diff options
| author | Sungbo Eo <mans0n@gorani.run> | 2019-11-12 01:26:44 +0900 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2019-12-13 15:37:37 +0100 |
| commit | 0375c076b67cda9dc1b758b87ab1b79fd2403d94 (patch) | |
| tree | 7ff5091a44f06edd3d398831c1718ec34e6edc38 /Config.in | |
| parent | 69fff339e965d508b4fc12ffdc2a170efe9c98b1 (diff) | |
| download | upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.tar.gz upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.tar.bz2 upstream-0375c076b67cda9dc1b758b87ab1b79fd2403d94.zip | |
ramips: add support for ZIO FREEZIO
ZIO FREEZIO is a 2.4/5GHz band AC1200 router, based on MediaTek MT7621A.
Specifications:
- SoC: MT7621AT
- RAM: DDR3 128MB
- Flash: SPI NOR 16MB
- WiFi:
- 2.4GHz: MT7603EN
- 5GHz: MT7612EN
- Ethernet: 5x 10/100/1000Mbps
- Switch: SoC internal
- USB: 1x 3.0
- UART:
- J4: 3.3V, RX, TX, GND (3.3V is the square pad) / 57600 8N1
Notes:
- FREEZIO has almost the same board as WeVO W2914NS v2.
- Stock firmware is based on OpenWrt BB.
MAC addresses in factory partition:
0x0004: WiFi 2.4GHz (label_mac-8)
0x002e: WAN (label_mac)
0x8004: WiFi 5GHz (label_mac-4)
0xe000: LAN (label_mac+1)
Installation via web interface:
1. Access web admin page and turn on "OpenWrt UI mode".
2. Flash sysupgrade image through LuCI, with the "Keep settings" option
OFF.
Revert to stock firmware:
1. Perform sysupgrade with stock image.
Make sure to NOT preserve settings.
Signed-off-by: Sungbo Eo <mans0n@gorani.run>
[rebase, use mt7621_wevo_w2914ns-v2.dtsi]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'Config.in')
0 files changed, 0 insertions, 0 deletions