aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPerry Melange <isprotejesvalkata@gmail.com>2019-08-07 19:25:13 +0200
committerDavid Bauer <mail@david-bauer.net>2019-08-07 21:17:40 +0200
commit796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95 (patch)
treefe459a659f69dbd28bee860efa758ce19e875a80
parentd7b4b5ec24184d322ccfc204c22120d5b4f02312 (diff)
downloadupstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.tar.gz
upstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.tar.bz2
upstream-796ad2f7ef6fefcf821a3b21cadfdb7ef3126e95.zip
ath79: add support for D-Link DIR-842 C3
Hardware spec of DIR-842 C3: SoC: QCA9563 DRAM: 128MB DDR2 Flash: 16MB SPI-NOR Switch: QCA8337N WiFi 5.8GHz: QCA9888 WiFi 2.4Ghz: QCA9563 USB: circuit onboard, but components are not soldered Flash instructions: 1. Upgrade the factory.bin through the factory web interface or the u-boot failsafe interface. The firmware will boot up correctly for the first time. Do not power off the device after OpenWrt has booted. Otherwise the u-boot will enter failsafe mode as the checksum of the firmware has been changed. 2. Upgrade the sysupgrade.bin in OpenWrt. After upgrading completes the u-boot won't complain about the firmware checksum and it's OK to use now. 3. If you powered off the device before upgrading the sysupgrade.bin, just upgrade the factory.bin through the u-boot failsafe interface and then goto step 2. Signed-off-by: Perry Melange <isprotejesvalkata@gmail.com>
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/01_leds1
-rwxr-xr-xtarget/linux/ath79/base-files/etc/board.d/02_network2
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom1
-rw-r--r--target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata1
-rw-r--r--target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts41
-rw-r--r--target/linux/ath79/image/generic.mk7
6 files changed, 53 insertions, 0 deletions
diff --git a/target/linux/ath79/base-files/etc/board.d/01_leds b/target/linux/ath79/base-files/etc/board.d/01_leds
index 35cb74db28..aad41b0dad 100755
--- a/target/linux/ath79/base-files/etc/board.d/01_leds
+++ b/target/linux/ath79/base-files/etc/board.d/01_leds
@@ -64,6 +64,7 @@ comfast,cf-e5)
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
+dlink,dir-842-c3|\
dlink,dir-859-a1)
ucidef_set_led_switch "internet" "WAN" "$boardname:green:internet" "switch0" "0x20"
;;
diff --git a/target/linux/ath79/base-files/etc/board.d/02_network b/target/linux/ath79/base-files/etc/board.d/02_network
index 9c6429984f..e3c1f423f1 100755
--- a/target/linux/ath79/base-files/etc/board.d/02_network
+++ b/target/linux/ath79/base-files/etc/board.d/02_network
@@ -123,6 +123,7 @@ ath79_setup_interfaces()
dlink,dir-835-a1|\
dlink,dir-842-c1|\
dlink,dir-842-c2|\
+ dlink,dir-842-c3|\
dlink,dir-859-a1|\
engenius,epg5000|\
tplink,archer-c2-v3|\
@@ -316,6 +317,7 @@ ath79_setup_macs()
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
+ dlink,dir-842-c3|\
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index a7d482580b..62d53248bc 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -107,6 +107,7 @@ case "$FIRMWARE" in
;;
dlink,dir-842-c1|\
dlink,dir-842-c2|\
+ dlink,dir-842-c3|\
dlink,dir-859-a1|\
nec,wg1200cr|\
wd,mynet-n750)
diff --git a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
index f6e2b801cb..501053e9d7 100644
--- a/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
+++ b/target/linux/ath79/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
@@ -191,6 +191,7 @@ case "$FIRMWARE" in
case $board in
dlink,dir-842-c1|\
dlink,dir-842-c2|\
+ dlink,dir-842-c3|\
nec,wg1200cr)
ath10kcal_extract "art" 20480 12064
ath10kcal_patch_mac_crc $(mtd_get_mac_ascii devdata wlan5mac)
diff --git a/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts
new file mode 100644
index 0000000000..2a15176a8a
--- /dev/null
+++ b/target/linux/ath79/dts/qca9563_dlink_dir-842-c3.dts
@@ -0,0 +1,41 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include "qca9563_dlink_dir-842-c.dtsi"
+
+/ {
+ compatible = "dlink,dir-842-c3", "qca,qca9563";
+ model = "D-Link DIR-842 C3";
+
+ aliases {
+ led-boot = &power;
+ led-failsafe = &power;
+ led-running = &power;
+ led-upgrade = &power;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "dir-842-c3:green:wps";
+ gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
+ };
+
+ power: power {
+ label = "dir-842-c3:green:power";
+ gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+ };
+
+ internet {
+ label = "dir-842-c3:green:internet";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+
+ wlan {
+ label = "dir-842-c3:green:wlan";
+ gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "phy0tpt";
+ };
+ };
+};
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 8009582778..abaf1a3e07 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -399,6 +399,13 @@ define Device/dlink_dir-842-c2
endef
TARGET_DEVICES += dlink_dir-842-c2
+define Device/dlink_dir-842-c3
+ $(Device/dlink_dir-842-c)
+ DEVICE_VARIANT := C3
+ DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct
+endef
+TARGET_DEVICES += dlink_dir-842-c3
+
define Device/elecom_wrc-1750ghbk2-i
ATH_SOC := qca9563
DEVICE_VENDOR := ELECOM