diff options
Diffstat (limited to 'shared/opensource/include/bcm963xx/boardparms.h')
| -rwxr-xr-x | shared/opensource/include/bcm963xx/boardparms.h | 453 |
1 files changed, 453 insertions, 0 deletions
diff --git a/shared/opensource/include/bcm963xx/boardparms.h b/shared/opensource/include/bcm963xx/boardparms.h new file mode 100755 index 0000000..7fec91c --- /dev/null +++ b/shared/opensource/include/bcm963xx/boardparms.h @@ -0,0 +1,453 @@ +/* + Copyright 2000-2010 Broadcom Corporation + + Unless you and Broadcom execute a separate written software license + agreement governing use of this software, this software is licensed + to you under the terms of the GNU General Public License version 2 + (the “GPL”), available at http://www.broadcom.com/licenses/GPLv2.php, + with the following added to such license: + + As a special exception, the copyright holders of this software give + you permission to link this software with independent modules, and to + copy and distribute the resulting executable under terms of your + choice, provided that you also meet, for each linked independent + module, the terms and conditions of the license of that module. + An independent module is a module which is not derived from this + software. The special exception does not apply to any modifications + of the software. + + Notwithstanding the above, under no circumstances may you combine this + software in any way with any other Broadcom software provided under a + license other than the GPL, without Broadcom's express prior written + consent. +*/ + +/************************************************************************** + * File Name : boardparms.h + * + * Description: This file contains definitions and function prototypes for + * the BCM63xx board parameter access functions. + * + * Updates : 07/14/2003 Created. + ***************************************************************************/ + +#if !defined(_BOARDPARMS_H) +#define _BOARDPARMS_H + +#ifdef __cplusplus +extern "C" { +#endif + +/* Return codes. */ +#define BP_SUCCESS 0 +#define BP_BOARD_ID_NOT_FOUND 1 +#define BP_VALUE_NOT_DEFINED 2 +#define BP_BOARD_ID_NOT_SET 3 + +/* Values for EthernetMacInfo PhyType. */ +#define BP_ENET_NO_PHY 0 +#define BP_ENET_INTERNAL_PHY 1 +#define BP_ENET_EXTERNAL_SWITCH 2 +#define BP_ENET_SWITCH_VIA_INTERNAL_PHY 3 /* it is for cpu internal phy connects to port 4 of 5325e */ + +/* Values for EthernetMacInfo Configuration type. */ +#define BP_ENET_CONFIG_MDIO 0 /* Internal PHY, External PHY, Switch+(no GPIO, no SPI, no MDIO Pseudo phy */ +#define BP_ENET_CONFIG_MDIO_PSEUDO_PHY 1 +#define BP_ENET_CONFIG_SPI_SSB_0 2 +#define BP_ENET_CONFIG_SPI_SSB_1 3 +#define BP_ENET_CONFIG_SPI_SSB_2 4 +#define BP_ENET_CONFIG_SPI_SSB_3 5 +#define BP_ENET_CONFIG_MMAP 6 +#define BP_ENET_CONFIG_GPIO_MDIO 7 /* use GPIO to simulate MDC/MDIO */ + +/* Values for VoIPDSPInfo DSPType. */ +#define BP_VOIP_NO_DSP 0 +#define BP_VOIP_DSP 1 +#define BP_VOIP_MIPS 2 + +/* Values for GPIO pin assignments (AH = Active High, AL = Active Low). */ +#define BP_GPIO_NUM_MASK 0x00FF +#define BP_ACTIVE_MASK 0x8000 +#define BP_ACTIVE_HIGH 0x0000 +#define BP_ACTIVE_LOW 0x8000 +#define BP_GPIO_SERIAL 0x4000 + +#define BP_GPIO_0_AH (0) +#define BP_GPIO_0_AL (0 | BP_ACTIVE_LOW) +#define BP_GPIO_1_AH (1) +#define BP_GPIO_1_AL (1 | BP_ACTIVE_LOW) +#define BP_GPIO_2_AH (2) +#define BP_GPIO_2_AL (2 | BP_ACTIVE_LOW) +#define BP_GPIO_3_AH (3) +#define BP_GPIO_3_AL (3 | BP_ACTIVE_LOW) +#define BP_GPIO_4_AH (4) +#define BP_GPIO_4_AL (4 | BP_ACTIVE_LOW) +#define BP_GPIO_5_AH (5) +#define BP_GPIO_5_AL (5 | BP_ACTIVE_LOW) +#define BP_GPIO_6_AH (6) +#define BP_GPIO_6_AL (6 | BP_ACTIVE_LOW) +#define BP_GPIO_7_AH (7) +#define BP_GPIO_7_AL (7 | BP_ACTIVE_LOW) +#define BP_GPIO_8_AH (8) +#define BP_GPIO_8_AL (8 | BP_ACTIVE_LOW) +#define BP_GPIO_9_AH (9) +#define BP_GPIO_9_AL (9 | BP_ACTIVE_LOW) +#define BP_GPIO_10_AH (10) +#define BP_GPIO_10_AL (10 | BP_ACTIVE_LOW) +#define BP_GPIO_11_AH (11) +#define BP_GPIO_11_AL (11 | BP_ACTIVE_LOW) +#define BP_GPIO_12_AH (12) +#define BP_GPIO_12_AL (12 | BP_ACTIVE_LOW) +#define BP_GPIO_13_AH (13) +#define BP_GPIO_13_AL (13 | BP_ACTIVE_LOW) +#define BP_GPIO_14_AH (14) +#define BP_GPIO_14_AL (14 | BP_ACTIVE_LOW) +#define BP_GPIO_15_AH (15) +#define BP_GPIO_15_AL (15 | BP_ACTIVE_LOW) +#define BP_GPIO_16_AH (16) +#define BP_GPIO_16_AL (16 | BP_ACTIVE_LOW) +#define BP_GPIO_17_AH (17) +#define BP_GPIO_17_AL (17 | BP_ACTIVE_LOW) +#define BP_GPIO_18_AH (18) +#define BP_GPIO_18_AL (18 | BP_ACTIVE_LOW) +#define BP_GPIO_19_AH (19) +#define BP_GPIO_19_AL (19 | BP_ACTIVE_LOW) +#define BP_GPIO_20_AH (20) +#define BP_GPIO_20_AL (20 | BP_ACTIVE_LOW) +#define BP_GPIO_21_AH (21) +#define BP_GPIO_21_AL (21 | BP_ACTIVE_LOW) +#define BP_GPIO_22_AH (22) +#define BP_GPIO_22_AL (22 | BP_ACTIVE_LOW) +#define BP_GPIO_23_AH (23) +#define BP_GPIO_23_AL (23 | BP_ACTIVE_LOW) +#define BP_GPIO_24_AH (24) +#define BP_GPIO_24_AL (24 | BP_ACTIVE_LOW) +#define BP_GPIO_25_AH (25) +#define BP_GPIO_25_AL (25 | BP_ACTIVE_LOW) +#define BP_GPIO_26_AH (26) +#define BP_GPIO_26_AL (26 | BP_ACTIVE_LOW) +#define BP_GPIO_27_AH (27) +#define BP_GPIO_27_AL (27 | BP_ACTIVE_LOW) +#define BP_GPIO_28_AH (28) +#define BP_GPIO_28_AL (28 | BP_ACTIVE_LOW) +#define BP_GPIO_29_AH (29) +#define BP_GPIO_29_AL (29 | BP_ACTIVE_LOW) +#define BP_GPIO_30_AH (30) +#define BP_GPIO_30_AL (30 | BP_ACTIVE_LOW) +#define BP_GPIO_31_AH (31) +#define BP_GPIO_31_AL (31 | BP_ACTIVE_LOW) +#define BP_GPIO_32_AH (32) +#define BP_GPIO_32_AL (32 | BP_ACTIVE_LOW) +#define BP_GPIO_33_AH (33) +#define BP_GPIO_33_AL (33 | BP_ACTIVE_LOW) +#define BP_GPIO_34_AH (34) +#define BP_GPIO_34_AL (34 | BP_ACTIVE_LOW) +#define BP_GPIO_35_AH (35) +#define BP_GPIO_35_AL (35 | BP_ACTIVE_LOW) +#define BP_GPIO_36_AH (36) +#define BP_GPIO_36_AL (36 | BP_ACTIVE_LOW) +#define BP_GPIO_37_AH (37) +#define BP_GPIO_37_AL (37 | BP_ACTIVE_LOW) +#define BP_GPIO_38_AH (38) +#define BP_GPIO_38_AL (38 | BP_ACTIVE_LOW) +#define BP_GPIO_39_AH (39) +#define BP_GPIO_39_AL (39 | BP_ACTIVE_LOW) +#define BP_GPIO_40_AH (40) +#define BP_GPIO_40_AL (40 | BP_ACTIVE_LOW) +#define BP_GPIO_41_AH (41) +#define BP_GPIO_41_AL (41 | BP_ACTIVE_LOW) +#define BP_GPIO_42_AH (42) +#define BP_GPIO_42_AL (42 | BP_ACTIVE_LOW) +#define BP_GPIO_43_AH (43) +#define BP_GPIO_43_AL (43 | BP_ACTIVE_LOW) +#define BP_GPIO_44_AH (44) +#define BP_GPIO_44_AL (44 | BP_ACTIVE_LOW) +#define BP_GPIO_45_AH (45) +#define BP_GPIO_45_AL (45 | BP_ACTIVE_LOW) +#define BP_GPIO_46_AH (46) +#define BP_GPIO_46_AL (46 | BP_ACTIVE_LOW) +#define BP_GPIO_47_AH (47) +#define BP_GPIO_47_AL (47 | BP_ACTIVE_LOW) + +#define BP_SERIAL_GPIO_0_AH (0 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_0_AL (0 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_1_AH (1 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_1_AL (1 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_2_AH (2 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_2_AL (2 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_3_AH (3 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_3_AL (3 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_4_AH (4 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_4_AL (4 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_5_AH (5 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_5_AL (5 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_6_AH (6 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_6_AL (6 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_7_AH (7 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_7_AL (7 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_8_AH (8 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_8_AL (8 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_9_AH (9 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_9_AL (9 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_10_AH (10 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_10_AL (10 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_11_AH (11 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_11_AL (11 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_12_AH (12 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_12_AL (12 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_13_AH (13 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_13_AL (13 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_14_AH (14 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_14_AL (14 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_15_AH (15 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_15_AL (15 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_16_AH (16 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_16_AL (16 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_17_AH (17 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_17_AL (17 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_18_AH (18 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_18_AL (18 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_19_AH (19 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_19_AL (19 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_20_AH (20 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_20_AL (20 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_21_AH (21 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_21_AL (21 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_22_AH (22 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_22_AL (22 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) +#define BP_SERIAL_GPIO_23_AH (23 | BP_GPIO_SERIAL) +#define BP_SERIAL_GPIO_23_AL (23 | BP_GPIO_SERIAL | BP_ACTIVE_LOW) + +/* Values for external interrupt assignments. */ +#define BP_EXT_INTR_0 0 +#define BP_EXT_INTR_1 1 +#define BP_EXT_INTR_2 2 +#define BP_EXT_INTR_3 3 +#define BP_EXT_INTR_4 4 +#define BP_EXT_INTR_5 5 + +/* Values for chip select assignments. */ +#define BP_CS_0 0 +#define BP_CS_1 1 +#define BP_CS_2 2 +#define BP_CS_3 3 + +#define BP_OVERLAY_GPON_TX_EN_L (1<<0) +#define BP_OVERLAY_PCI (1<<0) +#define BP_OVERLAY_CB (1<<1) +#define BP_OVERLAY_SPI_EXT_CS (1<<2) +#define BP_OVERLAY_UART1 (1<<3) +#define BP_OVERLAY_PHY (1<<4) +#define BP_OVERLAY_SERIAL_LEDS (1<<5) +#define BP_OVERLAY_EPHY_LED_0 (1<<6) +#define BP_OVERLAY_EPHY_LED_1 (1<<7) +#define BP_OVERLAY_GPHY_LED_0 (1<<6) +#define BP_OVERLAY_GPHY_LED_1 (1<<7) +#define BP_OVERLAY_EPHY_LED_2 (1<<8) +#define BP_OVERLAY_EPHY_LED_3 (1<<9) +#define BP_OVERLAY_INET_LED (1<<10) +#define BP_OVERLAY_MOCA_LED (1<<11) +#define BP_OVERLAY_USB_LED (1<<12) +#define BP_OVERLAY_USB_DEVICE (1<<13) + +/* Value for GPIO and external interrupt fields that are not used. */ +#define BP_NOT_DEFINED 0xffff + +/* Maximum size of the board id string. */ +#define BP_BOARD_ID_LEN 16 + +/* Maximum number of Ethernet MACs. */ +#define BP_MAX_ENET_MACS 2 +#define BP_MAX_SWITCH_PORTS 8 +/* Maximum number of VoIP DSPs. */ +#define BP_MAX_VOIP_DSP 2 + +/* Wireless Antenna Settings. */ +#define BP_WLAN_ANT_MAIN 0 +#define BP_WLAN_ANT_AUX 1 +#define BP_WLAN_ANT_BOTH 3 + +/* Wireless FLAGS */ +#define BP_WLAN_MAC_ADDR_OVERRIDE 0x0001 /* use kerSysGetMacAddress for mac address */ +#define BP_WLAN_EXCLUDE_ONBOARD 0x0002 /* exclude onboard wireless */ +#define BP_WLAN_EXCLUDE_ONBOARD_FORCE 0x0004 /* force exclude onboard wireless even without addon card*/ +#define BP_WLAN_USE_OTP 0x0008 /* don't use sw srom map, may fall to OTP or uninitialzed */ + +#define BP_WLAN_NVRAM_NAME_LEN 16 +#define BP_WLAN_MAX_PATCH_ENTRY 32 + +/* AFE IDs */ +#define BP_AFE_DEFAULT 0 + +#define BP_AFE_CHIP_INT (1 << 28) +#define BP_AFE_CHIP_6505 (2 << 28) +#define BP_AFE_CHIP_6306 (3 << 28) + +#define BP_AFE_LD_ISIL1556 (1 << 21) +#define BP_AFE_LD_6301 (2 << 21) +#define BP_AFE_LD_6302 (3 << 21) + +#define BP_AFE_FE_ANNEXA (1 << 15) +#define BP_AFE_FE_ANNEXB (2 << 15) +#define BP_AFE_FE_ANNEXJ (3 << 15) + +#define BP_AFE_FE_AVMODE_COMBO (0 << 13) +#define BP_AFE_FE_AVMODE_ADSL (1 << 13) +#define BP_AFE_FE_AVMODE_VDSL (2 << 13) + +/* VDSL only */ +#define BP_AFE_FE_REV_ISIL_REV1 (1 << 8) +/* Combo */ +#define BP_AFE_FE_REV_6302_REV1 (1 << 8) +#define BP_AFE_FE_REV_6302_REV_7_12 (1 << 8) +#define BP_AFE_FE_REV_6302_REV_7_4 (2 << 8) + +#define BP_AFE_FE_REV_6302_REV_7_2_1 (3 << 8) +#define BP_AFE_FE_REV_6302_REV_7_2 (4 << 8) +#define BP_AFE_FE_REV_6302_REV_7_2_UR2 (5 << 8) +#define BP_AFE_FE_REV_6302_REV_7_2_2 (6 << 8) +/* ADSL only*/ +#define BP_AFE_FE_REV_6302_REV_5_2_1 (1 << 8) +#define BP_AFE_FE_REV_6302_REV_5_2_2 (2 << 8) +#define BP_AFE_FE_REV_6301_REV_5_1_1 (1 << 8) + +#define BP_GET_EXT_AFE_DEFINED + +#if !defined(__ASSEMBLER__) + +/* Information about Ethernet switch */ +typedef struct { + int port_map; + int phy_id[BP_MAX_SWITCH_PORTS]; +} ETHERNET_SW_INFO; + +/* WAN port flag in the phy_id of ETHERNET_SW_INFO */ +#define BCM_WAN_PORT 0x40 +#define IsWanPort(id) (((id) & BCM_WAN_PORT) && ((id) != 0xFF)) + +#define c0(n) (((n) & 0x55555555) + (((n) >> 1) & 0x55555555)) +#define c1(n) (((n) & 0x33333333) + (((n) >> 2) & 0x33333333)) +#define c2(n) (((n) & 0x0f0f0f0f) + (((n) >> 4) & 0x0f0f0f0f)) +#define bitcount(r, n) {r = n; r = c0(r); r = c1(r); r = c2(r); r %= 255;} + +/* Information about an Ethernet MAC. If ucPhyType is BP_ENET_NO_PHY, + * then the other fields are not valid. + */ +typedef struct EthernetMacInfo +{ + unsigned char ucPhyType; /* BP_ENET_xxx */ + unsigned char ucPhyAddress; /* 0 to 31 */ + unsigned short usGpioLedPhyLinkSpeed; /* GPIO pin or not defined */ + unsigned short usConfigType; /* Configuration type */ + ETHERNET_SW_INFO sw; /* switch information */ + unsigned short usGpioMDC; /* GPIO pin to simulate MDC */ + unsigned short usGpioMDIO; /* GPIO pin to simulate MDIO */ +} ETHERNET_MAC_INFO, *PETHERNET_MAC_INFO; + +typedef struct WlanSromEntry { + char name[BP_WLAN_NVRAM_NAME_LEN]; + unsigned short wordOffset; + unsigned short value; +} WLAN_SROM_ENTRY; + +typedef struct WlanSromPatchInfo { + char szboardId[BP_BOARD_ID_LEN]; + unsigned short usWirelessChipId; + unsigned short usNeededSize; + WLAN_SROM_ENTRY entries[BP_WLAN_MAX_PATCH_ENTRY]; +} WLAN_SROM_PATCH_INFO, *PWLAN_SROM_PATCH_INFO; + +typedef struct WlanPciEntry { + char name[BP_WLAN_NVRAM_NAME_LEN]; + unsigned int dwordOffset; + unsigned int value; +} WLAN_PCI_ENTRY; + +typedef struct WlanPciPatchInfo { + char szboardId[BP_BOARD_ID_LEN]; + unsigned int usWirelessPciId; + int usNeededSize; + WLAN_PCI_ENTRY entries[BP_WLAN_MAX_PATCH_ENTRY]; +} WLAN_PCI_PATCH_INFO, *PWLAN_PCI_PATCH_INFO; + +/* Information about VoIP DSPs. If ucDspType is BP_VOIP_NO_DSP, + * then the other fields are not valid. + */ +typedef struct VoIPDspInfo +{ + unsigned char ucDspType; + unsigned char ucDspAddress; + unsigned short usGpioLedVoip; + unsigned short usGpioVoip1Led; + unsigned short usGpioVoip1LedFail; + unsigned short usGpioVoip2Led; + unsigned short usGpioVoip2LedFail; + unsigned short usGpioPotsLed; + unsigned short usGpioDectLed; + +} VOIP_DSP_INFO; + +int BpSetBoardId( char *pszBoardId ); +int BpGetBoardId( char *pszBoardId); +int BpGetBoardIds( char *pszBoardIds, int nBoardIdsSize ); + +int BpGetGPIOverlays( unsigned short *pusValue ); + +int BpGetRj11InnerOuterPairGpios( unsigned short *pusInner, unsigned short *pusOuter ); +int BpGetRtsCtsUartGpios( unsigned short *pusRts, unsigned short *pusCts ); + +int BpGetAdslLedGpio( unsigned short *pusValue ); +int BpGetAdslFailLedGpio( unsigned short *pusValue ); +int BpGetSecAdslLedGpio( unsigned short *pusValue ); +int BpGetSecAdslFailLedGpio( unsigned short *pusValue ); +int BpGetWirelessSesLedGpio( unsigned short *pusValue ); +int BpGetHpnaLedGpio( unsigned short *pusValue ); +int BpGetWanDataLedGpio( unsigned short *pusValue ); +int BpGetWanErrorLedGpio( unsigned short *pusValue ); +int BpGetBootloaderPowerOnLedGpio( unsigned short *pusValue ); +int BpGetBootloaderStopLedGpio( unsigned short *pusValue ); +int BpGetFpgaResetGpio( unsigned short *pusValue ); +int BpGetGponLedGpio( unsigned short *pusValue ); +int BpGetGponFailLedGpio( unsigned short *pusValue ); +int BpGetMoCALedGpio( unsigned short *pusValue ); +int BpGetMoCAFailLedGpio( unsigned short *pusValue ); + +int BpGetResetToDefaultExtIntr( unsigned short *pusValue ); +int BpGetWirelessSesExtIntr( unsigned short *pusValue ); +int BpGetHpnaExtIntr( unsigned long *pulValue ); + +int BpGetHpnaChipSelect( unsigned long *pulValue ); + +int BpGetWirelessAntInUse( unsigned short *pusValue ); +int BpGetWirelessFlags( unsigned short *pusValue ); +int BpGetWirelessPowerDownGpio( unsigned short *pusValue ); +int BpUpdateWirelessSromMap(unsigned short chipID, unsigned short* pBase, int sizeInWords); +int BpUpdateWirelessPciConfig (unsigned long pciID, unsigned long* pBase, int sizeInDWords); + +int BpGetEthernetMacInfo( PETHERNET_MAC_INFO pEnetInfos, int nNumEnetInfos ); +int BpGet6829PortInfo( unsigned char *portInfo6829 ); +int BpGetDslPhyAfeIds( unsigned long *pulValues ); +int BpGetExtAFEResetGpio( unsigned short *pulValues ); +int BpGetExtAFELDPwrGpio( unsigned short *pulValues ); +int BpGetExtAFELDModeGpio( unsigned short *pulValues ); + +VOIP_DSP_INFO *BpGetVoipDspConfig( unsigned char dspNum ); +int BpGetVoipLedGpio( unsigned short *pusValue ); +int BpGetVoip1LedGpio( unsigned short *pusValue ); +int BpGetVoip1FailLedGpio( unsigned short *pusValue ); +int BpGetVoip2LedGpio( unsigned short *pusValue ); +int BpGetVoip2FailLedGpio( unsigned short *pusValue ); +int BpGetPotsLedGpio( unsigned short *pusValue ); +int BpGetDectLedGpio( unsigned short *pusValue ); + +int bpstrcmp(const char *dest,const char *src); + + +#endif /* __ASSEMBLER__ */ + +#ifdef __cplusplus +} +#endif + +#endif /* _BOARDPARMS_H */ + |