path: root/target/linux/sunxi/patches-3.14/210-mfd-add-axp20x-pmic-driver.patch

From 509326e0138b762067904c0c60f818e9bdba4cd4 Mon Sep 17 00:00:00 2001
From: Carlo Caione <carlo@caione.org>
Date: Sat, 1 Mar 2014 17:45:46 +0100
Subject: [PATCH] mfd: AXP20x: Add mfd driver for AXP20x PMIC

This patch introduces the preliminary support for PMICs X-Powers AXP202
and AXP209. The AXP209 and AXP202 are the PMUs (Power Management Unit)
used by A10, A13 and A20 SoCs and developed by X-Powers, a sister company
of Allwinner.

The core enables support for two subsystems:
- PEK (Power Enable Key)
- Regulators

Signed-off-by: Carlo Caione <carlo@caione.org>
---
 arch/arm/configs/sunxi_defconfig |   1 +
 drivers/mfd/Kconfig              |  12 ++
 drivers/mfd/Makefile             |   1 +
 drivers/mfd/axp20x.c             | 250 +++++++++++++++++++++++++++++++++++++++
 include/linux/mfd/axp20x.h       | 180 ++++++++++++++++++++++++++++
 5 files changed, 444 insertions(+)
 create mode 100644 drivers/mfd/axp20x.c
 create mode 100644 include/linux/mfd/axp20x.h

--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -55,6 +55,7 @@ CONFIG_GPIO_SYSFS=y
 # CONFIG_HWMON is not set
 CONFIG_WATCHDOG=y
 CONFIG_SUNXI_WATCHDOG=y
+CONFIG_MFD_AXP20X=y
 # CONFIG_USB_SUPPORT is not set
 CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -59,6 +59,18 @@ config MFD_AAT2870_CORE
 	  additional drivers must be enabled in order to use the
 	  functionality of the device.
 
+config MFD_AXP20X
+	bool "X-Powers AXP20X"
+	select MFD_CORE
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	depends on I2C=y
+	help
+	  If you say Y here you get support for the AXP20X.
+	  This driver provides common support for accessing the device,
+	  additional drivers must be enabled in order to use the
+	  functionality of the device.
+
 config MFD_CROS_EC
 	tristate "ChromeOS Embedded Controller"
 	select MFD_CORE
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -101,6 +101,7 @@ obj-$(CONFIG_PMIC_DA9052)	+= da9052-irq.
 obj-$(CONFIG_PMIC_DA9052)	+= da9052-core.o
 obj-$(CONFIG_MFD_DA9052_SPI)	+= da9052-spi.o
 obj-$(CONFIG_MFD_DA9052_I2C)	+= da9052-i2c.o
+obj-$(CONFIG_MFD_AXP20X)	+= axp20x.o
 
 obj-$(CONFIG_MFD_LP3943)	+= lp3943.o
 obj-$(CONFIG_MFD_LP8788)	+= lp8788.o lp8788-irq.o
--- /dev/null
+++ b/drivers/mfd/axp20x.c
@@ -0,0 +1,250 @@
+/*
+ * axp20x.c - mfd core driver for the X-Powers AXP202 and AXP209
+ *
+ * Author: Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/regulator/consumer.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/mfd/core.h>
+#include <linux/of_device.h>
+#include <linux/of_irq.h>
+
+#define AXP20X_OFF	0x80
+
+static const struct regmap_range axp20x_writeable_ranges[] = {
+	regmap_reg_range(AXP20X_DATACACHE(0), AXP20X_IRQ5_STATE),
+	regmap_reg_range(AXP20X_DCDC_MODE, AXP20X_FG_RES),
+};
+
+static const struct regmap_range axp20x_volatile_ranges[] = {
+	regmap_reg_range(AXP20X_IRQ1_EN, AXP20X_IRQ5_STATE),
+};
+
+static const struct regmap_access_table axp20x_writeable_table = {
+	.yes_ranges	= axp20x_writeable_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp20x_writeable_ranges),
+};
+
+static const struct regmap_access_table axp20x_volatile_table = {
+	.yes_ranges	= axp20x_volatile_ranges,
+	.n_yes_ranges	= ARRAY_SIZE(axp20x_volatile_ranges),
+};
+
+static struct resource axp20x_pek_resources[] = {
+	{
+		.name	= "PEK_DBR",
+		.start	= AXP20X_IRQ_PEK_RIS_EDGE,
+		.end	= AXP20X_IRQ_PEK_RIS_EDGE,
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "PEK_DBF",
+		.start	= AXP20X_IRQ_PEK_FAL_EDGE,
+		.end	= AXP20X_IRQ_PEK_FAL_EDGE,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct regmap_config axp20x_regmap_config = {
+	.reg_bits	= 8,
+	.val_bits	= 8,
+	.wr_table	= &axp20x_writeable_table,
+	.volatile_table	= &axp20x_volatile_table,
+	.max_register	= AXP20X_FG_RES,
+	.cache_type	= REGCACHE_RBTREE,
+};
+
+#define AXP20X_IRQ(_irq, _off, _mask) \
+	[AXP20X_IRQ_##_irq] = { .reg_offset = (_off), .mask = BIT(_mask) }
+
+static const struct regmap_irq axp20x_regmap_irqs[] = {
+	AXP20X_IRQ(ACIN_OVER_V,		0, 7),
+	AXP20X_IRQ(ACIN_PLUGIN,		0, 6),
+	AXP20X_IRQ(ACIN_REMOVAL,	0, 5),
+	AXP20X_IRQ(VBUS_OVER_V,		0, 4),
+	AXP20X_IRQ(VBUS_PLUGIN,		0, 3),
+	AXP20X_IRQ(VBUS_REMOVAL,	0, 2),
+	AXP20X_IRQ(VBUS_V_LOW,		0, 1),
+	AXP20X_IRQ(BATT_PLUGIN,		1, 7),
+	AXP20X_IRQ(BATT_REMOVAL,	1, 6),
+	AXP20X_IRQ(BATT_ENT_ACT_MODE,	1, 5),
+	AXP20X_IRQ(BATT_EXIT_ACT_MODE,	1, 4),
+	AXP20X_IRQ(CHARG,		1, 3),
+	AXP20X_IRQ(CHARG_DONE,		1, 2),
+	AXP20X_IRQ(BATT_TEMP_HIGH,	1, 1),
+	AXP20X_IRQ(BATT_TEMP_LOW,	1, 0),
+	AXP20X_IRQ(DIE_TEMP_HIGH,	2, 7),
+	AXP20X_IRQ(CHARG_I_LOW,		2, 6),
+	AXP20X_IRQ(DCDC1_V_LONG,	2, 5),
+	AXP20X_IRQ(DCDC2_V_LONG,	2, 4),
+	AXP20X_IRQ(DCDC3_V_LONG,	2, 3),
+	AXP20X_IRQ(PEK_SHORT,		2, 1),
+	AXP20X_IRQ(PEK_LONG,		2, 0),
+	AXP20X_IRQ(N_OE_PWR_ON,		3, 7),
+	AXP20X_IRQ(N_OE_PWR_OFF,	3, 6),
+	AXP20X_IRQ(VBUS_VALID,		3, 5),
+	AXP20X_IRQ(VBUS_NOT_VALID,	3, 4),
+	AXP20X_IRQ(VBUS_SESS_VALID,	3, 3),
+	AXP20X_IRQ(VBUS_SESS_END,	3, 2),
+	AXP20X_IRQ(LOW_PWR_LVL1,	3, 1),
+	AXP20X_IRQ(LOW_PWR_LVL2,	3, 0),
+	AXP20X_IRQ(TIMER,		4, 7),
+	AXP20X_IRQ(PEK_RIS_EDGE,	4, 6),
+	AXP20X_IRQ(PEK_FAL_EDGE,	4, 5),
+	AXP20X_IRQ(GPIO3_INPUT,		4, 3),
+	AXP20X_IRQ(GPIO2_INPUT,		4, 2),
+	AXP20X_IRQ(GPIO1_INPUT,		4, 1),
+	AXP20X_IRQ(GPIO0_INPUT,		4, 0),
+};
+
+static const struct regmap_irq_chip axp20x_regmap_irq_chip = {
+	.name			= "axp20x_irq_chip",
+	.status_base		= AXP20X_IRQ1_STATE,
+	.ack_base		= AXP20X_IRQ1_STATE,
+	.mask_base		= AXP20X_IRQ1_EN,
+	.num_regs		= 5,
+	.irqs			= axp20x_regmap_irqs,
+	.num_irqs		= ARRAY_SIZE(axp20x_regmap_irqs),
+	.mask_invert		= true,
+	.init_ack_masked	= true,
+};
+
+static struct mfd_cell axp20x_cells[] = {
+	{
+		.name		= "axp20x-pek",
+		.of_compatible	= "x-powers,axp20x-pek",
+		.num_resources	= ARRAY_SIZE(axp20x_pek_resources),
+		.resources	= axp20x_pek_resources,
+	}, {
+		.name		= "axp20x-regulator",
+	},
+};
+
+const struct of_device_id axp20x_of_match[] = {
+	{ .compatible = "x-powers,axp202", .data = (void *) AXP202_ID },
+	{ .compatible = "x-powers,axp209", .data = (void *) AXP209_ID },
+	{ },
+};
+
+static struct axp20x_dev *axp20x_pm_power_off;
+static void axp20x_power_off(void)
+{
+	regmap_write(axp20x_pm_power_off->regmap, AXP20X_OFF_CTRL,
+		     AXP20X_OFF);
+}
+
+static int axp20x_i2c_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+{
+	struct axp20x_dev *axp20x;
+	const struct of_device_id *of_id;
+	struct device_node *node = i2c->dev.of_node;
+	int ret;
+
+	axp20x = devm_kzalloc(&i2c->dev, sizeof(*axp20x), GFP_KERNEL);
+	if (!axp20x)
+		return -ENOMEM;
+
+	of_id = of_match_device(axp20x_of_match, &i2c->dev);
+	if (!of_id) {
+		dev_err(&i2c->dev, "Unable to setup AXP20X data\n");
+		return -ENODEV;
+	}
+	axp20x->variant = (int) of_id->data;
+
+	axp20x->i2c_client = i2c;
+	axp20x->dev = &i2c->dev;
+	dev_set_drvdata(axp20x->dev, axp20x);
+
+	axp20x->regmap = devm_regmap_init_i2c(i2c, &axp20x_regmap_config);
+	if (IS_ERR(axp20x->regmap)) {
+		ret = PTR_ERR(axp20x->regmap);
+		dev_err(&i2c->dev, "regmap init failed: %d\n", ret);
+		return ret;
+	}
+
+	axp20x->irq = i2c->irq;
+	ret = regmap_add_irq_chip(axp20x->regmap, axp20x->irq,
+				  IRQF_ONESHOT | IRQF_SHARED, -1,
+				  &axp20x_regmap_irq_chip,
+				  &axp20x->regmap_irqc);
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add irq chip: %d\n", ret);
+		return ret;
+	}
+
+	ret = mfd_add_devices(axp20x->dev, -1, axp20x_cells,
+			      ARRAY_SIZE(axp20x_cells), NULL, 0, NULL);
+	if (ret) {
+		dev_err(&i2c->dev, "failed to add MFD devices: %d\n", ret);
+		goto mfd_err;
+	}
+
+	axp20x->pm_off = of_property_read_bool(node, "axp,system-power-controller");
+
+	if (axp20x->pm_off && !pm_power_off) {
+		axp20x_pm_power_off = axp20x;
+		pm_power_off = axp20x_power_off;
+	}
+
+	dev_info(&i2c->dev, "AXP20X driver loaded\n");
+
+	return 0;
+
+mfd_err:
+	regmap_del_irq_chip(axp20x->irq, axp20x->regmap_irqc);
+
+	return ret;
+}
+
+static int axp20x_i2c_remove(struct i2c_client *i2c)
+{
+	struct axp20x_dev *axp20x = i2c_get_clientdata(i2c);
+
+	if (axp20x == axp20x_pm_power_off) {
+		axp20x_pm_power_off = NULL;
+		pm_power_off = NULL;
+	}
+
+	mfd_remove_devices(axp20x->dev);
+	regmap_del_irq_chip(axp20x->i2c_client->irq, axp20x->regmap_irqc);
+
+	return 0;
+}
+
+static const struct i2c_device_id axp20x_i2c_id[] = {
+	{ "axp202", AXP202_ID },
+	{ "axp209", AXP209_ID },
+	{ }
+};
+MODULE_DEVICE_TABLE(i2c, axp20x_i2c_id);
+
+static struct i2c_driver axp20x_i2c_driver = {
+	.driver = {
+		.name	= "axp20x",
+		.owner	= THIS_MODULE,
+		.of_match_table	= of_match_ptr(axp20x_of_match),
+	},
+	.probe		= axp20x_i2c_probe,
+	.remove		= axp20x_i2c_remove,
+	.id_table	= axp20x_i2c_id,
+};
+
+module_i2c_driver(axp20x_i2c_driver);
+
+MODULE_DESCRIPTION("PMIC MFD core driver for AXP20X");
+MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
+MODULE_LICENSE("GPL");
--- /dev/null
+++ b/include/linux/mfd/axp20x.h
@@ -0,0 +1,180 @@
+/*
+ * Functions to access AXP20X power management chip.
+ *
+ * Copyright (C) 2013, Carlo Caione <carlo@caione.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __LINUX_MFD_AXP20X_H
+#define __LINUX_MFD_AXP20X_H
+
+#define AXP202_ID			0
+#define AXP209_ID			1
+
+#define AXP20X_DATACACHE(m)		(0x04 + (m))
+
+/* Power supply */
+#define AXP20X_PWR_INPUT_STATUS		0x00
+#define AXP20X_PWR_OP_MODE		0x01
+#define AXP20X_USB_OTG_STATUS		0x02
+#define AXP20X_PWR_OUT_CTRL		0x12
+#define AXP20X_DCDC2_V_OUT		0x23
+#define AXP20X_DCDC2_LDO3_V_SCAL	0x25
+#define AXP20X_DCDC3_V_OUT		0x27
+#define AXP20X_LDO24_V_OUT		0x28
+#define AXP20X_LDO3_V_OUT		0x29
+#define AXP20X_VBUS_IPSOUT_MGMT		0x30
+#define AXP20X_V_OFF			0x31
+#define AXP20X_OFF_CTRL			0x32
+#define AXP20X_CHRG_CTRL1		0x33
+#define AXP20X_CHRG_CTRL2		0x34
+#define AXP20X_CHRG_BAK_CTRL		0x35
+#define AXP20X_PEK_KEY			0x36
+#define AXP20X_DCDC_FREQ		0x37
+#define AXP20X_V_LTF_CHRG		0x38
+#define AXP20X_V_HTF_CHRG		0x39
+#define AXP20X_APS_WARN_L1		0x3a
+#define AXP20X_APS_WARN_L2		0x3b
+#define AXP20X_V_LTF_DISCHRG		0x3c
+#define AXP20X_V_HTF_DISCHRG		0x3d
+
+/* Interrupt */
+#define AXP20X_IRQ1_EN			0x40
+#define AXP20X_IRQ2_EN			0x41
+#define AXP20X_IRQ3_EN			0x42
+#define AXP20X_IRQ4_EN			0x43
+#define AXP20X_IRQ5_EN			0x44
+#define AXP20X_IRQ1_STATE		0x48
+#define AXP20X_IRQ2_STATE		0x49
+#define AXP20X_IRQ3_STATE		0x4a
+#define AXP20X_IRQ4_STATE		0x4b
+#define AXP20X_IRQ5_STATE		0x4c
+
+/* ADC */
+#define AXP20X_ACIN_V_ADC_H		0x56
+#define AXP20X_ACIN_V_ADC_L		0x57
+#define AXP20X_ACIN_I_ADC_H		0x58
+#define AXP20X_ACIN_I_ADC_L		0x59
+#define AXP20X_VBUS_V_ADC_H		0x5a
+#define AXP20X_VBUS_V_ADC_L		0x5b
+#define AXP20X_VBUS_I_ADC_H		0x5c
+#define AXP20X_VBUS_I_ADC_L		0x5d
+#define AXP20X_TEMP_ADC_H		0x5e
+#define AXP20X_TEMP_ADC_L		0x5f
+#define AXP20X_TS_IN_H			0x62
+#define AXP20X_TS_IN_L			0x63
+#define AXP20X_GPIO0_V_ADC_H		0x64
+#define AXP20X_GPIO0_V_ADC_L		0x65
+#define AXP20X_GPIO1_V_ADC_H		0x66
+#define AXP20X_GPIO1_V_ADC_L		0x67
+#define AXP20X_PWR_BATT_H		0x70
+#define AXP20X_PWR_BATT_M		0x71
+#define AXP20X_PWR_BATT_L		0x72
+#define AXP20X_BATT_V_H			0x78
+#define AXP20X_BATT_V_L			0x79
+#define AXP20X_BATT_CHRG_I_H		0x7a
+#define AXP20X_BATT_CHRG_I_L		0x7b
+#define AXP20X_BATT_DISCHRG_I_H		0x7c
+#define AXP20X_BATT_DISCHRG_I_L		0x7d
+#define AXP20X_IPSOUT_V_HIGH_H		0x7e
+#define AXP20X_IPSOUT_V_HIGH_L		0x7f
+
+/* Power supply */
+#define AXP20X_DCDC_MODE		0x80
+#define AXP20X_ADC_EN1			0x82
+#define AXP20X_ADC_EN2			0x83
+#define AXP20X_ADC_RATE			0x84
+#define AXP20X_GPIO10_IN_RANGE		0x85
+#define AXP20X_GPIO1_ADC_IRQ_RIS	0x86
+#define AXP20X_GPIO1_ADC_IRQ_FAL	0x87
+#define AXP20X_TIMER_CTRL		0x8a
+#define AXP20X_VBUS_MON			0x8b
+#define AXP20X_OVER_TMP			0x8f
+
+/* GPIO */
+#define AXP20X_GPIO0_CTRL		0x90
+#define AXP20X_LDO5_V_OUT		0x91
+#define AXP20X_GPIO1_CTRL		0x92
+#define AXP20X_GPIO2_CTRL		0x93
+#define AXP20X_GPIO20_SS		0x94
+#define AXP20X_GPIO3_CTRL		0x95
+
+/* Battery */
+#define AXP20X_CHRG_CC_31_24		0xb0
+#define AXP20X_CHRG_CC_23_16		0xb1
+#define AXP20X_CHRG_CC_15_8		0xb2
+#define AXP20X_CHRG_CC_7_0		0xb3
+#define AXP20X_DISCHRG_CC_31_24		0xb4
+#define AXP20X_DISCHRG_CC_23_16		0xb5
+#define AXP20X_DISCHRG_CC_15_8		0xb6
+#define AXP20X_DISCHRG_CC_7_0		0xb7
+#define AXP20X_CC_CTRL			0xb8
+#define AXP20X_FG_RES			0xb9
+
+/* Regulators IDs */
+enum {
+	AXP20X_LDO1 = 0,
+	AXP20X_LDO2,
+	AXP20X_LDO3,
+	AXP20X_LDO4,
+	AXP20X_LDO5,
+	AXP20X_DCDC2,
+	AXP20X_DCDC3,
+	AXP20X_REG_ID_MAX,
+};
+
+/* IRQs */
+enum {
+	AXP20X_IRQ_ACIN_OVER_V = 1,
+	AXP20X_IRQ_ACIN_PLUGIN,
+	AXP20X_IRQ_ACIN_REMOVAL,
+	AXP20X_IRQ_VBUS_OVER_V,
+	AXP20X_IRQ_VBUS_PLUGIN,
+	AXP20X_IRQ_VBUS_REMOVAL,
+	AXP20X_IRQ_VBUS_V_LOW,
+	AXP20X_IRQ_BATT_PLUGIN,
+	AXP20X_IRQ_BATT_REMOVAL,
+	AXP20X_IRQ_BATT_ENT_ACT_MODE,
+	AXP20X_IRQ_BATT_EXIT_ACT_MODE,
+	AXP20X_IRQ_CHARG,
+	AXP20X_IRQ_CHARG_DONE,
+	AXP20X_IRQ_BATT_TEMP_HIGH,
+	AXP20X_IRQ_BATT_TEMP_LOW,
+	AXP20X_IRQ_DIE_TEMP_HIGH,
+	AXP20X_IRQ_CHARG_I_LOW,
+	AXP20X_IRQ_DCDC1_V_LONG,
+	AXP20X_IRQ_DCDC2_V_LONG,
+	AXP20X_IRQ_DCDC3_V_LONG,
+	AXP20X_IRQ_PEK_SHORT = 22,
+	AXP20X_IRQ_PEK_LONG,
+	AXP20X_IRQ_N_OE_PWR_ON,
+	AXP20X_IRQ_N_OE_PWR_OFF,
+	AXP20X_IRQ_VBUS_VALID,
+	AXP20X_IRQ_VBUS_NOT_VALID,
+	AXP20X_IRQ_VBUS_SESS_VALID,
+	AXP20X_IRQ_VBUS_SESS_END,
+	AXP20X_IRQ_LOW_PWR_LVL1,
+	AXP20X_IRQ_LOW_PWR_LVL2,
+	AXP20X_IRQ_TIMER,
+	AXP20X_IRQ_PEK_RIS_EDGE,
+	AXP20X_IRQ_PEK_FAL_EDGE,
+	AXP20X_IRQ_GPIO3_INPUT,
+	AXP20X_IRQ_GPIO2_INPUT,
+	AXP20X_IRQ_GPIO1_INPUT,
+	AXP20X_IRQ_GPIO0_INPUT,
+};
+
+struct axp20x_dev {
+	struct device			*dev;
+	struct i2c_client		*i2c_client;
+	struct regmap			*regmap;
+	struct regmap_irq_chip_data	*regmap_irqc;
+	int				variant;
+	int				irq;
+	bool				pm_off;
+};
+
+#endif /* __LINUX_MFD_AXP20X_H */