CFE from danitool [without hostTools dir]: https://mega.nz/#!mwZyFK7a!CPT3BKC8dEw29kubtdYxhB91G9vIIismTkgzQ3iUy3k

1 files changed, 129 insertions, 0 deletions

diff --git a/uclibc-crosstools-gcc-4.4.2-1/usr/include/linux/virtio_net.h b/uclibc-crosstools-gcc-4.4.2-1/usr/include/linux/virtio_net.h
new file mode 100644
index 0000000..cec79ad
--- /dev/null
+++ b/uclibc-crosstools-gcc-4.4.2-1/usr/include/linux/virtio_net.h
@@ -0,0 +1,129 @@
+#ifndef _LINUX_VIRTIO_NET_H
+#define _LINUX_VIRTIO_NET_H
+/* This header is BSD licensed so anyone can use the definitions to implement
+ * compatible drivers/servers. */
+#include <linux/types.h>
+#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
+
+/* The ID for virtio_net */
+#define VIRTIO_ID_NET	1
+
+/* The feature bitmap for virtio net */
+#define VIRTIO_NET_F_CSUM	0	/* Host handles pkts w/ partial csum */
+#define VIRTIO_NET_F_GUEST_CSUM	1	/* Guest handles pkts w/ partial csum */
+#define VIRTIO_NET_F_MAC	5	/* Host has given MAC address. */
+#define VIRTIO_NET_F_GSO	6	/* Host handles pkts w/ any GSO type */
+#define VIRTIO_NET_F_GUEST_TSO4	7	/* Guest can handle TSOv4 in. */
+#define VIRTIO_NET_F_GUEST_TSO6	8	/* Guest can handle TSOv6 in. */
+#define VIRTIO_NET_F_GUEST_ECN	9	/* Guest can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_GUEST_UFO	10	/* Guest can handle UFO in. */
+#define VIRTIO_NET_F_HOST_TSO4	11	/* Host can handle TSOv4 in. */
+#define VIRTIO_NET_F_HOST_TSO6	12	/* Host can handle TSOv6 in. */
+#define VIRTIO_NET_F_HOST_ECN	13	/* Host can handle TSO[6] w/ ECN in. */
+#define VIRTIO_NET_F_HOST_UFO	14	/* Host can handle UFO in. */
+#define VIRTIO_NET_F_MRG_RXBUF	15	/* Host can merge receive buffers. */
+#define VIRTIO_NET_F_STATUS	16	/* virtio_net_config.status available */
+#define VIRTIO_NET_F_CTRL_VQ	17	/* Control channel available */
+#define VIRTIO_NET_F_CTRL_RX	18	/* Control channel RX mode support */
+#define VIRTIO_NET_F_CTRL_VLAN	19	/* Control channel VLAN filtering */
+
+#define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
+
+struct virtio_net_config
+{
+	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
+	__u8 mac[6];
+	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
+	__u16 status;
+} __attribute__((packed));
+
+/* This is the first element of the scatter-gather list.  If you don't
+ * specify GSO or CSUM features, you can simply ignore the header. */
+struct virtio_net_hdr
+{
+#define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
+	__u8 flags;
+#define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
+#define VIRTIO_NET_HDR_GSO_TCPV4	1	// GSO frame, IPv4 TCP (TSO)
+#define VIRTIO_NET_HDR_GSO_UDP		3	// GSO frame, IPv4 UDP (UFO)
+#define VIRTIO_NET_HDR_GSO_TCPV6	4	// GSO frame, IPv6 TCP
+#define VIRTIO_NET_HDR_GSO_ECN		0x80	// TCP has ECN set
+	__u8 gso_type;
+	__u16 hdr_len;		/* Ethernet + IP + tcp/udp hdrs */
+	__u16 gso_size;		/* Bytes to append to hdr_len per frame */
+	__u16 csum_start;	/* Position to start checksumming from */
+	__u16 csum_offset;	/* Offset after that to place checksum */
+};
+
+/* This is the version of the header to use when the MRG_RXBUF
+ * feature has been negotiated. */
+struct virtio_net_hdr_mrg_rxbuf {
+	struct virtio_net_hdr hdr;
+	__u16 num_buffers;	/* Number of merged rx buffers */
+};
+
+/*
+ * Control virtqueue data structures
+ *
+ * The control virtqueue expects a header in the first sg entry
+ * and an ack/status response in the last entry.  Data for the
+ * command goes in between.
+ */
+struct virtio_net_ctrl_hdr {
+	__u8 class;
+	__u8 cmd;
+} __attribute__((packed));
+
+typedef __u8 virtio_net_ctrl_ack;
+
+#define VIRTIO_NET_OK     0
+#define VIRTIO_NET_ERR    1
+
+/*
+ * Control the RX mode, ie. promisucous and allmulti.  PROMISC and
+ * ALLMULTI commands require an "out" sg entry containing a 1 byte
+ * state value, zero = disable, non-zero = enable.  These commands
+ * are supported with the VIRTIO_NET_F_CTRL_RX feature.
+ */
+#define VIRTIO_NET_CTRL_RX    0
+ #define VIRTIO_NET_CTRL_RX_PROMISC      0
+ #define VIRTIO_NET_CTRL_RX_ALLMULTI     1
+
+/*
+ * Control the MAC filter table.
+ *
+ * The MAC filter table is managed by the hypervisor, the guest should
+ * assume the size is infinite.  Filtering should be considered
+ * non-perfect, ie. based on hypervisor resources, the guest may
+ * received packets from sources not specified in the filter list.
+ *
+ * In addition to the class/cmd header, the TABLE_SET command requires
+ * two out scatterlists.  Each contains a 4 byte count of entries followed
+ * by a concatenated byte stream of the ETH_ALEN MAC addresses.  The
+ * first sg list contains unicast addresses, the second is for multicast.
+ * This functionality is present if the VIRTIO_NET_F_CTRL_RX feature
+ * is available.
+ */
+struct virtio_net_ctrl_mac {
+	__u32 entries;
+	__u8 macs[][ETH_ALEN];
+} __attribute__((packed));
+
+#define VIRTIO_NET_CTRL_MAC    1
+ #define VIRTIO_NET_CTRL_MAC_TABLE_SET        0
+
+/*
+ * Control VLAN filtering
+ *
+ * The VLAN filter table is controlled via a simple ADD/DEL interface.
+ * VLAN IDs not added may be filterd by the hypervisor.  Del is the
+ * opposite of add.  Both commands expect an out entry containing a 2
+ * byte VLAN ID.  VLAN filterting is available with the
+ * VIRTIO_NET_F_CTRL_VLAN feature bit.
+ */
+#define VIRTIO_NET_CTRL_VLAN       2
+ #define VIRTIO_NET_CTRL_VLAN_ADD             0
+ #define VIRTIO_NET_CTRL_VLAN_DEL             1
+
+#endif /* _LINUX_VIRTIO_NET_H */