aboutsummaryrefslogtreecommitdiffstats
path: root/include/quilt.mk
diff options
context:
space:
mode:
authorAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-18 00:08:18 +0100
committerAdrian Schmutzler <freifunk@adrianschmutzler.de>2020-02-19 23:20:09 +0100
commit6fdaf16dd0623db1a324d33fdf0bc1654365ee62 (patch)
treea08caa7dc639e3b4972950c5f449d9104dcf0d9b /include/quilt.mk
parentb56bcfe3be40493daecf13a4080920de2994ff54 (diff)
downloadupstream-6fdaf16dd0623db1a324d33fdf0bc1654365ee62.tar.gz
upstream-6fdaf16dd0623db1a324d33fdf0bc1654365ee62.tar.bz2
upstream-6fdaf16dd0623db1a324d33fdf0bc1654365ee62.zip
ath79: add support for Ubiquiti Picostation M (XM)
This adds support for the Ubiquiti Picostation M (XM), which has the same board/LEDs as the Bullet M XM, but different case and antennas. Specifications: - AR7241 SoC @ 400 MHz - 32 MB RAM - 8 MB SPI flash - 1x 10/100 Mbps Ethernet, 24 Vdc PoE-in - External antenna: 5 dBi (USA), 2 dBi (EU) - POWER/LAN green LEDs - 4x RSSI LEDs (red, orange, green, green) - UART (115200 8N1) on PCB Flashing via WebUI: Upload the factory image via the stock firmware web UI. Attention: airOS firmware versions >= 5.6 have a new bootloader with an incompatible partition table! Please downgrade to <= 5.5 _before_ flashing OpenWrt! Refer to the device's Wiki page for further information. Flashing via TFTP: Same procedure as other NanoStation M boards. - Use a pointy tool (e.g., pen cap, paper clip) and keep the reset button on the device or on the PoE supply pressed - Power on the device via PoE (keep reset button pressed) - Keep pressing until LEDs flash alternatively LED1+LED3 => LED2+LED4 => LED1+LED3, etc. - Release reset button - The device starts a TFTP server at 192.168.1.20 - Set a static IP on the computer (e.g., 192.168.1.21/24) - Upload via tftp the factory image: $ tftp 192.168.1.20 tftp> bin tftp> trace tftp> put openwrt-ath79-generic-xxxxx-ubnt_picostation-m-squashfs-factory.bin Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'include/quilt.mk')
0 files changed, 0 insertions, 0 deletions