diff options
Diffstat (limited to 'target/linux')
3 files changed, 19 insertions, 19 deletions
diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig index 27336e112e..72d5b63ac7 100755 --- a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig +++ b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05netconfig @@ -88,10 +88,10 @@ END { print "# pppoe: PPP over Ethernet" print "# pptp: Point-to-Point tunneling Protocol" print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" - print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")" print "" print "wan_proto=dhcp" p("wan_ifname") + print "wan_device=\"" c["wan_ifname"] "\"" print "# wan_ipaddr=\"192.168.0.2\"" print "# wan_netmask=\"255.255.255.0\"" print "# wan_gateway=\"192.168.0.1\"" @@ -99,8 +99,6 @@ END { print "" print "## PPP over Ethernet and PPTP" print "# wan_ifname=\"ppp0\"" - print "# pppoe_ifname=\"" c["wan_ifname"] "\"" - print "# pptp_ifname=\"" c["wan_ifname"] "\"" print "# pptp_server_ip=\"192.168.0.1\"" } ' > /etc/config/network diff --git a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram index 70fbd46624..a561b3965b 100755 --- a/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram +++ b/target/linux/package/base-files/files/brcm-2.4/etc/init.d/S05nvram @@ -107,6 +107,14 @@ case "$(nvram get productid)" in nvram set lan_ifnames="eth1 eth2" nvram set wan_ifname="none" ;; + *) + # wl-500g defaults. these are placed here, because WL-HDD and WL-300g + # might have the same nvram settings. + [ "$(nvram get boardnum)" = "asusX" \ + -a "$(nvram get boardtype)" = "bcm94710dev" ] && { + nvram_default wan_device "eth1" + } + ;; esac # hacks for wap54g hardware @@ -130,21 +138,12 @@ esac nvram_default wl0id 0x4320 } -WAN_PROTO="$(nvram get wan_proto)" -[ "$WAN_PROTO" = "pptp" \ --o "$WAN_PROTO" = "pppoe" ] && { - WAN_IFNAME="$(nvram get wan_ifname)" - [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || { - nvram set wan_ifname=ppp0 - nvram set ${WAN_PROTO}_ifname="$WAN_IFNAME" - } -} - # defaults nvram_default lan_ifname "br0" nvram_default lan_ifnames "$FAILSAFE_ifnames" nvram_default wan_ifname "vlan1" +nvram_default wan_device "vlan1" nvram_default wan_proto "dhcp" nvram_default wl0_ssid OpenWrt @@ -152,6 +151,13 @@ nvram_default wl0_mode ap nvram_default wl0_infra 1 nvram_default wl0_radio 1 +WAN_PROTO="$(nvram get wan_proto)" +WAN_IFNAME="$(nvram get wan_ifname)" +case "$WAN_PROTO" in + pp*) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] || nvram set wan_ifname=ppp0;; + *) [ "${WAN_IFNAME%%[0-9]*}" = "ppp" ] && nvram set wan_ifname="$(nvram get wan_device)";; +esac + [ "$(nvram get il0macaddr)" = "00:90:4c:5f:00:2a" ] && { # if default wifi mac, set two higher than the lan mac nvram set il0macaddr=$(nvram get et0macaddr| diff --git a/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig b/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig index 0cafa17402..72d5b63ac7 100755 --- a/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig +++ b/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig @@ -57,9 +57,8 @@ END { # WAP54G if ((nvram["boardnum"] == "2") || \ (nvram["boardnum"] == "1024")) { - c["lan_ifnames"]="eth1 eth2" + c["lan_ifnames"]="eth0 eth1" c["wan_ifname"]="" - c["unused_ifnames"]="eth0" } print "#### VLAN configuration " @@ -79,7 +78,6 @@ END { print "# lan_gateway=\"192.168.1.1\"" print "" - p("unused_ifnames") print "" print "#### WAN configuration" @@ -90,10 +88,10 @@ END { print "# pppoe: PPP over Ethernet" print "# pptp: Point-to-Point tunneling Protocol" print "# for pppoe and pptp you need to use wan_ifname=\"ppp0\"" - print "# and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")" print "" print "wan_proto=dhcp" p("wan_ifname") + print "wan_device=\"" c["wan_ifname"] "\"" print "# wan_ipaddr=\"192.168.0.2\"" print "# wan_netmask=\"255.255.255.0\"" print "# wan_gateway=\"192.168.0.1\"" @@ -101,8 +99,6 @@ END { print "" print "## PPP over Ethernet and PPTP" print "# wan_ifname=\"ppp0\"" - print "# pppoe_ifname=\"" c["wan_ifname"] "\"" - print "# pptp_ifname=\"" c["wan_ifname"] "\"" print "# pptp_server_ip=\"192.168.0.1\"" } ' > /etc/config/network |