aboutsummaryrefslogtreecommitdiffstats
path: root/Makefile
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-04-12 13:33:01 +0200
committerDavid Bauer <mail@david-bauer.net>2020-04-17 13:27:40 +0200
commit8918c038f330a1bb5a898d80c170caf9f42cac89 (patch)
tree260be3b1073f927d1230430c5a8da073a22327a5 /Makefile
parentd883eaacd428e1231554687e9875248291a004cc (diff)
downloadupstream-8918c038f330a1bb5a898d80c170caf9f42cac89.tar.gz
upstream-8918c038f330a1bb5a898d80c170caf9f42cac89.tar.bz2
upstream-8918c038f330a1bb5a898d80c170caf9f42cac89.zip
ath79: add support for AVM FRITZ!WLAN Repeater 1750E
This commit adds support for the AVM Fritz!WLAN Repeater 1750E SOC: Qualcomm QCA9556 (Scorpion) 720MHz MIPS74Kc RAM: 64MB Zentel A3R12E40CBF DDR2 FLASH: 16MiB Winbond W25Q128 SPI NOR WLAN1: QCA9556 2.4 GHz 802.11b/g/n 3x3 WLAN2: QCA9880 5 GHz 802.11 n/ac 3x3 INPUT: WPS button LED: Power, WiFi, LAN, RSSI indicator Serial: Header Next to Black metal shield Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V) The Serial setting is 115200-8-N-1. Tested and working: - Ethernet - 2.4 GHz WiFi (correct MAC) - 5 GHz WiFi (correct MAC) - Installation via EVA bootloader - OpenWRT sysupgrade - Buttons - LEDs Installation via EVA: In the first seconds after Power is connected, the bootloader will listen for FTP connections on 192.168.178.1. Firmware can be uploaded like following: ftp> quote USER adam2 ftp> quote PASS adam2 ftp> binary ftp> debug ftp> passive ftp> quote MEDIA FLSH ftp> put openwrt-sysupgrade.bin mtd1 Note that this procedure might take up to two minutes. You need to powercycle the Device afterwards to boot OpenWRT. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'Makefile')
0 files changed, 0 insertions, 0 deletions