aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorPawel Dembicki <paweldembicki@gmail.com>2020-02-04 17:26:47 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-22 14:25:25 +0100
commitae67f5ffae69119eef6509a48b111164a5842346 (patch)
treeedd1669fd7decb13a724f5ffdba90db937c99ee1
parenta9b5473c92c01bce9b5f42659b0271bd141e3428 (diff)
downloadupstream-ae67f5ffae69119eef6509a48b111164a5842346.tar.gz
upstream-ae67f5ffae69119eef6509a48b111164a5842346.tar.bz2
upstream-ae67f5ffae69119eef6509a48b111164a5842346.zip
kirkwood: use generic diag.sh
This commit removes the target-specific diag.sh script. This way, the generic one is used for the target, which uses DT-aliases to specify the LEDs used. Generic diag.sh allow to use different LEDs to indicate different states. Non-red status LEDs for indicating boot and a running system. Where possible, the red or orange LEDs are used to indicate failsafe mode and a running upgrade. Compile-tested: all target devices. Run-tested: CheckPoint L-50 Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com> [remove unrelated cosmetic changes, rename some labels, add pogo_e02] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
-rwxr-xr-xtarget/linux/kirkwood/base-files/etc/diag.sh55
-rw-r--r--target/linux/kirkwood/patches-4.14/100-ib62x0.patch26
-rw-r--r--target/linux/kirkwood/patches-4.14/101-iconnect.patch33
-rw-r--r--target/linux/kirkwood/patches-4.14/102-dockstar.patch31
-rw-r--r--target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch37
-rw-r--r--target/linux/kirkwood/patches-4.14/104-ea3500.patch8
-rw-r--r--target/linux/kirkwood/patches-4.14/105-ea4500.patch28
-rw-r--r--target/linux/kirkwood/patches-4.14/105-goflexhome.patch14
-rw-r--r--target/linux/kirkwood/patches-4.14/106-goflexnet.patch31
-rw-r--r--target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch13
-rw-r--r--target/linux/kirkwood/patches-4.14/108-on100.patch14
-rw-r--r--target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch34
-rw-r--r--target/linux/kirkwood/patches-4.14/110-pogo_e02.patch31
-rw-r--r--target/linux/kirkwood/patches-4.19/100-ib62x0.patch26
-rw-r--r--target/linux/kirkwood/patches-4.19/101-iconnect.patch33
-rw-r--r--target/linux/kirkwood/patches-4.19/102-dockstar.patch31
-rw-r--r--target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch37
-rw-r--r--target/linux/kirkwood/patches-4.19/104-ea3500.patch8
-rw-r--r--target/linux/kirkwood/patches-4.19/105-ea4500.patch28
-rw-r--r--target/linux/kirkwood/patches-4.19/105-goflexhome.patch14
-rw-r--r--target/linux/kirkwood/patches-4.19/106-goflexnet.patch31
-rw-r--r--target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch13
-rw-r--r--target/linux/kirkwood/patches-4.19/108-on100.patch14
-rw-r--r--target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch34
-rw-r--r--target/linux/kirkwood/patches-4.19/110-pogo_e02.patch31
25 files changed, 542 insertions, 113 deletions
diff --git a/target/linux/kirkwood/base-files/etc/diag.sh b/target/linux/kirkwood/base-files/etc/diag.sh
deleted file mode 100755
index fc61846c11..0000000000
--- a/target/linux/kirkwood/base-files/etc/diag.sh
+++ /dev/null
@@ -1,55 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2014 OpenWrt.org
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-get_status_led() {
- case $(board_name) in
- cisco,on100)
- status_led="on100:green:health"
- ;;
- cloudengines,pogoe02)
- status_led="pogo_e02:orange:fault"
- ;;
- cloudengines,pogoplugv4)
- status_led="pogoplugv4:green:health"
- ;;
- iom,ix2-200)
- status_led="status:white:power_led"
- ;;
- linksys,audi)
- status_led="audi:green:power"
- ;;
- linksys,viper)
- status_led="viper:white:health"
- ;;
- seagate,dockstar|\
- seagate,goflexhome|\
- seagate,goflexnet)
- status_led="status:orange:fault"
- ;;
- zyxel,nsa310b)
- status_led="nsa310:green:sys"
- ;;
- esac
-}
-
-set_state() {
- get_status_led
-
- case "$1" in
- preinit)
- status_led_blink_preinit
- ;;
- failsafe)
- status_led_blink_failsafe
- ;;
- preinit_regular)
- status_led_blink_preinit_regular
- ;;
- done)
- status_led_on
- ;;
- esac
-}
diff --git a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
index d1a5aa7d3e..494540d730 100644
--- a/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
+++ b/target/linux/kirkwood/patches-4.14/100-ib62x0.patch
@@ -1,15 +1,37 @@
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -6,7 +6,7 @@
+@@ -6,7 +6,14 @@
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ aliases {
++ led-boot = &led_green_os;
++ led-failsafe = &led_red_os;
++ led-running = &led_green_os;
++ led-upgrade = &led_red_os;
++ };
memory {
device_type = "memory";
-@@ -118,13 +118,13 @@
+@@ -81,12 +88,11 @@
+ &pmx_led_usb_transfer>;
+ pinctrl-names = "default";
+
+- green-os {
++ led_green_os: green-os {
+ label = "ib62x0:green:os";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+- red-os {
++ led_red_os: red-os {
+ label = "ib62x0:red:os";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+@@ -118,13 +124,13 @@
};
partition@100000 {
diff --git a/target/linux/kirkwood/patches-4.14/101-iconnect.patch b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
index ab47b5a724..f36f50eae4 100644
--- a/target/linux/kirkwood/patches-4.14/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.14/101-iconnect.patch
@@ -1,6 +1,20 @@
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -16,8 +16,6 @@
+@@ -8,6 +8,13 @@
+ model = "Iomega Iconnect";
+ compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power_blue;
++ led-failsafe = &led_power_red;
++ led-running = &led_power_blue;
++ led-upgrade = &led_power_red;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -9,7 +23,22 @@
};
ocp@f1000000 {
-@@ -146,28 +144,23 @@
+@@ -89,12 +94,11 @@
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+- power-blue {
++ led_power_blue: power-blue {
+ label = "power:blue";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+- power-red {
++ led_power_red: power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+@@ -146,28 +150,23 @@
status = "okay";
partition@0 {
diff --git a/target/linux/kirkwood/patches-4.14/102-dockstar.patch b/target/linux/kirkwood/patches-4.14/102-dockstar.patch
index 7462b93e0c..fb05e469bc 100644
--- a/target/linux/kirkwood/patches-4.14/102-dockstar.patch
+++ b/target/linux/kirkwood/patches-4.14/102-dockstar.patch
@@ -1,6 +1,35 @@
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -78,18 +78,22 @@
+@@ -8,6 +8,13 @@
+ model = "Seagate FreeAgent Dockstar";
+ compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -42,12 +49,11 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -78,18 +84,22 @@
partition@0 {
label = "u-boot";
diff --git a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
index 9036ead951..73655e1293 100644
--- a/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
+++ b/target/linux/kirkwood/patches-4.14/103-iomega-ix2-200.patch
@@ -1,6 +1,39 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -186,18 +186,18 @@
+@@ -8,6 +8,13 @@
+ model = "Iomega StorCenter ix2-200";
+ compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_health;
++ led-running = &led_power;
++ led-upgrade = &led_health;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -127,16 +134,15 @@
+ &pmx_led_rebuild &pmx_led_health >;
+ pinctrl-names = "default";
+
+- power_led {
++ led_power: power_led {
+ label = "status:white:power_led";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+ rebuild_led {
+ label = "status:white:rebuild_led";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+- health_led {
++ led_health: health_led {
+ label = "status:red:health_led";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+@@ -186,18 +192,18 @@
};
partition@a0000 {
@@ -22,7 +55,7 @@
reg = <0x400000 0x1C00000>;
};
};
-@@ -211,7 +211,7 @@
+@@ -211,7 +217,7 @@
};
&eth0 {
diff --git a/target/linux/kirkwood/patches-4.14/104-ea3500.patch b/target/linux/kirkwood/patches-4.14/104-ea3500.patch
index 73bb252a79..2aef79035e 100644
--- a/target/linux/kirkwood/patches-4.14/104-ea3500.patch
+++ b/target/linux/kirkwood/patches-4.14/104-ea3500.patch
@@ -10,7 +10,7 @@
kirkwood-lsxhl.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,245 @@
+@@ -0,0 +1,249 @@
+/*
+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
+ *
@@ -39,6 +39,10 @@
+ };
+
+ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_power;
++ led-running = &led_power;
++ led-upgrade = &led_power;
+ serial0 = &uart0;
+ };
+
@@ -71,7 +75,7 @@
+ pinctrl-0 = < &pmx_led_green_power >;
+ pinctrl-names = "default";
+
-+ green-power {
++ led_power: power {
+ label = "audi:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/target/linux/kirkwood/patches-4.14/105-ea4500.patch b/target/linux/kirkwood/patches-4.14/105-ea4500.patch
index 6cc3de221b..0c2b30df0d 100644
--- a/target/linux/kirkwood/patches-4.14/105-ea4500.patch
+++ b/target/linux/kirkwood/patches-4.14/105-ea4500.patch
@@ -1,6 +1,26 @@
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -69,9 +69,18 @@
+@@ -26,6 +26,10 @@
+ };
+
+ aliases {
++ led-boot = &led_white_health;
++ led-failsafe = &led_white_health;
++ led-running = &led_white_health;
++ led-upgrade = &led_white_health;
+ serial0 = &uart0;
+ };
+
+@@ -58,7 +62,7 @@
+ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+ pinctrl-names = "default";
+
+- white-health {
++ led_white_health: white-health {
+ label = "viper:white:health";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+@@ -69,9 +73,18 @@
};
};
@@ -21,7 +41,7 @@
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
-@@ -163,22 +172,22 @@
+@@ -163,22 +176,22 @@
};
partition@200000 {
@@ -48,7 +68,7 @@
reg = <0x1EA0000 0x1760000>;
};
-@@ -209,53 +218,6 @@
+@@ -209,53 +222,6 @@
&mdio {
status = "okay";
@@ -102,7 +122,7 @@
};
&uart0 {
-@@ -274,10 +236,14 @@
+@@ -274,10 +240,14 @@
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
diff --git a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
index 8270613ea0..8f181ac472 100644
--- a/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
+++ b/target/linux/kirkwood/patches-4.14/105-goflexhome.patch
@@ -10,7 +10,7 @@
kirkwood-ib62x0.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
+@@ -0,0 +1,123 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
@@ -20,6 +20,13 @@
+ model = "Seagate GoFlex Home";
+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
@@ -62,12 +69,11 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
-+ health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
+ };
-+ fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
diff --git a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
index b22176880b..340a4809de 100644
--- a/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
+++ b/target/linux/kirkwood/patches-4.14/106-goflexnet.patch
@@ -1,6 +1,35 @@
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -159,18 +159,8 @@
+@@ -8,6 +8,13 @@
+ model = "Seagate GoFlex Net";
+ compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -85,12 +92,11 @@
+ >;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -159,18 +165,8 @@
};
partition@100000 {
diff --git a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
index eefd78abdb..2da8f4f0d1 100644
--- a/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
+++ b/target/linux/kirkwood/patches-4.14/107-02-nsa310b.patch
@@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
kirkwood-openblocks_a6.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,124 @@
+@@ -0,0 +1,131 @@
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
@@ -34,6 +34,13 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
+ model = "ZyXEL NSA310b";
+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_green_sys;
++ led-failsafe = &led_red_sys;
++ led-running = &led_green_sys;
++ led-upgrade = &led_red_sys;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
@@ -103,11 +110,11 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
+ gpio-leds {
+ compatible = "gpio-leds";
+
-+ green-sys {
++ led_green_sys: green-sys {
+ label = "nsa310:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
-+ red-sys {
++ led_red_sys: red-sys {
+ label = "nsa310:red:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/target/linux/kirkwood/patches-4.14/108-on100.patch b/target/linux/kirkwood/patches-4.14/108-on100.patch
index 7856277e40..42da3e7332 100644
--- a/target/linux/kirkwood/patches-4.14/108-on100.patch
+++ b/target/linux/kirkwood/patches-4.14/108-on100.patch
@@ -1,6 +1,6 @@
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,160 @@
+@@ -0,0 +1,164 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
@@ -16,6 +16,10 @@
+ };
+
+ aliases {
++ led-boot = &led_health_green;
++ led-failsafe = &led_health_red;
++ led-running = &led_health_green;
++ led-upgrade = &led_health_red;
+ serial0 = &uart0;
+ };
+
@@ -43,22 +47,22 @@
+ pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
+ pinctrl-names = "default";
+
-+ health-g {
++ led_health_green: health_green {
+ label = "on100:green:health";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
-+ health-r {
++ led_health_red: health_red {
+ label = "on100:red:health";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
-+ health2-g {
++ health2_green {
+ label = "on100:green:health2";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
-+ health2-r {
++ health2_red {
+ label = "on100:red:health2";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
diff --git a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
index b4e53cd659..f23cd93f33 100644
--- a/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.14/109-pogoplug_v4.patch
@@ -1,6 +1,19 @@
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -24,6 +24,7 @@
+@@ -18,12 +18,20 @@
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
};
chosen {
@@ -8,7 +21,7 @@
stdout-path = "uart0:115200n8";
};
-@@ -37,8 +38,8 @@
+@@ -37,8 +45,8 @@
eject {
debounce_interval = <50>;
wakeup-source;
@@ -19,7 +32,22 @@
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
-@@ -137,29 +138,19 @@
+@@ -48,12 +56,11 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+- default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+@@ -137,29 +144,19 @@
#size-cells = <1>;
partition@0 {
diff --git a/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
new file mode 100644
index 0000000000..8bba4b1a3c
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.14/110-pogo_e02.patch
@@ -0,0 +1,31 @@
+--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -22,6 +22,13 @@
+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -35,12 +42,11 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
+- health {
++ led_health: health {
+ label = "pogo_e02:green:health";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogo_e02:orange:fault";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };
diff --git a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
index d1a5aa7d3e..494540d730 100644
--- a/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
+++ b/target/linux/kirkwood/patches-4.19/100-ib62x0.patch
@@ -1,15 +1,37 @@
--- a/arch/arm/boot/dts/kirkwood-ib62x0.dts
+++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts
-@@ -6,7 +6,7 @@
+@@ -6,7 +6,14 @@
/ {
model = "RaidSonic ICY BOX IB-NAS62x0 (Rev B)";
- compatible = "raidsonic,ib-nas6210-b", "raidsonic,ib-nas6220-b", "raidsonic,ib-nas6210", "raidsonic,ib-nas6220", "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+ compatible = "raidsonic,ib-nas62x0", "marvell,kirkwood-88f6281", "marvell,kirkwood";
++
++ aliases {
++ led-boot = &led_green_os;
++ led-failsafe = &led_red_os;
++ led-running = &led_green_os;
++ led-upgrade = &led_red_os;
++ };
memory {
device_type = "memory";
-@@ -118,13 +118,13 @@
+@@ -81,12 +88,11 @@
+ &pmx_led_usb_transfer>;
+ pinctrl-names = "default";
+
+- green-os {
++ led_green_os: green-os {
+ label = "ib62x0:green:os";
+ gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+- red-os {
++ led_red_os: red-os {
+ label = "ib62x0:red:os";
+ gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>;
+ };
+@@ -118,13 +124,13 @@
};
partition@100000 {
diff --git a/target/linux/kirkwood/patches-4.19/101-iconnect.patch b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
index ab47b5a724..f36f50eae4 100644
--- a/target/linux/kirkwood/patches-4.19/101-iconnect.patch
+++ b/target/linux/kirkwood/patches-4.19/101-iconnect.patch
@@ -1,6 +1,20 @@
--- a/arch/arm/boot/dts/kirkwood-iconnect.dts
+++ b/arch/arm/boot/dts/kirkwood-iconnect.dts
-@@ -16,8 +16,6 @@
+@@ -8,6 +8,13 @@
+ model = "Iomega Iconnect";
+ compatible = "iom,iconnect-1.1", "iom,iconnect", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power_blue;
++ led-failsafe = &led_power_red;
++ led-running = &led_power_blue;
++ led-upgrade = &led_power_red;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -16,8 +23,6 @@
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
stdout-path = &uart0;
@@ -9,7 +23,22 @@
};
ocp@f1000000 {
-@@ -146,28 +144,23 @@
+@@ -89,12 +94,11 @@
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+- power-blue {
++ led_power_blue: power-blue {
+ label = "power:blue";
+ gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+- power-red {
++ led_power_red: power-red {
+ label = "power:red";
+ gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>;
+ };
+@@ -146,28 +150,23 @@
status = "okay";
partition@0 {
diff --git a/target/linux/kirkwood/patches-4.19/102-dockstar.patch b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
index 7462b93e0c..fb05e469bc 100644
--- a/target/linux/kirkwood/patches-4.19/102-dockstar.patch
+++ b/target/linux/kirkwood/patches-4.19/102-dockstar.patch
@@ -1,6 +1,35 @@
--- a/arch/arm/boot/dts/kirkwood-dockstar.dts
+++ b/arch/arm/boot/dts/kirkwood-dockstar.dts
-@@ -78,18 +78,22 @@
+@@ -8,6 +8,13 @@
+ model = "Seagate FreeAgent Dockstar";
+ compatible = "seagate,dockstar", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -42,12 +49,11 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_orange>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -78,18 +84,22 @@
partition@0 {
label = "u-boot";
diff --git a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
index 9036ead951..73655e1293 100644
--- a/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
+++ b/target/linux/kirkwood/patches-4.19/103-iomega-ix2-200.patch
@@ -1,6 +1,39 @@
--- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
+++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
-@@ -186,18 +186,18 @@
+@@ -8,6 +8,13 @@
+ model = "Iomega StorCenter ix2-200";
+ compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_health;
++ led-running = &led_power;
++ led-upgrade = &led_health;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -127,16 +134,15 @@
+ &pmx_led_rebuild &pmx_led_health >;
+ pinctrl-names = "default";
+
+- power_led {
++ led_power: power_led {
+ label = "status:white:power_led";
+ gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+- default-state = "keep";
+ };
+ rebuild_led {
+ label = "status:white:rebuild_led";
+ gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+ };
+- health_led {
++ led_health: health_led {
+ label = "status:red:health_led";
+ gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+ };
+@@ -186,18 +192,18 @@
};
partition@a0000 {
@@ -22,7 +55,7 @@
reg = <0x400000 0x1C00000>;
};
};
-@@ -211,7 +211,7 @@
+@@ -211,7 +217,7 @@
};
&eth0 {
diff --git a/target/linux/kirkwood/patches-4.19/104-ea3500.patch b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
index 45dc670ebc..466bf714c4 100644
--- a/target/linux/kirkwood/patches-4.19/104-ea3500.patch
+++ b/target/linux/kirkwood/patches-4.19/104-ea3500.patch
@@ -10,7 +10,7 @@
kirkwood-lsxhl.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-linksys-audi.dts
-@@ -0,0 +1,246 @@
+@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * kirkwood-linksys-audi.dts - Device Tree file for Linksys EA3500
@@ -37,6 +37,10 @@
+ };
+
+ aliases {
++ led-boot = &led_power;
++ led-failsafe = &led_power;
++ led-running = &led_power;
++ led-upgrade = &led_power;
+ serial0 = &uart0;
+ };
+
@@ -67,7 +71,7 @@
+ pinctrl-0 = < &pmx_led_green_power >;
+ pinctrl-names = "default";
+
-+ green-power {
++ led_power: power {
+ label = "audi:green:power";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/target/linux/kirkwood/patches-4.19/105-ea4500.patch b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
index c7c8b38f95..601c1cad6d 100644
--- a/target/linux/kirkwood/patches-4.19/105-ea4500.patch
+++ b/target/linux/kirkwood/patches-4.19/105-ea4500.patch
@@ -1,6 +1,26 @@
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
-@@ -67,9 +67,23 @@
+@@ -24,6 +24,10 @@
+ };
+
+ aliases {
++ led-boot = &led_white_health;
++ led-failsafe = &led_white_health;
++ led-running = &led_white_health;
++ led-upgrade = &led_white_health;
+ serial0 = &uart0;
+ };
+
+@@ -56,7 +60,7 @@
+ pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
+ pinctrl-names = "default";
+
+- white-health {
++ led_white_health: white-health {
+ label = "viper:white:health";
+ gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
+ };
+@@ -67,9 +71,23 @@
};
};
@@ -26,7 +46,7 @@
compatible = "marvell,dsa";
#address-cells = <2>;
#size-cells = <0>;
-@@ -161,22 +175,22 @@
+@@ -161,22 +179,22 @@
};
partition@200000 {
@@ -53,7 +73,7 @@
reg = <0x1EA0000 0x1760000>;
};
-@@ -207,53 +221,6 @@
+@@ -207,53 +225,6 @@
&mdio {
status = "okay";
@@ -107,7 +127,7 @@
};
&uart0 {
-@@ -272,10 +239,14 @@
+@@ -272,10 +243,14 @@
};
/* eth1 is connected to the switch at port 6. However DSA only supports a
diff --git a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
index 9ac30b6d30..db43a27219 100644
--- a/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
+++ b/target/linux/kirkwood/patches-4.19/105-goflexhome.patch
@@ -10,7 +10,7 @@
kirkwood-ib62x0.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-goflexhome.dts
-@@ -0,0 +1,117 @@
+@@ -0,0 +1,123 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
@@ -20,6 +20,13 @@
+ model = "Seagate GoFlex Home";
+ compatible = "seagate,goflexhome", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
@@ -62,12 +69,11 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
-+ health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
-+ linux,default-trigger = "default-on";
+ };
-+ fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
diff --git a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
index b22176880b..340a4809de 100644
--- a/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
+++ b/target/linux/kirkwood/patches-4.19/106-goflexnet.patch
@@ -1,6 +1,35 @@
--- a/arch/arm/boot/dts/kirkwood-goflexnet.dts
+++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts
-@@ -159,18 +159,8 @@
+@@ -8,6 +8,13 @@
+ model = "Seagate GoFlex Net";
+ compatible = "seagate,goflexnet", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x8000000>;
+@@ -85,12 +92,11 @@
+ >;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "status:green:health";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "status:orange:fault";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
+@@ -159,18 +165,8 @@
};
partition@100000 {
diff --git a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
index f8b963e03f..5e2b1d8d9c 100644
--- a/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
+++ b/target/linux/kirkwood/patches-4.19/107-02-nsa310b.patch
@@ -20,7 +20,7 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
kirkwood-openblocks_a6.dtb \
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-nsa310b.dts
-@@ -0,0 +1,124 @@
+@@ -0,0 +1,131 @@
+/dts-v1/;
+
+#include "kirkwood-nsa3x0-common.dtsi"
@@ -34,6 +34,13 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
+ model = "ZyXEL NSA310b";
+ compatible = "zyxel,nsa310b", "zyxel,nsa310", "marvell,kirkwood-88f6281", "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_green_sys;
++ led-failsafe = &led_red_sys;
++ led-running = &led_green_sys;
++ led-upgrade = &led_red_sys;
++ };
++
+ memory@0 {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
@@ -103,11 +110,11 @@ NOTE: this patch can be upstreamed as-is, LEDE-specific
+ gpio-leds {
+ compatible = "gpio-leds";
+
-+ green-sys {
++ led_green_sys: green-sys {
+ label = "nsa310:green:sys";
+ gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>;
+ };
-+ red-sys {
++ led_red_sys: red-sys {
+ label = "nsa310:red:sys";
+ gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/target/linux/kirkwood/patches-4.19/108-on100.patch b/target/linux/kirkwood/patches-4.19/108-on100.patch
index 2f535955dd..fa92509e2e 100644
--- a/target/linux/kirkwood/patches-4.19/108-on100.patch
+++ b/target/linux/kirkwood/patches-4.19/108-on100.patch
@@ -1,6 +1,6 @@
--- /dev/null
+++ b/arch/arm/boot/dts/kirkwood-on100.dts
-@@ -0,0 +1,158 @@
+@@ -0,0 +1,162 @@
+/dts-v1/;
+
+#include "kirkwood.dtsi"
@@ -16,6 +16,10 @@
+ };
+
+ aliases {
++ led-boot = &led_health_green;
++ led-failsafe = &led_health_red;
++ led-running = &led_health_green;
++ led-upgrade = &led_health_red;
+ serial0 = &uart0;
+ };
+
@@ -41,22 +45,22 @@
+ pinctrl-0 = < &pmx_led_health_r &pmx_led_health_g >;
+ pinctrl-names = "default";
+
-+ health-g {
++ led_health_green: health_green {
+ label = "on100:green:health";
+ gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+ };
+
-+ health-r {
++ led_health_red: health_red {
+ label = "on100:red:health";
+ gpios = <&gpio1 13 GPIO_ACTIVE_LOW>;
+ };
+
-+ health2-g {
++ health2_green {
+ label = "on100:green:health2";
+ gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
+ };
+
-+ health2-r {
++ health2_red {
+ label = "on100:red:health2";
+ gpios = <&gpio1 15 GPIO_ACTIVE_LOW>;
+ };
diff --git a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
index b54768290e..6967a0c815 100644
--- a/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
+++ b/target/linux/kirkwood/patches-4.19/109-pogoplug_v4.patch
@@ -1,6 +1,19 @@
--- a/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
+++ b/arch/arm/boot/dts/kirkwood-pogoplug-series-4.dts
-@@ -24,6 +24,7 @@
+@@ -18,12 +18,20 @@
+ compatible = "cloudengines,pogoplugv4", "marvell,kirkwood-88f6192",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x08000000>;
};
chosen {
@@ -8,7 +21,7 @@
stdout-path = "uart0:115200n8";
};
-@@ -37,8 +38,8 @@
+@@ -37,8 +45,8 @@
eject {
debounce-interval = <50>;
wakeup-source;
@@ -19,7 +32,22 @@
gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
};
};
-@@ -137,29 +138,19 @@
+@@ -48,12 +56,11 @@
+ pinctrl-0 = <&pmx_led_green &pmx_led_red>;
+ pinctrl-names = "default";
+
+- health {
++ led_health: health {
+ label = "pogoplugv4:green:health";
+ gpios = <&gpio0 22 GPIO_ACTIVE_LOW>;
+- default-state = "on";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogoplugv4:red:fault";
+ gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
+ };
+@@ -137,29 +144,19 @@
#size-cells = <1>;
partition@0 {
diff --git a/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
new file mode 100644
index 0000000000..82a13cca47
--- /dev/null
+++ b/target/linux/kirkwood/patches-4.19/110-pogo_e02.patch
@@ -0,0 +1,31 @@
+--- a/arch/arm/boot/dts/kirkwood-pogo_e02.dts
++++ b/arch/arm/boot/dts/kirkwood-pogo_e02.dts
+@@ -20,6 +20,13 @@
+ compatible = "cloudengines,pogoe02", "marvell,kirkwood-88f6281",
+ "marvell,kirkwood";
+
++ aliases {
++ led-boot = &led_health;
++ led-failsafe = &led_fault;
++ led-running = &led_health;
++ led-upgrade = &led_fault;
++ };
++
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x10000000>;
+@@ -33,12 +40,11 @@
+ gpio-leds {
+ compatible = "gpio-leds";
+
+- health {
++ led_health: health {
+ label = "pogo_e02:green:health";
+ gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+- default-state = "keep";
+ };
+- fault {
++ led_fault: fault {
+ label = "pogo_e02:orange:fault";
+ gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
+ };