diff options
| author | Pawel Dembicki <paweldembicki@gmail.com> | 2020-08-24 14:29:32 +0200 |
|---|---|---|
| committer | Adrian Schmutzler <freifunk@adrianschmutzler.de> | 2020-10-26 00:40:12 +0100 |
| commit | a254279a6c3048feb83909649c41ee4a7d37ec93 (patch) | |
| tree | bc6d544a7d45fbf6f7362f28289c1d94dd894e38 /package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt | |
| parent | c51f8030b623e03567a73fbcedc4ee69a8896688 (diff) | |
| download | upstream-a254279a6c3048feb83909649c41ee4a7d37ec93.tar.gz upstream-a254279a6c3048feb83909649c41ee4a7d37ec93.tar.bz2 upstream-a254279a6c3048feb83909649c41ee4a7d37ec93.zip | |
layerscape: Change to combined rootfs on sd images
At this moment layerscape images are ext4 only. It causes problem with
save changes durring sysupgrade and make "firstboot" and failsafe mode
useless.
This patch changes sd-card images to squashfs + f2fs combined images.
To make place, for saving config, kernel space ar now ext4 partition
with fit kernel.
This method of image generation is similar to rest of OpenWrt sd-card
targets.
Reviewed-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Diffstat (limited to 'package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt')
| -rw-r--r-- | package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt index 7772daa100..ed8661bc6e 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt @@ -1,8 +1,8 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffff +fdt_high=0x8fffffff initrd_high=0xffffffff -sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr} -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run sd_boot bootdelay=3 |