aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSven Eckelmann <sven@narfation.org>2020-11-23 13:41:34 +0100
committerPetr Štetiar <ynezz@true.cz>2020-12-22 19:11:50 +0100
commit17e592049005f3f7e65429966b21b2d834f9c2f0 (patch)
treeacc4acc061923a61d4874d66bd39055bf0d7a985
parent5fc28ef47959c1256f2553d507224bb481b08494 (diff)
downloadupstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.gz
upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.tar.bz2
upstream-17e592049005f3f7e65429966b21b2d834f9c2f0.zip
ath79: Add support for Plasma Cloud PA300E
Device specifications: * Qualcomm/Atheros QCA9533 v2 * 650/600/217 MHz (CPU/DDR/AHB) * 64 MB of RAM * 16 MB of SPI NOR flash (mx25l12805d) - 2x 7 MB available; but one of the 7 MB regions is the recovery image * 2x 10/100 Mbps Ethernet * 2T2R 2.4 GHz Wi-Fi * multi-color LED (controlled via red/green/blue GPIOs) * 1x GPIO-button (reset) * external h/w watchdog (enabled by default) * TTL pins are on board (arrow points to VCC, then follows: GND, TX, RX) * 2x fast ethernet - eth0 + Label: Ethernet 1 + 24V passive POE (mode B) + used as WAN interface - eth1 + Label: Ethernet 2 + 802.3af POE + builtin switch port 2 + used as LAN interface * 12-24V 1A DC * external antennas Flashing instructions: The tool ap51-flash (https://github.com/ap51-flash/ap51-flash) should be used to transfer the factory image to the u-boot when the device boots up. Signed-off-by: Sven Eckelmann <sven@narfation.org>
-rw-r--r--package/boot/uboot-envtools/files/ath793
-rw-r--r--target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts8
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh3
-rw-r--r--target/linux/ath79/generic/base-files/lib/upgrade/platform.sh3
-rw-r--r--target/linux/ath79/image/generic.mk6
6 files changed, 21 insertions, 3 deletions
diff --git a/package/boot/uboot-envtools/files/ath79 b/package/boot/uboot-envtools/files/ath79
index 40fbc96a07..496a27ceb2 100644
--- a/package/boot/uboot-envtools/files/ath79
+++ b/package/boot/uboot-envtools/files/ath79
@@ -81,7 +81,8 @@ netgear,wndr4300tn|\
netgear,wndr4300sw)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x20000"
;;
-plasmacloud,pa300)
+plasmacloud,pa300|\
+plasmacloud,pa300e)
ubootenv_add_uci_config "/dev/mtd1" "0x0" "0x40000" "0x40000"
;;
qihoo,c301)
diff --git a/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
new file mode 100644
index 0000000000..1527a796bb
--- /dev/null
+++ b/target/linux/ath79/dts/qca9533_plasmacloud_pa300e.dts
@@ -0,0 +1,8 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca9533_plasmacloud_pa300.dtsi"
+
+/ {
+ compatible = "plasmacloud,pa300e", "qca,qca9533";
+ model = "Plasma Cloud PA300E";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index f868d8dc94..ac1fc4406d 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -150,6 +150,7 @@ ath79_setup_interfaces()
comfast,cf-e314n-v2|\
compex,wpj531-16m|\
plasmacloud,pa300|\
+ plasmacloud,pa300e|\
tplink,cpe210-v1|\
tplink,cpe220-v2|\
tplink,cpe220-v3|\
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh
index 68733ccf15..002f5f9668 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/dualboot_datachk.sh
@@ -45,7 +45,8 @@ platform_do_upgrade_dualboot_datachk() {
# boot anymore to Linux until it was reflashed with ap51-flash.
local next_boot_part="1"
case "$(board_name)" in
- plasmacloud,pa300)
+ plasmacloud,pa300|\
+ plasmacloud,pa300e)
primary_kernel_mtd=3
;;
*)
diff --git a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
index 3ce273990f..98861685dc 100644
--- a/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ath79/generic/base-files/lib/upgrade/platform.sh
@@ -50,7 +50,8 @@ platform_do_upgrade() {
jjplus,ja76pf2)
redboot_fis_do_upgrade "$1" linux
;;
- plasmacloud,pa300)
+ plasmacloud,pa300|\
+ plasmacloud,pa300e)
PART_NAME="inactive"
platform_do_upgrade_dualboot_datachk "$1"
;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 935dee75d7..037d572d97 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -1597,6 +1597,12 @@ define Device/plasmacloud_pa300
endef
TARGET_DEVICES += plasmacloud_pa300
+define Device/plasmacloud_pa300e
+ $(Device/plasmacloud_pa300-common)
+ DEVICE_MODEL := PA300E
+endef
+TARGET_DEVICES += plasmacloud_pa300e
+
define Device/qihoo_c301
$(Device/seama)
SOC := ar9344