aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSebastian Schaper <openwrt@sebastianschaper.net>2020-12-02 21:31:19 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2021-01-04 01:09:32 +0100
commit5b58710fad2137eedad874f0fe8fe22082d1edc6 (patch)
tree2eba497da23bb277362e394cc45b7bc477892204
parentb077accb9c79f215d4da5f44474e72aec07e16dc (diff)
downloadupstream-5b58710fad2137eedad874f0fe8fe22082d1edc6.tar.gz
upstream-5b58710fad2137eedad874f0fe8fe22082d1edc6.tar.bz2
upstream-5b58710fad2137eedad874f0fe8fe22082d1edc6.zip
ath79: add support for D-Link DAP-2680 A1
Specifications: * QCA9558, 16 MiB Flash, 256 MiB RAM, 802.11n 3T3R * QCA9984, 802.11ac Wave 2 3T3R * Gigabit LAN Port (AR8035), 802.11at PoE Installation: * Factory Web UI is at 192.168.0.50 login with 'admin' and blank password, flash factory.bin * Recovery Web UI is at 192.168.0.50 connect network cable, hold reset button during power-on and keep it pressed until uploading has started (only required when checksum is ok, e.g. for reverting back to oem firmware), flash factory.bin After flashing factory.bin, additional free space can be reclaimed by flashing sysupgrade.bin, since the factory image requires some padding to be accepted for upgrading via OEM Web UI. Signed-off-by: Sebastian Schaper <openwrt@sebastianschaper.net>
-rw-r--r--target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts89
-rwxr-xr-xtarget/linux/ath79/generic/base-files/etc/board.d/02_network4
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata6
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac3
-rw-r--r--target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum1
-rw-r--r--target/linux/ath79/image/generic.mk12
6 files changed, 113 insertions, 2 deletions
diff --git a/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
new file mode 100644
index 0000000000..c3c82937a8
--- /dev/null
+++ b/target/linux/ath79/dts/qca9558_dlink_dap-2680-a1.dts
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qca955x.dtsi"
+#include "qca95xx_dlink_dap-2xxx.dtsi"
+
+/ {
+ compatible = "dlink,dap-2680-a1", "qca,qca9558";
+ model = "D-Link DAP-2680 A1";
+
+ aliases {
+ led-boot = &led_power_green;
+ led-failsafe = &led_power_red;
+ led-running = &led_power_green;
+ led-upgrade = &led_power_red;
+ };
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&gpio 18 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ led_power_red: power_red {
+ label = "red:power";
+ gpios = <&gpio 20 GPIO_ACTIVE_LOW>;
+ };
+
+ led_power_green: power_green {
+ label = "green:power";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ default-state = "on";
+ };
+ };
+};
+
+&partitions {
+ partition@70000 {
+ label = "firmware";
+ reg = <0x70000 0xee0000>;
+ compatible = "wrg";
+ };
+
+ partition@f50000 {
+ label = "dlink";
+ reg = <0xf50000 0xa0000>;
+ read-only;
+ };
+
+ art: partition@ff0000 {
+ label = "art";
+ reg = <0xff0000 0x10000>;
+ read-only;
+ };
+};
+
+&mdio0 {
+ status = "okay";
+
+ phy4: ethernet-phy@4 {
+ reg = <4>;
+ };
+};
+
+&eth0 {
+ status = "okay";
+
+ pll-data = <0x82000000 0x80000101 0x80001313>;
+
+ phy-handle = <&phy4>;
+ phy-mode = "rgmii-id";
+
+ gmac-config {
+ device = <&gmac>;
+ rgmii-enabled = <1>;
+ rxd-delay = <3>;
+ rxdv-delay = <3>;
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network
index 86c9a0b8d6..23b824d7e3 100755
--- a/target/linux/ath79/generic/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network
@@ -28,6 +28,7 @@ ath79_setup_interfaces()
dlink,dap-1330-a1|\
dlink,dap-1365-a1|\
dlink,dap-2230-a1|\
+ dlink,dap-2680-a1|\
dlink,dir-505|\
engenius,eap300-v2|\
engenius,eap350-v1|\
@@ -483,7 +484,8 @@ ath79_setup_macs()
label_mac=$lan_mac
;;
dlink,dap-2230-a1|\
- dlink,dap-2660-a1)
+ dlink,dap-2660-a1|\
+ dlink,dap-2680-a1)
lan_mac=$(mtd_get_mac_ascii bdcfg "lanmac")
label_mac=$lan_mac
;;
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index 3ab01afcf3..295bc1b180 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -174,6 +174,12 @@ case "$FIRMWARE" in
/lib/firmware/ath10k/QCA9888/hw2.0/board.bin
rm /lib/firmware/ath10k/QCA9888/hw2.0/board-2.bin
;;
+ dlink,dap-2680-a1)
+ caldata_extract "art" 0x5000 0x2f20
+ ath10k_patch_mac $(mtd_get_mac_ascii bdcfg wlanmac_a)
+ ln -sf /lib/firmware/ath10k/pre-cal-pci-0000\:00\:00.0.bin \
+ /lib/firmware/ath10k/QCA9888/hw2.0/board.bin
+ ;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
dlink,dir-842-c3)
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index c3dc2a8b5b..8923a2cb11 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -25,7 +25,8 @@ case "$board" in
dlink,dap-2230-a1)
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
- dlink,dap-2660-a1)
+ dlink,dap-2660-a1|\
+ dlink,dap-2680-a1)
[ "$PHYNBR" -eq 1 ] && \
mtd_get_mac_ascii bdcfg "wlanmac" > /sys${DEVPATH}/macaddress
;;
diff --git a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
index 9b98213022..0bbe321788 100644
--- a/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
+++ b/target/linux/ath79/generic/base-files/etc/uci-defaults/09_fix-checksum
@@ -15,6 +15,7 @@ board=$(board_name)
case "$board" in
dlink,dap-2230-a1|\
dlink,dap-2660-a1|\
+dlink,dap-2680-a1|\
dlink,dap-2695-a1)
fixwrgg
;;
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 080c6a1603..26ab0fcb34 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -772,6 +772,18 @@ define Device/dlink_dap-2660-a1
endef
TARGET_DEVICES += dlink_dap-2660-a1
+define Device/dlink_dap-2680-a1
+ $(Device/dlink_dap-2xxx)
+ SOC := qca9558
+ DEVICE_VENDOR := D-Link
+ DEVICE_MODEL := DAP-2680
+ DEVICE_VARIANT := A1
+ DEVICE_PACKAGES := ath10k-firmware-qca99x0-ct kmod-ath10k-ct
+ IMAGE_SIZE := 15232k
+ DAP_SIGNATURE := wapac36_dkbs_dap2680
+endef
+TARGET_DEVICES += dlink_dap-2680-a1
+
define Device/dlink_dap-2695-a1
SOC := qca9558
DEVICE_PACKAGES := ath10k-firmware-qca988x-ct kmod-ath10k-ct