aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorAndrey Bondar <a.bondar@8devices.com>2020-07-08 13:51:34 +0300
committerPetr Štetiar <ynezz@true.cz>2020-07-08 16:07:05 +0200
commitba59021d64d52a5ec3e75b9701d65f940c33a670 (patch)
treec1742044f29de15911092706f5490acb2d52fd97
parent667fbb8151c7348283985f28c43aeb848f948350 (diff)
downloadupstream-ba59021d64d52a5ec3e75b9701d65f940c33a670.tar.gz
upstream-ba59021d64d52a5ec3e75b9701d65f940c33a670.tar.bz2
upstream-ba59021d64d52a5ec3e75b9701d65f940c33a670.zip
ath79: add support for 8devices Lima board
Specification: • 650/600/216 MHz (CPU/DDR/AHB) • 64 MB of RAM (DDR2) • 32 MB of FLASH • 2T2R 2.4 GHz • 2x 10/100 Mbps Ethernet • 1x USB 2.0 Host socket • 1x miniPCIe slot • UART for serial console • 14x GPIO Flash instructions: Upgrading from ar71xx target: • Upload image into the board: scp openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin root@192.168.1.1/tmp/ • Run sysupgrade sysupgrade -F /tmp/openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin Upgrading from u-boot: • Set up tftp server with openwrt-ath79-generic-8dev_lima-initramfs-kernel.bin • Go to u-boot (reboot and press ESC when prompted) • Set TFTP server IP setenv serverip 192.168.1.254 • Set device ip from the same subnet setenv ipaddr 192.168.1.1 • Copy new firmware to board tftpboot 0x82000000 initramfs.bin • Boot OpenWRT bootm 0x82000000 • Upload image openwrt-ath79-generic-8dev_lima-squashfs-sysupgrade.bin into the board • Run sysupgrade. Signed-off-by: Andrey Bondar <a.bondar@8devices.com>
-rw-r--r--target/linux/ath79/dts/qca9531_8dev_lima.dts116
-rw-r--r--target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom7
-rw-r--r--target/linux/ath79/image/generic.mk10
3 files changed, 130 insertions, 3 deletions
diff --git a/target/linux/ath79/dts/qca9531_8dev_lima.dts b/target/linux/ath79/dts/qca9531_8dev_lima.dts
new file mode 100644
index 0000000000..118704ab40
--- /dev/null
+++ b/target/linux/ath79/dts/qca9531_8dev_lima.dts
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "qca953x.dtsi"
+
+/ {
+ compatible = "8dev,lima", "qca,qca9531";
+ model = "8devices Lima";
+
+ keys {
+ compatible = "gpio-keys";
+
+ reset {
+ label = "reset";
+ linux-code = "KEY_RESTART";
+ gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&pcie0 {
+ status = "okay";
+};
+
+&uart {
+ status = "okay";
+};
+
+&usb0 {
+ status = "okay";
+
+ dr_mode = "host";
+};
+
+&usb_phy {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
+
+&spi {
+ status = "okay";
+
+ num-cs = <1>;
+
+ /* Winbond W25Q256 SPI flash */
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <45000000>;
+
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "u-boot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "u-boot-env";
+ reg = <0x040000 0x040000>;
+ };
+
+ art: partition@80000 {
+ label = "art";
+ reg = <0x080000 0x040000>;
+ read-only;
+ };
+
+ partition@c0000 {
+ compatible = "denx,uimage";
+ label = "firmware";
+ reg = <0x0c0000 0xf40000>;
+ };
+ };
+ };
+};
+
+&mdio0 {
+ status = "okay";
+};
+
+&eth0 {
+ status = "okay";
+
+ phy-handle = <&swphy0>;
+ mtd-mac-address = <&art 0x6>;
+
+ gmac-config {
+ device = <&gmac>;
+
+ switch-phy-addr-swap = <1>;
+ switch-phy-swap = <1>;
+ };
+};
+
+&eth1 {
+ status = "okay";
+
+ mtd-mac-address = <&art 0x0>;
+};
+
+&wmac {
+ status = "okay";
+
+ mtd-cal-data = <&art 0x1000>;
+};
diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
index 3db4d2a994..2573f66f4a 100644
--- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
+++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
@@ -9,6 +9,10 @@ board=$(board_name)
case "$FIRMWARE" in
"ath9k-eeprom-ahb-18100000.wmac.bin")
case $board in
+ 8dev,lima|\
+ ubnt,unifi)
+ caldata_extract "art" 0x1000 0x800
+ ;;
avm,fritz1750e|\
avm,fritz4020|\
avm,fritz450e|\
@@ -110,9 +114,6 @@ case "$FIRMWARE" in
ubnt,rocket-m)
caldata_extract "art" 0x1000 0x1000
;;
- ubnt,unifi)
- caldata_extract "art" 0x1000 0x800
- ;;
wd,mynet-n750)
caldata_extract "art" 0x5000 0x440
ath9k_patch_mac $(mtd_get_mac_ascii devdata "wlan5mac")
diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk
index 0e7efa32af..d8cac425e8 100644
--- a/target/linux/ath79/image/generic.mk
+++ b/target/linux/ath79/image/generic.mk
@@ -152,6 +152,16 @@ define Device/8dev_carambola2
endef
TARGET_DEVICES += 8dev_carambola2
+define Device/8dev_lima
+ SOC := qca9531
+ DEVICE_VENDOR := 8devices
+ DEVICE_MODEL := Lima
+ DEVICE_PACKAGES := kmod-usb2
+ IMAGE_SIZE := 15616k
+ SUPPORTED_DEVICES += lima
+endef
+TARGET_DEVICES += 8dev_lima
+
define Device/adtran_bsap1880
SOC := ar7161
DEVICE_VENDOR := Adtran/Bluesocket