aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2019-03-21 15:55:09 +0100
committerPetr Štetiar <ynezz@true.cz>2019-03-29 07:34:00 +0000
commit3f019bf96cdf52668750f67cb139fa1b5c538f0b (patch)
treebac3ef1accb91a010a6adff664df8ace4a888b38
parent58becdb30d1048903ad704a227a52bdf695a0087 (diff)
downloadupstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.gz
upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.tar.bz2
upstream-3f019bf96cdf52668750f67cb139fa1b5c538f0b.zip
ramips: add Netgear EX6150
SoC: MediaTek MT7621 RAM: 64M (Winbond W9751G6KB-25) FLASH: 16MB (Macronix MX25L12835F) WiFi: MediaTek MT7662E bgn 2SS WiFi: MediaTek MT7662E nac 2SS BTN: ON/OFF - Reset - WPS - AP/Extender toggle LED: - Arrow Right (blue) - Arrow Left (blue) - WiFi 1 (red/green) - WiFi 2 (red/green) - Power (green/amber) - WPS (Green) UART: UART is present as Pads on the backside of the PCB. They are located on the other side of the Ethernet port. 3.3V - GND - TX - RX / 57600-8N1 3.3V is the nearest one to the antenna connectors Installation ------------ Update the factory image via the Netgear web-interfaces (by default: 192.168.1.250/24). You can also use the factory image with the nmrpflash tool. For more information see https://github.com/jclehner/nmrpflash Signed-off-by: David Bauer <mail@david-bauer.net> [merge conflict in 02_network, flash@0 node rename, wlan DTS triggers] Signed-off-by: Petr Štetiar <ynezz@true.cz>
-rwxr-xr-xtarget/linux/ramips/base-files/etc/board.d/02_network1
-rw-r--r--target/linux/ramips/dts/EX6150.dts247
-rw-r--r--target/linux/ramips/image/mt7621.mk11
3 files changed, 259 insertions, 0 deletions
diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network
index f9f1e208f6..2df9259021 100755
--- a/target/linux/ramips/base-files/etc/board.d/02_network
+++ b/target/linux/ramips/base-files/etc/board.d/02_network
@@ -366,6 +366,7 @@ ramips_setup_interfaces()
"0:lan:4" "1:lan:3" "2:lan:2" "3:lan:1" "5:wan" "6@eth0"
;;
dlink,dir-510l|\
+ netgear,ex6150|\
re350-v1)
ucidef_add_switch "switch0" \
"0:lan" "6@eth0"
diff --git a/target/linux/ramips/dts/EX6150.dts b/target/linux/ramips/dts/EX6150.dts
new file mode 100644
index 0000000000..729173bdd6
--- /dev/null
+++ b/target/linux/ramips/dts/EX6150.dts
@@ -0,0 +1,247 @@
+/dts-v1/;
+
+#include "mt7621.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ compatible = "netgear,ex6150", "mediatek,mt7621-soc";
+ model = "Netgear EX6150";
+
+ aliases {
+ led-boot = &power_green;
+ led-failsafe = &power_amber;
+ led-running = &power_green;
+ led-upgrade = &power_amber;
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x4000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,57600";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ power_amber: power_amber {
+ label = "ex6150:amber:power";
+ gpios = <&gpio0 15 GPIO_ACTIVE_LOW>;
+ };
+
+ power_green: power_green {
+ label = "ex6150:green:power";
+ gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
+ };
+
+ wps {
+ label = "ex6150:green:wps";
+ gpios = <&gpio0 16 GPIO_ACTIVE_LOW>;
+ };
+
+ rightarrow {
+ label = "ex6150:blue:rightarrow";
+ gpios = <&gpio0 28 GPIO_ACTIVE_LOW>;
+ };
+
+ leftarrow {
+ label = "ex6150:blue:leftarrow";
+ gpios = <&gpio0 31 GPIO_ACTIVE_LOW>;
+ };
+
+ router_green {
+ label = "ex6150:green:router";
+ gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy1tpt";
+ };
+
+ router_red {
+ label = "ex6150:red:router";
+ gpios = <&gpio0 30 GPIO_ACTIVE_LOW>;
+ };
+
+ client_green {
+ label = "ex6150:green:client";
+ gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+
+ client_red {
+ label = "ex6150:red:client";
+ gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys-polled";
+ poll-interval = <20>;
+
+ wps {
+ label = "wps";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_WPS_BUTTON>;
+ };
+
+ reset {
+ label = "reset";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RESTART>;
+ };
+
+ toggle {
+ label = "AP/Extender toggle";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+ linux,code = <BTN_0>;
+ /* Active when switch is set to "Access Point" */
+ };
+ };
+};
+
+&spi0 {
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x0 0x30000>;
+ read-only;
+ };
+
+ partition@30000 {
+ label = "config";
+ reg = <0x30000 0x10000>;
+ read-only;
+ };
+
+ factory: partition@40000 {
+ label = "factory";
+ reg = <0x40000 0x10000>;
+ read-only;
+ };
+
+ partition@50000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x50000 0xe80000>;
+ };
+
+ partition@ed0000 {
+ label = "ML1";
+ reg = <0xed0000 0x10000>;
+ read-only;
+ };
+
+ partition@ef0000 {
+ label = "ML2";
+ reg = <0xef0000 0x20000>;
+ read-only;
+ };
+
+ partition@f10000 {
+ label = "ML3";
+ reg = <0xf10000 0x20000>;
+ read-only;
+ };
+
+ partition@f30000 {
+ label = "ML4";
+ reg = <0xf30000 0x20000>;
+ read-only;
+ };
+
+ partition@f50000 {
+ label = "ML5";
+ reg = <0xf50000 0x20000>;
+ read-only;
+ };
+
+ partition@f70000 {
+ label = "ML6";
+ reg = <0xf70000 0x20000>;
+ read-only;
+ };
+
+ partition@f90000 {
+ label = "ML7";
+ reg = <0xf90000 0x20000>;
+ read-only;
+ };
+
+ partition@fb0000 {
+ label = "T_Meter1";
+ reg = <0xfb0000 0x10000>;
+ read-only;
+ };
+
+ partition@fc0000 {
+ label = "T_Meter2";
+ reg = <0xfc0000 0x10000>;
+ read-only;
+ };
+
+ partition@fd0000 {
+ label = "POT";
+ reg = <0xfd0000 0x10000>;
+ read-only;
+ };
+
+ partition@fe0000 {
+ label = "board_data";
+ reg = <0xfe0000 0x10000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "nvram";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pcie0 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x8000>;
+ ieee80211-freq-limit = <5000000 6000000>;
+ };
+};
+
+&pcie1 {
+ wifi@0,0 {
+ reg = <0x0000 0 0 0 0>;
+ mediatek,mtd-eeprom = <&factory 0x0000>;
+ ieee80211-freq-limit = <2400000 2500000>;
+ };
+};
+
+&ethernet {
+ mtd-mac-address = <&factory 0x00000004>;
+};
+
+&pinctrl {
+ state_default: pinctrl0 {
+ gpio {
+ ralink,group = "sdhci", "rgmii2", "jtag";
+ ralink,function = "gpio";
+ };
+ };
+};
diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk
index 1f514a6d04..b15dfacaf6 100644
--- a/target/linux/ramips/image/mt7621.mk
+++ b/target/linux/ramips/image/mt7621.mk
@@ -324,6 +324,17 @@ define Device/r6220
endef
TARGET_DEVICES += r6220
+define Device/netgear_ex6150
+ DTS := EX6150
+ DEVICE_TITLE := Netgear EX6150
+ DEVICE_PACKAGES := kmod-mt76x2 wpad-basic
+ NETGEAR_BOARD_ID := U12H318T00_NETGEAR
+ IMAGE_SIZE := 14848k
+ IMAGES += factory.chk
+ IMAGE/factory.chk := $$(sysupgrade_bin) | check-size $$$$(IMAGE_SIZE) | netgear-chk
+endef
+TARGET_DEVICES += netgear_ex6150
+
define Device/netgear_r6350
DTS := R6350
BLOCKSIZE := 128k