aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorGabor Juhos <juhosg@openwrt.org>2013-11-05 16:31:14 +0000
committerGabor Juhos <juhosg@openwrt.org>2013-11-05 16:31:14 +0000
commit08e061327571c8431afe1edd5ad418ef4c677315 (patch)
tree1d96fb1ee70a5cc758291acd41f2e8853cb66b87
parent2d31dc039ac69bca62edd9f915834f5e7ebe4d25 (diff)
downloadupstream-08e061327571c8431afe1edd5ad418ef4c677315.tar.gz
upstream-08e061327571c8431afe1edd5ad418ef4c677315.tar.bz2
upstream-08e061327571c8431afe1edd5ad418ef4c677315.zip
ar71xx: generate recovery image for WNDR4300
Extended the Makefile to generate a working factory reset image for Netgear WNDR4300. The image uses UBI with two volumes squashfs (rootfs) and JFFS2 (rootfs_data). In order to make stock U-Boot happy, a fake rootfs image is placed into the last erase block of the kernel partition. Signed-off-by: Stefan Agner <stefan@agner.ch> [juhosg: - restore the NetgearNAND/initramfs macro, - remove unused {Squash,Ubi}fsTemplate macros, - remove board specific mtd options from CONFIG_CMDLINE, append the board specific ubi.mtd parameter to the kernel command line instead, - increase kernel partition size to 2MiB, - use board specific ini file for ubinize, - put jffs2 eof mark into the rootfs_data ubi volume, - use KDIR_TMP for temporary images, - use the squashfs-raw image, - increase kernel partition size to 2MiB, - use a local ubinize macro, - fix macro parameter comments, - put the fake rootfs into the last erase block of the kernel partition, - move Image/Build/NetgearNAND/buildkernel macro before define Image/Build/NetgearNAND, - don't use the wndr3700 utility, use '-M' parameter of mkimage to set the uImage magic, - use '-recovery' suffix for the generated image, it is only usable via the fw_recovery function of the bootloader, - update commit log] Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 38655
-rw-r--r--target/linux/ar71xx/image/Makefile72
-rw-r--r--target/linux/ar71xx/image/ubinize-wndr4300.ini27
2 files changed, 97 insertions, 2 deletions
diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile
index b1909ddcc7..811da74bcf 100644
--- a/target/linux/ar71xx/image/Makefile
+++ b/target/linux/ar71xx/image/Makefile
@@ -144,6 +144,17 @@ Sysupgrade/KR=$(call CatFiles,$(2),$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,
Sysupgrade/KRuImage=$(call CatFiles,$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2)),$(5))
Sysupgrade/RKuImage=$(call CatFiles,$(KDIR)/root.$(1),$(4),$(KDIR_TMP)/vmlinux-$(2).uImage,$(3),$(call sysupname,$(1),$(2)))
+# $(1): ubinize ini file
+# $(2): working directory
+# $(3): output file
+# $(4): physical erase block size
+# $(5): minimum I/O unit size
+# $(6): custom options
+define ubinize
+ $(CP) $(1) $(2)
+ ( cd $(2); $(STAGING_DIR_HOST)/bin/ubinize -o $(3) -p $(4) -m $(5) $(6) $(1))
+endef
+
define Image/BuildLoader
-rm -rf $(KDIR)/lzma-loader
$(LOADER_MAKE) LOADER=loader-$(1).$(2) KERNEL_CMDLINE="$(3)"\
@@ -206,7 +217,7 @@ wnr2200_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmwa
wnr2000v3_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro
wndr3700_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,7680k(firmware),64k(art)ro
wndr3700v2_mtdlayout=mtdparts=spi0.0:320k(u-boot)ro,128k(u-boot-env)ro,15872k(firmware),64k(art)ro
-wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),1152k(kernel),24448k(rootfs),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved)
+wndr4300_mtdlayout=mtdparts=ar934x-nfc:256k(u-boot)ro,256k(u-boot-env)ro,256k(caldata),512k(pot),2048k(language),512k(config),3072k(traffic_meter),2048k(kernel),23552k(ubiroot),25600k@0x6c0000(firmware),256k(caldata_backup),-(reserved) ubi.mtd=ubiroot
zcn1523h_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,6208k(rootfs),1472k(kernel),64k(configure)ro,64k(mfg)ro,64k(art)ro,7680k@0x50000(firmware)
mynet_n600_mtdlayout=mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,64k(devdata)ro,64k(devconf)ro,15872k(firmware),64k(radiocfg)ro
@@ -717,6 +728,63 @@ endef
Image/Build/NetgearNAND/initramfs=$(call Image/Build/Netgear/initramfs,$(1),$(2),$(3),$(4),$(5))
+# $(1): (empty)
+# $(2): Board name (small caps)
+# $(3): Kernel board specific cmdline
+# $(4): Kernel mtdparts definition
+# $(5): U-Boot magic
+define Image/Build/NetgearNAND/buildkernel
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+ $(call PatchKernelLzma,$(2),$(3) $(4),-d20)
+ dd if=$(KDIR_TMP)/vmlinux-$(2).bin.lzma \
+ of=$(KDIR_TMP)/vmlinux-$(2).bin.tmp \
+ bs=$$$$(($(kernelsize)-131072-2*64-1)) \
+ count=1 conv=sync
+ $(call MkuImage,lzma,-M $(5),$(KDIR_TMP)/vmlinux-$(2).bin.tmp,$(KDIR_TMP)/vmlinux-$(2).uImage)
+ echo -ne '\xff' >> $(KDIR_TMP)/vmlinux-$(2).uImage
+ # create a fake rootfs image
+ dd if=/dev/zero of=$(KDIR_TMP)/fakeroot-$(2) bs=131072 count=1
+ mkimage -A mips -O linux -T filesystem -C none \
+ -a 0xbf070000 -e 0xbf070000 \
+ -n 'MIPS OpenWrt fakeroot' \
+ -d $(KDIR_TMP)/fakeroot-$(2) \
+ -M $(5) \
+ $(KDIR_TMP)/fakeroot-$(2).uImage
+ # append the fake rootfs image to the kernel, it will reside in the last
+ # erase block of the kernel partition
+ cat $(KDIR_TMP)/fakeroot-$(2).uImage >> $(KDIR_TMP)/vmlinux-$(2).uImage
+endef
+
+
+# $(1): rootfs image suffix
+# $(2): Board name (small caps)
+# $(3): Kernel board specific cmdline
+# $(4): Kernel mtdparts definition
+# $(5): U-Boot magic
+# $(6): Board name (upper caps)
+# $(7): firmware region code (not used yet)
+# $(8): DNI Hardware version
+define Image/Build/NetgearNAND
+ $(eval firmwaresize=$(call mtdpartsize,firmware,$(4)))
+ $(eval kernelsize=$(call mtdpartsize,kernel,$(4)))
+ $(eval imageraw=$(KDIR_TMP)/$(2)-raw.img)
+ $(CP) $(KDIR)/root.squashfs-raw $(KDIR_TMP)/root.squashfs
+ echo -ne '\xde\xad\xc0\xde' > $(KDIR_TMP)/jffs2.eof
+ $(call ubinize,ubinize-$(2).ini,$(KDIR_TMP),$(KDIR_TMP)/$(2)-root.ubi,128KiB,2048)
+ # Create firmware image full of 0xff to use the UBIFS auto-resize function
+ firmwareblocks=$$$$(($(firmwaresize) / 131072)); \
+ dd if=/dev/zero bs=128k count=$$$${firmwareblocks} conv=sync | tr '\000' '\377' > $(imageraw)
+ # Insert Kernel and UBI image to rootfs and generate DNI image
+ dd if=$(KDIR_TMP)/vmlinux-$(2).uImage of=$(imageraw) conv=notrunc
+ kernelblocks=$$$$(($(kernelsize) / 131072)); \
+ dd if=$(KDIR_TMP)/$(2)-root.ubi of=$(imageraw) bs=128k seek=$$$${kernelblocks} conv=notrunc
+ $(STAGING_DIR_HOST)/bin/mkdniimg \
+ -B $(6) -v OpenWrt.$(REVISION) -r "$$$$r" $(8) \
+ -i $(imageraw) \
+ -o $(call imgname,ubi,$(2))-recovery.img
+endef
+
+
ifdef CONFIG_PACKAGE_uboot-ar71xx-nbg460n_550n_550nh
Image/Build/ZyXEL/buildkernel=$(call MkuImageLzma,$(2),$(3))
@@ -1005,7 +1073,7 @@ $(eval $(call MultiProfile,Madwifi,EAP7660D UBNTRS UBNTRSPRO UBNTLSSR71 WP543))
endif # ifeq ($(SUBTARGET),generic)
ifeq ($(SUBTARGET),nand)
-$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),3703,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3))
+$(eval $(call SingleProfile,NetgearNAND,64k,WNDR4300,wndr4300,WNDR4300,ttyS0,115200,$$(wndr4300_mtdlayout),0x33373033,WNDR4300,"",-H 29763948+0+128+128+2x2+3x3))
endif # ifeq ($(SUBTARGET),nand)
diff --git a/target/linux/ar71xx/image/ubinize-wndr4300.ini b/target/linux/ar71xx/image/ubinize-wndr4300.ini
new file mode 100644
index 0000000000..c95c5e4b1e
--- /dev/null
+++ b/target/linux/ar71xx/image/ubinize-wndr4300.ini
@@ -0,0 +1,27 @@
+[rootfs]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=root.squashfs
+# Volume ID in UBI image
+vol_id=0
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs
+# Autoresize volume at first mount
+# vol_flags=autoresize
+
+[rootfs_data]
+# Volume mode (other option is static)
+mode=ubi
+# Source image
+image=jffs2.eof
+# Volume ID in UBI image
+vol_id=1
+# Allow for dynamic resize
+vol_type=dynamic
+# Volume name
+vol_name=rootfs_data
+# Autoresize volume at first mount
+vol_flags=autoresize