diff options
Diffstat (limited to 'target/linux')
38 files changed, 3836 insertions, 3394 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds index f6ea9a8501..6936b8c873 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/01_leds +++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds @@ -127,6 +127,7 @@ cf-e316n-v2) ucidef_set_led_wlan "wlan" "WLAN" "$board:blue:wlan" "phy0tpt" ;; +cpe210|\ cpe510) ucidef_set_led_switch "lan0" "LAN0" "tp-link:green:lan0" "switch0" "0x20" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" @@ -322,7 +323,8 @@ mr600) ucidef_set_led_wlan "wlan58" "WLAN58" "mr600:green:wlan58" "phy0tpt" ;; -mr1750) +mr1750 | \ +mr1750v2) ucidef_set_led_netdev "lan" "LAN" "mr1750:blue:wan" "eth0" ucidef_set_led_wlan "wlan58" "WLAN58" "mr1750:blue:wlan58" "phy0tpt" ucidef_set_led_wlan "wlan24" "WLAN24" "mr1750:blue:wlan24" "phy1tpt" @@ -383,6 +385,7 @@ om2p | \ om2pv2 | \ om2p-hs | \ om2p-hsv2 | \ +om2p-hsv3 | \ om2p-lc) ucidef_set_led_netdev "port1" "port1" "om2p:blue:wan" "eth0" ucidef_set_led_netdev "port2" "port2" "om2p:blue:lan" "eth1" @@ -423,6 +426,14 @@ smart-300) ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt" ;; +som9331) + ucidef_set_led_netdev "wan" "WAN" "som9331:orange:wan" "eth1" + ucidef_set_led_switch "lan1" "LAN1" "som9331:orange:lan1" "switch0" "0x08" + ucidef_set_led_switch "lan2" "LAN2" "som9331:orange:lan2" "switch0" "0x02" + ucidef_set_led_wlan "wlan" "WLAN" "som9331:red:wlan" "phy0tpt" + ucidef_set_led_usbdev "usb" "USB" "som9331:green:system" "1-1" + ;; + tellstick-znet-lite) ucidef_set_led_netdev "lan_act" "LANACT" "tellstick:green:lan" "eth0" "tx rx" ucidef_set_led_netdev "lan_link" "LANLINK" "tellstick:orange:lan" "eth0" "link" @@ -607,7 +618,8 @@ tl-wa830re-v2) ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; -tl-wr841n-v9) +tl-wr841n-v9 | \ +tl-wr841n-v11) ucidef_set_led_netdev "wan" "WAN" "tp-link:green:wan" "eth1" ucidef_set_led_switch "lan1" "LAN1" "tp-link:green:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "tp-link:green:lan2" "switch0" "0x08" diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network index e7da0653e2..1ed593cc55 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/02_network +++ b/target/linux/ar71xx/base-files/etc/board.d/02_network @@ -72,6 +72,7 @@ bsb) ucidef_set_interface_wlan ;; +cpe210|\ cpe510) ucidef_add_switch "switch0" \ "0@eth0" "5:lan" "4:wan" @@ -200,7 +201,7 @@ tellstick-znet-lite) tl-wdr4300|\ tl-wr1041n-v2) ucidef_add_switch "switch0" \ - "0@eth0" "1:wan" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" + "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan" ;; tl-wr1043nd) @@ -335,6 +336,7 @@ eap7660d |\ el-mini |\ loco-m-xw |\ mr1750 |\ +mr1750v2 |\ mr18 |\ mr600 |\ mr600v2 |\ @@ -398,7 +400,8 @@ routerstation|\ tl-wr710n |\ tl-wr720n-v3|\ tl-wr810n |\ -wpe72) +wpe72 |\ +wrtnode2q) ucidef_set_interfaces_lan_wan "eth1" "eth0" ;; @@ -449,6 +452,7 @@ oolite |\ qihoo-c301 |\ rb-750 |\ rb-751 |\ +som9331 |\ tew-632brp |\ tew-712br |\ tew-732br |\ @@ -461,6 +465,7 @@ tl-wr741nd |\ tl-wr741nd-v4 |\ tl-wr841n-v7 |\ tl-wr841n-v9 |\ +tl-wr841n-v11 |\ tl-wr842n-v3 |\ whr-g301n |\ whr-hp-g300n |\ diff --git a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches index 8abcfc0db0..5b95f155cf 100755 --- a/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches +++ b/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches @@ -17,9 +17,14 @@ nanostation-m) nanostation-m-xw) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2" ;; +cpe210|\ cpe510) ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20" ;; +rb-912uag-2hpnd|\ +rb-912uag-5hpnd) + ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" + ;; esac board_config_flush diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index 5e6d305593..520fef8097 100644 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -176,7 +176,8 @@ get_status_led() { mr600v2) status_led="mr600:blue:power" ;; - mr1750) + mr1750 | \ + mr1750v2) status_led="mr1750:blue:power" ;; mr900 | \ @@ -207,6 +208,7 @@ get_status_led() { om2pv2 | \ om2p-hs | \ om2p-hsv2 | \ + om2p-hsv3 | \ om2p-lc) status_led="om2p:blue:power" ;; @@ -276,6 +278,9 @@ get_status_led() { tellstick-znet-lite) status_led="tellstick:white:system" ;; + som9331) + status_led="som9331:green:system" + ;; tew-632brp) status_led="tew-632brp:green:status" ;; @@ -319,6 +324,7 @@ get_status_led() { tl-wr841n-v1 | \ tl-wr841n-v7 | \ tl-wr841n-v8 | \ + tl-wr841n-v11 | \ tl-wa830re-v2 | \ tl-wr842n-v2 | \ tl-wr842n-v3 | \ diff --git a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index d925a852d6..0e93feb19c 100644 --- a/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -72,6 +72,7 @@ case "$FIRMWARE" in ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +1) ;; mr1750 | \ + mr1750v2 | \ om5p-acv2) ath10kcal_extract "ART" 20480 2116 ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16) diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index eb87dd4ecb..5b81f739f4 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -446,7 +446,11 @@ ar71xx_board_detect() { *"COMFAST CF-E316N v2") name="cf-e316n-v2" ;; - *"CPE210/220/510/520") + *"CPE210/220") + name="cpe210" + tplink_pharos_board_detect + ;; + *"CPE510/520") name="cpe510" tplink_pharos_board_detect ;; @@ -595,6 +599,9 @@ ar71xx_board_detect() { *MR1750) name="mr1750" ;; + *MR1750v2) + name="mr1750v2" + ;; *MR600) name="mr600" ;; @@ -640,6 +647,9 @@ ar71xx_board_detect() { *"OM2P HSv2") name="om2p-hsv2" ;; + *"OM2P HSv3") + name="om2p-hsv3" + ;; *"OM2P LC") name="om2p-lc" ;; @@ -784,6 +794,9 @@ ar71xx_board_detect() { *"Telldus TellStick ZNet Lite") name="tellstick-znet-lite" ;; + *SOM9331) + name="som9331" + ;; *TEW-632BRP) name="tew-632brp" ;; @@ -907,6 +920,9 @@ ar71xx_board_detect() { *"TL-WR841N/ND v9") name="tl-wr841n-v9" ;; + *"TL-WR841N/ND v11") + name="tl-wr841n-v11" + ;; *"TL-WR842N/ND v2") name="tl-wr842n-v2" ;; @@ -1039,6 +1055,9 @@ ar71xx_board_detect() { *WRT400N) name="wrt400n" ;; + *"WRTnode2Q board") + name="wrtnode2q" + ;; *"WZR-450HP2") name="wzr-450hp2" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh index 209cdaaf90..87b65165b4 100644 --- a/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/openmesh.sh @@ -36,62 +36,48 @@ platform_add_ramfs_ubootenv() } append sysupgrade_pre_upgrade platform_add_ramfs_ubootenv -platform_check_image_openmesh() +platform_check_image_target_openmesh() { - local img_magic=$1 - local img_path=$2 - local fw_printenv=/usr/sbin/fw_printenv - local img_board_target= img_num_files= i=0 - local cfg_name= kernel_name= rootfs_name= - - case "$img_magic" in - # Combined Extended Image v1 - 43453031) - img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) - img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null)) - ;; - *) - echo "Invalid image ($img_magic). Use combined extended images on this platform" - return 1 - ;; - esac + img_board_target="$1" case "$img_board_target" in OM2P) - [ "$board" = "om2p" ] && break - [ "$board" = "om2pv2" ] && break - [ "$board" = "om2p-lc" ] && break - [ "$board" = "om2p-hs" ] && break - [ "$board" = "om2p-hsv2" ] && break + [ "$board" = "om2p" ] && return 0 + [ "$board" = "om2pv2" ] && return 0 + [ "$board" = "om2p-lc" ] && return 0 + [ "$board" = "om2p-hs" ] && return 0 + [ "$board" = "om2p-hsv2" ] && return 0 + [ "$board" = "om2p-hsv3" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; OM5P) - [ "$board" = "om5p" ] && break - [ "$board" = "om5p-an" ] && break + [ "$board" = "om5p" ] && return 0 + [ "$board" = "om5p-an" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; OM5PAC) - [ "$board" = "om5p-ac" ] && break - [ "$board" = "om5p-acv2" ] && break + [ "$board" = "om5p-ac" ] && return 0 + [ "$board" = "om5p-acv2" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; MR1750) - [ "$board" = "mr1750" ] && break + [ "$board" = "mr1750" ] && return 0 + [ "$board" = "mr1750v2" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; MR600) - [ "$board" = "mr600" ] && break - [ "$board" = "mr600v2" ] && break + [ "$board" = "mr600" ] && return 0 + [ "$board" = "mr600v2" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; MR900) - [ "$board" = "mr900" ] && break - [ "$board" = "mr900v2" ] && break + [ "$board" = "mr900" ] && return 0 + [ "$board" = "mr900v2" ] && return 0 echo "Invalid image board target ($img_board_target) for this platform: $board. Use the correct image for this platform" return 1 ;; @@ -100,8 +86,31 @@ platform_check_image_openmesh() return 1 ;; esac +} + +platform_check_image_openmesh() +{ + local img_magic=$1 + local img_path=$2 + local fw_printenv=/usr/sbin/fw_printenv + local img_board_target= img_num_files= i=0 + local cfg_name= kernel_name= rootfs_name= + + case "$img_magic" in + # Combined Extended Image v1 + 43453031) + img_board_target=$(trim $(dd if="$img_path" bs=4 skip=1 count=8 2>/dev/null)) + img_num_files=$(trim $(dd if="$img_path" bs=2 skip=18 count=1 2>/dev/null)) + ;; + *) + echo "Invalid image ($img_magic). Use combined extended images on this platform" + return 1 + ;; + esac + + platform_check_image_target_openmesh "$img_board_target" || return 1 - [ $img_num_files -ne 3 ] && { + [ $img_num_files -lt 3 ] && { echo "Invalid number of embedded images ($img_num_files). Use the correct image for this platform" return 1 } diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index 0d6aa6b67e..313e2e639b 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -272,7 +272,8 @@ platform_check_image() { unifiac-pro | \ unifi-outdoor | \ carambola2 | \ - weio ) + weio | \ + wrtnode2q) [ "$magic" != "2705" ] && { echo "Invalid image type." return 1 @@ -280,6 +281,7 @@ platform_check_image() { return 0 ;; + cpe210|\ cpe510) tplink_pharos_check_image "$1" && return 0 return 1 @@ -314,6 +316,7 @@ platform_check_image() { return 0; ;; mr1750 | \ + mr1750v2 | \ mr600 | \ mr600v2 | \ mr900 | \ @@ -322,6 +325,7 @@ platform_check_image() { om2pv2 | \ om2p-hs | \ om2p-hsv2 | \ + om2p-hsv3 | \ om2p-lc | \ om5p | \ om5p-an | \ @@ -346,6 +350,7 @@ platform_check_image() { onion-omega | \ oolite | \ smart-300 | \ + som9331 | \ tellstick-znet-lite | \ tl-mr10u | \ tl-mr11u | \ @@ -385,6 +390,7 @@ platform_check_image() { tl-wr841n-v7 | \ tl-wr841n-v8 | \ tl-wr841n-v9 | \ + tl-wr841n-v11 | \ tl-wr842n-v2 | \ tl-wr842n-v3 | \ tl-wr941nd | \ @@ -573,6 +579,7 @@ platform_do_upgrade() { platform_do_upgrade_dir825b "$ARGV" ;; mr1750 | \ + mr1750v2 | \ mr600 | \ mr600v2 | \ mr900 | \ @@ -581,6 +588,7 @@ platform_do_upgrade() { om2pv2 | \ om2p-hs | \ om2p-hsv2 | \ + om2p-hsv3 | \ om2p-lc | \ om5p | \ om5p-an | \ diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4 index 57ac5d825f..79d703b3db 100644 --- a/target/linux/ar71xx/config-4.4 +++ b/target/linux/ar71xx/config-4.4 @@ -131,6 +131,7 @@ CONFIG_ATH79_MACH_R6100=y # CONFIG_ATH79_MACH_RBSXTLITE is not set CONFIG_ATH79_MACH_RW2458N=y CONFIG_ATH79_MACH_SMART_300=y +CONFIG_ATH79_MACH_SOM9331=y CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE=y CONFIG_ATH79_MACH_TEW_632BRP=y CONFIG_ATH79_MACH_TEW_673GRU=y @@ -190,6 +191,7 @@ CONFIG_ATH79_MACH_WPJ531=y CONFIG_ATH79_MACH_WPJ558=y CONFIG_ATH79_MACH_WRT160NL=y CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WRTNODE2Q=y CONFIG_ATH79_MACH_WZR_450HP2=y CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt index ac2cdaec3c..52b9b5527e 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt +++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt @@ -249,6 +249,16 @@ config ATH79_MACH_ESR1750 select ATH79_DEV_USB select ATH79_DEV_WMAC +config ATH79_MACH_SOM9331 + bool "SOM9331 support" + select SOC_AR933X + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + select ATH79_DEV_WMAC + config ATH79_MACH_WHR_HP_G300N bool "Buffalo WHR-HP-G300N board support" select SOC_AR724X @@ -680,6 +690,16 @@ config ATH79_MACH_WRT400N select ATH79_DEV_LEDS_GPIO select ATH79_DEV_M25P80 +config ATH79_MACH_WRTNODE2Q + bool "WRTnode2Q board support" + select SOC_QCA953X + select ATH79_DEV_AP9X_PCI if PCI + select ATH79_DEV_ETH + select ATH79_DEV_GPIO_BUTTONS + select ATH79_DEV_LEDS_GPIO + select ATH79_DEV_M25P80 + select ATH79_DEV_WMAC + config ATH79_MACH_R6100 bool "NETGEAR R6100 board support" select SOC_AR934X diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile index 6144e29157..f8b0b2bb5a 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile @@ -135,6 +135,7 @@ obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o +obj-$(CONFIG_ATH79_MACH_SOM9331) += mach-som9331.o obj-$(CONFIG_ATH79_MACH_TELLSTICK_ZNET_LITE) += mach-tellstick-znet-lite.o obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o @@ -194,6 +195,7 @@ obj-$(CONFIG_ATH79_MACH_WPJ531) += mach-wpj531.o obj-$(CONFIG_ATH79_MACH_WPJ558) += mach-wpj558.o obj-$(CONFIG_ATH79_MACH_WRT160NL) += mach-wrt160nl.o obj-$(CONFIG_ATH79_MACH_WRT400N) += mach-wrt400n.o +obj-$(CONFIG_ATH79_MACH_WRTNODE2Q) += mach-wrtnode2q.o obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) += mach-wzr-hp-g300nh.o obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c index 5cb052a84a..875589dde8 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-cpe510.c @@ -78,12 +78,8 @@ static struct gpio_keys_button cpe510_gpio_keys[] __initdata = { } }; - -static void __init cpe510_setup(void) +static void __init cpe_setup(u8 *mac) { - u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); - u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); - /* Disable JTAG, enabling GPIOs 0-3 */ /* Configure OBS4 line, for GPIO 4*/ ath79_gpio_function_setup(AR934X_GPIO_FUNC_JTAG_DISABLE, @@ -105,9 +101,31 @@ static void __init cpe510_setup(void) ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0); ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; ath79_register_eth(1); +} + + +static void __init cpe210_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + cpe_setup(mac); + + ath79_register_wmac(ee, mac); +} + +static void __init cpe510_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f830008); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff5000); + + cpe_setup(mac); ath79_register_wmac(ee, mac); } -MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE210/220/510/520", +MIPS_MACHINE(ATH79_MACH_CPE210, "CPE210", "TP-LINK CPE210/220", + cpe210_setup); + +MIPS_MACHINE(ATH79_MACH_CPE510, "CPE510", "TP-LINK CPE510/520", cpe510_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c index e3c04e7756..18101ce8e4 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-mr1750.c @@ -168,3 +168,4 @@ static void __init mr1750_setup(void) } MIPS_MACHINE(ATH79_MACH_MR1750, "MR1750", "OpenMesh MR1750", mr1750_setup); +MIPS_MACHINE(ATH79_MACH_MR1750V2, "MR1750v2", "OpenMesh MR1750v2", mr1750_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c index 6b0bdc3dcd..3b282a36ea 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-om2p.c @@ -223,3 +223,4 @@ static void __init om2p_hs_setup(void) MIPS_MACHINE(ATH79_MACH_OM2P_HS, "OM2P-HS", "OpenMesh OM2P HS", om2p_hs_setup); MIPS_MACHINE(ATH79_MACH_OM2P_HSv2, "OM2P-HSv2", "OpenMesh OM2P HSv2", om2p_hs_setup); +MIPS_MACHINE(ATH79_MACH_OM2P_HSv3, "OM2P-HSv3", "OpenMesh OM2P HSv3", om2p_hs_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c new file mode 100644 index 0000000000..eef5bcedc2 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-som9331.c @@ -0,0 +1,125 @@ +/* + * OpenEmbed SOM9331 board support + * + * Copyright (C) 2011 dongyuqi <729650915@qq.com> + * Copyright (C) 2011-2012 Gabor Juhos <juhosg@openwrt.org> + * + * 5/27/2016 - Modified by Allan Nick Pedrana <nik9993@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/gpio.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define SOM9331_GPIO_LED_WLAN 27 +#define SOM9331_GPIO_LED_SYSTEM 0 +#define SOM9331_GPIO_LED_2 13 +#define SOM9331_GPIO_LED_3 14 +#define SOM9331_GPIO_LED_5 16 +#define SOM9331_GPIO_LED_WAN SOM9331_GPIO_LED_2 +#define SOM9331_GPIO_LED_LAN1 SOM9331_GPIO_LED_3 +#define SOM9331_GPIO_LED_LAN2 SOM9331_GPIO_LED_5 +#define SOM9331_GPIO_BTN_RESET 11 + +#define SOM9331_KEYS_POLL_INTERVAL 20 /* msecs */ +#define SOM9331_KEYS_DEBOUNCE_INTERVAL (3 * SOM9331_KEYS_POLL_INTERVAL) + +static const char *som9331_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data som9331_flash_data = { + .part_probes = som9331_part_probes, +}; + +static struct gpio_led som9331_leds_gpio[] __initdata = { + { + .name = "som9331:red:wlan", + .gpio = SOM9331_GPIO_LED_WLAN, + .active_low = 1, + }, + { + .name = "som9331:orange:wan", + .gpio = SOM9331_GPIO_LED_WAN, + .active_low = 0, + }, + { + .name = "som9331:orange:lan1", + .gpio = SOM9331_GPIO_LED_LAN1, + .active_low = 0, + }, + { + .name = "som9331:orange:lan2", + .gpio = SOM9331_GPIO_LED_LAN2, + .active_low = 0, + }, + { + .name = "som9331:blue:system", + .gpio = SOM9331_GPIO_LED_SYSTEM, + .active_low = 0, + }, +}; + +static struct gpio_keys_button som9331_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = SOM9331_KEYS_DEBOUNCE_INTERVAL, + .gpio = SOM9331_GPIO_BTN_RESET, + .active_low = 0, + } +}; + +static void __init som9331_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_setup_ar933x_phy4_switch(true, true); + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + ath79_register_m25p80(&som9331_flash_data); + ath79_register_leds_gpio(-1, ARRAY_SIZE(som9331_leds_gpio), + som9331_leds_gpio); + ath79_register_gpio_keys_polled(-1, SOM9331_KEYS_POLL_INTERVAL, + ARRAY_SIZE(som9331_gpio_keys), + som9331_gpio_keys); + + ath79_register_usb(); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac, -1); + + ath79_register_mdio(0, 0x0); + + /* LAN ports */ + ath79_register_eth(1); + + /* WAN port */ + ath79_register_eth(0); + + ath79_register_wmac(ee, mac); +} + +MIPS_MACHINE(ATH79_MACH_SOM9331, "SOM9331", "OpenEmbed SOM9331", som9331_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c index 02096031db..f806568f98 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr841n-v9.c @@ -1,8 +1,9 @@ /* - * TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3 + * TP-LINK TL-WR841N/ND v9/v11 / TL-WR842N/ND v3 * * Copyright (C) 2014 Matthias Schiffer <mschiffer@universe-factory.net> * Copyright (C) 2016 Cezary Jackiewicz <cezary@eko.one.pl> + * Copyright (C) 2016 Stijn Segers <francesco.borromini@gmail.com> * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License version 2 as published @@ -35,6 +36,19 @@ #define TL_WR841NV9_GPIO_BTN_RESET 12 #define TL_WR841NV9_GPIO_BTN_WIFI 17 +#define TL_WR841NV11_GPIO_LED_SYSTEM 1 +#define TL_WR841NV11_GPIO_LED_QSS 3 +#define TL_WR841NV11_GPIO_LED_WAN 4 +#define TL_WR841NV11_GPIO_LED_WAN_STATUS 2 +#define TL_WR841NV11_GPIO_LED_WLAN 13 +#define TL_WR841NV11_GPIO_LED_LAN1 16 +#define TL_WR841NV11_GPIO_LED_LAN2 15 +#define TL_WR841NV11_GPIO_LED_LAN3 14 +#define TL_WR841NV11_GPIO_LED_LAN4 11 + +#define TL_WR841NV11_GPIO_BTN_RESET 12 +#define TL_WR841NV11_GPIO_BTN_WIFI 17 + #define TL_WR842NV3_GPIO_LED_SYSTEM 2 #define TL_WR842NV3_GPIO_LED_WLAN 3 #define TL_WR842NV3_GPIO_LED_WAN_RED 4 @@ -111,6 +125,46 @@ static struct gpio_keys_button tl_wr841n_v9_gpio_keys[] __initdata = { } }; +static struct gpio_led tl_wr841n_v11_leds_gpio[] __initdata = { + { + .name = "tp-link:green:lan1", + .gpio = TL_WR841NV9_GPIO_LED_LAN1, + .active_low = 1, + }, { + .name = "tp-link:green:lan2", + .gpio = TL_WR841NV9_GPIO_LED_LAN2, + .active_low = 1, + }, { + .name = "tp-link:green:lan3", + .gpio = TL_WR841NV9_GPIO_LED_LAN3, + .active_low = 1, + }, { + .name = "tp-link:green:lan4", + .gpio = TL_WR841NV9_GPIO_LED_LAN4, + .active_low = 1, + }, { + .name = "tp-link:green:qss", + .gpio = TL_WR841NV9_GPIO_LED_QSS, + .active_low = 1, + }, { + .name = "tp-link:green:system", + .gpio = TL_WR841NV11_GPIO_LED_SYSTEM, + .active_low = 1, + }, { + .name = "tp-link:green:wan", + .gpio = TL_WR841NV9_GPIO_LED_WAN, + .active_low = 1, + }, { + .name = "tp-link:green:wan_status", + .gpio = TL_WR841NV11_GPIO_LED_WAN_STATUS, + .active_low = 1, + }, { + .name = "tp-link:green:wlan", + .gpio = TL_WR841NV9_GPIO_LED_WLAN, + .active_low = 1, + }, +}; + static struct gpio_led tl_wr842n_v3_leds_gpio[] __initdata = { { .name = "tp-link:green:lan1", @@ -221,6 +275,21 @@ static void __init tl_wr841n_v9_setup(void) MIPS_MACHINE(ATH79_MACH_TL_WR841N_V9, "TL-WR841N-v9", "TP-LINK TL-WR841N/ND v9", tl_wr841n_v9_setup); +static void __init tl_wr841n_v11_setup(void) +{ + tl_ap143_setup(); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr841n_v11_leds_gpio), + tl_wr841n_v11_leds_gpio); + + ath79_register_gpio_keys_polled(1, TL_WR841NV9_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr841n_v9_gpio_keys), + tl_wr841n_v9_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_TL_WR841N_V11, "TL-WR841N-v11", "TP-LINK TL-WR841N/ND v11", + tl_wr841n_v11_setup); + static void __init tl_wr842n_v3_setup(void) { tl_ap143_setup(); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c new file mode 100644 index 0000000000..622c81f107 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-xm.c @@ -0,0 +1,700 @@ +/* + * Ubiquiti Networks XM (rev 1.0) board support + * + * Copyright (C) 2011 René Bolldorf <xsecute@googlemail.com> + * + * Derived from: mach-pb44.c + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/etherdevice.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ath79.h> +#include <asm/mach-ath79/irq.h> +#include <asm/mach-ath79/ar71xx_regs.h> + +#include <linux/platform_data/phy-at803x.h> + +#include "common.h" +#include "dev-ap9x-pci.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define UBNT_XM_GPIO_LED_L1 0 +#define UBNT_XM_GPIO_LED_L2 1 +#define UBNT_XM_GPIO_LED_L3 11 +#define UBNT_XM_GPIO_LED_L4 7 + +#define UBNT_XM_GPIO_BTN_RESET 12 + +#define UBNT_XM_KEYS_POLL_INTERVAL 20 +#define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) + +#define UBNT_XM_EEPROM_ADDR 0x1fff1000 + +static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { + { + .name = "ubnt:red:link1", + .gpio = UBNT_XM_GPIO_LED_L1, + .active_low = 0, + }, { + .name = "ubnt:orange:link2", + .gpio = UBNT_XM_GPIO_LED_L2, + .active_low = 0, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_XM_GPIO_LED_L3, + .active_low = 0, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_XM_GPIO_LED_L4, + .active_low = 0, + }, +}; + +static struct gpio_keys_button ubnt_xm_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = UBNT_XM_GPIO_BTN_RESET, + .active_low = 1, + } +}; + +#define UBNT_M_WAN_PHYMASK BIT(4) + +static void __init ubnt_xm_init(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), + ubnt_xm_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_m25p80(NULL); + ap91_pci_init(eeprom, NULL); + + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_XM, + "UBNT-XM", + "Ubiquiti Networks XM (rev 1.0) board", + ubnt_xm_init); + +MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", + ubnt_xm_init); + +static void __init ubnt_rocket_m_setup(void) +{ + ubnt_xm_init(); + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", + ubnt_rocket_m_setup); + +static void __init ubnt_nano_m_setup(void) +{ + ubnt_xm_init(); + ath79_register_eth(1); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", + ubnt_nano_m_setup); + +static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { + { + .name = "ubnt:green:globe", + .gpio = 0, + .active_low = 1, + }, { + .name = "ubnt:green:power", + .gpio = 11, + .active_low = 1, + .default_state = LEDS_GPIO_DEFSTATE_ON, + } +}; + +static void __init ubnt_airrouter_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); + + ath79_register_eth(1); + ath79_register_eth(0); + ath79_register_usb(); + + ap91_pci_init(ee, NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), + ubnt_airrouter_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", + ubnt_airrouter_setup); + +static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { + { + .name = "ubnt:orange:dome", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:green:dome", + .gpio = 0, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { + { + .name = "ubnt:orange:front", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:green:front", + .gpio = 0, + .active_low = 0, + } +}; + +static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { + { + .name = "ubnt:white:front", + .gpio = 1, + .active_low = 0, + }, { + .name = "ubnt:blue:front", + .gpio = 0, + .active_low = 0, + } +}; + + +static void __init ubnt_unifi_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); + ath79_register_eth(0); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), + ubnt_unifi_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", + ubnt_unifi_setup); + + +#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) +#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) + +static void __init ubnt_unifi_outdoor_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | + UBNT_UNIFIOD_2ND_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), + ubnt_unifi_outdoor_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", + "Ubiquiti UniFiAP Outdoor", + ubnt_unifi_outdoor_setup); + + +static void __init ubnt_unifi_outdoor_plus_setup(void) +{ + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + ath79_register_m25p80(NULL); + + ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | + UBNT_UNIFIOD_2ND_PHYMASK)); + + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); + ath79_register_eth(0); + ath79_register_eth(1); + + ap91_pci_init(ee, NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), + ubnt_unifi_outdoor_plus_leds_gpio); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", + "Ubiquiti UniFiAP Outdoor+", + ubnt_unifi_outdoor_plus_setup); + + +static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { + { + .name = "ubnt:white:dome", + .gpio = 12, + }, { + .name = "ubnt:blue:dome", + .gpio = 13, + } +}; + +static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = 17, + .active_low = 1, + } +}; + +static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_platform_data uap_pro_ar8327_data = { + .pad0_cfg = &uap_pro_ar8327_pad0_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, +}; + +static struct mdio_board_info uap_pro_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &uap_pro_ar8327_data, + }, +}; + +#define UAP_PRO_MAC0_OFFSET 0x0000 +#define UAP_PRO_MAC1_OFFSET 0x0006 +#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 +#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 + +static void __init ubnt_uap_pro_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), + ubnt_uap_pro_gpio_leds); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(uap_pro_gpio_keys), + uap_pro_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0x0); + mdiobus_register_board_info(uap_pro_mdio0_info, + ARRAY_SIZE(uap_pro_mdio0_info)); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + /* GMAC0 is connected to an AR8327 switch */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", + ubnt_uap_pro_setup); + +#define UBNT_XW_GPIO_LED_L1 11 +#define UBNT_XW_GPIO_LED_L2 16 +#define UBNT_XW_GPIO_LED_L3 13 +#define UBNT_XW_GPIO_LED_L4 14 + +static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { + { + .name = "ubnt:red:link1", + .gpio = UBNT_XW_GPIO_LED_L1, + .active_low = 1, + }, { + .name = "ubnt:orange:link2", + .gpio = UBNT_XW_GPIO_LED_L2, + .active_low = 1, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_XW_GPIO_LED_L3, + .active_low = 1, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_XW_GPIO_LED_L4, + .active_low = 1, + }, +}; + +#define UBNT_ROCKET_TI_GPIO_LED_L1 16 +#define UBNT_ROCKET_TI_GPIO_LED_L2 17 +#define UBNT_ROCKET_TI_GPIO_LED_L3 18 +#define UBNT_ROCKET_TI_GPIO_LED_L4 19 +#define UBNT_ROCKET_TI_GPIO_LED_L5 20 +#define UBNT_ROCKET_TI_GPIO_LED_L6 21 +static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = { + { + .name = "ubnt:green:link1", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L1, + .active_low = 1, + }, { + .name = "ubnt:green:link2", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L2, + .active_low = 1, + }, { + .name = "ubnt:green:link3", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L3, + .active_low = 1, + }, { + .name = "ubnt:green:link4", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L4, + .active_low = 0, + }, { + .name = "ubnt:green:link5", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L5, + .active_low = 0, + }, { + .name = "ubnt:green:link6", + .gpio = UBNT_ROCKET_TI_GPIO_LED_L6, + .active_low = 0, + }, +}; + +static void __init ubnt_xw_init(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), + ubnt_xw_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; +} + +static void __init ubnt_nano_m_xw_setup(void) +{ + ubnt_xw_init(); + + /* GMAC0 is connected to an AR8326 switch */ + ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); + ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_register_eth(0); +} + +static void __init ubnt_loco_m_xw_setup(void) +{ + ubnt_xw_init(); + + ath79_register_mdio(0, ~BIT(1)); + ath79_eth0_data.phy_mask = BIT(1); + ath79_register_eth(0); +} + +static void __init ubnt_rocket_m_xw_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), + ubnt_xw_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + + ath79_register_mdio(0, ~BIT(4)); + ath79_eth0_data.phy_mask = BIT(4); + ath79_eth0_pll_data.pll_1000 = 0x06000000; + ath79_register_eth(0); +} + +static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = { + .disable_smarteee = 1, + .enable_rgmii_rx_delay = 1, + .enable_rgmii_tx_delay = 1, +}; +static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 4, + .platform_data = &ubnt_rocket_m_ti_at803_data, + }, +}; + +static void __init ubnt_rocket_m_ti_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio), + ubnt_rocket_ti_leds_gpio); + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(ubnt_xm_gpio_keys), + ubnt_xm_gpio_keys); + + ap91_pci_init(eeprom + 0x1000, NULL); + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); + ath79_setup_ar934x_eth_rx_delay(3, 3); + ath79_init_mac(ath79_eth0_data.mac_addr, + eeprom + UAP_PRO_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, + eeprom + UAP_PRO_MAC1_OFFSET, 0); + + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; + + mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info, + ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info)); + ath79_register_mdio(0, 0x0); + + + ath79_eth0_data.phy_mask = BIT(4); + /* read out from vendor */ + ath79_eth0_pll_data.pll_1000 = 0x2000000; + ath79_eth0_pll_data.pll_10 = 0x1313; + ath79_register_eth(0); + + ath79_register_mdio(1, 0x0); + ath79_eth1_data.phy_mask = BIT(3); + ath79_register_eth(1); +} + + +MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", + ubnt_nano_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", + ubnt_loco_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW", + ubnt_rocket_m_xw_setup); + +MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI", + ubnt_rocket_m_ti_setup); + +static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { + { + .name = "ubnt:blue:wlan", + .gpio = 0, + }, { + .name = "ubnt:white:status", + .gpio = 1, + }, +}; + +static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + } +}; + +static void __init ubnt_airgateway_setup(void) +{ + u32 t; + u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); + u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); + + + ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | + AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); + + t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); + t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; + ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), + ubnt_airgateway_gpio_leds); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(airgateway_gpio_keys), + airgateway_gpio_keys); + + ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); + ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); + + ath79_register_mdio(0, 0x0); + + ath79_register_eth(1); + ath79_register_eth(0); + + ath79_register_wmac(ee, NULL); +} + +MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", + ubnt_airgateway_setup); + +static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = { + { + .name = "ubnt:blue:wlan", + .gpio = 13, + }, { + .name = "ubnt:white:status", + .gpio = 17, + }, +}; + + +static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, + .gpio = 12, + .active_low = 1, + } +}; + +static void __init ubnt_airgateway_pro_setup(void) +{ + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); + + ath79_register_m25p80(NULL); + ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds), + ubnt_airgateway_pro_gpio_leds); + + ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, + ARRAY_SIZE(airgateway_pro_gpio_keys), + airgateway_pro_gpio_keys); + + ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); + ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); + + + ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); + + ath79_register_mdio(1, 0x0); + + /* GMAC0 is left unused in this configuration */ + + /* GMAC1 is connected to MAC0 on the internal switch */ + /* The PoE/WAN port connects to port 5 on the internal switch */ + /* The LAN port connects to port 4 on the internal switch */ + ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_register_eth(1); + +} + +MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro", + ubnt_airgateway_pro_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c new file mode 100644 index 0000000000..150a28b0d7 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wrtnode2q.c @@ -0,0 +1,126 @@ +/* + * WRTnode2Q board support + * + * Copyright (c) 2013 The Linux Foundation. All rights reserved. + * Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org> + * Copyright (c) 2015 Kelei <xzmu@wrtnode.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include <linux/platform_device.h> +#include <linux/ath9k_platform.h> +#include <linux/ar8216_platform.h> + +#include <asm/mach-ath79/ar71xx_regs.h> + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" +#include "pci.h" + +#define WRTNODE2Q_GPIO_LED_WLAN 12 +#define WRTNODE2Q_GPIO_LED_WPS 13 +#define WRTNODE2Q_GPIO_LED_STATUS 13 + +#define WRTNODE2Q_GPIO_LED_WAN 4 +#define WRTNODE2Q_GPIO_LED_LAN1 16 +#define WRTNODE2Q_GPIO_LED_LAN2 15 +#define WRTNODE2Q_GPIO_LED_LAN3 14 +#define WRTNODE2Q_GPIO_LED_LAN4 11 + +#define WRTNODE2Q_GPIO_BTN_WPS 17 + +#define WRTNODE2Q_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL (3 * WRTNODE2Q_KEYS_POLL_INTERVAL) + +#define WRTNODE2Q_MAC0_OFFSET 0 +#define WRTNODE2Q_WMAC_CALDATA_OFFSET 0x1000 + +static struct gpio_led wrtnode2q_leds_gpio[] __initdata = { + { + .name = "wrtnode2q:green:status", + .gpio = WRTNODE2Q_GPIO_LED_STATUS, + .active_low = 1, + }, + { + .name = "wrtnode2q:green:wlan", + .gpio = WRTNODE2Q_GPIO_LED_WLAN, + .active_low = 1, + } +}; + +static struct gpio_keys_button wrtnode2q_gpio_keys[] __initdata = { + { + .desc = "WPS button", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = WRTNODE2Q_KEYS_DEBOUNCE_INTERVAL, + .gpio = WRTNODE2Q_GPIO_BTN_WPS, + .active_low = 1, + }, +}; + +static void __init wrtnode2q_gpio_led_setup(void) +{ + ath79_register_leds_gpio(-1, ARRAY_SIZE(wrtnode2q_leds_gpio), + wrtnode2q_leds_gpio); + ath79_register_gpio_keys_polled(-1, WRTNODE2Q_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wrtnode2q_gpio_keys), + wrtnode2q_gpio_keys); +} + +static void __init wrtnode2q_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1f040000); + + ath79_register_m25p80(NULL); + + wrtnode2q_gpio_led_setup(); + + ath79_register_pci(); + ath79_register_usb(); + + ath79_register_wmac(art + WRTNODE2Q_WMAC_CALDATA_OFFSET, NULL); + + ath79_register_mdio(0, 0x0); + ath79_register_mdio(1, 0x0); + + ath79_init_mac(ath79_eth0_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 0); + ath79_init_mac(ath79_eth1_data.mac_addr, art + WRTNODE2Q_MAC0_OFFSET, 1); + + /* LAN ports */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_switch_data.phy_poll_mask |= BIT(4); + ath79_switch_data.phy4_mii_en = 1; + ath79_register_eth(1); + + /* WAN port */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; + ath79_eth0_data.speed = SPEED_100; + ath79_eth0_data.duplex = DUPLEX_FULL; + ath79_eth0_data.phy_mask = BIT(4); + ath79_register_eth(0); +} + +MIPS_MACHINE(ATH79_MACH_WRTNODE2Q, "WRTNODE2Q", "WRTnode2Q board", + wrtnode2q_setup);
\ No newline at end of file diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h index f53efff0b6..f40b4a43b5 100644 --- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h +++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h @@ -51,6 +51,7 @@ enum ath79_mach_type { ATH79_MACH_CAP4200AG, /* Senao CAP4200AG */ ATH79_MACH_CARAMBOLA2, /* 8devices Carambola2 */ ATH79_MACH_CF_E316N_V2, /* COMFAST CF-E316N v2 */ + ATH79_MACH_CPE210, /* TP-LINK CPE210 */ ATH79_MACH_CPE510, /* TP-LINK CPE510 */ ATH79_MACH_CR3000, /* PowerCloud CR3000 */ ATH79_MACH_CR5000, /* PowerCloud CR5000 */ @@ -97,6 +98,7 @@ enum ath79_mach_type { ATH79_MACH_MR16, /* Cisco Meraki MR16 */ ATH79_MACH_MR18, /* Cisco Meraki MR18 */ ATH79_MACH_MR1750, /* OpenMesh MR1750 */ + ATH79_MACH_MR1750V2, /* OpenMesh MR1750v2 */ ATH79_MACH_MR600V2, /* OpenMesh MR600v2 */ ATH79_MACH_MR600, /* OpenMesh MR600 */ ATH79_MACH_MR900, /* OpenMesh MR900 */ @@ -110,6 +112,7 @@ enum ath79_mach_type { ATH79_MACH_NBG6616, /* Zyxel NBG6616 */ ATH79_MACH_NBG6716, /* Zyxel NBG6716 */ ATH79_MACH_OM2P_HSv2, /* OpenMesh OM2P-HSv2 */ + ATH79_MACH_OM2P_HSv3, /* OpenMesh OM2P-HSv3 */ ATH79_MACH_OM2P_HS, /* OpenMesh OM2P-HS */ ATH79_MACH_OM2P_LC, /* OpenMesh OM2P-LC */ ATH79_MACH_OM2Pv2, /* OpenMesh OM2Pv2 */ @@ -150,6 +153,7 @@ enum ath79_mach_type { ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */ ATH79_MACH_RW2458N, /* Redwave RW2458N */ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */ + ATH79_MACH_SOM9331, /* OpenEmbed SOM9331 */ ATH79_MACH_TELLSTICK_ZNET_LITE, /* TellStick ZNet Lite */ ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */ ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */ @@ -199,6 +203,7 @@ enum ath79_mach_type { ATH79_MACH_TL_WR841N_V7, /* TP-LINK TL-WR841N/ND v7 */ ATH79_MACH_TL_WR841N_V8, /* TP-LINK TL-WR841N/ND v8 */ ATH79_MACH_TL_WR841N_V9, /* TP-LINK TL-WR841N/ND v9 */ + ATH79_MACH_TL_WR841N_V11, /* TP-LINK TL-WR841N/ND v11 */ ATH79_MACH_TL_WR842N_V2, /* TP-LINK TL-WR842N/ND v2 */ ATH79_MACH_TL_WR842N_V3, /* TP-LINK TL-WR842N/ND v3 */ ATH79_MACH_TL_WR941ND, /* TP-LINK TL-WR941ND */ @@ -251,6 +256,7 @@ enum ath79_mach_type { ATH79_MACH_WPJ558, /* Compex WPJ558 */ ATH79_MACH_WRT160NL, /* Linksys WRT160NL */ ATH79_MACH_WRT400N, /* Linksys WRT400N */ + ATH79_MACH_WRTNODE2Q, /* WRTnode2Q */ ATH79_MACH_WZR_HP_AG300H, /* Buffalo WZR-HP-AG300H */ ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ diff --git a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c index 38226cf22e..d5253609cd 100644 --- a/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c +++ b/target/linux/ar71xx/files/drivers/net/ethernet/atheros/ag71xx/ag71xx_main.c @@ -453,9 +453,17 @@ static void ag71xx_hw_stop(struct ag71xx *ag) static void ag71xx_hw_setup(struct ag71xx *ag) { struct ag71xx_platform_data *pdata = ag71xx_get_pdata(ag); + struct ag71xx_mdio_platform_data *mpdata; + u32 init = MAC_CFG1_INIT; + + if (pdata->mii_bus_dev && ag->pdev->id == 0) { + mpdata = pdata->mii_bus_dev->platform_data; + if (mpdata && mpdata->builtin_switch) + init |= MAC_CFG1_TFC | MAC_CFG1_RFC; + } /* setup MAC configuration registers */ - ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, MAC_CFG1_INIT); + ag71xx_wr(ag, AG71XX_REG_MAC_CFG1, init); ag71xx_sb(ag, AG71XX_REG_MAC_CFG2, MAC_CFG2_PAD_CRC_EN | MAC_CFG2_LEN_CHECK); diff --git a/target/linux/ar71xx/generic/profiles/00-default.mk b/target/linux/ar71xx/generic/profiles/00-default.mk index 36c4aa61b9..bf0f3fa5e6 100644 --- a/target/linux/ar71xx/generic/profiles/00-default.mk +++ b/target/linux/ar71xx/generic/profiles/00-default.mk @@ -9,6 +9,7 @@ define Profile/Default NAME:=Default Profile (all drivers) PACKAGES:= \ kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-ledtrig-usbdev + PRIORITY := 1 endef define Profile/Default/Description diff --git a/target/linux/ar71xx/generic/profiles/01-minimal.mk b/target/linux/ar71xx/generic/profiles/01-minimal.mk index dfaa3b0b37..54e6c6ddfb 100644 --- a/target/linux/ar71xx/generic/profiles/01-minimal.mk +++ b/target/linux/ar71xx/generic/profiles/01-minimal.mk @@ -8,6 +8,7 @@ define Profile/Minimal NAME:=Minimal Profile (no drivers) PACKAGES:=-kmod-ath9k -wpad-mini + PRIORITY := 2 endef define Profile/Minimal/Description diff --git a/target/linux/ar71xx/generic/profiles/02-ath5k.mk b/target/linux/ar71xx/generic/profiles/02-ath5k.mk index 78203497f3..baa92b3391 100644 --- a/target/linux/ar71xx/generic/profiles/02-ath5k.mk +++ b/target/linux/ar71xx/generic/profiles/02-ath5k.mk @@ -8,6 +8,7 @@ define Profile/ath5k NAME:=Atheros 802.11abg WiFi (ath5k) PACKAGES:=kmod-ath5k -kmod-ath9k + PRIORITY := 3 endef define Profile/ath5k/Description diff --git a/target/linux/ar71xx/generic/profiles/openembed.mk b/target/linux/ar71xx/generic/profiles/openembed.mk new file mode 100644 index 0000000000..2603e0a4cb --- /dev/null +++ b/target/linux/ar71xx/generic/profiles/openembed.mk @@ -0,0 +1,13 @@ +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. + +define Profile/SOM9331 + NAME:=OpenEmbed SOM9331 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage kmod-i2c-core kmod-i2c-gpio-custom kmod-spi-bitbang kmod-spi-dev kmod-spi-gpio kmod-spi-gpio-custom kmod-usb-serial +endef + +define Profile/SOM9331/Description + Package set optimized for the OpenEmbed SOM9331. +endef +$(eval $(call Profile,SOM9331)) + diff --git a/target/linux/ar71xx/generic/profiles/openmesh.mk b/target/linux/ar71xx/generic/profiles/openmesh.mk index 6817c597b0..dbdf16959f 100644 --- a/target/linux/ar71xx/generic/profiles/openmesh.mk +++ b/target/linux/ar71xx/generic/profiles/openmesh.mk @@ -5,17 +5,6 @@ # See /LICENSE for more information. # -define Profile/OM2P - NAME:=OpenMesh OM2P/OM2Pv2/OM2P-HS/OM2P-HSv2/OM2P-LC - PACKAGES:=kmod-ath9k om-watchdog -endef - -define Profile/OM2P/Description - Package set optimized for the OpenMesh OM2P/OM2Pv2/OM2P-HS/OM2P-HSv2/OM2P-LC. -endef - -$(eval $(call Profile,OM2P)) - define Profile/OM5P NAME:=OpenMesh OM5P/OM5P-AN PACKAGES:=kmod-ath9k om-watchdog @@ -61,12 +50,12 @@ endef $(eval $(call Profile,MR900)) define Profile/MR1750 - NAME:=OpenMesh MR1750 + NAME:=OpenMesh MR1750/MR1750v2 PACKAGES:=kmod-ath9k kmod-ath10k endef define Profile/MR1750/Description - Package set optimized for the OpenMesh MR1750. + Package set optimized for the OpenMesh MR1750/MR1750v2. endef $(eval $(call Profile,MR1750)) diff --git a/target/linux/ar71xx/generic/profiles/wrtnode.mk b/target/linux/ar71xx/generic/profiles/wrtnode.mk new file mode 100644 index 0000000000..35e6f92481 --- /dev/null +++ b/target/linux/ar71xx/generic/profiles/wrtnode.mk @@ -0,0 +1,17 @@ +# +# Copyright (C) 2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. +# + +define Profile/WRTNODE2Q + NAME:=WRTnode2Q board + PACKAGES:=kmod-usb-core kmod-usb2 kmod-usb-storage +endef + +define Profile/WRTNODE2Q/Description + Package set optimized for the WRTnode2Q board. +endef + +$(eval $(call Profile,WRTNODE2Q))
\ No newline at end of file diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index 96122d77ae..2380a62cb4 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -16,6 +16,16 @@ KERNEL_LOADADDR = 0x80060000 DEVICE_VARS += NETGEAR_KERNEL_MAGIC NETGEAR_BOARD_ID NETGEAR_HW_ID CMDLINE CONSOLE IMAGE_SIZE BOARDNAME LOADER_FLASH_OFFS LOADER_TYPE +ifeq ($(SUBTARGET),generic) +include ./tp-link.mk +include ./ubnt.mk +include ./generic.mk +endif +ifeq ($(SUBTARGET),nand) +include ./nand.mk +endif +include ./legacy.mk + define Build/netgear-squashfs rm -rf $@.fs $@.squashfs mkdir -p $@.fs/image @@ -39,53 +49,6 @@ define Build/netgear-uImage $(call Build/uImage,$(1) -M $(NETGEAR_KERNEL_MAGIC)) endef -# combine kernel and rootfs into one image -# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> -# <type> is "sysupgrade" or "factory" -# -# -a align the rootfs start on an <align> bytes boundary -# -j add jffs2 end-of-filesystem markers -# -s strip padding from end of the image -# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) -define Build/mktplinkfw - -$(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ - -m $(TPLINK_HEADER_VERSION) \ - -k $(word 1,$^) \ - -r $@ \ - -o $@.new \ - -j -X 0x40000 \ - -a $(call rootfs_align,$(FILESYSTEM)) \ - $(wordlist 2,$(words $(1)),$(1)) \ - $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@ -endef - -# mktplinkfw-initramfs <optional extra arguments to mktplinkfw binary> -# -# -c combined image -define Build/mktplinkfw-initramfs - $(STAGING_DIR_HOST)/bin/mktplinkfw \ - -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \ - -m $(TPLINK_HEADER_VERSION) \ - -k $@ \ - -o $@.new \ - -s -S \ - -c - @mv $@.new $@ -endef - -define Build/tplink-safeloader - -$(STAGING_DIR_HOST)/bin/tplink-safeloader \ - -B $(TPLINK_BOARD_NAME) \ - -V $(REVISION) \ - -k $(word 1,$^) \ - -r $@ \ - -o $@.new \ - -j \ - $(wordlist 2,$(words $(1)),$(1)) \ - $(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@ -endef - define Build/loader-common rm -rf $@.src $(MAKE) -C lzma-loader \ @@ -120,45 +83,6 @@ define Build/copy-file cat "$(1)" > "$@" endef -DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME - -# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) -# UBNT_TYPE e.g. one of (BZ, XM, XW) -# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) - -# mkubntimage is using the kernel image direct -# routerboard creates partitions out of the ubnt header -define Build/mkubntimage - $(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ - -k $(word 1,$^) \ - -r $@ \ - -o $@ -endef - -# all UBNT XM device expect the kernel image to have 1024k while flash, when -# booting the image, the size doesn't matter. -define Build/mkubntimage-split - dd if=$@ of=$@.old1 bs=1024k count=1 - dd if=$@ of=$@.old2 bs=1024k skip=1 - $(STAGING_DIR_HOST)/bin/mkfwimage \ - -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ - -k $@.old1 \ - -r $@.old2 \ - -o $@ - rm $@.old1 $@.old2 -endef - -define Build/mkubntimage2 - $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ - -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ - -p jffs2:0x50000:0xf60000:0:0:$@ \ - -o $@.new - @mv $@.new $@ -endef - -DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE - define Device/Default BOARDNAME := DEVICE_PROFILE = $$(BOARDNAME) @@ -175,2478 +99,4 @@ define Device/Default IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) endef -define Device/bsb - BOARDNAME = BSB - IMAGE_SIZE = 16000k - CONSOLE = ttyATH0,115200 - MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro -endef -TARGET_DEVICES += bsb - -define Device/carambola2 - BOARDNAME = CARAMBOLA2 - IMAGE_SIZE = 16000k - CONSOLE = ttyATH0,115200 - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += carambola2 - -define Device/cf-e316n-v2 - BOARDNAME = CF-E316N-V2 - IMAGE_SIZE = 16192k - CONSOLE = ttyS0,115200 - MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro -endef -TARGET_DEVICES += cf-e316n-v2 - -define Device/weio - BOARDNAME = WEIO - IMAGE_SIZE = 16000k - CONSOLE = ttyATH0,115200 - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += weio - -define Device/gl-ar150 - BOARDNAME = GL-AR150 - IMAGE_SIZE = 16000k - CONSOLE = ttyATH0,115200 - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-ar150 - -define Device/gl-ar300 - BOARDNAME = GL-AR300 - IMAGE_SIZE = 16000k - CONSOLE = ttyS0,115200 - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-ar300 - -define Device/gl-domino - BOARDNAME = DOMINO - IMAGE_SIZE = 16000k - CONSOLE = ttyATH0,115200 - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro -endef -TARGET_DEVICES += gl-domino - -define Device/wndr3700 - BOARDNAME = WNDR3700 - NETGEAR_KERNEL_MAGIC = 0x33373030 - NETGEAR_BOARD_ID = WNDR3700 - IMAGE_SIZE = 7680k - MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro - IMAGES := sysupgrade.bin factory.img factory-NA.img - KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma - IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs - IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) - IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) -endef - -define Device/wndr3700v2 -$(Device/wndr3700) - NETGEAR_BOARD_ID = WNDR3700v2 - NETGEAR_KERNEL_MAGIC = 0x33373031 - NETGEAR_HW_ID = 29763654+16+64 - IMAGE_SIZE = 15872k - MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro - IMAGES := sysupgrade.bin factory.img -endef - -define Device/wndr3800 -$(Device/wndr3700v2) - NETGEAR_BOARD_ID = WNDR3800 - NETGEAR_HW_ID = 29763654+16+128 -endef - -define Device/wndr3800ch -$(Device/wndr3800) - NETGEAR_BOARD_ID = WNDR3800CH -endef - -define Device/wndrmac -$(Device/wndr3700v2) - NETGEAR_BOARD_ID = WNDRMAC -endef - -define Device/wndrmacv2 -$(Device/wndr3800) - NETGEAR_BOARD_ID = WNDRMACv2 -endef - -TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2 - -define Device/tplink - TPLINK_HWREV := 0x1 - TPLINK_HEADER_VERSION := 1 - LOADER_TYPE := gz - KERNEL := kernel-bin | patch-cmdline | lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -endef - -define Device/tplink-nolzma -$(Device/tplink) - LOADER_FLASH_OFFS := 0x22000 - COMPILE := loader-$(1).gz - COMPILE/loader-$(1).gz := loader-okli-compile - KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) - KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-initramfs -endef - -define Device/tplink-4m -$(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 4M - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8m -$(Device/tplink-nolzma) - TPLINK_FLASHLAYOUT := 8M - IMAGE_SIZE := 7936k -endef - -define Device/tplink-4mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 4Mlzma - IMAGE_SIZE := 3904k -endef - -define Device/tplink-8mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 8Mlzma - IMAGE_SIZE := 7936k -endef - -define Device/tplink-16mlzma -$(Device/tplink) - TPLINK_FLASHLAYOUT := 16Mlzma - IMAGE_SIZE := 15872k -endef - -define Device/cpe210-220-510-520 - MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) - IMAGE_SIZE := 7680k - BOARDNAME := CPE510 - TPLINK_BOARD_NAME := CPE510 - LOADER_TYPE := elf - KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade - IMAGE/factory.bin := append-rootfs | tplink-safeloader factory -endef -TARGET_DEVICES += cpe210-220-510-520 - -define Device/tl-wdr4300-v1 -$(Device/tplink-8mlzma) - BOARDNAME = TL-WDR4300 - DEVICE_PROFILE = TLWDR4300 - TPLINK_HWID := 0x43000001 -endef - -define Device/tl-wdr3500-v1 -$(Device/tl-wdr4300-v1) - BOARDNAME = TL-WDR3500 - TPLINK_HWID := 0x35000001 -endef - -define Device/tl-wdr3600-v1 -$(Device/tl-wdr4300-v1) - TPLINK_HWID := 0x36000001 -endef - -define Device/tl-wdr4300-v1-il -$(Device/tl-wdr4300-v1) - TPLINK_HWID := 0x43008001 -endef - -define Device/tl-wdr4310-v1 -$(Device/tl-wdr4300-v1) - TPLINK_HWID := 0x43100001 -endef - -define Device/mw4530r-v1 -$(Device/tl-wdr4300-v1) - TPLINK_HWID := 0x45300001 -endef -TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1 - -define Device/tl-wdr6500-v2 -$(Device/tplink-8mlzma) - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | mktplinkfw-initramfs - BOARDNAME = TL-WDR6500-v2 - DEVICE_PROFILE = TLWDR6500V2 - TPLINK_HWID := 0x65000002 - TPLINK_HEADER_VERSION := 2 -endef -TARGET_DEVICES += tl-wdr6500-v2 - -define Device/tl-wdr3320-v2 -$(Device/tplink-4mlzma) - BOARDNAME = TL-WDR3320-v2 - DEVICE_PROFILE = TLWDR3320V2 - TPLINK_HWID := 0x33200002 - TPLINK_HEADER_VERSION := 2 -endef -TARGET_DEVICES += tl-wdr3320-v2 - -define Device/archer-c5-v1 - $(Device/tplink-16mlzma) - BOARDNAME := ARCHER-C5 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0xc5000001 -endef - -define Device/archer-c7-v1 - $(Device/tplink-8mlzma) - BOARDNAME := ARCHER-C7 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0x75000001 -endef - -define Device/archer-c7-v2 - $(Device/tplink-16mlzma) - BOARDNAME := ARCHER-C7-V2 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0xc7000002 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US -endef - -define Device/tl-wdr7500-v3 - $(Device/tplink-8mlzma) - BOARDNAME := ARCHER-C7 - DEVICE_PROFILE := ARCHERC7 - TPLINK_HWID := 0x75000003 -endef -TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 tl-wdr7500-v3 - -define Device/cap324 - BOARDNAME := CAP324 - DEVICE_PROFILE := CAP324 - IMAGE_SIZE = 15296k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art) -endef - -TARGET_DEVICES += cap324 - -define Device/cap324-nocloud - BOARDNAME := CAP324 - DEVICE_PROFILE := CAP324 - IMAGE_SIZE = 16000k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,16000k(firmware),64k(art) -endef - -TARGET_DEVICES += cap324-nocloud - -define Device/cr3000 - BOARDNAME := CR3000 - DEVICE_PROFILE := CR3000 - IMAGE_SIZE = 7104k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art) -endef - -TARGET_DEVICES += cr3000 - -define Device/cr3000-nocloud - BOARDNAME := CR3000 - DEVICE_PROFILE := CR3000 - IMAGE_SIZE = 7808k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art) -endef - -TARGET_DEVICES += cr3000-nocloud - -define Device/cr5000 - BOARDNAME := CR5000 - DEVICE_PROFILE := CR5000 - IMAGE_SIZE = 7104k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art) -endef - -TARGET_DEVICES += cr5000 - -define Device/cr5000-nocloud - BOARDNAME := CR5000 - DEVICE_PROFILE := CR5000 - IMAGE_SIZE = 7808k - MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art) -endef - -TARGET_DEVICES += cr5000-nocloud - -define Device/antminer-s1 - $(Device/tplink-8mlzma) - BOARDNAME := ANTMINER-S1 - DEVICE_PROFILE := ANTMINERS1 - TPLINK_HWID := 0x04440101 - CONSOLE := ttyATH0,115200 -endef - -define Device/antminer-s3 - $(Device/tplink-8mlzma) - BOARDNAME := ANTMINER-S3 - DEVICE_PROFILE := ANTMINERS3 - TPLINK_HWID := 0x04440301 - CONSOLE := ttyATH0,115200 -endef - -define Device/antrouter-r1 - $(Device/tplink-8mlzma) - BOARDNAME := ANTROUTER-R1 - DEVICE_PROFILE := ANTROUTERR1 - TPLINK_HWID := 0x44440101 - CONSOLE := ttyATH0,115200 -endef - -define Device/el-m150 - $(Device/tplink-8mlzma) - BOARDNAME := EL-M150 - DEVICE_PROFILE := ELM150 - TPLINK_HWID := 0x01500101 - CONSOLE := ttyATH0,115200 -endef - -define Device/el-mini - $(Device/tplink-8mlzma) - BOARDNAME := EL-MINI - DEVICE_PROFILE := ELMINI - TPLINK_HWID := 0x01530001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini - -define Device/gl-inet-6408A-v1 - $(Device/tplink-8mlzma) - BOARDNAME := GL-INET - DEVICE_PROFILE := GLINET - TPLINK_HWID := 0x08000001 - CONSOLE := ttyATH0,115200 -endef - -define Device/gl-inet-6416A-v1 - $(Device/tplink-16mlzma) - BOARDNAME := GL-INET - DEVICE_PROFILE := GLINET - TPLINK_HWID := 0x08000001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1 - -define Device/rnx-n360rt - $(Device/tplink-4m) - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := RNXN360RT - TPLINK_HWID := 0x09410002 - TPLINK_HWREV := 0x00420001 -endef -TARGET_DEVICES += rnx-n360rt - -define Device/mc-mac1200r - $(Device/tplink-8mlzma) - BOARDNAME := MC-MAC1200R - DEVICE_PROFILE := MAC1200R - TPLINK_HWID := 0x12000001 -endef -TARGET_DEVICES += mc-mac1200r - -define Device/minibox-v1 - $(Device/tplink-16mlzma) - BOARDNAME := MINIBOX-V1 - DEVICE_PROFILE := MINIBOXV1 - TPLINK_HWID := 0x3C000201 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += minibox-v1 - -define Device/omy-g1 - $(Device/tplink-16mlzma) - BOARDNAME := OMY-G1 - DEVICE_PROFILE := OMYG1 - TPLINK_HWID := 0x06660101 -endef - -define Device/omy-x1 - $(Device/tplink-8mlzma) - BOARDNAME := OMY-X1 - DEVICE_PROFILE := OMYX1 - TPLINK_HWID := 0x06660201 -endef -TARGET_DEVICES += omy-g1 omy-x1 - -define Device/onion-omega - $(Device/tplink-16mlzma) - BOARDNAME := ONION-OMEGA - DEVICE_PROFILE := OMEGA - TPLINK_HWID := 0x04700001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += onion-omega - -define Device/tl-mr10u-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR10U - DEVICE_PROFILE := TLMR10U - TPLINK_HWID := 0x00100101 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr11u-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR11U - DEVICE_PROFILE := TLMR11U - TPLINK_HWID := 0x00110101 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr11u-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR11U - DEVICE_PROFILE := TLMR11U - TPLINK_HWID := 0x00110102 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr12u-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR13U - DEVICE_PROFILE := TLMR12U - TPLINK_HWID := 0x00120101 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr13u-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR13U - DEVICE_PROFILE := TLMR13U - TPLINK_HWID := 0x00130101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-mr10u-v1 tl-mr11u-v1 tl-mr11u-v2 tl-mr12u-v1 tl-mr13u-v1 - -define Device/tl-mr3020-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR3020 - DEVICE_PROFILE := TLMR3020 - TPLINK_HWID := 0x30200001 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr3040-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR3040 - DEVICE_PROFILE := TLMR3040 - TPLINK_HWID := 0x30400001 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr3040-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR3040-v2 - DEVICE_PROFILE := TLMR3040 - TPLINK_HWID := 0x30400002 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr3220-v1 - $(Device/tplink-4m) - BOARDNAME := TL-MR3220 - DEVICE_PROFILE := TLMR3220 - TPLINK_HWID := 0x32200001 -endef - -define Device/tl-mr3220-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR3220-v2 - DEVICE_PROFILE := TLMR3220 - TPLINK_HWID := 0x32200002 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-mr3420-v1 - $(Device/tplink-4m) - BOARDNAME := TL-MR3420 - DEVICE_PROFILE := TLMR3420 - TPLINK_HWID := 0x34200001 -endef - -define Device/tl-mr3420-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-MR3420-v2 - DEVICE_PROFILE := TLMR3420 - TPLINK_HWID := 0x34200002 -endef -TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2 - -define Device/tl-wr703n-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR703N - DEVICE_PROFILE := TLWR703 - TPLINK_HWID := 0x07030101 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr710n-v1 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR710N - DEVICE_PROFILE := TLWR710 - TPLINK_HWID := 0x07100001 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr710n-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR710N - DEVICE_PROFILE := TLWR710 - TPLINK_HWID := 0x07100002 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr710n-v2.1 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR710N - DEVICE_PROFILE := TLWR710 - TPLINK_HWID := 0x07100002 - TPLINK_HWREV := 0x00000002 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr720n-v3 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR720N-v3 - DEVICE_PROFILE := TLWR720 - TPLINK_HWID := 0x07200103 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr720n-v4 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR720N-v3 - DEVICE_PROFILE := TLWR720 - TPLINK_HWID := 0x07200104 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr710n-v2.1 tl-wr720n-v3 tl-wr720n-v4 - -define Device/tl-wr740n-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400001 -endef - -define Device/tl-wr740n-v3 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400003 -endef - -define Device/tl-wr740n-v4 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400004 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr740n-v5 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400005 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr740n-v6 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v9 - DEVICE_PROFILE := TLWR740 - TPLINK_HWID := 0x07400006 -endef - -define Device/tl-wr741nd-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07410001 -endef - -define Device/tl-wr741nd-v2 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07410001 -endef - -define Device/tl-wr741nd-v4 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07410004 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr741nd-v5 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR741 - TPLINK_HWID := 0x07400005 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wr810n - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR810N - DEVICE_PROFILE := TLWR810 - TPLINK_HWID := 0x08100001 -endef -TARGET_DEVICES += tl-wr810n - -define Device/tl-wr743nd-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR743 - TPLINK_HWID := 0x07430001 -endef - -define Device/tl-wr743nd-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR741ND-v4 - DEVICE_PROFILE := TLWR743 - TPLINK_HWID := 0x07430002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n-v6 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr741nd-v5 tl-wr743nd-v1 tl-wr743nd-v2 - -define Device/tl-wr841-v1.5 - $(Device/tplink-4m) - BOARDNAME := TL-WR841N-v1.5 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410002 - TPLINK_HWREV := 2 -endef - -define Device/tl-wr841-v3 - $(Device/tplink-4m) - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410003 - TPLINK_HWREV := 3 -endef - -define Device/tl-wr841-v5 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410005 -endef - -define Device/tl-wr841-v7 - $(Device/tplink-4m) - BOARDNAME := TL-WR841N-v7 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410007 -endef - -define Device/tl-wr841-v8 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410008 -endef - -define Device/tl-wr841-v9 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v9 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410009 -endef - -define Device/tl-wr841-v10 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v9 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410010 -endef - -define Device/tl-wr841-v11 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v9 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08410011 -endef - -define Device/tl-wr842n-v1 - $(Device/tplink-8m) - BOARDNAME := TL-MR3420 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x08420001 -endef - -define Device/tl-wr842n-v2 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR842N-v2 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x8420002 -endef - -define Device/tl-wr842n-v3 - $(Device/tplink-16mlzma) - BOARDNAME := TL-WR842N-v3 - DEVICE_PROFILE := TLWR842 - TPLINK_HWID := 0x08420003 -endef - -define Device/tl-wr843nd-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR843 - TPLINK_HWID := 0x08430001 -endef - -define Device/tl-wr847n-v8 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR841N-v8 - DEVICE_PROFILE := TLWR841 - TPLINK_HWID := 0x08470008 -endef -TARGET_DEVICES += tl-wr841-v1.5 tl-wr841-v3 tl-wr841-v5 tl-wr841-v7 tl-wr841-v8 tl-wr841-v9 tl-wr841-v10 tl-wr841-v11 tl-wr842n-v1 tl-wr842n-v2 tl-wr842n-v3 tl-wr843nd-v1 tl-wr847n-v8 - -define Device/tl-wr941nd-v2 - $(Device/tplink-4m) - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410002 - TPLINK_HWREV := 2 -endef - -define Device/tl-wr941nd-v3 - $(Device/tplink-4m) - BOARDNAME := TL-WR941ND - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410002 - TPLINK_HWREV := 2 -endef - -define Device/tl-wr941nd-v4 - $(Device/tplink-4m) - BOARDNAME := TL-WR741ND - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410004 -endef - -define Device/tl-wr941nd-v5 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR941ND-v5 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410005 -endef - -define Device/tl-wr941nd-v6 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR941ND-v6 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410006 -endef - -# Chinese version (unlike European) is similar to the TL-WDR3500 -define Device/tl-wr941nd-v6-cn - $(Device/tplink-4mlzma) - BOARDNAME := TL-WDR3500 - DEVICE_PROFILE := TLWR941 - TPLINK_HWID := 0x09410006 -endef -TARGET_DEVICES += tl-wr941nd-v2 tl-wr941nd-v3 tl-wr941nd-v4 tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn - -define Device/tl-wr1041n-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WR1041N-v2 - DEVICE_PROFILE := TLWR1041 - TPLINK_HWID := 0x10410002 -endef -TARGET_DEVICES += tl-wr1041n-v2 - -define Device/tl-wr1043nd-v1 - $(Device/tplink-8m) - BOARDNAME := TL-WR1043ND - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430001 -endef - -define Device/tl-wr1043nd-v2 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR1043ND-v2 - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430002 -endef - -define Device/tl-wr1043nd-v3 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR1043ND-v2 - DEVICE_PROFILE := TLWR1043 - TPLINK_HWID := 0x10430003 -endef -TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 - -define Device/tl-wr2543-v1 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WR2543N - DEVICE_PROFILE := TLWR2543 - TPLINK_HWID := 0x25430001 - IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 - IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99 -endef -TARGET_DEVICES += tl-wr2543-v1 - -define Device/tl-wdr4900-v2 - $(Device/tplink-8mlzma) - BOARDNAME := TL-WDR4900-v2 - DEVICE_PROFILE := TLWDR4900V2 - TPLINK_HWID := 0x49000002 -endef -TARGET_DEVICES += tl-wdr4900-v2 - -define Device/tl-wa701nd-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA701 - TPLINK_HWID := 0x07010001 -endef - -define Device/tl-wa701nd-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA701ND-v2 - DEVICE_PROFILE := TLWA701 - TPLINK_HWID := 0x07010002 - CONSOLE := ttyATH0,115200 -endef - -define Device/tl-wa730re-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA730RE - TPLINK_HWID := 0x07300001 -endef - -define Device/tl-wa750re-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA750RE - DEVICE_PROFILE := TLWA750 - TPLINK_HWID := 0x07500001 -endef - -define Device/tl-wa7510n - $(Device/tplink-4m) - BOARDNAME := TL-WA7510N - DEVICE_PROFILE := TLWA7510 - TPLINK_HWID := 0x75100001 -endef -TARGET_DEVICES += tl-wa701nd-v1 tl-wa701nd-v2 tl-wa730re-v1 tl-wa750re-v1 tl-wa7510n - -define Device/tl-wa801nd-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010001 -endef - -define Device/tl-wa801nd-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA801ND-v2 - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010002 -endef - -define Device/tl-wa801nd-v3 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA801ND-v3 - DEVICE_PROFILE := TLWA801 - TPLINK_HWID := 0x08010003 -endef - -define Device/tl-wa830re-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA830 - TPLINK_HWID := 0x08300010 -endef - -define Device/tl-wa830re-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA830RE-v2 - DEVICE_PROFILE := TLWA830 - TPLINK_HWID := 0x08300002 -endef - -define Device/tl-wa850re-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA850RE - DEVICE_PROFILE := TLWA850 - TPLINK_HWID := 0x08500001 -endef - -define Device/tl-wa860re-v1 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA860RE - DEVICE_PROFILE := TLWA860 - TPLINK_HWID := 0x08600001 -endef -TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1 - -define Device/tl-wa901nd-v1 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010001 -endef - -define Device/tl-wa901nd-v2 - $(Device/tplink-4m) - BOARDNAME := TL-WA901ND-v2 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010002 -endef - -define Device/tl-wa901nd-v3 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA901ND-v3 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010003 -endef - -define Device/tl-wa901nd-v4 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA901ND-v4 - DEVICE_PROFILE := TLWA901 - TPLINK_HWID := 0x09010004 -endef - -TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3 tl-wa901nd-v4 - -define Device/tl-wa7210n-v2 - $(Device/tplink-4mlzma) - BOARDNAME := TL-WA7210N-v2 - DEVICE_PROFILE := TLWA7210 - TPLINK_HWID := 0x72100002 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tl-wa7210n-v2 - -define Device/smart-300 - $(Device/tplink-8mlzma) - BOARDNAME := SMART-300 - DEVICE_PROFILE := SMART-300 - TPLINK_HWID := 0x93410001 -endef -TARGET_DEVICES += smart-300 - -define Device/tellstick-znet-lite - $(Device/tplink-16mlzma) - BOARDNAME := TELLSTICK-ZNET-LITE - DEVICE_PROFILE := TELLSTICKZNETLITE - TPLINK_HWID := 0x00726001 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += tellstick-znet-lite - -define Device/oolite - $(Device/tplink-16mlzma) - BOARDNAME := GS-OOLITE - DEVICE_PROFILE := OOLITE - TPLINK_HWID := 0x3C000101 - CONSOLE := ttyATH0,115200 -endef -TARGET_DEVICES += oolite - -# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) -# UBNT_TYPE e.g. one of (BZ, XM, XW) -# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) -define Device/ubnt-xm - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7552k - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro - UBNT_TYPE := XM - UBNT_BOARD := XM - UBNT_CHIP := ar7240 - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split - IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/ubnt-xw - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7552k - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro - UBNT_TYPE := XW - UBNT_BOARD := XM - UBNT_CHIP := ar934x - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split - IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/ubnt-bz - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7552k - MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro - UBNT_TYPE := BZ - UBNT_BOARD := XM - UBNT_CHIP := ar934x - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split - IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/ubnt-unifiac - DEVICE_PROFILE := UBNT - IMAGE_SIZE := 7744k - MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro - IMAGES := sysupgrade.bin - IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -define Device/rw2458n - $(Device/ubnt-xm) - BOARDNAME := RW2458N -endef - -define Device/ubnt-airrouter - $(Device/ubnt-xm) - BOARDNAME := UBNT-AR -endef - -define Device/ubnt-bullet-m - $(Device/ubnt-xm) - BOARDNAME := UBNT-BM -endef - -define Device/ubnt-rocket-m - $(Device/ubnt-xm) - BOARDNAME := UBNT-RM -endef - -define Device/ubnt-nano-m - $(Device/ubnt-xm) - BOARDNAME := UBNT-NM -endef -TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m - -define Device/ubnt-unifi - $(Device/ubnt-bz) - BOARDNAME := UBNT-UF - DEVICE_PROFILE := UBNT UBNTUNIFI -endef - -define Device/ubnt-unifiac-lite - $(Device/ubnt-unifiac) - DEVICE_PROFILE := UBNT UBNTUNIFIACLITE - BOARDNAME := UBNT-UF-AC-LITE -endef - -define Device/ubnt-unifiac-pro - $(Device/ubnt-unifiac) - DEVICE_PROFILE := UBNT UBNTUNIFIACPRO - BOARDNAME := UBNT-UF-AC-PRO -endef - -define Device/ubnt-unifi-outdoor - $(Device/ubnt-bz) - BOARDNAME := UBNT-U20 - DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR -endef -TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor - -define Device/ubnt-nano-m-xw - $(Device/ubnt-xw) - BOARDNAME := UBNT-NM-XW -endef - -define Device/ubnt-loco-m-xw - $(Device/ubnt-xw) - BOARDNAME := UBNT-LOCO-XW -endef - -define Device/ubnt-rocket-m-xw - $(Device/ubnt-xw) - BOARDNAME := UBNT-RM-XW -endef - -define Device/ubnt-rocket-m-ti - $(Device/ubnt-xw) - BOARDNAME := UBNT-RM-TI - UBNT_TYPE := TI - UBNT_BOARD := XM -endef -TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti - -define Device/ubnt-air-gateway - $(Device/ubnt-xm) - BOARDNAME := UBNT-AGW - UBNT_BOARD := XM - UBNT_TYPE := AirGW - UBNT_CHIP := ar933x - CONSOLE = ttyATH0,115200 -endef -TARGET_DEVICES += ubnt-air-gateway - -define Device/ubnt-air-gateway-pro - $(Device/ubnt-xm) - BOARDNAME := UBNT-AGWP - UBNT_TYPE := AirGWP - UBNT_CHIP := ar934x - CONSOLE = ttyS0,115200 -endef -TARGET_DEVICES += ubnt-air-gateway-pro - -define Device/ubdev01 - $(Device/ubnt-xm) - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro - BOARDNAME := UBNT-UF - UBNT_BOARD := UBDEV01 - UBNT_TYPE := XM - UBNT_CHIP := ar7240 -endef - -TARGET_DEVICES += ubdev01 - -define Device/ubnt-routerstation - IMAGE_SIZE := 16128k - IMAGES := sysupgrade.bin factory.bin - IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage - IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) - KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) -endef - -define Device/ubnt-rs -$(Device/ubnt-routerstation) - BOARDNAME := UBNT-RS - DEVICE_PROFILE := Madwifi UBNT UBNTRS - UBNT_BOARD := RS - UBNT_TYPE := RSx - UBNT_CHIP := ar7100 -endef - -define Device/ubnt-rspro -$(Device/ubnt-routerstation) - BOARDNAME := UBNT-RSPRO - DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO - UBNT_BOARD := RSPRO - UBNT_TYPE := RSPRO - UBNT_CHIP := ar7100pro -endef - -define Device/ubnt-ls-sr71 -$(Device/ubnt-routerstation) - BOARDNAME := UBNT-LS-SR71 - DEVICE_PROFILE := Madwifi UBNT - UBNT_BOARD := LS-SR71 - UBNT_TYPE := LS-SR71 - UBNT_CHIP := ar7100 -endef - -TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71 - -define Device/ubnt-uap-pro - KERNEL_SIZE := 1536k - IMAGE_SIZE := 15744k - MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) - UBNT_TYPE := BZ - UBNT_CHIP := ar934x - BOARDNAME := UAP-PRO - DEVICE_PROFILE := UBNT UAPPRO - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 - IMAGES := sysupgrade.bin factory.bin - IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2 -endef - -define Device/ubnt-unifi-outdoor-plus -$(Device/ubnt-uap-pro) - UBNT_CHIP := ar7240 - BOARDNAME := UBNT-UOP - DEVICE_PROFILE := UBNT -endef - -TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus - -rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1))) - -# $(1): rootfs type. -# $(2): board name. -define imgname -$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1)) -endef - -define rootfs_align -$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1)))))) -endef - -define sysupname -$(call imgname,$(1),$(2))-sysupgrade.bin -endef - -define factoryname -$(call imgname,$(1),$(2))-factory.bin -endef - -COMMA:=, - -define mkcmdline -$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3)) -endef - -define mtdpartsize -$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024))) -endef - -SINGLE_PROFILES:= - -# $(1) : name of image build method to be used, e.g., AthLzma. -# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc. -# $(3) : name of the profile to be defined. -# $(4) : board name. -# $(5)~$(7) : arguments for $(mkcmdline) -# board=$(1) console=$(2),$(3) -# $(8)~$(14): extra arguments. -define SingleProfile - # $(1): action name, e.g. loader, buildkernel, squashfs, etc. - define Image/Build/Profile/$(3) - $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14)) - endef - SINGLE_PROFILES += $(3) -endef - -# $(1), name of the MultiProfile to be added. -# $(2), name of Profiles to be included in the MultiProfile. -define MultiProfile - define Image/Build/Profile/$(1) - $(foreach p,$(2), - $$(call Image/Build/Profile/$p,$$(1)) - ) - endef -endef - -LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) - -VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux -UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage - -# $(1): input file. -# $(2): output file. -# $(3): extra arguments for lzma. -define CompressLzma - $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2) -endef - -define PatchKernel - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" -endef - -define PatchKernel/initramfs - $(call PatchKernel,$(1),$(2),-initramfs) - cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra argumetns for lzma. -# $(4): name suffix, e.g. "-initramfs". -define PatchKernelLzma - cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))" - $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3)) -endef - -define PatchKernelGzip - cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) - $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" - gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz -endef - -ifneq ($(SUBTARGET),mikrotik) -# $(1): compression method of the data. -# $(2): extra arguments. -# $(3): input data file. -# $(4): output file. -define MkuImage - mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ - -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(3) $(4) -endef - -# $(1): board name. -# $(2): kernel command line. -# $(3): extra arguments for lzma. -# $(4): name suffix, e.g. "-initramfs". -# $(5): extra arguments for mkimage. -define MkuImageLzma - $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) - $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) -endef - -define MkuImageLzma/initramfs - $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs) - $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageGzip - $(call PatchKernelGzip,$(1),$(2)) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage) -endef - -define MkuImageGzip/initramfs - $(call PatchKernelGzip,$(1),$(2),-initramfs) - $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin) -endef - -define MkuImageOKLI - $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli) -endef -endif - -# $(1): name of the 1st file. -# $(2): size limit of the 1st file if it is greater than 262144, or -# the erase size of the flash if it is greater than zero and less -# than 262144 -# $(3): name of the 2nd file. -# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise -# it is the size limit of the output file -# $(5): name of the output file. -# $(6): padding size. -define CatFiles - if [ $(2) -eq 0 ]; then \ - filename="$(3)"; fstype=$$$${filename##*\.}; \ - case "$$$${fstype}" in \ - "jffs2-64k") bs=65536;; \ - "jffs2-128k") bs=131072;; \ - "jffs2-256k") bs=262144;; \ - *) bs=`stat -c%s $(1)`;; \ - esac; \ - ( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \ - if [ -n "$(6)" ]; then \ - case "$$$${fstype}" in \ - squashfs*) \ - padjffs2 $(5) $(6); \ - ;; \ - esac; \ - fi; \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - else if [ $(2) -gt 262144 ]; then \ - if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ - echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \ - else if [ `stat -c%s $(3)` -gt $(4) ]; then \ - echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - fi; fi; \ - else \ - ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ - if [ `stat -c%s $(5)` -gt $(4) ]; then \ - echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ - rm -f $(5); \ - fi; \ - fi; fi -endef - -# $(1): rootfs type. -# $(2): board name. -# $(3): kernel image size limit. -# $(4): rootfs image size limit. -# $(5): padding argument for padjffs2. -Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5))) -Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) -Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) - -# $(1): ubinize ini file -# $(2): working directory -# $(3): output file -# $(4): physical erase block size -# $(5): minimum I/O unit size -# $(6): custom options -define ubinize - $(CP) $(1) $(2) - ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) -endef - -# -# Embed lzma-compressed kernel inside lzma-loader. -# -# $(1), suffix of output filename, e.g. generic, lowercase board name, etc. -# $(2), suffix of target file to build, e.g. bin, gz, elf -# $(3), kernel command line to pass from lzma-loader to kernel -# $(4), unused here -# $(5), suffix of kernel filename, e.g. -initramfs, or empty -define Image/BuildLoader - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \ - compile loader.$(2) - -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2) -endef - -# -# Build lzma-loader alone which will search for lzma-compressed kernel identified by -# uImage header with magic "OKLI" at boot time. -# -# $(4), offset into the flash space to start searching uImage magic "OKLI". -# $(5), size of search range starting at $(4). With 0 as the value, uImage -# header is expected to be at precisely $(4) -define Image/BuildLoaderAlone - -rm -rf $(KDIR)/lzma-loader - $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \ - LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ - BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \ - compile loader.$(2) -endef - -define Build/Clean - $(LOADER_MAKE) clean -endef - -alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown) -alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware) -alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro -all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art) -all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro -ap81_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,5120k(rootfs),2688k(kernel),64k(art)ro,7808k@0x50000(firmware) -ap83_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,4096k(rootfs),3648k(kernel),64k(art)ro,7744k@0x60000(firmware) -ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware) -ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware) -ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware) -ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2448k(rootfs),1200k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware) -ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware) -ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware) -ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware) -ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware) -ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) -bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro -cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro -cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro -cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro -cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) -cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) -cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro -cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro -cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro -cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware) -eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro -db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro -dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro -dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro -cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) -cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) -ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art) -ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro -f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) -dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) -dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) -dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro -hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware) -mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware) -mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware) -pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware) -planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro -ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro -uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) -ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro -whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro -wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware) -wpj342_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro -wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro -dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) -wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro -wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro -wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware) -wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro -wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro -wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro -r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) -tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro -wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) -zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) -mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro -mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro -zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) -qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) -yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware) -yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware) - - -define Image/BuildKernel - cp $(KDIR)/vmlinux.elf $(VMLINUX).elf - cp $(KDIR)/vmlinux $(VMLINUX).bin - dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync - dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync - $(call MkuImage,gzip,,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin) - $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin) - cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf - -mkdir -p $(KDIR_TMP) - $(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel) -endef - -define Image/BuildKernel/Initramfs - cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf - cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin - dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync - dd if=$(KDIR)/vmlinux-initramfs.bin.gz of=$(VMLINUX)-initramfs.gz bs=65536 conv=sync - $(call MkuImage,gzip,,$(KDIR)/vmlinux-initramfs.bin.gz,$(UIMAGE)-initramfs-gzip.bin) - $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin) - cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf - $(call Image/Build/Initramfs) -endef - -Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3)) - -define Image/Build/WRT400N - $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/CameoAP94/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4)) - $(call MkuImageLzma,$(2)-fat,$(3) $(5)) -endef - -define Image/Build/CameoAP94 - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - dd if=$(call sysupname,$(1),$(2)); \ - echo -n "$(6)"; \ - ) > $(call imgname,$(1),$(2))-backup-loader.bin; \ - if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \ - echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \ - else \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \ - echo -n "$(7)"; \ - ) > $(call factoryname,$(1),$(2)); \ - fi; \ - fi - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64) - if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \ - echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - "$(KDIR_TMP)/$(2)-fat.bin" \ - "$(KDIR_TMP)/$(2)-fat.dummy" \ - $(call sysupname,$(1),$(2)-fat); \ - fi -endef - -define Image/Build/WZRHP - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4)) - -Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3)) -Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) -Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4)) - - -Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/WHRHPG300N - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - ( \ - echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ - dd if=$(call sysupname,$(1),$(2)); \ - ) > $(call imgname,$(1),$(2))-tftp.bin; \ - buffalo-enc -p $(5) -v 1.99 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(KDIR_TMP)/$(2).enc; \ - buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ - -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ - -i $(KDIR_TMP)/$(2).enc \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -define Image/Build/Cameo - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - factory_size=$$$$(($(fwsize) - $(6))); \ - ( \ - dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \ - echo -n $(5); \ - ) > $(call factoryname,$(1),$(2)); \ - fi -endef - -Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout)) -Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536) -Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout)) - -Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout)) -Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536) -Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout)) - -Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout)) -Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) -Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) - -Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) -Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26) -Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) - -Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) -Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) -Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) -Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) - -Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M)) -Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26) -Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M)) - -define Image/Build/CameoHornet - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - for r in $(7); do \ - [ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \ - [ -z "$$$$r" ] && r="DEF"; \ - mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \ - -K $(8) -I $(fwsize) \ - -k "$(call sysupname,$(1),$(2))" \ - -o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \ - true; \ - done; \ - fi -endef - -Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout)) -Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000) -Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout)) - -Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) -Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) -Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) - -define Image/Build/dLAN - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) - if [ -e "$(call factoryname,$(1),$(2))" ]; then \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ - fi -endef - -Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Ath - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ - fi -endef - -Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4)) -Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4)) - -Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Belkin - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \ - -n "uImage" \ - -i $(KDIR_TMP)/vmlinux-$(2).uImage \ - -o $(KDIR_TMP)/$(2)-uImage; \ - edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \ - -n "rootfs" \ - -i $(KDIR)/root.$(1) \ - -o $(KDIR_TMP)/$(2)-rootfs; \ - ( \ - dd if=$(KDIR_TMP)/$(2)-rootfs; \ - dd if=$(KDIR_TMP)/$(2)-uImage; \ - ) > "$(call factoryname,$(1),$(2))"; \ - fi -endef - -define Image/Build/EnGenius - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) - $(eval kernsize=$(call mtdpartsize,kernel,$(4))) - $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ - mksenaofw -e $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory.dlf \ - -r 0x101 -p $(7) -t 2; \ - fi -endef - -Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - - -define MkuImageHiWiFi - # Field ih_name needs to start with "tw150v1" - mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ - -e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(3) $(4) -endef - -define MkuImageLzmaHiWiFi - $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) - $(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) -endef - -Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4)) -Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) -Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3)) - -define Image/Build/PB4X - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync - -sh $(TOPDIR)/scripts/combined-image.sh \ - "$(call imgname,kernel,$(2)).bin" \ - "$(call imgname,$(1),$(2)-rootfs).bin" \ - $(call sysupname,$(1),$(2)) -endef - - -Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3)) -Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3)) - -define Image/Build/MyLoader - $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024)))) - $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage)) - if [ -e "$(fwimage)" ]; then \ - $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \ - -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \ - $(call imgname,$(1),$(2))-$(5)-factory.img; \ - echo -n "" > $(KDIR_TMP)/empty.bin; \ - sh $(TOPDIR)/scripts/combined-image.sh \ - $(fwimage) $(KDIR_TMP)/empty.bin \ - $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \ - fi -endef - -Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout)) -Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0) - -define Image/Build/Planex/buildkernel - [ -e "$(KDIR)/loader-$(2).gz" ] - $(call MkuImageOKLI,$(2)) - ( \ - dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \ - dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \ - ) > $(KDIR_TMP)/kernel-$(2).bin - $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - -define Image/Build/Planex - $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout))) - $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkplanexfw \ - -B $(2) \ - -v 2.00.00 \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/ALFA - $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6)) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - rm -rf $(KDIR)/$(1); \ - mkdir -p $(KDIR)/$(1); \ - cd $(KDIR)/$(1); \ - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \ - cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \ - $(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \ - ( \ - echo WRM7222C | dd bs=32 count=1 conv=sync; \ - echo -ne '\xfe'; \ - ) >> $(call factoryname,$(1),$(2)); \ - fi -endef - - -Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000) - -define Image/Build/Seama - [ -e "$(KDIR)/loader-$(2).bin" ] - $(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma) - -rm -f $(KDIR_TMP)/image-$(2).tmp - $(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp) - [ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \ - head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \ - $(STAGING_DIR_HOST)/bin/seama \ - -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \ - -m "dev=/dev/mtdblock/1" -m "type=firmware"; \ - $(STAGING_DIR_HOST)/bin/seama \ - -s $(call imgname,$(1),$(2))-factory.bin \ - -m "signature=$(5)" \ - -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \ - tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \ - } - cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp - $(STAGING_DIR_HOST)/bin/seama \ - -i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \ - -m "dev=/dev/mtdblock/1" -m "type=firmware" - $(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2))) -endef - -define Image/Build/Seama/initramfs - $(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs) - $(STAGING_DIR_HOST)/bin/seama \ - -i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \ - -m "dev=/dev/mtdblock/1" -m "type=firmware" - cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin -endef - -Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Senao - mkdir -p $(KDIR_TMP)/$(2)/ - touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2) - -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync - dd if=$(KDIR)/root.$(1) \ - of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync - ( \ - cd $(KDIR_TMP)/$(2)/; \ - $(TAR) -cz -f $(call factoryname,$(1),$(2)) * \ - ) - -rm -rf $(KDIR_TMP)/$(2)/ - -sh $(TOPDIR)/scripts/combined-image.sh \ - $(KDIR_TMP)/vmlinux-$(2).uImage \ - $(KDIR)/root.$(1) \ - $(call sysupname,$(1),$(2)) -endef - -define Image/Build/CyberTAN - echo -n '' > $(KDIR_TMP)/empty.bin - $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ - -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) - -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \ - -i $(KDIR)/image.tmp \ - -o $(call sysupname,$(1),$(2)) - $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \ - -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) - -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \ - -i $(KDIR)/image.tmp \ - -o $(call factoryname,$(1),$(2)) - rm $(KDIR)/image.tmp -endef - -Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000) -Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage) -Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - -Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) - - -define Build/MerakiNAND - -$(STAGING_DIR_HOST)/bin/mkmerakifw \ - -B $(BOARDNAME) -s \ - -i $@ \ - -o $@.new - @mv $@.new $@ -endef - -Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -define Image/Build/Netgear/buildkernel - $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -rm -rf $(KDIR_TMP)/$(2) - mkdir -p $(KDIR_TMP)/$(2)/image - cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage - $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ - $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \ - -noappend -root-owned -be -b 65536 \ - $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) - ( \ - cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \ - dd if=/dev/zero bs=1k count=1 \ - ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 - mkimage -A mips -O linux -T filesystem -C none -M $(5) \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ - -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \ - $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs -endef - -define Image/Build/Netgear - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) - if [ -e $(call sysupname,$(1),$(2)) ]; then \ - for r in $(7) ; do \ - [ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \ - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \ - -i $(call sysupname,$(1),$(2)) \ - -o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \ - done; \ - fi -endef - - -Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) -Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) - -define Image/Build/NetgearLzma - $(eval fwsize=$(call mtdpartsize,firmware,$(4))) - $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) -endef - - -Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) - -# $(1): (empty) -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -define Image/Build/NetgearNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(call PatchKernelLzma,$(2),$(3) $(4),-d20) - dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ - of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ - bs=$$$$(($(kernelsize)-131072-2*64-1)) \ - count=1 conv=sync - $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) - echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage - # create a fake rootfs image - dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 - mkimage -A mips -O linux -T filesystem -C none \ - -a 0xbf070000 -e 0xbf070000 \ - -n 'MIPS OpenWrt fakeroot' \ - -d $(KDIR_TMP)/fakeroot-$(2) \ - -M $(5) \ - $(KDIR_TMP)/fakeroot-$(2).uImage - # append the fake rootfs image to the kernel, it will reside in the last - # erase block of the kernel partition - cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage -endef - - -# $(1): rootfs image suffix -# $(2): Board name (small caps) -# $(3): Kernel board specific cmdline -# $(4): Kernel mtdparts definition -# $(5): U-Boot magic -# $(6): Board name (upper caps) -# $(7): firmware region code (not used yet) -# $(8): DNI Hardware version -# $(9): suffix of the configuration file for ubinize -define Image/Build/NetgearNAND - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs - echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof - $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - $(STAGING_DIR_HOST)/bin/mkdniimg \ - -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \ - -i $(imageraw) \ - -o $(call imgname,ubi,$(2))-factory.img - - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage) -endef - - -ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh - Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) - - define Image/Build/ZyXEL - $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \ - echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \ - else \ - $(STAGING_DIR_HOST)/bin/mkzynfw \ - -B $(4) \ - -b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \ - -r $(call sysupname,$(1),$(2)):0x10000 \ - -o $(call factoryname,$(1),$(2)); \ - fi; fi - endef -endif - -define Device/NBG6616 - BOARDNAME = NBG6616 - KERNEL_SIZE = 2048k - IMAGE_SIZE = 15323k - MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware) - CMDLINE += mem=128M - IMAGES := sysupgrade.bin - KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage - IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) - # We cannot currently build a factory image. It is the sysupgrade image - # prefixed with a header (which is actually written into the MTD device). - # The header is 2kiB and is filled with 0xff. The format seems to be: - # 2 bytes: 0x0000 - # 2 bytes: checksum of the data partition (big endian) - # 4 bytes: length of the contained image file (big endian) - # 32 bytes: Firmware Version string (NUL terminated, 0xff padded) - # 2 bytes: 0x0000 - # 2 bytes: checksum over the header partition (big endian) - # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded) - # rest: 0xff padding - # - # The checksums are calculated by adding up all bytes and if a 16bit - # overflow occurs, one is added and the sum is masked to 16 bit: - # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff }; - # Should the file have an odd number of bytes then the byte len-0x800 is - # used additionally. - # The checksum for the header is calcualted over the first 2048 bytes with - # the firmware checksum as the placeholder during calculation. - # - # The header is padded with 0xff to the erase block size of the device. -endef - -TARGET_DEVICES += NBG6616 - -define Image/Build/ZyXELNAND/buildkernel - $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) - $(call MkuImageLzma,$(2),$(3) $(5) $(6)) - mkdir -p $(KDIR_TMP)/$(2)/image/boot - cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage - $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ - --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \ - -o $(KDIR_TMP)/$(2)-kernel.jffs2 \ - -d $(KDIR_TMP)/$(2)/image \ - 2>&1 1>/dev/null | awk '/^.+$$$$/' - -rm -rf $(KDIR_TMP)/$(2) -endef - -define Image/Build/ZyXELNAND - if [ "$(1)" != "squashfs" ]; then \ - echo Only squashfs is supported; \ - return 0; \ - fi - $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) - $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) - $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) - $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img - $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) - ( \ - dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \ - dd if=$(KDIR_TMP)/$(2)-root.ubi \ - ) > $(imageraw) - dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \ - bs=128k conv=sync - $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2) -endef - - -Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2)) - -define Image/Build/OpenMesh - -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \ - "$(4)" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" \ - "$(KDIR)/root.$(1)" - -sh $(TOPDIR)/scripts/combined-ext-image.sh \ - "$(4)" "$(call factoryname,$(1),$(2))" \ - "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ - "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ - "$(KDIR)/root.$(1)" "rootfs" -endef - - -Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) -Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) - -define Image/Build/Zcomax - $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992) - if [ -e "$(call sysupname,$(1),$(2))" ]; then \ - $(STAGING_DIR_HOST)/bin/mkzcfw \ - -B $(2) \ - -k $(KDIR_TMP)/vmlinux-$(2).uImage \ - -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \ - -o $(call imgname,$(1),$(2))-factory.img; \ - fi -endef - - -# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc. -# $(2): jffs2 blocksize. -define Jffs2Template - define Image/Build/Template/$(1)/jffs2-$(2) - $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef -endef - -# $(1): template name to be defined. -# $(2): squashfs suffix to be used. -# $(3): jffs2 suffix to be used. -define BuildTemplate - # $(1) : name of build method. - # $(2) : board name. - # $(3) : kernel command line. - # $(4)~$(8): extra arguments. - define Image/Build/Template/$(1)/initramfs - $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/loader - $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/buildkernel - $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - define Image/Build/Template/$(1)/squashfs - $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) - endef - $(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs))))) -endef - -$(eval $(call BuildTemplate,squashfs-only)) -$(eval $(call BuildTemplate,64k,-64k,64k)) -$(eval $(call BuildTemplate,64kraw,-raw,64k)) -$(eval $(call BuildTemplate,64kraw-nojffs,-raw)) -$(eval $(call BuildTemplate,128k,,128k)) -$(eval $(call BuildTemplate,128kraw,-raw,128k)) -$(eval $(call BuildTemplate,256k,,256k)) -$(eval $(call BuildTemplate,all,,64k 128k 256k)) - -ifeq ($(SUBTARGET),generic) -define Device/c-55 - BOARDNAME = C-55 - KERNEL_SIZE = 2048k - IMAGE_SIZE = 15872k - MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware) - IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) -endef - -TARGET_DEVICES += c-55 - -$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2)) -$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image)) -$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image)) - -$(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage)) - -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144)) -$(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage)) -$(eval $(call SingleProfile,AthLzma,64k,WPJ342_16M,wpj342-16M,WPJ342,ttyS0,115200,$$(wpj342_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536)) -$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage)) -$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage)) - -$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) - -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00")) -$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02")) -$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01")) - -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00")) -$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05")) - -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00")) -$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00")) - -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05")) -$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02")) - -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) -$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) -$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) - -$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) -$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00")) - -$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) -$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) - -$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA")) - -$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) - -$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) - -$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) -$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) -$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) - -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536)) -$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536)) - -$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) -$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) -$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71)) - -$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage)) - -$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M)) -$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M)) -$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M)) -$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) - -$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32)) -$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",)) -$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,)) - -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900)) -$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750)) - -$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200)) -$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200)) - -$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200)) -$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) - -$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,65536,16187392)) -$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,65536,16187392)) - -$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,65536,16121856)) - -$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) - -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN)) -$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N)) - -$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200)) - -$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) -$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) - -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) -$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) - -$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N)) - -$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M AP121_8M AP121_16M)) -$(eval $(call MultiProfile,AP136,AP136_010 AP136_020)) -$(eval $(call MultiProfile,AP143,AP143_8M AP143_16M)) -$(eval $(call MultiProfile,AP147,AP147_010)) -$(eval $(call MultiProfile,AP152,AP152_16M)) -$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3)) -$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M)) -$(eval $(call MultiProfile,OPENMESH,OM2P OM5P OM5PAC MR600 MR900 MR1750)) -$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY)) -$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M)) -$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R)) -$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC)) -$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M)) -$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M)) -$(eval $(call MultiProfile,WPJ342,WPJ342_16M)) -$(eval $(call MultiProfile,WPJ344,WPJ344_16M)) -$(eval $(call MultiProfile,WPJ531,WPJ531_16M)) -$(eval $(call MultiProfile,WPJ558,WPJ558_16M)) -$(eval $(call MultiProfile,Yun,YUN_16M YUN_8M)) - -$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES))) -$(eval $(call MultiProfile,Madwifi,EAP7660D WP543)) -endif # ifeq ($(SUBTARGET),generic) - -ifeq ($(SUBTARGET),nand) - -define Device/mr18 - BOARDNAME = MR18 - BLOCKSIZE := 64k - CONSOLE = ttyS0,115200 - MTDPARTS = ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro - IMAGES := sysupgrade.tar - KERNEL := kernel-bin | patch-cmdline | MerakiNAND - KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND - IMAGE/sysupgrade.tar := sysupgrade-nand -endef -TARGET_DEVICES += mr18 - -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300)) -$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300)) - -$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M)) - -$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1)) -endif # ifeq ($(SUBTARGET),nand) - - -$(eval $(call MultiProfile,Default,$(SINGLE_PROFILES))) - -define Image/Build/squashfs - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw - cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k - $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64 - cp $(KDIR)/root.squashfs-64k $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-64k - $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -endef - -define Image/Build/jffs2 - dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync -endef - -define Image/Build/Initramfs - $(call Image/Build/Profile/$(IMAGE_PROFILE),initramfs) -endef - -define Image/Prepare - gzip -9n -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz - $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) -ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) - gzip -9n -c $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs.bin.gz - $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) - $(call Image/BuildLoader,generic,elf,,,-initramfs) -endif - $(call Image/BuildLoader,generic,elf) - $(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader) -endef - -# $(1): filesystem type. -define Image/Build - $(call Image/Build/$(call rootfs_type,$(1)),$(1)) - $(call Image/Build/Profile/$(IMAGE_PROFILE),$(1)) -endef - $(eval $(call BuildImage)) diff --git a/target/linux/ar71xx/image/generic.mk b/target/linux/ar71xx/image/generic.mk new file mode 100644 index 0000000000..ca79f98c97 --- /dev/null +++ b/target/linux/ar71xx/image/generic.mk @@ -0,0 +1,344 @@ +define Device/bsb + BOARDNAME = BSB + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:128k(u-boot)ro,64k(u-boot-env)ro,16128k(firmware),64k(art)ro +endef +TARGET_DEVICES += bsb + +define Device/carambola2 + BOARDNAME = CARAMBOLA2 + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += carambola2 + +define Device/cf-e316n-v2 + BOARDNAME = CF-E316N-V2 + IMAGE_SIZE = 16192k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:64k(u-boot)ro,64k(art)ro,16192k(firmware),64k(nvram)ro +endef +TARGET_DEVICES += cf-e316n-v2 + +define Device/weio + BOARDNAME = WEIO + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += weio + +define Device/gl-ar150 + BOARDNAME = GL-AR150 + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += gl-ar150 + +define Device/gl-ar300 + BOARDNAME = GL-AR300 + IMAGE_SIZE = 16000k + CONSOLE = ttyS0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += gl-ar300 + +define Device/gl-domino + BOARDNAME = DOMINO + IMAGE_SIZE = 16000k + CONSOLE = ttyATH0,115200 + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,16000k(firmware),64k(art)ro +endef +TARGET_DEVICES += gl-domino + +define Device/wndr3700 + BOARDNAME = WNDR3700 + NETGEAR_KERNEL_MAGIC = 0x33373030 + NETGEAR_BOARD_ID = WNDR3700 + IMAGE_SIZE = 7680k + MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro + IMAGES := sysupgrade.bin factory.img factory-NA.img + KERNEL := kernel-bin | patch-cmdline | lzma -d20 | netgear-uImage lzma + IMAGE/default = append-kernel $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs + IMAGE/sysupgrade.bin = $$(IMAGE/default) | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.img = $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE) + IMAGE/factory-NA.img = $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE) +endef + +define Device/wndr3700v2 +$(Device/wndr3700) + NETGEAR_BOARD_ID = WNDR3700v2 + NETGEAR_KERNEL_MAGIC = 0x33373031 + NETGEAR_HW_ID = 29763654+16+64 + IMAGE_SIZE = 15872k + MTDPARTS = spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro + IMAGES := sysupgrade.bin factory.img +endef + +define Device/wndr3800 +$(Device/wndr3700v2) + NETGEAR_BOARD_ID = WNDR3800 + NETGEAR_HW_ID = 29763654+16+128 +endef + +define Device/wndr3800ch +$(Device/wndr3800) + NETGEAR_BOARD_ID = WNDR3800CH +endef + +define Device/wndrmac +$(Device/wndr3700v2) + NETGEAR_BOARD_ID = WNDRMAC +endef + +define Device/wndrmacv2 +$(Device/wndr3800) + NETGEAR_BOARD_ID = WNDRMACv2 +endef + +TARGET_DEVICES += wndr3700 wndr3700v2 wndr3800 wndr3800ch wndrmac wndrmacv2 + +define Device/cap324 + BOARDNAME := CAP324 + DEVICE_PROFILE := CAP324 + IMAGE_SIZE = 15296k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,15296k(firmware),640k(certs),64k(nvram),64k(art) +endef + +TARGET_DEVICES += cap324 + +define Device/cap324-nocloud + BOARDNAME := CAP324 + DEVICE_PROFILE := CAP324 + IMAGE_SIZE = 16000k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,16000k(firmware),64k(art) +endef + +TARGET_DEVICES += cap324-nocloud + +define Device/cr3000 + BOARDNAME := CR3000 + DEVICE_PROFILE := CR3000 + IMAGE_SIZE = 7104k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art) +endef + +TARGET_DEVICES += cr3000 + +define Device/cr3000-nocloud + BOARDNAME := CR3000 + DEVICE_PROFILE := CR3000 + IMAGE_SIZE = 7808k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art) +endef + +TARGET_DEVICES += cr3000-nocloud + +define Device/cr5000 + BOARDNAME := CR5000 + DEVICE_PROFILE := CR5000 + IMAGE_SIZE = 7104k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7104k(firmware),640k(certs),64k(nvram),64k(art) +endef + +TARGET_DEVICES += cr5000 + +define Device/cr5000-nocloud + BOARDNAME := CR5000 + DEVICE_PROFILE := CR5000 + IMAGE_SIZE = 7808k + MTDPARTS = spi0.0:256k(u-boot),64k(u-boot-env)ro,7808k(firmware),64k(art) +endef + +TARGET_DEVICES += cr5000-nocloud + +define Device/antminer-s1 + $(Device/tplink-8mlzma) + BOARDNAME := ANTMINER-S1 + DEVICE_PROFILE := ANTMINERS1 + TPLINK_HWID := 0x04440101 + CONSOLE := ttyATH0,115200 +endef + +define Device/antminer-s3 + $(Device/tplink-8mlzma) + BOARDNAME := ANTMINER-S3 + DEVICE_PROFILE := ANTMINERS3 + TPLINK_HWID := 0x04440301 + CONSOLE := ttyATH0,115200 +endef + +define Device/antrouter-r1 + $(Device/tplink-8mlzma) + BOARDNAME := ANTROUTER-R1 + DEVICE_PROFILE := ANTROUTERR1 + TPLINK_HWID := 0x44440101 + CONSOLE := ttyATH0,115200 +endef + +define Device/el-m150 + $(Device/tplink-8mlzma) + BOARDNAME := EL-M150 + DEVICE_PROFILE := ELM150 + TPLINK_HWID := 0x01500101 + CONSOLE := ttyATH0,115200 +endef + +define Device/el-mini + $(Device/tplink-8mlzma) + BOARDNAME := EL-MINI + DEVICE_PROFILE := ELMINI + TPLINK_HWID := 0x01530001 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += antminer-s1 antminer-s3 antrouter-r1 el-m150 el-mini + +define Device/gl-inet-6408A-v1 + $(Device/tplink-8mlzma) + BOARDNAME := GL-INET + DEVICE_PROFILE := GLINET + TPLINK_HWID := 0x08000001 + CONSOLE := ttyATH0,115200 +endef + +define Device/gl-inet-6416A-v1 + $(Device/tplink-16mlzma) + BOARDNAME := GL-INET + DEVICE_PROFILE := GLINET + TPLINK_HWID := 0x08000001 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += gl-inet-6408A-v1 gl-inet-6416A-v1 + +define Device/rnx-n360rt + $(Device/tplink-4m) + BOARDNAME := TL-WR941ND + DEVICE_PROFILE := RNXN360RT + TPLINK_HWID := 0x09410002 + TPLINK_HWREV := 0x00420001 +endef +TARGET_DEVICES += rnx-n360rt + +define Device/mc-mac1200r + $(Device/tplink-8mlzma) + BOARDNAME := MC-MAC1200R + DEVICE_PROFILE := MAC1200R + TPLINK_HWID := 0x12000001 +endef +TARGET_DEVICES += mc-mac1200r + +define Device/minibox-v1 + $(Device/tplink-16mlzma) + BOARDNAME := MINIBOX-V1 + DEVICE_PROFILE := MINIBOXV1 + TPLINK_HWID := 0x3C000201 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += minibox-v1 + +define Device/omy-g1 + $(Device/tplink-16mlzma) + BOARDNAME := OMY-G1 + DEVICE_PROFILE := OMYG1 + TPLINK_HWID := 0x06660101 +endef + +define Device/omy-x1 + $(Device/tplink-8mlzma) + BOARDNAME := OMY-X1 + DEVICE_PROFILE := OMYX1 + TPLINK_HWID := 0x06660201 +endef +TARGET_DEVICES += omy-g1 omy-x1 + +define Device/onion-omega + $(Device/tplink-16mlzma) + BOARDNAME := ONION-OMEGA + DEVICE_PROFILE := OMEGA + TPLINK_HWID := 0x04700001 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += onion-omega + +define Device/smart-300 + $(Device/tplink-8mlzma) + BOARDNAME := SMART-300 + DEVICE_PROFILE := SMART-300 + TPLINK_HWID := 0x93410001 +endef +TARGET_DEVICES += smart-300 + +define Device/som9331 + $(Device/tplink-8mlzma) + BOARDNAME := SOM9331 + DEVICE_PROFILE := SOM9331 + TPLINK_HWID := 0x04800054 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += som9331 + +define Device/tellstick-znet-lite + $(Device/tplink-16mlzma) + BOARDNAME := TELLSTICK-ZNET-LITE + DEVICE_PROFILE := TELLSTICKZNETLITE + TPLINK_HWID := 0x00726001 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += tellstick-znet-lite + +define Device/oolite + $(Device/tplink-16mlzma) + BOARDNAME := GS-OOLITE + DEVICE_PROFILE := OOLITE + TPLINK_HWID := 0x3C000101 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += oolite + + +define Device/NBG6616 + BOARDNAME = NBG6616 + KERNEL_SIZE = 2048k + IMAGE_SIZE = 15323k + MTDPARTS = spi0.0:192k(u-boot)ro,64k(env)ro,64k(RFdata)ro,384k(zyxel_rfsd),384k(romd),64k(header),2048k(kernel),13184k(rootfs),15232k@0x120000(firmware) + CMDLINE += mem=128M + IMAGES := sysupgrade.bin + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 boot/vmlinux.lzma.uImage + IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + # We cannot currently build a factory image. It is the sysupgrade image + # prefixed with a header (which is actually written into the MTD device). + # The header is 2kiB and is filled with 0xff. The format seems to be: + # 2 bytes: 0x0000 + # 2 bytes: checksum of the data partition (big endian) + # 4 bytes: length of the contained image file (big endian) + # 32 bytes: Firmware Version string (NUL terminated, 0xff padded) + # 2 bytes: 0x0000 + # 2 bytes: checksum over the header partition (big endian) + # 32 bytes: Model (e.g. "NBG6616", NUL termiated, 0xff padded) + # rest: 0xff padding + # + # The checksums are calculated by adding up all bytes and if a 16bit + # overflow occurs, one is added and the sum is masked to 16 bit: + # csum = csum + databyte; if (csum > 0xffff) { csum += 1; csum &= 0xffff }; + # Should the file have an odd number of bytes then the byte len-0x800 is + # used additionally. + # The checksum for the header is calcualted over the first 2048 bytes with + # the firmware checksum as the placeholder during calculation. + # + # The header is padded with 0xff to the erase block size of the device. +endef + +TARGET_DEVICES += NBG6616 + +define Device/c-55 + BOARDNAME = C-55 + KERNEL_SIZE = 2048k + IMAGE_SIZE = 15872k + MTDPARTS = spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,2048k(kernel),13824k(rootfs),13824k(opt)ro,2624k(failsafe)ro,64k(art)ro,15872k@0x60000(firmware) + IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +TARGET_DEVICES += c-55 diff --git a/target/linux/ar71xx/image/legacy.mk b/target/linux/ar71xx/image/legacy.mk new file mode 100644 index 0000000000..12e2f55463 --- /dev/null +++ b/target/linux/ar71xx/image/legacy.mk @@ -0,0 +1,1231 @@ +rootfs_type=$(patsubst jffs2-%,jffs2,$(patsubst squashfs-%,squashfs,$(1))) + +# $(1): rootfs type. +# $(2): board name. +define imgname +$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(call rootfs_type,$(1)) +endef + +define rootfs_align +$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1)))))) +endef + +define sysupname +$(call imgname,$(1),$(2))-sysupgrade.bin +endef + +define factoryname +$(call imgname,$(1),$(2))-factory.bin +endef + +COMMA:=, + +define mkcmdline +$(if $(1),board=$(1) )$(if $(2),console=$(2)$(COMMA)$(3)) +endef + +define mtdpartsize +$(shell sz=`echo '$(2)' | sed -ne 's/.*[:$(COMMA)]\([0-9]*\)k[@]*[0-9a-zx]*($(1)).*/\1/p'`; [ -n "$$sz" ] && echo $$(($$sz * 1024))) +endef + +SINGLE_PROFILES:= + +# $(1) : name of image build method to be used, e.g., AthLzma. +# $(2) : name of the build template to be used, e.g. 64k, 64kraw, 128k, etc. +# $(3) : name of the profile to be defined. +# $(4) : board name. +# $(5)~$(7) : arguments for $(mkcmdline) +# board=$(1) console=$(2),$(3) +# $(8)~$(14): extra arguments. +define SingleProfile + # $(1): action name, e.g. loader, buildkernel, squashfs, etc. + define Image/Build/Profile/$(3) + $$(call Image/Build/Template/$(2)/$$(1),$(1),$(4),$$(call mkcmdline,$(5),$(6),$(7)),$(8),$(9),$(10),$(11),$(12),$(13),$(14)) + endef + SINGLE_PROFILES += $(3) +endef + +# $(1), name of the MultiProfile to be added. +# $(2), name of Profiles to be included in the MultiProfile. +define MultiProfile + define Image/Build/Profile/$(1) + $(foreach p,$(2), + $$(call Image/Build/Profile/$p,$$(1)) + ) + endef +endef + +LOADER_MAKE := $(NO_TRACE_MAKE) -C lzma-loader KDIR=$(KDIR) + +VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux +UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage + +# $(1): input file. +# $(2): output file. +# $(3): extra arguments for lzma. +define CompressLzma + $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(3) $(2) +endef + +define PatchKernel + cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" +endef + +define PatchKernel/initramfs + $(call PatchKernel,$(1),$(2),-initramfs) + cp $(KDIR_TMP)/vmlinux-initramfs-$(1) $(call imgname,initramfs,$(1)).bin +endef + +# $(1): board name. +# $(2): kernel command line. +# $(3): extra argumetns for lzma. +# $(4): name suffix, e.g. "-initramfs". +define PatchKernelLzma + cp $(KDIR)/vmlinux$(4) $(KDIR_TMP)/vmlinux$(4)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(4)-$(1) "$(strip $(2))" + $(call CompressLzma,$(KDIR_TMP)/vmlinux$(4)-$(1),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(3)) +endef + +define PatchKernelGzip + cp $(KDIR)/vmlinux$(3) $(KDIR_TMP)/vmlinux$(3)-$(1) + $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR_TMP)/vmlinux$(3)-$(1) "$(strip $(2))" + gzip -9n -c $(KDIR_TMP)/vmlinux$(3)-$(1) > $(KDIR_TMP)/vmlinux$(3)-$(1).bin.gz +endef + +ifneq ($(SUBTARGET),mikrotik) +# $(1): compression method of the data. +# $(2): extra arguments. +# $(3): input data file. +# $(4): output file. +define MkuImage + mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ + -e 0x80060000 -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ + -d $(3) $(4) +endef + +# $(1): board name. +# $(2): kernel command line. +# $(3): extra arguments for lzma. +# $(4): name suffix, e.g. "-initramfs". +# $(5): extra arguments for mkimage. +define MkuImageLzma + $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) + $(call MkuImage,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) +endef + +define MkuImageLzma/initramfs + $(call PatchKernelLzma,$(1),$(2),$(3),-initramfs) + $(call MkuImage,lzma,$(4),$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.lzma,$(call imgname,initramfs,$(1))-uImage.bin) +endef + +define MkuImageGzip + $(call PatchKernelGzip,$(1),$(2)) + $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-$(1).bin.gz,$(KDIR_TMP)/vmlinux-$(1).uImage) +endef + +define MkuImageGzip/initramfs + $(call PatchKernelGzip,$(1),$(2),-initramfs) + $(call MkuImage,gzip,,$(KDIR_TMP)/vmlinux-initramfs-$(1).bin.gz,$(call imgname,initramfs,$(1))-uImage.bin) +endef + +define MkuImageOKLI + $(call MkuImage,lzma,-M 0x4f4b4c49,$(KDIR)/vmlinux.bin.lzma,$(KDIR_TMP)/vmlinux-$(1).okli) +endef +endif + +# $(1): name of the 1st file. +# $(2): size limit of the 1st file if it is greater than 262144, or +# the erase size of the flash if it is greater than zero and less +# than 262144 +# $(3): name of the 2nd file. +# $(4): size limit of the 2nd file if $(2) is greater than 262144, otherwise +# it is the size limit of the output file +# $(5): name of the output file. +# $(6): padding size. +define CatFiles + if [ $(2) -eq 0 ]; then \ + filename="$(3)"; fstype=$$$${filename##*\.}; \ + case "$$$${fstype}" in \ + "jffs2-64k") bs=65536;; \ + "jffs2-128k") bs=131072;; \ + "jffs2-256k") bs=262144;; \ + *) bs=`stat -c%s $(1)`;; \ + esac; \ + ( dd if=$(1) bs=$$$${bs} conv=sync; cat $(3) ) > $(5); \ + if [ -n "$(6)" ]; then \ + case "$$$${fstype}" in \ + squashfs*) \ + padjffs2 $(5) $(6); \ + ;; \ + esac; \ + fi; \ + if [ `stat -c%s $(5)` -gt $(4) ]; then \ + echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ + rm -f $(5); \ + fi; \ + else if [ $(2) -gt 262144 ]; then \ + if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ + echo "Warning: $(1) is too big (> $(2) bytes)" >&2; \ + else if [ `stat -c%s $(3)` -gt $(4) ]; then \ + echo "Warning: $(3) is too big (> $(4) bytes)" >&2; \ + else \ + ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ + fi; fi; \ + else \ + ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ + if [ `stat -c%s $(5)` -gt $(4) ]; then \ + echo "Warning: $(5) is too big (> $(4) bytes)" >&2; \ + rm -f $(5); \ + fi; \ + fi; fi +endef + +# $(1): rootfs type. +# $(2): board name. +# $(3): kernel image size limit. +# $(4): rootfs image size limit. +# $(5): padding argument for padjffs2. +Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(5))) +Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5)) +Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2))) + +# $(1): ubinize ini file +# $(2): working directory +# $(3): output file +# $(4): physical erase block size +# $(5): minimum I/O unit size +# $(6): custom options +define ubinize + $(CP) $(1) $(2) + ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1)) +endef + +# +# Embed lzma-compressed kernel inside lzma-loader. +# +# $(1), suffix of output filename, e.g. generic, lowercase board name, etc. +# $(2), suffix of target file to build, e.g. bin, gz, elf +# $(3), kernel command line to pass from lzma-loader to kernel +# $(4), unused here +# $(5), suffix of kernel filename, e.g. -initramfs, or empty +define Image/BuildLoader + -rm -rf $(KDIR)/lzma-loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + LOADER_DATA="$(KDIR)/vmlinux$(5).bin.lzma" BOARD="$(1)" \ + compile loader.$(2) + -$(CP) $(KDIR)/loader-$(1).$(2) $(KDIR)/loader-$(1)$(5).$(2) +endef + +# +# Build lzma-loader alone which will search for lzma-compressed kernel identified by +# uImage header with magic "OKLI" at boot time. +# +# $(4), offset into the flash space to start searching uImage magic "OKLI". +# $(5), size of search range starting at $(4). With 0 as the value, uImage +# header is expected to be at precisely $(4) +define Image/BuildLoaderAlone + -rm -rf $(KDIR)/lzma-loader + $(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)" \ + LZMA_TEXT_START=0x80a00000 LOADADDR=0x80060000 \ + BOARD="$(1)" FLASH_OFFS=$(4) FLASH_MAX=$(5) \ + compile loader.$(2) +endef + +define Build/Clean + $(LOADER_MAKE) clean +endef + +alfa_ap120c_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,13312k(rootfs),1536k(kernel),1152k(unknown)ro,64k(art)ro;spi0.1:-(unknown) +alfa_ap96_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13312k(rootfs),2048k(kernel),512k(caldata)ro,15360k@0x80000(firmware) +alfa_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +alfa_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,15936k(firmware),64k(nvram),64k(art)ro +all0258n_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),6272k(firmware),1536k(failsafe),64k(art) +all0315n_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env),13568k(firmware),2048k(failsafe),256k(art)ro +ap81_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,5120k(rootfs),2688k(kernel),64k(art)ro,7808k@0x50000(firmware) +ap83_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,128k(u-boot-env)ro,4096k(rootfs),3648k(kernel),64k(art)ro,7744k@0x60000(firmware) +ap96_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1728k(kernel),64k(art)ro,7872k@0x40000(firmware) +ap113_mtd_layout=mtdparts=spi0.0:64k(u-boot),3008k(rootfs),896k(uImage),64k(NVRAM),64k(ART),3904k@0x10000(firmware) +ap121_mtdlayout_2M=mtdparts=spi0.0:64k(u-boot)ro,1216k(rootfs),704k(kernel),64k(art)ro,1920k@0x10000(firmware) +ap121_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2448k(rootfs),1200k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware) +ap121_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6144k(rootfs),1600k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +ap121_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,10944k(rootfs),4992k(kernel),64k(nvram),64k(art)ro,15936k@0x50000(firmware) +ap132_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),6400k(rootfs),64k(art),7808k@0x50000(firmware) +ap135_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +ap136_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(mib0),64k(art)ro,7744k@0x50000(firmware) +ap143_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1472k(kernel),64k(art)ro,7744k@0x50000(firmware) +ap143_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +ap147_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art),16000k@0x50000(firmware) +ap152_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14528k(rootfs),1472k(kernel),64k(art)ro,16000k@0x50000(firmware) +bxu2000n2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),8448k(rootfs),6016k(user),64k(cfg),64k(oem),64k(art)ro +cameo_ap81_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(config)ro,3840k(firmware),64k(art)ro +cameo_ap91_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3712k(firmware),64k(mac)ro,64k(art)ro +cameo_ap99_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,3520k(firmware),64k(mac)ro,192k(lp)ro,64k(art)ro +cameo_ap121_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,192k(language)ro,3648k(firmware) +cameo_ap121_mtdlayout_8M=mtdparts=spi0.0:64k(u-boot)ro,64k(art)ro,64k(mac)ro,64k(nvram)ro,256k(language)ro,7680k@0x80000(firmware) +cameo_ap123_mtdlayout_4M=mtdparts=spi0.0:64k(u-boot)ro,64k(nvram)ro,3712k(firmware),192k(lang)ro,64k(art)ro +cameo_db120_mtdlayout=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,15936k(firmware),192k(lang)ro,64k(mac)ro,64k(art)ro +cameo_db120_mtdlayout_8M=mtdparts=spi0.0:64k(uboot)ro,64k(nvram)ro,7872k(firmware),128k(lang)ro,64k(art)ro +cap4200ag_mtdlayout=mtdparts=spi0.0:256k(u-boot),64k(u-boot-env),320k(custom)ro,1536k(kernel),12096k(rootfs),2048k(failsafe),64k(art),13632k@0xa0000(firmware) +eap300v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),320k(custom),13632k(firmware),2048k(failsafe),64k(art)ro +db120_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +dgl_5500_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro +dlan_hotspot_mtdlayout=mtdparts=spi0.0:128k(u-boot)ro,64k(Config1)ro,64k(Config2)ro,7872k@0x40000(firmware),64k(art)ro +dlan_pro_500_wp_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,7680k@0x70000(firmware),64k(art)ro +dlan_pro_1200_ac_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(Config1)ro,64k(Config2)ro,15872k@0x70000(firmware),64k(art)ro +cameo_ap94_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,1600k(unknown)ro,64k@0x7f0000(caldata_copy) +cameo_ap94_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7808k(firmware),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) +esr900_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +esr1750_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +epg5000_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),13248k(rootfs),1024k(manufacture)ro,64k(backup)ro,320k(storage)ro,64k(caldata)ro,14656k@0x40000(firmware) +ew-dorin_mtdlayout_4M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),3712k(firmware),64k(art) +ew-dorin_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),16000k(firmware),64k(art)ro +f9k1115v2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),14464k(rootfs),1408k(kernel),64k(nvram)ro,64k(envram)ro,64k(art)ro,15872k@0x50000(firmware) +dlrtdev_mtdlayout=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,6208k(firmware),64k(caldata)ro,640k(certs),960k(unknown)ro,64k@0x7f0000(caldata_copy) +dlrtdev_mtdlayout_fat=mtdparts=spi0.0:256k(uboot)ro,64k(config)ro,7168k(firmware),640k(certs),64k(caldata)ro,64k@0x660000(caldata_orig),6208k@0x50000(firmware_orig) +dragino2_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,16000k(firmware),64k(config)ro,64k(art)ro +hiwifi_hc6361_mtdlayout=mtdparts=spi0.0:64k(u-boot)ro,64k(bdinfo)ro,1280k(kernel),14848k(rootfs),64k(backup)ro,64k(art)ro,16128k@0x20000(firmware) +mr12_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware) +mr16_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,256k(u-boot-env)ro,13440k(rootfs),2304k(kernel),128k(art)ro,15744k@0x80000(firmware) +pb92_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,2752k(rootfs),896k(kernel),64k(nvram),64k(art)ro,3648k@0x50000(firmware) +planex_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),128k(art)ro +ubntxm_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro +uap_pro_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) +ubdev_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro +whrhpg300n_mtdlayout=mtdparts=spi0.0:248k(u-boot)ro,8k(u-boot-env)ro,3712k(firmware),64k(art)ro +wlr8100_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,1408k(kernel),14080k(rootfs),192k(unknown)ro,64k(art)ro,384k(unknown2)ro,15488k@0x40000(firmware) +wpj342_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro +wpj344_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro +dr344_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6336k(rootfs),1408k(kernel),64k(nvram),64k(art)ro,7744k@0x50000(firmware) +wpj531_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro +wpj558_mtdlayout_16M=mtdparts=spi0.0:192k(u-boot)ro,16128k(firmware),64k(art)ro +wndap360_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1728k(kernel),6016k(rootfs),64k(nvram)ro,64k(art)ro,7744k@0x50000(firmware) +wnr2200_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7808k(firmware),64k(art)ro +wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro +wnr2000v4_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(u-boot-env)ro,3776k(firmware),64k(art)ro +r6100_mtdlayout=mtdparts=ar934x-nfc:128k(u-boot)ro,256k(caldata),256k(caldata-backup),512k(config),512k(pot),2048k(kernel),122240k(ubi),25600k@0x1a0000(firmware),2048k(language),3072k(traffic_meter) +tew823dru_mtdlayout=mtdparts=spi0.0:192k(u-boot)ro,64k(nvram)ro,15296k(firmware),192k(lang)ro,512k(my-dlink)ro,64k(mac)ro,64k(art)ro +wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubi),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) +zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware) +mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro +mynet_rext_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,7808k(firmware),64k(nvram)ro,64k(ART)ro +zyx_nbg6716_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(env)ro,64k(RFdata)ro,-(nbu);ar934x-nfc:2048k(zyxel_rfsd),2048k(romd),1024k(header),2048k(kernel),-(ubi) +qihoo_c301_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env),64k(devdata),64k(devconf),15744k(firmware),64k(warm_start),64k(action_image_config),64k(radiocfg)ro;spi0.1:15360k(upgrade2),1024k(privatedata) +yun_mtdlayout_8M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6464k(rootfs),1280k(kernel),64k(nvram),64k(art),7744k@0x50000(firmware) +yun_mtdlayout_16M=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,14656k(rootfs),1280k(kernel),64k(nvram),64k(art),15936k@0x50000(firmware) +wrtnode2q_mtdlayout=mtdparts=spi0.0:192k(u-boot),64k(u-boot-env),64k(art),1472k(kernel),14592k(rootfs),16064k@0x50000(firmware),16384k@0x0(fullflash) + +define Image/BuildKernel + cp $(KDIR)/vmlinux.elf $(VMLINUX).elf + cp $(KDIR)/vmlinux $(VMLINUX).bin + dd if=$(KDIR)/vmlinux.bin.lzma of=$(VMLINUX).lzma bs=65536 conv=sync + dd if=$(KDIR)/vmlinux.bin.gz of=$(VMLINUX).gz bs=65536 conv=sync + $(call MkuImage,gzip,,$(KDIR)/vmlinux.bin.gz,$(UIMAGE)-gzip.bin) + $(call MkuImage,lzma,,$(KDIR)/vmlinux.bin.lzma,$(UIMAGE)-lzma.bin) + cp $(KDIR)/loader-generic.elf $(VMLINUX)-lzma.elf + -mkdir -p $(KDIR_TMP) + $(call Image/Build/Profile/$(IMAGE_PROFILE),buildkernel) +endef + +define Image/BuildKernel/Initramfs + cp $(KDIR)/vmlinux-initramfs.elf $(VMLINUX)-initramfs.elf + cp $(KDIR)/vmlinux-initramfs $(VMLINUX)-initramfs.bin + dd if=$(KDIR)/vmlinux-initramfs.bin.lzma of=$(VMLINUX)-initramfs.lzma bs=65536 conv=sync + dd if=$(KDIR)/vmlinux-initramfs.bin.gz of=$(VMLINUX)-initramfs.gz bs=65536 conv=sync + $(call MkuImage,gzip,,$(KDIR)/vmlinux-initramfs.bin.gz,$(UIMAGE)-initramfs-gzip.bin) + $(call MkuImage,lzma,,$(KDIR)/vmlinux-initramfs.bin.lzma,$(UIMAGE)-initramfs-lzma.bin) + cp $(KDIR)/loader-generic-initramfs.elf $(VMLINUX)-initramfs-lzma.elf + $(call Image/Build/Initramfs) +endef + +Image/Build/WRT400N/buildkernel=$(call MkuImageLzma,$(2),$(3)) + +define Image/Build/WRT400N + $(call Sysupgrade/KRuImage,$(1),$(2),1310720,6488064) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + wrt400n $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/root.$(1) $(call factoryname,$(1),$(2)); \ + fi +endef + + +define Image/Build/CameoAP94/buildkernel + $(call MkuImageLzma,$(2),$(3) $(4)) + $(call MkuImageLzma,$(2)-fat,$(3) $(5)) +endef + +define Image/Build/CameoAP94 + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval fwsize_fat=$(call mtdpartsize,firmware,$(5))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + dd if=$(call sysupname,$(1),$(2)); \ + echo -n "$(6)"; \ + ) > $(call imgname,$(1),$(2))-backup-loader.bin; \ + if [ `stat -c%s $(call sysupname,$(1),$(2))` -gt 4194304 ]; then \ + echo "Warning: $(call sysupname,$(1),$(2)) is too big" >&2; \ + else \ + ( \ + dd if=$(call sysupname,$(1),$(2)) bs=4096k conv=sync; \ + echo -n "$(7)"; \ + ) > $(call factoryname,$(1),$(2)); \ + fi; \ + fi + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2)-fat.uImage,0,$(KDIR)/root.$(1),$$$$(($(fwsize_fat)-4*64*1024)),$(KDIR_TMP)/$(2)-fat.bin,64) + if [ -e "$(KDIR_TMP)/$(2)-fat.bin" ]; then \ + echo -n "" > $(KDIR_TMP)/$(2)-fat.dummy; \ + sh $(TOPDIR)/scripts/combined-image.sh \ + "$(KDIR_TMP)/$(2)-fat.bin" \ + "$(KDIR_TMP)/$(2)-fat.dummy" \ + $(call sysupname,$(1),$(2)-fat); \ + fi +endef + +define Image/Build/WZRHP + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(3)-4*$(4)*1024)),$(4)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ + dd if=$(call sysupname,$(1),$(2)); \ + ) > $(call imgname,$(1),$(2))-tftp.bin; \ + buffalo-enc -p $(5) -v 1.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(KDIR_TMP)/$(2).enc; \ + buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ + -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ + -i $(KDIR_TMP)/$(2).enc \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + +Image/Build/WZRHP64K/buildkernel=$(call MkuImageLzma,$(2),$(3)) +Image/Build/WZRHP64K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) +Image/Build/WZRHP64K=$(call Image/Build/WZRHP,$(1),$(2),33095680,64,$(4)) + +Image/Build/WZRHP128K/buildkernel=$(call MkuImageLzma,$(2),$(3)) +Image/Build/WZRHP128K/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) +Image/Build/WZRHP128K=$(call Image/Build/WZRHP,$(1),$(2),33030144,128,$(4)) + + +Image/Build/WHRHPG300N/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/WHRHPG300N/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/WHRHPG300N + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + ( \ + echo -n -e "# Airstation Public Fmt1\x00\x00\x00\x00\x00\x00\x00\x00"; \ + dd if=$(call sysupname,$(1),$(2)); \ + ) > $(call imgname,$(1),$(2))-tftp.bin; \ + buffalo-enc -p $(5) -v 1.99 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(KDIR_TMP)/$(2).enc; \ + buffalo-tag -b $(5) -p $(5) -a ath -v 1.99 -m 1.01 -l mlang8 \ + -w 3 -c 0x80041000 -d 0x801e8000 -f 1 -r M_ \ + -i $(KDIR_TMP)/$(2).enc \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + + +define Image/Build/Cameo + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + factory_size=$$$$(($(fwsize) - $(6))); \ + ( \ + dd if=$(call sysupname,$(1),$(2)) bs=$$$${factory_size} conv=sync; \ + echo -n $(5); \ + ) > $(call factoryname,$(1),$(2)); \ + fi +endef + +Image/Build/CameoAP81/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap81_mtdlayout)) +Image/Build/CameoAP81=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap81_mtdlayout),$(4),65536) +Image/Build/CameoAP81/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap81_mtdlayout)) + +Image/Build/CameoAP91/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap91_mtdlayout)) +Image/Build/CameoAP91=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap91_mtdlayout),$(4),65536) +Image/Build/CameoAP91/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap91_mtdlayout)) + +Image/Build/CameoAP99/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap99_mtdlayout)) +Image/Build/CameoAP99=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap99_mtdlayout),$(4),65536) +Image/Build/CameoAP99/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap99_mtdlayout)) + +Image/Build/CameoAP123_4M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) +Image/Build/CameoAP123_4M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_ap123_mtdlayout_4M),$(4),26) +Image/Build/CameoAP123_4M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap123_mtdlayout_4M)) + +Image/Build/CameoAP135/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/CameoAP135=$(call Image/Build/Cameo,$(1),$(2),$(3),$(4),$(5),26) +Image/Build/CameoAP135/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +Image/Build/CameoDB120/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout)) +Image/Build/CameoDB120=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout),$(4),26) +Image/Build/CameoDB120/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout)) + +Image/Build/CameoDB120_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_db120_mtdlayout_8M)) +Image/Build/CameoDB120_8M=$(call Image/Build/Cameo,$(1),$(2),$(3),$(cameo_db120_mtdlayout_8M),$(4),26) +Image/Build/CameoDB120_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_db120_mtdlayout_8M)) + +define Image/Build/CameoHornet + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + for r in $(7); do \ + [ -n "$$$$r" ] && dashr="-$$$$r" || dashr=; \ + [ -z "$$$$r" ] && r="DEF"; \ + mkcameofw -M HORNET -R "$$$$r" -S $(5) -V $(6) -c \ + -K $(8) -I $(fwsize) \ + -k "$(call sysupname,$(1),$(2))" \ + -o $(call imgname,$(1),$(2))-factory$$$$dashr.bin; \ + true; \ + done; \ + fi +endef + +Image/Build/CameoAP121/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout)) +Image/Build/CameoAP121=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout),$(4),$(5),$(6),0xe0000) +Image/Build/CameoAP121/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout)) + +Image/Build/CameoAP121_8M/buildkernel=$(call MkuImageLzma,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) +Image/Build/CameoAP121_8M=$(call Image/Build/CameoHornet,$(1),$(2),$(3),$(cameo_ap121_mtdlayout_8M),$(4),$(5),$(6),0x100000) +Image/Build/CameoAP121_8M/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(cameo_ap121_mtdlayout_8M)) + +define Image/Build/dLAN + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) + if [ -e "$(call factoryname,$(1),$(2))" ]; then \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ + fi +endef + +Image/Build/dLANLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/dLANLzma=$(call Image/Build/dLAN,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/dLANLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Ath + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ + fi +endef + +Image/Build/AthGzip/buildkernel=$(call MkuImageGzip,$(2),$(3) $(4)) +Image/Build/AthGzip=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/AthGzip/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(4)) + +Image/Build/AthLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/AthLzma=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/AthLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + + +Image/Build/Belkin/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Belkin/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Belkin + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(call Sysupgrade/RKuImage,$(1),$(2),$(kernsize),$(rootsize)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \ + -n "uImage" \ + -i $(KDIR_TMP)/vmlinux-$(2).uImage \ + -o $(KDIR_TMP)/$(2)-uImage; \ + edimax_fw_header -m $(5) -v "OpenWrt$(REVISION)" \ + -n "rootfs" \ + -i $(KDIR)/root.$(1) \ + -o $(KDIR_TMP)/$(2)-rootfs; \ + ( \ + dd if=$(KDIR_TMP)/$(2)-rootfs; \ + dd if=$(KDIR_TMP)/$(2)-uImage; \ + ) > "$(call factoryname,$(1),$(2))"; \ + fi +endef + +define Image/Build/EnGenius + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(eval rootsize=$(call mtdpartsize,rootfs,$(4))) + $(eval kernsize=$(call mtdpartsize,kernel,$(4))) + $(call Sysupgrade/$(5),$(1),$(2),$(if $(6),$(6),$(kernsize)),$(if $(rootsize),$(rootsize),$(fwsize))) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync; \ + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync; \ + mksenaofw -e $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.dlf \ + -r 0x101 -p $(7) -t 2; \ + fi +endef + +Image/Build/EnGenius/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/EnGenius/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + + +define MkuImageHiWiFi + # Field ih_name needs to start with "tw150v1" + mkimage -A mips -O linux -T kernel -a 0x80060000 -C $(1) $(2) \ + -e 0x80060000 -n 'tw150v1 MIPS OpenWrt Linux-$(LINUX_VERSION)' \ + -d $(3) $(4) +endef + +define MkuImageLzmaHiWiFi + $(call PatchKernelLzma,$(1),$(2),$(3),$(4)) + $(call MkuImageHiWiFi,lzma,$(5),$(KDIR_TMP)/vmlinux$(4)-$(1).bin.lzma,$(KDIR_TMP)/vmlinux$(4)-$(1).uImage) +endef + +Image/Build/HiWiFi/buildkernel=$(call MkuImageLzmaHiWiFi,$(2),$(3) $(4)) +Image/Build/HiWiFi=$(call Image/Build/Ath,$(1),$(2),$(3),$(4),$(5),$(6),$(7)) +Image/Build/HiWiFi/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +Image/Build/PB4X/buildkernel=$(call PatchKernelLzma,$(2),$(3)) + +define Image/Build/PB4X + dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + of=$(call imgname,kernel,$(2)).bin bs=64k conv=sync + dd if=$(KDIR)/root.$(1) \ + of=$(call imgname,$(1),$(2)-rootfs).bin bs=128k conv=sync + -sh $(TOPDIR)/scripts/combined-image.sh \ + "$(call imgname,kernel,$(2)).bin" \ + "$(call imgname,$(1),$(2)-rootfs).bin" \ + $(call sysupname,$(1),$(2)) +endef + + +Image/Build/MyLoader/buildkernel=$(call PatchKernelLzma,$(2),$(3)) +Image/Build/MyLoader/initramfs=$(call PatchKernel/initramfs,$(2),$(3)) + +define Image/Build/MyLoader + $(eval fwsize=$(shell echo $$(($(4)-0x30000-4*64*1024)))) + $(eval fwimage=$(KDIR_TMP)/$(2)-$(5)-firmware.bin) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).bin.lzma,65536,$(KDIR)/root.$(1),$(fwsize),$(fwimage)) + if [ -e "$(fwimage)" ]; then \ + $(STAGING_DIR_HOST)/bin/mkmylofw -B $(2) -s $(4) -v \ + -p0x00030000:0:al:0x80060000:firmware:$(fwimage) \ + $(call imgname,$(1),$(2))-$(5)-factory.img; \ + echo -n "" > $(KDIR_TMP)/empty.bin; \ + sh $(TOPDIR)/scripts/combined-image.sh \ + $(fwimage) $(KDIR_TMP)/empty.bin \ + $(call imgname,$(1),$(2))-$(5)-sysupgrade.bin; \ + fi +endef + +Image/Build/Planex/initramfs=$(call MkuImageGzip/initramfs,$(2),$(3) $(planex_mtdlayout)) +Image/Build/Planex/loader=$(call Image/BuildLoaderAlone,$(1),gz,$(2) $(planex_mtdlayout),0x52000,0) + +define Image/Build/Planex/buildkernel + [ -e "$(KDIR)/loader-$(2).gz" ] + $(call MkuImageOKLI,$(2)) + ( \ + dd if=$(KDIR)/loader-$(2).gz bs=8128 count=1 conv=sync; \ + dd if=$(KDIR_TMP)/vmlinux-$(2).okli; \ + ) > $(KDIR_TMP)/kernel-$(2).bin + $(call MkuImage,gzip,,$(KDIR_TMP)/kernel-$(2).bin,$(KDIR_TMP)/vmlinux-$(2).uImage) +endef + +define Image/Build/Planex + $(eval fwsize=$(call mtdpartsize,firmware,$(planex_mtdlayout))) + $(call Sysupgrade/KRuImage,$(1),$(2),0,$$$$(($(fwsize)-4*64*1024)),64) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + $(STAGING_DIR_HOST)/bin/mkplanexfw \ + -B $(2) \ + -v 2.00.00 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call factoryname,$(1),$(2)); \ + fi +endef + + +Image/Build/ALFA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/ALFA/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/ALFA + $(call Sysupgrade/RKuImage,$(1),$(2),$(5),$(6)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + rm -rf $(KDIR)/$(1); \ + mkdir -p $(KDIR)/$(1); \ + cd $(KDIR)/$(1); \ + cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR)/$(1)/$(7); \ + cp $(KDIR)/root.$(1) $(KDIR)/$(1)/$(8); \ + $(TAR) zcf $(call factoryname,$(1),$(2)) -C $(KDIR)/$(1) $(7) $(8); \ + ( \ + echo WRM7222C | dd bs=32 count=1 conv=sync; \ + echo -ne '\xfe'; \ + ) >> $(call factoryname,$(1),$(2)); \ + fi +endef + + +Image/Build/Seama/loader=$(call Image/BuildLoader,$(1),bin,$(2) $(3),0x80060000) + +define Image/Build/Seama + [ -e "$(KDIR)/loader-$(2).bin" ] + $(call CompressLzma,$(KDIR)/loader-$(2).bin,$(KDIR_TMP)/loader-$(2).bin.lzma) + -rm -f $(KDIR_TMP)/image-$(2).tmp + $(call CatFiles,$(KDIR_TMP)/loader-$(2).bin.lzma,$$$$(($(6) - 64)),$(KDIR)/root.$(1),$(7),$(KDIR_TMP)/image-$(2).tmp) + [ -e "$(KDIR_TMP)/image-$(2).tmp" ] && { \ + head -c -4 "$(KDIR_TMP)/image-$(2).tmp" > "$(KDIR_TMP)/image-$(2).no-jffs2mark.tmp"; \ + $(STAGING_DIR_HOST)/bin/seama \ + -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp \ + -m "dev=/dev/mtdblock/1" -m "type=firmware"; \ + $(STAGING_DIR_HOST)/bin/seama \ + -s $(call imgname,$(1),$(2))-factory.bin \ + -m "signature=$(5)" \ + -i $(KDIR_TMP)/image-$(2).no-jffs2mark.tmp.seama; \ + tail -c 4 "$(KDIR_TMP)/image-$(2).tmp" >> $(call imgname,$(1),$(2))-factory.bin; \ + } + cat $(KDIR_TMP)/loader-$(2).bin.lzma > $(KDIR_TMP)/image-$(2)-sysupgrade.tmp + $(STAGING_DIR_HOST)/bin/seama \ + -i $(KDIR_TMP)/image-$(2)-sysupgrade.tmp \ + -m "dev=/dev/mtdblock/1" -m "type=firmware" + $(call CatFiles,$(KDIR_TMP)/image-$(2)-sysupgrade.tmp.seama,$(6),$(KDIR)/root.$(1),$(7),$(call sysupname,$(1),$(2))) +endef + +define Image/Build/Seama/initramfs + $(call PatchKernelLzma,$(2),$(3) $(4),,-initramfs) + $(STAGING_DIR_HOST)/bin/seama \ + -i $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma \ + -m "dev=/dev/mtdblock/1" -m "type=firmware" + cat $(KDIR_TMP)/vmlinux-initramfs-$(2).bin.lzma.seama > $(call imgname,initramfs,$(2))-seama.bin +endef + +Image/Build/Senao/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Senao/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Senao + mkdir -p $(KDIR_TMP)/$(2)/ + touch $(KDIR_TMP)/$(2)/FWINFO-OpenWrt-$(REVISION)-$(2) + -$(CP) ./$(2)/* $(KDIR_TMP)/$(2)/ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage \ + of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-uImage-lzma.bin bs=64k conv=sync + dd if=$(KDIR)/root.$(1) \ + of=$(KDIR_TMP)/$(2)/openwrt-senao-$(2)-root.$(1) bs=64k conv=sync + ( \ + cd $(KDIR_TMP)/$(2)/; \ + $(TAR) -cz -f $(call factoryname,$(1),$(2)) * \ + ) + -rm -rf $(KDIR_TMP)/$(2)/ + -sh $(TOPDIR)/scripts/combined-image.sh \ + $(KDIR_TMP)/vmlinux-$(2).uImage \ + $(KDIR)/root.$(1) \ + $(call sysupname,$(1),$(2)) +endef + +define Image/Build/CyberTAN + echo -n '' > $(KDIR_TMP)/empty.bin + $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp \ + -f $(KDIR_TMP)/vmlinux-$(2).uImage -F $(KDIR_TMP)/empty.bin \ + -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) + -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) \ + -i $(KDIR)/image.tmp \ + -o $(call sysupname,$(1),$(2)) + $(STAGING_DIR_HOST)/bin/trx -o $(KDIR)/image.tmp -f $(KDIR_TMP)/vmlinux-$(2).uImage \ + -x 32 -a 0x10000 -x -32 -f $(KDIR)/root.$(1) + -$(STAGING_DIR_HOST)/bin/addpattern -B $(2) -v v$(5) -g \ + -i $(KDIR)/image.tmp \ + -o $(call factoryname,$(1),$(2)) + rm $(KDIR)/image.tmp +endef + +Image/Build/CyberTANGZIP/loader=$(call Image/BuildLoader,$(1),gz,$(2),0x80060000) +Image/Build/CyberTANGZIP/buildkernel=$(call MkuImage,gzip,,$(KDIR)/loader-$(2).gz,$(KDIR_TMP)/vmlinux-$(2).uImage) +Image/Build/CyberTANGZIP=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) + +Image/Build/CyberTANLZMA/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/CyberTANLZMA=$(call Image/Build/CyberTAN,$(1),$(2),$(3),$(4),$(5)) + + +Image/Build/Netgear/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) + +define Image/Build/Netgear/buildkernel + $(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) + -rm -rf $(KDIR_TMP)/$(2) + mkdir -p $(KDIR_TMP)/$(2)/image + cat $(KDIR_TMP)/vmlinux-$(2).uImage > $(KDIR_TMP)/$(2)/image/uImage + $(STAGING_DIR_HOST)/bin/mksquashfs-lzma \ + $(KDIR_TMP)/$(2) $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1 \ + -noappend -root-owned -be -b 65536 \ + $(if $(SOURCE_DATE_EPOCH),-fixed-time $(SOURCE_DATE_EPOCH)) + ( \ + cat $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp1; \ + dd if=/dev/zero bs=1k count=1 \ + ) > $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 + mkimage -A mips -O linux -T filesystem -C none -M $(5) \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \ + -d $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs.tmp2 \ + $(KDIR_TMP)/vmlinux-$(2).uImage.squashfs +endef + +define Image/Build/Netgear + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage.squashfs,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) + if [ -e $(call sysupname,$(1),$(2)) ]; then \ + for r in $(7) ; do \ + [ -n "$$$$r" ] && dashr="-$$$$r" || dashr= ; \ + $(STAGING_DIR_HOST)/bin/mkdniimg \ + -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory$$$$dashr.img; \ + done; \ + fi +endef + + +Image/Build/NetgearLzma/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) +Image/Build/NetgearLzma/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4),-d20,,-M $(5)) + +define Image/Build/NetgearLzma + $(eval fwsize=$(call mtdpartsize,firmware,$(4))) + $(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,0,$(KDIR)/root.$(1),$(fwsize),$(call sysupname,$(1),$(2)),64) +endef + + +Image/Build/NetgearNAND/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4),,-M $(5)) + +# $(1): (empty) +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +define Image/Build/NetgearNAND/buildkernel + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(call PatchKernelLzma,$(2),$(3) $(4),-d20) + dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \ + of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \ + bs=$$$$(($(kernelsize)-131072-2*64-1)) \ + count=1 conv=sync + $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage) + echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage + # create a fake rootfs image + dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1 + mkimage -A mips -O linux -T filesystem -C none \ + -a 0xbf070000 -e 0xbf070000 \ + -n 'MIPS OpenWrt fakeroot' \ + -d $(KDIR_TMP)/fakeroot-$(2) \ + -M $(5) \ + $(KDIR_TMP)/fakeroot-$(2).uImage + # append the fake rootfs image to the kernel, it will reside in the last + # erase block of the kernel partition + cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage +endef + + +# $(1): rootfs image suffix +# $(2): Board name (small caps) +# $(3): Kernel board specific cmdline +# $(4): Kernel mtdparts definition +# $(5): U-Boot magic +# $(6): Board name (upper caps) +# $(7): firmware region code (not used yet) +# $(8): DNI Hardware version +# $(9): suffix of the configuration file for ubinize +define Image/Build/NetgearNAND + $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) + $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs + echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof + $(call ubinize,ubinize-$(9).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) + ( \ + dd if=$(KDIR_TMP)/vmlinux-$(2).uImage; \ + dd if=$(KDIR_TMP)/$(2)-root.ubi \ + ) > $(imageraw) + $(STAGING_DIR_HOST)/bin/mkdniimg \ + -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \ + -i $(imageraw) \ + -o $(call imgname,ubi,$(2))-factory.img + + $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/vmlinux-$(2).uImage) +endef + + +ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh + Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3)) + + define Image/Build/ZyXEL + $(call Sysupgrade/KRuImage,$(1),$(2),917504,2752512) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + if [ ! -f $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin ]; then \ + echo "Warning: $(IMG_PREFIX)-$(2)-u-boot.bin not found" >&2; \ + else \ + $(STAGING_DIR_HOST)/bin/mkzynfw \ + -B $(4) \ + -b $(BIN_DIR)/$(IMG_PREFIX)-$(2)-u-boot.bin \ + -r $(call sysupname,$(1),$(2)):0x10000 \ + -o $(call factoryname,$(1),$(2)); \ + fi; fi + endef +endif + +define Image/Build/ZyXELNAND/buildkernel + $(eval kernelsize=$(call mtdpartsize,kernel,$(5))) + $(call MkuImageLzma,$(2),$(3) $(5) $(6)) + mkdir -p $(KDIR_TMP)/$(2)/image/boot + cp $(KDIR_TMP)/vmlinux-$(2).uImage $(KDIR_TMP)/$(2)/image/boot/vmlinux.lzma.uImage + $(STAGING_DIR_HOST)/bin/mkfs.jffs2 \ + --pad=$(kernelsize) --big-endian --squash-uids -v -e 128KiB \ + -o $(KDIR_TMP)/$(2)-kernel.jffs2 \ + -d $(KDIR_TMP)/$(2)/image \ + 2>&1 1>/dev/null | awk '/^.+$$$$/' + -rm -rf $(KDIR_TMP)/$(2) +endef + +define Image/Build/ZyXELNAND + if [ "$(1)" != "squashfs" ]; then \ + echo Only squashfs is supported; \ + return 0; \ + fi + $(eval firmwaresize=$(call mtdpartsize,firmware,$(4))) + $(eval kernelsize=$(call mtdpartsize,kernel,$(4))) + $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img) + $(CP) $(KDIR)/root.$(1) $(KDIR_TMP)/ubi_root.img + $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048,-E 5) + ( \ + dd if=$(KDIR_TMP)/$(2)-kernel.jffs2; \ + dd if=$(KDIR_TMP)/$(2)-root.ubi \ + ) > $(imageraw) + dd if=$(imageraw) of=$(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1)-factory.bin \ + bs=128k conv=sync + $(call Image/Build/SysupgradeNAND,$(2),squashfs,$(KDIR_TMP)/$(2)-kernel.jffs2) +endef + + +Image/Build/OpenMesh/buildkernel=$(call MkuImageLzma,$(2)) +Image/Build/OpenMesh/initramfs=$(call MkuImageLzma/initramfs,$(2),) + +define Image/Build/OpenMesh + -sh $(TOPDIR)/scripts/om-fwupgradecfg-gen.sh \ + "$(4)" \ + "$(BUILD_DIR)/fwupgrade.cfg-$(4)" \ + "$(KDIR_TMP)/vmlinux-$(2).uImage" \ + "$(KDIR)/root.$(1)" + -sh $(TOPDIR)/scripts/combined-ext-image.sh \ + "$(4)" "$(call factoryname,$(1),$(2))" \ + "$(BUILD_DIR)/fwupgrade.cfg-$(4)" "fwupgrade.cfg" \ + "$(KDIR_TMP)/vmlinux-$(2).uImage" "kernel" \ + "$(KDIR)/root.$(1)" "rootfs" + if [ -e "$(call factoryname,$(1),$(2))" ]; then \ + cp "$(call factoryname,$(1),$(2))" "$(call sysupname,$(1),$(2))"; \ + fi +endef + + +Image/Build/Zcomax/buildkernel=$(call MkuImageLzma,$(2),$(3) $(4)) +Image/Build/Zcomax/initramfs=$(call MkuImageLzma/initramfs,$(2),$(3) $(4)) + +define Image/Build/Zcomax + $(call Sysupgrade/RKuImage,$(1),$(2),1507328,6356992) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + $(STAGING_DIR_HOST)/bin/mkzcfw \ + -B $(2) \ + -k $(KDIR_TMP)/vmlinux-$(2).uImage \ + -r $(BIN_DIR)/$(IMG_PREFIX)-root.$(1) \ + -o $(call imgname,$(1),$(2))-factory.img; \ + fi +endef + + +# $(1): template name to be defined, etc. squashfs-only, 64k, 64kraw, etc. +# $(2): jffs2 blocksize. +define Jffs2Template + define Image/Build/Template/$(1)/jffs2-$(2) + $$(call Image/Build/$$(1),jffs2-$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef +endef + +# $(1): template name to be defined. +# $(2): squashfs suffix to be used. +# $(3): jffs2 suffix to be used. +define BuildTemplate + # $(1) : name of build method. + # $(2) : board name. + # $(3) : kernel command line. + # $(4)~$(8): extra arguments. + define Image/Build/Template/$(1)/initramfs + $$(call Image/Build/$$(1)/initramfs,initramfs,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/loader + $$(call Image/Build/$$(1)/loader,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/buildkernel + $$(call Image/Build/$$(1)/buildkernel,,$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + define Image/Build/Template/$(1)/squashfs + $$(call Image/Build/$$(1),squashfs$(2),$$(2),$$(3),$$(4),$$(5),$$(6),$$(7),$$(8),$$(9),$$(10)) + endef + $(if $(3),$(foreach bs,$(3),$(eval $(call Jffs2Template,$(1),$(bs))))) +endef + +$(eval $(call BuildTemplate,squashfs-only)) +$(eval $(call BuildTemplate,64k,-64k,64k)) +$(eval $(call BuildTemplate,64kraw,-raw,64k)) +$(eval $(call BuildTemplate,64kraw-nojffs,-raw)) +$(eval $(call BuildTemplate,128k,,128k)) +$(eval $(call BuildTemplate,128kraw,-raw,128k)) +$(eval $(call BuildTemplate,256k,,256k)) +$(eval $(call BuildTemplate,all,,64k 128k 256k)) + +ifeq ($(SUBTARGET),generic) +$(eval $(call SingleProfile,ALFA,64k,ALFANX,alfa-nx,ALFA-NX,ttyS0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,vmlinux.gz.uImage,pb9x-2.6.31-jffs2)) +$(eval $(call SingleProfile,ALFA,64k,HORNETUB,hornet-ub,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel_image,rootfs_image)) +$(eval $(call SingleProfile,ALFA,64k,TUBE2H8M,tube2h-8M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_8M),1638400,6291456,kernel.image,rootfs.image)) + +$(eval $(call SingleProfile,AthGzip,64k,AP81,ap81,AP81,ttyS0,115200,$$(ap81_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthGzip,64k,AP83,ap83,AP83,ttyS0,115200,$$(ap83_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthGzip,64k,AP96,ap96,AP96,ttyS0,115200,$$(ap96_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthGzip,64k,WNDAP360,wndap360,WNDAP360,ttyS0,9600,$$(wndap360_mtdlayout),KRuImage)) + +$(eval $(call SingleProfile,AthLzma,64k,ALFAAP120C,alfa-ap120c,ALFA-AP120C,ttyS0,115200,$$(alfa_ap120c_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,ALFAAP96,alfa-ap96,ALFA-AP96,ttyS0,115200,$$(alfa_ap96_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,ALL0258N,all0258n,ALL0258N,ttyS0,115200,$$(all0258n_mtdlayout),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,256k,ALL0315N,all0315n,ALL0315N,ttyS0,115200,$$(all0315n_mtdlayout),KRuImage,262144)) +$(eval $(call SingleProfile,AthLzma,64k,AP113,ap113,AP113,ttyS0,115200,$$(ap113_mtd_layout),RK)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_2M,ap121-2M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_2M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_4M,ap121-4M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_8M,ap121-8M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_8M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP121_16M,ap121-16M,AP121,ttyATH0,115200,$$(ap121_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP121MINI,ap121-mini,AP121-MINI,ttyATH0,115200,$$(ap121_mtdlayout_4M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP132,ap132,AP132,ttyS0,115200,$$(ap132_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP135,ap135-020,AP135-020,ttyS0,115200,$$(ap135_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP136_010,ap136-010,AP136-010,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP136_020,ap136-020,AP136-020,ttyS0,115200,$$(ap136_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP143_8M,ap143-8M,AP143,ttyS0,115200,$$(ap143_mtdlayout_8M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP143_16M,ap143-16M,AP143,ttyS0,115200,$$(ap143_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP147_010,ap147-010,AP147-010,ttyS0,115200,$$(ap147_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,AP152_16M,ap152-16M,AP152,ttyS0,115200,$$(ap152_mtdlayout_16M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,BXU2000N2,bxu2000n-2-a1,BXU2000n-2-A1,ttyS0,115200,$$(bxu2000n2_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,CAP4200AG,cap4200ag,CAP4200AG,ttyS0,115200,$$(cap4200ag_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,DB120,db120,DB120,ttyS0,115200,$$(db120_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,DRAGINO2,dragino2,DRAGINO2,ttyATH0,115200,$$(dragino2_mtdlayout),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,EWDORINAP,ew-dorin,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,EWDORINRT,ew-dorin-router,EW-DORIN-ROUTER,ttyATH0,115200,$$(ew-dorin_mtdlayout_4M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,EWDORIN16M,ew-dorin-16M,EW-DORIN,ttyATH0,115200,$$(ew-dorin_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,HORNETUBx2,hornet-ub-x2,HORNET-UB,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,MR12,mr12,MR12,ttyS0,115200,$$(mr12_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,MR16,mr16,MR16,ttyS0,115200,$$(mr16_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,PB92,pb92,PB92,ttyS0,115200,$$(pb92_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,TUBE2H16M,tube2h-16M,TUBE2H,ttyATH0,115200,$$(alfa_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,WLR8100,wlr8100,WLR8100,ttyS0,115200,$$(wlr8100_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ342_16M,wpj342-16M,WPJ342,ttyS0,115200,$$(wpj342_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ344_16M,wpj344-16M,WPJ344,ttyS0,115200,$$(wpj344_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,DR344,dr344,DR344,ttyS0,115200,$$(dr344_mtdlayout),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ531_16M,wpj531-16M,WPJ531,ttyS0,115200,$$(wpj531_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,WPJ558_16M,wpj558-16M,WPJ558,ttyS0,115200,$$(wpj558_mtdlayout_16M),KRuImage,65536)) +$(eval $(call SingleProfile,AthLzma,64k,WRTNODE2Q,wrtnode2q,WRTNODE2Q,ttyS0,115200,$$(wrtnode2q_mtdlayout),KRuImage)) +$(eval $(call SingleProfile,AthLzma,64k,YUN_8M,yun-8M,Yun,ttyATH0,250000,$$(yun_mtdlayout_8M),RKuImage)) +$(eval $(call SingleProfile,AthLzma,64k,YUN_16M,yun-16M,Yun,ttyATH0,250000,$$(yun_mtdlayout_16M),RKuImage)) + +$(eval $(call SingleProfile,Belkin,64k,F9K1115V2,f9k1115v2,F9K1115V2,ttyS0,115200,$$(f9k1115v2_mtdlayout),BR-6679BAC)) + +$(eval $(call SingleProfile,CameoAP91,64kraw,DIR600A1,dir-600-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-00")) +$(eval $(call SingleProfile,CameoAP91,64kraw,DIR601A1,dir-601-a1,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-02")) +$(eval $(call SingleProfile,CameoAP91,64kraw,FR54RTR,fr-54rtr,DIR-600-A1,ttyS0,115200,"AP91-AR7240-RT-090223-01")) + +$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E1,dir-615-e1,DIR-615-E1,ttyS0,115200,"AP93-AR7240-RT-081028-00")) +$(eval $(call SingleProfile,CameoAP99,64kraw,DIR615E4,dir-615-e4,DIR-615-E4,ttyS0,115200,"AP99-AR7240-RT-091105-05")) + +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I1,dir-615-i1,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-1012I1-00")) +$(eval $(call SingleProfile,CameoAP123_4M,64kraw,DIR615I3,dir-615-i3,DIR-615-I1,ttyS0,115200,"00DB120AR9341-RT-101214-00")) + +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,A02RBW300N,a02-rb-w300n,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-03")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,DIR615C1,dir-615-c1,DIR-615-C1,ttyS0,115200,"AP81-AR9130-RT-070614-02")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW632BRP,tew-632brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-00")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_FW,tew-652brp,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-080609-05")) +$(eval $(call SingleProfile,CameoAP81,64kraw-nojffs,TEW652BRP_RECOVERY,tew-652brp-recovery,TEW-632BRP,ttyS0,115200,"AP81-AR9130-RT-070614-02")) + +$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,TEW712BR,tew-712br,TEW-712BR,ttyATH0,115200,"HORNET-RT-TEW712BR-3",1.99,"")) +$(eval $(call SingleProfile,CameoAP121,64kraw-nojffs,DIR601B1,dir-601-b1,TEW-712BR,ttyATH0,115200,"HORNET-RT-DIR601B1-3",2.99.99,"" "NA")) +$(eval $(call SingleProfile,CameoAP121_8M,64kraw-nojffs,DIR505A1,dir-505-a1,DIR-505-A1,ttyATH0,115200,"HORNET-PACKET-DIR505A1-3",1.99.99,"")) + +$(eval $(call SingleProfile,CameoAP135,64kraw,DGL5500A1,dgl-5500-a1,DGL-5500-A1,ttyS0,115200,$$(dgl_5500_mtdlayout),"00AP135AR9558-RT-130508-00")) +$(eval $(call SingleProfile,CameoAP135,64kraw,TEW823DRU,tew-823dru,TEW-823DRU,ttyS0,115200,$$(tew823dru_mtdlayout) mem=256M,"00AP135AR9558-RT-131129-00")) + +$(eval $(call SingleProfile,CameoDB120,64kraw,DHP1565A1,dhp-1565-a1,DHP-1565-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) +$(eval $(call SingleProfile,CameoDB120,64kraw,DIR825C1,dir-825-c1,DIR-825-C1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) +$(eval $(call SingleProfile,CameoDB120,64kraw,DIR835A1,dir-835-a1,DIR-835-A1,ttyS0,115200,"00DB120AR9344-RT-101214-00")) + +$(eval $(call SingleProfile,CameoDB120_8M,64kraw,TEW732BR,tew-732br,TEW-732BR,ttyS0,115200,"00DB120AR9341-RT-120906-NA")) + +$(eval $(call SingleProfile,CyberTANGZIP,64k,WRT160NL,wrt160nl,WRT160NL,ttyS0,115200,,1.00.01)) + +$(eval $(call SingleProfile,CyberTANLZMA,64k,MYNETREXT,mynet-rext,MYNET-REXT,ttyS0,115200,$$(mynet_rext_mtdlayout) root=31:2,1.00.01)) + +$(eval $(call SingleProfile,CameoAP94,64kraw,DIR825B1,dir-825-b1,DIR-825-B1,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) +$(eval $(call SingleProfile,CameoAP94,64kraw,TEW673GRU,tew-673gru,TEW-673GRU,ttyS0,115200,$$(cameo_ap94_mtdlayout),$$(cameo_ap94_mtdlayout_fat),01AP94-AR7161-RT-080619-01,00AP94-AR7161-RT-080619-01)) +$(eval $(call SingleProfile,CameoAP94,64kraw,DLRTDEV01,dlrtdev01,DIR-825-B1,ttyS0,115200,$$(dlrtdev_mtdlayout),$$(dlrtdev_mtdlayout_fat),01AP94-AR7161-RT-080619-00,00AP94-AR7161-RT-080619-00)) + +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_Hotspot,dlan-hotspot,dLAN-Hotspot,ttyATH0,115200,$$(dlan_hotspot_mtdlayout) mem=64M,KRuImage,65536)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_500_wp,dlan-pro-500-wp,dLAN-pro-500-wp,ttyS0,115200,$$(dlan_pro_500_wp_mtdlayout) mem=128M,KRuImage,65536)) +$(eval $(call SingleProfile,dLANLzma,64k,dLAN_pro_1200_ac,dlan-pro-1200-ac,dLAN-pro-1200-ac,ttyS0,115200,$$(dlan_pro_1200_ac_mtdlayout) mem=128M,KRuImage,65536)) + +$(eval $(call SingleProfile,EnGenius,64k,ESR900,esr900,ESR900,ttyS0,115200,$$(esr900_mtdlayout),KRuImage,,0x4e)) +$(eval $(call SingleProfile,EnGenius,64k,ESR1750,esr1750,ESR1750,ttyS0,115200,$$(esr1750_mtdlayout),KRuImage,,0x61)) +$(eval $(call SingleProfile,EnGenius,64k,EPG5000,epg5000,EPG5000,ttyS0,115200,$$(epg5000_mtdlayout),KRuImage,,0x71)) + +$(eval $(call SingleProfile,HiWiFi,64k,HIWIFI_HC6361,hiwifi-hc6361,HiWiFi-HC6361,ttyATH0,115200,$$(hiwifi_hc6361_mtdlayout),KRuImage)) + +$(eval $(call SingleProfile,MyLoader,64k,WP543_2M,wp543,,ttyS0,115200,0x200000,2M)) +$(eval $(call SingleProfile,MyLoader,64k,WP543_4M,wp543,,ttyS0,115200,0x400000,4M)) +$(eval $(call SingleProfile,MyLoader,64k,WP543_8M,wp543,,ttyS0,115200,0x800000,8M)) +$(eval $(call SingleProfile,MyLoader,64k,WP543_16M,wp543,,ttyS0,115200,0x1000000,16M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_4M,wpe72,,ttyS0,115200,0x400000,4M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_8M,wpe72,,ttyS0,115200,0x800000,8M)) +$(eval $(call SingleProfile,MyLoader,64k,WPE72_16M,wpe72,,ttyS0,115200,0x1000000,16M)) + +$(eval $(call SingleProfile,Netgear,64kraw,WNR2000V3,wnr2000v3,WNR2000V3,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303033,WNR2000V3,"" NA,-H 29763551+04+32)) +$(eval $(call SingleProfile,NetgearLzma,64kraw,WNR2000V4,wnr2000v4,WNR2000V4,ttyS0,115200,$$(wnr2000v4_mtdlayout),0x32303034,WNR2000V4,"" NA,)) +$(eval $(call SingleProfile,Netgear,64kraw,WNR2200,wnr2200,WNR2200,ttyS0,115200,$$(wnr2200_mtdlayout),0x32323030,wnr2200,"" NA,)) +$(eval $(call SingleProfile,Netgear,64kraw,REALWNR612V2,wnr612v2,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,WNR612V2,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,N150R,n150r,WNR612V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x32303631,N150R,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,REALWNR1000V2,wnr1000v2,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303031,WNR1000V2,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,WNR1000V2_VC,wnr1000v2-vc,WNR1000V2,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31303030,WNR1000V2-VC,"",)) +$(eval $(call SingleProfile,Netgear,64kraw,WPN824N,wpn824n,WPN824N,ttyS0,115200,$$(wnr2000v3_mtdlayout),0x31313030,WPN824N,"" NA,)) + +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM2P,om2p,,,,OM2P)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5P,om5p,,,,OM5P)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,OM5PAC,om5pac,,,,OM5PAC)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR600,mr600,,,,MR600)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR900,mr900,,,,MR900)) +$(eval $(call SingleProfile,OpenMesh,squashfs-only,MR1750,mr1750,,,,MR1750)) + +$(eval $(call SingleProfile,PB4X,128k,ALL0305,all0305,ALL0305,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,128k,EAP7660D,eap7660d,EAP7660D,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JA76PF,ja76pf,JA76PF,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JA76PF2,ja76pf2,JA76PF2,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,JWAP003,jwap003,JWAP003,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,PB42,pb42,PB42,ttyS0,115200)) +$(eval $(call SingleProfile,PB4X,64k,PB44,pb44,PB44,ttyS0,115200)) + +$(eval $(call SingleProfile,Planex,64kraw,MZKW04NU,mzk-w04nu,MZK-W04NU,ttyS0,115200)) +$(eval $(call SingleProfile,Planex,64kraw,MZKW300NH,mzk-w300nh,MZK-W300NH,ttyS0,115200)) + +$(eval $(call SingleProfile,Seama,64k,MYNETN600,mynet-n600,MYNET-N600,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd16_wd_db600,65536,16187392)) +$(eval $(call SingleProfile,Seama,64k,MYNETN750,mynet-n750,MYNET-N750,ttyS0,115200,$$(mynet_n600_mtdlayout),wrgnd13_wd_av,65536,16187392)) + +$(eval $(call SingleProfile,Seama,64k,QIHOO360,qihoo-c301,QIHOO-C301,ttyS0,115200,$$(qihoo_c301_mtdlayout),wrgac26_qihoo360_360rg,65536,16121856)) + +$(eval $(call SingleProfile,Senao,squashfs-only,EAP300V2,eap300v2,EAP300V2,ttyS0,115200,$$(eap300v2_mtdlayout))) + +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRG301N,whr-g301n,WHR-G301N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-G301N)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPG300N,whr-hp-g300n,WHR-HP-G300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-G300N)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WHRHPGN,whr-hp-gn,WHR-HP-GN,ttyS0,115200,$$(whrhpg300n_mtdlayout),WHR-HP-GN)) +$(eval $(call SingleProfile,WHRHPG300N,64kraw,WLAEAG300N,wlae-ag300n,WLAE-AG300N,ttyS0,115200,$$(whrhpg300n_mtdlayout),WLAE-AG300N)) + +$(eval $(call SingleProfile,WRT400N,64k,WRT400N,wrt400n,WRT400N,ttyS0,115200)) + +$(eval $(call SingleProfile,WZRHP128K,128kraw,WZRHPG300NH,wzr-hp-g300nh,WZR-HP-G300NH,ttyS0,115200,WZR-HP-G300NH)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G300NH2,ttyS0,115200,WZR-HP-G300NH2)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) + +$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) +$(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) + +$(eval $(call SingleProfile,ZyXEL,64k,NBG_460N_550N_550NH,nbg460n_550n_550nh,NBG460N,ttyS0,115200,NBG-460N)) + +$(eval $(call MultiProfile,AP121,AP121_2M AP121_4M AP121_8M AP121_16M)) +$(eval $(call MultiProfile,AP136,AP136_010 AP136_020)) +$(eval $(call MultiProfile,AP143,AP143_8M AP143_16M)) +$(eval $(call MultiProfile,AP147,AP147_010)) +$(eval $(call MultiProfile,AP152,AP152_16M)) +$(eval $(call MultiProfile,DIR615IX,DIR615I1 DIR615I3)) +$(eval $(call MultiProfile,EWDORIN, EWDORINAP EWDORINRT EWDORIN16M)) +$(eval $(call MultiProfile,OPENMESH,OM2P OM5P OM5PAC MR600 MR900 MR1750)) +$(eval $(call MultiProfile,TEW652BRP,TEW652BRP_FW TEW652BRP_RECOVERY)) +$(eval $(call MultiProfile,TUBE2H,TUBE2H8M TUBE2H16M)) +$(eval $(call MultiProfile,WNR612V2,REALWNR612V2 N150R)) +$(eval $(call MultiProfile,WNR1000V2,REALWNR1000V2 WNR1000V2_VC)) +$(eval $(call MultiProfile,WP543,WP543_2M WP543_4M WP543_8M WP543_16M)) +$(eval $(call MultiProfile,WPE72,WPE72_4M WPE72_8M WPE72_16M)) +$(eval $(call MultiProfile,WPJ342,WPJ342_16M)) +$(eval $(call MultiProfile,WPJ344,WPJ344_16M)) +$(eval $(call MultiProfile,WPJ531,WPJ531_16M)) +$(eval $(call MultiProfile,WPJ558,WPJ558_16M)) +$(eval $(call MultiProfile,Yun,YUN_16M YUN_8M)) + +$(eval $(call MultiProfile,Minimal,$(SINGLE_PROFILES))) +$(eval $(call MultiProfile,Madwifi,EAP7660D WP543)) + +define LegacyDevice/OM2P + DEVICE_TITLE := OpenMesh OM2P/OM2Pv2/OM2P-HS/OM2P-HSv2/OM2P-HSv3/OM2P-LC + DEVICE_PACKAGES := kmod-ath9k om-watchdog +endef +LEGACY_DEVICES += OM2P + +endif # ifeq ($(SUBTARGET),generic) + +ifeq ($(SUBTARGET),nand) + +$(eval $(call SingleProfile,NetgearNAND,64k,WNDR3700V4,wndr3700v4,WNDR3700_V4,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR3700v4,"",-H 29763948+128+128,wndr4300)) +$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300V1,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3,wndr4300)) +$(eval $(call SingleProfile,NetgearNAND,64k,R6100,r6100,R6100,ttyS0,115200,$$(r6100_mtdlayout),0x36303030,R6100,"",-H 29764434+0+128+128+2x2+2x2,wndr4300)) + +$(eval $(call SingleProfile,ZyXELNAND,128k,NBG6716,nbg6716,NBG6716,ttyS0,115200,NBG6716,$$(zyx_nbg6716_mtdlayout),mem=256M)) + +$(eval $(call MultiProfile,WNDR4300,WNDR3700V4 WNDR4300V1)) + +endif # ifeq ($(SUBTARGET),nand) + +$(eval $(call MultiProfile,Default,$(SINGLE_PROFILES))) + +define Image/Build/squashfs + cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-raw + cp $(KDIR)/root.squashfs $(KDIR)/root.squashfs-64k + $(STAGING_DIR_HOST)/bin/padjffs2 $(KDIR)/root.squashfs-64k 64 + cp $(KDIR)/root.squashfs-64k $(BIN_DIR)/$(IMG_PREFIX)-root.squashfs-64k + $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync +endef + +define Image/Build/jffs2 + dd if=$(KDIR)/root.$(1) of=$(BIN_DIR)/$(IMG_PREFIX)-root.$(1) bs=128k conv=sync +endef + +define Image/Build/Initramfs + $(call Image/Build/Profile/$(IMAGE_PROFILE),initramfs) +endef + +define Image/Prepare + gzip -9n -c $(KDIR)/vmlinux > $(KDIR)/vmlinux.bin.gz + $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) +ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),) + gzip -9n -c $(KDIR)/vmlinux-initramfs > $(KDIR)/vmlinux-initramfs.bin.gz + $(call CompressLzma,$(KDIR)/vmlinux-initramfs,$(KDIR)/vmlinux-initramfs.bin.lzma) + $(call Image/BuildLoader,generic,elf,,,-initramfs) +endif + $(call Image/BuildLoader,generic,elf) + $(call Image/Build/Profile/$(if $(CONFIG_IB),Default,$(IMAGE_PROFILE)),loader) +endef + +define Image/Prepare/Profile + $(call Image/Build/Profile/$(1),loader) +endef + +define Image/Build/Profile + $(call Image/Build/Profile/$(1),buildkernel) + $(call Image/Build/Profile/$(1),$(2)) +endef + +# $(1): filesystem type. +define Image/Build + $(call Image/Build/$(call rootfs_type,$(1)),$(1)) + $(call Image/Build/Profile/$(IMAGE_PROFILE),$(1)) +endef diff --git a/target/linux/ar71xx/image/nand.mk b/target/linux/ar71xx/image/nand.mk new file mode 100644 index 0000000000..ec97271c75 --- /dev/null +++ b/target/linux/ar71xx/image/nand.mk @@ -0,0 +1,19 @@ +define Build/MerakiNAND + -$(STAGING_DIR_HOST)/bin/mkmerakifw \ + -B $(BOARDNAME) -s \ + -i $@ \ + -o $@.new + @mv $@.new $@ +endef + +define Device/mr18 + BOARDNAME = MR18 + BLOCKSIZE := 64k + CONSOLE = ttyS0,115200 + MTDPARTS = ar934x-nfc:512k(nandloader)ro,8M(kernel),8M(recovery),113664k(ubi),128k@130944k(odm-caldata)ro + IMAGES := sysupgrade.tar + KERNEL := kernel-bin | patch-cmdline | MerakiNAND + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | MerakiNAND + IMAGE/sysupgrade.tar := sysupgrade-nand +endef +TARGET_DEVICES += mr18 diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk new file mode 100644 index 0000000000..71220f3141 --- /dev/null +++ b/target/linux/ar71xx/image/tp-link.mk @@ -0,0 +1,752 @@ +DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT TPLINK_HEADER_VERSION TPLINK_BOARD_NAME + +# combine kernel and rootfs into one image +# mktplinkfw <type> <optional extra arguments to mktplinkfw binary> +# <type> is "sysupgrade" or "factory" +# +# -a align the rootfs start on an <align> bytes boundary +# -j add jffs2 end-of-filesystem markers +# -s strip padding from end of the image +# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x) +define Build/mktplinkfw + -$(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \ + -m $(TPLINK_HEADER_VERSION) \ + -k $(word 1,$^) \ + -r $@ \ + -o $@.new \ + -j -X 0x40000 \ + -a $(call rootfs_align,$(FILESYSTEM)) \ + $(wordlist 2,$(words $(1)),$(1)) \ + $(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@ +endef + +# mktplinkfw-initramfs <optional extra arguments to mktplinkfw binary> +# +# -c combined image +define Build/mktplinkfw-initramfs + $(STAGING_DIR_HOST)/bin/mktplinkfw \ + -H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) $(1) \ + -m $(TPLINK_HEADER_VERSION) \ + -k $@ \ + -o $@.new \ + -s -S \ + -c + @mv $@.new $@ +endef + +define Build/tplink-safeloader + -$(STAGING_DIR_HOST)/bin/tplink-safeloader \ + -B $(TPLINK_BOARD_NAME) \ + -V $(REVISION) \ + -k $(word 1,$^) \ + -r $@ \ + -o $@.new \ + -j \ + $(wordlist 2,$(words $(1)),$(1)) \ + $(if $(findstring sysupgrade,$(word 1,$(1))),-S) && mv $@.new $@ || rm -f $@ +endef + +define Device/tplink + TPLINK_HWREV := 0x1 + TPLINK_HEADER_VERSION := 1 + LOADER_TYPE := gz + KERNEL := kernel-bin | patch-cmdline | lzma + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | mktplinkfw-initramfs + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade + IMAGE/factory.bin := append-rootfs | mktplinkfw factory +endef + +define Device/tplink-nolzma +$(Device/tplink) + LOADER_FLASH_OFFS := 0x22000 + COMPILE := loader-$(1).gz + COMPILE/loader-$(1).gz := loader-okli-compile + KERNEL := copy-file $(KDIR)/vmlinux.bin.lzma | uImage lzma -M 0x4f4b4c49 | loader-okli $(1) + KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs.bin.lzma | loader-kernel-cmdline | mktplinkfw-initramfs +endef + +define Device/tplink-4m +$(Device/tplink-nolzma) + TPLINK_FLASHLAYOUT := 4M + IMAGE_SIZE := 3904k +endef + +define Device/tplink-8m +$(Device/tplink-nolzma) + TPLINK_FLASHLAYOUT := 8M + IMAGE_SIZE := 7936k +endef + +define Device/tplink-4mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 4Mlzma + IMAGE_SIZE := 3904k +endef + +define Device/tplink-8mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 8Mlzma + IMAGE_SIZE := 7936k +endef + +define Device/tplink-16mlzma +$(Device/tplink) + TPLINK_FLASHLAYOUT := 16Mlzma + IMAGE_SIZE := 15872k +endef + +define Device/cpe510-520 + MTDPARTS := spi0.0:128k(u-boot)ro,64k(pation-table)ro,64k(product-info)ro,1536k(kernel),6144k(rootfs),192k(config)ro,64k(ART)ro,7680k@0x40000(firmware) + IMAGE_SIZE := 7680k + BOARDNAME := CPE510 + TPLINK_BOARD_NAME := CPE510 + DEVICE_PROFILE := CPE510 + LOADER_TYPE := elf + KERNEL := kernel-bin | patch-cmdline | lzma | loader-kernel + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade + IMAGE/factory.bin := append-rootfs | tplink-safeloader factory +endef + +define Device/cpe210-220 +$(Device/cpe510-520) + BOARDNAME := CPE210 +endef +TARGET_DEVICES += cpe210-220 cpe510-520 + +define Device/tl-wdr4300-v1 +$(Device/tplink-8mlzma) + BOARDNAME = TL-WDR4300 + DEVICE_PROFILE = TLWDR4300 + TPLINK_HWID := 0x43000001 +endef + +define Device/tl-wdr3500-v1 +$(Device/tl-wdr4300-v1) + BOARDNAME = TL-WDR3500 + TPLINK_HWID := 0x35000001 +endef + +define Device/tl-wdr3600-v1 +$(Device/tl-wdr4300-v1) + TPLINK_HWID := 0x36000001 +endef + +define Device/tl-wdr4300-v1-il +$(Device/tl-wdr4300-v1) + TPLINK_HWID := 0x43008001 +endef + +define Device/tl-wdr4310-v1 +$(Device/tl-wdr4300-v1) + TPLINK_HWID := 0x43100001 +endef + +define Device/mw4530r-v1 +$(Device/tl-wdr4300-v1) + TPLINK_HWID := 0x45300001 +endef +TARGET_DEVICES += tl-wdr3500-v1 tl-wdr3600-v1 tl-wdr4300-v1 tl-wdr4300-v1-il tl-wdr4310-v1 mw4530r-v1 + +define Device/tl-wdr6500-v2 +$(Device/tplink-8mlzma) + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma + KERNEL_INITRAMFS := kernel-bin | patch-cmdline | lzma | uImage lzma | mktplinkfw-initramfs + BOARDNAME = TL-WDR6500-v2 + DEVICE_PROFILE = TLWDR6500V2 + TPLINK_HWID := 0x65000002 + TPLINK_HEADER_VERSION := 2 +endef +TARGET_DEVICES += tl-wdr6500-v2 + +define Device/tl-wdr3320-v2 +$(Device/tplink-4mlzma) + BOARDNAME = TL-WDR3320-v2 + DEVICE_PROFILE = TLWDR3320V2 + TPLINK_HWID := 0x33200002 + TPLINK_HEADER_VERSION := 2 +endef +TARGET_DEVICES += tl-wdr3320-v2 + +define Device/archer-c5-v1 + $(Device/tplink-16mlzma) + BOARDNAME := ARCHER-C5 + DEVICE_PROFILE := ARCHERC7 + TPLINK_HWID := 0xc5000001 +endef + +define Device/archer-c7-v1 + $(Device/tplink-8mlzma) + BOARDNAME := ARCHER-C7 + DEVICE_PROFILE := ARCHERC7 + TPLINK_HWID := 0x75000001 +endef + +define Device/archer-c7-v2 + $(Device/tplink-16mlzma) + BOARDNAME := ARCHER-C7-V2 + DEVICE_PROFILE := ARCHERC7 + TPLINK_HWID := 0xc7000002 + IMAGE/factory.bin := append-rootfs | mktplinkfw factory -C US +endef + +define Device/tl-wdr7500-v3 + $(Device/tplink-8mlzma) + BOARDNAME := ARCHER-C7 + DEVICE_PROFILE := ARCHERC7 + TPLINK_HWID := 0x75000003 +endef +TARGET_DEVICES += archer-c5-v1 archer-c7-v1 archer-c7-v2 tl-wdr7500-v3 + +define Device/tl-mr10u-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR10U + DEVICE_PROFILE := TLMR10U + TPLINK_HWID := 0x00100101 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr11u-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR11U + DEVICE_PROFILE := TLMR11U + TPLINK_HWID := 0x00110101 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr11u-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR11U + DEVICE_PROFILE := TLMR11U + TPLINK_HWID := 0x00110102 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr12u-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR13U + DEVICE_PROFILE := TLMR12U + TPLINK_HWID := 0x00120101 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr13u-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR13U + DEVICE_PROFILE := TLMR13U + TPLINK_HWID := 0x00130101 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += tl-mr10u-v1 tl-mr11u-v1 tl-mr11u-v2 tl-mr12u-v1 tl-mr13u-v1 + +define Device/tl-mr3020-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR3020 + DEVICE_PROFILE := TLMR3020 + TPLINK_HWID := 0x30200001 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr3040-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR3040 + DEVICE_PROFILE := TLMR3040 + TPLINK_HWID := 0x30400001 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr3040-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR3040-v2 + DEVICE_PROFILE := TLMR3040 + TPLINK_HWID := 0x30400002 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr3220-v1 + $(Device/tplink-4m) + BOARDNAME := TL-MR3220 + DEVICE_PROFILE := TLMR3220 + TPLINK_HWID := 0x32200001 +endef + +define Device/tl-mr3220-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR3220-v2 + DEVICE_PROFILE := TLMR3220 + TPLINK_HWID := 0x32200002 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-mr3420-v1 + $(Device/tplink-4m) + BOARDNAME := TL-MR3420 + DEVICE_PROFILE := TLMR3420 + TPLINK_HWID := 0x34200001 +endef + +define Device/tl-mr3420-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-MR3420-v2 + DEVICE_PROFILE := TLMR3420 + TPLINK_HWID := 0x34200002 +endef +TARGET_DEVICES += tl-mr3020-v1 tl-mr3040-v1 tl-mr3040-v2 tl-mr3220-v1 tl-mr3220-v2 tl-mr3420-v1 tl-mr3420-v2 + +define Device/tl-wr703n-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR703N + DEVICE_PROFILE := TLWR703 + TPLINK_HWID := 0x07030101 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr710n-v1 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR710N + DEVICE_PROFILE := TLWR710 + TPLINK_HWID := 0x07100001 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr710n-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR710N + DEVICE_PROFILE := TLWR710 + TPLINK_HWID := 0x07100002 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr710n-v2.1 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR710N + DEVICE_PROFILE := TLWR710 + TPLINK_HWID := 0x07100002 + TPLINK_HWREV := 0x00000002 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr720n-v3 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR720N-v3 + DEVICE_PROFILE := TLWR720 + TPLINK_HWID := 0x07200103 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr720n-v4 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR720N-v3 + DEVICE_PROFILE := TLWR720 + TPLINK_HWID := 0x07200104 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += tl-wr703n-v1 tl-wr710n-v1 tl-wr710n-v2 tl-wr710n-v2.1 tl-wr720n-v3 tl-wr720n-v4 + +define Device/tl-wr740n-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR740 + TPLINK_HWID := 0x07400001 +endef + +define Device/tl-wr740n-v3 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR740 + TPLINK_HWID := 0x07400003 +endef + +define Device/tl-wr740n-v4 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR741ND-v4 + DEVICE_PROFILE := TLWR740 + TPLINK_HWID := 0x07400004 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr740n-v5 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR741ND-v4 + DEVICE_PROFILE := TLWR740 + TPLINK_HWID := 0x07400005 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr740n-v6 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v9 + DEVICE_PROFILE := TLWR740 + TPLINK_HWID := 0x07400006 +endef + +define Device/tl-wr741nd-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR741 + TPLINK_HWID := 0x07410001 +endef + +define Device/tl-wr741nd-v2 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR741 + TPLINK_HWID := 0x07410001 +endef + +define Device/tl-wr741nd-v4 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR741ND-v4 + DEVICE_PROFILE := TLWR741 + TPLINK_HWID := 0x07410004 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr741nd-v5 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR741ND-v4 + DEVICE_PROFILE := TLWR741 + TPLINK_HWID := 0x07400005 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wr810n + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR810N + DEVICE_PROFILE := TLWR810 + TPLINK_HWID := 0x08100001 +endef +TARGET_DEVICES += tl-wr810n + +define Device/tl-wr743nd-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR743 + TPLINK_HWID := 0x07430001 +endef + +define Device/tl-wr743nd-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR741ND-v4 + DEVICE_PROFILE := TLWR743 + TPLINK_HWID := 0x07430002 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += tl-wr740n-v1 tl-wr740n-v3 tl-wr740n-v4 tl-wr740n-v5 tl-wr740n-v6 tl-wr741nd-v1 tl-wr741nd-v2 tl-wr741nd-v4 tl-wr741nd-v5 tl-wr743nd-v1 tl-wr743nd-v2 + +define Device/tl-wr841-v1.5 + $(Device/tplink-4m) + BOARDNAME := TL-WR841N-v1.5 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410002 + TPLINK_HWREV := 2 +endef + +define Device/tl-wr841-v3 + $(Device/tplink-4m) + BOARDNAME := TL-WR941ND + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410003 + TPLINK_HWREV := 3 +endef + +define Device/tl-wr841-v5 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410005 +endef + +define Device/tl-wr841-v7 + $(Device/tplink-4m) + BOARDNAME := TL-WR841N-v7 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410007 +endef + +define Device/tl-wr841-v8 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v8 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410008 +endef + +define Device/tl-wr841-v9 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v9 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410009 +endef + +define Device/tl-wr841-v10 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v9 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410010 +endef + +define Device/tl-wr841-v11 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v11 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08410011 +endef + +define Device/tl-wr842n-v1 + $(Device/tplink-8m) + BOARDNAME := TL-MR3420 + DEVICE_PROFILE := TLWR842 + TPLINK_HWID := 0x08420001 +endef + +define Device/tl-wr842n-v2 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR842N-v2 + DEVICE_PROFILE := TLWR842 + TPLINK_HWID := 0x8420002 +endef + +define Device/tl-wr842n-v3 + $(Device/tplink-16mlzma) + BOARDNAME := TL-WR842N-v3 + DEVICE_PROFILE := TLWR842 + TPLINK_HWID := 0x08420003 +endef + +define Device/tl-wr843nd-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v8 + DEVICE_PROFILE := TLWR843 + TPLINK_HWID := 0x08430001 +endef + +define Device/tl-wr847n-v8 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR841N-v8 + DEVICE_PROFILE := TLWR841 + TPLINK_HWID := 0x08470008 +endef +TARGET_DEVICES += tl-wr841-v1.5 tl-wr841-v3 tl-wr841-v5 tl-wr841-v7 tl-wr841-v8 tl-wr841-v9 tl-wr841-v10 tl-wr841-v11 tl-wr842n-v1 tl-wr842n-v2 tl-wr842n-v3 tl-wr843nd-v1 tl-wr847n-v8 + +define Device/tl-wr941nd-v2 + $(Device/tplink-4m) + BOARDNAME := TL-WR941ND + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410002 + TPLINK_HWREV := 2 +endef + +define Device/tl-wr941nd-v3 + $(Device/tplink-4m) + BOARDNAME := TL-WR941ND + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410002 + TPLINK_HWREV := 2 +endef + +define Device/tl-wr941nd-v4 + $(Device/tplink-4m) + BOARDNAME := TL-WR741ND + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410004 +endef + +define Device/tl-wr941nd-v5 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR941ND-v5 + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410005 +endef + +define Device/tl-wr941nd-v6 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR941ND-v6 + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410006 +endef + +# Chinese version (unlike European) is similar to the TL-WDR3500 +define Device/tl-wr941nd-v6-cn + $(Device/tplink-4mlzma) + BOARDNAME := TL-WDR3500 + DEVICE_PROFILE := TLWR941 + TPLINK_HWID := 0x09410006 +endef +TARGET_DEVICES += tl-wr941nd-v2 tl-wr941nd-v3 tl-wr941nd-v4 tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn + +define Device/tl-wr1041n-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WR1041N-v2 + DEVICE_PROFILE := TLWR1041 + TPLINK_HWID := 0x10410002 +endef +TARGET_DEVICES += tl-wr1041n-v2 + +define Device/tl-wr1043nd-v1 + $(Device/tplink-8m) + BOARDNAME := TL-WR1043ND + DEVICE_PROFILE := TLWR1043 + TPLINK_HWID := 0x10430001 +endef + +define Device/tl-wr1043nd-v2 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR1043ND-v2 + DEVICE_PROFILE := TLWR1043 + TPLINK_HWID := 0x10430002 +endef + +define Device/tl-wr1043nd-v3 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR1043ND-v2 + DEVICE_PROFILE := TLWR1043 + TPLINK_HWID := 0x10430003 +endef +TARGET_DEVICES += tl-wr1043nd-v1 tl-wr1043nd-v2 tl-wr1043nd-v3 + +define Device/tl-wr2543-v1 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WR2543N + DEVICE_PROFILE := TLWR2543 + TPLINK_HWID := 0x25430001 + IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade -v 3.13.99 + IMAGE/factory.bin := append-rootfs | mktplinkfw factory -v 3.13.99 +endef +TARGET_DEVICES += tl-wr2543-v1 + +define Device/tl-wdr4900-v2 + $(Device/tplink-8mlzma) + BOARDNAME := TL-WDR4900-v2 + DEVICE_PROFILE := TLWDR4900V2 + TPLINK_HWID := 0x49000002 +endef +TARGET_DEVICES += tl-wdr4900-v2 + +define Device/tl-wa701nd-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND + DEVICE_PROFILE := TLWA701 + TPLINK_HWID := 0x07010001 +endef + +define Device/tl-wa701nd-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA701ND-v2 + DEVICE_PROFILE := TLWA701 + TPLINK_HWID := 0x07010002 + CONSOLE := ttyATH0,115200 +endef + +define Device/tl-wa730re-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND + DEVICE_PROFILE := TLWA730RE + TPLINK_HWID := 0x07300001 +endef + +define Device/tl-wa750re-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA750RE + DEVICE_PROFILE := TLWA750 + TPLINK_HWID := 0x07500001 +endef + +define Device/tl-wa7510n + $(Device/tplink-4m) + BOARDNAME := TL-WA7510N + DEVICE_PROFILE := TLWA7510 + TPLINK_HWID := 0x75100001 +endef +TARGET_DEVICES += tl-wa701nd-v1 tl-wa701nd-v2 tl-wa730re-v1 tl-wa750re-v1 tl-wa7510n + +define Device/tl-wa801nd-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND + DEVICE_PROFILE := TLWA801 + TPLINK_HWID := 0x08010001 +endef + +define Device/tl-wa801nd-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA801ND-v2 + DEVICE_PROFILE := TLWA801 + TPLINK_HWID := 0x08010002 +endef + +define Device/tl-wa801nd-v3 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA801ND-v3 + DEVICE_PROFILE := TLWA801 + TPLINK_HWID := 0x08010003 +endef + +define Device/tl-wa830re-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND + DEVICE_PROFILE := TLWA830 + TPLINK_HWID := 0x08300010 +endef + +define Device/tl-wa830re-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA830RE-v2 + DEVICE_PROFILE := TLWA830 + TPLINK_HWID := 0x08300002 +endef + +define Device/tl-wa850re-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA850RE + DEVICE_PROFILE := TLWA850 + TPLINK_HWID := 0x08500001 +endef + +define Device/tl-wa860re-v1 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA860RE + DEVICE_PROFILE := TLWA860 + TPLINK_HWID := 0x08600001 +endef +TARGET_DEVICES += tl-wa801nd-v1 tl-wa801nd-v2 tl-wa801nd-v3 tl-wa830re-v1 tl-wa830re-v2 tl-wa850re-v1 tl-wa860re-v1 + +define Device/tl-wa901nd-v1 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND + DEVICE_PROFILE := TLWA901 + TPLINK_HWID := 0x09010001 +endef + +define Device/tl-wa901nd-v2 + $(Device/tplink-4m) + BOARDNAME := TL-WA901ND-v2 + DEVICE_PROFILE := TLWA901 + TPLINK_HWID := 0x09010002 +endef + +define Device/tl-wa901nd-v3 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA901ND-v3 + DEVICE_PROFILE := TLWA901 + TPLINK_HWID := 0x09010003 +endef + +define Device/tl-wa901nd-v4 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA901ND-v4 + DEVICE_PROFILE := TLWA901 + TPLINK_HWID := 0x09010004 +endef + +TARGET_DEVICES += tl-wa901nd-v1 tl-wa901nd-v2 tl-wa901nd-v3 tl-wa901nd-v4 + +define Device/tl-wa7210n-v2 + $(Device/tplink-4mlzma) + BOARDNAME := TL-WA7210N-v2 + DEVICE_PROFILE := TLWA7210 + TPLINK_HWID := 0x72100002 + CONSOLE := ttyATH0,115200 +endef +TARGET_DEVICES += tl-wa7210n-v2 + diff --git a/target/linux/ar71xx/image/ubnt.mk b/target/linux/ar71xx/image/ubnt.mk new file mode 100644 index 0000000000..4589345d40 --- /dev/null +++ b/target/linux/ar71xx/image/ubnt.mk @@ -0,0 +1,247 @@ +# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) +# UBNT_TYPE e.g. one of (BZ, XM, XW) +# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) + +# mkubntimage is using the kernel image direct +# routerboard creates partitions out of the ubnt header +define Build/mkubntimage + $(STAGING_DIR_HOST)/bin/mkfwimage \ + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ + -k $(word 1,$^) \ + -r $@ \ + -o $@ +endef + +# all UBNT XM device expect the kernel image to have 1024k while flash, when +# booting the image, the size doesn't matter. +define Build/mkubntimage-split + dd if=$@ of=$@.old1 bs=1024k count=1 + dd if=$@ of=$@.old2 bs=1024k skip=1 + $(STAGING_DIR_HOST)/bin/mkfwimage \ + -B $(UBNT_BOARD) -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ + -k $@.old1 \ + -r $@.old2 \ + -o $@ + rm $@.old1 $@.old2 +endef + +define Build/mkubntimage2 + $(STAGING_DIR_HOST)/bin/mkfwimage2 -f 0x9f000000 \ + -v $(UBNT_TYPE).$(UBNT_CHIP).v6.0.0-OpenWrt-$(REVISION) \ + -p jffs2:0x50000:0xf60000:0:0:$@ \ + -o $@.new + @mv $@.new $@ +endef + +DEVICE_VARS += UBNT_BOARD UBNT_CHIP UBNT_TYPE + +# UBNT_BOARD e.g. one of (XS2, XS5, RS, XM) +# UBNT_TYPE e.g. one of (BZ, XM, XW) +# UBNT_CHIP e.g. one of (ar7240, ar933x, ar934x) +define Device/ubnt-xm + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7552k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro + UBNT_TYPE := XM + UBNT_BOARD := XM + UBNT_CHIP := ar7240 + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split + IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +define Device/ubnt-xw + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7552k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro + UBNT_TYPE := XW + UBNT_BOARD := XM + UBNT_CHIP := ar934x + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split + IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +define Device/ubnt-bz + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7552k + MTDPARTS = spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7552k(firmware),256k(cfg)ro,64k(EEPROM)ro + UBNT_TYPE := BZ + UBNT_BOARD := XM + UBNT_CHIP := ar934x + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage-split + IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +define Device/ubnt-unifiac + DEVICE_PROFILE := UBNT + IMAGE_SIZE := 7744k + MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro + IMAGES := sysupgrade.bin + IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) +endef + +define Device/rw2458n + $(Device/ubnt-xm) + BOARDNAME := RW2458N +endef + +define Device/ubnt-airrouter + $(Device/ubnt-xm) + BOARDNAME := UBNT-AR +endef + +define Device/ubnt-bullet-m + $(Device/ubnt-xm) + BOARDNAME := UBNT-BM +endef + +define Device/ubnt-rocket-m + $(Device/ubnt-xm) + BOARDNAME := UBNT-RM +endef + +define Device/ubnt-nano-m + $(Device/ubnt-xm) + BOARDNAME := UBNT-NM +endef +TARGET_DEVICES += rw2458n ubnt-airrouter ubnt-bullet-m ubnt-rocket-m ubnt-nano-m + +define Device/ubnt-unifi + $(Device/ubnt-bz) + BOARDNAME := UBNT-UF + DEVICE_PROFILE := UBNT UBNTUNIFI +endef + +define Device/ubnt-unifiac-lite + $(Device/ubnt-unifiac) + DEVICE_PROFILE := UBNT UBNTUNIFIACLITE + BOARDNAME := UBNT-UF-AC-LITE +endef + +define Device/ubnt-unifiac-pro + $(Device/ubnt-unifiac) + DEVICE_PROFILE := UBNT UBNTUNIFIACPRO + BOARDNAME := UBNT-UF-AC-PRO +endef + +define Device/ubnt-unifi-outdoor + $(Device/ubnt-bz) + BOARDNAME := UBNT-U20 + DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR +endef +TARGET_DEVICES += ubnt-unifi ubnt-unifiac-lite ubnt-unifiac-pro ubnt-unifi-outdoor + +define Device/ubnt-nano-m-xw + $(Device/ubnt-xw) + BOARDNAME := UBNT-NM-XW +endef + +define Device/ubnt-loco-m-xw + $(Device/ubnt-xw) + BOARDNAME := UBNT-LOCO-XW +endef + +define Device/ubnt-rocket-m-xw + $(Device/ubnt-xw) + BOARDNAME := UBNT-RM-XW +endef + +define Device/ubnt-rocket-m-ti + $(Device/ubnt-xw) + BOARDNAME := UBNT-RM-TI + UBNT_TYPE := TI + UBNT_BOARD := XM +endef +TARGET_DEVICES += ubnt-nano-m-xw ubnt-loco-m-xw ubnt-rocket-m-xw ubnt-rocket-m-ti + +define Device/ubnt-air-gateway + $(Device/ubnt-xm) + BOARDNAME := UBNT-AGW + UBNT_BOARD := XM + UBNT_TYPE := AirGW + UBNT_CHIP := ar933x + CONSOLE = ttyATH0,115200 +endef +TARGET_DEVICES += ubnt-air-gateway + +define Device/ubnt-air-gateway-pro + $(Device/ubnt-xm) + BOARDNAME := UBNT-AGWP + UBNT_TYPE := AirGWP + UBNT_CHIP := ar934x + CONSOLE = ttyS0,115200 +endef +TARGET_DEVICES += ubnt-air-gateway-pro + +define Device/ubdev01 + $(Device/ubnt-xm) + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,7488k(firmware),64k(certs),256k(cfg)ro,64k(EEPROM)ro + BOARDNAME := UBNT-UF + UBNT_BOARD := UBDEV01 + UBNT_TYPE := XM + UBNT_CHIP := ar7240 +endef + +TARGET_DEVICES += ubdev01 + +define Device/ubnt-routerstation + IMAGE_SIZE := 16128k + IMAGES := sysupgrade.bin factory.bin + IMAGE/factory.bin = append-rootfs | pad-rootfs | mkubntimage + IMAGE/sysupgrade.bin = append-rootfs | pad-rootfs | combined-image | check-size $$$$(IMAGE_SIZE) + KERNEL := kernel-bin | patch-cmdline | lzma | pad-to $$(BLOCKSIZE) +endef + +define Device/ubnt-rs +$(Device/ubnt-routerstation) + BOARDNAME := UBNT-RS + DEVICE_PROFILE := Madwifi UBNT UBNTRS + UBNT_BOARD := RS + UBNT_TYPE := RSx + UBNT_CHIP := ar7100 +endef + +define Device/ubnt-rspro +$(Device/ubnt-routerstation) + BOARDNAME := UBNT-RSPRO + DEVICE_PROFILE := Madwifi UBNT UBNTRSPRO + UBNT_BOARD := RSPRO + UBNT_TYPE := RSPRO + UBNT_CHIP := ar7100pro +endef + +define Device/ubnt-ls-sr71 +$(Device/ubnt-routerstation) + BOARDNAME := UBNT-LS-SR71 + DEVICE_PROFILE := Madwifi UBNT + UBNT_BOARD := LS-SR71 + UBNT_TYPE := LS-SR71 + UBNT_CHIP := ar7100 +endef + +TARGET_DEVICES += ubnt-rs ubnt-rspro ubnt-ls-sr71 + +define Device/ubnt-uap-pro + KERNEL_SIZE := 1536k + IMAGE_SIZE := 15744k + MTDPARTS := spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,1536k(kernel),14208k(rootfs),256k(cfg)ro,64k(EEPROM)ro,15744k@0x50000(firmware) + UBNT_TYPE := BZ + UBNT_CHIP := ar934x + BOARDNAME := UAP-PRO + DEVICE_PROFILE := UBNT UAPPRO + KERNEL := kernel-bin | patch-cmdline | lzma | uImage lzma | jffs2 kernel0 + IMAGES := sysupgrade.bin factory.bin + IMAGE/sysupgrade.bin = append-kernel $$$$(KERNEL_SIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) + IMAGE/factory.bin = $$(IMAGE/sysupgrade.bin) | mkubntimage2 +endef + +define Device/ubnt-unifi-outdoor-plus +$(Device/ubnt-uap-pro) + UBNT_CHIP := ar7240 + BOARDNAME := UBNT-UOP + DEVICE_PROFILE := UBNT +endef + +TARGET_DEVICES += ubnt-uap-pro ubnt-unifi-outdoor-plus diff --git a/target/linux/ar71xx/mikrotik/profiles/01-minimal.mk b/target/linux/ar71xx/mikrotik/profiles/01-minimal.mk index 3651c88ab2..a334977d48 100644 --- a/target/linux/ar71xx/mikrotik/profiles/01-minimal.mk +++ b/target/linux/ar71xx/mikrotik/profiles/01-minimal.mk @@ -8,6 +8,7 @@ define Profile/DefaultNoWifi NAME:=Default Profile (no WiFi) PACKAGES:= + PRIORITY := 2 endef define Profile/DefaultNoWifi/Description diff --git a/target/linux/ar71xx/mikrotik/profiles/02-ath5k.mk b/target/linux/ar71xx/mikrotik/profiles/02-ath5k.mk index a291ff68ae..fa304b7d4c 100644 --- a/target/linux/ar71xx/mikrotik/profiles/02-ath5k.mk +++ b/target/linux/ar71xx/mikrotik/profiles/02-ath5k.mk @@ -8,6 +8,7 @@ define Profile/Ath5k NAME:=Atheros WiFi (ath5k) PACKAGES:=kmod-ath5k -kmod-ath9k + PRIORITY := 3 endef define Profile/Ath5k/Description diff --git a/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch b/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch index 50be509e6c..4699c82746 100644 --- a/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch +++ b/target/linux/ar71xx/patches-4.4/607-MIPS-ath79-ubnt-xm-fixes.patch @@ -12,92 +12,3 @@ help Say 'Y' here if you want your kernel to support the Ubiquiti Networks XM (rev 1.0) board. ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -16,10 +16,11 @@ - - #include <asm/mach-ath79/irq.h> - --#include "machtypes.h" -+#include "dev-ap9x-pci.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" --#include "dev-spi.h" -+#include "dev-m25p80.h" -+#include "machtypes.h" - #include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 -@@ -32,7 +33,7 @@ - #define UBNT_XM_KEYS_POLL_INTERVAL 20 - #define UBNT_XM_KEYS_DEBOUNCE_INTERVAL (3 * UBNT_XM_KEYS_POLL_INTERVAL) - --#define UBNT_XM_EEPROM_ADDR (u8 *) KSEG1ADDR(0x1fff1000) -+#define UBNT_XM_EEPROM_ADDR 0x1fff1000 - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -@@ -65,48 +66,10 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - --static struct spi_board_info ubnt_xm_spi_info[] = { -- { -- .bus_num = 0, -- .chip_select = 0, -- .max_speed_hz = 25000000, -- .modalias = "mx25l6405d", -- } --}; -- --static struct ath79_spi_platform_data ubnt_xm_spi_data = { -- .bus_num = 0, -- .num_chipselect = 1, --}; -- --#ifdef CONFIG_PCI --static struct ath9k_platform_data ubnt_xm_eeprom_data; -- --static int ubnt_xm_pci_plat_dev_init(struct pci_dev *dev) --{ -- switch (PCI_SLOT(dev->devfn)) { -- case 0: -- dev->dev.platform_data = &ubnt_xm_eeprom_data; -- break; -- } -- -- return 0; --} -- --static void __init ubnt_xm_pci_init(void) --{ -- memcpy(ubnt_xm_eeprom_data.eeprom_data, UBNT_XM_EEPROM_ADDR, -- sizeof(ubnt_xm_eeprom_data.eeprom_data)); -- -- ath79_pci_set_plat_dev_init(ubnt_xm_pci_plat_dev_init); -- ath79_register_pci(); --} --#else --static inline void ubnt_xm_pci_init(void) {} --#endif /* CONFIG_PCI */ -- - static void __init ubnt_xm_init(void) - { -+ u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); - -@@ -114,10 +77,8 @@ static void __init ubnt_xm_init(void) - ARRAY_SIZE(ubnt_xm_gpio_keys), - ubnt_xm_gpio_keys); - -- ath79_register_spi(&ubnt_xm_spi_data, ubnt_xm_spi_info, -- ARRAY_SIZE(ubnt_xm_spi_info)); -- -- ubnt_xm_pci_init(); -+ ath79_register_m25p80(NULL); -+ ap91_pci_init(eeprom, NULL); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, diff --git a/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch index b463d14156..2bfd58d4e8 100644 --- a/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch +++ b/target/linux/ar71xx/patches-4.4/608-MIPS-ath79-ubnt-xm-add-more-boards.patch @@ -1,629 +1,8 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -12,16 +12,26 @@ - - #include <linux/init.h> - #include <linux/pci.h> -+#include <linux/platform_device.h> - #include <linux/ath9k_platform.h> -+#include <linux/etherdevice.h> -+#include <linux/ar8216_platform.h> - -+#include <asm/mach-ath79/ath79.h> - #include <asm/mach-ath79/irq.h> -+#include <asm/mach-ath79/ar71xx_regs.h> - -+#include <linux/platform_data/phy-at803x.h> -+ -+#include "common.h" - #include "dev-ap9x-pci.h" -+#include "dev-eth.h" - #include "dev-gpio-buttons.h" - #include "dev-leds-gpio.h" - #include "dev-m25p80.h" -+#include "dev-usb.h" -+#include "dev-wmac.h" - #include "machtypes.h" --#include "pci.h" - - #define UBNT_XM_GPIO_LED_L1 0 - #define UBNT_XM_GPIO_LED_L2 1 -@@ -37,19 +47,19 @@ - - static struct gpio_led ubnt_xm_leds_gpio[] __initdata = { - { -- .name = "ubnt-xm:red:link1", -+ .name = "ubnt:red:link1", - .gpio = UBNT_XM_GPIO_LED_L1, - .active_low = 0, - }, { -- .name = "ubnt-xm:orange:link2", -+ .name = "ubnt:orange:link2", - .gpio = UBNT_XM_GPIO_LED_L2, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link3", -+ .name = "ubnt:green:link3", - .gpio = UBNT_XM_GPIO_LED_L3, - .active_low = 0, - }, { -- .name = "ubnt-xm:green:link4", -+ .name = "ubnt:green:link4", - .gpio = UBNT_XM_GPIO_LED_L4, - .active_low = 0, - }, -@@ -66,9 +76,13 @@ static struct gpio_keys_button ubnt_xm_g - } - }; - -+#define UBNT_M_WAN_PHYMASK BIT(4) -+ - static void __init ubnt_xm_init(void) - { - u8 *eeprom = (u8 *) KSEG1ADDR(UBNT_XM_EEPROM_ADDR); -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); - - ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xm_leds_gpio), - ubnt_xm_leds_gpio); -@@ -79,9 +93,552 @@ static void __init ubnt_xm_init(void) - - ath79_register_m25p80(NULL); - ap91_pci_init(eeprom, NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); - } - - MIPS_MACHINE(ATH79_MACH_UBNT_XM, - "UBNT-XM", - "Ubiquiti Networks XM (rev 1.0) board", - ubnt_xm_init); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_BULLET_M, "UBNT-BM", "Ubiquiti Bullet M", -+ ubnt_xm_init); -+ -+static void __init ubnt_rocket_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_usb(); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M, "UBNT-RM", "Ubiquiti Rocket M", -+ ubnt_rocket_m_setup); -+ -+static void __init ubnt_nano_m_setup(void) -+{ -+ ubnt_xm_init(); -+ ath79_register_eth(1); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M, "UBNT-NM", "Ubiquiti Nanostation M", -+ ubnt_nano_m_setup); -+ -+static struct gpio_led ubnt_airrouter_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:green:globe", -+ .gpio = 0, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:power", -+ .gpio = 11, -+ .active_low = 1, -+ .default_state = LEDS_GPIO_DEFSTATE_ON, -+ } -+}; -+ -+static void __init ubnt_airrouter_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_local_mac(ath79_eth1_data.mac_addr, mac1); -+ -+ ath79_register_eth(1); -+ ath79_register_eth(0); -+ ath79_register_usb(); -+ -+ ap91_pci_init(ee, NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airrouter_leds_gpio), -+ ubnt_airrouter_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRROUTER, "UBNT-AR", "Ubiquiti AirRouter", -+ ubnt_airrouter_setup); -+ -+static struct gpio_led ubnt_unifi_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:dome", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:dome", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static struct gpio_led ubnt_unifi_outdoor_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:orange:front", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:front", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+static struct gpio_led ubnt_unifi_outdoor_plus_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:white:front", -+ .gpio = 1, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:blue:front", -+ .gpio = 0, -+ .active_low = 0, -+ } -+}; -+ -+ -+static void __init ubnt_unifi_setup(void) -+{ -+ u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~UBNT_M_WAN_PHYMASK); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0); -+ ath79_register_eth(0); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_leds_gpio), -+ ubnt_unifi_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI, "UBNT-UF", "Ubiquiti UniFi", -+ ubnt_unifi_setup); -+ -+ -+#define UBNT_UNIFIOD_PRI_PHYMASK BIT(4) -+#define UBNT_UNIFIOD_2ND_PHYMASK (BIT(0) | BIT(1) | BIT(2) | BIT(3)) -+ -+static void __init ubnt_unifi_outdoor_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | -+ UBNT_UNIFIOD_2ND_PHYMASK)); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); -+ ath79_register_eth(1); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_leds_gpio), -+ ubnt_unifi_outdoor_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR, "UBNT-U20", -+ "Ubiquiti UniFiAP Outdoor", -+ ubnt_unifi_outdoor_setup); -+ -+ -+static void __init ubnt_unifi_outdoor_plus_setup(void) -+{ -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac2 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_mdio(0, ~(UBNT_UNIFIOD_PRI_PHYMASK | -+ UBNT_UNIFIOD_2ND_PHYMASK)); -+ -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac2, 0); -+ ath79_register_eth(0); -+ ath79_register_eth(1); -+ -+ ap91_pci_init(ee, NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifi_outdoor_plus_leds_gpio), -+ ubnt_unifi_outdoor_plus_leds_gpio); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, "UBNT-UOP", -+ "Ubiquiti UniFiAP Outdoor+", -+ ubnt_unifi_outdoor_plus_setup); -+ -+ -+static struct gpio_led ubnt_uap_pro_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:white:dome", -+ .gpio = 12, -+ }, { -+ .name = "ubnt:blue:dome", -+ .gpio = 13, -+ } -+}; -+ -+static struct gpio_keys_button uap_pro_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 17, -+ .active_low = 1, -+ } -+}; -+ -+static struct ar8327_pad_cfg uap_pro_ar8327_pad0_cfg = { -+ .mode = AR8327_PAD_MAC_RGMII, -+ .txclk_delay_en = true, -+ .rxclk_delay_en = true, -+ .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, -+ .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, -+}; -+ -+static struct ar8327_platform_data uap_pro_ar8327_data = { -+ .pad0_cfg = &uap_pro_ar8327_pad0_cfg, -+ .port0_cfg = { -+ .force_link = 1, -+ .speed = AR8327_PORT_SPEED_1000, -+ .duplex = 1, -+ .txpause = 1, -+ .rxpause = 1, -+ }, -+}; -+ -+static struct mdio_board_info uap_pro_mdio0_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 0, -+ .platform_data = &uap_pro_ar8327_data, -+ }, -+}; -+ -+#define UAP_PRO_MAC0_OFFSET 0x0000 -+#define UAP_PRO_MAC1_OFFSET 0x0006 -+#define UAP_PRO_WMAC_CALDATA_OFFSET 0x1000 -+#define UAP_PRO_PCI_CALDATA_OFFSET 0x5000 -+ -+static void __init ubnt_uap_pro_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_uap_pro_gpio_leds), -+ ubnt_uap_pro_gpio_leds); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(uap_pro_gpio_keys), -+ uap_pro_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ ath79_register_mdio(0, 0x0); -+ mdiobus_register_board_info(uap_pro_mdio0_info, -+ ARRAY_SIZE(uap_pro_mdio0_info)); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ /* GMAC0 is connected to an AR8327 switch */ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.phy_mask = BIT(0); -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_UAP_PRO, "UAP-PRO", "Ubiquiti UniFi AP Pro", -+ ubnt_uap_pro_setup); -+ -+#define UBNT_XW_GPIO_LED_L1 11 -+#define UBNT_XW_GPIO_LED_L2 16 -+#define UBNT_XW_GPIO_LED_L3 13 -+#define UBNT_XW_GPIO_LED_L4 14 -+ -+static struct gpio_led ubnt_xw_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:red:link1", -+ .gpio = UBNT_XW_GPIO_LED_L1, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:orange:link2", -+ .gpio = UBNT_XW_GPIO_LED_L2, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link3", -+ .gpio = UBNT_XW_GPIO_LED_L3, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link4", -+ .gpio = UBNT_XW_GPIO_LED_L4, -+ .active_low = 1, -+ }, -+}; -+ -+#define UBNT_ROCKET_TI_GPIO_LED_L1 16 -+#define UBNT_ROCKET_TI_GPIO_LED_L2 17 -+#define UBNT_ROCKET_TI_GPIO_LED_L3 18 -+#define UBNT_ROCKET_TI_GPIO_LED_L4 19 -+#define UBNT_ROCKET_TI_GPIO_LED_L5 20 -+#define UBNT_ROCKET_TI_GPIO_LED_L6 21 -+static struct gpio_led ubnt_rocket_ti_leds_gpio[] __initdata = { -+ { -+ .name = "ubnt:green:link1", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L1, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link2", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L2, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link3", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L3, -+ .active_low = 1, -+ }, { -+ .name = "ubnt:green:link4", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L4, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:link5", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L5, -+ .active_low = 0, -+ }, { -+ .name = "ubnt:green:link6", -+ .gpio = UBNT_ROCKET_TI_GPIO_LED_L6, -+ .active_low = 0, -+ }, -+}; -+ -+static void __init ubnt_xw_init(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), -+ ubnt_xw_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_MII_GMAC0 | AR934X_ETH_CFG_MII_GMAC0_SLAVE); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII; -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+} -+ -+static void __init ubnt_nano_m_xw_setup(void) -+{ -+ ubnt_xw_init(); -+ -+ /* GMAC0 is connected to an AR8326 switch */ -+ ath79_register_mdio(0, ~(BIT(0) | BIT(1) | BIT(5))); -+ ath79_eth0_data.phy_mask = (BIT(0) | BIT(1) | BIT(5)); -+ ath79_eth0_data.speed = SPEED_100; -+ ath79_eth0_data.duplex = DUPLEX_FULL; -+ ath79_register_eth(0); -+} -+ -+static void __init ubnt_loco_m_xw_setup(void) -+{ -+ ubnt_xw_init(); -+ -+ ath79_register_mdio(0, ~BIT(1)); -+ ath79_eth0_data.phy_mask = BIT(1); -+ ath79_register_eth(0); -+} -+ -+static void __init ubnt_rocket_m_xw_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_xw_leds_gpio), -+ ubnt_xw_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ -+ ath79_register_mdio(0, ~BIT(4)); -+ ath79_eth0_data.phy_mask = BIT(4); -+ ath79_eth0_pll_data.pll_1000 = 0x06000000; -+ ath79_register_eth(0); -+} -+ -+static struct at803x_platform_data ubnt_rocket_m_ti_at803_data = { -+ .disable_smarteee = 1, -+ .enable_rgmii_rx_delay = 1, -+ .enable_rgmii_tx_delay = 1, -+}; -+static struct mdio_board_info ubnt_rocket_m_ti_mdio_info[] = { -+ { -+ .bus_id = "ag71xx-mdio.0", -+ .phy_addr = 4, -+ .platform_data = &ubnt_rocket_m_ti_at803_data, -+ }, -+}; -+ -+static void __init ubnt_rocket_m_ti_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_rocket_ti_leds_gpio), -+ ubnt_rocket_ti_leds_gpio); -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(ubnt_xm_gpio_keys), -+ ubnt_xm_gpio_keys); -+ -+ ap91_pci_init(eeprom + 0x1000, NULL); -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0); -+ ath79_setup_ar934x_eth_rx_delay(3, 3); -+ ath79_init_mac(ath79_eth0_data.mac_addr, -+ eeprom + UAP_PRO_MAC0_OFFSET, 0); -+ ath79_init_mac(ath79_eth1_data.mac_addr, -+ eeprom + UAP_PRO_MAC1_OFFSET, 0); -+ -+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; -+ ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; -+ ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev; -+ -+ mdiobus_register_board_info(ubnt_rocket_m_ti_mdio_info, -+ ARRAY_SIZE(ubnt_rocket_m_ti_mdio_info)); -+ ath79_register_mdio(0, 0x0); -+ -+ -+ ath79_eth0_data.phy_mask = BIT(4); -+ /* read out from vendor */ -+ ath79_eth0_pll_data.pll_1000 = 0x2000000; -+ ath79_eth0_pll_data.pll_10 = 0x1313; -+ ath79_register_eth(0); -+ -+ ath79_register_mdio(1, 0x0); -+ ath79_eth1_data.phy_mask = BIT(3); -+ ath79_register_eth(1); -+} -+ -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_NANO_M_XW, "UBNT-NM-XW", "Ubiquiti Nanostation M XW", -+ ubnt_nano_m_xw_setup); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_LOCO_M_XW, "UBNT-LOCO-XW", "Ubiquiti Loco M XW", -+ ubnt_loco_m_xw_setup); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_XW, "UBNT-RM-XW", "Ubiquiti Rocket M XW", -+ ubnt_rocket_m_xw_setup); -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_ROCKET_M_TI, "UBNT-RM-TI", "Ubiquiti Rocket M TI", -+ ubnt_rocket_m_ti_setup); -+ -+static struct gpio_led ubnt_airgateway_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:blue:wlan", -+ .gpio = 0, -+ }, { -+ .name = "ubnt:white:status", -+ .gpio = 1, -+ }, -+}; -+ -+static struct gpio_keys_button airgateway_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 12, -+ .active_low = 1, -+ } -+}; -+ -+static void __init ubnt_airgateway_setup(void) -+{ -+ u32 t; -+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac1 = (u8 *) KSEG1ADDR(0x1fff0000 + ETH_ALEN); -+ u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000); -+ -+ -+ ath79_gpio_function_disable(AR933X_GPIO_FUNC_ETH_SWITCH_LED0_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED1_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED2_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED3_EN | -+ AR933X_GPIO_FUNC_ETH_SWITCH_LED4_EN); -+ -+ t = ath79_reset_rr(AR933X_RESET_REG_BOOTSTRAP); -+ t |= AR933X_BOOTSTRAP_MDIO_GPIO_EN; -+ ath79_reset_wr(AR933X_RESET_REG_BOOTSTRAP, t); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_gpio_leds), -+ ubnt_airgateway_gpio_leds); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(airgateway_gpio_keys), -+ airgateway_gpio_keys); -+ -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); -+ ath79_init_mac(ath79_eth0_data.mac_addr, mac1, 0); -+ -+ ath79_register_mdio(0, 0x0); -+ -+ ath79_register_eth(1); -+ ath79_register_eth(0); -+ -+ ath79_register_wmac(ee, NULL); -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", -+ ubnt_airgateway_setup); -+ --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -68,12 +68,16 @@ config ATH79_MACH_PB44 Atheros PB44 reference board. - + config ATH79_MACH_UBNT_XM - bool "Ubiquiti Networks XM (rev 1.0) board" + bool "Ubiquiti Networks XM/UniFi boards" diff --git a/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch b/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch deleted file mode 100644 index 27cc1e50a7..0000000000 --- a/target/linux/ar71xx/patches-4.4/610-MIPS-ath79-UBNT-add-airGateway-pro-support.patch +++ /dev/null @@ -1,62 +0,0 @@ ---- a/arch/mips/ath79/mach-ubnt-xm.c -+++ b/arch/mips/ath79/mach-ubnt-xm.c -@@ -642,3 +642,59 @@ static void __init ubnt_airgateway_setup - MIPS_MACHINE(ATH79_MACH_UBNT_AIRGW, "UBNT-AGW", "Ubiquiti AirGateway", - ubnt_airgateway_setup); - -+static struct gpio_led ubnt_airgateway_pro_gpio_leds[] __initdata = { -+ { -+ .name = "ubnt:blue:wlan", -+ .gpio = 13, -+ }, { -+ .name = "ubnt:white:status", -+ .gpio = 17, -+ }, -+}; -+ -+ -+static struct gpio_keys_button airgateway_pro_gpio_keys[] __initdata = { -+ { -+ .desc = "reset", -+ .type = EV_KEY, -+ .code = KEY_RESTART, -+ .debounce_interval = UBNT_XM_KEYS_DEBOUNCE_INTERVAL, -+ .gpio = 12, -+ .active_low = 1, -+ } -+}; -+ -+static void __init ubnt_airgateway_pro_setup(void) -+{ -+ u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000); -+ u8 *mac0 = (u8 *) KSEG1ADDR(0x1fff0000); -+ -+ ath79_register_m25p80(NULL); -+ ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_airgateway_pro_gpio_leds), -+ ubnt_airgateway_pro_gpio_leds); -+ -+ ath79_register_gpio_keys_polled(-1, UBNT_XM_KEYS_POLL_INTERVAL, -+ ARRAY_SIZE(airgateway_pro_gpio_keys), -+ airgateway_pro_gpio_keys); -+ -+ ath79_register_wmac(eeprom + UAP_PRO_WMAC_CALDATA_OFFSET, NULL); -+ ap91_pci_init(eeprom + UAP_PRO_PCI_CALDATA_OFFSET, NULL); -+ -+ -+ ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE); -+ -+ ath79_register_mdio(1, 0x0); -+ -+ /* GMAC0 is left unused in this configuration */ -+ -+ /* GMAC1 is connected to MAC0 on the internal switch */ -+ /* The PoE/WAN port connects to port 5 on the internal switch */ -+ /* The LAN port connects to port 4 on the internal switch */ -+ ath79_init_mac(ath79_eth1_data.mac_addr, mac0, 0); -+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII; -+ ath79_register_eth(1); -+ -+} -+ -+MIPS_MACHINE(ATH79_MACH_UBNT_AIRGWP, "UBNT-AGWP", "Ubiquiti AirGateway Pro", -+ ubnt_airgateway_pro_setup); diff --git a/target/linux/generic/files/include/linux/ath9k_platform.h b/target/linux/generic/files/include/linux/ath9k_platform.h index e543a64060..2c19f3b494 100644 --- a/target/linux/generic/files/include/linux/ath9k_platform.h +++ b/target/linux/generic/files/include/linux/ath9k_platform.h @@ -31,6 +31,10 @@ struct ath9k_platform_data { u32 gpio_mask; u32 gpio_val; + u32 bt_active_pin; + u32 bt_priority_pin; + u32 wlan_active_pin; + bool endian_check; bool is_clk_25mhz; bool tx_gain_buffalo; |