhyReadReg32(addr); - new_value = (cur_value & (~mask)) | ((value << offset) & mask); - U3PhyWriteReg32(addr, new_value); - //DRV_MDELAY(100); - - return PHY_TRUE; -} - -PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ - - return ((U3PhyReadReg8(addr) & mask) >> offset); -} - -PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ - - return ((U3PhyReadReg32(addr) & mask) >> offset); -} - diff --git a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h b/target/linux/ramips/files/drivers/usb/host/mtk-phy.h deleted file mode 100644 index 07ed410412..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/mtk-phy.h +++ /dev/null @@ -1,179 +0,0 @@ -#ifndef __MTK_PHY_NEW_H -#define __MTK_PHY_NEW_H - -//#define CONFIG_U3D_HAL_SUPPORT - -/* include system library */ -#include <linux/gfp.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/delay.h> - -/* Choose PHY R/W implementation */ -//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO -#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC - -/* Choose PHY version */ -//Select your project by defining one of the followings -#define CONFIG_PROJECT_7621 //7621 -#define CONFIG_PROJECT_PHY - -/* BASE ADDRESS DEFINE, should define this on ASIC */ -#define PHY_BASE 0xBE1D0000 -#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) -#define U2_PHY_BASE (PHY_BASE+0x800) -#define U3_PHYD_BASE (PHY_BASE+0x900) -#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) -#define U3_PHYA_BASE (PHY_BASE+0xb00) -#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) - -#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) -#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) -#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) -#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) -#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) -#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) -#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) -#endif - -/* - -0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg -0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc -0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 -0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 -0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 -0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 -0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 -*/ - - -/* TYPE DEFINE */ -typedef unsigned int PHY_UINT32; -typedef int PHY_INT32; -typedef unsigned short PHY_UINT16; -typedef short PHY_INT16; -typedef unsigned char PHY_UINT8; -typedef char PHY_INT8; - -typedef PHY_UINT32 __bitwise PHY_LE32; - -/* CONSTANT DEFINE */ -#define PHY_FALSE 0 -#define PHY_TRUE 1 - -/* MACRO DEFINE */ -#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) -#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) - -#define DRV_MDELAY mdelay -#define DRV_MSLEEP msleep -#define DRV_UDELAY udelay -#define DRV_USLEEP usleep - -/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ -PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); -PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); -PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); -PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); - -/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ -PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); -PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); -PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); - -struct u3phy_info { - PHY_INT32 phy_version; - PHY_INT32 phyd_version_addr; - -#ifdef CONFIG_PROJECT_PHY - struct u2phy_reg *u2phy_regs; - struct u3phya_reg *u3phya_regs; - struct u3phya_da_reg *u3phya_da_regs; - struct u3phyd_reg *u3phyd_regs; - struct u3phyd_bank2_reg *u3phyd_bank2_regs; - struct sifslv_chip_reg *sifslv_chip_regs; - struct sifslv_fm_feg *sifslv_fm_regs; -#endif -}; - -struct u3phy_operator { - PHY_INT32 (*init) (struct u3phy_info *info); - PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); - PHY_INT32 (*eyescan_init) (struct u3phy_info *info); - PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); - PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); - PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); - PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); -}; - -#ifdef U3_PHY_LIB -#define AUTOEXT -#else -#define AUTOEXT extern -#endif - -AUTOEXT struct u3phy_info *u3phy; -AUTOEXT struct u3phy_info *u3phy_p1; -AUTOEXT struct u3phy_operator *u3phy_ops; - -/*********eye scan required*********/ - -#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) -#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) - -typedef enum -{ - SCAN_UP, - SCAN_DN -} enumScanDir; - -struct strucScanRegion -{ - PHY_INT8 bX_tl; - PHY_INT8 bY_tl; - PHY_INT8 bX_br; - PHY_INT8 bY_br; - PHY_INT8 bDeltaX; - PHY_INT8 bDeltaY; -}; - -struct strucTestCycle -{ - PHY_UINT16 wEyeCnt; - PHY_INT8 bNumOfEyeCnt; - PHY_INT8 bPICalEn; - PHY_INT8 bNumOfIgnoreCnt; -}; - -#define ERRCNT_MAX 128 -#define CYCLE_COUNT_MAX 15 - -/// the map resolution is 128 x 128 pts -#define MAX_X 127 -#define MAX_Y 127 -#define MIN_X 0 -#define MIN_Y 0 - -PHY_INT32 u3phy_init(void); - -AUTOEXT struct strucScanRegion _rEye1; -AUTOEXT struct strucScanRegion _rEye2; -AUTOEXT struct strucTestCycle _rTestCycle; -AUTOEXT PHY_UINT8 _bXcurr; -AUTOEXT PHY_UINT8 _bYcurr; -AUTOEXT enumScanDir _eScanDir; -AUTOEXT PHY_INT8 _fgXChged; -AUTOEXT PHY_INT8 _bPIResult; -/* use local variable instead to save memory use */ -#if 0 -AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; -#endif - -/***********************************/ -#endif - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c deleted file mode 100644 index 9d9352678e..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.c +++ /dev/null @@ -1,115 +0,0 @@ -#include "xhci-mtk.h" -#include "xhci-mtk-power.h" -#include "xhci.h" -#include <linux/kernel.h> /* printk() */ -#include <linux/slab.h> -#include <linux/delay.h> - -static int g_num_u3_port; -static int g_num_u2_port; - - -void enableXhciAllPortPower(struct xhci_hcd *xhci){ - int i; - u32 port_id, temp; - u32 __iomem *addr; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - for(i=1; i<=g_num_u3_port; i++){ - port_id=i; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_POWER; - xhci_writel(xhci, temp, addr); - } - for(i=1; i<=g_num_u2_port; i++){ - port_id=i+g_num_u3_port; - addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); - temp = xhci_readl(xhci, addr); - temp = xhci_port_state_to_neutral(temp); - temp |= PORT_POWER; - xhci_writel(xhci, temp, addr); - } -} - -void enableAllClockPower(){ - - int i; - u32 temp; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - //2. Enable xHC - writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); - writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); - writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); - - //1. Enable target ports - for(i=0; i<g_num_u3_port; i++){ - temp = readl(SSUSB_U3_CTRL(i)); - temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS); - writel(temp, SSUSB_U3_CTRL(i)); - } - for(i=0; i<g_num_u2_port; i++){ - temp = readl(SSUSB_U2_CTRL(i)); - temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS); - writel(temp, SSUSB_U2_CTRL(i)); - } - msleep(100); -} - - -//(X)disable clock/power of a port -//(X)if all ports are disabled, disable IP ctrl power -//disable all ports and IP clock/power, this is just mention HW that the power/clock of port -//and IP could be disable if suspended. -//If doesn't not disable all ports at first, the IP clock/power will never be disabled -//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time -//port_index: port number -//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) -void disablePortClockPower(void){ - int i; - u32 temp; - - g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); - g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); - - for(i=0; i<g_num_u3_port; i++){ - temp = readl(SSUSB_U3_CTRL(i)); - temp = temp | (SSUSB_U3_PORT_PDN); - writel(temp, SSUSB_U3_CTRL(i)); - } - for(i=0; i<g_num_u2_port; i++){ - temp = readl(SSUSB_U2_CTRL(i)); - temp = temp | (SSUSB_U2_PORT_PDN); - writel(temp, SSUSB_U2_CTRL(i)); - } - writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); -} - -//if IP ctrl power is disabled, enable it -//enable clock/power of a port -//port_index: port number -//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) -void enablePortClockPower(int port_index, int port_rev){ - int i; - u32 temp; - - writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); - - if(port_rev == 0x3){ - temp = readl(SSUSB_U3_CTRL(port_index)); - temp = temp & (~SSUSB_U3_PORT_PDN); - writel(temp, SSUSB_U3_CTRL(port_index)); - } - else if(port_rev == 0x2){ - temp = readl(SSUSB_U2_CTRL(port_index)); - temp = temp & (~SSUSB_U2_PORT_PDN); - writel(temp, SSUSB_U2_CTRL(port_index)); - } -} - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h deleted file mode 100644 index e57c243f56..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-power.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _XHCI_MTK_POWER_H -#define _XHCI_MTK_POWER_H - -#include <linux/usb.h> -#include "xhci.h" -#include "xhci-mtk.h" - -void enableXhciAllPortPower(struct xhci_hcd *xhci); -void enableAllClockPower(void); -void disablePortClockPower(void); -void enablePortClockPower(int port_index, int port_rev); - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c deleted file mode 100644 index bf6a8bdc19..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.c +++ /dev/null @@ -1,608 +0,0 @@ -#include "xhci-mtk-scheduler.h" -#include <linux/kernel.h> /* printk() */ - -static struct sch_ep **ss_out_eps[MAX_EP_NUM]; -static struct sch_ep **ss_in_eps[MAX_EP_NUM]; -static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc -static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; - - -int mtk_xhci_scheduler_init(void){ - int i; - - for(i=0; i<MAX_EP_NUM; i++){ - ss_out_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - ss_in_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - hs_eps[i] = NULL; - } - for(i=0; i<MAX_EP_NUM; i++){ - tt_intr_eps[i] = NULL; - } - return 0; -} - -int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode - , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){ - - struct sch_ep **ep_array; - int i; - - if(is_in && dev_speed == USB_SPEED_SUPER ){ - ep_array = (struct sch_ep **)ss_in_eps; - } - else if(dev_speed == USB_SPEED_SUPER){ - ep_array = (struct sch_ep **)ss_out_eps; - } - else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){ - ep_array = (struct sch_ep **)hs_eps; - } - else{ - ep_array = (struct sch_ep **)tt_intr_eps; - } - for(i=0; i<MAX_EP_NUM; i++){ - if(ep_array[i] == NULL){ - tmp_ep->dev_speed = dev_speed; - tmp_ep->isTT = isTT; - tmp_ep->is_in = is_in; - tmp_ep->ep_type = ep_type; - tmp_ep->maxp = maxp; - tmp_ep->interval = interval; - tmp_ep->burst = burst; - tmp_ep->mult = mult; - tmp_ep->offset = offset; - tmp_ep->repeat = repeat; - tmp_ep->pkts = pkts; - tmp_ep->cs_count = cs_count; - tmp_ep->burst_mode = burst_mode; - tmp_ep->bw_cost = bw_cost; - tmp_ep->ep = ep; - ep_array[i] = tmp_ep; - return SCH_SUCCESS; - } - } - return SCH_FAIL; -} - -int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat - , int td_size){ - int i, j, k; - int bw_required[3]; - int final_bw_required; - int bw_required_per_repeat; - int tmp_bw_required; - struct sch_ep *cur_sch_ep; - struct sch_ep **ep_array; - int cur_offset; - int cur_ep_offset; - int tmp_offset; - int tmp_interval; - int ep_offset; - int ep_interval; - int ep_repeat; - int ep_mult; - - if(is_in){ - ep_array = (struct sch_ep **)ss_in_eps; - } - else{ - ep_array = (struct sch_ep **)ss_out_eps; - } - - bw_required[0] = 0; - bw_required[1] = 0; - bw_required[2] = 0; - - if(repeat == 0){ - final_bw_required = 0; - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = ep_array[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_interval = cur_sch_ep->interval; - ep_offset = cur_sch_ep->offset; - if(cur_sch_ep->repeat == 0){ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - final_bw_required += cur_sch_ep->bw_cost; - } - } - else{ - ep_repeat = cur_sch_ep->repeat; - ep_mult = cur_sch_ep->mult; - for(k=0; k<=ep_mult; k++){ - cur_ep_offset = ep_offset+(k*ep_mult); - if(ep_interval >= interval){ - tmp_offset = cur_ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - cur_ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - final_bw_required += cur_sch_ep->bw_cost; - break; - } - } - } - } - final_bw_required += td_size; - } - else{ - bw_required_per_repeat = maxp * (burst+1); - for(j=0; j<=mult; j++){ - tmp_bw_required = 0; - cur_offset = offset+(j*repeat); - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = ep_array[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_interval = cur_sch_ep->interval; - ep_offset = cur_sch_ep->offset; - if(cur_sch_ep->repeat == 0){ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - cur_offset; - tmp_interval = interval; - } - else{ - tmp_offset = cur_offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - tmp_bw_required += cur_sch_ep->bw_cost; - } - } - else{ - ep_repeat = cur_sch_ep->repeat; - ep_mult = cur_sch_ep->mult; - for(k=0; k<=ep_mult; k++){ - cur_ep_offset = ep_offset+(k*ep_repeat); - if(ep_interval >= interval){ - tmp_offset = cur_ep_offset + ep_interval - cur_offset; - tmp_interval = interval; - } - else{ - tmp_offset = cur_offset + interval - cur_ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset % tmp_interval == 0){ - tmp_bw_required += cur_sch_ep->bw_cost; - break; - } - } - } - } - bw_required[j] = tmp_bw_required; - } - final_bw_required = SS_BW_BOUND; - for(j=0; j<=mult; j++){ - if(bw_required[j] < final_bw_required){ - final_bw_required = bw_required[j]; - } - } - final_bw_required += bw_required_per_repeat; - } - return final_bw_required; -} - -int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ - int i; - int bw_required; - struct sch_ep *cur_sch_ep; - int tmp_offset; - int tmp_interval; - int ep_offset; - int ep_interval; - int cur_tt_isoc_interval; //for isoc tt check - - bw_required = 0; - for(i=0; i<MAX_EP_NUM; i++){ - - cur_sch_ep = (struct sch_ep *)hs_eps[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - - if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ - cur_tt_isoc_interval = ep_interval<<3; - if(ep_interval >= interval){ - tmp_offset = ep_offset + cur_tt_isoc_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = cur_tt_isoc_interval; - } - if(cur_sch_ep->is_in){ - if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ - bw_required += 188; - } - } - else{ - if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ - bw_required += 188; - } - } - } - else{ - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - offset; - tmp_interval = interval; - } - else{ - tmp_offset = offset + interval - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset%tmp_interval == 0){ - bw_required += cur_sch_ep->bw_cost; - } - } - } - bw_required += td_size; - return bw_required; -} - -int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ - char is_cs; - int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; - int bw_required, max_bw; - int ss_cs_count; - int cs_mframe; - int max_frame; - int i,j; - struct sch_ep *cur_sch_ep; - int ep_offset; - int ep_interval; - int ep_cs_count; - int tt_isoc_interval; //for isoc tt check - int cur_tt_isoc_interval; //for isoc tt check - int tmp_offset; - int tmp_interval; - - is_cs = 0; - - tt_isoc_interval = interval<<3; //frame to mframe - if(is_in){ - is_cs = 1; - } - s_frame = offset/8; - s_mframe = offset%8; - ss_cs_count = (maxp + (188 - 1))/188; - if(is_cs){ - cs_mframe = offset%8 + 2 + ss_cs_count; - if (cs_mframe <= 6) - ss_cs_count += 2; - else if (cs_mframe == 7) - ss_cs_count++; - else if (cs_mframe > 8) - return -1; - } - max_bw = 0; - if(is_in){ - i=2; - } - for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){ - bw_required = 0; - for(j=0; j<MAX_EP_NUM; j++){ - cur_sch_ep = (struct sch_ep *)hs_eps[j]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ - //isoc tt - //check if mframe offset overlap - //if overlap, add 188 to the bw - cur_tt_isoc_interval = ep_interval<<3; - if(cur_tt_isoc_interval >= tt_isoc_interval){ - tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; - tmp_interval = tt_isoc_interval; - } - else{ - tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; - tmp_interval = cur_tt_isoc_interval; - } - if(cur_sch_ep->is_in){ - if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ - bw_required += 188; - } - } - else{ - if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ - bw_required += 188; - } - } - - } - else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ - //check if mframe - if(ep_interval >= tt_isoc_interval){ - tmp_offset = (ep_offset+ep_interval) - cur_mframe; - tmp_interval = tt_isoc_interval; - } - else{ - tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; - tmp_interval = ep_interval; - } - if(tmp_offset%tmp_interval == 0){ - bw_required += cur_sch_ep->bw_cost; - } - } - } - bw_required += 188; - if(bw_required > max_bw){ - max_bw = bw_required; - } - } - return max_bw; -} - -int count_tt_intr_bw(int interval, int frame_offset){ - //check all eps in tt_intr_eps - int ret; - int i,j; - int ep_offset; - int ep_interval; - int tmp_offset; - int tmp_interval; - ret = SCH_SUCCESS; - struct sch_ep *cur_sch_ep; - - for(i=0; i<MAX_EP_NUM; i++){ - cur_sch_ep = (struct sch_ep *)tt_intr_eps[i]; - if(cur_sch_ep == NULL){ - continue; - } - ep_offset = cur_sch_ep->offset; - ep_interval = cur_sch_ep->interval; - if(ep_interval >= interval){ - tmp_offset = ep_offset + ep_interval - frame_offset; - tmp_interval = interval; - } - else{ - tmp_offset = frame_offset + interval - ep_offset; - tmp_interval = ep_interval; - } - - if(tmp_offset%tmp_interval==0){ - return SCH_FAIL; - } - } - return SCH_SUCCESS; -} - -struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ - int i; - struct sch_ep **ep_array; - struct sch_ep *cur_ep; - - if (is_in && dev_speed == USB_SPEED_SUPER) { - ep_array = (struct sch_ep **)ss_in_eps; - } - else if (dev_speed == USB_SPEED_SUPER) { - ep_array = (struct sch_ep **)ss_out_eps; - } - else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { - ep_array = (struct sch_ep **)hs_eps; - } - else { - ep_array = (struct sch_ep **)tt_intr_eps; - } - for (i = 0; i < MAX_EP_NUM; i++) { - cur_ep = (struct sch_ep *)ep_array[i]; - if(cur_ep != NULL && cur_ep->ep == ep){ - ep_array[i] = NULL; - return cur_ep; - } - } - return NULL; -} - -int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ - mtk_u32 bPkts = 0; - mtk_u32 bCsCount = 0; - mtk_u32 bBm = 1; - mtk_u32 bOffset = 0; - mtk_u32 bRepeat = 0; - int ret; - struct mtk_xhci_ep_ctx *temp_ep_ctx; - int td_size; - int mframe_idx, frame_idx; - int bw_cost; - int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; - int cur_offset, cs_mframe; - int break_out; - int frame_interval; - - printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp - , interval, burst, mult, ep, ep_ctx, sch_ep); - if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ - frame_interval = interval >> 3; - for(frame_idx=0; frame_idx<frame_interval; frame_idx++){ - printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx); - if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){ - printk(KERN_ERR "check OK............\n"); - bOffset = frame_idx<<3; - bPkts = 1; - bCsCount = 3; - bw_cost = maxp; - bRepeat = 0; - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - break; - } - } - } - else if(isTT && ep_type == USB_EP_ISOC){ - best_bw = HS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp; - break_out = 0; - frame_interval = interval>>3; - for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){ - for(mframe_idx=0; mframe_idx<8; mframe_idx++){ - cur_offset = (frame_idx*8) + mframe_idx; - cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = cur_offset; - best_bw = cur_bw; - if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ - break_out = 1; - break; - } - } - } - } - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bPkts = 1; - bCsCount = (maxp + (188 - 1)) / 188; - if(is_in){ - cs_mframe = bOffset%8 + 2 + bCsCount; - if (cs_mframe <= 6) - bCsCount += 2; - else if (cs_mframe == 7) - bCsCount++; - } - bw_cost = 188; - bRepeat = 0; - if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ - bPkts = 1; - ret = SCH_SUCCESS; - } - else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ - bPkts = 1; - ret = SCH_SUCCESS; - } - else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ - best_bw = HS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp*(burst+1); - for(cur_offset = 0; cur_offset<interval; cur_offset++){ - cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = cur_offset; - best_bw = cur_bw; - if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ - break; - } - } - } - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bPkts = burst + 1; - bCsCount = 0; - bw_cost = td_size; - bRepeat = 0; - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ - best_bw = SS_BW_BOUND; - best_bw_idx = -1; - cur_bw = 0; - td_size = maxp * (mult+1) * (burst+1); - if(mult == 0){ - max_repeat = 0; - } - else{ - max_repeat = (interval-1)/(mult+1); - } - break_out = 0; - for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ - for(repeat = max_repeat; repeat >= 0; repeat--){ - cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx - , repeat, td_size); - printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" - , frame_idx, repeat, td_size, cur_bw); - if(cur_bw > 0 && cur_bw < best_bw){ - best_bw_idx = frame_idx; - best_bw_repeat = repeat; - best_bw = cur_bw; - if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ - break_out = 1; - break; - } - } - } - } - printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); - if(best_bw_idx == -1){ - return SCH_FAIL; - } - else{ - bOffset = best_bw_idx; - bCsCount = 0; - bRepeat = best_bw_repeat; - if(bRepeat == 0){ - bw_cost = (burst+1)*(mult+1)*maxp; - bPkts = (burst+1)*(mult+1); - } - else{ - bw_cost = (burst+1)*maxp; - bPkts = (burst+1); - } - if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult - , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ - return SCH_FAIL; - } - ret = SCH_SUCCESS; - } - } - else{ - bPkts = 1; - ret = SCH_SUCCESS; - } - if(ret == SCH_SUCCESS){ - temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; - temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); - temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); - - printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); - printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); - return SCH_SUCCESS; - } - else{ - return SCH_FAIL; - } -} diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h deleted file mode 100644 index c55dfb10da..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk-scheduler.h +++ /dev/null @@ -1,77 +0,0 @@ -#ifndef _XHCI_MTK_SCHEDULER_H -#define _XHCI_MTK_SCHEDULER_H - -#define MTK_SCH_NEW 1 - -#define SCH_SUCCESS 1 -#define SCH_FAIL 0 - -#define MAX_EP_NUM 64 -#define SS_BW_BOUND 51000 -#define HS_BW_BOUND 6144 - -#define USB_EP_CONTROL 0 -#define USB_EP_ISOC 1 -#define USB_EP_BULK 2 -#define USB_EP_INT 3 - -#define USB_SPEED_LOW 1 -#define USB_SPEED_FULL 2 -#define USB_SPEED_HIGH 3 -#define USB_SPEED_SUPER 5 - -/* mtk scheduler bitmasks */ -#define BPKTS(p) ((p) & 0x3f) -#define BCSCOUNT(p) (((p) & 0x7) << 8) -#define BBM(p) ((p) << 11) -#define BOFFSET(p) ((p) & 0x3fff) -#define BREPEAT(p) (((p) & 0x7fff) << 16) - - -#if 1 -typedef unsigned int mtk_u32; -typedef unsigned long long mtk_u64; -#endif - -#define NULL ((void *)0) - -struct mtk_xhci_ep_ctx { - mtk_u32 ep_info; - mtk_u32 ep_info2; - mtk_u64 deq; - mtk_u32 tx_info; - /* offset 0x14 - 0x1f reserved for HC internal use */ - mtk_u32 reserved[3]; -}; - - -struct sch_ep -{ - //device info - int dev_speed; - int isTT; - //ep info - int is_in; - int ep_type; - int maxp; - int interval; - int burst; - int mult; - //scheduling info - int offset; - int repeat; - int pkts; - int cs_count; - int burst_mode; - //other - int bw_cost; //bandwidth cost in each repeat; including overhead - mtk_u32 *ep; //address of usb_endpoint pointer -}; - -int mtk_xhci_scheduler_init(void); -int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst - , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); -struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); - - -#endif diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c deleted file mode 100644 index 2eed0a174a..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.c +++ /dev/null @@ -1,265 +0,0 @@ -#include "xhci-mtk.h" -#include "xhci-mtk-power.h" -#include "xhci.h" -#include "mtk-phy.h" -#ifdef CONFIG_C60802_SUPPORT -#include "mtk-phy-c60802.h" -#endif -#include "xhci-mtk-scheduler.h" -#include <linux/kernel.h> /* printk() */ -#include <linux/slab.h> -#include <linux/delay.h> -#include <asm/uaccess.h> -#include <linux/dma-mapping.h> -#include <linux/platform_device.h> - -void setInitialReg(void ) -{ - __u32 __iomem *addr; - u32 temp; - - /* set SSUSB DMA burst size to 128B */ - addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; - temp = SSUSB_HDMA_CFG_MT7621_VALUE; - writel(temp, addr); - - /* extend U3 LTSSM Polling.LFPS timeout value */ - addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; - temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; - writel(temp, addr); - - /* EOF */ - addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; - temp = SYNC_HS_EOF_VALUE; - writel(temp, addr); - -#if defined (CONFIG_PERIODIC_ENP) - /* HSCH_CFG1: SCH2_FIFO_DEPTH */ - addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; - temp = readl(addr); - temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); - writel(temp, addr); -#endif - - /* Doorbell handling */ - addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; - temp = 0x1; - writel(temp, addr); - - /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ - /* Port 0 */ - addr = U2_PHY_BASE + U2_PHYD_CR1; - temp = readl(addr); - temp &= ~(0x3 << 18); - temp |= (1 << 18); - writel(temp, addr); - - /* Port 1 */ - addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; - temp = readl(addr); - temp &= ~(0x3 << 18); - temp |= (1 << 18); - writel(temp, addr); -} - - -void setLatchSel(void){ - __u32 __iomem *latch_sel_addr; - u32 latch_sel_value; - latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; - latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); - writel(latch_sel_value, latch_sel_addr); -} - -void reinitIP(void){ - __u32 __iomem *ip_reset_addr; - u32 ip_reset_value; - - enableAllClockPower(); - mtk_xhci_scheduler_init(); -} - -void dbg_prb_out(void){ - mtk_probe_init(0x0f0f0f0f); - mtk_probe_out(0xffffffff); - mtk_probe_out(0x01010101); - mtk_probe_out(0x02020202); - mtk_probe_out(0x04040404); - mtk_probe_out(0x08080808); - mtk_probe_out(0x10101010); - mtk_probe_out(0x20202020); - mtk_probe_out(0x40404040); - mtk_probe_out(0x80808080); - mtk_probe_out(0x55555555); - mtk_probe_out(0xaaaaaaaa); -} - - - -/////////////////////////////////////////////////////////////////////////////// - -#define RET_SUCCESS 0 -#define RET_FAIL 1 - -static int dbg_u3w(int argc, char**argv) -{ - int u4TimingValue; - char u1TimingValue; - int u4TimingAddress; - - if (argc<3) - { - printk(KERN_ERR "Arg: address value\n"); - return RET_FAIL; - } - u3phy_init(); - - u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); - u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); - u1TimingValue = u4TimingValue & 0xff; - /* access MMIO directly */ - writel(u1TimingValue, u4TimingAddress); - printk(KERN_ERR "Write done\n"); - return RET_SUCCESS; - -} - -static int dbg_u3r(int argc, char**argv) -{ - char u1ReadTimingValue; - int u4TimingAddress; - if (argc<2) - { - printk(KERN_ERR "Arg: address\n"); - return 0; - } - u3phy_init(); - mdelay(500); - u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); - /* access MMIO directly */ - u1ReadTimingValue = readl(u4TimingAddress); - printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); - return 0; -} - -static int dbg_u3init(int argc, char**argv) -{ - int ret; - ret = u3phy_init(); - printk(KERN_ERR "phy registers and operations initial done\n"); - if(u3phy_ops->u2_slew_rate_calibration){ - u3phy_ops->u2_slew_rate_calibration(u3phy); - } - else{ - printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); - } - if(u3phy_ops->init(u3phy) == PHY_TRUE) - return RET_SUCCESS; - return RET_FAIL; -} - -void dbg_setU1U2(int argc, char**argv){ - struct xhci_hcd *xhci; - int u1_value; - int u2_value; - u32 port_id, temp; - u32 __iomem *addr; - - if (argc<3) - { - printk(KERN_ERR "Arg: u1value u2value\n"); - return RET_FAIL; - } - - u1_value = (int)simple_strtol(argv[1], &argv[1], 10); - u2_value = (int)simple_strtol(argv[2], &argv[2], 10); - addr = (SSUSB_U3_XHCI_BASE + 0x424); - temp = readl(addr); - temp = temp & (~(0x0000ffff)); - temp = temp | u1_value | (u2_value<<8); - writel(temp, addr); -} -/////////////////////////////////////////////////////////////////////////////// - -int call_function(char *buf) -{ - int i; - int argc; - char *argv[80]; - - argc = 0; - do - { - argv[argc] = strsep(&buf, " "); - printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); - argc++; - } while (buf); - if (!strcmp("dbg.r", argv[0])) - dbg_prb_out(); - else if (!strcmp("dbg.u3w", argv[0])) - dbg_u3w(argc, argv); - else if (!strcmp("dbg.u3r", argv[0])) - dbg_u3r(argc, argv); - else if (!strcmp("dbg.u3i", argv[0])) - dbg_u3init(argc, argv); - else if (!strcmp("pw.u1u2", argv[0])) - dbg_setU1U2(argc, argv); - return 0; -} - -long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) -{ - char w_buf[200]; - char r_buf[200] = "this is a test"; - int len = 200; - - switch (cmd) { - case IOCTL_READ: - copy_to_user((char *) arg, r_buf, len); - printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); - break; - case IOCTL_WRITE: - copy_from_user(w_buf, (char *) arg, len); - printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); - - //invoke function - return call_function(w_buf); - break; - default: - return -ENOTTY; - } - - return len; -} - -int xhci_mtk_test_open(struct inode *inode, struct file *file) -{ - - printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); - return 0; -} - -int xhci_mtk_test_release(struct inode *inode, struct file *file) -{ - - printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); - return 0; -} - -ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) -{ - - printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); - return 0; -} - -ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) -{ - - printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); - return 0; -} - - - - diff --git a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h b/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h deleted file mode 100644 index 0f2d5e834c..0000000000 --- a/target/linux/ramips/files/drivers/usb/host/xhci-mtk.h +++ /dev/null @@ -1,120 +0,0 @@ -#ifndef _XHCI_MTK_H -#define _XHCI_MTK_H - -#include <linux/usb.h> -#include "xhci.h" - -#define SSUSB_U3_XHCI_BASE 0xBE1C0000 -#define SSUSB_U3_MAC_BASE 0xBE1C2400 -#define SSUSB_U3_SYS_BASE 0xBE1C2600 -#define SSUSB_U2_SYS_BASE 0xBE1C3400 -#define SSUB_SIF_SLV_TOP 0xBE1D0000 -#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) - -#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 -#define U3_PIPE_LATCH_TX 0 -#define U3_PIPE_LATCH_RX 0 - -#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 -#define U3_REF_CK_PAR 0xb0 -#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 -#define U3_RX_UX_EXIT_LFPS_REF 3 -#define U3_REF_CK_VAL 10 - -#define U3_TIMING_PULSE_CTRL 0xb4 -#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 - -#define USB20_TIMING_PARAMETER 0x40 -#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 - -#define LINK_PM_TIMER 0x8 -#define PM_LC_TIMEOUT_VALUE 3 - -#define XHCI_IMOD 0x624 -#define XHCI_IMOD_MT7621_VALUE 0x10 - -#define SSUSB_HDMA_CFG 0x950 -#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C - -#define U3_LTSSM_TIMING_PARAMETER3 0x2514 -#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C - -#define U2_PHYD_CR1 0x64 - -#define SSUSB_IP_SPAR0 0xC8 - -#define SYNC_HS_EOF 0x938 -#define SYNC_HS_EOF_VALUE 0x201F3 - -#define HSCH_CFG1 0x960 -#define SCH2_FIFO_DEPTH_OFFSET 16 - - -#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) -#define SSUSB_IP_SW_RST (1<<0) -#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) -#define SSUSB_IP_PDN (1<<0) -#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) -#define SSUSB_U3_PORT_DIS (1<<0) -#define SSUSB_U3_PORT_PDN (1<<1) -#define SSUSB_U3_PORT_HOST_SEL (1<<2) -#define SSUSB_U3_PORT_CKBG_EN (1<<3) -#define SSUSB_U3_PORT_MAC_RST (1<<4) -#define SSUSB_U3_PORT_PHYD_RST (1<<5) -#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) -#define SSUSB_U2_PORT_DIS (1<<0) -#define SSUSB_U2_PORT_PDN (1<<1) -#define SSUSB_U2_PORT_HOST_SEL (1<<2) -#define SSUSB_U2_PORT_CKBG_EN (1<<3) -#define SSUSB_U2_PORT_MAC_RST (1<<4) -#define SSUSB_U2_PORT_PHYD_RST (1<<5) -#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) - -#define SSUSB_U3_PORT_NUM(p) (p & 0xff) -#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) - - -#define XHCI_MTK_TEST_MAJOR 234 -#define DEVICE_NAME "xhci_mtk_test" - -#define CLI_MAGIC 'CLI' -#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) -#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) - -void reinitIP(void); -void setInitialReg(void); -void dbg_prb_out(void); -int call_function(char *buf); - -long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -int xhci_mtk_test_open(struct inode *inode, struct file *file); -int xhci_mtk_test_release(struct inode *inode, struct file *file); -ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); -ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); - -/* - mediatek probe out -*/ -/************************************************************************************/ - -#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) -#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) - -static inline void mtk_probe_init(const u32 byte){ - __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; - writel(byte, ptr); -} - -static inline void mtk_probe_out(const u32 value){ - __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; - writel(value, ptr); -} - -static inline u32 mtk_probe_value(void){ - __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; - - return readl(ptr); -} - - -#endif diff --git a/target/linux/ramips/mt7621/config-3.10 b/target/linux/ramips/mt7621/config-3.10 index 194bb4a1cc..86bc7bef4f 100644 --- a/target/linux/ramips/mt7621/config-3.10 +++ b/target/linux/ramips/mt7621/config-3.10 @@ -1,6 +1,8 @@ +# CONFIG_32B_DESC is not set CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_REQUIRE_GPIOLIB=y CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y @@ -35,6 +37,14 @@ CONFIG_DMA_NONCOHERENT=y CONFIG_DTB_RT_NONE=y CONFIG_DTC=y CONFIG_EARLY_PRINTK=y +CONFIG_ESW_DOUBLE_VLAN_TAG=y +# CONFIG_GE1_MII_AN is not set +# CONFIG_GE1_MII_FORCE_100 is not set +# CONFIG_GE1_RGMII_AN is not set +CONFIG_GE1_RGMII_FORCE_1000=y +# CONFIG_GE1_RGMII_NONE is not set +# CONFIG_GE1_RVMII_FORCE_100 is not set +# CONFIG_GE1_TRGMII_FORCE_1200 is not set CONFIG_GENERIC_ATOMIC64=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y @@ -88,6 +98,7 @@ CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_IRQ_GIC=y CONFIG_IRQ_WORK=y +# CONFIG_LAN_WAN_SUPPORT is not set CONFIG_M25PXX_USE_FAST_READ=y CONFIG_MDIO_BOARDINFO=y # CONFIG_MII is not set @@ -105,6 +116,7 @@ CONFIG_MIPS_MT_SMP=y CONFIG_MIPS_PERF_SHARED_TC_COUNTERS=y # CONFIG_MIPS_VPE_LOADER is not set CONFIG_MODULES_USE_ELF_REL=y +CONFIG_MT7621_ASIC=y # CONFIG_MT7621_WDT is not set # CONFIG_MTD_CFI_INTELEXT is not set CONFIG_MTD_CMDLINE_PARTS=y @@ -137,6 +149,7 @@ CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_PCI=y CONFIG_PCI_DISABLE_COMMON_QUIRKS=y CONFIG_PCI_DOMAINS=y +CONFIG_PDMA_NEW=y CONFIG_PERF_USE_VMALLOC=y CONFIG_PHYLIB=y # CONFIG_PINCONF is not set @@ -145,12 +158,30 @@ CONFIG_PINCTRL_RT2880=y # CONFIG_PINCTRL_SINGLE is not set CONFIG_PINMUX=y # CONFIG_PREEMPT_RCU is not set +CONFIG_RAETH=y +CONFIG_RAETH_CHECKSUM_OFFLOAD=y +# CONFIG_RAETH_GMAC2 is not set +# CONFIG_RAETH_HW_VLAN_RX is not set +# CONFIG_RAETH_HW_VLAN_TX is not set +# CONFIG_RAETH_LRO is not set +# CONFIG_RAETH_NAPI is not set +# CONFIG_RAETH_QDMA is not set +CONFIG_RAETH_SCATTER_GATHER_RX_DMA=y +# CONFIG_RAETH_SKB_RECYCLE_2K is not set +# CONFIG_RAETH_SPECIAL_TAG is not set +# CONFIG_RAETH_TSO is not set CONFIG_RALINK=y +CONFIG_RALINK_MT7621=y CONFIG_RALINK_USBPHY=y +# CONFIG_RALINK_WDT is not set +CONFIG_RA_NAT_NONE=y +# CONFIG_RA_NETWORK_TASKLET_BH is not set +CONFIG_RA_NETWORK_WORKQUEUE_BH=y CONFIG_RCU_STALL_COMMON=y CONFIG_RESET_CONTROLLER=y CONFIG_RFS_ACCEL=y CONFIG_RPS=y +CONFIG_RT_3052_ESW=y # CONFIG_SAMSUNG_USB2PHY is not set # CONFIG_SAMSUNG_USB3PHY is not set # CONFIG_SAMSUNG_USBPHY is not set @@ -199,6 +230,8 @@ CONFIG_USB_XHCI_HCD=m CONFIG_USB_XHCI_PLATFORM=y CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_USE_OF=y +CONFIG_WAN_AT_P0=y +# CONFIG_WAN_AT_P4 is not set CONFIG_WATCHDOG_CORE=y CONFIG_WEAK_ORDERING=y CONFIG_XPS=y diff --git a/target/linux/ramips/mt7621/profiles/00-default.mk b/target/linux/ramips/mt7621/profiles/00-default.mk index a905d1ed80..fb04ba788c 100644 --- a/target/linux/ramips/mt7621/profiles/00-default.mk +++ b/target/linux/ramips/mt7621/profiles/00-default.mk @@ -8,7 +8,7 @@ define Profile/Default NAME:=Default Profile PACKAGES:=\ - kmod-usb-core kmod-usb-dwc2 \ + kmod-usb-core kmod-usb3 \ kmod-ledtrig-usbdev endef diff --git a/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch b/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch index e87eb4d394..1d2e728cff 100644 --- a/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch +++ b/target/linux/ramips/patches-3.10/0100-MIPS-use-set_mode-to-enable-disable-the-cevt-r4k-irq.patch @@ -1,7 +1,7 @@ -From cdc1b12b3debaf5b3894fd146e73221a8acd0152 Mon Sep 17 00:00:00 2001 +From 1be15a87eea5f26fb24b6aac332530cd3e2d984e Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 14 Jul 2013 23:08:11 +0200 -Subject: [PATCH 20/25] MIPS: use set_mode() to enable/disable the cevt-r4k +Subject: [PATCH 100/133] MIPS: use set_mode() to enable/disable the cevt-r4k irq Signed-off-by: John Crispin <blogic@openwrt.org> @@ -24,13 +24,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org> DEFINE_PER_CPU(struct clock_event_device, mips_clockevent_device); int cp0_timer_irq_installed; -@@ -90,6 +84,32 @@ struct irqaction c0_compare_irqaction = +@@ -90,9 +84,38 @@ struct irqaction c0_compare_irqaction = .name = "timer", }; +void mips_set_clock_mode(enum clock_event_mode mode, + struct clock_event_device *evt) +{ ++#ifdef CONFIG_CEVT_SYSTICK_QUIRK + switch (mode) { + case CLOCK_EVT_MODE_ONESHOT: + if (cp0_timer_irq_installed) @@ -53,21 +54,27 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + pr_err("Unhandeled mips clock_mode\n"); + break; + } ++#endif +} void mips_event_handler(struct clock_event_device *dev) { -@@ -215,13 +235,6 @@ int __cpuinit r4k_clockevent_init(void) ++ + } + + /* +@@ -215,12 +238,14 @@ int __cpuinit r4k_clockevent_init(void) #endif clockevents_register_device(cd); -- if (cp0_timer_irq_installed) -- return 0; -- -- cp0_timer_irq_installed = 1; -- -- setup_irq(irq, &c0_compare_irqaction); -- ++#ifndef CONFIG_CEVT_SYSTICK_QUIRK + if (cp0_timer_irq_installed) + return 0; + + cp0_timer_irq_installed = 1; + + setup_irq(irq, &c0_compare_irqaction); ++#endif + return 0; } - diff --git a/target/linux/ramips/patches-3.10/0102-MIPS-ralink-add-verbose-pmu-info.patch b/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch index 687b883fe3..5a7d5f9997 100644 --- a/target/linux/ramips/patches-3.10/0102-MIPS-ralink-add-verbose-pmu-info.patch +++ b/target/linux/ramips/patches-3.10/0101-MIPS-ralink-add-verbose-pmu-info.patch @@ -1,7 +1,7 @@ -From 74339d6eab7a37f7c629b737bf686d30e5014ce2 Mon Sep 17 00:00:00 2001 +From 5689333e7e4396a827a2cb6fa1242159e9af56de Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 20 May 2013 20:57:09 +0200 -Subject: [PATCH 06/33] MIPS: ralink: add verbose pmu info +Subject: [PATCH 101/133] MIPS: ralink: add verbose pmu info Print the PMU and LDO settings on boot. diff --git a/target/linux/ramips/patches-3.10/0103-MIPS-ralink-adds-a-bootrom-dumper-module.patch b/target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch index c0910326c9..e295a4aa4d 100644 --- a/target/linux/ramips/patches-3.10/0103-MIPS-ralink-adds-a-bootrom-dumper-module.patch +++ b/target/linux/ramips/patches-3.10/0102-MIPS-ralink-adds-a-bootrom-dumper-module.patch @@ -1,7 +1,7 @@ -From 71409a190a0c8e3597cae7d46321742e29d8994b Mon Sep 17 00:00:00 2001 +From 23d18a1b3d0a7e5faa08b6bece6692667c930975 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Tue, 21 May 2013 15:50:31 +0200 -Subject: [PATCH 07/33] MIPS: ralink: adds a bootrom dumper module +Subject: [PATCH 102/133] MIPS: ralink: adds a bootrom dumper module This patch adds a trivial driver that allows userland to extract the bootrom of a SoC via debugfs. diff --git a/target/linux/ramips/patches-3.10/0104-MIPS-ralink-add-illegal-access-driver.patch b/target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch index 082c324531..4dfa7b5372 100644 --- a/target/linux/ramips/patches-3.10/0104-MIPS-ralink-add-illegal-access-driver.patch +++ b/target/linux/ramips/patches-3.10/0103-MIPS-ralink-add-illegal-access-driver.patch @@ -1,7 +1,7 @@ -From 46446fcfc6e823005ebe71357b5995524e75542c Mon Sep 17 00:00:00 2001 +From c5fe00f24f56b15f982dda355089986d57488b36 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Thu, 16 May 2013 23:28:23 +0200 -Subject: [PATCH 08/33] MIPS: ralink: add illegal access driver +Subject: [PATCH 103/133] MIPS: ralink: add illegal access driver Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0105-MIPS-ralink-workaround-DTB-memory-issue.patch b/target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch index 662b356304..c9a12b3676 100644 --- a/target/linux/ramips/patches-3.10/0105-MIPS-ralink-workaround-DTB-memory-issue.patch +++ b/target/linux/ramips/patches-3.10/0104-MIPS-ralink-workaround-DTB-memory-issue.patch @@ -1,7 +1,7 @@ -From 070a389ae536a75b9184784f625949c215c533b6 Mon Sep 17 00:00:00 2001 +From b83808826ac7a5c727f5314b5a3bf07fcd6ec929 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Thu, 23 May 2013 18:50:56 +0200 -Subject: [PATCH 09/33] MIPS: ralink: workaround DTB memory issue +Subject: [PATCH 104/133] MIPS: ralink: workaround DTB memory issue If the DTB is too big a bug happens on boot when init ram is freed. This is a temporary fix until the real cause is found. diff --git a/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch b/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch new file mode 100644 index 0000000000..e9b30e03e3 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0105-MIPS-ralink-add-missing-clk_set_rate-to-clk.c.patch @@ -0,0 +1,25 @@ +From 6f72aea69951479b7daad1d38b506ede4f8a1676 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:38:07 +0000 +Subject: [PATCH 105/133] MIPS: ralink: add missing clk_set_rate() to clk.c + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/clk.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/arch/mips/ralink/clk.c ++++ b/arch/mips/ralink/clk.c +@@ -56,6 +56,12 @@ unsigned long clk_get_rate(struct clk *c + } + EXPORT_SYMBOL_GPL(clk_get_rate); + ++int clk_set_rate(struct clk *clk, unsigned long rate) ++{ ++ return -1; ++} ++EXPORT_SYMBOL_GPL(clk_set_rate); ++ + void __init plat_time_init(void) + { + struct clk *clk; diff --git a/target/linux/ramips/patches-3.10/999-mt7620n.patch b/target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch index da5c6f9c7a..bb1ff7dc61 100644 --- a/target/linux/ramips/patches-3.10/999-mt7620n.patch +++ b/target/linux/ramips/patches-3.10/0106-MIPS-ralink-add-support-for-MT7620n.patch @@ -1,3 +1,16 @@ +From 45ba0675286e2a71f6a577833ab13b951bb7e31a Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:40:02 +0000 +Subject: [PATCH 106/133] MIPS: ralink: add support for MT7620n + +This is the small version of MT7620a. + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 7 ++----- + arch/mips/ralink/mt7620.c | 19 ++++++++++++------- + 2 files changed, 14 insertions(+), 12 deletions(-) + --- a/arch/mips/include/asm/mach-ralink/mt7620.h +++ b/arch/mips/include/asm/mach-ralink/mt7620.h @@ -24,11 +24,8 @@ @@ -16,7 +29,7 @@ #define CHIP_REV_PKG_SHIFT 16 --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c -@@ -167,22 +167,27 @@ void prom_soc_init(struct ralink_soc_inf +@@ -226,22 +226,27 @@ void prom_soc_init(struct ralink_soc_inf u32 cfg0; u32 pmu0; u32 pmu1; diff --git a/target/linux/ramips/patches-3.10/0106-USB-dwc2.patch b/target/linux/ramips/patches-3.10/0106-USB-dwc2.patch deleted file mode 100644 index 90e8ee5e6b..0000000000 --- a/target/linux/ramips/patches-3.10/0106-USB-dwc2.patch +++ /dev/null @@ -1,19 +0,0 @@ ---- a/drivers/staging/dwc2/hcd.c -+++ b/drivers/staging/dwc2/hcd.c -@@ -47,6 +47,7 @@ - #include <linux/io.h> - #include <linux/slab.h> - #include <linux/usb.h> -+#include <linux/reset.h> - - #include <linux/usb/hcd.h> - #include <linux/usb/ch11.h> -@@ -2712,6 +2713,8 @@ int dwc2_hcd_init(struct dwc2_hsotg *hso - - dev_dbg(hsotg->dev, "DWC OTG HCD INIT\n"); - -+ device_reset(hsotg->dev); -+ - /* - * Attempt to ensure this device is really a DWC_otg Controller. - * Read and verify the GSNPSID register contents. The value should be diff --git a/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch b/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch new file mode 100644 index 0000000000..4fb2b2be37 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0107-MIPS-ralink-allow-manual-memory-override.patch @@ -0,0 +1,45 @@ +From ee46d05eefefb0fb40b5682b4f6f3876b496044b Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:40:48 +0000 +Subject: [PATCH 107/133] MIPS: ralink: allow manual memory override + +RT5350 relies on the bootloader setting up the memc correctly. +On sme boards the setup is incorrect leading to 32 MB being available but only 16 being recognized. Allow these boards to manually override the memory range +. +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/of.c | 16 +++++++++++++++- + 1 file changed, 15 insertions(+), 1 deletion(-) + +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -77,6 +77,17 @@ void __init device_tree_init(void) + //free_bootmem(base, size); + } + ++static int memory_dtb; ++ ++static int __init early_init_dt_find_memory(unsigned long node, const char *uname, ++ int depth, void *data) ++{ ++ if (depth == 1 && !strcmp(uname, "memory@0")) ++ memory_dtb = 1; ++ ++ return 0; ++} ++ + void __init plat_mem_setup(void) + { + set_io_port_base(KSEG1); +@@ -87,7 +98,10 @@ void __init plat_mem_setup(void) + */ + __dt_setup_arch(&__dtb_start); + +- if (soc_info.mem_size) ++ of_scan_flat_dt(early_init_dt_find_memory, NULL); ++ if (memory_dtb) ++ of_scan_flat_dt(early_init_dt_scan_memory, NULL); ++ else if (soc_info.mem_size) + add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, + BOOT_MEM_RAM); + else diff --git a/target/linux/ramips/patches-3.10/0121-MIPS-ralink-add-rt_sysc_m32-helper.patch b/target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch index 915c5bed5c..6d9c0d3a5d 100644 --- a/target/linux/ramips/patches-3.10/0121-MIPS-ralink-add-rt_sysc_m32-helper.patch +++ b/target/linux/ramips/patches-3.10/0108-MIPS-ralink-add-rt_sysc_m32-helper.patch @@ -1,7 +1,7 @@ -From 3af962f91035ae4500e63c758c49f1c067bdae09 Mon Sep 17 00:00:00 2001 +From 1fe4d719d1c973c01f4b6a4c0de47bfac77e3eca Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 19 May 2013 00:42:23 +0200 -Subject: [PATCH 04/33] MIPS: ralink: add rt_sysc_m32 helper +Subject: [PATCH 108/133] MIPS: ralink: add rt_sysc_m32 helper Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0201-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch b/target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch index ee4d72fcb5..193374e91c 100644 --- a/target/linux/ramips/patches-3.10/0201-owrt-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on.patch +++ b/target/linux/ramips/patches-3.10/0109-MIPS-ralink-add-pseudo-pwm-led-trigger-based-on-time.patch @@ -1,8 +1,8 @@ -From daf08289dc0ac69af0d8293dacd5ca6291400593 Mon Sep 17 00:00:00 2001 +From ca21f813087ca5a8b02ec00efcd9c3f3fbf3bc1f Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 24 Mar 2013 17:17:17 +0100 -Subject: [PATCH 30/33] owrt: MIPS: ralink: add pseudo pwm led trigger based - on timer0 +Subject: [PATCH 109/133] MIPS: ralink: add pseudo pwm led trigger based on + timer0 Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch b/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch new file mode 100644 index 0000000000..7a646400c4 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0110-MIPS-ralink-add-a-helper-for-reading-the-ECO-version.patch @@ -0,0 +1,23 @@ +From f57edea9db0f7f437bc4f2ae408f6dd8bfbb9062 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:53:02 +0000 +Subject: [PATCH 110/133] MIPS: ralink: add a helper for reading the ECO + version + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/include/asm/mach-ralink/mt7620.h | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -79,4 +79,9 @@ + #define MT7620_GPIO_MODE_EPHY BIT(15) + #define MT7620_GPIO_MODE_WDT BIT(22) + ++static inline int mt7620_get_eco(void) ++{ ++ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK; ++} ++ + #endif diff --git a/target/linux/ramips/patches-3.10/0300-DMA-add-rt2880-dma-engine.patch b/target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch index 7bddcaf2f9..2aafd00d19 100644 --- a/target/linux/ramips/patches-3.10/0300-DMA-add-rt2880-dma-engine.patch +++ b/target/linux/ramips/patches-3.10/0111-DMA-ralink-add-rt2880-dma-engine.patch @@ -1,14 +1,16 @@ -From 776726ff626249276936a7e1f865103ea4e1b7e9 Mon Sep 17 00:00:00 2001 +From 2d7e32d4825e20e9db4f0dff6b3e3c25c8c7ad7d Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Tue, 3 Dec 2013 17:05:05 +0100 -Subject: [PATCH] DMA: add rt2880 dma engine +Subject: [PATCH 111/133] DMA: ralink: add rt2880 dma engine Signed-off-by: John Crispin <blogic@openwrt.org> --- drivers/dma/Kconfig | 6 + drivers/dma/Makefile | 1 + - drivers/dma/ralink-gdma.c | 596 +++++++++++++++++++++++++++++++++++++++++++++ - 3 files changed, 603 insertions(+) + drivers/dma/dmaengine.c | 26 ++ + drivers/dma/ralink-gdma.c | 577 +++++++++++++++++++++++++++++++++++++++++++++ + include/linux/dmaengine.h | 1 + + 5 files changed, 611 insertions(+) create mode 100644 drivers/dma/ralink-gdma.c --- a/drivers/dma/Kconfig @@ -26,6 +28,48 @@ Signed-off-by: John Crispin <blogic@openwrt.org> config DMA_ENGINE bool +--- a/drivers/dma/Makefile ++++ b/drivers/dma/Makefile +@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o + obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o + obj-$(CONFIG_DMA_OMAP) += omap-dma.o + obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o ++obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o +--- a/drivers/dma/dmaengine.c ++++ b/drivers/dma/dmaengine.c +@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat + } + + /** ++ * dma_request_slave_channel - try to get specific channel exclusively ++ * @chan: target channel ++ */ ++struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) ++{ ++ int err = -EBUSY; ++ ++ /* lock against __dma_request_channel */ ++ mutex_lock(&dma_list_mutex); ++ ++ if (chan->client_count == 0) { ++ err = dma_chan_get(chan); ++ if (err) ++ pr_debug("%s: failed to get %s: (%d)\n", ++ __func__, dma_chan_name(chan), err); ++ } else ++ chan = NULL; ++ ++ mutex_unlock(&dma_list_mutex); ++ ++ return chan; ++} ++EXPORT_SYMBOL_GPL(dma_get_slave_channel); ++ ++ ++/** + * dma_request_channel - try to allocate an exclusive channel + * @mask: capabilities that the channel must satisfy + * @fn: optional callback to disposition available channels --- /dev/null +++ b/drivers/dma/ralink-gdma.c @@ -0,0 +1,577 @@ @@ -606,41 +650,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>"); +MODULE_DESCRIPTION("GDMA4740 DMA driver"); +MODULE_LICENSE("GPLv2"); ---- a/drivers/dma/dmaengine.c -+++ b/drivers/dma/dmaengine.c -@@ -504,6 +504,32 @@ static struct dma_chan *private_candidat - } - - /** -+ * dma_request_slave_channel - try to get specific channel exclusively -+ * @chan: target channel -+ */ -+struct dma_chan *dma_get_slave_channel(struct dma_chan *chan) -+{ -+ int err = -EBUSY; -+ -+ /* lock against __dma_request_channel */ -+ mutex_lock(&dma_list_mutex); -+ -+ if (chan->client_count == 0) { -+ err = dma_chan_get(chan); -+ if (err) -+ pr_debug("%s: failed to get %s: (%d)\n", -+ __func__, dma_chan_name(chan), err); -+ } else -+ chan = NULL; -+ -+ mutex_unlock(&dma_list_mutex); -+ -+ return chan; -+} -+EXPORT_SYMBOL_GPL(dma_get_slave_channel); -+ -+ -+/** - * dma_request_channel - try to allocate an exclusive channel - * @mask: capabilities that the channel must satisfy - * @fn: optional callback to disposition available channels --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -999,6 +999,7 @@ static inline void dma_release_channel(s @@ -651,10 +660,3 @@ Signed-off-by: John Crispin <blogic@openwrt.org> struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); struct dma_chan *net_dma_find_channel(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) ---- a/drivers/dma/Makefile -+++ b/drivers/dma/Makefile -@@ -38,3 +38,4 @@ obj-$(CONFIG_DMA_SA11X0) += sa11x0-dma.o - obj-$(CONFIG_MMP_TDMA) += mmp_tdma.o - obj-$(CONFIG_DMA_OMAP) += omap-dma.o - obj-$(CONFIG_MMP_PDMA) += mmp_pdma.o -+obj-$(CONFIG_DMA_RALINK) += ralink-gdma.o diff --git a/target/linux/ramips/patches-3.10/0301-asoc-add-mt7620-support.patch b/target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch index c85f4177a0..469d2e404f 100644 --- a/target/linux/ramips/patches-3.10/0301-asoc-add-mt7620-support.patch +++ b/target/linux/ramips/patches-3.10/0112-asoc-add-mt7620-support.patch @@ -1,24 +1,42 @@ -From c72bc41d018519de5d63ec7790965fbf4605276a Mon Sep 17 00:00:00 2001 +From d4398d880eba386cb85d0a1a2ba39a336876dc0a Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Tue, 3 Dec 2013 20:18:13 +0100 -Subject: [PATCH] asoc: add mt7620 support +Subject: [PATCH 112/133] asoc: add mt7620 support Signed-off-by: John Crispin <blogic@openwrt.org> --- + arch/mips/ralink/of.c | 2 + sound/soc/Kconfig | 1 + sound/soc/Makefile | 1 + - sound/soc/ralink/Kconfig | 24 +++ - sound/soc/ralink/Makefile | 13 ++ - sound/soc/ralink/mt7620-i2s.c | 429 ++++++++++++++++++++++++++++++++++++++ - sound/soc/ralink/mt7620-pcm.c | 77 +++++++ - sound/soc/ralink/mt7620-wm8960.c | 124 +++++++++++ - 7 files changed, 669 insertions(+) + sound/soc/ralink/Kconfig | 15 ++ + sound/soc/ralink/Makefile | 11 + + sound/soc/ralink/mt7620-i2s.c | 466 ++++++++++++++++++++++++++++++++++++++ + sound/soc/ralink/mt7620-wm8960.c | 125 ++++++++++ + sound/soc/soc-io.c | 10 - + 8 files changed, 621 insertions(+), 10 deletions(-) create mode 100644 sound/soc/ralink/Kconfig create mode 100644 sound/soc/ralink/Makefile create mode 100644 sound/soc/ralink/mt7620-i2s.c - create mode 100644 sound/soc/ralink/mt7620-pcm.c create mode 100644 sound/soc/ralink/mt7620-wm8960.c +--- a/arch/mips/ralink/of.c ++++ b/arch/mips/ralink/of.c +@@ -15,6 +15,7 @@ + #include <linux/of_fdt.h> + #include <linux/kernel.h> + #include <linux/bootmem.h> ++#include <linux/module.h> + #include <linux/of_platform.h> + #include <linux/of_address.h> + +@@ -25,6 +26,7 @@ + #include "common.h" + + __iomem void *rt_sysc_membase; ++EXPORT_SYMBOL(rt_sysc_membase); + __iomem void *rt_memc_membase; + + extern struct boot_param_header __dtb_start; --- a/sound/soc/Kconfig +++ b/sound/soc/Kconfig @@ -48,6 +48,7 @@ source "sound/soc/kirkwood/Kconfig" @@ -668,24 +686,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +MODULE_DESCRIPTION("ALSA SoC QI LB60 Audio support"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:qi-lb60-audio"); ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -15,6 +15,7 @@ - #include <linux/of_fdt.h> - #include <linux/kernel.h> - #include <linux/bootmem.h> -+#include <linux/module.h> - #include <linux/of_platform.h> - #include <linux/of_address.h> - -@@ -25,6 +26,7 @@ - #include "common.h" - - __iomem void *rt_sysc_membase; -+EXPORT_SYMBOL(rt_sysc_membase); - __iomem void *rt_memc_membase; - - extern struct boot_param_header __dtb_start; --- a/sound/soc/soc-io.c +++ b/sound/soc/soc-io.c @@ -19,7 +19,6 @@ diff --git a/target/linux/ramips/patches-3.10/0122-pinmux.patch b/target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch index 20fc4286f2..b3750590e7 100644 --- a/target/linux/ramips/patches-3.10/0122-pinmux.patch +++ b/target/linux/ramips/patches-3.10/0113-pinctrl-ralink-add-pinctrl-driver.patch @@ -1,17 +1,24 @@ -From d59fe652e3674e98caa688b4ddc9308007267adc Mon Sep 17 00:00:00 2001 +From 47bbf432252b39361728c7685292dc9f889e6537 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 19 Aug 2013 13:49:52 +0200 -Subject: [PATCH] pinctrl: ralink; add pinctrl driver +Subject: [PATCH 113/133] pinctrl: ralink: add pinctrl driver Signed-off-by: John Crispin <blogic@openwrt.org> --- - arch/mips/Kconfig | 2 + - arch/mips/ralink/common.h | 21 +-- - arch/mips/ralink/dts/mt7620a.dtsi | 7 + - drivers/pinctrl/Kconfig | 5 + - drivers/pinctrl/Makefile | 1 + - drivers/pinctrl/pinctrl-rt2880.c | 368 +++++++++++++++++++++++++++++++++++++ - 6 files changed, 385 insertions(+), 19 deletions(-) + arch/mips/Kconfig | 2 + + arch/mips/include/asm/mach-ralink/mt7620.h | 41 ++- + arch/mips/include/asm/mach-ralink/pinmux.h | 53 ++++ + arch/mips/include/asm/mach-ralink/rt305x.h | 34 +- + arch/mips/include/asm/mach-ralink/rt3883.h | 16 +- + arch/mips/ralink/common.h | 19 -- + arch/mips/ralink/mt7620.c | 161 ++++------ + arch/mips/ralink/rt305x.c | 146 ++++----- + arch/mips/ralink/rt3883.c | 173 +++-------- + drivers/pinctrl/Kconfig | 5 + + drivers/pinctrl/Makefile | 1 + + drivers/pinctrl/pinctrl-rt2880.c | 467 ++++++++++++++++++++++++++++ + 12 files changed, 740 insertions(+), 378 deletions(-) + create mode 100644 arch/mips/include/asm/mach-ralink/pinmux.h create mode 100644 drivers/pinctrl/pinctrl-rt2880.c --- a/arch/mips/Kconfig @@ -25,499 +32,63 @@ Signed-off-by: John Crispin <blogic@openwrt.org> config SGI_IP22 bool "SGI IP22 (Indy/Indigo2)" ---- a/drivers/pinctrl/Kconfig -+++ b/drivers/pinctrl/Kconfig -@@ -114,6 +114,11 @@ config PINCTRL_LANTIQ - select PINMUX - select PINCONF - -+config PINCTRL_RT2880 -+ bool -+ depends on RALINK -+ select PINMUX -+ - config PINCTRL_FALCON - bool - depends on SOC_FALCON ---- a/drivers/pinctrl/Makefile -+++ b/drivers/pinctrl/Makefile -@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinc - obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o - obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o - obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o -+obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o +--- a/arch/mips/include/asm/mach-ralink/mt7620.h ++++ b/arch/mips/include/asm/mach-ralink/mt7620.h +@@ -56,7 +56,6 @@ + #define MT7620_DDR2_SIZE_MIN 32 + #define MT7620_DDR2_SIZE_MAX 256 - obj-$(CONFIG_PLAT_ORION) += mvebu/ - obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ ---- /dev/null -+++ b/drivers/pinctrl/pinctrl-rt2880.c -@@ -0,0 +1,466 @@ -+/* -+ * linux/drivers/pinctrl/pinctrl-rt2880.c -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * publishhed by the Free Software Foundation. -+ * -+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/module.h> -+#include <linux/device.h> -+#include <linux/io.h> -+#include <linux/platform_device.h> -+#include <linux/slab.h> -+#include <linux/of.h> -+#include <linux/pinctrl/pinctrl.h> -+#include <linux/pinctrl/pinconf.h> -+#include <linux/pinctrl/pinmux.h> -+#include <linux/pinctrl/consumer.h> -+#include <linux/pinctrl/machine.h> -+ -+#include <asm/mach-ralink/ralink_regs.h> -+#include <asm/mach-ralink/pinmux.h> -+#include <asm/mach-ralink/mt7620.h> -+ -+#include "core.h" -+ -+#define SYSC_REG_GPIO_MODE 0x60 -+ -+struct rt2880_priv { -+ struct device *dev; -+ -+ struct pinctrl_pin_desc *pads; -+ struct pinctrl_desc *desc; -+ -+ struct rt2880_pmx_func **func; -+ int func_count; -+ -+ struct rt2880_pmx_group *groups; -+ const char **group_names; -+ int group_count; -+ -+ uint8_t *gpio; -+ int max_pins; -+}; -+ -+struct rt2880_pmx_group *rt2880_pinmux_data = NULL; -+ -+static int rt2880_get_group_count(struct pinctrl_dev *pctrldev) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ return p->group_count; -+} -+ -+static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev, -+ unsigned group) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ if (group >= p->group_count) -+ return NULL; -+ -+ return p->group_names[group]; -+} -+ -+static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev, -+ unsigned group, -+ const unsigned **pins, -+ unsigned *num_pins) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ if (group >= p->group_count) -+ return -EINVAL; -+ -+ *pins = p->groups[group].func[0].pins; -+ *num_pins = p->groups[group].func[0].pin_count; -+ -+ return 0; -+} -+ -+static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev, -+ struct pinctrl_map *map, unsigned num_maps) -+{ -+ int i; -+ -+ for (i = 0; i < num_maps; i++) -+ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || -+ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) -+ kfree(map[i].data.configs.configs); -+ kfree(map); -+} -+ -+static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev, -+ struct seq_file *s, -+ unsigned offset) -+{ -+ seq_printf(s, "ralink pio"); -+} -+ -+static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev, -+ struct device_node *np, -+ struct pinctrl_map **map) -+{ -+ const char *function; -+ int func = of_property_read_string(np, "ralink,function", &function); -+ int grps = of_property_count_strings(np, "ralink,group"); -+ int i; -+ -+ if (func || !grps) -+ return; -+ -+ for (i = 0; i < grps; i++) { -+ const char *group; -+ -+ of_property_read_string_index(np, "ralink,group", i, &group); -+ -+ (*map)->type = PIN_MAP_TYPE_MUX_GROUP; -+ (*map)->name = function; -+ (*map)->data.mux.group = group; -+ (*map)->data.mux.function = function; -+ (*map)++; -+ } -+} -+ -+static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev, -+ struct device_node *np_config, -+ struct pinctrl_map **map, -+ unsigned *num_maps) -+{ -+ int max_maps = 0; -+ struct pinctrl_map *tmp; -+ struct device_node *np; -+ -+ for_each_child_of_node(np_config, np) { -+ int ret = of_property_count_strings(np, "ralink,group"); -+ -+ if (ret >= 0) -+ max_maps += ret; -+ } -+ -+ if (!max_maps) -+ return max_maps; -+ -+ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL); -+ if (!*map) -+ return -ENOMEM; -+ -+ tmp = *map; -+ -+ for_each_child_of_node(np_config, np) -+ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp); -+ *num_maps = max_maps; -+ -+ return 0; -+} -+ -+static const struct pinctrl_ops rt2880_pctrl_ops = { -+ .get_groups_count = rt2880_get_group_count, -+ .get_group_name = rt2880_get_group_name, -+ .get_group_pins = rt2880_get_group_pins, -+ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show, -+ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map, -+ .dt_free_map = rt2880_pinctrl_dt_free_map, -+}; -+ -+static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ return p->func_count; -+} -+ -+static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev, -+ unsigned func) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ return p->func[func]->name; -+} -+ -+static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev, -+ unsigned func, -+ const char * const **groups, -+ unsigned * const num_groups) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ if (p->func[func]->group_count == 1) -+ *groups = &p->group_names[p->func[func]->groups[0]]; -+ else -+ *groups = p->group_names; -+ -+ *num_groups = p->func[func]->group_count; -+ -+ return 0; -+} -+ -+static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev, -+ unsigned func, -+ unsigned group) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ u32 mode = 0; -+ -+ /* dont allow double use */ -+ if (p->groups[group].enabled) { -+ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name); -+ return -EBUSY; -+ } -+ -+ p->groups[group].enabled = 1; -+ p->func[func]->enabled = 1; -+ -+ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); -+ mode &= ~(p->groups[group].mask << p->groups[group].shift); -+ -+ /* function 0 is gpio and needs special handling */ -+ if (func == 0) { -+ int i; -+ -+ -+ mode |= p->groups[group].gpio << p->groups[group].shift; -+ /* mark the pins as gpio */ -+ for (i = 0; i < p->groups[group].func[0].pin_count; i++) -+ p->gpio[p->groups[group].func[0].pins[i]] = 1; -+ } else { -+ mode |= p->func[func]->value << p->groups[group].shift; -+ } -+ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); -+ -+ -+ return 0; -+} -+ -+static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev, -+ struct pinctrl_gpio_range *range, -+ unsigned pin) -+{ -+ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); -+ -+ if (!p->gpio[pin]) { -+ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin); -+ return -EINVAL; -+ } -+ -+ return 0; -+} -+ -+static const struct pinmux_ops rt2880_pmx_group_ops = { -+ .get_functions_count = rt2880_pmx_func_count, -+ .get_function_name = rt2880_pmx_func_name, -+ .get_function_groups = rt2880_pmx_group_get_groups, -+ .enable = rt2880_pmx_group_enable, -+ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable, -+}; -+ -+static struct pinctrl_desc rt2880_pctrl_desc = { -+ .owner = THIS_MODULE, -+ .name = "rt2880-pinmux", -+ .pctlops = &rt2880_pctrl_ops, -+ .pmxops = &rt2880_pmx_group_ops, -+}; -+ -+static struct rt2880_pmx_func gpio_func = { -+ .name = "gpio", -+}; -+ -+static int rt2880_pinmux_index(struct rt2880_priv *p) -+{ -+ struct rt2880_pmx_func **f; -+ struct rt2880_pmx_group *mux = p->groups; -+ int i, j, c = 0; -+ -+ /* count the mux functions */ -+ while (mux->name) { -+ p->group_count++; -+ mux++; -+ } -+ -+ /* allocate the group names array needed by the gpio function */ -+ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL); -+ if (!p->group_names) -+ return -1; -+ -+ for (i = 0; i < p->group_count; i++) { -+ p->group_names[i] = p->groups[i].name; -+ p->func_count += p->groups[i].func_count; -+ } -+ -+ /* we have a dummy function[0] for gpio */ -+ p->func_count++; -+ -+ /* allocate our function and group mapping index buffers */ -+ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL); -+ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL); -+ if (!f || !gpio_func.groups) -+ return -1; -+ -+ /* add a backpointer to the function so it knows its group */ -+ gpio_func.group_count = p->group_count; -+ for (i = 0; i < gpio_func.group_count; i++) -+ gpio_func.groups[i] = i; -+ -+ f[c] = &gpio_func; -+ c++; -+ -+ /* add remaining functions */ -+ for (i = 0; i < p->group_count; i++) { -+ for (j = 0; j < p->groups[i].func_count; j++) { -+ f[c] = &p->groups[i].func[j]; -+ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL); -+ f[c]->groups[0] = i; -+ f[c]->group_count = 1; -+ c++; -+ } -+ } -+ return 0; -+} -+ -+static int rt2880_pinmux_pins(struct rt2880_priv *p) -+{ -+ int i, j; -+ -+ /* loop over the functions and initialize the pins array. also work out the highest pin used */ -+ for (i = 0; i < p->func_count; i++) { -+ int pin; -+ -+ if (!p->func[i]->pin_count) -+ continue; -+ -+ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL); -+ for (j = 0; j < p->func[i]->pin_count; j++) -+ p->func[i]->pins[j] = p->func[i]->pin_first + j; -+ -+ pin = p->func[i]->pin_first + p->func[i]->pin_count; -+ if (pin > p->max_pins) -+ p->max_pins = pin; -+ } -+ -+ /* the buffer that tells us which pins are gpio */ -+ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins, -+ GFP_KERNEL); -+ /* the pads needed to tell pinctrl about our pins */ -+ p->pads = devm_kzalloc(p->dev, -+ sizeof(struct pinctrl_pin_desc) * p->max_pins, -+ GFP_KERNEL); -+ if (!p->pads || !p->gpio ) { -+ dev_err(p->dev, "Failed to allocate gpio data\n"); -+ return -ENOMEM; -+ } -+ -+ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins); -+ for (i = 0; i < p->func_count; i++) { -+ if (!p->func[i]->pin_count) -+ continue; -+ -+ for (j = 0; j < p->func[i]->pin_count; j++) -+ p->gpio[p->func[i]->pins[j]] = 0; -+ } -+ -+ /* pin 0 is always a gpio */ -+ p->gpio[0] = 1; -+ -+ /* set the pads */ -+ for (i = 0; i < p->max_pins; i++) { -+ /* strlen("ioXY") + 1 = 5 */ -+ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL); -+ -+ if (!name) { -+ dev_err(p->dev, "Failed to allocate pad name\n"); -+ return -ENOMEM; -+ } -+ snprintf(name, 5, "io%d", i); -+ p->pads[i].number = i; -+ p->pads[i].name = name; -+ } -+ p->desc->pins = p->pads; -+ p->desc->npins = p->max_pins; -+ -+ return 0; -+} -+ -+static int rt2880_pinmux_probe(struct platform_device *pdev) -+{ -+ struct rt2880_priv *p; -+ struct pinctrl_dev *dev; -+ struct device_node *np; -+ -+ if (!rt2880_pinmux_data) -+ return -ENOSYS; -+ -+ /* setup the private data */ -+ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL); -+ if (!p) -+ return -ENOMEM; -+ -+ p->dev = &pdev->dev; -+ p->desc = &rt2880_pctrl_desc; -+ p->groups = rt2880_pinmux_data; -+ platform_set_drvdata(pdev, p); -+ -+ /* init the device */ -+ if (rt2880_pinmux_index(p)) { -+ dev_err(&pdev->dev, "failed to load index\n"); -+ return -EINVAL; -+ } -+ if (rt2880_pinmux_pins(p)) { -+ dev_err(&pdev->dev, "failed to load pins\n"); -+ return -EINVAL; -+ } -+ dev = pinctrl_register(p->desc, &pdev->dev, p); -+ if (IS_ERR(dev)) -+ return PTR_ERR(dev); -+ -+ /* finalize by adding gpio ranges for enables gpio controllers */ -+ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") { -+ const __be32 *ngpio, *gpiobase; -+ struct pinctrl_gpio_range *range; -+ char *name; -+ -+ if (!of_device_is_available(np)) -+ continue; -+ -+ ngpio = of_get_property(np, "ralink,num-gpios", NULL); -+ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); -+ if (!ngpio || !gpiobase) { -+ dev_err(&pdev->dev, "failed to load chip info\n"); -+ return -EINVAL; -+ } -+ -+ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL); -+ range->name = name = (char *) &range[1]; -+ sprintf(name, "pio"); -+ range->npins = __be32_to_cpu(*ngpio); -+ range->base = __be32_to_cpu(*gpiobase); -+ range->pin_base = range->base; -+ pinctrl_add_gpio_range(dev, range); -+ } -+ -+ return 0; -+} +-#define MT7620_GPIO_MODE_I2C BIT(0) + #define MT7620_GPIO_MODE_UART0_SHIFT 2 + #define MT7620_GPIO_MODE_UART0_MASK 0x7 + #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) +@@ -68,16 +67,36 @@ + #define MT7620_GPIO_MODE_GPIO_UARTF 0x5 + #define MT7620_GPIO_MODE_GPIO_I2S 0x6 + #define MT7620_GPIO_MODE_GPIO 0x7 +-#define MT7620_GPIO_MODE_UART1 BIT(5) +-#define MT7620_GPIO_MODE_MDIO BIT(8) +-#define MT7620_GPIO_MODE_RGMII1 BIT(9) +-#define MT7620_GPIO_MODE_RGMII2 BIT(10) +-#define MT7620_GPIO_MODE_SPI BIT(11) +-#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12) +-#define MT7620_GPIO_MODE_WLED BIT(13) +-#define MT7620_GPIO_MODE_JTAG BIT(15) +-#define MT7620_GPIO_MODE_EPHY BIT(15) +-#define MT7620_GPIO_MODE_WDT BIT(22) + -+static const struct of_device_id rt2880_pinmux_match[] = { -+ { .compatible = "ralink,rt2880-pinmux" }, -+ {}, -+}; -+MODULE_DEVICE_TABLE(of, rt2880_pinmux_match); ++#define MT7620_GPIO_MODE_NAND 0 ++#define MT7620_GPIO_MODE_SD 1 ++#define MT7620_GPIO_MODE_ND_SD_GPIO 2 ++#define MT7620_GPIO_MODE_ND_SD_MASK 0x3 ++#define MT7620_GPIO_MODE_ND_SD_SHIFT 18 + -+static struct platform_driver rt2880_pinmux_driver = { -+ .probe = rt2880_pinmux_probe, -+ .driver = { -+ .name = "rt2880-pinmux", -+ .owner = THIS_MODULE, -+ .of_match_table = rt2880_pinmux_match, -+ }, -+}; ++#define MT7620_GPIO_MODE_PCIE_RST 0 ++#define MT7620_GPIO_MODE_PCIE_REF 1 ++#define MT7620_GPIO_MODE_PCIE_GPIO 2 ++#define MT7620_GPIO_MODE_PCIE_MASK 0x3 ++#define MT7620_GPIO_MODE_PCIE_SHIFT 16 + -+int __init rt2880_pinmux_init(void) -+{ -+ return platform_driver_register(&rt2880_pinmux_driver); -+} ++#define MT7620_GPIO_MODE_WDT_RST 0 ++#define MT7620_GPIO_MODE_WDT_REF 1 ++#define MT7620_GPIO_MODE_WDT_GPIO 2 ++#define MT7620_GPIO_MODE_WDT_MASK 0x3 ++#define MT7620_GPIO_MODE_WDT_SHIFT 21 + -+core_initcall_sync(rt2880_pinmux_init); ++#define MT7620_GPIO_MODE_I2C 0 ++#define MT7620_GPIO_MODE_UART1 5 ++#define MT7620_GPIO_MODE_MDIO 8 ++#define MT7620_GPIO_MODE_RGMII1 9 ++#define MT7620_GPIO_MODE_RGMII2 10 ++#define MT7620_GPIO_MODE_SPI 11 ++#define MT7620_GPIO_MODE_SPI_REF_CLK 12 ++#define MT7620_GPIO_MODE_WLED 13 ++#define MT7620_GPIO_MODE_JTAG 15 ++#define MT7620_GPIO_MODE_EPHY 15 ++#define MT7620_GPIO_MODE_PA 20 + + static inline int mt7620_get_eco(void) + { --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/pinmux.h @@ -0,0 +1,53 @@ @@ -574,6 +145,112 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +extern struct rt2880_pmx_group *rt2880_pinmux_data; + +#endif +--- a/arch/mips/include/asm/mach-ralink/rt305x.h ++++ b/arch/mips/include/asm/mach-ralink/rt305x.h +@@ -125,24 +125,28 @@ static inline int soc_is_rt5350(void) + #define RT305X_GPIO_GE0_TXD0 40 + #define RT305X_GPIO_GE0_RXCLK 51 + +-#define RT305X_GPIO_MODE_I2C BIT(0) +-#define RT305X_GPIO_MODE_SPI BIT(1) + #define RT305X_GPIO_MODE_UART0_SHIFT 2 + #define RT305X_GPIO_MODE_UART0_MASK 0x7 + #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) +-#define RT305X_GPIO_MODE_UARTF 0x0 +-#define RT305X_GPIO_MODE_PCM_UARTF 0x1 +-#define RT305X_GPIO_MODE_PCM_I2S 0x2 +-#define RT305X_GPIO_MODE_I2S_UARTF 0x3 +-#define RT305X_GPIO_MODE_PCM_GPIO 0x4 +-#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 +-#define RT305X_GPIO_MODE_GPIO_I2S 0x6 +-#define RT305X_GPIO_MODE_GPIO 0x7 +-#define RT305X_GPIO_MODE_UART1 BIT(5) +-#define RT305X_GPIO_MODE_JTAG BIT(6) +-#define RT305X_GPIO_MODE_MDIO BIT(7) +-#define RT305X_GPIO_MODE_SDRAM BIT(8) +-#define RT305X_GPIO_MODE_RGMII BIT(9) ++#define RT305X_GPIO_MODE_UARTF 0 ++#define RT305X_GPIO_MODE_PCM_UARTF 1 ++#define RT305X_GPIO_MODE_PCM_I2S 2 ++#define RT305X_GPIO_MODE_I2S_UARTF 3 ++#define RT305X_GPIO_MODE_PCM_GPIO 4 ++#define RT305X_GPIO_MODE_GPIO_UARTF 5 ++#define RT305X_GPIO_MODE_GPIO_I2S 6 ++#define RT305X_GPIO_MODE_GPIO 7 ++ ++#define RT305X_GPIO_MODE_I2C 0 ++#define RT305X_GPIO_MODE_SPI 1 ++#define RT305X_GPIO_MODE_UART1 5 ++#define RT305X_GPIO_MODE_JTAG 6 ++#define RT305X_GPIO_MODE_MDIO 7 ++#define RT305X_GPIO_MODE_SDRAM 8 ++#define RT305X_GPIO_MODE_RGMII 9 ++#define RT5350_GPIO_MODE_PHY_LED 14 ++#define RT3352_GPIO_MODE_LNA 18 ++#define RT3352_GPIO_MODE_PA 20 + + #define RT3352_SYSC_REG_SYSCFG0 0x010 + #define RT3352_SYSC_REG_SYSCFG1 0x014 +--- a/arch/mips/include/asm/mach-ralink/rt3883.h ++++ b/arch/mips/include/asm/mach-ralink/rt3883.h +@@ -112,8 +112,6 @@ + #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) + #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) + +-#define RT3883_GPIO_MODE_I2C BIT(0) +-#define RT3883_GPIO_MODE_SPI BIT(1) + #define RT3883_GPIO_MODE_UART0_SHIFT 2 + #define RT3883_GPIO_MODE_UART0_MASK 0x7 + #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) +@@ -125,11 +123,15 @@ + #define RT3883_GPIO_MODE_GPIO_UARTF 0x5 + #define RT3883_GPIO_MODE_GPIO_I2S 0x6 + #define RT3883_GPIO_MODE_GPIO 0x7 +-#define RT3883_GPIO_MODE_UART1 BIT(5) +-#define RT3883_GPIO_MODE_JTAG BIT(6) +-#define RT3883_GPIO_MODE_MDIO BIT(7) +-#define RT3883_GPIO_MODE_GE1 BIT(9) +-#define RT3883_GPIO_MODE_GE2 BIT(10) ++ ++#define RT3883_GPIO_MODE_I2C 0 ++#define RT3883_GPIO_MODE_SPI 1 ++#define RT3883_GPIO_MODE_UART1 5 ++#define RT3883_GPIO_MODE_JTAG 6 ++#define RT3883_GPIO_MODE_MDIO 7 ++#define RT3883_GPIO_MODE_GE1 9 ++#define RT3883_GPIO_MODE_GE2 10 ++ + #define RT3883_GPIO_MODE_PCI_SHIFT 11 + #define RT3883_GPIO_MODE_PCI_MASK 0x7 + #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT) +--- a/arch/mips/ralink/common.h ++++ b/arch/mips/ralink/common.h +@@ -11,25 +11,6 @@ + + #define RAMIPS_SYS_TYPE_LEN 32 + +-struct ralink_pinmux_grp { +- const char *name; +- u32 mask; +- int gpio_first; +- int gpio_last; +-}; +- +-struct ralink_pinmux { +- struct ralink_pinmux_grp *mode; +- struct ralink_pinmux_grp *uart; +- int uart_shift; +- u32 uart_mask; +- void (*wdt_reset)(void); +- struct ralink_pinmux_grp *pci; +- int pci_shift; +- u32 pci_mask; +-}; +-extern struct ralink_pinmux rt_gpio_pinmux; +- + struct ralink_soc_info { + unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; + unsigned char *compatible; --- a/arch/mips/ralink/mt7620.c +++ b/arch/mips/ralink/mt7620.c @@ -17,6 +17,7 @@ @@ -752,7 +429,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> }; void __init ralink_clk_init(void) -@@ -281,4 +222,6 @@ void prom_soc_init(struct ralink_soc_inf +@@ -286,4 +227,6 @@ void prom_soc_init(struct ralink_soc_inf (pmu0 & PMU_SW_SET) ? ("sw") : ("hw")); pr_info("Digital PMU set to %s control\n", (pmu1 & DIG_SW_SEL) ? ("sw") : ("hw")); @@ -925,7 +602,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> static unsigned long rt5350_get_mem_size(void) { void __iomem *sysc = (void __iomem *) KSEG1ADDR(RT305X_SYSC_BASE); -@@ -291,11 +264,14 @@ void prom_soc_init(struct ralink_soc_inf +@@ -290,11 +263,14 @@ void prom_soc_init(struct ralink_soc_inf soc_info->mem_base = RT305X_SDRAM_BASE; if (soc_is_rt5350()) { soc_info->mem_size = rt5350_get_mem_size(); @@ -940,168 +617,6 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + rt2880_pinmux_data = rt3352_pinmux_data; } } ---- a/arch/mips/include/asm/mach-ralink/rt305x.h -+++ b/arch/mips/include/asm/mach-ralink/rt305x.h -@@ -125,24 +125,28 @@ static inline int soc_is_rt5350(void) - #define RT305X_GPIO_GE0_TXD0 40 - #define RT305X_GPIO_GE0_RXCLK 51 - --#define RT305X_GPIO_MODE_I2C BIT(0) --#define RT305X_GPIO_MODE_SPI BIT(1) - #define RT305X_GPIO_MODE_UART0_SHIFT 2 - #define RT305X_GPIO_MODE_UART0_MASK 0x7 - #define RT305X_GPIO_MODE_UART0(x) ((x) << RT305X_GPIO_MODE_UART0_SHIFT) --#define RT305X_GPIO_MODE_UARTF 0x0 --#define RT305X_GPIO_MODE_PCM_UARTF 0x1 --#define RT305X_GPIO_MODE_PCM_I2S 0x2 --#define RT305X_GPIO_MODE_I2S_UARTF 0x3 --#define RT305X_GPIO_MODE_PCM_GPIO 0x4 --#define RT305X_GPIO_MODE_GPIO_UARTF 0x5 --#define RT305X_GPIO_MODE_GPIO_I2S 0x6 --#define RT305X_GPIO_MODE_GPIO 0x7 --#define RT305X_GPIO_MODE_UART1 BIT(5) --#define RT305X_GPIO_MODE_JTAG BIT(6) --#define RT305X_GPIO_MODE_MDIO BIT(7) --#define RT305X_GPIO_MODE_SDRAM BIT(8) --#define RT305X_GPIO_MODE_RGMII BIT(9) -+#define RT305X_GPIO_MODE_UARTF 0 -+#define RT305X_GPIO_MODE_PCM_UARTF 1 -+#define RT305X_GPIO_MODE_PCM_I2S 2 -+#define RT305X_GPIO_MODE_I2S_UARTF 3 -+#define RT305X_GPIO_MODE_PCM_GPIO 4 -+#define RT305X_GPIO_MODE_GPIO_UARTF 5 -+#define RT305X_GPIO_MODE_GPIO_I2S 6 -+#define RT305X_GPIO_MODE_GPIO 7 -+ -+#define RT305X_GPIO_MODE_I2C 0 -+#define RT305X_GPIO_MODE_SPI 1 -+#define RT305X_GPIO_MODE_UART1 5 -+#define RT305X_GPIO_MODE_JTAG 6 -+#define RT305X_GPIO_MODE_MDIO 7 -+#define RT305X_GPIO_MODE_SDRAM 8 -+#define RT305X_GPIO_MODE_RGMII 9 -+#define RT5350_GPIO_MODE_PHY_LED 14 -+#define RT3352_GPIO_MODE_LNA 18 -+#define RT3352_GPIO_MODE_PA 20 - - #define RT3352_SYSC_REG_SYSCFG0 0x010 - #define RT3352_SYSC_REG_SYSCFG1 0x014 ---- a/arch/mips/include/asm/mach-ralink/mt7620.h -+++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -59,7 +59,6 @@ - #define MT7620_DDR2_SIZE_MIN 32 - #define MT7620_DDR2_SIZE_MAX 256 - --#define MT7620_GPIO_MODE_I2C BIT(0) - #define MT7620_GPIO_MODE_UART0_SHIFT 2 - #define MT7620_GPIO_MODE_UART0_MASK 0x7 - #define MT7620_GPIO_MODE_UART0(x) ((x) << MT7620_GPIO_MODE_UART0_SHIFT) -@@ -71,15 +70,35 @@ - #define MT7620_GPIO_MODE_GPIO_UARTF 0x5 - #define MT7620_GPIO_MODE_GPIO_I2S 0x6 - #define MT7620_GPIO_MODE_GPIO 0x7 --#define MT7620_GPIO_MODE_UART1 BIT(5) --#define MT7620_GPIO_MODE_MDIO BIT(8) --#define MT7620_GPIO_MODE_RGMII1 BIT(9) --#define MT7620_GPIO_MODE_RGMII2 BIT(10) --#define MT7620_GPIO_MODE_SPI BIT(11) --#define MT7620_GPIO_MODE_SPI_REF_CLK BIT(12) --#define MT7620_GPIO_MODE_WLED BIT(13) --#define MT7620_GPIO_MODE_JTAG BIT(15) --#define MT7620_GPIO_MODE_EPHY BIT(15) --#define MT7620_GPIO_MODE_WDT BIT(22) -+ -+#define MT7620_GPIO_MODE_NAND 0 -+#define MT7620_GPIO_MODE_SD 1 -+#define MT7620_GPIO_MODE_ND_SD_GPIO 2 -+#define MT7620_GPIO_MODE_ND_SD_MASK 0x3 -+#define MT7620_GPIO_MODE_ND_SD_SHIFT 18 -+ -+#define MT7620_GPIO_MODE_PCIE_RST 0 -+#define MT7620_GPIO_MODE_PCIE_REF 1 -+#define MT7620_GPIO_MODE_PCIE_GPIO 2 -+#define MT7620_GPIO_MODE_PCIE_MASK 0x3 -+#define MT7620_GPIO_MODE_PCIE_SHIFT 16 -+ -+#define MT7620_GPIO_MODE_WDT_RST 0 -+#define MT7620_GPIO_MODE_WDT_REF 1 -+#define MT7620_GPIO_MODE_WDT_GPIO 2 -+#define MT7620_GPIO_MODE_WDT_MASK 0x3 -+#define MT7620_GPIO_MODE_WDT_SHIFT 21 -+ -+#define MT7620_GPIO_MODE_I2C 0 -+#define MT7620_GPIO_MODE_UART1 5 -+#define MT7620_GPIO_MODE_MDIO 8 -+#define MT7620_GPIO_MODE_RGMII1 9 -+#define MT7620_GPIO_MODE_RGMII2 10 -+#define MT7620_GPIO_MODE_SPI 11 -+#define MT7620_GPIO_MODE_SPI_REF_CLK 12 -+#define MT7620_GPIO_MODE_WLED 13 -+#define MT7620_GPIO_MODE_JTAG 15 -+#define MT7620_GPIO_MODE_EPHY 15 -+#define MT7620_GPIO_MODE_PA 20 - - #endif ---- a/arch/mips/include/asm/mach-ralink/rt3883.h -+++ b/arch/mips/include/asm/mach-ralink/rt3883.h -@@ -112,8 +112,6 @@ - #define RT3883_CLKCFG1_PCI_CLK_EN BIT(19) - #define RT3883_CLKCFG1_UPHY0_CLK_EN BIT(18) - --#define RT3883_GPIO_MODE_I2C BIT(0) --#define RT3883_GPIO_MODE_SPI BIT(1) - #define RT3883_GPIO_MODE_UART0_SHIFT 2 - #define RT3883_GPIO_MODE_UART0_MASK 0x7 - #define RT3883_GPIO_MODE_UART0(x) ((x) << RT3883_GPIO_MODE_UART0_SHIFT) -@@ -125,11 +123,15 @@ - #define RT3883_GPIO_MODE_GPIO_UARTF 0x5 - #define RT3883_GPIO_MODE_GPIO_I2S 0x6 - #define RT3883_GPIO_MODE_GPIO 0x7 --#define RT3883_GPIO_MODE_UART1 BIT(5) --#define RT3883_GPIO_MODE_JTAG BIT(6) --#define RT3883_GPIO_MODE_MDIO BIT(7) --#define RT3883_GPIO_MODE_GE1 BIT(9) --#define RT3883_GPIO_MODE_GE2 BIT(10) -+ -+#define RT3883_GPIO_MODE_I2C 0 -+#define RT3883_GPIO_MODE_SPI 1 -+#define RT3883_GPIO_MODE_UART1 5 -+#define RT3883_GPIO_MODE_JTAG 6 -+#define RT3883_GPIO_MODE_MDIO 7 -+#define RT3883_GPIO_MODE_GE1 9 -+#define RT3883_GPIO_MODE_GE2 10 -+ - #define RT3883_GPIO_MODE_PCI_SHIFT 11 - #define RT3883_GPIO_MODE_PCI_MASK 0x7 - #define RT3883_GPIO_MODE_PCI (RT3883_GPIO_MODE_PCI_MASK << RT3883_GPIO_MODE_PCI_SHIFT) ---- a/arch/mips/ralink/common.h -+++ b/arch/mips/ralink/common.h -@@ -11,25 +11,6 @@ - - #define RAMIPS_SYS_TYPE_LEN 32 - --struct ralink_pinmux_grp { -- const char *name; -- u32 mask; -- int gpio_first; -- int gpio_last; --}; -- --struct ralink_pinmux { -- struct ralink_pinmux_grp *mode; -- struct ralink_pinmux_grp *uart; -- int uart_shift; -- u32 uart_mask; -- void (*wdt_reset)(void); -- struct ralink_pinmux_grp *pci; -- int pci_shift; -- u32 pci_mask; --}; --extern struct ralink_pinmux rt_gpio_pinmux; -- - struct ralink_soc_info { - unsigned char sys_type[RAMIPS_SYS_TYPE_LEN]; - unsigned char *compatible; --- a/arch/mips/ralink/rt3883.c +++ b/arch/mips/ralink/rt3883.c @@ -17,132 +17,50 @@ @@ -1300,3 +815,497 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + + rt2880_pinmux_data = rt3883_pinmux_data; } +--- a/drivers/pinctrl/Kconfig ++++ b/drivers/pinctrl/Kconfig +@@ -114,6 +114,11 @@ config PINCTRL_LANTIQ + select PINMUX + select PINCONF + ++config PINCTRL_RT2880 ++ bool ++ depends on RALINK ++ select PINMUX ++ + config PINCTRL_FALCON + bool + depends on SOC_FALCON +--- a/drivers/pinctrl/Makefile ++++ b/drivers/pinctrl/Makefile +@@ -45,6 +45,7 @@ obj-$(CONFIG_PINCTRL_EXYNOS5440) += pinc + obj-$(CONFIG_PINCTRL_S3C64XX) += pinctrl-s3c64xx.o + obj-$(CONFIG_PINCTRL_XWAY) += pinctrl-xway.o + obj-$(CONFIG_PINCTRL_LANTIQ) += pinctrl-lantiq.o ++obj-$(CONFIG_PINCTRL_RT2880) += pinctrl-rt2880.o + + obj-$(CONFIG_PLAT_ORION) += mvebu/ + obj-$(CONFIG_ARCH_SHMOBILE) += sh-pfc/ +--- /dev/null ++++ b/drivers/pinctrl/pinctrl-rt2880.c +@@ -0,0 +1,467 @@ ++/* ++ * linux/drivers/pinctrl/pinctrl-rt2880.c ++ * ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License version 2 as ++ * publishhed by the Free Software Foundation. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/module.h> ++#include <linux/device.h> ++#include <linux/io.h> ++#include <linux/platform_device.h> ++#include <linux/slab.h> ++#include <linux/of.h> ++#include <linux/pinctrl/pinctrl.h> ++#include <linux/pinctrl/pinconf.h> ++#include <linux/pinctrl/pinmux.h> ++#include <linux/pinctrl/consumer.h> ++#include <linux/pinctrl/machine.h> ++ ++#include <asm/mach-ralink/ralink_regs.h> ++#include <asm/mach-ralink/pinmux.h> ++#include <asm/mach-ralink/mt7620.h> ++ ++#include "core.h" ++ ++#define SYSC_REG_GPIO_MODE 0x60 ++ ++struct rt2880_priv { ++ struct device *dev; ++ ++ struct pinctrl_pin_desc *pads; ++ struct pinctrl_desc *desc; ++ ++ struct rt2880_pmx_func **func; ++ int func_count; ++ ++ struct rt2880_pmx_group *groups; ++ const char **group_names; ++ int group_count; ++ ++ uint8_t *gpio; ++ int max_pins; ++}; ++ ++struct rt2880_pmx_group *rt2880_pinmux_data = NULL; ++ ++static int rt2880_get_group_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->group_count; ++} ++ ++static const char *rt2880_get_group_name(struct pinctrl_dev *pctrldev, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return NULL; ++ ++ return p->group_names[group]; ++} ++ ++static int rt2880_get_group_pins(struct pinctrl_dev *pctrldev, ++ unsigned group, ++ const unsigned **pins, ++ unsigned *num_pins) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (group >= p->group_count) ++ return -EINVAL; ++ ++ *pins = p->groups[group].func[0].pins; ++ *num_pins = p->groups[group].func[0].pin_count; ++ ++ return 0; ++} ++ ++static void rt2880_pinctrl_dt_free_map(struct pinctrl_dev *pctrldev, ++ struct pinctrl_map *map, unsigned num_maps) ++{ ++ int i; ++ ++ for (i = 0; i < num_maps; i++) ++ if (map[i].type == PIN_MAP_TYPE_CONFIGS_PIN || ++ map[i].type == PIN_MAP_TYPE_CONFIGS_GROUP) ++ kfree(map[i].data.configs.configs); ++ kfree(map); ++} ++ ++static void rt2880_pinctrl_pin_dbg_show(struct pinctrl_dev *pctrldev, ++ struct seq_file *s, ++ unsigned offset) ++{ ++ seq_printf(s, "ralink pio"); ++} ++ ++static void rt2880_pinctrl_dt_subnode_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np, ++ struct pinctrl_map **map) ++{ ++ const char *function; ++ int func = of_property_read_string(np, "ralink,function", &function); ++ int grps = of_property_count_strings(np, "ralink,group"); ++ int i; ++ ++ if (func || !grps) ++ return; ++ ++ for (i = 0; i < grps; i++) { ++ const char *group; ++ ++ of_property_read_string_index(np, "ralink,group", i, &group); ++ ++ (*map)->type = PIN_MAP_TYPE_MUX_GROUP; ++ (*map)->name = function; ++ (*map)->data.mux.group = group; ++ (*map)->data.mux.function = function; ++ (*map)++; ++ } ++} ++ ++static int rt2880_pinctrl_dt_node_to_map(struct pinctrl_dev *pctrldev, ++ struct device_node *np_config, ++ struct pinctrl_map **map, ++ unsigned *num_maps) ++{ ++ int max_maps = 0; ++ struct pinctrl_map *tmp; ++ struct device_node *np; ++ ++ for_each_child_of_node(np_config, np) { ++ int ret = of_property_count_strings(np, "ralink,group"); ++ ++ if (ret >= 0) ++ max_maps += ret; ++ } ++ ++ if (!max_maps) ++ return max_maps; ++ ++ *map = kzalloc(max_maps * sizeof(struct pinctrl_map), GFP_KERNEL); ++ if (!*map) ++ return -ENOMEM; ++ ++ tmp = *map; ++ ++ for_each_child_of_node(np_config, np) ++ rt2880_pinctrl_dt_subnode_to_map(pctrldev, np, &tmp); ++ *num_maps = max_maps; ++ ++ return 0; ++} ++ ++static const struct pinctrl_ops rt2880_pctrl_ops = { ++ .get_groups_count = rt2880_get_group_count, ++ .get_group_name = rt2880_get_group_name, ++ .get_group_pins = rt2880_get_group_pins, ++ .pin_dbg_show = rt2880_pinctrl_pin_dbg_show, ++ .dt_node_to_map = rt2880_pinctrl_dt_node_to_map, ++ .dt_free_map = rt2880_pinctrl_dt_free_map, ++}; ++ ++static int rt2880_pmx_func_count(struct pinctrl_dev *pctrldev) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func_count; ++} ++ ++static const char *rt2880_pmx_func_name(struct pinctrl_dev *pctrldev, ++ unsigned func) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ return p->func[func]->name; ++} ++ ++static int rt2880_pmx_group_get_groups(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ const char * const **groups, ++ unsigned * const num_groups) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (p->func[func]->group_count == 1) ++ *groups = &p->group_names[p->func[func]->groups[0]]; ++ else ++ *groups = p->group_names; ++ ++ *num_groups = p->func[func]->group_count; ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_enable(struct pinctrl_dev *pctrldev, ++ unsigned func, ++ unsigned group) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ u32 mode = 0; ++ int i; ++ ++ /* dont allow double use */ ++ if (p->groups[group].enabled) { ++ dev_err(p->dev, "%s is already enabled\n", p->groups[group].name); ++ return -EBUSY; ++ } ++ ++ p->groups[group].enabled = 1; ++ p->func[func]->enabled = 1; ++ ++ mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); ++ mode &= ~(p->groups[group].mask << p->groups[group].shift); ++ ++ /* mark the pins as gpio */ ++ for (i = 0; i < p->groups[group].func[0].pin_count; i++) ++ p->gpio[p->groups[group].func[0].pins[i]] = 1; ++ ++ /* function 0 is gpio and needs special handling */ ++ if (func == 0) { ++ mode |= p->groups[group].gpio << p->groups[group].shift; ++ } else { ++ for (i = 0; i < p->func[func]->pin_count; i++) ++ p->gpio[p->func[func]->pins[i]] = 0; ++ mode |= p->func[func]->value << p->groups[group].shift; ++ } ++ rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); ++ ++ ++ return 0; ++} ++ ++static int rt2880_pmx_group_gpio_request_enable(struct pinctrl_dev *pctrldev, ++ struct pinctrl_gpio_range *range, ++ unsigned pin) ++{ ++ struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); ++ ++ if (!p->gpio[pin]) { ++ dev_err(p->dev, "pin %d is not set to gpio mux\n", pin); ++ return -EINVAL; ++ } ++ ++ return 0; ++} ++ ++static const struct pinmux_ops rt2880_pmx_group_ops = { ++ .get_functions_count = rt2880_pmx_func_count, ++ .get_function_name = rt2880_pmx_func_name, ++ .get_function_groups = rt2880_pmx_group_get_groups, ++ .enable = rt2880_pmx_group_enable, ++ .gpio_request_enable = rt2880_pmx_group_gpio_request_enable, ++}; ++ ++static struct pinctrl_desc rt2880_pctrl_desc = { ++ .owner = THIS_MODULE, ++ .name = "rt2880-pinmux", ++ .pctlops = &rt2880_pctrl_ops, ++ .pmxops = &rt2880_pmx_group_ops, ++}; ++ ++static struct rt2880_pmx_func gpio_func = { ++ .name = "gpio", ++}; ++ ++static int rt2880_pinmux_index(struct rt2880_priv *p) ++{ ++ struct rt2880_pmx_func **f; ++ struct rt2880_pmx_group *mux = p->groups; ++ int i, j, c = 0; ++ ++ /* count the mux functions */ ++ while (mux->name) { ++ p->group_count++; ++ mux++; ++ } ++ ++ /* allocate the group names array needed by the gpio function */ ++ p->group_names = devm_kzalloc(p->dev, sizeof(char *) * p->group_count, GFP_KERNEL); ++ if (!p->group_names) ++ return -1; ++ ++ for (i = 0; i < p->group_count; i++) { ++ p->group_names[i] = p->groups[i].name; ++ p->func_count += p->groups[i].func_count; ++ } ++ ++ /* we have a dummy function[0] for gpio */ ++ p->func_count++; ++ ++ /* allocate our function and group mapping index buffers */ ++ f = p->func = devm_kzalloc(p->dev, sizeof(struct rt2880_pmx_func) * p->func_count, GFP_KERNEL); ++ gpio_func.groups = devm_kzalloc(p->dev, sizeof(int) * p->group_count, GFP_KERNEL); ++ if (!f || !gpio_func.groups) ++ return -1; ++ ++ /* add a backpointer to the function so it knows its group */ ++ gpio_func.group_count = p->group_count; ++ for (i = 0; i < gpio_func.group_count; i++) ++ gpio_func.groups[i] = i; ++ ++ f[c] = &gpio_func; ++ c++; ++ ++ /* add remaining functions */ ++ for (i = 0; i < p->group_count; i++) { ++ for (j = 0; j < p->groups[i].func_count; j++) { ++ f[c] = &p->groups[i].func[j]; ++ f[c]->groups = devm_kzalloc(p->dev, sizeof(int), GFP_KERNEL); ++ f[c]->groups[0] = i; ++ f[c]->group_count = 1; ++ c++; ++ } ++ } ++ return 0; ++} ++ ++static int rt2880_pinmux_pins(struct rt2880_priv *p) ++{ ++ int i, j; ++ ++ /* loop over the functions and initialize the pins array. also work out the highest pin used */ ++ for (i = 0; i < p->func_count; i++) { ++ int pin; ++ ++ if (!p->func[i]->pin_count) ++ continue; ++ ++ p->func[i]->pins = devm_kzalloc(p->dev, sizeof(int) * p->func[i]->pin_count, GFP_KERNEL); ++ for (j = 0; j < p->func[i]->pin_count; j++) ++ p->func[i]->pins[j] = p->func[i]->pin_first + j; ++ ++ pin = p->func[i]->pin_first + p->func[i]->pin_count; ++ if (pin > p->max_pins) ++ p->max_pins = pin; ++ } ++ ++ /* the buffer that tells us which pins are gpio */ ++ p->gpio = devm_kzalloc(p->dev,sizeof(uint8_t) * p->max_pins, ++ GFP_KERNEL); ++ /* the pads needed to tell pinctrl about our pins */ ++ p->pads = devm_kzalloc(p->dev, ++ sizeof(struct pinctrl_pin_desc) * p->max_pins, ++ GFP_KERNEL); ++ if (!p->pads || !p->gpio ) { ++ dev_err(p->dev, "Failed to allocate gpio data\n"); ++ return -ENOMEM; ++ } ++ ++ memset(p->gpio, 1, sizeof(uint8_t) * p->max_pins); ++ for (i = 0; i < p->func_count; i++) { ++ if (!p->func[i]->pin_count) ++ continue; ++ ++ for (j = 0; j < p->func[i]->pin_count; j++) ++ p->gpio[p->func[i]->pins[j]] = 0; ++ } ++ ++ /* pin 0 is always a gpio */ ++ p->gpio[0] = 1; ++ ++ /* set the pads */ ++ for (i = 0; i < p->max_pins; i++) { ++ /* strlen("ioXY") + 1 = 5 */ ++ char *name = devm_kzalloc(p->dev, 5, GFP_KERNEL); ++ ++ if (!name) { ++ dev_err(p->dev, "Failed to allocate pad name\n"); ++ return -ENOMEM; ++ } ++ snprintf(name, 5, "io%d", i); ++ p->pads[i].number = i; ++ p->pads[i].name = name; ++ } ++ p->desc->pins = p->pads; ++ p->desc->npins = p->max_pins; ++ ++ return 0; ++} ++ ++static int rt2880_pinmux_probe(struct platform_device *pdev) ++{ ++ struct rt2880_priv *p; ++ struct pinctrl_dev *dev; ++ struct device_node *np; ++ ++ if (!rt2880_pinmux_data) ++ return -ENOSYS; ++ ++ /* setup the private data */ ++ p = devm_kzalloc(&pdev->dev, sizeof(struct rt2880_priv), GFP_KERNEL); ++ if (!p) ++ return -ENOMEM; ++ ++ p->dev = &pdev->dev; ++ p->desc = &rt2880_pctrl_desc; ++ p->groups = rt2880_pinmux_data; ++ platform_set_drvdata(pdev, p); ++ ++ /* init the device */ ++ if (rt2880_pinmux_index(p)) { ++ dev_err(&pdev->dev, "failed to load index\n"); ++ return -EINVAL; ++ } ++ if (rt2880_pinmux_pins(p)) { ++ dev_err(&pdev->dev, "failed to load pins\n"); ++ return -EINVAL; ++ } ++ dev = pinctrl_register(p->desc, &pdev->dev, p); ++ if (IS_ERR(dev)) ++ return PTR_ERR(dev); ++ ++ /* finalize by adding gpio ranges for enables gpio controllers */ ++ for_each_compatible_node(np, NULL, "ralink,rt2880-gpio") { ++ const __be32 *ngpio, *gpiobase; ++ struct pinctrl_gpio_range *range; ++ char *name; ++ ++ if (!of_device_is_available(np)) ++ continue; ++ ++ ngpio = of_get_property(np, "ralink,num-gpios", NULL); ++ gpiobase = of_get_property(np, "ralink,gpio-base", NULL); ++ if (!ngpio || !gpiobase) { ++ dev_err(&pdev->dev, "failed to load chip info\n"); ++ return -EINVAL; ++ } ++ ++ range = devm_kzalloc(p->dev, sizeof(struct pinctrl_gpio_range) + 4, GFP_KERNEL); ++ range->name = name = (char *) &range[1]; ++ sprintf(name, "pio"); ++ range->npins = __be32_to_cpu(*ngpio); ++ range->base = __be32_to_cpu(*gpiobase); ++ range->pin_base = range->base; ++ pinctrl_add_gpio_range(dev, range); ++ } ++ ++ return 0; ++} ++ ++static const struct of_device_id rt2880_pinmux_match[] = { ++ { .compatible = "ralink,rt2880-pinmux" }, ++ {}, ++}; ++MODULE_DEVICE_TABLE(of, rt2880_pinmux_match); ++ ++static struct platform_driver rt2880_pinmux_driver = { ++ .probe = rt2880_pinmux_probe, ++ .driver = { ++ .name = "rt2880-pinmux", ++ .owner = THIS_MODULE, ++ .of_match_table = rt2880_pinmux_match, ++ }, ++}; ++ ++int __init rt2880_pinmux_init(void) ++{ ++ return platform_driver_register(&rt2880_pinmux_driver); ++} ++ ++core_initcall_sync(rt2880_pinmux_init); diff --git a/target/linux/ramips/patches-3.10/0107-PCI-MIPS-adds-rt2880-pci-support.patch b/target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch index 7136f15852..521651f67a 100644 --- a/target/linux/ramips/patches-3.10/0107-PCI-MIPS-adds-rt2880-pci-support.patch +++ b/target/linux/ramips/patches-3.10/0114-PCI-MIPS-adds-rt2880-pci-support.patch @@ -1,7 +1,7 @@ -From 5d57ace094803c95230643941a47d749ff81d022 Mon Sep 17 00:00:00 2001 +From b7040c3ad7b8daf8309d083e9248cfa577075cfb Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Thu, 21 Mar 2013 18:27:29 +0100 -Subject: [PATCH 11/33] PCI: MIPS: adds rt2880 pci support +Subject: [PATCH 114/133] PCI: MIPS: adds rt2880 pci support Add support for the pci found on the rt2880 SoC. diff --git a/target/linux/ramips/patches-3.10/0108-PCI-MIPS-adds-mt7620a-pcie-driver.patch b/target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch index 2f883b302d..cff4017a45 100644 --- a/target/linux/ramips/patches-3.10/0108-PCI-MIPS-adds-mt7620a-pcie-driver.patch +++ b/target/linux/ramips/patches-3.10/0115-PCI-MIPS-adds-mt7620a-pcie-driver.patch @@ -1,7 +1,7 @@ -From ded577553b06a85c12a89b8fbcfa2b51f30bc037 Mon Sep 17 00:00:00 2001 +From 686f5642c74323f7e7eafb93c2b85df589cbf66e Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sat, 18 May 2013 22:06:15 +0200 -Subject: [PATCH 13/33] PCI: MIPS: adds mt7620a pcie driver +Subject: [PATCH 115/133] PCI: MIPS: adds mt7620a pcie driver Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -11,6 +11,16 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 365 insertions(+) create mode 100644 arch/mips/pci/pci-mt7620a.c +--- a/arch/mips/pci/Makefile ++++ b/arch/mips/pci/Makefile +@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1 + obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o ++obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o + obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o + obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o + obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o --- /dev/null +++ b/arch/mips/pci/pci-mt7620a.c @@ -0,0 +1,363 @@ @@ -387,13 +397,3 @@ Signed-off-by: John Crispin <blogic@openwrt.org> endchoice ---- a/arch/mips/pci/Makefile -+++ b/arch/mips/pci/Makefile -@@ -41,6 +41,7 @@ obj-$(CONFIG_SIBYTE_BCM1x80) += pci-bcm1 - obj-$(CONFIG_SNI_RM) += fixup-sni.o ops-sni.o - obj-$(CONFIG_LANTIQ) += fixup-lantiq.o - obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o -+obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o - obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o - obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o - obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o diff --git a/target/linux/ramips/patches-3.10/0109-NET-multi-phy-support.patch b/target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch index 345ee14434..218d0828dd 100644 --- a/target/linux/ramips/patches-3.10/0109-NET-multi-phy-support.patch +++ b/target/linux/ramips/patches-3.10/0116-NET-multi-phy-support.patch @@ -1,7 +1,7 @@ -From 7407b7d178e783074861a73da858b099f870270d Mon Sep 17 00:00:00 2001 +From bed88d4cb806d2738528cb7d368d6df79d9c1424 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sat, 11 May 2013 23:40:19 +0200 -Subject: [PATCH 14/33] NET: multi phy support +Subject: [PATCH 116/133] NET: multi phy support Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0110-NET-add-of_get_mac_address_mtd.patch b/target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch index 408326d40b..a48bd4b48d 100644 --- a/target/linux/ramips/patches-3.10/0110-NET-add-of_get_mac_address_mtd.patch +++ b/target/linux/ramips/patches-3.10/0117-NET-add-of_get_mac_address_mtd.patch @@ -1,7 +1,7 @@ -From 2a41724b2d0af9b4444572c4302570a3af377715 Mon Sep 17 00:00:00 2001 +From 1282a0da09e059288eb8b576998ea001680f6628 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 14 Jul 2013 23:26:15 +0200 -Subject: [PATCH 15/33] NET: add of_get_mac_address_mtd() +Subject: [PATCH 117/133] NET: add of_get_mac_address_mtd() Many embedded devices have information such as mac addresses stored inside mtd devices. This patch allows us to add a property inside a node describing a diff --git a/target/linux/ramips/patches-3.10/0111-NET-MIPS-add-ralink-SoC-ethernet-driver.patch b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch index 4d12424e91..103c8180f4 100644 --- a/target/linux/ramips/patches-3.10/0111-NET-MIPS-add-ralink-SoC-ethernet-driver.patch +++ b/target/linux/ramips/patches-3.10/0118-NET-MIPS-add-ralink-SoC-ethernet-driver.patch @@ -1,7 +1,7 @@ -From ad11aedcc16574c0b3d3f5e40c67227d1846b94e Mon Sep 17 00:00:00 2001 +From b7d9374aee4b47a76dadaf1fe7f6838087c9c62d Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 22 Apr 2013 23:20:03 +0200 -Subject: [PATCH 16/33] NET: MIPS: add ralink SoC ethernet driver +Subject: [PATCH 118/133] NET: MIPS: add ralink SoC ethernet driver Add support for Ralink FE and ESW. @@ -11,23 +11,25 @@ Signed-off-by: John Crispin <blogic@openwrt.org> arch/mips/ralink/rt305x.c | 1 + drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + - drivers/net/ethernet/ralink/Kconfig | 31 + + drivers/net/ethernet/ralink/Kconfig | 32 + drivers/net/ethernet/ralink/Makefile | 18 + drivers/net/ethernet/ralink/esw_rt3052.c | 1463 ++++++++++++++++++++ drivers/net/ethernet/ralink/esw_rt3052.h | 32 + - drivers/net/ethernet/ralink/gsw_mt7620a.c | 1027 ++++++++++++++ - drivers/net/ethernet/ralink/gsw_mt7620a.h | 29 + - drivers/net/ethernet/ralink/mdio.c | 245 ++++ + drivers/net/ethernet/ralink/gsw_mt7620a.c | 566 ++++++++ + drivers/net/ethernet/ralink/gsw_mt7620a.h | 30 + + drivers/net/ethernet/ralink/mdio.c | 244 ++++ drivers/net/ethernet/ralink/mdio.h | 29 + drivers/net/ethernet/ralink/mdio_rt2880.c | 232 ++++ drivers/net/ethernet/ralink/mdio_rt2880.h | 26 + - drivers/net/ethernet/ralink/ralink_soc_eth.c | 735 ++++++++++ - drivers/net/ethernet/ralink/ralink_soc_eth.h | 374 +++++ - drivers/net/ethernet/ralink/soc_mt7620.c | 111 ++ + drivers/net/ethernet/ralink/mt7530.c | 467 +++++++ + drivers/net/ethernet/ralink/mt7530.h | 20 + + drivers/net/ethernet/ralink/ralink_soc_eth.c | 845 +++++++++++ + drivers/net/ethernet/ralink/ralink_soc_eth.h | 384 +++++ + drivers/net/ethernet/ralink/soc_mt7620.c | 172 +++ drivers/net/ethernet/ralink/soc_rt2880.c | 51 + drivers/net/ethernet/ralink/soc_rt305x.c | 113 ++ drivers/net/ethernet/ralink/soc_rt3883.c | 60 + - 20 files changed, 4606 insertions(+) + 22 files changed, 4814 insertions(+) create mode 100644 arch/mips/include/asm/mach-ralink/rt305x_esw_platform.h create mode 100644 drivers/net/ethernet/ralink/Kconfig create mode 100644 drivers/net/ethernet/ralink/Makefile @@ -39,6 +41,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org> create mode 100644 drivers/net/ethernet/ralink/mdio.h create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.c create mode 100644 drivers/net/ethernet/ralink/mdio_rt2880.h + create mode 100644 drivers/net/ethernet/ralink/mt7530.c + create mode 100644 drivers/net/ethernet/ralink/mt7530.h create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.c create mode 100644 drivers/net/ethernet/ralink/ralink_soc_eth.h create mode 100644 drivers/net/ethernet/ralink/soc_mt7620.c @@ -78,7 +82,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#endif /* _RT305X_ESW_PLATFORM_H */ --- a/arch/mips/ralink/rt305x.c +++ b/arch/mips/ralink/rt305x.c -@@ -221,6 +221,7 @@ void __init ralink_clk_init(void) +@@ -194,6 +194,7 @@ void __init ralink_clk_init(void) } ralink_clk_add("cpu", cpu_rate); @@ -2809,8 +2813,501 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + +#endif --- /dev/null ++++ b/drivers/net/ethernet/ralink/mt7530.c +@@ -0,0 +1,467 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#include <linux/if.h> ++#include <linux/module.h> ++#include <linux/init.h> ++#include <linux/list.h> ++#include <linux/if_ether.h> ++#include <linux/skbuff.h> ++#include <linux/netdevice.h> ++#include <linux/netlink.h> ++#include <linux/bitops.h> ++#include <net/genetlink.h> ++#include <linux/switch.h> ++#include <linux/delay.h> ++#include <linux/phy.h> ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/lockdep.h> ++#include <linux/workqueue.h> ++#include <linux/of_device.h> ++ ++#include "mt7530.h" ++ ++#define MT7530_CPU_PORT 6 ++#define MT7530_NUM_PORTS 7 ++#define MT7530_NUM_VLANS 16 ++#define MT7530_NUM_VIDS 16 ++ ++#define REG_ESW_VLAN_VTCR 0x90 ++#define REG_ESW_VLAN_VAWD1 0x94 ++#define REG_ESW_VLAN_VAWD2 0x98 ++ ++enum { ++ /* Global attributes. */ ++ MT7530_ATTR_ENABLE_VLAN, ++}; ++ ++struct mt7530_port { ++ u16 pvid; ++}; ++ ++struct mt7530_vlan { ++ u8 ports; ++}; ++ ++struct mt7530_priv { ++ void __iomem *base; ++ struct mii_bus *bus; ++ struct switch_dev swdev; ++ ++ bool global_vlan_enable; ++ struct mt7530_vlan vlans[MT7530_NUM_VLANS]; ++ struct mt7530_port ports[MT7530_NUM_PORTS]; ++}; ++ ++struct mt7530_mapping { ++ char *name; ++ u8 pvids[6]; ++ u8 vlans[8]; ++} mt7530_defaults[] = { ++ { ++ .name = "llllw", ++ .pvids = { 1, 1, 1, 1, 2, 1 }, ++ .vlans = { 0, 0x6f, 0x50 }, ++ }, { ++ .name = "wllll", ++ .pvids = { 2, 1, 1, 1, 1, 1 }, ++ .vlans = { 0, 0x7e, 0x41 }, ++ }, ++}; ++ ++struct mt7530_mapping* ++mt7530_find_mapping(struct device_node *np) ++{ ++ const char *map; ++ int i; ++ ++ if (of_property_read_string(np, "ralink,port-map", &map)) ++ return NULL; ++ ++ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++) ++ if (!strcmp(map, mt7530_defaults[i].name)) ++ return &mt7530_defaults[i]; ++ ++ return NULL; ++} ++ ++static void ++mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map) ++{ ++ int i = 0; ++ ++ mt7530->global_vlan_enable = 1; ++ ++ for (i = 0; i < 6; i++) ++ mt7530->ports[i].pvid = map->pvids[i]; ++ for (i = 0; i < 8; i++) ++ mt7530->vlans[i].ports = map->vlans[i]; ++} ++ ++static int ++mt7530_reset_switch(struct switch_dev *dev) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ memset(priv->ports, 0, sizeof(priv->ports)); ++ memset(priv->vlans, 0, sizeof(priv->vlans)); ++ ++ return 0; ++} ++ ++static int ++mt7530_get_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ val->value.i = priv->global_vlan_enable; ++ ++ return 0; ++} ++ ++static int ++mt7530_set_vlan_enable(struct switch_dev *dev, ++ const struct switch_attr *attr, ++ struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ priv->global_vlan_enable = val->value.i != 0; ++ ++ return 0; ++} ++ ++static u32 ++mt7530_r32(struct mt7530_priv *priv, u32 reg) ++{ ++ if (priv->bus) { ++ u16 high, low; ++ ++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); ++ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf); ++ high = mdiobus_read(priv->bus, 0x1f, 0x10); ++ ++ return (high << 16) | (low & 0xffff); ++ } ++ ++ return ioread32(priv->base + reg); ++} ++ ++static void ++mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val) ++{ ++ if (priv->bus) { ++ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); ++ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff); ++ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16); ++ return; ++ } ++ ++ iowrite32(val, priv->base + reg); ++} ++ ++static void ++mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val) ++{ ++ int i; ++ ++ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val); ++ ++ for (i = 0; i < 20; i++) { ++ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR); ++ ++ if ((val & BIT(31)) == 0) ++ break; ++ ++ udelay(1000); ++ } ++ if (i == 20) ++ printk("mt7530: vtcr timeout\n"); ++} ++ ++static int ++mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ if (port >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ *val = mt7530_r32(priv, 0x2014 + (0x100 * port)); ++ *val &= 0xff; ++ ++ return 0; ++} ++ ++static int ++mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ ++ if (port >= MT7530_NUM_PORTS) ++ return -1; ++ ++ priv->ports[port].pvid = pvid; ++ ++ return 0; ++} ++ ++static int ++mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u32 member; ++ int i; ++ ++ val->len = 0; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VIDS) ++ return -EINVAL; ++ ++ mt7530_vtcr(priv, 0, val->port_vlan); ++ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1); ++ member >>= 16; ++ member &= 0xff; ++ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) { ++ struct switch_port *p; ++ if (!(member & BIT(i))) ++ continue; ++ ++ p = &val->value.ports[val->len++]; ++ p->id = i; ++ p->flags = 0; ++ } ++ ++ return 0; ++} ++ ++static int ++mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ int ports = 0; ++ int i; ++ ++ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VIDS || ++ val->len > MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ for (i = 0; i < val->len; i++) { ++ struct switch_port *p = &val->value.ports[i]; ++ ++ if (p->id >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ ports |= BIT(p->id); ++ } ++ priv->vlans[val->port_vlan].ports = ports; ++ ++ return 0; ++} ++ ++static int ++mt7530_apply_config(struct switch_dev *dev) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ int i; ++ ++ if (!priv->global_vlan_enable) { ++ mt7530_w32(priv, 0x2004, 0xff000); ++ mt7530_w32(priv, 0x2104, 0xff000); ++ mt7530_w32(priv, 0x2204, 0xff000); ++ mt7530_w32(priv, 0x2304, 0xff000); ++ mt7530_w32(priv, 0x2404, 0xff000); ++ mt7530_w32(priv, 0x2504, 0xff000); ++ mt7530_w32(priv, 0x2604, 0xff000); ++ mt7530_w32(priv, 0x2010, 0x810000c); ++ mt7530_w32(priv, 0x2110, 0x810000c); ++ mt7530_w32(priv, 0x2210, 0x810000c); ++ mt7530_w32(priv, 0x2310, 0x810000c); ++ mt7530_w32(priv, 0x2410, 0x810000c); ++ mt7530_w32(priv, 0x2510, 0x810000c); ++ mt7530_w32(priv, 0x2610, 0x810000c); ++ return 0; ++ } ++ ++ // LAN/WAN ports as security mode ++ mt7530_w32(priv, 0x2004, 0xff0003); ++ mt7530_w32(priv, 0x2104, 0xff0003); ++ mt7530_w32(priv, 0x2204, 0xff0003); ++ mt7530_w32(priv, 0x2304, 0xff0003); ++ mt7530_w32(priv, 0x2404, 0xff0003); ++ mt7530_w32(priv, 0x2504, 0xff0003); ++ // LAN/WAN ports as transparent port ++ mt7530_w32(priv, 0x2010, 0x810000c0); ++ mt7530_w32(priv, 0x2110, 0x810000c0); ++ mt7530_w32(priv, 0x2210, 0x810000c0); ++ mt7530_w32(priv, 0x2310, 0x810000c0); ++ mt7530_w32(priv, 0x2410, 0x810000c0); ++ mt7530_w32(priv, 0x2510, 0x810000c0); ++ ++ // set CPU/P7 port as user port ++ mt7530_w32(priv, 0x2610, 0x81000000); ++ mt7530_w32(priv, 0x2710, 0x81000000); ++ ++ mt7530_w32(priv, 0x2604, 0x20ff0003); ++ mt7530_w32(priv, 0x2704, 0x20ff0003); ++ mt7530_w32(priv, 0x2610, 0x81000000); ++ ++ for (i = 0; i < MT7530_NUM_VLANS; i++) { ++ u8 ports = priv->vlans[i].ports; ++ u32 val = mt7530_r32(priv, 0x100 + 4 * (i / 2)); ++ ++ if (i % 2 == 0) { ++ val &= 0xfff000; ++ val |= i; ++ } else { ++ val &= 0xfff; ++ val |= (i << 12); ++ } ++ mt7530_w32(priv, 0x100 + 4 * (i / 2), val); ++ ++ if (ports) ++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, BIT(30) | (ports << 16) | BIT(0)); ++ else ++ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0); ++ ++ mt7530_vtcr(priv, 1, i); ++ } ++ ++ for (i = 0; i < MT7530_NUM_PORTS; i++) ++ mt7530_w32(priv, 0x2014 + (0x100 * i), 0x10000 | priv->ports[i].pvid); ++ ++ return 0; ++} ++ ++static int ++mt7530_get_port_link(struct switch_dev *dev, int port, ++ struct switch_port_link *link) ++{ ++ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); ++ u32 speed, pmsr; ++ ++ if (port < 0 || port >= MT7530_NUM_PORTS) ++ return -EINVAL; ++ ++ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port)); ++ ++ link->link = pmsr & 1; ++ link->duplex = (pmsr >> 1) & 1; ++ speed = (pmsr >> 2) & 3; ++ ++ switch (speed) { ++ case 0: ++ link->speed = SWITCH_PORT_SPEED_10; ++ break; ++ case 1: ++ link->speed = SWITCH_PORT_SPEED_100; ++ break; ++ case 2: ++ case 3: /* forced gige speed can be 2 or 3 */ ++ link->speed = SWITCH_PORT_SPEED_1000; ++ break; ++ default: ++ link->speed = SWITCH_PORT_SPEED_UNKNOWN; ++ break; ++ } ++ ++ return 0; ++} ++ ++static const struct switch_attr mt7530_global[] = { ++ { ++ .type = SWITCH_TYPE_INT, ++ .name = "enable_vlan", ++ .description = "VLAN mode (1:enabled)", ++ .max = 1, ++ .id = MT7530_ATTR_ENABLE_VLAN, ++ .get = mt7530_get_vlan_enable, ++ .set = mt7530_set_vlan_enable, ++ }, ++}; ++ ++static const struct switch_attr mt7530_port[] = { ++}; ++ ++static const struct switch_attr mt7530_vlan[] = { ++}; ++ ++static const struct switch_dev_ops mt7530_ops = { ++ .attr_global = { ++ .attr = mt7530_global, ++ .n_attr = ARRAY_SIZE(mt7530_global), ++ }, ++ .attr_port = { ++ .attr = mt7530_port, ++ .n_attr = ARRAY_SIZE(mt7530_port), ++ }, ++ .attr_vlan = { ++ .attr = mt7530_vlan, ++ .n_attr = ARRAY_SIZE(mt7530_vlan), ++ }, ++ .get_vlan_ports = mt7530_get_vlan_ports, ++ .set_vlan_ports = mt7530_set_vlan_ports, ++ .get_port_pvid = mt7530_get_port_pvid, ++ .set_port_pvid = mt7530_set_port_pvid, ++ .get_port_link = mt7530_get_port_link, ++ .apply_config = mt7530_apply_config, ++ .reset_switch = mt7530_reset_switch, ++}; ++ ++int ++mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus) ++{ ++ struct switch_dev *swdev; ++ struct mt7530_priv *mt7530; ++ struct mt7530_mapping *map; ++ int ret; ++ ++ if (bus && bus->phy_map[0x1f]->phy_id != 0x1beef) ++ return 0; ++ ++ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL); ++ if (!mt7530) ++ return -ENOMEM; ++ ++ mt7530->base = base; ++ mt7530->bus = bus; ++ mt7530->global_vlan_enable = 1; ++ ++ swdev = &mt7530->swdev; ++ swdev->name = "mt7530"; ++ swdev->alias = "mt7530"; ++ swdev->cpu_port = MT7530_CPU_PORT; ++ swdev->ports = MT7530_NUM_PORTS; ++ swdev->vlans = MT7530_NUM_VLANS; ++ swdev->ops = &mt7530_ops; ++ ++ ret = register_switch(swdev, NULL); ++ if (ret) { ++ dev_err(dev, "failed to register mt7530\n"); ++ return ret; ++ } ++ ++ dev_info(dev, "loaded mt7530 driver\n"); ++ ++ map = mt7530_find_mapping(dev->of_node); ++ if (map) ++ mt7530_apply_mapping(mt7530, map); ++ mt7530_apply_config(swdev); ++ ++ return 0; ++} +--- /dev/null ++++ b/drivers/net/ethernet/ralink/mt7530.h +@@ -0,0 +1,20 @@ ++/* ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License ++ * as published by the Free Software Foundation; either version 2 ++ * of the License, or (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> ++ */ ++ ++#ifndef _MT7530_H__ ++#define _MT7530_H__ ++ ++int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus); ++ ++#endif +--- /dev/null +++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c -@@ -0,0 +1,846 @@ +@@ -0,0 +1,845 @@ +/* + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by @@ -3148,7 +3645,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + if (priv->soc->tso) + fe_start_tso(skb, dev, nr_frags, tx); + -+ if (skb_shinfo(skb)->gso_segs > 1) { ++ if (priv->soc->tso && (skb_shinfo(skb)->gso_segs > 1)) { + struct iphdr *iph = NULL; + struct tcphdr *th = NULL; + struct ipv6hdr *ip6h = NULL; @@ -3554,8 +4051,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + dev_info(&pdev->dev, "Enabling TSO\n"); + netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM; + } -+ -+ netdev->hw_features = netdev->vlan_features = netdev->features; ++ netdev->hw_features = netdev->features; + + netdev->irq = platform_get_irq(pdev, 0); + if (netdev->irq < 0) { @@ -4452,496 +4948,3 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + +MODULE_DEVICE_TABLE(of, of_fe_match); + ---- /dev/null -+++ b/drivers/net/ethernet/ralink/mt7530.c -@@ -0,0 +1,467 @@ -+/* -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> -+ */ -+ -+#include <linux/if.h> -+#include <linux/module.h> -+#include <linux/init.h> -+#include <linux/list.h> -+#include <linux/if_ether.h> -+#include <linux/skbuff.h> -+#include <linux/netdevice.h> -+#include <linux/netlink.h> -+#include <linux/bitops.h> -+#include <net/genetlink.h> -+#include <linux/switch.h> -+#include <linux/delay.h> -+#include <linux/phy.h> -+#include <linux/netdevice.h> -+#include <linux/etherdevice.h> -+#include <linux/lockdep.h> -+#include <linux/workqueue.h> -+#include <linux/of_device.h> -+ -+#include "mt7530.h" -+ -+#define MT7530_CPU_PORT 6 -+#define MT7530_NUM_PORTS 7 -+#define MT7530_NUM_VLANS 16 -+#define MT7530_NUM_VIDS 16 -+ -+#define REG_ESW_VLAN_VTCR 0x90 -+#define REG_ESW_VLAN_VAWD1 0x94 -+#define REG_ESW_VLAN_VAWD2 0x98 -+ -+enum { -+ /* Global attributes. */ -+ MT7530_ATTR_ENABLE_VLAN, -+}; -+ -+struct mt7530_port { -+ u16 pvid; -+}; -+ -+struct mt7530_vlan { -+ u8 ports; -+}; -+ -+struct mt7530_priv { -+ void __iomem *base; -+ struct mii_bus *bus; -+ struct switch_dev swdev; -+ -+ bool global_vlan_enable; -+ struct mt7530_vlan vlans[MT7530_NUM_VLANS]; -+ struct mt7530_port ports[MT7530_NUM_PORTS]; -+}; -+ -+struct mt7530_mapping { -+ char *name; -+ u8 pvids[6]; -+ u8 vlans[8]; -+} mt7530_defaults[] = { -+ { -+ .name = "llllw", -+ .pvids = { 1, 1, 1, 1, 2, 1 }, -+ .vlans = { 0, 0x6f, 0x50 }, -+ }, { -+ .name = "wllll", -+ .pvids = { 2, 1, 1, 1, 1, 1 }, -+ .vlans = { 0, 0x7e, 0x41 }, -+ }, -+}; -+ -+struct mt7530_mapping* -+mt7530_find_mapping(struct device_node *np) -+{ -+ const char *map; -+ int i; -+ -+ if (of_property_read_string(np, "ralink,port-map", &map)) -+ return NULL; -+ -+ for (i = 0; i < ARRAY_SIZE(mt7530_defaults); i++) -+ if (!strcmp(map, mt7530_defaults[i].name)) -+ return &mt7530_defaults[i]; -+ -+ return NULL; -+} -+ -+static void -+mt7530_apply_mapping(struct mt7530_priv *mt7530, struct mt7530_mapping *map) -+{ -+ int i = 0; -+ -+ mt7530->global_vlan_enable = 1; -+ -+ for (i = 0; i < 6; i++) -+ mt7530->ports[i].pvid = map->pvids[i]; -+ for (i = 0; i < 8; i++) -+ mt7530->vlans[i].ports = map->vlans[i]; -+} -+ -+static int -+mt7530_reset_switch(struct switch_dev *dev) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ -+ memset(priv->ports, 0, sizeof(priv->ports)); -+ memset(priv->vlans, 0, sizeof(priv->vlans)); -+ -+ return 0; -+} -+ -+static int -+mt7530_get_vlan_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ -+ val->value.i = priv->global_vlan_enable; -+ -+ return 0; -+} -+ -+static int -+mt7530_set_vlan_enable(struct switch_dev *dev, -+ const struct switch_attr *attr, -+ struct switch_val *val) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ -+ priv->global_vlan_enable = val->value.i != 0; -+ -+ return 0; -+} -+ -+static u32 -+mt7530_r32(struct mt7530_priv *priv, u32 reg) -+{ -+ if (priv->bus) { -+ u16 high, low; -+ -+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); -+ low = mdiobus_read(priv->bus, 0x1f, (reg >> 2) & 0xf); -+ high = mdiobus_read(priv->bus, 0x1f, 0x10); -+ -+ return (high << 16) | (low & 0xffff); -+ } -+ -+ return ioread32(priv->base + reg); -+} -+ -+static void -+mt7530_w32(struct mt7530_priv *priv, u32 reg, u32 val) -+{ -+ if (priv->bus) { -+ mdiobus_write(priv->bus, 0x1f, 0x1f, (reg >> 6) & 0x3ff); -+ mdiobus_write(priv->bus, 0x1f, (reg >> 2) & 0xf, val & 0xffff); -+ mdiobus_write(priv->bus, 0x1f, 0x10, val >> 16); -+ return; -+ } -+ -+ iowrite32(val, priv->base + reg); -+} -+ -+static void -+mt7530_vtcr(struct mt7530_priv *priv, u32 cmd, u32 val) -+{ -+ int i; -+ -+ mt7530_w32(priv, REG_ESW_VLAN_VTCR, BIT(31) | (cmd << 12) | val); -+ -+ for (i = 0; i < 20; i++) { -+ u32 val = mt7530_r32(priv, REG_ESW_VLAN_VTCR); -+ -+ if ((val & BIT(31)) == 0) -+ break; -+ -+ udelay(1000); -+ } -+ if (i == 20) -+ printk("mt7530: vtcr timeout\n"); -+} -+ -+static int -+mt7530_get_port_pvid(struct switch_dev *dev, int port, int *val) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ -+ if (port >= MT7530_NUM_PORTS) -+ return -EINVAL; -+ -+ *val = mt7530_r32(priv, 0x2014 + (0x100 * port)); -+ *val &= 0xff; -+ -+ return 0; -+} -+ -+static int -+mt7530_set_port_pvid(struct switch_dev *dev, int port, int pvid) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ -+ if (port >= MT7530_NUM_PORTS) -+ return -1; -+ -+ priv->ports[port].pvid = pvid; -+ -+ return 0; -+} -+ -+static int -+mt7530_get_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ u32 member; -+ int i; -+ -+ val->len = 0; -+ -+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VIDS) -+ return -EINVAL; -+ -+ mt7530_vtcr(priv, 0, val->port_vlan); -+ member = mt7530_r32(priv, REG_ESW_VLAN_VAWD1); -+ member >>= 16; -+ member &= 0xff; -+ -+ for (i = 0; i < MT7530_NUM_PORTS; i++) { -+ struct switch_port *p; -+ if (!(member & BIT(i))) -+ continue; -+ -+ p = &val->value.ports[val->len++]; -+ p->id = i; -+ p->flags = 0; -+ } -+ -+ return 0; -+} -+ -+static int -+mt7530_set_vlan_ports(struct switch_dev *dev, struct switch_val *val) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ int ports = 0; -+ int i; -+ -+ if (val->port_vlan < 0 || val->port_vlan >= MT7530_NUM_VIDS || -+ val->len > MT7530_NUM_PORTS) -+ return -EINVAL; -+ -+ for (i = 0; i < val->len; i++) { -+ struct switch_port *p = &val->value.ports[i]; -+ -+ if (p->id >= MT7530_NUM_PORTS) -+ return -EINVAL; -+ -+ ports |= BIT(p->id); -+ } -+ priv->vlans[val->port_vlan].ports = ports; -+ -+ return 0; -+} -+ -+static int -+mt7530_apply_config(struct switch_dev *dev) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ int i; -+ -+ if (!priv->global_vlan_enable) { -+ mt7530_w32(priv, 0x2004, 0xff000); -+ mt7530_w32(priv, 0x2104, 0xff000); -+ mt7530_w32(priv, 0x2204, 0xff000); -+ mt7530_w32(priv, 0x2304, 0xff000); -+ mt7530_w32(priv, 0x2404, 0xff000); -+ mt7530_w32(priv, 0x2504, 0xff000); -+ mt7530_w32(priv, 0x2604, 0xff000); -+ mt7530_w32(priv, 0x2010, 0x810000c); -+ mt7530_w32(priv, 0x2110, 0x810000c); -+ mt7530_w32(priv, 0x2210, 0x810000c); -+ mt7530_w32(priv, 0x2310, 0x810000c); -+ mt7530_w32(priv, 0x2410, 0x810000c); -+ mt7530_w32(priv, 0x2510, 0x810000c); -+ mt7530_w32(priv, 0x2610, 0x810000c); -+ return 0; -+ } -+ -+ // LAN/WAN ports as security mode -+ mt7530_w32(priv, 0x2004, 0xff0003); -+ mt7530_w32(priv, 0x2104, 0xff0003); -+ mt7530_w32(priv, 0x2204, 0xff0003); -+ mt7530_w32(priv, 0x2304, 0xff0003); -+ mt7530_w32(priv, 0x2404, 0xff0003); -+ mt7530_w32(priv, 0x2504, 0xff0003); -+ // LAN/WAN ports as transparent port -+ mt7530_w32(priv, 0x2010, 0x810000c0); -+ mt7530_w32(priv, 0x2110, 0x810000c0); -+ mt7530_w32(priv, 0x2210, 0x810000c0); -+ mt7530_w32(priv, 0x2310, 0x810000c0); -+ mt7530_w32(priv, 0x2410, 0x810000c0); -+ mt7530_w32(priv, 0x2510, 0x810000c0); -+ -+ // set CPU/P7 port as user port -+ mt7530_w32(priv, 0x2610, 0x81000000); -+ mt7530_w32(priv, 0x2710, 0x81000000); -+ -+ mt7530_w32(priv, 0x2604, 0x20ff0003); -+ mt7530_w32(priv, 0x2704, 0x20ff0003); -+ mt7530_w32(priv, 0x2610, 0x81000000); -+ -+ for (i = 0; i < MT7530_NUM_VLANS; i++) { -+ u8 ports = priv->vlans[i].ports; -+ u32 val = mt7530_r32(priv, 0x100 + 4 * (i / 2)); -+ -+ if (i % 2 == 0) { -+ val &= 0xfff000; -+ val |= i; -+ } else { -+ val &= 0xfff; -+ val |= (i << 12); -+ } -+ mt7530_w32(priv, 0x100 + 4 * (i / 2), val); -+ -+ if (ports) -+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, BIT(30) | (ports << 16) | BIT(0)); -+ else -+ mt7530_w32(priv, REG_ESW_VLAN_VAWD1, 0); -+ -+ mt7530_vtcr(priv, 1, i); -+ } -+ -+ for (i = 0; i < MT7530_NUM_PORTS; i++) -+ mt7530_w32(priv, 0x2014 + (0x100 * i), 0x10000 | priv->ports[i].pvid); -+ -+ return 0; -+} -+ -+static int -+mt7530_get_port_link(struct switch_dev *dev, int port, -+ struct switch_port_link *link) -+{ -+ struct mt7530_priv *priv = container_of(dev, struct mt7530_priv, swdev); -+ u32 speed, pmsr; -+ -+ if (port < 0 || port >= MT7530_NUM_PORTS) -+ return -EINVAL; -+ -+ pmsr = mt7530_r32(priv, 0x3008 + (0x100 * port)); -+ -+ link->link = pmsr & 1; -+ link->duplex = (pmsr >> 1) & 1; -+ speed = (pmsr >> 2) & 3; -+ -+ switch (speed) { -+ case 0: -+ link->speed = SWITCH_PORT_SPEED_10; -+ break; -+ case 1: -+ link->speed = SWITCH_PORT_SPEED_100; -+ break; -+ case 2: -+ case 3: /* forced gige speed can be 2 or 3 */ -+ link->speed = SWITCH_PORT_SPEED_1000; -+ break; -+ default: -+ link->speed = SWITCH_PORT_SPEED_UNKNOWN; -+ break; -+ } -+ -+ return 0; -+} -+ -+static const struct switch_attr mt7530_global[] = { -+ { -+ .type = SWITCH_TYPE_INT, -+ .name = "enable_vlan", -+ .description = "VLAN mode (1:enabled)", -+ .max = 1, -+ .id = MT7530_ATTR_ENABLE_VLAN, -+ .get = mt7530_get_vlan_enable, -+ .set = mt7530_set_vlan_enable, -+ }, -+}; -+ -+static const struct switch_attr mt7530_port[] = { -+}; -+ -+static const struct switch_attr mt7530_vlan[] = { -+}; -+ -+static const struct switch_dev_ops mt7530_ops = { -+ .attr_global = { -+ .attr = mt7530_global, -+ .n_attr = ARRAY_SIZE(mt7530_global), -+ }, -+ .attr_port = { -+ .attr = mt7530_port, -+ .n_attr = ARRAY_SIZE(mt7530_port), -+ }, -+ .attr_vlan = { -+ .attr = mt7530_vlan, -+ .n_attr = ARRAY_SIZE(mt7530_vlan), -+ }, -+ .get_vlan_ports = mt7530_get_vlan_ports, -+ .set_vlan_ports = mt7530_set_vlan_ports, -+ .get_port_pvid = mt7530_get_port_pvid, -+ .set_port_pvid = mt7530_set_port_pvid, -+ .get_port_link = mt7530_get_port_link, -+ .apply_config = mt7530_apply_config, -+ .reset_switch = mt7530_reset_switch, -+}; -+ -+int -+mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus) -+{ -+ struct switch_dev *swdev; -+ struct mt7530_priv *mt7530; -+ struct mt7530_mapping *map; -+ int ret; -+ -+ if (bus && bus->phy_map[0x1f]->phy_id != 0x1beef) -+ return 0; -+ -+ mt7530 = devm_kzalloc(dev, sizeof(struct mt7530_priv), GFP_KERNEL); -+ if (!mt7530) -+ return -ENOMEM; -+ -+ mt7530->base = base; -+ mt7530->bus = bus; -+ mt7530->global_vlan_enable = 1; -+ -+ swdev = &mt7530->swdev; -+ swdev->name = "mt7530"; -+ swdev->alias = "mt7530"; -+ swdev->cpu_port = MT7530_CPU_PORT; -+ swdev->ports = MT7530_NUM_PORTS; -+ swdev->vlans = MT7530_NUM_VLANS; -+ swdev->ops = &mt7530_ops; -+ -+ ret = register_switch(swdev, NULL); -+ if (ret) { -+ dev_err(dev, "failed to register mt7530\n"); -+ return ret; -+ } -+ -+ dev_info(dev, "loaded mt7530 driver\n"); -+ -+ map = mt7530_find_mapping(dev->of_node); -+ if (map) -+ mt7530_apply_mapping(mt7530, map); -+ mt7530_apply_config(swdev); -+ -+ return 0; -+} ---- /dev/null -+++ b/drivers/net/ethernet/ralink/mt7530.h -@@ -0,0 +1,20 @@ -+/* -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Copyright (C) 2013 John Crispin <blogic@openwrt.org> -+ */ -+ -+#ifndef _MT7530_H__ -+#define _MT7530_H__ -+ -+int mt7530_probe(struct device *dev, void __iomem *base, struct mii_bus *bus); -+ -+#endif diff --git a/target/linux/ramips/patches-3.10/0112-USB-phy-add-ralink-SoC-driver.patch b/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch index ddfc856687..fbec32cacb 100644 --- a/target/linux/ramips/patches-3.10/0112-USB-phy-add-ralink-SoC-driver.patch +++ b/target/linux/ramips/patches-3.10/0119-USB-phy-add-ralink-SoC-driver.patch @@ -1,7 +1,7 @@ -From c5f51197b13fd312324ac0486a46e530e163eade Mon Sep 17 00:00:00 2001 +From 71e09658d3544143e46ae76e76da8a322cd73e1d Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 14 Jul 2013 23:31:19 +0200 -Subject: [PATCH 18/33] USB: phy: add ralink SoC driver +Subject: [PATCH 119/133] USB: phy: add ralink SoC driver Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0113-USB-add-OHCI-EHCI-OF-binding.patch b/target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch index f963139a2a..6d18894b62 100644 --- a/target/linux/ramips/patches-3.10/0113-USB-add-OHCI-EHCI-OF-binding.patch +++ b/target/linux/ramips/patches-3.10/0120-USB-add-OHCI-EHCI-OF-binding.patch @@ -1,17 +1,16 @@ -From 40b9d3026ed0b3bcd59f90391195df5b2adabad2 Mon Sep 17 00:00:00 2001 +From 08d438b69f3023f16b044b07eebee6b9c2302f60 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 14 Jul 2013 23:34:53 +0200 -Subject: [PATCH 19/33] USB: add OHCI/EHCI OF binding +Subject: [PATCH 120/133] USB: add OHCI/EHCI OF binding based on f3bc64d6d1f21c1b92d75f233a37b75d77af6963 Signed-off-by: John Crispin <blogic@openwrt.org> --- - arch/mips/ralink/Kconfig | 2 ++ drivers/usb/Makefile | 3 ++- - drivers/usb/host/ehci-platform.c | 19 +++++++++++++++---- + drivers/usb/host/ehci-platform.c | 21 +++++++++++++++++---- drivers/usb/host/ohci-platform.c | 37 ++++++++++++++++++++++++++++++++----- - 4 files changed, 51 insertions(+), 10 deletions(-) + 3 files changed, 51 insertions(+), 10 deletions(-) --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile diff --git a/target/linux/ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch b/target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch index 5c17a665fa..8267452c0d 100644 --- a/target/linux/ramips/patches-3.10/0202-owrt-USB-adds-dwc_otg.patch +++ b/target/linux/ramips/patches-3.10/0121-USB-adds-dwc_otg.patch @@ -1,7 +1,7 @@ -From 1a44a003bdaf917193114d0d40534496c39644ba Mon Sep 17 00:00:00 2001 +From b74db0e9bae6bbe14e9f725db855621db22e9984 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Fri, 15 Mar 2013 20:58:18 +0100 -Subject: [PATCH 202/208] owrt: USB: adds dwc_otg +Subject: [PATCH 121/133] USB: adds dwc_otg Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0114-serial-ralink-adds-mt7620-serial.patch b/target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch index 2772aef738..f0b2e66b97 100644 --- a/target/linux/ramips/patches-3.10/0114-serial-ralink-adds-mt7620-serial.patch +++ b/target/linux/ramips/patches-3.10/0122-serial-ralink-adds-mt7620-serial.patch @@ -1,7 +1,7 @@ -From 629a2ca61e0fbf331f88692038391d22f21b7c70 Mon Sep 17 00:00:00 2001 +From 16f476a7528eefade4bd4ebee12d5aa2052bba8c Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Fri, 15 Mar 2013 18:16:01 +0100 -Subject: [PATCH 20/33] serial: ralink: adds mt7620 serial +Subject: [PATCH 122/133] serial: ralink: adds mt7620 serial Add the config symbol for Mediatek7620 SoC to SERIAL_8250_RT288X diff --git a/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch b/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch new file mode 100644 index 0000000000..b7c9987807 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0123-serial-ralink-the-core-has-a-size-of-0x100-and-not-0.patch @@ -0,0 +1,22 @@ +From 304c4f060cfa6b44370ad3fe6a16963cac35b10a Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 04:52:01 +0000 +Subject: [PATCH 123/133] serial: ralink: the core has a size of 0x100 and not + 0x1000 + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/tty/serial/8250/8250_core.c | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +--- a/drivers/tty/serial/8250/8250_core.c ++++ b/drivers/tty/serial/8250/8250_core.c +@@ -2499,7 +2499,7 @@ serial8250_pm(struct uart_port *port, un + static unsigned int serial8250_port_size(struct uart_8250_port *pt) + { + if (pt->port.iotype == UPIO_AU) +- return 0x1000; ++ return 0x100; + if (is_omap1_8250(pt)) + return 0x16 << pt->port.regshift; + diff --git a/target/linux/ramips/patches-3.10/0115-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch b/target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch index b12817e000..8bd00e93d9 100644 --- a/target/linux/ramips/patches-3.10/0115-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch +++ b/target/linux/ramips/patches-3.10/0124-serial-of-allow-au1x00-and-rt288x-to-load-from-OF.patch @@ -1,7 +1,7 @@ -From 53b934f796611b9a27b698429f1aaec0fe678693 Mon Sep 17 00:00:00 2001 +From 3f70be332048f6a903dc35f73ff5381be3b8f12b Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 14 Jul 2013 23:18:57 +0200 -Subject: [PATCH 21/33] serial: of: allow au1x00 and rt288x to load from OF +Subject: [PATCH 124/133] serial: of: allow au1x00 and rt288x to load from OF In order to make serial_8250 loadable via OF on Au1x00 and Ralink WiSoC we need to default the iotype to UPIO_AU. diff --git a/target/linux/ramips/patches-3.10/0116-i2c-MIPS-adds-ralink-I2C-driver.patch b/target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch index f8f86c00ff..bb5f492bde 100644 --- a/target/linux/ramips/patches-3.10/0116-i2c-MIPS-adds-ralink-I2C-driver.patch +++ b/target/linux/ramips/patches-3.10/0125-i2c-MIPS-adds-ralink-I2C-driver.patch @@ -1,7 +1,7 @@ -From 4596818bca07e0928168970839e08875cf51b4cc Mon Sep 17 00:00:00 2001 +From 701cd2fb0513d17f248048b3a6f2c7d1ea294681 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 29 Apr 2013 14:40:43 +0200 -Subject: [PATCH 26/33] i2c: MIPS: adds ralink I2C driver +Subject: [PATCH 125/133] i2c: MIPS: adds ralink I2C driver Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0120-spi-introduce-macros-to-set-bits_per_word_mask.patch b/target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch index a163d497f8..1dcba05078 100644 --- a/target/linux/ramips/patches-3.10/0120-spi-introduce-macros-to-set-bits_per_word_mask.patch +++ b/target/linux/ramips/patches-3.10/0126-spi-introduce-macros-to-set-bits_per_word_mask.patch @@ -1,7 +1,7 @@ -From 2922a8de996956893bb98e4aa91be9774c958336 Mon Sep 17 00:00:00 2001 +From b07600f50efe84d7e3b431e6d10fe774bb00d573 Mon Sep 17 00:00:00 2001 From: Stephen Warren <swarren@wwwdotorg.org> Date: Tue, 21 May 2013 20:36:34 -0600 -Subject: [PATCH] spi: introduce macros to set bits_per_word_mask +Subject: [PATCH 126/133] spi: introduce macros to set bits_per_word_mask Introduce two macros to make setting up spi_master.bits_per_word_mask easier, and avoid mistakes like writing BIT(n) instead of BIT(n - 1). diff --git a/target/linux/ramips/patches-3.10/0117-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch b/target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch index 4950a701fb..3985718dc6 100644 --- a/target/linux/ramips/patches-3.10/0117-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch +++ b/target/linux/ramips/patches-3.10/0127-mmc-MIPS-ralink-add-sdhci-for-mt7620a-SoC.patch @@ -1,7 +1,7 @@ -From de1defdad7554d6ba885a6d3dc55105e01e9a07e Mon Sep 17 00:00:00 2001 +From 759e011e67792898799fb54340ba5bad944274a1 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Thu, 2 May 2013 14:59:01 +0200 -Subject: [PATCH 27/33] mmc: MIPS: ralink: add sdhci for mt7620a SoC +Subject: [PATCH 127/133] mmc: MIPS: ralink: add sdhci for mt7620a SoC Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0118-mtd-fix-cfi-cmdset-0002-erase-status-check.patch b/target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch index 709d1d8271..18ba4cc6b2 100644 --- a/target/linux/ramips/patches-3.10/0118-mtd-fix-cfi-cmdset-0002-erase-status-check.patch +++ b/target/linux/ramips/patches-3.10/0128-mtd-fix-cfi-cmdset-0002-erase-status-check.patch @@ -1,7 +1,7 @@ -From 413b2ed67d8e4dc1242edb9286ea3f634d10a6ba Mon Sep 17 00:00:00 2001 +From 543f839e6fbeb325e6fa201e205ab18a46e37424 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 15 Jul 2013 00:38:51 +0200 -Subject: [PATCH 32/33] mtd: fix cfi cmdset 0002 erase status check +Subject: [PATCH 128/133] mtd: fix cfi cmdset 0002 erase status check --- drivers/mtd/chips/cfi_cmdset_0002.c | 4 ++-- diff --git a/target/linux/ramips/patches-3.10/0119-mtd-cfi-cmdset-0002-force-word-write.patch b/target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch index 73edcb470e..28274ee579 100644 --- a/target/linux/ramips/patches-3.10/0119-mtd-cfi-cmdset-0002-force-word-write.patch +++ b/target/linux/ramips/patches-3.10/0129-mtd-cfi-cmdset-0002-force-word-write.patch @@ -1,7 +1,7 @@ -From d5b094ea6d435817d295d554d652a97a5014c64f Mon Sep 17 00:00:00 2001 +From 0ffe6cdf77793536a77b5c85cf41deb27cfc7632 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Mon, 15 Jul 2013 00:39:21 +0200 -Subject: [PATCH 33/33] mtd: cfi cmdset 0002 force word write +Subject: [PATCH 129/133] mtd: cfi cmdset 0002 force word write --- drivers/mtd/chips/cfi_cmdset_0002.c | 9 +++++++-- diff --git a/target/linux/ramips/patches-3.10/0250-nand-7620.patch b/target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch index 248e82c29e..45e4632839 100644 --- a/target/linux/ramips/patches-3.10/0250-nand-7620.patch +++ b/target/linux/ramips/patches-3.10/0130-mtd-ralink-add-mt7620-nand-driver.patch @@ -1,7 +1,7 @@ -From a5fc495c8dc199ffa997d43331693a5b7ee07270 Mon Sep 17 00:00:00 2001 +From bea6f4b28443b7603e25b2404ad787a97f80fc59 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 17 Nov 2013 17:41:46 +0100 -Subject: [PATCH] ralink: add mt7620 nand driver +Subject: [PATCH 130/133] mtd: ralink: add mt7620 nand driver Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -9,8 +9,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/mtd/maps/Makefile | 2 + drivers/mtd/maps/ralink_nand.c | 2136 ++++++++++++++++++++++++++++++++++++++++ drivers/mtd/maps/ralink_nand.h | 232 +++++ - drivers/mtd/nand/Makefile | 2 +- - 5 files changed, 2375 insertions(+), 1 deletion(-) + 4 files changed, 2374 insertions(+) create mode 100644 drivers/mtd/maps/ralink_nand.c create mode 100644 drivers/mtd/maps/ralink_nand.h diff --git a/target/linux/ramips/patches-3.10/0206-MTD-add-chunked-read-io-to-m25p80.patch b/target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch index b4d64ea50c..6a4f8abf35 100644 --- a/target/linux/ramips/patches-3.10/0206-MTD-add-chunked-read-io-to-m25p80.patch +++ b/target/linux/ramips/patches-3.10/0131-mtd-add-chunked-read-io-to-m25p80.patch @@ -1,7 +1,7 @@ -From 926ae0ca5017a421709ab0478582683c29988b05 Mon Sep 17 00:00:00 2001 +From f85e6dacdb7d7a9bc37f33cf8770006ab64286f7 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Wed, 27 Nov 2013 20:58:16 +0100 -Subject: [PATCH 10/20] MTD: add chunked read io to m25p80 +Subject: [PATCH 131/133] mtd: add chunked read io to m25p80 Signed-off-by: John Crispin <blogic@openwrt.org> --- diff --git a/target/linux/ramips/patches-3.10/0200-owrt-GPIO-add-gpio_export_with_name.patch b/target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch index 6ba536a893..c6ad7f4788 100644 --- a/target/linux/ramips/patches-3.10/0200-owrt-GPIO-add-gpio_export_with_name.patch +++ b/target/linux/ramips/patches-3.10/0132-GPIO-add-gpio_export_with_name.patch @@ -1,7 +1,7 @@ -From 8f3ed1fffa35d18c2b20ebb866c71a22cc0589ff Mon Sep 17 00:00:00 2001 +From def7e226d3e5c501180bdc2fc644ff924b5a275e Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Sun, 23 Jun 2013 00:16:22 +0200 -Subject: [PATCH 29/33] owrt: GPIO: add gpio_export_with_name +Subject: [PATCH 132/133] GPIO: add gpio_export_with_name http://lists.infradead.org/pipermail/linux-arm-kernel/2012-November/133856.html diff --git a/target/linux/ramips/patches-3.10/0205-uvc-add-iPassion-iP2970-support.patch b/target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch index 5e3484e9e1..099671adf9 100644 --- a/target/linux/ramips/patches-3.10/0205-uvc-add-iPassion-iP2970-support.patch +++ b/target/linux/ramips/patches-3.10/0133-uvc-add-iPassion-iP2970-support.patch @@ -1,16 +1,15 @@ -From be8d5b55f93b8ccb3a6b5cfb1e858a59aeca2d6c Mon Sep 17 00:00:00 2001 +From 935815cd3b9690b86e70a18fb755f70becb57cc6 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> Date: Thu, 19 Sep 2013 01:50:59 +0200 -Subject: [PATCH] uvc: add iPassion iP2970 support +Subject: [PATCH 133/133] uvc: add iPassion iP2970 support Signed-off-by: John Crispin <blogic@openwrt.org> --- - drivers/media/usb/uvc/uvc_driver.c | 12 +++++++++ - drivers/media/usb/uvc/uvc_status.c | 2 ++ - drivers/media/usb/uvc/uvc_v4l2.c | 1 + - drivers/media/usb/uvc/uvc_video.c | 50 +++++++++++++++++++++++++++++++----- - drivers/media/usb/uvc/uvcvideo.h | 3 +++ - 5 files changed, 61 insertions(+), 7 deletions(-) + drivers/media/usb/uvc/uvc_driver.c | 14 ++++ + drivers/media/usb/uvc/uvc_status.c | 2 + + drivers/media/usb/uvc/uvc_video.c | 147 ++++++++++++++++++++++++++++++++++++ + drivers/media/usb/uvc/uvcvideo.h | 3 + + 4 files changed, 166 insertions(+) --- a/drivers/media/usb/uvc/uvc_driver.c +++ b/drivers/media/usb/uvc/uvc_driver.c diff --git a/target/linux/ramips/patches-3.10/0204-owrt-mtd-split-remove-padding.patch b/target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch index 9c5a728995..9c5a728995 100644 --- a/target/linux/ramips/patches-3.10/0204-owrt-mtd-split-remove-padding.patch +++ b/target/linux/ramips/patches-3.10/0134-mtd-split-remove-padding.patch diff --git a/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch b/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch new file mode 100644 index 0000000000..e358e622b2 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0200-MIPS-Fix-TLBR-use-hazards-for-R2-cores-in-the-TLB-re.patch @@ -0,0 +1,60 @@ +From f281fdccbb3e762d293e6eef7f291a33b84e0f6a Mon Sep 17 00:00:00 2001 +From: Ralf Baechle <ralf@linux-mips.org> +Date: Thu, 20 Jun 2013 14:56:17 +0200 +Subject: [PATCH 200/215] MIPS: Fix TLBR-use hazards for R2 cores in the TLB + reload handlers + +MIPS R2 documents state that an execution hazard barrier is needed +after a TLBR before reading EntryLo. + +Original patch by Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>. + +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +Patchwork: https://patchwork.linux-mips.org/patch/5526/ +(cherry picked from commit 73acc7df534ff458a81435178dab3ea037ed6d78) +--- + arch/mips/mm/tlbex.c | 26 ++++++++++++++++++++++++++ + 1 file changed, 26 insertions(+) + +--- a/arch/mips/mm/tlbex.c ++++ b/arch/mips/mm/tlbex.c +@@ -1935,6 +1935,19 @@ static void __cpuinit build_r4000_tlb_lo + uasm_i_nop(&p); + + uasm_i_tlbr(&p); ++ ++ switch (current_cpu_type()) { ++ default: ++ if (cpu_has_mips_r2) { ++ uasm_i_ehb(&p); ++ ++ case CPU_CAVIUM_OCTEON: ++ case CPU_CAVIUM_OCTEON_PLUS: ++ case CPU_CAVIUM_OCTEON2: ++ break; ++ } ++ } ++ + /* Examine entrylo 0 or 1 based on ptr. */ + if (use_bbit_insns()) { + uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8); +@@ -1989,6 +2002,19 @@ static void __cpuinit build_r4000_tlb_lo + uasm_i_nop(&p); + + uasm_i_tlbr(&p); ++ ++ switch (current_cpu_type()) { ++ default: ++ if (cpu_has_mips_r2) { ++ uasm_i_ehb(&p); ++ ++ case CPU_CAVIUM_OCTEON: ++ case CPU_CAVIUM_OCTEON_PLUS: ++ case CPU_CAVIUM_OCTEON2: ++ break; ++ } ++ } ++ + /* Examine entrylo 0 or 1 based on ptr. */ + if (use_bbit_insns()) { + uasm_i_bbit0(&p, wr.r2, ilog2(sizeof(pte_t)), 8); diff --git a/target/linux/ramips/patches-3.10/0508-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch b/target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch index c089e5aa7f..f1898ba073 100644 --- a/target/linux/ramips/patches-3.10/0508-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch +++ b/target/linux/ramips/patches-3.10/0201-MIPS-GIC-Fix-gic_set_affinity-infinite-loop.patch @@ -1,7 +1,7 @@ -From 553ddf4f3f20c28ab03f87ac8c3cde5edf714675 Mon Sep 17 00:00:00 2001 +From cde59bef2f155fc38413e470ff0e4672623cdbec Mon Sep 17 00:00:00 2001 From: Tony Wu <tung7970@gmail.com> Date: Fri, 21 Jun 2013 10:13:08 +0000 -Subject: [PATCH 022/105] MIPS: GIC: Fix gic_set_affinity infinite loop +Subject: [PATCH 201/215] MIPS: GIC: Fix gic_set_affinity infinite loop There is an infinite loop in gic_set_affinity. When irq_set_affinity gets called on gic controller, it blocks forever. diff --git a/target/linux/ramips/patches-3.10/0510-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch b/target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch index e297876ab0..e3a2cabf27 100644 --- a/target/linux/ramips/patches-3.10/0510-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch +++ b/target/linux/ramips/patches-3.10/0202-MIPS-Fix-SMP-core-calculations-when-using-MT-support.patch @@ -1,7 +1,7 @@ -From c4d621e75e865fa5374946515ad0c5e060b9c446 Mon Sep 17 00:00:00 2001 +From 46b62174f655edf6a4befae7f9871c431146b1b6 Mon Sep 17 00:00:00 2001 From: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> Date: Wed, 11 Sep 2013 14:17:47 -0500 -Subject: [PATCH 056/105] MIPS: Fix SMP core calculations when using MT +Subject: [PATCH 202/215] MIPS: Fix SMP core calculations when using MT support. The TCBIND register is only available if the core has MT support. It diff --git a/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch b/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch new file mode 100644 index 0000000000..fc853fa1bd --- /dev/null +++ b/target/linux/ramips/patches-3.10/0203-MIPS-Fix-accessing-to-per-cpu-data-when-flushing-the.patch @@ -0,0 +1,84 @@ +From 871d1be8c3ce46b8ef395b56cd0e37cede10e76a Mon Sep 17 00:00:00 2001 +From: Ralf Baechle <ralf@linux-mips.org> +Date: Tue, 17 Sep 2013 12:44:31 +0200 +Subject: [PATCH 203/215] MIPS: Fix accessing to per-cpu data when flushing + the cache + +This fixes the following issue + +BUG: using smp_processor_id() in preemptible [00000000] code: kjournald/1761 +caller is blast_dcache32+0x30/0x254 +Call Trace: +[<8047f02c>] dump_stack+0x8/0x34 +[<802e7e40>] debug_smp_processor_id+0xe0/0xf0 +[<80114d94>] blast_dcache32+0x30/0x254 +[<80118484>] r4k_dma_cache_wback_inv+0x200/0x288 +[<80110ff0>] mips_dma_map_sg+0x108/0x180 +[<80355098>] ide_dma_prepare+0xf0/0x1b8 +[<8034eaa4>] do_rw_taskfile+0x1e8/0x33c +[<8035951c>] ide_do_rw_disk+0x298/0x3e4 +[<8034a3c4>] do_ide_request+0x2e0/0x704 +[<802bb0dc>] __blk_run_queue+0x44/0x64 +[<802be000>] queue_unplugged.isra.36+0x1c/0x54 +[<802beb94>] blk_flush_plug_list+0x18c/0x24c +[<802bec6c>] blk_finish_plug+0x18/0x48 +[<8026554c>] journal_commit_transaction+0x3b8/0x151c +[<80269648>] kjournald+0xec/0x238 +[<8014ac00>] kthread+0xb8/0xc0 +[<8010268c>] ret_from_kernel_thread+0x14/0x1c + +Caches in most systems are identical - but not always, so we can't avoid +the use of smp_call_function() by just looking at the boot CPU's data, +have to fiddle with preemption instead. + +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +Cc: Markos Chandras <markos.chandras@imgtec.com> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/5835 +(cherry picked from commit ff522058bd717506b2fa066fa564657f2b86477e) +--- + arch/mips/mm/c-r4k.c | 5 +++++ + 1 file changed, 5 insertions(+) + +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -12,6 +12,7 @@ + #include <linux/highmem.h> + #include <linux/kernel.h> + #include <linux/linkage.h> ++#include <linux/preempt.h> + #include <linux/sched.h> + #include <linux/smp.h> + #include <linux/mm.h> +@@ -601,6 +602,7 @@ static void r4k_dma_cache_wback_inv(unsi + /* Catch bad driver code */ + BUG_ON(size == 0); + ++ preempt_disable(); + if (cpu_has_inclusive_pcaches) { + if (size >= scache_size) + r4k_blast_scache(); +@@ -621,6 +623,7 @@ static void r4k_dma_cache_wback_inv(unsi + R4600_HIT_CACHEOP_WAR_IMPL; + blast_dcache_range(addr, addr + size); + } ++ preempt_enable(); + + bc_wback_inv(addr, size); + __sync(); +@@ -631,6 +634,7 @@ static void r4k_dma_cache_inv(unsigned l + /* Catch bad driver code */ + BUG_ON(size == 0); + ++ preempt_disable(); + if (cpu_has_inclusive_pcaches) { + if (size >= scache_size) + r4k_blast_scache(); +@@ -655,6 +659,7 @@ static void r4k_dma_cache_inv(unsigned l + R4600_HIT_CACHEOP_WAR_IMPL; + blast_inv_dcache_range(addr, addr + size); + } ++ preempt_enable(); + + bc_inv(addr, size); + __sync(); diff --git a/target/linux/ramips/patches-3.10/0203-serial-rt5350-fix-enable-uartf-kernel-panic.patch b/target/linux/ramips/patches-3.10/0203-serial-rt5350-fix-enable-uartf-kernel-panic.patch deleted file mode 100644 index a687caabee..0000000000 --- a/target/linux/ramips/patches-3.10/0203-serial-rt5350-fix-enable-uartf-kernel-panic.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/tty/serial/8250/8250_core.c -+++ b/drivers/tty/serial/8250/8250_core.c -@@ -2499,7 +2499,7 @@ serial8250_pm(struct uart_port *port, un - static unsigned int serial8250_port_size(struct uart_8250_port *pt) - { - if (pt->port.iotype == UPIO_AU) -- return 0x1000; -+ return 0x100; - if (is_omap1_8250(pt)) - return 0x16 << pt->port.regshift; - diff --git a/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch b/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch new file mode 100644 index 0000000000..0a80ea5f79 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0204-MIPS-74K-1074K-Correct-erratum-workaround.patch @@ -0,0 +1,60 @@ +From 3da3528448850ccde412d52fb939575641ada80d Mon Sep 17 00:00:00 2001 +From: "Maciej W. Rozycki" <macro@linux-mips.org> +Date: Wed, 18 Sep 2013 19:08:15 +0100 +Subject: [PATCH 204/215] MIPS: 74K/1074K: Correct erratum workaround. + +Make sure 74K revision numbers are not applied to the 1074K. Also catch +invalid usage. + +Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org> +Cc: Steven J. Hill <Steven.Hill@imgtec.com> +Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com> +Cc: linux-mips@linux-mips.org +Patchwork: https://patchwork.linux-mips.org/patch/5857/ +Signed-off-by: Ralf Baechle <ralf@linux-mips.org> +(cherry picked from commit 9213ad77070ea75fc3a5e43e3d9e9c4146e4930a) +--- + arch/mips/mm/c-r4k.c | 26 ++++++++++++++++++-------- + 1 file changed, 18 insertions(+), 8 deletions(-) + +--- a/arch/mips/mm/c-r4k.c ++++ b/arch/mips/mm/c-r4k.c +@@ -785,20 +785,30 @@ static inline void rm7k_erratum31(void) + + static inline void alias_74k_erratum(struct cpuinfo_mips *c) + { ++ unsigned int imp = c->processor_id & 0xff00; ++ unsigned int rev = c->processor_id & PRID_REV_MASK; ++ + /* + * Early versions of the 74K do not update the cache tags on a + * vtag miss/ptag hit which can occur in the case of KSEG0/KUSEG + * aliases. In this case it is better to treat the cache as always + * having aliases. + */ +- if ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(2, 4, 0)) +- c->dcache.flags |= MIPS_CACHE_VTAG; +- if ((c->processor_id & 0xff) == PRID_REV_ENCODE_332(2, 4, 0)) +- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); +- if (((c->processor_id & 0xff00) == PRID_IMP_1074K) && +- ((c->processor_id & 0xff) <= PRID_REV_ENCODE_332(1, 1, 0))) { +- c->dcache.flags |= MIPS_CACHE_VTAG; +- write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); ++ switch (imp) { ++ case PRID_IMP_74K: ++ if (rev <= PRID_REV_ENCODE_332(2, 4, 0)) ++ c->dcache.flags |= MIPS_CACHE_VTAG; ++ if (rev == PRID_REV_ENCODE_332(2, 4, 0)) ++ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); ++ break; ++ case PRID_IMP_1074K: ++ if (rev <= PRID_REV_ENCODE_332(1, 1, 0)) { ++ c->dcache.flags |= MIPS_CACHE_VTAG; ++ write_c0_config6(read_c0_config6() | MIPS_CONF6_SYND); ++ } ++ break; ++ default: ++ BUG(); + } + } + diff --git a/target/linux/ramips/patches-3.10/0511-MIPS-GIC-Send-IPIs-using-the-GIC.patch b/target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch index 366fdb2aff..01ac8757e3 100644 --- a/target/linux/ramips/patches-3.10/0511-MIPS-GIC-Send-IPIs-using-the-GIC.patch +++ b/target/linux/ramips/patches-3.10/0205-MIPS-GIC-Send-IPIs-using-the-GIC.patch @@ -1,7 +1,7 @@ -From 43334f8438704001deb258b6e7223699bd336c77 Mon Sep 17 00:00:00 2001 +From 5a43b20db2fd18f8ea5f3a919d4bc9d9c2038c6c Mon Sep 17 00:00:00 2001 From: "Steven J. Hill" <Steven.Hill@imgtec.com> Date: Wed, 25 Sep 2013 14:58:19 -0500 -Subject: [PATCH 093/105] MIPS: GIC: Send IPIs using the GIC. +Subject: [PATCH 205/215] MIPS: GIC: Send IPIs using the GIC. If a GIC present, then use it to send IPIs between the cores. diff --git a/target/linux/ramips/patches-3.10/0502-MIPS-ralink-add-MT7621-support.patch b/target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch index 83a48f37c1..74fdf1d787 100644 --- a/target/linux/ramips/patches-3.10/0502-MIPS-ralink-add-MT7621-support.patch +++ b/target/linux/ramips/patches-3.10/0206-MIPS-ralink-add-MT7621-support.patch @@ -1,23 +1,39 @@ -From 99342a0481d49b6e1ade90fdb02f597cb75f103f Mon Sep 17 00:00:00 2001 +From 259ce690b20562aa5dfef711e72ed02a4f514ce4 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:11:09 +0100 -Subject: [PATCH 502/507] MIPS: ralink: add MT7621 support +Date: Sun, 16 Mar 2014 05:19:37 +0000 +Subject: [PATCH 206/215] MIPS: ralink: add MT7621 support Signed-off-by: John Crispin <blogic@openwrt.org> --- - arch/mips/include/asm/mach-ralink/mt7621.h | 39 +++++ + arch/mips/include/asm/gic.h | 2 + + arch/mips/include/asm/mach-ralink/mt7621.h | 39 ++++ + arch/mips/kernel/vmlinux.lds.S | 1 + arch/mips/ralink/Kconfig | 18 ++ arch/mips/ralink/Makefile | 7 +- - arch/mips/ralink/Platform | 5 + - arch/mips/ralink/irq-gic.c | 255 ++++++++++++++++++++++++++++ + arch/mips/ralink/Platform | 7 + + arch/mips/ralink/irq-gic.c | 271 ++++++++++++++++++++++++++++ arch/mips/ralink/malta-amon.c | 81 +++++++++ - arch/mips/ralink/mt7621.c | 186 ++++++++++++++++++++ - 7 files changed, 590 insertions(+), 1 deletion(-) + arch/mips/ralink/mt7621.c | 183 +++++++++++++++++++ + 9 files changed, 608 insertions(+), 1 deletion(-) create mode 100644 arch/mips/include/asm/mach-ralink/mt7621.h create mode 100644 arch/mips/ralink/irq-gic.c create mode 100644 arch/mips/ralink/malta-amon.c create mode 100644 arch/mips/ralink/mt7621.c +--- a/arch/mips/include/asm/gic.h ++++ b/arch/mips/include/asm/gic.h +@@ -19,7 +19,11 @@ + #define GIC_TRIG_EDGE 1 + #define GIC_TRIG_LEVEL 0 + ++#define GIC_NUM_INTRS 64 ++ ++#ifndef GIC_NUM_INTRS + #define GIC_NUM_INTRS (24 + NR_CPUS * 2) ++#endif + + #define MSK(n) ((1 << (n)) - 1) + #define REG32(addr) (*(volatile unsigned int *) (addr)) --- /dev/null +++ b/arch/mips/include/asm/mach-ralink/mt7621.h @@ -0,0 +1,39 @@ @@ -60,19 +76,30 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE + 8) + +#endif +--- a/arch/mips/kernel/vmlinux.lds.S ++++ b/arch/mips/kernel/vmlinux.lds.S +@@ -51,6 +51,7 @@ SECTIONS + /* read-only */ + _text = .; /* Text and read-only data */ + .text : { ++ /*. = . + 0x8000; */ + TEXT_TEXT + SCHED_TEXT + LOCK_TEXT --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig -@@ -1,5 +1,10 @@ - if RALINK +@@ -7,6 +7,11 @@ config CLKEVT_RT3352 + select CLKSRC_OF + select CLKSRC_MMIO +config IRQ_INTC + bool + default y + depends on !SOC_MT7621 + - config CLKEVT_RT3352 - bool "Systick Clockevent source" - depends on SOC_RT305X || SOC_MT7620 + choice + prompt "Ralink SoC selection" + default SOC_RT305X @@ -35,6 +40,15 @@ choice select USB_ARCH_HAS_EHCI select HW_HAS_PCI @@ -102,20 +129,22 @@ Signed-off-by: John Crispin <blogic@openwrt.org> endif --- a/arch/mips/ralink/Makefile +++ b/arch/mips/ralink/Makefile -@@ -6,7 +6,11 @@ +@@ -6,16 +6,21 @@ # Copyright (C) 2009-2011 Gabor Juhos <juhosg@openwrt.org> # Copyright (C) 2013 John Crispin <blogic@openwrt.org> -obj-y := prom.o of.o reset.o clk.o irq.o timer.o +obj-y := prom.o of.o reset.o clk.o timer.o -+ -+obj-$(CONFIG_IRQ_INTC) += irq.o -+obj-$(CONFIG_IRQ_GIC) += irq-gic.o -+obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o obj-$(CONFIG_CLKEVT_RT3352) += cevt-rt3352.o -@@ -16,6 +20,7 @@ obj-$(CONFIG_SOC_RT288X) += rt288x.o + obj-$(CONFIG_RALINK_ILL_ACC) += ill_acc.o + ++obj-$(CONFIG_IRQ_INTC) += irq.o ++obj-$(CONFIG_IRQ_GIC) += irq-gic.o ++obj-$(CONFIG_MIPS_MT_SMP) += malta-amon.o ++ + obj-$(CONFIG_SOC_RT288X) += rt288x.o obj-$(CONFIG_SOC_RT305X) += rt305x.o obj-$(CONFIG_SOC_RT3883) += rt3883.o obj-$(CONFIG_SOC_MT7620) += mt7620.o @@ -138,7 +167,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +cflags-$(CONFIG_SOC_MT7620) += -I$(srctree)/arch/mips/include/asm/mach-ralink/mt7621 --- /dev/null +++ b/arch/mips/ralink/irq-gic.c -@@ -0,0 +1,255 @@ +@@ -0,0 +1,271 @@ +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/slab.h> @@ -162,61 +191,20 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + +#include <asm/mach-ralink/mt7621.h> + -+static unsigned long _gcmp_base; ++unsigned long _gcmp_base; +static int gic_resched_int_base = 56; +static int gic_call_int_base = 60; +static struct irq_chip *irq_gic; ++static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS]; ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++static int gic_resched_int_base; ++static int gic_call_int_base; + +#define GIC_RESCHED_INT(cpu) (gic_resched_int_base+(cpu)) +#define GIC_CALL_INT(cpu) (gic_call_int_base+(cpu)) + -+static struct gic_intr_map gic_intr_map[GIC_NUM_INTRS] = { -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //0 -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { GIC_UNUSED }, -+ { 0, GIC_CPU_INT3, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //FE -+ { 0, GIC_CPU_INT4, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //PCIE0 -+ { GIC_UNUSED}, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //10 -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { GIC_UNUSED }, -+ { GIC_UNUSED }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //20 -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { GIC_UNUSED }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, //25 -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT },//30 -+ { 0, GIC_CPU_INT0, GIC_POL_POS, GIC_TRIG_LEVEL, GIC_FLAG_TRANSPARENT }, -+}; -+ -+static struct gic_intr_map ipi_intr_map[8] = { -+ { 0, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 1, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 2, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 3, GIC_CPU_INT1, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 0, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 1, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 2, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+ { 3, GIC_CPU_INT2, GIC_POL_POS, GIC_TRIG_EDGE, GIC_FLAG_IPI }, -+}; -+ -+static irqreturn_t -+ipi_resched_interrupt(int irq, void *dev_id) ++static irqreturn_t ipi_resched_interrupt(int irq, void *dev_id) +{ + scheduler_ipi(); + @@ -243,6 +231,43 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + .name = "ipi call" +}; + ++#endif ++ ++static void __init ++gic_fill_map(void) ++{ ++ int i; ++ ++ for (i = 0; i < ARRAY_SIZE(gic_intr_map); i++) { ++ gic_intr_map[i].cpunum = 0; ++ gic_intr_map[i].pin = GIC_CPU_INT0; ++ gic_intr_map[i].polarity = GIC_POL_POS; ++ gic_intr_map[i].trigtype = GIC_TRIG_LEVEL; ++ gic_intr_map[i].flags = GIC_FLAG_IPI; ++ } ++ ++#if defined(CONFIG_MIPS_MT_SMP) ++ { ++ int cpu; ++ ++ gic_call_int_base = ARRAY_SIZE(gic_intr_map) - nr_cpu_ids; ++ gic_resched_int_base = gic_call_int_base - nr_cpu_ids; ++ ++ i = gic_resched_int_base; ++ ++ for (cpu = 0; cpu < nr_cpu_ids; cpu++) { ++ gic_intr_map[i + cpu].cpunum = cpu; ++ gic_intr_map[i + cpu].pin = GIC_CPU_INT1; ++ gic_intr_map[i + cpu].trigtype = GIC_TRIG_EDGE; ++ ++ gic_intr_map[i + cpu + nr_cpu_ids].cpunum = cpu; ++ gic_intr_map[i + cpu + nr_cpu_ids].pin = GIC_CPU_INT2; ++ gic_intr_map[i + cpu + nr_cpu_ids].trigtype = GIC_TRIG_EDGE; ++ } ++ } ++#endif ++} ++ +void +gic_irq_ack(struct irq_data *d) +{ @@ -267,12 +292,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +} + +static void -+vi_gic_irqdispatch(void) ++gic_irqdispatch(void) +{ -+ int irq = gic_get_int(); ++ unsigned int irq = gic_get_int(); + -+ if (irq >= 0) ++ if (likely(irq < GIC_NUM_INTRS)) + do_IRQ(MIPS_GIC_IRQ_BASE + irq); ++ else { ++ pr_err("Spurious GIC Interrupt!\n"); ++ spurious_interrupt(); ++ } ++ +} + +static void @@ -281,6 +311,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + do_IRQ(cp0_compare_irq); +} + ++#if defined(CONFIG_MIPS_MT_SMP) +unsigned int +plat_ipi_call_int_xlate(unsigned int cpu) +{ @@ -292,18 +323,23 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +{ + return GIC_RESCHED_INT(cpu); +} ++#endif + +asmlinkage void +plat_irq_dispatch(void) +{ + unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM; + -+ if (pending & CAUSEF_IP7) -+ do_IRQ(cp0_compare_irq); -+ else if (pending & (CAUSEF_IP4 | CAUSEF_IP3)) -+ vi_gic_irqdispatch(); -+ else ++ if (unlikely(!pending)) { ++ pr_err("Spurious CP0 Interrupt!\n"); + spurious_interrupt(); ++ } else { ++ if (pending & CAUSEF_IP7) ++ do_IRQ(cp0_compare_irq); ++ ++ if (pending & (CAUSEF_IP4 | CAUSEF_IP3 | CAUSEF_IP2)) ++ gic_irqdispatch(); ++ } +} + +unsigned int __cpuinit @@ -315,7 +351,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +static int +gic_map(struct irq_domain *d, unsigned int irq, irq_hw_number_t hw) +{ -+ irq_set_chip_and_handler(irq, irq_gic, handle_percpu_irq); ++ irq_set_chip_and_handler(irq, irq_gic, ++#if defined(CONFIG_MIPS_MT_SMP) ++ (hw >= gic_resched_int_base) ? ++ handle_percpu_irq : ++#endif ++ handle_level_irq); + + return 0; +} @@ -356,12 +397,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + GCMPGCB(GICBA) = gic.start | GCMP_GCB_GICBA_EN_MSK; + gic_present = 1; + if (cpu_has_vint) { -+ set_vi_handler(3, vi_gic_irqdispatch); -+ set_vi_handler(4, vi_gic_irqdispatch); ++ set_vi_handler(2, gic_irqdispatch); ++ set_vi_handler(3, gic_irqdispatch); ++ set_vi_handler(4, gic_irqdispatch); + set_vi_handler(7, vi_timer_irqdispatch); + } + -+ memcpy(&gic_intr_map[gic_resched_int_base], ipi_intr_map, sizeof(ipi_intr_map)); ++ gic_fill_map(); ++ + gic_init(gic.start, resource_size(&gic), gic_intr_map, + ARRAY_SIZE(gic_intr_map), MIPS_GIC_IRQ_BASE); + @@ -373,13 +416,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + if (!domain) + panic("Failed to add irqdomain"); + -+ for (i = 0; i < NR_CPUS; i++) { ++#if defined(CONFIG_MIPS_MT_SMP) ++ for (i = 0; i < nr_cpu_ids; i++) { + setup_irq(MIPS_GIC_IRQ_BASE + GIC_RESCHED_INT(i), &irq_resched); + setup_irq(MIPS_GIC_IRQ_BASE + GIC_CALL_INT(i), &irq_call); + } ++#endif + -+ change_c0_status(ST0_IM, STATUSF_IP3 | STATUSF_IP4 | STATUSF_IP6 | -+ STATUSF_IP7); ++ change_c0_status(ST0_IM, STATUSF_IP7 | STATUSF_IP4 | STATUSF_IP3 | ++ STATUSF_IP2); + return 0; +} + @@ -480,7 +525,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +} --- /dev/null +++ b/arch/mips/ralink/mt7621.c -@@ -0,0 +1,186 @@ +@@ -0,0 +1,183 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published @@ -499,6 +544,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#include <asm/gcmpregs.h> + +#include <asm/mipsregs.h> ++#include <asm/smp-ops.h> +#include <asm/mach-ralink/ralink_regs.h> +#include <asm/mach-ralink/mt7621.h> + @@ -597,22 +643,17 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + cpu_fdiv = ((clk_sts >> 8) & 0x1F); + cpu_ffrac = (clk_sts & 0x1F); + cpu_clk = (500 * cpu_ffrac / cpu_fdiv) * 1000 * 1000; -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + break; + + case 1: + fbdiv = ((rt_sysc_r32(0x648) >> 4) & 0x7F) + 1; + syscfg = rt_sysc_r32(SYSC_REG_SYSCFG); + xtal_mode = (syscfg >> 6) & 0x7; -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + if(xtal_mode >= 6) { //25Mhz Xtal -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + cpu_clk = 25 * fbdiv * 1000 * 1000; + } else if(xtal_mode >=3) { //40Mhz Xtal -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + cpu_clk = 40 * fbdiv * 1000 * 1000; + } else { // 20Mhz Xtal -+ printk("%s:%s[%d]\n", __FILE__, __func__, __LINE__); + cpu_clk = 20 * fbdiv * 1000 * 1000; + } + break; @@ -621,6 +662,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + ralink_clk_add("cpu", cpu_clk); + ralink_clk_add("1e000b00.spi", 50000000); + ralink_clk_add("1e000c00.uartlite", 50000000); ++ ralink_clk_add("1e000d00.uart", 50000000); +} + +void __init ralink_of_remap(void) @@ -667,3 +709,15 @@ Signed-off-by: John Crispin <blogic@openwrt.org> + if (register_cmp_smp_ops()) + panic("failed to register_vsmp_smp_ops()"); +} +--- /dev/null ++++ b/arch/mips/include/asm/mach-ralink/irq.h +@@ -0,0 +1,9 @@ ++#ifndef __ASM_MACH_RALINK_IRQ_H ++#define __ASM_MACH_RALINK_IRQ_H ++ ++#define GIC_NUM_INTRS 64 ++#define NR_IRQS 256 ++ ++#include_next <irq.h> ++ ++#endif diff --git a/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch b/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch new file mode 100644 index 0000000000..1dc97266b9 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0207-MIPS-ralink-add-MT7621-defconfig.patch @@ -0,0 +1,211 @@ +From 29b1c70ab171609fee58ef6642086d571c0ba0c2 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 27 Jan 2014 13:12:41 +0000 +Subject: [PATCH 207/215] MIPS: ralink: add MT7621 defconfig + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/configs/mt7621_defconfig | 197 ++++++++++++++++++++++++++++++++++++ + 1 file changed, 197 insertions(+) + create mode 100644 arch/mips/configs/mt7621_defconfig + +--- /dev/null ++++ b/arch/mips/configs/mt7621_defconfig +@@ -0,0 +1,197 @@ ++# CONFIG_LOCALVERSION_AUTO is not set ++CONFIG_SYSVIPC=y ++CONFIG_HIGH_RES_TIMERS=y ++CONFIG_RCU_FANOUT=32 ++CONFIG_UIDGID_STRICT_TYPE_CHECKS=y ++CONFIG_BLK_DEV_INITRD=y ++CONFIG_INITRAMFS_SOURCE="/openwrt/trunk/build_dir/target-mipsel_24kec+dsp_uClibc-0.9.33.2/root-ramips /openwrt/trunk/target/linux/generic/image/initramfs-base-files.txt" ++CONFIG_INITRAMFS_ROOT_UID=1000 ++CONFIG_INITRAMFS_ROOT_GID=1000 ++# CONFIG_RD_GZIP is not set ++CONFIG_CC_OPTIMIZE_FOR_SIZE=y ++# CONFIG_AIO is not set ++CONFIG_EMBEDDED=y ++# CONFIG_VM_EVENT_COUNTERS is not set ++# CONFIG_SLUB_DEBUG is not set ++# CONFIG_COMPAT_BRK is not set ++CONFIG_MODULES=y ++CONFIG_MODULE_UNLOAD=y ++# CONFIG_BLK_DEV_BSG is not set ++CONFIG_PARTITION_ADVANCED=y ++# CONFIG_IOSCHED_CFQ is not set ++CONFIG_SMP=y ++CONFIG_NR_CPUS=4 ++CONFIG_SCHED_SMT=y ++# CONFIG_COMPACTION is not set ++# CONFIG_CROSS_MEMORY_ATTACH is not set ++# CONFIG_SECCOMP is not set ++CONFIG_HZ_100=y ++CONFIG_CMDLINE_BOOL=y ++CONFIG_CMDLINE="rootfstype=squashfs,jffs2" ++# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set ++CONFIG_NET=y ++CONFIG_PACKET=y ++CONFIG_UNIX=y ++CONFIG_INET=y ++CONFIG_IP_MULTICAST=y ++CONFIG_IP_ADVANCED_ROUTER=y ++CONFIG_IP_MULTIPLE_TABLES=y ++CONFIG_IP_ROUTE_MULTIPATH=y ++CONFIG_IP_ROUTE_VERBOSE=y ++CONFIG_IP_MROUTE=y ++CONFIG_IP_MROUTE_MULTIPLE_TABLES=y ++CONFIG_ARPD=y ++CONFIG_SYN_COOKIES=y ++# CONFIG_INET_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET_XFRM_MODE_BEET is not set ++# CONFIG_INET_LRO is not set ++# CONFIG_INET_DIAG is not set ++CONFIG_TCP_CONG_ADVANCED=y ++# CONFIG_TCP_CONG_BIC is not set ++# CONFIG_TCP_CONG_WESTWOOD is not set ++# CONFIG_TCP_CONG_HTCP is not set ++CONFIG_IPV6_PRIVACY=y ++# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set ++# CONFIG_INET6_XFRM_MODE_TUNNEL is not set ++# CONFIG_INET6_XFRM_MODE_BEET is not set ++# CONFIG_IPV6_SIT is not set ++CONFIG_IPV6_MULTIPLE_TABLES=y ++CONFIG_IPV6_SUBTREES=y ++CONFIG_IPV6_MROUTE=y ++CONFIG_NETFILTER=y ++# CONFIG_BRIDGE_NETFILTER is not set ++CONFIG_NF_CONNTRACK=m ++CONFIG_NF_CONNTRACK_FTP=m ++CONFIG_NF_CONNTRACK_IRC=m ++CONFIG_NETFILTER_XT_MARK=m ++CONFIG_NETFILTER_XT_TARGET_LOG=m ++CONFIG_NETFILTER_XT_TARGET_NOTRACK=m ++CONFIG_NETFILTER_XT_TARGET_TCPMSS=m ++CONFIG_NETFILTER_XT_MATCH_COMMENT=m ++CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m ++CONFIG_NETFILTER_XT_MATCH_LIMIT=m ++CONFIG_NETFILTER_XT_MATCH_MAC=m ++CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m ++CONFIG_NETFILTER_XT_MATCH_STATE=m ++CONFIG_NETFILTER_XT_MATCH_TIME=m ++CONFIG_NF_CONNTRACK_IPV4=m ++# CONFIG_NF_CONNTRACK_PROC_COMPAT is not set ++CONFIG_IP_NF_IPTABLES=m ++CONFIG_IP_NF_FILTER=m ++CONFIG_IP_NF_TARGET_REJECT=m ++CONFIG_NF_NAT_IPV4=m ++CONFIG_IP_NF_TARGET_MASQUERADE=m ++CONFIG_IP_NF_TARGET_REDIRECT=m ++CONFIG_IP_NF_MANGLE=m ++CONFIG_IP_NF_RAW=m ++CONFIG_NF_CONNTRACK_IPV6=m ++CONFIG_IP6_NF_IPTABLES=m ++CONFIG_IP6_NF_MATCH_AH=m ++CONFIG_IP6_NF_MATCH_EUI64=m ++CONFIG_IP6_NF_MATCH_FRAG=m ++CONFIG_IP6_NF_MATCH_OPTS=m ++CONFIG_IP6_NF_MATCH_IPV6HEADER=m ++CONFIG_IP6_NF_MATCH_MH=m ++CONFIG_IP6_NF_MATCH_RT=m ++CONFIG_IP6_NF_FILTER=m ++CONFIG_IP6_NF_TARGET_REJECT=m ++CONFIG_IP6_NF_MANGLE=m ++CONFIG_IP6_NF_RAW=m ++CONFIG_BRIDGE=m ++# CONFIG_BRIDGE_IGMP_SNOOPING is not set ++CONFIG_VLAN_8021Q=y ++CONFIG_NET_SCHED=y ++CONFIG_NET_SCH_FQ_CODEL=y ++CONFIG_HAMRADIO=y ++CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" ++# CONFIG_FIRMWARE_IN_KERNEL is not set ++CONFIG_MTD=y ++CONFIG_MTD_CMDLINE_PARTS=y ++CONFIG_MTD_BLOCK=y ++CONFIG_MTD_CFI=y ++CONFIG_MTD_CFI_AMDSTD=y ++CONFIG_MTD_COMPLEX_MAPPINGS=y ++CONFIG_MTD_PHYSMAP=y ++CONFIG_MTD_M25P80=y ++CONFIG_EEPROM_93CX6=m ++CONFIG_SCSI=y ++CONFIG_BLK_DEV_SD=y ++CONFIG_NETDEVICES=y ++# CONFIG_NET_PACKET_ENGINE is not set ++# CONFIG_NET_VENDOR_WIZNET is not set ++CONFIG_PHYLIB=y ++CONFIG_SWCONFIG=y ++CONFIG_PPP=m ++CONFIG_PPP_FILTER=y ++CONFIG_PPP_MULTILINK=y ++CONFIG_PPPOE=m ++CONFIG_PPP_ASYNC=m ++CONFIG_ISDN=y ++# CONFIG_INPUT is not set ++# CONFIG_SERIO is not set ++# CONFIG_VT is not set ++# CONFIG_LEGACY_PTYS is not set ++# CONFIG_DEVKMEM is not set ++CONFIG_SERIAL_8250=y ++# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set ++CONFIG_SERIAL_8250_CONSOLE=y ++# CONFIG_SERIAL_8250_PCI is not set ++CONFIG_SERIAL_8250_RUNTIME_UARTS=2 ++CONFIG_SPI=y ++CONFIG_GPIOLIB=y ++CONFIG_GPIO_SYSFS=y ++# CONFIG_HWMON is not set ++CONFIG_WATCHDOG=y ++CONFIG_WATCHDOG_CORE=y ++# CONFIG_VGA_ARB is not set ++CONFIG_USB=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_PLATFORM=y ++CONFIG_USB_MT7621_XHCI_PLATFORM=y ++CONFIG_USB_STORAGE=y ++CONFIG_USB_PHY=y ++CONFIG_NEW_LEDS=y ++CONFIG_LEDS_CLASS=y ++CONFIG_LEDS_GPIO=m ++CONFIG_LEDS_TRIGGERS=y ++CONFIG_LEDS_TRIGGER_TIMER=y ++CONFIG_LEDS_TRIGGER_DEFAULT_ON=y ++CONFIG_STAGING=y ++CONFIG_USB_DWC2=m ++# CONFIG_IOMMU_SUPPORT is not set ++CONFIG_RESET_CONTROLLER=y ++# CONFIG_FIRMWARE_MEMMAP is not set ++# CONFIG_DNOTIFY is not set ++# CONFIG_PROC_PAGE_MONITOR is not set ++CONFIG_TMPFS=y ++CONFIG_TMPFS_XATTR=y ++CONFIG_JFFS2_FS=y ++CONFIG_JFFS2_SUMMARY=y ++CONFIG_JFFS2_FS_XATTR=y ++# CONFIG_JFFS2_FS_POSIX_ACL is not set ++# CONFIG_JFFS2_FS_SECURITY is not set ++CONFIG_JFFS2_COMPRESSION_OPTIONS=y ++# CONFIG_JFFS2_ZLIB is not set ++CONFIG_SQUASHFS=y ++# CONFIG_SQUASHFS_ZLIB is not set ++CONFIG_SQUASHFS_XZ=y ++CONFIG_PRINTK_TIME=y ++# CONFIG_ENABLE_MUST_CHECK is not set ++CONFIG_FRAME_WARN=1024 ++CONFIG_MAGIC_SYSRQ=y ++CONFIG_STRIP_ASM_SYMS=y ++# CONFIG_UNUSED_SYMBOLS is not set ++CONFIG_DEBUG_FS=y ++# CONFIG_SCHED_DEBUG is not set ++CONFIG_DEBUG_INFO=y ++CONFIG_DEBUG_INFO_REDUCED=y ++CONFIG_RCU_CPU_STALL_TIMEOUT=60 ++# CONFIG_FTRACE is not set ++CONFIG_CRYPTO_ARC4=m ++# CONFIG_CRYPTO_ANSI_CPRNG is not set ++# CONFIG_VIRTUALIZATION is not set ++CONFIG_CRC_ITU_T=m ++CONFIG_CRC32_SARWATE=y ++# CONFIG_XZ_DEC_X86 is not set ++CONFIG_AVERAGE=y diff --git a/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch b/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch new file mode 100644 index 0000000000..880252856b --- /dev/null +++ b/target/linux/ramips/patches-3.10/0208-MIPS-ralink-add-MT7621-dts-file.patch @@ -0,0 +1,300 @@ +From dd4f939bb7c30f9256a35d31de673241ead350ab Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Fri, 24 Jan 2014 17:01:22 +0100 +Subject: [PATCH 208/215] MIPS: ralink: add MT7621 dts file + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + arch/mips/ralink/dts/Makefile | 1 + + arch/mips/ralink/dts/mt7621.dtsi | 257 ++++++++++++++++++++++++++++++++++ + arch/mips/ralink/dts/mt7621_eval.dts | 16 +++ + 3 files changed, 274 insertions(+) + create mode 100644 arch/mips/ralink/dts/mt7621.dtsi + create mode 100644 arch/mips/ralink/dts/mt7621_eval.dts + +--- a/arch/mips/ralink/dts/Makefile ++++ b/arch/mips/ralink/dts/Makefile +@@ -2,3 +2,4 @@ obj-$(CONFIG_DTB_RT2880_EVAL) := rt2880_ + obj-$(CONFIG_DTB_RT305X_EVAL) := rt3052_eval.dtb.o + obj-$(CONFIG_DTB_RT3883_EVAL) := rt3883_eval.dtb.o + obj-$(CONFIG_DTB_MT7620A_EVAL) := mt7620a_eval.dtb.o ++obj-$(CONFIG_DTB_MT7621_EVAL) := mt7621_eval.dtb.o +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7621.dtsi +@@ -0,0 +1,257 @@ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "ralink,mtk7620a-soc"; ++ ++ cpus { ++ cpu@0 { ++ compatible = "mips,mips24KEc"; ++ }; ++ }; ++ ++ cpuintc: cpuintc@0 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "mti,cpu-interrupt-controller"; ++ }; ++ ++ palmbus@1E000000 { ++ compatible = "palmbus"; ++ reg = <0x1E000000 0x100000>; ++ ranges = <0x0 0x1E000000 0x0FFFFF>; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ sysc@0 { ++ compatible = "mtk,mt7621-sysc"; ++ reg = <0x0 0x100>; ++ }; ++ ++ wdt@100 { ++ compatible = "mtk,mt7621-wdt"; ++ reg = <0x100 0x100>; ++ }; ++ ++ gpio@600 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ compatible = "mtk,mt7621-gpio"; ++ reg = <0x600 0x100>; ++ ++ gpio0: bank@0 { ++ reg = <0>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio1: bank@1 { ++ reg = <1>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ ++ gpio2: bank@2 { ++ reg = <2>; ++ compatible = "mtk,mt7621-gpio-bank"; ++ gpio-controller; ++ #gpio-cells = <2>; ++ }; ++ }; ++ ++ memc@5000 { ++ compatible = "mtk,mt7621-memc"; ++ reg = <0x300 0x100>; ++ }; ++ ++ uartlite@c00 { ++ compatible = "ns16550a"; ++ reg = <0xc00 0x100>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <26>; ++ ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ no-loopback-test; ++ }; ++ ++ uart@d00 { ++ compatible = "ns16550a"; ++ reg = <0xd00 0x100>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <27>; ++ ++ fifo-size = <16>; ++ reg-shift = <2>; ++ reg-io-width = <4>; ++ no-loopback-test; ++ }; ++ ++ spi@b00 { ++ status = "okay"; ++ ++ compatible = "ralink,mt7621-spi"; ++ reg = <0xb00 0x100>; ++ ++ resets = <&rstctrl 18>; ++ reset-names = "spi"; ++ ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++/* pinctrl-names = "default"; ++ pinctrl-0 = <&spi_pins>;*/ ++ ++ m25p80@0 { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ compatible = "en25q64"; ++ reg = <0 0>; ++ linux,modalias = "m25p80", "en25q64"; ++ spi-max-frequency = <10000000>; ++ ++ m25p,chunked-io; ++ ++ partition@0 { ++ label = "u-boot"; ++ reg = <0x0 0x30000>; ++ read-only; ++ }; ++ ++ partition@30000 { ++ label = "u-boot-env"; ++ reg = <0x30000 0x10000>; ++ read-only; ++ }; ++ ++ factory: partition@40000 { ++ label = "factory"; ++ reg = <0x40000 0x10000>; ++ read-only; ++ }; ++ ++ partition@50000 { ++ label = "firmware"; ++ reg = <0x50000 0x7a0000>; ++ }; ++ ++ partition@7f0000 { ++ label = "test"; ++ reg = <0x7f0000 0x10000>; ++ }; ++ }; ++ }; ++ }; ++ ++ rstctrl: rstctrl { ++ compatible = "ralink,rt2880-reset"; ++ #reset-cells = <1>; ++ }; ++ ++ sdhci@1E130000 { ++ compatible = "ralink,mt7620a-sdhci"; ++ reg = <0x1E130000 4000>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <20>; ++ }; ++ ++ xhci@1E1C0000 { ++ compatible = "xhci-platform"; ++ reg = <0x1E1C0000 4000>; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <22>; ++ }; ++ ++ gic: gic@1fbc0000 { ++ #address-cells = <0>; ++ #interrupt-cells = <1>; ++ interrupt-controller; ++ compatible = "ralink,mt7621-gic"; ++ reg = < 0x1fbc0000 0x80 /* gic */ ++ 0x1fbf0000 0x8000 /* cpc */ ++ 0x1fbf8000 0x8000 /* gpmc */ ++ >; ++ }; ++ ++ nand@1e003000 { ++ compatible = "mtk,mt7621-nand"; ++ bank-width = <2>; ++ reg = <0x1e003000 0x800 ++ 0x1e003800 0x800>; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "uboot"; ++ reg = <0x00000 0x80000>; /* 64 KB */ ++ }; ++ partition@80000 { ++ label = "uboot_env"; ++ reg = <0x80000 0x80000>; /* 64 KB */ ++ }; ++ partition@100000 { ++ label = "factory"; ++ reg = <0x100000 0x40000>; ++ }; ++ partition@140000 { ++ label = "rootfs"; ++ reg = <0x140000 0xec0000>; ++ }; ++ }; ++ ++ ethernet@1e100000 { ++ compatible = "ralink,mt7621-eth"; ++ reg = <0x1e100000 10000>; ++ ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ ralink,port-map = "llllw"; ++ ++ interrupt-parent = <&gic>; ++ interrupts = <3>; ++ ++/* resets = <&rstctrl 21 &rstctrl 23>; ++ reset-names = "fe", "esw"; ++ ++ port@4 { ++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; ++ reg = <4>; ++ ++ status = "disabled"; ++ }; ++ ++ port@5 { ++ compatible = "ralink,mt7620a-gsw-port", "ralink,eth-port"; ++ reg = <5>; ++ ++ status = "disabled"; ++ }; ++*/ ++ mdio-bus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ phy1f: ethernet-phy@1f { ++ reg = <0x1f>; ++ phy-mode = "rgmii"; ++ ++/* interrupt-parent = <&gic>; ++ interrupts = <23>; ++*/ }; ++ }; ++ }; ++ ++ gsw@1e110000 { ++ compatible = "ralink,mt7620a-gsw"; ++ reg = <0x1e110000 8000>; ++ }; ++}; +--- /dev/null ++++ b/arch/mips/ralink/dts/mt7621_eval.dts +@@ -0,0 +1,16 @@ ++/dts-v1/; ++ ++/include/ "mt7621.dtsi" ++ ++/ { ++ compatible = "ralink,mt7621-eval-board", "ralink,mt7621-soc"; ++ model = "Ralink MT7621 evaluation board"; ++ ++ memory@0 { ++ reg = <0x0 0x2000000>; ++ }; ++ ++ chosen { ++ bootargs = "console=ttyS0,57600"; ++ }; ++}; diff --git a/target/linux/ramips/patches-3.10/0503-MIPS-ralink-add-MT7621-early_printk-support.patch b/target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch index 0da9480804..d518ee6800 100644 --- a/target/linux/ramips/patches-3.10/0503-MIPS-ralink-add-MT7621-early_printk-support.patch +++ b/target/linux/ramips/patches-3.10/0209-MIPS-ralink-add-MT7621-early_printk-support.patch @@ -1,7 +1,7 @@ -From 643e61b22155cd95ae6e18e57da50acd120da091 Mon Sep 17 00:00:00 2001 +From a9d4390c6d27e737887388ccbb48f3767f9f89ef Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:11:33 +0100 -Subject: [PATCH 503/507] MIPS: ralink: add MT7621 early_printk support +Date: Fri, 24 Jan 2014 17:01:17 +0100 +Subject: [PATCH 209/215] MIPS: ralink: add MT7621 early_printk support Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -19,19 +19,19 @@ Signed-off-by: John Crispin <blogic@openwrt.org> #else #define EARLY_UART_BASE 0x10000c00 #endif -@@ -40,9 +42,13 @@ static inline u32 uart_r32(unsigned reg) +@@ -40,9 +42,15 @@ static inline u32 uart_r32(unsigned reg) void prom_putchar(unsigned char ch) { -- while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) +#ifdef CONFIG_SOC_MT7621 + uart_w32(ch, UART_TX); + while ((uart_r32(0x14) & UART_LSR_THRE) == 0) - ; -- uart_w32(ch, UART_REG_TX); ++ ; +#else while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) ; -+ uart_w32(ch, UART_REG_TX); + uart_w32(ch, UART_REG_TX); + while ((uart_r32(UART_REG_LSR) & UART_LSR_THRE) == 0) + ; +#endif } diff --git a/target/linux/ramips/patches-3.10/0504-MIPS-ralink-add-pcie-driver.patch b/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch index 3ca3c9dbaf..8dae5b3e59 100644 --- a/target/linux/ramips/patches-3.10/0504-MIPS-ralink-add-pcie-driver.patch +++ b/target/linux/ramips/patches-3.10/0210-MIPS-ralink-add-MT7621-pcie-driver.patch @@ -1,7 +1,7 @@ -From 50216a5b7b3cc269043e7123db4bea262e35364e Mon Sep 17 00:00:00 2001 +From 6541090161342ef11cf319a7471aeb6769e20c2c Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:13:40 +0100 -Subject: [PATCH 504/507] MIPS: ralink: add pcie driver +Date: Sun, 16 Mar 2014 05:22:39 +0000 +Subject: [PATCH 210/215] MIPS: ralink: add MT7621 pcie driver Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -12,14 +12,14 @@ Signed-off-by: John Crispin <blogic@openwrt.org> --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile -@@ -44,6 +44,7 @@ obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o +@@ -42,6 +42,7 @@ obj-$(CONFIG_SNI_RM) += fixup-sni.o ops + obj-$(CONFIG_LANTIQ) += fixup-lantiq.o + obj-$(CONFIG_PCI_LANTIQ) += pci-lantiq.o ops-lantiq.o obj-$(CONFIG_SOC_MT7620) += pci-mt7620a.o ++obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o obj-$(CONFIG_SOC_RT2880) += pci-rt2880.o obj-$(CONFIG_SOC_RT3883) += pci-rt3883.o -+obj-$(CONFIG_SOC_MT7621) += pci-mt7621.o obj-$(CONFIG_TANBAC_TB0219) += fixup-tb0219.o - obj-$(CONFIG_TANBAC_TB0226) += fixup-tb0226.o - obj-$(CONFIG_TANBAC_TB0287) += fixup-tb0287.o --- /dev/null +++ b/arch/mips/pci/pci-mt7621.c @@ -0,0 +1,797 @@ diff --git a/target/linux/ramips/patches-3.10/0505-watchdog-add-MT7621-support.patch b/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch index b1d2da7766..dde4a35aef 100644 --- a/target/linux/ramips/patches-3.10/0505-watchdog-add-MT7621-support.patch +++ b/target/linux/ramips/patches-3.10/0211-watchdog-add-MT7621-support.patch @@ -1,7 +1,7 @@ -From eb50d97682d78af68388d24956a74de4ab751cf7 Mon Sep 17 00:00:00 2001 +From 158f2deb6349046ee4406578a5d3146ce9870cb3 Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:18:36 +0100 -Subject: [PATCH 505/507] watchdog: add MT7621 support +Date: Sun, 16 Mar 2014 05:24:42 +0000 +Subject: [PATCH 211/215] watchdog: add MT7621 support Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -11,27 +11,29 @@ Signed-off-by: John Crispin <blogic@openwrt.org> 3 files changed, 193 insertions(+) create mode 100644 drivers/watchdog/mt7621_wdt.c ---- a/drivers/watchdog/Kconfig -+++ b/drivers/watchdog/Kconfig -@@ -1116,7 +1116,14 @@ config LANTIQ_WDT - config RALINK_WDT - tristate "Ralink SoC watchdog" - select WATCHDOG_CORE -- depends on RALINK -+ depends on RALINK && !SOC_MT7621 -+ help -+ Hardware driver for the Ralink SoC Watchdog Timer. -+ +Index: linux-3.10.32/drivers/watchdog/Kconfig +=================================================================== +--- linux-3.10.32.orig/drivers/watchdog/Kconfig 2014-03-18 11:00:30.629639835 +0000 ++++ linux-3.10.32/drivers/watchdog/Kconfig 2014-03-18 11:02:35.141634769 +0000 +@@ -1120,6 +1120,13 @@ + help + Hardware driver for the Ralink SoC Watchdog Timer. + +config MT7621_WDT + tristate "Mediatek SoC watchdog" + select WATCHDOG_CORE -+ depends on RALINK && SOC_MT7621 - help - Hardware driver for the Ralink SoC Watchdog Timer. ++ depends on SOC_MT7621 ++ help ++ Hardware driver for the Ralink SoC Watchdog Timer. ++ + # PARISC Architecture ---- a/drivers/watchdog/Makefile -+++ b/drivers/watchdog/Makefile -@@ -136,6 +136,7 @@ obj-$(CONFIG_OCTEON_WDT) += octeon-wdt.o + # POWERPC Architecture +Index: linux-3.10.32/drivers/watchdog/Makefile +=================================================================== +--- linux-3.10.32.orig/drivers/watchdog/Makefile 2014-03-18 11:00:30.629639835 +0000 ++++ linux-3.10.32/drivers/watchdog/Makefile 2014-03-18 11:00:31.317639807 +0000 +@@ -136,6 +136,7 @@ octeon-wdt-y := octeon-wdt-main.o octeon-wdt-nmi.o obj-$(CONFIG_LANTIQ_WDT) += lantiq_wdt.o obj-$(CONFIG_RALINK_WDT) += rt2880_wdt.o @@ -39,8 +41,10 @@ Signed-off-by: John Crispin <blogic@openwrt.org> # PARISC Architecture ---- /dev/null -+++ b/drivers/watchdog/mt7621_wdt.c +Index: linux-3.10.32/drivers/watchdog/mt7621_wdt.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.32/drivers/watchdog/mt7621_wdt.c 2014-03-18 11:00:31.317639807 +0000 @@ -0,0 +1,185 @@ +/* + * Ralink RT288x/RT3xxx/MT76xx built-in hardware watchdog timer diff --git a/target/linux/ramips/patches-3.10/0506-GPIO-ralink-add-mt7621-gpio-controller.patch b/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch index d783d261ab..5a554fd349 100644 --- a/target/linux/ramips/patches-3.10/0506-GPIO-ralink-add-mt7621-gpio-controller.patch +++ b/target/linux/ramips/patches-3.10/0212-GPIO-ralink-add-mt7621-gpio-controller.patch @@ -1,41 +1,63 @@ -From e19957560170d63c6a5f0b1d7ba63695e4d1f033 Mon Sep 17 00:00:00 2001 +From 2a9b5a9fc1a0707b95dbe61dd1c30b9337cb457d Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:14:28 +0100 -Subject: [PATCH 506/507] GPIO: ralink: add mt7621 gpio controller +Date: Sun, 16 Mar 2014 05:26:34 +0000 +Subject: [PATCH 212/215] GPIO: ralink: add mt7621 gpio controller Signed-off-by: John Crispin <blogic@openwrt.org> --- - arch/mips/Kconfig | 1 + + arch/mips/Kconfig | 5 +- drivers/gpio/Kconfig | 6 ++ drivers/gpio/Makefile | 1 + drivers/gpio/gpio-mt7621.c | 183 ++++++++++++++++++++++++++++++++++++++++++++ - 4 files changed, 191 insertions(+) + 4 files changed, 194 insertions(+), 1 deletion(-) create mode 100644 drivers/gpio/gpio-mt7621.c ---- a/drivers/gpio/Kconfig -+++ b/drivers/gpio/Kconfig -@@ -710,6 +710,12 @@ config GPIO_MSIC +Index: linux-3.10.32/arch/mips/Kconfig +=================================================================== +--- linux-3.10.32.orig/arch/mips/Kconfig 2014-03-18 11:00:30.945639822 +0000 ++++ linux-3.10.32/arch/mips/Kconfig 2014-03-18 11:00:31.325639806 +0000 +@@ -448,7 +448,10 @@ + select ARCH_REQUIRE_GPIOLIB + select PINCTRL + select PINCTRL_RT2880 +- ++ select ARCH_HAS_RESET_CONTROLLER ++ select RESET_CONTROLLER ++ select ARCH_REQUIRE_GPIOLIB ++ + config SGI_IP22 + bool "SGI IP22 (Indy/Indigo2)" + select FW_ARC +Index: linux-3.10.32/drivers/gpio/Kconfig +=================================================================== +--- linux-3.10.32.orig/drivers/gpio/Kconfig 2014-03-18 11:00:30.653639834 +0000 ++++ linux-3.10.32/drivers/gpio/Kconfig 2014-03-18 11:02:01.901636126 +0000 +@@ -710,6 +710,12 @@ Enable support for GPIO on intel MSIC controllers found in intel MID devices +config GPIO_MT7621 + bool "Mediatek GPIO Support" -+ depends on RALINK && SOC_MT7621 ++ depends on SOC_MT7621 + help + Say yes here to support the Mediatek SoC GPIO device + comment "USB GPIO expanders:" config GPIO_VIPERBOARD ---- a/drivers/gpio/Makefile -+++ b/drivers/gpio/Makefile -@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM831X) += gpio-wm831x +Index: linux-3.10.32/drivers/gpio/Makefile +=================================================================== +--- linux-3.10.32.orig/drivers/gpio/Makefile 2014-03-18 11:00:30.653639834 +0000 ++++ linux-3.10.32/drivers/gpio/Makefile 2014-03-18 11:00:31.325639806 +0000 +@@ -88,3 +88,4 @@ obj-$(CONFIG_GPIO_WM8350) += gpio-wm8350.o obj-$(CONFIG_GPIO_WM8994) += gpio-wm8994.o obj-$(CONFIG_GPIO_XILINX) += gpio-xilinx.o +obj-$(CONFIG_GPIO_MT7621) += gpio-mt7621.o ---- /dev/null -+++ b/drivers/gpio/gpio-mt7621.c +Index: linux-3.10.32/drivers/gpio/gpio-mt7621.c +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-3.10.32/drivers/gpio/gpio-mt7621.c 2014-03-18 11:00:31.325639806 +0000 @@ -0,0 +1,183 @@ +/* + * This program is free software; you can redistribute it and/or modify it diff --git a/target/linux/ramips/patches-3.10/0507-MTD-add-mt7621-nand-support.patch b/target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch index bac031aba3..6e8aec9fc6 100644 --- a/target/linux/ramips/patches-3.10/0507-MTD-add-mt7621-nand-support.patch +++ b/target/linux/ramips/patches-3.10/0213-MTD-add-mt7621-nand-support.patch @@ -1,7 +1,7 @@ -From 203189714320fe43b4c0cf953efec9e28963c03b Mon Sep 17 00:00:00 2001 +From 3598d232eb3456fa7aca78e6eeea64210b49c1fc Mon Sep 17 00:00:00 2001 From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:23:57 +0100 -Subject: [PATCH 507/507] MTD: add mt7621 nand support +Date: Fri, 24 Jan 2014 17:01:21 +0100 +Subject: [PATCH 213/215] MTD: add mt7621 nand support Signed-off-by: John Crispin <blogic@openwrt.org> --- @@ -14,11 +14,11 @@ Signed-off-by: John Crispin <blogic@openwrt.org> drivers/mtd/nand/mtk_nand.c | 2304 +++++++++++++++++++++++++++++++++++ drivers/mtd/nand/mtk_nand.h | 452 +++++++ drivers/mtd/nand/nand_base.c | 6 +- - drivers/mtd/nand/nand_bbt.c | 19 + + drivers/mtd/nand/nand_bbt.c | 41 + drivers/mtd/nand/nand_def.h | 123 ++ drivers/mtd/nand/nand_device_list.h | 55 + drivers/mtd/nand/partition.h | 115 ++ - 13 files changed, 4311 insertions(+), 3 deletions(-) + 13 files changed, 4333 insertions(+), 3 deletions(-) create mode 100644 drivers/mtd/nand/bmt.c create mode 100644 drivers/mtd/nand/bmt.h create mode 100644 drivers/mtd/nand/dev-nand.c @@ -4089,10 +4089,32 @@ Signed-off-by: John Crispin <blogic@openwrt.org> struct nand_chip *chip = mtd->priv; --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c -@@ -1378,6 +1378,25 @@ int nand_isbad_bbt(struct mtd_info *mtd, +@@ -1378,6 +1378,47 @@ int nand_isbad_bbt(struct mtd_info *mtd, return 1; } ++/** ++ * nand_markbad_bbt - [NAND Interface] Mark a block bad in the BBT ++ * @mtd: MTD device structure ++ * @offs: offset of the bad block ++ */ ++int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs) ++{ ++ struct nand_chip *this = mtd->priv; ++ int block, ret = 0; ++ ++ block = (int)(offs >> this->bbt_erase_shift); ++ ++ /* Mark bad block in memory */ ++ bbt_mark_entry(this, block, BBT_BLOCK_WORN); ++ ++ /* Update flash-based bad block table */ ++ if (this->bbt_options & NAND_BBT_USE_FLASH) ++ ret = nand_update_bbt(mtd, offs); ++ ++ return ret; ++} ++ +void nand_bbt_set(struct mtd_info *mtd, int page, int flag) +{ + struct nand_chip *this = mtd->priv; diff --git a/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch b/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch new file mode 100644 index 0000000000..bcac2b43e6 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0214-usb-add-mt7621-xhci-support.patch @@ -0,0 +1,5768 @@ +From b823088d8782e02cc39c7eb4d834396b83dabe49 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Mon, 27 Jan 2014 13:11:01 +0000 +Subject: [PATCH 214/215] usb: add mt7621 xhci support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/usb/core/hub.c | 2 +- + drivers/usb/core/port.c | 3 +- + drivers/usb/host/Kconfig | 6 +- + drivers/usb/host/Makefile | 10 +- + drivers/usb/host/mtk-phy-7621.c | 445 +++++ + drivers/usb/host/mtk-phy-7621.h | 2871 +++++++++++++++++++++++++++++++++ + drivers/usb/host/mtk-phy-ahb.c | 58 + + drivers/usb/host/mtk-phy.c | 102 ++ + drivers/usb/host/mtk-phy.h | 179 ++ + drivers/usb/host/pci-quirks.h | 2 +- + drivers/usb/host/xhci-dbg.c | 3 + + drivers/usb/host/xhci-mem.c | 11 + + drivers/usb/host/xhci-mtk-power.c | 115 ++ + drivers/usb/host/xhci-mtk-power.h | 13 + + drivers/usb/host/xhci-mtk-scheduler.c | 608 +++++++ + drivers/usb/host/xhci-mtk-scheduler.h | 77 + + drivers/usb/host/xhci-mtk.c | 265 +++ + drivers/usb/host/xhci-mtk.h | 120 ++ + drivers/usb/host/xhci-plat.c | 19 + + drivers/usb/host/xhci-ring.c | 109 +- + drivers/usb/host/xhci.c | 201 ++- + drivers/usb/host/xhci.h | 23 +- + 22 files changed, 5229 insertions(+), 13 deletions(-) + create mode 100644 drivers/usb/host/mtk-phy-7621.c + create mode 100644 drivers/usb/host/mtk-phy-7621.h + create mode 100644 drivers/usb/host/mtk-phy-ahb.c + create mode 100644 drivers/usb/host/mtk-phy.c + create mode 100644 drivers/usb/host/mtk-phy.h + create mode 100644 drivers/usb/host/xhci-mtk-power.c + create mode 100644 drivers/usb/host/xhci-mtk-power.h + create mode 100644 drivers/usb/host/xhci-mtk-scheduler.c + create mode 100644 drivers/usb/host/xhci-mtk-scheduler.h + create mode 100644 drivers/usb/host/xhci-mtk.c + create mode 100644 drivers/usb/host/xhci-mtk.h + +--- a/drivers/usb/core/hub.c ++++ b/drivers/usb/core/hub.c +@@ -1254,7 +1254,7 @@ static void hub_quiesce(struct usb_hub * + if (type != HUB_SUSPEND) { + /* Disconnect all the children */ + for (i = 0; i < hdev->maxchild; ++i) { +- if (hub->ports[i]->child) ++ if (hub->ports[i] && hub->ports[i]->child) + usb_disconnect(&hub->ports[i]->child); + } + } +--- a/drivers/usb/core/port.c ++++ b/drivers/usb/core/port.c +@@ -193,6 +193,7 @@ exit: + void usb_hub_remove_port_device(struct usb_hub *hub, + int port1) + { +- device_unregister(&hub->ports[port1 - 1]->dev); ++ if (hub->ports[port1 - 1]) ++ device_unregister(&hub->ports[port1 - 1]->dev); + } + +--- a/drivers/usb/host/Kconfig ++++ b/drivers/usb/host/Kconfig +@@ -28,7 +28,11 @@ config USB_XHCI_HCD + if USB_XHCI_HCD + + config USB_XHCI_PLATFORM +- tristate ++ bool "xHCI platform" ++ ++config USB_MT7621_XHCI_PLATFORM ++ bool "MTK MT7621 xHCI" ++ depends on USB_XHCI_PLATFORM + + config USB_XHCI_HCD_DEBUGGING + bool "Debugging for the xHCI host controller" +--- a/drivers/usb/host/Makefile ++++ b/drivers/usb/host/Makefile +@@ -13,15 +13,23 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o + + xhci-hcd-y := xhci.o xhci-mem.o + xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + xhci-hcd-$(CONFIG_PCI) += xhci-pci.o ++endif ++ ++ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o ++endif + + ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) +- xhci-hcd-y += xhci-plat.o ++xhci-hcd-y += xhci-plat.o + endif + + obj-$(CONFIG_USB_WHCI_HCD) += whci/ + ++ifndef CONFIG_USB_MT7621_XHCI_PLATFORM + obj-$(CONFIG_PCI) += pci-quirks.o ++endif + + obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o + obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.c +@@ -0,0 +1,445 @@ ++#include "mtk-phy.h" ++ ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++ ++//not used on SoC ++PHY_INT32 phy_init(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase){ ++ return PHY_TRUE; ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CheckPtInRegion() ++// Description : Check if the test point is in a rectangle region. ++// If it is in the rectangle, also check if this point ++// is on the multiple of deltaX and deltaY. ++// Parameter : strucScanRegion * prEye - the region ++// BYTE bX ++// BYTE bY ++// Return : BYTE - TRUE : This point needs to be tested ++// FALSE: This point will be omitted ++// Note : First check within the rectangle. ++// Secondly, use modulous to check if the point will be tested. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CheckPtInRegion(struct strucScanRegion * prEye, PHY_INT8 bX, PHY_INT8 bY) ++{ ++ PHY_INT8 fgValid = true; ++ ++ ++ /// Be careful, the axis origin is on the TOP-LEFT corner. ++ /// Therefore the top-left point has the minimum X and Y ++ /// Botton-right point is the maximum X and Y ++ if ( (prEye->bX_tl <= bX) && (bX <= prEye->bX_br) ++ && (prEye->bY_tl <= bY) && (bY <= prEye->bX_br)) ++ { ++ // With the region, now check whether or not the input test point is ++ // on the multiples of X and Y ++ // Do not have to worry about negative value, because we have already ++ // check the input bX, and bY is within the region. ++ if ( ((bX - prEye->bX_tl) % (prEye->bDeltaX)) ++ || ((bY - prEye->bY_tl) % (prEye->bDeltaY)) ) ++ { ++ // if the division will have remainder, that means ++ // the input test point is on the multiples of X and Y ++ fgValid = false; ++ } ++ else ++ { ++ } ++ } ++ else ++ { ++ ++ fgValid = false; ++ } ++ return fgValid; ++} ++ ++//-------------------------------------------------------- ++// Function : EyeScanHelper_RunTest() ++// Description : Enable the test, and wait til it is completed ++// Parameter : None ++// Return : None ++// Note : None ++//-------------------------------------------------------- ++static void EyeScanHelper_RunTest(struct u3phy_info *info) ++{ ++ DRV_UDELAY(100); ++ // Disable the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 0); //RG_SSUSB_RX_EYE_CNT_EN = 0 ++ DRV_UDELAY(100); ++ // Run the test ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_CNT_EN_OFST, RG_SSUSB_EQ_EYE_CNT_EN, 1); //RG_SSUSB_RX_EYE_CNT_EN = 1 ++ DRV_UDELAY(100); ++ // Wait til it's done ++ //RGS_SSUSB_RX_EYE_CNT_RDY ++ while(!U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_EYE_CNT_RDY_OFST, RGS_SSUSB_EQ_EYE_CNT_RDY)); ++} ++ ++//-------------------------------------------------------- ++// Function : fgEyeScanHelper_CalNextPoint() ++// Description : Calcualte the test point for the measurement ++// Parameter : None ++// Return : BOOL - TRUE : the next point is within the ++// boundaryof HW limit ++// FALSE: the next point is out of the HW limit ++// Note : The next point is obtained by calculating ++// from the bottom left of the region rectangle ++// and then scanning up until it reaches the upper ++// limit. At this time, the x will increment, and ++// start scanning downwards until the y hits the ++// zero. ++//-------------------------------------------------------- ++static PHY_INT8 fgEyeScanHelper_CalNextPoint(void) ++{ ++ if ( ((_bYcurr == MAX_Y) && (_eScanDir == SCAN_DN)) ++ || ((_bYcurr == MIN_Y) && (_eScanDir == SCAN_UP)) ++ ) ++ { ++ /// Reaches the limit of Y axis ++ /// Increment X ++ _bXcurr++; ++ _fgXChged = true; ++ _eScanDir = (_eScanDir == SCAN_UP) ? SCAN_DN : SCAN_UP; ++ ++ if (_bXcurr > MAX_X) ++ { ++ return false; ++ } ++ } ++ else ++ { ++ _bYcurr = (_eScanDir == SCAN_DN) ? _bYcurr + 1 : _bYcurr - 1; ++ _fgXChged = false; ++ } ++ return PHY_TRUE; ++} ++ ++PHY_INT32 eyescan_init(struct u3phy_info *info){ ++ //initial PHY setting ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phya_regs->rega) ++ , RG_SSUSB_CDR_EPEN_OFST, RG_SSUSB_CDR_EPEN, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->phyd_mix3) ++ , RG_SSUSB_FORCE_CDR_PI_PWD_OFST, RG_SSUSB_FORCE_CDR_PI_PWD, 1); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ return PHY_TRUE; ++} ++ ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt){ ++ PHY_INT32 cOfst = 0; ++ PHY_UINT8 bIdxX = 0; ++ PHY_UINT8 bIdxY = 0; ++ //PHY_INT8 bCnt = 0; ++ PHY_UINT8 bIdxCycCnt = 0; ++ PHY_INT8 fgValid; ++ PHY_INT8 cX; ++ PHY_INT8 cY; ++ PHY_UINT8 bExtendCnt; ++ PHY_INT8 isContinue; ++ //PHY_INT8 isBreak; ++ PHY_UINT32 wErr0 = 0, wErr1 = 0; ++ //PHY_UINT32 temp; ++ ++ PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++ ++ _rEye1.bX_tl = x_t1; ++ _rEye1.bY_tl = y_t1; ++ _rEye1.bX_br = x_br; ++ _rEye1.bY_br = y_br; ++ _rEye1.bDeltaX = delta_x; ++ _rEye1.bDeltaY = delta_y; ++ ++ _rEye2.bX_tl = x_t1; ++ _rEye2.bY_tl = y_t1; ++ _rEye2.bX_br = x_br; ++ _rEye2.bY_br = y_br; ++ _rEye2.bDeltaX = delta_x; ++ _rEye2.bDeltaY = delta_y; ++ ++ _rTestCycle.wEyeCnt = eye_cnt; ++ _rTestCycle.bNumOfEyeCnt = num_cnt; ++ _rTestCycle.bNumOfIgnoreCnt = num_ignore_cnt; ++ _rTestCycle.bPICalEn = PI_cal_en; ++ ++ _bXcurr = 0; ++ _bYcurr = 0; ++ _eScanDir = SCAN_DN; ++ _fgXChged = false; ++ ++ printk("x_t1: %x, y_t1: %x, x_br: %x, y_br: %x, delta_x: %x, delta_y: %x, \ ++ eye_cnt: %x, num_cnt: %x, PI_cal_en: %x, num_ignore_cnt: %x\n", \ ++ x_t1, y_t1, x_br, y_br, delta_x, delta_y, eye_cnt, num_cnt, PI_cal_en, num_ignore_cnt); ++ ++ //force SIGDET to OFF ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_SEL_OFST, RG_SSUSB_RX_SIGDET_EN_SEL, 1); //RG_SSUSB_RX_SIGDET_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_SIGDET_EN_OFST, RG_SSUSB_RX_SIGDET_EN, 0); //RG_SSUSB_RX_SIGDET_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_SIGDET_OFST, RG_SSUSB_EQ_SIGDET, 0); //RG_SSUSB_RX_SIGDET = 0 ++ ++ // RX_TRI_DET_EN to Disable ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq3) ++ , RG_SSUSB_EQ_TRI_DET_EN_OFST, RG_SSUSB_EQ_TRI_DET_EN, 0); //RG_SSUSB_RX_TRI_DET_EN = 0 ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, 0); //RG_SSUSB_RX_EYE_XOFFSET = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, 0); //RG_SSUSB_RX_EYE0_Y = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, 0); //RG_SSUSB_RX_EYE1_Y = 0 ++ ++ ++ if (PI_cal_en){ ++ // PI Calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_SEL_OFST, RG_SSUSB_RX_PI_CAL_EN_SEL, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_SEL = 1 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 1); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 1 ++ ++ DRV_UDELAY(20); ++ ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_bank2_regs->b2_phyd_misc0) ++ , RG_SSUSB_RX_PI_CAL_EN_OFST, RG_SSUSB_RX_PI_CAL_EN, 0); //RG_SSUSB_RX_PI_CAL_MANUAL_EN = 0 ++ _bPIResult = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon5) ++ , RGS_SSUSB_EQ_PILPO_OFST, RGS_SSUSB_EQ_PILPO); //read RGS_SSUSB_RX_PILPO ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ } ++ // Read Initial DAC ++ // Set CYCLE ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye3) ++ ,RG_SSUSB_EQ_EYE_CNT_OFST, RG_SSUSB_EQ_EYE_CNT, eye_cnt); //RG_SSUSB_RX_EYE_CNT ++ ++ // Eye Monitor Feature ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye1) ++ , RG_SSUSB_EQ_EYE_MASK_OFST, RG_SSUSB_EQ_EYE_MASK, 0x3ff); //RG_SSUSB_RX_EYE_MASK = 0x3ff ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_MON_EN_OFST, RG_SSUSB_EQ_EYE_MON_EN, 1); //RG_SSUSB_EYE_MON_EN = 1 ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 0; cOfst >= -64; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ ,RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 0; cOfst < 64; cOfst++) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); //RG_SSUSB_RX_EYE1_Y ++ } ++ //ClearErrorResult ++ for(bIdxCycCnt = 0; bIdxCycCnt < CYCLE_COUNT_MAX; bIdxCycCnt++){ ++ for(bIdxX = 0; bIdxX < ERRCNT_MAX; bIdxX++) ++ { ++ for(bIdxY = 0; bIdxY < ERRCNT_MAX; bIdxY++){ ++ pwErrCnt0[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ pwErrCnt1[bIdxCycCnt][bIdxX][bIdxY] = 0; ++ } ++ } ++ } ++ isContinue = true; ++ while(isContinue){ ++ //printk(KERN_ERR "_bXcurr: %d, _bYcurr: %d\n", _bXcurr, _bYcurr); ++ // The point is within the boundary, then let's check if it is within ++ // the testing region. ++ // The point is only test-able if one of the eye region ++ // includes this point. ++ fgValid = fgEyeScanHelper_CheckPtInRegion(&_rEye1, _bXcurr, _bYcurr) ++ || fgEyeScanHelper_CheckPtInRegion(&_rEye2, _bXcurr, _bYcurr); ++ // Translate bX and bY to 2's complement from where the origin was on the ++ // top left corner. ++ // 0x40 and 0x3F needs a bit of thinking!!!! >"< ++ cX = (_bXcurr ^ 0x40); ++ cY = (_bYcurr ^ 0x3F); ++ ++ // Set X if necessary ++ if (_fgXChged == true) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cX); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ // Set Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cY); //RG_SSUSB_RX_EYE0_Y ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cY); //RG_SSUSB_RX_EYE1_Y ++ ++ /// Test this point! ++ if (fgValid){ ++ for (bExtendCnt = 0; bExtendCnt < num_ignore_cnt; bExtendCnt++) ++ { ++ //run test ++ EyeScanHelper_RunTest(info); ++ } ++ for (bExtendCnt = 0; bExtendCnt < num_cnt; bExtendCnt++) ++ { ++ EyeScanHelper_RunTest(info); ++ wErr0 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon3) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0); ++ wErr1 = U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->phya_rx_mon4) ++ , RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST, RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1); ++ ++ pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr] = wErr0; ++ pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr] = wErr1; ++ ++ //EyeScanHelper_GetResult(&_rRes.pwErrCnt0[bCnt], &_rRes.pwErrCnt1[bCnt]); ++// printk(KERN_ERR "cnt[%d] cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n" ++// , bExtendCnt, _bXcurr, _bYcurr, cX, cY, pwErrCnt0[bExtendCnt][_bXcurr][_bYcurr], pwErrCnt1[bExtendCnt][_bXcurr][_bYcurr]); ++ } ++ //printk(KERN_ERR "cur_x,y [0x%x][0x%x], cX,cY [0x%x][0x%x], ErrCnt[%d][%d]\n", _bXcurr, _bYcurr, cX, cY, pwErrCnt0[0][_bXcurr][_bYcurr], pwErrCnt1[0][_bXcurr][_bYcurr]); ++ } ++ else{ ++ ++ } ++ if (fgEyeScanHelper_CalNextPoint() == false){ ++#if 0 ++ printk(KERN_ERR "Xcurr [0x%x] Ycurr [0x%x]\n", _bXcurr, _bYcurr); ++ printk(KERN_ERR "XcurrREG [0x%x] YcurrREG [0x%x]\n", cX, cY); ++#endif ++ printk(KERN_ERR "end of eye scan\n"); ++ isContinue = false; ++ } ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ // Move X,Y to the top-left corner ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET, cOfst); //RG_SSUSB_RX_EYE_XOFFSET ++ } ++ for (cOfst = 63; cOfst >= 0; cOfst--) ++ { ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y, cOfst); ++ U3PhyWriteField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0) ++ , RG_SSUSB_EQ_EYE1_Y_OFST, RG_SSUSB_EQ_EYE1_Y, cOfst); ++ ++ } ++ printk(KERN_ERR "CurX [0x%x] CurY [0x%x]\n" ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE_XOFFSET_OFST, RG_SSUSB_EQ_EYE_XOFFSET) ++ , U3PhyReadField32(((PHY_UINT32)&info->u3phyd_regs->eq_eye0), RG_SSUSB_EQ_EYE0_Y_OFST, RG_SSUSB_EQ_EYE0_Y)); ++ ++ printk(KERN_ERR "PI result: %d\n", _bPIResult); ++ printk(KERN_ERR "pwErrCnt0 addr: 0x%x\n", (PHY_UINT32)pwErrCnt0); ++ printk(KERN_ERR "pwErrCnt1 addr: 0x%x\n", (PHY_UINT32)pwErrCnt1); ++ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++//not used on SoC ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info){ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info){ ++ PHY_INT32 i=0; ++ //PHY_INT32 j=0; ++ //PHY_INT8 u1SrCalVal = 0; ++ //PHY_INT8 u1Reg_addr_HSTX_SRCAL_EN; ++ PHY_INT32 fgRet = 0; ++ PHY_INT32 u4FmOut = 0; ++ PHY_INT32 u4Tmp = 0; ++ //PHY_INT32 temp; ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 1 ++ // enable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0x1); ++ DRV_MSLEEP(1); ++ ++ // => RG_FRCK_EN = 1 ++ // Enable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 1); ++ ++ // MT6290 HS signal quality patch ++ // => RG_CYCLECNT = 400 ++ // Setting cyclecnt =400 ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_CYCLECNT_OFST, RG_CYCLECNT, 0x400); ++ ++ // => RG_FREQDET_EN = 1 ++ // Enable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0x1); ++ ++ // wait for FM detection done, set 10ms timeout ++ for(i=0; i<10; i++){ ++ // => u4FmOut = USB_FM_OUT ++ // read FM_OUT ++ u4FmOut = U3PhyReadReg32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr0)); ++ printk("FM_OUT value: u4FmOut = %d(0x%08X)\n", u4FmOut, u4FmOut); ++ ++ // check if FM detection done ++ if (u4FmOut != 0) ++ { ++ fgRet = 0; ++ printk("FM detection done! loop = %d\n", i); ++ ++ break; ++ } ++ ++ fgRet = 1; ++ DRV_MSLEEP(1); ++ } ++ // => RG_FREQDET_EN = 0 ++ // disable frequency meter ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmcr0) ++ , RG_FREQDET_EN_OFST, RG_FREQDET_EN, 0); ++ ++ // => RG_FRCK_EN = 0 ++ // disable free run clock ++ U3PhyWriteField32(((PHY_UINT32)&info->sifslv_fm_regs->fmmonr1) ++ , RG_FRCK_EN_OFST, RG_FRCK_EN, 0); ++ ++ // => RG_USB20_HSTX_SRCAL_EN = 0 ++ // disable HS TX SR calibration ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCAL_EN_OFST, RG_USB20_HSTX_SRCAL_EN, 0); ++ DRV_MSLEEP(1); ++ ++ if(u4FmOut == 0){ ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, 0x4); ++ ++ fgRet = 1; ++ } ++ else{ ++ // set reg = (1024/FM_OUT) * 25 * 0.028 (round to the nearest digits) ++ u4Tmp = (((1024 * 25 * U2_SR_COEF_7621) / u4FmOut) + 500) / 1000; ++ printk("SR calibration value u1SrCalVal = %d\n", (PHY_UINT8)u4Tmp); ++ U3PhyWriteField32(((PHY_UINT32)&info->u2phy_regs->u2phyacr0) ++ , RG_USB20_HSTX_SRCTRL_OFST, RG_USB20_HSTX_SRCTRL, u4Tmp); ++ } ++ return fgRet; ++} ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-7621.h +@@ -0,0 +1,2871 @@ ++#ifdef CONFIG_PROJECT_7621 ++#ifndef __MTK_PHY_7621_H ++#define __MTK_PHY_7621_H ++ ++#define U2_SR_COEF_7621 28 ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u2phy_reg { ++ //0x0 ++ PHY_LE32 u2phyac0; ++ PHY_LE32 u2phyac1; ++ PHY_LE32 u2phyac2; ++ PHY_LE32 reserve0; ++ //0x10 ++ PHY_LE32 u2phyacr0; ++ PHY_LE32 u2phyacr1; ++ PHY_LE32 u2phyacr2; ++ PHY_LE32 u2phyacr3; ++ //0x20 ++ PHY_LE32 u2phyacr4; ++ PHY_LE32 u2phyamon0; ++ PHY_LE32 reserve1[2]; ++ //0x30~0x50 ++ PHY_LE32 reserve2[12]; ++ //0x60 ++ PHY_LE32 u2phydcr0; ++ PHY_LE32 u2phydcr1; ++ PHY_LE32 u2phydtm0; ++ PHY_LE32 u2phydtm1; ++ //0x70 ++ PHY_LE32 u2phydmon0; ++ PHY_LE32 u2phydmon1; ++ PHY_LE32 u2phydmon2; ++ PHY_LE32 u2phydmon3; ++ //0x80 ++ PHY_LE32 u2phybc12c; ++ PHY_LE32 u2phybc12c1; ++ PHY_LE32 reserve3[2]; ++ //0x90~0xe0 ++ PHY_LE32 reserve4[24]; ++ //0xf0 ++ PHY_LE32 reserve6[3]; ++ PHY_LE32 regfcom; ++}; ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN (0x7<<28) //30:28 ++#define RG_USB20_USBPLL_CKCTRL (0x3<<26) //27:26 ++#define RG_USB20_USBPLL_PREDIV (0x3<<24) //25:24 ++#define RG_USB20_USBPLL_FORCE_ON (0x1<<23) //23:23 ++#define RG_USB20_USBPLL_FBDIV (0x7f<<16) //22:16 ++#define RG_USB20_REF_EN (0x1<<15) //15:15 ++#define RG_USB20_INTR_EN (0x1<<14) //14:14 ++#define RG_USB20_BG_TRIM (0xf<<8) //11:8 ++#define RG_USB20_BG_RBSEL (0x3<<6) //7:6 ++#define RG_USB20_BG_RASEL (0x3<<4) //5:4 ++#define RG_USB20_BGR_DIV (0x3<<2) //3:2 ++#define RG_SIFSLV_CHP_EN (0x1<<1) //1:1 ++#define RG_SIFSLV_BGR_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL (0x7<<28) //30:28 ++#define RG_USB20_TERM_VREF_SEL (0x7<<24) //26:24 ++#define RG_USB20_MPX_SEL (0xff<<16) //23:16 ++#define RG_USB20_MPX_OUT_SEL (0x3<<12) //13:12 ++#define RG_USB20_TX_PH_ROT_SEL (0x7<<8) //10:8 ++#define RG_USB20_USBPLL_ACCEN (0x1<<3) //3:3 ++#define RG_USB20_USBPLL_LF (0x1<<2) //2:2 ++#define RG_USB20_USBPLL_BR (0x1<<1) //1:1 ++#define RG_USB20_USBPLL_BP (0x1<<0) //0:0 ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN (0x1<<17) //17:17 ++#define RG_SIFSLV_MAC_CHOPPER_EN (0x1<<16) //16:16 ++#define RG_USB20_CLKREF_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN (0x1<<24) //24:24 ++#define RG_USB20_HSTX_SRCAL_EN (0x1<<23) //23:23 ++#define RG_USB20_HSTX_SRCTRL (0x7<<16) //18:16 ++#define RG_USB20_LS_CR (0x7<<12) //14:12 ++#define RG_USB20_FS_CR (0x7<<8) //10:8 ++#define RG_USB20_LS_SR (0x7<<4) //6:4 ++#define RG_USB20_FS_SR (0x7<<0) //2:0 ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG (0x3<<28) //29:28 ++#define RG_USB20_SQD (0x3<<24) //25:24 ++#define RG_USB20_HSTX_TMODE_SEL (0x3<<20) //21:20 ++#define RG_USB20_HSTX_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_PHYD_MONEN (0x1<<18) //18:18 ++#define RG_USB20_INLPBK_EN (0x1<<17) //17:17 ++#define RG_USB20_CHIRP_EN (0x1<<16) //16:16 ++#define RG_USB20_DM_ABIST_SOURCE_EN (0x1<<15) //15:15 ++#define RG_USB20_DM_ABIST_SELE (0xf<<8) //11:8 ++#define RG_USB20_DP_ABIST_SOURCE_EN (0x1<<7) //7:7 ++#define RG_USB20_DP_ABIST_SELE (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE (0x7<<29) //31:29 ++#define RG_USB20_OTG_ABIST_EN (0x1<<28) //28:28 ++#define RG_USB20_OTG_VBUSCMP_EN (0x1<<27) //27:27 ++#define RG_USB20_OTG_VBUSTH (0x7<<24) //26:24 ++#define RG_USB20_DISC_FIT_EN (0x1<<22) //22:22 ++#define RG_USB20_DISCD (0x3<<20) //21:20 ++#define RG_USB20_DISCTH (0xf<<16) //19:16 ++#define RG_USB20_SQCAL_EN (0x1<<15) //15:15 ++#define RG_USB20_SQCAL (0xf<<8) //11:8 ++#define RG_USB20_SQTH (0xf<<0) //3:0 ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST (0xf<<28) //31:28 ++#define RG_USB20_HSTX_BIST_EN (0x1<<26) //26:26 ++#define RG_USB20_HSTX_I_EN_MODE (0x3<<24) //25:24 ++#define RG_USB20_HSRX_TMODE_EN (0x1<<23) //23:23 ++#define RG_USB20_HSRX_BIAS_EN_SEL (0x3<<20) //21:20 ++#define RG_USB20_USB11_TMODE_EN (0x1<<19) //19:19 ++#define RG_USB20_TMODE_FS_LS_TX_EN (0x1<<18) //18:18 ++#define RG_USB20_TMODE_FS_LS_RCV_EN (0x1<<17) //17:17 ++#define RG_USB20_TMODE_FS_LS_MODE (0x1<<16) //16:16 ++#define RG_USB20_HS_TERM_EN_MODE (0x3<<13) //14:13 ++#define RG_USB20_PUPD_BIST_EN (0x1<<12) //12:12 ++#define RG_USB20_EN_PU_DM (0x1<<11) //11:11 ++#define RG_USB20_EN_PD_DM (0x1<<10) //10:10 ++#define RG_USB20_EN_PU_DP (0x1<<9) //9:9 ++#define RG_USB20_EN_PD_DP (0x1<<8) //8:8 ++#define RG_USB20_PHY_REV (0xff<<0) //7:0 ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE (0x1<<18) //18:18 ++#define RG_USB20_DM_100K_EN (0x1<<17) //17:17 ++#define USB20_DP_100K_EN (0x1<<16) //16:16 ++#define USB20_GPIO_DM_I (0x1<<15) //15:15 ++#define USB20_GPIO_DP_I (0x1<<14) //14:14 ++#define USB20_GPIO_DM_OE (0x1<<13) //13:13 ++#define USB20_GPIO_DP_OE (0x1<<12) //12:12 ++#define RG_USB20_GPIO_CTL (0x1<<9) //9:9 ++#define USB20_GPIO_MODE (0x1<<8) //8:8 ++#define RG_USB20_TX_BIAS_EN (0x1<<5) //5:5 ++#define RG_USB20_TX_VCMPDN_EN (0x1<<4) //4:4 ++#define RG_USB20_HS_SQ_EN_MODE (0x3<<2) //3:2 ++#define RG_USB20_HS_RCV_EN_MODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O (0x1<<1) //1:1 ++#define RGO_USB20_GPIO_DP_O (0x1<<0) //0:0 ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST (0x3<<30) //31:30 ++#define RG_USB20_GATED_ENB (0x1<<29) //29:29 ++#define RG_USB20_TESTMODE (0x3<<26) //27:26 ++#define RG_USB20_PLL_STABLE (0x1<<25) //25:25 ++#define RG_USB20_PLL_FORCE_ON (0x1<<24) //24:24 ++#define RG_USB20_PHYD_RESERVE (0xffff<<8) //23:8 ++#define RG_USB20_EBTHRLD (0x1<<7) //7:7 ++#define RG_USB20_EARLY_HSTX_I (0x1<<6) //6:6 ++#define RG_USB20_TX_TST (0x1<<5) //5:5 ++#define RG_USB20_NEGEDGE_ENB (0x1<<4) //4:4 ++#define RG_USB20_CDR_FILT (0xf<<0) //3:0 ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL (0xff<<24) //31:24 ++#define RG_USB20_DRVVBUS (0x1<<23) //23:23 ++#define RG_DEBUG_EN (0x1<<22) //22:22 ++#define RG_USB20_OTG_PROBE (0x3<<20) //21:20 ++#define RG_USB20_SW_PLLMODE (0x3<<18) //19:18 ++#define RG_USB20_BERTH (0x3<<16) //17:16 ++#define RG_USB20_LBMODE (0x3<<13) //14:13 ++#define RG_USB20_FORCE_TAP (0x1<<12) //12:12 ++#define RG_USB20_TAPSEL (0xfff<<0) //11:0 ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE (0x3<<30) //31:30 ++#define FORCE_UART_I (0x1<<29) //29:29 ++#define FORCE_UART_BIAS_EN (0x1<<28) //28:28 ++#define FORCE_UART_TX_OE (0x1<<27) //27:27 ++#define FORCE_UART_EN (0x1<<26) //26:26 ++#define FORCE_USB_CLKEN (0x1<<25) //25:25 ++#define FORCE_DRVVBUS (0x1<<24) //24:24 ++#define FORCE_DATAIN (0x1<<23) //23:23 ++#define FORCE_TXVALID (0x1<<22) //22:22 ++#define FORCE_DM_PULLDOWN (0x1<<21) //21:21 ++#define FORCE_DP_PULLDOWN (0x1<<20) //20:20 ++#define FORCE_XCVRSEL (0x1<<19) //19:19 ++#define FORCE_SUSPENDM (0x1<<18) //18:18 ++#define FORCE_TERMSEL (0x1<<17) //17:17 ++#define FORCE_OPMODE (0x1<<16) //16:16 ++#define UTMI_MUXSEL (0x1<<15) //15:15 ++#define RG_RESET (0x1<<14) //14:14 ++#define RG_DATAIN (0xf<<10) //13:10 ++#define RG_TXVALIDH (0x1<<9) //9:9 ++#define RG_TXVALID (0x1<<8) //8:8 ++#define RG_DMPULLDOWN (0x1<<7) //7:7 ++#define RG_DPPULLDOWN (0x1<<6) //6:6 ++#define RG_XCVRSEL (0x3<<4) //5:4 ++#define RG_SUSPENDM (0x1<<3) //3:3 ++#define RG_TERMSEL (0x1<<2) //2:2 ++#define RG_OPMODE (0x3<<0) //1:0 ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN (0x1<<31) //31:31 ++#define RG_USB20_PRBS7_BITCNT (0x3f<<24) //29:24 ++#define RG_USB20_CLK48M_EN (0x1<<23) //23:23 ++#define RG_USB20_CLK60M_EN (0x1<<22) //22:22 ++#define RG_UART_I (0x1<<19) //19:19 ++#define RG_UART_BIAS_EN (0x1<<18) //18:18 ++#define RG_UART_TX_OE (0x1<<17) //17:17 ++#define RG_UART_EN (0x1<<16) //16:16 ++#define FORCE_VBUSVALID (0x1<<13) //13:13 ++#define FORCE_SESSEND (0x1<<12) //12:12 ++#define FORCE_BVALID (0x1<<11) //11:11 ++#define FORCE_AVALID (0x1<<10) //10:10 ++#define FORCE_IDDIG (0x1<<9) //9:9 ++#define FORCE_IDPULLUP (0x1<<8) //8:8 ++#define RG_VBUSVALID (0x1<<5) //5:5 ++#define RG_SESSEND (0x1<<4) //4:4 ++#define RG_BVALID (0x1<<3) //3:3 ++#define RG_AVALID (0x1<<2) //2:2 ++#define RG_IDDIG (0x1<<1) //1:1 ++#define RG_IDPULLUP (0x1<<0) //0:0 ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O (0x1<<31) //31:31 ++#define RGO_USB20_LB_PASS (0x1<<30) //30:30 ++#define RGO_USB20_LB_DONE (0x1<<29) //29:29 ++#define AD_USB20_BVALID (0x1<<28) //28:28 ++#define USB20_IDDIG (0x1<<27) //27:27 ++#define AD_USB20_VBUSVALID (0x1<<26) //26:26 ++#define AD_USB20_SESSEND (0x1<<25) //25:25 ++#define AD_USB20_AVALID (0x1<<24) //24:24 ++#define USB20_LINE_STATE (0x3<<22) //23:22 ++#define USB20_HST_DISCON (0x1<<21) //21:21 ++#define USB20_TX_READY (0x1<<20) //20:20 ++#define USB20_RX_ERROR (0x1<<19) //19:19 ++#define USB20_RX_ACTIVE (0x1<<18) //18:18 ++#define USB20_RX_VALIDH (0x1<<17) //17:17 ++#define USB20_RX_VALID (0x1<<16) //16:16 ++#define USB20_DATA_OUT (0xffff<<0) //15:0 ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT (0xff<<24) //31:24 ++#define RGO_RXACTIVE_CNT (0xff<<16) //23:16 ++#define RGO_USB20_LB_BERCNT (0xff<<8) //15:8 ++#define USB20_PROBE_OUT (0xff<<0) //7:0 ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT (0xffff<<16) //31:16 ++#define RGO_USB20_PRBS7_DONE (0x1<<3) //3:3 ++#define RGO_USB20_PRBS7_LOCK (0x1<<2) //2:2 ++#define RGO_USB20_PRBS7_PASS (0x1<<1) //1:1 ++#define RGO_USB20_PRBS7_PASSTH (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT (0xf<<28) //31:28 ++#define RG_SIFSLV_CHGDT_CTRL_CNT (0xf<<24) //27:24 ++#define RG_SIFSLV_CHGDT_FORCE_MODE (0x1<<16) //16:16 ++#define RG_CHGDT_ISRC_LEV (0x3<<14) //15:14 ++#define RG_CHGDT_VDATSRC (0x1<<13) //13:13 ++#define RG_CHGDT_BGVREF_SEL (0x7<<10) //12:10 ++#define RG_CHGDT_RDVREF_SEL (0x3<<8) //9:8 ++#define RG_CHGDT_ISRC_DP (0x1<<7) //7:7 ++#define RG_SIFSLV_CHGDT_OPOUT_DM (0x1<<6) //6:6 ++#define RG_CHGDT_VDAT_DM (0x1<<5) //5:5 ++#define RG_CHGDT_OPOUT_DP (0x1<<4) //4:4 ++#define RG_SIFSLV_CHGDT_VDAT_DP (0x1<<3) //3:3 ++#define RG_SIFSLV_CHGDT_COMP_EN (0x1<<2) //2:2 ++#define RG_SIFSLV_CHGDT_OPDRV_EN (0x1<<1) //1:1 ++#define RG_CHGDT_EN (0x1<<0) //0:0 ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV (0xff<<0) //7:0 ++ ++//U3D_REGFCOM ++#define RG_PAGE (0xff<<24) //31:24 ++#define I2C_MODE (0x1<<16) //16:16 ++ ++ ++/* OFFSET */ ++ ++//U3D_U2PHYAC0 ++#define RG_USB20_USBPLL_DIVEN_OFST (28) ++#define RG_USB20_USBPLL_CKCTRL_OFST (26) ++#define RG_USB20_USBPLL_PREDIV_OFST (24) ++#define RG_USB20_USBPLL_FORCE_ON_OFST (23) ++#define RG_USB20_USBPLL_FBDIV_OFST (16) ++#define RG_USB20_REF_EN_OFST (15) ++#define RG_USB20_INTR_EN_OFST (14) ++#define RG_USB20_BG_TRIM_OFST (8) ++#define RG_USB20_BG_RBSEL_OFST (6) ++#define RG_USB20_BG_RASEL_OFST (4) ++#define RG_USB20_BGR_DIV_OFST (2) ++#define RG_SIFSLV_CHP_EN_OFST (1) ++#define RG_SIFSLV_BGR_EN_OFST (0) ++ ++//U3D_U2PHYAC1 ++#define RG_USB20_VRT_VREF_SEL_OFST (28) ++#define RG_USB20_TERM_VREF_SEL_OFST (24) ++#define RG_USB20_MPX_SEL_OFST (16) ++#define RG_USB20_MPX_OUT_SEL_OFST (12) ++#define RG_USB20_TX_PH_ROT_SEL_OFST (8) ++#define RG_USB20_USBPLL_ACCEN_OFST (3) ++#define RG_USB20_USBPLL_LF_OFST (2) ++#define RG_USB20_USBPLL_BR_OFST (1) ++#define RG_USB20_USBPLL_BP_OFST (0) ++ ++//U3D_U2PHYAC2 ++#define RG_SIFSLV_MAC_BANDGAP_EN_OFST (17) ++#define RG_SIFSLV_MAC_CHOPPER_EN_OFST (16) ++#define RG_USB20_CLKREF_REV_OFST (0) ++ ++//U3D_U2PHYACR0 ++#define RG_USB20_ICUSB_EN_OFST (24) ++#define RG_USB20_HSTX_SRCAL_EN_OFST (23) ++#define RG_USB20_HSTX_SRCTRL_OFST (16) ++#define RG_USB20_LS_CR_OFST (12) ++#define RG_USB20_FS_CR_OFST (8) ++#define RG_USB20_LS_SR_OFST (4) ++#define RG_USB20_FS_SR_OFST (0) ++ ++//U3D_U2PHYACR1 ++#define RG_USB20_INIT_SQ_EN_DG_OFST (28) ++#define RG_USB20_SQD_OFST (24) ++#define RG_USB20_HSTX_TMODE_SEL_OFST (20) ++#define RG_USB20_HSTX_TMODE_EN_OFST (19) ++#define RG_USB20_PHYD_MONEN_OFST (18) ++#define RG_USB20_INLPBK_EN_OFST (17) ++#define RG_USB20_CHIRP_EN_OFST (16) ++#define RG_USB20_DM_ABIST_SOURCE_EN_OFST (15) ++#define RG_USB20_DM_ABIST_SELE_OFST (8) ++#define RG_USB20_DP_ABIST_SOURCE_EN_OFST (7) ++#define RG_USB20_DP_ABIST_SELE_OFST (0) ++ ++//U3D_U2PHYACR2 ++#define RG_USB20_OTG_ABIST_SELE_OFST (29) ++#define RG_USB20_OTG_ABIST_EN_OFST (28) ++#define RG_USB20_OTG_VBUSCMP_EN_OFST (27) ++#define RG_USB20_OTG_VBUSTH_OFST (24) ++#define RG_USB20_DISC_FIT_EN_OFST (22) ++#define RG_USB20_DISCD_OFST (20) ++#define RG_USB20_DISCTH_OFST (16) ++#define RG_USB20_SQCAL_EN_OFST (15) ++#define RG_USB20_SQCAL_OFST (8) ++#define RG_USB20_SQTH_OFST (0) ++ ++//U3D_U2PHYACR3 ++#define RG_USB20_HSTX_DBIST_OFST (28) ++#define RG_USB20_HSTX_BIST_EN_OFST (26) ++#define RG_USB20_HSTX_I_EN_MODE_OFST (24) ++#define RG_USB20_HSRX_TMODE_EN_OFST (23) ++#define RG_USB20_HSRX_BIAS_EN_SEL_OFST (20) ++#define RG_USB20_USB11_TMODE_EN_OFST (19) ++#define RG_USB20_TMODE_FS_LS_TX_EN_OFST (18) ++#define RG_USB20_TMODE_FS_LS_RCV_EN_OFST (17) ++#define RG_USB20_TMODE_FS_LS_MODE_OFST (16) ++#define RG_USB20_HS_TERM_EN_MODE_OFST (13) ++#define RG_USB20_PUPD_BIST_EN_OFST (12) ++#define RG_USB20_EN_PU_DM_OFST (11) ++#define RG_USB20_EN_PD_DM_OFST (10) ++#define RG_USB20_EN_PU_DP_OFST (9) ++#define RG_USB20_EN_PD_DP_OFST (8) ++#define RG_USB20_PHY_REV_OFST (0) ++ ++//U3D_U2PHYACR4 ++#define RG_USB20_DP_100K_MODE_OFST (18) ++#define RG_USB20_DM_100K_EN_OFST (17) ++#define USB20_DP_100K_EN_OFST (16) ++#define USB20_GPIO_DM_I_OFST (15) ++#define USB20_GPIO_DP_I_OFST (14) ++#define USB20_GPIO_DM_OE_OFST (13) ++#define USB20_GPIO_DP_OE_OFST (12) ++#define RG_USB20_GPIO_CTL_OFST (9) ++#define USB20_GPIO_MODE_OFST (8) ++#define RG_USB20_TX_BIAS_EN_OFST (5) ++#define RG_USB20_TX_VCMPDN_EN_OFST (4) ++#define RG_USB20_HS_SQ_EN_MODE_OFST (2) ++#define RG_USB20_HS_RCV_EN_MODE_OFST (0) ++ ++//U3D_U2PHYAMON0 ++#define RGO_USB20_GPIO_DM_O_OFST (1) ++#define RGO_USB20_GPIO_DP_O_OFST (0) ++ ++//U3D_U2PHYDCR0 ++#define RG_USB20_CDR_TST_OFST (30) ++#define RG_USB20_GATED_ENB_OFST (29) ++#define RG_USB20_TESTMODE_OFST (26) ++#define RG_USB20_PLL_STABLE_OFST (25) ++#define RG_USB20_PLL_FORCE_ON_OFST (24) ++#define RG_USB20_PHYD_RESERVE_OFST (8) ++#define RG_USB20_EBTHRLD_OFST (7) ++#define RG_USB20_EARLY_HSTX_I_OFST (6) ++#define RG_USB20_TX_TST_OFST (5) ++#define RG_USB20_NEGEDGE_ENB_OFST (4) ++#define RG_USB20_CDR_FILT_OFST (0) ++ ++//U3D_U2PHYDCR1 ++#define RG_USB20_PROBE_SEL_OFST (24) ++#define RG_USB20_DRVVBUS_OFST (23) ++#define RG_DEBUG_EN_OFST (22) ++#define RG_USB20_OTG_PROBE_OFST (20) ++#define RG_USB20_SW_PLLMODE_OFST (18) ++#define RG_USB20_BERTH_OFST (16) ++#define RG_USB20_LBMODE_OFST (13) ++#define RG_USB20_FORCE_TAP_OFST (12) ++#define RG_USB20_TAPSEL_OFST (0) ++ ++//U3D_U2PHYDTM0 ++#define RG_UART_MODE_OFST (30) ++#define FORCE_UART_I_OFST (29) ++#define FORCE_UART_BIAS_EN_OFST (28) ++#define FORCE_UART_TX_OE_OFST (27) ++#define FORCE_UART_EN_OFST (26) ++#define FORCE_USB_CLKEN_OFST (25) ++#define FORCE_DRVVBUS_OFST (24) ++#define FORCE_DATAIN_OFST (23) ++#define FORCE_TXVALID_OFST (22) ++#define FORCE_DM_PULLDOWN_OFST (21) ++#define FORCE_DP_PULLDOWN_OFST (20) ++#define FORCE_XCVRSEL_OFST (19) ++#define FORCE_SUSPENDM_OFST (18) ++#define FORCE_TERMSEL_OFST (17) ++#define FORCE_OPMODE_OFST (16) ++#define UTMI_MUXSEL_OFST (15) ++#define RG_RESET_OFST (14) ++#define RG_DATAIN_OFST (10) ++#define RG_TXVALIDH_OFST (9) ++#define RG_TXVALID_OFST (8) ++#define RG_DMPULLDOWN_OFST (7) ++#define RG_DPPULLDOWN_OFST (6) ++#define RG_XCVRSEL_OFST (4) ++#define RG_SUSPENDM_OFST (3) ++#define RG_TERMSEL_OFST (2) ++#define RG_OPMODE_OFST (0) ++ ++//U3D_U2PHYDTM1 ++#define RG_USB20_PRBS7_EN_OFST (31) ++#define RG_USB20_PRBS7_BITCNT_OFST (24) ++#define RG_USB20_CLK48M_EN_OFST (23) ++#define RG_USB20_CLK60M_EN_OFST (22) ++#define RG_UART_I_OFST (19) ++#define RG_UART_BIAS_EN_OFST (18) ++#define RG_UART_TX_OE_OFST (17) ++#define RG_UART_EN_OFST (16) ++#define FORCE_VBUSVALID_OFST (13) ++#define FORCE_SESSEND_OFST (12) ++#define FORCE_BVALID_OFST (11) ++#define FORCE_AVALID_OFST (10) ++#define FORCE_IDDIG_OFST (9) ++#define FORCE_IDPULLUP_OFST (8) ++#define RG_VBUSVALID_OFST (5) ++#define RG_SESSEND_OFST (4) ++#define RG_BVALID_OFST (3) ++#define RG_AVALID_OFST (2) ++#define RG_IDDIG_OFST (1) ++#define RG_IDPULLUP_OFST (0) ++ ++//U3D_U2PHYDMON0 ++#define RG_USB20_PRBS7_BERTH_OFST (0) ++ ++//U3D_U2PHYDMON1 ++#define USB20_UART_O_OFST (31) ++#define RGO_USB20_LB_PASS_OFST (30) ++#define RGO_USB20_LB_DONE_OFST (29) ++#define AD_USB20_BVALID_OFST (28) ++#define USB20_IDDIG_OFST (27) ++#define AD_USB20_VBUSVALID_OFST (26) ++#define AD_USB20_SESSEND_OFST (25) ++#define AD_USB20_AVALID_OFST (24) ++#define USB20_LINE_STATE_OFST (22) ++#define USB20_HST_DISCON_OFST (21) ++#define USB20_TX_READY_OFST (20) ++#define USB20_RX_ERROR_OFST (19) ++#define USB20_RX_ACTIVE_OFST (18) ++#define USB20_RX_VALIDH_OFST (17) ++#define USB20_RX_VALID_OFST (16) ++#define USB20_DATA_OUT_OFST (0) ++ ++//U3D_U2PHYDMON2 ++#define RGO_TXVALID_CNT_OFST (24) ++#define RGO_RXACTIVE_CNT_OFST (16) ++#define RGO_USB20_LB_BERCNT_OFST (8) ++#define USB20_PROBE_OUT_OFST (0) ++ ++//U3D_U2PHYDMON3 ++#define RGO_USB20_PRBS7_ERRCNT_OFST (16) ++#define RGO_USB20_PRBS7_DONE_OFST (3) ++#define RGO_USB20_PRBS7_LOCK_OFST (2) ++#define RGO_USB20_PRBS7_PASS_OFST (1) ++#define RGO_USB20_PRBS7_PASSTH_OFST (0) ++ ++//U3D_U2PHYBC12C ++#define RG_SIFSLV_CHGDT_DEGLCH_CNT_OFST (28) ++#define RG_SIFSLV_CHGDT_CTRL_CNT_OFST (24) ++#define RG_SIFSLV_CHGDT_FORCE_MODE_OFST (16) ++#define RG_CHGDT_ISRC_LEV_OFST (14) ++#define RG_CHGDT_VDATSRC_OFST (13) ++#define RG_CHGDT_BGVREF_SEL_OFST (10) ++#define RG_CHGDT_RDVREF_SEL_OFST (8) ++#define RG_CHGDT_ISRC_DP_OFST (7) ++#define RG_SIFSLV_CHGDT_OPOUT_DM_OFST (6) ++#define RG_CHGDT_VDAT_DM_OFST (5) ++#define RG_CHGDT_OPOUT_DP_OFST (4) ++#define RG_SIFSLV_CHGDT_VDAT_DP_OFST (3) ++#define RG_SIFSLV_CHGDT_COMP_EN_OFST (2) ++#define RG_SIFSLV_CHGDT_OPDRV_EN_OFST (1) ++#define RG_CHGDT_EN_OFST (0) ++ ++//U3D_U2PHYBC12C1 ++#define RG_CHGDT_REV_OFST (0) ++ ++//U3D_REGFCOM ++#define RG_PAGE_OFST (24) ++#define I2C_MODE_OFST (16) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg2; ++ PHY_LE32 reg3; ++ //0x10 ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ //0x20 ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ PHY_LE32 rega; ++ PHY_LE32 regb; ++ //0x30 ++ PHY_LE32 regc; ++ PHY_LE32 regd; ++ PHY_LE32 rege; ++}; ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN (0x1<<31) //31:31 ++#define RG_SSUSB_CHPEN (0x1<<30) //30:30 ++#define RG_SSUSB_BG_DIV (0x3<<28) //29:28 ++#define RG_SSUSB_INTR_EN (0x1<<26) //26:26 ++#define RG_SSUSB_MPX_OUT_SEL (0x3<<24) //25:24 ++#define RG_SSUSB_MPX_SEL (0xff<<16) //23:16 ++#define RG_SSUSB_REF_EN (0x1<<15) //15:15 ++#define RG_SSUSB_VRT_VREF_SEL (0xf<<11) //14:11 ++#define RG_SSUSB_BG_RASEL (0x3<<9) //10:9 ++#define RG_SSUSB_BG_RBSEL (0x3<<7) //8:7 ++#define RG_SSUSB_BG_MONEN (0x1<<6) //6:6 ++#define RG_PCIE_CLKDRV_OFFSET (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW (0x3<<30) //31:30 ++#define RG_PCIE_CLKDRV_AMP (0x7<<27) //29:27 ++#define RG_SSUSB_XTAL_TST_A2DCK_EN (0x1<<26) //26:26 ++#define RG_SSUSB_XTAL_MON_EN (0x1<<25) //25:25 ++#define RG_SSUSB_XTAL_HYS (0x1<<24) //24:24 ++#define RG_SSUSB_XTAL_TOP_RESERVE (0xffff<<8) //23:8 ++#define RG_SSUSB_SYSPLL_RESERVE (0xf<<4) //7:4 ++#define RG_SSUSB_SYSPLL_FBSEL (0x3<<2) //3:2 ++#define RG_SSUSB_SYSPLL_PREDIV (0x3<<0) //1:0 ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF (0x1<<31) //31:31 ++#define RG_SSUSB_SYSPLL_FBDIV (0x7f<<24) //30:24 ++#define RG_SSUSB_SYSPLL_POSDIV (0x3<<22) //23:22 ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_BLP (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_BP (0x1<<19) //19:19 ++#define RG_SSUSB_SYSPLL_BR (0x1<<18) //18:18 ++#define RG_SSUSB_SYSPLL_BC (0x1<<17) //17:17 ++#define RG_SSUSB_SYSPLL_DIVEN (0x7<<14) //16:14 ++#define RG_SSUSB_SYSPLL_FPEN (0x1<<13) //13:13 ++#define RG_SSUSB_SYSPLL_MONCK_EN (0x1<<12) //12:12 ++#define RG_SSUSB_SYSPLL_MONVC_EN (0x1<<11) //11:11 ++#define RG_SSUSB_SYSPLL_MONREF_EN (0x1<<10) //10:10 ++#define RG_SSUSB_SYSPLL_VOD_EN (0x1<<9) //9:9 ++#define RG_SSUSB_SYSPLL_CK_SEL (0x1<<8) //8:8 ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE (0xffff<<16) //31:16 ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO (0x7fffffff<<1) //31:1 ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C (0x7<<29) //31:29 ++#define RG_SSUSB_SYSPLL_DDS_HF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2 (0x1<<27) //27:27 ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2 (0x1<<26) //26:26 ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN (0x1<<25) //25:25 ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL (0x1<<24) //24:24 ++#define RG_SSUSB_SYSPLL_DDS_MONEN (0x1<<23) //23:23 ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_SYSPLL_CLK_PH_INV (0x1<<21) //21:21 ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT (0x1<<20) //20:20 ++#define RG_SSUSB_SYSPLL_DDS_DMY (0xffff<<0) //15:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB (0x1<<31) //31:31 ++#define RG_SSUSB_IDRV_ITAILOP_EN (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_CALIB (0x3f<<24) //29:24 ++#define RG_SSUSB_TX_R50_FON (0x1<<23) //23:23 ++#define RG_SSUSB_TX_SR (0x7<<20) //22:20 ++#define RG_SSUSB_TX_EIDLE_CM (0xf<<16) //19:16 ++#define RG_SSUSB_RXDET_RSEL (0x3<<14) //15:14 ++#define RG_SSUSB_RXDET_VTHSEL (0x3<<12) //13:12 ++#define RG_SSUSB_CKMON_EN (0x1<<11) //11:11 ++#define RG_SSUSB_CKMON_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_TX_VLMON_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TX_VLMON_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLBTX_EN (0x1<<5) //5:5 ++#define RG_SSUSB_TXLBRX_EN (0x1<<4) //4:4 ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE (0xfffff<<12) //31:12 ++#define RG_SSUSB_PLL_CKCTRL (0x3<<10) //11:10 ++#define RG_SSUSB_PLL_POSDIV (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_AUTOK_LOAD (0x1<<7) //7:7 ++#define RG_SSUSB_PLL_LOAD_RSTB (0x1<<6) //6:6 ++#define RG_SSUSB_PLL_EP_EN (0x1<<5) //5:5 ++#define RG_SSUSB_PLL_VOD_EN (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_V11_EN (0x1<<3) //3:3 ++#define RG_SSUSB_PLL_MONREF_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_MONCK_EN (0x1<<1) //1:1 ++#define RG_SSUSB_PLL_MONVC_EN (0x1<<0) //0:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE (0xffff<<0) //15:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_PRD (0xffff<<0) //15:0 ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_SSC_TRI_EN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_CLK_PH_INV (0x1<<29) //29:29 ++#define RG_SSUSB_PLL_DDS_LPF_EN (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_VADJ (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_DDS_MONEN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_DDS_PS_VADJ (0x7<<17) //19:17 ++#define RG_SSUSB_PLL_DDS_SEL_EXT (0x1<<16) //16:16 ++#define RG_SSUSB_CDR_PD_DIV_BYPASS (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_PD_DIV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_CPBIAS_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_OSCDET_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_MONMUX (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_CKCTRL (0x3<<9) //10:9 ++#define RG_SSUSB_CDR_ACCEN (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_BYPASS (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_PI_SLEW (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_EPEN (0x1<<3) //3:3 ++#define RG_SSUSB_CDR_AUTOK_LOAD (0x1<<2) //2:2 ++#define RG_SSUSB_CDR_LOAD_RSTB (0x1<<1) //1:1 ++#define RG_SSUSB_CDR_MONEN (0x1<<0) //0:0 ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG (0x1<<31) //31:31 ++#define RG_SSUSB_CDR_REGOD (0x3<<29) //30:29 ++#define RG_SSUSB_RX_DAC_EN (0x1<<26) //26:26 ++#define RG_SSUSB_RX_DAC_PWD (0x1<<25) //25:25 ++#define RG_SSUSB_EQ_CURSEL (0x1<<24) //24:24 ++#define RG_SSUSB_RX_DAC_MUX (0x1f<<19) //23:19 ++#define RG_SSUSB_RX_R2T_EN (0x1<<18) //18:18 ++#define RG_SSUSB_RX_T2R_EN (0x1<<17) //17:17 ++#define RG_SSUSB_RX_50_LOWER (0x7<<14) //16:14 ++#define RG_SSUSB_RX_50_TAR (0x3<<12) //13:12 ++#define RG_SSUSB_RX_SW_CTRL (0xf<<7) //10:7 ++#define RG_PCIE_SIGDET_VTH (0x3<<5) //6:5 ++#define RG_PCIE_SIGDET_LPF (0x3<<3) //4:3 ++#define RG_SSUSB_LFPS_MON_EN (0x1<<2) //2:2 ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_RESERVE (0xff<<16) //23:16 ++#define RG_SSUSB_RXAFE_RESERVE (0xff<<8) //15:8 ++#define RG_PCIE_RX_RESERVE (0xff<<0) //7:0 ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC (0x1<<8) //8:8 ++#define RGS_SSUSB_RX_DEBUG_RESERVE (0xff<<0) //7:0 ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_EXT_BIAS_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_RX_P1_ENTRY_PASS (0x1<<2) //2:2 ++#define RG_SSUSB_RX_PD_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_PD_RST_PASS (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_SSUSB_BGR_EN_OFST (31) ++#define RG_SSUSB_CHPEN_OFST (30) ++#define RG_SSUSB_BG_DIV_OFST (28) ++#define RG_SSUSB_INTR_EN_OFST (26) ++#define RG_SSUSB_MPX_OUT_SEL_OFST (24) ++#define RG_SSUSB_MPX_SEL_OFST (16) ++#define RG_SSUSB_REF_EN_OFST (15) ++#define RG_SSUSB_VRT_VREF_SEL_OFST (11) ++#define RG_SSUSB_BG_RASEL_OFST (9) ++#define RG_SSUSB_BG_RBSEL_OFST (7) ++#define RG_SSUSB_BG_MONEN_OFST (6) ++#define RG_PCIE_CLKDRV_OFFSET_OFST (0) ++ ++//U3D_reg1 ++#define RG_PCIE_CLKDRV_SLEW_OFST (30) ++#define RG_PCIE_CLKDRV_AMP_OFST (27) ++#define RG_SSUSB_XTAL_TST_A2DCK_EN_OFST (26) ++#define RG_SSUSB_XTAL_MON_EN_OFST (25) ++#define RG_SSUSB_XTAL_HYS_OFST (24) ++#define RG_SSUSB_XTAL_TOP_RESERVE_OFST (8) ++#define RG_SSUSB_SYSPLL_RESERVE_OFST (4) ++#define RG_SSUSB_SYSPLL_FBSEL_OFST (2) ++#define RG_SSUSB_SYSPLL_PREDIV_OFST (0) ++ ++//U3D_reg2 ++#define RG_SSUSB_SYSPLL_LF_OFST (31) ++#define RG_SSUSB_SYSPLL_FBDIV_OFST (24) ++#define RG_SSUSB_SYSPLL_POSDIV_OFST (22) ++#define RG_SSUSB_SYSPLL_VCO_DIV_SEL_OFST (21) ++#define RG_SSUSB_SYSPLL_BLP_OFST (20) ++#define RG_SSUSB_SYSPLL_BP_OFST (19) ++#define RG_SSUSB_SYSPLL_BR_OFST (18) ++#define RG_SSUSB_SYSPLL_BC_OFST (17) ++#define RG_SSUSB_SYSPLL_DIVEN_OFST (14) ++#define RG_SSUSB_SYSPLL_FPEN_OFST (13) ++#define RG_SSUSB_SYSPLL_MONCK_EN_OFST (12) ++#define RG_SSUSB_SYSPLL_MONVC_EN_OFST (11) ++#define RG_SSUSB_SYSPLL_MONREF_EN_OFST (10) ++#define RG_SSUSB_SYSPLL_VOD_EN_OFST (9) ++#define RG_SSUSB_SYSPLL_CK_SEL_OFST (8) ++ ++//U3D_reg3 ++#define RG_SSUSB_SYSPLL_TOP_RESERVE_OFST (16) ++ ++//U3D_reg4 ++#define RG_SSUSB_SYSPLL_PCW_NCPO_OFST (1) ++ ++//U3D_reg5 ++#define RG_SSUSB_SYSPLL_DDS_PI_C_OFST (29) ++#define RG_SSUSB_SYSPLL_DDS_HF_EN_OFST (28) ++#define RG_SSUSB_SYSPLL_DDS_PREDIV2_OFST (27) ++#define RG_SSUSB_SYSPLL_DDS_POSTDIV2_OFST (26) ++#define RG_SSUSB_SYSPLL_DDS_PI_PL_EN_OFST (25) ++#define RG_SSUSB_SYSPLL_DDS_PI_RST_SEL_OFST (24) ++#define RG_SSUSB_SYSPLL_DDS_MONEN_OFST (23) ++#define RG_SSUSB_SYSPLL_DDS_LPF_EN_OFST (22) ++#define RG_SSUSB_SYSPLL_CLK_PH_INV_OFST (21) ++#define RG_SSUSB_SYSPLL_DDS_SEL_EXT_OFST (20) ++#define RG_SSUSB_SYSPLL_DDS_DMY_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_TX250MCK_INVB_OFST (31) ++#define RG_SSUSB_IDRV_ITAILOP_EN_OFST (30) ++#define RG_SSUSB_IDRV_CALIB_OFST (24) ++#define RG_SSUSB_TX_R50_FON_OFST (23) ++#define RG_SSUSB_TX_SR_OFST (20) ++#define RG_SSUSB_TX_EIDLE_CM_OFST (16) ++#define RG_SSUSB_RXDET_RSEL_OFST (14) ++#define RG_SSUSB_RXDET_VTHSEL_OFST (12) ++#define RG_SSUSB_CKMON_EN_OFST (11) ++#define RG_SSUSB_CKMON_SEL_OFST (8) ++#define RG_SSUSB_TX_VLMON_EN_OFST (7) ++#define RG_SSUSB_TX_VLMON_SEL_OFST (6) ++#define RG_SSUSB_RXLBTX_EN_OFST (5) ++#define RG_SSUSB_TXLBRX_EN_OFST (4) ++ ++//U3D_reg7 ++#define RG_SSUSB_RESERVE_OFST (12) ++#define RG_SSUSB_PLL_CKCTRL_OFST (10) ++#define RG_SSUSB_PLL_POSDIV_OFST (8) ++#define RG_SSUSB_PLL_AUTOK_LOAD_OFST (7) ++#define RG_SSUSB_PLL_LOAD_RSTB_OFST (6) ++#define RG_SSUSB_PLL_EP_EN_OFST (5) ++#define RG_SSUSB_PLL_VOD_EN_OFST (4) ++#define RG_SSUSB_PLL_V11_EN_OFST (3) ++#define RG_SSUSB_PLL_MONREF_EN_OFST (2) ++#define RG_SSUSB_PLL_MONCK_EN_OFST (1) ++#define RG_SSUSB_PLL_MONVC_EN_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_RESERVE_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_DDS_DMY_OFST (16) ++#define RG_SSUSB_PLL_SSC_PRD_OFST (0) ++ ++//U3D_regA ++#define RG_SSUSB_PLL_SSC_PHASE_INI_OFST (31) ++#define RG_SSUSB_PLL_SSC_TRI_EN_OFST (30) ++#define RG_SSUSB_PLL_CLK_PH_INV_OFST (29) ++#define RG_SSUSB_PLL_DDS_LPF_EN_OFST (28) ++#define RG_SSUSB_PLL_DDS_VADJ_OFST (21) ++#define RG_SSUSB_PLL_DDS_MONEN_OFST (20) ++#define RG_SSUSB_PLL_DDS_PS_VADJ_OFST (17) ++#define RG_SSUSB_PLL_DDS_SEL_EXT_OFST (16) ++#define RG_SSUSB_CDR_PD_DIV_BYPASS_OFST (15) ++#define RG_SSUSB_CDR_PD_DIV_SEL_OFST (14) ++#define RG_SSUSB_CDR_CPBIAS_SEL_OFST (13) ++#define RG_SSUSB_CDR_OSCDET_EN_OFST (12) ++#define RG_SSUSB_CDR_MONMUX_OFST (11) ++#define RG_SSUSB_CDR_CKCTRL_OFST (9) ++#define RG_SSUSB_CDR_ACCEN_OFST (8) ++#define RG_SSUSB_CDR_BYPASS_OFST (6) ++#define RG_SSUSB_CDR_PI_SLEW_OFST (4) ++#define RG_SSUSB_CDR_EPEN_OFST (3) ++#define RG_SSUSB_CDR_AUTOK_LOAD_OFST (2) ++#define RG_SSUSB_CDR_LOAD_RSTB_OFST (1) ++#define RG_SSUSB_CDR_MONEN_OFST (0) ++ ++//U3D_regB ++#define RG_SSUSB_CDR_MONEN_DIG_OFST (31) ++#define RG_SSUSB_CDR_REGOD_OFST (29) ++#define RG_SSUSB_RX_DAC_EN_OFST (26) ++#define RG_SSUSB_RX_DAC_PWD_OFST (25) ++#define RG_SSUSB_EQ_CURSEL_OFST (24) ++#define RG_SSUSB_RX_DAC_MUX_OFST (19) ++#define RG_SSUSB_RX_R2T_EN_OFST (18) ++#define RG_SSUSB_RX_T2R_EN_OFST (17) ++#define RG_SSUSB_RX_50_LOWER_OFST (14) ++#define RG_SSUSB_RX_50_TAR_OFST (12) ++#define RG_SSUSB_RX_SW_CTRL_OFST (7) ++#define RG_PCIE_SIGDET_VTH_OFST (5) ++#define RG_PCIE_SIGDET_LPF_OFST (3) ++#define RG_SSUSB_LFPS_MON_EN_OFST (2) ++ ++//U3D_regC ++#define RG_SSUSB_RXAFE_DCMON_SEL_OFST (28) ++#define RG_SSUSB_CDR_RESERVE_OFST (16) ++#define RG_SSUSB_RXAFE_RESERVE_OFST (8) ++#define RG_PCIE_RX_RESERVE_OFST (0) ++ ++//U3D_redD ++#define RGS_SSUSB_CDR_NO_OSC_OFST (8) ++#define RGS_SSUSB_RX_DEBUG_RESERVE_OFST (0) ++ ++//U3D_regE ++#define RG_SSUSB_INT_BIAS_SEL_OFST (4) ++#define RG_SSUSB_EXT_BIAS_SEL_OFST (3) ++#define RG_SSUSB_RX_P1_ENTRY_PASS_OFST (2) ++#define RG_SSUSB_RX_PD_RST_OFST (1) ++#define RG_SSUSB_RX_PD_RST_PASS_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phya_da_reg { ++ //0x0 ++ PHY_LE32 reg0; ++ PHY_LE32 reg1; ++ PHY_LE32 reg4; ++ PHY_LE32 reg5; ++ //0x10 ++ PHY_LE32 reg6; ++ PHY_LE32 reg7; ++ PHY_LE32 reg8; ++ PHY_LE32 reg9; ++ //0x20 ++ PHY_LE32 reg10; ++ PHY_LE32 reg12; ++ PHY_LE32 reg13; ++ PHY_LE32 reg14; ++ //0x30 ++ PHY_LE32 reg15; ++ PHY_LE32 reg16; ++ PHY_LE32 reg19; ++ PHY_LE32 reg20; ++ //0x40 ++ PHY_LE32 reg21; ++ PHY_LE32 reg23; ++ PHY_LE32 reg25; ++ PHY_LE32 reg26; ++ //0x50 ++ PHY_LE32 reg28; ++ PHY_LE32 reg29; ++ PHY_LE32 reg30; ++ PHY_LE32 reg31; ++ //0x60 ++ PHY_LE32 reg32; ++ PHY_LE32 reg33; ++}; ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D (0x1<<24) //24:24 ++#define RG_PCIE_SPEED_PE2H (0x1<<23) //23:23 ++#define RG_PCIE_SPEED_PE1D (0x1<<22) //22:22 ++#define RG_PCIE_SPEED_PE1H (0x1<<21) //21:21 ++#define RG_PCIE_SPEED_U3 (0x1<<20) //20:20 ++#define RG_SSUSB_XTAL_EXT_EN_PE2D (0x3<<18) //19:18 ++#define RG_SSUSB_XTAL_EXT_EN_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_XTAL_EXT_EN_PE1D (0x3<<14) //15:14 ++#define RG_SSUSB_XTAL_EXT_EN_PE1H (0x3<<12) //13:12 ++#define RG_SSUSB_XTAL_EXT_EN_U3 (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_CDR_REFCK_SEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D (0x1<<30) //30:30 ++#define RG_USB20_REFCK_SEL_PE2H (0x1<<29) //29:29 ++#define RG_USB20_REFCK_SEL_PE1D (0x1<<28) //28:28 ++#define RG_USB20_REFCK_SEL_PE1H (0x1<<27) //27:27 ++#define RG_USB20_REFCK_SEL_U3 (0x1<<26) //26:26 ++#define RG_PCIE_REFCK_DIV4_PE2D (0x1<<25) //25:25 ++#define RG_PCIE_REFCK_DIV4_PE2H (0x1<<24) //24:24 ++#define RG_PCIE_REFCK_DIV4_PE1D (0x1<<18) //18:18 ++#define RG_PCIE_REFCK_DIV4_PE1H (0x1<<17) //17:17 ++#define RG_PCIE_REFCK_DIV4_U3 (0x1<<16) //16:16 ++#define RG_PCIE_MODE_PE2D (0x1<<8) //8:8 ++#define RG_PCIE_MODE_PE2H (0x1<<3) //3:3 ++#define RG_PCIE_MODE_PE1D (0x1<<2) //2:2 ++#define RG_PCIE_MODE_PE1H (0x1<<1) //1:1 ++#define RG_PCIE_MODE_U3 (0x1<<0) //0:0 ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D (0x7<<22) //24:22 ++#define RG_SSUSB_PLL_DIVEN_PE2H (0x7<<19) //21:19 ++#define RG_SSUSB_PLL_DIVEN_PE1D (0x7<<16) //18:16 ++#define RG_SSUSB_PLL_DIVEN_PE1H (0x7<<13) //15:13 ++#define RG_SSUSB_PLL_DIVEN_U3 (0x7<<10) //12:10 ++#define RG_SSUSB_PLL_BC_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_BC_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_PLL_BC_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_PLL_BC_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_BC_U3 (0x3<<0) //1:0 ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D (0x7<<27) //29:27 ++#define RG_SSUSB_PLL_BR_PE2H (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_BR_PE1D (0x7<<21) //23:21 ++#define RG_SSUSB_PLL_BR_PE1H (0x7<<18) //20:18 ++#define RG_SSUSB_PLL_BR_U3 (0x7<<15) //17:15 ++#define RG_SSUSB_PLL_IC_PE2D (0x7<<12) //14:12 ++#define RG_SSUSB_PLL_IC_PE2H (0x7<<9) //11:9 ++#define RG_SSUSB_PLL_IC_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_PLL_IC_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_PLL_IC_U3 (0x7<<0) //2:0 ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_IR_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_IR_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_IR_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_IR_U3 (0xf<<0) //3:0 ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D (0xf<<24) //27:24 ++#define RG_SSUSB_PLL_BP_PE2H (0xf<<16) //19:16 ++#define RG_SSUSB_PLL_BP_PE1D (0xf<<8) //11:8 ++#define RG_SSUSB_PLL_BP_PE1H (0xf<<4) //7:4 ++#define RG_SSUSB_PLL_BP_U3 (0xf<<0) //3:0 ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_FBKSEL_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_FBKSEL_PE1D (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKSEL_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_PLL_FBKSEL_U3 (0x3<<0) //1:0 ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_PLL_FBKDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_PLL_FBKDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_PLL_FBKDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D (0x3<<26) //27:26 ++#define RG_SSUSB_PLL_PREDIV_PE2H (0x3<<24) //25:24 ++#define RG_SSUSB_PLL_PREDIV_PE1D (0x3<<18) //19:18 ++#define RG_SSUSB_PLL_PREDIV_PE1H (0x3<<16) //17:16 ++#define RG_SSUSB_PLL_PREDIV_U3 (0x3<<8) //9:8 ++#define RG_SSUSB_PLL_FBKDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3 (0x7fffffff<<0) //30:0 ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H (0x7fffffff<<0) //30:0 ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D (0x7fffffff<<0) //30:0 ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_U3 (0xffff<<0) //15:0 ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D (0xffff<<0) //15:0 ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3 (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D (0xffff<<0) //15:0 ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H (0xffff<<0) //15:0 ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D (0xffff<<16) //31:16 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H (0xffff<<0) //15:0 ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_REFCKDIV_PE2H (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_REFCKDIV_PE1D (0x1<<16) //16:16 ++#define RG_SSUSB_PLL_REFCKDIV_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_PLL_REFCKDIV_U3 (0x1<<0) //0:0 ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D (0x3<<24) //25:24 ++#define RG_SSUSB_CDR_BPA_PE2H (0x3<<16) //17:16 ++#define RG_SSUSB_CDR_BPA_PE1D (0x3<<10) //11:10 ++#define RG_SSUSB_CDR_BPA_PE1H (0x3<<8) //9:8 ++#define RG_SSUSB_CDR_BPA_U3 (0x3<<0) //1:0 ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BPB_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BPB_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BPB_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BPB_U3 (0x7<<0) //2:0 ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D (0x7<<24) //26:24 ++#define RG_SSUSB_CDR_BR_PE2H (0x7<<16) //18:16 ++#define RG_SSUSB_CDR_BR_PE1D (0x7<<6) //8:6 ++#define RG_SSUSB_CDR_BR_PE1H (0x7<<3) //5:3 ++#define RG_SSUSB_CDR_BR_U3 (0x7<<0) //2:0 ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H (0x7f<<24) //30:24 ++#define RG_SSUSB_CDR_FBDIV_PE1D (0x7f<<16) //22:16 ++#define RG_SSUSB_CDR_FBDIV_PE1H (0x7f<<8) //14:8 ++#define RG_SSUSB_CDR_FBDIV_U3 (0x7f<<0) //6:0 ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D (0x3<<30) //31:30 ++#define RG_SSUSB_EQ_RSTEP1_PE2H (0x3<<28) //29:28 ++#define RG_SSUSB_EQ_RSTEP1_PE1D (0x3<<26) //27:26 ++#define RG_SSUSB_EQ_RSTEP1_PE1H (0x3<<24) //25:24 ++#define RG_SSUSB_EQ_RSTEP1_U3 (0x3<<22) //23:22 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D (0x3<<20) //21:20 ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H (0x3<<18) //19:18 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D (0x3<<16) //17:16 ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H (0x3<<14) //15:14 ++#define RG_SSUSB_LFPS_DEGLITCH_U3 (0x3<<12) //13:12 ++#define RG_SSUSB_CDR_KVSEL_PE2D (0x1<<11) //11:11 ++#define RG_SSUSB_CDR_KVSEL_PE2H (0x1<<10) //10:10 ++#define RG_SSUSB_CDR_KVSEL_PE1D (0x1<<9) //9:9 ++#define RG_SSUSB_CDR_KVSEL_PE1H (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_KVSEL_U3 (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_FBDIV_PE2D (0x7f<<0) //6:0 ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D (0x1<<26) //26:26 ++#define RG_SSUSB_RX_CMPWD_PE2H (0x1<<25) //25:25 ++#define RG_SSUSB_RX_CMPWD_PE1D (0x1<<24) //24:24 ++#define RG_SSUSB_RX_CMPWD_PE1H (0x1<<23) //23:23 ++#define RG_SSUSB_RX_CMPWD_U3 (0x1<<16) //16:16 ++#define RG_SSUSB_EQ_RSTEP2_PE2D (0x3<<8) //9:8 ++#define RG_SSUSB_EQ_RSTEP2_PE2H (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_RSTEP2_PE1D (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_RSTEP2_PE1H (0x3<<2) //3:2 ++#define RG_SSUSB_EQ_RSTEP2_U3 (0x3<<0) //1:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_reg0 ++#define RG_PCIE_SPEED_PE2D_OFST (24) ++#define RG_PCIE_SPEED_PE2H_OFST (23) ++#define RG_PCIE_SPEED_PE1D_OFST (22) ++#define RG_PCIE_SPEED_PE1H_OFST (21) ++#define RG_PCIE_SPEED_U3_OFST (20) ++#define RG_SSUSB_XTAL_EXT_EN_PE2D_OFST (18) ++#define RG_SSUSB_XTAL_EXT_EN_PE2H_OFST (16) ++#define RG_SSUSB_XTAL_EXT_EN_PE1D_OFST (14) ++#define RG_SSUSB_XTAL_EXT_EN_PE1H_OFST (12) ++#define RG_SSUSB_XTAL_EXT_EN_U3_OFST (10) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2D_OFST (8) ++#define RG_SSUSB_CDR_REFCK_SEL_PE2H_OFST (6) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1D_OFST (4) ++#define RG_SSUSB_CDR_REFCK_SEL_PE1H_OFST (2) ++#define RG_SSUSB_CDR_REFCK_SEL_U3_OFST (0) ++ ++//U3D_reg1 ++#define RG_USB20_REFCK_SEL_PE2D_OFST (30) ++#define RG_USB20_REFCK_SEL_PE2H_OFST (29) ++#define RG_USB20_REFCK_SEL_PE1D_OFST (28) ++#define RG_USB20_REFCK_SEL_PE1H_OFST (27) ++#define RG_USB20_REFCK_SEL_U3_OFST (26) ++#define RG_PCIE_REFCK_DIV4_PE2D_OFST (25) ++#define RG_PCIE_REFCK_DIV4_PE2H_OFST (24) ++#define RG_PCIE_REFCK_DIV4_PE1D_OFST (18) ++#define RG_PCIE_REFCK_DIV4_PE1H_OFST (17) ++#define RG_PCIE_REFCK_DIV4_U3_OFST (16) ++#define RG_PCIE_MODE_PE2D_OFST (8) ++#define RG_PCIE_MODE_PE2H_OFST (3) ++#define RG_PCIE_MODE_PE1D_OFST (2) ++#define RG_PCIE_MODE_PE1H_OFST (1) ++#define RG_PCIE_MODE_U3_OFST (0) ++ ++//U3D_reg4 ++#define RG_SSUSB_PLL_DIVEN_PE2D_OFST (22) ++#define RG_SSUSB_PLL_DIVEN_PE2H_OFST (19) ++#define RG_SSUSB_PLL_DIVEN_PE1D_OFST (16) ++#define RG_SSUSB_PLL_DIVEN_PE1H_OFST (13) ++#define RG_SSUSB_PLL_DIVEN_U3_OFST (10) ++#define RG_SSUSB_PLL_BC_PE2D_OFST (8) ++#define RG_SSUSB_PLL_BC_PE2H_OFST (6) ++#define RG_SSUSB_PLL_BC_PE1D_OFST (4) ++#define RG_SSUSB_PLL_BC_PE1H_OFST (2) ++#define RG_SSUSB_PLL_BC_U3_OFST (0) ++ ++//U3D_reg5 ++#define RG_SSUSB_PLL_BR_PE2D_OFST (27) ++#define RG_SSUSB_PLL_BR_PE2H_OFST (24) ++#define RG_SSUSB_PLL_BR_PE1D_OFST (21) ++#define RG_SSUSB_PLL_BR_PE1H_OFST (18) ++#define RG_SSUSB_PLL_BR_U3_OFST (15) ++#define RG_SSUSB_PLL_IC_PE2D_OFST (12) ++#define RG_SSUSB_PLL_IC_PE2H_OFST (9) ++#define RG_SSUSB_PLL_IC_PE1D_OFST (6) ++#define RG_SSUSB_PLL_IC_PE1H_OFST (3) ++#define RG_SSUSB_PLL_IC_U3_OFST (0) ++ ++//U3D_reg6 ++#define RG_SSUSB_PLL_IR_PE2D_OFST (24) ++#define RG_SSUSB_PLL_IR_PE2H_OFST (16) ++#define RG_SSUSB_PLL_IR_PE1D_OFST (8) ++#define RG_SSUSB_PLL_IR_PE1H_OFST (4) ++#define RG_SSUSB_PLL_IR_U3_OFST (0) ++ ++//U3D_reg7 ++#define RG_SSUSB_PLL_BP_PE2D_OFST (24) ++#define RG_SSUSB_PLL_BP_PE2H_OFST (16) ++#define RG_SSUSB_PLL_BP_PE1D_OFST (8) ++#define RG_SSUSB_PLL_BP_PE1H_OFST (4) ++#define RG_SSUSB_PLL_BP_U3_OFST (0) ++ ++//U3D_reg8 ++#define RG_SSUSB_PLL_FBKSEL_PE2D_OFST (24) ++#define RG_SSUSB_PLL_FBKSEL_PE2H_OFST (16) ++#define RG_SSUSB_PLL_FBKSEL_PE1D_OFST (8) ++#define RG_SSUSB_PLL_FBKSEL_PE1H_OFST (2) ++#define RG_SSUSB_PLL_FBKSEL_U3_OFST (0) ++ ++//U3D_reg9 ++#define RG_SSUSB_PLL_FBKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_FBKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_FBKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_U3_OFST (0) ++ ++//U3D_reg10 ++#define RG_SSUSB_PLL_PREDIV_PE2D_OFST (26) ++#define RG_SSUSB_PLL_PREDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_PREDIV_PE1D_OFST (18) ++#define RG_SSUSB_PLL_PREDIV_PE1H_OFST (16) ++#define RG_SSUSB_PLL_PREDIV_U3_OFST (8) ++#define RG_SSUSB_PLL_FBKDIV_PE2D_OFST (0) ++ ++//U3D_reg12 ++#define RG_SSUSB_PLL_PCW_NCPO_U3_OFST (0) ++ ++//U3D_reg13 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1H_OFST (0) ++ ++//U3D_reg14 ++#define RG_SSUSB_PLL_PCW_NCPO_PE1D_OFST (0) ++ ++//U3D_reg15 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2H_OFST (0) ++ ++//U3D_reg16 ++#define RG_SSUSB_PLL_PCW_NCPO_PE2D_OFST (0) ++ ++//U3D_reg19 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_U3_OFST (0) ++ ++//U3D_reg20 ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2H_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE1D_OFST (0) ++ ++//U3D_reg21 ++#define RG_SSUSB_PLL_SSC_DELTA_U3_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA1_PE2D_OFST (0) ++ ++//U3D_reg23 ++#define RG_SSUSB_PLL_SSC_DELTA_PE1D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE1H_OFST (0) ++ ++//U3D_reg25 ++#define RG_SSUSB_PLL_SSC_DELTA_PE2D_OFST (16) ++#define RG_SSUSB_PLL_SSC_DELTA_PE2H_OFST (0) ++ ++//U3D_reg26 ++#define RG_SSUSB_PLL_REFCKDIV_PE2D_OFST (25) ++#define RG_SSUSB_PLL_REFCKDIV_PE2H_OFST (24) ++#define RG_SSUSB_PLL_REFCKDIV_PE1D_OFST (16) ++#define RG_SSUSB_PLL_REFCKDIV_PE1H_OFST (8) ++#define RG_SSUSB_PLL_REFCKDIV_U3_OFST (0) ++ ++//U3D_reg28 ++#define RG_SSUSB_CDR_BPA_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPA_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPA_PE1D_OFST (10) ++#define RG_SSUSB_CDR_BPA_PE1H_OFST (8) ++#define RG_SSUSB_CDR_BPA_U3_OFST (0) ++ ++//U3D_reg29 ++#define RG_SSUSB_CDR_BPB_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BPB_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BPB_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BPB_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BPB_U3_OFST (0) ++ ++//U3D_reg30 ++#define RG_SSUSB_CDR_BR_PE2D_OFST (24) ++#define RG_SSUSB_CDR_BR_PE2H_OFST (16) ++#define RG_SSUSB_CDR_BR_PE1D_OFST (6) ++#define RG_SSUSB_CDR_BR_PE1H_OFST (3) ++#define RG_SSUSB_CDR_BR_U3_OFST (0) ++ ++//U3D_reg31 ++#define RG_SSUSB_CDR_FBDIV_PE2H_OFST (24) ++#define RG_SSUSB_CDR_FBDIV_PE1D_OFST (16) ++#define RG_SSUSB_CDR_FBDIV_PE1H_OFST (8) ++#define RG_SSUSB_CDR_FBDIV_U3_OFST (0) ++ ++//U3D_reg32 ++#define RG_SSUSB_EQ_RSTEP1_PE2D_OFST (30) ++#define RG_SSUSB_EQ_RSTEP1_PE2H_OFST (28) ++#define RG_SSUSB_EQ_RSTEP1_PE1D_OFST (26) ++#define RG_SSUSB_EQ_RSTEP1_PE1H_OFST (24) ++#define RG_SSUSB_EQ_RSTEP1_U3_OFST (22) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2D_OFST (20) ++#define RG_SSUSB_LFPS_DEGLITCH_PE2H_OFST (18) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1D_OFST (16) ++#define RG_SSUSB_LFPS_DEGLITCH_PE1H_OFST (14) ++#define RG_SSUSB_LFPS_DEGLITCH_U3_OFST (12) ++#define RG_SSUSB_CDR_KVSEL_PE2D_OFST (11) ++#define RG_SSUSB_CDR_KVSEL_PE2H_OFST (10) ++#define RG_SSUSB_CDR_KVSEL_PE1D_OFST (9) ++#define RG_SSUSB_CDR_KVSEL_PE1H_OFST (8) ++#define RG_SSUSB_CDR_KVSEL_U3_OFST (7) ++#define RG_SSUSB_CDR_FBDIV_PE2D_OFST (0) ++ ++//U3D_reg33 ++#define RG_SSUSB_RX_CMPWD_PE2D_OFST (26) ++#define RG_SSUSB_RX_CMPWD_PE2H_OFST (25) ++#define RG_SSUSB_RX_CMPWD_PE1D_OFST (24) ++#define RG_SSUSB_RX_CMPWD_PE1H_OFST (23) ++#define RG_SSUSB_RX_CMPWD_U3_OFST (16) ++#define RG_SSUSB_EQ_RSTEP2_PE2D_OFST (8) ++#define RG_SSUSB_EQ_RSTEP2_PE2H_OFST (6) ++#define RG_SSUSB_EQ_RSTEP2_PE1D_OFST (4) ++#define RG_SSUSB_EQ_RSTEP2_PE1H_OFST (2) ++#define RG_SSUSB_EQ_RSTEP2_U3_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_reg { ++ //0x0 ++ PHY_LE32 phyd_mix0; ++ PHY_LE32 phyd_mix1; ++ PHY_LE32 phyd_lfps0; ++ PHY_LE32 phyd_lfps1; ++ //0x10 ++ PHY_LE32 phyd_impcal0; ++ PHY_LE32 phyd_impcal1; ++ PHY_LE32 phyd_txpll0; ++ PHY_LE32 phyd_txpll1; ++ //0x20 ++ PHY_LE32 phyd_txpll2; ++ PHY_LE32 phyd_fl0; ++ PHY_LE32 phyd_mix2; ++ PHY_LE32 phyd_rx0; ++ //0x30 ++ PHY_LE32 phyd_t2rlb; ++ PHY_LE32 phyd_cppat; ++ PHY_LE32 phyd_mix3; ++ PHY_LE32 phyd_ebufctl; ++ //0x40 ++ PHY_LE32 phyd_pipe0; ++ PHY_LE32 phyd_pipe1; ++ PHY_LE32 phyd_mix4; ++ PHY_LE32 phyd_ckgen0; ++ //0x50 ++ PHY_LE32 phyd_mix5; ++ PHY_LE32 phyd_reserved; ++ PHY_LE32 phyd_cdr0; ++ PHY_LE32 phyd_cdr1; ++ //0x60 ++ PHY_LE32 phyd_pll_0; ++ PHY_LE32 phyd_pll_1; ++ PHY_LE32 phyd_bcn_det_1; ++ PHY_LE32 phyd_bcn_det_2; ++ //0x70 ++ PHY_LE32 eq0; ++ PHY_LE32 eq1; ++ PHY_LE32 eq2; ++ PHY_LE32 eq3; ++ //0x80 ++ PHY_LE32 eq_eye0; ++ PHY_LE32 eq_eye1; ++ PHY_LE32 eq_eye2; ++ PHY_LE32 eq_dfe0; ++ //0x90 ++ PHY_LE32 eq_dfe1; ++ PHY_LE32 eq_dfe2; ++ PHY_LE32 eq_dfe3; ++ PHY_LE32 reserve0; ++ //0xa0 ++ PHY_LE32 phyd_mon0; ++ PHY_LE32 phyd_mon1; ++ PHY_LE32 phyd_mon2; ++ PHY_LE32 phyd_mon3; ++ //0xb0 ++ PHY_LE32 phyd_mon4; ++ PHY_LE32 phyd_mon5; ++ PHY_LE32 phyd_mon6; ++ PHY_LE32 phyd_mon7; ++ //0xc0 ++ PHY_LE32 phya_rx_mon0; ++ PHY_LE32 phya_rx_mon1; ++ PHY_LE32 phya_rx_mon2; ++ PHY_LE32 phya_rx_mon3; ++ //0xd0 ++ PHY_LE32 phya_rx_mon4; ++ PHY_LE32 phya_rx_mon5; ++ PHY_LE32 phyd_cppat2; ++ PHY_LE32 eq_eye3; ++ //0xe0 ++ PHY_LE32 kband_out; ++ PHY_LE32 kband_out1; ++}; ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG (0x1<<31) //31:31 ++#define RG_SSUSB_TSEQ_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TSEQ_POLEN (0x1<<29) //29:29 ++#define RG_SSUSB_TSEQ_POL (0x1<<28) //28:28 ++#define RG_SSUSB_P_P3_PCLK_NG (0x1<<27) //27:27 ++#define RG_SSUSB_TSEQ_TH (0x7<<24) //26:24 ++#define RG_SSUSB_PRBS_BERTH (0xff<<16) //23:16 ++#define RG_SSUSB_DISABLE_PHY_U2_ON (0x1<<15) //15:15 ++#define RG_SSUSB_DISABLE_PHY_U2_OFF (0x1<<14) //14:14 ++#define RG_SSUSB_PRBS_EN (0x1<<13) //13:13 ++#define RG_SSUSB_BPSLOCK (0x1<<12) //12:12 ++#define RG_SSUSB_RTCOMCNT (0xf<<8) //11:8 ++#define RG_SSUSB_COMCNT (0xf<<4) //7:4 ++#define RG_SSUSB_PRBSEL_CALIB (0xf<<0) //3:0 ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PRBSEL_PCS (0x7<<28) //30:28 ++#define RG_SSUSB_TXLFPS_PRD (0xf<<24) //27:24 ++#define RG_SSUSB_P_RX_P0S_CK (0x1<<23) //23:23 ++#define RG_SSUSB_P_TX_P0S_CK (0x1<<22) //22:22 ++#define RG_SSUSB_PDNCTL (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_DRV_EN (0x1<<15) //15:15 ++#define RG_SSUSB_TX_DRV_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TX_DRV_DLY (0x3f<<8) //13:8 ++#define RG_SSUSB_BERT_EN (0x1<<7) //7:7 ++#define RG_SSUSB_SCP_TH (0x7<<4) //6:4 ++#define RG_SSUSB_SCP_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RXANSIDEC_TEST (0x7<<0) //2:0 ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_LFPS_PWD (0x1<<29) //29:29 ++#define RG_SSUSB_RXLFPS_OVF (0x1f<<24) //28:24 ++#define RG_SSUSB_P3_ENTRY_SEL (0x1<<23) //23:23 ++#define RG_SSUSB_P3_ENTRY (0x1<<22) //22:22 ++#define RG_SSUSB_RXLFPS_CDRSEL (0x3<<20) //21:20 ++#define RG_SSUSB_RXLFPS_CDRTH (0xf<<16) //19:16 ++#define RG_SSUSB_LOCK5G_BLOCK (0x1<<15) //15:15 ++#define RG_SSUSB_TFIFO_EXT_D_SEL (0x1<<14) //14:14 ++#define RG_SSUSB_TFIFO_NO_EXTEND (0x1<<13) //13:13 ++#define RG_SSUSB_RXLFPS_LOB (0x1f<<8) //12:8 ++#define RG_SSUSB_TXLFPS_EN (0x1<<7) //7:7 ++#define RG_SSUSB_TXLFPS_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RXLFPS_CDRLOCK (0x1<<5) //5:5 ++#define RG_SSUSB_RXLFPS_UPB (0x1f<<0) //4:0 ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS (0xf<<28) //31:28 ++#define RG_SSUSB_TX_IMP_BIAS (0xf<<24) //27:24 ++#define RG_SSUSB_FWAKE_TH (0x3f<<16) //21:16 ++#define RG_SSUSB_RXLFPS_UDF (0x1f<<8) //12:8 ++#define RG_SSUSB_RXLFPS_P0IDLETH (0xff<<0) //7:0 ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_TX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_TX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_TX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_TX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_TX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL (0x1<<31) //31:31 ++#define RG_SSUSB_RX_IMPCAL_EN (0x1<<30) //30:30 ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN (0x1<<29) //29:29 ++#define RG_SSUSB_RX_IMPSEL (0x1f<<24) //28:24 ++#define RG_SSUSB_RX_IMPCAL_CALCYC (0x3f<<16) //21:16 ++#define RG_SSUSB_RX_IMPCAL_STBCYC (0x1f<<10) //14:10 ++#define RG_SSUSB_RX_IMPCAL_CYCCNT (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC (0x1f<<27) //31:27 ++#define RG_SSUSB_TXPLL_ON (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_TXPLLON (0x1<<25) //25:25 ++#define RG_SSUSB_TXPLL_STBCYC (0x1ff<<16) //24:16 ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC (0xf<<12) //15:12 ++#define RG_SSUSB_TXPLL_NCPOEN_CYC (0x3<<10) //11:10 ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC (0x7<<0) //2:0 ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN (0x1<<31) //31:31 ++#define RG_SSUSB_PLL_FIFO_START_MAN (0x1<<30) //30:30 ++#define RG_SSUSB_PLL_NCPO_CHG (0x1<<28) //28:28 ++#define RG_SSUSB_PLL_DDS_RSTB (0x1<<27) //27:27 ++#define RG_SSUSB_PLL_DDS_PWDB (0x1<<26) //26:26 ++#define RG_SSUSB_PLL_DDSEN (0x1<<25) //25:25 ++#define RG_SSUSB_PLL_AUTOK_VCO (0x1<<24) //24:24 ++#define RG_SSUSB_PLL_PWD (0x1<<23) //23:23 ++#define RG_SSUSB_RX_AFE_PWD (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_TCADJ (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_CDR_TCADJ (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_PLL_NCPO_EN (0x1<<12) //12:12 ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB (0x1<<8) //8:8 ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB (0x1<<7) //7:7 ++#define RG_SSUSB_FORCE_PLL_DDSEN (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_PLL_TCADJ (0x1<<5) //5:5 ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PLL_PWD (0x1<<3) //3:3 ++#define RG_SSUSB_FLT_1_DISPERR_B (0x1<<2) //2:2 ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_TX_LFPS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_TX_LFPS (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_TX_LFPS (0x1<<28) //28:28 ++#define RG_SSUSB_RXPLL_STB (0x1<<27) //27:27 ++#define RG_SSUSB_TXPLL_STB (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_RXPLL_STB (0x1<<25) //25:25 ++#define RG_SSUSB_FORCE_TXPLL_STB (0x1<<24) //24:24 ++#define RG_SSUSB_RXPLL_REFCKSEL (0x1<<16) //16:16 ++#define RG_SSUSB_RXPLL_STBMODE (0x1<<11) //11:11 ++#define RG_SSUSB_RXPLL_ON (0x1<<10) //10:10 ++#define RG_SSUSB_FORCE_RXPLLON (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_RX_AFE_PWD (0x1<<8) //8:8 ++#define RG_SSUSB_CDR_AUTOK_VCO (0x1<<7) //7:7 ++#define RG_SSUSB_CDR_PWD (0x1<<6) //6:6 ++#define RG_SSUSB_CDR_TCADJ (0x3f<<0) //5:0 ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET (0xffff<<16) //31:16 ++#define RG_SSUSB_RX_FL_CYCLECNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST (0x1<<31) //31:31 ++#define RG_SSUSB_RX_EQ_RST_SEL (0x1<<30) //30:30 ++#define RG_SSUSB_RXVAL_RST (0x1<<29) //29:29 ++#define RG_SSUSB_RXVAL_CNT (0x1f<<24) //28:24 ++#define RG_SSUSB_CDROS_EN (0x1<<18) //18:18 ++#define RG_SSUSB_CDR_LCKOP (0x3<<16) //17:16 ++#define RG_SSUSB_RX_FL_LOCKTH (0xf<<8) //11:8 ++#define RG_SSUSB_RX_FL_OFFSET (0xff<<0) //7:0 ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH (0xff<<24) //31:24 ++#define RG_SSUSB_T2RLB_PAT (0xff<<16) //23:16 ++#define RG_SSUSB_T2RLB_EN (0x1<<15) //15:15 ++#define RG_SSUSB_T2RLB_BPSCRAMB (0x1<<14) //14:14 ++#define RG_SSUSB_T2RLB_SERIAL (0x1<<13) //13:13 ++#define RG_SSUSB_T2RLB_MODE (0x3<<11) //12:11 ++#define RG_SSUSB_RX_SAOSC_EN (0x1<<10) //10:10 ++#define RG_SSUSB_RX_SAOSC_EN_SEL (0x1<<9) //9:9 ++#define RG_SSUSB_RX_DFE_OPTION (0x1<<8) //8:8 ++#define RG_SSUSB_RX_DFE_EN (0x1<<7) //7:7 ++#define RG_SSUSB_RX_DFE_EN_SEL (0x1<<6) //6:6 ++#define RG_SSUSB_RX_EQ_EN (0x1<<5) //5:5 ++#define RG_SSUSB_RX_EQ_EN_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_RX_SAOSC_RST (0x1<<3) //3:3 ++#define RG_SSUSB_RX_SAOSC_RST_SEL (0x1<<2) //2:2 ++#define RG_SSUSB_RX_DFE_RST (0x1<<1) //1:1 ++#define RG_SSUSB_RX_DFE_RST_SEL (0x1<<0) //0:0 ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE (0x1<<28) //28:28 ++#define RG_SSUSB_PRB_OUT_CPPAT (0x1<<27) //27:27 ++#define RG_SSUSB_BPANSIENC (0x1<<26) //26:26 ++#define RG_SSUSB_VALID_EN (0x1<<25) //25:25 ++#define RG_SSUSB_EBUF_SRST (0x1<<24) //24:24 ++#define RG_SSUSB_K_EMP (0xf<<20) //23:20 ++#define RG_SSUSB_K_FUL (0xf<<16) //19:16 ++#define RG_SSUSB_T2RLB_BDATRST (0xf<<12) //15:12 ++#define RG_SSUSB_P_T2RLB_SKP_EN (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PATMODE (0x3<<8) //9:8 ++#define RG_SSUSB_T2RLB_TSEQCNT (0xff<<0) //7:0 ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN (0x1<<24) //24:24 ++#define RG_SSUSB_CPPAT_TOZ (0x3<<21) //22:21 ++#define RG_SSUSB_CPPAT_PRBS_EN (0x1<<20) //20:20 ++#define RG_SSUSB_CPPAT_OUT_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_TMP0 (0xff<<0) //7:0 ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS (0x1<<31) //31:31 ++#define RG_SSUSB_P_CDROS_EN (0x1<<30) //30:30 ++#define RG_SSUSB_P_P2_TX_DRV_DIS (0x1<<28) //28:28 ++#define RG_SSUSB_CDR_TCADJ_OFFSET (0x7<<24) //26:24 ++#define RG_SSUSB_PLL_TCADJ_MINUS (0x1<<23) //23:23 ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN (0x1<<20) //20:20 ++#define RG_SSUSB_PLL_BIAS_LPF_EN (0x1<<19) //19:19 ++#define RG_SSUSB_PLL_TCADJ_OFFSET (0x7<<16) //18:16 ++#define RG_SSUSB_FORCE_PLL_SSCEN (0x1<<15) //15:15 ++#define RG_SSUSB_PLL_SSCEN (0x1<<14) //14:14 ++#define RG_SSUSB_FORCE_CDR_PI_PWD (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_PI_PWD (0x1<<12) //12:12 ++#define RG_SSUSB_CDR_PI_MODE (0x1<<11) //11:11 ++#define RG_SSUSB_TXPLL_SSCEN_CYC (0x3ff<<0) //9:0 ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION (0x1<<30) //30:30 ++#define RG_SSUSB_RXEQTRAINING (0x1<<29) //29:29 ++#define RG_SSUSB_RXPOLARITY (0x1<<28) //28:28 ++#define RG_SSUSB_TXDEEMPH (0x3<<26) //27:26 ++#define RG_SSUSB_POWERDOWN (0x3<<24) //25:24 ++#define RG_SSUSB_TXONESZEROS (0x1<<23) //23:23 ++#define RG_SSUSB_TXELECIDLE (0x1<<22) //22:22 ++#define RG_SSUSB_TXDETECTRX (0x1<<21) //21:21 ++#define RG_SSUSB_PIPE_SEL (0x1<<20) //20:20 ++#define RG_SSUSB_TXDATAK (0xf<<16) //19:16 ++#define RG_SSUSB_CDR_STABLE_SEL (0x1<<15) //15:15 ++#define RG_SSUSB_CDR_STABLE (0x1<<14) //14:14 ++#define RG_SSUSB_CDR_RSTB_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_CDR_RSTB (0x1<<12) //12:12 ++#define RG_SSUSB_P_ERROR_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_TXMARGIN (0x7<<1) //3:1 ++#define RG_SSUSB_TXCOMPLIANCE (0x1<<0) //0:0 ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT (0x3f<<24) //29:24 ++#define RG_SSUSB_T2RLB_BER_EN (0x1<<16) //16:16 ++#define RG_SSUSB_T2RLB_BER_RATE (0xffff<<0) //15:0 ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT (0x1<<27) //27:27 ++#define RG_SSUSB_TFIFO_PSEL (0x7<<24) //26:24 ++#define RG_SSUSB_CKGEN_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_RXCK_INV (0x1<<0) //0:0 ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL (0xffff<<16) //31:16 ++#define RG_SSUSB_RXPLL_STBCYC (0x7ff<<0) //10:0 ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE (0xffffffff<<0) //31:0 ++//#define RG_SSUSB_RX_SIGDET_SEL (0x1<<11) ++//#define RG_SSUSB_RX_SIGDET_EN (0x1<<12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL (0x1<<9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN (0x1<<10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_CDR_BW_SEL (0x3<<6) //7:6 ++#define RG_SSUSB_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G (0x1<<28) //28:28 ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G (0x1<<27) //27:27 ++#define RG_SSUSB_FORCE_PLL_BAND_5G (0x1<<26) //26:26 ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G (0x1<<25) //25:25 ++#define RG_SSUSB_P_EQ_T_SEL (0x3ff<<15) //24:15 ++#define RG_SSUSB_PLL_ISO_EN_CYC (0x3ff<<5) //14:5 ++#define RG_SSUSB_PLLBAND_RECAL (0x1<<4) //4:4 ++#define RG_SSUSB_PLL_DDS_ISO_EN (0x1<<3) //3:3 ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN (0x1<<2) //2:2 ++#define RG_SSUSB_PLL_DDS_PWR_ON (0x1<<1) //1:1 ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON (0x1<<0) //0:0 ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RG_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RG_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RG_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD (0xffff<<16) //31:16 ++#define RG_SSUSB_U_BCN_OBS_PRD (0xffff<<0) //15:0 ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL (0xfff<<16) //27:16 ++#define RG_SSUSB_BCN_DET_DIS (0x1<<12) //12:12 ++#define RG_SSUSB_U_BCN_OBS_SEL (0xfff<<0) //11:0 ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHL_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DD0HOS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DD0LOS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DD1LOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DE0OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_DE1OS_LFI (0x7f<<0) //6:0 ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_DHHLOS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_STOPTIME (0x1<<14) //14:14 ++#define RG_SSUSB_EQ_DHHL_LF_SEL (0x7<<11) //13:11 ++#define RG_SSUSB_EQ_DSAOS_LF_SEL (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_STARTTIME (0x3<<6) //7:6 ++#define RG_SSUSB_EQ_DLEQ_LF_SEL (0x7<<3) //5:3 ++#define RG_SSUSB_EQ_DLHL_LF_SEL (0x7<<0) //2:0 ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2 (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1 (0xf<<24) //27:24 ++#define RG_SSUSB_EQ_DEYE0OS_LFI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_DEYE1OS_LFI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_TRI_DET_EN (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_TRI_DET_TH (0x7f<<0) //6:0 ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET (0x7f<<25) //31:25 ++#define RG_SSUSB_EQ_EYE_MON_EN (0x1<<24) //24:24 ++#define RG_SSUSB_EQ_EYE0_Y (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_EYE1_Y (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PILPO_ROUT (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_PI_KPGAIN (0x7<<4) //6:4 ++#define RG_SSUSB_EQ_EYE_CNT_EN (0x1<<3) //3:3 ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET (0x7f<<24) //30:24 ++#define RG_SSUSB_EQ_EYE_MASK (0x3ff<<7) //16:7 ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_EQ_SD_CNT1 (0x3f<<24) //29:24 ++#define RG_SSUSB_EQ_ISIFLAG_SEL (0x3<<22) //23:22 ++#define RG_SSUSB_EQ_SD_CNT0 (0x3f<<16) //21:16 ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX (0xf<<28) //31:28 ++#define RG_SSUSB_EQ_DFEX_EN (0x1<<27) //27:27 ++#define RG_SSUSB_EQ_DFEX_LF_SEL (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_CHK_EYE_H (0x1<<23) //23:23 ++#define RG_SSUSB_EQ_PIEYE_INI (0x7f<<16) //22:16 ++#define RG_SSUSB_EQ_PI90_INI (0x7f<<8) //14:8 ++#define RG_SSUSB_EQ_PI0_INI (0x7f<<0) //6:0 ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV (0xffff<<16) //31:16 ++#define RG_SSUSB_EQ_DFEYEN_DUR (0x7<<12) //14:12 ++#define RG_SSUSB_EQ_DFEXEN_DUR (0x7<<8) //10:8 ++#define RG_SSUSB_EQ_DFEX_RST (0x1<<7) //7:7 ++#define RG_SSUSB_EQ_GATED_RXD_B (0x1<<6) //6:6 ++#define RG_SSUSB_EQ_PI90CK_SEL (0x3<<4) //5:4 ++#define RG_SSUSB_EQ_DFEX_DIS (0x1<<2) //2:2 ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_EQ_DFEXEN_SEL (0x1<<0) //0:0 ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL (0x1f<<24) //28:24 ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT (0x7<<16) //18:16 ++#define RG_SSUSB_EQ_DLEQOS_LFI (0x1f<<8) //12:8 ++#define RG_SSUSB_EQ_LEQ_STOP_TO (0x3<<0) //1:0 ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC (0xffff<<16) //31:16 ++#define RGS_SSUSB_LFPS (0xf<<12) //15:12 ++#define RGS_SSUSB_TRAINDEC (0x7<<8) //10:8 ++#define RGS_SSUSB_SCP_PAT (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RETRACK (0xf<<12) //15:12 ++#define RGS_SSUSB_RXPLL_LOCK (0x1<<10) //10:10 ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D (0x1<<9) //9:9 ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D (0x1<<8) //8:8 ++#define RGS_SSUSB_PDNCTL (0xff<<0) //7:0 ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_PRBS_ERRCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT (0xf<<24) //27:24 ++#define RGS_SSUSB_SCP_DETCNT (0xff<<16) //23:16 ++#define RGS_SSUSB_TSEQ_DETCNT (0xffff<<0) //15:0 ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG (0xffff<<16) //31:16 ++#define RGS_SSUSB_BERT_LOCK (0x1<<15) //15:15 ++#define RGS_SSUSB_SCP_DET (0x1<<14) //14:14 ++#define RGS_SSUSB_TSEQ_DET (0x1<<13) //13:13 ++#define RGS_SSUSB_EBUF_UDF (0x1<<12) //12:12 ++#define RGS_SSUSB_EBUF_OVF (0x1<<11) //11:11 ++#define RGS_SSUSB_PRBS_PASSTH (0x1<<10) //10:10 ++#define RGS_SSUSB_PRBS_PASS (0x1<<9) //9:9 ++#define RGS_SSUSB_PRBS_LOCK (0x1<<8) //8:8 ++#define RGS_SSUSB_T2RLB_ERR (0x1<<6) //6:6 ++#define RGS_SSUSB_T2RLB_PASSTH (0x1<<5) //5:5 ++#define RGS_SSUSB_T2RLB_PASS (0x1<<4) //4:4 ++#define RGS_SSUSB_T2RLB_LOCK (0x1<<3) //3:3 ++#define RGS_SSUSB_RX_IMPCAL_DONE (0x1<<2) //2:2 ++#define RGS_SSUSB_TX_IMPCAL_DONE (0x1<<1) //1:1 ++#define RGS_SSUSB_RXDETECTED (0x1<<0) //0:0 ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE (0x1<<30) //30:30 ++#define RGS_SSUSB_SIGCAL_CAL_OUT (0x1<<29) //29:29 ++#define RGS_SSUSB_SIGCAL_OFFSET (0x1f<<24) //28:24 ++#define RGS_SSUSB_RX_IMP_SEL (0x1f<<16) //20:16 ++#define RGS_SSUSB_TX_IMP_SEL (0x1f<<8) //12:8 ++#define RGS_SSUSB_TFIFO_MSG (0xf<<4) //7:4 ++#define RGS_SSUSB_RFIFO_MSG (0xf<<0) //3:0 ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT (0xff<<8) //15:8 ++#define RGS_SSUSB_PRB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ (0xf<<24) //27:24 ++#define RGS_SSUSB_EQ_DCD0H (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCD0L (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCD1H (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_DCE0 (0x7f<<16) //22:16 ++#define RGS_SSUSB_EQ_DCE1 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCHHL (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP (0x1<<31) //31:31 ++#define RGS_SSUSB_EQ_DCLHL (0x7f<<24) //30:24 ++#define RGS_SSUSB_EQ_STATUS (0xff<<16) //23:16 ++#define RGS_SSUSB_EQ_DCEYE0 (0x7f<<8) //14:8 ++#define RGS_SSUSB_EQ_DCEYE1 (0x7f<<0) //6:0 ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1 (0xfffff<<0) //19:0 ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS (0x1f<<8) //12:8 ++#define RGS_SSUSB_EQ_EYE_CNT_RDY (0x1<<7) //7:7 ++#define RGS_SSUSB_EQ_PILPO (0x7f<<0) //6:0 ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2 (0xf<<16) //19:16 ++#define RG_SSUSB_CPPAT_OUT_H_TMP1 (0xff<<8) //15:8 ++#define RG_SSUSB_CPPAT_OUT_H_TMP0 (0xff<<0) //7:0 ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT (0x7<<24) //26:24 ++#define RG_SSUSB_EQ_EYE_CNT (0xfffff<<0) //19:0 ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G (0xff<<24) //31:24 ++#define RGS_SSUSB_CDR_BAND_2P5G (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_BAND_5G (0xff<<8) //15:8 ++#define RGS_SSUSB_PLL_BAND_2P5G (0xff<<0) //7:0 ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL (0x1<<24) //24:24 ++#define RGS_SSUSB_CDR_VCOCAL_STATE (0xff<<16) //23:16 ++#define RGS_SSUSB_PLL_VCOCAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_PLL_VCOCAL_STATE (0xff<<0) //7:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_PHYD_MIX0 ++#define RG_SSUSB_P_P3_TX_NG_OFST (31) ++#define RG_SSUSB_TSEQ_EN_OFST (30) ++#define RG_SSUSB_TSEQ_POLEN_OFST (29) ++#define RG_SSUSB_TSEQ_POL_OFST (28) ++#define RG_SSUSB_P_P3_PCLK_NG_OFST (27) ++#define RG_SSUSB_TSEQ_TH_OFST (24) ++#define RG_SSUSB_PRBS_BERTH_OFST (16) ++#define RG_SSUSB_DISABLE_PHY_U2_ON_OFST (15) ++#define RG_SSUSB_DISABLE_PHY_U2_OFF_OFST (14) ++#define RG_SSUSB_PRBS_EN_OFST (13) ++#define RG_SSUSB_BPSLOCK_OFST (12) ++#define RG_SSUSB_RTCOMCNT_OFST (8) ++#define RG_SSUSB_COMCNT_OFST (4) ++#define RG_SSUSB_PRBSEL_CALIB_OFST (0) ++ ++//U3D_PHYD_MIX1 ++#define RG_SSUSB_SLEEP_EN_OFST (31) ++#define RG_SSUSB_PRBSEL_PCS_OFST (28) ++#define RG_SSUSB_TXLFPS_PRD_OFST (24) ++#define RG_SSUSB_P_RX_P0S_CK_OFST (23) ++#define RG_SSUSB_P_TX_P0S_CK_OFST (22) ++#define RG_SSUSB_PDNCTL_OFST (16) ++#define RG_SSUSB_TX_DRV_EN_OFST (15) ++#define RG_SSUSB_TX_DRV_SEL_OFST (14) ++#define RG_SSUSB_TX_DRV_DLY_OFST (8) ++#define RG_SSUSB_BERT_EN_OFST (7) ++#define RG_SSUSB_SCP_TH_OFST (4) ++#define RG_SSUSB_SCP_EN_OFST (3) ++#define RG_SSUSB_RXANSIDEC_TEST_OFST (0) ++ ++//U3D_PHYD_LFPS0 ++#define RG_SSUSB_LFPS_PWD_OFST (30) ++#define RG_SSUSB_FORCE_LFPS_PWD_OFST (29) ++#define RG_SSUSB_RXLFPS_OVF_OFST (24) ++#define RG_SSUSB_P3_ENTRY_SEL_OFST (23) ++#define RG_SSUSB_P3_ENTRY_OFST (22) ++#define RG_SSUSB_RXLFPS_CDRSEL_OFST (20) ++#define RG_SSUSB_RXLFPS_CDRTH_OFST (16) ++#define RG_SSUSB_LOCK5G_BLOCK_OFST (15) ++#define RG_SSUSB_TFIFO_EXT_D_SEL_OFST (14) ++#define RG_SSUSB_TFIFO_NO_EXTEND_OFST (13) ++#define RG_SSUSB_RXLFPS_LOB_OFST (8) ++#define RG_SSUSB_TXLFPS_EN_OFST (7) ++#define RG_SSUSB_TXLFPS_SEL_OFST (6) ++#define RG_SSUSB_RXLFPS_CDRLOCK_OFST (5) ++#define RG_SSUSB_RXLFPS_UPB_OFST (0) ++ ++//U3D_PHYD_LFPS1 ++#define RG_SSUSB_RX_IMP_BIAS_OFST (28) ++#define RG_SSUSB_TX_IMP_BIAS_OFST (24) ++#define RG_SSUSB_FWAKE_TH_OFST (16) ++#define RG_SSUSB_RXLFPS_UDF_OFST (8) ++#define RG_SSUSB_RXLFPS_P0IDLETH_OFST (0) ++ ++//U3D_PHYD_IMPCAL0 ++#define RG_SSUSB_FORCE_TX_IMPSEL_OFST (31) ++#define RG_SSUSB_TX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_TX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_TX_IMPSEL_OFST (24) ++#define RG_SSUSB_TX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_TX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_TX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_IMPCAL1 ++#define RG_SSUSB_FORCE_RX_IMPSEL_OFST (31) ++#define RG_SSUSB_RX_IMPCAL_EN_OFST (30) ++#define RG_SSUSB_FORCE_RX_IMPCAL_EN_OFST (29) ++#define RG_SSUSB_RX_IMPSEL_OFST (24) ++#define RG_SSUSB_RX_IMPCAL_CALCYC_OFST (16) ++#define RG_SSUSB_RX_IMPCAL_STBCYC_OFST (10) ++#define RG_SSUSB_RX_IMPCAL_CYCCNT_OFST (0) ++ ++//U3D_PHYD_TXPLL0 ++#define RG_SSUSB_TXPLL_DDSEN_CYC_OFST (27) ++#define RG_SSUSB_TXPLL_ON_OFST (26) ++#define RG_SSUSB_FORCE_TXPLLON_OFST (25) ++#define RG_SSUSB_TXPLL_STBCYC_OFST (16) ++#define RG_SSUSB_TXPLL_NCPOCHG_CYC_OFST (12) ++#define RG_SSUSB_TXPLL_NCPOEN_CYC_OFST (10) ++#define RG_SSUSB_TXPLL_DDSRSTB_CYC_OFST (0) ++ ++//U3D_PHYD_TXPLL1 ++#define RG_SSUSB_PLL_NCPO_EN_OFST (31) ++#define RG_SSUSB_PLL_FIFO_START_MAN_OFST (30) ++#define RG_SSUSB_PLL_NCPO_CHG_OFST (28) ++#define RG_SSUSB_PLL_DDS_RSTB_OFST (27) ++#define RG_SSUSB_PLL_DDS_PWDB_OFST (26) ++#define RG_SSUSB_PLL_DDSEN_OFST (25) ++#define RG_SSUSB_PLL_AUTOK_VCO_OFST (24) ++#define RG_SSUSB_PLL_PWD_OFST (23) ++#define RG_SSUSB_RX_AFE_PWD_OFST (22) ++#define RG_SSUSB_PLL_TCADJ_OFST (16) ++#define RG_SSUSB_FORCE_CDR_TCADJ_OFST (15) ++#define RG_SSUSB_FORCE_CDR_AUTOK_VCO_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PWD_OFST (13) ++#define RG_SSUSB_FORCE_PLL_NCPO_EN_OFST (12) ++#define RG_SSUSB_FORCE_PLL_FIFO_START_MAN_OFST (11) ++#define RG_SSUSB_FORCE_PLL_NCPO_CHG_OFST (9) ++#define RG_SSUSB_FORCE_PLL_DDS_RSTB_OFST (8) ++#define RG_SSUSB_FORCE_PLL_DDS_PWDB_OFST (7) ++#define RG_SSUSB_FORCE_PLL_DDSEN_OFST (6) ++#define RG_SSUSB_FORCE_PLL_TCADJ_OFST (5) ++#define RG_SSUSB_FORCE_PLL_AUTOK_VCO_OFST (4) ++#define RG_SSUSB_FORCE_PLL_PWD_OFST (3) ++#define RG_SSUSB_FLT_1_DISPERR_B_OFST (2) ++ ++//U3D_PHYD_TXPLL2 ++#define RG_SSUSB_TX_LFPS_EN_OFST (31) ++#define RG_SSUSB_FORCE_TX_LFPS_EN_OFST (30) ++#define RG_SSUSB_TX_LFPS_OFST (29) ++#define RG_SSUSB_FORCE_TX_LFPS_OFST (28) ++#define RG_SSUSB_RXPLL_STB_OFST (27) ++#define RG_SSUSB_TXPLL_STB_OFST (26) ++#define RG_SSUSB_FORCE_RXPLL_STB_OFST (25) ++#define RG_SSUSB_FORCE_TXPLL_STB_OFST (24) ++#define RG_SSUSB_RXPLL_REFCKSEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBMODE_OFST (11) ++#define RG_SSUSB_RXPLL_ON_OFST (10) ++#define RG_SSUSB_FORCE_RXPLLON_OFST (9) ++#define RG_SSUSB_FORCE_RX_AFE_PWD_OFST (8) ++#define RG_SSUSB_CDR_AUTOK_VCO_OFST (7) ++#define RG_SSUSB_CDR_PWD_OFST (6) ++#define RG_SSUSB_CDR_TCADJ_OFST (0) ++ ++//U3D_PHYD_FL0 ++#define RG_SSUSB_RX_FL_TARGET_OFST (16) ++#define RG_SSUSB_RX_FL_CYCLECNT_OFST (0) ++ ++//U3D_PHYD_MIX2 ++#define RG_SSUSB_RX_EQ_RST_OFST (31) ++#define RG_SSUSB_RX_EQ_RST_SEL_OFST (30) ++#define RG_SSUSB_RXVAL_RST_OFST (29) ++#define RG_SSUSB_RXVAL_CNT_OFST (24) ++#define RG_SSUSB_CDROS_EN_OFST (18) ++#define RG_SSUSB_CDR_LCKOP_OFST (16) ++#define RG_SSUSB_RX_FL_LOCKTH_OFST (8) ++#define RG_SSUSB_RX_FL_OFFSET_OFST (0) ++ ++//U3D_PHYD_RX0 ++#define RG_SSUSB_T2RLB_BERTH_OFST (24) ++#define RG_SSUSB_T2RLB_PAT_OFST (16) ++#define RG_SSUSB_T2RLB_EN_OFST (15) ++#define RG_SSUSB_T2RLB_BPSCRAMB_OFST (14) ++#define RG_SSUSB_T2RLB_SERIAL_OFST (13) ++#define RG_SSUSB_T2RLB_MODE_OFST (11) ++#define RG_SSUSB_RX_SAOSC_EN_OFST (10) ++#define RG_SSUSB_RX_SAOSC_EN_SEL_OFST (9) ++#define RG_SSUSB_RX_DFE_OPTION_OFST (8) ++#define RG_SSUSB_RX_DFE_EN_OFST (7) ++#define RG_SSUSB_RX_DFE_EN_SEL_OFST (6) ++#define RG_SSUSB_RX_EQ_EN_OFST (5) ++#define RG_SSUSB_RX_EQ_EN_SEL_OFST (4) ++#define RG_SSUSB_RX_SAOSC_RST_OFST (3) ++#define RG_SSUSB_RX_SAOSC_RST_SEL_OFST (2) ++#define RG_SSUSB_RX_DFE_RST_OFST (1) ++#define RG_SSUSB_RX_DFE_RST_SEL_OFST (0) ++ ++//U3D_PHYD_T2RLB ++#define RG_SSUSB_EQTRAIN_CH_MODE_OFST (28) ++#define RG_SSUSB_PRB_OUT_CPPAT_OFST (27) ++#define RG_SSUSB_BPANSIENC_OFST (26) ++#define RG_SSUSB_VALID_EN_OFST (25) ++#define RG_SSUSB_EBUF_SRST_OFST (24) ++#define RG_SSUSB_K_EMP_OFST (20) ++#define RG_SSUSB_K_FUL_OFST (16) ++#define RG_SSUSB_T2RLB_BDATRST_OFST (12) ++#define RG_SSUSB_P_T2RLB_SKP_EN_OFST (10) ++#define RG_SSUSB_T2RLB_PATMODE_OFST (8) ++#define RG_SSUSB_T2RLB_TSEQCNT_OFST (0) ++ ++//U3D_PHYD_CPPAT ++#define RG_SSUSB_CPPAT_PROGRAM_EN_OFST (24) ++#define RG_SSUSB_CPPAT_TOZ_OFST (21) ++#define RG_SSUSB_CPPAT_PRBS_EN_OFST (20) ++#define RG_SSUSB_CPPAT_OUT_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_TMP0_OFST (0) ++ ++//U3D_PHYD_MIX3 ++#define RG_SSUSB_CDR_TCADJ_MINUS_OFST (31) ++#define RG_SSUSB_P_CDROS_EN_OFST (30) ++#define RG_SSUSB_P_P2_TX_DRV_DIS_OFST (28) ++#define RG_SSUSB_CDR_TCADJ_OFFSET_OFST (24) ++#define RG_SSUSB_PLL_TCADJ_MINUS_OFST (23) ++#define RG_SSUSB_FORCE_PLL_BIAS_LPF_EN_OFST (20) ++#define RG_SSUSB_PLL_BIAS_LPF_EN_OFST (19) ++#define RG_SSUSB_PLL_TCADJ_OFFSET_OFST (16) ++#define RG_SSUSB_FORCE_PLL_SSCEN_OFST (15) ++#define RG_SSUSB_PLL_SSCEN_OFST (14) ++#define RG_SSUSB_FORCE_CDR_PI_PWD_OFST (13) ++#define RG_SSUSB_CDR_PI_PWD_OFST (12) ++#define RG_SSUSB_CDR_PI_MODE_OFST (11) ++#define RG_SSUSB_TXPLL_SSCEN_CYC_OFST (0) ++ ++//U3D_PHYD_EBUFCTL ++#define RG_SSUSB_EBUFCTL_OFST (0) ++ ++//U3D_PHYD_PIPE0 ++#define RG_SSUSB_RXTERMINATION_OFST (30) ++#define RG_SSUSB_RXEQTRAINING_OFST (29) ++#define RG_SSUSB_RXPOLARITY_OFST (28) ++#define RG_SSUSB_TXDEEMPH_OFST (26) ++#define RG_SSUSB_POWERDOWN_OFST (24) ++#define RG_SSUSB_TXONESZEROS_OFST (23) ++#define RG_SSUSB_TXELECIDLE_OFST (22) ++#define RG_SSUSB_TXDETECTRX_OFST (21) ++#define RG_SSUSB_PIPE_SEL_OFST (20) ++#define RG_SSUSB_TXDATAK_OFST (16) ++#define RG_SSUSB_CDR_STABLE_SEL_OFST (15) ++#define RG_SSUSB_CDR_STABLE_OFST (14) ++#define RG_SSUSB_CDR_RSTB_SEL_OFST (13) ++#define RG_SSUSB_CDR_RSTB_OFST (12) ++#define RG_SSUSB_P_ERROR_SEL_OFST (4) ++#define RG_SSUSB_TXMARGIN_OFST (1) ++#define RG_SSUSB_TXCOMPLIANCE_OFST (0) ++ ++//U3D_PHYD_PIPE1 ++#define RG_SSUSB_TXDATA_OFST (0) ++ ++//U3D_PHYD_MIX4 ++#define RG_SSUSB_CDROS_CNT_OFST (24) ++#define RG_SSUSB_T2RLB_BER_EN_OFST (16) ++#define RG_SSUSB_T2RLB_BER_RATE_OFST (0) ++ ++//U3D_PHYD_CKGEN0 ++#define RG_SSUSB_RFIFO_IMPLAT_OFST (27) ++#define RG_SSUSB_TFIFO_PSEL_OFST (24) ++#define RG_SSUSB_CKGEN_PSEL_OFST (8) ++#define RG_SSUSB_RXCK_INV_OFST (0) ++ ++//U3D_PHYD_MIX5 ++#define RG_SSUSB_PRB_SEL_OFST (16) ++#define RG_SSUSB_RXPLL_STBCYC_OFST (0) ++ ++//U3D_PHYD_RESERVED ++#define RG_SSUSB_PHYD_RESERVE_OFST (0) ++//#define RG_SSUSB_RX_SIGDET_SEL_OFST (11) ++//#define RG_SSUSB_RX_SIGDET_EN_OFST (12) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_SEL_OFST (9) ++//#define RG_SSUSB_RX_PI_CAL_MANUAL_EN_OFST (10) ++ ++//U3D_PHYD_CDR0 ++#define RG_SSUSB_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_CDR_BC_LTD0_OFST (0) ++ ++//U3D_PHYD_CDR1 ++#define RG_SSUSB_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_CDR_BW_SEL_OFST (6) ++#define RG_SSUSB_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_PHYD_PLL_0 ++#define RG_SSUSB_FORCE_CDR_BAND_5G_OFST (28) ++#define RG_SSUSB_FORCE_CDR_BAND_2P5G_OFST (27) ++#define RG_SSUSB_FORCE_PLL_BAND_5G_OFST (26) ++#define RG_SSUSB_FORCE_PLL_BAND_2P5G_OFST (25) ++#define RG_SSUSB_P_EQ_T_SEL_OFST (15) ++#define RG_SSUSB_PLL_ISO_EN_CYC_OFST (5) ++#define RG_SSUSB_PLLBAND_RECAL_OFST (4) ++#define RG_SSUSB_PLL_DDS_ISO_EN_OFST (3) ++#define RG_SSUSB_FORCE_PLL_DDS_ISO_EN_OFST (2) ++#define RG_SSUSB_PLL_DDS_PWR_ON_OFST (1) ++#define RG_SSUSB_FORCE_PLL_DDS_PWR_ON_OFST (0) ++ ++//U3D_PHYD_PLL_1 ++#define RG_SSUSB_CDR_BAND_5G_OFST (24) ++#define RG_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RG_SSUSB_PLL_BAND_5G_OFST (8) ++#define RG_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_PHYD_BCN_DET_1 ++#define RG_SSUSB_P_BCN_OBS_PRD_OFST (16) ++#define RG_SSUSB_U_BCN_OBS_PRD_OFST (0) ++ ++//U3D_PHYD_BCN_DET_2 ++#define RG_SSUSB_P_BCN_OBS_SEL_OFST (16) ++#define RG_SSUSB_BCN_DET_DIS_OFST (12) ++#define RG_SSUSB_U_BCN_OBS_SEL_OFST (0) ++ ++//U3D_EQ0 ++#define RG_SSUSB_EQ_DLHL_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHL_LFI_OFST (16) ++#define RG_SSUSB_EQ_DD0HOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DD0LOS_LFI_OFST (0) ++ ++//U3D_EQ1 ++#define RG_SSUSB_EQ_DD1HOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DD1LOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DE0OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_DE1OS_LFI_OFST (0) ++ ++//U3D_EQ2 ++#define RG_SSUSB_EQ_DLHLOS_LFI_OFST (24) ++#define RG_SSUSB_EQ_DHHLOS_LFI_OFST (16) ++#define RG_SSUSB_EQ_STOPTIME_OFST (14) ++#define RG_SSUSB_EQ_DHHL_LF_SEL_OFST (11) ++#define RG_SSUSB_EQ_DSAOS_LF_SEL_OFST (8) ++#define RG_SSUSB_EQ_STARTTIME_OFST (6) ++#define RG_SSUSB_EQ_DLEQ_LF_SEL_OFST (3) ++#define RG_SSUSB_EQ_DLHL_LF_SEL_OFST (0) ++ ++//U3D_EQ3 ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN2_OFST (28) ++#define RG_SSUSB_EQ_DLEQ_LFI_GEN1_OFST (24) ++#define RG_SSUSB_EQ_DEYE0OS_LFI_OFST (16) ++#define RG_SSUSB_EQ_DEYE1OS_LFI_OFST (8) ++#define RG_SSUSB_EQ_TRI_DET_EN_OFST (7) ++#define RG_SSUSB_EQ_TRI_DET_TH_OFST (0) ++ ++//U3D_EQ_EYE0 ++#define RG_SSUSB_EQ_EYE_XOFFSET_OFST (25) ++#define RG_SSUSB_EQ_EYE_MON_EN_OFST (24) ++#define RG_SSUSB_EQ_EYE0_Y_OFST (16) ++#define RG_SSUSB_EQ_EYE1_Y_OFST (8) ++#define RG_SSUSB_EQ_PILPO_ROUT_OFST (7) ++#define RG_SSUSB_EQ_PI_KPGAIN_OFST (4) ++#define RG_SSUSB_EQ_EYE_CNT_EN_OFST (3) ++ ++//U3D_EQ_EYE1 ++#define RG_SSUSB_EQ_SIGDET_OFST (24) ++#define RG_SSUSB_EQ_EYE_MASK_OFST (7) ++ ++//U3D_EQ_EYE2 ++#define RG_SSUSB_EQ_RX500M_CK_SEL_OFST (31) ++#define RG_SSUSB_EQ_SD_CNT1_OFST (24) ++#define RG_SSUSB_EQ_ISIFLAG_SEL_OFST (22) ++#define RG_SSUSB_EQ_SD_CNT0_OFST (16) ++ ++//U3D_EQ_DFE0 ++#define RG_SSUSB_EQ_LEQMAX_OFST (28) ++#define RG_SSUSB_EQ_DFEX_EN_OFST (27) ++#define RG_SSUSB_EQ_DFEX_LF_SEL_OFST (24) ++#define RG_SSUSB_EQ_CHK_EYE_H_OFST (23) ++#define RG_SSUSB_EQ_PIEYE_INI_OFST (16) ++#define RG_SSUSB_EQ_PI90_INI_OFST (8) ++#define RG_SSUSB_EQ_PI0_INI_OFST (0) ++ ++//U3D_EQ_DFE1 ++#define RG_SSUSB_EQ_REV_OFST (16) ++#define RG_SSUSB_EQ_DFEYEN_DUR_OFST (12) ++#define RG_SSUSB_EQ_DFEXEN_DUR_OFST (8) ++#define RG_SSUSB_EQ_DFEX_RST_OFST (7) ++#define RG_SSUSB_EQ_GATED_RXD_B_OFST (6) ++#define RG_SSUSB_EQ_PI90CK_SEL_OFST (4) ++#define RG_SSUSB_EQ_DFEX_DIS_OFST (2) ++#define RG_SSUSB_EQ_DFEYEN_STOP_DIS_OFST (1) ++#define RG_SSUSB_EQ_DFEXEN_SEL_OFST (0) ++ ++//U3D_EQ_DFE2 ++#define RG_SSUSB_EQ_MON_SEL_OFST (24) ++#define RG_SSUSB_EQ_LEQOSC_DLYCNT_OFST (16) ++#define RG_SSUSB_EQ_DLEQOS_LFI_OFST (8) ++#define RG_SSUSB_EQ_LEQ_STOP_TO_OFST (0) ++ ++//U3D_EQ_DFE3 ++#define RG_SSUSB_EQ_RESERVED_OFST (0) ++ ++//U3D_PHYD_MON0 ++#define RGS_SSUSB_BERT_BERC_OFST (16) ++#define RGS_SSUSB_LFPS_OFST (12) ++#define RGS_SSUSB_TRAINDEC_OFST (8) ++#define RGS_SSUSB_SCP_PAT_OFST (0) ++ ++//U3D_PHYD_MON1 ++#define RGS_SSUSB_RX_FL_OUT_OFST (0) ++ ++//U3D_PHYD_MON2 ++#define RGS_SSUSB_T2RLB_ERRCNT_OFST (16) ++#define RGS_SSUSB_RETRACK_OFST (12) ++#define RGS_SSUSB_RXPLL_LOCK_OFST (10) ++#define RGS_SSUSB_CDR_VCOCAL_CPLT_D_OFST (9) ++#define RGS_SSUSB_PLL_VCOCAL_CPLT_D_OFST (8) ++#define RGS_SSUSB_PDNCTL_OFST (0) ++ ++//U3D_PHYD_MON3 ++#define RGS_SSUSB_TSEQ_ERRCNT_OFST (16) ++#define RGS_SSUSB_PRBS_ERRCNT_OFST (0) ++ ++//U3D_PHYD_MON4 ++#define RGS_SSUSB_RX_LSLOCK_CNT_OFST (24) ++#define RGS_SSUSB_SCP_DETCNT_OFST (16) ++#define RGS_SSUSB_TSEQ_DETCNT_OFST (0) ++ ++//U3D_PHYD_MON5 ++#define RGS_SSUSB_EBUFMSG_OFST (16) ++#define RGS_SSUSB_BERT_LOCK_OFST (15) ++#define RGS_SSUSB_SCP_DET_OFST (14) ++#define RGS_SSUSB_TSEQ_DET_OFST (13) ++#define RGS_SSUSB_EBUF_UDF_OFST (12) ++#define RGS_SSUSB_EBUF_OVF_OFST (11) ++#define RGS_SSUSB_PRBS_PASSTH_OFST (10) ++#define RGS_SSUSB_PRBS_PASS_OFST (9) ++#define RGS_SSUSB_PRBS_LOCK_OFST (8) ++#define RGS_SSUSB_T2RLB_ERR_OFST (6) ++#define RGS_SSUSB_T2RLB_PASSTH_OFST (5) ++#define RGS_SSUSB_T2RLB_PASS_OFST (4) ++#define RGS_SSUSB_T2RLB_LOCK_OFST (3) ++#define RGS_SSUSB_RX_IMPCAL_DONE_OFST (2) ++#define RGS_SSUSB_TX_IMPCAL_DONE_OFST (1) ++#define RGS_SSUSB_RXDETECTED_OFST (0) ++ ++//U3D_PHYD_MON6 ++#define RGS_SSUSB_SIGCAL_DONE_OFST (30) ++#define RGS_SSUSB_SIGCAL_CAL_OUT_OFST (29) ++#define RGS_SSUSB_SIGCAL_OFFSET_OFST (24) ++#define RGS_SSUSB_RX_IMP_SEL_OFST (16) ++#define RGS_SSUSB_TX_IMP_SEL_OFST (8) ++#define RGS_SSUSB_TFIFO_MSG_OFST (4) ++#define RGS_SSUSB_RFIFO_MSG_OFST (0) ++ ++//U3D_PHYD_MON7 ++#define RGS_SSUSB_FT_OUT_OFST (8) ++#define RGS_SSUSB_PRB_OUT_OFST (0) ++ ++//U3D_PHYA_RX_MON0 ++#define RGS_SSUSB_EQ_DCLEQ_OFST (24) ++#define RGS_SSUSB_EQ_DCD0H_OFST (16) ++#define RGS_SSUSB_EQ_DCD0L_OFST (8) ++#define RGS_SSUSB_EQ_DCD1H_OFST (0) ++ ++//U3D_PHYA_RX_MON1 ++#define RGS_SSUSB_EQ_DCD1L_OFST (24) ++#define RGS_SSUSB_EQ_DCE0_OFST (16) ++#define RGS_SSUSB_EQ_DCE1_OFST (8) ++#define RGS_SSUSB_EQ_DCHHL_OFST (0) ++ ++//U3D_PHYA_RX_MON2 ++#define RGS_SSUSB_EQ_LEQ_STOP_OFST (31) ++#define RGS_SSUSB_EQ_DCLHL_OFST (24) ++#define RGS_SSUSB_EQ_STATUS_OFST (16) ++#define RGS_SSUSB_EQ_DCEYE0_OFST (8) ++#define RGS_SSUSB_EQ_DCEYE1_OFST (0) ++ ++//U3D_PHYA_RX_MON3 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_0_OFST (0) ++ ++//U3D_PHYA_RX_MON4 ++#define RGS_SSUSB_EQ_EYE_MONITOR_ERRCNT_1_OFST (0) ++ ++//U3D_PHYA_RX_MON5 ++#define RGS_SSUSB_EQ_DCLEQOS_OFST (8) ++#define RGS_SSUSB_EQ_EYE_CNT_RDY_OFST (7) ++#define RGS_SSUSB_EQ_PILPO_OFST (0) ++ ++//U3D_PHYD_CPPAT2 ++#define RG_SSUSB_CPPAT_OUT_H_TMP2_OFST (16) ++#define RG_SSUSB_CPPAT_OUT_H_TMP1_OFST (8) ++#define RG_SSUSB_CPPAT_OUT_H_TMP0_OFST (0) ++ ++//U3D_EQ_EYE3 ++#define RG_SSUSB_EQ_LEQ_SHIFT_OFST (24) ++#define RG_SSUSB_EQ_EYE_CNT_OFST (0) ++ ++//U3D_KBAND_OUT ++#define RGS_SSUSB_CDR_BAND_5G_OFST (24) ++#define RGS_SSUSB_CDR_BAND_2P5G_OFST (16) ++#define RGS_SSUSB_PLL_BAND_5G_OFST (8) ++#define RGS_SSUSB_PLL_BAND_2P5G_OFST (0) ++ ++//U3D_KBAND_OUT1 ++#define RGS_SSUSB_CDR_VCOCAL_FAIL_OFST (24) ++#define RGS_SSUSB_CDR_VCOCAL_STATE_OFST (16) ++#define RGS_SSUSB_PLL_VCOCAL_FAIL_OFST (8) ++#define RGS_SSUSB_PLL_VCOCAL_STATE_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct u3phyd_bank2_reg { ++ //0x0 ++ PHY_LE32 b2_phyd_top1; ++ PHY_LE32 b2_phyd_top2; ++ PHY_LE32 b2_phyd_top3; ++ PHY_LE32 b2_phyd_top4; ++ //0x10 ++ PHY_LE32 b2_phyd_top5; ++ PHY_LE32 b2_phyd_top6; ++ PHY_LE32 b2_phyd_top7; ++ PHY_LE32 b2_phyd_p_sigdet1; ++ //0x20 ++ PHY_LE32 b2_phyd_p_sigdet2; ++ PHY_LE32 b2_phyd_p_sigdet_cal1; ++ PHY_LE32 b2_phyd_rxdet1; ++ PHY_LE32 b2_phyd_rxdet2; ++ //0x30 ++ PHY_LE32 b2_phyd_misc0; ++ PHY_LE32 b2_phyd_misc2; ++ PHY_LE32 b2_phyd_misc3; ++ PHY_LE32 reserve0; ++ //0x40 ++ PHY_LE32 b2_rosc_0; ++ PHY_LE32 b2_rosc_1; ++ PHY_LE32 b2_rosc_2; ++ PHY_LE32 b2_rosc_3; ++ //0x50 ++ PHY_LE32 b2_rosc_4; ++ PHY_LE32 b2_rosc_5; ++ PHY_LE32 b2_rosc_6; ++ PHY_LE32 b2_rosc_7; ++ //0x60 ++ PHY_LE32 b2_rosc_8; ++ PHY_LE32 b2_rosc_9; ++ PHY_LE32 b2_rosc_a; ++ PHY_LE32 reserve1; ++ //0x70~0xd0 ++ PHY_LE32 reserve2[28]; ++ //0xe0 ++ PHY_LE32 phyd_version; ++ PHY_LE32 phyd_model; ++}; ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP (0xf<<28) //31:28 ++#define RG_SSUSB_PCIE2_K_FUL (0xf<<24) //27:24 ++#define RG_SSUSB_TX_EIDLE_LP_EN (0x1<<17) //17:17 ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN (0x1<<16) //16:16 ++#define RG_SSUSB_SIGDET_EN (0x1<<15) //15:15 ++#define RG_SSUSB_FORCE_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_CLKRX_EN (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_CLKRX_EN (0x1<<12) //12:12 ++#define RG_SSUSB_CLKTX_EN (0x1<<11) //11:11 ++#define RG_SSUSB_FORCE_CLKTX_EN (0x1<<10) //10:10 ++#define RG_SSUSB_CLK_REQ_N_I (0x1<<9) //9:9 ++#define RG_SSUSB_FORCE_CLK_REQ_N_I (0x1<<8) //8:8 ++#define RG_SSUSB_RATE (0x1<<6) //6:6 ++#define RG_SSUSB_FORCE_RATE (0x1<<5) //5:5 ++#define RG_SSUSB_PCIE_MODE_SEL (0x1<<4) //4:4 ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL (0x1<<3) //3:3 ++#define RG_SSUSB_PHY_MODE (0x3<<1) //2:1 ++#define RG_SSUSB_FORCE_PHY_MODE (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB (0x1<<30) //30:30 ++#define RG_SSUSB_IDRV_6DB (0x3f<<24) //29:24 ++#define RG_SSUSB_FORCE_IDEM_3P5DB (0x1<<22) //22:22 ++#define RG_SSUSB_IDEM_3P5DB (0x3f<<16) //21:16 ++#define RG_SSUSB_FORCE_IDRV_3P5DB (0x1<<14) //14:14 ++#define RG_SSUSB_IDRV_3P5DB (0x3f<<8) //13:8 ++#define RG_SSUSB_FORCE_IDRV_0DB (0x1<<6) //6:6 ++#define RG_SSUSB_IDRV_0DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI (0x7<<25) //27:25 ++#define RG_SSUSB_FORCE_TX_BIASI_EN (0x1<<24) //24:24 ++#define RG_SSUSB_TX_BIASI_EN (0x1<<16) //16:16 ++#define RG_SSUSB_FORCE_TX_BIASI (0x1<<13) //13:13 ++#define RG_SSUSB_FORCE_IDEM_6DB (0x1<<8) //8:8 ++#define RG_SSUSB_IDEM_6DB (0x3f<<0) //5:0 ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G1_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G1_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G1_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G1_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G1_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR (0xf<<28) //31:28 ++#define RG_SSUSB_G2_CDR_BIC_LTD0 (0xf<<24) //27:24 ++#define RG_SSUSB_G2_CDR_BC_LTD1 (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BC_LTR (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BC_LTD0 (0x1f<<0) //4:0 ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1 (0x1f<<24) //28:24 ++#define RG_SSUSB_G2_CDR_BIR_LTR (0x1f<<16) //20:16 ++#define RG_SSUSB_G2_CDR_BIR_LTD0 (0x1f<<8) //12:8 ++#define RG_SSUSB_G2_CDR_BIC_LTD1 (0xf<<0) //3:0 ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS (0x1<<31) //31:31 ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL (0x7f<<24) //30:24 ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL (0x7f<<16) //22:16 ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL (0x7f<<8) //14:8 ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL (0x7f<<0) //6:0 ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S (0x1<<29) //29:29 ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL (0x1<<28) //28:28 ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S (0x1<<27) //27:27 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S (0x3<<25) //26:25 ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_PRB_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_P_SIGDET_BK_SIG_T (0x3<<8) //9:8 ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS (0x1<<6) //6:6 ++#define RG_SSUSB_P_SIGDET_NON_BK_AD (0x1<<5) //5:5 ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ (0x1<<4) //4:4 ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL (0x3<<2) //3:2 ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL (0x3<<0) //1:0 ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET (0x1f<<24) //28:24 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET (0x1<<16) //16:16 ++#define RG_SSUSB_P_SIGDET_CAL_EN (0x1<<8) //8:8 ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN (0x1<<3) //3:3 ++#define RG_SSUSB_P_SIGDET_FLT_EN (0x1<<2) //2:2 ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD (0x1<<1) //1:1 ++#define RG_SSUSB_P_SIGDET_REK (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL (0x1<<31) //31:31 ++#define RG_SSUSB_FORCE_CMDET (0x1<<30) //30:30 ++#define RG_SSUSB_RXDET_EN (0x1<<29) //29:29 ++#define RG_SSUSB_FORCE_RXDET_EN (0x1<<28) //28:28 ++#define RG_SSUSB_RXDET_K_TWICE (0x1<<27) //27:27 ++#define RG_SSUSB_RXDET_STB3_SET (0x1ff<<18) //26:18 ++#define RG_SSUSB_RXDET_STB2_SET (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB1_SET (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN (0x1<<31) //31:31 ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN (0x1<<30) //30:30 ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN (0x1<<29) //29:29 ++#define RG_SSUSB_PDN_T_SEL (0x3<<18) //19:18 ++#define RG_SSUSB_RXDET_STB3_SET_P3 (0x1ff<<9) //17:9 ++#define RG_SSUSB_RXDET_STB2_SET_P3 (0x1ff<<0) //8:0 ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN (0x1<<22) //22:22 ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN (0x1<<21) //21:21 ++#define RG_SSUSB_RXLFPS_ENTXDRV (0x1<<20) //20:20 ++#define RG_SSUSB_RX_FL_UNLOCKTH (0xf<<16) //19:16 ++#define RG_SSUSB_LFPS_PSEL (0x1<<15) //15:15 ++#define RG_SSUSB_RX_SIGDET_EN (0x1<<14) //14:14 ++#define RG_SSUSB_RX_SIGDET_EN_SEL (0x1<<13) //13:13 ++#define RG_SSUSB_RX_PI_CAL_EN (0x1<<12) //12:12 ++#define RG_SSUSB_RX_PI_CAL_EN_SEL (0x1<<11) //11:11 ++#define RG_SSUSB_P3_CLS_CK_SEL (0x1<<10) //10:10 ++#define RG_SSUSB_T2RLB_PSEL (0x3<<8) //9:8 ++#define RG_SSUSB_PPCTL_PSEL (0x7<<5) //7:5 ++#define RG_SSUSB_PHYD_TX_DATA_INV (0x1<<4) //4:4 ++#define RG_SSUSB_BERTLB_PSEL (0x3<<2) //3:2 ++#define RG_SSUSB_RETRACK_DIS (0x1<<1) //1:1 ++#define RG_SSUSB_PPERRCNT_CLR (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2 (0x1<<31) //31:31 ++#define RG_SSUSB_FRC_PLL_DDS_IADJ (0xf<<27) //30:27 ++#define RG_SSUSB_P_SIGDET_125FILTER (0x1<<26) //26:26 ++#define RG_SSUSB_P_SIGDET_RST_FILTER (0x1<<25) //25:25 ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW (0x1<<24) //24:24 ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW (0x1<<23) //23:23 ++#define RG_SSUSB_EIDLE_BF_RXDET (0x1<<22) //22:22 ++#define RG_SSUSB_EIDLE_LP_STBCYC (0x1ff<<13) //21:13 ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY (0x3f<<7) //12:7 ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY (0x3f<<1) //6:1 ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV (0x1<<0) //0:0 ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE (0x7<<16) //18:16 ++#define RGS_SSUSB_PPERRCNT (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND (0x1ff<<23) //31:23 ++#define RG_SSUSB_XTAL_OSC_CNTEND (0x7f<<16) //22:16 ++#define RG_SSUSB_RING_OSC_EN (0x1<<3) //3:3 ++#define RG_SSUSB_RING_OSC_FORCE_EN (0x1<<2) //2:2 ++#define RG_SSUSB_FRC_RING_BYPASS_DET (0x1<<1) //1:1 ++#define RG_SSUSB_RING_BYPASS_DET (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3 (0x1<<20) //20:20 ++#define RG_SSUSB_RING_OSC_P3 (0x1<<19) //19:19 ++#define RG_SSUSB_RING_OSC_FRC_RECAL (0x3<<17) //18:17 ++#define RG_SSUSB_RING_OSC_RECAL (0x1<<16) //16:16 ++#define RG_SSUSB_RING_OSC_SEL (0xff<<8) //15:8 ++#define RG_SSUSB_RING_OSC_FRC_SEL (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_STRCYC3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_DETWIN2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND1 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND2 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3 (0xffff<<16) //31:16 ++#define RG_SSUSB_RING_DET_UBOND3 (0xffff<<0) //15:0 ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE (0xffff<<16) //31:16 ++#define RG_SSUSB_ROSC_PROB_SEL (0xf<<2) //5:2 ++#define RG_SSUSB_RING_FREQMETER_EN (0x1<<1) //1:1 ++#define RG_SSUSB_RING_DET_BPS_UBOND (0x1<<0) //0:0 ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT (0xffff<<16) //31:16 ++#define RGS_SSUSB_RING_OSC_STATE (0x3<<10) //11:10 ++#define RGS_SSUSB_RING_OSC_STABLE (0x1<<9) //9:9 ++#define RGS_SSUSB_RING_OSC_CAL_FAIL (0x1<<8) //8:8 ++#define RGS_SSUSB_RING_OSC_CAL (0xff<<0) //7:0 ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT (0xff<<0) //7:0 ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION (0xffffffff<<0) //31:0 ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL (0xffffffff<<0) //31:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_B2_PHYD_TOP1 ++#define RG_SSUSB_PCIE2_K_EMP_OFST (28) ++#define RG_SSUSB_PCIE2_K_FUL_OFST (24) ++#define RG_SSUSB_TX_EIDLE_LP_EN_OFST (17) ++#define RG_SSUSB_FORCE_TX_EIDLE_LP_EN_OFST (16) ++#define RG_SSUSB_SIGDET_EN_OFST (15) ++#define RG_SSUSB_FORCE_SIGDET_EN_OFST (14) ++#define RG_SSUSB_CLKRX_EN_OFST (13) ++#define RG_SSUSB_FORCE_CLKRX_EN_OFST (12) ++#define RG_SSUSB_CLKTX_EN_OFST (11) ++#define RG_SSUSB_FORCE_CLKTX_EN_OFST (10) ++#define RG_SSUSB_CLK_REQ_N_I_OFST (9) ++#define RG_SSUSB_FORCE_CLK_REQ_N_I_OFST (8) ++#define RG_SSUSB_RATE_OFST (6) ++#define RG_SSUSB_FORCE_RATE_OFST (5) ++#define RG_SSUSB_PCIE_MODE_SEL_OFST (4) ++#define RG_SSUSB_FORCE_PCIE_MODE_SEL_OFST (3) ++#define RG_SSUSB_PHY_MODE_OFST (1) ++#define RG_SSUSB_FORCE_PHY_MODE_OFST (0) ++ ++//U3D_B2_PHYD_TOP2 ++#define RG_SSUSB_FORCE_IDRV_6DB_OFST (30) ++#define RG_SSUSB_IDRV_6DB_OFST (24) ++#define RG_SSUSB_FORCE_IDEM_3P5DB_OFST (22) ++#define RG_SSUSB_IDEM_3P5DB_OFST (16) ++#define RG_SSUSB_FORCE_IDRV_3P5DB_OFST (14) ++#define RG_SSUSB_IDRV_3P5DB_OFST (8) ++#define RG_SSUSB_FORCE_IDRV_0DB_OFST (6) ++#define RG_SSUSB_IDRV_0DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP3 ++#define RG_SSUSB_TX_BIASI_OFST (25) ++#define RG_SSUSB_FORCE_TX_BIASI_EN_OFST (24) ++#define RG_SSUSB_TX_BIASI_EN_OFST (16) ++#define RG_SSUSB_FORCE_TX_BIASI_OFST (13) ++#define RG_SSUSB_FORCE_IDEM_6DB_OFST (8) ++#define RG_SSUSB_IDEM_6DB_OFST (0) ++ ++//U3D_B2_PHYD_TOP4 ++#define RG_SSUSB_G1_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G1_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G1_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G1_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G1_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP5 ++#define RG_SSUSB_G1_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G1_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G1_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G1_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_TOP6 ++#define RG_SSUSB_G2_CDR_BIC_LTR_OFST (28) ++#define RG_SSUSB_G2_CDR_BIC_LTD0_OFST (24) ++#define RG_SSUSB_G2_CDR_BC_LTD1_OFST (16) ++#define RG_SSUSB_G2_CDR_BC_LTR_OFST (8) ++#define RG_SSUSB_G2_CDR_BC_LTD0_OFST (0) ++ ++//U3D_B2_PHYD_TOP7 ++#define RG_SSUSB_G2_CDR_BIR_LTD1_OFST (24) ++#define RG_SSUSB_G2_CDR_BIR_LTR_OFST (16) ++#define RG_SSUSB_G2_CDR_BIR_LTD0_OFST (8) ++#define RG_SSUSB_G2_CDR_BIC_LTD1_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET1 ++#define RG_SSUSB_P_SIGDET_FLT_DIS_OFST (31) ++#define RG_SSUSB_P_SIGDET_FLT_G2_DEAST_SEL_OFST (24) ++#define RG_SSUSB_P_SIGDET_FLT_G1_DEAST_SEL_OFST (16) ++#define RG_SSUSB_P_SIGDET_FLT_P2_AST_SEL_OFST (8) ++#define RG_SSUSB_P_SIGDET_FLT_PX_AST_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET2 ++#define RG_SSUSB_P_SIGDET_RX_VAL_S_OFST (29) ++#define RG_SSUSB_P_SIGDET_L0S_DEAS_SEL_OFST (28) ++#define RG_SSUSB_P_SIGDET_L0_EXIT_S_OFST (27) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_T_S_OFST (25) ++#define RG_SSUSB_P_SIGDET_L0S_EXIT_S_OFST (24) ++#define RG_SSUSB_P_SIGDET_L0S_ENTRY_S_OFST (16) ++#define RG_SSUSB_P_SIGDET_PRB_SEL_OFST (10) ++#define RG_SSUSB_P_SIGDET_BK_SIG_T_OFST (8) ++#define RG_SSUSB_P_SIGDET_P2_RXLFPS_OFST (6) ++#define RG_SSUSB_P_SIGDET_NON_BK_AD_OFST (5) ++#define RG_SSUSB_P_SIGDET_BK_B_RXEQ_OFST (4) ++#define RG_SSUSB_P_SIGDET_G2_KO_SEL_OFST (2) ++#define RG_SSUSB_P_SIGDET_G1_KO_SEL_OFST (0) ++ ++//U3D_B2_PHYD_P_SIGDET_CAL1 ++#define RG_SSUSB_P_SIGDET_CAL_OFFSET_OFST (24) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_OFFSET_OFST (16) ++#define RG_SSUSB_P_SIGDET_CAL_EN_OFST (8) ++#define RG_SSUSB_P_FORCE_SIGDET_CAL_EN_OFST (3) ++#define RG_SSUSB_P_SIGDET_FLT_EN_OFST (2) ++#define RG_SSUSB_P_SIGDET_SAMPLE_PRD_OFST (1) ++#define RG_SSUSB_P_SIGDET_REK_OFST (0) ++ ++//U3D_B2_PHYD_RXDET1 ++#define RG_SSUSB_RXDET_PRB_SEL_OFST (31) ++#define RG_SSUSB_FORCE_CMDET_OFST (30) ++#define RG_SSUSB_RXDET_EN_OFST (29) ++#define RG_SSUSB_FORCE_RXDET_EN_OFST (28) ++#define RG_SSUSB_RXDET_K_TWICE_OFST (27) ++#define RG_SSUSB_RXDET_STB3_SET_OFST (18) ++#define RG_SSUSB_RXDET_STB2_SET_OFST (9) ++#define RG_SSUSB_RXDET_STB1_SET_OFST (0) ++ ++//U3D_B2_PHYD_RXDET2 ++#define RG_SSUSB_PHYD_TRAINDEC_FORCE_CGEN_OFST (31) ++#define RG_SSUSB_PHYD_BERTLB_FORCE_CGEN_OFST (30) ++#define RG_SSUSB_PHYD_T2RLB_FORCE_CGEN_OFST (29) ++#define RG_SSUSB_PDN_T_SEL_OFST (18) ++#define RG_SSUSB_RXDET_STB3_SET_P3_OFST (9) ++#define RG_SSUSB_RXDET_STB2_SET_P3_OFST (0) ++ ++//U3D_B2_PHYD_MISC0 ++#define RG_SSUSB_FORCE_PLL_DDS_HF_EN_OFST (22) ++#define RG_SSUSB_PLL_DDS_HF_EN_MAN_OFST (21) ++#define RG_SSUSB_RXLFPS_ENTXDRV_OFST (20) ++#define RG_SSUSB_RX_FL_UNLOCKTH_OFST (16) ++#define RG_SSUSB_LFPS_PSEL_OFST (15) ++#define RG_SSUSB_RX_SIGDET_EN_OFST (14) ++#define RG_SSUSB_RX_SIGDET_EN_SEL_OFST (13) ++#define RG_SSUSB_RX_PI_CAL_EN_OFST (12) ++#define RG_SSUSB_RX_PI_CAL_EN_SEL_OFST (11) ++#define RG_SSUSB_P3_CLS_CK_SEL_OFST (10) ++#define RG_SSUSB_T2RLB_PSEL_OFST (8) ++#define RG_SSUSB_PPCTL_PSEL_OFST (5) ++#define RG_SSUSB_PHYD_TX_DATA_INV_OFST (4) ++#define RG_SSUSB_BERTLB_PSEL_OFST (2) ++#define RG_SSUSB_RETRACK_DIS_OFST (1) ++#define RG_SSUSB_PPERRCNT_CLR_OFST (0) ++ ++//U3D_B2_PHYD_MISC2 ++#define RG_SSUSB_FRC_PLL_DDS_PREDIV2_OFST (31) ++#define RG_SSUSB_FRC_PLL_DDS_IADJ_OFST (27) ++#define RG_SSUSB_P_SIGDET_125FILTER_OFST (26) ++#define RG_SSUSB_P_SIGDET_RST_FILTER_OFST (25) ++#define RG_SSUSB_P_SIGDET_EID_USE_RAW_OFST (24) ++#define RG_SSUSB_P_SIGDET_LTD_USE_RAW_OFST (23) ++#define RG_SSUSB_EIDLE_BF_RXDET_OFST (22) ++#define RG_SSUSB_EIDLE_LP_STBCYC_OFST (13) ++#define RG_SSUSB_TX_EIDLE_LP_POSTDLY_OFST (7) ++#define RG_SSUSB_TX_EIDLE_LP_PREDLY_OFST (1) ++#define RG_SSUSB_TX_EIDLE_LP_EN_ADV_OFST (0) ++ ++//U3D_B2_PHYD_MISC3 ++#define RGS_SSUSB_DDS_CALIB_C_STATE_OFST (16) ++#define RGS_SSUSB_PPERRCNT_OFST (0) ++ ++//U3D_B2_ROSC_0 ++#define RG_SSUSB_RING_OSC_CNTEND_OFST (23) ++#define RG_SSUSB_XTAL_OSC_CNTEND_OFST (16) ++#define RG_SSUSB_RING_OSC_EN_OFST (3) ++#define RG_SSUSB_RING_OSC_FORCE_EN_OFST (2) ++#define RG_SSUSB_FRC_RING_BYPASS_DET_OFST (1) ++#define RG_SSUSB_RING_BYPASS_DET_OFST (0) ++ ++//U3D_B2_ROSC_1 ++#define RG_SSUSB_RING_OSC_FRC_P3_OFST (20) ++#define RG_SSUSB_RING_OSC_P3_OFST (19) ++#define RG_SSUSB_RING_OSC_FRC_RECAL_OFST (17) ++#define RG_SSUSB_RING_OSC_RECAL_OFST (16) ++#define RG_SSUSB_RING_OSC_SEL_OFST (8) ++#define RG_SSUSB_RING_OSC_FRC_SEL_OFST (0) ++ ++//U3D_B2_ROSC_2 ++#define RG_SSUSB_RING_DET_STRCYC2_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC1_OFST (0) ++ ++//U3D_B2_ROSC_3 ++#define RG_SSUSB_RING_DET_DETWIN1_OFST (16) ++#define RG_SSUSB_RING_DET_STRCYC3_OFST (0) ++ ++//U3D_B2_ROSC_4 ++#define RG_SSUSB_RING_DET_DETWIN3_OFST (16) ++#define RG_SSUSB_RING_DET_DETWIN2_OFST (0) ++ ++//U3D_B2_ROSC_5 ++#define RG_SSUSB_RING_DET_LBOND1_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND1_OFST (0) ++ ++//U3D_B2_ROSC_6 ++#define RG_SSUSB_RING_DET_LBOND2_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND2_OFST (0) ++ ++//U3D_B2_ROSC_7 ++#define RG_SSUSB_RING_DET_LBOND3_OFST (16) ++#define RG_SSUSB_RING_DET_UBOND3_OFST (0) ++ ++//U3D_B2_ROSC_8 ++#define RG_SSUSB_RING_RESERVE_OFST (16) ++#define RG_SSUSB_ROSC_PROB_SEL_OFST (2) ++#define RG_SSUSB_RING_FREQMETER_EN_OFST (1) ++#define RG_SSUSB_RING_DET_BPS_UBOND_OFST (0) ++ ++//U3D_B2_ROSC_9 ++#define RGS_FM_RING_CNT_OFST (16) ++#define RGS_SSUSB_RING_OSC_STATE_OFST (10) ++#define RGS_SSUSB_RING_OSC_STABLE_OFST (9) ++#define RGS_SSUSB_RING_OSC_CAL_FAIL_OFST (8) ++#define RGS_SSUSB_RING_OSC_CAL_OFST (0) ++ ++//U3D_B2_ROSC_A ++#define RGS_SSUSB_ROSC_PROB_OUT_OFST (0) ++ ++//U3D_PHYD_VERSION ++#define RGS_SSUSB_PHYD_VERSION_OFST (0) ++ ++//U3D_PHYD_MODEL ++#define RGS_SSUSB_PHYD_MODEL_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_chip_reg { ++ PHY_LE32 xtalbias; ++ PHY_LE32 syspll1; ++ PHY_LE32 gpio_ctla; ++ PHY_LE32 gpio_ctlb; ++ PHY_LE32 gpio_ctlc; ++}; ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB (0xffffffff<<0) //31:0 ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC (0xffffffff<<0) //31:0 ++ ++/* OFFSET */ ++ ++//U3D_GPIO_CTLA ++#define RG_C60802_GPIO_CTLA_OFST (0) ++ ++//U3D_GPIO_CTLB ++#define RG_C60802_GPIO_CTLB_OFST (0) ++ ++//U3D_GPIO_CTLC ++#define RG_C60802_GPIO_CTLC_OFST (0) ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++struct sifslv_fm_feg { ++ //0x0 ++ PHY_LE32 fmcr0; ++ PHY_LE32 fmcr1; ++ PHY_LE32 fmcr2; ++ PHY_LE32 fmmonr0; ++ //0x10 ++ PHY_LE32 fmmonr1; ++}; ++ ++//U3D_FMCR0 ++#define RG_LOCKTH (0xf<<28) //31:28 ++#define RG_MONCLK_SEL (0x3<<26) //27:26 ++#define RG_FM_MODE (0x1<<25) //25:25 ++#define RG_FREQDET_EN (0x1<<24) //24:24 ++#define RG_CYCLECNT (0xffffff<<0) //23:0 ++ ++//U3D_FMCR1 ++#define RG_TARGET (0xffffffff<<0) //31:0 ++ ++//U3D_FMCR2 ++#define RG_OFFSET (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT (0xffffffff<<0) //31:0 ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3 (0x1<<9) //9:9 ++#define RG_FRCK_EN (0x1<<8) //8:8 ++#define USBPLL_LOCK (0x1<<1) //1:1 ++#define USB_FM_VLD (0x1<<0) //0:0 ++ ++ ++/* OFFSET */ ++ ++//U3D_FMCR0 ++#define RG_LOCKTH_OFST (28) ++#define RG_MONCLK_SEL_OFST (26) ++#define RG_FM_MODE_OFST (25) ++#define RG_FREQDET_EN_OFST (24) ++#define RG_CYCLECNT_OFST (0) ++ ++//U3D_FMCR1 ++#define RG_TARGET_OFST (0) ++ ++//U3D_FMCR2 ++#define RG_OFFSET_OFST (0) ++ ++//U3D_FMMONR0 ++#define USB_FM_OUT_OFST (0) ++ ++//U3D_FMMONR1 ++#define RG_MONCLK_SEL_3_OFST (9) ++#define RG_FRCK_EN_OFST (8) ++#define USBPLL_LOCK_OFST (1) ++#define USB_FM_VLD_OFST (0) ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++PHY_INT32 phy_init(struct u3phy_info *info); ++PHY_INT32 phy_change_pipe_phase(struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++PHY_INT32 eyescan_init(struct u3phy_info *info); ++PHY_INT32 phy_eyescan(struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y ++ , PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++PHY_INT32 u2_save_cur_en(struct u3phy_info *info); ++PHY_INT32 u2_save_cur_re(struct u3phy_info *info); ++PHY_INT32 u2_slew_rate_calibration(struct u3phy_info *info); ++ ++#endif ++#endif +--- /dev/null ++++ b/drivers/usb/host/mtk-phy-ahb.c +@@ -0,0 +1,58 @@ ++#include "mtk-phy.h" ++#ifdef CONFIG_U3D_HAL_SUPPORT ++#include "mu3d_hal_osal.h" ++#endif ++ ++#ifdef CONFIG_U3_PHY_AHB_SUPPORT ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++ ++#ifndef CONFIG_U3D_HAL_SUPPORT ++#define os_writel(addr,data) {\ ++ (*((volatile PHY_UINT32*)(addr)) = data);\ ++ } ++#define os_readl(addr) *((volatile PHY_UINT32*)(addr)) ++#define os_writelmsk(addr, data, msk) \ ++ { os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk)))); \ ++ } ++#define os_setmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) | msk); \ ++ } ++#define os_clrmsk(addr, msk) \ ++ { os_writel(addr, os_readl(addr) &~ msk); \ ++ } ++/*msk the data first, then umsk with the umsk.*/ ++#define os_writelmskumsk(addr, data, msk, umsk) \ ++{\ ++ os_writel(addr, ((os_readl(addr) & ~(msk)) | ((data) & (msk))) & (umsk));\ ++} ++ ++#endif ++ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data) ++{ ++ os_writel(addr, data); ++ ++ return 0; ++} ++ ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr) ++{ ++ return os_readl(addr); ++} ++ ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data) ++{ ++ os_writelmsk(addr&0xfffffffc, data<<((addr%4)*8), 0xff<<((addr%4)*8)); ++ ++ return 0; ++} ++ ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr) ++{ ++ return ((os_readl(addr)>>((addr%4)*8))&0xff); ++} ++ ++#endif ++ +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.c +@@ -0,0 +1,102 @@ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#define U3_PHY_LIB ++#include "mtk-phy.h" ++#ifdef CONFIG_PROJECT_7621 ++#include "mtk-phy-7621.h" ++#endif ++#ifdef CONFIG_PROJECT_PHY ++static struct u3phy_operator project_operators = { ++ .init = phy_init, ++ .change_pipe_phase = phy_change_pipe_phase, ++ .eyescan_init = eyescan_init, ++ .eyescan = phy_eyescan, ++ .u2_slew_rate_calibration = u2_slew_rate_calibration, ++}; ++#endif ++ ++ ++PHY_INT32 u3phy_init(){ ++#ifndef CONFIG_PROJECT_PHY ++ PHY_INT32 u3phy_version; ++#endif ++ ++ if(u3phy != NULL){ ++ return PHY_TRUE; ++ } ++ ++ u3phy = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1 = kmalloc(sizeof(struct u3phy_info), GFP_NOIO); ++#endif ++#ifdef CONFIG_U3_PHY_GPIO_SUPPORT ++ u3phy->phyd_version_addr = 0x2000e4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = 0x2000e4; ++#endif ++#else ++ u3phy->phyd_version_addr = U3_PHYD_B2_BASE + 0xe4; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->phyd_version_addr = U3_PHYD_B2_BASE_P1 + 0xe4; ++#endif ++#endif ++ ++#ifdef CONFIG_PROJECT_PHY ++ ++ u3phy->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE; ++ u3phy->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE; ++ u3phy->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE; ++ u3phy->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE; ++ u3phy->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE; ++ u3phy->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++ u3phy_ops = &project_operators; ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ u3phy_p1->u2phy_regs = (struct u2phy_reg *)U2_PHY_BASE_P1; ++ u3phy_p1->u3phyd_regs = (struct u3phyd_reg *)U3_PHYD_BASE_P1; ++ u3phy_p1->u3phyd_bank2_regs = (struct u3phyd_bank2_reg *)U3_PHYD_B2_BASE_P1; ++ u3phy_p1->u3phya_regs = (struct u3phya_reg *)U3_PHYA_BASE_P1; ++ u3phy_p1->u3phya_da_regs = (struct u3phya_da_reg *)U3_PHYA_DA_BASE_P1; ++ u3phy_p1->sifslv_chip_regs = (struct sifslv_chip_reg *)SIFSLV_CHIP_BASE; ++ u3phy_p1->sifslv_fm_regs = (struct sifslv_fm_feg *)SIFSLV_FM_FEG_BASE; ++#endif ++#endif ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT8 cur_value; ++ PHY_INT8 new_value; ++ ++ cur_value = U3PhyReadReg8(addr); ++ new_value = (cur_value & (~mask)) | (value << offset); ++ //udelay(i2cdelayus); ++ U3PhyWriteReg8(addr, new_value); ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value){ ++ PHY_INT32 cur_value; ++ PHY_INT32 new_value; ++ ++ cur_value = U3PhyReadReg32(addr); ++ new_value = (cur_value & (~mask)) | ((value << offset) & mask); ++ U3PhyWriteReg32(addr, new_value); ++ //DRV_MDELAY(100); ++ ++ return PHY_TRUE; ++} ++ ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr,PHY_INT32 offset,PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg8(addr) & mask) >> offset); ++} ++ ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask){ ++ ++ return ((U3PhyReadReg32(addr) & mask) >> offset); ++} ++ +--- /dev/null ++++ b/drivers/usb/host/mtk-phy.h +@@ -0,0 +1,179 @@ ++#ifndef __MTK_PHY_NEW_H ++#define __MTK_PHY_NEW_H ++ ++//#define CONFIG_U3D_HAL_SUPPORT ++ ++/* include system library */ ++#include <linux/gfp.h> ++#include <linux/kernel.h> ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++/* Choose PHY R/W implementation */ ++//#define CONFIG_U3_PHY_GPIO_SUPPORT //SW I2C implemented by GPIO ++#define CONFIG_U3_PHY_AHB_SUPPORT //AHB, only on SoC ++ ++/* Choose PHY version */ ++//Select your project by defining one of the followings ++#define CONFIG_PROJECT_7621 //7621 ++#define CONFIG_PROJECT_PHY ++ ++/* BASE ADDRESS DEFINE, should define this on ASIC */ ++#define PHY_BASE 0xBE1D0000 ++#define SIFSLV_FM_FEG_BASE (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE (PHY_BASE+0x700) ++#define U2_PHY_BASE (PHY_BASE+0x800) ++#define U3_PHYD_BASE (PHY_BASE+0x900) ++#define U3_PHYD_B2_BASE (PHY_BASE+0xa00) ++#define U3_PHYA_BASE (PHY_BASE+0xb00) ++#define U3_PHYA_DA_BASE (PHY_BASE+0xc00) ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define SIFSLV_FM_FEG_BASE_P1 (PHY_BASE+0x100) ++#define SIFSLV_CHIP_BASE_P1 (PHY_BASE+0x700) ++#define U2_PHY_BASE_P1 (PHY_BASE+0x1000) ++#define U3_PHYD_BASE_P1 (PHY_BASE+0x1100) ++#define U3_PHYD_B2_BASE_P1 (PHY_BASE+0x1200) ++#define U3_PHYA_BASE_P1 (PHY_BASE+0x1300) ++#define U3_PHYA_DA_BASE_P1 (PHY_BASE+0x1400) ++#endif ++ ++/* ++ ++0x00000100 MODULE ssusb_sifslv_fmreg ssusb_sifslv_fmreg ++0x00000700 MODULE ssusb_sifslv_ippc ssusb_sifslv_ippc ++0x00000800 MODULE ssusb_sifslv_u2phy_com ssusb_sifslv_u2_phy_com_T28 ++0x00000900 MODULE ssusb_sifslv_u3phyd ssusb_sifslv_u3phyd_T28 ++0x00000a00 MODULE ssusb_sifslv_u3phyd_bank2 ssusb_sifslv_u3phyd_bank2_T28 ++0x00000b00 MODULE ssusb_sifslv_u3phya ssusb_sifslv_u3phya_T28 ++0x00000c00 MODULE ssusb_sifslv_u3phya_da ssusb_sifslv_u3phya_da_T28 ++*/ ++ ++ ++/* TYPE DEFINE */ ++typedef unsigned int PHY_UINT32; ++typedef int PHY_INT32; ++typedef unsigned short PHY_UINT16; ++typedef short PHY_INT16; ++typedef unsigned char PHY_UINT8; ++typedef char PHY_INT8; ++ ++typedef PHY_UINT32 __bitwise PHY_LE32; ++ ++/* CONSTANT DEFINE */ ++#define PHY_FALSE 0 ++#define PHY_TRUE 1 ++ ++/* MACRO DEFINE */ ++#define DRV_WriteReg32(addr,data) ((*(volatile PHY_UINT32 *)(addr)) = (unsigned long)(data)) ++#define DRV_Reg32(addr) (*(volatile PHY_UINT32 *)(addr)) ++ ++#define DRV_MDELAY mdelay ++#define DRV_MSLEEP msleep ++#define DRV_UDELAY udelay ++#define DRV_USLEEP usleep ++ ++/* PHY FUNCTION DEFINE, implemented in platform files, ex. ahb, gpio */ ++PHY_INT32 U3PhyWriteReg32(PHY_UINT32 addr, PHY_UINT32 data); ++PHY_INT32 U3PhyReadReg32(PHY_UINT32 addr); ++PHY_INT32 U3PhyWriteReg8(PHY_UINT32 addr, PHY_UINT8 data); ++PHY_INT8 U3PhyReadReg8(PHY_UINT32 addr); ++ ++/* PHY GENERAL USAGE FUNC, implemented in mtk-phy.c */ ++PHY_INT32 U3PhyWriteField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyWriteField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask, PHY_INT32 value); ++PHY_INT32 U3PhyReadField8(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++PHY_INT32 U3PhyReadField32(PHY_INT32 addr, PHY_INT32 offset, PHY_INT32 mask); ++ ++struct u3phy_info { ++ PHY_INT32 phy_version; ++ PHY_INT32 phyd_version_addr; ++ ++#ifdef CONFIG_PROJECT_PHY ++ struct u2phy_reg *u2phy_regs; ++ struct u3phya_reg *u3phya_regs; ++ struct u3phya_da_reg *u3phya_da_regs; ++ struct u3phyd_reg *u3phyd_regs; ++ struct u3phyd_bank2_reg *u3phyd_bank2_regs; ++ struct sifslv_chip_reg *sifslv_chip_regs; ++ struct sifslv_fm_feg *sifslv_fm_regs; ++#endif ++}; ++ ++struct u3phy_operator { ++ PHY_INT32 (*init) (struct u3phy_info *info); ++ PHY_INT32 (*change_pipe_phase) (struct u3phy_info *info, PHY_INT32 phy_drv, PHY_INT32 pipe_phase); ++ PHY_INT32 (*eyescan_init) (struct u3phy_info *info); ++ PHY_INT32 (*eyescan) (struct u3phy_info *info, PHY_INT32 x_t1, PHY_INT32 y_t1, PHY_INT32 x_br, PHY_INT32 y_br, PHY_INT32 delta_x, PHY_INT32 delta_y, PHY_INT32 eye_cnt, PHY_INT32 num_cnt, PHY_INT32 PI_cal_en, PHY_INT32 num_ignore_cnt); ++ PHY_INT32 (*u2_save_current_entry) (struct u3phy_info *info); ++ PHY_INT32 (*u2_save_current_recovery) (struct u3phy_info *info); ++ PHY_INT32 (*u2_slew_rate_calibration) (struct u3phy_info *info); ++}; ++ ++#ifdef U3_PHY_LIB ++#define AUTOEXT ++#else ++#define AUTOEXT extern ++#endif ++ ++AUTOEXT struct u3phy_info *u3phy; ++AUTOEXT struct u3phy_info *u3phy_p1; ++AUTOEXT struct u3phy_operator *u3phy_ops; ++ ++/*********eye scan required*********/ ++ ++#define LO_BYTE(x) ((PHY_UINT8)((x) & 0xFF)) ++#define HI_BYTE(x) ((PHY_UINT8)(((x) & 0xFF00) >> 8)) ++ ++typedef enum ++{ ++ SCAN_UP, ++ SCAN_DN ++} enumScanDir; ++ ++struct strucScanRegion ++{ ++ PHY_INT8 bX_tl; ++ PHY_INT8 bY_tl; ++ PHY_INT8 bX_br; ++ PHY_INT8 bY_br; ++ PHY_INT8 bDeltaX; ++ PHY_INT8 bDeltaY; ++}; ++ ++struct strucTestCycle ++{ ++ PHY_UINT16 wEyeCnt; ++ PHY_INT8 bNumOfEyeCnt; ++ PHY_INT8 bPICalEn; ++ PHY_INT8 bNumOfIgnoreCnt; ++}; ++ ++#define ERRCNT_MAX 128 ++#define CYCLE_COUNT_MAX 15 ++ ++/// the map resolution is 128 x 128 pts ++#define MAX_X 127 ++#define MAX_Y 127 ++#define MIN_X 0 ++#define MIN_Y 0 ++ ++PHY_INT32 u3phy_init(void); ++ ++AUTOEXT struct strucScanRegion _rEye1; ++AUTOEXT struct strucScanRegion _rEye2; ++AUTOEXT struct strucTestCycle _rTestCycle; ++AUTOEXT PHY_UINT8 _bXcurr; ++AUTOEXT PHY_UINT8 _bYcurr; ++AUTOEXT enumScanDir _eScanDir; ++AUTOEXT PHY_INT8 _fgXChged; ++AUTOEXT PHY_INT8 _bPIResult; ++/* use local variable instead to save memory use */ ++#if 0 ++AUTOEXT PHY_UINT32 pwErrCnt0[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++AUTOEXT PHY_UINT32 pwErrCnt1[CYCLE_COUNT_MAX][ERRCNT_MAX][ERRCNT_MAX]; ++#endif ++ ++/***********************************/ ++#endif ++ +--- a/drivers/usb/host/pci-quirks.h ++++ b/drivers/usb/host/pci-quirks.h +@@ -1,7 +1,7 @@ + #ifndef __LINUX_USB_PCI_QUIRKS_H + #define __LINUX_USB_PCI_QUIRKS_H + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); + int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); + #endif /* CONFIG_PCI */ +--- a/drivers/usb/host/xhci-dbg.c ++++ b/drivers/usb/host/xhci-dbg.c +@@ -21,6 +21,9 @@ + */ + + #include "xhci.h" ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include "xhci-mtk.h" ++#endif + + #define XHCI_INIT_VALUE 0x0 + +--- a/drivers/usb/host/xhci-mem.c ++++ b/drivers/usb/host/xhci-mem.c +@@ -65,6 +65,9 @@ static struct xhci_segment *xhci_segment + + static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) + { ++ if (!seg) ++ return; ++ + if (seg->trbs) { + dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); + seg->trbs = NULL; +@@ -1446,9 +1449,17 @@ int xhci_endpoint_init(struct xhci_hcd * + max_burst = (usb_endpoint_maxp(&ep->desc) + & 0x1800) >> 11; + } ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + case USB_SPEED_FULL: + case USB_SPEED_LOW: ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) ++ max_packet += 2; ++#endif + break; + default: + BUG(); +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.c +@@ -0,0 +1,115 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++ ++static int g_num_u3_port; ++static int g_num_u2_port; ++ ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci){ ++ int i; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=1; i<=g_num_u3_port; i++){ ++ port_id=i; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = xhci_readl(xhci, addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ xhci_writel(xhci, temp, addr); ++ } ++ for(i=1; i<=g_num_u2_port; i++){ ++ port_id=i+g_num_u3_port; ++ addr = &xhci->op_regs->port_status_base + NUM_PORT_REGS*(port_id-1 & 0xff); ++ temp = xhci_readl(xhci, addr); ++ temp = xhci_port_state_to_neutral(temp); ++ temp |= PORT_POWER; ++ xhci_writel(xhci, temp, addr); ++ } ++} ++ ++void enableAllClockPower(){ ++ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ //2. Enable xHC ++ writel(readl(SSUSB_IP_PW_CTRL) | (SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL) & (~SSUSB_IP_SW_RST), SSUSB_IP_PW_CTRL); ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ //1. Enable target ports ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp & (~SSUSB_U3_PORT_PDN) & (~SSUSB_U3_PORT_DIS); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp & (~SSUSB_U2_PORT_PDN) & (~SSUSB_U2_PORT_DIS); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ msleep(100); ++} ++ ++ ++//(X)disable clock/power of a port ++//(X)if all ports are disabled, disable IP ctrl power ++//disable all ports and IP clock/power, this is just mention HW that the power/clock of port ++//and IP could be disable if suspended. ++//If doesn't not disable all ports at first, the IP clock/power will never be disabled ++//(some U2 and U3 ports are binded to the same connection, that is, they will never enter suspend at the same time ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void disablePortClockPower(void){ ++ int i; ++ u32 temp; ++ ++ g_num_u3_port = SSUSB_U3_PORT_NUM(readl(SSUSB_IP_CAP)); ++ g_num_u2_port = SSUSB_U2_PORT_NUM(readl(SSUSB_IP_CAP)); ++ ++ for(i=0; i<g_num_u3_port; i++){ ++ temp = readl(SSUSB_U3_CTRL(i)); ++ temp = temp | (SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(i)); ++ } ++ for(i=0; i<g_num_u2_port; i++){ ++ temp = readl(SSUSB_U2_CTRL(i)); ++ temp = temp | (SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(i)); ++ } ++ writel(readl(SSUSB_IP_PW_CTRL_1) | (SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++} ++ ++//if IP ctrl power is disabled, enable it ++//enable clock/power of a port ++//port_index: port number ++//port_rev: 0x2 - USB2.0, 0x3 - USB3.0 (SuperSpeed) ++void enablePortClockPower(int port_index, int port_rev){ ++ int i; ++ u32 temp; ++ ++ writel(readl(SSUSB_IP_PW_CTRL_1) & (~SSUSB_IP_PDN), SSUSB_IP_PW_CTRL_1); ++ ++ if(port_rev == 0x3){ ++ temp = readl(SSUSB_U3_CTRL(port_index)); ++ temp = temp & (~SSUSB_U3_PORT_PDN); ++ writel(temp, SSUSB_U3_CTRL(port_index)); ++ } ++ else if(port_rev == 0x2){ ++ temp = readl(SSUSB_U2_CTRL(port_index)); ++ temp = temp & (~SSUSB_U2_PORT_PDN); ++ writel(temp, SSUSB_U2_CTRL(port_index)); ++ } ++} ++ +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-power.h +@@ -0,0 +1,13 @@ ++#ifndef _XHCI_MTK_POWER_H ++#define _XHCI_MTK_POWER_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++#include "xhci-mtk.h" ++ ++void enableXhciAllPortPower(struct xhci_hcd *xhci); ++void enableAllClockPower(void); ++void disablePortClockPower(void); ++void enablePortClockPower(int port_index, int port_rev); ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.c +@@ -0,0 +1,608 @@ ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++ ++static struct sch_ep **ss_out_eps[MAX_EP_NUM]; ++static struct sch_ep **ss_in_eps[MAX_EP_NUM]; ++static struct sch_ep **hs_eps[MAX_EP_NUM]; //including tt isoc ++static struct sch_ep **tt_intr_eps[MAX_EP_NUM]; ++ ++ ++int mtk_xhci_scheduler_init(void){ ++ int i; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_out_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ss_in_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ hs_eps[i] = NULL; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ tt_intr_eps[i] = NULL; ++ } ++ return 0; ++} ++ ++int add_sch_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, int offset, int repeat, int pkts, int cs_count, int burst_mode ++ , int bw_cost, mtk_u32 *ep, struct sch_ep *tmp_ep){ ++ ++ struct sch_ep **ep_array; ++ int i; ++ ++ if(is_in && dev_speed == USB_SPEED_SUPER ){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if(dev_speed == USB_SPEED_SUPER){ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if(dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)){ ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for(i=0; i<MAX_EP_NUM; i++){ ++ if(ep_array[i] == NULL){ ++ tmp_ep->dev_speed = dev_speed; ++ tmp_ep->isTT = isTT; ++ tmp_ep->is_in = is_in; ++ tmp_ep->ep_type = ep_type; ++ tmp_ep->maxp = maxp; ++ tmp_ep->interval = interval; ++ tmp_ep->burst = burst; ++ tmp_ep->mult = mult; ++ tmp_ep->offset = offset; ++ tmp_ep->repeat = repeat; ++ tmp_ep->pkts = pkts; ++ tmp_ep->cs_count = cs_count; ++ tmp_ep->burst_mode = burst_mode; ++ tmp_ep->bw_cost = bw_cost; ++ tmp_ep->ep = ep; ++ ep_array[i] = tmp_ep; ++ return SCH_SUCCESS; ++ } ++ } ++ return SCH_FAIL; ++} ++ ++int count_ss_bw(int is_in, int ep_type, int maxp, int interval, int burst, int mult, int offset, int repeat ++ , int td_size){ ++ int i, j, k; ++ int bw_required[3]; ++ int final_bw_required; ++ int bw_required_per_repeat; ++ int tmp_bw_required; ++ struct sch_ep *cur_sch_ep; ++ struct sch_ep **ep_array; ++ int cur_offset; ++ int cur_ep_offset; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int ep_repeat; ++ int ep_mult; ++ ++ if(is_in){ ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else{ ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ ++ bw_required[0] = 0; ++ bw_required[1] = 0; ++ bw_required[2] = 0; ++ ++ if(repeat == 0){ ++ final_bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_mult); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ final_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ final_bw_required += td_size; ++ } ++ else{ ++ bw_required_per_repeat = maxp * (burst+1); ++ for(j=0; j<=mult; j++){ ++ tmp_bw_required = 0; ++ cur_offset = offset+(j*repeat); ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = ep_array[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_interval = cur_sch_ep->interval; ++ ep_offset = cur_sch_ep->offset; ++ if(cur_sch_ep->repeat == 0){ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ else{ ++ ep_repeat = cur_sch_ep->repeat; ++ ep_mult = cur_sch_ep->mult; ++ for(k=0; k<=ep_mult; k++){ ++ cur_ep_offset = ep_offset+(k*ep_repeat); ++ if(ep_interval >= interval){ ++ tmp_offset = cur_ep_offset + ep_interval - cur_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = cur_offset + interval - cur_ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset % tmp_interval == 0){ ++ tmp_bw_required += cur_sch_ep->bw_cost; ++ break; ++ } ++ } ++ } ++ } ++ bw_required[j] = tmp_bw_required; ++ } ++ final_bw_required = SS_BW_BOUND; ++ for(j=0; j<=mult; j++){ ++ if(bw_required[j] < final_bw_required){ ++ final_bw_required = bw_required[j]; ++ } ++ } ++ final_bw_required += bw_required_per_repeat; ++ } ++ return final_bw_required; ++} ++ ++int count_hs_bw(int ep_type, int maxp, int interval, int offset, int td_size){ ++ int i; ++ int bw_required; ++ struct sch_ep *cur_sch_ep; ++ int tmp_offset; ++ int tmp_interval; ++ int ep_offset; ++ int ep_interval; ++ int cur_tt_isoc_interval; //for isoc tt check ++ ++ bw_required = 0; ++ for(i=0; i<MAX_EP_NUM; i++){ ++ ++ cur_sch_ep = (struct sch_ep *)hs_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + cur_tt_isoc_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ } ++ else{ ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += td_size; ++ return bw_required; ++} ++ ++int count_tt_isoc_bw(int is_in, int maxp, int interval, int offset, int td_size){ ++ char is_cs; ++ int mframe_idx, frame_idx, s_frame, s_mframe, cur_mframe; ++ int bw_required, max_bw; ++ int ss_cs_count; ++ int cs_mframe; ++ int max_frame; ++ int i,j; ++ struct sch_ep *cur_sch_ep; ++ int ep_offset; ++ int ep_interval; ++ int ep_cs_count; ++ int tt_isoc_interval; //for isoc tt check ++ int cur_tt_isoc_interval; //for isoc tt check ++ int tmp_offset; ++ int tmp_interval; ++ ++ is_cs = 0; ++ ++ tt_isoc_interval = interval<<3; //frame to mframe ++ if(is_in){ ++ is_cs = 1; ++ } ++ s_frame = offset/8; ++ s_mframe = offset%8; ++ ss_cs_count = (maxp + (188 - 1))/188; ++ if(is_cs){ ++ cs_mframe = offset%8 + 2 + ss_cs_count; ++ if (cs_mframe <= 6) ++ ss_cs_count += 2; ++ else if (cs_mframe == 7) ++ ss_cs_count++; ++ else if (cs_mframe > 8) ++ return -1; ++ } ++ max_bw = 0; ++ if(is_in){ ++ i=2; ++ } ++ for(cur_mframe = offset+i; i<ss_cs_count; cur_mframe++, i++){ ++ bw_required = 0; ++ for(j=0; j<MAX_EP_NUM; j++){ ++ cur_sch_ep = (struct sch_ep *)hs_eps[j]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(cur_sch_ep->isTT && cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //isoc tt ++ //check if mframe offset overlap ++ //if overlap, add 188 to the bw ++ cur_tt_isoc_interval = ep_interval<<3; ++ if(cur_tt_isoc_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+cur_tt_isoc_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = cur_tt_isoc_interval; ++ } ++ if(cur_sch_ep->is_in){ ++ if((tmp_offset%tmp_interval >=2) && (tmp_offset%tmp_interval <= cur_sch_ep->cs_count)){ ++ bw_required += 188; ++ } ++ } ++ else{ ++ if(tmp_offset%tmp_interval <= cur_sch_ep->cs_count){ ++ bw_required += 188; ++ } ++ } ++ ++ } ++ else if(cur_sch_ep->ep_type == USB_EP_INT || cur_sch_ep->ep_type == USB_EP_ISOC){ ++ //check if mframe ++ if(ep_interval >= tt_isoc_interval){ ++ tmp_offset = (ep_offset+ep_interval) - cur_mframe; ++ tmp_interval = tt_isoc_interval; ++ } ++ else{ ++ tmp_offset = (cur_mframe+tt_isoc_interval) - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ if(tmp_offset%tmp_interval == 0){ ++ bw_required += cur_sch_ep->bw_cost; ++ } ++ } ++ } ++ bw_required += 188; ++ if(bw_required > max_bw){ ++ max_bw = bw_required; ++ } ++ } ++ return max_bw; ++} ++ ++int count_tt_intr_bw(int interval, int frame_offset){ ++ //check all eps in tt_intr_eps ++ int ret; ++ int i,j; ++ int ep_offset; ++ int ep_interval; ++ int tmp_offset; ++ int tmp_interval; ++ ret = SCH_SUCCESS; ++ struct sch_ep *cur_sch_ep; ++ ++ for(i=0; i<MAX_EP_NUM; i++){ ++ cur_sch_ep = (struct sch_ep *)tt_intr_eps[i]; ++ if(cur_sch_ep == NULL){ ++ continue; ++ } ++ ep_offset = cur_sch_ep->offset; ++ ep_interval = cur_sch_ep->interval; ++ if(ep_interval >= interval){ ++ tmp_offset = ep_offset + ep_interval - frame_offset; ++ tmp_interval = interval; ++ } ++ else{ ++ tmp_offset = frame_offset + interval - ep_offset; ++ tmp_interval = ep_interval; ++ } ++ ++ if(tmp_offset%tmp_interval==0){ ++ return SCH_FAIL; ++ } ++ } ++ return SCH_SUCCESS; ++} ++ ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep){ ++ int i; ++ struct sch_ep **ep_array; ++ struct sch_ep *cur_ep; ++ ++ if (is_in && dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_in_eps; ++ } ++ else if (dev_speed == USB_SPEED_SUPER) { ++ ep_array = (struct sch_ep **)ss_out_eps; ++ } ++ else if (dev_speed == USB_SPEED_HIGH || (isTT && ep_type == USB_EP_ISOC)) { ++ ep_array = (struct sch_ep **)hs_eps; ++ } ++ else { ++ ep_array = (struct sch_ep **)tt_intr_eps; ++ } ++ for (i = 0; i < MAX_EP_NUM; i++) { ++ cur_ep = (struct sch_ep *)ep_array[i]; ++ if(cur_ep != NULL && cur_ep->ep == ep){ ++ ep_array[i] = NULL; ++ return cur_ep; ++ } ++ } ++ return NULL; ++} ++ ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep){ ++ mtk_u32 bPkts = 0; ++ mtk_u32 bCsCount = 0; ++ mtk_u32 bBm = 1; ++ mtk_u32 bOffset = 0; ++ mtk_u32 bRepeat = 0; ++ int ret; ++ struct mtk_xhci_ep_ctx *temp_ep_ctx; ++ int td_size; ++ int mframe_idx, frame_idx; ++ int bw_cost; ++ int cur_bw, best_bw, best_bw_idx,repeat, max_repeat, best_bw_repeat; ++ int cur_offset, cs_mframe; ++ int break_out; ++ int frame_interval; ++ ++ printk(KERN_ERR "add_ep parameters, dev_speed %d, is_in %d, isTT %d, ep_type %d, maxp %d, interval %d, burst %d, mult %d, ep 0x%x, ep_ctx 0x%x, sch_ep 0x%x\n", dev_speed, is_in, isTT, ep_type, maxp ++ , interval, burst, mult, ep, ep_ctx, sch_ep); ++ if(isTT && ep_type == USB_EP_INT && ((dev_speed == USB_SPEED_LOW) || (dev_speed == USB_SPEED_FULL))){ ++ frame_interval = interval >> 3; ++ for(frame_idx=0; frame_idx<frame_interval; frame_idx++){ ++ printk(KERN_ERR "check tt_intr_bw interval %d, frame_idx %d\n", frame_interval, frame_idx); ++ if(count_tt_intr_bw(frame_interval, frame_idx) == SCH_SUCCESS){ ++ printk(KERN_ERR "check OK............\n"); ++ bOffset = frame_idx<<3; ++ bPkts = 1; ++ bCsCount = 3; ++ bw_cost = maxp; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, frame_interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, maxp, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ break; ++ } ++ } ++ } ++ else if(isTT && ep_type == USB_EP_ISOC){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp; ++ break_out = 0; ++ frame_interval = interval>>3; ++ for(frame_idx=0; frame_idx<frame_interval && !break_out; frame_idx++){ ++ for(mframe_idx=0; mframe_idx<8; mframe_idx++){ ++ cur_offset = (frame_idx*8) + mframe_idx; ++ cur_bw = count_tt_isoc_bw(is_in, maxp, frame_interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = 1; ++ bCsCount = (maxp + (188 - 1)) / 188; ++ if(is_in){ ++ cs_mframe = bOffset%8 + 2 + bCsCount; ++ if (cs_mframe <= 6) ++ bCsCount += 2; ++ else if (cs_mframe == 7) ++ bCsCount++; ++ } ++ bw_cost = 188; ++ bRepeat = 0; ++ if(add_sch_ep( dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if((dev_speed == USB_SPEED_FULL || dev_speed == USB_SPEED_LOW) && ep_type == USB_EP_INT){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_FULL && ep_type == USB_EP_ISOC){ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ else if(dev_speed == USB_SPEED_HIGH && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = HS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp*(burst+1); ++ for(cur_offset = 0; cur_offset<interval; cur_offset++){ ++ cur_bw = count_hs_bw(ep_type, maxp, interval, cur_offset, td_size); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = cur_offset; ++ best_bw = cur_bw; ++ if(cur_bw == td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break; ++ } ++ } ++ } ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bPkts = burst + 1; ++ bCsCount = 0; ++ bw_cost = td_size; ++ bRepeat = 0; ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else if(dev_speed == USB_SPEED_SUPER && (ep_type == USB_EP_INT || ep_type == USB_EP_ISOC)){ ++ best_bw = SS_BW_BOUND; ++ best_bw_idx = -1; ++ cur_bw = 0; ++ td_size = maxp * (mult+1) * (burst+1); ++ if(mult == 0){ ++ max_repeat = 0; ++ } ++ else{ ++ max_repeat = (interval-1)/(mult+1); ++ } ++ break_out = 0; ++ for(frame_idx = 0; (frame_idx < interval) && !break_out; frame_idx++){ ++ for(repeat = max_repeat; repeat >= 0; repeat--){ ++ cur_bw = count_ss_bw(is_in, ep_type, maxp, interval, burst, mult, frame_idx ++ , repeat, td_size); ++ printk(KERN_ERR "count_ss_bw, frame_idx %d, repeat %d, td_size %d, result bw %d\n" ++ , frame_idx, repeat, td_size, cur_bw); ++ if(cur_bw > 0 && cur_bw < best_bw){ ++ best_bw_idx = frame_idx; ++ best_bw_repeat = repeat; ++ best_bw = cur_bw; ++ if(cur_bw <= td_size || cur_bw < (HS_BW_BOUND>>1)){ ++ break_out = 1; ++ break; ++ } ++ } ++ } ++ } ++ printk(KERN_ERR "final best idx %d, best repeat %d\n", best_bw_idx, best_bw_repeat); ++ if(best_bw_idx == -1){ ++ return SCH_FAIL; ++ } ++ else{ ++ bOffset = best_bw_idx; ++ bCsCount = 0; ++ bRepeat = best_bw_repeat; ++ if(bRepeat == 0){ ++ bw_cost = (burst+1)*(mult+1)*maxp; ++ bPkts = (burst+1)*(mult+1); ++ } ++ else{ ++ bw_cost = (burst+1)*maxp; ++ bPkts = (burst+1); ++ } ++ if(add_sch_ep(dev_speed, is_in, isTT, ep_type, maxp, interval, burst, mult ++ , bOffset, bRepeat, bPkts, bCsCount, bBm, bw_cost, ep, sch_ep) == SCH_FAIL){ ++ return SCH_FAIL; ++ } ++ ret = SCH_SUCCESS; ++ } ++ } ++ else{ ++ bPkts = 1; ++ ret = SCH_SUCCESS; ++ } ++ if(ret == SCH_SUCCESS){ ++ temp_ep_ctx = (struct mtk_xhci_ep_ctx *)ep_ctx; ++ temp_ep_ctx->reserved[0] |= (BPKTS(bPkts) | BCSCOUNT(bCsCount) | BBM(bBm)); ++ temp_ep_ctx->reserved[1] |= (BOFFSET(bOffset) | BREPEAT(bRepeat)); ++ ++ printk(KERN_DEBUG "[DBG] BPKTS: %x, BCSCOUNT: %x, BBM: %x\n", bPkts, bCsCount, bBm); ++ printk(KERN_DEBUG "[DBG] BOFFSET: %x, BREPEAT: %x\n", bOffset, bRepeat); ++ return SCH_SUCCESS; ++ } ++ else{ ++ return SCH_FAIL; ++ } ++} +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk-scheduler.h +@@ -0,0 +1,77 @@ ++#ifndef _XHCI_MTK_SCHEDULER_H ++#define _XHCI_MTK_SCHEDULER_H ++ ++#define MTK_SCH_NEW 1 ++ ++#define SCH_SUCCESS 1 ++#define SCH_FAIL 0 ++ ++#define MAX_EP_NUM 64 ++#define SS_BW_BOUND 51000 ++#define HS_BW_BOUND 6144 ++ ++#define USB_EP_CONTROL 0 ++#define USB_EP_ISOC 1 ++#define USB_EP_BULK 2 ++#define USB_EP_INT 3 ++ ++#define USB_SPEED_LOW 1 ++#define USB_SPEED_FULL 2 ++#define USB_SPEED_HIGH 3 ++#define USB_SPEED_SUPER 5 ++ ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++ ++ ++#if 1 ++typedef unsigned int mtk_u32; ++typedef unsigned long long mtk_u64; ++#endif ++ ++#define NULL ((void *)0) ++ ++struct mtk_xhci_ep_ctx { ++ mtk_u32 ep_info; ++ mtk_u32 ep_info2; ++ mtk_u64 deq; ++ mtk_u32 tx_info; ++ /* offset 0x14 - 0x1f reserved for HC internal use */ ++ mtk_u32 reserved[3]; ++}; ++ ++ ++struct sch_ep ++{ ++ //device info ++ int dev_speed; ++ int isTT; ++ //ep info ++ int is_in; ++ int ep_type; ++ int maxp; ++ int interval; ++ int burst; ++ int mult; ++ //scheduling info ++ int offset; ++ int repeat; ++ int pkts; ++ int cs_count; ++ int burst_mode; ++ //other ++ int bw_cost; //bandwidth cost in each repeat; including overhead ++ mtk_u32 *ep; //address of usb_endpoint pointer ++}; ++ ++int mtk_xhci_scheduler_init(void); ++int mtk_xhci_scheduler_add_ep(int dev_speed, int is_in, int isTT, int ep_type, int maxp, int interval, int burst ++ , int mult, mtk_u32 *ep, mtk_u32 *ep_ctx, struct sch_ep *sch_ep); ++struct sch_ep * mtk_xhci_scheduler_remove_ep(int dev_speed, int is_in, int isTT, int ep_type, mtk_u32 *ep); ++ ++ ++#endif +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.c +@@ -0,0 +1,265 @@ ++#include "xhci-mtk.h" ++#include "xhci-mtk-power.h" ++#include "xhci.h" ++#include "mtk-phy.h" ++#ifdef CONFIG_C60802_SUPPORT ++#include "mtk-phy-c60802.h" ++#endif ++#include "xhci-mtk-scheduler.h" ++#include <linux/kernel.h> /* printk() */ ++#include <linux/slab.h> ++#include <linux/delay.h> ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++ ++void setInitialReg(void ) ++{ ++ __u32 __iomem *addr; ++ u32 temp; ++ ++ /* set SSUSB DMA burst size to 128B */ ++ addr = SSUSB_U3_XHCI_BASE + SSUSB_HDMA_CFG; ++ temp = SSUSB_HDMA_CFG_MT7621_VALUE; ++ writel(temp, addr); ++ ++ /* extend U3 LTSSM Polling.LFPS timeout value */ ++ addr = SSUSB_U3_XHCI_BASE + U3_LTSSM_TIMING_PARAMETER3; ++ temp = U3_LTSSM_TIMING_PARAMETER3_VALUE; ++ writel(temp, addr); ++ ++ /* EOF */ ++ addr = SSUSB_U3_XHCI_BASE + SYNC_HS_EOF; ++ temp = SYNC_HS_EOF_VALUE; ++ writel(temp, addr); ++ ++#if defined (CONFIG_PERIODIC_ENP) ++ /* HSCH_CFG1: SCH2_FIFO_DEPTH */ ++ addr = SSUSB_U3_XHCI_BASE + HSCH_CFG1; ++ temp = readl(addr); ++ temp &= ~(0x3 << SCH2_FIFO_DEPTH_OFFSET); ++ writel(temp, addr); ++#endif ++ ++ /* Doorbell handling */ ++ addr = SIFSLV_IPPC + SSUSB_IP_SPAR0; ++ temp = 0x1; ++ writel(temp, addr); ++ ++ /* Set SW PLL Stable mode to 1 for U2 LPM device remote wakeup */ ++ /* Port 0 */ ++ addr = U2_PHY_BASE + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++ ++ /* Port 1 */ ++ addr = U2_PHY_BASE_P1 + U2_PHYD_CR1; ++ temp = readl(addr); ++ temp &= ~(0x3 << 18); ++ temp |= (1 << 18); ++ writel(temp, addr); ++} ++ ++ ++void setLatchSel(void){ ++ __u32 __iomem *latch_sel_addr; ++ u32 latch_sel_value; ++ latch_sel_addr = U3_PIPE_LATCH_SEL_ADD; ++ latch_sel_value = ((U3_PIPE_LATCH_TX)<<2) | (U3_PIPE_LATCH_RX); ++ writel(latch_sel_value, latch_sel_addr); ++} ++ ++void reinitIP(void){ ++ __u32 __iomem *ip_reset_addr; ++ u32 ip_reset_value; ++ ++ enableAllClockPower(); ++ mtk_xhci_scheduler_init(); ++} ++ ++void dbg_prb_out(void){ ++ mtk_probe_init(0x0f0f0f0f); ++ mtk_probe_out(0xffffffff); ++ mtk_probe_out(0x01010101); ++ mtk_probe_out(0x02020202); ++ mtk_probe_out(0x04040404); ++ mtk_probe_out(0x08080808); ++ mtk_probe_out(0x10101010); ++ mtk_probe_out(0x20202020); ++ mtk_probe_out(0x40404040); ++ mtk_probe_out(0x80808080); ++ mtk_probe_out(0x55555555); ++ mtk_probe_out(0xaaaaaaaa); ++} ++ ++ ++ ++/////////////////////////////////////////////////////////////////////////////// ++ ++#define RET_SUCCESS 0 ++#define RET_FAIL 1 ++ ++static int dbg_u3w(int argc, char**argv) ++{ ++ int u4TimingValue; ++ char u1TimingValue; ++ int u4TimingAddress; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: address value\n"); ++ return RET_FAIL; ++ } ++ u3phy_init(); ++ ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ u4TimingValue = (int)simple_strtol(argv[2], &argv[2], 16); ++ u1TimingValue = u4TimingValue & 0xff; ++ /* access MMIO directly */ ++ writel(u1TimingValue, u4TimingAddress); ++ printk(KERN_ERR "Write done\n"); ++ return RET_SUCCESS; ++ ++} ++ ++static int dbg_u3r(int argc, char**argv) ++{ ++ char u1ReadTimingValue; ++ int u4TimingAddress; ++ if (argc<2) ++ { ++ printk(KERN_ERR "Arg: address\n"); ++ return 0; ++ } ++ u3phy_init(); ++ mdelay(500); ++ u4TimingAddress = (int)simple_strtol(argv[1], &argv[1], 16); ++ /* access MMIO directly */ ++ u1ReadTimingValue = readl(u4TimingAddress); ++ printk(KERN_ERR "Value = 0x%x\n", u1ReadTimingValue); ++ return 0; ++} ++ ++static int dbg_u3init(int argc, char**argv) ++{ ++ int ret; ++ ret = u3phy_init(); ++ printk(KERN_ERR "phy registers and operations initial done\n"); ++ if(u3phy_ops->u2_slew_rate_calibration){ ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ if(u3phy_ops->init(u3phy) == PHY_TRUE) ++ return RET_SUCCESS; ++ return RET_FAIL; ++} ++ ++void dbg_setU1U2(int argc, char**argv){ ++ struct xhci_hcd *xhci; ++ int u1_value; ++ int u2_value; ++ u32 port_id, temp; ++ u32 __iomem *addr; ++ ++ if (argc<3) ++ { ++ printk(KERN_ERR "Arg: u1value u2value\n"); ++ return RET_FAIL; ++ } ++ ++ u1_value = (int)simple_strtol(argv[1], &argv[1], 10); ++ u2_value = (int)simple_strtol(argv[2], &argv[2], 10); ++ addr = (SSUSB_U3_XHCI_BASE + 0x424); ++ temp = readl(addr); ++ temp = temp & (~(0x0000ffff)); ++ temp = temp | u1_value | (u2_value<<8); ++ writel(temp, addr); ++} ++/////////////////////////////////////////////////////////////////////////////// ++ ++int call_function(char *buf) ++{ ++ int i; ++ int argc; ++ char *argv[80]; ++ ++ argc = 0; ++ do ++ { ++ argv[argc] = strsep(&buf, " "); ++ printk(KERN_DEBUG "[%d] %s\r\n", argc, argv[argc]); ++ argc++; ++ } while (buf); ++ if (!strcmp("dbg.r", argv[0])) ++ dbg_prb_out(); ++ else if (!strcmp("dbg.u3w", argv[0])) ++ dbg_u3w(argc, argv); ++ else if (!strcmp("dbg.u3r", argv[0])) ++ dbg_u3r(argc, argv); ++ else if (!strcmp("dbg.u3i", argv[0])) ++ dbg_u3init(argc, argv); ++ else if (!strcmp("pw.u1u2", argv[0])) ++ dbg_setU1U2(argc, argv); ++ return 0; ++} ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg) ++{ ++ char w_buf[200]; ++ char r_buf[200] = "this is a test"; ++ int len = 200; ++ ++ switch (cmd) { ++ case IOCTL_READ: ++ copy_to_user((char *) arg, r_buf, len); ++ printk(KERN_DEBUG "IOCTL_READ: %s\r\n", r_buf); ++ break; ++ case IOCTL_WRITE: ++ copy_from_user(w_buf, (char *) arg, len); ++ printk(KERN_DEBUG "IOCTL_WRITE: %s\r\n", w_buf); ++ ++ //invoke function ++ return call_function(w_buf); ++ break; ++ default: ++ return -ENOTTY; ++ } ++ ++ return len; ++} ++ ++int xhci_mtk_test_open(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test open: successful\n"); ++ return 0; ++} ++ ++int xhci_mtk_test_release(struct inode *inode, struct file *file) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test release: successful\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test read: returning zero bytes\n"); ++ return 0; ++} ++ ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos) ++{ ++ ++ printk(KERN_DEBUG "xhci_mtk_test write: accepting zero bytes\n"); ++ return 0; ++} ++ ++ ++ ++ +--- /dev/null ++++ b/drivers/usb/host/xhci-mtk.h +@@ -0,0 +1,120 @@ ++#ifndef _XHCI_MTK_H ++#define _XHCI_MTK_H ++ ++#include <linux/usb.h> ++#include "xhci.h" ++ ++#define SSUSB_U3_XHCI_BASE 0xBE1C0000 ++#define SSUSB_U3_MAC_BASE 0xBE1C2400 ++#define SSUSB_U3_SYS_BASE 0xBE1C2600 ++#define SSUSB_U2_SYS_BASE 0xBE1C3400 ++#define SSUB_SIF_SLV_TOP 0xBE1D0000 ++#define SIFSLV_IPPC (SSUB_SIF_SLV_TOP + 0x700) ++ ++#define U3_PIPE_LATCH_SEL_ADD SSUSB_U3_MAC_BASE + 0x130 ++#define U3_PIPE_LATCH_TX 0 ++#define U3_PIPE_LATCH_RX 0 ++ ++#define U3_UX_EXIT_LFPS_TIMING_PAR 0xa0 ++#define U3_REF_CK_PAR 0xb0 ++#define U3_RX_UX_EXIT_LFPS_REF_OFFSET 8 ++#define U3_RX_UX_EXIT_LFPS_REF 3 ++#define U3_REF_CK_VAL 10 ++ ++#define U3_TIMING_PULSE_CTRL 0xb4 ++#define CNT_1US_VALUE 63 //62.5MHz:63, 70MHz:70, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define USB20_TIMING_PARAMETER 0x40 ++#define TIME_VALUE_1US 63 //62.5MHz:63, 80MHz:80, 100MHz:100, 125MHz:125 ++ ++#define LINK_PM_TIMER 0x8 ++#define PM_LC_TIMEOUT_VALUE 3 ++ ++#define XHCI_IMOD 0x624 ++#define XHCI_IMOD_MT7621_VALUE 0x10 ++ ++#define SSUSB_HDMA_CFG 0x950 ++#define SSUSB_HDMA_CFG_MT7621_VALUE 0x10E0E0C ++ ++#define U3_LTSSM_TIMING_PARAMETER3 0x2514 ++#define U3_LTSSM_TIMING_PARAMETER3_VALUE 0x3E8012C ++ ++#define U2_PHYD_CR1 0x64 ++ ++#define SSUSB_IP_SPAR0 0xC8 ++ ++#define SYNC_HS_EOF 0x938 ++#define SYNC_HS_EOF_VALUE 0x201F3 ++ ++#define HSCH_CFG1 0x960 ++#define SCH2_FIFO_DEPTH_OFFSET 16 ++ ++ ++#define SSUSB_IP_PW_CTRL (SIFSLV_IPPC+0x0) ++#define SSUSB_IP_SW_RST (1<<0) ++#define SSUSB_IP_PW_CTRL_1 (SIFSLV_IPPC+0x4) ++#define SSUSB_IP_PDN (1<<0) ++#define SSUSB_U3_CTRL(p) (SIFSLV_IPPC+0x30+(p*0x08)) ++#define SSUSB_U3_PORT_DIS (1<<0) ++#define SSUSB_U3_PORT_PDN (1<<1) ++#define SSUSB_U3_PORT_HOST_SEL (1<<2) ++#define SSUSB_U3_PORT_CKBG_EN (1<<3) ++#define SSUSB_U3_PORT_MAC_RST (1<<4) ++#define SSUSB_U3_PORT_PHYD_RST (1<<5) ++#define SSUSB_U2_CTRL(p) (SIFSLV_IPPC+(0x50)+(p*0x08)) ++#define SSUSB_U2_PORT_DIS (1<<0) ++#define SSUSB_U2_PORT_PDN (1<<1) ++#define SSUSB_U2_PORT_HOST_SEL (1<<2) ++#define SSUSB_U2_PORT_CKBG_EN (1<<3) ++#define SSUSB_U2_PORT_MAC_RST (1<<4) ++#define SSUSB_U2_PORT_PHYD_RST (1<<5) ++#define SSUSB_IP_CAP (SIFSLV_IPPC+0x024) ++ ++#define SSUSB_U3_PORT_NUM(p) (p & 0xff) ++#define SSUSB_U2_PORT_NUM(p) ((p>>8) & 0xff) ++ ++ ++#define XHCI_MTK_TEST_MAJOR 234 ++#define DEVICE_NAME "xhci_mtk_test" ++ ++#define CLI_MAGIC 'CLI' ++#define IOCTL_READ _IOR(CLI_MAGIC, 0, int) ++#define IOCTL_WRITE _IOW(CLI_MAGIC, 1, int) ++ ++void reinitIP(void); ++void setInitialReg(void); ++void dbg_prb_out(void); ++int call_function(char *buf); ++ ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++int xhci_mtk_test_open(struct inode *inode, struct file *file); ++int xhci_mtk_test_release(struct inode *inode, struct file *file); ++ssize_t xhci_mtk_test_read(struct file *file, char *buf, size_t count, loff_t *ptr); ++ssize_t xhci_mtk_test_write(struct file *file, const char *buf, size_t count, loff_t * ppos); ++ ++/* ++ mediatek probe out ++*/ ++/************************************************************************************/ ++ ++#define SW_PRB_OUT_ADDR (SIFSLV_IPPC+0xc0) ++#define PRB_MODULE_SEL_ADDR (SIFSLV_IPPC+0xbc) ++ ++static inline void mtk_probe_init(const u32 byte){ ++ __u32 __iomem *ptr = (__u32 __iomem *) PRB_MODULE_SEL_ADDR; ++ writel(byte, ptr); ++} ++ ++static inline void mtk_probe_out(const u32 value){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ writel(value, ptr); ++} ++ ++static inline u32 mtk_probe_value(void){ ++ __u32 __iomem *ptr = (__u32 __iomem *) SW_PRB_OUT_ADDR; ++ ++ return readl(ptr); ++} ++ ++ ++#endif +--- a/drivers/usb/host/xhci-plat.c ++++ b/drivers/usb/host/xhci-plat.c +@@ -25,6 +25,13 @@ static void xhci_plat_quirks(struct devi + * dev struct in order to setup MSI + */ + xhci->quirks |= XHCI_PLAT; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ /* MTK host controller gives a spurious successful event after a ++ * short transfer. Ignore it. ++ */ ++ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; ++ xhci->quirks |= XHCI_LPM_SUPPORT; ++#endif + } + + /* called during probe() after chip reset completes */ +@@ -96,20 +103,32 @@ static int xhci_plat_probe(struct platfo + + driver = &xhci_plat_xhci_driver; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ irq = XHC_IRQ; ++#else + irq = platform_get_irq(pdev, 0); ++#endif ++ + if (irq < 0) + return -ENODEV; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; ++#endif + + hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); + if (!hcd) + return -ENOMEM; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ hcd->rsrc_start = (uint32_t)XHC_IO_START; ++ hcd->rsrc_len = XHC_IO_LENGTH; ++#else + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); ++#endif + + if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, + driver->description)) { +--- a/drivers/usb/host/xhci-ring.c ++++ b/drivers/usb/host/xhci-ring.c +@@ -236,7 +236,6 @@ static void inc_enq(struct xhci_hcd *xhc + */ + if (!chain && !more_trbs_coming) + break; +- + /* If we're not dealing with 0.95 hardware or + * isoc rings on AMD 0.96 host, + * carry over the chain bit of the previous TRB +@@ -273,16 +272,20 @@ static void inc_enq(struct xhci_hcd *xhc + static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, + unsigned int num_trbs) + { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + int num_trbs_in_deq_seg; ++#endif + + if (ring->num_trbs_free < num_trbs) + return 0; + ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { + num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; + if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) + return 0; + } ++#endif + + return 1; + } +@@ -2910,6 +2913,7 @@ static int prepare_ring(struct xhci_hcd + next = ring->enqueue; + + while (last_trb(xhci, ring, ring->enq_seg, next)) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* If we're not dealing with 0.95 hardware or isoc rings + * on AMD 0.96 host, clear the chain bit. + */ +@@ -2919,7 +2923,9 @@ static int prepare_ring(struct xhci_hcd + next->link.control &= cpu_to_le32(~TRB_CHAIN); + else + next->link.control |= cpu_to_le32(TRB_CHAIN); +- ++#else ++ next->link.control &= cpu_to_le32(~TRB_CHAIN); ++#endif + wmb(); + next->link.control ^= cpu_to_le32(TRB_CYCLE); + +@@ -3049,6 +3055,9 @@ static void giveback_first_trb(struct xh + start_trb->field[3] |= cpu_to_le32(start_cycle); + else + start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ wmb(); ++#endif + xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); + } + +@@ -3108,6 +3117,29 @@ static u32 xhci_td_remainder(unsigned in + return (remainder >> 10) << 17; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length) ++{ ++ u32 max = 31; ++ int remainder, td_packet_count, packet_transferred; ++ ++ //0 for the last TRB ++ //FIXME: need to workaround if there is ZLP in this TD ++ if (td_running_total + trb_buffer_length == td_transfer_size) ++ return 0; ++ ++ //FIXME: need to take care of high-bandwidth (MAX_ESIT) ++ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp; ++ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); ++ remainder = td_packet_count - packet_transferred; ++ ++ if (remainder > max) ++ return max << 17; ++ else ++ return remainder << 17; ++} ++#endif ++ + /* + * For xHCI 1.0 host controllers, TD size is the number of max packet sized + * packets remaining in the TD (*not* including this TRB). +@@ -3245,6 +3277,7 @@ static int queue_bulk_sg_tx(struct xhci_ + } + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3254,6 +3287,13 @@ static int queue_bulk_sg_tx(struct xhci_ + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ if (num_trbs > 1) ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, ++ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len); ++#endif ++ ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3316,6 +3356,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd * + int running_total, trb_buff_len, ret; + unsigned int total_packet_count; + u64 addr; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + if (urb->num_sgs) + return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); +@@ -3341,6 +3384,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd * + running_total += TRB_MAX_BUFF_SIZE; + } + /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ default: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++ if((urb->transfer_flags & URB_ZERO_PACKET) ++ && ((urb->transfer_buffer_length % max_packet) == 0)){ ++ num_trbs++; ++ } ++#endif + + ret = prepare_transfer(xhci, xhci->devs[slot_id], + ep_index, urb->stream_id, +@@ -3400,6 +3462,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * + field |= TRB_ISP; + + /* Set the TRB length, TD size, and interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + urb->transfer_buffer_length - +@@ -3409,6 +3472,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd * + trb_buff_len, total_packet_count, urb, + num_trbs - 1); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +@@ -3498,7 +3565,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * + field |= 0x1; + + /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (1) { ++#else + if (xhci->hci_version == 0x100) { ++#endif + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) + field |= TRB_TX_TYPE(TRB_DATA_IN); +@@ -3522,7 +3593,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * + field = TRB_TYPE(TRB_DATA); + + length_field = TRB_LEN(urb->transfer_buffer_length) | ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + xhci_td_remainder(urb->transfer_buffer_length) | ++#else ++ //CC: MTK style, no scatter-gather for control transfer ++ 0 | ++#endif + TRB_INTR_TARGET(0); + if (urb->transfer_buffer_length > 0) { + if (setup->bRequestType & USB_DIR_IN) +@@ -3533,7 +3609,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * + length_field, + field | ep_ring->cycle_state); + } +- ++ + /* Save the DMA address of the last TRB in the TD */ + td->last_trb = ep_ring->enqueue; + +@@ -3645,6 +3721,9 @@ static int xhci_queue_isoc_tx(struct xhc + u64 start_addr, addr; + int i, j; + bool more_trbs_coming; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ int max_packet; ++#endif + + ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; + +@@ -3658,6 +3737,21 @@ static int xhci_queue_isoc_tx(struct xhc + start_trb = &ep_ring->enqueue->generic; + start_cycle = ep_ring->cycle_state; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ switch(urb->dev->speed){ ++ case USB_SPEED_SUPER: ++ max_packet = urb->ep->desc.wMaxPacketSize; ++ break; ++ case USB_SPEED_HIGH: ++ case USB_SPEED_FULL: ++ case USB_SPEED_LOW: ++ case USB_SPEED_WIRELESS: ++ case USB_SPEED_UNKNOWN: ++ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; ++ break; ++ } ++#endif ++ + urb_priv = urb->hcpriv; + /* Queue the first TRB, even if it's zero-length */ + for (i = 0; i < num_tds; i++) { +@@ -3729,9 +3823,13 @@ static int xhci_queue_isoc_tx(struct xhc + } else { + td->last_trb = ep_ring->enqueue; + field |= TRB_IOC; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ if (!(xhci->quirks & XHCI_AVOID_BEI)) { ++#else + if (xhci->hci_version == 0x100 && + !(xhci->quirks & + XHCI_AVOID_BEI)) { ++#endif + /* Set BEI bit except for the last td */ + if (i < num_tds - 1) + field |= TRB_BEI; +@@ -3746,6 +3844,7 @@ static int xhci_queue_isoc_tx(struct xhc + trb_buff_len = td_remain_len; + + /* Set the TRB length, TD size, & interrupter fields. */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->hci_version < 0x100) { + remainder = xhci_td_remainder( + td_len - running_total); +@@ -3755,6 +3854,10 @@ static int xhci_queue_isoc_tx(struct xhc + total_packet_count, urb, + (trbs_per_td - j - 1)); + } ++#else ++ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); ++#endif ++ + length_field = TRB_LEN(trb_buff_len) | + remainder | + TRB_INTR_TARGET(0); +--- a/drivers/usb/host/xhci.c ++++ b/drivers/usb/host/xhci.c +@@ -30,6 +30,16 @@ + + #include "xhci.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#include <asm/uaccess.h> ++#include <linux/dma-mapping.h> ++#include <linux/platform_device.h> ++#include "mtk-phy.h" ++#include "xhci-mtk-scheduler.h" ++#include "xhci-mtk-power.h" ++#include "xhci-mtk.h" ++#endif ++ + #define DRIVER_AUTHOR "Sarah Sharp" + #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" + +@@ -38,6 +48,18 @@ static int link_quirk; + module_param(link_quirk, int, S_IRUGO | S_IWUSR); + MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); ++static struct file_operations xhci_mtk_test_fops = { ++ .owner = THIS_MODULE, ++ .read = xhci_mtk_test_read, ++ .write = xhci_mtk_test_write, ++ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl, ++ .open = xhci_mtk_test_open, ++ .release = xhci_mtk_test_release, ++}; ++#endif ++ + /* TODO: copied from ehci-hcd.c - can this be refactored? */ + /* + * xhci_handshake - spin reading hc until handshake completes or fails +@@ -189,7 +211,7 @@ int xhci_reset(struct xhci_hcd *xhci) + return ret; + } + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + static int xhci_free_msi(struct xhci_hcd *xhci) + { + int i; +@@ -389,6 +411,7 @@ static int xhci_try_enable_msi(struct us + return ret; + } + hcd->irq = pdev->irq; ++ + return 0; + } + +@@ -430,6 +453,11 @@ static void compliance_mode_recovery(uns + xhci_dbg(xhci, "Attempting compliance mode recovery\n"); + hcd = xhci->shared_hcd; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (1 << 31); ++ xhci_writel(xhci, temp, xhci->usb3_ports[i]); ++#endif ++ + if (hcd->state == HC_STATE_SUSPENDED) + usb_hcd_resume_root_hub(hcd); + +@@ -478,6 +506,9 @@ bool xhci_compliance_mode_recovery_timer + { + const char *dmi_product_name, *dmi_sys_vendor; + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ return true; ++#endif + dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); + dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); + if (!dmi_product_name || !dmi_sys_vendor) +@@ -521,6 +552,10 @@ int xhci_init(struct usb_hcd *hcd) + } else { + xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ mtk_xhci_scheduler_init(); ++#endif + retval = xhci_mem_init(xhci, GFP_KERNEL); + xhci_dbg(xhci, "Finished xhci_init\n"); + +@@ -664,7 +699,11 @@ int xhci_run(struct usb_hcd *hcd) + xhci_dbg(xhci, "// Set the interrupt modulation register\n"); + temp = xhci_readl(xhci, &xhci->ir_set->irq_control); + temp &= ~ER_IRQ_INTERVAL_MASK; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ temp |= (u32) 16; ++#else + temp |= (u32) 160; ++#endif + xhci_writel(xhci, temp, &xhci->ir_set->irq_control); + + /* Set the HCD state before we enable the irqs */ +@@ -685,6 +724,9 @@ int xhci_run(struct usb_hcd *hcd) + xhci_queue_vendor_command(xhci, 0, 0, 0, + TRB_TYPE(TRB_NEC_GET_FW)); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ enableXhciAllPortPower(xhci); ++#endif + xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); + return 0; + } +@@ -1002,7 +1044,6 @@ int xhci_resume(struct xhci_hcd *xhci, b + + /* If restore operation fails, re-initialize the HC during resume */ + if ((temp & STS_SRE) || hibernated) { +- + if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && + !(xhci_all_ports_seen_u0(xhci))) { + del_timer_sync(&xhci->comp_mode_recovery_timer); +@@ -1586,6 +1627,13 @@ int xhci_drop_endpoint(struct usb_hcd *h + u32 drop_flag; + u32 new_add_flags, new_drop_flags, new_slot_info; + int ret; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep = NULL; ++ int isTT; ++ int ep_type; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) +@@ -1637,6 +1685,40 @@ int xhci_drop_endpoint(struct usb_hcd *h + + xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc) ++ , isTT, ep_type, (mtk_u32 *)ep); ++ if (sch_ep != NULL) { ++ kfree(sch_ep); ++ } ++ else { ++ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n"); ++ } ++#else ++ mtk_xhci_scheduler_remove_ep(xhci, udev, ep); ++#endif ++#endif ++ + xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", + (unsigned int) ep->desc.bEndpointAddress, + udev->slot_id, +@@ -1672,6 +1754,18 @@ int xhci_add_endpoint(struct usb_hcd *hc + u32 new_add_flags, new_drop_flags, new_slot_info; + struct xhci_virt_device *virt_dev; + int ret = 0; ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct xhci_ep_ctx *in_ep_ctx; ++#if MTK_SCH_NEW ++ struct sch_ep *sch_ep; ++ int isTT; ++ int ep_type; ++ int maxp = 0; ++ int burst = 0; ++ int mult = 0; ++ int interval; ++#endif ++#endif + + ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); + if (ret <= 0) { +@@ -1734,6 +1828,56 @@ int xhci_add_endpoint(struct usb_hcd *hc + return -ENOMEM; + } + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); ++#if MTK_SCH_NEW ++ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); ++ if ((slot_ctx->tt_info & 0xff) > 0) { ++ isTT = 1; ++ } ++ else { ++ isTT = 0; ++ } ++ if (usb_endpoint_xfer_int(&ep->desc)) { ++ ep_type = USB_EP_INT; ++ } ++ else if (usb_endpoint_xfer_isoc(&ep->desc)) { ++ ep_type = USB_EP_ISOC; ++ } ++ else if (usb_endpoint_xfer_bulk(&ep->desc)) { ++ ep_type = USB_EP_BULK; ++ } ++ else ++ ep_type = USB_EP_CONTROL; ++ ++ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH ++ || udev->speed == USB_SPEED_LOW) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->desc.wMaxPacketSize >> 11; ++ mult = 0; ++ } ++ else if (udev->speed == USB_SPEED_SUPER) { ++ maxp = ep->desc.wMaxPacketSize & 0x7FF; ++ burst = ep->ss_ep_comp.bMaxBurst; ++ mult = ep->ss_ep_comp.bmAttributes & 0x3; ++ } ++ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff)); ++ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL); ++ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc), ++ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep ++ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#else ++ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) { ++ xhci_err(xhci, "[MTK] not enough bandwidth\n"); ++ ++ return -ENOSPC; ++ } ++#endif ++#endif + ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); + new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); + +@@ -2697,7 +2841,7 @@ int xhci_check_bandwidth(struct usb_hcd + if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && + ctrl_ctx->drop_flags == 0) + return 0; +- ++ + xhci_dbg(xhci, "New Input Control Context:\n"); + slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); + xhci_dbg_ctx(xhci, virt_dev->in_ctx, +@@ -4233,10 +4377,14 @@ static u16 xhci_call_host_update_timeout + u16 *timeout) + { + if (state == USB3_LPM_U1) { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u1_timeout(udev, desc); + } else { ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + if (xhci->quirks & XHCI_INTEL_HOST) ++#endif + return xhci_calculate_intel_u2_timeout(udev, desc); + } + +@@ -4662,7 +4810,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, + /* Accept arbitrarily long scatter-gather lists */ + hcd->self.sg_tablesize = ~0; + /* XHCI controllers don't stop the ep queue on short packets :| */ ++#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + hcd->self.no_stop_on_short = 1; ++#endif + + if (usb_hcd_is_primary_hcd(hcd)) { + xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); +@@ -4731,6 +4881,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, + goto error; + xhci_dbg(xhci, "Reset complete\n"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ setInitialReg(); ++#endif ++ + temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); + if (HCC_64BIT_ADDR(temp)) { + xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); +@@ -4755,8 +4909,21 @@ MODULE_DESCRIPTION(DRIVER_DESC); + MODULE_AUTHOR(DRIVER_AUTHOR); + MODULE_LICENSE("GPL"); + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++static struct platform_device xhci_platform_dev = { ++ .name = "xhci-hcd", ++ .id = -1, ++ .dev = { ++ .coherent_dma_mask = 0xffffffff, ++ }, ++}; ++#endif ++ + static int __init xhci_hcd_init(void) + { ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ struct platform_device *pPlatformDev; ++#endif + int retval; + + retval = xhci_register_pci(); +@@ -4769,6 +4936,33 @@ static int __init xhci_hcd_init(void) + printk(KERN_DEBUG "Problem registering platform driver."); + goto unreg_pci; + } ++ ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops); ++ ++ u3phy_init(); ++ if (u3phy_ops->u2_slew_rate_calibration) { ++ u3phy_ops->u2_slew_rate_calibration(u3phy); ++ u3phy_ops->u2_slew_rate_calibration(u3phy_p1); ++ } ++ else{ ++ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); ++ } ++ u3phy_ops->init(u3phy); ++ reinitIP(); ++ ++ pPlatformDev = &xhci_platform_dev; ++ memset(pPlatformDev, 0, sizeof(struct platform_device)); ++ pPlatformDev->name = "xhci-hcd"; ++ pPlatformDev->id = -1; ++ pPlatformDev->dev.coherent_dma_mask = 0xffffffff; ++ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask; ++ ++ retval = platform_device_register(&xhci_platform_dev); ++ if (retval < 0) ++ xhci_unregister_plat(); ++#endif ++ + /* + * Check the compiler generated sizes of structures that must be laid + * out in specific ways for hardware access. +@@ -4786,6 +4980,7 @@ static int __init xhci_hcd_init(void) + BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); + /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ + BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); ++ + return 0; + unreg_pci: + xhci_unregister_pci(); +--- a/drivers/usb/host/xhci.h ++++ b/drivers/usb/host/xhci.h +@@ -29,9 +29,24 @@ + #include <linux/usb/hcd.h> + + /* Code sharing between pci-quirks and xhci hcd */ +-#include "xhci-ext-caps.h" ++#include "xhci-ext-caps.h" + #include "pci-quirks.h" + ++#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) ++#define XHC_IRQ (22 + 8) ++#define XHC_IO_START 0x1E1C0000 ++#define XHC_IO_LENGTH 0x10000 ++/* mtk scheduler bitmasks */ ++#define BPKTS(p) ((p) & 0x3f) ++#define BCSCOUNT(p) (((p) & 0x7) << 8) ++#define BBM(p) ((p) << 11) ++#define BOFFSET(p) ((p) & 0x3fff) ++#define BREPEAT(p) (((p) & 0x7fff) << 16) ++#endif ++ ++ ++ ++ + /* xHCI PCI Configuration Registers */ + #define XHCI_SBRN_OFFSET (0x60) + +@@ -1536,8 +1551,12 @@ struct xhci_hcd { + /* Compliance Mode Recovery Data */ + struct timer_list comp_mode_recovery_timer; + u32 port_status_u0; ++#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM ++#define COMP_MODE_RCVRY_MSECS 5000 ++#else + /* Compliance Mode Timer Triggered every 2 seconds */ + #define COMP_MODE_RCVRY_MSECS 2000 ++#endif + }; + + /* convert between an HCD pointer and the corresponding EHCI_HCD */ +@@ -1703,7 +1722,7 @@ void xhci_urb_free_priv(struct xhci_hcd + void xhci_free_command(struct xhci_hcd *xhci, + struct xhci_command *command); + +-#ifdef CONFIG_PCI ++#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) + /* xHCI PCI glue */ + int xhci_register_pci(void); + void xhci_unregister_pci(void); diff --git a/target/linux/ramips/patches-3.10/0500-spi-mt7621.patch b/target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch index b54c6e96dd..ec20066bf3 100644 --- a/target/linux/ramips/patches-3.10/0500-spi-mt7621.patch +++ b/target/linux/ramips/patches-3.10/0215-SPI-ralink-add-mt7621-support.patch @@ -1,6 +1,16 @@ +From 1a961f146e65e2716dbe9065baa4c0931fcb6b3e Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 05:34:11 +0000 +Subject: [PATCH 215/215] SPI: ralink: add mt7621 support + +Signed-off-by: John Crispin <blogic@openwrt.org> +--- + drivers/spi/spi-rt2880.c | 218 +++++++++++++++++++++++++++++++++++++++++++--- + 1 file changed, 205 insertions(+), 13 deletions(-) + --- a/drivers/spi/spi-rt2880.c +++ b/drivers/spi/spi-rt2880.c -@@ -21,8 +21,11 @@ +@@ -21,8 +21,13 @@ #include <linux/io.h> #include <linux/reset.h> #include <linux/spi/spi.h> @@ -9,10 +19,12 @@ +#include <ralink_regs.h> + ++#define SPI_BPW_MASK(bits) BIT((bits) - 1) ++ #define DRIVER_NAME "spi-rt2880" /* only one slave is supported*/ #define RALINK_NUM_CHIPSELECTS 1 -@@ -63,6 +66,25 @@ +@@ -63,6 +68,25 @@ /* SPIFIFOSTAT register bit field */ #define SPIFIFOSTAT_TXFULL BIT(17) @@ -38,7 +50,7 @@ struct rt2880_spi { struct spi_master *master; void __iomem *base; -@@ -70,6 +92,8 @@ struct rt2880_spi { +@@ -70,6 +94,8 @@ struct rt2880_spi { unsigned int speed; struct clk *clk; spinlock_t lock; @@ -47,7 +59,7 @@ }; static inline struct rt2880_spi *spidev_to_rt2880_spi(struct spi_device *spi) -@@ -149,6 +173,17 @@ static int rt2880_spi_baudrate_set(struc +@@ -149,6 +175,17 @@ static int rt2880_spi_baudrate_set(struc return 0; } @@ -65,7 +77,7 @@ /* * called only when no transfer is active on the bus */ -@@ -164,7 +199,7 @@ rt2880_spi_setup_transfer(struct spi_dev +@@ -164,7 +201,7 @@ rt2880_spi_setup_transfer(struct spi_dev if (rs->speed != speed) { dev_dbg(&spi->dev, "speed_hz:%u\n", speed); @@ -74,7 +86,7 @@ if (rc) return rc; } -@@ -180,6 +215,17 @@ static void rt2880_spi_set_cs(struct rt2 +@@ -180,6 +217,17 @@ static void rt2880_spi_set_cs(struct rt2 rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); } @@ -92,7 +104,7 @@ static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) { int i; -@@ -198,8 +244,26 @@ static inline int rt2880_spi_wait_till_r +@@ -198,8 +246,26 @@ static inline int rt2880_spi_wait_till_r return -ETIMEDOUT; } @@ -120,7 +132,7 @@ { struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); unsigned count = 0; -@@ -239,6 +303,100 @@ out: +@@ -239,6 +305,100 @@ out: return count; } @@ -221,7 +233,7 @@ static int rt2880_spi_transfer_one_message(struct spi_master *master, struct spi_message *m) { -@@ -280,25 +438,25 @@ static int rt2880_spi_transfer_one_messa +@@ -280,25 +440,25 @@ static int rt2880_spi_transfer_one_messa } if (!cs_active) { @@ -251,7 +263,7 @@ m->status = status; spi_finalize_current_message(master); -@@ -334,8 +492,41 @@ static void rt2880_spi_reset(struct rt28 +@@ -334,8 +494,41 @@ static void rt2880_spi_reset(struct rt28 rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); } @@ -293,7 +305,7 @@ struct spi_master *master; struct rt2880_spi *rs; unsigned long flags; -@@ -344,6 +535,10 @@ static int rt2880_spi_probe(struct platf +@@ -344,6 +537,10 @@ static int rt2880_spi_probe(struct platf int status = 0; struct clk *clk; @@ -304,7 +316,7 @@ r = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(base)) -@@ -382,12 +577,13 @@ static int rt2880_spi_probe(struct platf +@@ -382,12 +579,13 @@ static int rt2880_spi_probe(struct platf rs->clk = clk; rs->master = master; rs->sys_freq = clk_get_rate(rs->clk); @@ -319,7 +331,7 @@ return spi_register_master(master); } -@@ -408,12 +604,6 @@ static int rt2880_spi_remove(struct plat +@@ -408,12 +606,6 @@ static int rt2880_spi_remove(struct plat MODULE_ALIAS("platform:" DRIVER_NAME); diff --git a/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch b/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch new file mode 100644 index 0000000000..a3a5ec282d --- /dev/null +++ b/target/linux/ramips/patches-3.10/0216-NET-ralink-add-mt7621-SDK-ethernet-driver.patch @@ -0,0 +1,6045 @@ +From 6e10c9b7ab93cb105dc2779769c48949ebc60ee7 Mon Sep 17 00:00:00 2001 +From: John Crispin <blogic@openwrt.org> +Date: Sun, 16 Mar 2014 08:51:14 +0000 +Subject: [PATCH 1/3] foo + +--- + drivers/net/ethernet/raeth/Kconfig | 343 +++++++ + drivers/net/ethernet/raeth/Makefile | 7 + + drivers/net/ethernet/raeth/ethtool_readme.txt | 44 + + drivers/net/ethernet/raeth/mii_mgr.c | 166 ++++ + drivers/net/ethernet/raeth/ra2882ethreg.h | 1268 +++++++++++++++++++++++++ + drivers/net/ethernet/raeth/ra_ioctl.h | 92 ++ + drivers/net/ethernet/raeth/ra_mac.c | 93 ++ + drivers/net/ethernet/raeth/ra_mac.h | 35 + + drivers/net/ethernet/raeth/raether.c | 663 +++++++++++++ + drivers/net/ethernet/raeth/raether.h | 92 ++ + drivers/net/ethernet/raeth/raether_pdma.c | 202 ++++ + drivers/net/ethernet/raeth/raether_qdma.c | 805 ++++++++++++++++ + drivers/net/ethernet/ralink/gsw_mt7620a.c | 15 +- + drivers/net/ethernet/ralink/mt7530.c | 2 +- + drivers/net/ethernet/ralink/mt7621.c | 253 +++++ + drivers/net/ethernet/ralink/mt762x.c | 295 ++++++ + drivers/net/ethernet/ralink/mt762x.h | 38 + + drivers/net/ethernet/ralink/ralink_soc_eth.c | 25 +- + drivers/net/ethernet/ralink/ralink_soc_eth.h | 9 +- + drivers/net/ethernet/ralink/soc_mt7621.c | 5 +- + 20 files changed, 4429 insertions(+), 23 deletions(-) + create mode 100644 drivers/net/ethernet/raeth/Kconfig + create mode 100644 drivers/net/ethernet/raeth/Makefile + create mode 100644 drivers/net/ethernet/raeth/ethtool_readme.txt + create mode 100644 drivers/net/ethernet/raeth/mii_mgr.c + create mode 100644 drivers/net/ethernet/raeth/ra2882ethreg.h + create mode 100644 drivers/net/ethernet/raeth/ra_ioctl.h + create mode 100644 drivers/net/ethernet/raeth/ra_mac.c + create mode 100644 drivers/net/ethernet/raeth/ra_mac.h + create mode 100644 drivers/net/ethernet/raeth/raether.c + create mode 100644 drivers/net/ethernet/raeth/raether.h + create mode 100755 drivers/net/ethernet/raeth/raether_pdma.c + create mode 100644 drivers/net/ethernet/raeth/raether_qdma.c + create mode 100644 drivers/net/ethernet/ralink/mt7621.c + create mode 100644 drivers/net/ethernet/ralink/mt762x.c + create mode 100644 drivers/net/ethernet/ralink/mt762x.h + +--- /dev/null ++++ b/drivers/net/ethernet/raeth/Kconfig +@@ -0,0 +1,344 @@ ++ ++config RA_NAT_NONE ++ bool ++ default y ++ depends on RALINK ++ ++config MT7621_ASIC ++ bool ++ default y ++ depends on SOC_MT7621 ++ ++config RALINK_MT7621 ++ bool ++ default y ++ depends on SOC_MT7621 ++ ++config RAETH ++ tristate "Ralink GMAC" ++ depends on SOC_MT7621 ++ ---help--- ++ This driver supports Ralink gigabit ethernet family of ++ adapters. ++ ++config PDMA_NEW ++ bool ++ default y if (RALINK_MT7620 || RALINK_MT7621) ++ depends on RAETH ++ ++config RAETH_SCATTER_GATHER_RX_DMA ++ bool ++ default y if (RALINK_MT7620 || RALINK_MT7621) ++ depends on RAETH ++ ++ ++choice ++ prompt "Network BottomHalves" ++ depends on RAETH ++ default RA_NETWORK_WORKQUEUE_BH ++ ++ config RA_NETWORK_TASKLET_BH ++ bool "Tasklet" ++ ++ config RA_NETWORK_WORKQUEUE_BH ++ bool "Work Queue" ++ ++ config RAETH_NAPI ++ bool "NAPI" ++ ++endchoice ++ ++#config TASKLET_WORKQUEUE_SW ++# bool "Tasklet and Workqueue switch" ++# depends on RA_NETWORK_TASKLET_BH ++ ++config RAETH_SKB_RECYCLE_2K ++ bool "SKB Recycling" ++ depends on RAETH ++ ++config RAETH_SPECIAL_TAG ++ bool "Ralink Special Tag (0x810x)" ++ depends on RAETH && RT_3052_ESW ++ ++#config RAETH_JUMBOFRAME ++# bool "Jumbo Frame up to 4K bytes" ++# depends on RAETH && !(RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_MT7628) ++ ++config RAETH_CHECKSUM_OFFLOAD ++ bool "TCP/UDP/IP checksum offload" ++ default y ++ depends on RAETH && !RALINK_RT2880 ++ ++#config RAETH_SW_FC ++# bool "When TX ring is full, inform kernel stop transmit and stop RX handler" ++# default n ++# depends on RAETH ++ ++config 32B_DESC ++ bool "32bytes TX/RX description" ++ default n ++ depends on RAETH && (RALINK_MT7620 || RALINK_MT7621) ++ ---help--- ++ At this moment, you cannot enable 32B description with Multiple RX ring at the same time. ++ ++config RAETH_LRO ++ bool "LRO (Large Receive Offload )" ++ select INET_LRO ++ depends on RAETH && (RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621) ++ ++config RAETH_HW_VLAN_TX ++ bool "Transmit VLAN HW (DoubleVLAN is not supported)" ++ depends on RAETH && !(RALINK_RT5350 || RALINK_MT7628) ++ ---help--- ++ Please disable HW_VLAN_TX if you need double vlan ++ ++config RAETH_HW_VLAN_RX ++ bool "Receive VLAN HW (DoubleVLAN is not supported)" ++ depends on RAETH && RALINK_MT7621 ++ ---help--- ++ Please disable HW_VLAN_RX if you need double vlan ++ ++config RAETH_TSO ++ bool "TSOV4 (Tcp Segmentaton Offload)" ++ depends on (RAETH_HW_VLAN_TX && (RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620)) || RALINK_MT7621 ++ ++config RAETH_TSOV6 ++ bool "TSOV6 (Tcp Segmentaton Offload)" ++ depends on RAETH_TSO ++ ++config RAETH_RW_PDMAPTR_FROM_VAR ++ bool ++ default y if RALINK_RT6855A || RALINK_MT7620 ++ depends on RAETH ++ ++#config RAETH_QOS ++# bool "QoS Feature" ++# depends on RAETH && !RALINK_RT2880 && !RALINK_MT7620 && !RALINK_MT7621 && !RAETH_TSO ++ ++choice ++ prompt "QoS Type" ++ depends on RAETH_QOS ++ default DSCP_QOS_DSCP ++ ++config RAETH_QOS_DSCP_BASED ++ bool "DSCP-based" ++ depends on RAETH_QOS ++ ++config RAETH_QOS_VPRI_BASED ++ bool "VPRI-based" ++ depends on RAETH_QOS ++ ++endchoice ++ ++config RAETH_QDMA ++ bool "Choose QDMA instead PDMA" ++ default n ++ depends on RAETH && RALINK_MT7621 ++ ++choice ++ prompt "GMAC is connected to" ++ depends on RAETH ++ default GE1_RGMII_FORCE_1000 ++ ++config GE1_MII_FORCE_100 ++ bool "MII_FORCE_100 (10/100M Switch)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_MII_AN ++ bool "MII_AN (100Phy)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RVMII_FORCE_100 ++ bool "RvMII_FORCE_100 (CPU)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on (RALINK_RT2880 || RALINK_RT3883) ++ select RALINK_SPI ++ ++config GE1_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on (RALINK_MT7621) ++ select RT_3052_ESW ++ ++config GE1_TRGMII_FORCE_1200 ++ bool "TRGMII_FORCE_1200 (GigaSW, CPU)" ++ depends on (RALINK_MT7621) ++ select RT_3052_ESW ++ ++config GE1_RGMII_AN ++ bool "RGMII_AN (GigaPhy)" ++ depends on (RALINK_RT2880 || RALINK_RT3883 || RALINK_MT7621) ++ ++config GE1_RGMII_NONE ++ bool "NONE (NO CONNECT)" ++ depends on (RALINK_MT7621) ++ ++endchoice ++ ++config RT_3052_ESW ++ bool "Ralink Embedded Switch" ++ default y ++ depends on (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT5350 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620 || RALINK_MT7621 || RALINK_MT7628) ++ ++config LAN_WAN_SUPPORT ++ bool "LAN/WAN Partition" ++ depends on RAETH_ROUTER || RT_3052_ESW ++ ++choice ++ prompt "Switch Board Layout Type" ++ depends on LAN_WAN_SUPPORT || P5_RGMII_TO_MAC_MODE || GE1_RGMII_FORCE_1000 || GE1_TRGMII_FORCE_1200 || GE2_RGMII_FORCE_1000 ++ default WAN_AT_P0 ++ ++ config WAN_AT_P4 ++ bool "LLLL/W" ++ ++ config WAN_AT_P0 ++ bool "W/LLLL" ++endchoice ++ ++config RALINK_VISTA_BASIC ++ bool 'Vista Basic Logo for IC+ 175C' ++ depends on LAN_WAN_SUPPORT && (RALINK_RT2880 || RALINK_RT3883) ++ ++config ESW_DOUBLE_VLAN_TAG ++ bool ++ default y if RT_3052_ESW ++ ++config RAETH_HAS_PORT4 ++ bool "Port 4 Support" ++ depends on RAETH && RALINK_MT7620 ++choice ++ prompt "Target Mode" ++ depends on RAETH_HAS_PORT4 ++ default P4_RGMII_TO_MAC_MODE ++ ++ config P4_MAC_TO_PHY_MODE ++ bool "Giga_Phy (RGMII)" ++ config GE_RGMII_MT7530_P0_AN ++ bool "GE_RGMII_MT7530_P0_AN (MT7530 Internal GigaPhy)" ++ config GE_RGMII_MT7530_P4_AN ++ bool "GE_RGMII_MT7530_P4_AN (MT7530 Internal GigaPhy)" ++ config P4_RGMII_TO_MAC_MODE ++ bool "Giga_SW/iNIC (RGMII)" ++ config P4_MII_TO_MAC_MODE ++ bool "External_CPU (MII_RvMII)" ++ config P4_RMII_TO_MAC_MODE ++ bool "External_CPU (RvMII_MII)" ++endchoice ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex "Port4 Phy Address" ++ default 0x4 ++ depends on P4_MAC_TO_PHY_MODE ++ ++config RAETH_HAS_PORT5 ++ bool "Port 5 Support" ++ depends on RAETH && (RALINK_RT3052 || RALINK_RT3352 || RALINK_RT6855 || RALINK_RT6855A || RALINK_MT7620) ++choice ++ prompt "Target Mode" ++ depends on RAETH_HAS_PORT5 ++ default P5_RGMII_TO_MAC_MODE ++ ++ config P5_MAC_TO_PHY_MODE ++ bool "Giga_Phy (RGMII)" ++ config P5_RGMII_TO_MAC_MODE ++ bool "Giga_SW/iNIC (RGMII)" ++ config P5_RGMII_TO_MT7530_MODE ++ bool "MT7530 Giga_SW (RGMII)" ++ depends on RALINK_MT7620 ++ config P5_MII_TO_MAC_MODE ++ bool "External_CPU (MII_RvMII)" ++ config P5_RMII_TO_MAC_MODE ++ bool "External_CPU (RvMII_MII)" ++endchoice ++ ++config MAC_TO_GIGAPHY_MODE_ADDR ++ hex "GE1 Phy Address" ++ default 0x1F ++ depends on GE1_MII_AN || GE1_RGMII_AN ++ ++config MAC_TO_GIGAPHY_MODE_ADDR ++ hex "Port5 Phy Address" ++ default 0x5 ++ depends on P5_MAC_TO_PHY_MODE ++ ++config RAETH_GMAC2 ++ bool "GMAC2 Support" ++ depends on RAETH && (RALINK_RT3883 || RALINK_MT7621) ++ ++choice ++ prompt "GMAC2 is connected to" ++ depends on RAETH_GMAC2 ++ default GE2_RGMII_AN ++ ++config GE2_MII_FORCE_100 ++ bool "MII_FORCE_100 (10/100M Switch)" ++ depends on RAETH_GMAC2 ++ ++config GE2_MII_AN ++ bool "MII_AN (100Phy)" ++ depends on RAETH_GMAC2 ++ ++config GE2_RVMII_FORCE_100 ++ bool "RvMII_FORCE_100 (CPU)" ++ depends on RAETH_GMAC2 ++ ++config GE2_RGMII_FORCE_1000 ++ bool "RGMII_FORCE_1000 (GigaSW, CPU)" ++ depends on RAETH_GMAC2 ++ select RALINK_SPI ++ ++config GE2_RGMII_AN ++ bool "RGMII_AN (GigaPhy)" ++ depends on RAETH_GMAC2 ++ ++config GE2_INTERNAL_GPHY ++ bool "Internal GigaPHY" ++ depends on RAETH_GMAC2 ++ select LAN_WAN_SUPPORT ++ ++endchoice ++ ++config GE_RGMII_INTERNAL_P0_AN ++ bool ++ depends on GE2_INTERNAL_GPHY ++ default y if WAN_AT_P0 ++ ++config GE_RGMII_INTERNAL_P4_AN ++ bool ++ depends on GE2_INTERNAL_GPHY ++ default y if WAN_AT_P4 ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex ++ default 0 if GE_RGMII_INTERNAL_P0_AN ++ default 4 if GE_RGMII_INTERNAL_P4_AN ++ depends on GE_RGMII_INTERNAL_P0_AN || GE_RGMII_INTERNAL_P4_AN ++ ++config MAC_TO_GIGAPHY_MODE_ADDR2 ++ hex "GE2 Phy Address" ++ default 0x1E ++ depends on GE2_MII_AN || GE2_RGMII_AN ++ ++#force 100M ++config RAETH_ROUTER ++bool ++default y if GE1_MII_FORCE_100 || GE2_MII_FORCE_100 || GE1_RVMII_FORCE_100 || GE2_RVMII_FORCE_100 ++ ++#force 1000M ++config MAC_TO_MAC_MODE ++bool ++default y if GE1_RGMII_FORCE_1000 || GE2_RGMII_FORCE_1000 ++depends on (RALINK_RT2880 || RALINK_RT3883) ++ ++#AN ++config GIGAPHY ++bool ++default y if GE1_RGMII_AN || GE2_RGMII_AN ++ ++#AN ++config 100PHY ++bool ++default y if GE1_MII_AN || GE2_MII_AN +--- /dev/null ++++ b/drivers/net/ethernet/raeth/Makefile +@@ -0,0 +1,7 @@ ++obj-$(CONFIG_RAETH) += raeth.o ++raeth-objs := ra_mac.o mii_mgr.o ++raeth-objs += raether_pdma.o ++EXTRA_CFLAGS += -DWORKQUEUE_BH ++#EXTRA_CFLAGS += -DCONFIG_RAETH_MULTIPLE_RX_RING ++ ++raeth-objs += raether.o +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ethtool_readme.txt +@@ -0,0 +1,44 @@ ++ ++Ethtool readme for selecting different PHY address. ++ ++Before doing any ethtool command you should make sure the current PHY ++address is expected. The default PHY address is 1(port 1). ++ ++You can change current PHY address to X(0~4) by doing follow command: ++# echo X > /proc/rt2880/gmac ++ ++Ethtool command also would show the current PHY address as following. ++ ++# ethtool eth2 ++Settings for eth2: ++ Supported ports: [ TP MII ] ++ Supported link modes: 10baseT/Half 10baseT/Full ++ 100baseT/Half 100baseT/Full ++ Supports auto-negotiation: Yes ++ Advertised link modes: 10baseT/Half 10baseT/Full ++ 100baseT/Half 100baseT/Full ++ Advertised auto-negotiation: No ++ Speed: 10Mb/s ++ Duplex: Full ++ Port: MII ++ PHYAD: 1 ++ Transceiver: internal ++ Auto-negotiation: off ++ Current message level: 0x00000000 (0) ++ Link detected: no ++ ++ ++The "PHYAD" field shows the current PHY address. ++ ++ ++ ++Usage example ++1) show port1 info ++# echo 1 > /proc/rt2880/gmac # change phy address to 1 ++# ethtool eth2 ++ ++2) show port0 info ++# echo 0 > /proc/rt2880/gmac # change phy address to 0 ++# ethtool eth2 ++ ++ +--- /dev/null ++++ b/drivers/net/ethernet/raeth/mii_mgr.c +@@ -0,0 +1,166 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/netdevice.h> ++ ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#endif ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++ ++ ++#define PHY_CONTROL_0 0x0004 ++#define MDIO_PHY_CONTROL_0 (RALINK_ETH_SW_BASE + PHY_CONTROL_0) ++#define enable_mdio(x) ++ ++ ++u32 __mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data) ++{ ++ u32 volatile status = 0; ++ u32 rc = 0; ++ unsigned long volatile t_start = jiffies; ++ u32 volatile data = 0; ++ ++ /* We enable mdio gpio purpose register, and disable it when exit. */ ++ enable_mdio(1); ++ ++ // make sure previous read operation is complete ++ while (1) { ++ // 0 : Read/write operation complete ++ if(!( sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) ++ { ++ break; ++ } ++ else if (time_after(jiffies, t_start + 5*HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Read operation is ongoing !!\n"); ++ return rc; ++ } ++ } ++ ++ data = (0x01 << 16) | (0x02 << 18) | (phy_addr << 20) | (phy_register << 25); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ data |= (1<<31); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0); ++ ++ ++ // make sure read operation is complete ++ t_start = jiffies; ++ while (1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) { ++ status = sysRegRead(MDIO_PHY_CONTROL_0); ++ *read_data = (u32)(status & 0x0000FFFF); ++ ++ enable_mdio(0); ++ return 1; ++ } ++ else if (time_after(jiffies, t_start+5*HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Read operation is ongoing and Time Out!!\n"); ++ return 0; ++ } ++ } ++} ++ ++u32 __mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data) ++{ ++ unsigned long volatile t_start=jiffies; ++ u32 volatile data; ++ ++ enable_mdio(1); ++ ++ // make sure previous write operation is complete ++ while(1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) ++ { ++ break; ++ } ++ else if (time_after(jiffies, t_start + 5 * HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Write operation ongoing\n"); ++ return 0; ++ } ++ } ++ /*add 1 us delay to make sequencial write more robus*/ ++ udelay(1); ++ ++ data = (0x01 << 16)| (1<<18) | (phy_addr << 20) | (phy_register << 25) | write_data; ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); ++ data |= (1<<31); ++ sysRegWrite(MDIO_PHY_CONTROL_0, data); //start operation ++ //printk("\n Set Command [0x%08X] to PHY !!\n",MDIO_PHY_CONTROL_0); ++ ++ t_start = jiffies; ++ ++ // make sure write operation is complete ++ while (1) { ++ if (!(sysRegRead(MDIO_PHY_CONTROL_0) & (0x1 << 31))) //0 : Read/write operation complete ++ { ++ enable_mdio(0); ++ return 1; ++ } ++ else if (time_after(jiffies, t_start + 5 * HZ)) { ++ enable_mdio(0); ++ printk("\n MDIO Write operation Time Out\n"); ++ return 0; ++ } ++ } ++} ++ ++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data) ++{ ++ u32 low_word; ++ u32 high_word; ++ if(phy_addr==31) ++ { ++ //phase1: write page address phase ++ if(__mii_mgr_write(phy_addr, 0x1f, ((phy_register >> 6) & 0x3FF))) { ++ //phase2: write address & read low word phase ++ if(__mii_mgr_read(phy_addr, (phy_register >> 2) & 0xF, &low_word)) { ++ //phase3: write address & read high word phase ++ if(__mii_mgr_read(phy_addr, (0x1 << 4), &high_word)) { ++ *read_data = (high_word << 16) | (low_word & 0xFFFF); ++ return 1; ++ } ++ } ++ } ++ } else ++ { ++ if(__mii_mgr_read(phy_addr, phy_register, read_data)) { ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data) ++{ ++ if(phy_addr == 31) ++ { ++ //phase1: write page address phase ++ if(__mii_mgr_write(phy_addr, 0x1f, (phy_register >> 6) & 0x3FF)) { ++ //phase2: write address & read low word phase ++ if(__mii_mgr_write(phy_addr, ((phy_register >> 2) & 0xF), write_data & 0xFFFF)) { ++ //phase3: write address & read high word phase ++ if(__mii_mgr_write(phy_addr, (0x1 << 4), write_data >> 16)) { ++ return 1; ++ } ++ } ++ } ++ } else ++ { ++ if(__mii_mgr_write(phy_addr, phy_register, write_data)) { ++ return 1; ++ } ++ } ++ ++ return 0; ++} ++ ++EXPORT_SYMBOL(mii_mgr_write); ++EXPORT_SYMBOL(mii_mgr_read); +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra2882ethreg.h +@@ -0,0 +1,1268 @@ ++#ifndef RA2882ETHREG_H ++#define RA2882ETHREG_H ++ ++#include <linux/mii.h> // for struct mii_if_info in ra2882ethreg.h ++#include <linux/version.h> /* check linux version for 2.4 and 2.6 compatibility */ ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#endif ++#include "raether.h" ++ ++#ifdef WORKQUEUE_BH ++#include <linux/workqueue.h> ++#endif // WORKQUEUE_BH // ++#ifdef CONFIG_RAETH_LRO ++#include <linux/inet_lro.h> ++#endif ++ ++#define MAX_PACKET_SIZE 1514 ++#define MIN_PACKET_SIZE 60 ++ ++#define phys_to_bus(a) (a & 0x1FFFFFFF) ++ ++#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,36) ++#define BIT(x) ((1 << x)) ++#endif ++#define ETHER_ADDR_LEN 6 ++ ++/* Phy Vender ID list */ ++ ++#define EV_ICPLUS_PHY_ID0 0x0243 ++#define EV_ICPLUS_PHY_ID1 0x0D90 ++#define EV_MARVELL_PHY_ID0 0x0141 ++#define EV_MARVELL_PHY_ID1 0x0CC2 ++#define EV_VTSS_PHY_ID0 0x0007 ++#define EV_VTSS_PHY_ID1 0x0421 ++ ++/* ++ FE_INT_STATUS ++*/ ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ ++#define RX_COHERENT BIT(31) ++#define RX_DLY_INT BIT(30) ++#define TX_COHERENT BIT(29) ++#define TX_DLY_INT BIT(28) ++ ++#define RX_DONE_INT1 BIT(17) ++#define RX_DONE_INT0 BIT(16) ++ ++#define TX_DONE_INT3 BIT(3) ++#define TX_DONE_INT2 BIT(2) ++#define TX_DONE_INT1 BIT(1) ++#define TX_DONE_INT0 BIT(0) ++ ++#if defined (CONFIG_RALINK_MT7621) ++#define RLS_COHERENT BIT(29) ++#define RLS_DLY_INT BIT(28) ++#define RLS_DONE_INT BIT(0) ++#endif ++ ++#else ++//#define CNT_PPE_AF BIT(31) ++//#define CNT_GDM_AF BIT(29) ++#define PSE_P2_FC BIT(26) ++#define GDM_CRC_DROP BIT(25) ++#define PSE_BUF_DROP BIT(24) ++#define GDM_OTHER_DROP BIT(23) ++#define PSE_P1_FC BIT(22) ++#define PSE_P0_FC BIT(21) ++#define PSE_FQ_EMPTY BIT(20) ++#define GE1_STA_CHG BIT(18) ++#define TX_COHERENT BIT(17) ++#define RX_COHERENT BIT(16) ++ ++#define TX_DONE_INT3 BIT(11) ++#define TX_DONE_INT2 BIT(10) ++#define TX_DONE_INT1 BIT(9) ++#define TX_DONE_INT0 BIT(8) ++#define RX_DONE_INT1 RX_DONE_INT0 ++#define RX_DONE_INT0 BIT(2) ++#define TX_DLY_INT BIT(1) ++#define RX_DLY_INT BIT(0) ++#endif ++ ++#define FE_INT_ALL (TX_DONE_INT3 | TX_DONE_INT2 | \ ++ TX_DONE_INT1 | TX_DONE_INT0 | \ ++ RX_DONE_INT0 ) ++ ++#if defined (CONFIG_RALINK_MT7621) ++#define QFE_INT_ALL (RLS_DONE_INT | RX_DONE_INT0 | RX_DONE_INT1) ++#define QFE_INT_DLY_INIT (RLS_DLY_INT | RX_DLY_INT) ++ ++#define NUM_QDMA_PAGE 256 ++#define QDMA_PAGE_SIZE 2048 ++#endif ++/* ++ * SW_INT_STATUS ++ */ ++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++#define PORT0_QUEUE_FULL BIT(14) //port0 queue full ++#define PORT1_QUEUE_FULL BIT(15) //port1 queue full ++#define PORT2_QUEUE_FULL BIT(16) //port2 queue full ++#define PORT3_QUEUE_FULL BIT(17) //port3 queue full ++#define PORT4_QUEUE_FULL BIT(18) //port4 queue full ++#define PORT5_QUEUE_FULL BIT(19) //port5 queue full ++#define PORT6_QUEUE_FULL BIT(20) //port6 queue full ++#define SHARED_QUEUE_FULL BIT(23) //shared queue full ++#define QUEUE_EXHAUSTED BIT(24) //global queue is used up and all packets are dropped ++#define BC_STROM BIT(25) //the device is undergoing broadcast storm ++#define PORT_ST_CHG BIT(26) //Port status change ++#define UNSECURED_ALERT BIT(27) //Intruder alert ++#define ABNORMAL_ALERT BIT(28) //Abnormal ++ ++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x00) ++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x04) ++#define ESW_INT_ALL (PORT_ST_CHG) ++ ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) ++#define MIB_INT BIT(25) ++#define ACL_INT BIT(24) ++#define P5_LINK_CH BIT(5) ++#define P4_LINK_CH BIT(4) ++#define P3_LINK_CH BIT(3) ++#define P2_LINK_CH BIT(2) ++#define P1_LINK_CH BIT(1) ++#define P0_LINK_CH BIT(0) ++ ++#define RX_GOCT_CNT BIT(4) ++#define RX_GOOD_CNT BIT(6) ++#define TX_GOCT_CNT BIT(17) ++#define TX_GOOD_CNT BIT(19) ++ ++#define MSK_RX_GOCT_CNT BIT(4) ++#define MSK_RX_GOOD_CNT BIT(6) ++#define MSK_TX_GOCT_CNT BIT(17) ++#define MSK_TX_GOOD_CNT BIT(19) ++#define MSK_CNT_INT_ALL (MSK_RX_GOCT_CNT | MSK_RX_GOOD_CNT | MSK_TX_GOCT_CNT | MSK_TX_GOOD_CNT) ++//#define MSK_CNT_INT_ALL (MSK_RX_GOOD_CNT | MSK_TX_GOOD_CNT) ++ ++ ++#define ESW_IMR (RALINK_ETH_SW_BASE + 0x7000 + 0x8) ++#define ESW_ISR (RALINK_ETH_SW_BASE + 0x7000 + 0xC) ++#define ESW_INT_ALL (P0_LINK_CH | P1_LINK_CH | P2_LINK_CH | P3_LINK_CH | P4_LINK_CH | P5_LINK_CH | ACL_INT | MIB_INT) ++#define ESW_AISR (RALINK_ETH_SW_BASE + 0x8) ++#define ESW_P0_IntSn (RALINK_ETH_SW_BASE + 0x4004) ++#define ESW_P1_IntSn (RALINK_ETH_SW_BASE + 0x4104) ++#define ESW_P2_IntSn (RALINK_ETH_SW_BASE + 0x4204) ++#define ESW_P3_IntSn (RALINK_ETH_SW_BASE + 0x4304) ++#define ESW_P4_IntSn (RALINK_ETH_SW_BASE + 0x4404) ++#define ESW_P5_IntSn (RALINK_ETH_SW_BASE + 0x4504) ++#define ESW_P6_IntSn (RALINK_ETH_SW_BASE + 0x4604) ++#define ESW_P0_IntMn (RALINK_ETH_SW_BASE + 0x4008) ++#define ESW_P1_IntMn (RALINK_ETH_SW_BASE + 0x4108) ++#define ESW_P2_IntMn (RALINK_ETH_SW_BASE + 0x4208) ++#define ESW_P3_IntMn (RALINK_ETH_SW_BASE + 0x4308) ++#define ESW_P4_IntMn (RALINK_ETH_SW_BASE + 0x4408) ++#define ESW_P5_IntMn (RALINK_ETH_SW_BASE + 0x4508) ++#define ESW_P6_IntMn (RALINK_ETH_SW_BASE + 0x4608) ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define ESW_P7_IntSn (RALINK_ETH_SW_BASE + 0x4704) ++#define ESW_P7_IntMn (RALINK_ETH_SW_BASE + 0x4708) ++#endif ++ ++ ++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x7000) ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define ESW_PHY_POLLING (RALINK_ETH_SW_BASE + 0x0000) ++ ++#define P5_LINK_CH BIT(5) ++#define P4_LINK_CH BIT(4) ++#define P3_LINK_CH BIT(3) ++#define P2_LINK_CH BIT(2) ++#define P1_LINK_CH BIT(1) ++#define P0_LINK_CH BIT(0) ++ ++ ++#endif // CONFIG_RALINK_RT3052 || CONFIG_RALINK_RT3352 || CONFIG_RALINK_RT5350 || defined (CONFIG_RALINK_MT7628)// ++ ++#define RX_BUF_ALLOC_SIZE 2000 ++#define FASTPATH_HEADROOM 64 ++ ++#define ETHER_BUFFER_ALIGN 32 ///// Align on a cache line ++ ++#define ETHER_ALIGNED_RX_SKB_ADDR(addr) \ ++ ((((unsigned long)(addr) + ETHER_BUFFER_ALIGN - 1) & \ ++ ~(ETHER_BUFFER_ALIGN - 1)) - (unsigned long)(addr)) ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++typedef struct _PSEUDO_ADAPTER { ++ struct net_device *RaethDev; ++ struct net_device *PseudoDev; ++ struct net_device_stats stat; ++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/ ++ struct mii_if_info mii_info; ++#endif ++ ++} PSEUDO_ADAPTER, PPSEUDO_ADAPTER; ++ ++#define MAX_PSEUDO_ENTRY 1 ++#endif ++ ++ ++ ++/* Register Categories Definition */ ++#define RAFRAMEENGINE_OFFSET 0x0000 ++#define RAGDMA_OFFSET 0x0020 ++#define RAPSE_OFFSET 0x0040 ++#define RAGDMA2_OFFSET 0x0060 ++#define RACDMA_OFFSET 0x0080 ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ ++#define RAPDMA_OFFSET 0x0800 ++#define SDM_OFFSET 0x0C00 ++#else ++#define RAPDMA_OFFSET 0x0100 ++#endif ++#define RAPPE_OFFSET 0x0200 ++#define RACMTABLE_OFFSET 0x0400 ++#define RAPOLICYTABLE_OFFSET 0x1000 ++ ++ ++/* Register Map Detail */ ++/* RT3883 */ ++#define SYSCFG1 (RALINK_SYSCTL_BASE + 0x14) ++ ++#if defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++ ++/* 1. PDMA */ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x000) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x004) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x008) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x010) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x014) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x018) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x01C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x020) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x024) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x028) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x02C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x030) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x034) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x038) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x03C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x100) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x104) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x108) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x110) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x114) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x118) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x11C) ++ ++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x200) ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x204) ++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x208) ++#define PDMA_RST_CFG (PDMA_RST_IDX) ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20C) ++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x210) ++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x220) ++#define FE_INT_STATUS (INT_STATUS) ++#define INT_MASK (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x228) ++#define FE_INT_ENABLE (INT_MASK) ++#define PDMA_WRR (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280) ++#define PDMA_SCH_CFG (PDMA_WRR) ++ ++#define SDM_CON (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x00) //Switch DMA configuration ++#define SDM_RRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x04) //Switch DMA Rx Ring ++#define SDM_TRING (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x08) //Switch DMA Tx Ring ++#define SDM_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x0C) //Switch MAC address LSB ++#define SDM_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10) //Switch MAC Address MSB ++#define SDM_TPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x100) //Switch DMA Tx packet count ++#define SDM_TBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x104) //Switch DMA Tx byte count ++#define SDM_RPCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x108) //Switch DMA rx packet count ++#define SDM_RBCNT (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x10C) //Switch DMA rx byte count ++#define SDM_CS_ERR (RALINK_FRAME_ENGINE_BASE+SDM_OFFSET+0x110) //Switch DMA rx checksum error count ++ ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++ ++/* Old FE with New PDMA */ ++#define PDMA_RELATED 0x0800 ++/* 1. PDMA */ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x000) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x004) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x008) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x00C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x010) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x014) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x018) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x01C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x020) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x024) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x028) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x02C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x030) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x034) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x038) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x03C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x100) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x104) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x108) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x10C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x110) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x114) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x118) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x11C) ++ ++#define PDMA_INFO (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x200) ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x204) ++#define PDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x208) ++#define PDMA_RST_CFG (PDMA_RST_IDX) ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x20C) ++#define FREEQ_THRES (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x210) ++#define INT_STATUS (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x220) ++#define FE_INT_STATUS (INT_STATUS) ++#define INT_MASK (RALINK_FRAME_ENGINE_BASE + PDMA_RELATED+0x228) ++#define FE_INT_ENABLE (INT_MASK) ++#define SCH_Q01_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x280) ++#define SCH_Q23_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x284) ++ ++#define FE_GLO_CFG RALINK_FRAME_ENGINE_BASE + 0x00 ++#define FE_RST_GL RALINK_FRAME_ENGINE_BASE + 0x04 ++#define FE_INT_STATUS2 RALINK_FRAME_ENGINE_BASE + 0x08 ++#define FE_INT_ENABLE2 RALINK_FRAME_ENGINE_BASE + 0x0c ++//#define FC_DROP_STA RALINK_FRAME_ENGINE_BASE + 0x18 ++#define FOE_TS_T RALINK_FRAME_ENGINE_BASE + 0x10 ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define GDMA1_RELATED 0x0600 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++#elif defined (CONFIG_RALINK_MT7621) ++#define GDMA1_RELATED 0x0500 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++ ++#define GDMA2_RELATED 0x1500 ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C) ++#else ++#define GDMA1_RELATED 0x0020 ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x00) ++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x04) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x08) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x0C) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA1_RELATED + 0x10) ++ ++#define GDMA2_RELATED 0x0060 ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x00) ++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x04) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x08) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x0C) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE + GDMA2_RELATED + 0x10) ++#endif ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define PSE_RELATED 0x0500 ++#define PSE_FQFC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00) ++#define PSE_IQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04) ++#define PSE_QUE_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08) ++#else ++#define PSE_RELATED 0x0040 ++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x00) ++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x04) ++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x08) ++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x0C) ++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x10) ++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x14) ++#define GDMA2_OQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x18) ++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE + PSE_RELATED + 0x1C) ++#endif ++ ++ ++#if defined (CONFIG_RALINK_MT7620) ++#define CDMA_RELATED 0x0400 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x3FE4) ++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x3FE8) ++#define CKGCR (RALINK_ETH_SW_BASE + 0x3FF0) ++#elif defined (CONFIG_RALINK_MT7621) ++#define CDMA_RELATED 0x0400 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) //fake definition ++#define CDMP_IG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define CDMP_EG_CTRL (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04) ++#else ++#define CDMA_RELATED 0x0080 ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x00) ++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE + CDMA_RELATED + 0x04) ++#define SMACCR0 (RALINK_ETH_SW_BASE + 0x30E4) ++#define SMACCR1 (RALINK_ETH_SW_BASE + 0x30E8) ++#define CKGCR (RALINK_ETH_SW_BASE + 0x30F0) ++#endif ++ ++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x100) ++ ++ ++#if defined (CONFIG_RALINK_MT7621) ++/*kurtis: add QDMA define*/ ++ ++#define CLK_CFG_0 (RALINK_SYSCTL_BASE + 0x2C) ++#define PAD_RGMII2_MDIO_CFG (RALINK_SYSCTL_BASE + 0x58) ++ ++#define QDMA_RELATED 0x1800 ++#define QTX_CFG_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x000) ++#define QTX_SCH_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x004) ++#define QTX_HEAD_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x008) ++#define QTX_TAIL_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x00C) ++#define QTX_CFG_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x010) ++#define QTX_SCH_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x014) ++#define QTX_HEAD_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x018) ++#define QTX_TAIL_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x01C) ++#define QTX_CFG_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x020) ++#define QTX_SCH_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x024) ++#define QTX_HEAD_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x028) ++#define QTX_TAIL_2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x02C) ++#define QTX_CFG_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x030) ++#define QTX_SCH_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x034) ++#define QTX_HEAD_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x038) ++#define QTX_TAIL_3 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x03C) ++#define QTX_CFG_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x040) ++#define QTX_SCH_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x044) ++#define QTX_HEAD_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x048) ++#define QTX_TAIL_4 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x04C) ++#define QTX_CFG_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x050) ++#define QTX_SCH_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x054) ++#define QTX_HEAD_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x058) ++#define QTX_TAIL_5 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x05C) ++#define QTX_CFG_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x060) ++#define QTX_SCH_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x064) ++#define QTX_HEAD_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x068) ++#define QTX_TAIL_6 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x06C) ++#define QTX_CFG_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x070) ++#define QTX_SCH_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x074) ++#define QTX_HEAD_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x078) ++#define QTX_TAIL_7 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x07C) ++#define QTX_CFG_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x080) ++#define QTX_SCH_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x084) ++#define QTX_HEAD_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x088) ++#define QTX_TAIL_8 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x08C) ++#define QTX_CFG_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x090) ++#define QTX_SCH_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x094) ++#define QTX_HEAD_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x098) ++#define QTX_TAIL_9 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x09C) ++#define QTX_CFG_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A0) ++#define QTX_SCH_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A4) ++#define QTX_HEAD_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0A8) ++#define QTX_TAIL_10 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0AC) ++#define QTX_CFG_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B0) ++#define QTX_SCH_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B4) ++#define QTX_HEAD_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0B8) ++#define QTX_TAIL_11 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0BC) ++#define QTX_CFG_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C0) ++#define QTX_SCH_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C4) ++#define QTX_HEAD_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0C8) ++#define QTX_TAIL_12 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0CC) ++#define QTX_CFG_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D0) ++#define QTX_SCH_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D4) ++#define QTX_HEAD_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0D8) ++#define QTX_TAIL_13 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0DC) ++#define QTX_CFG_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E0) ++#define QTX_SCH_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E4) ++#define QTX_HEAD_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0E8) ++#define QTX_TAIL_14 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0EC) ++#define QTX_CFG_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F0) ++#define QTX_SCH_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F4) ++#define QTX_HEAD_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0F8) ++#define QTX_TAIL_15 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x0FC) ++#define QRX_BASE_PTR_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x100) ++#define QRX_MAX_CNT_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x104) ++#define QRX_CRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x108) ++#define QRX_DRX_IDX_0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x10C) ++#define QRX_BASE_PTR_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x110) ++#define QRX_MAX_CNT_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x114) ++#define QRX_CRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x118) ++#define QRX_DRX_IDX_1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x11C) ++#define QDMA_INFO (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x200) ++#define QDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x204) ++#define QDMA_RST_IDX (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x208) ++#define QDMA_RST_CFG (QDMA_RST_IDX) ++#define QDMA_DELAY_INT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x20C) ++#define QDMA_FC_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x210) ++#define QDMA_TX_SCH (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x214) ++#define QDMA_INT_STS (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x218) ++#define QFE_INT_STATUS (QDMA_INT_STS) ++#define QDMA_INT_MASK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x21C) ++#define QFE_INT_ENABLE (QDMA_INT_MASK) ++#define QDMA_TRTCM (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x220) ++#define QDMA_DATA0 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x224) ++#define QDMA_DATA1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x228) ++#define QDMA_RED_THRES (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x22C) ++#define QDMA_TEST (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x230) ++#define QDMA_DMA (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x234) ++#define QDMA_BMU (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x238) ++#define QDMA_HRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x240) ++#define QDMA_HRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x244) ++#define QDMA_SRED1 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x248) ++#define QDMA_SRED2 (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x24C) ++#define QTX_CTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x300) ++#define QTX_DTX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x304) ++#define QTX_FWD_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x308) ++#define QTX_CRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x310) ++#define QTX_DRX_PTR (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x314) ++#define QTX_RLS_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x318) ++#define QDMA_FQ_HEAD (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x320) ++#define QDMA_FQ_TAIL (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x324) ++#define QDMA_FQ_CNT (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x328) ++#define QDMA_FQ_BLEN (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x32C) ++#define QTX_Q0MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x350) ++#define QTX_Q1MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x354) ++#define QTX_Q2MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x358) ++#define QTX_Q3MIN_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x35C) ++#define QTX_Q0MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x360) ++#define QTX_Q1MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x364) ++#define QTX_Q2MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x368) ++#define QTX_Q3MAX_BK (RALINK_FRAME_ENGINE_BASE + QDMA_RELATED + 0x36C) ++ ++ ++#endif/*MT7621 QDMA*/ ++ ++#else ++ ++/* 1. Frame Engine Global Registers */ ++#define MDIO_ACCESS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x00) ++#define MDIO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x04) ++#define FE_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x08) ++#define FE_RST_GL (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x0C) ++#define FE_INT_STATUS (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x10) ++#define FE_INT_ENABLE (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x14) ++#define MDIO_CFG2 (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x18) //Original:FC_DROP_STA ++#define FOC_TS_T (RALINK_FRAME_ENGINE_BASE+RAFRAMEENGINE_OFFSET+0x1C) ++ ++ ++/* 2. GDMA Registers */ ++#define GDMA1_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x00) ++#define GDMA1_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x04) ++#define GDMA1_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x08) ++#define GDMA1_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x0C) ++#define GDMA1_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA_OFFSET+0x10) ++ ++#define GDMA2_FWD_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x00) ++#define GDMA2_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x04) ++#define GDMA2_SHPR_CFG (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x08) ++#define GDMA2_MAC_ADRL (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x0C) ++#define GDMA2_MAC_ADRH (RALINK_FRAME_ENGINE_BASE+RAGDMA2_OFFSET+0x10) ++ ++/* 3. PSE */ ++#define PSE_FQ_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x00) ++#define CDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x04) ++#define GDMA1_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x08) ++#define GDMA2_FC_CFG (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x0C) ++#define PDMA_FC_CFG (RALINK_FRAME_ENGINE_BASE+0x1f0) ++ ++/* 4. CDMA */ ++#define CDMA_CSG_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x00) ++#define CDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RACDMA_OFFSET+0x04) ++/* skip ppoe sid and vlan id definition */ ++ ++ ++/* 5. PDMA */ ++#define PDMA_GLO_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x00) ++#define PDMA_RST_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x04) ++#define PDMA_SCH_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x08) ++ ++#define DLY_INT_CFG (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x0C) ++ ++#define TX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x10) ++#define TX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x14) ++#define TX_CTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x18) ++#define TX_DTX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x1C) ++ ++#define TX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x20) ++#define TX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x24) ++#define TX_CTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x28) ++#define TX_DTX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x2C) ++ ++#define TX_BASE_PTR2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40) ++#define TX_MAX_CNT2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44) ++#define TX_CTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48) ++#define TX_DTX_IDX2 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C) ++ ++#define TX_BASE_PTR3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x50) ++#define TX_MAX_CNT3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x54) ++#define TX_CTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x58) ++#define TX_DTX_IDX3 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x5C) ++ ++#define RX_BASE_PTR0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x30) ++#define RX_MAX_CNT0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x34) ++#define RX_CALC_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x38) ++#define RX_DRX_IDX0 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x3C) ++ ++#define RX_BASE_PTR1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x40) ++#define RX_MAX_CNT1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x44) ++#define RX_CALC_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x48) ++#define RX_DRX_IDX1 (RALINK_FRAME_ENGINE_BASE+RAPDMA_OFFSET+0x4C) ++ ++#endif ++ ++#define DELAY_INT_INIT 0x84048404 ++#define FE_INT_DLY_INIT (TX_DLY_INT | RX_DLY_INT) ++ ++ ++#if !defined (CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ ++/* 6. Counter and Meter Table */ ++#define PPE_AC_BCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x000) /* PPE Accounting Group 0 Byte Cnt */ ++#define PPE_AC_PCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x004) /* PPE Accounting Group 0 Packet Cnt */ ++/* 0 ~ 63 */ ++ ++#define PPE_MTR_CNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x200) /* 0 ~ 63 */ ++/* skip... */ ++#define PPE_MTR_CNT63 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x2FC) ++ ++#define GDMA_TX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x300) /* Transmit good byte cnt for GEport */ ++#define GDMA_TX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x304) /* Transmit good pkt cnt for GEport */ ++#define GDMA_TX_SKIPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x308) /* Transmit skip cnt for GEport */ ++#define GDMA_TX_COLCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x30C) /* Transmit collision cnt for GEport */ ++ ++/* update these address mapping to fit data sheet v0.26, by bobtseng, 2007.6.14 */ ++#define GDMA_RX_GBCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x320) ++#define GDMA_RX_GPCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x324) ++#define GDMA_RX_OERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x328) ++#define GDMA_RX_FERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x32C) ++#define GDMA_RX_SERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x330) ++#define GDMA_RX_LERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x334) ++#define GDMA_RX_CERCNT0 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x338) ++#define GDMA_RX_FCCNT1 (RALINK_FRAME_ENGINE_BASE+RACMTABLE_OFFSET+0x33C) ++ ++#endif ++ ++ ++/* Per Port Packet Counts in RT3052, added by bobtseng 2009.4.17. */ ++#define PORT0_PKCOUNT (0xb01100e8) ++#define PORT1_PKCOUNT (0xb01100ec) ++#define PORT2_PKCOUNT (0xb01100f0) ++#define PORT3_PKCOUNT (0xb01100f4) ++#define PORT4_PKCOUNT (0xb01100f8) ++#define PORT5_PKCOUNT (0xb01100fc) ++ ++ ++// PHYS_TO_K1 ++#define PHYS_TO_K1(physaddr) KSEG1ADDR(physaddr) ++ ++ ++#define sysRegRead(phys) \ ++ (*(volatile unsigned int *)PHYS_TO_K1(phys)) ++ ++#define sysRegWrite(phys, val) \ ++ ((*(volatile unsigned int *)PHYS_TO_K1(phys)) = (val)) ++ ++#define u_long unsigned long ++#define u32 unsigned int ++#define u16 unsigned short ++ ++ ++/* ====================================== */ ++#define GDM1_DISPAD BIT(18) ++#define GDM1_DISCRC BIT(17) ++ ++//GDMA1 uni-cast frames destination port ++#define GDM1_ICS_EN (0x1 << 22) ++#define GDM1_TCS_EN (0x1 << 21) ++#define GDM1_UCS_EN (0x1 << 20) ++#define GDM1_JMB_EN (0x1 << 19) ++#define GDM1_STRPCRC (0x1 << 16) ++#define GDM1_UFRC_P_CPU (0 << 12) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_UFRC_P_PPE (4 << 12) ++#else ++#define GDM1_UFRC_P_PPE (6 << 12) ++#endif ++ ++//GDMA1 broad-cast MAC address frames ++#define GDM1_BFRC_P_CPU (0 << 8) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_BFRC_P_PPE (4 << 8) ++#else ++#define GDM1_BFRC_P_PPE (6 << 8) ++#endif ++ ++//GDMA1 multi-cast MAC address frames ++#define GDM1_MFRC_P_CPU (0 << 4) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_MFRC_P_PPE (4 << 4) ++#else ++#define GDM1_MFRC_P_PPE (6 << 4) ++#endif ++ ++//GDMA1 other MAC address frames destination port ++#define GDM1_OFRC_P_CPU (0 << 0) ++#if defined (CONFIG_RALINK_MT7621) ++#define GDM1_OFRC_P_PPE (4 << 0) ++#else ++#define GDM1_OFRC_P_PPE (6 << 0) ++#endif ++ ++#if defined (CONFIG_RALINK_RT6856) || defined (CONFIG_RALINK_MT7620) || defined (CONFIG_RALINK_MT7621) ++/* checksum generator registers are removed */ ++#define ICS_GEN_EN (0 << 2) ++#define UCS_GEN_EN (0 << 1) ++#define TCS_GEN_EN (0 << 0) ++#else ++#define ICS_GEN_EN (1 << 2) ++#define UCS_GEN_EN (1 << 1) ++#define TCS_GEN_EN (1 << 0) ++#endif ++ ++// MDIO_CFG bit ++#define MDIO_CFG_GP1_FC_TX (1 << 11) ++#define MDIO_CFG_GP1_FC_RX (1 << 10) ++ ++/* ====================================== */ ++/* ====================================== */ ++#define GP1_LNK_DWN BIT(9) ++#define GP1_AN_FAIL BIT(8) ++/* ====================================== */ ++/* ====================================== */ ++#define PSE_RESET BIT(0) ++/* ====================================== */ ++#define PST_DRX_IDX1 BIT(17) ++#define PST_DRX_IDX0 BIT(16) ++#define PST_DTX_IDX3 BIT(3) ++#define PST_DTX_IDX2 BIT(2) ++#define PST_DTX_IDX1 BIT(1) ++#define PST_DTX_IDX0 BIT(0) ++ ++#define RX_2B_OFFSET BIT(31) ++#define DESC_32B_EN BIT(8) ++#define TX_WB_DDONE BIT(6) ++#define RX_DMA_BUSY BIT(3) ++#define TX_DMA_BUSY BIT(1) ++#define RX_DMA_EN BIT(2) ++#define TX_DMA_EN BIT(0) ++ ++#define PDMA_BT_SIZE_4DWORDS (0<<4) ++#define PDMA_BT_SIZE_8DWORDS (1<<4) ++#define PDMA_BT_SIZE_16DWORDS (2<<4) ++#define PDMA_BT_SIZE_32DWORDS (3<<4) ++ ++/* Register bits. ++ */ ++ ++#define MACCFG_RXEN (1<<2) ++#define MACCFG_TXEN (1<<3) ++#define MACCFG_PROMISC (1<<18) ++#define MACCFG_RXMCAST (1<<19) ++#define MACCFG_FDUPLEX (1<<20) ++#define MACCFG_PORTSEL (1<<27) ++#define MACCFG_HBEATDIS (1<<28) ++ ++ ++#define DMACTL_SR (1<<1) /* Start/Stop Receive */ ++#define DMACTL_ST (1<<13) /* Start/Stop Transmission Command */ ++ ++#define DMACFG_SWR (1<<0) /* Software Reset */ ++#define DMACFG_BURST32 (32<<8) ++ ++#define DMASTAT_TS 0x00700000 /* Transmit Process State */ ++#define DMASTAT_RS 0x000e0000 /* Receive Process State */ ++ ++#define MACCFG_INIT 0 //(MACCFG_FDUPLEX) // | MACCFG_PORTSEL) ++ ++ ++ ++/* Descriptor bits. ++ */ ++#define R_OWN 0x80000000 /* Own Bit */ ++#define RD_RER 0x02000000 /* Receive End Of Ring */ ++#define RD_LS 0x00000100 /* Last Descriptor */ ++#define RD_ES 0x00008000 /* Error Summary */ ++#define RD_CHAIN 0x01000000 /* Chained */ ++ ++/* Word 0 */ ++#define T_OWN 0x80000000 /* Own Bit */ ++#define TD_ES 0x00008000 /* Error Summary */ ++ ++/* Word 1 */ ++#define TD_LS 0x40000000 /* Last Segment */ ++#define TD_FS 0x20000000 /* First Segment */ ++#define TD_TER 0x08000000 /* Transmit End Of Ring */ ++#define TD_CHAIN 0x01000000 /* Chained */ ++ ++ ++#define TD_SET 0x08000000 /* Setup Packet */ ++ ++ ++#define POLL_DEMAND 1 ++ ++#define RSTCTL (0x34) ++#define RSTCTL_RSTENET1 (1<<19) ++#define RSTCTL_RSTENET2 (1<<20) ++ ++#define INIT_VALUE_OF_RT2883_PSE_FQ_CFG 0xff908000 ++#define INIT_VALUE_OF_PSE_FQFC_CFG 0x80504000 ++#define INIT_VALUE_OF_FORCE_100_FD 0x1001BC01 ++#define INIT_VALUE_OF_FORCE_1000_FD 0x1F01DC01 ++ ++// Define Whole FE Reset Register ++#define RSTCTRL (RALINK_SYSCTL_BASE + 0x34) ++ ++/*========================================= ++ PDMA RX Descriptor Format define ++=========================================*/ ++ ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO1_ PDMA_RXD_INFO1_T; ++ ++struct _PDMA_RXD_INFO1_ ++{ ++ unsigned int PDP0; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO2_ PDMA_RXD_INFO2_T; ++ ++struct _PDMA_RXD_INFO2_ ++{ ++ unsigned int PLEN1 : 14; ++ unsigned int LS1 : 1; ++ unsigned int TAG : 1; ++ unsigned int PLEN0 : 14; ++ unsigned int LS0 : 1; ++ unsigned int DDONE_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO3_ PDMA_RXD_INFO3_T; ++ ++struct _PDMA_RXD_INFO3_ ++{ ++ unsigned int VID:16; ++ unsigned int TPID:16; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_RXD_INFO4_ PDMA_RXD_INFO4_T; ++ ++struct _PDMA_RXD_INFO4_ ++{ ++#if defined (CONFIG_RALINK_MT7620) ++ unsigned int FOE_Entry : 14; ++ unsigned int CRSN : 5; ++ unsigned int SPORT : 3; ++ unsigned int L4F : 1; ++ unsigned int L4VLD : 1; ++ unsigned int TACK : 1; ++ unsigned int IP4F : 1; ++ unsigned int IP4 : 1; ++ unsigned int IP6 : 1; ++ unsigned int UN_USE1 : 4; ++#elif defined (CONFIG_RALINK_MT7621) ++ unsigned int FOE_Entry : 14; ++ unsigned int CRSN : 5; ++ unsigned int SP : 4; ++ unsigned int L4F : 1; ++ unsigned int L4VLD : 1; ++ unsigned int TACK : 1; ++ unsigned int IP4F : 1; ++ unsigned int IP4 : 1; ++ unsigned int IP6 : 1; ++ unsigned int UN_USE1 : 3; ++#else ++ unsigned int FOE_Entry : 14; ++ unsigned int FVLD : 1; ++ unsigned int UN_USE1 : 1; ++ unsigned int AI : 8; ++ unsigned int SP : 3; ++ unsigned int AIS : 1; ++ unsigned int L4F : 1; ++ unsigned int IPF : 1; ++ unsigned int L4FVLD_bit : 1; ++ unsigned int IPFVLD_bit : 1; ++#endif ++}; ++ ++ ++struct PDMA_rxdesc { ++ PDMA_RXD_INFO1_T rxd_info1; ++ PDMA_RXD_INFO2_T rxd_info2; ++ PDMA_RXD_INFO3_T rxd_info3; ++ PDMA_RXD_INFO4_T rxd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int rxd_info5; ++ unsigned int rxd_info6; ++ unsigned int rxd_info7; ++ unsigned int rxd_info8; ++#endif ++}; ++ ++/*========================================= ++ PDMA TX Descriptor Format define ++=========================================*/ ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO1_ PDMA_TXD_INFO1_T; ++ ++struct _PDMA_TXD_INFO1_ ++{ ++ unsigned int SDP0; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO2_ PDMA_TXD_INFO2_T; ++ ++struct _PDMA_TXD_INFO2_ ++{ ++ unsigned int SDL1 : 14; ++ unsigned int LS1_bit : 1; ++ unsigned int BURST_bit : 1; ++ unsigned int SDL0 : 14; ++ unsigned int LS0_bit : 1; ++ unsigned int DDONE_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO3_ PDMA_TXD_INFO3_T; ++ ++struct _PDMA_TXD_INFO3_ ++{ ++ unsigned int SDP1; ++}; ++//------------------------------------------------- ++typedef struct _PDMA_TXD_INFO4_ PDMA_TXD_INFO4_T; ++ ++struct _PDMA_TXD_INFO4_ ++{ ++#if defined (CONFIG_RALINK_MT7620) ++ unsigned int VPRI_VIDX : 8; ++ unsigned int SIDX : 4; ++ unsigned int INSP : 1; ++ unsigned int RESV : 2; ++ unsigned int UDF : 5; ++ unsigned int FP_BMAP : 8; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#elif defined (CONFIG_RALINK_MT7621) ++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12) ++ unsigned int RESV : 2; ++ unsigned int UDF : 6; ++ unsigned int FPORT : 3; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#else ++ unsigned int VPRI_VIDX : 8; ++ unsigned int SIDX : 4; ++ unsigned int INSP : 1; ++ unsigned int RESV : 1; ++ unsigned int UN_USE3 : 2; ++ unsigned int QN : 3; ++ unsigned int UN_USE2 : 1; ++ unsigned int UDF : 4; ++ unsigned int PN : 3; ++ unsigned int UN_USE1 : 1; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++#endif ++}; ++ ++ ++struct PDMA_txdesc { ++ PDMA_TXD_INFO1_T txd_info1; ++ PDMA_TXD_INFO2_T txd_info2; ++ PDMA_TXD_INFO3_T txd_info3; ++ PDMA_TXD_INFO4_T txd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int txd_info5; ++ unsigned int txd_info6; ++ unsigned int txd_info7; ++ unsigned int txd_info8; ++#endif ++}; ++ ++ ++#if defined (CONFIG_RALINK_MT7621) ++/*========================================= ++ QDMA TX Descriptor Format define ++=========================================*/ ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO1_ QDMA_TXD_INFO1_T; ++ ++struct _QDMA_TXD_INFO1_ ++{ ++ unsigned int SDP; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO2_ QDMA_TXD_INFO2_T; ++ ++struct _QDMA_TXD_INFO2_ ++{ ++ unsigned int NDP; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO3_ QDMA_TXD_INFO3_T; ++ ++struct _QDMA_TXD_INFO3_ ++{ ++ unsigned int QID : 4; ++ unsigned int RESV : 10; ++ unsigned int SWC_bit : 1; ++ unsigned int BURST_bit : 1; ++ unsigned int SDL : 14; ++ unsigned int LS_bit : 1; ++ unsigned int OWN_bit : 1; ++}; ++//------------------------------------------------- ++typedef struct _QDMA_TXD_INFO4_ QDMA_TXD_INFO4_T; ++ ++struct _QDMA_TXD_INFO4_ ++{ ++ unsigned int VLAN_TAG :17; // INSV(1)+VPRI(3)+CFI(1)+VID(12) ++ unsigned int RESV : 2; ++ unsigned int UDF : 6; ++ unsigned int FPORT : 3; ++ unsigned int TSO : 1; ++ unsigned int TUI_CO : 3; ++}; ++ ++ ++struct QDMA_txdesc { ++ QDMA_TXD_INFO1_T txd_info1; ++ QDMA_TXD_INFO2_T txd_info2; ++ QDMA_TXD_INFO3_T txd_info3; ++ QDMA_TXD_INFO4_T txd_info4; ++#ifdef CONFIG_32B_DESC ++ unsigned int txd_info5; ++ unsigned int txd_info6; ++ unsigned int txd_info7; ++ unsigned int txd_info8; ++#endif ++}; ++#endif ++ ++#define phys_to_bus(a) (a & 0x1FFFFFFF) ++ ++#define PHY_Enable_Auto_Nego 0x1000 ++#define PHY_Restart_Auto_Nego 0x0200 ++ ++/* PHY_STAT_REG = 1; */ ++#define PHY_Auto_Neco_Comp 0x0020 ++#define PHY_Link_Status 0x0004 ++ ++/* PHY_AUTO_NEGO_REG = 4; */ ++#define PHY_Cap_10_Half 0x0020 ++#define PHY_Cap_10_Full 0x0040 ++#define PHY_Cap_100_Half 0x0080 ++#define PHY_Cap_100_Full 0x0100 ++ ++/* proc definition */ ++ ++#if !defined (CONFIG_RALINK_RT6855) && !defined(CONFIG_RALINK_RT6855A) && \ ++ !defined (CONFIG_RALINK_MT7620) && !defined (CONFIG_RALINK_MT7621) ++#define CDMA_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x4c) ++#define GDMA1_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x50) ++#define PPE_OQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x54) ++#define PSE_IQ_STA (RALINK_FRAME_ENGINE_BASE+RAPSE_OFFSET+0x58) ++#endif ++ ++#define PROCREG_CONTROL_FILE "/var/run/procreg_control" ++#if defined (CONFIG_RALINK_RT2880) ++#define PROCREG_DIR "rt2880" ++#elif defined (CONFIG_RALINK_RT3052) ++#define PROCREG_DIR "rt3052" ++#elif defined (CONFIG_RALINK_RT3352) ++#define PROCREG_DIR "rt3352" ++#elif defined (CONFIG_RALINK_RT5350) ++#define PROCREG_DIR "rt5350" ++#elif defined (CONFIG_RALINK_RT2883) ++#define PROCREG_DIR "rt2883" ++#elif defined (CONFIG_RALINK_RT3883) ++#define PROCREG_DIR "rt3883" ++#elif defined (CONFIG_RALINK_RT6855) ++#define PROCREG_DIR "rt6855" ++#elif defined (CONFIG_RALINK_MT7620) ++#define PROCREG_DIR "mt7620" ++#elif defined (CONFIG_RALINK_MT7621) ++#define PROCREG_DIR "mt7621" ++#elif defined (CONFIG_RALINK_MT7628) ++#define PROCREG_DIR "mt7628" ++#elif defined (CONFIG_RALINK_RT6855A) ++#define PROCREG_DIR "rt6855a" ++#else ++#define PROCREG_DIR "rt2880" ++#endif ++#define PROCREG_SKBFREE "skb_free" ++#define PROCREG_TXRING "tx_ring" ++#define PROCREG_RXRING "rx_ring" ++#define PROCREG_NUM_OF_TXD "num_of_txd" ++#define PROCREG_TSO_LEN "tso_len" ++#define PROCREG_LRO_STATS "lro_stats" ++#define PROCREG_GMAC "gmac" ++#define PROCREG_GMAC2 "gmac2" ++#define PROCREG_CP0 "cp0" ++#define PROCREG_RAQOS "qos" ++#define PROCREG_READ_VAL "regread_value" ++#define PROCREG_WRITE_VAL "regwrite_value" ++#define PROCREG_ADDR "reg_addr" ++#define PROCREG_CTL "procreg_control" ++#define PROCREG_RXDONE_INTR "rxdone_intr_count" ++#define PROCREG_ESW_INTR "esw_intr_count" ++#define PROCREG_ESW_CNT "esw_cnt" ++#define PROCREG_SNMP "snmp" ++#if defined (TASKLET_WORKQUEUE_SW) ++#define PROCREG_SCHE "schedule" ++#endif ++#define PROCREG_QDMA "qdma" ++ ++struct rt2880_reg_op_data { ++ char name[64]; ++ unsigned int reg_addr; ++ unsigned int op; ++ unsigned int reg_value; ++}; ++ ++#ifdef CONFIG_RAETH_LRO ++struct lro_counters { ++ u32 lro_aggregated; ++ u32 lro_flushed; ++ u32 lro_no_desc; ++}; ++ ++struct lro_para_struct { ++ unsigned int lan_ip1; ++}; ++ ++#endif // CONFIG_RAETH_LRO // ++ ++ ++ ++ ++typedef struct end_device ++{ ++ ++ unsigned int tx_cpu_owner_idx0; ++ unsigned int rx_cpu_owner_idx0; ++ unsigned int fe_int_status; ++ unsigned int tx_full; ++ ++#if !defined (CONFIG_RAETH_QDMA) ++ unsigned int phy_tx_ring0; ++#else ++ /* QDMA Tx PTR */ ++ struct sk_buff *free_skb[NUM_TX_DESC]; ++ unsigned int tx_dma_ptr; ++ unsigned int tx_cpu_ptr; ++ unsigned int free_txd_num; ++ unsigned int free_txd_head; ++ unsigned int free_txd_tail; ++ struct QDMA_txdesc *txd_pool; ++ dma_addr_t phy_txd_pool; ++// unsigned int phy_txd_pool; ++ unsigned int txd_pool_info[NUM_TX_DESC]; ++#endif ++ ++ unsigned int phy_rx_ring0, phy_rx_ring1; ++ ++#if defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || \ ++ defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || \ ++ defined(CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7620) || \ ++ defined(CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++ //send signal to user application to notify link status changed ++ struct work_struct kill_sig_wq; ++#endif ++ ++ struct work_struct reset_task; ++#ifdef WORKQUEUE_BH ++ struct work_struct rx_wq; ++#else ++#if defined (TASKLET_WORKQUEUE_SW) ++ struct work_struct rx_wq; ++#endif ++#endif // WORKQUEUE_BH // ++ ++#if defined(CONFIG_RAETH_QOS) ++ struct sk_buff * skb_free[NUM_TX_RINGS][NUM_TX_DESC]; ++ unsigned int free_idx[NUM_TX_RINGS]; ++#else ++ struct sk_buff* skb_free[NUM_TX_DESC]; ++ unsigned int free_idx; ++#endif ++ ++ struct net_device_stats stat; /* The new statistics table. */ ++ spinlock_t page_lock; /* Page register locks */ ++ struct PDMA_txdesc *tx_ring0; ++#if defined(CONFIG_RAETH_QOS) ++ struct PDMA_txdesc *tx_ring1; ++ struct PDMA_txdesc *tx_ring2; ++ struct PDMA_txdesc *tx_ring3; ++#endif ++ struct PDMA_rxdesc *rx_ring0; ++ struct sk_buff *netrx0_skbuf[NUM_RX_DESC]; ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ struct PDMA_rxdesc *rx_ring1; ++ struct sk_buff *netrx1_skbuf[NUM_RX_DESC]; ++#endif ++#ifdef CONFIG_RAETH_NAPI ++ atomic_t irq_sem; ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35) ++ struct napi_struct napi; ++#endif ++#endif ++#ifdef CONFIG_PSEUDO_SUPPORT ++ struct net_device *PseudoDev; ++ unsigned int isPseudo; ++#endif ++#if defined (CONFIG_ETHTOOL) /*&& defined (CONFIG_RAETH_ROUTER)*/ ++ struct mii_if_info mii_info; ++#endif ++#ifdef CONFIG_RAETH_LRO ++ struct lro_counters lro_counters; ++ struct net_lro_mgr lro_mgr; ++ struct net_lro_desc lro_arr[8]; ++#endif ++#ifdef CONFIG_RAETH_HW_VLAN_RX ++ struct vlan_group *vlgrp; ++#endif ++} END_DEVICE, *pEND_DEVICE; ++ ++ ++#define RAETH_VERSION "v3.0" ++ ++#endif ++ ++#ifdef CONFIG_RAETH_QDMA ++#define DMA_GLO_CFG QDMA_GLO_CFG ++#define GDMA1_FWD_PORT 0x5555 ++#define GDMA2_FWD_PORT 0x5555 ++#define RAETH_RX_CALC_IDX0 QRX_CRX_IDX_0 ++#define RAETH_RX_CALC_IDX1 QRX_CRX_IDX_1 ++#define RAETH_FE_INT_STATUS QFE_INT_STATUS ++#define RAETH_FE_INT_ALL QFE_INT_ALL ++#define RAETH_FE_INT_ENABLE QFE_INT_ENABLE ++#define RAETH_FE_INT_DLY_INIT QFE_INT_DLY_INIT ++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | RLS_DONE_INT ++#define RAETH_TX_DLY_INT RLS_DLY_INT ++#define RAETH_TX_DONE_INT0 RLS_DONE_INT ++#define RAETH_DLY_INT_CFG QDMA_DELAY_INT ++#else ++#define DMA_GLO_CFG PDMA_GLO_CFG ++#define GDMA1_FWD_PORT 0x0000 ++#define GDMA2_FWD_PORT 0x0000 ++#define RAETH_RX_CALC_IDX0 RX_CALC_IDX0 ++#define RAETH_RX_CALC_IDX1 RX_CALC_IDX1 ++#define RAETH_FE_INT_STATUS FE_INT_STATUS ++#define RAETH_FE_INT_ALL FE_INT_ALL ++#define RAETH_FE_INT_ENABLE FE_INT_ENABLE ++#define RAETH_FE_INT_DLY_INIT FE_INT_DLY_INIT ++#define RAETH_FE_INT_SETTING RX_DONE_INT0 | RX_DONE_INT1 | TX_DONE_INT0 | TX_DONE_INT1 | TX_DONE_INT2 | TX_DONE_INT3 ++#define RAETH_TX_DLY_INT TX_DLY_INT ++#define RAETH_TX_DONE_INT0 TX_DONE_INT0 ++#define RAETH_DLY_INT_CFG DLY_INT_CFG ++#endif +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_ioctl.h +@@ -0,0 +1,92 @@ ++#ifndef _RAETH_IOCTL_H ++#define _RAETH_IOCTL_H ++ ++/* ioctl commands */ ++#define RAETH_ESW_REG_READ 0x89F1 ++#define RAETH_ESW_REG_WRITE 0x89F2 ++#define RAETH_MII_READ 0x89F3 ++#define RAETH_MII_WRITE 0x89F4 ++#define RAETH_ESW_INGRESS_RATE 0x89F5 ++#define RAETH_ESW_EGRESS_RATE 0x89F6 ++#define RAETH_ESW_PHY_DUMP 0x89F7 ++#define RAETH_QDMA_REG_READ 0x89F8 ++#define RAETH_QDMA_REG_WRITE 0x89F9 ++#define RAETH_QDMA_QUEUE_MAPPING 0x89FA ++#define RAETH_QDMA_READ_CPU_CLK 0x89FB ++ ++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621) ++ ++#define REG_ESW_WT_MAC_MFC 0x10 ++#define REG_ESW_WT_MAC_ATA1 0x74 ++#define REG_ESW_WT_MAC_ATA2 0x78 ++#define REG_ESW_WT_MAC_ATWD 0x7C ++#define REG_ESW_WT_MAC_ATC 0x80 ++ ++#define REG_ESW_TABLE_TSRA1 0x84 ++#define REG_ESW_TABLE_TSRA2 0x88 ++#define REG_ESW_TABLE_ATRD 0x8C ++ ++ ++#define REG_ESW_VLAN_VTCR 0x90 ++#define REG_ESW_VLAN_VAWD1 0x94 ++#define REG_ESW_VLAN_VAWD2 0x98 ++ ++ ++#define REG_ESW_VLAN_ID_BASE 0x100 ++ ++//#define REG_ESW_VLAN_ID_BASE 0x50 ++#define REG_ESW_VLAN_MEMB_BASE 0x70 ++#define REG_ESW_TABLE_SEARCH 0x24 ++#define REG_ESW_TABLE_STATUS0 0x28 ++#define REG_ESW_TABLE_STATUS1 0x2C ++#define REG_ESW_TABLE_STATUS2 0x30 ++#define REG_ESW_WT_MAC_AD0 0x34 ++#define REG_ESW_WT_MAC_AD1 0x38 ++#define REG_ESW_WT_MAC_AD2 0x3C ++ ++#else ++/* rt3052 embedded ethernet switch registers */ ++#define REG_ESW_VLAN_ID_BASE 0x50 ++#define REG_ESW_VLAN_MEMB_BASE 0x70 ++#define REG_ESW_TABLE_SEARCH 0x24 ++#define REG_ESW_TABLE_STATUS0 0x28 ++#define REG_ESW_TABLE_STATUS1 0x2C ++#define REG_ESW_TABLE_STATUS2 0x30 ++#define REG_ESW_WT_MAC_AD0 0x34 ++#define REG_ESW_WT_MAC_AD1 0x38 ++#define REG_ESW_WT_MAC_AD2 0x3C ++#endif ++ ++ ++#if defined(CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_MT7628) ++#define REG_ESW_MAX 0x16C ++#elif defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) ++#define REG_ESW_MAX 0x7FFFF ++#else //RT305x, RT3350 ++#define REG_ESW_MAX 0xFC ++#endif ++#define REG_HQOS_MAX 0x3FFF ++ ++ ++typedef struct rt3052_esw_reg { ++ unsigned int off; ++ unsigned int val; ++} esw_reg; ++ ++typedef struct ralink_mii_ioctl_data { ++ __u32 phy_id; ++ __u32 reg_num; ++ __u32 val_in; ++ __u32 val_out; ++} ra_mii_ioctl_data; ++ ++typedef struct rt335x_esw_reg { ++ unsigned int on_off; ++ unsigned int port; ++ unsigned int bw;/*Mbps*/ ++} esw_rate; ++ ++ ++#endif +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_mac.c +@@ -0,0 +1,98 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/sched.h> ++#include <linux/types.h> ++#include <linux/fcntl.h> ++#include <linux/interrupt.h> ++#include <linux/ptrace.h> ++#include <linux/ioport.h> ++#include <linux/in.h> ++#include <linux/slab.h> ++#include <linux/string.h> ++#include <linux/signal.h> ++#include <linux/irq.h> ++#include <linux/ctype.h> ++ ++#include <asm/io.h> ++#include <asm/bitops.h> ++#include <asm/io.h> ++#include <asm/dma.h> ++ ++#include <asm/rt2880/surfboardint.h> /* for cp0 reg access, added by bobtseng */ ++ ++#include <linux/errno.h> ++#include <linux/init.h> ++//#include <linux/mca.h> ++ ++#include <linux/netdevice.h> ++#include <linux/etherdevice.h> ++#include <linux/skbuff.h> ++ ++#include <linux/init.h> ++#include <linux/module.h> ++#include <linux/proc_fs.h> ++#include <asm/uaccess.h> ++ ++#if defined(CONFIG_USER_SNMPD) ++#include <linux/seq_file.h> ++#endif ++ ++ ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++ ++extern struct net_device *dev_raether; ++ ++ ++void ra2880stop(END_DEVICE *ei_local) ++{ ++ unsigned int regValue; ++ printk("ra2880stop()..."); ++ ++ regValue = sysRegRead(PDMA_GLO_CFG); ++ regValue &= ~(TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN); ++ sysRegWrite(PDMA_GLO_CFG, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regValue); ++ printk("Done\n"); ++} ++ ++void ei_irq_clear(void) ++{ ++ sysRegWrite(FE_INT_STATUS, 0xFFFFFFFF); ++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_STATUS", FE_INT_STATUS, 0xFFFFFFFF); ++} ++ ++void rt2880_gmac_hard_reset(void) ++{ ++ sysRegWrite(RSTCTRL, RALINK_FE_RST); ++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, RALINK_FE_RST); ++ sysRegWrite(RSTCTRL, 0); ++ printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, 0); ++} ++ ++void ra2880EnableInterrupt() ++{ ++ unsigned int regValue = sysRegRead(FE_INT_ENABLE); ++ sysRegWrite(FE_INT_ENABLE, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "FE_INT_ENABLE", FE_INT_ENABLE, regValue); ++} ++ ++void ra2880MacAddressSet(unsigned char p[6]) ++{ ++ unsigned long regValue; ++ ++ regValue = (p[0] << 8) | (p[1]); ++ sysRegWrite(GDMA1_MAC_ADRH, regValue); ++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRH", GDMA1_MAC_ADRH, regValue); ++ ++ regValue = (p[2] << 24) | (p[3] <<16) | (p[4] << 8) | p[5]; ++ printk("-> %s 0x%08x 0x%08x\n", "GDMA1_MAC_ADRL", GDMA1_MAC_ADRL, regValue); ++ sysRegWrite(GDMA1_MAC_ADRL, regValue); ++ ++ return; ++} ++ ++ +--- /dev/null ++++ b/drivers/net/ethernet/raeth/ra_mac.h +@@ -0,0 +1,35 @@ ++#ifndef RA_MAC_H ++#define RA_MAC_H ++ ++void ra2880stop(END_DEVICE *ei_local); ++void ra2880MacAddressSet(unsigned char p[6]); ++void ra2880Mac2AddressSet(unsigned char p[6]); ++void ethtool_init(struct net_device *dev); ++ ++void ra2880EnableInterrupt(void); ++ ++void dump_qos(void); ++void dump_reg(void); ++void dump_cp0(void); ++ ++int debug_proc_init(void); ++void debug_proc_exit(void); ++ ++#if defined (CONFIG_RALINK_RT6855) || defined(CONFIG_RALINK_RT6855A) || \ ++ defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7621) ++void enable_auto_negotiate(int unused); ++#else ++void enable_auto_negotiate(int ge); ++#endif ++ ++void rt2880_gmac_hard_reset(void); ++ ++int TsoLenUpdate(int tso_len); ++int NumOfTxdUpdate(int num_of_txd); ++ ++#ifdef CONFIG_RAETH_LRO ++int LroStatsUpdate(struct net_lro_mgr *lro_mgr, bool all_flushed); ++#endif ++int getnext(const char *src, int separator, char *dest); ++int str_to_ip(unsigned int *ip, const char *str); ++#endif +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether.c +@@ -0,0 +1,693 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/interrupt.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++ ++#include <asm/rt2880/rt_mmap.h> ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++#include "ra_ioctl.h" ++ ++static int rt2880_eth_recv(struct net_device* dev); ++int reg_dbg = 0; ++ ++void setup_internal_gsw(void); ++ ++#define MAX_RX_LENGTH 1536 ++ ++struct net_device *dev_raether; ++ ++static int rx_dma_owner_idx; ++static int rx_dma_owner_idx0; ++static int pending_recv; ++static struct PDMA_rxdesc *rx_ring; ++static unsigned long tx_ring_full=0; ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern int fe_dma_init(struct net_device *dev); ++extern int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no); ++extern void ei_xmit_housekeeping(unsigned long unused); ++extern inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no); ++ ++static int ei_set_mac_addr(struct net_device *dev, void *p) ++{ ++ struct sockaddr *addr = p; ++ ++ memcpy(dev->dev_addr, addr->sa_data, dev->addr_len); ++ ++ if(netif_running(dev)) ++ return -EBUSY; ++ ++ ra2880MacAddressSet(addr->sa_data); ++ return 0; ++} ++ ++ ++void set_fe_dma_glo_cfg(void) ++{ ++ int dma_glo_cfg=0; ++ ++ dma_glo_cfg = (TX_WB_DDONE | RX_DMA_EN | TX_DMA_EN | PDMA_BT_SIZE_16DWORDS); ++ ++ dma_glo_cfg |= (RX_2B_OFFSET); ++ ++ sysRegWrite(DMA_GLO_CFG, dma_glo_cfg); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "DMA_GLO_CFG", DMA_GLO_CFG, dma_glo_cfg); ++} ++ ++int forward_config(struct net_device *dev) ++{ ++ unsigned int regVal, regCsg; ++ ++ regVal = sysRegRead(GDMA1_FWD_CFG); ++ regCsg = sysRegRead(CDMA_CSG_CFG); ++ ++ //set unicast/multicast/broadcast frame to cpu ++ regVal &= ~0xFFFF; ++ regVal |= GDMA1_FWD_PORT; ++ regCsg &= ~0x7; ++ ++ //disable ipv4 header checksum check ++ regVal &= ~GDM1_ICS_EN; ++ regCsg &= ~ICS_GEN_EN; ++ ++ //disable tcp checksum check ++ regVal &= ~GDM1_TCS_EN; ++ regCsg &= ~TCS_GEN_EN; ++ ++ //disable udp checksum check ++ regVal &= ~GDM1_UCS_EN; ++ regCsg &= ~UCS_GEN_EN; ++ ++ ++ dev->features &= ~NETIF_F_IP_CSUM; /* disable checksum TCP/UDP over IPv4 */ ++ ++ ++ sysRegWrite(GDMA1_FWD_CFG, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "GDMA1_FWD_CFG", GDMA1_FWD_CFG, regVal); ++ sysRegWrite(CDMA_CSG_CFG, regCsg); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "CDMA_CSG_CFG", CDMA_CSG_CFG, regCsg); ++ ++ regVal = 0x1; ++ sysRegWrite(FE_RST_GL, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, regVal); ++ sysRegWrite(FE_RST_GL, 0); // update for RSTCTL issue ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "FE_RST_GL", FE_RST_GL, 1); ++ ++ regCsg = sysRegRead(CDMA_CSG_CFG); ++ printk("CDMA_CSG_CFG = %0X\n",regCsg); ++ regVal = sysRegRead(GDMA1_FWD_CFG); ++ printk("GDMA1_FWD_CFG = %0X\n",regVal); ++ ++ return 1; ++} ++ ++ ++static int rt2880_eth_recv(struct net_device* dev) ++{ ++ struct sk_buff *skb, *rx_skb; ++ unsigned int length = 0; ++ unsigned long RxProcessed; ++ ++ ++ int bReschedule = 0; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ ++ ++ RxProcessed = 0; ++ ++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC; ++ ++ for ( ; ; ) { ++ ++ if (RxProcessed++ > NUM_RX_MAX_PROCESS) ++ { ++ // need to reschedule rx handle ++ bReschedule = 1; ++ break; ++ } ++ ++ ++ ++ if (ei_local->rx_ring0[rx_dma_owner_idx0].rxd_info2.DDONE_bit == 1) { ++ rx_ring = ei_local->rx_ring0; ++ rx_dma_owner_idx = rx_dma_owner_idx0; ++ } else { ++ break; ++ } ++ ++ /* skb processing */ ++ length = rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0; ++ rx_skb = ei_local->netrx0_skbuf[rx_dma_owner_idx]; ++ rx_skb->data = ei_local->netrx0_skbuf[rx_dma_owner_idx]->data; ++ rx_skb->len = length; ++ ++ rx_skb->data += NET_IP_ALIGN; ++ ++ rx_skb->tail = rx_skb->data + length; ++ ++ rx_skb->dev = dev; ++ rx_skb->protocol = eth_type_trans(rx_skb,dev); ++ ++ rx_skb->ip_summed = CHECKSUM_NONE; ++ ++ ++ /* We have to check the free memory size is big enough ++ * before pass the packet to cpu*/ ++ skb = __dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN, GFP_ATOMIC); ++ ++ if (unlikely(skb == NULL)) ++ { ++ printk(KERN_ERR "skb not available...\n"); ++ ei_local->stat.rx_dropped++; ++ bReschedule = 1; ++ break; ++ } ++ ++ { ++ netif_rx(rx_skb); ++ } ++ ++ { ++ ei_local->stat.rx_packets++; ++ ei_local->stat.rx_bytes += length; ++ } ++ ++ ++ rx_ring[rx_dma_owner_idx].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++ rx_ring[rx_dma_owner_idx].rxd_info2.LS0 = 0; ++ rx_ring[rx_dma_owner_idx].rxd_info2.DDONE_bit = 0; ++ rx_ring[rx_dma_owner_idx].rxd_info1.PDP0 = dma_map_single(NULL, skb->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ ++ /* Move point to next RXD which wants to alloc*/ ++ sysRegWrite(RAETH_RX_CALC_IDX0, rx_dma_owner_idx); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_RX_CALC_IDX0", RAETH_RX_CALC_IDX0, rx_dma_owner_idx); ++ ei_local->netrx0_skbuf[rx_dma_owner_idx] = skb; ++ ++ /* Update to Next packet point that was received. ++ */ ++ rx_dma_owner_idx0 = (sysRegRead(RAETH_RX_CALC_IDX0) + 1) % NUM_RX_DESC; ++ } /* for */ ++ ++ return bReschedule; ++} ++ ++void ei_receive_workq(struct work_struct *work) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long reg_int_mask=0; ++ int bReschedule=0; ++ ++ ++ if(tx_ring_full==0){ ++ bReschedule = rt2880_eth_recv(dev); ++ if(bReschedule) ++ { ++ schedule_work(&ei_local->rx_wq); ++ }else{ ++ reg_int_mask=sysRegRead(RAETH_FE_INT_ENABLE); ++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask| RX_DLY_INT); ++ } ++ }else{ ++ schedule_work(&ei_local->rx_wq); ++ } ++} ++ ++ ++static irqreturn_t ei_interrupt(int irq, void *dev_id) ++{ ++ unsigned long reg_int_val; ++ unsigned long reg_int_mask=0; ++ unsigned int recv = 0; ++ unsigned int transmit __maybe_unused = 0; ++ unsigned long flags; ++ ++ struct net_device *dev = (struct net_device *) dev_id; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ if (dev == NULL) ++ { ++ printk (KERN_ERR "net_interrupt(): irq %x for unknown device.\n", IRQ_ENET0); ++ return IRQ_NONE; ++ } ++ ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ reg_int_val = sysRegRead(RAETH_FE_INT_STATUS); ++ ++ if((reg_int_val & RX_DLY_INT)) ++ recv = 1; ++ ++ if (reg_int_val & RAETH_TX_DLY_INT) ++ transmit = 1; ++ ++ sysRegWrite(RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_STATUS", RAETH_FE_INT_STATUS, RAETH_FE_INT_DLY_INIT); ++ ++ ei_xmit_housekeeping(0); ++ ++ if (((recv == 1) || (pending_recv ==1)) && (tx_ring_full==0)) ++ { ++ reg_int_mask = sysRegRead(RAETH_FE_INT_ENABLE); ++ sysRegWrite(RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, reg_int_mask & ~(RX_DLY_INT)); ++ pending_recv=0; ++ schedule_work(&ei_local->rx_wq); ++ } ++ else if (recv == 1 && tx_ring_full==1) ++ { ++ pending_recv=1; ++ } ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ return IRQ_HANDLED; ++} ++ ++static void esw_link_status_changed(int port_no, void *dev_id) ++{ ++ unsigned int reg_val; ++ mii_mgr_read(31, (0x3008 + (port_no*0x100)), ®_val); ++ if(reg_val & 0x1) { ++ printk("ESW: Link Status Changed - Port%d Link UP\n", port_no); ++ } else { ++ printk("ESW: Link Status Changed - Port%d Link Down\n", port_no); ++ } ++} ++ ++ ++static irqreturn_t esw_interrupt(int irq, void *dev_id) ++{ ++ unsigned long flags; ++ unsigned int reg_int_val; ++ struct net_device *dev = (struct net_device *) dev_id; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ mii_mgr_read(31, 0x700c, ®_int_val); ++ ++ if (reg_int_val & P4_LINK_CH) { ++ esw_link_status_changed(4, dev_id); ++ } ++ ++ if (reg_int_val & P3_LINK_CH) { ++ esw_link_status_changed(3, dev_id); ++ } ++ if (reg_int_val & P2_LINK_CH) { ++ esw_link_status_changed(2, dev_id); ++ } ++ if (reg_int_val & P1_LINK_CH) { ++ esw_link_status_changed(1, dev_id); ++ } ++ if (reg_int_val & P0_LINK_CH) { ++ esw_link_status_changed(0, dev_id); ++ } ++ ++ mii_mgr_write(31, 0x700c, 0x1f); //ack switch link change ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ return IRQ_HANDLED; ++} ++ ++ ++ ++static int ei_start_xmit_fake(struct sk_buff* skb, struct net_device *dev) ++{ ++ return ei_start_xmit(skb, dev, 1); ++} ++ ++static int ei_change_mtu(struct net_device *dev, int new_mtu) ++{ ++ unsigned long flags; ++ END_DEVICE *ei_local = netdev_priv(dev); // get priv ei_local pointer from net_dev structure ++ ++ if ( ei_local == NULL ) { ++ printk(KERN_EMERG "%s: ei_change_mtu passed a non-existent private pointer from net_dev!\n", dev->name); ++ return -ENXIO; ++ } ++ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ ++ if ( (new_mtu > 4096) || (new_mtu < 64)) { ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return -EINVAL; ++ } ++ ++ if ( new_mtu > 1500 ) { ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return -EINVAL; ++ } ++ ++ dev->mtu = new_mtu; ++ ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++ ++static const struct net_device_ops ei_netdev_ops = { ++ .ndo_init = rather_probe, ++ .ndo_open = ei_open, ++ .ndo_stop = ei_close, ++ .ndo_start_xmit = ei_start_xmit_fake, ++ .ndo_set_mac_address = eth_mac_addr, ++ .ndo_change_mtu = ei_change_mtu, ++ .ndo_validate_addr = eth_validate_addr, ++}; ++ ++void ra2880_setup_dev_fptable(struct net_device *dev) ++{ ++ RAETH_PRINT(__FUNCTION__ "is called!\n"); ++ ++ dev->netdev_ops = &ei_netdev_ops; ++#define TX_TIMEOUT (5*HZ) ++ dev->watchdog_timeo = TX_TIMEOUT; ++ ++} ++ ++void fe_reset(void) ++{ ++ u32 val; ++ val = sysRegRead(RSTCTRL); ++ ++ val = val | RALINK_FE_RST; ++ sysRegWrite(RSTCTRL, val); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val); ++ val = val & ~(RALINK_FE_RST); ++ sysRegWrite(RSTCTRL, val); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RSTCTRL", RSTCTRL, val); ++} ++ ++void ei_reset_task(struct work_struct *work) ++{ ++ struct net_device *dev = dev_raether; ++ ++ ei_close(dev); ++ ei_open(dev); ++ ++ return; ++} ++ ++void ei_tx_timeout(struct net_device *dev) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ++ schedule_work(&ei_local->reset_task); ++} ++ ++int __init rather_probe(struct net_device *dev) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct sockaddr addr; ++ unsigned char mac_addr01234[5] = {0x00, 0x0C, 0x43, 0x28, 0x80}; ++ ++ fe_reset(); ++ net_srandom(jiffies); ++ memcpy(addr.sa_data, mac_addr01234, 5); ++ addr.sa_data[5] = net_random()&0xFF; ++ ei_set_mac_addr(dev, &addr); ++ spin_lock_init(&ei_local->page_lock); ++ ether_setup(dev); ++ ++ return 0; ++} ++ ++ ++int ei_open(struct net_device *dev) ++{ ++ int i, err; ++ unsigned long flags; ++ END_DEVICE *ei_local; ++ ++ ++ if (!try_module_get(THIS_MODULE)) ++ { ++ printk("%s: Cannot reserve module\n", __FUNCTION__); ++ return -1; ++ } ++ printk("Raeth %s (",RAETH_VERSION); ++ printk("Workqueue"); ++ ++ printk(")\n"); ++ ei_local = netdev_priv(dev); // get device pointer from System ++ // unsigned int flags; ++ ++ if (ei_local == NULL) ++ { ++ printk(KERN_EMERG "%s: ei_open passed a non-existent device!\n", dev->name); ++ return -ENXIO; ++ } ++ ++ /* receiving packet buffer allocation - NUM_RX_DESC x MAX_RX_LENGTH */ ++ for ( i = 0; i < NUM_RX_DESC; i++) ++ { ++ ei_local->netrx0_skbuf[i] = dev_alloc_skb(MAX_RX_LENGTH + NET_IP_ALIGN); ++ if (ei_local->netrx0_skbuf[i] == NULL ) { ++ printk("rx skbuff buffer allocation failed!"); ++ } else { ++ } ++ } ++ ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ fe_dma_init(dev); ++ fe_sw_init(); //initialize fe and switch register ++ err = request_irq( dev->irq, ei_interrupt, 0, dev->name, dev); // try to fix irq in open ++ if (err) ++ return err; ++ ++ if ( dev->dev_addr != NULL) { ++ ra2880MacAddressSet((void *)(dev->dev_addr)); ++ } else { ++ printk("dev->dev_addr is empty !\n"); ++ } ++ mii_mgr_write(31, 0x7008, 0x1f); //enable switch link change intr ++ err = request_irq(31, esw_interrupt, IRQF_DISABLED, "Ralink_ESW", dev); ++ if (err) ++ return err; ++ ++ sysRegWrite(RAETH_DLY_INT_CFG, DELAY_INT_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RAETH_DLY_INT_CFG", RAETH_DLY_INT_CFG, DELAY_INT_INIT); ++ sysRegWrite(RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "RAETH_FE_INT_ENABLE", RAETH_FE_INT_ENABLE, RAETH_FE_INT_DLY_INIT); ++ ++ INIT_WORK(&ei_local->reset_task, ei_reset_task); ++ ++ INIT_WORK(&ei_local->rx_wq, ei_receive_workq); ++ ++ netif_start_queue(dev); ++ ++ ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ ++ forward_config(dev); ++ return 0; ++} ++ ++int ei_close(struct net_device *dev) ++{ ++ int i; ++ END_DEVICE *ei_local = netdev_priv(dev); // device pointer ++ unsigned long flags; ++ spin_lock_irqsave(&(ei_local->page_lock), flags); ++ ++ cancel_work_sync(&ei_local->reset_task); ++ netif_stop_queue(dev); ++ ra2880stop(ei_local); ++ msleep(10); ++ ++ cancel_work_sync(&ei_local->rx_wq); ++ free_irq(dev->irq, dev); ++ free_irq(31, dev); ++ for ( i = 0; i < NUM_RX_DESC; i++) ++ { ++ if (ei_local->netrx0_skbuf[i] != NULL) { ++ dev_kfree_skb(ei_local->netrx0_skbuf[i]); ++ ei_local->netrx0_skbuf[i] = NULL; ++ } ++ } ++ if (ei_local->tx_ring0 != NULL) { ++ pci_free_consistent(NULL, NUM_TX_DESC*sizeof(struct PDMA_txdesc), ei_local->tx_ring0, ei_local->phy_tx_ring0); ++ } ++ pci_free_consistent(NULL, NUM_RX_DESC*sizeof(struct PDMA_rxdesc), ei_local->rx_ring0, ei_local->phy_rx_ring0); ++ ++ printk("Free TX/RX Ring Memory!\n"); ++ ++// fe_reset(); ++ spin_unlock_irqrestore(&(ei_local->page_lock), flags); ++ ++ module_put(THIS_MODULE); ++ return 0; ++} ++ ++ ++void setup_internal_gsw(void) ++{ ++ u32 i; ++ u32 regValue; ++ ++ /* reduce RGMII2 PAD driving strength */ ++ *(volatile u_long *)(PAD_RGMII2_MDIO_CFG) &= ~(0x3 << 4); ++ ++ //RGMII1=Normal mode ++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) &= ~(0x1 << 14); ++ ++ //GMAC1= RGMII mode ++ *(volatile u_long *)(SYSCFG1) &= ~(0x3 << 12); ++ ++ //enable MDIO to control MT7530 ++ regValue = le32_to_cpu(*(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60)); ++ regValue &= ~(0x3 << 12); ++ *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x60) = regValue; ++ ++ for(i=0;i<=4;i++) ++ { ++ //turn off PHY ++ mii_mgr_read(i, 0x0 ,®Value); ++ regValue |= (0x1<<11); ++ mii_mgr_write(i, 0x0, regValue); ++ } ++ mii_mgr_write(31, 0x7000, 0x3); //reset switch ++ udelay(10); ++ ++ if(sysRegRead(0xbe00000c)==0x00030101) { ++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e30b);//(GE1, Force 1000M/FD, FC ON) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e30b); ++ mii_mgr_write(31, 0x3600, 0x5e30b); ++ } else { ++ sysRegWrite(RALINK_ETH_SW_BASE+0x100, 0x2005e33b);//(GE1, Force 1000M/FD, FC ON) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x100", RALINK_ETH_SW_BASE+0x100, 0x2005e33b); ++ mii_mgr_write(31, 0x3600, 0x5e33b); ++ } ++ ++ sysRegWrite(RALINK_ETH_SW_BASE+0x200, 0x00008000);//(GE2, Link down) ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RALINK_ETH_SW_BASE+0x200", RALINK_ETH_SW_BASE+0x200, 0x00008000); ++ ++ //regValue = 0x117ccf; //Enable Port 6, P5 as GMAC5, P5 disable*/ ++ mii_mgr_read(31, 0x7804 ,®Value); ++ regValue &= ~(1<<8); //Enable Port 6 ++ regValue |= (1<<6); //Disable Port 5 ++ regValue |= (1<<13); //Port 5 as GMAC, no Internal PHY ++ ++ regValue |= (1<<16);//change HW-TRAP ++ printk("change HW-TRAP to 0x%x!!!!!!!!!!!!",regValue); ++ mii_mgr_write(31, 0x7804 ,regValue); ++ regValue = *(volatile u_long *)(RALINK_SYSCTL_BASE + 0x10); ++ regValue = (regValue >> 6) & 0x7; ++ if(regValue >= 6) { //25Mhz Xtal ++ /* do nothing */ ++ } else if(regValue >=3) { //40Mhz ++ ++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 core clock ++ mii_mgr_write(0, 14, 0x410); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x0); ++ ++ mii_mgr_write(0, 13, 0x1f); // disable MT7530 PLL ++ mii_mgr_write(0, 14, 0x40d); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x2020); ++ ++ mii_mgr_write(0, 13, 0x1f); // for MT7530 core clock = 500Mhz ++ mii_mgr_write(0, 14, 0x40e); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x119); ++ ++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 PLL ++ mii_mgr_write(0, 14, 0x40d); ++ mii_mgr_write(0, 13, 0x401f); ++ mii_mgr_write(0, 14, 0x2820); ++ ++ udelay(20); //suggest by CD ++ ++ mii_mgr_write(0, 13, 0x1f); // enable MT7530 core clock ++ mii_mgr_write(0, 14, 0x410); ++ mii_mgr_write(0, 13, 0x401f); ++ }else { //20Mhz Xtal ++ ++ /* TODO */ ++ ++ } ++ mii_mgr_write(0, 14, 0x1); /*RGMII*/ ++ ++#if 1 ++ mii_mgr_write(31, 0x7b00, 0x102); //delay setting for 10/1000M ++ mii_mgr_write(31, 0x7b04, 0x14); //delay setting for 10/1000M ++#else ++ mii_mgr_write(31, 0x7b00, 8); // delay setting for 100M ++ mii_mgr_write(31, 0x7b04, 0x14); // for 100M ++#endif ++ /*Tx Driving*/ ++ mii_mgr_write(31, 0x7a54, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a5c, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a64, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a6c, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a74, 0x44); //lower driving ++ mii_mgr_write(31, 0x7a7c, 0x44); //lower driving ++ ++ for(i=0;i<=4;i++) ++ { ++ //turn on PHY ++ mii_mgr_read(i, 0x0 ,®Value); ++ regValue &= ~(0x1<<11); ++ mii_mgr_write(i, 0x0, regValue); ++ } ++ ++ mii_mgr_read(31, 0x7808 ,®Value); ++ regValue |= (3<<16); //Enable INTR ++ mii_mgr_write(31, 0x7808 ,regValue); ++} ++ ++int __init ra2882eth_init(void) ++{ ++ int ret; ++ struct net_device *dev = alloc_etherdev(sizeof(END_DEVICE)); ++ if (!dev) ++ return -ENOMEM; ++ ++ strcpy(dev->name, DEV_NAME); ++ dev->irq = IRQ_ENET0; ++ dev->addr_len = 6; ++ dev->base_addr = RALINK_FRAME_ENGINE_BASE; ++ ++ rather_probe(dev); ++ ra2880_setup_dev_fptable(dev); ++ ++ if ( register_netdev(dev) != 0) { ++ printk(KERN_WARNING " " __FILE__ ": No ethernet port found.\n"); ++ return -ENXIO; ++ } ++ ret = 0; ++ ++ dev_raether = dev; ++ return ret; ++} ++ ++void fe_sw_init(void) ++{ ++ setup_internal_gsw(); ++} ++ ++ ++void ra2882eth_cleanup_module(void) ++{ ++} ++EXPORT_SYMBOL(set_fe_dma_glo_cfg); ++module_init(ra2882eth_init); ++module_exit(ra2882eth_cleanup_module); ++MODULE_LICENSE("GPL"); +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether.h +@@ -0,0 +1,92 @@ ++#ifndef RA2882ETHEND_H ++#define RA2882ETHEND_H ++ ++#ifdef DSP_VIA_NONCACHEABLE ++#define ESRAM_BASE 0xa0800000 /* 0x0080-0000 ~ 0x00807FFF */ ++#else ++#define ESRAM_BASE 0x80800000 /* 0x0080-0000 ~ 0x00807FFF */ ++#endif ++ ++#define RX_RING_BASE ((int)(ESRAM_BASE + 0x7000)) ++#define TX_RING_BASE ((int)(ESRAM_BASE + 0x7800)) ++ ++#if defined(CONFIG_RALINK_RT2880) ++#define NUM_TX_RINGS 1 ++#else ++#define NUM_TX_RINGS 4 ++#endif ++#ifdef MEMORY_OPTIMIZATION ++#ifdef CONFIG_RAETH_ROUTER ++#define NUM_RX_DESC 128 ++#define NUM_TX_DESC 128 ++#elif CONFIG_RT_3052_ESW ++#define NUM_RX_DESC 64 ++#define NUM_TX_DESC 64 ++#else ++#define NUM_RX_DESC 128 ++#define NUM_TX_DESC 128 ++#endif ++//#define NUM_RX_MAX_PROCESS 32 ++#define NUM_RX_MAX_PROCESS 64 ++#else ++#if defined (CONFIG_RAETH_ROUTER) ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#elif defined (CONFIG_RT_3052_ESW) ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#else ++#define NUM_RX_DESC 256 ++#define NUM_TX_DESC 256 ++#endif ++#if defined(CONFIG_RALINK_RT3883) || defined(CONFIG_RALINK_MT7620) ++#define NUM_RX_MAX_PROCESS 2 ++#else ++#define NUM_RX_MAX_PROCESS 16 ++#endif ++#endif ++ ++#define DEV_NAME "eth0" ++#define DEV2_NAME "eth3" ++ ++#if defined (CONFIG_RALINK_RT6855A) || defined (CONFIG_RALINK_MT7621) ++#define GMAC0_OFFSET 0xE000 ++#define GMAC2_OFFSET 0xE006 ++#else ++#define GMAC0_OFFSET 0x28 ++#define GMAC2_OFFSET 0x22 ++#endif ++ ++#if defined(CONFIG_RALINK_RT6855A) ++#define IRQ_ENET0 22 ++#else ++#define IRQ_ENET0 11 /* hardware interrupt #3, defined in RT2880 Soc Design Spec Rev 0.03, pp43 */ ++#endif ++ ++#define FE_INT_STATUS_REG (*(volatile unsigned long *)(FE_INT_STATUS)) ++#define FE_INT_STATUS_CLEAN(reg) (*(volatile unsigned long *)(FE_INT_STATUS)) = reg ++ ++//#define RAETH_DEBUG ++#ifdef RAETH_DEBUG ++#define RAETH_PRINT(fmt, args...) printk(KERN_INFO fmt, ## args) ++#else ++#define RAETH_PRINT(fmt, args...) { } ++#endif ++ ++struct net_device_stats *ra_get_stats(struct net_device *dev); ++ ++void ei_tx_timeout(struct net_device *dev); ++int rather_probe(struct net_device *dev); ++int ei_open(struct net_device *dev); ++int ei_close(struct net_device *dev); ++ ++int ra2882eth_init(void); ++void ra2882eth_cleanup_module(void); ++ ++void ei_xmit_housekeeping(unsigned long data); ++ ++u32 mii_mgr_read(u32 phy_addr, u32 phy_register, u32 *read_data); ++u32 mii_mgr_write(u32 phy_addr, u32 phy_register, u32 write_data); ++void fe_sw_init(void); ++ ++#endif +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether_pdma.c +@@ -0,0 +1,212 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <linux/delay.h> ++#include <linux/sched.h> ++#include <asm/rt2880/rt_mmap.h> ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++ ++#define MAX_RX_LENGTH 1536 ++ ++extern int reg_dbg; ++extern struct net_device *dev_raether; ++static unsigned long tx_ring_full=0; ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern void set_fe_dma_glo_cfg(void); ++ ++int fe_dma_init(struct net_device *dev) ++{ ++ ++ int i; ++ unsigned int regVal; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ while(1) ++ { ++ regVal = sysRegRead(PDMA_GLO_CFG); ++ if((regVal & RX_DMA_BUSY)) ++ { ++ printk("\n RX_DMA_BUSY !!! "); ++ continue; ++ } ++ if((regVal & TX_DMA_BUSY)) ++ { ++ printk("\n TX_DMA_BUSY !!! "); ++ continue; ++ } ++ break; ++ } ++ ++ for (i=0;i<NUM_TX_DESC;i++){ ++ ei_local->skb_free[i]=0; ++ } ++ ei_local->free_idx =0; ++ ei_local->tx_ring0 = pci_alloc_consistent(NULL, NUM_TX_DESC * sizeof(struct PDMA_txdesc), &ei_local->phy_tx_ring0); ++ printk("\nphy_tx_ring = 0x%08x, tx_ring = 0x%p\n", ei_local->phy_tx_ring0, ei_local->tx_ring0); ++ ++ for (i=0; i < NUM_TX_DESC; i++) { ++ memset(&ei_local->tx_ring0[i],0,sizeof(struct PDMA_txdesc)); ++ ei_local->tx_ring0[i].txd_info2.LS0_bit = 1; ++ ei_local->tx_ring0[i].txd_info2.DDONE_bit = 1; ++ ++ } ++ ++ /* Initial RX Ring 0*/ ++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0); ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0; ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0); ++ ++ ++ regVal = sysRegRead(PDMA_GLO_CFG); ++ regVal &= 0x000000FF; ++ sysRegWrite(PDMA_GLO_CFG, regVal); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "PDMA_GLO_CFG", PDMA_GLO_CFG, regVal); ++ ++ regVal=sysRegRead(PDMA_GLO_CFG); ++ ++ /* Tell the adapter where the TX/RX rings are located. */ ++ sysRegWrite(TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_BASE_PTR0", TX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_tx_ring0)); ++ sysRegWrite(TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_MAX_CNT0", TX_MAX_CNT0, cpu_to_le32((u32) NUM_TX_DESC)); ++ sysRegWrite(TX_CTX_IDX0, 0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "TX_CTX_IDX0", TX_CTX_IDX0, 0); ++ sysRegWrite(PDMA_RST_CFG, PST_DTX_IDX0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DTX_IDX0); ++ ++ sysRegWrite(RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_BASE_PTR0", RX_BASE_PTR0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ sysRegWrite(RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC)); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_MAX_CNT0", RX_MAX_CNT0, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08x\n", "RX_CALC_IDX0", RX_CALC_IDX0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++ sysRegWrite(PDMA_RST_CFG, PST_DRX_IDX0); ++ if (reg_dbg) printk("-> %s 0x%08x 0x%08lx\n", "PDMA_RST_CFG", PDMA_RST_CFG, PST_DRX_IDX0); ++ ++ set_fe_dma_glo_cfg(); ++ ++ return 1; ++} ++ ++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no) ++{ ++ unsigned int length=skb->len; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ unsigned long tx_cpu_owner_idx0 = sysRegRead(TX_CTX_IDX0); ++ ++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0) ++ { ++ ei_local->stat.tx_errors++; ++ } ++ ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info1.SDP0 = virt_to_phys(skb->data); ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.SDL0 = length; ++ if (gmac_no == 1) { ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 1; ++ }else { ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info4.FPORT = 2; ++ } ++ ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit = 0; ++ tx_cpu_owner_idx0 = (tx_cpu_owner_idx0+1) % NUM_TX_DESC; ++ while(ei_local->tx_ring0[tx_cpu_owner_idx0].txd_info2.DDONE_bit == 0) ++ { ++ ei_local->stat.tx_errors++; ++ } ++ sysRegWrite(TX_CTX_IDX0, cpu_to_le32((u32)tx_cpu_owner_idx0)); ++ ++ { ++ ei_local->stat.tx_packets++; ++ ei_local->stat.tx_bytes += length; ++ } ++ ++ return length; ++} ++ ++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long flags; ++ unsigned long tx_cpu_owner_idx; ++ unsigned int tx_cpu_owner_idx_next; ++ unsigned int num_of_txd; ++ unsigned int tx_cpu_owner_idx_next2; ++ ++ dev->trans_start = jiffies; /* save the timestamp */ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ tx_cpu_owner_idx = sysRegRead(TX_CTX_IDX0); ++ num_of_txd = 1; ++ tx_cpu_owner_idx_next = (tx_cpu_owner_idx + num_of_txd) % NUM_TX_DESC; ++ ++ if(((ei_local->skb_free[tx_cpu_owner_idx]) ==0) && (ei_local->skb_free[tx_cpu_owner_idx_next]==0)){ ++ rt2880_eth_send(dev, skb, gmac_no); ++ ++ tx_cpu_owner_idx_next2 = (tx_cpu_owner_idx_next + 1) % NUM_TX_DESC; ++ ++ if(ei_local->skb_free[tx_cpu_owner_idx_next2]!=0){ ++ } ++ }else { ++ ei_local->stat.tx_dropped++; ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ ++ ei_local->skb_free[tx_cpu_owner_idx] = skb; ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++void ei_xmit_housekeeping(unsigned long unused) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct PDMA_txdesc *tx_desc; ++ unsigned long skb_free_idx; ++ unsigned long tx_dtx_idx __maybe_unused; ++ unsigned long reg_int_mask=0; ++ ++ tx_dtx_idx = sysRegRead(TX_DTX_IDX0); ++ tx_desc = ei_local->tx_ring0; ++ skb_free_idx = ei_local->free_idx; ++ if ((ei_local->skb_free[skb_free_idx]) != 0 && tx_desc[skb_free_idx].txd_info2.DDONE_bit==1) { ++ while(tx_desc[skb_free_idx].txd_info2.DDONE_bit==1 && (ei_local->skb_free[skb_free_idx])!=0 ){ ++ dev_kfree_skb_any(ei_local->skb_free[skb_free_idx]); ++ ei_local->skb_free[skb_free_idx]=0; ++ skb_free_idx = (skb_free_idx +1) % NUM_TX_DESC; ++ } ++ ++ netif_wake_queue(dev); ++ tx_ring_full=0; ++ ei_local->free_idx = skb_free_idx; ++ } ++ ++ reg_int_mask=sysRegRead(FE_INT_ENABLE); ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| TX_DLY_INT); ++} ++ ++EXPORT_SYMBOL(ei_start_xmit); ++EXPORT_SYMBOL(ei_xmit_housekeeping); ++EXPORT_SYMBOL(fe_dma_init); ++EXPORT_SYMBOL(rt2880_eth_send); +--- /dev/null ++++ b/drivers/net/ethernet/raeth/raether_qdma.c +@@ -0,0 +1,805 @@ ++#include <linux/module.h> ++#include <linux/version.h> ++#include <linux/kernel.h> ++#include <linux/types.h> ++#include <linux/pci.h> ++#include <linux/init.h> ++#include <linux/skbuff.h> ++#include <linux/if_vlan.h> ++#include <linux/if_ether.h> ++#include <linux/fs.h> ++#include <asm/uaccess.h> ++#include <asm/rt2880/surfboardint.h> ++#if defined (CONFIG_RAETH_TSO) ++#include <linux/tcp.h> ++#include <net/ipv6.h> ++#include <linux/ip.h> ++#include <net/ip.h> ++#include <net/tcp.h> ++#include <linux/in.h> ++#include <linux/ppp_defs.h> ++#include <linux/if_pppox.h> ++#endif ++#include <linux/delay.h> ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,35) ++#include <linux/sched.h> ++#endif ++ ++#if LINUX_VERSION_CODE > KERNEL_VERSION(2,6,0) ++#include <asm/rt2880/rt_mmap.h> ++#else ++#include <linux/libata-compat.h> ++#endif ++ ++#include "ra2882ethreg.h" ++#include "raether.h" ++#include "ra_mac.h" ++#include "ra_ioctl.h" ++#include "ra_rfrw.h" ++#ifdef CONFIG_RAETH_NETLINK ++#include "ra_netlink.h" ++#endif ++#if defined (CONFIG_RAETH_QOS) ++#include "ra_qos.h" ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++#include "../../../net/nat/hw_nat/ra_nat.h" ++#endif ++ ++#if defined (TASKLET_WORKQUEUE_SW) ++int init_schedule; ++int working_schedule; ++#endif ++ ++ ++#if !defined(CONFIG_RA_NAT_NONE) ++/* bruce+ ++ */ ++extern int (*ra_sw_nat_hook_rx)(struct sk_buff *skb); ++extern int (*ra_sw_nat_hook_tx)(struct sk_buff *skb, int gmac_no); ++#endif ++ ++#if defined(CONFIG_RA_CLASSIFIER)||defined(CONFIG_RA_CLASSIFIER_MODULE) ++/* Qwert+ ++ */ ++#include <asm/mipsregs.h> ++extern int (*ra_classifier_hook_tx)(struct sk_buff *skb, unsigned long cur_cycle); ++extern int (*ra_classifier_hook_rx)(struct sk_buff *skb, unsigned long cur_cycle); ++#endif /* CONFIG_RA_CLASSIFIER */ ++ ++#if defined (CONFIG_RALINK_RT3052_MP2) ++int32_t mcast_rx(struct sk_buff * skb); ++int32_t mcast_tx(struct sk_buff * skb); ++#endif ++ ++#ifdef RA_MTD_RW_BY_NUM ++int ra_mtd_read(int num, loff_t from, size_t len, u_char *buf); ++#else ++int ra_mtd_read_nm(char *name, loff_t from, size_t len, u_char *buf); ++#endif ++ ++/* gmac driver feature set config */ ++#if defined (CONFIG_RAETH_NAPI) || defined (CONFIG_RAETH_QOS) ++#undef DELAY_INT ++#else ++#define DELAY_INT 1 ++#endif ++ ++//#define CONFIG_UNH_TEST ++/* end of config */ ++ ++#if defined (CONFIG_RAETH_JUMBOFRAME) ++#define MAX_RX_LENGTH 4096 ++#else ++#define MAX_RX_LENGTH 1536 ++#endif ++ ++extern struct net_device *dev_raether; ++ ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++static int rx_dma_owner_idx1; ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++static int rx_calc_idx1; ++#endif ++#endif ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++static int rx_calc_idx0; ++static unsigned long tx_cpu_owner_idx0=0; ++#endif ++static unsigned long tx_ring_full=0; ++ ++#if defined (CONFIG_ETHTOOL) && defined (CONFIG_RAETH_ROUTER) ++#include "ra_ethtool.h" ++extern struct ethtool_ops ra_ethtool_ops; ++#ifdef CONFIG_PSEUDO_SUPPORT ++extern struct ethtool_ops ra_virt_ethtool_ops; ++#endif // CONFIG_PSEUDO_SUPPORT // ++#endif // (CONFIG_ETHTOOL // ++ ++#ifdef CONFIG_RALINK_VISTA_BASIC ++int is_switch_175c = 1; ++#endif ++ ++//skb->mark to queue mapping table ++extern unsigned int M2Q_table[64]; ++ ++ ++#define KSEG1 0xa0000000 ++#define PHYS_TO_VIRT(x) ((void *)((x) | KSEG1)) ++#define VIRT_TO_PHYS(x) ((unsigned long)(x) & ~KSEG1) ++ ++extern void set_fe_dma_glo_cfg(void); ++ ++ ++/** ++ * ++ * @brief: get the TXD index from its address ++ * ++ * @param: cpu_ptr ++ * ++ * @return: TXD index ++*/ ++ ++static unsigned int GET_TXD_OFFSET(struct QDMA_txdesc **cpu_ptr) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ int ctx_offset; ++ ctx_offset = (((((u32)*cpu_ptr) <<8)>>8) - ((((u32)ei_local->txd_pool)<<8)>>8))/ sizeof(struct QDMA_txdesc); ++ ctx_offset = (*cpu_ptr - ei_local->txd_pool); ++ ++ return ctx_offset; ++} ++ ++ ++ ++/** ++ * @brief get free TXD from TXD queue ++ * ++ * @param free_txd ++ * ++ * @return ++ */ ++static int get_free_txd(struct QDMA_txdesc **free_txd) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned int tmp_idx; ++ ++ if(ei_local->free_txd_num > 0){ ++ tmp_idx = ei_local->free_txd_head; ++ ei_local->free_txd_head = ei_local->txd_pool_info[tmp_idx]; ++ ei_local->free_txd_num -= 1; ++ *free_txd = &ei_local->txd_pool[tmp_idx]; ++ return tmp_idx; ++ }else ++ return NUM_TX_DESC; ++} ++ ++ ++/** ++ * @brief add free TXD into TXD queue ++ * ++ * @param free_txd ++ * ++ * @return ++ */ ++int put_free_txd(int free_txd_idx) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ ei_local->txd_pool_info[ei_local->free_txd_tail] = free_txd_idx; ++ ei_local->free_txd_tail = free_txd_idx; ++ ei_local->txd_pool_info[free_txd_idx] = NUM_TX_DESC; ++ ei_local->free_txd_num += 1; ++ return 1; ++} ++ ++/*define qdma initial alloc*/ ++/** ++ * @brief ++ * ++ * @param net_dev ++ * ++ * @return 0: fail ++ * 1: success ++ */ ++bool qdma_tx_desc_alloc(void) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++ struct QDMA_txdesc *free_txd = NULL; ++ unsigned int txd_idx; ++ int i = 0; ++ ++ ++ ei_local->txd_pool = pci_alloc_consistent(NULL, sizeof(struct QDMA_txdesc) * NUM_TX_DESC, &ei_local->phy_txd_pool); ++ printk("txd_pool=%p phy_txd_pool=%08X\n", ei_local->txd_pool , ei_local->phy_txd_pool); ++ ++ if (ei_local->txd_pool == NULL) { ++ printk("adapter->txd_pool allocation failed!\n"); ++ return 0; ++ } ++ printk("ei_local->skb_free start address is 0x%p.\n", ei_local->skb_free); ++ //set all txd_pool_info to 0. ++ for ( i = 0; i < NUM_TX_DESC; i++) ++ { ++ ei_local->skb_free[i]= 0; ++ ei_local->txd_pool_info[i] = i + 1; ++ ei_local->txd_pool[i].txd_info3.LS_bit = 1; ++ ei_local->txd_pool[i].txd_info3.OWN_bit = 1; ++ } ++ ++ ei_local->free_txd_head = 0; ++ ei_local->free_txd_tail = NUM_TX_DESC - 1; ++ ei_local->free_txd_num = NUM_TX_DESC; ++ ++ ++ //get free txd from txd pool ++ txd_idx = get_free_txd(&free_txd); ++ if( txd_idx == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ ++ //add null TXD for transmit ++ ei_local->tx_dma_ptr = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ sysRegWrite(QTX_DTX_PTR, ei_local->tx_dma_ptr); ++ ++ //get free txd from txd pool ++ ++ txd_idx = get_free_txd(&free_txd); ++ if( txd_idx == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ // add null TXD for release ++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(free_txd)); ++ sysRegWrite(QTX_DRX_PTR, VIRT_TO_PHYS(free_txd)); ++ ++ printk("free_txd: %p, ei_local->cpu_ptr: %08X\n", free_txd, ei_local->tx_cpu_ptr); ++ ++ printk(" POOL HEAD_PTR | DMA_PTR | CPU_PTR \n"); ++ printk("----------------+---------+--------\n"); ++#if 1 ++ printk(" 0x%p 0x%08X 0x%08X\n",ei_local->txd_pool, ++ ei_local->tx_dma_ptr, ei_local->tx_cpu_ptr); ++#endif ++ return 1; ++} ++ ++bool fq_qdma_init(void) ++{ ++ struct QDMA_txdesc *free_head = NULL; ++ unsigned int free_head_phy; ++ unsigned int free_tail_phy; ++ unsigned int *free_page_head = NULL; ++ unsigned int free_page_head_phy; ++ int i; ++ ++ free_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * sizeof(struct QDMA_txdesc), &free_head_phy); ++ if (unlikely(free_head == NULL)){ ++ printk(KERN_ERR "QDMA FQ decriptor not available...\n"); ++ return 0; ++ } ++ memset(free_head, 0x0, sizeof(struct QDMA_txdesc) * NUM_QDMA_PAGE); ++ ++ free_page_head = pci_alloc_consistent(NULL, NUM_QDMA_PAGE * QDMA_PAGE_SIZE, &free_page_head_phy); ++ if (unlikely(free_page_head == NULL)){ ++ printk(KERN_ERR "QDMA FQ pager not available...\n"); ++ return 0; ++ } ++ for (i=0; i < NUM_QDMA_PAGE; i++) { ++ free_head[i].txd_info1.SDP = (free_page_head_phy + (i * QDMA_PAGE_SIZE)); ++ if(i < (NUM_QDMA_PAGE-1)){ ++ free_head[i].txd_info2.NDP = (free_head_phy + ((i+1) * sizeof(struct QDMA_txdesc))); ++ ++ ++#if 0 ++ printk("free_head_phy[%d] is 0x%x!!!\n",i, VIRT_TO_PHYS(&free_head[i]) ); ++ printk("free_head[%d] is 0x%x!!!\n",i, &free_head[i] ); ++ printk("free_head[%d].txd_info1.SDP is 0x%x!!!\n",i, free_head[i].txd_info1.SDP ); ++ printk("free_head[%d].txd_info2.NDP is 0x%x!!!\n",i, free_head[i].txd_info2.NDP ); ++#endif ++ } ++ free_head[i].txd_info3.SDL = QDMA_PAGE_SIZE; ++ ++ } ++ free_tail_phy = (free_head_phy + (u32)((NUM_QDMA_PAGE-1) * sizeof(struct QDMA_txdesc))); ++ ++ printk("free_head_phy is 0x%x!!!\n", free_head_phy); ++ printk("free_tail_phy is 0x%x!!!\n", free_tail_phy); ++ sysRegWrite(QDMA_FQ_HEAD, (u32)free_head_phy); ++ sysRegWrite(QDMA_FQ_TAIL, (u32)free_tail_phy); ++ sysRegWrite(QDMA_FQ_CNT, ((NUM_TX_DESC << 16) | NUM_QDMA_PAGE)); ++ sysRegWrite(QDMA_FQ_BLEN, QDMA_PAGE_SIZE << 16); ++ return 1; ++} ++ ++int fe_dma_init(struct net_device *dev) ++{ ++ ++ int i; ++ unsigned int regVal; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ fq_qdma_init(); ++ ++ while(1) ++ { ++ regVal = sysRegRead(QDMA_GLO_CFG); ++ if((regVal & RX_DMA_BUSY)) ++ { ++ printk("\n RX_DMA_BUSY !!! "); ++ continue; ++ } ++ if((regVal & TX_DMA_BUSY)) ++ { ++ printk("\n TX_DMA_BUSY !!! "); ++ continue; ++ } ++ break; ++ } ++ /*tx desc alloc, add a NULL TXD to HW*/ ++ ++ qdma_tx_desc_alloc(); ++ ++ ++ /* Initial RX Ring 0*/ ++#ifdef CONFIG_32B_DESC ++ ei_local->rx_ring0 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL); ++ ei_local->phy_rx_ring0 = virt_to_phys(ei_local->rx_ring0); ++#else ++ ei_local->rx_ring0 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring0); ++#endif ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring0[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring0[i].rxd_info2.DDONE_bit = 0; ++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA) ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++#else ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 1; ++#endif ++ ei_local->rx_ring0[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx0_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring0 = 0x%08x, rx_ring0 = 0x%p\n",ei_local->phy_rx_ring0,ei_local->rx_ring0); ++ ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ /* Initial RX Ring 1*/ ++#ifdef CONFIG_32B_DESC ++ ei_local->rx_ring1 = kmalloc(NUM_RX_DESC * sizeof(struct PDMA_rxdesc), GFP_KERNEL); ++ ei_local->phy_rx_ring1 = virt_to_phys(ei_local->rx_ring1); ++#else ++ ei_local->rx_ring1 = pci_alloc_consistent(NULL, NUM_RX_DESC * sizeof(struct PDMA_rxdesc), &ei_local->phy_rx_ring1); ++#endif ++ for (i = 0; i < NUM_RX_DESC; i++) { ++ memset(&ei_local->rx_ring1[i],0,sizeof(struct PDMA_rxdesc)); ++ ei_local->rx_ring1[i].rxd_info2.DDONE_bit = 0; ++#if defined (CONFIG_RAETH_SCATTER_GATHER_RX_DMA) ++ ei_local->rx_ring0[i].rxd_info2.LS0 = 0; ++ ei_local->rx_ring0[i].rxd_info2.PLEN0 = MAX_RX_LENGTH; ++#else ++ ei_local->rx_ring1[i].rxd_info2.LS0 = 1; ++#endif ++ ei_local->rx_ring1[i].rxd_info1.PDP0 = dma_map_single(NULL, ei_local->netrx1_skbuf[i]->data, MAX_RX_LENGTH, PCI_DMA_FROMDEVICE); ++ } ++ printk("\nphy_rx_ring1 = 0x%08x, rx_ring1 = 0x%p\n",ei_local->phy_rx_ring1,ei_local->rx_ring1); ++#endif ++ ++ regVal = sysRegRead(QDMA_GLO_CFG); ++ regVal &= 0x000000FF; ++ sysRegWrite(QDMA_GLO_CFG, regVal); ++ regVal=sysRegRead(QDMA_GLO_CFG); ++ ++ /* Tell the adapter where the TX/RX rings are located. */ ++ ++ sysRegWrite(QRX_BASE_PTR_0, phys_to_bus((u32) ei_local->phy_rx_ring0)); ++ sysRegWrite(QRX_MAX_CNT_0, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(QRX_CRX_IDX_0, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ rx_calc_idx0 = rx_dma_owner_idx0 = sysRegRead(QRX_CRX_IDX_0); ++#endif ++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX0); ++#if defined (CONFIG_RAETH_MULTIPLE_RX_RING) ++ sysRegWrite(QRX_BASE_PTR_1, phys_to_bus((u32) ei_local->phy_rx_ring1)); ++ sysRegWrite(QRX_MAX_CNT_1, cpu_to_le32((u32) NUM_RX_DESC)); ++ sysRegWrite(QRX_CRX_IDX_1, cpu_to_le32((u32) (NUM_RX_DESC - 1))); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ rx_calc_idx1 = rx_dma_owner_idx1 = sysRegRead(QRX_CRX_IDX_1); ++#endif ++ sysRegWrite(QDMA_RST_CFG, PST_DRX_IDX1); ++#endif ++ ++ set_fe_dma_glo_cfg(); ++ ++ return 1; ++} ++ ++inline int rt2880_eth_send(struct net_device* dev, struct sk_buff *skb, int gmac_no) ++{ ++ unsigned int length=skb->len; ++ END_DEVICE* ei_local = netdev_priv(dev); ++ ++ struct QDMA_txdesc *cpu_ptr; ++ ++ struct QDMA_txdesc *dma_ptr __maybe_unused; ++ struct QDMA_txdesc *free_txd; ++ int ctx_offset; ++#if defined (CONFIG_RAETH_TSO) ++ struct iphdr *iph = NULL; ++ struct QDMA_txdesc *init_cpu_ptr; ++ struct tcphdr *th = NULL; ++ struct skb_frag_struct *frag; ++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags; ++ int i=0; ++ int init_txd_idx; ++#endif // CONFIG_RAETH_TSO // ++ ++#if defined (CONFIG_RAETH_TSOV6) ++ struct ipv6hdr *ip6h = NULL; ++#endif ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++ PSEUDO_ADAPTER *pAd; ++#endif ++ cpu_ptr = PHYS_TO_VIRT(ei_local->tx_cpu_ptr); ++ dma_ptr = PHYS_TO_VIRT(ei_local->tx_dma_ptr); ++ ctx_offset = GET_TXD_OFFSET(&cpu_ptr); ++ ei_local->skb_free[ctx_offset] = skb; ++#if defined (CONFIG_RAETH_TSO) ++ init_cpu_ptr = cpu_ptr; ++ init_txd_idx = ctx_offset; ++#endif ++ ++#if !defined (CONFIG_RAETH_TSO) ++ ++ //2. prepare data ++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data); ++ cpu_ptr->txd_info3.SDL = skb->len; ++ ++ if (gmac_no == 1) { ++ cpu_ptr->txd_info4.FPORT = 1; ++ }else { ++ cpu_ptr->txd_info4.FPORT = 2; ++ } ++ ++ ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++#if 0 ++ iph = (struct iphdr *)skb_network_header(skb); ++ if (iph->tos == 0xe0) ++ cpu_ptr->txd_info3.QID = 3; ++ else if (iph->tos == 0xa0) ++ cpu_ptr->txd_info3.QID = 2; ++ else if (iph->tos == 0x20) ++ cpu_ptr->txd_info3.QID = 1; ++ else ++ cpu_ptr->txd_info3.QID = 0; ++#endif ++ ++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ if (skb->ip_summed == CHECKSUM_PARTIAL){ ++ cpu_ptr->txd_info4.TUI_CO = 7; ++ }else { ++ cpu_ptr->txd_info4.TUI_CO = 0; ++ } ++#endif ++ ++#ifdef CONFIG_RAETH_HW_VLAN_TX ++ if(vlan_tx_tag_present(skb)) { ++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb); ++ }else { ++ cpu_ptr->txd_info4.VLAN_TAG = 0; ++ } ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) { ++ if(ra_sw_nat_hook_rx!= NULL){ ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ FOE_MAGIC_TAG(skb) = 0; ++ } ++ } ++#endif ++#if 0 ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ cpu_ptr->txd_info4.UDF = 0x2F; ++#endif ++ ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ++ //3. get NULL TXD and decrease free_tx_num by 1. ++ ctx_offset = get_free_txd(&free_txd); ++ if(ctx_offset == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); // this should not happen. free_txd_num is 2 at least. ++ return 0; ++ } ++ ++ //4. hook new TXD in the end of queue ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ++ ++ //5. move CPU_PTR to new TXD ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ cpu_ptr->txd_info3.OWN_bit = 0; ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ ++#if 0 ++ printk("----------------------------------------------\n"); ++ printk("txd_info1:%08X \n",*(int *)&cpu_ptr->txd_info1); ++ printk("txd_info2:%08X \n",*(int *)&cpu_ptr->txd_info2); ++ printk("txd_info3:%08X \n",*(int *)&cpu_ptr->txd_info3); ++ printk("txd_info4:%08X \n",*(int *)&cpu_ptr->txd_info4); ++#endif ++ ++#else //#if !defined (CONFIG_RAETH_TSO) ++ cpu_ptr->txd_info1.SDP = VIRT_TO_PHYS(skb->data); ++ cpu_ptr->txd_info3.SDL = (length - skb->data_len); ++ cpu_ptr->txd_info3.LS_bit = nr_frags ? 0:1; ++ if (gmac_no == 1) { ++ cpu_ptr->txd_info4.FPORT = 1; ++ }else { ++ cpu_ptr->txd_info4.FPORT = 2; ++ } ++ ++ cpu_ptr->txd_info4.TSO = 0; ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++#if defined (CONFIG_RAETH_CHECKSUM_OFFLOAD) && ! defined(CONFIG_RALINK_RT5350) && !defined (CONFIG_RALINK_MT7628) ++ if (skb->ip_summed == CHECKSUM_PARTIAL){ ++ cpu_ptr->txd_info4.TUI_CO = 7; ++ }else { ++ cpu_ptr->txd_info4.TUI_CO = 0; ++ } ++#endif ++ ++#ifdef CONFIG_RAETH_HW_VLAN_TX ++ if(vlan_tx_tag_present(skb)) { ++ cpu_ptr->txd_info4.VLAN_TAG = 0x10000 | vlan_tx_tag_get(skb); ++ }else { ++ cpu_ptr->txd_info4.VLAN_TAG = 0; ++ } ++#endif ++ ++#if defined (CONFIG_RA_HW_NAT) || defined (CONFIG_RA_HW_NAT_MODULE) ++ if(FOE_MAGIC_TAG(skb) == FOE_MAGIC_PPE) { ++ if(ra_sw_nat_hook_rx!= NULL){ ++ cpu_ptr->txd_info4.FPORT = 4; /* PPE */ ++ FOE_MAGIC_TAG(skb) = 0; ++ } ++ } ++#endif ++ ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ++ ctx_offset = get_free_txd(&free_txd); ++ if(ctx_offset == NUM_TX_DESC) { ++ printk("get_free_txd fail\n"); ++ return 0; ++ } ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ ++ if(nr_frags > 0) { ++ for(i=0;i<nr_frags;i++) { ++ frag = &skb_shinfo(skb)->frags[i]; ++ cpu_ptr = free_txd; ++ cpu_ptr->txd_info3.QID = M2Q_table[skb->mark]; ++ cpu_ptr->txd_info1.SDP = pci_map_page(NULL, frag->page, frag->page_offset, frag->size, PCI_DMA_TODEVICE); ++ cpu_ptr->txd_info3.SDL = frag->size; ++ cpu_ptr->txd_info3.LS_bit = (i==nr_frags-1)?1:0; ++ cpu_ptr->txd_info3.OWN_bit = 0; ++ cpu_ptr->txd_info3.SWC_bit = 1; ++ ei_local->skb_free[ctx_offset] = (i==nr_frags-1)?skb:(struct sk_buff *)0xFFFFFFFF; //MAGIC ID ++ ++ ctx_offset = get_free_txd(&free_txd); ++ cpu_ptr->txd_info2.NDP = VIRT_TO_PHYS(free_txd); ++ ei_local->tx_cpu_ptr = VIRT_TO_PHYS(free_txd); ++ } ++ ei_local->skb_free[init_txd_idx]= (struct sk_buff *)0xFFFFFFFF; //MAGIC ID ++ } ++ ++ if(skb_shinfo(skb)->gso_segs > 1) { ++ ++// TsoLenUpdate(skb->len); ++ ++ /* TCP over IPv4 */ ++ iph = (struct iphdr *)skb_network_header(skb); ++#if defined (CONFIG_RAETH_TSOV6) ++ /* TCP over IPv6 */ ++ ip6h = (struct ipv6hdr *)skb_network_header(skb); ++#endif ++ if((iph->version == 4) && (iph->protocol == IPPROTO_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++ ++ init_cpu_ptr->txd_info4.TSO = 1; ++ ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } ++ ++#if defined (CONFIG_RAETH_TSOV6) ++ /* TCP over IPv6 */ ++ //ip6h = (struct ipv6hdr *)skb_network_header(skb); ++ else if ((ip6h->version == 6) && (ip6h->nexthdr == NEXTHDR_TCP)) { ++ th = (struct tcphdr *)skb_transport_header(skb); ++#ifdef CONFIG_RAETH_RW_PDMAPTR_FROM_VAR ++ init_cpu_ptr->txd_info4.TSO = 1; ++#else ++ init_cpu_ptr->txd_info4.TSO = 1; ++#endif ++ th->check = htons(skb_shinfo(skb)->gso_size); ++ dma_cache_sync(NULL, th, sizeof(struct tcphdr), DMA_TO_DEVICE); ++ } ++#endif ++ } ++ ++ ++// dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ init_cpu_ptr->txd_info3.OWN_bit = 0; ++#endif // CONFIG_RAETH_TSO // ++ ++ sysRegWrite(QTX_CTX_PTR, ei_local->tx_cpu_ptr); ++ ++#ifdef CONFIG_PSEUDO_SUPPORT ++ if (gmac_no == 2) { ++ if (ei_local->PseudoDev != NULL) { ++ pAd = netdev_priv(ei_local->PseudoDev); ++ pAd->stat.tx_packets++; ++ pAd->stat.tx_bytes += length; ++ } ++ } else ++ ++#endif ++ { ++ ei_local->stat.tx_packets++; ++ ei_local->stat.tx_bytes += skb->len; ++ } ++ return length; ++} ++ ++int ei_start_xmit(struct sk_buff* skb, struct net_device *dev, int gmac_no) ++{ ++ END_DEVICE *ei_local = netdev_priv(dev); ++ unsigned long flags; ++ unsigned int num_of_txd; ++#if defined (CONFIG_RAETH_TSO) ++ unsigned int nr_frags = skb_shinfo(skb)->nr_frags; ++#endif ++#ifdef CONFIG_PSEUDO_SUPPORT ++ PSEUDO_ADAPTER *pAd; ++#endif ++ ++#if !defined(CONFIG_RA_NAT_NONE) ++ if(ra_sw_nat_hook_tx!= NULL) ++ { ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ if(ra_sw_nat_hook_tx(skb, gmac_no)==1){ ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ }else{ ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ } ++#endif ++ ++ ++ ++ dev->trans_start = jiffies; /* save the timestamp */ ++ spin_lock_irqsave(&ei_local->page_lock, flags); ++ dma_cache_sync(NULL, skb->data, skb->len, DMA_TO_DEVICE); ++ ++ ++//check free_txd_num before calling rt288_eth_send() ++ ++#if defined (CONFIG_RAETH_TSO) ++ num_of_txd = (nr_frags==0) ? 1 : (nr_frags + 1); ++#else ++ num_of_txd = 1; ++#endif ++ ++#if defined(CONFIG_RALINK_MT7621) ++ if(sysRegRead(0xbe00000c)==0x00030101) { ++ ei_xmit_housekeeping(0); ++ } ++#endif ++ ++ ++ if ((ei_local->free_txd_num > num_of_txd + 1) && (ei_local->free_txd_num != NUM_TX_DESC)) ++ { ++ rt2880_eth_send(dev, skb, gmac_no); // need to modify rt2880_eth_send() for QDMA ++ if (ei_local->free_txd_num < 3) ++ { ++#if defined (CONFIG_RAETH_STOP_RX_WHEN_TX_FULL) ++ netif_stop_queue(dev); ++#ifdef CONFIG_PSEUDO_SUPPORT ++ netif_stop_queue(ei_local->PseudoDev); ++#endif ++ tx_ring_full = 1; ++#endif ++ } ++ } else { ++#ifdef CONFIG_PSEUDO_SUPPORT ++ if (gmac_no == 2) ++ { ++ if (ei_local->PseudoDev != NULL) ++ { ++ pAd = netdev_priv(ei_local->PseudoDev); ++ pAd->stat.tx_dropped++; ++ } ++ } else ++#endif ++ ei_local->stat.tx_dropped++; ++ kfree_skb(skb); ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++ } ++ spin_unlock_irqrestore(&ei_local->page_lock, flags); ++ return 0; ++} ++ ++void ei_xmit_housekeeping(unsigned long unused) ++{ ++ struct net_device *dev = dev_raether; ++ END_DEVICE *ei_local = netdev_priv(dev); ++#ifndef CONFIG_RAETH_NAPI ++ unsigned long reg_int_mask=0; ++#endif ++ struct QDMA_txdesc *dma_ptr = NULL; ++ struct QDMA_txdesc *cpu_ptr = NULL; ++ struct QDMA_txdesc *tmp_ptr = NULL; ++ unsigned int htx_offset = 0; ++ ++ dma_ptr = PHYS_TO_VIRT(sysRegRead(QTX_DRX_PTR)); ++ cpu_ptr = PHYS_TO_VIRT(sysRegRead(QTX_CRX_PTR)); ++ if(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) { ++ while(cpu_ptr != dma_ptr && (cpu_ptr->txd_info3.OWN_bit == 1)) { ++ ++ //1. keep cpu next TXD ++ tmp_ptr = PHYS_TO_VIRT(cpu_ptr->txd_info2.NDP); ++ htx_offset = GET_TXD_OFFSET(&tmp_ptr); ++ //2. free skb meomry ++#if defined (CONFIG_RAETH_TSO) ++ if(ei_local->skb_free[htx_offset]!=(struct sk_buff *)0xFFFFFFFF) { ++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]); ++ } ++#else ++ dev_kfree_skb_any(ei_local->skb_free[htx_offset]); ++#endif ++ ++ //3. release TXD ++ htx_offset = GET_TXD_OFFSET(&cpu_ptr); ++ put_free_txd(htx_offset); ++ ++ netif_wake_queue(dev); ++#ifdef CONFIG_PSEUDO_SUPPORT ++ netif_wake_queue(ei_local->PseudoDev); ++#endif ++ tx_ring_full=0; ++ ++ //4. update cpu_ptr to next ptr ++ cpu_ptr = tmp_ptr; ++ } ++ } ++ sysRegWrite(QTX_CRX_PTR, VIRT_TO_PHYS(cpu_ptr)); ++#ifndef CONFIG_RAETH_NAPI ++ reg_int_mask=sysRegRead(QFE_INT_ENABLE); ++#if defined (DELAY_INT) ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask| RLS_DLY_INT); ++#else ++ ++ sysRegWrite(FE_INT_ENABLE, reg_int_mask | RLS_DONE_INT); ++#endif ++#endif //CONFIG_RAETH_NAPI// ++} ++ ++EXPORT_SYMBOL(ei_start_xmit); ++EXPORT_SYMBOL(ei_xmit_housekeeping); ++EXPORT_SYMBOL(fe_dma_init); ++EXPORT_SYMBOL(rt2880_eth_send); +--- a/drivers/net/ethernet/Kconfig ++++ b/drivers/net/ethernet/Kconfig +@@ -136,6 +136,7 @@ source "drivers/net/ethernet/packetengin + source "drivers/net/ethernet/pasemi/Kconfig" + source "drivers/net/ethernet/qlogic/Kconfig" + source "drivers/net/ethernet/ralink/Kconfig" ++source "drivers/net/ethernet/raeth/Kconfig" + source "drivers/net/ethernet/realtek/Kconfig" + source "drivers/net/ethernet/renesas/Kconfig" + source "drivers/net/ethernet/rdc/Kconfig" +--- a/drivers/net/ethernet/Makefile ++++ b/drivers/net/ethernet/Makefile +@@ -54,6 +54,7 @@ obj-$(CONFIG_NET_PACKET_ENGINE) += packe + obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/ + obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/ + obj-$(CONFIG_NET_RALINK) += ralink/ ++obj-$(CONFIG_RAETH) += raeth/ + obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/ + obj-$(CONFIG_SH_ETH) += renesas/ + obj-$(CONFIG_NET_VENDOR_RDC) += rdc/ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/board-custom.h +@@ -0,0 +1,153 @@ ++/* Copyright Statement: ++ * ++ * This software/firmware and related documentation ("MediaTek Software") are ++ * protected under relevant copyright laws. The information contained herein ++ * is confidential and proprietary to MediaTek Inc. and/or its licensors. ++ * Without the prior written permission of MediaTek inc. and/or its licensors, ++ * any reproduction, modification, use or disclosure of MediaTek Software, ++ * and information contained herein, in whole or in part, shall be strictly prohibited. ++ */ ++/* MediaTek Inc. (C) 2010. All rights reserved. ++ * ++ * BY OPENING THIS FILE, RECEIVER HEREBY UNEQUIVOCALLY ACKNOWLEDGES AND AGREES ++ * THAT THE SOFTWARE/FIRMWARE AND ITS DOCUMENTATIONS ("MEDIATEK SOFTWARE") ++ * RECEIVED FROM MEDIATEK AND/OR ITS REPRESENTATIVES ARE PROVIDED TO RECEIVER ON ++ * AN "AS-IS" BASIS ONLY. MEDIATEK EXPRESSLY DISCLAIMS ANY AND ALL WARRANTIES, ++ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE OR NONINFRINGEMENT. ++ * NEITHER DOES MEDIATEK PROVIDE ANY WARRANTY WHATSOEVER WITH RESPECT TO THE ++ * SOFTWARE OF ANY THIRD PARTY WHICH MAY BE USED BY, INCORPORATED IN, OR ++ * SUPPLIED WITH THE MEDIATEK SOFTWARE, AND RECEIVER AGREES TO LOOK ONLY TO SUCH ++ * THIRD PARTY FOR ANY WARRANTY CLAIM RELATING THERETO. RECEIVER EXPRESSLY ACKNOWLEDGES ++ * THAT IT IS RECEIVER'S SOLE RESPONSIBILITY TO OBTAIN FROM ANY THIRD PARTY ALL PROPER LICENSES ++ * CONTAINED IN MEDIATEK SOFTWARE. MEDIATEK SHALL ALSO NOT BE RESPONSIBLE FOR ANY MEDIATEK ++ * SOFTWARE RELEASES MADE TO RECEIVER'S SPECIFICATION OR TO CONFORM TO A PARTICULAR ++ * STANDARD OR OPEN FORUM. RECEIVER'S SOLE AND EXCLUSIVE REMEDY AND MEDIATEK'S ENTIRE AND ++ * CUMULATIVE LIABILITY WITH RESPECT TO THE MEDIATEK SOFTWARE RELEASED HEREUNDER WILL BE, ++ * AT MEDIATEK'S OPTION, TO REVISE OR REPLACE THE MEDIATEK SOFTWARE AT ISSUE, ++ * OR REFUND ANY SOFTWARE LICENSE FEES OR SERVICE CHARGE PAID BY RECEIVER TO ++ * MEDIATEK FOR SUCH MEDIATEK SOFTWARE AT ISSUE. ++ * ++ * The following software/firmware and/or related documentation ("MediaTek Software") ++ * have been modified by MediaTek Inc. All revisions are subject to any receiver's ++ * applicable license agreements with MediaTek Inc. ++ */ ++ ++#ifndef __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H ++#define __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H ++ ++#include <linux/autoconf.h> ++ ++/*=======================================================================*/ ++/* MT6575 SD */ ++/*=======================================================================*/ ++#ifdef MTK_EMMC_SUPPORT ++#define CFG_DEV_MSDC0 ++#endif ++#define CFG_DEV_MSDC1 ++#define CFG_DEV_MSDC2 ++#define CFG_DEV_MSDC3 ++#if defined(CONFIG_MTK_COMBO) || defined(CONFIG_MTK_COMBO_MODULE) ++/* ++SDIO slot index number used by connectivity combo chip: ++0: invalid (used by memory card) ++1: MSDC1 ++2: MSDC2 ++*/ ++#define CONFIG_MTK_WCN_CMB_SDIO_SLOT (2) /* MSDC2 */ ++#else ++#undef CONFIG_MTK_WCN_CMB_SDIO_SLOT ++#endif ++ ++#if 0 /* FIXME. */ ++/*=======================================================================*/ ++/* MT6575 UART */ ++/*=======================================================================*/ ++#define CFG_DEV_UART1 ++#define CFG_DEV_UART2 ++#define CFG_DEV_UART3 ++#define CFG_DEV_UART4 ++ ++#define CFG_UART_PORTS (4) ++ ++/*=======================================================================*/ ++/* MT6575 I2C */ ++/*=======================================================================*/ ++#define CFG_DEV_I2C ++//#define CFG_I2C_HIGH_SPEED_MODE ++//#define CFG_I2C_DMA_MODE ++ ++/*=======================================================================*/ ++/* MT6575 ADB */ ++/*=======================================================================*/ ++#define ADB_SERIAL "E1K" ++ ++#endif ++ ++/*=======================================================================*/ ++/* MT6575 NAND FLASH */ ++/*=======================================================================*/ ++#if 0 ++#define RAMDOM_READ 1<<0 ++#define CACHE_READ 1<<1 ++/******************************************************************************* ++ * NFI & ECC Configuration ++ *******************************************************************************/ ++typedef struct ++{ ++ u16 id; //deviceid+menuid ++ u8 addr_cycle; ++ u8 iowidth; ++ u16 totalsize; ++ u16 blocksize; ++ u16 pagesize; ++ u32 timmingsetting; ++ char devciename[14]; ++ u32 advancedmode; // ++}flashdev_info,*pflashdev_info; ++ ++static const flashdev_info g_FlashTable[]={ ++ //micro ++ {0xAA2C, 5, 8, 256, 128, 2048, 0x01113, "MT29F2G08ABD", 0}, ++ {0xB12C, 4, 16, 128, 128, 2048, 0x01113, "MT29F1G16ABC", 0}, ++ {0xBA2C, 5, 16, 256, 128, 2048, 0x01113, "MT29F2G16ABD", 0}, ++ {0xAC2C, 5, 8, 512, 128, 2048, 0x01113, "MT29F4G08ABC", 0}, ++ {0xBC2C, 5, 16, 512, 128, 2048, 0x44333, "MT29F4G16ABD", 0}, ++ //samsung ++ {0xBAEC, 5, 16, 256, 128, 2048, 0x01123, "K522H1GACE", 0}, ++ {0xBCEC, 5, 16, 512, 128, 2048, 0x01123, "K524G2GACB", 0}, ++ {0xDAEC, 5, 8, 256, 128, 2048, 0x33222, "K9F2G08U0A", RAMDOM_READ}, ++ {0xF1EC, 4, 8, 128, 128, 2048, 0x01123, "K9F1G08U0A", RAMDOM_READ}, ++ {0xAAEC, 5, 8, 256, 128, 2048, 0x01123, "K9F2G08R0A", 0}, ++ //hynix ++ {0xD3AD, 5, 8, 1024, 256, 2048, 0x44333, "HY27UT088G2A", 0}, ++ {0xA1AD, 4, 8, 128, 128, 2048, 0x01123, "H8BCSOPJOMCP", 0}, ++ {0xBCAD, 5, 16, 512, 128, 2048, 0x01123, "H8BCSOUNOMCR", 0}, ++ {0xBAAD, 5, 16, 256, 128, 2048, 0x01123, "H8BCSOSNOMCR", 0}, ++ //toshiba ++ {0x9598, 5, 16, 816, 128, 2048, 0x00113, "TY9C000000CMG", 0}, ++ {0x9498, 5, 16, 375, 128, 2048, 0x00113, "TY9C000000CMG", 0}, ++ {0xC198, 4, 16, 128, 128, 2048, 0x44333, "TC58NWGOS8C", 0}, ++ {0xBA98, 5, 16, 256, 128, 2048, 0x02113, "TC58NYG1S8C", 0}, ++ //st-micro ++ {0xBA20, 5, 16, 256, 128, 2048, 0x01123, "ND02CGR4B2DI6", 0}, ++ ++ // elpida ++ {0xBC20, 5, 16, 512, 128, 2048, 0x01123, "04GR4B2DDI6", 0}, ++ {0x0000, 0, 0, 0, 0, 0, 0, "xxxxxxxxxxxxx", 0} ++}; ++#endif ++ ++ ++#define NFI_DEFAULT_ACCESS_TIMING (0x44333) ++ ++//uboot only support 1 cs ++#define NFI_CS_NUM (2) ++#define NFI_DEFAULT_CS (0) ++ ++#define USE_AHB_MODE (1) ++ ++#define PLATFORM_EVB (1) ++ ++#endif /* __ARCH_ARM_MACH_MT6575_CUSTOM_BOARD_H */ ++ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/eureka_ep430.h +@@ -0,0 +1,204 @@ ++/************************************************************************** ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#ifndef _EUREKA_EP430_H ++#define _EUREKA_EP430_H ++ ++ ++#include <asm/addrspace.h> /* for KSEG1ADDR() */ ++#include <asm/byteorder.h> /* for cpu_to_le32() */ ++#include <asm/mach-ralink/rt_mmap.h> ++ ++ ++/* ++ * Because of an error/peculiarity in the Galileo chip, we need to swap the ++ * bytes when running bigendian. ++ */ ++ ++#define MV_WRITE(ofs, data) \ ++ *(volatile u32 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le32(data) ++#define MV_READ(ofs, data) \ ++ *(data) = le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++#define MV_READ_DATA(ofs) \ ++ le32_to_cpu(*(volatile u32 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_16(ofs, data) \ ++ *(volatile u16 *)(RALINK_PCI_BASE+(ofs)) = cpu_to_le16(data) ++#define MV_READ_16(ofs, data) \ ++ *(data) = le16_to_cpu(*(volatile u16 *)(RALINK_PCI_BASE+(ofs))) ++ ++#define MV_WRITE_8(ofs, data) \ ++ *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) = data ++#define MV_READ_8(ofs, data) \ ++ *(data) = *(volatile u8 *)(RALINK_PCI_BASE+(ofs)) ++ ++#define MV_SET_REG_BITS(ofs,bits) \ ++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) |= ((u32)cpu_to_le32(bits)) ++#define MV_RESET_REG_BITS(ofs,bits) \ ++ (*((volatile u32 *)(RALINK_PCI_BASE+(ofs)))) &= ~((u32)cpu_to_le32(bits)) ++ ++#define RALINK_PCI_CONFIG_ADDR 0x20 ++#define RALINK_PCI_CONFIG_DATA_VIRTUAL_REG 0x24 ++ ++#if defined(CONFIG_RALINK_RT2880) || defined(CONFIG_RALINK_RT2883) ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0010) ++#define RALINK_PCI_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0018) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ID *(volatile u32 *)(RALINK_PCI_BASE + 0x0030) ++#define RALINK_PCI_CLASS *(volatile u32 *)(RALINK_PCI_BASE + 0x0034) ++#define RALINK_PCI_SUBID *(volatile u32 *)(RALINK_PCI_BASE + 0x0038) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++#define RALINK_PCI_STATUS *(volatile u32 *)(RALINK_PCI_BASE + 0x0050) ++ ++#elif defined(CONFIG_RALINK_RT3883) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCI ++PCI1 --> PCIe ++*/ ++#define RT3883_PCI_OFFSET 0x1000 ++#define RT3883_PCIE_OFFSET 0x2000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCI_OFFSET + 0x0038) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT3883_PCIE_OFFSET + 0x0050) ++ ++#elif defined(CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) || defined(CONFIG_RALINK_MT7628) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCIe 0 ++PCI1 --> PCIe 1 ++*/ ++#define RT6855_PCIE0_OFFSET 0x2000 ++#define RT6855_PCIE1_OFFSET 0x3000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) ++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) ++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) ++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) ++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) ++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define RALINK_PCI_PCICFG_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0000) ++#define RALINK_PCI_PCIRAW_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0004) ++#define RALINK_PCI_PCIINT_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x0008) ++#define RALINK_PCI_PCIMSK_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x000C) ++#define RALINK_PCI_IMBASEBAR1_ADDR *(volatile u32 *)(RALINK_PCI_BASE + 0x001C) ++#define RALINK_PCI_MEMBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x0028) ++#define RALINK_PCI_IOBASE *(volatile u32 *)(RALINK_PCI_BASE + 0x002C) ++#define RALINK_PCI_ARBCTL *(volatile u32 *)(RALINK_PCI_BASE + 0x0080) ++ ++/* ++PCI0 --> PCIe 0 ++PCI1 --> PCIe 1 ++PCI2 --> PCIe 2 ++*/ ++#define RT6855_PCIE0_OFFSET 0x2000 ++#define RT6855_PCIE1_OFFSET 0x3000 ++#define RT6855_PCIE2_OFFSET 0x4000 ++ ++#define RALINK_PCI0_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0010) ++#define RALINK_PCI0_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0018) ++#define RALINK_PCI0_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0030) ++#define RALINK_PCI0_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0034) ++#define RALINK_PCI0_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0038) ++#define RALINK_PCI0_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0050) ++#define RALINK_PCI0_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0060) ++#define RALINK_PCI0_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE0_OFFSET + 0x0064) ++ ++#define RALINK_PCI1_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0010) ++#define RALINK_PCI1_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0018) ++#define RALINK_PCI1_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0030) ++#define RALINK_PCI1_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0034) ++#define RALINK_PCI1_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0038) ++#define RALINK_PCI1_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0050) ++#define RALINK_PCI1_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0060) ++#define RALINK_PCI1_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE1_OFFSET + 0x0064) ++ ++#define RALINK_PCI2_BAR0SETUP_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0010) ++#define RALINK_PCI2_IMBASEBAR0_ADDR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0018) ++#define RALINK_PCI2_ID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0030) ++#define RALINK_PCI2_CLASS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0034) ++#define RALINK_PCI2_SUBID *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0038) ++#define RALINK_PCI2_STATUS *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0050) ++#define RALINK_PCI2_DERR *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0060) ++#define RALINK_PCI2_ECRC *(volatile u32 *)(RALINK_PCI_BASE + RT6855_PCIE2_OFFSET + 0x0064) ++ ++#define RALINK_PCIEPHY_P0P1_CTL_OFFSET (RALINK_PCI_BASE + 0x9000) ++#define RALINK_PCIEPHY_P2_CTL_OFFSET (RALINK_PCI_BASE + 0xA000) ++ ++#elif defined(CONFIG_RALINK_RT3052) || defined(CONFIG_RALINK_RT3352) || defined(CONFIG_RALINK_RT5350) ++#else ++#error "undefined in PCI" ++#endif ++ ++#endif +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/generic.h +@@ -0,0 +1,42 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * Defines of the Palmchip boards specific address-MAP, registers, etc. ++ */ ++#ifndef __ASM_SURFBOARD_GENERIC_H ++#define __ASM_SURFBOARD_GENERIC_H ++ ++#include <asm/addrspace.h> ++#include <asm/byteorder.h> ++#include <asm/mach-ralink/rt_mmap.h> ++ ++/* ++ * Reset register. ++ */ ++#define SOFTRES_REG (KSEG1ADDR(RALINK_SYSCTL_BASE+0x34)) ++#define GORESET (0x1) ++ ++/* ++ * Power-off register ++ */ ++#define POWER_DIR_REG (KSEG1ADDR(RALINK_PIO_BASE+0x24)) ++#define POWER_DIR_OUTPUT (0x80) /* GPIO 7 */ ++#define POWER_POL_REG (KSEG1ADDR(RALINK_PIO_BASE+0x28)) ++#define POWEROFF_REG (KSEG1ADDR(RALINK_PIO_BASE+0x20)) ++#define POWEROFF (0x0) /* drive low */ ++ ++ ++#endif /* __ASM_SURFBOARD_GENERIC_H */ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/lm.h +@@ -0,0 +1,32 @@ ++#include <linux/version.h> ++ ++struct lm_device { ++ struct device dev; ++ struct resource resource; ++ unsigned int irq; ++ unsigned int id; ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++ void *lm_drvdata; ++#endif ++}; ++ ++struct lm_driver { ++ struct device_driver drv; ++ int (*probe)(struct lm_device *); ++ void (*remove)(struct lm_device *); ++ int (*suspend)(struct lm_device *, u32); ++ int (*resume)(struct lm_device *); ++}; ++ ++int lm_driver_register(struct lm_driver *drv); ++void lm_driver_unregister(struct lm_driver *drv); ++ ++int lm_device_register(struct lm_device *dev); ++ ++#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) ++# define lm_get_drvdata(lm) ((lm)->lm_drvdata) ++# define lm_set_drvdata(lm,d) do { (lm)->lm_drvdata = (d); } while (0) ++#else ++# define lm_get_drvdata(lm) dev_get_drvdata(&(lm)->dev) ++# define lm_set_drvdata(lm,d) dev_set_drvdata(&(lm)->dev, d) ++#endif +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/prom.h +@@ -0,0 +1,50 @@ ++/* ++ * Carsten Langgaard, carstenl@mips.com ++ * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * MIPS boards bootprom interface for the Linux kernel. ++ * ++ */ ++ ++#ifndef _MIPS_PROM_H ++#define _MIPS_PROM_H ++ ++extern char *prom_getcmdline(void); ++extern char *prom_getenv(char *name); ++extern void setup_prom_printf(int tty_no); ++extern void prom_setup_printf(int tty_no); ++extern void prom_printf(char *fmt, ...); ++extern void prom_init_cmdline(void); ++extern void prom_meminit(void); ++extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem); ++extern void prom_free_prom_memory (void); ++extern void mips_display_message(const char *str); ++extern void mips_display_word(unsigned int num); ++extern int get_ethernet_addr(char *ethernet_addr); ++ ++/* Memory descriptor management. */ ++#define PROM_MAX_PMEMBLOCKS 32 ++struct prom_pmemblock { ++ unsigned long base; /* Within KSEG0. */ ++ unsigned int size; /* In bytes. */ ++ unsigned int type; /* free or prom memory */ ++}; ++ ++#endif /* !(_MIPS_PROM_H) */ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/rt_mmap.h +@@ -0,0 +1,796 @@ ++/************************************************************************** ++ * ++ * BRIEF MODULE DESCRIPTION ++ * register definition for Ralink RT-series SoC ++ * ++ * Copyright 2007 Ralink Inc. ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#ifndef __RALINK_MMAP__ ++#define __RALINK_MMAP__ ++ ++#if defined (CONFIG_RALINK_RT2880_SHUTTLE) ++ ++#define RALINK_SYSCTL_BASE 0xA0300000 ++#define RALINK_TIMER_BASE 0xA0300100 ++#define RALINK_INTCL_BASE 0xA0300200 ++#define RALINK_MEMCTRL_BASE 0xA0300300 ++#define RALINK_UART_BASE 0xA0300500 ++#define RALINK_PIO_BASE 0xA0300600 ++#define RALINK_I2C_BASE 0xA0300900 ++#define RALINK_SPI_BASE 0xA0300B00 ++#define RALINK_UART_LITE_BASE 0xA0300C00 ++#define RALINK_FRAME_ENGINE_BASE 0xA0310000 ++#define RALINK_EMBEDD_ROM_BASE 0xA0400000 ++#define RALINK_PCI_BASE 0xA0500000 ++#define RALINK_11N_MAC_BASE 0xA0600000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_TIMER0 (1<<0) ++#define RALINK_INTCTL_WDTIMER (1<<1) ++#define RALINK_INTCTL_UART (1<<2) ++#define RALINK_INTCTL_PIO (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UARTLITE (1<<8) ++#define RALINK_INTCTL_ILL_ACCESS (1<<23) ++ ++//Reset Control Register ++#define RALINK_TIMER_RST (1<<1) ++#define RALINK_INTC_RST (1<<2) ++#define RALINK_MC_RST (1<<3) ++#define RALINK_CPU_RST (1<<4) ++#define RALINK_UART_RST (1<<5) ++#define RALINK_PIO_RST (1<<6) ++#define RALINK_I2C_RST (1<<9) ++#define RALINK_SPI_RST (1<<11) ++#define RALINK_UART2_RST (1<<12) ++#define RALINK_PCI_RST (1<<16) ++#define RALINK_2860_RST (1<<17) ++#define RALINK_FE_RST (1<<18) ++#define RALINK_PCM_RST (1<<19) ++ ++ ++#elif defined (CONFIG_RALINK_RT2880_MP) ++ ++#define RALINK_SYSCTL_BASE 0xA0300000 ++#define RALINK_TIMER_BASE 0xA0300100 ++#define RALINK_INTCL_BASE 0xA0300200 ++#define RALINK_MEMCTRL_BASE 0xA0300300 ++#define RALINK_UART_BASE 0xA0300500 ++#define RALINK_PIO_BASE 0xA0300600 ++#define RALINK_I2C_BASE 0xA0300900 ++#define RALINK_SPI_BASE 0xA0300B00 ++#define RALINK_UART_LITE_BASE 0x00300C00 ++#define RALINK_FRAME_ENGINE_BASE 0xA0400000 ++#define RALINK_EMBEDD_ROM_BASE 0xA0410000 ++#define RALINK_PCI_BASE 0xA0440000 ++#define RALINK_11N_MAC_BASE 0xA0480000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_TIMER0 (1<<0) ++#define RALINK_INTCTL_WDTIMER (1<<1) ++#define RALINK_INTCTL_UART (1<<2) ++#define RALINK_INTCTL_PIO (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UARTLITE (1<<8) ++#define RALINK_INTCTL_ILL_ACCESS (1<<23) ++ ++//Reset Control Register ++#define RALINK_TIMER_RST (1<<1) ++#define RALINK_INTC_RST (1<<2) ++#define RALINK_MC_RST (1<<3) ++#define RALINK_CPU_RST (1<<4) ++#define RALINK_UART_RST (1<<5) ++#define RALINK_PIO_RST (1<<6) ++#define RALINK_I2C_RST (1<<9) ++#define RALINK_SPI_RST (1<<11) ++#define RALINK_UART2_RST (1<<12) ++#define RALINK_PCI_RST (1<<16) ++#define RALINK_2860_RST (1<<17) ++#define RALINK_FE_RST (1<<18) ++#define RALINK_PCM_RST (1<<19) ++ ++#elif defined (CONFIG_RALINK_RT3052) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_PCM_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_GDMA_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_OTG_BASE 0x101C0000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_OTG_IRQN 18 ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_CPU_RST (1<<1) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_RT2872_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_OTG_RST (1<<22) ++#define RALINK_SW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++ ++#elif defined (CONFIG_RALINK_RT3352) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++ ++ ++//Clock Conf Register ++#define RALINK_UPHY1_CLK_EN (1<<20) ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++ ++#elif defined (CONFIG_RALINK_RT5350) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_USB_HOST (1<<18) ++#define RALINK_INTCTL_USB_DEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_MIPSC_RST (1<<28) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++#elif defined (CONFIG_RALINK_RT2883) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_PCM_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_GDMA_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_OTG_BASE 0x101C0000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_OTG_IRQN 18 ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_CPU_RST (1<<1) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_OTG_RST (1<<22) ++#define RALINK_PCIE_RST (1<<23) ++ ++#elif defined (CONFIG_RALINK_RT3883) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_NOR_CTRL_BASE 0xB0000700 ++#define RALINK_NAND_CTRL_BASE 0xB0000810 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_CODEC1_BASE 0xB0003000 ++#define RALINK_CODEC2_BASE 0xB0003800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++#define RALINK_PCIE_BASE 0xB0200000 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_NAND (1<<8) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_NAND_RST (1<<15) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_WLAN_RST (1<<20) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_PCIE_RST (1<<23) ++#define RALINK_PCI_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_FLASH_RST (1<<26) ++ ++//Clock Conf Register ++#define RALINK_UPHY1_CLK_EN (1<<20) ++#define RALINK_UPHY0_CLK_EN (1<<18) ++#define RALINK_GE1_CLK_EN (1<<16) ++ ++#elif defined (CONFIG_RALINK_RT6855) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_NAND_CTRL_BASE 0xB0000800 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_OTG (1<<18) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++ ++#elif defined (CONFIG_RALINK_MT7620) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400 ++#define RALINK_UART_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_NAND_CTRL_BASE 0xB0000810 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE_BASE 0x10000C00 ++#define RALINK_MIPS_CNT_BASE 0x10000D00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_CRYPTO_ENGINE_BASE 0xB0004000 ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PPE_BASE 0xB0100C00 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0x10120000 ++#define RALINK_MSDC_BASE 0xB0130000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000D00 ++#define RALINK_COMPARE 0xB0000D04 ++#define RALINK_COUNT 0xB0000D08 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_SPI (1<<11) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_CRYPTO (1<<13) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++#define RALINK_MIPS_CNT_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_UPHY1_CLK_EN (1<<22) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define RALINK_SYSCTL_BASE 0xBE000000 ++#define RALINK_TIMER_BASE 0xBE000100 ++#define RALINK_INTCL_BASE 0xBE000200 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xBE000400 ++#define RALINK_MIPS_CNT_BASE 0x1E000500 ++#define RALINK_PIO_BASE 0xBE000600 ++#define RALINK_SPDIF_BASE 0xBE000700 ++#define RALINK_I2C_BASE 0xBE000900 ++#define RALINK_I2S_BASE 0xBE000A00 ++#define RALINK_SPI_BASE 0xBE000B00 ++#define RALINK_UART_LITE1_BASE 0x1E000C00 ++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE ++#define RALINK_UART_LITE2_BASE 0x1E000D00 ++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE ++#define RALINK_UART_LITE3_BASE 0x1E000E00 ++#define RALINK_ANA_CTRL_BASE 0xBE000F00 ++#define RALINK_PCM_BASE 0xBE002000 ++#define RALINK_GDMA_BASE 0xBE002800 ++#define RALINK_NAND_CTRL_BASE 0xBE003000 ++#define RALINK_NANDECC_CTRL_BASE 0xBE003800 ++#define RALINK_CRYPTO_ENGINE_BASE 0xBE004000 ++#define RALINK_MEMCTRL_BASE 0xBE005000 ++#define RALINK_EXT_MC_ARB_BASE 0xBE006000 ++#define RALINK_HS_DMA_BASE 0xBE007000 ++#define RALINK_FRAME_ENGINE_BASE 0xBE100000 ++#define RALINK_PPE_BASE 0xBE100C00 ++#define RALINK_ETH_SW_BASE 0xBE110000 ++#define RALINK_ROM_BASE 0xBE118000 ++#define RALINK_MSDC_BASE 0xBE130000 ++#define RALINK_PCI_BASE 0xBE140000 ++#define RALINK_USB_HOST_BASE 0x1E1C0000 ++#define RALINK_11N_MAC_BASE 0xBE180000 //Unused ++ ++#define RALINK_MCNT_CFG 0xBE000500 ++#define RALINK_COMPARE 0xBE000504 ++#define RALINK_COUNT 0xBE000508 ++ ++//Interrupt Controller ++#define RALINK_INTCTL_FE (1<<3) ++#define RALINK_INTCTL_PCIE0 (1<<4) ++#define RALINK_INTCTL_SYSCTL (1<<6) ++#define RALINK_INTCTL_I2C (1<<8) ++#define RALINK_INTCTL_DRAMC (1<<9) ++#define RALINK_INTCTL_PCM (1<<10) ++#define RALINK_INTCTL_HSDMA (1<<11) ++#define RALINK_INTCTL_PIO (1<<12) ++#define RALINK_INTCTL_DMA (1<<13) ++#define RALINK_INTCTL_NFI (1<<14) ++#define RALINK_INTCTL_NFIECC (1<<15) ++#define RALINK_INTCTL_I2S (1<<16) ++#define RALINK_INTCTL_SPI (1<<17) ++#define RALINK_INTCTL_SPDIF (1<<18) ++#define RALINK_INTCTL_CRYPTO (1<<19) ++#define RALINK_INTCTL_SDXC (1<<20) ++#define RALINK_INTCTL_PCTRL (1<<21) ++#define RALINK_INTCTL_USB (1<<22) ++#define RALINK_INTCTL_SWITCH (1<<23) ++#define RALINK_INTCTL_PCIE1 (1<<24) ++#define RALINK_INTCTL_PCIE2 (1<<25) ++#define RALINK_INTCTL_UART1 (1<<26) ++#define RALINK_INTCTL_UART2 (1<<27) ++#define RALINK_INTCTL_UART3 (1<<28) ++#define RALINK_INTCTL_WDTIMER (1<<29) ++#define RALINK_INTCTL_TIMER0 (1<<30) ++#define RALINK_INTCTL_TIMER1 (1<<31) ++ ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_MCM_RST (1<<1) ++#define RALINK_HSDMA_RST (1<<2) ++#define RALINK_FE_RST (1<<6) ++#define RALINK_SPDIF_RST (1<<7) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_NAND_RST (1<<15) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UART1_RST (1<<19) ++#define RALINK_UART2_RST (1<<20) ++#define RALINK_UART3_RST (1<<21) ++#define RALINK_ETH_RST (1<<23) ++#define RALINK_PCIE0_RST (1<<24) ++#define RALINK_PCIE1_RST (1<<25) ++#define RALINK_PCIE2_RST (1<<26) ++#define RALINK_AUX_STCK_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++#define RALINK_SDXC_RST (1<<30) ++#define RALINK_PPE_RST (1<<31) ++ ++//Clock Conf Register ++#define RALINK_PCIE0_CLK_EN (1<<24) ++#define RALINK_PCIE1_CLK_EN (1<<25) ++#define RALINK_PCIE2_CLK_EN (1<<26) ++//#define RALINK_UPHY0_CLK_EN (1<<27) ++//#define RALINK_UPHY1_CLK_EN (1<<28) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#define RALINK_TESTSTAT 0xBE000018 ++#define RALINK_TESTSTAT2 0xBE00001C ++ ++#elif defined (CONFIG_RALINK_MT7628) ++ ++#define RALINK_SYSCTL_BASE 0xB0000000 ++#define RALINK_TIMER_BASE 0xB0000100 ++#define RALINK_INTCL_BASE 0xB0000200 ++#define RALINK_MEMCTRL_BASE 0xB0000300 ++#define RALINK_RBUS_MATRIXCTL_BASE 0xB0000400 ++#define RALINK_MIPS_CNT_BASE 0x10000500 ++#define RALINK_PIO_BASE 0xB0000600 ++#define RALINK_SPI_SLAVE_BASE 0xB0000700 ++#define RALINK_I2C_BASE 0xB0000900 ++#define RALINK_I2S_BASE 0xB0000A00 ++#define RALINK_SPI_BASE 0xB0000B00 ++#define RALINK_UART_LITE1_BASE 0x10000C00 ++#define RALINK_UART_LITE_BASE RALINK_UART_LITE1_BASE ++#define RALINK_UART_LITE2_BASE 0x10000D00 ++#define RALINK_UART_BASE RALINK_UART_LITE2_BASE ++#define RALINK_UART_LITE3_BASE 0x10000E00 ++#define RALINK_PCM_BASE 0xB0002000 ++#define RALINK_GDMA_BASE 0xB0002800 ++#define RALINK_AES_ENGINE_BASE 0xB0004000 ++#define RALINK_CRYPTO_ENGINE_BASE RALINK_AES_ENGINE_BASE ++#define RALINK_FRAME_ENGINE_BASE 0xB0100000 ++#define RALINK_PPE_BASE 0xB0100C00 ++#define RALINK_ETH_SW_BASE 0xB0110000 ++#define RALINK_USB_DEV_BASE 0xB0120000 ++#define RALINK_MSDC_BASE 0xB0130000 ++#define RALINK_PCI_BASE 0xB0140000 ++#define RALINK_11N_MAC_BASE 0xB0180000 ++#define RALINK_USB_HOST_BASE 0x101C0000 ++ ++#define RALINK_MCNT_CFG 0xB0000500 ++#define RALINK_COMPARE 0xB0000504 ++#define RALINK_COUNT 0xB0000508 ++ ++ ++//Interrupt Controller ++#define RALINK_INTCTL_SYSCTL (1<<0) ++#define RALINK_INTCTL_TIMER0 (1<<1) ++#define RALINK_INTCTL_WDTIMER (1<<2) ++#define RALINK_INTCTL_ILL_ACCESS (1<<3) ++#define RALINK_INTCTL_PCM (1<<4) ++#define RALINK_INTCTL_UART (1<<5) ++#define RALINK_INTCTL_PIO (1<<6) ++#define RALINK_INTCTL_DMA (1<<7) ++#define RALINK_INTCTL_PC (1<<9) ++#define RALINK_INTCTL_I2S (1<<10) ++#define RALINK_INTCTL_SPI (1<<11) ++#define RALINK_INTCTL_UARTLITE (1<<12) ++#define RALINK_INTCTL_CRYPTO (1<<13) ++#define RALINK_INTCTL_ESW (1<<17) ++#define RALINK_INTCTL_UHST (1<<18) ++#define RALINK_INTCTL_UDEV (1<<19) ++#define RALINK_INTCTL_GLOBAL (1<<31) ++ ++//Reset Control Register ++#define RALINK_SYS_RST (1<<0) ++#define RALINK_TIMER_RST (1<<8) ++#define RALINK_INTC_RST (1<<9) ++#define RALINK_MC_RST (1<<10) ++#define RALINK_PCM_RST (1<<11) ++#define RALINK_UART_RST (1<<12) ++#define RALINK_PIO_RST (1<<13) ++#define RALINK_DMA_RST (1<<14) ++#define RALINK_I2C_RST (1<<16) ++#define RALINK_I2S_RST (1<<17) ++#define RALINK_SPI_RST (1<<18) ++#define RALINK_UARTL_RST (1<<19) ++#define RALINK_FE_RST (1<<21) ++#define RALINK_UHST_RST (1<<22) ++#define RALINK_ESW_RST (1<<23) ++#define RALINK_EPHY_RST (1<<24) ++#define RALINK_UDEV_RST (1<<25) ++#define RALINK_PCIE0_RST (1<<26) ++#define RALINK_PCIE1_RST (1<<27) ++#define RALINK_MIPS_CNT_RST (1<<28) ++#define RALINK_CRYPTO_RST (1<<29) ++ ++//Clock Conf Register ++#define RALINK_UPHY0_CLK_EN (1<<25) ++#define RALINK_UPHY1_CLK_EN (1<<22) ++#define RALINK_PCIE0_CLK_EN (1<<26) ++#define RALINK_PCIE1_CLK_EN (1<<27) ++ ++//CPU PLL CFG Register ++#define CPLL_SW_CONFIG (0x1UL << 31) ++#define CPLL_MULT_RATIO_SHIFT 16 ++#define CPLL_MULT_RATIO (0x7UL << CPLL_MULT_RATIO_SHIFT) ++#define CPLL_DIV_RATIO_SHIFT 10 ++#define CPLL_DIV_RATIO (0x3UL << CPLL_DIV_RATIO_SHIFT) ++#define BASE_CLOCK 40 /* Mhz */ ++ ++#endif ++#endif +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/serial_rt2880.h +@@ -0,0 +1,443 @@ ++/************************************************************************** ++ * ++ * BRIEF MODULE DESCRIPTION ++ * serial port definition for Ralink RT2880 solution ++ * ++ * Copyright 2007 Ralink Inc. (bruce_chang@ralinktech.com.tw) ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; either version 2 of the License, or (at your ++ * option) any later version. ++ * ++ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED ++ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF ++ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN ++ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, ++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT ++ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF ++ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ++ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT ++ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF ++ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 675 Mass Ave, Cambridge, MA 02139, USA. ++ * ++ * ++ ************************************************************************** ++ * May 2007 Bruce Chang ++ * ++ * Initial Release ++ * ++ * ++ * ++ ************************************************************************** ++ */ ++ ++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++#define RT2880_UART_RBR_OFFSET 0x00 ++#define RT2880_UART_TBR_OFFSET 0x00 ++#define RT2880_UART_IER_OFFSET 0x04 ++#define RT2880_UART_IIR_OFFSET 0x08 ++#define RT2880_UART_FCR_OFFSET 0x08 ++#define RT2880_UART_LCR_OFFSET 0x0C ++#define RT2880_UART_MCR_OFFSET 0x10 ++#define RT2880_UART_LSR_OFFSET 0x14 ++#define RT2880_UART_DLL_OFFSET 0x00 ++#define RT2880_UART_DLM_OFFSET 0x04 ++#else ++#define RT2880_UART_RBR_OFFSET 0x00 ++#define RT2880_UART_TBR_OFFSET 0x04 ++#define RT2880_UART_IER_OFFSET 0x08 ++#define RT2880_UART_IIR_OFFSET 0x0C ++#define RT2880_UART_FCR_OFFSET 0x10 ++#define RT2880_UART_LCR_OFFSET 0x14 ++#define RT2880_UART_MCR_OFFSET 0x18 ++#define RT2880_UART_LSR_OFFSET 0x1C ++#define RT2880_UART_DLL_OFFSET 0x2C ++#define RT2880_UART_DLM_OFFSET 0x30 ++#endif ++ ++#define RBR(x) *(volatile u32 *)((x)+RT2880_UART_RBR_OFFSET) ++#define TBR(x) *(volatile u32 *)((x)+RT2880_UART_TBR_OFFSET) ++#define IER(x) *(volatile u32 *)((x)+RT2880_UART_IER_OFFSET) ++#define IIR(x) *(volatile u32 *)((x)+RT2880_UART_IIR_OFFSET) ++#define FCR(x) *(volatile u32 *)((x)+RT2880_UART_FCR_OFFSET) ++#define LCR(x) *(volatile u32 *)((x)+RT2880_UART_LCR_OFFSET) ++#define MCR(x) *(volatile u32 *)((x)+RT2880_UART_MCR_OFFSET) ++#define LSR(x) *(volatile u32 *)((x)+RT2880_UART_LSR_OFFSET) ++#define DLL(x) *(volatile u32 *)((x)+RT2880_UART_DLL_OFFSET) ++#define DLM(x) *(volatile u32 *)((x)+RT2880_UART_DLM_OFFSET) ++ ++ ++#if defined (CONFIG_RALINK_RT2880) || \ ++ defined (CONFIG_RALINK_RT2883) || \ ++ defined (CONFIG_RALINK_RT3883) || \ ++ defined (CONFIG_RALINK_RT3352) || \ ++ defined (CONFIG_RALINK_RT5350) || \ ++ defined (CONFIG_RALINK_RT6855) || \ ++ defined (CONFIG_RALINK_MT7620) || \ ++ defined (CONFIG_RALINK_RT3052) ++ ++#define UART_RX 0 /* In: Receive buffer (DLAB=0) */ ++ ++#define UART_TX 4 /* Out: Transmit buffer (DLAB=0) */ ++#define UART_TRG 4 /* (LCR=BF) FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels ++ * XR16C85x only ++ */ ++ ++#define UART_IER 8 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 8 /* (LCR=BF) Feature Control Register ++ * XR16C85x only ++ */ ++ ++#define UART_IIR 12 /* In: Interrupt ID Register */ ++#define UART_EFR 12 /* I/O: Extended Features Register */ ++ /* (DLAB=1, 16C660 only) */ ++ ++#define UART_FCR 16 /* Out: FIFO Control Register */ ++#define UART_LCR 20 /* Out: Line Control Register */ ++#define UART_MCR 24 /* Out: Modem Control Register */ ++#define UART_LSR 28 /* In: Line Status Register */ ++#define UART_MSR 32 /* In: Modem Status Register */ ++#define UART_SCR 36 /* I/O: Scratch Register */ ++#define UART_DLL 44 /* Out: Divisor Latch Low (DLAB=1) */ ++/* Since surfboard uart cannot be accessed by byte, using UART_DLM will cause ++ * unpredictable values to be written to the Divisor Latch ++ */ ++#define UART_DLM 48 /* Out: Divisor Latch High (DLAB=1) */ ++ ++#else ++ ++#define UART_RX 0 /* In: Receive buffer */ ++#define UART_TX 0 /* Out: Transmit buffer */ ++#define UART_DLL 0 /* Out: Divisor Latch Low */ ++#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx ++ * In: Fifo count ++ * Out: Fifo custom trigger levels */ ++ ++#define UART_DLM 4 /* Out: Divisor Latch High */ ++#define UART_IER 4 /* Out: Interrupt Enable Register */ ++#define UART_FCTR 4 /* Feature Control Register */ ++ ++#define UART_IIR 8 /* In: Interrupt ID Register */ ++#define UART_FCR 8 /* Out: FIFO Control Register */ ++#define UART_EFR 8 /* I/O: Extended Features Register */ ++ ++#define UART_LCR 12 /* Out: Line Control Register */ ++#define UART_MCR 16 /* Out: Modem Control Register */ ++#define UART_LSR 20 /* In: Line Status Register */ ++#define UART_MSR 24 /* In: Modem Status Register */ ++#define UART_SCR 28 /* I/O: Scratch Register */ ++#define UART_EMSR 28 /* Extended Mode Select Register */ ++ ++#endif ++/* ++ * DLAB=0 ++ */ ++//#define UART_IER 1 /* Out: Interrupt Enable Register */ ++#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */ ++#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */ ++#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */ ++#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */ ++/* ++ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1 ++ */ ++#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */ ++ ++//#define UART_IIR 2 /* In: Interrupt ID Register */ ++#define UART_IIR_NO_INT 0x01 /* No interrupts pending */ ++#define UART_IIR_ID 0x06 /* Mask for the interrupt ID */ ++#define UART_IIR_MSI 0x00 /* Modem status interrupt */ ++#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */ ++#define UART_IIR_RDI 0x04 /* Receiver data interrupt */ ++#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */ ++ ++//#define UART_FCR 2 /* Out: FIFO Control Register */ ++#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */ ++#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */ ++#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */ ++#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */ ++/* ++ * Note: The FIFO trigger levels are chip specific: ++ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11 ++ * PC16550D: 1 4 8 14 xx xx xx xx ++ * TI16C550A: 1 4 8 14 xx xx xx xx ++ * TI16C550C: 1 4 8 14 xx xx xx xx ++ * ST16C550: 1 4 8 14 xx xx xx xx ++ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2 ++ * NS16C552: 1 4 8 14 xx xx xx xx ++ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654 ++ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750 ++ * TI16C752: 8 16 56 60 8 16 32 56 ++ */ ++#define UART_FCR_R_TRIG_00 0x00 ++#define UART_FCR_R_TRIG_01 0x40 ++#define UART_FCR_R_TRIG_10 0x80 ++#define UART_FCR_R_TRIG_11 0xc0 ++#define UART_FCR_T_TRIG_00 0x00 ++#define UART_FCR_T_TRIG_01 0x10 ++#define UART_FCR_T_TRIG_10 0x20 ++#define UART_FCR_T_TRIG_11 0x30 ++ ++#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */ ++#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */ ++#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */ ++#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */ ++#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */ ++/* 16650 definitions */ ++#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */ ++#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */ ++#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */ ++#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */ ++#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */ ++#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ ++#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ ++#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ ++#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ ++ ++//#define UART_LCR 3 /* Out: Line Control Register */ ++/* ++ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting ++ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits. ++ */ ++#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */ ++#define UART_LCR_SBC 0x40 /* Set break control */ ++#define UART_LCR_SPAR 0x20 /* Stick parity (?) */ ++#define UART_LCR_EPAR 0x10 /* Even parity select */ ++#define UART_LCR_PARITY 0x08 /* Parity Enable */ ++#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */ ++#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */ ++#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */ ++#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */ ++#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */ ++ ++//#define UART_MCR 4 /* Out: Modem Control Register */ ++#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */ ++#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */ ++#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */ ++#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */ ++#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */ ++#define UART_MCR_OUT2 0x08 /* Out2 complement */ ++#define UART_MCR_OUT1 0x04 /* Out1 complement */ ++#define UART_MCR_RTS 0x02 /* RTS complement */ ++#define UART_MCR_DTR 0x01 /* DTR complement */ ++ ++//#define UART_LSR 5 /* In: Line Status Register */ ++#define UART_LSR_TEMT 0x40 /* Transmitter empty */ ++#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */ ++#define UART_LSR_BI 0x10 /* Break interrupt indicator */ ++#define UART_LSR_FE 0x08 /* Frame error indicator */ ++#define UART_LSR_PE 0x04 /* Parity error indicator */ ++#define UART_LSR_OE 0x02 /* Overrun error indicator */ ++#define UART_LSR_DR 0x01 /* Receiver data ready */ ++ ++//#define UART_MSR 6 /* In: Modem Status Register */ ++#define UART_MSR_DCD 0x80 /* Data Carrier Detect */ ++#define UART_MSR_RI 0x40 /* Ring Indicator */ ++#define UART_MSR_DSR 0x20 /* Data Set Ready */ ++#define UART_MSR_CTS 0x10 /* Clear to Send */ ++#define UART_MSR_DDCD 0x08 /* Delta DCD */ ++#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */ ++#define UART_MSR_DDSR 0x02 /* Delta DSR */ ++#define UART_MSR_DCTS 0x01 /* Delta CTS */ ++#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */ ++ ++//#define UART_SCR 7 /* I/O: Scratch Register */ ++ ++/* ++ * DLAB=1 ++ */ ++//#define UART_DLL 0 /* Out: Divisor Latch Low */ ++//#define UART_DLM 1 /* Out: Divisor Latch High */ ++ ++/* ++ * LCR=0xBF (or DLAB=1 for 16C660) ++ */ ++//#define UART_EFR 2 /* I/O: Extended Features Register */ ++#define UART_EFR_CTS 0x80 /* CTS flow control */ ++#define UART_EFR_RTS 0x40 /* RTS flow control */ ++#define UART_EFR_SCD 0x20 /* Special character detect */ ++#define UART_EFR_ECB 0x10 /* Enhanced control bit */ ++/* ++ * the low four bits control software flow control ++ */ ++ ++/* ++ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654 ++ */ ++#define UART_XON1 4 /* I/O: Xon character 1 */ ++#define UART_XON2 5 /* I/O: Xon character 2 */ ++#define UART_XOFF1 6 /* I/O: Xoff character 1 */ ++#define UART_XOFF2 7 /* I/O: Xoff character 2 */ ++ ++/* ++ * EFR[4]=1 MCR[6]=1, TI16C752 ++ */ ++#define UART_TI752_TCR 6 /* I/O: transmission control register */ ++#define UART_TI752_TLR 7 /* I/O: trigger level register */ ++ ++/* ++ * LCR=0xBF, XR16C85x ++ */ ++//#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx ++// * In: Fifo count ++// * Out: Fifo custom trigger levels */ ++/* ++ * These are the definitions for the Programmable Trigger Register ++ */ ++#define UART_TRG_1 0x01 ++#define UART_TRG_4 0x04 ++#define UART_TRG_8 0x08 ++#define UART_TRG_16 0x10 ++#define UART_TRG_32 0x20 ++#define UART_TRG_64 0x40 ++#define UART_TRG_96 0x60 ++#define UART_TRG_120 0x78 ++#define UART_TRG_128 0x80 ++ ++//#define UART_FCTR 1 /* Feature Control Register */ ++#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */ ++#define UART_FCTR_RTS_4DELAY 0x01 ++#define UART_FCTR_RTS_6DELAY 0x02 ++#define UART_FCTR_RTS_8DELAY 0x03 ++#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */ ++#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */ ++#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */ ++#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */ ++#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */ ++#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */ ++#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */ ++#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */ ++#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */ ++ ++/* ++ * LCR=0xBF, FCTR[6]=1 ++ */ ++//#define UART_EMSR 7 /* Extended Mode Select Register */ ++#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */ ++#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */ ++ ++/* ++ * The Intel XScale on-chip UARTs define these bits ++ */ ++#define UART_IER_DMAE 0x80 /* DMA Requests Enable */ ++#define UART_IER_UUE 0x40 /* UART Unit Enable */ ++#define UART_IER_NRZE 0x20 /* NRZ coding Enable */ ++#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */ ++ ++#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */ ++ ++#define UART_FCR_PXAR1 0x00 /* receive FIFO treshold = 1 */ ++#define UART_FCR_PXAR8 0x40 /* receive FIFO treshold = 8 */ ++#define UART_FCR_PXAR16 0x80 /* receive FIFO treshold = 16 */ ++#define UART_FCR_PXAR32 0xc0 /* receive FIFO treshold = 32 */ ++ ++ ++ ++ ++/* ++ * These register definitions are for the 16C950 ++ */ ++#define UART_ASR 0x01 /* Additional Status Register */ ++#define UART_RFL 0x03 /* Receiver FIFO level */ ++#define UART_TFL 0x04 /* Transmitter FIFO level */ ++#define UART_ICR 0x05 /* Index Control Register */ ++ ++/* The 16950 ICR registers */ ++#define UART_ACR 0x00 /* Additional Control Register */ ++#define UART_CPR 0x01 /* Clock Prescalar Register */ ++#define UART_TCR 0x02 /* Times Clock Register */ ++#define UART_CKS 0x03 /* Clock Select Register */ ++#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */ ++#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */ ++#define UART_FCL 0x06 /* Flow Control Level Lower */ ++#define UART_FCH 0x07 /* Flow Control Level Higher */ ++#define UART_ID1 0x08 /* ID #1 */ ++#define UART_ID2 0x09 /* ID #2 */ ++#define UART_ID3 0x0A /* ID #3 */ ++#define UART_REV 0x0B /* Revision */ ++#define UART_CSR 0x0C /* Channel Software Reset */ ++#define UART_NMR 0x0D /* Nine-bit Mode Register */ ++#define UART_CTR 0xFF ++ ++/* ++ * The 16C950 Additional Control Reigster ++ */ ++#define UART_ACR_RXDIS 0x01 /* Receiver disable */ ++#define UART_ACR_TXDIS 0x02 /* Receiver disable */ ++#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */ ++#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */ ++#define UART_ACR_ICRRD 0x40 /* ICR Read enable */ ++#define UART_ACR_ASREN 0x80 /* Additional status enable */ ++ ++ ++ ++/* ++ * These definitions are for the RSA-DV II/S card, from ++ * ++ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp> ++ */ ++ ++#define UART_RSA_BASE (-8) ++ ++#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */ ++ ++#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */ ++#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */ ++#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */ ++#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */ ++ ++#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */ ++ ++#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */ ++#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */ ++#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */ ++#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */ ++#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */ ++ ++#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */ ++ ++#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */ ++#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */ ++#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */ ++#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */ ++#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */ ++#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */ ++ ++#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */ ++ ++#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */ ++ ++#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */ ++ ++#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */ ++ ++/* ++ * The RSA DSV/II board has two fixed clock frequencies. One is the ++ * standard rate, and the other is 8 times faster. ++ */ ++#define SERIAL_RSA_BAUD_BASE (921600) ++#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8) ++ ++/* ++ * Extra serial register definitions for the internal UARTs ++ * in TI OMAP processors. ++ */ ++#define UART_OMAP_MDR1 0x08 /* Mode definition register */ ++#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */ ++#define UART_OMAP_SCR 0x10 /* Supplementary control register */ ++#define UART_OMAP_SSR 0x11 /* Supplementary status register */ ++#define UART_OMAP_EBLR 0x12 /* BOF length register */ ++#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */ ++#define UART_OMAP_MVER 0x14 /* Module version register */ ++#define UART_OMAP_SYSC 0x15 /* System configuration register */ ++#define UART_OMAP_SYSS 0x16 /* System status register */ ++ ++ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/sizes.h +@@ -0,0 +1,52 @@ ++/* ++ * This program is free software; you can redistribute it and/or modify ++ * it under the terms of the GNU General Public License as published by ++ * the Free Software Foundation; either version 2 of the License, or ++ * (at your option) any later version. ++ * ++ * This program is distributed in the hope that it will be useful, ++ * but WITHOUT ANY WARRANTY; without even the implied warranty of ++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++ * GNU General Public License for more details. ++ * ++ * You should have received a copy of the GNU General Public License ++ * along with this program; if not, write to the Free Software ++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA ++ */ ++/* DO NOT EDIT!! - this file automatically generated ++ * from .s file by awk -f s2h.awk ++ */ ++/* Size definitions ++ * Copyright (C) ARM Limited 1998. All rights reserved. ++ */ ++ ++#ifndef __sizes_h ++#define __sizes_h 1 ++ ++/* handy sizes */ ++#define SZ_1K 0x00000400 ++#define SZ_4K 0x00001000 ++#define SZ_8K 0x00002000 ++#define SZ_16K 0x00004000 ++#define SZ_64K 0x00010000 ++#define SZ_128K 0x00020000 ++#define SZ_256K 0x00040000 ++#define SZ_512K 0x00080000 ++ ++#define SZ_1M 0x00100000 ++#define SZ_2M 0x00200000 ++#define SZ_4M 0x00400000 ++#define SZ_8M 0x00800000 ++#define SZ_16M 0x01000000 ++#define SZ_32M 0x02000000 ++#define SZ_64M 0x04000000 ++#define SZ_128M 0x08000000 ++#define SZ_256M 0x10000000 ++#define SZ_512M 0x20000000 ++ ++#define SZ_1G 0x40000000 ++#define SZ_2G 0x80000000 ++ ++#endif ++ ++/* END */ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/surfboard.h +@@ -0,0 +1,70 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ */ ++#ifndef _SURFBOARD_H ++#define _SURFBOARD_H ++ ++#include <asm/addrspace.h> ++ ++ ++ ++/* ++ * Surfboard system clock. ++ * This is the default value and maybe overidden by System Clock passed on the ++ * command line (sysclk=). ++ */ ++#define SURFBOARD_SYSTEM_CLOCK (125000000) ++ ++/* ++ * Surfboard UART base baud rate = System Clock / 16. ++ * Ex. (14.7456 MHZ / 16) = 921600 ++ * (32.0000 MHZ / 16) = 2000000 ++ */ ++#define SURFBOARD_BAUD_DIV (16) ++#define SURFBOARD_BASE_BAUD (SURFBOARD_SYSTEM_CLOCK / SURFBOARD_BAUD_DIV) ++ ++/* ++ * Maximum number of IDE Controllers ++ * Surfboard only has one ide (ide0), so only 2 drives are ++ * possible. (no need to check for more hwifs.) ++ */ ++//#define MAX_IDE_HWIFS (1) /* Surfboard/Wakeboard */ ++#define MAX_IDE_HWIFS (2) /* Graphite board */ ++ ++#define GCMP_BASE_ADDR 0x1fbf8000 ++#define GCMP_ADDRSPACE_SZ (256 * 1024) ++ ++/* ++ * * GIC Specific definitions ++ * */ ++#define GIC_BASE_ADDR 0x1fbc0000 ++#define GIC_ADDRSPACE_SZ (128 * 1024) ++#define MIPS_GIC_IRQ_BASE (MIPS_CPU_IRQ_BASE) ++ ++/* GIC's Nomenclature for Core Interrupt Pins */ ++#define GIC_CPU_INT0 0 /* Core Interrupt 2 */ ++#define GIC_CPU_INT1 1 /* . */ ++#define GIC_CPU_INT2 2 /* . */ ++#define GIC_CPU_INT3 3 /* . */ ++#define GIC_CPU_INT4 4 /* . */ ++#define GIC_CPU_INT5 5 /* Core Interrupt 5 */ ++ ++#endif /* !(_SURFBOARD_H) */ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/surfboardint.h +@@ -0,0 +1,190 @@ ++/* ++ * Copyright (C) 2001 Palmchip Corporation. All rights reserved. ++ * ++ * ######################################################################## ++ * ++ * This program is free software; you can distribute it and/or modify it ++ * under the terms of the GNU General Public License (Version 2) as ++ * published by the Free Software Foundation. ++ * ++ * This program is distributed in the hope it will be useful, but WITHOUT ++ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or ++ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License ++ * for more details. ++ * ++ * You should have received a copy of the GNU General Public License along ++ * with this program; if not, write to the Free Software Foundation, Inc., ++ * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. ++ * ++ * ######################################################################## ++ * ++ * Defines for the Surfboard interrupt controller. ++ * ++ */ ++#ifndef _SURFBOARDINT_H ++#define _SURFBOARDINT_H ++ ++/* Number of IRQ supported on hw interrupt 0. */ ++#if defined (CONFIG_RALINK_RT2880) ++#define RALINK_CPU_TIMER_IRQ 6 /* mips timer */ ++#define SURFBOARDINT_GPIO 7 /* GPIO */ ++#define SURFBOARDINT_UART1 8 /* UART Lite */ ++#define SURFBOARDINT_UART 9 /* UART */ ++#define SURFBOARDINT_TIMER0 10 /* timer0 */ ++#elif defined (CONFIG_RALINK_RT3052) || defined (CONFIG_RALINK_RT3352) || defined (CONFIG_RALINK_RT2883) || defined (CONFIG_RALINK_RT5350) || defined (CONFIG_RALINK_RT6855) || defined (CONFIG_RALINK_MT7620) ++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_NAND 8 /* NAND */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_SDXC 14 /* SDXC */ ++#define SURFBOARDINT_ESW 17 /* ESW */ ++#define SURFBOARDINT_UART1 12 /* UART Lite */ ++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */ ++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */ ++#define SURFBOARDINT_TIMER0 33 /* timer0 */ ++#define SURFBOARDINT_WDG 34 /* watch dog */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define SURFBOARDINT_PCM 36 /* PCM */ ++#define SURFBOARDINT_UART 37 /* UART */ ++#define RALINK_INT_PCIE0 13 /* PCIE0 */ ++#define RALINK_INT_PCIE1 14 /* PCIE1 */ ++ ++ ++#elif defined (CONFIG_RALINK_MT7628) ++#define SURFBOARDINT_SYSCTL 0 /* SYSCTL */ ++#define SURFBOARDINT_PCM 4 /* PCM */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_SPI 11 /* SPI */ ++#define SURFBOARDINT_AES 13 /* AES */ ++#define SURFBOARDINT_CRYPTO 13 /* CryptoEngine */ ++#define SURFBOARDINT_SDXC 14 /* SDXC */ ++#define SURFBOARDINT_ESW 17 /* ESW */ ++#define SURFBOARDINT_USB 18 /* USB */ ++#define SURFBOARDINT_UART_LITE1 20 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE2 21 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE3 22 /* UART Lite */ ++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 ++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 ++#define SURFBOARDINT_WDG 23 /* WDG timer */ ++#define SURFBOARDINT_TIMER0 24 /* Timer0 */ ++#define SURFBOARDINT_TIMER1 25 /* Timer1 */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define RALINK_INT_PCIE0 2 /* PCIE0 */ ++ ++ ++#elif defined (CONFIG_RALINK_MT7621) ++ ++#define SURFBOARDINT_FE 3 /* FE */ ++#define SURFBOARDINT_PCIE0 4 /* PCIE0 */ ++#define SURFBOARDINT_SYSCTL 6 /* SYSCTL */ ++#define SURFBOARDINT_I2C 8 /* I2C */ ++#define SURFBOARDINT_DRAMC 9 /* DRAMC */ ++#define SURFBOARDINT_PCM 10 /* PCM */ ++#define SURFBOARDINT_HSGDMA 11 /* HSGDMA */ ++#define SURFBOARDINT_GPIO 12 /* GPIO */ ++#define SURFBOARDINT_DMA 13 /* GDMA */ ++#define SURFBOARDINT_NAND 14 /* NAND */ ++#define SURFBOARDINT_NAND_ECC 15 /* NFI ECC */ ++#define SURFBOARDINT_I2S 16 /* I2S */ ++#define SURFBOARDINT_SPI 17 /* SPI */ ++#define SURFBOARDINT_SPDIF 18 /* SPDIF */ ++#define SURFBOARDINT_CRYPTO 19 /* CryptoEngine */ ++#define SURFBOARDINT_SDXC 20 /* SDXC */ ++#define SURFBOARDINT_PCTRL 21 /* Performance counter */ ++#define SURFBOARDINT_USB 22 /* USB */ ++#define SURFBOARDINT_ESW 31 /* Switch */ ++#define SURFBOARDINT_PCIE1 24 /* PCIE1 */ ++#define SURFBOARDINT_PCIE2 25 /* PCIE2 */ ++#define SURFBOARDINT_UART_LITE1 26 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE2 27 /* UART Lite */ ++#define SURFBOARDINT_UART_LITE3 28 /* UART Lite */ ++#define SURFBOARDINT_UART SURFBOARDINT_UART_LITE2 //ttyS0 ++#define SURFBOARDINT_UART1 SURFBOARDINT_UART_LITE1 //ttyS1 ++ ++#define SURFBOARDINT_WDG 29 /* WDG timer */ ++#define SURFBOARDINT_TIMER0 30 /* Timer0 */ ++#define SURFBOARDINT_TIMER1 31 /* Timer1 */ ++ ++#define RALINK_INT_PCIE0 SURFBOARDINT_PCIE0 ++#define RALINK_INT_PCIE1 SURFBOARDINT_PCIE1 ++#define RALINK_INT_PCIE2 SURFBOARDINT_PCIE2 ++ ++#elif defined (CONFIG_RALINK_RT3883) ++#define RALINK_CPU_TIMER_IRQ 5 /* mips timer */ ++#define SURFBOARDINT_GPIO 6 /* GPIO */ ++#define SURFBOARDINT_DMA 7 /* DMA */ ++#define SURFBOARDINT_NAND 8 /* NAND */ ++#define SURFBOARDINT_PC 9 /* Performance counter */ ++#define SURFBOARDINT_I2S 10 /* I2S */ ++#define SURFBOARDINT_UART1 12 /* UART Lite */ ++#define SURFBOARDINT_PCI 18 /* PCI */ ++#define SURFBOARDINT_UDEV 19 /* USB Device */ ++#define SURFBOARDINT_UHST 20 /* USB Host */ ++#define SURFBOARDINT_SYSCTL 32 /* SYSCTL */ ++#define SURFBOARDINT_TIMER0 33 /* timer0 */ ++#define SURFBOARDINT_ILL_ACC 35 /* illegal access */ ++#define SURFBOARDINT_PCM 36 /* PCM */ ++#define SURFBOARDINT_UART 37 /* UART */ ++#endif ++ ++#define SURFBOARDINT_END 64 ++#define RT2880_INTERINT_START 40 ++ ++/* Global interrupt bit definitions */ ++#define C_SURFBOARD_GLOBAL_INT 31 ++#define M_SURFBOARD_GLOBAL_INT (1 << C_SURFBOARD_GLOBAL_INT) ++ ++/* added ??? */ ++#define RALINK_SDRAM_ILL_ACC_ADDR *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x310) ++#define RALINK_SDRAM_ILL_ACC_TYPE *(volatile u32 *)(RALINK_SYSCTL_BASE + 0x314) ++/* end of added, bobtseng */ ++ ++/* ++ * Surfboard registers are memory mapped on 32-bit aligned boundaries and ++ * only word access are allowed. ++ */ ++#if defined (CONFIG_RALINK_MT7621) || defined (CONFIG_RALINK_MT7628) ++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x9C) //IRQ_STAT ++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0xA0) //FIQ_STAT ++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x6C) //FIQ_SEL ++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0xA4) //INT_PURE ++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x80) //IRQ_MASK_SET ++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x78) //IRQ_MASK_CLR ++#else ++#define RALINK_IRQ0STAT (RALINK_INTCL_BASE + 0x0) ++#define RALINK_IRQ1STAT (RALINK_INTCL_BASE + 0x4) ++#define RALINK_INTTYPE (RALINK_INTCL_BASE + 0x20) ++#define RALINK_INTRAW (RALINK_INTCL_BASE + 0x30) ++#define RALINK_INTENA (RALINK_INTCL_BASE + 0x34) ++#define RALINK_INTDIS (RALINK_INTCL_BASE + 0x38) ++#endif ++ ++/* bobtseng added ++, 2006.3.6. */ ++#define read_32bit_cp0_register(source) \ ++({ int __res; \ ++ __asm__ __volatile__( \ ++ ".set\tpush\n\t" \ ++ ".set\treorder\n\t" \ ++ "mfc0\t%0,"STR(source)"\n\t" \ ++ ".set\tpop" \ ++ : "=r" (__res)); \ ++ __res;}) ++ ++#define write_32bit_cp0_register(register,value) \ ++ __asm__ __volatile__( \ ++ "mtc0\t%0,"STR(register)"\n\t" \ ++ "nop" \ ++ : : "r" (value)); ++ ++/* bobtseng added --, 2006.3.6. */ ++ ++void surfboardint_init(void); ++u32 get_surfboard_sysclk(void); ++ ++ ++#endif /* !(_SURFBOARDINT_H) */ +--- /dev/null ++++ b/arch/mips/include/asm/rt2880/war.h +@@ -0,0 +1,25 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org> ++ */ ++#ifndef __ASM_MIPS_MACH_MIPS_WAR_H ++#define __ASM_MIPS_MACH_MIPS_WAR_H ++ ++#define R4600_V1_INDEX_ICACHEOP_WAR 0 ++#define R4600_V1_HIT_CACHEOP_WAR 0 ++#define R4600_V2_HIT_CACHEOP_WAR 0 ++#define R5432_CP0_INTERRUPT_WAR 0 ++#define BCM1250_M3_WAR 0 ++#define SIBYTE_1956_WAR 0 ++#define MIPS4K_ICACHE_REFILL_WAR 1 ++#define MIPS_CACHE_SYNC_WAR 1 ++#define TX49XX_ICACHE_INDEX_INV_WAR 0 ++#define RM9000_CDEX_SMP_WAR 0 ++#define ICACHE_REFILLS_WORKAROUND_WAR 1 ++#define R10000_LLSC_WAR 0 ++#define MIPS34K_MISSED_ITLB_WAR 0 ++ ++#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */ diff --git a/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch b/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch new file mode 100644 index 0000000000..05d95484da --- /dev/null +++ b/target/linux/ramips/patches-3.10/0217-pinmux-rt2880.patch @@ -0,0 +1,88 @@ +Index: linux-3.10.32/arch/mips/ralink/rt288x.c +=================================================================== +--- linux-3.10.32.orig/arch/mips/ralink/rt288x.c 2014-02-22 20:41:54.000000000 +0000 ++++ linux-3.10.32/arch/mips/ralink/rt288x.c 2014-03-18 11:18:06.689596876 +0000 +@@ -17,46 +17,27 @@ + #include <asm/mipsregs.h> + #include <asm/mach-ralink/ralink_regs.h> + #include <asm/mach-ralink/rt288x.h> ++#include <asm/mach-ralink/pinmux.h> + + #include "common.h" + +-static struct ralink_pinmux_grp mode_mux[] = { +- { +- .name = "i2c", +- .mask = RT2880_GPIO_MODE_I2C, +- .gpio_first = 1, +- .gpio_last = 2, +- }, { +- .name = "spi", +- .mask = RT2880_GPIO_MODE_SPI, +- .gpio_first = 3, +- .gpio_last = 6, +- }, { +- .name = "uartlite", +- .mask = RT2880_GPIO_MODE_UART0, +- .gpio_first = 7, +- .gpio_last = 14, +- }, { +- .name = "jtag", +- .mask = RT2880_GPIO_MODE_JTAG, +- .gpio_first = 17, +- .gpio_last = 21, +- }, { +- .name = "mdio", +- .mask = RT2880_GPIO_MODE_MDIO, +- .gpio_first = 22, +- .gpio_last = 23, +- }, { +- .name = "sdram", +- .mask = RT2880_GPIO_MODE_SDRAM, +- .gpio_first = 24, +- .gpio_last = 39, +- }, { +- .name = "pci", +- .mask = RT2880_GPIO_MODE_PCI, +- .gpio_first = 40, +- .gpio_last = 71, +- }, {0} ++static struct rt2880_pmx_func i2c_func[] = { FUNC("i2c", 0, 1, 2) }; ++static struct rt2880_pmx_func spi_func[] = { FUNC("spi", 0, 3, 6) }; ++static struct rt2880_pmx_func uartlite_func[] = { FUNC("uartlite", 0, 7, 14) }; ++static struct rt2880_pmx_func jtag_func[] = { FUNC("jtag", 0, 17, 21) }; ++static struct rt2880_pmx_func mdio_func[] = { FUNC("mdio", 0, 22, 23) }; ++static struct rt2880_pmx_func sdram_func[] = { FUNC("sdram", 0, 24, 39) }; ++static struct rt2880_pmx_func pci_func[] = { FUNC("pci", 0, 40, 71) }; ++ ++static struct rt2880_pmx_group rt2880_pinmux_data_act[] = { ++ GRP("i2c", i2c_func, 1, RT2880_GPIO_MODE_I2C), ++ GRP("spi", spi_func, 1, RT2880_GPIO_MODE_SPI), ++ GRP("uartlite", uartlite_func, 1, RT2880_GPIO_MODE_UART0), ++ GRP("jtag", jtag_func, 1, RT2880_GPIO_MODE_JTAG), ++ GRP("mdio", mdio_func, 1, RT2880_GPIO_MODE_MDIO), ++ GRP("sdram", sdram_func, 1, RT2880_GPIO_MODE_SDRAM), ++ GRP("pci", pci_func, 1, RT2880_GPIO_MODE_PCI), ++ { 0 } + }; + + static void rt288x_wdt_reset(void) +@@ -69,11 +50,6 @@ + rt_sysc_w32(t, SYSC_REG_CLKCFG); + } + +-struct ralink_pinmux rt_gpio_pinmux = { +- .mode = mode_mux, +- .wdt_reset = rt288x_wdt_reset, +-}; +- + void __init ralink_clk_init(void) + { + unsigned long cpu_rate; +@@ -140,4 +116,6 @@ + soc_info->mem_base = RT2880_SDRAM_BASE; + soc_info->mem_size_min = RT2880_MEM_SIZE_MIN; + soc_info->mem_size_max = RT2880_MEM_SIZE_MAX; ++ ++ rt2880_pinmux_data = rt2880_pinmux_data_act; + } diff --git a/target/linux/ramips/patches-3.10/0203-owrt-MIPS-add-OWRTDTB-secion.patch b/target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch index 71d8fe9982..1a00dc2dd8 100644 --- a/target/linux/ramips/patches-3.10/0203-owrt-MIPS-add-OWRTDTB-secion.patch +++ b/target/linux/ramips/patches-3.10/0300-MIPS-OWRTDTB.patch @@ -24,7 +24,7 @@ Signed-off-by: John Crispin <blogic@openwrt.org> NESTED(kernel_entry, 16, sp) # kernel entry point --- a/arch/mips/ralink/Makefile +++ b/arch/mips/ralink/Makefile -@@ -21,4 +21,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin +@@ -26,4 +26,4 @@ obj-$(CONFIG_EARLY_PRINTK) += early_prin obj-$(CONFIG_DEBUG_FS) += bootrom.o @@ -32,8 +32,8 @@ Signed-off-by: John Crispin <blogic@openwrt.org> +#obj-y += dts/ --- a/arch/mips/ralink/of.c +++ b/arch/mips/ralink/of.c -@@ -77,6 +77,8 @@ void __init device_tree_init(void) - //free_bootmem(base, size); +@@ -90,6 +90,8 @@ static int __init early_init_dt_find_mem + return 0; } +extern struct boot_param_header __image_dtb; @@ -41,12 +41,12 @@ Signed-off-by: John Crispin <blogic@openwrt.org> void __init plat_mem_setup(void) { set_io_port_base(KSEG1); -@@ -85,7 +87,7 @@ void __init plat_mem_setup(void) +@@ -98,7 +100,7 @@ void __init plat_mem_setup(void) * Load the builtin devicetree. This causes the chosen node to be * parsed resulting in our memory appearing */ - __dt_setup_arch(&__dtb_start); + __dt_setup_arch(&__image_dtb); - if (soc_info.mem_size) - add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, + of_scan_flat_dt(early_init_dt_find_memory, NULL); + if (memory_dtb) diff --git a/target/linux/ramips/patches-3.10/0501-MIPS-increase-GIC_INTR_MAX.patch b/target/linux/ramips/patches-3.10/0501-MIPS-increase-GIC_INTR_MAX.patch deleted file mode 100644 index 35ac5ed572..0000000000 --- a/target/linux/ramips/patches-3.10/0501-MIPS-increase-GIC_INTR_MAX.patch +++ /dev/null @@ -1,21 +0,0 @@ -From e5327a1c6969316370af5cae7cfe6b8163178575 Mon Sep 17 00:00:00 2001 -From: John Crispin <blogic@openwrt.org> -Date: Mon, 2 Dec 2013 16:07:23 +0100 -Subject: [PATCH 500/507] MIPS: increase GIC_INTR_MAX - -Signed-off-by: John Crispin <blogic@openwrt.org> ---- - arch/mips/include/asm/gic.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/arch/mips/include/asm/gic.h -+++ b/arch/mips/include/asm/gic.h -@@ -19,7 +19,7 @@ - #define GIC_TRIG_EDGE 1 - #define GIC_TRIG_LEVEL 0 - --#define GIC_NUM_INTRS (24 + NR_CPUS * 2) -+#define GIC_NUM_INTRS (56 + NR_CPUS * 2) - - #define MSK(n) ((1 << (n)) - 1) - #define REG32(addr) (*(volatile unsigned int *) (addr)) diff --git a/target/linux/ramips/patches-3.10/0509-MIPS-Kconfig-CMP-support-needs-to-select-SMP-as-well.patch b/target/linux/ramips/patches-3.10/0509-MIPS-Kconfig-CMP-support-needs-to-select-SMP-as-well.patch deleted file mode 100644 index 1e6afb21de..0000000000 --- a/target/linux/ramips/patches-3.10/0509-MIPS-Kconfig-CMP-support-needs-to-select-SMP-as-well.patch +++ /dev/null @@ -1,52 +0,0 @@ -From 184edf882ebb7885b49fa231a503205da94e78f0 Mon Sep 17 00:00:00 2001 -From: Markos Chandras <markos.chandras@imgtec.com> -Date: Wed, 2 Oct 2013 12:40:26 -0500 -Subject: [PATCH 065/105] MIPS: Kconfig: CMP support needs to select SMP as - well - -The CMP code is only designed to work with SMP configurations. -Fixes multiple build problems on certain randconfigs: - -In file included from arch/mips/kernel/smp-cmp.c:34:0: -arch/mips/include/asm/smp.h:28:0: -error: "raw_smp_processor_id" redefined [-Werror] - -In file included from include/linux/sched.h:30:0, -from arch/mips/kernel/smp-cmp.c:22: -include/linux/smp.h:135:0: note: this is the location of the -previous definition - -In file included from arch/mips/kernel/smp-cmp.c:34:0: -arch/mips/include/asm/smp.h:57:20: -error: redefinition of 'smp_send_reschedule' - -In file included from include/linux/sched.h:30:0, -from arch/mips/kernel/smp-cmp.c:22: -include/linux/smp.h:179:20: note: previous -definition of 'smp_send_reschedule' was here - -In file included from arch/mips/kernel/smp-cmp.c:34:0: -arch/mips/include/asm/smp.h: In function 'smp_send_reschedule': -arch/mips/include/asm/smp.h:61:8: -error: dereferencing pointer to incomplete type -[...] - -Signed-off-by: Markos Chandras <markos.chandras@imgtec.com> -Cc: linux-mips@linux-mips.org -Cc: Markos Chandras <markos.chandras@imgtec.com> -Patchwork: https://patchwork.linux-mips.org/patch/5812/ -Signed-off-by: Ralf Baechle <ralf@linux-mips.org> ---- - arch/mips/Kconfig | 1 + - 1 file changed, 1 insertion(+) - ---- a/arch/mips/Kconfig -+++ b/arch/mips/Kconfig -@@ -2038,6 +2038,7 @@ config MIPS_VPE_APSP_API - config MIPS_CMP - bool "MIPS CMP framework support" - depends on SYS_SUPPORTS_MIPS_CMP -+ select SMP - select SYNC_R4K - select SYS_SUPPORTS_SMP - select SYS_SUPPORTS_SCHED_SMT if SMP diff --git a/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch b/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch deleted file mode 100644 index 7cc81a2a6d..0000000000 --- a/target/linux/ramips/patches-3.10/0512-USB-add-xhci-support-for-mt7621.patch +++ /dev/null @@ -1,840 +0,0 @@ ---- a/drivers/usb/core/hub.c -+++ b/drivers/usb/core/hub.c -@@ -1254,7 +1254,7 @@ static void hub_quiesce(struct usb_hub * - if (type != HUB_SUSPEND) { - /* Disconnect all the children */ - for (i = 0; i < hdev->maxchild; ++i) { -- if (hub->ports[i]->child) -+ if (hub->ports[i] && hub->ports[i]->child) - usb_disconnect(&hub->ports[i]->child); - } - } ---- a/drivers/usb/core/port.c -+++ b/drivers/usb/core/port.c -@@ -193,6 +193,7 @@ exit: - void usb_hub_remove_port_device(struct usb_hub *hub, - int port1) - { -- device_unregister(&hub->ports[port1 - 1]->dev); -+ if (hub->ports[port1 - 1]) -+ device_unregister(&hub->ports[port1 - 1]->dev); - } - ---- a/drivers/usb/host/Kconfig -+++ b/drivers/usb/host/Kconfig -@@ -28,7 +28,11 @@ config USB_XHCI_HCD - if USB_XHCI_HCD - - config USB_XHCI_PLATFORM -- tristate -+ bool "xHCI platform" -+ -+config USB_MT7621_XHCI_PLATFORM -+ bool "MTK MT7621 xHCI" -+ depends on USB_XHCI_PLATFORM - - config USB_XHCI_HCD_DEBUGGING - bool "Debugging for the xHCI host controller" ---- a/drivers/usb/host/Makefile -+++ b/drivers/usb/host/Makefile -@@ -13,15 +13,23 @@ fhci-$(CONFIG_FHCI_DEBUG) += fhci-dbg.o - - xhci-hcd-y := xhci.o xhci-mem.o - xhci-hcd-y += xhci-ring.o xhci-hub.o xhci-dbg.o -+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM - xhci-hcd-$(CONFIG_PCI) += xhci-pci.o -+endif -+ -+ifdef CONFIG_USB_MT7621_XHCI_PLATFORM -+xhci-hcd-y += mtk-phy.o xhci-mtk-scheduler.o xhci-mtk-power.o xhci-mtk.o mtk-phy-7621.o mtk-phy-ahb.o -+endif - - ifneq ($(CONFIG_USB_XHCI_PLATFORM), ) -- xhci-hcd-y += xhci-plat.o -+xhci-hcd-y += xhci-plat.o - endif - - obj-$(CONFIG_USB_WHCI_HCD) += whci/ - -+ifndef CONFIG_USB_MT7621_XHCI_PLATFORM - obj-$(CONFIG_PCI) += pci-quirks.o -+endif - - obj-$(CONFIG_USB_EHCI_HCD) += ehci-hcd.o - obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o ---- a/drivers/usb/host/pci-quirks.h -+++ b/drivers/usb/host/pci-quirks.h -@@ -1,7 +1,7 @@ - #ifndef __LINUX_USB_PCI_QUIRKS_H - #define __LINUX_USB_PCI_QUIRKS_H - --#ifdef CONFIG_PCI -+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - void uhci_reset_hc(struct pci_dev *pdev, unsigned long base); - int uhci_check_and_reset_hc(struct pci_dev *pdev, unsigned long base); - #endif /* CONFIG_PCI */ ---- a/drivers/usb/host/xhci.c -+++ b/drivers/usb/host/xhci.c -@@ -30,6 +30,16 @@ - - #include "xhci.h" - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+#include <asm/uaccess.h> -+#include <linux/dma-mapping.h> -+#include <linux/platform_device.h> -+#include "mtk-phy.h" -+#include "xhci-mtk-scheduler.h" -+#include "xhci-mtk-power.h" -+#include "xhci-mtk.h" -+#endif -+ - #define DRIVER_AUTHOR "Sarah Sharp" - #define DRIVER_DESC "'eXtensible' Host Controller (xHC) Driver" - -@@ -38,6 +48,18 @@ static int link_quirk; - module_param(link_quirk, int, S_IRUGO | S_IWUSR); - MODULE_PARM_DESC(link_quirk, "Don't clear the chain bit on a link TRB"); - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+long xhci_mtk_test_unlock_ioctl(struct file *file, unsigned int cmd, unsigned long arg); -+static struct file_operations xhci_mtk_test_fops = { -+ .owner = THIS_MODULE, -+ .read = xhci_mtk_test_read, -+ .write = xhci_mtk_test_write, -+ .unlocked_ioctl = xhci_mtk_test_unlock_ioctl, -+ .open = xhci_mtk_test_open, -+ .release = xhci_mtk_test_release, -+}; -+#endif -+ - /* TODO: copied from ehci-hcd.c - can this be refactored? */ - /* - * xhci_handshake - spin reading hc until handshake completes or fails -@@ -189,7 +211,7 @@ int xhci_reset(struct xhci_hcd *xhci) - return ret; - } - --#ifdef CONFIG_PCI -+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - static int xhci_free_msi(struct xhci_hcd *xhci) - { - int i; -@@ -389,6 +411,7 @@ static int xhci_try_enable_msi(struct us - return ret; - } - hcd->irq = pdev->irq; -+ - return 0; - } - -@@ -430,6 +453,11 @@ static void compliance_mode_recovery(uns - xhci_dbg(xhci, "Attempting compliance mode recovery\n"); - hcd = xhci->shared_hcd; - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ temp |= (1 << 31); -+ xhci_writel(xhci, temp, xhci->usb3_ports[i]); -+#endif -+ - if (hcd->state == HC_STATE_SUSPENDED) - usb_hcd_resume_root_hub(hcd); - -@@ -478,6 +506,9 @@ bool xhci_compliance_mode_recovery_timer - { - const char *dmi_product_name, *dmi_sys_vendor; - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ return true; -+#endif - dmi_product_name = dmi_get_system_info(DMI_PRODUCT_NAME); - dmi_sys_vendor = dmi_get_system_info(DMI_SYS_VENDOR); - if (!dmi_product_name || !dmi_sys_vendor) -@@ -521,6 +552,10 @@ int xhci_init(struct usb_hcd *hcd) - } else { - xhci_dbg(xhci, "xHCI doesn't need link TRB QUIRK\n"); - } -+ -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ mtk_xhci_scheduler_init(); -+#endif - retval = xhci_mem_init(xhci, GFP_KERNEL); - xhci_dbg(xhci, "Finished xhci_init\n"); - -@@ -664,7 +699,11 @@ int xhci_run(struct usb_hcd *hcd) - xhci_dbg(xhci, "// Set the interrupt modulation register\n"); - temp = xhci_readl(xhci, &xhci->ir_set->irq_control); - temp &= ~ER_IRQ_INTERVAL_MASK; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ temp |= (u32) 16; -+#else - temp |= (u32) 160; -+#endif - xhci_writel(xhci, temp, &xhci->ir_set->irq_control); - - /* Set the HCD state before we enable the irqs */ -@@ -685,6 +724,9 @@ int xhci_run(struct usb_hcd *hcd) - xhci_queue_vendor_command(xhci, 0, 0, 0, - TRB_TYPE(TRB_NEC_GET_FW)); - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ enableXhciAllPortPower(xhci); -+#endif - xhci_dbg(xhci, "Finished xhci_run for USB2 roothub\n"); - return 0; - } -@@ -1002,7 +1044,6 @@ int xhci_resume(struct xhci_hcd *xhci, b - - /* If restore operation fails, re-initialize the HC during resume */ - if ((temp & STS_SRE) || hibernated) { -- - if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) && - !(xhci_all_ports_seen_u0(xhci))) { - del_timer_sync(&xhci->comp_mode_recovery_timer); -@@ -1586,6 +1627,13 @@ int xhci_drop_endpoint(struct usb_hcd *h - u32 drop_flag; - u32 new_add_flags, new_drop_flags, new_slot_info; - int ret; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+#if MTK_SCH_NEW -+ struct sch_ep *sch_ep = NULL; -+ int isTT; -+ int ep_type; -+#endif -+#endif - - ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); - if (ret <= 0) -@@ -1637,6 +1685,40 @@ int xhci_drop_endpoint(struct usb_hcd *h - - xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep); - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+#if MTK_SCH_NEW -+ slot_ctx = xhci_get_slot_ctx(xhci, xhci->devs[udev->slot_id]->out_ctx); -+ if ((slot_ctx->tt_info & 0xff) > 0) { -+ isTT = 1; -+ } -+ else { -+ isTT = 0; -+ } -+ if (usb_endpoint_xfer_int(&ep->desc)) { -+ ep_type = USB_EP_INT; -+ } -+ else if (usb_endpoint_xfer_isoc(&ep->desc)) { -+ ep_type = USB_EP_ISOC; -+ } -+ else if (usb_endpoint_xfer_bulk(&ep->desc)) { -+ ep_type = USB_EP_BULK; -+ } -+ else -+ ep_type = USB_EP_CONTROL; -+ -+ sch_ep = mtk_xhci_scheduler_remove_ep(udev->speed, usb_endpoint_dir_in(&ep->desc) -+ , isTT, ep_type, (mtk_u32 *)ep); -+ if (sch_ep != NULL) { -+ kfree(sch_ep); -+ } -+ else { -+ xhci_dbg(xhci, "[MTK]Doesn't find ep_sch instance when removing endpoint\n"); -+ } -+#else -+ mtk_xhci_scheduler_remove_ep(xhci, udev, ep); -+#endif -+#endif -+ - xhci_dbg(xhci, "drop ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n", - (unsigned int) ep->desc.bEndpointAddress, - udev->slot_id, -@@ -1672,6 +1754,18 @@ int xhci_add_endpoint(struct usb_hcd *hc - u32 new_add_flags, new_drop_flags, new_slot_info; - struct xhci_virt_device *virt_dev; - int ret = 0; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ struct xhci_ep_ctx *in_ep_ctx; -+#if MTK_SCH_NEW -+ struct sch_ep *sch_ep; -+ int isTT; -+ int ep_type; -+ int maxp = 0; -+ int burst = 0; -+ int mult = 0; -+ int interval; -+#endif -+#endif - - ret = xhci_check_args(hcd, udev, ep, 1, true, __func__); - if (ret <= 0) { -@@ -1734,6 +1828,56 @@ int xhci_add_endpoint(struct usb_hcd *hc - return -ENOMEM; - } - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ in_ep_ctx = xhci_get_ep_ctx(xhci, in_ctx, ep_index); -+#if MTK_SCH_NEW -+ slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx); -+ if ((slot_ctx->tt_info & 0xff) > 0) { -+ isTT = 1; -+ } -+ else { -+ isTT = 0; -+ } -+ if (usb_endpoint_xfer_int(&ep->desc)) { -+ ep_type = USB_EP_INT; -+ } -+ else if (usb_endpoint_xfer_isoc(&ep->desc)) { -+ ep_type = USB_EP_ISOC; -+ } -+ else if (usb_endpoint_xfer_bulk(&ep->desc)) { -+ ep_type = USB_EP_BULK; -+ } -+ else -+ ep_type = USB_EP_CONTROL; -+ -+ if (udev->speed == USB_SPEED_FULL || udev->speed == USB_SPEED_HIGH -+ || udev->speed == USB_SPEED_LOW) { -+ maxp = ep->desc.wMaxPacketSize & 0x7FF; -+ burst = ep->desc.wMaxPacketSize >> 11; -+ mult = 0; -+ } -+ else if (udev->speed == USB_SPEED_SUPER) { -+ maxp = ep->desc.wMaxPacketSize & 0x7FF; -+ burst = ep->ss_ep_comp.bMaxBurst; -+ mult = ep->ss_ep_comp.bmAttributes & 0x3; -+ } -+ interval = (1 << ((in_ep_ctx->ep_info >> 16) & 0xff)); -+ sch_ep = kmalloc(sizeof(struct sch_ep), GFP_KERNEL); -+ if (mtk_xhci_scheduler_add_ep(udev->speed, usb_endpoint_dir_in(&ep->desc), -+ isTT, ep_type, maxp, interval, burst, mult, (mtk_u32 *)ep -+ , (mtk_u32 *)in_ep_ctx, sch_ep) != SCH_SUCCESS) { -+ xhci_err(xhci, "[MTK] not enough bandwidth\n"); -+ -+ return -ENOSPC; -+ } -+#else -+ if (mtk_xhci_scheduler_add_ep(xhci, udev, ep, in_ep_ctx) != SCH_SUCCESS) { -+ xhci_err(xhci, "[MTK] not enough bandwidth\n"); -+ -+ return -ENOSPC; -+ } -+#endif -+#endif - ctrl_ctx->add_flags |= cpu_to_le32(added_ctxs); - new_add_flags = le32_to_cpu(ctrl_ctx->add_flags); - -@@ -2697,7 +2841,7 @@ int xhci_check_bandwidth(struct usb_hcd - if (ctrl_ctx->add_flags == cpu_to_le32(SLOT_FLAG) && - ctrl_ctx->drop_flags == 0) - return 0; -- -+ - xhci_dbg(xhci, "New Input Control Context:\n"); - slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx); - xhci_dbg_ctx(xhci, virt_dev->in_ctx, -@@ -4233,10 +4377,14 @@ static u16 xhci_call_host_update_timeout - u16 *timeout) - { - if (state == USB3_LPM_U1) { -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (xhci->quirks & XHCI_INTEL_HOST) -+#endif - return xhci_calculate_intel_u1_timeout(udev, desc); - } else { -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (xhci->quirks & XHCI_INTEL_HOST) -+#endif - return xhci_calculate_intel_u2_timeout(udev, desc); - } - -@@ -4662,7 +4810,9 @@ int xhci_gen_setup(struct usb_hcd *hcd, - /* Accept arbitrarily long scatter-gather lists */ - hcd->self.sg_tablesize = ~0; - /* XHCI controllers don't stop the ep queue on short packets :| */ -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - hcd->self.no_stop_on_short = 1; -+#endif - - if (usb_hcd_is_primary_hcd(hcd)) { - xhci = kzalloc(sizeof(struct xhci_hcd), GFP_KERNEL); -@@ -4731,6 +4881,10 @@ int xhci_gen_setup(struct usb_hcd *hcd, - goto error; - xhci_dbg(xhci, "Reset complete\n"); - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ setInitialReg(); -+#endif -+ - temp = xhci_readl(xhci, &xhci->cap_regs->hcc_params); - if (HCC_64BIT_ADDR(temp)) { - xhci_dbg(xhci, "Enabling 64-bit DMA addresses.\n"); -@@ -4755,8 +4909,21 @@ MODULE_DESCRIPTION(DRIVER_DESC); - MODULE_AUTHOR(DRIVER_AUTHOR); - MODULE_LICENSE("GPL"); - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+static struct platform_device xhci_platform_dev = { -+ .name = "xhci-hcd", -+ .id = -1, -+ .dev = { -+ .coherent_dma_mask = 0xffffffff, -+ }, -+}; -+#endif -+ - static int __init xhci_hcd_init(void) - { -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ struct platform_device *pPlatformDev; -+#endif - int retval; - - retval = xhci_register_pci(); -@@ -4769,6 +4936,33 @@ static int __init xhci_hcd_init(void) - printk(KERN_DEBUG "Problem registering platform driver."); - goto unreg_pci; - } -+ -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ retval = register_chrdev(XHCI_MTK_TEST_MAJOR, DEVICE_NAME, &xhci_mtk_test_fops); -+ -+ u3phy_init(); -+ if (u3phy_ops->u2_slew_rate_calibration) { -+ u3phy_ops->u2_slew_rate_calibration(u3phy); -+ u3phy_ops->u2_slew_rate_calibration(u3phy_p1); -+ } -+ else{ -+ printk(KERN_ERR "WARN: PHY doesn't implement u2 slew rate calibration function\n"); -+ } -+ u3phy_ops->init(u3phy); -+ reinitIP(); -+ -+ pPlatformDev = &xhci_platform_dev; -+ memset(pPlatformDev, 0, sizeof(struct platform_device)); -+ pPlatformDev->name = "xhci-hcd"; -+ pPlatformDev->id = -1; -+ pPlatformDev->dev.coherent_dma_mask = 0xffffffff; -+ pPlatformDev->dev.dma_mask = &pPlatformDev->dev.coherent_dma_mask; -+ -+ retval = platform_device_register(&xhci_platform_dev); -+ if (retval < 0) -+ xhci_unregister_plat(); -+#endif -+ - /* - * Check the compiler generated sizes of structures that must be laid - * out in specific ways for hardware access. -@@ -4786,6 +4980,7 @@ static int __init xhci_hcd_init(void) - BUILD_BUG_ON(sizeof(struct xhci_intr_reg) != 8*32/8); - /* xhci_run_regs has eight fields and embeds 128 xhci_intr_regs */ - BUILD_BUG_ON(sizeof(struct xhci_run_regs) != (8+8*128)*32/8); -+ - return 0; - unreg_pci: - xhci_unregister_pci(); ---- a/drivers/usb/host/xhci-dbg.c -+++ b/drivers/usb/host/xhci-dbg.c -@@ -21,6 +21,9 @@ - */ - - #include "xhci.h" -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+#include "xhci-mtk.h" -+#endif - - #define XHCI_INIT_VALUE 0x0 - ---- a/drivers/usb/host/xhci.h -+++ b/drivers/usb/host/xhci.h -@@ -29,9 +29,24 @@ - #include <linux/usb/hcd.h> - - /* Code sharing between pci-quirks and xhci hcd */ --#include "xhci-ext-caps.h" -+#include "xhci-ext-caps.h" - #include "pci-quirks.h" - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+#define XHC_IRQ (22 + 8) -+#define XHC_IO_START 0x1E1C0000 -+#define XHC_IO_LENGTH 0x10000 -+/* mtk scheduler bitmasks */ -+#define BPKTS(p) ((p) & 0x3f) -+#define BCSCOUNT(p) (((p) & 0x7) << 8) -+#define BBM(p) ((p) << 11) -+#define BOFFSET(p) ((p) & 0x3fff) -+#define BREPEAT(p) (((p) & 0x7fff) << 16) -+#endif -+ -+ -+ -+ - /* xHCI PCI Configuration Registers */ - #define XHCI_SBRN_OFFSET (0x60) - -@@ -1536,8 +1551,12 @@ struct xhci_hcd { - /* Compliance Mode Recovery Data */ - struct timer_list comp_mode_recovery_timer; - u32 port_status_u0; -+#ifdef CONFIG_USB_MT7621_XHCI_PLATFORM -+#define COMP_MODE_RCVRY_MSECS 5000 -+#else - /* Compliance Mode Timer Triggered every 2 seconds */ - #define COMP_MODE_RCVRY_MSECS 2000 -+#endif - }; - - /* convert between an HCD pointer and the corresponding EHCI_HCD */ -@@ -1703,7 +1722,7 @@ void xhci_urb_free_priv(struct xhci_hcd - void xhci_free_command(struct xhci_hcd *xhci, - struct xhci_command *command); - --#ifdef CONFIG_PCI -+#if defined (CONFIG_PCI) && !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - /* xHCI PCI glue */ - int xhci_register_pci(void); - void xhci_unregister_pci(void); ---- a/drivers/usb/host/xhci-mem.c -+++ b/drivers/usb/host/xhci-mem.c -@@ -65,6 +65,9 @@ static struct xhci_segment *xhci_segment - - static void xhci_segment_free(struct xhci_hcd *xhci, struct xhci_segment *seg) - { -+ if (!seg) -+ return; -+ - if (seg->trbs) { - dma_pool_free(xhci->segment_pool, seg->trbs, seg->dma); - seg->trbs = NULL; -@@ -1446,9 +1449,17 @@ int xhci_endpoint_init(struct xhci_hcd * - max_burst = (usb_endpoint_maxp(&ep->desc) - & 0x1800) >> 11; - } -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) -+ max_packet += 2; -+#endif - break; - case USB_SPEED_FULL: - case USB_SPEED_LOW: -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ if ((max_packet % 4 == 2) && (max_packet % 16 != 14) && (max_burst == 0) && usb_endpoint_dir_in(&ep->desc)) -+ max_packet += 2; -+#endif - break; - default: - BUG(); ---- a/drivers/usb/host/xhci-plat.c -+++ b/drivers/usb/host/xhci-plat.c -@@ -25,6 +25,13 @@ static void xhci_plat_quirks(struct devi - * dev struct in order to setup MSI - */ - xhci->quirks |= XHCI_PLAT; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ /* MTK host controller gives a spurious successful event after a -+ * short transfer. Ignore it. -+ */ -+ xhci->quirks |= XHCI_SPURIOUS_SUCCESS; -+ xhci->quirks |= XHCI_LPM_SUPPORT; -+#endif - } - - /* called during probe() after chip reset completes */ -@@ -96,20 +103,32 @@ static int xhci_plat_probe(struct platfo - - driver = &xhci_plat_xhci_driver; - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ irq = XHC_IRQ; -+#else - irq = platform_get_irq(pdev, 0); -+#endif -+ - if (irq < 0) - return -ENODEV; - -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; -+#endif - - hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev)); - if (!hcd) - return -ENOMEM; - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ hcd->rsrc_start = (uint32_t)XHC_IO_START; -+ hcd->rsrc_len = XHC_IO_LENGTH; -+#else - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); -+#endif - - if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, - driver->description)) { ---- a/drivers/usb/host/xhci-ring.c -+++ b/drivers/usb/host/xhci-ring.c -@@ -236,7 +236,6 @@ static void inc_enq(struct xhci_hcd *xhc - */ - if (!chain && !more_trbs_coming) - break; -- - /* If we're not dealing with 0.95 hardware or - * isoc rings on AMD 0.96 host, - * carry over the chain bit of the previous TRB -@@ -273,16 +272,20 @@ static void inc_enq(struct xhci_hcd *xhc - static inline int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring, - unsigned int num_trbs) - { -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - int num_trbs_in_deq_seg; -+#endif - - if (ring->num_trbs_free < num_trbs) - return 0; - -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (ring->type != TYPE_COMMAND && ring->type != TYPE_EVENT) { - num_trbs_in_deq_seg = ring->dequeue - ring->deq_seg->trbs; - if (ring->num_trbs_free < num_trbs + num_trbs_in_deq_seg) - return 0; - } -+#endif - - return 1; - } -@@ -2910,6 +2913,7 @@ static int prepare_ring(struct xhci_hcd - next = ring->enqueue; - - while (last_trb(xhci, ring, ring->enq_seg, next)) { -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - /* If we're not dealing with 0.95 hardware or isoc rings - * on AMD 0.96 host, clear the chain bit. - */ -@@ -2919,7 +2923,9 @@ static int prepare_ring(struct xhci_hcd - next->link.control &= cpu_to_le32(~TRB_CHAIN); - else - next->link.control |= cpu_to_le32(TRB_CHAIN); -- -+#else -+ next->link.control &= cpu_to_le32(~TRB_CHAIN); -+#endif - wmb(); - next->link.control ^= cpu_to_le32(TRB_CYCLE); - -@@ -3049,6 +3055,9 @@ static void giveback_first_trb(struct xh - start_trb->field[3] |= cpu_to_le32(start_cycle); - else - start_trb->field[3] &= cpu_to_le32(~TRB_CYCLE); -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ wmb(); -+#endif - xhci_ring_ep_doorbell(xhci, slot_id, ep_index, stream_id); - } - -@@ -3108,6 +3117,29 @@ static u32 xhci_td_remainder(unsigned in - return (remainder >> 10) << 17; - } - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+static u32 mtk_xhci_td_remainder(unsigned int td_transfer_size, unsigned int td_running_total, unsigned int maxp, unsigned trb_buffer_length) -+{ -+ u32 max = 31; -+ int remainder, td_packet_count, packet_transferred; -+ -+ //0 for the last TRB -+ //FIXME: need to workaround if there is ZLP in this TD -+ if (td_running_total + trb_buffer_length == td_transfer_size) -+ return 0; -+ -+ //FIXME: need to take care of high-bandwidth (MAX_ESIT) -+ packet_transferred = (td_running_total /*+ trb_buffer_length*/) / maxp; -+ td_packet_count = DIV_ROUND_UP(td_transfer_size, maxp); -+ remainder = td_packet_count - packet_transferred; -+ -+ if (remainder > max) -+ return max << 17; -+ else -+ return remainder << 17; -+} -+#endif -+ - /* - * For xHCI 1.0 host controllers, TD size is the number of max packet sized - * packets remaining in the TD (*not* including this TRB). -@@ -3245,6 +3277,7 @@ static int queue_bulk_sg_tx(struct xhci_ - } - - /* Set the TRB length, TD size, and interrupter fields. */ -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (xhci->hci_version < 0x100) { - remainder = xhci_td_remainder( - urb->transfer_buffer_length - -@@ -3254,6 +3287,13 @@ static int queue_bulk_sg_tx(struct xhci_ - trb_buff_len, total_packet_count, urb, - num_trbs - 1); - } -+#else -+ if (num_trbs > 1) -+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, -+ running_total, urb->ep->desc.wMaxPacketSize, trb_buff_len); -+#endif -+ -+ - length_field = TRB_LEN(trb_buff_len) | - remainder | - TRB_INTR_TARGET(0); -@@ -3316,6 +3356,9 @@ int xhci_queue_bulk_tx(struct xhci_hcd * - int running_total, trb_buff_len, ret; - unsigned int total_packet_count; - u64 addr; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ int max_packet; -+#endif - - if (urb->num_sgs) - return queue_bulk_sg_tx(xhci, mem_flags, urb, slot_id, ep_index); -@@ -3341,6 +3384,25 @@ int xhci_queue_bulk_tx(struct xhci_hcd * - running_total += TRB_MAX_BUFF_SIZE; - } - /* FIXME: this doesn't deal with URB_ZERO_PACKET - need one more */ -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ switch(urb->dev->speed){ -+ case USB_SPEED_SUPER: -+ max_packet = urb->ep->desc.wMaxPacketSize; -+ break; -+ case USB_SPEED_HIGH: -+ case USB_SPEED_FULL: -+ case USB_SPEED_LOW: -+ case USB_SPEED_WIRELESS: -+ case USB_SPEED_UNKNOWN: -+ default: -+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; -+ break; -+ } -+ if((urb->transfer_flags & URB_ZERO_PACKET) -+ && ((urb->transfer_buffer_length % max_packet) == 0)){ -+ num_trbs++; -+ } -+#endif - - ret = prepare_transfer(xhci, xhci->devs[slot_id], - ep_index, urb->stream_id, -@@ -3400,6 +3462,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd * - field |= TRB_ISP; - - /* Set the TRB length, TD size, and interrupter fields. */ -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (xhci->hci_version < 0x100) { - remainder = xhci_td_remainder( - urb->transfer_buffer_length - -@@ -3409,6 +3472,10 @@ int xhci_queue_bulk_tx(struct xhci_hcd * - trb_buff_len, total_packet_count, urb, - num_trbs - 1); - } -+#else -+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); -+#endif -+ - length_field = TRB_LEN(trb_buff_len) | - remainder | - TRB_INTR_TARGET(0); -@@ -3498,7 +3565,11 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * - field |= 0x1; - - /* xHCI 1.0 6.4.1.2.1: Transfer Type field */ -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ if (1) { -+#else - if (xhci->hci_version == 0x100) { -+#endif - if (urb->transfer_buffer_length > 0) { - if (setup->bRequestType & USB_DIR_IN) - field |= TRB_TX_TYPE(TRB_DATA_IN); -@@ -3522,7 +3593,12 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * - field = TRB_TYPE(TRB_DATA); - - length_field = TRB_LEN(urb->transfer_buffer_length) | -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - xhci_td_remainder(urb->transfer_buffer_length) | -+#else -+ //CC: MTK style, no scatter-gather for control transfer -+ 0 | -+#endif - TRB_INTR_TARGET(0); - if (urb->transfer_buffer_length > 0) { - if (setup->bRequestType & USB_DIR_IN) -@@ -3533,7 +3609,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd * - length_field, - field | ep_ring->cycle_state); - } -- -+ - /* Save the DMA address of the last TRB in the TD */ - td->last_trb = ep_ring->enqueue; - -@@ -3645,6 +3721,9 @@ static int xhci_queue_isoc_tx(struct xhc - u64 start_addr, addr; - int i, j; - bool more_trbs_coming; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ int max_packet; -+#endif - - ep_ring = xhci->devs[slot_id]->eps[ep_index].ring; - -@@ -3658,6 +3737,21 @@ static int xhci_queue_isoc_tx(struct xhc - start_trb = &ep_ring->enqueue->generic; - start_cycle = ep_ring->cycle_state; - -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ switch(urb->dev->speed){ -+ case USB_SPEED_SUPER: -+ max_packet = urb->ep->desc.wMaxPacketSize; -+ break; -+ case USB_SPEED_HIGH: -+ case USB_SPEED_FULL: -+ case USB_SPEED_LOW: -+ case USB_SPEED_WIRELESS: -+ case USB_SPEED_UNKNOWN: -+ max_packet = urb->ep->desc.wMaxPacketSize & 0x7ff; -+ break; -+ } -+#endif -+ - urb_priv = urb->hcpriv; - /* Queue the first TRB, even if it's zero-length */ - for (i = 0; i < num_tds; i++) { -@@ -3729,9 +3823,13 @@ static int xhci_queue_isoc_tx(struct xhc - } else { - td->last_trb = ep_ring->enqueue; - field |= TRB_IOC; -+#if defined (CONFIG_USB_MT7621_XHCI_PLATFORM) -+ if (!(xhci->quirks & XHCI_AVOID_BEI)) { -+#else - if (xhci->hci_version == 0x100 && - !(xhci->quirks & - XHCI_AVOID_BEI)) { -+#endif - /* Set BEI bit except for the last td */ - if (i < num_tds - 1) - field |= TRB_BEI; -@@ -3746,6 +3844,7 @@ static int xhci_queue_isoc_tx(struct xhc - trb_buff_len = td_remain_len; - - /* Set the TRB length, TD size, & interrupter fields. */ -+#if !defined (CONFIG_USB_MT7621_XHCI_PLATFORM) - if (xhci->hci_version < 0x100) { - remainder = xhci_td_remainder( - td_len - running_total); -@@ -3755,6 +3854,10 @@ static int xhci_queue_isoc_tx(struct xhc - total_packet_count, urb, - (trbs_per_td - j - 1)); - } -+#else -+ remainder = mtk_xhci_td_remainder(urb->transfer_buffer_length, running_total, max_packet, trb_buff_len); -+#endif -+ - length_field = TRB_LEN(trb_buff_len) | - remainder | - TRB_INTR_TARGET(0); diff --git a/target/linux/ramips/patches-3.10/800-eco.patch b/target/linux/ramips/patches-3.10/800-eco.patch deleted file mode 100644 index 08b2bb0ad9..0000000000 --- a/target/linux/ramips/patches-3.10/800-eco.patch +++ /dev/null @@ -1,12 +0,0 @@ ---- a/arch/mips/include/asm/mach-ralink/mt7620.h -+++ b/arch/mips/include/asm/mach-ralink/mt7620.h -@@ -101,4 +101,9 @@ - #define MT7620_GPIO_MODE_EPHY 15 - #define MT7620_GPIO_MODE_PA 20 - -+static inline int mt7620_get_eco(void) -+{ -+ return rt_sysc_r32(SYSC_REG_CHIP_REV) & CHIP_REV_ECO_MASK; -+} -+ - #endif diff --git a/target/linux/ramips/patches-3.10/999-clk.patch b/target/linux/ramips/patches-3.10/999-clk.patch deleted file mode 100644 index 22ac33aa54..0000000000 --- a/target/linux/ramips/patches-3.10/999-clk.patch +++ /dev/null @@ -1,17 +0,0 @@ -Index: linux-3.10.32/arch/mips/ralink/clk.c -=================================================================== ---- linux-3.10.32.orig/arch/mips/ralink/clk.c 2014-03-12 03:04:05.468396764 +0000 -+++ linux-3.10.32/arch/mips/ralink/clk.c 2014-03-12 03:29:00.220416177 +0000 -@@ -56,6 +56,12 @@ - } - EXPORT_SYMBOL_GPL(clk_get_rate); - -+int clk_set_rate(struct clk *clk, unsigned long rate) -+{ -+ return -1; -+} -+EXPORT_SYMBOL_GPL(clk_set_rate); -+ - void __init plat_time_init(void) - { - struct clk *clk; diff --git a/target/linux/ramips/patches-3.10/999-memory-detect.patch b/target/linux/ramips/patches-3.10/999-memory-detect.patch deleted file mode 100644 index 165a1f0ded..0000000000 --- a/target/linux/ramips/patches-3.10/999-memory-detect.patch +++ /dev/null @@ -1,32 +0,0 @@ ---- a/arch/mips/ralink/of.c -+++ b/arch/mips/ralink/of.c -@@ -80,6 +80,16 @@ void __init device_tree_init(void) - } - - extern struct boot_param_header __image_dtb; -+static int memory_dtb; -+ -+static int __init early_init_dt_find_memory(unsigned long node, const char *uname, -+ int depth, void *data) -+{ -+ if (depth == 1 && !strcmp(uname, "memory@0")) -+ memory_dtb = 1; -+ -+ return 0; -+} - - void __init plat_mem_setup(void) - { -@@ -90,8 +100,10 @@ void __init plat_mem_setup(void) - * parsed resulting in our memory appearing - */ - __dt_setup_arch(&__image_dtb); -- -- if (soc_info.mem_size) -+ of_scan_flat_dt(early_init_dt_find_memory, NULL); -+ if (memory_dtb) -+ of_scan_flat_dt(early_init_dt_scan_memory, NULL); -+ else if (soc_info.mem_size) - add_memory_region(soc_info.mem_base, soc_info.mem_size * SZ_1M, - BOOT_MEM_RAM); - else diff --git a/target/linux/ramips/patches-3.10/999-pinctrl_fixes.patch b/target/linux/ramips/patches-3.10/999-pinctrl_fixes.patch deleted file mode 100644 index d7ad676f09..0000000000 --- a/target/linux/ramips/patches-3.10/999-pinctrl_fixes.patch +++ /dev/null @@ -1,33 +0,0 @@ ---- a/drivers/pinctrl/pinctrl-rt2880.c -+++ b/drivers/pinctrl/pinctrl-rt2880.c -@@ -204,6 +204,7 @@ static int rt2880_pmx_group_enable(struc - { - struct rt2880_priv *p = pinctrl_dev_get_drvdata(pctrldev); - u32 mode = 0; -+ int i; - - /* dont allow double use */ - if (p->groups[group].enabled) { -@@ -217,16 +218,16 @@ static int rt2880_pmx_group_enable(struc - mode = rt_sysc_r32(SYSC_REG_GPIO_MODE); - mode &= ~(p->groups[group].mask << p->groups[group].shift); - -+ /* mark the pins as gpio */ -+ for (i = 0; i < p->groups[group].func[0].pin_count; i++) -+ p->gpio[p->groups[group].func[0].pins[i]] = 1; -+ - /* function 0 is gpio and needs special handling */ - if (func == 0) { -- int i; -- -- - mode |= p->groups[group].gpio << p->groups[group].shift; -- /* mark the pins as gpio */ -- for (i = 0; i < p->groups[group].func[0].pin_count; i++) -- p->gpio[p->groups[group].func[0].pins[i]] = 1; - } else { -+ for (i = 0; i < p->func[func]->pin_count; i++) -+ p->gpio[p->func[func]->pins[i]] = 0; - mode |= p->func[func]->value << p->groups[group].shift; - } - rt_sysc_w32(mode, SYSC_REG_GPIO_MODE); diff --git a/target/linux/ramips/patches-3.10/999-raeth_fixes.patch b/target/linux/ramips/patches-3.10/999-raeth_fixes.patch deleted file mode 100644 index 5e1bb4d2ec..0000000000 --- a/target/linux/ramips/patches-3.10/999-raeth_fixes.patch +++ /dev/null @@ -1,21 +0,0 @@ ---- a/drivers/net/ethernet/ralink/ralink_soc_eth.c -+++ b/drivers/net/ethernet/ralink/ralink_soc_eth.c -@@ -335,7 +335,7 @@ static int fe_start_xmit(struct sk_buff - if (priv->soc->tso) - fe_start_tso(skb, dev, nr_frags, tx); - -- if (skb_shinfo(skb)->gso_segs > 1) { -+ if (priv->soc->tso && (skb_shinfo(skb)->gso_segs > 1)) { - struct iphdr *iph = NULL; - struct tcphdr *th = NULL; - struct ipv6hdr *ip6h = NULL; -@@ -741,8 +741,7 @@ static int fe_probe(struct platform_devi - dev_info(&pdev->dev, "Enabling TSO\n"); - netdev->features |= NETIF_F_SG | NETIF_F_TSO | NETIF_F_TSO6 | NETIF_F_IPV6_CSUM; - } -- -- netdev->hw_features = netdev->vlan_features = netdev->features; -+ netdev->hw_features = netdev->features; - - netdev->irq = platform_get_irq(pdev, 0); - if (netdev->irq < 0) { diff --git a/target/linux/ramips/rt288x/config-3.10 b/target/linux/ramips/rt288x/config-3.10 index a3a12a9e7f..f1ae652ec6 100644 --- a/target/linux/ramips/rt288x/config-3.10 +++ b/target/linux/ramips/rt288x/config-3.10 @@ -1,6 +1,7 @@ CONFIG_ARCH_BINFMT_ELF_RANDOMIZE_PIE=y CONFIG_ARCH_DISCARD_MEMBLOCK=y CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y +CONFIG_ARCH_HAS_RESET_CONTROLLER=y CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y CONFIG_ARCH_HIBERNATION_POSSIBLE=y CONFIG_ARCH_REQUIRE_GPIOLIB=y @@ -82,6 +83,7 @@ CONFIG_IRQCHIP=y CONFIG_IRQ_CPU=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_FORCED_THREADING=y +CONFIG_IRQ_INTC=y CONFIG_IRQ_WORK=y CONFIG_M25PXX_USE_FAST_READ=y CONFIG_MDIO_BOARDINFO=y @@ -127,6 +129,7 @@ CONFIG_PINMUX=y # CONFIG_PREEMPT_RCU is not set CONFIG_RALINK=y CONFIG_RALINK_WDT=y +CONFIG_RA_NAT_NONE=y # CONFIG_RCU_STALL_COMMON is not set CONFIG_RESET_CONTROLLER=y # CONFIG_SCSI_DMA is not set @@ -136,6 +139,7 @@ CONFIG_SERIAL_OF_PLATFORM=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SOC_MT7620 is not set +# CONFIG_SOC_MT7621 is not set CONFIG_SOC_RT288X=y # CONFIG_SOC_RT305X is not set # CONFIG_SOC_RT3883 is not set |