aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorJo-Philipp Wich <jo@mein.io>2020-08-06 19:13:01 +0200
committerJo-Philipp Wich <jo@mein.io>2020-08-06 19:13:21 +0200
commitf85bc0d77d6106e1dfe96773656ff479ee0aefa1 (patch)
tree4cfbd4c71b7be9cc4de216e19e763d88191d4131
parent48f2596e780fa577e269d68179441d5edb22d68f (diff)
downloadupstream-f85bc0d77d6106e1dfe96773656ff479ee0aefa1.tar.gz
upstream-f85bc0d77d6106e1dfe96773656ff479ee0aefa1.tar.bz2
upstream-f85bc0d77d6106e1dfe96773656ff479ee0aefa1.zip
Revert "add vfconfig"
This reverts commit 34553e8cc9ad4530d3f52c3423e5c52fdacac539. This commit was not meant to go into master. Signed-off-by: Jo-Philipp Wich <jo@mein.io>
-rw-r--r--package/network/config/vfconfig/Makefile40
-rw-r--r--package/network/config/vfconfig/files/vfconfig.hotplug7
-rwxr-xr-xpackage/network/config/vfconfig/files/vfconfig.include11
-rwxr-xr-xpackage/network/config/vfconfig/files/vfconfig.sh234
4 files changed, 0 insertions, 292 deletions
diff --git a/package/network/config/vfconfig/Makefile b/package/network/config/vfconfig/Makefile
deleted file mode 100644
index 1fb62d728f..0000000000
--- a/package/network/config/vfconfig/Makefile
+++ /dev/null
@@ -1,40 +0,0 @@
-include $(TOPDIR)/rules.mk
-
-PKG_NAME:=vfconfig
-PKG_RELEASE:=1
-PKG_LICENSE:=GPL-2.0
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/vfconfig
- SECTION:=net
- CATEGORY:=Network
- MAINTAINER:=Jo-Philipp Wich <jo@mein.io>
- TITLE:=UCI configuration support for VLAN filtering rules
- DEPENDS:= +ip-bridge +ip-full
- PKGARCH:=all
-endef
-
-define Package/vfconfig/description
- This package provides UCI configuration abstraction for VLAN filter rules
- on top of Linux bridge interfaces.
-endef
-
-define Build/Compile
-endef
-
-define Build/Configure
-endef
-
-define Package/vfconfig/install
- $(INSTALL_DIR) $(1)/etc/hotplug.d/iface
- $(INSTALL_DATA) ./files/vfconfig.hotplug $(1)/etc/hotplug.d/iface/01-vfconfig
-
- $(INSTALL_DIR) $(1)/lib/network
- $(INSTALL_DATA) ./files/vfconfig.include $(1)/lib/network/vfconfig.sh
-
- $(INSTALL_DIR) $(1)/sbin
- $(INSTALL_BIN) ./files/vfconfig.sh $(1)/sbin/vfconfig
-endef
-
-$(eval $(call BuildPackage,vfconfig))
diff --git a/package/network/config/vfconfig/files/vfconfig.hotplug b/package/network/config/vfconfig/files/vfconfig.hotplug
deleted file mode 100644
index fc2a489dea..0000000000
--- a/package/network/config/vfconfig/files/vfconfig.hotplug
+++ /dev/null
@@ -1,7 +0,0 @@
-#!/bin/sh
-
-if [ "$ACTION" = ifup ] && [ "$INTERFACE" = loopback ]; then
- . /lib/network/dsaconfig.sh
- setup_switch
-fi
-
diff --git a/package/network/config/vfconfig/files/vfconfig.include b/package/network/config/vfconfig/files/vfconfig.include
deleted file mode 100755
index 4ac11d8061..0000000000
--- a/package/network/config/vfconfig/files/vfconfig.include
+++ /dev/null
@@ -1,11 +0,0 @@
-#!/bin/sh
-
-setup_switch() {
- # Skip switch setup on network restart. The netifd process
- # will be started afterwards and remove all interfaces again...
- if [ "$initscript" = /etc/init.d/network ] && [ "$action" = restart ]; then
- return 0
- fi
-
- /sbin/dsaconfig apply 2>&1 | logger -t dsaconfig
-}
diff --git a/package/network/config/vfconfig/files/vfconfig.sh b/package/network/config/vfconfig/files/vfconfig.sh
deleted file mode 100755
index 5a73c62b27..0000000000
--- a/package/network/config/vfconfig/files/vfconfig.sh
+++ /dev/null
@@ -1,234 +0,0 @@
-#!/bin/sh
-
-. /lib/functions.sh
-. /lib/functions/network.sh
-
-bridge_names=""
-
-warn() {
- echo "$@" >&2
-}
-
-clear_port_vlans() {
- local port=$1
- local self=$2
- local vlans=$(bridge vlan show dev "$port" | sed -ne 's#^[^ ]* \+\([0-9]\+\).*$#\1#p')
-
- local vlan
- for vlan in $vlans; do
- bridge vlan del vid "$vlan" dev "$port" $self
- done
-}
-
-add_bridge() {
- local cfg=$1
- local brname
-
- config_get brname "$cfg" bridge "switch0"
-
- case " $bridge_names " in
- *" $brname "*) return 1 ;;
- esac
-
- append bridge_names "$brname"
-
- export -n "bridge=$brname"
-}
-
-validate_vid() {
- local vid=$1
-
- case "$vid" in
- [1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-4][0-9][0-9][0-9])
- if [ $vid -gt 4096 ]; then
- return 1
- fi
- ;;
- *)
- return 1
- ;;
- esac
-
- return 0
-}
-
-setup_bridge() {
- local cfg=$1
- local bridge
-
- add_bridge "$cfg" || return 0
-
- # Prevent netifd from picking up our switch bridge just yet
- network_defer_device "$bridge"
-
- # (Re)create switch bridge device in case it is not yet set up
- local filtering=$(cat "/sys/class/net/$bridge/bridge/vlan_filtering" 2>/dev/null)
- if [ ${filtering:-0} != 1 ]; then
- ip link set "$bridge" down 2>/dev/null
- ip link delete dev "$bridge" 2>/dev/null
- ip link add name "$bridge" type bridge
- echo 1 > "/sys/class/net/$bridge/bridge/vlan_filtering"
- fi
-
- ip link set "$bridge" up
-
- # Unbridge DSA ports and flush any VLAN filters on them, they're added back later
- local port
- for port in /sys/class/net/*"/upper_${cfg}"; do
- if [ -e "$port" ]; then
- port=${port%/upper_*}
- port=${port##*/}
-
- ip link set "$port" nomaster
-
- # Unbridging the port should already clear VLANs, but be safe
- clear_port_vlans "$port"
- fi
- done
-
- # Clear any VLANs on the switch bridge, they're added back later
- clear_port_vlans "$bridge" self
-}
-
-setup_bridge_vlan() {
- local cfg=$1
- local bridge vlan ports
-
- config_get bridge "$cfg" bridge "switch0"
- config_get vlan "$cfg" vlan
- config_get ports "$cfg" ports
-
- validate_vid "$vlan" || {
- warn "VLAN section '$cfg' specifies an invalid VLAN ID '$vlan'"
- return 1
- }
-
- # Setup ports
- local port tag pvid
- for port in $ports; do
- tag=untagged
- pvid=
-
- case "$port" in
- *"*")
- pvid=pvid
- port=${port%\*}
- ;;
- esac
-
- case "$port" in
- *:u)
- port=${port%:u}
- ;;
- *:t)
- tag=tagged
- port=${port%:t}
- ;;
- esac
-
- # Add the port to the switch bridge and delete the default
- # VLAN 1 if it is not yet joined to the bridge.
- if [ ! -e "/sys/class/net/$port/upper_$bridge" ]; then
- ip link set dev "$port" up
- ip link set dev "$port" master "$bridge"
-
- # Get rid of default VLAN 1
- bridge vlan del vid 1 dev "$port"
- fi
-
- # Promote the first untagged VLAN of this port to the PVID
- if [ "$tag" = untagged ] && ! bridge vlan show dev "$port" | grep -qi pvid; then
- pvid=pvid
- fi
-
- # Add VLAN filter entry for port
- bridge vlan add dev "$port" vid $vlan $pvid $tag
- done
-
- # Make the switch bridge itself handle the VLAN as well
- bridge vlan add dev "$bridge" self vid $vlan tagged
-}
-
-apply_config() {
- config_load network
- config_foreach setup_bridge vlan_filter
- config_foreach setup_bridge_vlan vlan_filter
-
- # Ready switch bridge devices
- local bridge
- for bridge in $bridge_names; do
- network_ready_device "$bridge"
- done
-}
-
-show_bridge() {
- local cfg=$1
- local bridge
-
- add_bridge "$cfg" || return 0
-
- printf "Bridge: %s\n" "$bridge"
- printf "VLAN/"
-
- local port ports
- for port in "/sys/class/net/$bridge/lower_"*; do
- [ -e "$port" ] || continue
-
- port=${port##*/lower_}
-
- printf " | %-5s" "$port"
- append ports "$port"
- done
-
- printf " |\nLink:"
-
- for port in $ports; do
- local carrier=$(cat "/sys/class/net/$port/carrier")
- local duplex=$(cat "/sys/class/net/$port/duplex")
- local speed=$(cat "/sys/class/net/$port/speed")
-
- if [ ${carrier:-0} -eq 0 ]; then
- printf " | %-5s" "down"
- else
- [ "$duplex" = "full" ] && duplex=F || duplex=H
- printf " | %4d%s" "$speed" "$duplex"
- fi
- done
-
- local vlans=$(bridge vlan show dev "$bridge" | sed -ne 's#^[^ ]* \+\([0-9]\+\).*$#\1#p')
- local vlan
- for vlan in $vlans; do
- printf " |\n%4d " "$vlan"
-
- for port in $ports; do
- local pvid="" utag="" word
- for word in $(bridge vlan show dev "$port" vid "$vlan"); do
- case "$word" in
- PVID) pvid="*" ;;
- "$vlan") utag="t" ;;
- Untagged) utag="u" ;;
- esac
- done
-
- printf " | %-2s " "$utag$pvid"
- done
- done
-
- printf " |\n\n"
-}
-
-show_config() {
- config_load network
- config_foreach show_bridge vlan_filter
-}
-
-
-case "$1" in
- show) show_config ;;
- apply) apply_config ;;
- *)
- echo "Usage: ${0##*/} show"
- echo " ${0##*/} apply"
- exit 1
- ;;
-esac