aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorSerg Studzinskii <serguzhg@gmail.com>2017-03-08 22:10:05 +0200
committerPiotr Dymacz <pepe2k@gmail.com>2017-06-11 21:32:17 +0200
commitb7cc6616152a12b3f68c5f36e9ef052da5de889e (patch)
treea32a392b58844a8d0b38b4f24d2bb7595f324e75
parent641af0c39d071c8fb33d90ac3b4d369d34c61dfb (diff)
downloadupstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.gz
upstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.tar.bz2
upstream-b7cc6616152a12b3f68c5f36e9ef052da5de889e.zip
ar71xx: add support for TP-Link TL-WR942N v1
TP-Link TL-WR942N v1 is a 2.4 GHz single-band N450 router, based on Qualcomm/Atheros QCA9561. Specification: - 775/650/258 MHz (CPU/DDR/AHB) - 128 MB of RAM (DDR2) - 16 MB of FLASH (SPI NOR) - 3T3R 2.4 GHz - 5x 10/100 Mbps Ethernet - 2x USB 2.0 - 11x LED (most are controlled by 74HC595) - 2x button - UART header on PCB* * Serial console is disabled in OEM non-beta firmwares and corresponding GPIO pins 14 and 15 are assigned to control USB1 and USB2 LEDs by production (non-beta) U-Boot and firmware. Currently not working: 1. USB1 and USB2 LEDs if UART RX and TX pins are assigned to their GPIOs by some U-Boot versions. Flash instruction under vendor GUI: 1. Download "lede-ar71xx-generic-tl-wr942n-v1-squashfs-factory.bin". 2. Go to WEB interface and perform usual firmware upgrade. FLash instruction under U-Boot recovery mode (doesn't work in beta firmware): 1. Setup PC with static IP "192.168.0.66/24" and tftp server. 2. Change "*-factory" image filename to "WR942v1_recovery.bin" and make it available to download from your tftp server. 3. Press "reset" button and power up the router, wait till "WPS" LED turns on. Flash instruction under U-Boot, using UART (can be done only with preinstalled UART-enabled U-Boot version!): 1. Use "tpl" to stop autobooting and obtain U-Boot CLI access. 2. Setup ip addresses for U-Boot and your tftp server. 3. Issue below commands: tftp 0x81000000 lede-ar71xx-generic-tl-wr942n-v1-sysupgrade.bin erase 0x9f020000 +$filesize cp.b 0x81000000 0x9f020000 $filesize reset Signed-off-by: Serg Studzinskii <serguzhg@gmail.com> [minor code style fixes, extended commit message] Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/01_leds10
-rwxr-xr-xtarget/linux/ar71xx/base-files/etc/board.d/02_network3
-rw-r--r--target/linux/ar71xx/base-files/etc/diag.sh1
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/ar71xx.sh3
-rwxr-xr-xtarget/linux/ar71xx/base-files/lib/upgrade/platform.sh1
-rw-r--r--target/linux/ar71xx/config-4.41
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt11
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/Makefile1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c279
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/machtypes.h1
-rw-r--r--target/linux/ar71xx/files/arch/mips/ath79/nvram.c7
-rw-r--r--target/linux/ar71xx/image/tp-link.mk15
-rw-r--r--target/linux/ar71xx/mikrotik/config-default1
-rw-r--r--target/linux/ar71xx/nand/config-default1
-rw-r--r--tools/firmware-utils/src/tplink-safeloader.c37
15 files changed, 370 insertions, 2 deletions
diff --git a/target/linux/ar71xx/base-files/etc/board.d/01_leds b/target/linux/ar71xx/base-files/etc/board.d/01_leds
index 2f9ae8b10e..be6dfcc968 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/01_leds
+++ b/target/linux/ar71xx/base-files/etc/board.d/01_leds
@@ -745,6 +745,16 @@ tl-wr840n-v3)
ucidef_set_led_switch "lan" "LAN" "tp-link:green:lan" "switch0" "0x1E"
ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
;;
+tl-wr942n-v1)
+ ucidef_set_led_switch "lan1" "LAN1" "$board:green:lan1" "switch0" "0x04"
+ ucidef_set_led_switch "lan2" "LAN2" "$board:green:lan2" "switch0" "0x08"
+ ucidef_set_led_switch "lan3" "LAN3" "$board:green:lan3" "switch0" "0x10"
+ ucidef_set_led_switch "lan4" "LAN4" "$board:green:lan4" "switch0" "0x02"
+ ucidef_set_led_netdev "wan" "WAN" "$board:green:wan" "eth0"
+ ucidef_set_led_wlan "wlan" "WLAN" "$board:green:wlan" "phy0tpt"
+ ucidef_set_led_usbdev "usb1" "USB1" "$board:green:usb1" "1-1.2"
+ ucidef_set_led_usbdev "usb2" "USB2" "$board:green:usb2" "1-1.1"
+ ;;
tl-wr1043nd|\
tl-wr1043nd-v2)
ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
diff --git a/target/linux/ar71xx/base-files/etc/board.d/02_network b/target/linux/ar71xx/base-files/etc/board.d/02_network
index 0dc8bf31a8..b805487977 100755
--- a/target/linux/ar71xx/base-files/etc/board.d/02_network
+++ b/target/linux/ar71xx/base-files/etc/board.d/02_network
@@ -411,7 +411,8 @@ ar71xx_setup_interfaces()
tl-mr3420-v2|\
tl-wr841n-v8|\
tl-wr842n-v2|\
- tl-wr941nd-v5)
+ tl-wr941nd-v5|\
+ tl-wr942n-v1)
ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
ucidef_add_switch "switch0" \
"0@eth1" "1:lan:4" "2:lan:1" "3:lan:2" "4:lan:3"
diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh
index ae43351c6a..369abde9d4 100644
--- a/target/linux/ar71xx/base-files/etc/diag.sh
+++ b/target/linux/ar71xx/base-files/etc/diag.sh
@@ -36,6 +36,7 @@ get_status_led() {
db120|\
dr344|\
tew-632brp|\
+ tl-wr942n-v1|\
wpj344|\
zbt-we1526)
status_led="$board:green:status"
diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh
index e781c6ee7e..5660d3eaa9 100755
--- a/target/linux/ar71xx/base-files/lib/ar71xx.sh
+++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh
@@ -1166,6 +1166,9 @@ ar71xx_board_detect() {
*"TL-WR941ND")
name="tl-wr941nd"
;;
+ *"TL-WR942N v1")
+ name="tl-wr942n-v1"
+ ;;
*"Tube2H")
name="tube2h"
;;
diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
index 16701f64ca..e14f8f3e49 100755
--- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
+++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh
@@ -271,6 +271,7 @@ platform_check_image() {
tew-712br|\
tew-732br|\
tew-823dru|\
+ tl-wr942n-v1|\
unifi-outdoor|\
unifiac-lite|\
unifiac-pro|\
diff --git a/target/linux/ar71xx/config-4.4 b/target/linux/ar71xx/config-4.4
index 43a487d20e..df1108d904 100644
--- a/target/linux/ar71xx/config-4.4
+++ b/target/linux/ar71xx/config-4.4
@@ -209,6 +209,7 @@ CONFIG_ATH79_MACH_TL_WR841N_V9=y
CONFIG_ATH79_MACH_TL_WR941ND=y
CONFIG_ATH79_MACH_TL_WR941ND_V6=y
CONFIG_ATH79_MACH_TL_WR940N_V4=y
+CONFIG_ATH79_MACH_TL_WR942N_V1=y
CONFIG_ATH79_MACH_TUBE2H=y
CONFIG_ATH79_MACH_UBNT=y
CONFIG_ATH79_MACH_UBNT_UNIFIAC=y
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
index c18eec557d..ae64c6e92e 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
@@ -1695,6 +1695,17 @@ config ATH79_MACH_TL_WR940N_V4
select ATH79_DEV_M25P80
select ATH79_DEV_WMAC
+config ATH79_MACH_TL_WR942N_V1
+ bool "TP-LINK TL-WR942N v1 support"
+ select SOC_QCA956X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_USB
+ select ATH79_DEV_WMAC
+ select ATH79_NVRAM
+
config ATH79_MACH_TL_WR1041N_V2
bool "TP-LINK TL-WR1041N v2 support"
select SOC_AR934X
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/Makefile b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
index 55c5a2a939..bf5515b4f3 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/Makefile
+++ b/target/linux/ar71xx/files/arch/mips/ath79/Makefile
@@ -214,6 +214,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR841N_V9) += mach-tl-wr841n-v9.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND) += mach-tl-wr941nd.o
obj-$(CONFIG_ATH79_MACH_TL_WR941ND_V6) += mach-tl-wr941nd-v6.o
obj-$(CONFIG_ATH79_MACH_TL_WR940N_V4) += mach-tl-wr940n-v4.o
+obj-$(CONFIG_ATH79_MACH_TL_WR942N_V1) += mach-tl-wr942n-v1.o
obj-$(CONFIG_ATH79_MACH_TUBE2H) += mach-tube2h.o
obj-$(CONFIG_ATH79_MACH_UBNT) += mach-ubnt.o
obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC) += mach-ubnt-unifiac.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c
new file mode 100644
index 0000000000..72910400c5
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-tl-wr942n-v1.c
@@ -0,0 +1,279 @@
+/*
+ * TP-Link TL-WR942N(RU) v1 board support
+ *
+ * Copyright (C) 2017 Sergey Studzinski <serguzhg@gmail.com>
+ * Thanks to Henryk Heisig <hyniu@o2.pl>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License version 2 as published
+ * by the Free Software Foundation.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+#include <linux/gpio.h>
+#include <linux/init.h>
+#include <linux/spi/spi_gpio.h>
+#include <linux/spi/74x164.h>
+
+#include "common.h"
+#include "dev-m25p80.h"
+#include "machtypes.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-spi.h"
+#include "dev-usb.h"
+#include "dev-wmac.h"
+#include "nvram.h"
+
+#define TL_WR942N_V1_KEYS_POLL_INTERVAL 20
+#define TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL \
+ (3 * TL_WR942N_V1_KEYS_POLL_INTERVAL)
+
+#define TL_WR942N_V1_GPIO_BTN_RESET 1
+#define TL_WR942N_V1_GPIO_BTN_RFKILL 2
+
+#define TL_WR942N_V1_GPIO_UART_TX 4
+#define TL_WR942N_V1_GPIO_UART_RX 5
+
+#define TL_WR942N_V1_GPIO_LED_USB2 14
+#define TL_WR942N_V1_GPIO_LED_USB1 15
+
+#define TL_WR942N_V1_GPIO_SHIFT_OE 16
+#define TL_WR942N_V1_GPIO_SHIFT_SER 17
+#define TL_WR942N_V1_GPIO_SHIFT_SRCLK 18
+#define TL_WR942N_V1_GPIO_SHIFT_SRCLR 19
+#define TL_WR942N_V1_GPIO_SHIFT_RCLK 20
+#define TL_WR942N_V1_GPIO_LED_WPS 21
+#define TL_WR942N_V1_GPIO_LED_STATUS 22
+
+#define TL_WR942N_V1_74HC_GPIO_BASE QCA956X_GPIO_COUNT
+#define TL_WR942N_V1_74HC_GPIO_LED_LAN4 23
+#define TL_WR942N_V1_74HC_GPIO_LED_LAN3 24
+#define TL_WR942N_V1_74HC_GPIO_LED_LAN2 25
+#define TL_WR942N_V1_74HC_GPIO_LED_LAN1 26
+#define TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN 27
+#define TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER 28
+#define TL_WR942N_V1_74HC_GPIO_LED_WLAN 29
+#define TL_WR942N_V1_74HC_GPIO_HUB_RESET 30 /* from u-boot sources */
+
+#define TL_WR942N_V1_SSR_BIT_0 0
+#define TL_WR942N_V1_SSR_BIT_1 1
+#define TL_WR942N_V1_SSR_BIT_2 2
+#define TL_WR942N_V1_SSR_BIT_3 3
+#define TL_WR942N_V1_SSR_BIT_4 4
+#define TL_WR942N_V1_SSR_BIT_5 5
+#define TL_WR942N_V1_SSR_BIT_6 6
+#define TL_WR942N_V1_SSR_BIT_7 7
+
+#define TL_WR942N_V1_WMAC_CALDATA_OFFSET 0x1000
+#define TL_WR942N_V1_DEFAULT_MAC_ADDR 0x1fe40008
+#define TL_WR942N_V1_DEFAULT_MAC_SIZE 0x200
+
+#define GPIO_IN_ENABLE0_UART_SIN_LSB 8
+#define GPIO_IN_ENABLE0_UART_SIN_MASK 0x0000ff00
+
+static struct gpio_led tl_wr942n_v1_leds_gpio[] __initdata = {
+ {
+ .name = "tl-wr942n-v1:green:status",
+ .gpio = TL_WR942N_V1_GPIO_LED_STATUS,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:wlan",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_WLAN,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:lan1",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN1,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:lan2",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN2,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:lan3",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN3,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:lan4",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_LAN4,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:wan",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_GREEN,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:amber:wan",
+ .gpio = TL_WR942N_V1_74HC_GPIO_LED_WAN_AMBER,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:wps",
+ .gpio = TL_WR942N_V1_GPIO_LED_WPS,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:usb1",
+ .gpio = TL_WR942N_V1_GPIO_LED_USB1,
+ .active_low = 1,
+ }, {
+ .name = "tl-wr942n-v1:green:usb2",
+ .gpio = TL_WR942N_V1_GPIO_LED_USB2,
+ .active_low = 1,
+ },
+};
+
+static struct gpio_keys_button tl_wr942n_v1_gpio_keys[] __initdata = {
+ {
+ .desc = "Reset button",
+ .type = EV_KEY,
+ .code = KEY_RESTART,
+ .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR942N_V1_GPIO_BTN_RESET,
+ .active_low = 1,
+ }, {
+ .desc = "RFKILL button",
+ .type = EV_KEY,
+ .code = KEY_RFKILL,
+ .debounce_interval = TL_WR942N_V1_KEYS_DEBOUNCE_INTERVAL,
+ .gpio = TL_WR942N_V1_GPIO_BTN_RFKILL,
+ .active_low = 1,
+ },
+};
+
+static struct spi_gpio_platform_data tl_wr942n_v1_spi_data = {
+ .sck = TL_WR942N_V1_GPIO_SHIFT_SRCLK,
+ .miso = SPI_GPIO_NO_MISO,
+ .mosi = TL_WR942N_V1_GPIO_SHIFT_SER,
+ .num_chipselect = 1,
+};
+
+static u8 tl_wr942n_v1_ssr_initdata[] __initdata = {
+ BIT(TL_WR942N_V1_SSR_BIT_7) |
+ BIT(TL_WR942N_V1_SSR_BIT_6) |
+ BIT(TL_WR942N_V1_SSR_BIT_5) |
+ BIT(TL_WR942N_V1_SSR_BIT_4) |
+ BIT(TL_WR942N_V1_SSR_BIT_3) |
+ BIT(TL_WR942N_V1_SSR_BIT_2) |
+ BIT(TL_WR942N_V1_SSR_BIT_1) |
+ BIT(TL_WR942N_V1_SSR_BIT_0)
+};
+
+static struct gen_74x164_chip_platform_data tl_wr942n_v1_ssr_data = {
+ .base = TL_WR942N_V1_74HC_GPIO_BASE,
+ .num_registers = ARRAY_SIZE(tl_wr942n_v1_ssr_initdata),
+ .init_data = tl_wr942n_v1_ssr_initdata,
+};
+
+static struct platform_device tl_wr942n_v1_spi_device = {
+ .name = "spi_gpio",
+ .id = 1,
+ .dev = {
+ .platform_data = &tl_wr942n_v1_spi_data,
+ },
+};
+
+static struct spi_board_info tl_wr942n_v1_spi_info[] = {
+ {
+ .bus_num = 1,
+ .chip_select = 0,
+ .max_speed_hz = 10000000,
+ .modalias = "74x164",
+ .platform_data = &tl_wr942n_v1_ssr_data,
+ .controller_data = (void *) TL_WR942N_V1_GPIO_SHIFT_RCLK,
+ },
+};
+
+static void tl_wr942n_v1_get_mac(const char *name, char *mac)
+{
+ u8 *nvram = (u8 *) KSEG1ADDR(TL_WR942N_V1_DEFAULT_MAC_ADDR);
+ int err;
+
+ err = ath79_nvram_parse_mac_addr(nvram, TL_WR942N_V1_DEFAULT_MAC_SIZE,
+ name, mac);
+
+ if (err)
+ pr_err("no MAC address found for %s\n", name);
+}
+
+static void __init tl_wr942n_v1_setup(void)
+{
+ u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
+ u8 tmpmac[ETH_ALEN];
+ void __iomem *base;
+ u32 t;
+
+ ath79_register_m25p80(NULL);
+
+ spi_register_board_info(tl_wr942n_v1_spi_info,
+ ARRAY_SIZE(tl_wr942n_v1_spi_info));
+ platform_device_register(&tl_wr942n_v1_spi_device);
+
+ /* Check inherited UART RX GPIO definition */
+ base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
+
+ t = __raw_readl(base + QCA956X_GPIO_REG_IN_ENABLE0);
+ if (((t & GPIO_IN_ENABLE0_UART_SIN_MASK)
+ >> GPIO_IN_ENABLE0_UART_SIN_LSB) == TL_WR942N_V1_GPIO_LED_USB1) {
+ pr_warn("Active UART detected on USBLED's GPIOs!\n");
+
+ tl_wr942n_v1_leds_gpio[9].gpio = TL_WR942N_V1_GPIO_UART_TX;
+ tl_wr942n_v1_leds_gpio[10].gpio = TL_WR942N_V1_GPIO_UART_RX;
+ }
+
+ ath79_register_leds_gpio(-1, ARRAY_SIZE(tl_wr942n_v1_leds_gpio),
+ tl_wr942n_v1_leds_gpio);
+
+ ath79_register_gpio_keys_polled(-1, TL_WR942N_V1_KEYS_POLL_INTERVAL,
+ ARRAY_SIZE(tl_wr942n_v1_gpio_keys),
+ tl_wr942n_v1_gpio_keys);
+
+ tl_wr942n_v1_get_mac("MAC:", tmpmac);
+
+ /* swap PHYs */
+ ath79_setup_qca956x_eth_cfg(QCA956X_ETH_CFG_SW_PHY_SWAP |
+ QCA956X_ETH_CFG_SW_PHY_ADDR_SWAP);
+
+ ath79_register_mdio(0, 0x0);
+ ath79_register_mdio(1, 0x0);
+
+ /* WAN port */
+ ath79_init_mac(ath79_eth0_data.mac_addr, tmpmac, 1);
+ ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
+ ath79_eth0_data.speed = SPEED_100;
+ ath79_eth0_data.duplex = DUPLEX_FULL;
+
+ /* swaped PHYs */
+ ath79_eth0_data.phy_mask = BIT(0);
+ ath79_register_eth(0);
+
+ /* LAN ports */
+ ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
+ ath79_init_mac(ath79_eth1_data.mac_addr, tmpmac, 0);
+ ath79_eth1_data.speed = SPEED_1000;
+ ath79_eth1_data.duplex = DUPLEX_FULL;
+
+ /* swaped PHYs */
+ ath79_switch_data.phy_poll_mask |= BIT(0);
+ ath79_switch_data.phy4_mii_en = 1;
+ ath79_register_eth(1);
+
+ ath79_register_wmac(art + TL_WR942N_V1_WMAC_CALDATA_OFFSET, tmpmac);
+
+ ath79_register_usb();
+
+ gpio_request_one(TL_WR942N_V1_74HC_GPIO_HUB_RESET,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "USB power");
+
+ gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_OE,
+ GPIOF_OUT_INIT_LOW | GPIOF_EXPORT_DIR_FIXED,
+ "LED control");
+
+ gpio_request_one(TL_WR942N_V1_GPIO_SHIFT_SRCLR,
+ GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
+ "LED reset");
+}
+
+MIPS_MACHINE(ATH79_MACH_TL_WR942N_V1, "TL-WR942N-V1", "TP-LINK TL-WR942N v1",
+ tl_wr942n_v1_setup);
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
index 0d05086a1c..46d250d47d 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
+++ b/target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
@@ -262,6 +262,7 @@ enum ath79_mach_type {
ATH79_MACH_TL_WR941ND_V5, /* TP-LINK TL-WR941ND v5 */
ATH79_MACH_TL_WR941ND_V6, /* TP-LINK TL-WR941ND v6 */
ATH79_MACH_TL_WR940N_V4, /* TP-LINK TL-WR940N v4 */
+ ATH79_MACH_TL_WR942N_V1, /* TP-LINK TL-WR942N v1 */
ATH79_MACH_TUBE2H, /* Alfa Network Tube2H */
ATH79_MACH_UBNT_AIRGW, /* Ubiquiti AirGateway */
ATH79_MACH_UBNT_AIRGWP, /* Ubiquiti AirGateway Pro */
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
index e55af5abe2..a1de55fb19 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/nvram.c
@@ -13,6 +13,7 @@
#include <linux/errno.h>
#include <linux/init.h>
#include <linux/string.h>
+#include <linux/etherdevice.h>
#include "nvram.h"
@@ -67,7 +68,11 @@ int ath79_nvram_parse_mac_addr(const char *nvram, unsigned nvram_len,
t = sscanf(mac_str, "%02hhx:%02hhx:%02hhx:%02hhx:%02hhx:%02hhx",
&mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
- if (t != 6) {
+ if (t != ETH_ALEN)
+ t = sscanf(mac_str, "%02hhx-%02hhx-%02hhx-%02hhx-%02hhx-%02hhx",
+ &mac[0], &mac[1], &mac[2], &mac[3], &mac[4], &mac[5]);
+
+ if (t != ETH_ALEN) {
ret = -EINVAL;
goto free;
}
diff --git a/target/linux/ar71xx/image/tp-link.mk b/target/linux/ar71xx/image/tp-link.mk
index 5ac641bf36..d9c7982e8c 100644
--- a/target/linux/ar71xx/image/tp-link.mk
+++ b/target/linux/ar71xx/image/tp-link.mk
@@ -873,6 +873,21 @@ define Device/tl-wr941nd-v6-cn
endef
TARGET_DEVICES += tl-wr941nd-v2 tl-wr941nd-v3 tl-wr941nd-v4 tl-wr941nd-v5 tl-wr941nd-v6 tl-wr941nd-v6-cn tl-wr940n-v4
+define Device/tl-wr942n-v1
+ DEVICE_TITLE := TP-LINK TL-WR942N v1
+ DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
+ BOARDNAME := TL-WR942N-V1
+ TPLINK_BOARD_NAME := TLWR942NV1
+ DEVICE_PROFILE := TLWR942
+ IMAGE_SIZE := 14464k
+ KERNEL := kernel-bin | patch-cmdline | lzma | uImageArcher lzma
+ IMAGES := sysupgrade.bin factory.bin
+ IMAGE/sysupgrade.bin := append-rootfs | tplink-safeloader sysupgrade
+ IMAGE/factory.bin := append-rootfs | tplink-safeloader factory
+ MTDPARTS := spi0.0:128k(u-boot)ro,1344k(kernel),13120k(rootfs),64k(product-info)ro,64k(partition-table)ro,256k(oem-config)ro,1344k(oem-vars)ro,64k(ART)ro,14464k@0x20000(firmware)
+endef
+TARGET_DEVICES += tl-wr942n-v1
+
define Device/tl-wr1041n-v2
$(Device/tplink-4mlzma)
DEVICE_TITLE := TP-LINK TL-WR1041N v2
diff --git a/target/linux/ar71xx/mikrotik/config-default b/target/linux/ar71xx/mikrotik/config-default
index 5c665801fe..748252ce48 100644
--- a/target/linux/ar71xx/mikrotik/config-default
+++ b/target/linux/ar71xx/mikrotik/config-default
@@ -172,6 +172,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
+# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
# CONFIG_ATH79_MACH_TUBE2H is not set
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
diff --git a/target/linux/ar71xx/nand/config-default b/target/linux/ar71xx/nand/config-default
index cc2b25c1af..7ae42fe8b9 100644
--- a/target/linux/ar71xx/nand/config-default
+++ b/target/linux/ar71xx/nand/config-default
@@ -160,6 +160,7 @@ CONFIG_ATH79_MACH_RAMBUTAN=y
# CONFIG_ATH79_MACH_TL_WR940N_V4 is not set
# CONFIG_ATH79_MACH_TL_WR941ND is not set
# CONFIG_ATH79_MACH_TL_WR941ND_V6 is not set
+# CONFIG_ATH79_MACH_TL_WR942N_V1 is not set
# CONFIG_ATH79_MACH_TUBE2H is not set
# CONFIG_ATH79_MACH_UBNT is not set
# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
diff --git a/tools/firmware-utils/src/tplink-safeloader.c b/tools/firmware-utils/src/tplink-safeloader.c
index 9c9efc369c..31b374f523 100644
--- a/tools/firmware-utils/src/tplink-safeloader.c
+++ b/tools/firmware-utils/src/tplink-safeloader.c
@@ -553,6 +553,43 @@ static struct device_info boards[] = {
.last_sysupgrade_partition = "file-system"
},
+ /** Firmware layout for the TL-WR942N V1 */
+ {
+ .id = "TLWR942NV1",
+ .vendor = "",
+ .support_list =
+ "SupportList:\r\n"
+ "{product_name:TL-WR942N,product_ver:1.0.0,special_id:00000000}\r\n"
+ "{product_name:TL-WR942N,product_ver:1.0.0,special_id:52550000}\r\n",
+ .support_trail = '\x00',
+ .soft_ver = NULL,
+
+ .partitions = {
+ {"fs-uboot", 0x00000, 0x20000},
+ {"os-image", 0x20000, 0x150000},
+ {"file-system", 0x170000, 0xcd0000},
+ {"default-mac", 0xe40000, 0x00200},
+ {"pin", 0xe40200, 0x00200},
+ {"product-info", 0xe40400, 0x0fc00},
+ {"partition-table", 0xe50000, 0x10000},
+ {"soft-version", 0xe60000, 0x10000},
+ {"support-list", 0xe70000, 0x10000},
+ {"profile", 0xe80000, 0x10000},
+ {"default-config", 0xe90000, 0x10000},
+ {"user-config", 0xea0000, 0x40000},
+ {"qos-db", 0xee0000, 0x40000},
+ {"certificate", 0xf20000, 0x10000},
+ {"usb-config", 0xfb0000, 0x10000},
+ {"log", 0xfc0000, 0x20000},
+ {"radio-bk", 0xfe0000, 0x10000},
+ {"radio", 0xff0000, 0x10000},
+ {NULL, 0, 0}
+ },
+
+ .first_sysupgrade_partition = "os-image",
+ .last_sysupgrade_partition = "file-system",
+ },
+
/** Firmware layout for the RE450 */
{
.id = "RE450",