layerscape: add 64b/32b target for ls1012ardb device

The QorIQ LS1012A processor, optimized for battery-backed or
USB-powered, integrates a single ARM Cortex-A53 core with a hardware
packet forwarding engine and high-speed interfaces to deliver
line-rate networking performance.
QorIQ LS1012A Reference Design System (LS1012ARDB) is a high-performance
development platform, with a complete debugging environment.
The LS1012ARDB board supports the QorIQ LS1012A processor and is
optimized to support the high-bandwidth DDR3L memory and
a full complement of high-speed SerDes ports.

LEDE/OPENWRT will auto strip executable program file while make. So we
need select CONFIG_NO_STRIP=y while make menuconfig to avoid the ppfe network
fiemware be destroyed, then run make to build ls1012ardb firmware.

The fsl-quadspi flash with jffs2 fs is unstable and arise some failed message.
This issue have noticed the IP owner for investigate, hope he can solve it
earlier. So the ls1012ardb now also provide a xx-firmware.ext4.bin as default
firmware, and the uboot bootcmd will run wrtboot_ext4rfs for "rootfstype=ext4"
bootargs.

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>

1 files changed, 7589 insertions, 0 deletions

diff --git a/package/boot/uboot-layerscape/patches/0041-DNCPE-4-LS1012A-PPFE-driver.patch b/package/boot/uboot-layerscape/patches/0041-DNCPE-4-LS1012A-PPFE-driver.patch
new file mode 100644
index 0000000000..f2b157c3fc
--- /dev/null
+++ b/package/boot/uboot-layerscape/patches/0041-DNCPE-4-LS1012A-PPFE-driver.patch
@@ -0,0 +1,7589 @@
+From 487b9b2e5c767ee2110cce57539f0ebeb5a74872 Mon Sep 17 00:00:00 2001
+From: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+Date: Tue, 24 May 2016 14:05:18 +0530
+Subject: [PATCH 41/93] DNCPE-4: LS1012A PPFE driver
+
+[context adjustment]
+
+- Ported PFE driver from LS1024
+- Did changes for GEMAC/MDIO/PHY
+- LS1012A address translation changes
+- Added pfe command  to the U-boot.
+- Added gemac_stat command
+- Added config PFE_START to conditionally start pfe on bootup time.
+- Change Rx packet ack model
+- Class firmware changes to ignore Rx error status
+
+- SCFG changes for pfe
+- Configure CCI-400 QoS settings
+- Configure transaction attributes
+- Configure RGMII port config
+
+Testing status on board
+
+RGMII - Works fine, can download file through tftp.
+SGMII - CRC errors are seen, but basic rx/tx works.
+
+Signed-off-by: Anjaneyulu Jagarlmudi <anji.jagarlmudi@nxp.com>>
+Signed-off-by: Prabhakar Kushwaha <prabhakar.kushwaha@nxp.com>
+Integrated-by: Jiang Yutang <yutang.jiang@nxp.com>
+---
+ arch/arm/cpu/armv8/fsl-layerscape/cpu.c            |    5 +
+ .../include/asm/arch-fsl-layerscape/immap_lsch2.h  |   42 +-
+ board/freescale/ls1012aqds/Makefile                |    1 +
+ board/freescale/ls1012aqds/eth.c                   |  199 +++
+ board/freescale/ls1012aqds/ls1012aqds.c            |    5 -
+ board/freescale/ls1012aqds/ls1012aqds.h            |  149 ++
+ board/freescale/ls1012aqds/ls1012aqds_qixis.h      |    2 +-
+ board/freescale/ls1012ardb/Makefile                |    1 +
+ board/freescale/ls1012ardb/eth.c                   |   68 +
+ board/freescale/ls1012ardb/ls1012ardb.c            |    4 -
+ common/Makefile                                    |    2 +
+ common/cmd_gemac_stat.c                            |  147 ++
+ common/cmd_pfe_commands.c                          |  983 ++++++++++++
+ drivers/net/Makefile                               |    1 +
+ drivers/net/pfe_eth/Makefile                       |    1 +
+ drivers/net/pfe_eth/class_sbl_elf.fw               |    1 +
+ drivers/net/pfe_eth/hal.h                          |   64 +
+ drivers/net/pfe_eth/pfe.c                          | 1677 ++++++++++++++++++++
+ drivers/net/pfe_eth/pfe/cbus.h                     |   74 +
+ drivers/net/pfe_eth/pfe/cbus/bmu.h                 |   37 +
+ drivers/net/pfe_eth/pfe/cbus/class_csr.h           |  206 +++
+ drivers/net/pfe_eth/pfe/cbus/emac.h                |  232 +++
+ drivers/net/pfe_eth/pfe/cbus/gpi.h                 |   60 +
+ drivers/net/pfe_eth/pfe/cbus/gpt.h                 |   11 +
+ drivers/net/pfe_eth/pfe/cbus/hif.h                 |   62 +
+ drivers/net/pfe_eth/pfe/cbus/hif_nocpy.h           |   33 +
+ drivers/net/pfe_eth/pfe/cbus/tmu_csr.h             |  102 ++
+ drivers/net/pfe_eth/pfe/cbus/util_csr.h            |   43 +
+ drivers/net/pfe_eth/pfe/class.h                    |  142 ++
+ drivers/net/pfe_eth/pfe/class/ccu.h                |   10 +
+ drivers/net/pfe_eth/pfe/class/efet.h               |   21 +
+ drivers/net/pfe_eth/pfe/class/mac_hash.h           |   28 +
+ drivers/net/pfe_eth/pfe/class/perg.h               |   21 +
+ drivers/net/pfe_eth/pfe/class/vlan_hash.h          |   28 +
+ drivers/net/pfe_eth/pfe/gpt.h                      |   11 +
+ drivers/net/pfe_eth/pfe/pe.h                       |  147 ++
+ drivers/net/pfe_eth/pfe/pfe.h                      |  250 +++
+ drivers/net/pfe_eth/pfe/tmu.h                      |   48 +
+ drivers/net/pfe_eth/pfe/tmu/phy_queue.h            |   31 +
+ drivers/net/pfe_eth/pfe/tmu/sched.h                |   47 +
+ drivers/net/pfe_eth/pfe/tmu/shaper.h               |   19 +
+ drivers/net/pfe_eth/pfe/uart.h                     |   13 +
+ drivers/net/pfe_eth/pfe/util.h                     |   30 +
+ drivers/net/pfe_eth/pfe/util/eape.h                |   10 +
+ drivers/net/pfe_eth/pfe/util/efet.h                |   20 +
+ drivers/net/pfe_eth/pfe/util/inq.h                 |   10 +
+ drivers/net/pfe_eth/pfe_driver.c                   |  710 +++++++++
+ drivers/net/pfe_eth/pfe_driver.h                   |  141 ++
+ drivers/net/pfe_eth/pfe_eth.c                      |  521 ++++++
+ drivers/net/pfe_eth/pfe_eth.h                      |  161 ++
+ drivers/net/pfe_eth/pfe_firmware.c                 |  193 +++
+ drivers/net/pfe_eth/pfe_firmware.h                 |   20 +
+ drivers/net/pfe_eth/pfe_mod.h                      |  140 ++
+ drivers/net/pfe_eth/tmu_sbl_elf.fw                 |    1 +
+ drivers/net/pfe_eth/util_sbl_elf.fw                |    1 +
+ include/configs/ls1012a_common.h                   |   10 +
+ include/configs/ls1012aqds.h                       |   13 +-
+ include/configs/ls1012ardb.h                       |    6 +-
+ 58 files changed, 6994 insertions(+), 21 deletions(-)
+ create mode 100644 board/freescale/ls1012aqds/eth.c
+ create mode 100644 board/freescale/ls1012aqds/ls1012aqds.h
+ create mode 100644 board/freescale/ls1012ardb/eth.c
+ create mode 100644 common/cmd_gemac_stat.c
+ create mode 100644 common/cmd_pfe_commands.c
+ create mode 100644 drivers/net/pfe_eth/Makefile
+ create mode 100644 drivers/net/pfe_eth/class_sbl_elf.fw
+ create mode 100644 drivers/net/pfe_eth/hal.h
+ create mode 100644 drivers/net/pfe_eth/pfe.c
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/bmu.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/class_csr.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/emac.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/gpi.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/gpt.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/hif.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/hif_nocpy.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
+ create mode 100644 drivers/net/pfe_eth/pfe/cbus/util_csr.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class/ccu.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class/efet.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class/mac_hash.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class/perg.h
+ create mode 100644 drivers/net/pfe_eth/pfe/class/vlan_hash.h
+ create mode 100644 drivers/net/pfe_eth/pfe/gpt.h
+ create mode 100644 drivers/net/pfe_eth/pfe/pe.h
+ create mode 100644 drivers/net/pfe_eth/pfe/pfe.h
+ create mode 100644 drivers/net/pfe_eth/pfe/tmu.h
+ create mode 100644 drivers/net/pfe_eth/pfe/tmu/phy_queue.h
+ create mode 100644 drivers/net/pfe_eth/pfe/tmu/sched.h
+ create mode 100644 drivers/net/pfe_eth/pfe/tmu/shaper.h
+ create mode 100644 drivers/net/pfe_eth/pfe/uart.h
+ create mode 100644 drivers/net/pfe_eth/pfe/util.h
+ create mode 100644 drivers/net/pfe_eth/pfe/util/eape.h
+ create mode 100644 drivers/net/pfe_eth/pfe/util/efet.h
+ create mode 100644 drivers/net/pfe_eth/pfe/util/inq.h
+ create mode 100644 drivers/net/pfe_eth/pfe_driver.c
+ create mode 100644 drivers/net/pfe_eth/pfe_driver.h
+ create mode 100644 drivers/net/pfe_eth/pfe_eth.c
+ create mode 100644 drivers/net/pfe_eth/pfe_eth.h
+ create mode 100644 drivers/net/pfe_eth/pfe_firmware.c
+ create mode 100644 drivers/net/pfe_eth/pfe_firmware.h
+ create mode 100644 drivers/net/pfe_eth/pfe_mod.h
+ create mode 100644 drivers/net/pfe_eth/tmu_sbl_elf.fw
+ create mode 100644 drivers/net/pfe_eth/util_sbl_elf.fw
+
+diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+index 340d9f9..8f59577 100644
+--- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
++++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c
+@@ -573,6 +573,11 @@ int cpu_eth_init(bd_t *bis)
+ {
+ 	int error = 0;
+ 
++#if defined(CONFIG_FSL_PPFE) && !defined(CONFIG_CMD_PFE_START)
++	ls1012a_gemac_initialize(bis, 0 , "pfe_eth0");
++	ls1012a_gemac_initialize(bis, 1 , "pfe_eth1");
++#endif
++
+ #ifdef CONFIG_FSL_MC_ENET
+ 	error = fsl_mc_ldpaa_init(bis);
+ #endif
+diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+index 6918757..a264f9a 100644
+--- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
++++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch2.h
+@@ -41,6 +41,7 @@
+ #define CONFIG_SYS_PCIE1_ADDR			(CONFIG_SYS_IMMR + 0x2400000)
+ #define CONFIG_SYS_PCIE2_ADDR			(CONFIG_SYS_IMMR + 0x2500000)
+ #define CONFIG_SYS_PCIE3_ADDR			(CONFIG_SYS_IMMR + 0x2600000)
++#define CONFIG_SYS_PPFE_ADDR			(CONFIG_SYS_IMMR + 0x3000000)
+ #define CONFIG_SYS_SEC_MON_ADDR			(CONFIG_SYS_IMMR + 0xe90000)
+ #define CONFIG_SYS_SFP_ADDR			(CONFIG_SYS_IMMR + 0xe80200)
+ 
+@@ -364,6 +365,24 @@ struct ccsr_gur {
+ #define SCFG_SNPCNFGCR_USB3RDSNP	0x00002000
+ #define SCFG_SNPCNFGCR_USB3WRSNP	0x00004000
+ 
++/* RGMIIPCR bit definitions*/
++#define SCFG_RGMIIPCR_EN_AUTO		(0x00000008)
++#define SCFG_RGMIIPCR_SETSP_1000M	(0x00000004)
++#define SCFG_RGMIIPCR_SETSP_100M	(0x00000000)
++#define SCFG_RGMIIPCR_SETSP_10M		(0x00000002)
++#define SCFG_RGMIIPCR_SETFD		(0x00000001)
++
++/*PFEASBCR bit definitions */
++#define SCFG_PPFEASBCR_ARCACHE0		(0x80000000)
++#define SCFG_PPFEASBCR_AWCACHE0		(0x40000000)
++#define SCFG_PPFEASBCR_ARCACHE1		(0x20000000)
++#define SCFG_PPFEASBCR_AWCACHE1		(0x10000000)
++#define SCFG_PPFEASBCR_ARSNP		(0x08000000)
++#define SCFG_PPFEASBCR_AWSNP		(0x04000000)
++
++
++
++
+ /* Supplemental Configuration Unit */
+ struct ccsr_scfg {
+ 	u8 res_000[0x100-0x000];
+@@ -381,7 +400,12 @@ struct ccsr_scfg {
+ 	u8 res_140[0x158-0x140];
+ 	u32 altcbar;
+ 	u32 qspi_cfg;
+-	u8 res_160[0x180-0x160];
++	u8 res_160[0x164-0x160];
++	u32 wr_qos1;
++	u32 wr_qos2;
++	u32 rd_qos1;
++	u32 rd_qos2;
++	u8 res_174[0x180-0x174];
+ 	u32 dmamcr;
+ 	u8 res_184[0x18c-0x184];
+ 	u32 debug_icid;
+@@ -411,7 +435,21 @@ struct ccsr_scfg {
+ 	u32 usb_refclk_selcr1;
+ 	u32 usb_refclk_selcr2;
+ 	u32 usb_refclk_selcr3;
+-	u8 res_424[0x600-0x424];
++	u8 res_424[0x434-0x424];
++	u32 rgmiipcr;
++	u32 res_438;
++	u32 rgmiipsr;
++	u32 pfepfcssr1;
++	u32 pfeintencr1;
++	u32 pfepfcssr2;
++	u32 pfeintencr2;
++	u32 pfeerrcr;
++	u32 pfeeerrintencr;
++	u32 pfeasbcr;
++	u32 pfebsbcr;
++	u8 res_460[0x484-0x460];
++	u32 mdioselcr;
++	u8 res_468[0x600-0x468];
+ 	u32 scratchrw[4];
+ 	u8 res_610[0x680-0x610];
+ 	u32 corebcr;
+diff --git a/board/freescale/ls1012aqds/Makefile b/board/freescale/ls1012aqds/Makefile
+index 0b813f9..b18494a 100644
+--- a/board/freescale/ls1012aqds/Makefile
++++ b/board/freescale/ls1012aqds/Makefile
+@@ -5,3 +5,4 @@
+ #
+ 
+ obj-y += ls1012aqds.o
++obj-y += eth.o
+diff --git a/board/freescale/ls1012aqds/eth.c b/board/freescale/ls1012aqds/eth.c
+new file mode 100644
+index 0000000..1bd7c9d
+--- /dev/null
++++ b/board/freescale/ls1012aqds/eth.c
+@@ -0,0 +1,199 @@
++/*
++ * Copyright 2016 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <netdev.h>
++#include <fm_eth.h>
++#include <fsl_mdio.h>
++#include <malloc.h>
++#include <fsl_dtsec.h>
++#include <asm/arch/soc.h>
++#include <asm/arch-fsl-layerscape/config.h>
++#include <asm/arch/fsl_serdes.h>
++
++#include "../common/qixis.h"
++#include "../../../drivers/net/pfe_eth/pfe_eth.h"
++#include "ls1012aqds_qixis.h"
++#include <asm/arch-fsl-layerscape/immap_lsch2.h>
++
++#define EMI_NONE	0xFF
++#define EMI1_RGMII	1
++#define EMI1_SLOT1	2
++#define EMI1_SLOT2	3
++
++#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
++
++static int mdio_mux[NUM_FM_PORTS];
++
++static const char * const mdio_names[] = {
++	"NULL",
++	"LS1012AQDS_MDIO_RGMII",
++	"LS1012AQDS_MDIO_SLOT1",
++	"LS1012AQDS_MDIO_SLOT2",
++	"NULL",
++};
++
++static const char *ls1012aqds_mdio_name_for_muxval(u8 muxval)
++{
++	return mdio_names[muxval];
++}
++
++struct ls1012aqds_mdio {
++	u8 muxval;
++	struct mii_dev *realbus;
++};
++
++static void ls1012aqds_mux_mdio(u8 muxval)
++{
++	u8 brdcfg4;
++
++	if (muxval < 7) {
++		brdcfg4 = QIXIS_READ(brdcfg[4]);
++		brdcfg4 &= ~BRDCFG4_EMISEL_MASK;
++		brdcfg4 |= (muxval << BRDCFG4_EMISEL_SHIFT);
++		QIXIS_WRITE(brdcfg[4], brdcfg4);
++	}
++}
++
++static int ls1012aqds_mdio_read(struct mii_dev *bus, int addr, int devad,
++			      int regnum)
++{
++	struct ls1012aqds_mdio *priv = bus->priv;
++
++	ls1012aqds_mux_mdio(priv->muxval);
++
++	return priv->realbus->read(priv->realbus, addr, devad, regnum);
++}
++
++static int ls1012aqds_mdio_write(struct mii_dev *bus, int addr, int devad,
++			       int regnum, u16 value)
++{
++	struct ls1012aqds_mdio *priv = bus->priv;
++
++	ls1012aqds_mux_mdio(priv->muxval);
++
++	return priv->realbus->write(priv->realbus, addr, devad, regnum, value);
++}
++
++static int ls1012aqds_mdio_reset(struct mii_dev *bus)
++{
++	struct ls1012aqds_mdio *priv = bus->priv;
++
++	if(priv->realbus->reset)
++		return priv->realbus->reset(priv->realbus);
++}
++
++static int ls1012aqds_mdio_init(char *realbusname, u8 muxval)
++{
++	struct ls1012aqds_mdio *pmdio;
++	struct mii_dev *bus = mdio_alloc();
++
++	if (!bus) {
++		printf("Failed to allocate ls1012aqds MDIO bus\n");
++		return -1;
++	}
++
++	pmdio = malloc(sizeof(*pmdio));
++	if (!pmdio) {
++		printf("Failed to allocate ls1012aqds private data\n");
++		free(bus);
++		return -1;
++	}
++
++	bus->read = ls1012aqds_mdio_read;
++	bus->write = ls1012aqds_mdio_write;
++	bus->reset = ls1012aqds_mdio_reset;
++	sprintf(bus->name, ls1012aqds_mdio_name_for_muxval(muxval));
++
++	pmdio->realbus = miiphy_get_dev_by_name(realbusname);
++
++	if (!pmdio->realbus) {
++		printf("No bus with name %s\n", realbusname);
++		free(bus);
++		free(pmdio);
++		return -1;
++	}
++
++	pmdio->muxval = muxval;
++	bus->priv = pmdio;
++	return mdio_register(bus);
++}
++
++int board_eth_init(bd_t *bis)
++{
++#ifdef CONFIG_FSL_PPFE
++        struct mii_dev *bus;
++	struct mdio_info mac1_mdio_info;
++	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
++	u8 data8;
++
++
++	/*TODO Following config should be done for all boards, where is the right place to put this */
++	out_be32(&scfg->pfeasbcr, in_be32(&scfg->pfeasbcr) | SCFG_PPFEASBCR_AWCACHE0);
++	out_be32(&scfg->pfebsbcr, in_be32(&scfg->pfebsbcr) | SCFG_PPFEASBCR_AWCACHE0);
++
++	/*CCI-400 QoS settings for PFE */
++	out_be32(&scfg->wr_qos1, 0x0ff00000);
++	out_be32(&scfg->rd_qos1, 0x0ff00000);
++
++	/* Set RGMII into 1G + Full duplex mode */
++	out_be32(&scfg->rgmiipcr, in_be32(&scfg->rgmiipcr) | (SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETFD));
++
++	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x520), 0xFFFFFFFF);
++	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x524), 0xFFFFFFFF);
++
++	ls1012aqds_mux_mdio(2);
++
++#ifdef RGMII_RESET_WA
++	/* Work around for FPGA registers initialization
++	 * This is needed for RGMII to work */
++	printf("Reset RGMII WA....\n");
++	data8 = QIXIS_READ(rst_frc[0]);
++	data8 |= 0x2;
++	QIXIS_WRITE(rst_frc[0], data8);
++	data8 = QIXIS_READ(rst_frc[0]);
++
++	data8 = QIXIS_READ(res8[6]);
++	data8 |= 0xff;
++	QIXIS_WRITE(res8[6], data8);
++	data8 = QIXIS_READ(res8[6]);
++
++#endif
++
++	mac1_mdio_info.reg_base = (void *)0x04200000; /*EMAC1_BASE_ADDR*/
++	mac1_mdio_info.name = DEFAULT_PFE_MDIO_NAME;
++
++	bus = ls1012a_mdio_init(&mac1_mdio_info);
++	if(!bus)
++	{
++		printf("Failed to register mdio \n");
++		return -1;
++	}
++
++	/*Based on RCW config initialize correctly */
++	/*MAC2 */
++	if(ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_RGMII) < 0)
++	{
++		printf("Failed to register mdio for %s\n", ls1012aqds_mdio_name_for_muxval(EMI1_RGMII));
++		return -1;
++	}
++	ls1012a_set_mdio(1, miiphy_get_dev_by_name(ls1012aqds_mdio_name_for_muxval(EMI1_RGMII)));
++	ls1012a_set_phy_address_mode(1,  EMAC2_PHY_ADDR, PHY_INTERFACE_MODE_RGMII);
++
++	/*MAC1 */
++	if(ls1012aqds_mdio_init(DEFAULT_PFE_MDIO_NAME, EMI1_SLOT1) < 0)
++	{
++		printf("Failed to register mdio for %s\n", ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1));
++		return -1;
++	}
++	ls1012a_set_mdio(0, miiphy_get_dev_by_name(ls1012aqds_mdio_name_for_muxval(EMI1_SLOT1)));
++	ls1012a_set_phy_address_mode(0,  EMAC1_PHY_ADDR, PHY_INTERFACE_MODE_SGMII);
++
++	cpu_eth_init(bis);
++#endif
++	return pci_eth_init(bis);
++}
+diff --git a/board/freescale/ls1012aqds/ls1012aqds.c b/board/freescale/ls1012aqds/ls1012aqds.c
+index 446989b..b7365e8 100644
+--- a/board/freescale/ls1012aqds/ls1012aqds.c
++++ b/board/freescale/ls1012aqds/ls1012aqds.c
+@@ -211,11 +211,6 @@ int board_init(void)
+ 	return 0;
+ }
+ 
+-int board_eth_init(bd_t *bis)
+-{
+-	return pci_eth_init(bis);
+-}
+-
+ #ifdef CONFIG_OF_BOARD_SETUP
+ int ft_board_setup(void *blob, bd_t *bd)
+ {
+diff --git a/board/freescale/ls1012aqds/ls1012aqds.h b/board/freescale/ls1012aqds/ls1012aqds.h
+new file mode 100644
+index 0000000..42e10f5
+--- /dev/null
++++ b/board/freescale/ls1012aqds/ls1012aqds.h
+@@ -0,0 +1,149 @@
++/*
++ * Copyright 2016 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#ifndef __LS1012AQDS_H__
++#define __LS1012AQDS_H__
++
++#include "ls1012a_common.h"
++
++
++#define CONFIG_DIMM_SLOTS_PER_CTLR	1
++#define CONFIG_CHIP_SELECTS_PER_CTRL	1
++#define CONFIG_NR_DRAM_BANKS		2
++
++#ifdef CONFIG_FSL_PPFE
++/*#define CONFIG_CMD_PFE_START */
++#define EMAC1_PHY_ADDR          0x1e
++#define EMAC2_PHY_ADDR          0x1
++#define CONFIG_PHYLIB
++#define CONFIG_PHY_VITESSE
++#define CONFIG_PHY_REALTEK
++#endif
++
++#define CONFIG_QIXIS_I2C_ACCESS
++#define CONFIG_SYS_I2C_FPGA_ADDR	0x66
++
++/*
++ * I2C bus multiplexer
++ */
++#define I2C_MUX_PCA_ADDR_PRI		0x77
++#define I2C_MUX_PCA_ADDR_SEC		0x76 /* Secondary multiplexer */
++#define I2C_RETIMER_ADDR		0x18
++#define I2C_MUX_CH_DEFAULT		0x8
++#define I2C_MUX_CH_CH7301		0xC
++#define I2C_MUX_CH5			0xD
++#define I2C_MUX_CH7			0xF
++
++#define I2C_MUX_CH_VOL_MONITOR 0xa
++
++/*
++* RTC configuration
++*/
++#define RTC
++#define CONFIG_RTC_PCF8563 1
++#define CONFIG_SYS_I2C_RTC_ADDR         0x51  /* Channel 3*/
++#define CONFIG_CMD_DATE
++
++/* EEPROM */
++#define CONFIG_ID_EEPROM
++#define CONFIG_CMD_EEPROM
++#define CONFIG_SYS_I2C_EEPROM_NXID
++#define CONFIG_SYS_EEPROM_BUS_NUM    0
++#define CONFIG_SYS_I2C_EEPROM_ADDR   0x57
++#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN     1
++#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3
++#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5
++
++
++/* Voltage monitor on channel 2*/
++#define I2C_VOL_MONITOR_ADDR           0x40
++#define I2C_VOL_MONITOR_BUS_V_OFFSET   0x2
++#define I2C_VOL_MONITOR_BUS_V_OVF      0x1
++#define I2C_VOL_MONITOR_BUS_V_SHIFT    3
++
++
++/* DSPI */
++#define CONFIG_FSL_DSPI
++#define CONFIG_FSL_DSPI1
++#define CONFIG_DEFAULT_SPI_BUS 1
++
++#define CONFIG_CMD_SPI
++#define MMAP_DSPI          DSPI1_BASE_ADDR
++
++#define CONFIG_SYS_DSPI_CTAR0   1
++
++#define CONFIG_SYS_DSPI_CTAR1	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
++				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
++				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
++				DSPI_CTAR_DT(0))
++#define CONFIG_SPI_FLASH_SST /* cs1 */
++
++#define CONFIG_SYS_DSPI_CTAR2	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
++				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
++				DSPI_CTAR_CSSCK(0) | DSPI_CTAR_ASC(0) | \
++				DSPI_CTAR_DT(0))
++#define CONFIG_SPI_FLASH_STMICRO /* cs2 */
++
++#define CONFIG_SYS_DSPI_CTAR3	(DSPI_CTAR_TRSZ(7) | DSPI_CTAR_PCSSCK_1CLK |\
++				DSPI_CTAR_PASC(0) | DSPI_CTAR_PDT(0) | \
++				DSPI_CTAR_CSSCK(2) | DSPI_CTAR_ASC(0) | \
++				DSPI_CTAR_DT(0))
++#define CONFIG_SPI_FLASH_EON /* cs3 */
++
++#define CONFIG_SF_DEFAULT_SPEED      10000000
++#define CONFIG_SF_DEFAULT_MODE       SPI_MODE_0
++#define CONFIG_SF_DEFAULT_BUS        1
++#define CONFIG_SF_DEFAULT_CS         0
++
++/*
++* USB
++*/
++/* EHCI Support - disbaled by default */
++/*#define CONFIG_HAS_FSL_DR_USB*/
++
++#ifdef CONFIG_HAS_FSL_DR_USB
++#define CONFIG_USB_EHCI
++#define CONFIG_USB_EHCI_FSL
++#define CONFIG_EHCI_HCD_INIT_AFTER_RESET
++#endif
++
++/*XHCI Support - enabled by default*/
++#define CONFIG_HAS_FSL_XHCI_USB
++
++#ifdef CONFIG_HAS_FSL_XHCI_USB
++#define CONFIG_USB_XHCI
++#define CONFIG_USB_XHCI_FSL
++#define CONFIG_USB_XHCI_DWC3
++#define CONFIG_USB_MAX_CONTROLLER_COUNT         1
++#define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
++#define CONFIG_CMD_USB
++#define CONFIG_USB_STORAGE
++#define CONFIG_CMD_EXT2
++
++#define CONFIG_USB_DWC3
++#define CONFIG_USB_DWC3_GADGET
++
++#define CONFIG_USB_GADGET
++#define CONFIG_USB_FUNCTION_MASS_STORAGE
++#define CONFIG_USB_GADGET_DOWNLOAD
++#define CONFIG_USB_GADGET_VBUS_DRAW 2
++#define CONFIG_G_DNL_MANUFACTURER "NXP Semiconductor"
++#define CONFIG_G_DNL_VENDOR_NUM 0x1234
++#define CONFIG_G_DNL_PRODUCT_NUM 0x1234
++#define CONFIG_USB_GADGET_DUALSPEED
++
++/* USB Gadget ums command */
++#define CONFIG_CMD_USB_MASS_STORAGE
++#endif
++
++#define CONFIG_CMD_MEMINFO
++#define CONFIG_CMD_MEMTEST
++#define CONFIG_SYS_MEMTEST_START	0x80000000
++#define CONFIG_SYS_MEMTEST_END		0x9fffffff
++
++#define CONFIG_MISC_INIT_R
++
++#endif /* __LS1012AQDS_H__ */
+diff --git a/board/freescale/ls1012aqds/ls1012aqds_qixis.h b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
+index 584f604..7a1ba3d 100644
+--- a/board/freescale/ls1012aqds/ls1012aqds_qixis.h
++++ b/board/freescale/ls1012aqds/ls1012aqds_qixis.h
+@@ -11,7 +11,7 @@
+ 
+ /* BRDCFG4[4:7] select EC1 and EC2 as a pair */
+ #define BRDCFG4_EMISEL_MASK		0xe0
+-#define BRDCFG4_EMISEL_SHIFT		5
++#define BRDCFG4_EMISEL_SHIFT		6
+ 
+ /* SYSCLK */
+ #define QIXIS_SYSCLK_66			0x0
+diff --git a/board/freescale/ls1012ardb/Makefile b/board/freescale/ls1012ardb/Makefile
+index 05fa9d9..bd80ce5 100644
+--- a/board/freescale/ls1012ardb/Makefile
++++ b/board/freescale/ls1012ardb/Makefile
+@@ -5,3 +5,4 @@
+ #
+ 
+ obj-y += ls1012ardb.o
++obj-y += eth.o
+diff --git a/board/freescale/ls1012ardb/eth.c b/board/freescale/ls1012ardb/eth.c
+new file mode 100644
+index 0000000..29830e8
+--- /dev/null
++++ b/board/freescale/ls1012ardb/eth.c
+@@ -0,0 +1,68 @@
++/*
++ * Copyright 2016 Freescale Semiconductor, Inc.
++ *
++ * SPDX-License-Identifier:	GPL-2.0+
++ */
++
++#include <common.h>
++#include <asm/io.h>
++#include <netdev.h>
++#include <fm_eth.h>
++#include <fsl_mdio.h>
++#include <malloc.h>
++#include <fsl_dtsec.h>
++#include <asm/arch/soc.h>
++#include <asm/arch-fsl-layerscape/config.h>
++#include <asm/arch/fsl_serdes.h>
++
++#include "../../../drivers/net/pfe_eth/pfe_eth.h"
++#include <asm/arch-fsl-layerscape/immap_lsch2.h>
++
++#define DEFAULT_PFE_MDIO_NAME "PFE_MDIO"
++
++int board_eth_init(bd_t *bis)
++{
++#ifdef CONFIG_FSL_PPFE
++        struct mii_dev *bus;
++	struct mdio_info mac1_mdio_info;
++	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
++
++
++	/*TODO Following config should be done for all boards, where is the right place to put this */
++	out_be32(&scfg->pfeasbcr, in_be32(&scfg->pfeasbcr) | SCFG_PPFEASBCR_AWCACHE0);
++	out_be32(&scfg->pfebsbcr, in_be32(&scfg->pfebsbcr) | SCFG_PPFEASBCR_AWCACHE0);
++
++	/*CCI-400 QoS settings for PFE */
++	out_be32(&scfg->wr_qos1, 0x0ff00000);
++	out_be32(&scfg->rd_qos1, 0x0ff00000);
++
++	/* Set RGMII into 1G + Full duplex mode */
++	out_be32(&scfg->rgmiipcr, in_be32(&scfg->rgmiipcr) | (SCFG_RGMIIPCR_SETSP_1000M | SCFG_RGMIIPCR_SETFD));
++
++
++	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x520), 0xFFFFFFFF);
++	out_be32((CONFIG_SYS_DCSR_DCFG_ADDR + 0x524), 0xFFFFFFFF);
++
++	mac1_mdio_info.reg_base = (void *)0x04200000; /*EMAC1_BASE_ADDR*/
++	mac1_mdio_info.name = DEFAULT_PFE_MDIO_NAME;
++
++	bus = ls1012a_mdio_init(&mac1_mdio_info);
++	if(!bus)
++	{
++		printf("Failed to register mdio \n");
++		return -1;
++	}
++
++	/*MAC1 */
++	ls1012a_set_mdio(0, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
++	ls1012a_set_phy_address_mode(0,  EMAC1_PHY_ADDR, PHY_INTERFACE_MODE_SGMII);
++
++	/*MAC2 */
++	ls1012a_set_mdio(1, miiphy_get_dev_by_name(DEFAULT_PFE_MDIO_NAME));
++	ls1012a_set_phy_address_mode(1,  EMAC2_PHY_ADDR, PHY_INTERFACE_MODE_RGMII);
++
++
++	cpu_eth_init(bis);
++#endif
++	return pci_eth_init(bis);
++}
+diff --git a/board/freescale/ls1012ardb/ls1012ardb.c b/board/freescale/ls1012ardb/ls1012ardb.c
+index 347b8c8..90cbd5e 100644
+--- a/board/freescale/ls1012ardb/ls1012ardb.c
++++ b/board/freescale/ls1012ardb/ls1012ardb.c
+@@ -163,10 +163,6 @@ int dram_init(void)
+ 	return 0;
+ }
+ 
+-int board_eth_init(bd_t *bis)
+-{
+-	return pci_eth_init(bis);
+-}
+ 
+ int board_early_init_f(void)
+ {
+diff --git a/common/Makefile b/common/Makefile
+index 2a1d9f8..f5db77e 100644
+--- a/common/Makefile
++++ b/common/Makefile
+@@ -136,6 +136,8 @@ obj-$(CONFIG_CMD_MII) += cmd_mii.o
+ ifdef CONFIG_PHYLIB
+ obj-$(CONFIG_CMD_MII) += cmd_mdio.o
+ endif
++obj-$(CONFIG_CMD_PFE_COMMANDS) += cmd_pfe_commands.o
++obj-$(CONFIG_CMD_PFE_COMMANDS) += cmd_gemac_stat.o
+ obj-$(CONFIG_CMD_MISC) += cmd_misc.o
+ obj-$(CONFIG_CMD_MMC) += cmd_mmc.o
+ obj-$(CONFIG_CMD_MMC_SPI) += cmd_mmc_spi.o
+diff --git a/common/cmd_gemac_stat.c b/common/cmd_gemac_stat.c
+new file mode 100644
+index 0000000..49bb1aa
+--- /dev/null
++++ b/common/cmd_gemac_stat.c
+@@ -0,0 +1,147 @@
++/*
++ * (C) Copyright 2003
++ *  Author : Laurent Brando (Mindspeed Technologies)
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/**
++ * @file
++ * @brief Retrieve GEMAC Statistics
++ */
++
++#include <common.h>
++#include <command.h>
++#include "../drivers/net/pfe_eth/pfe_eth.h"
++#include "../drivers/net/pfe_eth/pfe/pfe.h"
++#include "../drivers/net/pfe_eth/pfe_firmware.h"
++#include "../drivers/net/pfe_eth/pfe/cbus.h"
++#include "../drivers/net/pfe_eth/pfe/cbus/class_csr.h"
++#include "../drivers/net/pfe_eth/pfe/cbus/emac.h"
++
++#define ETH_GSTRING_LEN         32 /* from linux/include/ethtool.h */
++
++static const struct fec_stat {
++	char name[ETH_GSTRING_LEN];
++	u16 offset;
++} fec_stats[] = {
++	/* RMON TX */
++	{ "tx_dropped", RMON_T_DROP },
++	{ "tx_packets", RMON_T_PACKETS },
++	{ "tx_broadcast", RMON_T_BC_PKT },
++	{ "tx_multicast", RMON_T_MC_PKT },
++	{ "tx_crc_errors", RMON_T_CRC_ALIGN },
++	{ "tx_undersize", RMON_T_UNDERSIZE },
++	{ "tx_oversize", RMON_T_OVERSIZE },
++	{ "tx_fragment", RMON_T_FRAG },
++	{ "tx_jabber", RMON_T_JAB },
++	{ "tx_collision", RMON_T_COL },
++	{ "tx_64byte", RMON_T_P64 },
++	{ "tx_65to127byte", RMON_T_P65TO127 },
++	{ "tx_128to255byte", RMON_T_P128TO255 },
++	{ "tx_256to511byte", RMON_T_P256TO511 },
++	{ "tx_512to1023byte", RMON_T_P512TO1023 },
++	{ "tx_1024to2047byte", RMON_T_P1024TO2047 },
++	{ "tx_GTE2048byte", RMON_T_P_GTE2048 },
++	{ "tx_octets", RMON_T_OCTETS },
++
++	/* IEEE TX */
++	{ "IEEE_tx_drop", IEEE_T_DROP },
++	{ "IEEE_tx_frame_ok", IEEE_T_FRAME_OK },
++	{ "IEEE_tx_1col", IEEE_T_1COL },
++	{ "IEEE_tx_mcol", IEEE_T_MCOL },
++	{ "IEEE_tx_def", IEEE_T_DEF },
++	{ "IEEE_tx_lcol", IEEE_T_LCOL },
++	{ "IEEE_tx_excol", IEEE_T_EXCOL },
++	{ "IEEE_tx_macerr", IEEE_T_MACERR },
++	{ "IEEE_tx_cserr", IEEE_T_CSERR },
++	{ "IEEE_tx_sqe", IEEE_T_SQE },
++	{ "IEEE_tx_fdxfc", IEEE_T_FDXFC },
++	{ "IEEE_tx_octets_ok", IEEE_T_OCTETS_OK },
++
++	/* RMON RX */
++	{ "rx_packets", RMON_R_PACKETS },
++	{ "rx_broadcast", RMON_R_BC_PKT },
++	{ "rx_multicast", RMON_R_MC_PKT },
++	{ "rx_crc_errors", RMON_R_CRC_ALIGN },
++	{ "rx_undersize", RMON_R_UNDERSIZE },
++	{ "rx_oversize", RMON_R_OVERSIZE },
++	{ "rx_fragment", RMON_R_FRAG },
++	{ "rx_jabber", RMON_R_JAB },
++	{ "rx_64byte", RMON_R_P64 },
++	{ "rx_65to127byte", RMON_R_P65TO127 },
++	{ "rx_128to255byte", RMON_R_P128TO255 },
++	{ "rx_256to511byte", RMON_R_P256TO511 },
++	{ "rx_512to1023byte", RMON_R_P512TO1023 },
++	{ "rx_1024to2047byte", RMON_R_P1024TO2047 },
++	{ "rx_GTE2048byte", RMON_R_P_GTE2048 },
++	{ "rx_octets", RMON_R_OCTETS },
++
++	/* IEEE RX */
++	{ "IEEE_rx_drop", IEEE_R_DROP },
++	{ "IEEE_rx_frame_ok", IEEE_R_FRAME_OK },
++	{ "IEEE_rx_crc", IEEE_R_CRC },
++	{ "IEEE_rx_align", IEEE_R_ALIGN },
++	{ "IEEE_rx_macerr", IEEE_R_MACERR },
++	{ "IEEE_rx_fdxfc", IEEE_R_FDXFC },
++	{ "IEEE_rx_octets_ok", IEEE_R_OCTETS_OK },
++};
++
++static void ls1012a_emac_print_stats(void *base)
++{
++	int i;
++
++	for (i = 0; i < ARRAY_SIZE(fec_stats); i++)
++		printf("%s: %d\n", fec_stats[i].name, readl(base + fec_stats[i].offset));
++}
++
++static int gemac_stats(cmd_tbl_t *cmdtp, int flag, int argc,
++		       char * const argv[])
++{
++	void *gemac_base = NULL;
++
++	if (argc != 2) {
++		printf("Usage: \n" "gemac_stat [ethx]\n");
++		return CMD_RET_SUCCESS;
++	}
++
++	if ( strcmp(argv[1], "eth0") == 0)
++		gemac_base = (void *)EMAC1_BASE_ADDR;
++	else if ( strcmp(argv[1], "eth1") == 0)
++		gemac_base = (void *)EMAC2_BASE_ADDR;
++
++	if (gemac_base)
++	{
++		ls1012a_emac_print_stats(gemac_base);
++	}
++	else
++	{
++		printf("no such net device: %s\n", argv[1]);
++		return 1;
++	}
++
++	return 0;
++}
++
++U_BOOT_CMD(
++	gemac_stat,	2,	1,	gemac_stats,
++	"retrieve GEMAC statistics",
++	"Usage: \n"
++	"gemac_stat [ethx]\n"
++);
+diff --git a/common/cmd_pfe_commands.c b/common/cmd_pfe_commands.c
+new file mode 100644
+index 0000000..f9f92c7
+--- /dev/null
++++ b/common/cmd_pfe_commands.c
+@@ -0,0 +1,983 @@
++/*
++ * (C) Copyright 2012
++ *  Author : Bill Westland (Mindspeed Technologies)
++ *
++ * See file CREDITS for list of people who contributed to this
++ * project.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License as
++ * published by the Free Software Foundation; either version 2 of
++ * the License, or (at your option) any later version.
++ *
++ * This program is distributed in the hope that it will be useful,
++ * but WITHOUT ANY WARRANTY; without even the implied warranty of
++ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ * GNU General Public License for more details.
++ *
++ * You should have received a copy of the GNU General Public License
++ * along with this program; if not, write to the Free Software
++ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ * MA 02111-1307 USA
++ */
++
++/**
++ * @file
++ * @brief PFE utility commands
++ */
++
++#include <common.h>
++#include <command.h>
++#include "../drivers/net/pfe_eth/pfe_eth.h"
++#include "../drivers/net/pfe_eth/pfe/pfe.h"
++#include "../drivers/net/pfe_eth/pfe_firmware.h"
++#include "../drivers/net/pfe_eth/pfe/cbus/class_csr.h"
++#include "../drivers/net/pfe_eth/pfe/cbus/gpi.h"
++DECLARE_GLOBAL_DATA_PTR;
++
++int pfe_load_elf(int pe_mask, const struct firmware *fw);
++int ls1012a_gemac_initialize(bd_t * bis, int dev_id, char *devname);
++
++static void pfe_command_help(void)
++{
++	printf("Usage: pfe [start | firmware | load | lib | pe | gemac | gem | gpi | class | tmu | util | hif | status | expt | fftest] <options>\n");
++}
++
++static void pfe_command_firmware(int argc, char * const argv[])
++{
++	if (argc == 3 && strcmp(argv[2], "init") == 0)
++	{
++		pfe_firmware_init((u8 *)0x80100000, (u8 *)0x80180000, (u8 *)0x80200000);
++	}
++	else if (argc == 3 && strcmp(argv[2], "exit") == 0)
++	{
++		pfe_firmware_exit();
++	}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe firmware [init | exit]\n");
++	}
++}
++
++static void pfe_command_load(int argc, char * const argv[])
++{
++	if (argc >= 3 && strcmp(argv[2], "elf") == 0)
++	{
++		if (argc == 5)
++		{
++			u32 mask;
++			unsigned long image_start;
++			struct firmware fw;
++			mask = simple_strtoul(argv[3], NULL, 0);
++			image_start = simple_strtoul(argv[4], NULL, 16);
++			fw.data = (u8 *)image_start;
++			pfe_load_elf(mask, &fw);
++		}
++		else
++		{
++			printf("Usage: pfe load elf <pe_mask> <image_start>\n");
++		}
++	}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe load elf <parameters>\n");
++	}
++}
++#if 0
++static void pfe_command_lib(int argc, char *argv[])
++{
++	if (argc >= 3 && strcmp(argv[2], "init") == 0)
++	{
++		if (argc == 3)
++			pfe_lib_init((void *)COMCERTO_AXI_HFE_CFG_BASE, (void *)CONFIG_DDR_BASEADDR, CONFIG_DDR_PHYS_BASEADDR);
++		else if (argc == 6)
++		{
++			u32 cbus_base;
++			u32 ddr_base;
++			u32 ddr_phys_base;
++			cbus_base = simple_strtoul(argv[3], NULL, 16);
++			ddr_base = simple_strtoul(argv[4], NULL, 16);
++			ddr_phys_base = simple_strtoul(argv[5], NULL, 16);
++			pfe_lib_init((void *)cbus_base, (void *)ddr_base, ddr_phys_base);
++		}
++		else
++		{
++			printf("Usage: pfe lib init [<cbus_base> <ddr_base> <ddr_phys_base>]\n");
++		}
++	}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe lib init <parameters>\n");
++	}
++}
++#endif
++static void pfe_command_pe(int argc, char * const argv[])
++{
++	if (argc >= 3 && strcmp(argv[2], "pmem") == 0)
++	{
++		if (argc >= 4 && strcmp(argv[3], "read") == 0)
++		{
++			int i;
++			int num;
++			int id;
++			u32 addr;
++			u32 size;
++			u32 val;
++			if (argc == 7)
++				num = simple_strtoul(argv[6], NULL, 0);
++			else if (argc == 6)
++				num = 1;
++			else
++			{
++				printf("Usage: pfe pe pmem read <id> <addr> [<num>]\n");
++				return;
++			}
++			id = simple_strtoul(argv[4], NULL, 0);
++			addr = simple_strtoul(argv[5], NULL, 16);
++			size = 4;
++			for (i = 0; i < num; i++, addr += 4)
++			{
++				val = pe_pmem_read(id, addr, size);
++				val = be32_to_cpu(val);
++				if(!(i&3)) printf("%08x: ", addr);
++				printf("%08x%s", val, i == num - 1 || (i & 3) == 3 ? "\n" : " ");
++			}
++		}
++		else
++		{
++			printf("Usage: pfe pe pmem read <parameters>\n");
++		}
++	}
++	else if (argc >= 3 && strcmp(argv[2], "dmem") == 0)
++	{
++		if (argc >= 4 && strcmp(argv[3], "read") == 0)
++		{
++			int i;
++			int num;
++			int id;
++			u32 addr;
++			u32 size;
++			u32 val;
++			if (argc == 7)
++				num = simple_strtoul(argv[6], NULL, 0);
++			else if (argc == 6)
++				num = 1;
++			else
++			{
++				printf("Usage: pfe pe dmem read <id> <addr> [<num>]\n");
++				return;
++			}
++			id = simple_strtoul(argv[4], NULL, 0);
++			addr = simple_strtoul(argv[5], NULL, 16);
++			size = 4;
++			for (i = 0; i < num; i++, addr += 4)
++			{
++				val = pe_dmem_read(id, addr, size);
++				val = be32_to_cpu(val);
++				if(!(i&3)) printf("%08x: ", addr);
++				printf("%08x%s", val, i == num - 1 || (i & 3) == 3 ? "\n" : " ");
++			}
++		}
++		else if (argc >= 4 && strcmp(argv[3], "write") == 0)
++		{
++			int id;
++			u32 val;
++			u32 addr;
++			u32 size;
++			if (argc != 7)
++			{
++				printf("Usage: pfe pe dmem write <id> <val> <addr>\n");
++				return;
++			}
++			id = simple_strtoul(argv[4], NULL, 0);
++			val = simple_strtoul(argv[5], NULL, 16);
++			val = cpu_to_be32(val);
++			addr = simple_strtoul(argv[6], NULL, 16);
++			size = 4;
++			pe_dmem_write(id, val, addr, size);
++		}
++		else
++		{
++			printf("Usage: pfe pe dmem [read | write] <parameters>\n");
++		}
++	}
++	else if (argc >= 3 && strcmp(argv[2], "lmem") == 0)
++	{
++		if (argc >= 4 && strcmp(argv[3], "read") == 0)
++		{
++			int i;
++			int num;
++			u32 val;
++			u32 offset;
++			if (argc == 6)
++				num = simple_strtoul(argv[5], NULL, 0);
++			else if (argc == 5)
++				num = 1;
++			else
++			{
++				printf("Usage: pfe pe lmem read <offset> [<num>]\n");
++				return;
++			}
++			offset = simple_strtoul(argv[4], NULL, 16);
++			for (i = 0; i < num; i++, offset += 4)
++			{
++				pe_lmem_read(&val, 4, offset);
++				val = be32_to_cpu(val);
++				printf("%08x%s", val, i == num - 1 || (i & 7) == 7 ? "\n" : " ");
++			}
++		}
++		else if (argc >= 4 && strcmp(argv[3], "write") == 0)
++		{
++			u32 val;
++			u32 offset;
++			if (argc != 6)
++			{
++				printf("Usage: pfe pe lmem write <val> <offset>\n");
++				return;
++			}
++			val = simple_strtoul(argv[4], NULL, 16);
++			val = cpu_to_be32(val);
++			offset = simple_strtoul(argv[5], NULL, 16);
++			pe_lmem_write(&val, 4, offset);
++		}
++		else
++		{
++			printf("Usage: pfe pe lmem [read | write] <parameters>\n");
++		}
++	}
++	else
++	{
++		if (strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe pe <parameters>\n");
++	}
++	//void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned int len)
++	//void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
++	//void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
++	//int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr)
++}
++
++#if 0
++static void pfe_command_gemac(int argc, char *argv[])
++{
++void gemac_init(void *base, void *cfg)
++void gemac_set_speed(void *base, MAC_SPEED gem_speed)
++void gemac_set_duplex(void *base, int duplex)
++void gemac_set_mode(void *base, int mode)
++void gemac_reset(void *base)
++void gemac_enable(void *base)
++void gemac_disable(void *base)
++void gemac_set_address(void *base, SPEC_ADDR *addr)
++SPEC_ADDR gemac_get_address(void *base)
++void gemac_set_laddr1(void *base, MAC_ADDR *address)
++void gemac_set_laddr2(void *base, MAC_ADDR *address)
++void gemac_set_laddr3(void *base, MAC_ADDR *address)
++void gemac_set_laddr4(void *base, MAC_ADDR *address)
++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index)
++void gemac_allow_broadcast(void *base)
++void gemac_no_broadcast(void *base)
++void gemac_enable_unicast(void *base)
++void gemac_disable_unicast(void *base)
++void gemac_enable_multicast(void *base)
++void gemac_disable_multicast(void *base)
++void gemac_enable_fcs_rx(void *base)
++void gemac_disable_fcs_rx(void *base)
++void gemac_enable_1536_rx(void *base)
++void gemac_disable_1536_rx(void *base)
++void gemac_enable_pause_rx(void *base)
++void gemac_disable_pause_rx(void *base)
++void gemac_set_config(void *base, GEMAC_CFG *cfg)
++unsigned int * gemac_get_stats(void *base)
++}
++#endif
++
++#if 0
++static void pfe_command_gem(int argc, char *argv[])
++{
++MAC_ADDR gem_get_laddr1(void *base)
++MAC_ADDR gem_get_laddr2(void *base)
++MAC_ADDR gem_get_laddr3(void *base)
++MAC_ADDR gem_get_laddr4(void *base)
++MAC_ADDR gem_get_laddrN(void *base, unsigned int entry_index)
++}
++#endif
++
++#if 0
++static void pfe_command_gpi(int argc, char *argv[])
++{
++void gpi_init(void *base, GPI_CFG *cfg)
++void gpi_reset(void *base)
++void gpi_enable(void *base)
++void gpi_disable(void *base)
++void gpi_set_config(void *base, GPI_CFG *cfg)
++}
++#endif
++
++#if 1
++static void pfe_command_class(int argc, char * const argv[])
++{
++	if (argc >= 3 && strcmp(argv[2], "init") == 0)
++	{
++		CLASS_CFG cfg;
++		if (argc == 3)
++		{
++#define CONFIG_DDR_PHYS_BASEADDR	0x03800000
++			cfg.route_table_hash_bits = ROUTE_TABLE_HASH_BITS;
++			cfg.route_table_baseaddr = CONFIG_DDR_PHYS_BASEADDR + ROUTE_TABLE_BASEADDR;
++		}
++		else if (argc == 5)
++		{
++			cfg.route_table_hash_bits = simple_strtoul(argv[3], NULL, 16);
++			cfg.route_table_baseaddr = simple_strtoul(argv[4], NULL, 16);
++		}
++		else
++		{
++			printf("Usage: pfe class init <route_table_hash_bits> <route_table_baseaddr>\n");
++		}
++		class_init(&cfg);
++	}
++	else if (argc == 3 && strcmp(argv[2], "reset") == 0)
++	{
++		class_reset();
++	}
++	else if (argc == 3 && strcmp(argv[2], "enable") == 0)
++	{
++		class_enable();
++	}
++	else if (argc == 3 && strcmp(argv[2], "disable") == 0)
++	{
++		class_disable();
++	}
++	else if (argc >= 3 && strcmp(argv[2], "config") == 0)
++	{
++		CLASS_CFG cfg;
++		if (argc == 3)
++		{
++			cfg.route_table_hash_bits = ROUTE_TABLE_HASH_BITS;
++			cfg.route_table_baseaddr = CONFIG_DDR_PHYS_BASEADDR + ROUTE_TABLE_BASEADDR;
++		}
++		else if (argc == 5)
++		{
++			cfg.route_table_hash_bits = simple_strtoul(argv[3], NULL, 16);
++			cfg.route_table_baseaddr = simple_strtoul(argv[4], NULL, 16);
++		}
++		else
++		{
++			printf("Usage: pfe class config <route_table_hash_bits> <route_table_baseaddr>\n");
++		}
++		class_set_config(&cfg);
++	}
++	else if (argc >= 3 && strcmp(argv[2], "bus") == 0)
++	{
++		if (argc >= 4 && strcmp(argv[3], "read") == 0)
++		{
++			u32 addr;
++			u32 size;
++			u32 val;
++			if (argc != 6)
++			{
++				printf("Usage: pfe class bus read <addr> <size>\n");
++				return;
++			}
++			addr = simple_strtoul(argv[4], NULL, 16);
++			size = simple_strtoul(argv[5], NULL, 16);
++			val = class_bus_read(addr, size);
++			printf("%08x\n", val);
++		}
++		else if (argc >= 4 && strcmp(argv[3], "write") == 0)
++		{
++			u32 val;
++			u32 addr;
++			u32 size;
++			if (argc != 7)
++			{
++				printf("Usage: pfe class bus write <val> <addr> <size>\n");
++				return;
++			}
++			val = simple_strtoul(argv[4], NULL, 16);
++			addr = simple_strtoul(argv[5], NULL, 16);
++			size = simple_strtoul(argv[6], NULL, 16);
++			class_bus_write(val, addr, size);
++		}
++		else
++		{
++			printf("Usage: pfe class bus [read | write] <parameters>\n");
++		}
++	}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe class [init | reset | enable | disable | config | bus] <parameters>\n");
++	}
++}
++
++static void pfe_command_tmu(int argc, char * const argv[])
++{
++	if (argc >= 3 && strcmp(argv[2], "init") == 0)
++	{
++		if (argc == 5)
++		{
++			TMU_CFG cfg;
++			cfg.llm_base_addr = simple_strtoul(argv[3], NULL, 16);
++			cfg.llm_queue_len = simple_strtoul(argv[4], NULL, 16);
++			tmu_init(&cfg);
++		}
++		else
++		{
++			printf("Usage: pfe tmu init <llm_base_addr> <llm_queue_len>\n");
++		}
++	}
++	else if (argc >= 3 && strcmp(argv[2], "enable") == 0)
++	{
++		if (argc == 4)
++		{
++			u32 mask;
++			mask = simple_strtoul(argv[3], NULL, 16);
++			tmu_enable(mask);
++		}
++		else
++		{
++			printf("Usage: pfe tmu enable <pe_mask>\n");
++		}
++	}
++	else if (argc >= 3 && strcmp(argv[2], "disable") == 0)
++	{
++		if (argc == 4)
++		{
++			u32 mask;
++			mask = simple_strtoul(argv[3], NULL, 16);
++			tmu_disable(mask);
++		}
++		else
++		{
++			printf("Usage: pfe tmu disable <pe_mask>\n");
++		}
++	}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe tmu [init | enable | disable] <parameters>\n");
++	}
++}
++#endif
++
++/** qm_read_drop_stat
++ * This function is used to read the drop statistics from the TMU
++ * hw drop counter.  Since the hw counter is always cleared afer
++ * reading, this function maintains the previous drop count, and
++ * adds the new value to it.  That value can be retrieved by
++ * passing a pointer to it with the total_drops arg.
++ *
++ * @param tmu           TMU number (0 - 3)
++ * @param queue         queue number (0 - 15)
++ * @param total_drops   pointer to location to store total drops (or NULL)
++ * @param do_reset      if TRUE, clear total drops after updating
++ *
++ */
++
++u32 qm_read_drop_stat(u32 tmu, u32 queue, u32 *total_drops, int do_reset)
++{
++#define NUM_QUEUES		16
++	static u32 qtotal[TMU_MAX_ID + 1][NUM_QUEUES];
++	u32 val;
++	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
++	writel((tmu << 8) | queue, TMU_LLM_CTRL);
++	val = readl(TMU_TEQ_DROP_STAT);
++	qtotal[tmu][queue] += val;
++	if (total_drops)
++		*total_drops = qtotal[tmu][queue];
++	if (do_reset)
++		qtotal[tmu][queue] = 0;
++	return val;
++}
++
++static ssize_t tmu_queue_stats(char *buf, int tmu, int queue)
++{
++	ssize_t len = 0;
++	u32 drops;
++
++	printf("%d-%02d, ", tmu, queue);
++
++	drops = qm_read_drop_stat(tmu, queue, NULL, 0);
++
++	/* Select queue */
++	writel((tmu << 8) | queue, TMU_TEQ_CTRL);
++	writel((tmu << 8) | queue, TMU_LLM_CTRL);
++
++	printf("(teq) drop: %10u, tx: %10u (llm) head: %08x, tail: %08x, drop: %10u\n",
++			drops, readl(TMU_TEQ_TRANS_STAT),
++			readl(TMU_LLM_QUE_HEADPTR), readl(TMU_LLM_QUE_TAILPTR),
++			readl(TMU_LLM_QUE_DROPCNT));
++
++	return len;
++}
++
++
++static ssize_t tmu_queues(char *buf, int tmu)
++{
++	ssize_t len = 0;
++	int queue;
++
++	for (queue = 0; queue < 16; queue++)
++		len += tmu_queue_stats(buf + len, tmu, queue);
++
++	return len;
++}
++
++void hif_status(void)
++{
++	printf("hif:\n");
++
++	printf("  tx curr bd:    %x\n", readl(HIF_TX_CURR_BD_ADDR));
++	printf("  tx status:     %x\n", readl(HIF_TX_STATUS));
++	printf("  tx dma status: %x\n", readl(HIF_TX_DMA_STATUS));
++
++	printf("  rx curr bd:    %x\n", readl(HIF_RX_CURR_BD_ADDR));
++	printf("  rx status:     %x\n", readl(HIF_RX_STATUS));
++	printf("  rx dma status: %x\n", readl(HIF_RX_DMA_STATUS));
++
++	printf("hif nocopy:\n");
++
++	printf("  tx curr bd:    %x\n", readl(HIF_NOCPY_TX_CURR_BD_ADDR));
++	printf("  tx status:     %x\n", readl(HIF_NOCPY_TX_STATUS));
++	printf("  tx dma status: %x\n", readl(HIF_NOCPY_TX_DMA_STATUS));
++
++	printf("  rx curr bd:    %x\n", readl(HIF_NOCPY_RX_CURR_BD_ADDR));
++	printf("  rx status:     %x\n", readl(HIF_NOCPY_RX_STATUS));
++	printf("  rx dma status: %x\n", readl(HIF_NOCPY_RX_DMA_STATUS));
++}
++
++static void  gpi(int id, void *base)
++{
++        u32 val;
++
++        printf("gpi%d:\n  ", id);
++
++        printf("  tx under stick: %x\n", readl(base + GPI_FIFO_STATUS));
++        val = readl(base + GPI_FIFO_DEBUG);
++        printf("  tx pkts:        %x\n", (val >> 23) & 0x3f);
++        printf("  rx pkts:        %x\n", (val >> 18) & 0x3f);
++        printf("  tx bytes:       %x\n", (val >> 9) & 0x1ff);
++        printf("  rx bytes:       %x\n", (val >> 0) & 0x1ff);
++        printf("  overrun:        %x\n", readl(base + GPI_OVERRUN_DROPCNT));
++}
++
++void  bmu(int id, void *base)
++{
++	printf("bmu: %d\n", id);
++	printf("  buf size:  %x\n", (1 << readl(base + BMU_BUF_SIZE)));
++	printf("  buf count: %x\n", readl(base + BMU_BUF_CNT));
++	printf("  buf rem:   %x\n", readl(base + BMU_REM_BUF_CNT));
++	printf("  buf curr:  %x\n", readl(base + BMU_CURR_BUF_CNT));
++	printf("  free err:  %x\n", readl(base + BMU_FREE_ERR_ADDR));
++}
++
++#define	PESTATUS_ADDR_CLASS	0x800
++#define	PESTATUS_ADDR_TMU	0x80
++#define	PESTATUS_ADDR_UTIL	0x0
++
++static void pfe_pe_status(int argc, char * const argv[])
++{
++	int do_clear = 0;
++	int j;
++	u32 id;
++	u32 dmem_addr;
++	u32 cpu_state;
++	u32 activity_counter;
++	u32 rx;
++	u32 tx;
++	u32 drop;
++	char statebuf[5];
++	u32 class_debug_reg = 0;
++	u32 debug_indicator;
++	u32 debug[16];
++
++	if (argc == 4 && strcmp(argv[3], "clear") == 0)
++		do_clear = 1;
++
++	for (id = CLASS0_ID; id < MAX_PE; id++)
++	{
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++		if (id == UTIL_ID)
++		{
++			printf("util:\n");
++			dmem_addr = PESTATUS_ADDR_UTIL;
++		}
++		else if (id >= TMU0_ID)
++#else
++		if (id >= TMU0_ID)
++#endif
++		{
++			if (id == TMU2_ID)
++				continue;
++			if (id == TMU0_ID)
++				printf("tmu:\n");
++			dmem_addr = PESTATUS_ADDR_TMU;
++		}
++		else
++		{
++			if (id == CLASS0_ID)
++				printf("class:\n");
++			dmem_addr = PESTATUS_ADDR_CLASS;
++			class_debug_reg = readl(CLASS_PE0_DEBUG + id * 4);
++		}
++		cpu_state = pe_dmem_read(id, dmem_addr, 4);
++		dmem_addr += 4;
++		memcpy(statebuf, (char *)&cpu_state, 4);
++		statebuf[4] = '\0';
++		activity_counter = pe_dmem_read(id, dmem_addr, 4);
++		dmem_addr += 4;
++		rx = pe_dmem_read(id, dmem_addr, 4);
++		if (do_clear)
++			pe_dmem_write(id, 0, dmem_addr, 4);
++		dmem_addr += 4;
++		tx = pe_dmem_read(id, dmem_addr, 4);
++		if (do_clear)
++			pe_dmem_write(id, 0, dmem_addr, 4);
++		dmem_addr += 4;
++		drop = pe_dmem_read(id, dmem_addr, 4);
++		if (do_clear)
++			pe_dmem_write(id, 0, dmem_addr, 4);
++		dmem_addr += 4;
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++		if (id == UTIL_ID)
++		{
++			printf("state=%4s ctr=%08x rx=%x tx=%x\n",
++					statebuf, cpu_to_be32(activity_counter),
++					cpu_to_be32(rx), cpu_to_be32(tx));
++		}
++		else
++#endif
++		if (id >= TMU0_ID)
++		{
++			printf("%d: state=%4s ctr=%08x rx=%x qstatus=%x\n",
++					id - TMU0_ID, statebuf, cpu_to_be32(activity_counter),
++					cpu_to_be32(rx), cpu_to_be32(tx));
++		}
++		else
++		{
++			printf("%d: pc=1%04x ldst=%04x state=%4s ctr=%08x rx=%x tx=%x drop=%x\n",
++					id - CLASS0_ID, class_debug_reg & 0xFFFF, class_debug_reg >> 16,
++					statebuf, cpu_to_be32(activity_counter),
++					cpu_to_be32(rx), cpu_to_be32(tx), cpu_to_be32(drop));
++		}
++		debug_indicator = pe_dmem_read(id, dmem_addr, 4);
++		dmem_addr += 4;
++		if (debug_indicator == cpu_to_be32('DBUG'))
++		{
++			int last = 0;
++			for (j = 0; j < 16; j++)
++			{
++				debug[j] = pe_dmem_read(id, dmem_addr, 4);
++				if (debug[j])
++				{
++					last = j + 1;
++					if (do_clear)
++						pe_dmem_write(id, 0, dmem_addr, 4);
++				}
++				dmem_addr += 4;
++			}
++			for (j = 0; j < last; j++)
++			{
++				printf("%08x%s", cpu_to_be32(debug[j]), (j & 0x7) == 0x7 || j == last - 1 ? "\n" : " ");
++			}
++		}
++	}
++
++}
++
++static void pfe_command_status(int argc, char * const argv[])
++{
++
++	if (argc >= 3 && strcmp(argv[2], "pe") == 0)
++	{
++		pfe_pe_status(argc, argv);
++	}
++	else if (argc == 3 && strcmp(argv[2], "bmu") == 0)
++	{
++		bmu(1, BMU1_BASE_ADDR);
++		bmu(2, BMU2_BASE_ADDR);
++	}
++	else if (argc == 3 && strcmp(argv[2], "hif") == 0)
++	{
++		hif_status();
++	}
++	else if (argc == 3 && strcmp(argv[2], "gpi") == 0)
++	{
++		gpi(0, EGPI1_BASE_ADDR);
++		gpi(1, EGPI2_BASE_ADDR);
++		gpi(3, HGPI_BASE_ADDR);
++	}
++	else if (argc == 3 && strcmp(argv[2], "tmu0_queues") == 0)
++	{
++		tmu_queues(NULL, 0);
++	}
++	else if (argc == 3 && strcmp(argv[2], "tmu1_queues") == 0)
++	{
++		tmu_queues(NULL, 1);
++	}
++	else if (argc == 3 && strcmp(argv[2], "tmu3_queues") == 0)
++	{
++		tmu_queues(NULL, 3);
++	}
++	else
++		printf("Usage: pfe status [pe <clear> | bmu | gpi | hif | tmuX_queues ]\n");
++
++	return;
++}
++
++
++#define EXPT_DUMP_ADDR 0x1fa8
++#define EXPT_REG_COUNT 20
++static const char *register_names[EXPT_REG_COUNT] = {
++		"  pc", "ECAS", " EID", "  ED",
++		"  sp", "  r1", "  r2", "  r3",
++		"  r4", "  r5", "  r6", "  r7",
++		"  r8", "  r9", " r10", " r11",
++		" r12", " r13", " r14", " r15"
++};
++
++static void pfe_command_expt(int argc, char * const argv[])
++{
++	unsigned int id, i, val, addr;
++
++	if (argc == 3)
++	{
++		id = simple_strtoul(argv[2], NULL, 0);
++		addr = EXPT_DUMP_ADDR;
++		printf("Exception information for PE %d:\n", id);
++		for (i = 0; i < EXPT_REG_COUNT; i++)
++		{
++			val = pe_dmem_read(id, addr, 4);
++			val = be32_to_cpu(val);
++			printf("%s:%08x%s", register_names[i], val, (i & 3) == 3 ? "\n" : " ");
++			addr += 4;
++		}
++	}
++	else
++	{
++		printf("Usage: pfe expt <id>\n");
++	}
++}
++
++static void pfe_command_util(int argc, char * const argv[])
++{
++	if (argc == 3 && strcmp(argv[2], "init") == 0)
++	{
++		UTIL_CFG cfg;
++		util_init(&cfg);
++	}
++	else if (argc == 3 && strcmp(argv[2], "reset") == 0)
++	{
++		util_reset();
++	}
++	else if (argc == 3 && strcmp(argv[2], "enable") == 0)
++	{
++		util_enable();
++	}
++	else if (argc == 3 && strcmp(argv[2], "disable") == 0)
++	{
++		util_disable();
++	}
++	else if (argc >= 3 && strcmp(argv[2], "bus") == 0)
++		{
++			if (argc >= 4 && strcmp(argv[3], "read") == 0)
++			{
++				u32 addr;
++				u32 size;
++				u32 val;
++				if (argc != 6)
++				{
++					printf("Usage: pfe util bus read <addr> <size>\n");
++					return;
++				}
++				addr = simple_strtoul(argv[4], NULL, 16);
++				size = simple_strtoul(argv[5], NULL, 16);
++				val = util_bus_read(addr, size);
++				printf("%08x\n", val);
++			}
++			else if (argc >= 4 && strcmp(argv[3], "write") == 0)
++			{
++				u32 val;
++				u32 addr;
++				u32 size;
++				if (argc != 7)
++				{
++					printf("Usage: pfe util bus write <val> <addr> <size>\n");
++					return;
++				}
++				val = simple_strtoul(argv[4], NULL, 16);
++				addr = simple_strtoul(argv[5], NULL, 16);
++				size = simple_strtoul(argv[6], NULL, 16);
++				util_bus_write(val, addr, size);
++			}
++			else
++			{
++				printf("Usage: pfe util bus [read | write] <parameters>\n");
++			}
++		}
++	else
++	{
++		if (argc >= 3 && strcmp(argv[2], "help") != 0)
++		{
++			printf("Unknown option: %s\n", argv[2]);
++		}
++		printf("Usage: pfe util [init | reset | enable | disable | bus] <parameters>\n");
++	}
++}
++
++#if 0
++static void pfe_command_hif(int argc, char *argv[])
++{
++void hif_nocpy_init(void)
++void hif_init(void)
++void hif_tx_enable(void)
++void hif_tx_disable(void)
++void hif_rx_enable(void)
++void hif_rx_disable(void)
++}
++#endif
++
++#define ROUTE_TABLE_START	(CONFIG_DDR_PHYS_BASEADDR+ROUTE_TABLE_BASEADDR)
++static void pfe_command_fftest(int argc, char * const argv[])
++{
++	bd_t *bd = gd->bd;
++	struct eth_device *edev_eth0;
++	struct eth_device *edev_eth1;
++
++
++	// open eth0 and eth1 
++	edev_eth0 = eth_get_dev_by_name("pfe_eth0");
++	if (!edev_eth0)
++	{
++		printf("Cannot access eth0\n");
++		return;
++	}
++
++	if (eth_write_hwaddr(edev_eth0, "eth", edev_eth0->index))
++		puts("\nWarning: failed to set MAC address for c2000_gemac0\n");
++
++	if (edev_eth0->state != ETH_STATE_ACTIVE)
++	{
++		if (edev_eth0->init(edev_eth0, bd) < 0) {
++			printf("eth0 init failed\n");
++			return;
++		}
++		edev_eth0->state = ETH_STATE_ACTIVE;
++	}
++
++	edev_eth1 = eth_get_dev_by_name("pfe_eth1");
++	if (!edev_eth1)
++	{
++		printf("Cannot access eth1\n");
++		return;
++	}
++
++	if (eth_write_hwaddr(edev_eth1, "eth", edev_eth1->index))
++		puts("\nWarning: failed to set MAC address for c2000_gemac1\n");
++
++	if (edev_eth1->state != ETH_STATE_ACTIVE)
++	{
++		if (edev_eth1->init(edev_eth1, bd) < 0) {
++			printf("eth1 init failed\n");
++			return;
++		}
++		edev_eth1->state = ETH_STATE_ACTIVE;
++	}
++
++}
++
++#ifdef CONFIG_CMD_PFE_START
++static void pfe_command_start(int argc, char * const argv[])
++{
++	printf("Starting PFE \n");
++	ls1012a_gemac_initialize(gd->bd, 0 , "pfe_eth0");
++	ls1012a_gemac_initialize(gd->bd, 1 , "pfe_eth1");
++}
++#endif
++
++
++static int pfe_command(cmd_tbl_t *cmdtp, int flag, int argc,
++		       char * const argv[])
++{
++	if (argc == 1 || strcmp(argv[1], "help") == 0)
++	{
++		pfe_command_help();
++		return CMD_RET_SUCCESS;
++	}
++	if (strcmp(argv[1], "firmware") == 0)
++		pfe_command_firmware(argc, argv);
++	else if (strcmp(argv[1], "load") == 0)
++		pfe_command_load(argc, argv);
++#if 0
++	else if (strcmp(argv[1], "lib") == 0)
++		pfe_command_lib(argc, argv);
++#endif
++	else if (strcmp(argv[1], "pe") == 0)
++		pfe_command_pe(argc, argv);
++#if 0
++	else if (strcmp(argv[1], "gemac") == 0)
++		pfe_command_gemac(argc, argv);
++	else if (strcmp(argv[1], "gem") == 0)
++		pfe_command_gem(argc, argv);
++	else if (strcmp(argv[1], "gpi") == 0)
++		pfe_command_gpi(argc, argv);
++#endif
++#if 1
++	else if (strcmp(argv[1], "class") == 0)
++		pfe_command_class(argc, argv);
++	else if (strcmp(argv[1], "tmu") == 0)
++		pfe_command_tmu(argc, argv);
++#endif
++	else if (strcmp(argv[1], "status") == 0)
++		pfe_command_status(argc, argv);
++	else if (strcmp(argv[1], "expt") == 0)
++		pfe_command_expt(argc, argv);
++	else if (strcmp(argv[1], "util") == 0)
++		pfe_command_util(argc, argv);
++#if 0
++	else if (strcmp(argv[1], "hif") == 0)
++		pfe_command_hif(argc, argv);
++#endif
++	else if (strcmp(argv[1], "fftest") == 0)
++		pfe_command_fftest(argc, argv);
++#ifdef CONFIG_CMD_PFE_START
++	else if (strcmp(argv[1], "start") == 0)
++		pfe_command_start(argc, argv);
++#endif
++	else
++	{
++		printf("Unknown option: %s\n", argv[1]);
++		pfe_command_help();
++		return CMD_RET_FAILURE;
++	}
++	return CMD_RET_SUCCESS;
++}
++
++
++U_BOOT_CMD(
++	pfe,	7,	1,	pfe_command,
++	"Performs PFE lib utility functions",
++	"Usage: \n"
++	"pfe <options>"
++);
+diff --git a/drivers/net/Makefile b/drivers/net/Makefile
+index 150470c..c683b8f 100644
+--- a/drivers/net/Makefile
++++ b/drivers/net/Makefile
+@@ -72,3 +72,4 @@ obj-$(CONFIG_FSL_MC_ENET) += fsl-mc/
+ obj-$(CONFIG_FSL_MC_ENET) += ldpaa_eth/
+ obj-$(CONFIG_FSL_MEMAC) += fm/memac_phy.o
+ obj-$(CONFIG_VSC9953) += vsc9953.o
++obj-$(CONFIG_FSL_PPFE) += pfe_eth/
+diff --git a/drivers/net/pfe_eth/Makefile b/drivers/net/pfe_eth/Makefile
+new file mode 100644
+index 0000000..1af837d
+--- /dev/null
++++ b/drivers/net/pfe_eth/Makefile
+@@ -0,0 +1 @@
++obj-y += pfe_eth.o pfe_firmware.o pfe.o pfe_driver.o
+diff --git a/drivers/net/pfe_eth/class_sbl_elf.fw b/drivers/net/pfe_eth/class_sbl_elf.fw
+new file mode 100644
+index 0000000..3745d9a
+--- /dev/null
++++ b/drivers/net/pfe_eth/class_sbl_elf.fw
+@@ -0,0 +1 @@
++0x7f,0x45,0x4c,0x46,0x01,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x6f,0x00,0x00,0x00,0x01,0x00,0x01,0x02,0x4c,0x00,0x00,0x00,0x34,0x00,0x00,0x13,0x14,0x00,0x04,0x00,0x05,0x00,0x34,0x00,0x20,0x00,0x04,0x00,0x28,0x00,0x0d,0x00,0x0c,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x90,0x00,0x00,0x08,0x98,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x08,0x98,0x00,0x00,0x08,0x98,0x00,0x00,0x08,0x98,0x00,0x00,0x01,0x80,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x0f,0x80,0x00,0x00,0x1f,0x80,0x00,0x00,0x1f,0x80,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x04,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x10,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x02,0x8c,0x00,0x00,0x02,0x8c,0x00,0x00,0x00,0x05,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2a,0x2a,0x2a,0x2a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x40,0x00,0x00,0x08,0x00,0x00,0x00,0x08,0x60,0x00,0x00,0x08,0x50,0x00,0x00,0x08,0x90,0x00,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x01,0x80,0x00,0x00,0x02,0x80,0x00,0x00,0x03,0x80,0x44,0x45,0x41,0x44,0xc0,0x25,0x00,0x34,0xc1,0x02,0x00,0x10,0xc1,0x02,0x00,0x08,0xc1,0x02,0x00,0x0c,0x73,0x74,0x6f,0x70,0x69,0x6e,0x69,0x74,0x72,0x75,0x6e,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x02,0x4c,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x01,0x01,0xe4,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xa7,0x08,0xe0,0x00,0x1f,0x95,0xbf,0x0f,0x00,0x00,0xe0,0x00,0x1f,0x83,0xe0,0x29,0xa7,0x7f,0xe0,0x00,0x1f,0x96,0xbf,0x0f,0x00,0x00,0xe0,0x00,0x1f,0x04,0xa7,0xce,0xc7,0x81,0xbf,0xce,0x38,0x82,0xc4,0xfc,0x3f,0xe8,0x00,0x85,0xe0,0x80,0xa7,0x19,0xe1,0x80,0xbf,0x1f,0xe0,0x0e,0x3f,0xa8,0x3f,0x7a,0x04,0xf9,0x38,0x82,0xc0,0x58,0x78,0x86,0x79,0x05,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0xe0,0x00,0x19,0x87,0xe0,0x00,0x19,0x17,0xe0,0x00,0x1a,0x98,0x13,0x00,0xeb,0x82,0xca,0x02,0xa7,0x03,0xe0,0x00,0x1f,0x84,0x27,0x0a,0xe0,0x00,0x1f,0x07,0x16,0x81,0xbe,0x9e,0xe0,0x00,0x1f,0x19,0xbf,0x0f,0x00,0x00,0x00,0xff,0xa7,0x1f,0xc7,0x01,0xbf,0x1f,0xe0,0x00,0x1f,0x03,0xa6,0x84,0xe0,0x26,0xa7,0x7e,0xe0,0x0e,0x3e,0xde,0x27,0x69,0xa7,0x2f,0xc7,0x01,0xbf,0x2f,0xe0,0x00,0x1f,0x85,0xe0,0x26,0xa4,0x7f,0x9f,0x38,0xe2,0x00,0xcf,0x03,0x01,0x85,0x9f,0xa8,0xe2,0x00,0xcf,0xb7,0x05,0x85,0xa7,0xa8,0xeb,0xe0,0xc7,0x80,0x27,0x85,0x3c,0xe6,0xdf,0xa5,0xe0,0x00,0x00,0xf5,0xe2,0x00,0xcf,0x03,0x01,0x04,0x97,0xa8,0xc7,0xfc,0xb7,0xa8,0x9e,0x28,0x3d,0x68,0xe0,0x00,0x17,0xf0,0xe2,0x00,0xce,0x6f,0xc5,0x10,0xe0,0x6f,0x3d,0xac,0xe0,0x0a,0x3f,0x9a,0xa5,0x88,0xe2,0x00,0xcf,0x03,0x01,0x8f,0xe0,0x02,0x8e,0x88,0x17,0x80,0xe2,0x00,0xce,0x83,0xe0,0x6f,0x3c,0xad,0x3e,0xef,0xc6,0x7a,0x3f,0xe8,0xc7,0x96,0xe3,0xff,0xc6,0x7f,0x00,0x90,0x3f,0xe8,0xc7,0x8a,0xe0,0x01,0xaf,0x28,0x17,0x00,0xaf,0x1f,0x17,0x00,0xaf,0x2f,0xc6,0x06,0xaf,0x3f,0xe3,0xff,0xc6,0x7f,0xaf,0x4f,0x16,0x83,0xaf,0x5f,0xe0,0x00,0x1f,0x06,0x14,0x81,0xe0,0x26,0xa7,0x7e,0xac,0x8e,0x3c,0xef,0xe3,0xff,0xc4,0xf8,0xc4,0xf8,0xe3,0xff,0xc4,0xf8,0x3c,0x69,0x3d,0x29,0xe2,0x01,0xc4,0x78,0xe2,0x01,0xc5,0x7f,0x3c,0x1b,0xb4,0x9e,0xe2,0x01,0xcd,0x00,0xad,0x1e,0xbc,0x1e,0x05,0x93,0xe0,0x01,0xc4,0x00,0xe0,0x01,0xc4,0x80,0xe1,0xff,0xc5,0x00,0x7e,0x08,0x7e,0x89,0x7f,0x07,0x7f,0x8a,0xdf,0x60,0x67,0x07,0xe7,0xff,0x15,0x80,0xad,0x9e,0x67,0x8a,0x66,0x89,0x66,0x08,0x9f,0x1e,0x3d,0xee,0xe2,0x01,0xc5,0xff,0x3f,0xab,0xaf,0x8e,0x17,0x80,0xaf,0xde,0xad,0x9e,0xae,0xce,0xe0,0x00,0x1f,0x83,0xb6,0x1e,0xe0,0x26,0xa7,0xff,0xbf,0x85,0x00,0x00,0xe0,0x00,0x1f,0x04,0xa7,0xbe,0xc7,0x81,0xbf,0xbe,0xe0,0x00,0x1f,0x83,0xe0,0x26,0xa7,0xff,0xbf,0x82,0x00,0x00,0xc3,0x01,0xe2,0x00,0xc3,0x03,0xe7,0xfe,0x00,0xd5,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe0,0x00,0x1f,0x84,0xe0,0x00,0x1f,0x1a,0xbf,0x0f,0xe0,0x00,0x1f,0x1b,0xbf,0x0f,0xdf,0x38,0xe0,0x00,0x1f,0x84,0xe0,0x00,0x1f,0x14,0xbf,0x0f,0xbc,0x1f,0xbf,0x0f,0x3a,0x80,0x00,0xff,0x00,0x00,0xea,0x00,0xcb,0x80,0xe0,0x3f,0xcb,0xa8,0xb8,0x47,0xb8,0xd7,0xb9,0x67,0xb9,0xf7,0xe0,0x01,0xba,0x07,0xe0,0x01,0xba,0x97,0xe0,0x01,0xbb,0x27,0xe0,0x01,0xbb,0xb7,0xe0,0x01,0xbc,0x47,0xe0,0x01,0xbc,0xd7,0xe0,0x01,0xbd,0x67,0xe0,0x01,0xbd,0xf7,0xe0,0x02,0xbe,0x07,0xe0,0x02,0xbe,0x97,0xe0,0x02,0xbf,0x27,0xe0,0x02,0xbf,0xb7,0xe0,0x60,0x3e,0x09,0xe0,0x60,0x3e,0x8a,0xe0,0x60,0x3f,0x0b,0xe0,0x60,0x3f,0x8c,0xbe,0x07,0xbe,0x97,0xbf,0x27,0xbf,0xb7,0xea,0x00,0xcb,0x80,0xe0,0x10,0xcb,0xa0,0x3c,0x6c,0xe7,0xff,0x00,0xc5,0x00,0x00,0x10,0x00,0x10,0x80,0x11,0x00,0x11,0x80,0x12,0x00,0x12,0x80,0x13,0x00,0x13,0x80,0x14,0x00,0x14,0x80,0x15,0x00,0x15,0x80,0x16,0x00,0x16,0x80,0x17,0x00,0x17,0x80,0xea,0x00,0xc8,0x00,0xe0,0x14,0xc8,0x14,0xea,0x00,0xcb,0x80,0xe0,0x10,0xcb,0xa0,0xe0,0x60,0x3c,0x00,0xcc,0x02,0xe0,0x60,0x3c,0x10,0xef,0xff,0xdf,0x9a,0x3a,0x80,0x47,0x43,0x43,0x3a,0x20,0x28,0x47,0x4e,0x55,0x29,0x20,0x34,0x2e,0x37,0x2e,0x31,0x00,0x00,0x2e,0x73,0x68,0x73,0x74,0x72,0x74,0x61,0x62,0x00,0x2e,0x70,0x6d,0x65,0x6d,0x00,0x2e,0x65,0x78,0x69,0x74,0x00,0x2e,0x69,0x6e,0x69,0x74,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x70,0x65,0x73,0x74,0x61,0x74,0x75,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x67,0x6f,0x74,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x73,0x64,0x61,0x74,0x61,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x6c,0x69,0x74,0x34,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x62,0x73,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x73,0x74,0x61,0x63,0x6b,0x00,0x2e,0x76,0x65,0x63,0x74,0x6f,0x72,0x00,0x2e,0x63,0x6f,0x6d,0x6d,0x65,0x6e,0x74,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0b,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x06,0x00,0x01,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x01,0xd0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x06,0x00,0x01,0x01,0xd0,0x00,0x00,0x11,0xd0,0x00,0x00,0x00,0x7a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x17,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x06,0x00,0x01,0x02,0x4c,0x00,0x00,0x12,0x4c,0x00,0x00,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x1d,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x08,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x08,0x20,0x00,0x00,0x08,0x20,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x36,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x08,0x40,0x00,0x00,0x08,0x40,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x42,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x12,0x00,0x00,0x08,0x70,0x00,0x00,0x08,0x70,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x4d,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x03,0x00,0x00,0x08,0x90,0x00,0x00,0x08,0x90,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x57,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x08,0x98,0x00,0x00,0x08,0x98,0x00,0x00,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x02,0x00,0x00,0x1f,0x80,0x00,0x00,0x0f,0x80,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6b,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0x8c,0x00,0x00,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x12,0x9d,0x00,0x00,0x00,0x74,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
+\ No newline at end of file
+diff --git a/drivers/net/pfe_eth/hal.h b/drivers/net/pfe_eth/hal.h
+new file mode 100644
+index 0000000..e795fe6
+--- /dev/null
++++ b/drivers/net/pfe_eth/hal.h
+@@ -0,0 +1,64 @@
++/*
++ *  (C) Copyright 2011
++ *  Author : Mindspeed Technologes
++ *  
++ *  See file CREDITS for list of people who contributed to this
++ *  project.
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License as
++ *  published by the Free Software Foundation; either version 2 of
++ *  the License, or (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ *  MA 02111-1307 USA
++ * */
++
++#ifndef _HAL_H_
++#define _HAL_H_
++
++#if defined(CONFIG_PLATFORM_PCI)  
++/* For ChipIT */
++
++#include <linux/types.h>
++#include <linux/elf.h>
++#include <linux/errno.h>
++#include <linux/pci.h>
++#include <asm/io.h>
++#include <linux/slab.h>
++#include <linux/firmware.h>
++
++
++#define free(x)  kfree(x)
++#define xzalloc(x)  kmalloc(x, GFP_DMA)
++#define printf  printk
++
++//#define dprint(fmt, arg...)	printk(fmt, ##arg)
++#define dprint(fmt, arg...)	
++
++#else
++
++#include <linux/types.h>
++#include <elf.h>
++#include <common.h>
++//#include <errno.h>
++#include <asm/byteorder.h>
++#include <miiphy.h>
++#include <malloc.h>
++#include <asm/io.h>
++
++
++#include "pfe_eth.h"
++
++#endif
++
++
++#endif /* _HAL_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe.c b/drivers/net/pfe_eth/pfe.c
+new file mode 100644
+index 0000000..3b5570a
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe.c
+@@ -0,0 +1,1677 @@
++#include "hal.h"
++#include "pfe/pfe.h"
++
++void *cbus_base_addr;
++void *ddr_base_addr;
++unsigned long ddr_phys_base_addr;
++#if 0
++#define dprintf(fmt, arg...) printf(fmt, ##arg)
++#else
++#define dprintf(fmt, arg...)
++#endif
++static struct pe_info pe[MAX_PE];
++
++/** Initializes the PFE library.
++* Must be called before using any of the library functions.
++*
++* @param[in] cbus_base		CBUS virtual base address (as mapped in the host CPU address space)
++* @param[in] ddr_base		DDR virtual base address (as mapped in the host CPU address space)
++* @param[in] ddr_phys_base	DDR physical base address (as mapped in platform)
++*/
++void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base)
++{
++	cbus_base_addr = cbus_base;
++	ddr_base_addr = ddr_base;
++	ddr_phys_base_addr = ddr_phys_base;
++
++	pe[CLASS0_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(0);
++	pe[CLASS0_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(0);
++	pe[CLASS0_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS0_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS0_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS0_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++
++	pe[CLASS1_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(1);
++	pe[CLASS1_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(1);
++	pe[CLASS1_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS1_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS1_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS1_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++
++	pe[CLASS2_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(2);
++	pe[CLASS2_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(2);
++	pe[CLASS2_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS2_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS2_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS2_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++
++	pe[CLASS3_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(3);
++	pe[CLASS3_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(3);
++	pe[CLASS3_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS3_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS3_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS3_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++
++#if !defined(CONFIG_PLATFORM_PCI)
++	pe[CLASS4_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(4);
++	pe[CLASS4_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(4);
++	pe[CLASS4_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS4_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS4_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS4_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++
++	pe[CLASS5_ID].dmem_base_addr = (u32)CLASS_DMEM_BASE_ADDR(5);
++	pe[CLASS5_ID].pmem_base_addr = (u32)CLASS_IMEM_BASE_ADDR(5);
++	pe[CLASS5_ID].pmem_size = (u32)CLASS_IMEM_SIZE;
++	pe[CLASS5_ID].mem_access_wdata = (void *)CLASS_MEM_ACCESS_WDATA;
++	pe[CLASS5_ID].mem_access_addr = (void *)CLASS_MEM_ACCESS_ADDR;
++	pe[CLASS5_ID].mem_access_rdata = (void *)CLASS_MEM_ACCESS_RDATA;
++#endif
++	pe[TMU0_ID].dmem_base_addr = (u32)TMU_DMEM_BASE_ADDR(0);
++	pe[TMU0_ID].pmem_base_addr = (u32)TMU_IMEM_BASE_ADDR(0);
++	pe[TMU0_ID].pmem_size = (u32)TMU_IMEM_SIZE;
++	pe[TMU0_ID].mem_access_wdata = (void *)TMU_MEM_ACCESS_WDATA;
++	pe[TMU0_ID].mem_access_addr = (void *)TMU_MEM_ACCESS_ADDR;
++	pe[TMU0_ID].mem_access_rdata = (void *)TMU_MEM_ACCESS_RDATA;
++
++#if !defined(CONFIG_TMU_DUMMY)
++	pe[TMU1_ID].dmem_base_addr = (u32)TMU_DMEM_BASE_ADDR(1);
++	pe[TMU1_ID].pmem_base_addr = (u32)TMU_IMEM_BASE_ADDR(1);
++	pe[TMU1_ID].pmem_size = (u32)TMU_IMEM_SIZE;
++	pe[TMU1_ID].mem_access_wdata = (void *)TMU_MEM_ACCESS_WDATA;
++	pe[TMU1_ID].mem_access_addr = (void *)TMU_MEM_ACCESS_ADDR;
++	pe[TMU1_ID].mem_access_rdata = (void *)TMU_MEM_ACCESS_RDATA;
++
++#if !defined(CONFIG_LS1012A)
++	pe[TMU2_ID].dmem_base_addr = (u32)TMU_DMEM_BASE_ADDR(2);
++	pe[TMU2_ID].pmem_base_addr = (u32)TMU_IMEM_BASE_ADDR(2);
++	pe[TMU2_ID].pmem_size = (u32)TMU_IMEM_SIZE;
++	pe[TMU2_ID].mem_access_wdata = (void *)TMU_MEM_ACCESS_WDATA;
++	pe[TMU2_ID].mem_access_addr = (void *)TMU_MEM_ACCESS_ADDR;
++	pe[TMU2_ID].mem_access_rdata = (void *)TMU_MEM_ACCESS_RDATA;
++#endif
++
++	pe[TMU3_ID].dmem_base_addr = (u32)TMU_DMEM_BASE_ADDR(3);
++	pe[TMU3_ID].pmem_base_addr = (u32)TMU_IMEM_BASE_ADDR(3);
++	pe[TMU3_ID].pmem_size = (u32)TMU_IMEM_SIZE;
++	pe[TMU3_ID].mem_access_wdata = (void *)TMU_MEM_ACCESS_WDATA;
++	pe[TMU3_ID].mem_access_addr = (void *)TMU_MEM_ACCESS_ADDR;
++	pe[TMU3_ID].mem_access_rdata = (void *)TMU_MEM_ACCESS_RDATA;
++#endif
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	pe[UTIL_ID].dmem_base_addr = (u32)UTIL_DMEM_BASE_ADDR;
++	pe[UTIL_ID].mem_access_wdata = (void *)UTIL_MEM_ACCESS_WDATA;
++	pe[UTIL_ID].mem_access_addr = (void *)UTIL_MEM_ACCESS_ADDR;
++	pe[UTIL_ID].mem_access_rdata = (void *)UTIL_MEM_ACCESS_RDATA;
++#endif
++}
++
++
++/** Writes a buffer to PE internal memory from the host
++ * through indirect access registers.
++ *
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] src		Buffer source address
++ * @param[in] mem_access_addr	DMEM destination address (must be 32bit aligned)
++ * @param[in] len		Number of bytes to copy
++ */
++void pe_mem_memcpy_to32(int id, u32 mem_access_addr, const void *src, unsigned int len)
++{
++	u32 offset = 0, val, addr;
++	unsigned int len32 = len >> 2;
++	int i;
++
++	addr = mem_access_addr | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_BYTE_ENABLE(0, 4);
++
++	for (i = 0; i < len32; i++, offset += 4, src += 4) {
++		val = *(u32 *)src;
++		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
++		writel(addr + offset, pe[id].mem_access_addr);
++	}
++
++	if ((len = (len & 0x3))) {
++		val = 0;
++
++		addr = (mem_access_addr | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_BYTE_ENABLE(0, len)) + offset;
++
++		for (i = 0; i < len; i++, src++)
++			val |= (*(u8 *)src) << (8 * i);
++
++		writel(cpu_to_be32(val), pe[id].mem_access_wdata);
++		writel(addr, pe[id].mem_access_addr);
++	}
++}
++
++/** Writes a buffer to PE internal data memory (DMEM) from the host
++ * through indirect access registers.
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] src		Buffer source address
++ * @param[in] dst		DMEM destination address (must be 32bit aligned)
++ * @param[in] len		Number of bytes to copy
++ */
++void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
++{
++	pe_mem_memcpy_to32(id, pe[id].dmem_base_addr | dst | PE_MEM_ACCESS_DMEM, src, len);
++}
++
++
++/** Writes a buffer to PE internal program memory (PMEM) from the host
++ * through indirect access registers.
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID)
++ * @param[in] src		Buffer source address
++ * @param[in] dst		PMEM destination address (must be 32bit aligned)
++ * @param[in] len		Number of bytes to copy
++ */
++void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len)
++{
++	pe_mem_memcpy_to32(id, pe[id].pmem_base_addr | (dst & (pe[id].pmem_size - 1)) | PE_MEM_ACCESS_IMEM, src, len);
++}
++
++
++/** Reads PE internal program memory (IMEM) from the host
++ * through indirect access registers.
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID)
++ * @param[in] addr		PMEM read address (must be aligned on size)
++ * @param[in] size		Number of bytes to read (maximum 4, must not cross 32bit boundaries)
++ * @return			the data read (in PE endianess, i.e BE).
++ */
++u32 pe_pmem_read(int id, u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++	u32 mask = 0xffffffff >> ((4 - size) << 3);
++	u32 val;
++
++	addr = pe[id].pmem_base_addr | ((addr & ~0x3) & (pe[id].pmem_size - 1)) | PE_MEM_ACCESS_READ | PE_MEM_ACCESS_IMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
++
++	writel(addr, pe[id].mem_access_addr);
++	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
++
++	return (val >> (offset << 3)) & mask;
++}
++
++
++/** Writes PE internal data memory (DMEM) from the host
++ * through indirect access registers.
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] addr		DMEM write address (must be aligned on size)
++ * @param[in] val		Value to write (in PE endianess, i.e BE)
++ * @param[in] size		Number of bytes to write (maximum 4, must not cross 32bit boundaries)
++ */
++void pe_dmem_write(int id, u32 val, u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++
++	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
++
++	/* Indirect access interface is byte swapping data being written */
++	writel(cpu_to_be32(val << (offset << 3)), pe[id].mem_access_wdata);
++	writel(addr, pe[id].mem_access_addr);
++}
++
++
++/** Reads PE internal data memory (DMEM) from the host
++ * through indirect access registers.
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] addr		DMEM read address (must be aligned on size)
++ * @param[in] size		Number of bytes to read (maximum 4, must not cross 32bit boundaries)
++ * @return			the data read (in PE endianess, i.e BE).
++ */
++u32 pe_dmem_read(int id, u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++	u32 mask = 0xffffffff >> ((4 - size) << 3);
++	u32 val;
++
++	addr = pe[id].dmem_base_addr | (addr & ~0x3) | PE_MEM_ACCESS_READ | PE_MEM_ACCESS_DMEM | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
++
++	writel(addr, pe[id].mem_access_addr);
++
++	/* Indirect access interface is byte swapping data being read */
++	val = be32_to_cpu(readl(pe[id].mem_access_rdata));
++
++	return (val >> (offset << 3)) & mask;
++}
++
++/** This function is used to write to CLASS internal bus peripherals (ccu, pe-lem) from the host
++* through indirect access registers.
++* @param[in]	val	value to write
++* @param[in]	addr	Address to write to (must be aligned on size)
++* @param[in]	size	Number of bytes to write (1, 2 or 4)
++*
++*/
++void class_bus_write(u32 val, u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++
++	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
++
++	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | PE_MEM_ACCESS_WRITE | (size << 24);
++
++	writel(cpu_to_be32(val << (offset << 3)), CLASS_BUS_ACCESS_WDATA);
++	writel(addr, CLASS_BUS_ACCESS_ADDR);
++}
++
++
++/** Reads from CLASS internal bus peripherals (ccu, pe-lem) from the host
++* through indirect access registers.
++* @param[in] addr	Address to read from (must be aligned on size)
++* @param[in] size	Number of bytes to read (1, 2 or 4)
++* @return		the read data
++*
++*/
++u32 class_bus_read(u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++	u32 mask = 0xffffffff >> ((4 - size) << 3);
++	u32 val;
++
++	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
++
++	addr = (addr & ~CLASS_BUS_ACCESS_BASE_MASK) | (size << 24);
++
++	writel(addr, CLASS_BUS_ACCESS_ADDR);
++	val = be32_to_cpu(readl(CLASS_BUS_ACCESS_RDATA));
++
++	return (val >> (offset << 3)) & mask;
++}
++
++/** Writes data to the cluster memory (PE_LMEM)
++* @param[in] dst	PE LMEM destination address (must be 32bit aligned)
++* @param[in] src	Buffer source address
++* @param[in] len	Number of bytes to copy
++*/
++void class_pe_lmem_memcpy_to32(u32 dst, const void *src, unsigned int len)
++{
++	u32 len32 = len >> 2;
++	int i;
++
++	for (i = 0; i < len32; i++, src += 4, dst += 4)
++		class_bus_write(*(u32 *)src, dst, 4);
++
++	if (len & 0x2)
++	{
++		class_bus_write(*(u16 *)src, dst, 2);
++		src += 2;
++		dst += 2;
++	}
++
++	if (len & 0x1)
++	{
++		class_bus_write(*(u8 *)src, dst, 1);
++		src++;
++		dst++;
++	}
++}
++
++/** Writes value to the cluster memory (PE_LMEM)
++* @param[in] dst	PE LMEM destination address (must be 32bit aligned)
++* @param[in] val	Value to write
++* @param[in] len	Number of bytes to write
++*/
++void class_pe_lmem_memset(u32 dst, int val, unsigned int len)
++{
++	u32 len32 = len >> 2;
++	int i;
++
++	val = val | (val << 8) | (val << 16) | (val << 24);
++	
++	for (i = 0; i < len32; i++, dst += 4)
++		class_bus_write(val, dst, 4);
++
++	if (len & 0x2)
++	{
++		class_bus_write(val, dst, 2);
++		dst += 2;
++	}
++
++	if (len & 0x1)
++	{
++		class_bus_write(val, dst, 1);
++		dst++;
++	}
++}
++
++/** Reads data from the cluster memory (PE_LMEM)
++* @param[out] dst		pointer to the source buffer data are copied to
++* @param[in] len		length in bytes of the amount of data to read from cluster memory
++* @param[in] offset	offset in bytes in the cluster memory where data are read from
++*/
++void pe_lmem_read(u32 *dst, u32 len, u32 offset)
++{
++	u32 len32 = len >> 2;
++	int i = 0;
++
++	for (i = 0; i < len32; dst++, i++, offset += 4)
++		*dst = class_bus_read(PE_LMEM_BASE_ADDR + offset, 4);
++
++	/* FIXME we may have an out of bounds access on dst */
++	if (len & 0x03)
++		*dst = class_bus_read(PE_LMEM_BASE_ADDR + offset, (len & 0x03));
++}
++
++/** Writes data to the cluster memory (PE_LMEM)
++* @param[in] src	pointer to the source buffer data are copied from
++* @param[in] len	length in bytes of the amount of data to write to the cluster memory
++* @param[in] offset	offset in bytes in the cluster memory where data are written to
++*/
++void pe_lmem_write(u32 *src, u32 len, u32 offset)
++{
++	u32 len32 = len >> 2;
++	int i = 0;
++
++	for (i = 0; i < len32; src++, i++, offset += 4)
++		class_bus_write(*src, PE_LMEM_BASE_ADDR + offset, 4);
++
++	/* FIXME we may have an out of bounds access on src */
++	if (len & 0x03)
++		class_bus_write(*src, PE_LMEM_BASE_ADDR + offset, (len & 0x03));
++}
++
++/** Writes UTIL program memory (DDR) from the host.
++ *
++ * @param[in] addr	Address to write (virtual, must be aligned on size)
++ * @param[in] val		Value to write (in PE endianess, i.e BE)
++ * @param[in] size		Number of bytes to write (2 or 4)
++ */
++static void util_pmem_write(u32 val, void *addr, u8 size)
++{
++	void *addr64 = (void *)((unsigned long)addr & ~0x7);
++	unsigned long off = 8 - ((unsigned long)addr & 0x7) - size;
++	
++	//IMEM should  be loaded as a 64bit swapped value in a 64bit aligned location
++	if (size == 4)
++		writel(be32_to_cpu(val), addr64 + off);
++	else
++		writew(be16_to_cpu((u16)val), addr64 + off);
++}
++
++
++/** Writes a buffer to UTIL program memory (DDR) from the host.
++ *
++ * @param[in] dst	Address to write (virtual, must be at least 16bit aligned)
++ * @param[in] src	Buffer to write (in PE endianess, i.e BE, must have same alignment as dst)
++ * @param[in] len	Number of bytes to write (must be at least 16bit aligned)
++ */
++static void util_pmem_memcpy(void *dst, const void *src, unsigned int len)
++{
++	unsigned int len32;
++	int i;
++
++	if ((unsigned long)src & 0x2) {
++		util_pmem_write(*(u16 *)src, dst, 2);
++		src += 2;
++		dst += 2;
++		len -= 2;
++	}
++
++	len32 = len >> 2;
++
++	for (i = 0; i < len32; i++, dst += 4, src += 4)
++		util_pmem_write(*(u32 *)src, dst, 4);
++
++	if (len & 0x2)
++		util_pmem_write(*(u16 *)src, dst, len & 0x2);
++}
++
++
++/** Loads an elf section into pmem
++ * Code needs to be at least 16bit aligned and only PROGBITS sections are supported
++ *
++ * @param[in] id	PE identification (CLASS0_ID, ..., TMU0_ID, ..., TMU3_ID)
++ * @param[in] data	pointer to the elf firmware
++ * @param[in] shdr	pointer to the elf section header
++ *
++ */
++static int pe_load_pmem_section(int id, const void *data, Elf32_Shdr *shdr)
++{
++	u32 offset = be32_to_cpu(shdr->sh_offset);
++	u32 addr = be32_to_cpu(shdr->sh_addr);
++	u32 size = be32_to_cpu(shdr->sh_size);
++	u32 type = be32_to_cpu(shdr->sh_type);
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	if (id == UTIL_ID)
++	{
++		printf("%s: unsuported pmem section for UTIL\n", __func__);
++		return -1;
++	}
++#endif
++
++	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3))
++	{
++		printf("%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
++			__func__, addr, (unsigned long) data + offset);
++
++		return -1;
++	}
++
++	if (addr & 0x1)
++	{
++		printf("%s: load address(%x) is not 16bit aligned\n", __func__, addr);
++		return -1;
++	}
++
++	if (size & 0x1)
++	{
++		printf("%s: load size(%x) is not 16bit aligned\n", __func__, size);
++		return -1;
++	}
++
++		dprintf("pmem pe%d @%x len %d\n",id, addr, size);
++	switch (type)
++        {
++        case SHT_PROGBITS:
++		pe_pmem_memcpy_to32(id, addr, data + offset, size);
++		break;
++
++	default:
++		printf("%s: unsuported section type(%x)\n", __func__, type);
++		return -1;
++		break;
++	}
++
++	return 0;
++}
++
++
++/** Loads an elf section into dmem
++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0
++ *
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] data		pointer to the elf firmware
++ * @param[in] shdr		pointer to the elf section header
++ *
++ */
++static int pe_load_dmem_section(int id, const void *data, Elf32_Shdr *shdr)
++{
++	u32 offset = be32_to_cpu(shdr->sh_offset);
++	u32 addr = be32_to_cpu(shdr->sh_addr);
++	u32 size = be32_to_cpu(shdr->sh_size);
++	u32 type = be32_to_cpu(shdr->sh_type);
++	u32 size32 = size >> 2;
++	int i;
++
++	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3))
++	{
++		printf("%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
++			__func__, addr, (unsigned long)data + offset);
++
++		return -1;
++	}
++
++	if (addr & 0x3)
++	{
++		printf("%s: load address(%x) is not 32bit aligned\n", __func__, addr);
++		return -1;
++	}
++
++	switch (type)
++        {
++        case SHT_PROGBITS:
++		dprintf("dmem pe%d @%x len %d\n",id, addr, size);
++		pe_dmem_memcpy_to32(id, addr, data + offset, size);
++		break;
++
++	case SHT_NOBITS:
++		dprintf("dmem zero pe%d @%x len %d\n",id, addr, size);
++		for (i = 0; i < size32; i++, addr += 4)
++			pe_dmem_write(id, 0, addr, 4);
++
++		if (size & 0x3)
++			pe_dmem_write(id, 0, addr, size & 0x3);
++
++		break;
++
++	default:
++		printf("%s: unsuported section type(%x)\n", __func__, type);
++		return -1;
++		break;
++	}
++
++	return 0;
++}
++
++
++/** Loads an elf section into DDR
++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0
++ *
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] data		pointer to the elf firmware
++ * @param[in] shdr		pointer to the elf section header
++ *
++ */
++static int pe_load_ddr_section(int id, const void *data, Elf32_Shdr *shdr)
++{
++	u32 offset = be32_to_cpu(shdr->sh_offset);
++	u32 addr = be32_to_cpu(shdr->sh_addr);
++	u32 size = be32_to_cpu(shdr->sh_size);
++	u32 type = be32_to_cpu(shdr->sh_type);
++	u32 flags = be32_to_cpu(shdr->sh_flags);
++
++	switch (type)
++	{
++	case SHT_PROGBITS:
++		dprintf("ddr  pe%d @%x len %d\n",id, addr, size);
++		if (flags & SHF_EXECINSTR)
++		{
++			if (id <= CLASS_MAX_ID)
++			{
++				/* DO the loading only once in DDR */
++				if (id == CLASS0_ID)
++				{
++					dprintf("%s: load address(%x) and elf file address(%lx) rcvd\n", __func__, addr, (unsigned long)data + offset);
++					if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3))
++					{
++						printf("%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
++								__func__, addr, (unsigned long)data + offset);
++
++						return -1;
++					}
++
++					if (addr & 0x1)
++					{
++						printf("%s: load address(%x) is not 16bit aligned\n", __func__, addr);
++						return -1;
++					}
++
++					if (size & 0x1)
++					{
++						printf("%s: load length(%x) is not 16bit aligned\n", __func__, size);
++						return -1;
++					}
++
++					memcpy(DDR_PFE_TO_VIRT(addr), data + offset, size);
++				}
++			}
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++			else if (id == UTIL_ID)
++			{
++				if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3))
++				{
++					printf("%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
++								__func__, addr, (unsigned long)data + offset);
++
++					return -1;
++				}
++
++				if (addr & 0x1)
++				{
++					printf("%s: load address(%x) is not 16bit aligned\n", __func__, addr);
++					return -1;
++				}
++
++				if (size & 0x1)
++				{
++					printf("%s: load length(%x) is not 16bit aligned\n", __func__, size);
++					return -1;
++				}
++
++				util_pmem_memcpy((void *)DDR_PFE_TO_VIRT(addr), data + offset, size);
++			}
++#endif
++			else
++			{
++				printf("%s: unsuported ddr section type(%x) for PE(%d)\n", __func__, type, id);
++				return -1;
++			}
++
++		}
++		else
++		{
++			memcpy(DDR_PFE_TO_VIRT(addr), data + offset, size);
++		}
++
++		break;
++
++	case SHT_NOBITS:
++		dprintf("ddr zero pe%d @%x len %d\n",id, addr, size);
++		memset((void *)DDR_PFE_TO_VIRT(addr), 0, size);
++
++		break;
++
++	default:
++		printf("%s: unsuported section type(%x)\n", __func__, type);
++		return -1;
++		break;
++	}
++
++	return 0;
++}
++
++/** Loads an elf section into pe lmem
++ * Data needs to be at least 32bit aligned, NOBITS sections are correctly initialized to 0
++ *
++ * @param[in] id		PE identification (CLASS0_ID,..., CLASS5_ID)
++ * @param[in] data		pointer to the elf firmware
++ * @param[in] shdr		pointer to the elf section header
++ *
++ */
++static int pe_load_pe_lmem_section(int id, const void *data, Elf32_Shdr *shdr)
++{
++	u32 offset = be32_to_cpu(shdr->sh_offset);
++	u32 addr = be32_to_cpu(shdr->sh_addr);
++	u32 size = be32_to_cpu(shdr->sh_size);
++	u32 type = be32_to_cpu(shdr->sh_type);
++
++	if (id > CLASS_MAX_ID)
++	{
++		printf("%s: unsuported pe-lmem section type(%x) for PE(%d)\n", __func__, type, id);
++		return -1;
++	}
++	
++	if (((unsigned long)(data + offset) & 0x3) != (addr & 0x3))
++	{
++		printf("%s: load address(%x) and elf file address(%lx) don't have the same alignment\n",
++			__func__, addr, (unsigned long)data + offset);
++
++		return -1;
++	}
++
++	if (addr & 0x3)
++	{
++		printf("%s: load address(%x) is not 32bit aligned\n", __func__, addr);
++		return -1;
++	}
++	dprintf("lmem  pe%d @%x len %d\n",id, addr, size);
++	switch (type)
++	{
++	case SHT_PROGBITS:
++		class_pe_lmem_memcpy_to32(addr, data + offset, size);
++		break;
++
++	case SHT_NOBITS:
++		class_pe_lmem_memset(addr, 0, size);
++		break;
++
++	default:
++		printf("%s: unsuported section type(%x)\n", __func__, type);
++		return -1;
++		break;
++	}
++
++	return 0;
++}
++
++
++/** Loads an elf section into a PE
++ * For now only supports loading a section to dmem (all PE's), pmem (class and tmu PE's),
++ * DDDR (util PE code)
++ *
++ * @param[in] id		PE identification (CLASS0_ID, ..., TMU0_ID, ..., UTIL_ID)
++ * @param[in] data		pointer to the elf firmware
++ * @param[in] shdr		pointer to the elf section header
++ *
++ */
++int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr)
++{
++	u32 addr = be32_to_cpu(shdr->sh_addr);
++	u32 size = be32_to_cpu(shdr->sh_size);
++
++	//printf(".");
++	if (IS_DMEM(addr, size))
++		return pe_load_dmem_section(id, data, shdr);
++	else if (IS_PMEM(addr, size))
++		return pe_load_pmem_section(id, data, shdr);
++	else if (IS_PFE_LMEM(addr, size))
++		return 0; /* FIXME */
++	else if (IS_PHYS_DDR(addr, size))
++		return pe_load_ddr_section(id, data, shdr);
++	else if (IS_PE_LMEM(addr, size))
++		return pe_load_pe_lmem_section(id, data, shdr); 
++	else {
++		printf("%s: unsuported memory range(%x)\n", __func__, addr);
++		/*FIXME this should be remove after testing UTIL from 0x20000 */
++		//printf("loading DDR section \n");
++		//return pe_load_ddr_section(id, data, shdr);
++//		return -1;
++	}
++
++	return 0;
++}
++
++/** This function is used to write to UTIL internal bus peripherals from the host
++* through indirect access registers.
++* @param[in]	val	32bits value to write
++* @param[in]	addr	Address to write to
++* @param[in]	size	Number of bytes to write
++*
++*/
++void util_bus_write(u32 val, u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++	u32 access_addr;
++
++	access_addr = ((addr & ~0x3) & CLASS_BUS_ACCESS_ADDR_MASK) | PE_MEM_ACCESS_WRITE | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
++
++//	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
++
++	writel(cpu_to_be32(val << (offset << 3)), UTIL_BUS_ACCESS_WDATA);
++	writel(access_addr, UTIL_BUS_ACCESS_ADDR);
++}
++
++
++/** Reads from UTIL internal bus peripherals from the host
++* through indirect access registers.
++* @param[in] addr	Address to read from
++* @param[in] size	Number of bytes to read
++* @return		the read data
++*
++*/
++u32 util_bus_read(u32 addr, u8 size)
++{
++	u32 offset = addr & 0x3;
++	u32 mask = 0xffffffff >> ((4 - size) << 3);
++	u32 access_addr, val;
++
++	access_addr = ((addr & ~0x3) & CLASS_BUS_ACCESS_ADDR_MASK) | PE_MEM_ACCESS_READ | PE_MEM_ACCESS_BYTE_ENABLE(offset, size);
++
++//	writel((addr & CLASS_BUS_ACCESS_BASE_MASK), CLASS_BUS_ACCESS_BASE);
++
++	writel(access_addr, UTIL_BUS_ACCESS_ADDR);
++	val = be32_to_cpu(readl(UTIL_BUS_ACCESS_RDATA));
++
++	return (val >> (offset << 3)) & mask;
++}
++
++
++
++/**************************** BMU ***************************/
++
++/** Initializes a BMU block.
++* @param[in] base	BMU block base address
++* @param[in] cfg	BMU configuration
++*/
++void bmu_init(void *base, BMU_CFG *cfg)
++{
++
++	bmu_disable(base);
++
++	bmu_set_config(base, cfg);
++
++	bmu_reset(base);
++}
++
++/** Resets a BMU block.
++* @param[in] base	BMU block base address
++*/
++void bmu_reset(void *base)
++{
++	writel(CORE_SW_RESET, base + BMU_CTRL);
++
++	/* Wait for self clear */
++	while (readl(base + BMU_CTRL) & CORE_SW_RESET) ;
++}
++
++/** Enabled a BMU block.
++* @param[in] base	BMU block base address
++*/
++void bmu_enable(void *base)
++{
++	writel (CORE_ENABLE, base + BMU_CTRL);
++}
++
++/** Disables a BMU block.
++* @param[in] base	BMU block base address
++*/
++void bmu_disable(void *base)
++{
++	writel (CORE_DISABLE, base + BMU_CTRL);
++}
++
++/** Sets the configuration of a BMU block.
++* @param[in] base	BMU block base address
++* @param[in] cfg	BMU configuration
++*/
++void bmu_set_config(void *base, BMU_CFG *cfg)
++{	
++	writel (cfg->baseaddr, base + BMU_UCAST_BASE_ADDR);
++	writel (cfg->count & 0xffff, base + BMU_UCAST_CONFIG);
++	writel (cfg->size & 0xffff, base + BMU_BUF_SIZE);
++//	writel (BMU1_THRES_CNT, base + BMU_THRES);
++
++	/* Interrupts are never used */
++//	writel (0x0, base + BMU_INT_SRC);
++	writel (0x0, base + BMU_INT_ENABLE);
++}
++
++
++#if 0 //These are LS1012A functions
++/**************************** GEMAC ***************************/
++
++/** GEMAC block initialization.
++* @param[in] base	GEMAC base address (GEMAC0, GEMAC1, GEMAC2)
++* @param[in] cfg	GEMAC configuration
++*/
++void gemac_init(void *base, void *cfg)
++{
++	gemac_set_config(base, cfg);
++	gemac_set_bus_width(base, 64);
++}
++
++/** GEMAC set speed.
++* @param[in] base	GEMAC base address
++* @param[in] speed	GEMAC speed (10, 100 or 1000 Mbps)
++*/
++void gemac_set_speed(void *base, MAC_SPEED gem_speed)
++{
++	u32 val = readl(base + EMAC_NETWORK_CONFIG);
++
++	val = val & ~EMAC_SPEED_MASK;
++
++	switch (gem_speed)
++	{
++		case SPEED_10M:
++			val &= (~EMAC_PCS_ENABLE);
++			break;
++
++		case SPEED_100M:
++			val = val | EMAC_SPEED_100;
++			val &= (~EMAC_PCS_ENABLE);
++			break;
++
++		case SPEED_1000M:
++			val = val | EMAC_SPEED_1000;
++			val &= (~EMAC_PCS_ENABLE);
++			break;
++
++		case SPEED_1000M_PCS:
++			val = val | EMAC_SPEED_1000;
++			val |= EMAC_PCS_ENABLE;
++			break;
++
++		default:
++			val = val | EMAC_SPEED_100;
++			val &= (~EMAC_PCS_ENABLE);
++		break;
++	}
++	
++	writel (val, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC set duplex.
++* @param[in] base	GEMAC base address
++* @param[in] duplex	GEMAC duplex mode (Full, Half)
++*/
++void gemac_set_duplex(void *base, int duplex)
++{
++	u32 val = readl(base + EMAC_NETWORK_CONFIG);
++
++	if (duplex == DUPLEX_HALF)
++		val = (val & ~EMAC_DUPLEX_MASK) | EMAC_HALF_DUP;
++	else
++		val = (val & ~EMAC_DUPLEX_MASK) | EMAC_FULL_DUP;
++  
++	writel (val, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC set mode.
++* @param[in] base	GEMAC base address
++* @param[in] mode	GEMAC operation mode (MII, RMII, RGMII, SGMII)
++*/
++void gemac_set_mode(void *base, int mode)
++{
++	switch (mode)
++	{
++	case GMII:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_GMII_MODE_ENABLE, base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG);
++		break;
++
++	case RGMII:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_RGMII_MODE_ENABLE, base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG);
++		break;
++
++	case RMII:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_RMII_MODE_ENABLE, base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG);
++		break;
++
++	case MII:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_MII_MODE_ENABLE, base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG);
++		break;
++
++	case SGMII:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | (EMAC_RMII_MODE_DISABLE | EMAC_RGMII_MODE_DISABLE), base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_SGMII_MODE_ENABLE, base + EMAC_NETWORK_CONFIG);
++		break;
++
++	default:
++		writel ((readl(base + EMAC_CONTROL) & ~EMAC_MODE_MASK) | EMAC_MII_MODE_ENABLE, base + EMAC_CONTROL);
++		writel (readl(base + EMAC_NETWORK_CONFIG) & (~EMAC_SGMII_MODE_ENABLE), base + EMAC_NETWORK_CONFIG);
++		break;
++	}
++}
++
++/** GEMAC Enable MDIO: Activate the Management interface.  This is required to program the PHY
++ * @param[in] base       GEMAC base address
++ */
++void gemac_enable_mdio(void *base)
++{
++        u32 data;
++
++        data = readl(base + EMAC_NETWORK_CONTROL);
++        data |= EMAC_MDIO_EN;
++        writel(data, base + EMAC_NETWORK_CONTROL);
++}
++
++/** GEMAC Disable MDIO: Disable the Management interface.
++ * @param[in] base       GEMAC base address
++ */
++void gemac_disable_mdio(void *base)
++{
++        u32 data;
++
++        data = readl(base + EMAC_NETWORK_CONTROL);
++        data &= ~EMAC_MDIO_EN;
++        writel(data, base + EMAC_NETWORK_CONTROL);
++}
++
++/** GEMAC Set MDC clock division
++ * @param[in] base       GEMAC base address
++ * @param[in] base       MDC divider value
++ */
++void gemac_set_mdc_div(void *base, MAC_MDC_DIV gem_mdcdiv)
++{
++        u32 data;
++
++        data = readl(base + EMAC_NETWORK_CONFIG);
++	data &= ~(MDC_DIV_MASK << MDC_DIV_SHIFT);
++        data |= (gem_mdcdiv & MDC_DIV_MASK) << MDC_DIV_SHIFT;
++        writel(data, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC reset function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_reset(void *base)
++{  
++}
++
++/** GEMAC enable function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable(void *base)
++{  
++	writel (readl(base + EMAC_NETWORK_CONTROL) | EMAC_TX_ENABLE | EMAC_RX_ENABLE, base + EMAC_NETWORK_CONTROL);
++}
++
++/** GEMAC disable function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_disable(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONTROL) & ~(EMAC_TX_ENABLE | EMAC_RX_ENABLE), base + EMAC_NETWORK_CONTROL);
++}
++
++/** GEMAC set mac address configuration.
++* @param[in] base	GEMAC base address
++* @param[in] addr	MAC address to be configured
++*/
++void gemac_set_address(void *base, SPEC_ADDR *addr)
++{ 
++	writel(addr->one.bottom,	base + EMAC_SPEC1_ADD_BOT);
++	writel(addr->one.top,		base + EMAC_SPEC1_ADD_TOP); 
++	writel(addr->two.bottom,	base + EMAC_SPEC2_ADD_BOT);
++	writel(addr->two.top,		base + EMAC_SPEC2_ADD_TOP);
++	writel(addr->three.bottom,	base + EMAC_SPEC3_ADD_BOT);
++	writel(addr->three.top,		base + EMAC_SPEC3_ADD_TOP);
++	writel(addr->four.bottom,	base + EMAC_SPEC4_ADD_BOT);
++	writel(addr->four.top,		base + EMAC_SPEC4_ADD_TOP);
++} 
++
++/** GEMAC get mac address configuration.
++* @param[in] base	GEMAC base address
++*
++* @return		MAC addresses configured
++*/
++SPEC_ADDR gemac_get_address(void *base)
++{
++	SPEC_ADDR addr;
++	
++	addr.one.bottom = 	readl(base + EMAC_SPEC1_ADD_BOT);
++	addr.one.top = 		readl(base + EMAC_SPEC1_ADD_TOP); 
++	addr.two.bottom =	readl(base + EMAC_SPEC2_ADD_BOT);
++	addr.two.top =		readl(base + EMAC_SPEC2_ADD_TOP);
++	addr.three.bottom =	readl(base + EMAC_SPEC3_ADD_BOT);
++	addr.three.top =	readl(base + EMAC_SPEC3_ADD_TOP);
++	addr.four.bottom =	readl(base + EMAC_SPEC4_ADD_BOT);
++	addr.four.top =		readl(base + EMAC_SPEC4_ADD_TOP);
++	
++	return addr;
++}
++
++/** GEMAC set specific local addresses of the MAC.
++* Rather than setting up all four specific addresses, this function sets them up individually.
++*
++* @param[in] base	GEMAC base address
++* @param[in] addr	MAC address to be configured
++*/
++void gemac_set_laddr1(void *base, MAC_ADDR *address)
++{
++	writel(address->bottom,		base + EMAC_SPEC1_ADD_BOT);
++	writel(address->top,		base + EMAC_SPEC1_ADD_TOP); 
++}
++
++
++void gemac_set_laddr2(void *base, MAC_ADDR *address)
++{
++	writel(address->bottom,		base + EMAC_SPEC2_ADD_BOT);
++	writel(address->top,		base + EMAC_SPEC2_ADD_TOP); 
++}
++
++
++void gemac_set_laddr3(void *base, MAC_ADDR *address)
++{
++	writel(address->bottom,		base + EMAC_SPEC3_ADD_BOT);
++	writel(address->top,		base + EMAC_SPEC3_ADD_TOP); 
++}
++
++
++void gemac_set_laddr4(void *base, MAC_ADDR *address)
++{
++	writel(address->bottom,		base + EMAC_SPEC4_ADD_BOT);
++	writel(address->top,		base + EMAC_SPEC4_ADD_TOP); 
++}
++
++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index)
++{
++	if (entry_index < 5)
++	{	
++		writel(address->bottom,		base + (entry_index * 8) + EMAC_SPEC1_ADD_BOT);
++		writel(address->top,		base + (entry_index * 8) + EMAC_SPEC1_ADD_TOP);
++	} 
++	else 
++	{
++		writel(address->bottom,		base + ((entry_index - 5) * 8) + EMAC_SPEC5_ADD_BOT);
++		writel(address->top,		base + ((entry_index - 5) * 8) + EMAC_SPEC5_ADD_TOP);
++	}
++}
++
++/** Get specific local addresses of the MAC.
++* This allows returning of a single specific address stored in the MAC.
++* @param[in] base	GEMAC base address
++*
++* @return		Specific MAC address 1
++* 
++*/
++MAC_ADDR gem_get_laddr1(void *base)
++{
++	MAC_ADDR addr;
++	addr.bottom = readl(base + EMAC_SPEC1_ADD_BOT);
++	addr.top = readl(base + EMAC_SPEC1_ADD_TOP);
++	return addr;
++}
++
++
++MAC_ADDR gem_get_laddr2(void *base)
++{
++	MAC_ADDR addr;
++	addr.bottom = readl(base + EMAC_SPEC2_ADD_BOT);
++	addr.top = readl(base + EMAC_SPEC2_ADD_TOP);
++	return addr;
++}
++
++
++MAC_ADDR gem_get_laddr3(void *base)
++{
++	MAC_ADDR addr;
++	addr.bottom = readl(base + EMAC_SPEC3_ADD_BOT);
++	addr.top = readl(base + EMAC_SPEC3_ADD_TOP);
++	return addr;
++}
++
++
++MAC_ADDR gem_get_laddr4(void *base)
++{
++	MAC_ADDR addr;
++	addr.bottom = readl(base + EMAC_SPEC4_ADD_BOT);
++	addr.top = readl(base + EMAC_SPEC4_ADD_TOP);
++	return addr;
++}
++
++
++MAC_ADDR gem_get_laddrN(void *base, unsigned int entry_index)
++{
++	MAC_ADDR addr;
++
++	if (entry_index < 5)
++	{
++		addr.bottom = readl(base + (entry_index * 8) + EMAC_SPEC1_ADD_BOT);
++		addr.top = readl(base + (entry_index * 8) + EMAC_SPEC1_ADD_TOP);
++	}
++	else
++	{
++		addr.bottom = readl(base + ((entry_index - 5) * 8) + EMAC_SPEC5_ADD_BOT);
++		addr.top = readl(base + ((entry_index - 5) * 8) + EMAC_SPEC5_ADD_TOP);
++	}
++
++	return addr;
++}
++
++/** GEMAC allow frames
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable_copy_all(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & EMAC_ENABLE_COPY_ALL, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC do not allow frames
++* @param[in] base	GEMAC base address
++*/
++void gemac_disable_copy_all(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_COPY_ALL, base + EMAC_NETWORK_CONFIG);
++}
++
++
++
++/** GEMAC allow broadcast function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_allow_broadcast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_NO_BROADCAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC no broadcast function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_no_broadcast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_NO_BROADCAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable unicast function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable_unicast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_UNICAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC disable unicast function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_disable_unicast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_UNICAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable multicast function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable_multicast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_MULTICAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC disable multicast function.
++* @param[in]	base	GEMAC base address
++*/
++void gemac_disable_multicast(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_MULTICAST, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable fcs rx function.
++* @param[in]	base	GEMAC base address
++*/
++void gemac_enable_fcs_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_FCS_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC disable fcs rx function.
++* @param[in]	base	GEMAC base address
++*/
++void gemac_disable_fcs_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_FCS_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable 1536 rx function.
++* @param[in]	base	GEMAC base address
++*/
++void gemac_enable_1536_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_1536_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC disable 1536 rx function.
++* @param[in]	base	GEMAC base address
++*/
++void gemac_disable_1536_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_1536_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable pause rx function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable_pause_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_PAUSE_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC disable pause rx function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_disable_pause_rx(void *base)
++{
++	writel (readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_PAUSE_RX, base + EMAC_NETWORK_CONFIG);
++}
++
++/** GEMAC enable rx checksum offload function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_enable_rx_checksum_offload(void *base)
++{
++	writel(readl(base + EMAC_NETWORK_CONFIG) | EMAC_ENABLE_CHKSUM_RX, base + EMAC_NETWORK_CONFIG);
++	writel(readl(CLASS_L4_CHKSUM_ADDR) | IPV4_CHKSUM_DROP, CLASS_L4_CHKSUM_ADDR);
++}
++
++/** GEMAC disable rx checksum offload function.
++* @param[in] base	GEMAC base address
++*/
++void gemac_disable_rx_checksum_offload(void *base)
++{
++	writel(readl(base + EMAC_NETWORK_CONFIG) & ~EMAC_ENABLE_CHKSUM_RX, base + EMAC_NETWORK_CONFIG);
++	writel(readl(CLASS_L4_CHKSUM_ADDR) & ~IPV4_CHKSUM_DROP, CLASS_L4_CHKSUM_ADDR);
++}
++
++/** Sets Gemac bus width to 64bit
++ * @param[in] base       GEMAC base address
++ * @param[in] width	gemac bus width to be set possible values are 32/64/128
++ * */
++void gemac_set_bus_width(void *base, int width)
++{
++	u32 val = readl(base + EMAC_NETWORK_CONFIG);
++	switch(width) 
++	{
++	case 32:
++		val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_32;
++	case 128:
++		val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_128;
++	case 64:
++	default:
++		val = (val & ~EMAC_DATA_BUS_WIDTH_MASK) | EMAC_DATA_BUS_WIDTH_64;
++
++	}
++	writel (val, base + EMAC_NETWORK_CONFIG);
++}
++
++/** Sets Gemac configuration.
++* @param[in] base	GEMAC base address
++* @param[in] cfg	GEMAC configuration
++*/
++void gemac_set_config(void *base, GEMAC_CFG *cfg)
++{
++	gemac_set_mode(base, cfg->mode);
++
++	gemac_set_speed(base, cfg->speed);
++
++	gemac_set_duplex(base,cfg->duplex);
++}
++#endif
++
++/**************************** GPI ***************************/
++
++/** Initializes a GPI block.
++* @param[in] base	GPI base address
++* @param[in] cfg	GPI configuration
++*/
++void gpi_init(void *base, GPI_CFG *cfg)
++{ 
++	gpi_reset(base);
++	
++	gpi_disable(base);
++	
++	gpi_set_config(base, cfg);
++}
++
++/** Resets a GPI block.
++* @param[in] base	GPI base address
++*/
++void gpi_reset(void *base)
++{
++	writel (CORE_SW_RESET, base + GPI_CTRL);
++}
++
++/** Enables a GPI block.
++* @param[in] base	GPI base address
++*/
++void gpi_enable(void *base)
++{
++	writel (CORE_ENABLE, base + GPI_CTRL);
++}
++
++/** Disables a GPI block.
++* @param[in] base	GPI base address
++*/
++void gpi_disable(void *base)
++{
++	writel (CORE_DISABLE, base + GPI_CTRL);
++}
++
++
++/** Sets the configuration of a GPI block.
++* @param[in] base	GPI base address
++* @param[in] cfg	GPI configuration
++*/
++void gpi_set_config(void *base, GPI_CFG *cfg)
++{  
++	writel (CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL),	base + GPI_LMEM_ALLOC_ADDR);
++	writel (CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_FREE_CTRL),	base + GPI_LMEM_FREE_ADDR);
++	writel (CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_ALLOC_CTRL),	base + GPI_DDR_ALLOC_ADDR);
++	writel (CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL),	base + GPI_DDR_FREE_ADDR);
++	writel (CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR),			base + GPI_CLASS_ADDR);
++ 	writel (DDR_HDR_SIZE,						base + GPI_DDR_DATA_OFFSET);
++	writel (LMEM_HDR_SIZE,						base + GPI_LMEM_DATA_OFFSET);
++	writel (0,							base + GPI_LMEM_SEC_BUF_DATA_OFFSET);
++	writel (0,							base + GPI_DDR_SEC_BUF_DATA_OFFSET);
++	writel ((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE,			base + GPI_HDR_SIZE);
++	writel ((DDR_BUF_SIZE << 16) | LMEM_BUF_SIZE,			base + GPI_BUF_SIZE);
++	
++	writel (((cfg->lmem_rtry_cnt << 16) | (GPI_DDR_BUF_EN << 1) | GPI_LMEM_BUF_EN),	base + GPI_RX_CONFIG);
++	writel (cfg->tmlf_txthres,					base + GPI_TMLF_TX);
++	writel (cfg->aseq_len,						base + GPI_DTX_ASEQ);
++}
++
++/**************************** CLASSIFIER ***************************/
++
++/** Initializes CLASSIFIER block.
++* @param[in] cfg	CLASSIFIER configuration
++*/
++void class_init(CLASS_CFG *cfg)
++{
++	class_reset();
++	
++	class_disable();
++	
++	class_set_config(cfg);
++}
++
++/** Resets CLASSIFIER block.
++*
++*/
++void class_reset(void)
++{
++	writel(CORE_SW_RESET, CLASS_TX_CTRL);
++}
++
++/** Enables all CLASS-PE's cores.
++*
++*/
++void class_enable(void)
++{
++	writel(CORE_ENABLE, CLASS_TX_CTRL);
++}
++
++/** Disables all CLASS-PE's cores.
++*
++*/
++void class_disable(void)
++{
++	writel(CORE_DISABLE, CLASS_TX_CTRL); 
++}
++
++/** Sets the configuration of the CLASSIFIER block.
++* @param[in] cfg	CLASSIFIER configuration
++*/
++void class_set_config(CLASS_CFG *cfg)
++{
++	if (PLL_CLK_EN == 0)
++		writel(0x0,     CLASS_PE_SYS_CLK_RATIO);        // Clock ratio: for 1:1 the value is 0
++	else
++		writel(0x1,     CLASS_PE_SYS_CLK_RATIO);        // Clock ratio: for 1:2 the value is 1
++
++	writel((DDR_HDR_SIZE << 16) | LMEM_HDR_SIZE,	CLASS_HDR_SIZE);
++	writel(LMEM_BUF_SIZE,				CLASS_LMEM_BUF_SIZE);
++	writel(CLASS_ROUTE_ENTRY_SIZE(CLASS_ROUTE_SIZE) | CLASS_ROUTE_HASH_SIZE(cfg->route_table_hash_bits),	CLASS_ROUTE_HASH_ENTRY_SIZE);
++	writel(HASH_CRC_PORT_IP | QB2BUS_LE, CLASS_ROUTE_MULTI);
++
++	writel(cfg->route_table_baseaddr,		CLASS_ROUTE_TABLE_BASE);
++	memset((void *)DDR_PFE_TO_VIRT(cfg->route_table_baseaddr), 0, ROUTE_TABLE_SIZE);
++
++	writel(CLASS_PE0_RO_DM_ADDR0_VAL,		CLASS_PE0_RO_DM_ADDR0);
++	writel(CLASS_PE0_RO_DM_ADDR1_VAL,		CLASS_PE0_RO_DM_ADDR1);
++	writel(CLASS_PE0_QB_DM_ADDR0_VAL,		CLASS_PE0_QB_DM_ADDR0);
++	writel(CLASS_PE0_QB_DM_ADDR1_VAL,		CLASS_PE0_QB_DM_ADDR1);
++	writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR),	CLASS_TM_INQ_ADDR);
++
++	writel(23, CLASS_AFULL_THRES);
++	writel(23, CLASS_TSQ_FIFO_THRES);
++
++	writel(24, CLASS_MAX_BUF_CNT);
++	writel(24, CLASS_TSQ_MAX_CNT);
++	//writel(1, CLASS_USE_TMU_INQ);
++}
++
++/**************************** TMU ***************************/
++
++void tmu_reset(void)
++{
++	writel(SW_RESET, TMU_CTRL);
++}
++
++/** Initializes TMU block.
++* @param[in] cfg	TMU configuration
++*/
++void tmu_init(TMU_CFG *cfg)
++{
++	int q, phyno;
++
++	/* keep in soft reset */
++	writel(SW_RESET,                     TMU_CTRL);
++
++	/* enable EMAC PHY ports */
++	writel(0x3,						TMU_SYS_GENERIC_CONTROL);
++
++	writel(750,						TMU_INQ_WATERMARK);
++	writel(CBUS_VIRT_TO_PFE(EGPI1_BASE_ADDR + GPI_INQ_PKTPTR),	TMU_PHY0_INQ_ADDR);
++	writel(CBUS_VIRT_TO_PFE(EGPI2_BASE_ADDR + GPI_INQ_PKTPTR),	TMU_PHY1_INQ_ADDR);
++#if !defined(CONFIG_LS1012A)
++	writel(CBUS_VIRT_TO_PFE(EGPI3_BASE_ADDR + GPI_INQ_PKTPTR),	TMU_PHY2_INQ_ADDR);
++#endif
++	writel(CBUS_VIRT_TO_PFE(HGPI_BASE_ADDR + GPI_INQ_PKTPTR),	TMU_PHY3_INQ_ADDR);
++	writel(CBUS_VIRT_TO_PFE(HIF_NOCPY_RX_INQ0_PKTPTR),		TMU_PHY4_INQ_ADDR);
++	writel(CBUS_VIRT_TO_PFE(UTIL_INQ_PKTPTR),			TMU_PHY5_INQ_ADDR);
++	writel(CBUS_VIRT_TO_PFE(BMU2_BASE_ADDR + BMU_FREE_CTRL), 	TMU_BMU_INQ_ADDR);
++
++	writel(0x3FF,	TMU_TDQ0_SCH_CTRL);	// enabling all 10 schedulers [9:0] of each TDQ 
++	writel(0x3FF,	TMU_TDQ1_SCH_CTRL);
++#if !defined(CONFIG_LS1012A)
++	writel(0x3FF,	TMU_TDQ2_SCH_CTRL);
++#endif
++	writel(0x3FF,	TMU_TDQ3_SCH_CTRL);
++	
++	
++	if (PLL_CLK_EN == 0)
++		writel(0x0,	TMU_PE_SYS_CLK_RATIO);	// Clock ratio: for 1:1 the value is 0
++	else
++		writel(0x1,	TMU_PE_SYS_CLK_RATIO);	// Clock ratio: for 1:2 the value is 1
++
++	//printf("TMU_LLM_BASE_ADDR %x\n", cfg->llm_base_addr);
++	writel(cfg->llm_base_addr,	TMU_LLM_BASE_ADDR);	// Extra packet pointers will be stored from this address onwards
++	
++	//printf("TMU_LLM_QUE_LEN %x\n", cfg->llm_queue_len);
++	writel(cfg->llm_queue_len,	TMU_LLM_QUE_LEN);
++	writel(5,			TMU_TDQ_IIFG_CFG);
++	writel(DDR_BUF_SIZE,		TMU_BMU_BUF_SIZE);
++
++	writel(0x0,			TMU_CTRL);
++
++	/* MEM init */
++	//printf("%s: mem init\n", __func__);
++	writel(MEM_INIT,	TMU_CTRL);
++
++	while(!(readl(TMU_CTRL) & MEM_INIT_DONE)) 
++	;
++
++	/* LLM init */
++	//printf("%s: lmem init\n", __func__);
++	writel(LLM_INIT,	TMU_CTRL);
++
++	while(!(readl(TMU_CTRL) & LLM_INIT_DONE)) 
++	;
++
++	// set up each queue for tail drop
++	for (phyno = 0; phyno < 4; phyno++)
++	{
++#if !defined(CONFIG_LS1012A)
++		if(phyno = 2) continue;
++#endif
++		for (q = 0; q < 16; q++)
++		{
++			u32 qmax;
++			writel((phyno << 8) | q, TMU_TEQ_CTRL);
++			writel(1 << 22, TMU_TEQ_QCFG);
++			qmax = ((phyno == 3) || (q < 8)) ? 255 : 127;
++			writel(qmax << 18, TMU_TEQ_HW_PROB_CFG2);
++			writel(qmax >> 14, TMU_TEQ_HW_PROB_CFG3);
++		}
++	}
++	writel(0x05, TMU_TEQ_DISABLE_DROPCHK);
++	writel(0,	TMU_CTRL);
++}
++
++/** Enables TMU-PE cores.
++* @param[in] pe_mask	TMU PE mask
++*/
++void tmu_enable(u32 pe_mask)
++{
++	writel(readl(TMU_TX_CTRL) | (pe_mask & 0xF), TMU_TX_CTRL);
++}
++
++/** Disables TMU cores.
++* @param[in] pe_mask	TMU PE mask
++*/
++void tmu_disable(u32 pe_mask)
++{
++	writel(readl(TMU_TX_CTRL) & ~(pe_mask & 0xF), TMU_TX_CTRL);
++}
++
++/**************************** UTIL ***************************/
++
++/** Resets UTIL block.
++*/
++void util_reset(void)
++{
++	writel(CORE_SW_RESET, UTIL_TX_CTRL);
++}
++
++/** Initializes UTIL block.
++* @param[in] cfg	UTIL configuration
++*/
++void util_init(UTIL_CFG *cfg)
++{
++
++	//writel(0x1, UTIL_MISC_REG);
++
++	if (PLL_CLK_EN == 0)
++		writel(0x0,     UTIL_PE_SYS_CLK_RATIO);        // Clock ratio: for 1:1 the value is 0
++	else
++		writel(0x1,     UTIL_PE_SYS_CLK_RATIO);        // Clock ratio: for 1:2 the value is 1
++}
++
++/** Enables UTIL-PE core.
++*
++*/
++void util_enable(void)
++{
++	writel(CORE_ENABLE, UTIL_TX_CTRL);
++}
++
++/** Disables UTIL-PE core.
++*
++*/
++void util_disable(void)
++{
++	writel(CORE_DISABLE, UTIL_TX_CTRL);
++}
++
++#if 0
++/** GEMAC PHY Statistics - This function return address of the first statistics register
++* @param[in]	base	GEMAC base address 
++*/
++unsigned int * gemac_get_stats(void *base)
++{
++	return (unsigned int *)(base + EMAC_OCT_TX_BOT);
++}
++#endif
++
++/**************************** HIF ***************************/
++
++/** Initializes HIF no copy block.
++*
++*/
++void hif_nocpy_init(void)
++{
++	writel(4,							HIF_NOCPY_TX_PORT_NO);
++	writel(CBUS_VIRT_TO_PFE(BMU1_BASE_ADDR + BMU_ALLOC_CTRL),		HIF_NOCPY_LMEM_ALLOC_ADDR);
++	writel(CBUS_VIRT_TO_PFE(CLASS_INQ_PKTPTR),	HIF_NOCPY_CLASS_ADDR);
++	writel(CBUS_VIRT_TO_PFE(TMU_PHY_INQ_PKTPTR),	HIF_NOCPY_TMU_PORT0_ADDR);
++}
++
++/** Initializes HIF copy block.
++*
++*/
++void hif_init(void)
++{
++	/*Initialize HIF registers*/
++	writel(HIF_RX_POLL_CTRL_CYCLE<<16|HIF_TX_POLL_CTRL_CYCLE, HIF_POLL_CTRL); 
++}
++
++/** Enable hif tx DMA and interrupt
++*
++*/
++void hif_tx_enable(void)
++{
++	/*TODO not sure poll_cntrl_en is required or not */
++	writel( HIF_CTRL_DMA_EN, HIF_TX_CTRL);
++	//writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_TXPKT_INT_EN), HIF_INT_ENABLE);
++}
++
++/** Disable hif tx DMA and interrupt
++*
++*/
++void hif_tx_disable(void)
++{
++	u32	hif_int;
++
++	writel(0, HIF_TX_CTRL);
++
++	hif_int = readl(HIF_INT_ENABLE);
++	hif_int &= HIF_TXPKT_INT_EN;
++	writel(hif_int, HIF_INT_ENABLE);
++}
++
++/** Enable hif rx DMA and interrupt
++*
++*/
++void hif_rx_enable(void)
++{
++	/*TODO not sure poll_cntrl_en is required or not */
++	writel((HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL);
++	//writel((readl(HIF_INT_ENABLE) | HIF_INT_EN | HIF_RXPKT_INT_EN), HIF_INT_ENABLE);
++}
++
++/** Disable hif rx DMA and interrupt
++*
++*/
++void hif_rx_disable(void)
++{
++	u32	hif_int;
++
++	writel(0, HIF_RX_CTRL);
++
++	hif_int = readl(HIF_INT_ENABLE);
++	hif_int &= HIF_RXPKT_INT_EN;
++	writel(hif_int, HIF_INT_ENABLE);
++
++}
+diff --git a/drivers/net/pfe_eth/pfe/cbus.h b/drivers/net/pfe_eth/pfe/cbus.h
+new file mode 100644
+index 0000000..778fe45
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus.h
+@@ -0,0 +1,74 @@
++#ifndef _CBUS_H_
++#define _CBUS_H_
++
++#define EMAC1_BASE_ADDR		(CBUS_BASE_ADDR + 0x200000)
++#define EGPI1_BASE_ADDR		(CBUS_BASE_ADDR + 0x210000)
++#define EMAC2_BASE_ADDR		(CBUS_BASE_ADDR + 0x220000)
++#define EGPI2_BASE_ADDR		(CBUS_BASE_ADDR + 0x230000)
++#define BMU1_BASE_ADDR		(CBUS_BASE_ADDR + 0x240000)
++#define BMU2_BASE_ADDR		(CBUS_BASE_ADDR + 0x250000)
++#define ARB_BASE_ADDR		(CBUS_BASE_ADDR + 0x260000) /* FIXME not documented */
++#define DDR_CONFIG_BASE_ADDR	(CBUS_BASE_ADDR + 0x270000) /* FIXME not documented */
++#define HIF_BASE_ADDR		(CBUS_BASE_ADDR + 0x280000)
++#define HGPI_BASE_ADDR		(CBUS_BASE_ADDR + 0x290000)
++#define LMEM_BASE_ADDR		(CBUS_BASE_ADDR + 0x300000)
++#define LMEM_SIZE		0x10000
++#define LMEM_END		(LMEM_BASE_ADDR + LMEM_SIZE)
++#define TMU_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x310000)
++#define CLASS_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x320000)
++#if !defined(CONFIG_LS1012A)
++#define EMAC3_BASE_ADDR		(CBUS_BASE_ADDR + 0x330000)
++#define EGPI3_BASE_ADDR		(CBUS_BASE_ADDR + 0x340000)
++#endif
++#define HIF_NOCPY_BASE_ADDR	(CBUS_BASE_ADDR + 0x350000)
++#define UTIL_CSR_BASE_ADDR	(CBUS_BASE_ADDR + 0x360000)
++#define CBUS_GPT_BASE_ADDR	(CBUS_BASE_ADDR + 0x370000)
++
++#define IS_LMEM(addr, len)	(((unsigned long)(addr) >= LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= LMEM_END))
++
++/** 
++* \defgroup XXX_MEM_ACCESS_ADDR PE memory access through CSR 
++* XXX_MEM_ACCESS_ADDR register bit definitions. 
++* @{
++*/
++#define PE_MEM_ACCESS_WRITE		(1<<31)			/**< Internal Memory Write. */
++#define PE_MEM_ACCESS_READ		(0<<31)			/**< Internal Memory Read. */
++#define PE_MEM_ACCESS_IMEM		(1<<15)
++#define PE_MEM_ACCESS_DMEM		(1<<16)
++#define PE_MEM_ACCESS_BYTE_ENABLE(offset,size)	(((((1 << (size)) - 1) << (4 - (offset) - (size))) & 0xf) << 24)	/**< Byte Enables of the Internal memory access. These are interpred in BE */
++// @}
++#include "cbus/emac.h"
++#include "cbus/gpi.h"
++#include "cbus/bmu.h"
++#include "cbus/hif.h"
++#include "cbus/tmu_csr.h"
++#include "cbus/class_csr.h"
++#include "cbus/hif_nocpy.h"
++#include "cbus/util_csr.h"
++#include "cbus/gpt.h"
++
++
++/* PFE cores states */
++#define CORE_DISABLE	0x00000000 
++#define CORE_ENABLE	0x00000001
++#define CORE_SW_RESET	0x00000002
++
++/* LMEM defines */
++#define LMEM_HDR_SIZE		0x0010
++#define LMEM_BUF_SIZE_LN2	0x7
++#define LMEM_BUF_SIZE		(1 << LMEM_BUF_SIZE_LN2)
++
++/* DDR defines */
++#define DDR_HDR_SIZE		0x0100
++#define DDR_BUF_SIZE_LN2	0xb
++#define DDR_BUF_SIZE		(1 << DDR_BUF_SIZE_LN2)
++
++
++/* Clock generation through PLL */
++#if defined(CONFIG_PLATFORM_PCI)
++#define PLL_CLK_EN	0
++#else
++#define PLL_CLK_EN	1
++#endif
++
++#endif /* _CBUS_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/bmu.h b/drivers/net/pfe_eth/pfe/cbus/bmu.h
+new file mode 100644
+index 0000000..f3e5e6d
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/bmu.h
+@@ -0,0 +1,37 @@
++#ifndef _BMU_H_
++#define _BMU_H_
++
++#define BMU_VERSION		0x000
++#define BMU_CTRL		0x004
++#define BMU_UCAST_CONFIG	0x008
++#define BMU_UCAST_BASE_ADDR	0x00c
++#define BMU_BUF_SIZE		0x010
++#define BMU_BUF_CNT		0x014
++#define BMU_THRES		0x018
++#define BMU_INT_SRC		0x020
++#define BMU_INT_ENABLE		0x024
++#define BMU_ALLOC_CTRL		0x030
++#define BMU_FREE_CTRL		0x034
++#define BMU_FREE_ERR_ADDR	0x038
++#define BMU_CURR_BUF_CNT	0x03c
++#define BMU_MCAST_CNT		0x040
++#define BMU_MCAST_ALLOC_CTRL	0x044
++#define BMU_REM_BUF_CNT		0x048
++#define BMU_LOW_WATERMARK	0x050
++#define BMU_HIGH_WATERMARK	0x054
++#define BMU_INT_MEM_ACCESS	0x100
++
++typedef struct {
++	u32 baseaddr;
++	u32 count;
++	u32 size;
++} BMU_CFG;
++
++
++#define BMU1_BUF_SIZE	LMEM_BUF_SIZE_LN2
++#define BMU2_BUF_SIZE	DDR_BUF_SIZE_LN2
++
++#define BMU2_MCAST_ALLOC_CTRL	BMU2_BASE_ADDR + BMU_MCAST_ALLOC_CTRL
++
++#endif /* _BMU_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/cbus/class_csr.h b/drivers/net/pfe_eth/pfe/cbus/class_csr.h
+new file mode 100644
+index 0000000..f3151ec
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/class_csr.h
+@@ -0,0 +1,206 @@
++#ifndef _CLASS_CSR_H_
++#define _CLASS_CSR_H_
++
++/** @file class_csr.h.
++ * class_csr - block containing all the classifier control and status register. Mapped on CBUS and accessible from all PE's and ARM.
++ */
++
++
++#define CLASS_VERSION			(CLASS_CSR_BASE_ADDR + 0x000)
++#define CLASS_TX_CTRL			(CLASS_CSR_BASE_ADDR + 0x004)
++#define CLASS_INQ_PKTPTR		(CLASS_CSR_BASE_ADDR + 0x010)
++#define CLASS_HDR_SIZE			(CLASS_CSR_BASE_ADDR + 0x014)	/**< (ddr_hdr_size[24:16], lmem_hdr_size[5:0]) */
++#define CLASS_HDR_SIZE_LMEM(off)	((off) & 0x3f)			/**< LMEM header size for the Classifier block.\ Data in the LMEM is written from this offset. */
++#define CLASS_HDR_SIZE_DDR(off)		(((off) & 0x1ff) << 16)		/**< DDR header size for the Classifier block.\ Data in the DDR is written from this offset. */
++
++#define CLASS_PE0_QB_DM_ADDR0		(CLASS_CSR_BASE_ADDR + 0x020)	/**< DMEM address of first [15:0] and second [31:16] buffers on QB side. */
++#define CLASS_PE0_QB_DM_ADDR1		(CLASS_CSR_BASE_ADDR + 0x024)	/**< DMEM address of third [15:0] and fourth [31:16] buffers on QB side. */
++
++#define CLASS_PE0_RO_DM_ADDR0		(CLASS_CSR_BASE_ADDR + 0x060)	/**< DMEM address of first [15:0] and second [31:16] buffers on RO side. */
++#define CLASS_PE0_RO_DM_ADDR1		(CLASS_CSR_BASE_ADDR + 0x064)	/**< DMEM address of third [15:0] and fourth [31:16] buffers on RO side. */
++
++/** @name Class PE memory access. Allows external PE's and HOST to read/write PMEM/DMEM memory ranges for each classifier PE.
++ */
++//@{
++#define CLASS_MEM_ACCESS_ADDR		(CLASS_CSR_BASE_ADDR + 0x100)	/**< {sr_pe_mem_cmd[31], csr_pe_mem_wren[27:24], csr_pe_mem_addr[23:0]}, See \ref XXX_MEM_ACCESS_ADDR for details. */ 
++#define CLASS_MEM_ACCESS_WDATA		(CLASS_CSR_BASE_ADDR + 0x104)	/**< Internal Memory Access Write Data [31:0] */
++#define CLASS_MEM_ACCESS_RDATA		(CLASS_CSR_BASE_ADDR + 0x108)	/**< Internal Memory Access Read Data [31:0] */
++//@}
++#define CLASS_TM_INQ_ADDR		(CLASS_CSR_BASE_ADDR + 0x114)
++#define CLASS_PE_STATUS			(CLASS_CSR_BASE_ADDR + 0x118)
++
++#define CLASS_PHY1_RX_PKTS		(CLASS_CSR_BASE_ADDR + 0x11c)
++#define CLASS_PHY1_TX_PKTS		(CLASS_CSR_BASE_ADDR + 0x120)
++#define CLASS_PHY1_LP_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x124)
++#define CLASS_PHY1_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x128)
++#define CLASS_PHY1_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x12c)
++#define CLASS_PHY1_L3_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x130)
++#define CLASS_PHY1_V4_PKTS		(CLASS_CSR_BASE_ADDR + 0x134)
++#define CLASS_PHY1_V6_PKTS		(CLASS_CSR_BASE_ADDR + 0x138)
++#define CLASS_PHY1_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x13c)
++#define CLASS_PHY1_TTL_ERR_PKTS		(CLASS_CSR_BASE_ADDR + 0x140)
++#define CLASS_PHY2_RX_PKTS		(CLASS_CSR_BASE_ADDR + 0x144)
++#define CLASS_PHY2_TX_PKTS		(CLASS_CSR_BASE_ADDR + 0x148)
++#define CLASS_PHY2_LP_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x14c)
++#define CLASS_PHY2_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x150)
++#define CLASS_PHY2_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x154)
++#define CLASS_PHY2_L3_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x158)
++#define CLASS_PHY2_V4_PKTS		(CLASS_CSR_BASE_ADDR + 0x15c)
++#define CLASS_PHY2_V6_PKTS		(CLASS_CSR_BASE_ADDR + 0x160)
++#define CLASS_PHY2_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x164)
++#define CLASS_PHY2_TTL_ERR_PKTS		(CLASS_CSR_BASE_ADDR + 0x168)
++#define CLASS_PHY3_RX_PKTS		(CLASS_CSR_BASE_ADDR + 0x16c)
++#define CLASS_PHY3_TX_PKTS		(CLASS_CSR_BASE_ADDR + 0x170)
++#define CLASS_PHY3_LP_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x174)
++#define CLASS_PHY3_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x178)
++#define CLASS_PHY3_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x17c)
++#define CLASS_PHY3_L3_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x180)
++#define CLASS_PHY3_V4_PKTS		(CLASS_CSR_BASE_ADDR + 0x184)
++#define CLASS_PHY3_V6_PKTS		(CLASS_CSR_BASE_ADDR + 0x188)
++#define CLASS_PHY3_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x18c)
++#define CLASS_PHY3_TTL_ERR_PKTS		(CLASS_CSR_BASE_ADDR + 0x190)
++#define CLASS_PHY1_ICMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x194)
++#define CLASS_PHY1_IGMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x198)
++#define CLASS_PHY1_TCP_PKTS		(CLASS_CSR_BASE_ADDR + 0x19c)
++#define CLASS_PHY1_UDP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1a0)
++#define CLASS_PHY2_ICMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1a4)
++#define CLASS_PHY2_IGMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1a8)
++#define CLASS_PHY2_TCP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1ac)
++#define CLASS_PHY2_UDP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1b0)
++#define CLASS_PHY3_ICMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1b4)
++#define CLASS_PHY3_IGMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1b8)
++#define CLASS_PHY3_TCP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1bc)
++#define CLASS_PHY3_UDP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1c0)
++#define CLASS_PHY4_ICMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1c4)
++#define CLASS_PHY4_IGMP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1c8)
++#define CLASS_PHY4_TCP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1cc)
++#define CLASS_PHY4_UDP_PKTS		(CLASS_CSR_BASE_ADDR + 0x1d0)
++#define CLASS_PHY4_RX_PKTS		(CLASS_CSR_BASE_ADDR + 0x1d4)
++#define CLASS_PHY4_TX_PKTS		(CLASS_CSR_BASE_ADDR + 0x1d8)
++#define CLASS_PHY4_LP_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x1dc)
++#define CLASS_PHY4_INTF_FAIL_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e0)
++#define CLASS_PHY4_INTF_MATCH_PKTS	(CLASS_CSR_BASE_ADDR + 0x1e4)
++#define CLASS_PHY4_L3_FAIL_PKTS		(CLASS_CSR_BASE_ADDR + 0x1e8)
++#define CLASS_PHY4_V4_PKTS		(CLASS_CSR_BASE_ADDR + 0x1ec)
++#define CLASS_PHY4_V6_PKTS		(CLASS_CSR_BASE_ADDR + 0x1f0)
++#define CLASS_PHY4_CHKSUM_ERR_PKTS	(CLASS_CSR_BASE_ADDR + 0x1f4)
++#define CLASS_PHY4_TTL_ERR_PKTS		(CLASS_CSR_BASE_ADDR + 0x1f8)
++
++#define CLASS_PE_SYS_CLK_RATIO		(CLASS_CSR_BASE_ADDR + 0x200)
++#define CLASS_AFULL_THRES		(CLASS_CSR_BASE_ADDR + 0x204)
++#define CLASS_GAP_BETWEEN_READS		(CLASS_CSR_BASE_ADDR + 0x208)
++#define CLASS_MAX_BUF_CNT		(CLASS_CSR_BASE_ADDR + 0x20c)
++#define CLASS_TSQ_FIFO_THRES		(CLASS_CSR_BASE_ADDR + 0x210)
++#define CLASS_TSQ_MAX_CNT		(CLASS_CSR_BASE_ADDR + 0x214)
++#define CLASS_IRAM_DATA_0		(CLASS_CSR_BASE_ADDR + 0x218)
++#define CLASS_IRAM_DATA_1		(CLASS_CSR_BASE_ADDR + 0x21c)
++#define CLASS_IRAM_DATA_2		(CLASS_CSR_BASE_ADDR + 0x220)
++#define CLASS_IRAM_DATA_3		(CLASS_CSR_BASE_ADDR + 0x224)
++
++#define CLASS_BUS_ACCESS_ADDR		(CLASS_CSR_BASE_ADDR + 0x228)
++#define CLASS_BUS_ACCESS_ADDR_MASK	(0x0001FFFF)	//bit 23:0 of PE peripheral address are stored in CLASS_BUS_ACCESS_ADDR
++
++#define CLASS_BUS_ACCESS_WDATA		(CLASS_CSR_BASE_ADDR + 0x22c)
++#define CLASS_BUS_ACCESS_RDATA		(CLASS_CSR_BASE_ADDR + 0x230)
++
++#define CLASS_ROUTE_HASH_ENTRY_SIZE	(CLASS_CSR_BASE_ADDR + 0x234)		/**< (route_entry_size[9:0], route_hash_size[23:16] (this is actually ln2(size))) */
++#define CLASS_ROUTE_ENTRY_SIZE(size)	 ((size) & 0x1ff)
++#define CLASS_ROUTE_HASH_SIZE(hash_bits) (((hash_bits) & 0xff) << 16)
++
++#define CLASS_ROUTE_TABLE_BASE		(CLASS_CSR_BASE_ADDR + 0x238)
++
++#define CLASS_ROUTE_MULTI		(CLASS_CSR_BASE_ADDR + 0x23c)
++#define CLASS_SMEM_OFFSET		(CLASS_CSR_BASE_ADDR + 0x240)
++#define CLASS_LMEM_BUF_SIZE		(CLASS_CSR_BASE_ADDR + 0x244)
++#define CLASS_VLAN_ID			(CLASS_CSR_BASE_ADDR + 0x248)
++#define CLASS_BMU1_BUF_FREE		(CLASS_CSR_BASE_ADDR + 0x24c)
++#define CLASS_USE_TMU_INQ		(CLASS_CSR_BASE_ADDR + 0x250)
++#define CLASS_VLAN_ID1			(CLASS_CSR_BASE_ADDR + 0x254)
++
++#define CLASS_BUS_ACCESS_BASE		(CLASS_CSR_BASE_ADDR + 0x258)
++#define CLASS_BUS_ACCESS_BASE_MASK	(0xFF000000)	//bit 31:24 of PE peripheral address are stored in CLASS_BUS_ACCESS_BASE
++
++#define CLASS_HIF_PARSE			(CLASS_CSR_BASE_ADDR + 0x25c)
++
++#define CLASS_HOST_PE0_GP		(CLASS_CSR_BASE_ADDR + 0x260)
++#define CLASS_PE0_GP			(CLASS_CSR_BASE_ADDR + 0x264)
++#define CLASS_HOST_PE1_GP		(CLASS_CSR_BASE_ADDR + 0x268)
++#define CLASS_PE1_GP			(CLASS_CSR_BASE_ADDR + 0x26c)
++#define CLASS_HOST_PE2_GP		(CLASS_CSR_BASE_ADDR + 0x270)
++#define CLASS_PE2_GP			(CLASS_CSR_BASE_ADDR + 0x274)
++#define CLASS_HOST_PE3_GP		(CLASS_CSR_BASE_ADDR + 0x278)
++#define CLASS_PE3_GP			(CLASS_CSR_BASE_ADDR + 0x27c)
++#define CLASS_HOST_PE4_GP		(CLASS_CSR_BASE_ADDR + 0x280)
++#define CLASS_PE4_GP			(CLASS_CSR_BASE_ADDR + 0x284)
++#define CLASS_HOST_PE5_GP		(CLASS_CSR_BASE_ADDR + 0x288)
++#define CLASS_PE5_GP			(CLASS_CSR_BASE_ADDR + 0x28c)
++
++#define CLASS_PE_INT_SRC		(CLASS_CSR_BASE_ADDR + 0x290)
++#define CLASS_PE_INT_ENABLE		(CLASS_CSR_BASE_ADDR + 0x294)
++
++#define CLASS_TPID0_TPID1		(CLASS_CSR_BASE_ADDR + 0x298)
++#define CLASS_TPID2			(CLASS_CSR_BASE_ADDR + 0x29c)
++
++#define CLASS_L4_CHKSUM_ADDR		(CLASS_CSR_BASE_ADDR + 0x2a0)
++
++#define CLASS_PE0_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2a4)
++#define CLASS_PE1_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2a8)
++#define CLASS_PE2_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2ac)
++#define CLASS_PE3_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2b0)
++#define CLASS_PE4_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2b4)
++#define CLASS_PE5_DEBUG			(CLASS_CSR_BASE_ADDR + 0x2b8)
++
++#define CLASS_STATE			(CLASS_CSR_BASE_ADDR + 0x2bc)
++
++/* CLASS defines */
++#define CLASS_PBUF_SIZE			0x100	/* Fixed by hardware */
++#define CLASS_PBUF_HEADER_OFFSET	0x80	/* Can be configured */
++
++#define CLASS_PBUF0_BASE_ADDR		0x000						/* Can be configured */
++#define CLASS_PBUF1_BASE_ADDR		(CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_SIZE)	/* Can be configured */
++#define CLASS_PBUF2_BASE_ADDR		(CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_SIZE)	/* Can be configured */
++#define CLASS_PBUF3_BASE_ADDR		(CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_SIZE)	/* Can be configured */
++
++#define CLASS_PBUF0_HEADER_BASE_ADDR	(CLASS_PBUF0_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET)
++#define CLASS_PBUF1_HEADER_BASE_ADDR	(CLASS_PBUF1_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET)
++#define CLASS_PBUF2_HEADER_BASE_ADDR	(CLASS_PBUF2_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET)
++#define CLASS_PBUF3_HEADER_BASE_ADDR	(CLASS_PBUF3_BASE_ADDR + CLASS_PBUF_HEADER_OFFSET)
++
++#define CLASS_PE0_RO_DM_ADDR0_VAL	((CLASS_PBUF1_BASE_ADDR << 16) | CLASS_PBUF0_BASE_ADDR)
++#define CLASS_PE0_RO_DM_ADDR1_VAL	((CLASS_PBUF3_BASE_ADDR << 16) | CLASS_PBUF2_BASE_ADDR)
++
++#define CLASS_PE0_QB_DM_ADDR0_VAL	((CLASS_PBUF1_HEADER_BASE_ADDR << 16) | CLASS_PBUF0_HEADER_BASE_ADDR)
++#define CLASS_PE0_QB_DM_ADDR1_VAL	((CLASS_PBUF3_HEADER_BASE_ADDR << 16) | CLASS_PBUF2_HEADER_BASE_ADDR)
++
++#define CLASS_ROUTE_SIZE		128
++#define CLASS_ROUTE_HASH_BITS		20
++#define CLASS_ROUTE_HASH_MASK		((1 << CLASS_ROUTE_HASH_BITS) - 1)
++
++#define	CLASS_ROUTE0_BASE_ADDR	0x400						/* Can be configured */
++#define CLASS_ROUTE1_BASE_ADDR	(CLASS_ROUTE0_BASE_ADDR + CLASS_ROUTE_SIZE)	/* Can be configured */
++#define CLASS_ROUTE2_BASE_ADDR	(CLASS_ROUTE1_BASE_ADDR + CLASS_ROUTE_SIZE)	/* Can be configured */
++#define CLASS_ROUTE3_BASE_ADDR	(CLASS_ROUTE2_BASE_ADDR + CLASS_ROUTE_SIZE)	/* Can be configured */
++
++#define TWO_LEVEL_ROUTE		(1 << 0)
++#define PHYNO_IN_HASH		(1 << 1)
++#define HW_ROUTE_FETCH		(1 << 3)
++#define HW_BRIDGE_FETCH		(1 << 5)
++#define IP_ALIGNED		(1 << 6)
++#define ARC_HIT_CHECK_EN	(1 << 7)
++#define CLASS_TOE		(1 << 11)
++#define HASH_NORMAL		(0 << 12)
++#define HASH_CRC_PORT		(1 << 12)
++#define HASH_CRC_IP		(2 << 12)
++#define HASH_CRC_PORT_IP	(3 << 12)
++#define QB2BUS_LE		(1 << 15)
++
++#define	TCP_CHKSUM_DROP		(1 << 0)
++#define	UDP_CHKSUM_DROP		(1 << 1)
++#define	IPV4_CHKSUM_DROP	(1 << 9)
++
++typedef struct {
++	u32 route_table_baseaddr;
++	u32 route_table_hash_bits;
++} CLASS_CFG;
++
++#endif /* _CLASS_CSR_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/emac.h b/drivers/net/pfe_eth/pfe/cbus/emac.h
+new file mode 100644
+index 0000000..1f308ce
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/emac.h
+@@ -0,0 +1,232 @@
++#ifndef _EMAC_H_
++#define _EMAC_H_
++
++#define EMAC_IEVENT_REG	0x004
++#define EMAC_IMASK_REG	0x008
++#define EMAC_R_DES_ACTIVE_REG	0x010
++#define EMAC_X_DES_ACTIVE_REG	0x014
++#define EMAC_ECNTRL_REG		0x024
++#define EMAC_MII_DATA_REG	0x040
++#define EMAC_MII_CTRL_REG	0x044
++#define EMAC_MIB_CTRL_STS_REG	0x064
++#define EMAC_RCNTRL_REG		0x084
++#define EMAC_TCNTRL_REG		0x0C4
++#define EMAC_PHY_ADDR_LOW	0x0E4
++#define EMAC_PHY_ADDR_HIGH	0x0E8
++#define EMAC_TFWR_STR_FWD	0x144
++#define EMAC_RX_SECTIOM_FULL	0x190
++#define EMAC_TX_SECTION_EMPTY	0x1A0
++#define EMAC_TRUNC_FL		0x1B0
++
++#define RMON_T_DROP		0x200 /* Count of frames not cntd correctly */
++#define RMON_T_PACKETS		0x204 /* RMON TX packet count */
++#define RMON_T_BC_PKT		0x208 /* RMON TX broadcast pkts */
++#define RMON_T_MC_PKT		0x20c /* RMON TX multicast pkts */
++#define RMON_T_CRC_ALIGN	0x210 /* RMON TX pkts with CRC align err */
++#define RMON_T_UNDERSIZE	0x214 /* RMON TX pkts < 64 bytes, good CRC */
++#define RMON_T_OVERSIZE		0x218 /* RMON TX pkts > MAX_FL bytes good CRC */
++#define RMON_T_FRAG		0x21c /* RMON TX pkts < 64 bytes, bad CRC */
++#define RMON_T_JAB		0x220 /* RMON TX pkts > MAX_FL bytes, bad CRC */
++#define RMON_T_COL		0x224 /* RMON TX collision count */
++#define RMON_T_P64		0x228 /* RMON TX 64 byte pkts */
++#define RMON_T_P65TO127		0x22c /* RMON TX 65 to 127 byte pkts */
++#define RMON_T_P128TO255	0x230 /* RMON TX 128 to 255 byte pkts */
++#define RMON_T_P256TO511	0x234 /* RMON TX 256 to 511 byte pkts */
++#define RMON_T_P512TO1023	0x238 /* RMON TX 512 to 1023 byte pkts */
++#define RMON_T_P1024TO2047	0x23c /* RMON TX 1024 to 2047 byte pkts */
++#define RMON_T_P_GTE2048	0x240 /* RMON TX pkts > 2048 bytes */
++#define RMON_T_OCTETS		0x244 /* RMON TX octets */
++#define IEEE_T_DROP		0x248 /* Count of frames not counted crtly */
++#define IEEE_T_FRAME_OK		0x24c /* Frames tx'd OK */
++#define IEEE_T_1COL		0x250 /* Frames tx'd with single collision */
++#define IEEE_T_MCOL		0x254 /* Frames tx'd with multiple collision */
++#define IEEE_T_DEF		0x258 /* Frames tx'd after deferral delay */
++#define IEEE_T_LCOL		0x25c /* Frames tx'd with late collision */
++#define IEEE_T_EXCOL		0x260 /* Frames tx'd with excesv collisions */
++#define IEEE_T_MACERR		0x264 /* Frames tx'd with TX FIFO underrun */
++#define IEEE_T_CSERR		0x268 /* Frames tx'd with carrier sense err */
++#define IEEE_T_SQE		0x26c /* Frames tx'd with SQE err */
++#define IEEE_T_FDXFC		0x270 /* Flow control pause frames tx'd */
++#define IEEE_T_OCTETS_OK	0x274 /* Octet count for frames tx'd w/o err */
++#define RMON_R_PACKETS		0x284 /* RMON RX packet count */
++#define RMON_R_BC_PKT		0x288 /* RMON RX broadcast pkts */
++#define RMON_R_MC_PKT		0x28c /* RMON RX multicast pkts */
++#define RMON_R_CRC_ALIGN	0x290 /* RMON RX pkts with CRC alignment err */
++#define RMON_R_UNDERSIZE	0x294 /* RMON RX pkts < 64 bytes, good CRC */
++#define RMON_R_OVERSIZE		0x298 /* RMON RX pkts > MAX_FL bytes good CRC */
++#define RMON_R_FRAG		0x29c /* RMON RX pkts < 64 bytes, bad CRC */
++#define RMON_R_JAB		0x2a0 /* RMON RX pkts > MAX_FL bytes, bad CRC */
++#define RMON_R_RESVD_O		0x2a4 /* Reserved */
++#define RMON_R_P64		0x2a8 /* RMON RX 64 byte pkts */
++#define RMON_R_P65TO127		0x2ac /* RMON RX 65 to 127 byte pkts */
++#define RMON_R_P128TO255	0x2b0 /* RMON RX 128 to 255 byte pkts */
++#define RMON_R_P256TO511	0x2b4 /* RMON RX 256 to 511 byte pkts */
++#define RMON_R_P512TO1023	0x2b8 /* RMON RX 512 to 1023 byte pkts */
++#define RMON_R_P1024TO2047	0x2bc /* RMON RX 1024 to 2047 byte pkts */
++#define RMON_R_P_GTE2048	0x2c0 /* RMON RX pkts > 2048 bytes */
++#define RMON_R_OCTETS		0x2c4 /* RMON RX octets */
++#define IEEE_R_DROP		0x2c8 /* Count frames not counted correctly */
++#define IEEE_R_FRAME_OK		0x2cc /* Frames rx'd OK */
++#define IEEE_R_CRC		0x2d0 /* Frames rx'd with CRC err */
++#define IEEE_R_ALIGN		0x2d4 /* Frames rx'd with alignment err */
++#define IEEE_R_MACERR		0x2d8 /* Receive FIFO overflow count */
++#define IEEE_R_FDXFC		0x2dc /* Flow control pause frames rx'd */
++#define IEEE_R_OCTETS_OK	0x2e0 /* Octet cnt for frames rx'd w/o err */
++
++
++/* GEMAC definitions and settings */
++
++#define EMAC_PORT_0			0
++#define EMAC_PORT_1			1
++
++/* GEMAC Bit definitions */
++#define EMAC_IEVENT_HBERR                0x80000000
++#define EMAC_IEVENT_BABR                 0x40000000
++#define EMAC_IEVENT_BABT                 0x20000000
++#define EMAC_IEVENT_GRA                  0x10000000
++#define EMAC_IEVENT_TXF                  0x08000000
++#define EMAC_IEVENT_TXB                  0x04000000
++#define EMAC_IEVENT_RXF                  0x02000000
++#define EMAC_IEVENT_RXB                  0x01000000
++#define EMAC_IEVENT_MII                  0x00800000
++#define EMAC_IEVENT_EBERR                0x00400000
++#define EMAC_IEVENT_LC                   0x00200000
++#define EMAC_IEVENT_RL                   0x00100000
++#define EMAC_IEVENT_UN                   0x00080000
++
++#define EMAC_IMASK_HBERR                 0x80000000
++#define EMAC_IMASK_BABR                  0x40000000
++#define EMAC_IMASKT_BABT                 0x20000000
++#define EMAC_IMASK_GRA                   0x10000000
++#define EMAC_IMASKT_TXF                  0x08000000
++#define EMAC_IMASK_TXB                   0x04000000
++#define EMAC_IMASKT_RXF                  0x02000000
++#define EMAC_IMASK_RXB                   0x01000000
++#define EMAC_IMASK_MII                   0x00800000
++#define EMAC_IMASK_EBERR                 0x00400000
++#define EMAC_IMASK_LC                    0x00200000
++#define EMAC_IMASKT_RL                   0x00100000
++#define EMAC_IMASK_UN                    0x00080000
++
++#define EMAC_RCNTRL_MAX_FL_SHIFT         16
++#define EMAC_RCNTRL_LOOP                 0x00000001
++#define EMAC_RCNTRL_DRT                  0x00000002
++#define EMAC_RCNTRL_MII_MODE             0x00000004
++#define EMAC_RCNTRL_PROM                 0x00000008
++#define EMAC_RCNTRL_BC_REJ               0x00000010
++#define EMAC_RCNTRL_FCE                  0x00000020
++#define EMAC_RCNTRL_RGMII                0x00000040
++#define EMAC_RCNTRL_SGMII                0x00000080
++#define EMAC_RCNTRL_RMII                 0x00000100
++#define EMAC_RCNTRL_RMII_10T             0x00000200
++#define EMAC_RCNTRL_CRC_FWD		 0x00004000
++
++#define EMAC_TCNTRL_GTS                  0x00000001
++#define EMAC_TCNTRL_HBC                  0x00000002
++#define EMAC_TCNTRL_FDEN                 0x00000004
++#define EMAC_TCNTRL_TFC_PAUSE            0x00000008
++#define EMAC_TCNTRL_RFC_PAUSE            0x00000010
++
++#define EMAC_ECNTRL_RESET                0x00000001      /* reset the EMAC */
++#define EMAC_ECNTRL_ETHER_EN             0x00000002      /* enable the EMAC */
++#define EMAC_ECNTRL_SPEED                0x00000020
++#define EMAC_ECNTRL_DBSWAP               0x00000100
++
++#define EMAC_X_WMRK_STRFWD               0x00000100
++
++#define EMAC_X_DES_ACTIVE_TDAR           0x01000000
++#define EMAC_R_DES_ACTIVE_RDAR           0x01000000
++
++
++
++/* The possible operating speeds of the MAC, currently supporting 10, 100 and
++ * 1000Mb modes.
++ */
++typedef enum {SPEED_10M, SPEED_100M, SPEED_1000M, SPEED_1000M_PCS} MAC_SPEED;
++
++#define GMII	1
++#define MII	2
++#define RMII	3
++#define RGMII	4
++#define SGMII	5
++
++#define DUPLEX_HALF	0x00
++#define DUPLEX_FULL	0x01
++
++
++/* Default configuration */
++#define EMAC0_DEFAULT_DUPLEX_MODE	FULLDUPLEX 
++#define EMAC0_DEFAULT_EMAC_MODE		RGMII      
++#define EMAC0_DEFAULT_EMAC_SPEED	SPEED_1000M   
++
++#define EMAC1_DEFAULT_DUPLEX_MODE	FULLDUPLEX 
++#define EMAC1_DEFAULT_EMAC_MODE		SGMII      
++#define EMAC1_DEFAULT_EMAC_SPEED	SPEED_1000M   
++
++/* MII-related definitios */
++#define EMAC_MII_DATA_ST         0x40000000      /* Start of frame delimiter */
++#define EMAC_MII_DATA_OP_RD      0x20000000      /* Perform a read operation */
++#define EMAC_MII_DATA_OP_WR      0x10000000      /* Perform a write operation */
++#define EMAC_MII_DATA_PA_MSK     0x0f800000      /* PHY Address field mask */
++#define EMAC_MII_DATA_RA_MSK     0x007c0000      /* PHY Register field mask */
++#define EMAC_MII_DATA_TA         0x00020000      /* Turnaround */
++#define EMAC_MII_DATA_DATAMSK    0x0000ffff      /* PHY data field */
++
++#define EMAC_MII_DATA_RA_SHIFT   18      /* MII Register address bits */
++#define EMAC_MII_DATA_RA_MASK	 0x1F      /* MII Register address mask */
++#define EMAC_MII_DATA_PA_SHIFT   23      /* MII PHY address bits */
++#define EMAC_MII_DATA_PA_MASK    0x1F      /* MII PHY address mask */
++
++#define EMAC_MII_DATA_RA(v) ((v & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_RA_SHIFT)
++#define EMAC_MII_DATA_PA(v) ((v & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_PA_SHIFT)
++#define EMAC_MII_DATA(v)    (v & 0xffff)
++
++#define EMAC_MII_SPEED_SHIFT	1
++#define EMAC_HOLDTIME_SHIFT	8
++#define EMAC_HOLDTIME_MASK	0x7
++#define EMAC_HOLDTIME(v)	((v & EMAC_HOLDTIME_MASK) << EMAC_HOLDTIME_SHIFT)
++
++/* The Address organisation for the MAC device.  All addresses are split into
++ * two 32-bit register fields.  The first one (bottom) is the lower 32-bits of
++ * the address and the other field are the high order bits - this may be 16-bits
++ * in the case of MAC addresses, or 32-bits for the hash address.
++ * In terms of memory storage, the first item (bottom) is assumed to be at a
++ * lower address location than 'top'. i.e. top should be at address location of
++ * 'bottom' + 4 bytes.
++ */
++typedef struct {
++	u32 bottom;     /* Lower 32-bits of address. */
++	u32 top;        /* Upper 32-bits of address. */
++} MAC_ADDR;
++
++
++/* The following is the organisation of the address filters section of the MAC
++ * registers.  The Cadence MAC contains four possible specific address match
++ * addresses, if an incoming frame corresponds to any one of these four
++ * addresses then the frame will be copied to memory.
++ * It is not necessary for all four of the address match registers to be
++ * programmed, this is application dependant.
++ */
++typedef struct {
++	MAC_ADDR one;        /* Specific address register 1. */
++	MAC_ADDR two;        /* Specific address register 2. */
++	MAC_ADDR three;      /* Specific address register 3. */
++	MAC_ADDR four;       /* Specific address register 4. */
++} SPEC_ADDR;
++
++typedef struct {
++	u32 mode; 
++	u32 speed;
++	u32 duplex;
++} GEMAC_CFG;
++
++/* Internal PHY Registers - SGMII */
++#define PHY_SGMII_CR_PHY_RESET      0x8000
++#define PHY_SGMII_CR_RESET_AN       0x0200
++#define PHY_SGMII_CR_DEF_VAL        0x1140
++#define PHY_SGMII_DEV_ABILITY_SGMII 0x4001
++#define PHY_SGMII_IF_MODE_AN        0x0002
++#define PHY_SGMII_IF_MODE_SGMII     0x0001
++
++
++#endif /* _EMAC_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/gpi.h b/drivers/net/pfe_eth/pfe/cbus/gpi.h
+new file mode 100644
+index 0000000..d2d165f
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/gpi.h
+@@ -0,0 +1,60 @@
++#ifndef _GPI_H_
++#define _GPI_H_
++
++#define GPI_VERSION			0x00
++#define GPI_CTRL			0x04
++#define GPI_RX_CONFIG			0x08
++#define GPI_HDR_SIZE			0x0c
++#define GPI_BUF_SIZE			0x10
++#define GPI_LMEM_ALLOC_ADDR		0x14
++#define GPI_LMEM_FREE_ADDR		0x18
++#define GPI_DDR_ALLOC_ADDR		0x1c
++#define GPI_DDR_FREE_ADDR		0x20
++#define GPI_CLASS_ADDR			0x24
++#define GPI_DRX_FIFO			0x28
++#define GPI_TRX_FIFO			0x2c
++#define GPI_INQ_PKTPTR			0x30
++#define GPI_DDR_DATA_OFFSET		0x34
++#define GPI_LMEM_DATA_OFFSET		0x38
++#define GPI_TMLF_TX			0x4c
++#define GPI_DTX_ASEQ			0x50
++#define GPI_FIFO_STATUS			0x54
++#define GPI_FIFO_DEBUG			0x58
++#define GPI_TX_PAUSE_TIME		0x5c
++#define GPI_LMEM_SEC_BUF_DATA_OFFSET	0x60
++#define GPI_DDR_SEC_BUF_DATA_OFFSET	0x64
++#define GPI_TOE_CHKSUM_EN		0x68
++#define GPI_OVERRUN_DROPCNT		0x6c
++
++typedef struct {
++	u32 lmem_rtry_cnt;
++	u32 tmlf_txthres;
++	u32 aseq_len;
++} GPI_CFG;
++
++
++/* GPI commons defines */ 
++#define GPI_LMEM_BUF_EN		0x1
++#define GPI_DDR_BUF_EN		0x1
++
++/* EGPI 1 defines */ 
++#define EGPI1_LMEM_RTRY_CNT	0x40
++#define EGPI1_TMLF_TXTHRES	0xBC
++#define EGPI1_ASEQ_LEN		0x50
++
++/* EGPI 2 defines */ 
++#define EGPI2_LMEM_RTRY_CNT	0x40
++#define EGPI2_TMLF_TXTHRES	0xBC
++#define EGPI2_ASEQ_LEN		0x40
++
++/* EGPI 3 defines */ 
++#define EGPI3_LMEM_RTRY_CNT	0x40
++#define EGPI3_TMLF_TXTHRES	0xBC
++#define EGPI3_ASEQ_LEN		0x40
++
++/* HGPI defines */ 
++#define HGPI_LMEM_RTRY_CNT	0x40
++#define HGPI_TMLF_TXTHRES	0xBC
++#define HGPI_ASEQ_LEN		0x40
++
++#endif /* _GPI_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/gpt.h b/drivers/net/pfe_eth/pfe/cbus/gpt.h
+new file mode 100644
+index 0000000..f8c114b
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/gpt.h
+@@ -0,0 +1,11 @@
++#ifndef _CBUS_GPT_H_
++#define _CBUS_GPT_H_
++
++#define CBUS_GPT_VERSION	 (CBUS_GPT_BASE_ADDR + 0x00)
++#define CBUS_GPT_STATUS		 (CBUS_GPT_BASE_ADDR + 0x04)
++#define CBUS_GPT_CONFIG		 (CBUS_GPT_BASE_ADDR + 0x08)
++#define CBUS_GPT_COUNTER	 (CBUS_GPT_BASE_ADDR + 0x0c)
++#define CBUS_GPT_PERIOD		 (CBUS_GPT_BASE_ADDR + 0x10)
++#define CBUS_GPT_WIDTH		 (CBUS_GPT_BASE_ADDR + 0x14)
++
++#endif /* _CBUS_GPT_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/hif.h b/drivers/net/pfe_eth/pfe/cbus/hif.h
+new file mode 100644
+index 0000000..a4dd7c2
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/hif.h
+@@ -0,0 +1,62 @@
++#ifndef _HIF_H_
++#define _HIF_H_
++
++/** @file hif.h.
++ * hif - PFE hif block control and status register. Mapped on CBUS and accessible from all PE's and ARM.
++ */
++#define HIF_VERSION		(HIF_BASE_ADDR + 0x00)
++#define HIF_TX_CTRL		(HIF_BASE_ADDR + 0x04)
++#define HIF_TX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x08)
++#define HIF_TX_ALLOC		(HIF_BASE_ADDR + 0x0c)
++#define HIF_TX_BDP_ADDR		(HIF_BASE_ADDR + 0x10)
++#define HIF_TX_STATUS		(HIF_BASE_ADDR + 0x14)
++#define HIF_RX_CTRL		(HIF_BASE_ADDR + 0x20)
++#define HIF_RX_BDP_ADDR		(HIF_BASE_ADDR + 0x24)
++#define HIF_RX_STATUS		(HIF_BASE_ADDR + 0x30)
++#define HIF_INT_SRC		(HIF_BASE_ADDR + 0x34)
++#define HIF_INT_ENABLE		(HIF_BASE_ADDR + 0x38)
++#define HIF_POLL_CTRL		(HIF_BASE_ADDR + 0x3c)
++#define HIF_RX_CURR_BD_ADDR	(HIF_BASE_ADDR + 0x40)
++#define HIF_RX_ALLOC		(HIF_BASE_ADDR + 0x44)
++#define HIF_TX_DMA_STATUS	(HIF_BASE_ADDR + 0x48)
++#define HIF_RX_DMA_STATUS	(HIF_BASE_ADDR + 0x4c)
++#define HIF_INT_COAL		(HIF_BASE_ADDR + 0x50)
++
++/*HIF_INT_SRC/ HIF_INT_ENABLE control bits */
++#define HIF_INT        		(1 << 0)
++#define HIF_RXBD_INT   		(1 << 1)
++#define HIF_RXPKT_INT  		(1 << 2)
++#define HIF_TXBD_INT   		(1 << 3)
++#define HIF_TXPKT_INT  		(1 << 4)
++
++/*HIF_TX_CTRL bits */
++#define HIF_CTRL_DMA_EN			(1<<0)
++#define HIF_CTRL_BDP_POLL_CTRL_EN	(1<<1)
++#define HIF_CTRL_BDP_CH_START_WSTB	(1<<2)
++
++/*HIF_INT_ENABLE bits */
++#define HIF_INT_EN		(1 << 0)
++#define HIF_RXBD_INT_EN		(1 << 1)
++#define HIF_RXPKT_INT_EN	(1 << 2)
++#define HIF_TXBD_INT_EN		(1 << 3)
++#define HIF_TXPKT_INT_EN	(1 << 4)
++
++/*HIF_POLL_CTRL bits*/
++#define HIF_RX_POLL_CTRL_CYCLE	0x0400
++#define HIF_TX_POLL_CTRL_CYCLE	0x0400
++
++/*Buffer descriptor control bits */
++#define BD_CTRL_BUFLEN_MASK	(0xffff)
++#define BD_BUF_LEN(x)		(x & BD_CTRL_BUFLEN_MASK)
++#define BD_CTRL_CBD_INT_EN	(1 << 16)
++#define BD_CTRL_PKT_INT_EN	(1 << 17)
++#define BD_CTRL_LIFM		(1 << 18)
++#define BD_CTRL_LAST_BD		(1 << 19)
++#define BD_CTRL_DIR		(1 << 20)
++#define BD_CTRL_PKT_XFER	(1 << 24)
++#define BD_CTRL_DESC_EN		(1 << 31)
++#define BD_CTRL_PARSE_DISABLE	(1 << 25)
++#define BD_CTRL_BRFETCH_DISABLE	(1 << 26)
++#define BD_CTRL_RTFETCH_DISABLE	(1 << 27)
++
++#endif /* _HIF_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/hif_nocpy.h b/drivers/net/pfe_eth/pfe/cbus/hif_nocpy.h
+new file mode 100644
+index 0000000..93cb946
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/hif_nocpy.h
+@@ -0,0 +1,33 @@
++#ifndef _HIF_NOCPY_H_
++#define _HIF_NOCPY_H_
++
++#define HIF_NOCPY_VERSION		(HIF_NOCPY_BASE_ADDR + 0x00)
++#define HIF_NOCPY_TX_CTRL		(HIF_NOCPY_BASE_ADDR + 0x04)
++#define HIF_NOCPY_TX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x08)
++#define HIF_NOCPY_TX_ALLOC		(HIF_NOCPY_BASE_ADDR + 0x0c)
++#define HIF_NOCPY_TX_BDP_ADDR		(HIF_NOCPY_BASE_ADDR + 0x10)
++#define HIF_NOCPY_TX_STATUS		(HIF_NOCPY_BASE_ADDR + 0x14)
++#define HIF_NOCPY_RX_CTRL		(HIF_NOCPY_BASE_ADDR + 0x20)
++#define HIF_NOCPY_RX_BDP_ADDR		(HIF_NOCPY_BASE_ADDR + 0x24)
++#define HIF_NOCPY_RX_STATUS		(HIF_NOCPY_BASE_ADDR + 0x30)
++#define HIF_NOCPY_INT_SRC		(HIF_NOCPY_BASE_ADDR + 0x34)
++#define HIF_NOCPY_INT_ENABLE		(HIF_NOCPY_BASE_ADDR + 0x38)
++#define HIF_NOCPY_POLL_CTRL		(HIF_NOCPY_BASE_ADDR + 0x3c)
++#define HIF_NOCPY_RX_CURR_BD_ADDR	(HIF_NOCPY_BASE_ADDR + 0x40)
++#define HIF_NOCPY_RX_ALLOC		(HIF_NOCPY_BASE_ADDR + 0x44)
++#define HIF_NOCPY_TX_DMA_STATUS		(HIF_NOCPY_BASE_ADDR + 0x48)
++#define HIF_NOCPY_RX_DMA_STATUS		(HIF_NOCPY_BASE_ADDR + 0x4c)
++#define HIF_NOCPY_RX_INQ0_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x50)
++#define HIF_NOCPY_RX_INQ1_PKTPTR	(HIF_NOCPY_BASE_ADDR + 0x54)
++#define HIF_NOCPY_TX_PORT_NO		(HIF_NOCPY_BASE_ADDR + 0x60)
++#define HIF_NOCPY_LMEM_ALLOC_ADDR	(HIF_NOCPY_BASE_ADDR + 0x64)
++#define HIF_NOCPY_CLASS_ADDR		(HIF_NOCPY_BASE_ADDR + 0x68)
++#define HIF_NOCPY_TMU_PORT0_ADDR	(HIF_NOCPY_BASE_ADDR + 0x70)
++#define HIF_NOCPY_TMU_PORT1_ADDR	(HIF_NOCPY_BASE_ADDR + 0x74)
++#define HIF_NOCPY_TMU_PORT2_ADDR	(HIF_NOCPY_BASE_ADDR + 0x7c)
++#define HIF_NOCPY_TMU_PORT3_ADDR	(HIF_NOCPY_BASE_ADDR + 0x80)
++#define HIF_NOCPY_TMU_PORT4_ADDR	(HIF_NOCPY_BASE_ADDR + 0x84)
++#define HIF_NOCPY_INT_COAL		(HIF_NOCPY_BASE_ADDR + 0x90)
++
++
++#endif /* _HIF_NOCPY_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h b/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
+new file mode 100644
+index 0000000..cbcbb1f
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/tmu_csr.h
+@@ -0,0 +1,102 @@
++#ifndef _TMU_CSR_H_
++#define _TMU_CSR_H_
++
++#define TMU_VERSION			(TMU_CSR_BASE_ADDR + 0x000)
++#define TMU_INQ_WATERMARK		(TMU_CSR_BASE_ADDR + 0x004)
++#define TMU_PHY_INQ_PKTPTR		(TMU_CSR_BASE_ADDR + 0x008)
++#define TMU_PHY_INQ_PKTINFO		(TMU_CSR_BASE_ADDR + 0x00c)
++#define TMU_PHY_INQ_FIFO_CNT		(TMU_CSR_BASE_ADDR + 0x010)
++#define TMU_SYS_GENERIC_CONTROL		(TMU_CSR_BASE_ADDR + 0x014)
++#define TMU_SYS_GENERIC_STATUS		(TMU_CSR_BASE_ADDR + 0x018)
++#define TMU_SYS_GEN_CON0		(TMU_CSR_BASE_ADDR + 0x01c)
++#define TMU_SYS_GEN_CON1		(TMU_CSR_BASE_ADDR + 0x020)
++#define TMU_SYS_GEN_CON2		(TMU_CSR_BASE_ADDR + 0x024)
++#define TMU_SYS_GEN_CON3		(TMU_CSR_BASE_ADDR + 0x028)
++#define TMU_SYS_GEN_CON4		(TMU_CSR_BASE_ADDR + 0x02c)
++#define TMU_TEQ_DISABLE_DROPCHK		(TMU_CSR_BASE_ADDR + 0x030)
++#define TMU_TEQ_CTRL			(TMU_CSR_BASE_ADDR + 0x034)
++#define TMU_TEQ_QCFG			(TMU_CSR_BASE_ADDR + 0x038)
++#define TMU_TEQ_DROP_STAT		(TMU_CSR_BASE_ADDR + 0x03c)
++#define TMU_TEQ_QAVG			(TMU_CSR_BASE_ADDR + 0x040)
++#define TMU_TEQ_WREG_PROB		(TMU_CSR_BASE_ADDR + 0x044)
++#define TMU_TEQ_TRANS_STAT		(TMU_CSR_BASE_ADDR + 0x048)
++#define TMU_TEQ_HW_PROB_CFG0		(TMU_CSR_BASE_ADDR + 0x04c)
++#define TMU_TEQ_HW_PROB_CFG1		(TMU_CSR_BASE_ADDR + 0x050)
++#define TMU_TEQ_HW_PROB_CFG2		(TMU_CSR_BASE_ADDR + 0x054)
++#define TMU_TEQ_HW_PROB_CFG3		(TMU_CSR_BASE_ADDR + 0x058)
++#define TMU_TEQ_HW_PROB_CFG4		(TMU_CSR_BASE_ADDR + 0x05c)
++#define TMU_TEQ_HW_PROB_CFG5		(TMU_CSR_BASE_ADDR + 0x060)
++#define TMU_TEQ_HW_PROB_CFG6		(TMU_CSR_BASE_ADDR + 0x064)
++#define TMU_TEQ_HW_PROB_CFG7		(TMU_CSR_BASE_ADDR + 0x068)
++#define TMU_TEQ_HW_PROB_CFG8		(TMU_CSR_BASE_ADDR + 0x06c)
++#define TMU_TEQ_HW_PROB_CFG9		(TMU_CSR_BASE_ADDR + 0x070)
++#define TMU_TEQ_HW_PROB_CFG10		(TMU_CSR_BASE_ADDR + 0x074)
++#define TMU_TEQ_HW_PROB_CFG11		(TMU_CSR_BASE_ADDR + 0x078)
++#define TMU_TEQ_HW_PROB_CFG12		(TMU_CSR_BASE_ADDR + 0x07c)
++#define TMU_TEQ_HW_PROB_CFG13		(TMU_CSR_BASE_ADDR + 0x080)
++#define TMU_TEQ_HW_PROB_CFG14		(TMU_CSR_BASE_ADDR + 0x084)
++#define TMU_TEQ_HW_PROB_CFG15		(TMU_CSR_BASE_ADDR + 0x088)
++#define TMU_TEQ_HW_PROB_CFG16		(TMU_CSR_BASE_ADDR + 0x08c)
++#define TMU_TEQ_HW_PROB_CFG17		(TMU_CSR_BASE_ADDR + 0x090)
++#define TMU_TEQ_HW_PROB_CFG18		(TMU_CSR_BASE_ADDR + 0x094)
++#define TMU_TEQ_HW_PROB_CFG19		(TMU_CSR_BASE_ADDR + 0x098)
++#define TMU_TEQ_HW_PROB_CFG20		(TMU_CSR_BASE_ADDR + 0x09c)
++#define TMU_TEQ_HW_PROB_CFG21		(TMU_CSR_BASE_ADDR + 0x0a0)
++#define TMU_TEQ_HW_PROB_CFG22		(TMU_CSR_BASE_ADDR + 0x0a4)
++#define TMU_TEQ_HW_PROB_CFG23		(TMU_CSR_BASE_ADDR + 0x0a8)
++#define TMU_TEQ_HW_PROB_CFG24		(TMU_CSR_BASE_ADDR + 0x0ac)
++#define TMU_TEQ_HW_PROB_CFG25		(TMU_CSR_BASE_ADDR + 0x0b0)
++#define TMU_TDQ_IIFG_CFG		(TMU_CSR_BASE_ADDR + 0x0b4)
++#define TMU_TDQ0_SCH_CTRL		(TMU_CSR_BASE_ADDR + 0x0b8)	/**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY0 */
++#define TMU_LLM_CTRL			(TMU_CSR_BASE_ADDR + 0x0bc)
++#define TMU_LLM_BASE_ADDR		(TMU_CSR_BASE_ADDR + 0x0c0)
++#define TMU_LLM_QUE_LEN			(TMU_CSR_BASE_ADDR + 0x0c4)
++#define TMU_LLM_QUE_HEADPTR		(TMU_CSR_BASE_ADDR + 0x0c8)
++#define TMU_LLM_QUE_TAILPTR		(TMU_CSR_BASE_ADDR + 0x0cc)
++#define TMU_LLM_QUE_DROPCNT		(TMU_CSR_BASE_ADDR + 0x0d0)
++#define TMU_INT_EN			(TMU_CSR_BASE_ADDR + 0x0d4)
++#define TMU_INT_SRC			(TMU_CSR_BASE_ADDR + 0x0d8)
++#define TMU_INQ_STAT			(TMU_CSR_BASE_ADDR + 0x0dc)
++#define TMU_CTRL			(TMU_CSR_BASE_ADDR + 0x0e0)
++
++#define TMU_MEM_ACCESS_ADDR		(TMU_CSR_BASE_ADDR + 0x0e4)	/**< [31] Mem Access Command. 0 = Internal Memory Read, 1 = Internal memory Write [27:24] Byte Enables of the Internal memory access [23:0] Address of the internal memory. This address is used to access both the PM and DM of all the PE's */
++#define TMU_MEM_ACCESS_WDATA		(TMU_CSR_BASE_ADDR + 0x0e8)	/**< Internal Memory Access Write Data */
++#define TMU_MEM_ACCESS_RDATA		(TMU_CSR_BASE_ADDR + 0x0ec)	/**< Internal Memory Access Read Data. The commands are blocked at the mem_access only */
++
++#define TMU_PHY0_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x0f0)	/**< [31:0] PHY0 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++#define TMU_PHY1_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x0f4)	/**< [31:0] PHY1 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++#define TMU_PHY2_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x0f8)	/**< [31:0] PHY2 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++#define TMU_PHY3_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x0fc)	/**< [31:0] PHY3 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++#define TMU_BMU_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x100)
++#define TMU_TX_CTRL			(TMU_CSR_BASE_ADDR + 0x104)
++
++#define TMU_BUS_ACCESS_WDATA		(TMU_CSR_BASE_ADDR + 0x108)
++#define TMU_BUS_ACCESS			(TMU_CSR_BASE_ADDR + 0x10c)
++#define TMU_BUS_ACCESS_RDATA		(TMU_CSR_BASE_ADDR + 0x110)
++
++#define TMU_PE_SYS_CLK_RATIO		(TMU_CSR_BASE_ADDR + 0x114)
++#define TMU_PE_STATUS			(TMU_CSR_BASE_ADDR + 0x118)
++#define TMU_TEQ_MAX_THRESHOLD		(TMU_CSR_BASE_ADDR + 0x11c)
++#define TMU_PHY4_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x134)	/**< [31:0] PHY4 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++#define TMU_TDQ1_SCH_CTRL		(TMU_CSR_BASE_ADDR + 0x138)	/**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY1 */
++#define TMU_TDQ2_SCH_CTRL		(TMU_CSR_BASE_ADDR + 0x13c)	/**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY2 */
++#define TMU_TDQ3_SCH_CTRL		(TMU_CSR_BASE_ADDR + 0x140)	/**< [9:0] Scheduler Enable for each of the scheduler in the TDQ. This is a global Enable for all schedulers in PHY3 */
++#define TMU_BMU_BUF_SIZE		(TMU_CSR_BASE_ADDR + 0x144)
++#define TMU_PHY5_INQ_ADDR		(TMU_CSR_BASE_ADDR + 0x148)	/**< [31:0] PHY5 in queue address (must be initialized with one of the xxx_INQ_PKTPTR cbus addresses) */
++
++#define SW_RESET	(1 << 0)	/**< Global software reset */
++#define INQ_RESET	(1 << 2)
++#define TEQ_RESET	(1 << 3)
++#define TDQ_RESET	(1 << 4)
++#define PE_RESET	(1 << 5)
++#define MEM_INIT	(1 << 6)
++#define MEM_INIT_DONE	(1 << 7)
++#define LLM_INIT	(1 << 8)
++#define LLM_INIT_DONE	(1 << 9)
++
++typedef struct {
++	u32 llm_base_addr;
++	u32 llm_queue_len;
++} TMU_CFG;
++
++#endif /* _TMU_CSR_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/cbus/util_csr.h b/drivers/net/pfe_eth/pfe/cbus/util_csr.h
+new file mode 100644
+index 0000000..d67e849
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/cbus/util_csr.h
+@@ -0,0 +1,43 @@
++#ifndef _UTIL_CSR_H_
++#define _UTIL_CSR_H_
++
++#define UTIL_VERSION			(UTIL_CSR_BASE_ADDR + 0x000)
++#define UTIL_TX_CTRL			(UTIL_CSR_BASE_ADDR + 0x004)
++#define UTIL_INQ_PKTPTR			(UTIL_CSR_BASE_ADDR + 0x010)
++
++#define UTIL_HDR_SIZE			(UTIL_CSR_BASE_ADDR + 0x014)
++
++#define UTIL_PE0_QB_DM_ADDR0		(UTIL_CSR_BASE_ADDR + 0x020)
++#define UTIL_PE0_QB_DM_ADDR1		(UTIL_CSR_BASE_ADDR + 0x024)
++#define UTIL_PE0_RO_DM_ADDR0		(UTIL_CSR_BASE_ADDR + 0x060)
++#define UTIL_PE0_RO_DM_ADDR1		(UTIL_CSR_BASE_ADDR + 0x064)
++
++#define UTIL_MEM_ACCESS_ADDR		(UTIL_CSR_BASE_ADDR + 0x100)
++#define UTIL_MEM_ACCESS_WDATA		(UTIL_CSR_BASE_ADDR + 0x104)
++#define UTIL_MEM_ACCESS_RDATA		(UTIL_CSR_BASE_ADDR + 0x108)
++
++#define UTIL_TM_INQ_ADDR		(UTIL_CSR_BASE_ADDR + 0x114)
++#define UTIL_PE_STATUS			(UTIL_CSR_BASE_ADDR + 0x118)
++
++#define UTIL_PE_SYS_CLK_RATIO		(UTIL_CSR_BASE_ADDR + 0x200)
++#define UTIL_AFULL_THRES		(UTIL_CSR_BASE_ADDR + 0x204)
++#define UTIL_GAP_BETWEEN_READS		(UTIL_CSR_BASE_ADDR + 0x208)
++#define UTIL_MAX_BUF_CNT		(UTIL_CSR_BASE_ADDR + 0x20c)
++#define UTIL_TSQ_FIFO_THRES		(UTIL_CSR_BASE_ADDR + 0x210)
++#define UTIL_TSQ_MAX_CNT		(UTIL_CSR_BASE_ADDR + 0x214)
++#define UTIL_IRAM_DATA_0		(UTIL_CSR_BASE_ADDR + 0x218)
++#define UTIL_IRAM_DATA_1		(UTIL_CSR_BASE_ADDR + 0x21c)
++#define UTIL_IRAM_DATA_2		(UTIL_CSR_BASE_ADDR + 0x220)
++#define UTIL_IRAM_DATA_3		(UTIL_CSR_BASE_ADDR + 0x224)
++
++#define UTIL_BUS_ACCESS_ADDR		(UTIL_CSR_BASE_ADDR + 0x228)
++#define UTIL_BUS_ACCESS_WDATA		(UTIL_CSR_BASE_ADDR + 0x22c)
++#define UTIL_BUS_ACCESS_RDATA		(UTIL_CSR_BASE_ADDR + 0x230)
++
++#define UTIL_INQ_AFULL_THRES		(UTIL_CSR_BASE_ADDR + 0x234)
++#define UTIL_MISC_REG			(UTIL_CSR_BASE_ADDR + 0x240)
++
++typedef struct {
++} UTIL_CFG;
++
++#endif /* _UTIL_CSR_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/class.h b/drivers/net/pfe_eth/pfe/class.h
+new file mode 100644
+index 0000000..33ad826
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class.h
+@@ -0,0 +1,142 @@
++#ifndef _CLASS_H_
++#define _CLASS_H_
++
++#define CLASS_DMEM_BASE_ADDR	0x00000000
++#define CLASS_DMEM_SIZE		0x2000
++#define CLASS_DMEM_END		(CLASS_DMEM_BASE_ADDR + CLASS_DMEM_SIZE)
++#define CLASS_PMEM_BASE_ADDR	0x00010000
++
++#define CBUS_BASE_ADDR		0xc0000000
++#define CLASS_APB_BASE_ADDR	0xc1000000
++#define CLASS_AHB1_BASE_ADDR	0xc2000000
++#define CLASS_AHB2_BASE_ADDR	0xc3000000
++
++#include "cbus.h"
++
++#define GPT_BASE_ADDR		(CLASS_APB_BASE_ADDR + 0x00000)
++#define UART_BASE_ADDR		(CLASS_APB_BASE_ADDR + 0x10000)
++#define PERG_BASE_ADDR		(CLASS_APB_BASE_ADDR + 0x20000)
++#define EFET_BASE_ADDR		(CLASS_APB_BASE_ADDR + 0x40000)
++
++#define MAC_HASH_BASE_ADDR	(CLASS_AHB1_BASE_ADDR + 0x30000)
++#define VLAN_HASH_BASE_ADDR	(CLASS_AHB1_BASE_ADDR + 0x50000)
++
++#define PE_LMEM_BASE_ADDR	(CLASS_AHB2_BASE_ADDR + 0x10000)
++#define PE_LMEM_SIZE		0x8000
++#define PE_LMEM_END		(PE_LMEM_BASE_ADDR + PE_LMEM_SIZE)
++#define CCU_BASE_ADDR		(CLASS_AHB2_BASE_ADDR + 0x20000)
++
++#define IS_DMEM(addr, len)	(((unsigned long)(addr) >= CLASS_DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= CLASS_DMEM_END))
++#define IS_PE_LMEM(addr, len)	(((unsigned long)(addr) >= PE_LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PE_LMEM_END))
++
++
++#include "gpt.h"
++#include "uart.h"
++#include "class/perg.h"
++#include "class/efet.h"
++#include "class/mac_hash.h"
++#include "class/vlan_hash.h"
++#include "class/ccu.h"
++
++
++#define CLASS_MAX_PBUFFERS	4
++
++#define PBUF_HWPARSE_OFFSET	0x10	/* Fixed by hardware */
++
++#define PAYLOAD_DMEM_MAX_SIZE	(CLASS_PBUF_SIZE - CLASS_PBUF_HEADER_OFFSET - sizeof(class_rx_hdr_t))
++
++#define PHYPORT_0               0x0
++#define PHYPORT_1               0x1
++#define HOST_PORT_NO		0x3
++
++#define   ACT_SRC_MAC_REPLACE 	(1 << (4+0))
++#define   ACT_VLAN_REPLACE		(1 << (4+3))
++#define   ACT_TCPCHKSUM_REPLACE	(1 << (4+2))
++#define   ACT_VLAN_ADD			(1 << (4+1))
++
++#define MIN_PKT_SIZE		56
++
++#define PARSE_ETH_TYPE		(1 << 0)
++#define PARSE_VLAN_TYPE		(1 << 1)
++#define PARSE_PPPOE_TYPE	(1 << 2)
++#define PARSE_ARP_TYPE		(1 << 3)
++#define PARSE_MCAST_TYPE	(1 << 4)
++#define PARSE_IP_TYPE		(1 << 5)
++#define PARSE_IPV6_TYPE		(1 << 6)
++#define PARSE_IPV4_TYPE		(1 << 7)
++
++#define PARSE_IPX_TYPE		(1 << 9)
++
++#define PARSE_UDP_FLOW		(1 << 11)
++#define PARSE_TCP_FLOW		(1 << 12)
++#define PARSE_ICMP_FLOW		(1 << 13)
++#define PARSE_IGMP_FLOW		(1 << 14)
++#define PARSE_FRAG_FLOW		(1 << 15)
++
++#define PARSE_HIF_PKT		(1 << 23)
++#define PARSE_ARC_HIT		(1 << 24)
++#define PARSE_PKT_OVERFLOW	(1 << 25)
++
++#define PARSE_PROTO_MISMATCH	(1 << 28)
++#define PARSE_L3_MISMATCH	(1 << 29)
++#define PARSE_L2_MISMATCH	(1 << 30)
++#define PARSE_INCOMPLETE	(1 << 31)
++
++
++typedef struct _hwparse_t {
++	u16	sid;
++	u16	connid;
++	u8	toevec;
++	u8	pLayer2Hdr;
++	u8	pLayer3Hdr;
++	u8	pLayer4Hdr;
++	u16	vlanid;
++	u16	ifParseFlags;
++	u32	parseFlags;
++	u16	srcport;
++	u16	dstport;
++	u32	proto:8;
++	u32	port:4;
++	u32	hash:20;
++	u64	rte_res_valid:1;
++	u64	vlan_res_valid:1;
++	u64	dst_res_valid:1;
++	u64	src_res_valid:1;
++	u64	vlan_lookup:20;
++	u64	dst_lookup:20;
++	u64	src_lookup:20;
++} hwparse_t;
++
++
++typedef struct {
++	u32	next_ptr;	/* ptr to the start of the first DDR buffer */
++	u16	length;		/* total packet length */
++	u16	phyno;		/* input physical port number */
++	u32	status;		/* gemac status bits */
++	u32	res;		/* reserved for software usage */
++} class_rx_hdr_t;
++
++
++typedef struct {
++	u8	num_cpy;	/* no of copies to send out from RO block, for each there must be a corresponding tx pre-header */
++	u8	dma_len;	/* len to be DMAed to DDR mem, including all tx pre-headers */
++	u16	src_addr;	/* class dmem source address, pointing to first tx pre-header */
++	u32	dst_addr;	/* DDR memory destination address of first tx pre-header, must be so packet data is continuous in DDR */
++	u32	res1;		/* reserved for software usage - queue number? */
++	u16	res2;		/* reserved for software usage */
++	u16	tsv;		/* time stamp val */
++} class_tx_desc_t;
++
++
++typedef struct {
++	u8	start_data_off;		/* packet data start offset, relative to start of this tx pre-header */
++	u8	start_buf_off;		/* this tx pre-header start offset, relative to start of DDR buffer */
++	u16	pkt_length;		/* total packet lenght */
++	u8	act_phyno;		/* action phy number */
++	u8	queueno;		/* queueno */
++	u16	src_mac_msb;		/* indicates src_mac 47:32 */
++	u32	src_mac_lsb;		/* indicates src_mac 31:0 */
++	u32	vlanid;			/* vlanid */
++} class_tx_hdr_t;
++
++#endif /* _CLASS_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/class/ccu.h b/drivers/net/pfe_eth/pfe/class/ccu.h
+new file mode 100644
+index 0000000..2c43d97
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class/ccu.h
+@@ -0,0 +1,10 @@
++#ifndef _CCU_H_
++#define _CCU_H_
++
++#define CCU_ADDR	(CCU_BASE_ADDR + 0x00)
++#define CCU_CNT		(CCU_BASE_ADDR + 0x04)
++#define CCU_STATUS	(CCU_BASE_ADDR + 0x08)
++#define CCU_VAL		(CCU_BASE_ADDR + 0x0c)
++
++#endif /* _CCU_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/class/efet.h b/drivers/net/pfe_eth/pfe/class/efet.h
+new file mode 100644
+index 0000000..4f3cc25
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class/efet.h
+@@ -0,0 +1,21 @@
++#ifndef _CLASS_EFET_H_
++#define _CLASS_EFET_H_
++
++#define CLASS_EFET_ENTRY_ADDR		(EFET_BASE_ADDR + 0x00)
++#define CLASS_EFET_ENTRY_SIZE		(EFET_BASE_ADDR + 0x04)
++#define CLASS_EFET_ENTRY_DMEM_ADDR	(EFET_BASE_ADDR + 0x08)
++#define CLASS_EFET_ENTRY_STATUS		(EFET_BASE_ADDR + 0x0c)
++#define CLASS_EFET_ENTRY_ENDIAN		(EFET_BASE_ADDR + 0x10)
++
++#define CBUS2DMEM	0
++#define DMEM2CBUS	1
++
++#define EFET2BUS_LE     (1 << 0)
++#define PE2BUS_LE	(1 << 1)
++
++void class_efet(u32 cbus_addr, u32 dmem_addr, u32 len, u32 dir);
++void class_efet_wait(void);
++void class_efet_sync(u32 cbus_addr, u32 dmem_addr, u32 len, u32 dir);
++
++#endif /* _CLASS_EFET_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/class/mac_hash.h b/drivers/net/pfe_eth/pfe/class/mac_hash.h
+new file mode 100644
+index 0000000..68023b4
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class/mac_hash.h
+@@ -0,0 +1,28 @@
++#ifndef _MAC_HASH_H_
++#define _MAC_HASH_H_
++
++#define MAC_HASH_REQ1_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x000)
++#define MAC_HASH_REQ2_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x020)
++#define MAC_HASH_REQ3_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x040)
++#define MAC_HASH_REQ4_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x060)
++#define MAC_HASH_REQ5_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x080)
++#define MAC_HASH_REQ6_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x0a0)
++#define MAC_HASH_REQ7_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x0c0)
++#define MAC_HASH_REQ8_BASE_ADDR		(MAC_HASH_BASE_ADDR + 0x0e0)
++
++#define MAC_HASH_REQ_CMD(i)		(MAC_HASH_REQ##i##_BASE_ADDR + 0x000)
++#define MAC_HASH_REQ_MAC1_ADDR(i)	(MAC_HASH_REQ##i##_BASE_ADDR + 0x004)
++#define MAC_HASH_REQ_MAC2_ADDR(i)	(MAC_HASH_REQ##i##_BASE_ADDR + 0x008)
++#define MAC_HASH_REQ_MASK1_ADDR(i)	(MAC_HASH_REQ##i##_BASE_ADDR + 0x00c)
++#define MAC_HASH_REQ_MASK2_ADDR(i)	(MAC_HASH_REQ##i##_BASE_ADDR + 0x010)
++#define MAC_HASH_REQ_ENTRY(i)		(MAC_HASH_REQ##i##_BASE_ADDR + 0x014)
++#define MAC_HASH_REQ_STATUS(i)		(MAC_HASH_REQ##i##_BASE_ADDR + 0x018)
++#define MAC_HASH_REQ_ENTRY_MAYCH(i)	(MAC_HASH_REQ##i##_BASE_ADDR + 0x01c)
++
++
++#define MAC_HASH_FREELIST_PTR_HEAD	(MAC_HASH_BASE_ADDR + 0x100)
++#define MAC_HASH_FREELIST_PTR_TAIL	(MAC_HASH_BASE_ADDR + 0x104)
++#define MAC_HASH_FREELIST_ENTRIES_ADDR	(MAC_HASH_BASE_ADDR + 0x108)
++
++#endif /* _MAC_HASH_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/class/perg.h b/drivers/net/pfe_eth/pfe/class/perg.h
+new file mode 100644
+index 0000000..7297171
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class/perg.h
+@@ -0,0 +1,21 @@
++#ifndef _PERG_H_
++#define _PERG_H_
++
++#define PERG_QB_BUF_STATUS		(PERG_BASE_ADDR + 0x00)
++#define PERG_RO_BUF_STATUS		(PERG_BASE_ADDR + 0x04)
++#define PERG_CLR_QB_BUF_STATUS		(PERG_BASE_ADDR + 0x08)
++#define PERG_SET_RO_BUF_STATUS		(PERG_BASE_ADDR + 0x0c)
++#define PERG_CLR_RO_ERR_PKT		(PERG_BASE_ADDR + 0x10)
++#define PERG_CLR_BMU2_ERR_PKT		(PERG_BASE_ADDR + 0x14)
++
++#define PERG_ID				(PERG_BASE_ADDR + 0x18)
++#define PERG_TIMER1			(PERG_BASE_ADDR + 0x1c)
++#define PERG_TIMER2			(PERG_BASE_ADDR + 0x20)
++#define PERG_BUF1			(PERG_BASE_ADDR + 0x24)
++#define PERG_BUF2			(PERG_BASE_ADDR + 0x28)
++#define PERG_HOST_GP			(PERG_BASE_ADDR + 0x2c)
++#define PERG_PE_GP			(PERG_BASE_ADDR + 0x30)
++#define PERG_INT_ENABLE			(PERG_BASE_ADDR + 0x34)
++#define PERG_INT_SRC			(PERG_BASE_ADDR + 0x38)
++
++#endif /* _PERG_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/class/vlan_hash.h b/drivers/net/pfe_eth/pfe/class/vlan_hash.h
+new file mode 100644
+index 0000000..a54ac19
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/class/vlan_hash.h
+@@ -0,0 +1,28 @@
++#ifndef _VLAN_HASH_H_
++#define _VLAN_HASH_H_
++
++#define VLAN_HASH_REQ1_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x000)
++#define VLAN_HASH_REQ2_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x020)
++#define VLAN_HASH_REQ3_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x040)
++#define VLAN_HASH_REQ4_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x060)
++#define VLAN_HASH_REQ5_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x080)
++#define VLAN_HASH_REQ6_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x0a0)
++#define VLAN_HASH_REQ7_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x0c0)
++#define VLAN_HASH_REQ8_BASE_ADDR	(VLAN_HASH_BASE_ADDR + 0x0e0)
++
++#define VLAN_HASH_REQ_CMD(i)		(VLAN_HASH_REQ##i##_BASE_ADDR + 0x000)
++#define VLAN_HASH_REQ_MAC1_ADDR(i)	(VLAN_HASH_REQ##i##_BASE_ADDR + 0x004)
++#define VLAN_HASH_REQ_MAC2_ADDR(i)	(VLAN_HASH_REQ##i##_BASE_ADDR + 0x008)
++#define VLAN_HASH_REQ_MASK1_ADDR(i)	(VLAN_HASH_REQ##i##_BASE_ADDR + 0x00c)
++#define VLAN_HASH_REQ_MASK2_ADDR(i)	(VLAN_HASH_REQ##i##_BASE_ADDR + 0x010)
++#define VLAN_HASH_REQ_ENTRY(i)		(VLAN_HASH_REQ##i##_BASE_ADDR + 0x014)
++#define VLAN_HASH_REQ_STATUS(i)		(VLAN_HASH_REQ##i##_BASE_ADDR + 0x018)
++#define VLAN_HASH_REQ_ENTRY_MAYCH(i)	(VLAN_HASH_REQ##i##_BASE_ADDR + 0x01c)
++
++
++#define VLAN_HASH_FREELIST_PTR_HEAD	(VLAN_HASH_BASE_ADDR + 0x100)
++#define VLAN_HASH_FREELIST_PTR_TAIL	(VLAN_HASH_BASE_ADDR + 0x104)
++#define VLAN_HASH_FREELIST_ENTRIES_ADDR	(VLAN_HASH_BASE_ADDR + 0x108)
++
++#endif /* _VLAN_HASH_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/gpt.h b/drivers/net/pfe_eth/pfe/gpt.h
+new file mode 100644
+index 0000000..d820277
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/gpt.h
+@@ -0,0 +1,11 @@
++#ifndef _GPT_H_
++#define _GPT_H_
++
++#define GPT_VERSION		 (GPT_BASE_ADDR + 0x00)
++#define GPT_STATUS		 (GPT_BASE_ADDR + 0x04)
++#define GPT_CONFIG		 (GPT_BASE_ADDR + 0x08)
++#define GPT_COUNTER		 (GPT_BASE_ADDR + 0x0c)
++#define GPT_PERIOD		 (GPT_BASE_ADDR + 0x10)
++#define GPT_WIDTH		 (GPT_BASE_ADDR + 0x14)
++
++#endif /* _GPT_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/pe.h b/drivers/net/pfe_eth/pfe/pe.h
+new file mode 100644
+index 0000000..a3838f5
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/pe.h
+@@ -0,0 +1,147 @@
++#ifndef _PE_H_
++#define _PE_H_
++
++#include "hal.h"
++
++#define DDR_BASE_ADDR		0x00020000
++#define DDR_END			0x86000000 /* This includes ACP and IRAM areas */
++#define IRAM_BASE_ADDR		0x83000000
++
++#define IS_DDR(addr, len)	(((unsigned long)(addr) >= DDR_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= DDR_END))
++
++typedef struct {
++
++} ddr_rx_hdr_t;
++
++typedef struct {
++
++} lmem_rx_hdr_t;
++
++
++typedef struct {
++
++} tmu_rx_hdr_t;
++
++typedef struct {
++
++} tmu_tx_hdr_t;
++
++typedef struct {
++
++} util_rx_hdr_t;
++
++
++struct pe_sync_mailbox
++{
++	u32 stop;
++	u32 stopped;
++};
++
++struct pe_msg_mailbox
++{
++	u32 dst;
++	u32 src;
++	u32 len;
++	u32 request;
++};
++
++/** Basic busy loop delay function
++*
++* @param cycles		Number of cycles to delay (actual cpu cycles should be close to 3 x cycles)
++*
++*/
++static inline void delay(u32 cycles)
++{
++	volatile int i;
++
++	for (i = 0; i < cycles; i++);
++}
++
++
++/** Read PE id
++*
++* @return	PE id (0 - 5 for CLASS-PE's, 6 - 9 for TMU-PE's, 10 for UTIL-PE)
++*
++*/
++static inline u32 esi_get_mpid(void)
++{
++	u32 mpid;
++
++	asm ("rcsr %0, Configuration, MPID" : "=d" (mpid));
++
++	return mpid;
++}
++
++/** 64bit aligned memory copy using efet.
++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR.
++* Source, destination addresses and len must all be 64bit aligned.
++* Uses efet synchronous interface to copy the data.
++*
++* @param dst	Destination address to write to (must be 64bit aligned)
++* @param src	Source address to read from (must be 64bit aligned)
++* @param len	Number of bytes to copy (must be 64bit aligned)
++*
++*/
++void efet_memcpy64(void *dst, void *src, unsigned int len);
++
++
++/** Aligned memory copy using efet.
++* Either the source or destination address must be in DMEM, the other address can be in LMEM or DDR.
++* Both the source and destination must have the same 64bit alignment, there is no restriction on length.
++*
++* @param dst	Destination address to write to (must have the same 64bit alignment as src)
++* @param src	Source address to read from (must have the same 64bit alignment as dst)
++* @param len	Number of bytes to copy
++*
++*/
++void efet_memcpy(void *dst, void *src, unsigned int len);
++
++
++/** 32bit aligned memory copy.
++* Source and destination addresses must be 32bit aligned, there is no restriction on the length.
++*
++* @param dst		Destination address (must be 32bit aligned)
++* @param src		Source address (must be 32bit aligned)
++* @param len		Number of bytes to copy
++*
++*/
++void memcpy_aligned32(void *dst, void *src, unsigned int len);
++
++/** Aligned memory copy.
++* Source and destination addresses must have the same alignment
++* relative to 32bit boundaries (but otherwsie may have any alignment),
++* there is no restriction on the length.
++*
++* @param dst		Destination address
++* @param src		Source address (must have same 32bit alignment as dst)
++* @param len		Number of bytes to copy
++*
++*/
++void memcpy_aligned(void *dst, void *src, unsigned int len);
++
++
++/** Generic memory set.
++* Implements a generic memory set. Not very optimal (uses byte writes for the entire range)
++*
++*
++* @param dst		Destination address
++* @param val		Value to set memory to
++* @param len		Number of bytes to set
++*
++*/
++void memset(void *dst, u8 val, unsigned int len);
++
++/** Generic memory copy.
++* Implements generic memory copy. If source and destination have the same
++* alignment memcpy_aligned() is used, otherwise, we first align the destination
++* to a 32bit boundary (using byte copies) then the src, and finally use a loop
++* of read, shift, write
++*
++* @param dst		Destination address
++* @param src		Source address
++* @param len		Number of bytes to copy
++*
++*/
++void memcpy(void *dst, void *src, unsigned int len);
++
++#endif /* _PE_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/pfe.h b/drivers/net/pfe_eth/pfe/pfe.h
+new file mode 100644
+index 0000000..e8e2221
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/pfe.h
+@@ -0,0 +1,250 @@
++#ifndef _PFE_H_
++#define _PFE_H_
++
++#define CLASS_DMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20))
++#define CLASS_IMEM_BASE_ADDR(i)	(0x00000000 | ((i) << 20)) /* Only valid for mem access register interface */
++#define CLASS_DMEM_SIZE		0x00002000
++#define CLASS_IMEM_SIZE		0x00008000
++
++#define TMU_DMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20))
++#define TMU_IMEM_BASE_ADDR(i)	(0x00000000 + ((i) << 20)) /* Only valid for mem access register interface */
++#define TMU_DMEM_SIZE		0x00000800
++#define TMU_IMEM_SIZE		0x00002000
++
++#define UTIL_DMEM_BASE_ADDR	0x00000000
++#define UTIL_DMEM_SIZE		0x00002000
++
++#define PE_LMEM_BASE_ADDR	0xc3010000
++#define PE_LMEM_SIZE		0x8000
++#define PE_LMEM_END		(PE_LMEM_BASE_ADDR + PE_LMEM_SIZE)
++
++#define DMEM_BASE_ADDR		0x00000000
++#define DMEM_SIZE		0x2000		/**< TMU has less... */
++#define DMEM_END		(DMEM_BASE_ADDR + DMEM_SIZE)
++
++#define PMEM_BASE_ADDR		0x00010000
++#define PMEM_SIZE		0x8000		/**< TMU has less... */
++#define PMEM_END		(PMEM_BASE_ADDR + PMEM_SIZE)
++
++
++/* Memory ranges check from PE point of view/memory map */
++#define IS_DMEM(addr, len)	(((unsigned long)(addr) >= DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= DMEM_END))
++#define IS_PMEM(addr, len)	(((unsigned long)(addr) >= PMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PMEM_END))
++#define IS_PE_LMEM(addr, len)	(((unsigned long)(addr) >= PE_LMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PE_LMEM_END))
++
++#define IS_PFE_LMEM(addr, len)	(((unsigned long)(addr) >= CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR)) && (((unsigned long)(addr) + (len)) <= CBUS_VIRT_TO_PFE(LMEM_END)))
++#define IS_PHYS_DDR(addr, len)	(((unsigned long)(addr) >= PFE_DDR_PHYS_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= PFE_DDR_PHYS_END))
++
++/* Host View Address */
++extern void *cbus_base_addr;
++extern void *ddr_base_addr;
++#define CBUS_BASE_ADDR		cbus_base_addr
++#define DDR_BASE_ADDR		ddr_base_addr
++
++/* PFE View Address */
++#define PFE_DDR_PHYS_BASE_ADDR	0x03800000      /**< DDR physical base address as seen by PE's. */
++#define PFE_DDR_PHYS_SIZE	0xC000000
++#define PFE_DDR_PHYS_END	(PFE_DDR_PHYS_BASE_ADDR + PFE_DDR_PHYS_SIZE)
++#define PFE_CBUS_PHYS_BASE_ADDR	0xc0000000	/**< CBUS physical base address as seen by PE's. */
++
++/* Host<->PFE Mapping */
++#define DDR_PFE_TO_VIRT(p)	((p ) + 0x80000000)
++#define CBUS_VIRT_TO_PFE(v)	(((v) - CBUS_BASE_ADDR) + PFE_CBUS_PHYS_BASE_ADDR)
++#define CBUS_PFE_TO_VIRT(p)	(((p) - PFE_CBUS_PHYS_BASE_ADDR) + CBUS_BASE_ADDR)
++
++#include "cbus.h"
++
++enum {
++	CLASS0_ID = 0,
++	CLASS1_ID,
++	CLASS2_ID,
++	CLASS3_ID,
++#if !defined(CONFIG_PLATFORM_PCI)
++	CLASS4_ID,
++	CLASS5_ID,
++#endif
++#if !defined(CONFIG_TMU_DUMMY)
++	TMU0_ID,
++	TMU1_ID,
++	TMU2_ID,
++	TMU3_ID,
++#else
++	TMU0_ID,
++#endif
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	UTIL_ID,
++#endif
++	MAX_PE
++};
++
++#if !defined(CONFIG_PLATFORM_PCI)
++#define CLASS_MASK	((1 << CLASS0_ID) | (1 << CLASS1_ID) | (1 << CLASS2_ID) | (1 << CLASS3_ID) | (1 << CLASS4_ID) | (1 << CLASS5_ID))
++#define CLASS_MAX_ID	CLASS5_ID
++#else
++#define CLASS_MASK      ((1 << CLASS0_ID) | (1 << CLASS1_ID) | (1 << CLASS2_ID) | (1 << CLASS3_ID))
++#define CLASS_MAX_ID	CLASS3_ID
++#endif
++
++#if !defined(CONFIG_TMU_DUMMY)
++#if defined(CONFIG_LS1012A)
++#define TMU_MASK	((1 << TMU0_ID) | (1 << TMU1_ID) | (1 << TMU3_ID))
++#else
++#define TMU_MASK	((1 << TMU0_ID) | (1 << TMU1_ID) | (1 << TMU2_ID) | (1 << TMU3_ID))
++#endif
++#define TMU_MAX_ID	TMU3_ID
++#else
++#define TMU_MASK	(1 << TMU0_ID) 
++#define TMU_MAX_ID	TMU0_ID
++#endif
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++#define UTIL_MASK	(1 << UTIL_ID)
++#endif
++
++struct pe_sync_mailbox
++{
++	u32 stop;
++	u32 stopped;
++};
++
++struct pe_msg_mailbox
++{
++	u32 dst;
++	u32 src;
++	u32 len;
++	u32 request;
++};
++
++/** PE information.
++ * Structure containing PE's specific information. It is used to create
++ * generic C functions common to all PE's.
++ * Before using the library functions this structure needs to be initialized with the different registers virtual addresses
++ * (according to the ARM MMU mmaping). The default initialization supports a virtual == physical mapping.
++ *
++ */
++struct pe_info
++{
++	u32 dmem_base_addr;		/**< PE's dmem base address */
++	u32 pmem_base_addr;		/**< PE's pmem base address */
++	u32 pmem_size;			/**< PE's pmem size */
++
++	void *mem_access_wdata;		/**< PE's _MEM_ACCESS_WDATA register address */
++	void *mem_access_addr;		/**< PE's _MEM_ACCESS_ADDR register address */
++	void *mem_access_rdata;		/**< PE's _MEM_ACCESS_RDATA register address */
++};
++
++
++void pe_lmem_read(u32 *dst, u32 len, u32 offset);
++void pe_lmem_write(u32 *src, u32 len, u32 offset);
++
++void pe_dmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
++void pe_pmem_memcpy_to32(int id, u32 dst, const void *src, unsigned int len);
++
++u32 pe_pmem_read(int id, u32 addr, u8 size);
++
++void pe_dmem_write(int id, u32 val, u32 addr, u8 size);
++u32 pe_dmem_read(int id, u32 addr, u8 size);
++void class_bus_write(u32 val, u32 addr, u8 size);
++u32 class_bus_read(u32 addr, u8 size);
++void util_bus_write(u32 val, u32 addr, u8 size);
++u32 util_bus_read(u32 addr, u8 size);
++
++#define class_bus_readl(addr)			class_bus_read(addr, 4)
++#define class_bus_readw(addr)			class_bus_read(addr, 2)
++#define class_bus_readb(addr)			class_bus_read(addr, 1)
++
++#define class_bus_writel(val, addr)		class_bus_write(val, addr, 4)
++#define class_bus_writew(val, addr)		class_bus_write(val, addr, 2)
++#define class_bus_writeb(val, addr)		class_bus_write(val, addr, 1)
++
++#define pe_mem_readl(id, addr)			pe_mem_read(id, addr, 4)
++#define pe_mem_readw(id, addr)			pe_mem_read(id, addr, 2)
++#define pe_mem_readb(id, addr)			pe_mem_read(id, addr, 1)
++
++#define pe_mem_writel(id, val, addr)		pe_mem_write(id, val, addr, 4)
++#define pe_mem_writew(id, val, addr)		pe_mem_write(id, val, addr, 2)
++#define pe_mem_writeb(id, val, addr)		pe_mem_write(id, val, addr, 1)
++
++int pe_load_elf_section(int id, const void *data, Elf32_Shdr *shdr);
++
++void pfe_lib_init(void *cbus_base, void *ddr_base, unsigned long ddr_phys_base);
++void bmu_init(void *base, BMU_CFG *cfg);
++void bmu_reset(void *base);
++void bmu_enable(void *base);
++void bmu_disable(void *base);
++void bmu_set_config(void *base, BMU_CFG *cfg);
++
++#if 0
++void gemac_init(void *base, void *config);
++void gemac_set_speed(void *base, MAC_SPEED gem_speed);
++void gemac_set_duplex(void *base, int duplex);
++void gemac_set_mode(void *base, int mode);
++void gemac_enable_mdio(void *base);
++void gemac_disable_mdio(void *base);
++void gemac_set_mdc_div(void *base, MAC_MDC_DIV gem_mdcdiv);
++void gemac_enable(void *base);
++void gemac_disable(void *base);
++void gemac_enable_mdio(void *base);
++void gemac_disable_mdio(void *base);
++void gemac_reset(void *base);
++void gemac_set_address(void *base, SPEC_ADDR *addr);
++SPEC_ADDR gemac_get_address(void *base);
++void gemac_set_laddr1(void *base, MAC_ADDR *address);
++void gemac_set_laddr2(void *base, MAC_ADDR *address);
++void gemac_set_laddr3(void *base, MAC_ADDR *address);
++void gemac_set_laddr4(void *base, MAC_ADDR *address);
++void gemac_set_laddrN(void *base, MAC_ADDR *address, unsigned int entry_index);
++MAC_ADDR gem_get_laddr1(void *base);
++MAC_ADDR gem_get_laddr2(void *base);
++MAC_ADDR gem_get_laddr3(void *base);
++MAC_ADDR gem_get_laddr4(void *base);
++MAC_ADDR gem_get_laddrN(void *base, unsigned int entry_index);
++void gemac_set_config(void *base, GEMAC_CFG *cfg);
++void gemac_enable_copy_all(void *base);
++void gemac_disable_copy_all(void *base);
++void gemac_allow_broadcast(void *base);
++void gemac_no_broadcast(void *base);
++void gemac_enable_unicast(void *base);
++void gemac_disable_unicast(void *base);
++void gemac_enable_multicast(void *base);
++void gemac_disable_multicast(void *base);
++void gemac_enable_fcs_rx(void *base);
++void gemac_disable_fcs_rx(void *base);
++void gemac_enable_1536_rx(void *base);
++void gemac_disable_1536_rx(void *base);
++void gemac_enable_pause_rx(void *base);
++void gemac_disable_pause_rx(void *base);
++void gemac_enable_rx_checksum_offload(void *base);
++void gemac_disable_rx_checksum_offload(void *base);
++unsigned int * gemac_get_stats(void *base);
++void gemac_set_bus_width(void *base, int width);
++#endif
++
++void gpi_init(void *base, GPI_CFG *cfg);
++void gpi_reset(void *base);
++void gpi_enable(void *base);
++void gpi_disable(void *base);
++void gpi_set_config(void *base, GPI_CFG *cfg);
++
++void class_init(CLASS_CFG *cfg);
++void class_reset(void);
++void class_enable(void);
++void class_disable(void);
++void class_set_config(CLASS_CFG *cfg);
++
++void tmu_init(TMU_CFG *cfg);
++void tmu_enable(u32 pe_mask);
++void tmu_disable(u32 pe_mask);
++
++void util_init(UTIL_CFG *cfg);
++void util_reset(void);
++void util_enable(void);
++void util_disable(void);
++
++void hif_init(void);
++void hif_tx_enable(void);
++void hif_tx_disable(void);
++void hif_rx_enable(void);
++void hif_rx_disable(void);
++
++#endif /* _PFE_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/tmu.h b/drivers/net/pfe_eth/pfe/tmu.h
+new file mode 100644
+index 0000000..12eaf12
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/tmu.h
+@@ -0,0 +1,48 @@
++#ifndef _TMU_H_
++#define _TMU_H_
++
++#define TMU_DMEM_BASE_ADDR	0x00000000
++#define TMU_PMEM_BASE_ADDR	0x00010000
++
++
++#define CBUS_BASE_ADDR		0xc0000000
++#define TMU_APB_BASE_ADDR	0xc1000000
++
++#include "cbus.h"
++
++#define GPT_BASE_ADDR		(TMU_APB_BASE_ADDR + 0x00000)
++#define UART_BASE_ADDR		(TMU_APB_BASE_ADDR + 0x10000)
++
++
++#define SHAPER0_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x020000)
++#define SHAPER1_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x030000)
++#define SHAPER2_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x040000)
++#define SHAPER3_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x050000)
++#define SHAPER4_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x060000)
++#define SHAPER5_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x070000)
++#define SHAPER6_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x080000)
++#define SHAPER7_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x090000)
++#define SHAPER8_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x0a0000)
++#define SHAPER9_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x0b0000)
++
++#define SCHED0_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x1c0000)
++#define SCHED1_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x1d0000)
++#define SCHED2_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x1e0000)
++#define SCHED3_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x1f0000)
++#define SCHED4_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x200000)
++#define SCHED5_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x210000)
++#define SCHED6_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x220000)
++#define SCHED7_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x230000)
++
++
++#define PHY_QUEUE_BASE_ADDR	(TMU_APB_BASE_ADDR + 0x260000)
++#define SHAPER_STATUS		(TMU_APB_BASE_ADDR + 0x270000) /**< [9:0] bitmask of shapers that have positive credit */
++
++
++#include "gpt.h"
++#include "uart.h"
++#include "tmu/shaper.h"
++#include "tmu/sched.h"
++#include "tmu/phy_queue.h"
++
++#endif /* _TMU_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/tmu/phy_queue.h b/drivers/net/pfe_eth/pfe/tmu/phy_queue.h
+new file mode 100644
+index 0000000..9eef9a9
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/tmu/phy_queue.h
+@@ -0,0 +1,31 @@
++#ifndef _PHY_QUEUE_H_
++#define _PHY_QUEUE_H_
++
++#define PHY_QUEUE_SHAPER_STATUS	(PHY_QUEUE_BASE_ADDR + 0x00)	/**< [28:19] same as SHAPER_STATUS, [18:3] same as QUEUE_STATUS, [2:0] must be zero before a new packet may be dequeued */
++#define QUEUE_STATUS		(PHY_QUEUE_BASE_ADDR + 0x04)	/**< [15:0] bit mask of input queues with pending packets */
++
++#define QUEUE0_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x08)
++#define QUEUE1_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x0c)
++#define QUEUE2_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x10)
++#define QUEUE3_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x14)
++#define QUEUE4_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x18)
++#define QUEUE5_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x1c)
++#define QUEUE6_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x20)
++#define QUEUE7_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x24)
++#define QUEUE8_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x28)
++#define QUEUE9_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x2c)
++#define QUEUE10_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x30)
++#define QUEUE11_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x34)
++#define QUEUE12_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x38)
++#define QUEUE13_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x3c)
++#define QUEUE14_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x40)
++#define QUEUE15_PKT_LEN		(PHY_QUEUE_BASE_ADDR + 0x44)
++#define QUEUE_RESULT0		(PHY_QUEUE_BASE_ADDR + 0x48)	/**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY3), [6:0] winner input queue number */
++#define QUEUE_RESULT1		(PHY_QUEUE_BASE_ADDR + 0x4c)	/**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY4), [6:0] winner input queue number */
++#define QUEUE_RESULT2		(PHY_QUEUE_BASE_ADDR + 0x50)	/**< [7] set to one to indicate output PHY (TMU0->PHY0, TMU1->PHY1, TMU2->PHY2, TMU3->PHY5), [6:0] winner input queue number */
++#define QUEUE_GBL_PKTLEN	(PHY_QUEUE_BASE_ADDR + 0x5c)
++#define QUEUE_GBL_PKTLEN_MASK	(PHY_QUEUE_BASE_ADDR + 0x60)
++
++
++
++#endif /* _PHY_QUEUE_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/tmu/sched.h b/drivers/net/pfe_eth/pfe/tmu/sched.h
+new file mode 100644
+index 0000000..0c741cc
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/tmu/sched.h
+@@ -0,0 +1,47 @@
++#ifndef _SCHED_H_
++#define _SCHED_H_
++
++/* Offsets from SCHEDx_BASE_ADDR */
++#define SCHED_CTRL			0x00
++#define SCHED_SLOT_TIME			0x04
++#define SCHED_RES			0x08
++#define SCHED_QUEUE_ALLOC0		0x0c
++#define SCHED_QUEUE_ALLOC1		0x10
++#define SCHED_BW			0x14
++#define SCHED_GUR_DEF_CTR		0x18
++#define SCHED_AVL_CTR			0x1c
++#define SCHED_QU0_WGHT			0x20
++#define SCHED_QU1_WGHT			0x24
++#define SCHED_QU2_WGHT			0x28
++#define SCHED_QU3_WGHT			0x2c
++#define SCHED_QU4_WGHT			0x30
++#define SCHED_QU5_WGHT			0x34
++#define SCHED_QU6_WGHT			0x38
++#define SCHED_QU7_WGHT			0x3c
++#define SCHED_QUE0_DEFICIT_CNT		0x40
++#define SCHED_QUE1_DEFICIT_CNT		0x44
++#define SCHED_QUE2_DEFICIT_CNT		0x48
++#define SCHED_QUE3_DEFICIT_CNT		0x4c
++#define SCHED_QUE4_DEFICIT_CNT		0x50
++#define SCHED_QUE5_DEFICIT_CNT		0x54
++#define SCHED_QUE6_DEFICIT_CNT		0x58
++#define SCHED_QUE7_DEFICIT_CNT		0x5c
++#define SCHED_PKT_LEN			0x60
++
++#define SCHED_CTRL_ALGOTYPE(x) 		(((x) & 0xf) << 0)
++#define SCHED_CTRL_CALQUOTA(x) 		(((x) & 0x1) << 4)
++#define SCHED_CTRL_ACTIVE_Q(x) 		(((x) & 0xff) << 8)
++#define SCHED_CTRL_SHARE_BW(x) 		(((x) & 0xff) << 16)
++#define SCHED_CTRL_BARROW_BW(x) 	(((x) & 0xff) << 24)
++
++#define SCHED_QUEUE_ALLOC0_QUEUEA(x)	(((x) & 0x1f) << 0)
++#define SCHED_QUEUE_ALLOC0_QUEUEB(x)	(((x) & 0x1f) << 8)
++#define SCHED_QUEUE_ALLOC0_QUEUEC(x)	(((x) & 0x1f) << 16)
++#define SCHED_QUEUE_ALLOC0_QUEUED(x)	(((x) & 0x1f) << 24)
++
++#define SCHED_QUEUE_ALLOC0_RES0(x)	(((x) & 0x7) << 5)
++#define SCHED_QUEUE_ALLOC0_RES1(x)	(((x) & 0x7) << 13)
++#define SCHED_QUEUE_ALLOC0_RES2(x)	(((x) & 0x7) << 21)
++#define SCHED_QUEUE_ALLOC0_RES3(x)	(((x) & 0x7) << 29)
++
++#endif /* _SCHED_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/tmu/shaper.h b/drivers/net/pfe_eth/pfe/tmu/shaper.h
+new file mode 100644
+index 0000000..76315f3
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/tmu/shaper.h
+@@ -0,0 +1,19 @@
++#ifndef _SHAPER_H_
++#define _SHAPER_H_
++
++/* Offsets from SHAPPERx_BASE_ADDR */
++#define SHAPER_CTRL		0x00
++#define SHAPER_WEIGHT		0x04
++#define SHAPER_PKT_LEN		0x08
++
++#define SHAPER_CTRL_ENABLE(x) 	(((x) & 0x1) << 0)
++#define SHAPER_CTRL_QNO(x) 	(((x) & 0x3f) << 1)
++#define SHAPER_CTRL_CLKDIV(x) 	(((x) & 0xffff) << 16)
++
++#define SHAPER_WEIGHT_FRACWT(x) 	(((x) & 0xff) << 0)
++#define SHAPER_WEIGHT_INTWT(x) 		(((x) & 0x3) << 8)
++#define SHAPER_WEIGHT_MAXCREDIT(x) 	(((x) & 0x3fffff) << 10)
++
++#define PORT_SHAPER_MASK (1 << 0)
++
++#endif /* _SHAPER_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/uart.h b/drivers/net/pfe_eth/pfe/uart.h
+new file mode 100644
+index 0000000..483d446
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/uart.h
+@@ -0,0 +1,13 @@
++#ifndef _UART_H_
++#define _UART_H_
++
++#define UART_THR	(UART_BASE_ADDR + 0x00)
++#define UART_IER	(UART_BASE_ADDR + 0x04)
++#define UART_IIR	(UART_BASE_ADDR + 0x08)
++#define UART_LCR	(UART_BASE_ADDR + 0x0c)
++#define UART_MCR	(UART_BASE_ADDR + 0x10)
++#define UART_LSR	(UART_BASE_ADDR + 0x14)
++#define UART_MDR	(UART_BASE_ADDR + 0x18)
++#define UART_SCRATCH	(UART_BASE_ADDR + 0x1c)
++
++#endif /* _UART_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/util.h b/drivers/net/pfe_eth/pfe/util.h
+new file mode 100644
+index 0000000..fb2417c
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/util.h
+@@ -0,0 +1,30 @@
++#ifndef _UTIL_H_
++#define _UTIL_H_
++
++#define UTIL_DMEM_BASE_ADDR	0x00000000
++#define UTIL_DMEM_SIZE		0x00002000
++#define UTIL_DMEM_END		(UTIL_DMEM_BASE_ADDR + UTIL_DMEM_SIZE)
++
++#define IS_DMEM(addr, len)	(((unsigned long)(addr) >= UTIL_DMEM_BASE_ADDR) && (((unsigned long)(addr) + (len)) <= UTIL_DMEM_END))
++
++#define CBUS_BASE_ADDR		0xc0000000
++#define UTIL_APB_BASE_ADDR	0xc1000000
++
++#include "cbus.h"
++
++#define GPT_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x00000)
++#define UART_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x10000)
++#define EAPE_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x20000)
++#define INQ_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x30000)
++#define EFET1_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x40000)
++#define EFET2_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x50000)
++#define EFET3_BASE_ADDR		(UTIL_APB_BASE_ADDR + 0x60000)
++
++
++#include "gpt.h"
++#include "uart.h"
++#include "util/eape.h"
++#include "util/inq.h"
++#include "util/efet.h"
++
++#endif /* _UTIL_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/util/eape.h b/drivers/net/pfe_eth/pfe/util/eape.h
+new file mode 100644
+index 0000000..07344dc
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/util/eape.h
+@@ -0,0 +1,10 @@
++#ifndef _EAPE_H_
++#define _EAPE_H_
++
++#define EAPE_STATUS		(EAPE_BASE_ADDR + 0x0)
++#define EAPE_INT_ENABLE		(EAPE_BASE_ADDR + 0x4)
++#define EAPE_INT_SRC		(EAPE_BASE_ADDR + 0x8)
++#define EAPE_HOST_INT_ENABLE	(EAPE_BASE_ADDR + 0xc)
++
++
++#endif /* _EAPE_H_ */
+diff --git a/drivers/net/pfe_eth/pfe/util/efet.h b/drivers/net/pfe_eth/pfe/util/efet.h
+new file mode 100644
+index 0000000..12d0310
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/util/efet.h
+@@ -0,0 +1,20 @@
++#ifndef _UTIL_EFET_H_
++#define _UTIL_EFET_H_
++
++#define EFET_ENTRY_ADDR		0x00
++#define EFET_ENTRY_SIZE		0x04
++#define EFET_ENTRY_DMEM_ADDR	0x08
++#define EFET_ENTRY_STATUS	0x0c
++#define EFET_ENTRY_ENDIAN	0x10
++
++#define CBUS2DMEM	0
++#define DMEM2CBUS	1
++
++#define EFET2BUS_LE     (1 << 0)
++
++void util_efet(int i, u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir);
++void util_efet_wait(int i);
++void util_efet_sync(int i, u32 cbus_addr, u32 dmem_addr, u32 len, u8 dir);
++
++#endif /* _UTIL_EFET_H_ */
++
+diff --git a/drivers/net/pfe_eth/pfe/util/inq.h b/drivers/net/pfe_eth/pfe/util/inq.h
+new file mode 100644
+index 0000000..73d1acb
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe/util/inq.h
+@@ -0,0 +1,10 @@
++#ifndef _INQ_H_
++#define _INQ_H_
++
++#define INQ_HOST_GP	(INQ_BASE_ADDR + 0x00) /* FIXME what are these for ? */
++#define INQ_UPE_GP	(INQ_BASE_ADDR + 0x04) /* FIXME what are these for ? */
++
++#define INQ_QB_PKTPTR	(INQ_BASE_ADDR + 0x08)
++#define INQ_FIFO_CNT	(INQ_BASE_ADDR + 0x0c)
++
++#endif /* _INQ_H_ */
+diff --git a/drivers/net/pfe_eth/pfe_driver.c b/drivers/net/pfe_eth/pfe_driver.c
+new file mode 100644
+index 0000000..ca00e98
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_driver.c
+@@ -0,0 +1,710 @@
++/*
++ *  (C) Copyright 2011
++ *  Author : Mindspeed Technologes
++ *
++ *  See file CREDITS for list of people who contributed to this
++ *  project.
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License as
++ *  published by the Free Software Foundation; either version 2 of
++ *  the License, or (at your option) any later version.
++ *
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ *  MA 02111-1307 USA
++ * */
++
++
++#include "hal.h"
++#include "pfe/pfe.h"
++#include "pfe_driver.h"
++#include "pfe_firmware.h"
++
++
++static struct tx_desc_s *g_tx_desc = NULL;
++static struct rx_desc_s *g_rx_desc = NULL;
++
++#define wmb()	asm volatile("dsb st" : : : "memory")
++
++/** HIF Rx interface function
++ * Reads the rx descriptor from the current location (rxToRead).
++ * - If the descriptor has a valid data/pkt, then get the data pointer
++ * - check for the input rx phy number
++ * - increments the rx data pointer by pkt_head_room_size
++ * - decrements the data length by pkt_head_room_size
++ * - handover the packet to caller.
++ *
++ * @param[out]	pkt_ptr	Pointer to store rx packet pointer
++ * @param[out] phy_port Pointer to store recv phy port
++ *
++ * @return	-1 if no packet, else returns length of packet.
++ */
++int pfe_recv(unsigned int *pkt_ptr, int *phy_port)
++{
++	struct rx_desc_s *rx_desc = g_rx_desc;
++	struct bufDesc *bd;
++	int len = -1;
++	//volatile u32 ctrl;
++	struct hif_header_s *hif_header;
++
++	bd = rx_desc->rxBase + rx_desc->rxToRead;
++
++	if (bd->ctrl & BD_CTRL_DESC_EN)
++		return len; //No pending Rx packet
++
++	/* this len include hif_header(8bytes) */
++	len = bd->ctrl & 0xFFFF;
++
++	hif_header = (struct hif_header_s *)DDR_PFE_TO_VIRT(bd->data);
++
++
++	/* Get the recive port info from the packet */
++	dprint("Pkt recv'd: Pkt ptr(%p), len(%d), gemac_port(%d) status(%08x)\n",
++				hif_header, len, hif_header->port_no, bd->status);
++
++#if 0
++	{
++		int i;
++		unsigned char *p = (unsigned char *)hif_header;
++		for(i=0; i < len; i++) {
++			if(!(i % 16))
++				printf("\n");
++			printf(" %02x", p[i]);
++		}
++		printf("\n");
++	}
++#endif
++
++	*pkt_ptr = (unsigned int )(hif_header + 1);
++	*phy_port = hif_header->port_no;
++	len -= sizeof(struct hif_header_s);
++#if 0
++	/* reset bd control field */
++	ctrl = (MAX_FRAME_SIZE | BD_CTRL_DESC_EN | BD_CTRL_DIR);
++	bd->ctrl = ctrl;
++	bd->status = 0;
++
++	rx_desc->rxToRead = (rx_desc->rxToRead + 1) & (rx_desc->rxRingSize - 1);
++
++	/* Give START_STROBE to BDP to fetch the descriptor __NOW__,
++	 * BDP need not to wait for rx_poll_cycle time to fetch the descriptor,
++	 * In idle state (ie., no rx pkt), BDP will not fetch
++	 * the descriptor even if strobe is given(I think) */
++	writel((readl(HIF_RX_CTRL) | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL);
++#endif
++	return len;
++}
++
++void pfe_recv_ack(void)
++{
++	struct rx_desc_s *rx_desc = g_rx_desc;
++	struct bufDesc *bd;
++	volatile u32 ctrl;
++
++	bd = rx_desc->rxBase + rx_desc->rxToRead;
++
++	/* reset bd control field */
++	ctrl = (MAX_FRAME_SIZE | BD_CTRL_DESC_EN | BD_CTRL_DIR);
++	bd->ctrl = ctrl;
++	bd->status = 0;
++
++	rx_desc->rxToRead = (rx_desc->rxToRead + 1) & (rx_desc->rxRingSize - 1);
++
++	/* Give START_STROBE to BDP to fetch the descriptor __NOW__,
++	 * BDP need not to wait for rx_poll_cycle time to fetch the descriptor,
++	 * In idle state (ie., no rx pkt), BDP will not fetch
++	 * the descriptor even if strobe is given(I think) */
++	writel((readl(HIF_RX_CTRL) | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL);
++	return;
++}
++
++
++/** HIF Tx interface function
++ * This function sends a single packet to PFE from HIF interface.
++ * - No interrupt indication on tx completion.
++ * - After tx descriptor is updated and TX DMA is enabled.
++ * - To support both chipit and read c2k environment, data is copied to
++ *   tx buffers. After verification this copied can be avoided.
++ *
++ * @param[in] phy_port	Phy port number to send out this packet
++ * @param[in] data	Pointer to the data
++ * @param[in] length	Length of the ethernet packet to be transfered.
++ *
++ * @return -1 if tx Q is full, else returns the tx location where the pkt is placed.
++ */
++int pfe_send(int phy_port, void *data, int length)
++{
++	struct tx_desc_s *tx_desc = g_tx_desc;
++	struct bufDesc *bd;
++	struct hif_header_s hif_header;
++	u8 *tx_buf_va;
++	volatile u32 ctrl_word;
++
++	dprint("%s:pkt: %p, len: %d, txBase: %p, txToSend: %d\n", __func__,
++			data, length, tx_desc->txBase, tx_desc->txToSend);
++
++	bd = tx_desc->txBase + tx_desc->txToSend;
++
++	/* check queue-full condition */
++	if (bd->ctrl & BD_CTRL_DESC_EN) {
++		printf("Tx queue full\n");
++		return -1;
++	}
++
++	/* PFE checks for min pkt size */
++	if (length < MIN_PKT_SIZE) {
++		length = MIN_PKT_SIZE;
++	}
++
++	tx_buf_va = (u8 *)DDR_PFE_TO_VIRT(bd->data);
++	dprint("%s: tx_buf_va: %p, tx_buf_pa: %08x\n", __func__, tx_buf_va, bd->data);
++
++	/* Fill the gemac/phy port number to send this packet out */
++	memset(&hif_header, 0 ,  sizeof(struct hif_header_s));
++	hif_header.port_no = phy_port;
++
++	memcpy(tx_buf_va, (u8 *)&hif_header, sizeof(struct hif_header_s));
++	memcpy(tx_buf_va + sizeof(struct hif_header_s), data, length);
++	length += sizeof(struct hif_header_s);
++
++#if 0
++	{
++		int i;
++		unsigned char *p = (unsigned char *)tx_buf_va;
++		for(i=0; i < length; i++) {
++			if (!(i % 16)) printf("\n");
++			printf("%02x ", p[i]);
++		}
++	}
++#endif
++
++	dprint("before0: Tx Done, status: %08x, ctrl: %08x\n", bd->status, bd->ctrl);
++
++	/* fill the tx desc */
++	ctrl_word = (u32)(BD_CTRL_DESC_EN | BD_CTRL_LIFM | (length & 0xFFFF));
++	bd->ctrl = ctrl_word;
++	bd->status = 0;
++
++	/* NOTE: This code can be removed after verification */
++#if 1 //SRAM_RETENTION_BUG
++	ctrl_word = 0;
++	bd->status = 0xF0;
++	ctrl_word = bd->ctrl;
++	//printf("0: contrl word: %08x\n", ctrl_word);
++#endif
++	wmb();
++
++	/* Indicate Tx DMA to start fetching the Tx Descriptor,
++    	 * set START_STOBE */
++	//writel((readl(HIF_TX_CTRL) | HIF_TX_BDP_CH_START_WSTB), HIF_TX_CTRL);
++	//writel((readl(HIF_TX_CTRL) | (HIF_TX_DMA_EN | HIF_TX_BDP_CH_START_WSTB)), HIF_TX_CTRL);
++	writel((HIF_CTRL_DMA_EN | HIF_CTRL_BDP_CH_START_WSTB), HIF_TX_CTRL);
++
++	udelay(100);
++
++	return tx_desc->txToSend;
++}
++
++/** HIF to check the Tx done
++ *  This function will chceck the tx done indication of the current txToSend locations
++ *  if success, moves the txToSend to next location.
++ *
++ * @return -1 if TX ownership bit is not cleared by hw.
++			  else on success (tx done copletion) returns zero.
++ */
++int pfe_tx_done(void)
++{
++	struct tx_desc_s *tx_desc = g_tx_desc;
++	struct bufDesc *bd;
++	volatile u32 ctrl_word;
++
++	dprint("%s:txBase: %p, txToSend: %d\n", __func__, tx_desc->txBase, tx_desc->txToSend);
++
++	bd = tx_desc->txBase + tx_desc->txToSend;
++
++	/* check queue-full condition */
++	ctrl_word = bd->ctrl;
++	if (ctrl_word & BD_CTRL_DESC_EN)
++		return -1;
++
++	/* reset the control field */
++	bd->ctrl = 0;
++	//bd->data = (u32)NULL;
++	bd->status = 0;
++
++	dprint("Tx Done : status: %08x, ctrl: %08x\n", bd->status, bd->ctrl);
++
++	/* increment the txtosend index to next location */
++	tx_desc->txToSend = (tx_desc->txToSend + 1) & (tx_desc->txRingSize - 1);
++
++	dprint("Tx next pkt location: %d\n", tx_desc->txToSend);
++
++	return 0;
++}
++#if defined CONFIG_LS1024A
++/** GEMAC initialization
++ * Initializes the GEMAC registers.
++ *
++ * @param[in] gemac_base   Pointer to GEMAC reg base
++ * @param[in] mode GEMAC mode to configure (MII config)
++ * @param[in] speed GEMAC speed
++ * @param[in] duplex
++ */
++void pfe_gemac_init(void *gemac_base, u32 mode, u32 speed, u32 duplex)
++{
++	GEMAC_CFG gemac_cfg  = {
++		.mode = mode,
++		.speed = speed,
++		.duplex = duplex,
++	};
++
++	dprint("%s: gemac_base=%p\n", __func__, gemac_base);
++
++	gemac_init(gemac_base, &gemac_cfg);
++
++	//gemac_set_loop(gemac_base, LB_NONE);
++	//gemac_disable_copy_all(gemac_base);
++	//gemac_disable_rx_checksum_offload(gemac_base);
++
++	gemac_allow_broadcast(gemac_base);
++	gemac_disable_unicast(gemac_base); /* unicast hash disabled  */
++	gemac_disable_multicast(gemac_base); /* multicast hash disabled */
++	gemac_disable_fcs_rx(gemac_base);
++	gemac_disable_1536_rx(gemac_base);
++	gemac_enable_pause_rx(gemac_base);
++	gemac_enable_rx_checksum_offload(gemac_base);
++}
++#endif
++/** Helper function to dump Rx descriptors.
++ */
++void hif_rx_desc_dump(void)
++{
++	struct bufDesc *bd_va;
++	int i;
++	struct rx_desc_s *rx_desc;
++
++	if (g_rx_desc == NULL) {
++		printf("%s: HIF Rx desc no init \n", __func__);
++		return;
++	}
++
++	rx_desc = g_rx_desc;
++	bd_va = rx_desc->rxBase;
++
++	printf("HIF rx desc: base_va: %p, base_pa: %08x\n", rx_desc->rxBase, rx_desc->rxBase_pa);
++	for (i=0; i < rx_desc->rxRingSize; i++) {
++//		printf("status: %08x, ctrl: %08x, data: %08x, next: %p\n",
++//			bd_va->status, bd_va->ctrl, bd_va->data, bd_va->next);
++		bd_va++;
++	}
++}
++
++/** HIF Rx Desc initialization function.
++ */
++static int hif_rx_desc_init(struct pfe *pfe)
++{
++	u32 ctrl;
++	struct bufDesc *bd_va;
++	struct bufDesc *bd_pa;
++	struct rx_desc_s *rx_desc;
++	u32 rx_buf_pa;
++	int i;
++
++	/* sanity check */
++	if (g_rx_desc) {
++		printf("%s: HIF Rx desc re-init request\n", __func__);
++		return 0;
++	}
++
++	rx_desc = (struct rx_desc_s *)malloc(sizeof(struct rx_desc_s));
++	if (rx_desc == NULL) {
++		printf("%s:%d:Memory allocation failure\n", __func__, __LINE__);
++		return -1;
++	}
++	memset(rx_desc, 0 , sizeof(struct rx_desc_s));
++
++	/* init: Rx ring buffer */
++	rx_desc->rxRingSize = HIF_RX_DESC_NT;
++
++	/* NOTE: must be 64bit aligned  */
++	bd_va = (struct bufDesc *)(pfe->ddr_baseaddr + RX_BD_BASEADDR);
++	bd_pa = (struct bufDesc *)(pfe->ddr_phys_baseaddr + RX_BD_BASEADDR);
++
++	rx_desc->rxBase = bd_va;
++	rx_desc->rxBase_pa = (unsigned long)bd_pa;
++
++	rx_buf_pa = pfe->ddr_phys_baseaddr + HIF_RX_PKT_DDR_BASEADDR;
++
++
++	printf("%s: Rx desc base: %p, base_pa: %08x, desc_count: %d\n",
++		__func__, rx_desc->rxBase, rx_desc->rxBase_pa, rx_desc->rxRingSize);
++
++	memset(bd_va, 0, sizeof(struct bufDesc) * rx_desc->rxRingSize);
++
++	ctrl = (MAX_FRAME_SIZE | BD_CTRL_DESC_EN | BD_CTRL_DIR | BD_CTRL_LIFM);
++	for (i=0; i < rx_desc->rxRingSize; i++) {
++		bd_va->next = (u32 )(bd_pa + 1);
++		bd_va->ctrl = ctrl;
++		bd_va->data = rx_buf_pa + (i * MAX_FRAME_SIZE);
++//		printf("status: %08x, ctrl: %08x, data: %08x, next: %p\n",
++//			bd_va->status, bd_va->ctrl, bd_va->data, bd_va->next);
++		bd_va++;
++		bd_pa++;
++	}
++	--bd_va;
++	bd_va->next = (u32 )rx_desc->rxBase_pa;
++
++	/* !!! This is a redundent information for h/w as we are also
++		maintaining next address in the buffer descriptor
++		Posedge: reference code does not using this bit to go back to base address */
++	//bd->ctrl |= BD_CTRL_LAST_BD;
++
++	writel(rx_desc->rxBase_pa, HIF_RX_BDP_ADDR);
++	writel((readl(HIF_RX_CTRL) | HIF_CTRL_BDP_CH_START_WSTB), HIF_RX_CTRL);
++
++	g_rx_desc = rx_desc;
++
++	return 0;
++}
++
++/** Helper function to dump Tx Descriptors.
++ */
++void hif_tx_desc_dump(void)
++{
++	struct tx_desc_s *tx_desc;
++	int i;
++	struct bufDesc *bd_va;
++
++	if (g_tx_desc == NULL) {
++		printf("%s: HIF Tx desc no init \n", __func__);
++		return;
++	}
++
++	tx_desc = g_tx_desc;
++	bd_va = tx_desc->txBase;
++
++	printf("HIF tx desc: base_va: %p, base_pa: %08x\n", tx_desc->txBase, tx_desc->txBase_pa);
++	for (i=0; i < tx_desc->txRingSize; i++) {
++//		printf("status: %08x, ctrl: %08x, data: %08x, next: %p\n",
++//			bd_va->status, bd_va->ctrl, bd_va->data, bd_va->next);
++		bd_va++;
++	}
++}
++
++/** HIF Tx descriptor initialization function.
++ */
++static int hif_tx_desc_init(struct pfe *pfe)
++{
++	struct bufDesc *bd_va;
++	struct bufDesc *bd_pa;
++	int i;
++	struct tx_desc_s *tx_desc;
++	u32 tx_buf_pa;
++
++	/* sanity check */
++	if (g_tx_desc) {
++		printf("%s: HIF Tx desc re-init request\n", __func__);
++		return 0;
++	}
++
++	tx_desc = (struct tx_desc_s *)malloc(sizeof(struct tx_desc_s));
++	if (tx_desc == NULL) {
++		printf("%s:%d:Memory allocation failure\n", __func__, __LINE__);
++		return -1;
++	}
++	memset(tx_desc, 0 , sizeof(struct tx_desc_s));
++
++	/* init: Tx ring buffer */
++	tx_desc->txRingSize = HIF_TX_DESC_NT;
++	/* NOTE: must be 64bit aligned  */
++	bd_va = (struct bufDesc *)(pfe->ddr_baseaddr + TX_BD_BASEADDR);
++	bd_pa = (struct bufDesc *)(pfe->ddr_phys_baseaddr + TX_BD_BASEADDR);
++
++	tx_desc->txBase_pa = (unsigned long)bd_pa;
++	tx_desc->txBase = bd_va;
++
++	printf("%s: Tx desc_base: %p, base_pa: %08x, desc_count: %d\n",
++			__func__, tx_desc->txBase, tx_desc->txBase_pa, tx_desc->txRingSize);
++
++	memset(bd_va, 0, sizeof(struct bufDesc) * tx_desc->txRingSize);
++
++	tx_buf_pa = pfe->ddr_phys_baseaddr + HIF_TX_PKT_DDR_BASEADDR;
++
++	for (i=0; i < tx_desc->txRingSize; i++) {
++		bd_va->next = (u32 )(bd_pa + 1);
++		bd_va->data = tx_buf_pa + (i * MAX_FRAME_SIZE);
++//		printf("status: %08x, ctrl: %08x, data: %08x, next: %p\n",
++//			bd_va->status, bd_va->ctrl, bd_va->data, bd_va->next);
++		bd_va++;
++		bd_pa++;
++	}
++	--bd_va;
++	bd_va->next = (u32 )tx_desc->txBase_pa;
++//	printf("status: %08x, ctrl: %08x, data: %08x, next: %p\n",
++//		bd_va->status, bd_va->ctrl, bd_va->data, bd_va->next);
++
++	/* !!! This is a redundent information for h/w as we are also
++		maintaining next address in the buffer descriptor,
++		Posedge: reference code does not using LAST_BD for moving back to base address */
++	//bd->ctrl |= BD_CTRL_LAST_BD;
++
++	writel(tx_desc->txBase_pa, HIF_TX_BDP_ADDR);
++
++	g_tx_desc = tx_desc;
++
++	return 0;
++}
++
++/** PFE/Class initialization.
++ */
++static void pfe_class_init(struct pfe *pfe)
++{
++	CLASS_CFG class_cfg = {
++		.route_table_baseaddr = pfe->ddr_phys_baseaddr + ROUTE_TABLE_BASEADDR,
++		.route_table_hash_bits = ROUTE_TABLE_HASH_BITS,
++	};
++
++	class_init(&class_cfg);
++	printf("class init complete\n");
++}
++
++/** PFE/TMU initialization.
++ */
++static void pfe_tmu_init(struct pfe *pfe)
++{
++	TMU_CFG tmu_cfg = {
++		.llm_base_addr = pfe->ddr_phys_baseaddr + TMU_LLM_BASEADDR,
++		.llm_queue_len = TMU_LLM_QUEUE_LEN,
++	};
++
++	tmu_init(&tmu_cfg);
++	printf("tmu init complete\n");
++}
++
++/** PFE/BMU (both BMU1 & BMU2) initialization.
++ */
++static void pfe_bmu_init(struct pfe *pfe)
++{
++	BMU_CFG bmu1_cfg = {
++		.baseaddr = CBUS_VIRT_TO_PFE(LMEM_BASE_ADDR + BMU1_LMEM_BASEADDR),
++		.count = BMU1_BUF_COUNT,
++		.size = BMU1_BUF_SIZE,
++	};
++
++	BMU_CFG bmu2_cfg = {
++		.baseaddr = pfe->ddr_phys_baseaddr + BMU2_DDR_BASEADDR,
++		.count = BMU2_BUF_COUNT,
++		.size = BMU2_BUF_SIZE,
++	};
++
++	bmu_init(BMU1_BASE_ADDR, &bmu1_cfg);
++	printf("bmu1 init: done\n");
++
++	bmu_init(BMU2_BASE_ADDR, &bmu2_cfg);
++	printf("bmu2 init: done\n");
++}
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++/** PFE/Util initialization function.
++ */
++static void pfe_util_init(struct pfe *pfe)
++{
++	UTIL_CFG util_cfg = { };
++
++	util_init(&util_cfg);
++	printf("util init complete\n");
++}
++#endif
++
++/** PFE/GPI initialization function.
++ *  - egpi1, egpi2, egpi3, hgpi
++ */
++static void pfe_gpi_init(struct pfe *pfe)
++{
++	GPI_CFG egpi1_cfg = {
++		.lmem_rtry_cnt = EGPI1_LMEM_RTRY_CNT,
++		.tmlf_txthres = EGPI1_TMLF_TXTHRES,
++		.aseq_len = EGPI1_ASEQ_LEN,
++	};
++
++	GPI_CFG egpi2_cfg = {
++		.lmem_rtry_cnt = EGPI2_LMEM_RTRY_CNT,
++		.tmlf_txthres = EGPI2_TMLF_TXTHRES,
++		.aseq_len = EGPI2_ASEQ_LEN,
++	};
++
++#if 0
++	GPI_CFG egpi3_cfg = {
++		.lmem_rtry_cnt = EGPI3_LMEM_RTRY_CNT,
++		.tmlf_txthres = EGPI3_TMLF_TXTHRES,
++		.aseq_len = EGPI3_ASEQ_LEN,
++	};
++#endif
++
++	GPI_CFG hgpi_cfg = {
++		.lmem_rtry_cnt = HGPI_LMEM_RTRY_CNT,
++		.tmlf_txthres = HGPI_TMLF_TXTHRES,
++		.aseq_len = HGPI_ASEQ_LEN,
++	};
++
++	gpi_init(EGPI1_BASE_ADDR, &egpi1_cfg);
++	printf("GPI1 init complete\n");
++
++   gpi_init(EGPI2_BASE_ADDR, &egpi2_cfg);
++	printf("GPI2 init complete\n");
++
++#if 0
++   gpi_init(EGPI3_BASE_ADDR, &egpi3_cfg);
++#endif
++
++   gpi_init(HGPI_BASE_ADDR, &hgpi_cfg);
++	printf("HGPI init complete\n");
++}
++
++
++/** PFE/HIF initialization function.
++ */
++static void pfe_hif_init(struct pfe *pfe)
++{
++	hif_tx_disable();
++	hif_rx_disable();
++
++	hif_tx_desc_init(pfe);
++	hif_rx_desc_init(pfe);
++
++	hif_init();
++
++	hif_tx_enable();
++	hif_rx_enable();
++
++	hif_rx_desc_dump();
++	hif_tx_desc_dump();
++
++	printf("HIF init complete\n");
++}
++
++/** PFE initialization
++ * - Firmware loading (CLASS-PE and TMU-PE)
++ * - BMU1 and BMU2 init
++ * - GEMAC init
++ * - GPI init
++ * - CLASS-PE init
++ * - TMU-PE init
++ * - HIF tx and rx descriptors init
++ *
++ * @param[in]	edev	Pointer to eth device structure.
++ *
++ * @return 0, on success.
++ */
++static int pfe_hw_init(struct pfe *pfe)
++{
++
++	dprint("%s: start \n", __func__);
++#if defined (CONFIG_LS1012A)
++	/*This clock workaround needed for LS1012 */
++	writel(0x3,     CLASS_PE_SYS_CLK_RATIO);
++	writel(0x3,	TMU_PE_SYS_CLK_RATIO);
++	writel(0x3,     UTIL_PE_SYS_CLK_RATIO);
++	udelay(10);
++#endif
++
++	pfe_class_init(pfe);
++
++	pfe_tmu_init(pfe);
++
++	pfe_bmu_init(pfe);
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	pfe_util_init(pfe);
++#endif
++
++	pfe_gpi_init(pfe);
++
++	pfe_hif_init(pfe);
++
++	bmu_enable(BMU1_BASE_ADDR);
++	printf("bmu1 enabled\n");
++
++	bmu_enable(BMU2_BASE_ADDR);
++	printf("bmu2 enabled\n");
++
++	printf("%s: done\n", __func__);
++
++	/* NOTE: Load PE specific data (if any) */
++
++	return 0;
++}
++
++
++/** PFE probe function.
++ * - Initializes pfe_lib
++ * - pfe hw init
++ * - fw loading and enables PEs
++ * - should be executed once.
++ *
++ * @param[in] pfe  Pointer the pfe control block
++ */
++int pfe_probe(struct pfe *pfe)
++{
++	static int init_done = 0;
++
++	if (init_done)
++		return 0;
++
++	printf("cbus_baseaddr: %p, ddr_baseaddr: %p, ddr_phys_baseaddr: %08x\n",
++	             pfe->cbus_baseaddr, pfe->ddr_baseaddr, (u32)pfe->ddr_phys_baseaddr);
++
++	pfe_lib_init(pfe->cbus_baseaddr, pfe->ddr_baseaddr, pfe->ddr_phys_baseaddr);
++
++
++	pfe_hw_init(pfe);
++
++	/* Load the class,TM, Util fw
++    * by now pfe is,
++    * - out of reset + disabled + configured,
++    * Fw loading should be done after pfe_hw_init() */
++#ifdef CONFIG_CMD_PFE_START
++	/* It loads firmware from DDR locations Class@0x100000 TMU@0x180000  UTIL@200000*/
++	//For this firmware should be preloaded in DDR
++	//pfe_firmware_init((u8 *)0x80100000, (u8 *)0x80180000, 0x80200000);
++	pfe_firmware_init(NULL, NULL, NULL);
++#else
++	/*It loads default inbuilt sbl firmware */
++	pfe_firmware_init(NULL, NULL, NULL);
++#endif
++
++	init_done = 1;
++
++	return 0;
++}
++
++
++/** PFE remove function
++ *  - stopes PEs
++ *  - frees tx/rx descriptor resources
++ *  - should be called once.
++ *
++ * @param[in] pfe Pointer to pfe control block.
++ */
++int pfe_remove(struct pfe *pfe)
++{
++	if (g_tx_desc) {
++		free(g_tx_desc);
++	}
++
++	if (g_rx_desc) {
++		free(g_rx_desc);
++	}
++
++	pfe_firmware_exit();
++
++	return 0;
++}
++
+diff --git a/drivers/net/pfe_eth/pfe_driver.h b/drivers/net/pfe_eth/pfe_driver.h
+new file mode 100644
+index 0000000..4d2e8b6
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_driver.h
+@@ -0,0 +1,141 @@
++/*
++ *  (C) Copyright 2011
++ *  Author : Mindspeed Technologes
++ *  
++ *  See file CREDITS for list of people who contributed to this
++ *  project.
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License as
++ *  published by the Free Software Foundation; either version 2 of
++ *  the License, or (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ *  MA 02111-1307 USA
++ * */
++
++#ifndef __PFE_DRIVER_H__
++#define __PFE_DRIVER_H__
++
++#include "hal.h"
++
++#include "pfe/pfe.h"
++#include "pfe/cbus.h"
++#include "pfe/cbus/bmu.h"
++
++
++
++typedef struct bufDesc {
++	volatile u32 ctrl;
++	volatile u32 status;
++	volatile u32 data;
++	volatile u32 next;
++		 // struct bufDesc *next;
++}__attribute__((packed)) bufDesc_t;
++
++#if defined(CONFIG_PLATFORM_PCI)
++#define HIF_RX_DESC_NT		4
++#define	HIF_TX_DESC_NT		4
++#else
++#define HIF_RX_DESC_NT		64
++#define	HIF_TX_DESC_NT		64
++#endif
++#define RX_BD_BASEADDR		(HIF_DESC_BASEADDR)
++#define TX_BD_BASEADDR		(HIF_DESC_BASEADDR + HIF_TX_DESC_SIZE)
++
++#define MIN_PKT_SIZE   		56
++#define MAX_FRAME_SIZE     2048
++
++
++typedef struct hif_header_s {
++	u8	port_no; //Carries input port no for host rx packets and output port no for tx pkts
++	u8 reserved0;
++	u32 reserved2;
++} __attribute__((packed)) hif_header_t;
++
++
++typedef struct rx_desc_s {
++	struct bufDesc *rxBase;
++	unsigned int rxBase_pa;
++	int rxToRead;
++	int rxRingSize;
++}rx_desc_t;
++
++typedef struct tx_desc_s {
++	struct bufDesc *txBase;
++	unsigned int txBase_pa;
++	int txToSend;
++	int txRingSize;
++}tx_desc_t;
++
++
++/* The set of statistics registers implemented in the Cadence MAC.
++ * The statistics registers implemented are a subset of all the statistics
++ * available, but contains all the compulsory ones.
++ */
++typedef struct gem_stats{
++    u32 octets_tx_bot;      /* Lower 32-bits for number of octets tx'd */
++    u32 octets_tx_top;      /* Upper 16-bits for number of octets tx'd */
++    u32 frames_tx;          /* Number of frames transmitted OK */
++    u32 broadcast_tx;       /* Number of broadcast frames transmitted */
++    u32 multicast_tx;       /* Number of multicast frames transmitted */
++    u32 pause_tx;           /* Number of pause frames transmitted. */
++    u32 frame64_tx;         /* Number of 64byte frames transmitted */
++    u32 frame65_127_tx;     /* Number of 65-127 byte frames transmitted */
++    u32 frame128_255_tx;    /* Number of 128-255 byte frames transmitted */
++    u32 frame256_511_tx;    /* Number of 256-511 byte frames transmitted */
++    u32 frame512_1023_tx;   /* Number of 512-1023 byte frames transmitted */
++    u32 frame1024_1518_tx;  /* Number of 1024-1518 byte frames transmitted*/
++    u32 frame1519_tx;       /* Number of frames greater than 1518 bytes tx*/
++    u32 tx_urun;            /* Transmit underrun errors due to DMA */
++    u32 single_col;         /* Number of single collision frames */
++    u32 multi_col;          /* Number of multi collision frames */
++    u32 excess_col;         /* Number of excessive collision frames. */
++    u32 late_col;           /* Collisions occuring after slot time */
++    u32 def_tx;             /* Frames deferred due to crs */
++    u32 crs_errors;         /* Errors caused by crs not being asserted. */
++    u32 octets_rx_bot;      /* Lower 32-bits for number of octets rx'd */
++    u32 octets_rx_top;      /* Upper 16-bits for number of octets rx'd */
++    u32 frames_rx;          /* Number of frames received OK */
++    u32 broadcast_rx;       /* Number of broadcast frames received */
++    u32 multicast_rx;       /* Number of multicast frames received */
++    u32 pause_rx;           /* Number of pause frames received. */
++    u32 frame64_rx;         /* Number of 64byte frames received */
++    u32 frame65_127_rx;     /* Number of 65-127 byte frames received */
++    u32 frame128_255_rx;    /* Number of 128-255 byte frames received */
++    u32 frame256_511_rx;    /* Number of 256-511 byte frames received */
++    u32 frame512_1023_rx;   /* Number of 512-1023 byte frames received */
++    u32 frame1024_1518_rx;  /* Number of 1024-1518 byte frames received*/
++    u32 frame1519_rx;       /* Number of frames greater than 1518 bytes rx*/
++    u32 usize_frames;       /* Frames received less than min of 64 bytes */
++    u32 excess_length;      /* Number of excessive length frames rx */
++    u32 jabbers;            /* Excessive length + crc or align errors. */
++    u32 fcs_errors;         /* Number of frames received with crc errors */
++    u32 length_check_errors;/* Number of frames with incorrect length */
++    u32 rx_symbol_errors;   /* Number of times rx_er asserted during rx */
++    u32 align_errors;       /* Frames received without integer no. bytes */
++    u32 rx_res_errors;      /* Number of times buffers ran out during rx */
++    u32 rx_orun;            /* Receive overrun errors due to DMA */
++    u32 ip_cksum;           /* IP header checksum errors */
++    u32 tcp_cksum;           /* TCP checksum errors */
++    u32 udp_cksum;           /* UDP checksum errors */
++} volatile GEM_STATS;
++
++
++int pfe_send(int phy_port, void *data, int length);
++int pfe_recv(unsigned int *pkt_ptr, int *phy_port);
++void pfe_recv_ack(void);
++int pfe_tx_done(void);
++void pfe_gem_enable_all(void);
++void pfe_gemac_init(void *gemac_base, u32 mode, u32 speed, u32 duplex);
++
++
++#endif
++
+diff --git a/drivers/net/pfe_eth/pfe_eth.c b/drivers/net/pfe_eth/pfe_eth.c
+new file mode 100644
+index 0000000..40ac095
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_eth.c
+@@ -0,0 +1,521 @@
++#include <common.h>
++#include <config.h>
++//#include <asm/arch/hardware.h>
++#include <asm/byteorder.h>
++#include <net.h>
++#include <command.h>
++#include <miiphy.h>
++#include "pfe_eth.h"
++
++struct gemac_s gem_info[] = {
++        /* PORT_0 configuration */
++        {
++                /* GEMAC config */
++                .gemac_mode = GMII,
++                .gemac_speed = SPEED_1000M,
++                .gemac_duplex = DUPLEX_FULL,
++
++                /* phy iface */
++                .phy_address = EMAC1_PHY_ADDR,
++		.phy_mode = PHY_INTERFACE_MODE_SGMII,
++        },
++        /* PORT_1 configuration */
++        {
++                /* GEMAC config */
++                .gemac_mode = GMII,
++                .gemac_speed = SPEED_1000M,
++                .gemac_duplex = DUPLEX_FULL,
++
++                /* phy iface */
++                .phy_address = EMAC2_PHY_ADDR,
++		.phy_mode = PHY_INTERFACE_MODE_RGMII,
++        },
++};
++
++#define MAX_GEMACS      2
++
++static struct ls1012a_eth_dev *gemac_list[MAX_GEMACS];
++
++/* Max MII register/address (we support) */
++#define MII_REGISTER_MAX  31
++#define MII_ADDRESS_MAX   31
++
++#define MDIO_TIMEOUT    5000
++
++
++static void ls1012a_gemac_enable(void *gemac_base)
++{
++        writel(readl(gemac_base + EMAC_ECNTRL_REG) | EMAC_ECNTRL_ETHER_EN, gemac_base + EMAC_ECNTRL_REG);	
++}
++
++static void ls1012a_gemac_dsable(void *gemac_base)
++{
++        writel(readl(gemac_base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_ETHER_EN, gemac_base + EMAC_ECNTRL_REG);	
++}
++
++static void ls1012a_gemac_set_mode(void *gemac_base, u32 mode)
++{
++}
++
++static void ls1012a_gemac_set_speed(void *gemac_base, u32 speed)
++{
++	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
++	u32 ecr = readl(gemac_base + EMAC_ECNTRL_REG) & ~EMAC_ECNTRL_SPEED;
++	u32 rcr = readl(gemac_base + EMAC_RCNTRL_REG) & ~EMAC_RCNTRL_RMII_10T;
++	u32 rgmii_pcr = in_be32(&scfg->rgmiipcr) & ~(SCFG_RGMIIPCR_SETSP_1000M|SCFG_RGMIIPCR_SETSP_10M);
++
++	if (speed == _1000BASET) {
++		ecr |= EMAC_ECNTRL_SPEED;
++		rgmii_pcr |= SCFG_RGMIIPCR_SETSP_1000M;
++	}
++	else if (speed != _100BASET){
++		rcr |= EMAC_RCNTRL_RMII_10T;
++		rgmii_pcr |= SCFG_RGMIIPCR_SETSP_10M;
++	}
++
++	writel(ecr, gemac_base + EMAC_ECNTRL_REG);
++	out_be32(&scfg->rgmiipcr, rgmii_pcr | SCFG_RGMIIPCR_SETFD);
++
++	/* remove loop back */
++	rcr &= ~EMAC_RCNTRL_LOOP;
++	/* enable flow control */
++	rcr |= EMAC_RCNTRL_FCE;
++
++	/* Enable MII mode */
++	rcr |= EMAC_RCNTRL_MII_MODE;
++
++	/* CRC field is stripped from the frame */
++	//rcr |= EMAC_RCNTRL_CRC_FWD;
++
++	/* Enable promiscuous mode
++	   FIXME should be removed later*/
++	//rcr |= EMAC_RCNTRL_PROM;
++	writel(rcr, gemac_base + EMAC_RCNTRL_REG);
++
++	/*Enable Tx full duplex */
++	writel(readl(gemac_base + EMAC_TCNTRL_REG ) | EMAC_TCNTRL_FDEN, gemac_base + EMAC_TCNTRL_REG);
++
++}
++
++static void ls1012a_gemac_set_ethaddr(void *gemac_base, uchar *mac)
++{
++        writel((mac[0] << 24) + (mac[1] << 16) + (mac[2] << 8) + mac[3], gemac_base + EMAC_PHY_ADDR_LOW);
++        writel((mac[4] << 24) + (mac[5] << 16) + 0x8808, gemac_base + EMAC_PHY_ADDR_HIGH);
++}
++
++/** Stops or Disables GEMAC pointing to this eth iface.
++ *
++ * @param[in]   edev    Pointer to eth device structure.
++ *
++ * @return      none
++ */
++static void ls1012a_eth_halt(struct eth_device *edev)
++{
++        struct ls1012a_eth_dev *priv = (struct ls1012a_eth_dev *)edev->priv;
++
++        ls1012a_gemac_enable(priv->gem->gemac_base);
++
++        gpi_disable(priv->gem->egpi_base);
++
++        return;
++}
++
++static int ls1012a_eth_init(struct eth_device *dev, bd_t * bd)
++{
++        struct ls1012a_eth_dev *priv = (struct ls1012a_eth_dev *)dev->priv;
++        struct gemac_s *gem = priv->gem;
++	int speed;
++	int tmp;
++
++        /* set ethernet mac address */
++        ls1012a_gemac_set_ethaddr(gem->gemac_base, dev->enetaddr);
++
++	//MAC will be always in GMII mode, it doesn't change with the link speed.
++	//ls1012a_gemac_set_mode(gem->gemac_base, gem->gemac_mode);
++
++	writel(0x00000004, gem->gemac_base + EMAC_TFWR_STR_FWD);
++	writel(0x00000005, gem->gemac_base + EMAC_RX_SECTIOM_FULL);
++	writel(0x00003fff, gem->gemac_base + EMAC_TRUNC_FL);
++	writel(0x00000030, gem->gemac_base + EMAC_TX_SECTION_EMPTY);
++	writel(0x00000000, gem->gemac_base + EMAC_MIB_CTRL_STS_REG);
++
++#ifndef CONFIG_EMU
++#ifdef CONFIG_PHYLIB
++	/* Start up the PHY */
++	//if(gem->phy_mode != PHY_INTERFACE_MODE_SGMII) {
++	if (phy_startup(priv->phydev)) {
++		printf("Could not initialize PHY %s\n",
++				priv->phydev->dev->name);
++		return -1;
++	}
++	speed = priv->phydev->speed;
++	printf("Speed detected %x\n", speed);
++	if(priv->phydev->duplex == DUPLEX_HALF) {
++		printf("Half duplex not supported \n");
++		return -1;
++	}
++#endif
++#else
++	/*in emulator it is always 1000Mbps */
++	speed = _1000BASET;
++#endif
++	ls1012a_gemac_set_speed(gem->gemac_base, speed);
++
++        /* Enable GPI */
++        gpi_enable(gem->egpi_base);
++
++        /* Enable GEMAC */
++        ls1012a_gemac_enable(gem->gemac_base);
++
++	return 0;
++
++}
++
++static int ls1012a_eth_send(struct eth_device *dev, void *data, int length)
++{
++        struct ls1012a_eth_dev *priv = (struct ls1012a_eth_dev *)dev->priv;
++
++        int rc;
++	int i=0;
++
++        rc = pfe_send(priv->gemac_port, data, length);
++
++        if (rc < 0) {
++                printf("Tx Q full\n");
++                return 0;
++        }
++
++        while (1) {
++                rc = pfe_tx_done();
++                if (rc == 0)
++                        break;
++		
++		udelay(100);
++		i++;
++		if(i == 30000)
++			printf("Tx timeout, send failed\n");
++			break;
++
++	}
++
++	return 0;
++}
++
++static int ls1012a_eth_recv(struct eth_device *dev)
++{
++        struct ls1012a_eth_dev *priv = (struct ls1012a_eth_dev *)dev->priv;
++        u32 pkt_buf;
++        int len;
++        int phy_port;
++
++        len = pfe_recv(&pkt_buf, &phy_port);
++
++        if (len < 0)
++                return 0; //no packet in rx
++
++        dprint("Rx pkt: pkt_buf(%08x), phy_port(%d), len(%d)\n", pkt_buf, phy_port, len);
++        if (phy_port != priv->gemac_port)  {
++                printf("Rx pkt not on expected port\n");
++		pfe_recv_ack();
++                return 0;
++        }
++
++	// Pass the packet up to the protocol layers.
++	net_process_received_packet((uchar *)pkt_buf, len);
++
++	pfe_recv_ack();
++	return 0;
++}
++
++#if defined(CONFIG_PHYLIB)
++
++#define MDIO_TIMEOUT    5000
++static int ls1012a_phy_read(struct mii_dev *bus, int phy_addr, int dev_addr, int reg_addr)
++{
++	void *reg_base = bus->priv;
++	u32 reg;
++	u32 phy;
++	u32 reg_data;
++	u16 val;
++	int timeout = MDIO_TIMEOUT;
++
++	reg = ((reg_addr & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_RA_SHIFT);
++	phy = ((phy_addr & EMAC_MII_DATA_PA_MASK) << EMAC_MII_DATA_PA_SHIFT);
++
++	reg_data = (EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_RD | EMAC_MII_DATA_TA | phy | reg );
++
++	//dprint("%s write data %x %x %x\n", __func__, reg_data, reg_addr, phy_addr);
++	writel(reg_data, reg_base + EMAC_MII_DATA_REG);
++
++        /*
++         * wait for the MII interrupt
++         */
++	while(!(readl(reg_base + EMAC_IEVENT_REG) & EMAC_IEVENT_MII))
++	{
++		if (timeout-- <= 0) {
++			printf("Phy MDIO read/write timeout\n");
++			return -1;
++		}
++	}
++
++	/*
++         * clear MII interrupt
++         */
++        writel(EMAC_IEVENT_MII, reg_base + EMAC_IEVENT_REG);
++
++        /*
++         * it's now safe to read the PHY's register
++         */
++        val = (u16)readl(reg_base + EMAC_MII_DATA_REG);
++        dprint("%s: %x phy: %02x reg:%02x val:%#x\n", __func__, reg_base, phy_addr, reg_addr, val);
++
++        return val;
++}
++
++static int ls1012a_phy_write(struct mii_dev *bus, int phy_addr, int dev_addr, int reg_addr, u16 data)
++{
++	void *reg_base = bus->priv;
++	u32 reg;
++	u32 phy;
++	u32 reg_data;
++	int timeout = MDIO_TIMEOUT;
++	int val;
++
++	reg = ((reg_addr & EMAC_MII_DATA_RA_MASK) << EMAC_MII_DATA_RA_SHIFT);
++	phy = ((phy_addr & EMAC_MII_DATA_PA_MASK) << EMAC_MII_DATA_PA_SHIFT);
++
++	reg_data = (EMAC_MII_DATA_ST | EMAC_MII_DATA_OP_WR | EMAC_MII_DATA_TA | phy | reg | data);
++
++	//dprint("%s write data %x\n", __func__, reg_data);
++	writel(reg_data, reg_base + EMAC_MII_DATA_REG);
++
++        /*
++         * wait for the MII interrupt
++         */
++	while(!(readl(reg_base + EMAC_IEVENT_REG) & EMAC_IEVENT_MII))
++	{
++		if (timeout-- <= 0) {
++			printf("Phy MDIO read/write timeout\n");
++			return -1;
++		}
++	}
++
++	/*
++         * clear MII interrupt
++         */
++        writel(EMAC_IEVENT_MII, reg_base + EMAC_IEVENT_REG);
++
++        dprint("%s: phy: %02x reg:%02x val:%#x\n", __func__, phy_addr, reg_addr, data);
++
++        return val;
++}
++
++
++struct mii_dev *ls1012a_mdio_init(struct mdio_info *mdio_info)
++{
++        struct mii_dev *bus;
++        int ret;
++	u32 mdio_speed;
++	u32 pclk = 250000000;
++
++        bus = mdio_alloc();
++        if (!bus) {
++                printf("mdio_alloc failed\n");
++                return NULL;
++        }
++        bus->read = ls1012a_phy_read;
++        bus->write = ls1012a_phy_write;
++	/* MAC1 MDIO used to communicate with external PHYS */
++        bus->priv = mdio_info->reg_base;
++	sprintf(bus->name, mdio_info->name);
++
++	/*configure mdio speed */
++	mdio_speed = (DIV_ROUND_UP(pclk, 4000000) << EMAC_MII_SPEED_SHIFT);
++	mdio_speed |= EMAC_HOLDTIME(0x4);
++	writel(mdio_speed, mdio_info->reg_base + EMAC_MII_CTRL_REG);
++
++        ret = mdio_register(bus);
++        if (ret) {
++                printf("mdio_register failed\n");
++                free(bus);
++                return NULL;
++        }
++	return bus;
++}
++
++static void ls1012a_configure_serdes(struct ls1012a_eth_dev *priv)
++{
++	struct mii_dev bus;
++	int value,sgmii_2500=0;
++
++	printf("%s %d\n", __func__, priv->gemac_port);
++	/* PCS configuration done with corresponding GEMAC */
++	bus.priv = priv->gem->gemac_base;
++
++	ls1012a_phy_read(&bus, 0, MDIO_DEVAD_NONE, 0x0);
++	ls1012a_phy_read(&bus, 0, MDIO_DEVAD_NONE, 0x1);
++	ls1012a_phy_read(&bus, 0, MDIO_DEVAD_NONE, 0x2);
++	ls1012a_phy_read(&bus, 0, MDIO_DEVAD_NONE, 0x3);
++#if 0
++	/*These settings taken from validtion team */
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x0, 0x8000);
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, 0xb); //3 in case our code
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, 0x1a1);
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0x400);
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x0);
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x0, 0x1140);
++	return;
++#endif
++
++	/*Reset serdes */
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x0, 0x8000);
++
++	/* SGMII IF mode + AN enable only for 1G SGMII, not for 2.5G */
++	value = PHY_SGMII_IF_MODE_SGMII;
++	if (!sgmii_2500)
++		value |= PHY_SGMII_IF_MODE_AN;
++
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x14, value);
++
++	/* Dev ability according to SGMII specification */
++	value = PHY_SGMII_DEV_ABILITY_SGMII;
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x4, value);
++
++	/* Adjust link timer for SGMII  -
++	1.6 ms in units of 8 ns = 2 * 10^5 = 0x30d40 */
++	//ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x3);
++	//ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0xd40);
++
++	//These values taken from validation team
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x13, 0x0);
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0x12, 0x400);
++
++	/* Restart AN */
++	value = PHY_SGMII_CR_DEF_VAL;
++	if (!sgmii_2500)
++		value |= PHY_SGMII_CR_RESET_AN;
++	ls1012a_phy_write(&bus, 0, MDIO_DEVAD_NONE, 0, value);
++
++
++}
++
++void ls1012a_set_mdio(int dev_id, struct mii_dev *bus)
++{
++	gem_info[dev_id].bus = bus;
++}
++
++void ls1012a_set_phy_address_mode(int dev_id, int phy_id, int phy_mode)
++{
++	gem_info[dev_id].phy_address = phy_id;
++	gem_info[dev_id].phy_mode  = phy_mode;
++}
++
++int ls1012a_phy_configure(struct ls1012a_eth_dev *priv, int dev_id, int phy_id)
++{
++	struct phy_device *phydev = NULL;
++	struct eth_device *dev = priv->dev;
++        struct gemac_s *gem = priv->gem;
++	struct ccsr_scfg *scfg = (struct ccsr_scfg *)CONFIG_SYS_FSL_SCFG_ADDR;
++
++	//Configure SGMII  PCS
++	if(gem->phy_mode == PHY_INTERFACE_MODE_SGMII ||
++			gem->phy_mode == PHY_INTERFACE_MODE_SGMII_2500)
++	{
++		//printf("Select MDIO from serdes\n");
++		out_be32(&scfg->mdioselcr, 0x00000000);
++		ls1012a_configure_serdes(priv);
++	}
++
++	/*By this time on-chip SGMII initialization is done
++	* we can swith mdio interface to external PHYs */
++	//printf("Select MDIO from PAD\n");
++	out_be32(&scfg->mdioselcr, 0x80000000);
++
++	if(! gem->bus) return -1;
++        phydev = phy_connect(gem->bus, phy_id, dev, gem->phy_mode);
++        if (!phydev) {
++                printf("phy_connect failed\n");
++                return -1;
++        }
++
++        phy_config(phydev);
++
++	priv->phydev = phydev;
++
++        return 0;
++}
++#endif
++
++int ls1012a_gemac_initialize(bd_t * bis, int dev_id, char *devname)
++{
++        struct eth_device *dev;
++        struct ls1012a_eth_dev *priv;
++        struct pfe *pfe;
++	int i;
++
++	if(dev_id > 1)
++	{
++		printf("Invalid port\n");
++		return -1;
++	}
++
++        dev = (struct eth_device *)malloc(sizeof(struct eth_device));
++        if (!dev)
++                return -1;
++
++        memset(dev, 0, sizeof(struct eth_device));
++
++        priv = (struct ls1012a_eth_dev *)malloc(sizeof(struct ls1012a_eth_dev));
++        if (!priv)
++                return -1;
++
++        gemac_list[dev_id] = priv;
++	priv->gemac_port = dev_id;
++        priv->gem = &gem_info[priv->gemac_port];
++        priv->dev = dev;
++
++        pfe = &priv->pfe;
++
++        pfe->cbus_baseaddr = (void *)CONFIG_SYS_PPFE_ADDR;
++        pfe->ddr_baseaddr = (void *)CONFIG_DDR_PPFE_BASEADDR;
++        pfe->ddr_phys_baseaddr = (unsigned long)CONFIG_DDR_PPFE_PHYS_BASEADDR;
++
++	sprintf(dev->name, devname);
++        dev->priv = priv;
++        dev->init = ls1012a_eth_init;
++        dev->halt = ls1012a_eth_halt;
++        dev->send = ls1012a_eth_send;
++        dev->recv = ls1012a_eth_recv;
++
++        /* Tell u-boot to get the addr from the env */
++        for (i = 0; i < 6; i++)
++                dev->enetaddr[i] = 0;
++
++        pfe_probe(pfe);
++
++        switch(priv->gemac_port)  {
++                case EMAC_PORT_0:
++                default:
++                        priv->gem->gemac_base = EMAC1_BASE_ADDR;
++                        priv->gem->egpi_base = EGPI1_BASE_ADDR;
++                break;
++                case EMAC_PORT_1:
++                        priv->gem->gemac_base = EMAC2_BASE_ADDR;
++                        priv->gem->egpi_base = EGPI2_BASE_ADDR;
++                break;
++        }
++
++
++#ifndef CONFIG_EMU
++#if defined(CONFIG_PHYLIB)
++	if(ls1012a_phy_configure(priv, dev_id, gem_info[priv->gemac_port].phy_address))
++		return -1;
++#else
++	#error ("Please enable CONFIG_PHYLIB")
++#endif
++#endif
++
++        eth_register(dev);
++
++	return 0;
++}
+diff --git a/drivers/net/pfe_eth/pfe_eth.h b/drivers/net/pfe_eth/pfe_eth.h
+new file mode 100644
+index 0000000..dfcc00e
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_eth.h
+@@ -0,0 +1,161 @@
++/*
++ *  (C) Copyright 2011
++ *  Author : Mindspeed Technologes
++ *  
++ *  See file CREDITS for list of people who contributed to this
++ *  project.
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License as
++ *  published by the Free Software Foundation; either version 2 of
++ *  the License, or (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ *  MA 02111-1307 USA
++ * */
++
++#ifndef _LS1012a_ETH_H_
++#define _LS1012a_ETH_H_
++
++
++#include "pfe_driver.h"
++
++#ifndef SZ_1K
++#define SZ_1K 1024
++#endif
++
++#ifndef SZ_1M
++#define SZ_1M (1024 * 1024)
++#endif
++
++#define BMU2_DDR_BASEADDR	0
++#define BMU2_BUF_COUNT		(3 * SZ_1K)
++#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
++
++#define TMU_LLM_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
++#define TMU_LLM_QUEUE_LEN	(16 * 256)			/**< Must be power of two and at least 16 * 8 = 128 bytes */
++#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)	/**< (4 TMU's x 16 queues x queue_len) */
++
++#define HIF_RX_PKT_DDR_BASEADDR (TMU_LLM_BASEADDR + TMU_LLM_SIZE)
++#define HIF_RX_PKT_DDR_SIZE     (HIF_RX_DESC_NT * DDR_BUF_SIZE)
++#define HIF_TX_PKT_DDR_BASEADDR (HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE)
++#define HIF_TX_PKT_DDR_SIZE     (HIF_TX_DESC_NT * DDR_BUF_SIZE)
++
++#define HIF_DESC_BASEADDR       (HIF_TX_PKT_DDR_BASEADDR + HIF_TX_PKT_DDR_SIZE)
++#define HIF_RX_DESC_SIZE        (16*HIF_RX_DESC_NT)
++#define HIF_TX_DESC_SIZE        (16*HIF_TX_DESC_NT)
++#define HIF_DESC_SIZE           (HIF_RX_DESC_SIZE + HIF_TX_DESC_SIZE)
++
++//#define FPPDIAG_CTL_BASE_ADDR	(HIF_DESC_BASEADDR + HIF_DESC_SIZE)
++#define FPPDIAG_CTL_BASE_ADDR	0x700000
++#define FPPDIAG_CTL_SIZE		256	/**< Must be at least 11*8 bytes */
++#define FPPDIAG_PAGE_BASE_ADDR	(FPPDIAG_CTL_BASE_ADDR + FPPDIAG_CTL_SIZE)
++#define FPPDIAG_PAGE_TOTAL_SIZE	(11 * 256) /**< 256 bytes per PE, 11 PEs */
++
++//#define UTIL_CODE_BASEADDR	(FPPDIAG_PAGE_BASE_ADDR + FPPDIAG_PAGE_TOTAL_SIZE)
++#define UTIL_CODE_BASEADDR	0x780000
++#define UTIL_CODE_SIZE		(128 * SZ_1K)
++
++#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
++#define UTIL_DDR_DATA_SIZE	(64 * SZ_1K)
++
++#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
++#define CLASS_DDR_DATA_SIZE	(32 * SZ_1K)
++
++#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
++#define TMU_DDR_DATA_SIZE	(32 * SZ_1K)
++
++//#define ROUTE_TABLE_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
++#define ROUTE_TABLE_BASEADDR	0x800000
++#define ROUTE_TABLE_HASH_BITS_MAX	15	/**< 32K entries */
++#define ROUTE_TABLE_HASH_BITS	8	/**< 256 entries */
++#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS_MAX) * CLASS_ROUTE_SIZE)
++
++#define	PFE_TOTAL_DATA_SIZE	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
++
++#if PFE_TOTAL_DATA_SIZE > (12 * SZ_1M)
++#error DDR mapping above 12MiB
++#endif
++
++/* LMEM Mapping */
++#define BMU1_LMEM_BASEADDR	0
++#define BMU1_BUF_COUNT		256
++#define BMU1_LMEM_SIZE		(LMEM_BUF_SIZE * BMU1_BUF_COUNT)
++
++
++#define CONFIG_DDR_PPFE_PHYS_BASEADDR	0x03800000
++#define CONFIG_DDR_PPFE_BASEADDR	0x83800000 
++
++
++#define GEMAC_NO_PHY 		1
++#define GEMAC_HAVE_SWITCH_PHY     2
++#define GEMAC_HAVE_SWITCH       	4
++
++
++typedef struct gemac_s {
++
++	void *gemac_base; 
++	void *egpi_base;
++
++	/* GEMAC config */
++	int gemac_mode;
++	int gemac_speed;
++	int gemac_duplex;
++        int flags;
++	/* phy iface */
++	int phy_address;
++	int phy_mode;
++	struct mii_dev *bus;
++
++} gemac_t;
++
++struct mdio_info {
++	void *reg_base;
++	char *name;
++};
++
++
++struct pfe {
++	unsigned long ddr_phys_baseaddr;
++	void *ddr_baseaddr;
++	void *cbus_baseaddr;
++};
++
++
++typedef struct ls1012a_eth_dev {
++
++	int gemac_port;
++
++	struct gemac_s *gem;
++	struct pfe      pfe;
++
++        struct eth_device *dev;
++#ifdef CONFIG_PHYLIB
++	struct phy_device *phydev;
++#endif
++} ls1012a_eth_dev_t;
++
++
++struct firmware {
++	u8 *data;
++};
++
++
++int pfe_probe(struct pfe *pfe);
++int pfe_remove(struct pfe *pfe);
++
++
++//#define dprint(fmt, arg...)	printf(fmt, ##arg)
++#define dprint(fmt, arg...)
++//#define dprint	printf
++
++
++#endif //_LS1012a_ETH_H_
++
+diff --git a/drivers/net/pfe_eth/pfe_firmware.c b/drivers/net/pfe_eth/pfe_firmware.c
+new file mode 100644
+index 0000000..165eb3c
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_firmware.c
+@@ -0,0 +1,193 @@
++
++
++/** @file
++ *  Contains all the functions to handle parsing and loading of PE firmware files.
++ */
++
++#include "hal.h"
++#include "pfe_firmware.h"
++#include "pfe/pfe.h"
++
++
++/* CLASS-PE ELF file content */
++unsigned char class_fw_data[] __attribute__((aligned(sizeof(int)))) = {
++#include CLASS_FIRMWARE_FILENAME
++};
++
++/* TMU-PE ELF file content */
++unsigned char tmu_fw_data[] __attribute__((aligned(sizeof(int)))) = {
++#include TMU_FIRMWARE_FILENAME
++};
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++unsigned char util_fw_data[] = {
++#include UTIL_FIRMWARE_FILENAME
++};
++#endif
++
++/** PFE elf firmware loader.
++* Loads an elf firmware image into a list of PE's (specified using a bitmask)
++*
++* @param pe_mask	Mask of PE id's to load firmware to
++* @param fw		Pointer to the firmware image
++*
++* @return		0 on sucess, a negative value on error
++*
++*/
++int pfe_load_elf(int pe_mask, const struct firmware *fw)
++{
++	Elf32_Ehdr *elf_hdr = (Elf32_Ehdr *)fw->data;
++	Elf32_Half sections = be16_to_cpu(elf_hdr->e_shnum);
++	Elf32_Shdr *shdr = (Elf32_Shdr *) (fw->data + be32_to_cpu(elf_hdr->e_shoff));
++	int id, section;
++	int rc;
++
++	printf("%s: no of sections: %d\n", __func__, sections);
++
++	/* Some sanity checks */
++	if (strncmp(&elf_hdr->e_ident[EI_MAG0], ELFMAG, SELFMAG))
++	{
++		printf("%s: incorrect elf magic number\n", __func__);
++		return -1;
++	}
++
++	if (elf_hdr->e_ident[EI_CLASS] != ELFCLASS32)
++	{
++		printf("%s: incorrect elf class(%x)\n", __func__, elf_hdr->e_ident[EI_CLASS]);
++		return -1;
++	}
++
++	if (elf_hdr->e_ident[EI_DATA] != ELFDATA2MSB)
++	{
++		printf("%s: incorrect elf data(%x)\n", __func__, elf_hdr->e_ident[EI_DATA]);
++		return -1;
++	}
++
++	if (be16_to_cpu(elf_hdr->e_type) != ET_EXEC)
++	{
++		printf("%s: incorrect elf file type(%x)\n", __func__, be16_to_cpu(elf_hdr->e_type));
++		return -1;
++	}	
++
++	for (section = 0; section < sections; section++, shdr++)
++	{
++		if (!(be32_to_cpu(shdr->sh_flags) & (SHF_WRITE | SHF_ALLOC | SHF_EXECINSTR)))
++                        continue;
++		for (id = 0; id < MAX_PE; id++)
++			if (pe_mask & (1 << id))
++			{
++				rc = pe_load_elf_section(id, fw->data, shdr);
++				if (rc < 0)
++					goto err;
++			}
++		//printf("\n");
++	}
++
++	return 0;
++
++err:
++	return rc;
++}
++
++/** PFE firmware initialization.
++* Loads different firmware files from filesystem.
++* Initializes PE IMEM/DMEM and UTIL-PE DDR
++* Initializes control path symbol addresses (by looking them up in the elf firmware files
++* Takes PE's out of reset
++*
++* @return	0 on sucess, a negative value on error
++*
++*/
++int pfe_firmware_init(u8 *class_fw_loc, u8 *tmu_fw_loc, u8 *util_fw_loc)
++{
++	struct firmware class_fw, tmu_fw;
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++ 	struct firmware util_fw;
++#endif
++	int rc = 0;
++
++	printf("%s\n", __func__);
++#if 0
++	/*This testing purpose only */
++	printf("Copying default fw \n");
++	memcpy(class_fw_loc, class_fw_data, sizeof(class_fw_data));
++	memcpy(tmu_fw_loc, tmu_fw_data, sizeof(tmu_fw_data));
++	memcpy(util_fw_loc, util_fw_data, sizeof(util_fw_data));
++#endif
++
++	if (class_fw_loc)
++		class_fw.data = class_fw_loc;
++	else
++		class_fw.data = class_fw_data;
++
++	if (tmu_fw_loc)
++		tmu_fw.data = tmu_fw_loc;
++	else
++		tmu_fw.data = tmu_fw_data;
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	if (util_fw_loc)
++		util_fw.data = util_fw_loc;
++	else
++		util_fw.data = util_fw_data;
++#endif
++
++	rc = pfe_load_elf(CLASS_MASK, &class_fw);
++	if (rc < 0) {
++		printf("%s: class firmware load failed\n", __func__);
++		goto err3;
++	}
++
++	printf("%s: class firmware loaded\n", __func__);
++
++	rc = pfe_load_elf(TMU_MASK, &tmu_fw);
++	if (rc < 0) {
++		printf("%s: tmu firmware load failed\n", __func__);
++		goto err3;
++	}
++
++	printf("%s: tmu firmware loaded\n", __func__);
++
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	rc = pfe_load_elf(UTIL_MASK, &util_fw);
++	if (rc < 0) {
++		printf("%s: util firmware load failed\n", __func__);
++		goto err3;
++	}
++
++	printf("%s: util firmware loaded\n", __func__);
++
++	util_enable();
++#endif
++
++#if defined(CONFIG_LS1012A)
++	tmu_enable(0xb);
++#else
++	tmu_enable(0xf);
++#endif
++	class_enable();
++
++	gpi_enable(HGPI_BASE_ADDR);
++
++
++err3:
++	return rc;
++}
++
++/** PFE firmware cleanup
++* Puts PE's in reset
++*
++*
++*/
++void pfe_firmware_exit(void)
++{
++	printf("%s\n", __func__);
++
++	class_disable();
++	tmu_disable(0xf);
++#if !defined(CONFIG_UTIL_PE_DISABLED)
++	util_disable();
++#endif
++	hif_tx_disable();
++	hif_rx_disable();
++}
+diff --git a/drivers/net/pfe_eth/pfe_firmware.h b/drivers/net/pfe_eth/pfe_firmware.h
+new file mode 100644
+index 0000000..2823162
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_firmware.h
+@@ -0,0 +1,20 @@
++
++
++/** @file
++ *  Contains all the defines to handle parsing and loading of PE firmware files.
++ */
++
++#ifndef __PFE_FIRMWARE_H__
++#define __PFE_FIRMWARE_H__
++
++
++#define CLASS_FIRMWARE_FILENAME		"class_sbl_elf.fw"
++#define TMU_FIRMWARE_FILENAME		   "tmu_sbl_elf.fw"
++#define UTIL_FIRMWARE_FILENAME		"util_sbl_elf.fw" 
++
++
++int pfe_firmware_init(u8 * clasS_fw_loc, u8 *tmu_fw_loc, u8 *util_fw_loc);
++void pfe_firmware_exit(void);
++
++
++#endif
+diff --git a/drivers/net/pfe_eth/pfe_mod.h b/drivers/net/pfe_eth/pfe_mod.h
+new file mode 100644
+index 0000000..9436b72
+--- /dev/null
++++ b/drivers/net/pfe_eth/pfe_mod.h
+@@ -0,0 +1,140 @@
++/*
++ *  (C) Copyright 2011
++ *  Author : Mindspeed Technologes
++ *  
++ *  See file CREDITS for list of people who contributed to this
++ *  project.
++ *
++ *  This program is free software; you can redistribute it and/or
++ *  modify it under the terms of the GNU General Public License as
++ *  published by the Free Software Foundation; either version 2 of
++ *  the License, or (at your option) any later version.
++ *  
++ *  This program is distributed in the hope that it will be useful,
++ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *  GNU General Public License for more details.
++ *  
++ *  You should have received a copy of the GNU General Public License
++ *  along with this program; if not, write to the Free Software
++ *  Foundation, Inc., 59 Temple Place, Suite 330, Boston,
++ *  MA 02111-1307 USA
++ * */
++
++
++#ifndef _PFE_MOD_H_
++#define _PFE_MOD_H_
++
++#include <linux/device.h>
++
++#include "pfe/pfe.h"
++#include "pfe/cbus.h"
++#include "pfe/cbus/bmu.h"
++
++#include "pfe_driver.h"
++
++struct pfe;
++
++
++struct pfe {
++	unsigned long ddr_phys_baseaddr;
++	void *ddr_baseaddr;
++	void *cbus_baseaddr;
++	void *apb_baseaddr;
++	void *iram_baseaddr;
++	int hif_irq;
++	struct device *dev;
++	struct pci_dev *pdev;
++
++#if 0
++	struct pfe_ctrl ctrl;
++	struct pfe_hif hif;
++	struct pfe_eth eth;
++#endif
++};
++
++extern struct pfe *pfe;
++
++int pfe_probe(struct pfe *pfe);
++int pfe_remove(struct pfe *pfe);
++
++#ifndef SZ_1K
++#define SZ_1K 1024
++#endif
++
++#ifndef SZ_1M
++#define SZ_1M (1024 * 1024)
++#endif
++
++/* DDR Mapping */
++#if !defined(CONFIG_PLATFORM_PCI)
++#define UTIL_CODE_BASEADDR	0
++#define UTIL_CODE_SIZE		(128 * SZ_1K)
++#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
++#define UTIL_DDR_DATA_SIZE	(64 * SZ_1K)
++#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
++#define CLASS_DDR_DATA_SIZE	(32 * SZ_1K)
++#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
++#define TMU_DDR_DATA_SIZE	(32 * SZ_1K)
++#define ROUTE_TABLE_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
++#define ROUTE_TABLE_HASH_BITS	15	/**< 32K entries */
++#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE)
++#define BMU2_DDR_BASEADDR	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
++#define BMU2_BUF_COUNT		(4096 - 256)			/**< This is to get a total DDR size of 12MiB */
++#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
++#define TMU_LLM_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
++#define TMU_LLM_QUEUE_LEN	(16 * 256)			/**< Must be power of two and at least 16 * 8 = 128 bytes */
++#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)	/**< (4 TMU's x 16 queues x queue_len) */
++
++#if (TMU_LLM_BASEADDR + TMU_LLM_SIZE) > 0xC00000
++#error DDR mapping above 12MiB
++#endif
++
++#else
++
++#define UTIL_CODE_BASEADDR	0
++#if defined(CONFIG_UTIL_PE_DISABLED)
++#define UTIL_CODE_SIZE		(0 * SZ_1K)
++#else
++#define UTIL_CODE_SIZE		(8 * SZ_1K)
++#endif
++#define UTIL_DDR_DATA_BASEADDR	(UTIL_CODE_BASEADDR + UTIL_CODE_SIZE)
++#define UTIL_DDR_DATA_SIZE	(0 * SZ_1K)
++#define CLASS_DDR_DATA_BASEADDR	(UTIL_DDR_DATA_BASEADDR + UTIL_DDR_DATA_SIZE)
++#define CLASS_DDR_DATA_SIZE	(0 * SZ_1K)
++#define TMU_DDR_DATA_BASEADDR	(CLASS_DDR_DATA_BASEADDR + CLASS_DDR_DATA_SIZE)
++#define TMU_DDR_DATA_SIZE	(0 * SZ_1K)
++#define ROUTE_TABLE_BASEADDR	(TMU_DDR_DATA_BASEADDR + TMU_DDR_DATA_SIZE)
++#define ROUTE_TABLE_HASH_BITS	5	/**< 32 entries */
++#define ROUTE_TABLE_SIZE	((1 << ROUTE_TABLE_HASH_BITS) * CLASS_ROUTE_SIZE)
++#define BMU2_DDR_BASEADDR	(ROUTE_TABLE_BASEADDR + ROUTE_TABLE_SIZE)
++#define BMU2_BUF_COUNT		8
++#define BMU2_DDR_SIZE		(DDR_BUF_SIZE * BMU2_BUF_COUNT)
++#define TMU_LLM_BASEADDR	(BMU2_DDR_BASEADDR + BMU2_DDR_SIZE)
++#define TMU_LLM_QUEUE_LEN	(16 * 8)			/**< Must be power of two and at least 16 * 8 = 128 bytes */
++#define TMU_LLM_SIZE		(4 * 16 * TMU_LLM_QUEUE_LEN)	/**< (4 TMU's x 16 queues x queue_len) */
++#define HIF_DESC_BASEADDR	(TMU_LLM_BASEADDR + TMU_LLM_SIZE)
++#define HIF_RX_DESC_SIZE	(16*HIF_RX_DESC_NT)
++#define HIF_TX_DESC_SIZE	(16*HIF_TX_DESC_NT)
++#define HIF_DESC_SIZE		(HIF_RX_DESC_SIZE + HIF_TX_DESC_SIZE)
++#define HIF_RX_PKT_DDR_BASEADDR	(HIF_DESC_BASEADDR + HIF_DESC_SIZE)
++#define HIF_RX_PKT_DDR_SIZE	(HIF_RX_DESC_NT * DDR_BUF_SIZE)
++#define HIF_TX_PKT_DDR_BASEADDR	(HIF_RX_PKT_DDR_BASEADDR + HIF_RX_PKT_DDR_SIZE)
++#define HIF_TX_PKT_DDR_SIZE	(HIF_TX_DESC_NT * DDR_BUF_SIZE)
++#define ROUTE_BASEADDR		(HIF_TX_PKT_DDR_BASEADDR + HIF_TX_PKT_DDR_SIZE)
++#define ROUTE_SIZE		(2 * CLASS_ROUTE_SIZE)
++
++#if (ROUTE_BASEADDR + ROUTE_SIZE) > 0x10000
++#error DDR mapping above 64KiB
++#endif
++
++#define PFE_HOST_TO_PCI(addr)	(((u32)addr)- ((u32)DDR_BASE_ADDR))
++#define PFE_PCI_TO_HOST(addr)	(((u32)addr)+ ((u32)DDR_BASE_ADDR))
++#endif
++
++/* LMEM Mapping */
++#define BMU1_LMEM_BASEADDR	0
++#define BMU1_BUF_COUNT		256
++#define BMU1_LMEM_SIZE		(LMEM_BUF_SIZE * BMU1_BUF_COUNT)
++
++#endif /* _PFE_MOD_H */
+diff --git a/drivers/net/pfe_eth/tmu_sbl_elf.fw b/drivers/net/pfe_eth/tmu_sbl_elf.fw
+new file mode 100644
+index 0000000..d9e8409
+--- /dev/null
++++ b/drivers/net/pfe_eth/tmu_sbl_elf.fw
+@@ -0,0 +1 @@
++0x7f,0x45,0x4c,0x46,0x01,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x6f,0x00,0x00,0x00,0x01,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x34,0x00,0x00,0x25,0x80,0x00,0x04,0x00,0x05,0x00,0x34,0x00,0x20,0x00,0x04,0x00,0x28,0x00,0x0a,0x00,0x09,0x00,0x00,0x00,0x01,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x04,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x10,0x80,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x80,0x00,0x00,0x00,0x6c,0x00,0x00,0x02,0x18,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x12,0x98,0x00,0x00,0x02,0x98,0x00,0x00,0x02,0x98,0x00,0x00,0x01,0x20,0x00,0x00,0x01,0x20,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x20,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x05,0x12,0x00,0x00,0x05,0x12,0x00,0x00,0x00,0x05,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x01,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2a,0x2a,0x2a,0x2a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x80,0x00,0x00,0x02,0x90,0x44,0x45,0x41,0x44,0x0c,0x08,0x04,0x00,0xc1,0x1c,0x00,0x0c,0x0d,0x09,0x05,0x01,0x0e,0x0a,0x06,0x02,0x0f,0x0b,0x07,0x03,0x3f,0xff,0xff,0xff,0xc1,0x26,0x00,0x48,0xc1,0x26,0x00,0x4c,0xc1,0x26,0x00,0x50,0xc1,0x26,0x00,0x60,0x69,0x6e,0x69,0x74,0x72,0x75,0x6e,0x20,0x73,0x74,0x6f,0x70,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x80,0x11,0x00,0x11,0x80,0x12,0x00,0x12,0x80,0x13,0x00,0x13,0x80,0x14,0x00,0x14,0x80,0x15,0x00,0x15,0x80,0x16,0x00,0x16,0x80,0x17,0x00,0x17,0x80,0xea,0x00,0xc8,0x00,0xe0,0x07,0xc8,0x34,0xea,0x00,0xcb,0x80,0xe0,0x01,0xcb,0xa0,0xe0,0x60,0x3c,0x00,0xcc,0x02,0xe0,0x60,0x3c,0x10,0xe0,0x00,0xd2,0x4c,0x3a,0x80,0xea,0x00,0xcb,0x80,0xe0,0x00,0xcb,0xa8,0xb8,0x47,0xb8,0xd7,0xb9,0x67,0xb9,0xf7,0xe0,0x01,0xba,0x07,0xe0,0x01,0xba,0x97,0xe0,0x01,0xbb,0x27,0xe0,0x01,0xbb,0xb7,0xe0,0x01,0xbc,0x47,0xe0,0x01,0xbc,0xd7,0xe0,0x01,0xbd,0x67,0xe0,0x01,0xbd,0xf7,0xe0,0x02,0xbe,0x07,0xe0,0x02,0xbe,0x97,0xe0,0x02,0xbf,0x27,0xe0,0x02,0xbf,0xb7,0xe0,0x60,0x3e,0x09,0xe0,0x60,0x3e,0x8a,0xe0,0x60,0x3f,0x0b,0xe0,0x60,0x3f,0x8c,0xbe,0x07,0xbe,0x97,0xbf,0x27,0xbf,0xb7,0xea,0x00,0xcb,0x80,0xe0,0x01,0xcb,0xa0,0x3c,0x6c,0xe0,0x00,0x00,0x82,0xe0,0x00,0x1f,0x83,0xe0,0x00,0x1f,0x05,0xbf,0x0f,0xbc,0x1f,0xbf,0x0f,0x3a,0x80,0x00,0xff,0xea,0x00,0x7f,0xd0,0xe8,0x00,0xc7,0x80,0xeb,0x82,0xcf,0x02,0xbf,0x0f,0xeb,0x82,0xcf,0x03,0xbf,0x2f,0xeb,0x82,0xcf,0x04,0xbf,0x4f,0xeb,0x82,0xcf,0x05,0xbf,0x6f,0xeb,0x82,0xcf,0x06,0xe0,0x01,0xbf,0x0f,0xeb,0x82,0xcf,0x07,0xe0,0x01,0xbf,0x2f,0xeb,0x82,0xcf,0x08,0xe0,0x01,0xbf,0x4f,0xeb,0x82,0xcf,0x09,0xe0,0x01,0xbf,0x6f,0xeb,0x82,0xcf,0x0a,0xe0,0x02,0xbf,0x0f,0xeb,0x82,0xcf,0x0b,0xe0,0x02,0xbf,0x2f,0xea,0x01,0x7f,0x20,0xe8,0x00,0xc7,0x00,0xeb,0x82,0xce,0x9c,0xbe,0x8e,0xeb,0x82,0xce,0x9d,0xbe,0xfe,0xeb,0x82,0xce,0x9e,0xe0,0x01,0xbe,0xee,0xeb,0x82,0xce,0x9f,0xe0,0x02,0xbe,0xde,0xeb,0x82,0xce,0xa0,0xe0,0x03,0xbe,0xce,0xeb,0x82,0xce,0xa1,0xe0,0x04,0xbe,0xbe,0xeb,0x82,0xce,0xa2,0xe0,0x05,0xbe,0xae,0xeb,0x82,0xce,0xa3,0xe0,0x06,0xbe,0x9e,0x17,0x0f,0xbf,0x3f,0xe0,0x01,0x17,0x70,0xbf,0x5f,0xe0,0x1e,0x17,0x00,0xbf,0x7f,0xe1,0xe0,0x17,0x00,0xe0,0x01,0xbf,0x1f,0x16,0x80,0x17,0x00,0xea,0x03,0x7d,0x00,0x15,0x82,0xe0,0x0c,0x37,0x42,0x3f,0xed,0xc6,0x01,0xe0,0xaa,0xae,0x7f,0x3e,0x6e,0xe2,0x00,0xc6,0x03,0xae,0x1f,0xc7,0x01,0xad,0xaf,0xe3,0xff,0xc7,0x7f,0x16,0x02,0xc6,0x83,0xe2,0x00,0xcf,0x10,0x01,0xee,0xea,0x01,0x7f,0xa0,0xe8,0x00,0xc7,0x80,0x16,0x81,0xbe,0xbf,0x16,0xa0,0xbf,0x4f,0xe0,0x02,0x17,0x00,0xe0,0x01,0xbe,0xbf,0xe0,0x04,0x16,0x80,0xbf,0x5f,0xe0,0x22,0x17,0x11,0xe0,0x01,0xbe,0xcf,0xe0,0x40,0x16,0x80,0xbf,0x1f,0x17,0x02,0xe0,0x01,0xbe,0xdf,0xe0,0x44,0x16,0xa2,0xe0,0x01,0xbf,0x2f,0xe0,0x20,0x15,0x80,0xe0,0x01,0xbe,0x8f,0x16,0x84,0xe0,0x08,0xaf,0x0f,0xe0,0x0b,0xaf,0x4f,0x17,0x08,0xe0,0x02,0xbe,0x9f,0xe0,0x00,0x16,0xc0,0xe0,0x03,0xbf,0x0f,0xe0,0x01,0x17,0x00,0xe0,0x02,0xbe,0xaf,0xe0,0x08,0x16,0x80,0xe0,0x03,0xbf,0x1f,0xe0,0x10,0x17,0x00,0xe0,0x02,0xbe,0xbf,0xe0,0x80,0x16,0x80,0xe0,0x03,0xbf,0x2f,0xe1,0x00,0x17,0x00,0xe0,0x02,0xbe,0xcf,0xe0,0x88,0x16,0xc4,0xe0,0x03,0xbf,0x3f,0xe1,0x11,0x17,0x08,0xe0,0x01,0xbe,0xff,0xe0,0x02,0xbf,0x6f,0xe0,0x00,0x1e,0x86,0xe0,0x00,0x1f,0x07,0xe0,0x01,0xae,0x0f,0xbd,0xef,0xe0,0x04,0xae,0x4f,0xbe,0x8e,0x00,0x00,0x17,0x00,0xa6,0x8f,0xbf,0x4d,0x00,0x00,0xe0,0x00,0x1e,0x08,0xa6,0xff,0xbe,0x3d,0x00,0x00,0xa6,0xff,0xbf,0x4d,0x00,0x00,0xe0,0x00,0x1e,0x09,0xe0,0x01,0xa6,0xef,0xbe,0x3d,0x00,0x00,0xe0,0x01,0xa6,0xef,0xbf,0x4d,0x00,0x00,0xe0,0x00,0x1e,0x0a,0xe0,0x02,0xa6,0xdf,0xbe,0x3d,0x00,0x00,0xe0,0x02,0xa6,0xdf,0xbf,0x4d,0x00,0x00,0x3d,0x6f,0xe0,0x00,0xc5,0x70,0x14,0x12,0xe0,0x0a,0x17,0x00,0xe0,0x04,0x16,0x50,0xe0,0x0e,0x16,0xd0,0xa4,0x8f,0xbc,0x09,0x00,0x00,0xa4,0x8f,0xbf,0x19,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbe,0x09,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbf,0x19,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbd,0xa9,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbe,0xb9,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbd,0xc9,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbe,0x59,0x00,0x00,0xa4,0x8f,0xe0,0x01,0xbe,0xe9,0x00,0x00,0xe1,0x80,0xa4,0xff,0xe0,0x01,0xbf,0x79,0x00,0x00,0x3f,0xfa,0x01,0xd8,0xea,0x00,0x7f,0xd0,0xe8,0x00,0xc7,0x80,0x3f,0x6f,0xe0,0x00,0x1e,0x0b,0xc7,0x28,0x15,0x81,0xa6,0x8f,0xbd,0x8d,0x00,0x00,0xe1,0x80,0xa6,0xaf,0xbe,0x1d,0x00,0x00,0x3f,0xfe,0x01,0xf8,0xea,0x03,0x7f,0xb0,0xe0,0x0a,0x15,0x81,0xe0,0x12,0x16,0x02,0xe0,0x22,0x16,0x84,0xe0,0x42,0x17,0x08,0xbd,0x8f,0xbe,0x1f,0xbe,0xaf,0xbf,0x3f,0xbd,0xcf,0xbe,0x5f,0xbe,0xef,0xbf,0x7f,0xe0,0x01,0xbd,0x8f,0xe0,0x01,0xbe,0x1f,0xe0,0x01,0xbe,0xaf,0xe0,0x01,0xbf,0x3f,0xe0,0x01,0xbd,0xcf,0xe0,0x01,0xbe,0x5f,0xe0,0x01,0xbe,0xef,0xe0,0x01,0xbf,0x7f,0x38,0x82,0xeb,0x82,0xcf,0xa6,0xa6,0x8f,0x3f,0xed,0xe2,0x00,0xc7,0x87,0xe0,0x01,0x2f,0xba,0xe4,0x0c,0x36,0xc3,0x3f,0xec,0xe2,0x00,0xc7,0x81,0xe0,0x01,0x27,0xb3,0x3d,0x6c,0x36,0xc3,0xea,0x00,0x7e,0x50,0xe3,0xff,0xc6,0xff,0x17,0x00,0x17,0x81,0xe2,0x07,0xc5,0x7f,0xe8,0x00,0xc6,0x00,0xe0,0x0b,0x35,0x5f,0xe2,0x00,0xc5,0x81,0x25,0x86,0xe0,0x0b,0x37,0xa3,0x3d,0x9c,0xa5,0x9b,0x3f,0x4b,0xc7,0x81,0xe2,0x00,0xcf,0x85,0x01,0xf3,0x3e,0xde,0xe0,0x01,0x26,0x96,0xe0,0x00,0x1f,0x03,0xa7,0xae,0xc7,0x81,0xbf,0xae,0xea,0x01,0x7f,0xa0,0xe8,0x00,0xc7,0x80,0xe0,0x02,0xa7,0x6f,0xe0,0x0e,0x3e,0xde,0x2f,0x0e,0xe0,0x01,0xa7,0x7f,0xe0,0x0e,0x3e,0xde,0x2f,0x0b,0xe0,0x01,0xa7,0x0f,0x17,0x80,0xe0,0x0e,0x3e,0xde,0x27,0x06,0x17,0x81,0x00,0x84,0x17,0x83,0x00,0x82,0x17,0x82,0xe0,0x0e,0x37,0xa2,0xe0,0x0b,0x37,0xa5,0x3d,0xae,0xea,0x01,0x7f,0x20,0xe8,0x00,0xc7,0x00,0x3d,0x9e,0xe0,0x01,0x8e,0x0b,0xa7,0x1b,0x2e,0x1d,0xe1,0xff,0x16,0xff,0x3f,0x7d,0x17,0x80,0x05,0x84,0xe4,0x0e,0x37,0x40,0x17,0x90,0xe2,0x01,0xcf,0x7f,0x05,0x83,0x37,0x48,0xc7,0x88,0xe2,0x00,0xcf,0x0f,0x05,0x83,0x37,0x44,0xc7,0x84,0xe2,0x00,0xcf,0x03,0x05,0x83,0x37,0x42,0xc7,0x82,0x16,0x82,0xe1,0x2e,0x3f,0x2d,0x3f,0x9e,0x00,0xab,0xe0,0x0e,0x3e,0xde,0x16,0x00,0x16,0x80,0x15,0x01,0xe0,0x09,0x36,0xa2,0xe0,0x09,0x3d,0x99,0xa4,0xb9,0xe0,0x09,0x3f,0x59,0x24,0x85,0xe0,0x09,0x35,0x3d,0x34,0xa8,0x3e,0x49,0xc6,0x81,0xe2,0x00,0xce,0x84,0x01,0xf1,0xe0,0x0d,0x37,0xa2,0xea,0x01,0x7f,0x20,0x37,0xa5,0x3f,0xad,0xe8,0x00,0xc7,0x00,0x3f,0x1f,0xa7,0x8e,0xbe,0x0f,0x00,0x00,0xa7,0x0e,0xc7,0x08,0xa7,0x8e,0x3e,0xef,0xe3,0x00,0xc6,0x80,0x26,0xfc,0xe4,0x0f,0x37,0xc8,0x3f,0x6f,0xe0,0x01,0xcf,0x00,0xe2,0x00,0xcf,0x87,0x02,0x04,0xe0,0x00,0x1e,0x8c,0x00,0x8b,0x3e,0xef,0xc6,0xf8,0xe2,0x00,0xce,0x83,0x02,0x84,0xe0,0x00,0x1e,0x8d,0x00,0x83,0xe0,0x00,0x1e,0x8e,0xbf,0x0d,0x00,0x00,0xe0,0x00,0x1e,0x83,0xa7,0x3d,0xc7,0x01,0xbf,0x3d,0xea,0x03,0x7f,0x30,0xe0,0x2f,0xa7,0x7e,0xe0,0x00,0x1f,0x8f,0xbf,0x0f,0x00,0x00,0x38,0x82,0xc0,0x78,0x78,0x82,0x79,0x01,0xe0,0x00,0x19,0x03,0xe0,0x00,0x1f,0x90,0xbf,0x82,0xdd,0xeb,0xe0,0x00,0x1f,0x91,0xbf,0x82,0xe0,0x00,0x19,0x04,0xa7,0x02,0xe0,0x00,0x1f,0x83,0x27,0x0a,0xe0,0x00,0x1f,0x04,0x16,0x81,0xbe,0x9e,0xe0,0x00,0x1f,0x12,0xbf,0x0f,0x00,0x00,0x00,0xff,0xa7,0x1f,0xc7,0x01,0xbf,0x1f,0xdf,0x21,0x00,0xef,0x47,0x43,0x43,0x3a,0x20,0x28,0x47,0x4e,0x55,0x29,0x20,0x34,0x2e,0x37,0x2e,0x31,0x00,0x00,0x2e,0x73,0x68,0x73,0x74,0x72,0x74,0x61,0x62,0x00,0x2e,0x70,0x6d,0x65,0x6d,0x00,0x2e,0x76,0x65,0x63,0x74,0x6f,0x72,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x70,0x65,0x73,0x74,0x61,0x74,0x75,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x67,0x6f,0x74,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x6c,0x69,0x74,0x34,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x62,0x73,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x73,0x74,0x61,0x63,0x6b,0x00,0x2e,0x63,0x6f,0x6d,0x6d,0x65,0x6e,0x74,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0b,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x06,0x00,0x01,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x05,0x12,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x11,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x19,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x80,0x00,0x00,0x10,0x80,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xa0,0x00,0x00,0x10,0xa0,0x00,0x00,0x00,0x14,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x32,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x12,0x00,0x00,0x00,0xb4,0x00,0x00,0x10,0xb4,0x00,0x00,0x00,0x38,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x3d,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0xf0,0x00,0x00,0x10,0xec,0x00,0x00,0x01,0xa8,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x47,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x02,0x98,0x00,0x00,0x12,0x98,0x00,0x00,0x01,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x53,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x25,0x12,0x00,0x00,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x25,0x23,0x00,0x00,0x00,0x5c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
+\ No newline at end of file
+diff --git a/drivers/net/pfe_eth/util_sbl_elf.fw b/drivers/net/pfe_eth/util_sbl_elf.fw
+new file mode 100644
+index 0000000..7a34b86
+--- /dev/null
++++ b/drivers/net/pfe_eth/util_sbl_elf.fw
+@@ -0,0 +1 @@
++0x7f,0x45,0x4c,0x46,0x01,0x02,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x00,0x6f,0x00,0x00,0x00,0x01,0x03,0xf8,0x00,0x00,0x00,0x00,0x00,0x34,0x00,0x00,0x2c,0xd4,0x00,0x04,0x00,0x05,0x00,0x34,0x00,0x20,0x00,0x04,0x00,0x28,0x00,0x0c,0x00,0x0b,0x00,0x00,0x00,0x01,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x5c,0x00,0x00,0x03,0xb4,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x13,0xb4,0x00,0x00,0x03,0xb4,0x00,0x00,0x03,0xb4,0x00,0x00,0x02,0x00,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x06,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x1f,0x80,0x00,0x00,0x1f,0x80,0x00,0x00,0x1f,0x80,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x04,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x20,0x00,0x03,0xf8,0x00,0x00,0x03,0xf8,0x00,0x00,0x00,0x00,0x0c,0x30,0x00,0x00,0x0c,0x30,0x00,0x00,0x00,0x05,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2a,0x2a,0x2a,0x2a,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x60,0x00,0x00,0x00,0x50,0x00,0x00,0x00,0x6c,0x00,0x00,0x03,0xa0,0x00,0x00,0x01,0xa0,0x00,0x00,0x01,0x5c,0x00,0x00,0x02,0xa0,0x00,0x00,0x00,0x00,0xc1,0x04,0x00,0x00,0xc1,0x05,0x00,0x00,0xc1,0x06,0x00,0x00,0x90,0x02,0x00,0x00,0x90,0x00,0x00,0x00,0x00,0x19,0x00,0x0a,0x00,0x19,0x00,0x00,0x61,0x62,0x63,0x64,0x65,0x66,0x67,0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f,0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77,0x78,0x79,0x7a,0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37,0x38,0x39,0x41,0x42,0x43,0x44,0x45,0x46,0x47,0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f,0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57,0x58,0x59,0x5a,0x0a,0x00,0x00,0x00,0x00,0x00,0xba,0x80,0x00,0x03,0xa8,0x0a,0xfb,0x04,0x69,0x3e,0x00,0x00,0x44,0x45,0x41,0x44,0xc1,0x04,0x00,0x0c,0xc1,0x04,0x00,0x04,0xc1,0x04,0x00,0x08,0xde,0xad,0xbe,0xef,0x66,0x61,0x69,0x6c,0x70,0x61,0x73,0x73,0x81,0x70,0x00,0x04,0x0c,0x80,0x09,0xc4,0x81,0x70,0x06,0x10,0x81,0x70,0x0f,0xa0,0x10,0x00,0x00,0x06,0x81,0x70,0x0f,0xa4,0x40,0x03,0x00,0x17,0x81,0x70,0x0f,0xa8,0x0c,0xbf,0x02,0x11,0x81,0x70,0x0f,0xac,0x81,0x71,0x00,0x04,0x81,0x71,0x00,0x0c,0x69,0x6e,0x69,0x74,0x72,0x75,0x6e,0x20,0x03,0x70,0x00,0x80,0x01,0x71,0x00,0x20,0x03,0x70,0x01,0x40,0x03,0x70,0x01,0xc0,0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97,0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f,0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7,0x03,0x70,0x01,0x80,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0xf8,0x00,0x00,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x03,0xf8,0x00,0x40,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x10,0x80,0x11,0x00,0x11,0x80,0x12,0x00,0x12,0x80,0x13,0x00,0x13,0x80,0x14,0x00,0x14,0x80,0x15,0x00,0x15,0x80,0x16,0x00,0x16,0x80,0x17,0x00,0x17,0x80,0xea,0x00,0xc8,0x00,0xe0,0x0b,0xc8,0x30,0xea,0x00,0xcb,0x80,0xe0,0x00,0xcb,0xa0,0xe0,0x60,0x3c,0x00,0xcc,0x02,0xe0,0x60,0x3c,0x10,0xe0,0x00,0xd4,0xec,0x3a,0x80,0xea,0x00,0xcb,0x80,0xe0,0x3f,0xcb,0xa8,0xb8,0x47,0xb8,0xd7,0xb9,0x67,0xb9,0xf7,0xe0,0x01,0xba,0x07,0xe0,0x01,0xba,0x97,0xe0,0x01,0xbb,0x27,0xe0,0x01,0xbb,0xb7,0xe0,0x01,0xbc,0x47,0xe0,0x01,0xbc,0xd7,0xe0,0x01,0xbd,0x67,0xe0,0x01,0xbd,0xf7,0xe0,0x02,0xbe,0x07,0xe0,0x02,0xbe,0x97,0xe0,0x02,0xbf,0x27,0xe0,0x02,0xbf,0xb7,0xe0,0x60,0x3e,0x09,0xe0,0x60,0x3e,0x8a,0xe0,0x60,0x3f,0x0b,0xe0,0x60,0x3f,0x8c,0xbe,0x07,0xbe,0x97,0xbf,0x27,0xbf,0xb7,0xea,0x00,0xcb,0x80,0xe0,0x00,0xcb,0xa0,0x3c,0x6c,0xe0,0x00,0x00,0x82,0xe0,0x00,0x1f,0x83,0xe0,0x00,0x1f,0x27,0xbf,0x0f,0xbc,0x1f,0xbf,0x0f,0x3a,0x80,0x00,0xff,0xe0,0x00,0x1f,0x85,0xe2,0x07,0xc5,0x7f,0xa7,0xaf,0xe4,0x0b,0x35,0xa0,0x3d,0xca,0xbd,0x9f,0xbc,0xaf,0xe1,0x80,0xbc,0x3f,0x00,0x00,0xa7,0x0f,0xe2,0x00,0xc7,0x01,0x27,0x7d,0x38,0x82,0xe0,0x00,0x1f,0x89,0xa6,0x8f,0x3f,0xed,0xe2,0x00,0xc7,0x81,0x27,0x8e,0xe0,0x00,0x1f,0x85,0xa7,0x0f,0xc7,0x0c,0xa7,0x8e,0xe2,0x00,0xc7,0x81,0x27,0xfd,0x17,0xfe,0x3e,0xdf,0xe0,0x00,0x1f,0x89,0xbe,0x8f,0xe0,0x00,0x1f,0x85,0xe4,0x0b,0x35,0xa0,0xa7,0x8f,0xe2,0x07,0xc5,0x7f,0xe0,0x0a,0x3d,0xca,0xbd,0x1f,0xbc,0xaf,0xbc,0x0f,0x00,0x00,0xe0,0x00,0x1f,0x09,0xa7,0x8e,0xcf,0x81,0xbf,0x8e,0x38,0x82,0xc0,0x7c,0x78,0x81,0x15,0x81,0xe2,0x3f,0xcc,0xff,0x05,0x85,0x3f,0x68,0x15,0x80,0x3c,0x69,0x3c,0xee,0xdf,0xbd,0x60,0x81,0xc0,0x04,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe2,0x00,0xcd,0x04,0x02,0x90,0x3f,0xe8,0xe2,0x00,0xc7,0x83,0x27,0x8c,0x00,0x87,0xe0,0x2f,0x8f,0x79,0xe0,0x2f,0xaf,0x78,0xc7,0x81,0x00,0x82,0x17,0x80,0x3f,0xfa,0x01,0xf8,0x00,0x82,0xdf,0xde,0x60,0x81,0xc0,0x04,0x38,0x82,0xc0,0x7c,0x78,0x81,0x15,0x81,0xe2,0x3f,0xcc,0xff,0x05,0x85,0x3f,0x68,0x15,0x80,0x3c,0x69,0x3c,0xee,0xdf,0xa9,0x60,0x81,0xc0,0x04,0x38,0x82,0xe0,0x0c,0x35,0x45,0x3e,0xec,0x3f,0x69,0x3f,0xe8,0x00,0x94,0xa5,0x8e,0xc6,0xff,0xbd,0x8f,0xa5,0x9e,0xbd,0x9f,0xa5,0xae,0xbd,0xaf,0xa5,0xbe,0xbd,0xbf,0xa5,0xce,0xbd,0xcf,0xa5,0xde,0xbd,0xdf,0xa5,0xee,0xbd,0xef,0xa5,0xfe,0xc7,0x20,0xbd,0xff,0xc7,0xa0,0x2e,0xed,0xe0,0x0f,0x36,0x25,0x3c,0x1f,0x3c,0x9f,0x3f,0xea,0xe2,0x00,0xc7,0x90,0x27,0x8b,0xa7,0x89,0xbf,0x88,0xa7,0x99,0xbf,0x98,0xa7,0xa9,0xbf,0xa8,0xa7,0xb9,0xc4,0x90,0xbf,0xb8,0xc4,0x10,0x3f,0xea,0xe2,0x00,0xc7,0x88,0x27,0x87,0xa7,0x89,0xbf,0x88,0xa7,0x99,0xc4,0x88,0xbf,0x98,0xc4,0x08,0x3f,0xea,0xe2,0x00,0xc7,0x84,0x27,0x85,0xe1,0x80,0xa7,0x99,0xe1,0x80,0xbf,0x98,0x3f,0xea,0xe2,0x00,0xc7,0x82,0x27,0x85,0xe1,0x80,0x9f,0x99,0xe1,0x80,0xb7,0x98,0xe2,0x00,0xc5,0x01,0x25,0x03,0x8f,0x89,0xaf,0x88,0x38,0x82,0xc0,0x7c,0x78,0x81,0x3f,0xe9,0xe2,0x00,0xc7,0x81,0x27,0x87,0x25,0x06,0xe1,0x80,0x8f,0x99,0xc5,0x7f,0xe1,0x80,0xaf,0x98,0x3f,0xe9,0xe2,0x00,0xc7,0x82,0x27,0x89,0xe2,0x00,0xcd,0x01,0x05,0x86,0xe1,0x80,0x9f,0x99,0xc5,0x7e,0xe1,0x80,0xb7,0x98,0xdf,0x9c,0x60,0x81,0xc0,0x04,0x38,0x82,0xe2,0x00,0xcd,0x05,0x05,0x8a,0xe0,0x0e,0x3c,0x1a,0x00,0x8f,0xe0,0x2f,0x8f,0x79,0xe0,0x2f,0xaf,0x78,0xc7,0x81,0x00,0x82,0x17,0x80,0x3f,0xfa,0x01,0xf8,0x38,0x82,0xe1,0x80,0x8f,0x99,0xe1,0x80,0xaf,0x98,0x3f,0xe8,0xe2,0x00,0xc7,0x83,0xe0,0x0a,0x3f,0x28,0x2f,0xf7,0xc0,0x70,0x78,0x84,0x79,0x03,0x79,0x82,0x7a,0x01,0x3f,0xe9,0xe2,0x00,0xc7,0x83,0x3f,0x68,0xe2,0x00,0xcf,0x81,0x01,0x0e,0xe2,0x00,0xcf,0x82,0x01,0x86,0xe1,0x80,0x9e,0x19,0xc5,0x7e,0x17,0x90,0x00,0x90,0xe1,0x80,0x8e,0x19,0xc5,0x7f,0x17,0x98,0x00,0x8b,0x3f,0xe9,0xe1,0x80,0x8e,0x1f,0xc5,0x7d,0x9f,0x8f,0xe4,0x0c,0x36,0x20,0x3e,0x4f,0xc4,0x83,0x17,0x88,0x16,0xa0,0xe0,0x02,0x35,0x45,0x3e,0xaf,0x38,0xe2,0x3d,0xe9,0x00,0xbc,0xa1,0x8b,0x36,0x3f,0xe0,0x04,0x31,0xdd,0xe0,0x0c,0x3a,0x4c,0xbe,0x08,0x31,0xbf,0xc0,0xff,0xa6,0x1b,0xe0,0x04,0x36,0x5d,0xe0,0x03,0x3a,0x43,0xb9,0x98,0x36,0x3f,0xa1,0xab,0xe0,0x04,0x31,0xdd,0xe0,0x0c,0x3a,0x4c,0xbe,0x28,0x31,0xbf,0xa6,0x3b,0xe0,0x04,0x36,0x5d,0xe0,0x03,0x3a,0x43,0xb9,0xb8,0x36,0x3f,0xa1,0xcb,0xe0,0x04,0x31,0xdd,0xe0,0x0c,0x3a,0x4c,0xbe,0x48,0x31,0xbf,0xa6,0x5b,0xe0,0x04,0x36,0x5d,0xe0,0x03,0x3a,0x43,0xb9,0xd8,0x36,0x3f,0xa1,0xeb,0xe0,0x04,0x31,0xdd,0xe0,0x0c,0x3a,0x4c,0xbe,0x68,0x31,0xbf,0xa6,0x7b,0xc5,0xa0,0xe0,0x04,0x36,0x5d,0xe0,0x03,0x3a,0x43,0xb9,0xf8,0xc4,0x20,0x28,0xc5,0xe0,0x0b,0x31,0x25,0x3f,0x1b,0x3c,0x9b,0x3d,0xea,0xe2,0x00,0xc5,0x90,0x25,0x9e,0xa5,0x89,0x36,0x3f,0xe0,0x08,0x35,0xdd,0x3e,0x48,0xbe,0x0e,0x35,0xbf,0xa6,0x19,0xe0,0x08,0x36,0x5d,0xe0,0x0b,0x3c,0x4b,0xbd,0x9e,0x36,0x3f,0xa5,0xa9,0xe0,0x08,0x35,0xdd,0xe0,0x0c,0x3c,0x4c,0xbe,0x2e,0x35,0xbf,0xa6,0x39,0xc4,0x90,0xe0,0x08,0x36,0x5d,0xe0,0x0b,0x3c,0x4b,0xbd,0xbe,0xc7,0x10,0x3d,0xea,0xe2,0x00,0xc5,0x88,0x25,0x91,0xa5,0x89,0x36,0x3f,0xe0,0x08,0x35,0xdd,0xe0,0x0c,0x3c,0x4c,0xbe,0x0e,0x35,0xbf,0xa6,0x19,0xc4,0x88,0xe0,0x08,0x36,0x5d,0xe0,0x0b,0x3c,0x4b,0xbd,0x9e,0xc7,0x08,0x3d,0xea,0xe2,0x00,0xc5,0x84,0x25,0x8b,0xe0,0x0b,0x36,0x3f,0xe1,0x80,0xa6,0x19,0xe0,0x08,0x36,0x5d,0xe0,0x0b,0x3c,0x4b,0xe1,0x80,0xbd,0x9e,0xe2,0x00,0xc5,0x03,0x36,0x3f,0xe2,0x00,0xcd,0x02,0x01,0x0c,0xe2,0x00,0xcd,0x03,0x01,0x0d,0x15,0x80,0xe2,0x00,0xcd,0x01,0x01,0x91,0x8d,0x89,0xe4,0x0b,0x35,0xa8,0x00,0x8d,0x9d,0x89,0xe4,0x0b,0x35,0xa0,0x00,0x89,0x8c,0x29,0x9d,0x89,0x34,0x28,0xe4,0x0b,0x35,0xa0,0xe0,0x0b,0x3c,0x4b,0x00,0x81,0xe0,0x09,0x36,0xc3,0xe0,0x0a,0x3c,0x9a,0xe0,0x0d,0x35,0xdd,0x3e,0xcc,0x3e,0x6a,0xe2,0x00,0xc6,0x04,0x26,0x05,0xe1,0x80,0xbe,0x9e,0xe0,0x0d,0x35,0xbf,0x3f,0xea,0xe2,0x00,0xc7,0x82,0x27,0x87,0xe4,0x0f,0x36,0xc0,0xe1,0x80,0xb7,0x9e,0xe4,0x0d,0x36,0xa0,0xe2,0x00,0xc5,0x01,0x25,0x04,0xe4,0x0d,0x36,0xc8,0xae,0x8e,0x60,0x84,0x61,0x03,0x61,0x82,0x62,0x01,0xc0,0x10,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe2,0x0f,0x3c,0xc8,0xe2,0x00,0xc7,0x83,0x2f,0x83,0xde,0xd4,0x00,0x82,0xde,0xee,0x60,0x81,0xc0,0x04,0x38,0x82,0xc0,0x54,0x78,0x86,0x79,0x05,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0x3a,0x69,0x3a,0xec,0xe2,0x00,0xc2,0x07,0xc2,0xf8,0x7c,0x09,0x39,0xeb,0xe0,0x02,0x3a,0xa4,0x7c,0x8a,0x3b,0x68,0x7d,0x88,0xc1,0x88,0x3d,0x72,0x3f,0xea,0xe2,0x00,0xc3,0x07,0x3c,0x63,0xe0,0x00,0x04,0xcd,0x3c,0xa4,0x3d,0x65,0x7f,0x87,0xde,0x30,0x67,0x08,0xe0,0x09,0x39,0x94,0xe0,0x06,0x3f,0x16,0x3c,0x66,0x3d,0x62,0xdf,0xcd,0x64,0x09,0x3c,0xe6,0x3d,0x62,0xde,0x24,0x63,0x09,0x67,0x87,0x3b,0x12,0x3a,0x1f,0x3f,0xe6,0xe2,0x00,0xc7,0x87,0x3a,0x25,0x7f,0x8b,0xe2,0x00,0xc3,0x03,0x00,0x9c,0x64,0x8a,0x3c,0x63,0x3c,0x92,0x3d,0x65,0xde,0x13,0x64,0x08,0x2b,0x07,0x67,0x0b,0x3c,0xe3,0x3c,0x1e,0x3d,0x65,0xde,0x40,0x00,0x86,0x67,0x8b,0x3c,0xe3,0x3c,0x1f,0x3d,0x65,0xdf,0xab,0x64,0x09,0x64,0x88,0x67,0x0b,0x3c,0x12,0x3c,0x9e,0x3d,0x65,0xdd,0xff,0x3a,0x25,0x39,0x15,0x3a,0x75,0x02,0xe4,0x22,0x26,0x64,0x8a,0x3c,0x63,0x3c,0x92,0x3d,0x64,0xde,0x03,0x67,0x8b,0x63,0x08,0x3c,0xe3,0x3b,0x1f,0x3c,0x66,0x3d,0x64,0xdf,0x93,0x64,0x09,0x3c,0xe6,0x3c,0x12,0x3d,0x64,0x00,0x94,0x64,0x8a,0xe0,0x0a,0x3a,0x1a,0x3c,0xa4,0x7f,0x87,0xdd,0xf1,0x67,0x08,0x67,0x87,0xe0,0x06,0x3f,0x16,0x3d,0x6f,0x3c,0x66,0xe0,0x09,0x39,0x94,0xdf,0x7f,0x67,0x87,0x64,0x09,0x3c,0xe6,0x3d,0x6f,0xdd,0xe3,0x60,0x86,0x61,0x05,0x61,0x84,0x62,0x03,0x62,0x82,0x63,0x01,0xc0,0x2c,0x38,0x82,0xc0,0x60,0x78,0x86,0x79,0x05,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0xe2,0x0f,0x3c,0xc8,0xe2,0x00,0xc7,0x87,0x3b,0x68,0x3f,0x69,0x27,0x84,0xdf,0x70,0xe0,0x00,0x00,0xc8,0x3f,0xe9,0xe2,0x00,0xc7,0x87,0x39,0x6a,0x3a,0x6b,0x3a,0xec,0x11,0x80,0x27,0xb2,0xe0,0x03,0x3e,0x2f,0x3d,0x73,0x3c,0x6b,0x3c,0xaf,0x04,0x90,0x3d,0x6c,0x7f,0x07,0x7f,0x88,0xdd,0xaa,0x67,0x88,0x3c,0x66,0xe0,0x09,0x3a,0x1f,0x3d,0x63,0xdd,0xa4,0x67,0x88,0xe0,0x02,0x3f,0x92,0x39,0x25,0x00,0x9c,0xe0,0x0a,0x3f,0x9a,0x7f,0x07,0x11,0x80,0x7f,0x88,0xdd,0xa7,0x67,0x88,0x3d,0x62,0x3c,0x66,0xe0,0x09,0x3a,0x1f,0xdd,0xa1,0x11,0x00,0x00,0x8e,0xe0,0x09,0x3f,0x13,0x3c,0x64,0x3d,0x65,0x7f,0x07,0xdd,0x8b,0xe0,0x08,0x3b,0x13,0x3c,0xe4,0x3d,0x65,0xdd,0x86,0x39,0x95,0x39,0x25,0x67,0x07,0x39,0x75,0x02,0xf1,0x21,0x0b,0x3c,0x64,0xe0,0x09,0x3f,0x13,0x3d,0x62,0xdd,0x89,0xe0,0x08,0x3b,0x13,0x3c,0xe4,0x3d,0x62,0xdd,0x84,0x60,0x86,0x61,0x05,0x61,0x84,0x62,0x03,0x62,0x82,0x63,0x01,0xc0,0x20,0x38,0x82,0xc0,0x54,0x78,0x86,0x79,0x05,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0x3f,0xe9,0xe2,0x00,0xc7,0x87,0x3f,0x68,0xe0,0x0d,0x3d,0x9f,0xe2,0x00,0xc7,0x07,0x7e,0x8b,0x3b,0x6c,0xe0,0x3f,0x12,0xff,0x3f,0x7f,0x3a,0x68,0x39,0xe9,0x39,0x6a,0xc3,0x78,0xe1,0x25,0x3a,0xa9,0x01,0xa7,0x00,0xb3,0x22,0x94,0xe0,0x0d,0x3d,0x9e,0x3c,0x6d,0x3c,0xe3,0x3d,0x66,0x7d,0x87,0x7f,0x08,0x7f,0x89,0x7e,0x8a,0xde,0xec,0x66,0x8a,0x3c,0x64,0x3c,0xed,0x3d,0x66,0xdd,0x42,0x65,0x87,0x67,0x08,0x67,0x89,0x00,0x8f,0x64,0x0b,0x3c,0xe3,0x3d,0x66,0x7d,0x87,0x7f,0x08,0x7f,0x89,0xdd,0x37,0x64,0x8b,0x3c,0x64,0x3d,0x66,0xde,0xd8,0x67,0x89,0x67,0x08,0x65,0x87,0x39,0x26,0x39,0x96,0x3a,0x16,0x39,0x76,0x02,0xda,0x21,0x17,0x22,0x8c,0xe0,0x05,0x3d,0x9e,0x3c,0x65,0x3c,0xe3,0x3d,0x62,0xde,0xc8,0x3c,0x64,0x3c,0xe5,0x3d,0x62,0xdd,0x2d,0x00,0x8b,0xe0,0x05,0x3d,0x9f,0x3c,0x65,0x3c,0xe3,0x3d,0x62,0xdd,0x26,0x3c,0x64,0x3c,0xe5,0x3d,0x62,0xde,0xb9,0x60,0x86,0x61,0x05,0x61,0x84,0x62,0x03,0x62,0x82,0x63,0x01,0xc0,0x2c,0x38,0x82,0xc0,0x6c,0x78,0x85,0x79,0x04,0x79,0x83,0x7a,0x02,0x7a,0x81,0xc6,0x7d,0x3a,0xe9,0x3d,0x7c,0x39,0xea,0xe2,0x00,0xc2,0x83,0x11,0x00,0x02,0x92,0xe0,0x04,0x3d,0x95,0x39,0x68,0x3c,0x64,0xdd,0x79,0x3f,0xe2,0xe2,0x00,0xc7,0x83,0x3f,0xf5,0x3c,0x62,0x3c,0xe4,0x3d,0x63,0x01,0x83,0xdd,0x70,0x00,0x83,0xdd,0x8a,0x00,0x81,0x3c,0x62,0x60,0x85,0x61,0x04,0x61,0x83,0x62,0x02,0x62,0x81,0xc0,0x14,0x38,0x82,0xe0,0x0a,0x3c,0x1a,0x00,0x83,0xe1,0x80,0xac,0x98,0x3c,0x7a,0x01,0xfd,0x38,0x82,0xe0,0x00,0x1f,0x28,0xa7,0x8e,0xe2,0x00,0xc7,0x81,0x27,0xfd,0x38,0x82,0xc0,0x5c,0x78,0x86,0x79,0x05,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0xe0,0x00,0x1a,0x89,0x3a,0x68,0xa7,0x85,0x39,0xe9,0xe2,0x00,0xc7,0x81,0x39,0x6a,0x27,0x89,0x7d,0x87,0xdf,0xe8,0xa7,0x05,0x17,0xfe,0xe0,0x0f,0x3f,0x5f,0xbf,0x85,0x65,0x87,0xe2,0x01,0xc9,0x00,0xe0,0x00,0x1f,0xa9,0xe0,0x00,0x1b,0x2a,0xeb,0x82,0xca,0x84,0x05,0x9b,0x3f,0x63,0xe0,0x01,0x16,0x80,0xe2,0x00,0xc7,0x07,0xe0,0x0e,0x3e,0xae,0x3e,0xe2,0xe4,0x0c,0x35,0xa0,0xe2,0x07,0xc6,0xff,0xe0,0x0d,0x3e,0x4d,0xbe,0x8f,0xb9,0x86,0xba,0x05,0x00,0x00,0x39,0x2e,0x7d,0x87,0x3a,0x1e,0x7f,0x88,0x39,0x9e,0xdf,0xc1,0x67,0x88,0x65,0x87,0xe4,0x0b,0x35,0xa0,0x3e,0xeb,0xe0,0x01,0xce,0x80,0x3a,0x23,0x00,0x90,0xbe,0x8f,0xb9,0x86,0xbf,0x05,0x00,0x00,0xe1,0xff,0xc1,0x00,0x7d,0x87,0xe0,0x01,0xc1,0x80,0x7e,0x89,0x7f,0x88,0xdf,0xac,0x67,0x88,0x66,0x89,0x65,0x87,0xe0,0x0e,0x3a,0x13,0xe2,0x01,0xc9,0x00,0x02,0xed,0xe0,0x0b,0x39,0x4b,0xbd,0x8f,0xb9,0x86,0xbf,0x05,0x00,0x00,0xe0,0x00,0x19,0x09,0xa7,0x82,0xcf,0x81,0xbf,0x82,0xdf,0x98,0xa7,0x02,0x17,0xfe,0xe0,0x0f,0x3f,0x5f,0xbf,0x82,0x60,0x86,0x61,0x05,0x61,0x84,0x62,0x03,0x62,0x82,0x63,0x01,0xc0,0x24,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe0,0x00,0x1f,0x2b,0xe8,0x00,0x67,0x92,0xe0,0x00,0x1c,0x08,0xbf,0x1f,0xe0,0x02,0x15,0x00,0xe8,0x00,0x64,0x90,0xef,0xff,0xdd,0xfe,0xe8,0x00,0x64,0x0f,0xe0,0x00,0x1c,0x86,0xe1,0xfe,0xc4,0x00,0xe0,0x00,0x15,0x40,0xef,0xff,0xdd,0xf4,0xe8,0x00,0x64,0x8f,0xe8,0x00,0x64,0x10,0xe1,0xfe,0xc4,0x80,0xe0,0x00,0x15,0x40,0xef,0xff,0xdd,0xea,0xe0,0x00,0x1c,0x0a,0xe8,0x00,0x64,0x90,0xe0,0x02,0x15,0x00,0xef,0xff,0xdd,0xe2,0xe0,0x00,0x1f,0x06,0xe0,0x00,0x1e,0x8a,0x17,0x80,0xe0,0x2f,0x8d,0xfe,0xe0,0x2f,0x8e,0x7d,0x3d,0xfc,0x01,0x08,0xe0,0x00,0x1f,0x2c,0xe0,0x00,0x1f,0x83,0xbf,0x0f,0x17,0x01,0x00,0x8b,0xc7,0x81,0xe2,0x00,0xcf,0xc0,0x01,0xf0,0xe0,0x00,0x1f,0x2d,0xe0,0x00,0x1f,0x83,0xbf,0x0f,0x17,0x00,0xe8,0x00,0x67,0x92,0xbf,0x1f,0x60,0x81,0xc0,0x04,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe8,0x00,0x67,0x92,0xe0,0x00,0x1f,0x2b,0xe0,0x00,0x1c,0x84,0xbf,0x1f,0xe1,0x6e,0x16,0x80,0xe0,0x00,0x1f,0xae,0xe0,0x00,0x1d,0xaf,0xa7,0x8f,0xbf,0x89,0xe1,0x2f,0x3f,0x8d,0xe0,0x00,0x1e,0xb0,0x3e,0x6f,0xa6,0x8d,0xce,0x02,0xbe,0x99,0x3e,0xfb,0xe0,0x00,0x1e,0xb1,0xe0,0x00,0x1d,0xb2,0xa6,0x8d,0xe0,0x6f,0x39,0xac,0xbe,0xa9,0x3e,0xfb,0xe0,0x00,0x1e,0xb3,0x3e,0x6f,0xa6,0x8d,0xe0,0x00,0x1d,0xb4,0xbe,0xb9,0xce,0x04,0xe0,0x6f,0x39,0xac,0x3e,0xfb,0xe0,0x00,0x1e,0xb5,0x3e,0x6f,0xa6,0x8d,0xce,0x08,0xe0,0x00,0x1d,0xb6,0xbe,0xc9,0xe0,0x6f,0x39,0xac,0x3e,0x6f,0x3e,0xfb,0xe0,0x00,0x1e,0xb7,0xce,0x10,0xa6,0x8d,0xe0,0x6f,0x39,0xac,0x3e,0x6f,0xbe,0xd9,0xce,0x20,0xeb,0x02,0xcd,0xf1,0xbf,0x0b,0xe2,0xcf,0xce,0xff,0xe0,0x6f,0x39,0xac,0x00,0x00,0xe0,0x00,0x1e,0x38,0x16,0x80,0xbe,0x8c,0x00,0x00,0xe0,0x00,0x1e,0xb9,0xe0,0x02,0x15,0x00,0xbd,0x0d,0x00,0x00,0x3d,0x6f,0xa5,0x8b,0xcd,0x40,0xbd,0xe9,0x3d,0xfe,0xe0,0x6f,0x39,0xaa,0xa7,0x0c,0x3e,0x6f,0xbf,0x79,0xe0,0x01,0xce,0x00,0xe2,0x00,0xcf,0x00,0xa7,0x0d,0xe0,0x6f,0x39,0xac,0x3e,0xef,0xe0,0x01,0xbf,0x09,0xe2,0x02,0xcf,0x00,0xe0,0x02,0xce,0x80,0xe8,0x00,0x67,0x12,0xe0,0x6f,0x39,0xad,0xbf,0x9e,0x15,0x20,0xe8,0x00,0x64,0x11,0xef,0xff,0xdd,0x48,0x60,0x81,0xc0,0x04,0x38,0x82,0xc0,0x7c,0x78,0x81,0xdf,0x36,0xe8,0x00,0x66,0x92,0xe0,0x00,0x1f,0x83,0xa7,0x1f,0xc7,0x01,0xbf,0x1f,0xa7,0x0d,0xc7,0x01,0xbf,0x0d,0xa7,0x2f,0xc7,0x01,0xbf,0x2f,0x00,0xf7,0x38,0x82,0xc0,0x7c,0x78,0x81,0xe0,0x00,0x1f,0x83,0xe0,0x00,0x1f,0x3a,0xbf,0x0f,0xe0,0x00,0x1f,0x3b,0xbf,0x0f,0xdf,0xe4,0xc0,0x64,0x79,0x05,0x39,0x60,0xc1,0x1c,0x78,0x86,0x79,0x84,0x7a,0x03,0x7a,0x82,0x7b,0x01,0xea,0x02,0xcf,0xf0,0xa7,0x1f,0x3b,0x60,0xe8,0x00,0xcf,0x01,0xc0,0x70,0xbf,0x1f,0x3a,0x60,0xc2,0x0b,0x32,0x43,0x32,0x23,0x00,0x00,0xe0,0x02,0xa7,0x7f,0xcf,0x0f,0xe0,0x02,0xbf,0x7f,0x00,0x00,0x17,0x00,0xea,0x06,0xcf,0xf0,0xbf,0x04,0xea,0x06,0xcc,0x70,0xbf,0x94,0x14,0x80,0xe0,0x00,0x19,0x87,0xe0,0x01,0x15,0x00,0xbc,0x03,0xea,0x02,0xca,0xf1,0xbc,0x93,0xef,0xff,0xde,0x71,0x3c,0x65,0x3c,0xe4,0x15,0x08,0xef,0xff,0xdc,0xf5,0x16,0x90,0xbe,0xb5,0x00,0x00,0xe0,0x00,0x1f,0xbc,0x17,0x00,0xbf,0x04,0x15,0x00,0xbf,0x94,0x14,0x80,0xe0,0x00,0x1c,0x3c,0xbd,0x33,0xe0,0x01,0x15,0x40,0xbc,0x23,0xbe,0x82,0xef,0xff,0xde,0x59,0xe0,0x00,0x1c,0x3d,0x3c,0xe4,0x15,0x08,0xef,0xff,0xdc,0xdc,0xa6,0x82,0xe0,0x01,0xbe,0xb5,0x00,0x00,0xe0,0x00,0x1c,0x3e,0xea,0x01,0x7c,0x90,0x15,0x0c,0xef,0xff,0xdc,0xd1,0xe0,0x00,0x1f,0xbf,0xe0,0x00,0x1f,0x40,0x16,0x81,0xbf,0x2f,0x16,0x00,0xe0,0x00,0x1f,0x41,0xbe,0x0f,0x14,0x80,0xbf,0x3f,0x15,0x83,0xe0,0x00,0x1f,0x42,0xbe,0x9f,0xe0,0x00,0x16,0x70,0xbf,0x4f,0x15,0x78,0xe0,0x00,0x1f,0x43,0xbf,0x5f,0xe0,0x00,0x1f,0x44,0xbf,0x6f,0xe0,0x00,0x1f,0x45,0xbf,0x7f,0xe0,0x00,0x1f,0x46,0xe0,0x01,0xbf,0x0f,0xe0,0x00,0x1f,0x47,0xe0,0x01,0xbf,0x1f,0xe0,0x00,0x1f,0x48,0xe0,0x01,0xbf,0x2f,0xe0,0x00,0x1f,0x49,0xe0,0x01,0xbf,0x3f,0xe0,0x00,0x1f,0x4a,0xe0,0x01,0xbf,0x4f,0xe0,0x00,0x1f,0x4b,0xe0,0x01,0xbf,0x5f,0xe0,0x00,0x1f,0x4c,0xe0,0x01,0xbf,0x6f,0xe0,0x00,0x1f,0x4d,0xe0,0x01,0xbf,0x7f,0xe7,0xff,0x17,0x30,0xe0,0x00,0x1f,0xce,0xaf,0x0f,0xe7,0xff,0x17,0x03,0xaf,0x1f,0x17,0x18,0xaf,0x2f,0x17,0x0b,0xaf,0x3f,0xe0,0x00,0x17,0x40,0xac,0xcf,0xac,0xdf,0xac,0xef,0xac,0xff,0xe0,0x01,0xad,0x4f,0x15,0x09,0xe0,0x01,0xac,0xef,0xe0,0x01,0xac,0xff,0xe0,0x01,0xad,0x8f,0xe0,0x01,0xae,0x1f,0xe0,0x01,0xae,0xaf,0xe0,0x01,0xaf,0x3f,0xe0,0x01,0xaf,0x5f,0xe0,0x02,0xad,0x8f,0xe0,0x02,0xae,0x1f,0xe0,0x02,0xac,0xcf,0xe0,0x02,0xac,0xdf,0x14,0x88,0xe0,0x02,0xac,0xef,0x14,0x80,0xe0,0x02,0xac,0xff,0x14,0xf0,0xe0,0x02,0xad,0x2f,0x15,0x40,0xe0,0x03,0xac,0x8f,0x14,0x80,0xe0,0x02,0xad,0x3f,0xe0,0x03,0xaf,0x1f,0xe0,0x03,0xac,0xaf,0xe0,0x03,0xac,0xbf,0xe0,0x03,0xad,0xcf,0xe0,0x03,0xae,0x5f,0xe0,0x03,0xae,0xef,0xe0,0x03,0xad,0x7f,0xe0,0x04,0xac,0x8f,0xe0,0x04,0xac,0x9f,0xe0,0x04,0xac,0xaf,0xe0,0x04,0xaf,0x3f,0xa7,0xd5,0x27,0x96,0xa6,0x13,0xa7,0x83,0x36,0x23,0xe0,0x0c,0x3f,0x9c,0xe0,0x00,0x1f,0xce,0x17,0x00,0xbf,0x0c,0xbf,0x9c,0xbe,0xf5,0x00,0x00,0xe0,0x01,0xa7,0xf5,0x2f,0xfe,0x17,0x01,0xea,0x02,0xcf,0xf1,0xe0,0x01,0xbf,0x5f,0x00,0x00,0x38,0x66,0x60,0x86,0x61,0x05,0x61,0x84,0x62,0x03,0x62,0x82,0x63,0x01,0xc0,0x1c,0x38,0x82,0x70,0x66,0x65,0x5f,0x31,0x32,0x5f,0x30,0x32,0x5f,0x31,0x2d,0x31,0x34,0x2d,0x67,0x36,0x33,0x36,0x61,0x65,0x61,0x35,0x2d,0x64,0x69,0x72,0x74,0x79,0x00,0x47,0x43,0x43,0x3a,0x20,0x28,0x47,0x4e,0x55,0x29,0x20,0x34,0x2e,0x37,0x2e,0x31,0x00,0x00,0x2e,0x73,0x68,0x73,0x74,0x72,0x74,0x61,0x62,0x00,0x2e,0x64,0x64,0x72,0x5f,0x74,0x65,0x78,0x74,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x70,0x65,0x73,0x74,0x61,0x74,0x75,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x67,0x6f,0x74,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x73,0x64,0x61,0x74,0x61,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x6c,0x69,0x74,0x34,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x62,0x73,0x73,0x00,0x2e,0x64,0x6d,0x65,0x6d,0x5f,0x73,0x74,0x61,0x63,0x6b,0x00,0x2e,0x76,0x65,0x63,0x74,0x6f,0x72,0x00,0x2e,0x76,0x65,0x72,0x73,0x69,0x6f,0x6e,0x00,0x2e,0x63,0x6f,0x6d,0x6d,0x65,0x6e,0x74,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x0b,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x06,0x03,0xf8,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x0c,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x15,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x20,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x10,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x24,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x20,0x00,0x00,0x10,0x20,0x00,0x00,0x00,0x2c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x2e,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x50,0x00,0x00,0x10,0x50,0x00,0x00,0x00,0x6c,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3a,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x12,0x00,0x00,0x00,0xbc,0x00,0x00,0x10,0xbc,0x00,0x00,0x00,0xa0,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x45,0x00,0x00,0x00,0x08,0x00,0x00,0x00,0x03,0x00,0x00,0x01,0x5c,0x00,0x00,0x11,0x5c,0x00,0x00,0x02,0x58,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x4f,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x03,0xb4,0x00,0x00,0x13,0xb4,0x00,0x00,0x02,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x5b,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x02,0x00,0x00,0x1f,0x80,0x00,0x00,0x1f,0x80,0x00,0x00,0x00,0x28,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x63,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,0xff,0x00,0x00,0x00,0x00,0x00,0x2c,0x30,0x00,0x00,0x00,0x1e,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x04,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x6c,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x4e,0x00,0x00,0x00,0x11,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x2c,0x5f,0x00,0x00,0x00,0x75,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x01,0x00,0x00,0x00,0x00,
+\ No newline at end of file
+diff --git a/include/configs/ls1012a_common.h b/include/configs/ls1012a_common.h
+index 07ef7c6..3c4ab6c 100644
+--- a/include/configs/ls1012a_common.h
++++ b/include/configs/ls1012a_common.h
+@@ -109,6 +109,16 @@
+ #define CONFIG_CMD_PING
+ #undef CONFIG_CMD_IMLS
+ 
++/*  PPFE */
++#define CONFIG_FSL_PPFE
++
++#ifdef CONFIG_FSL_PPFE
++#define CONFIG_CMD_PFE_START 
++#define CONFIG_CMD_PFE_COMMANDS
++#define CONFIG_UTIL_PE_DISABLED
++
++#endif
++
+ 
+ #define CONFIG_ARCH_EARLY_INIT_R
+ 
+diff --git a/include/configs/ls1012aqds.h b/include/configs/ls1012aqds.h
+index 488811b..1fa7b6f 100644
+--- a/include/configs/ls1012aqds.h
++++ b/include/configs/ls1012aqds.h
+@@ -14,16 +14,14 @@
+ #define CONFIG_CHIP_SELECTS_PER_CTRL	1
+ #define CONFIG_NR_DRAM_BANKS		2
+ 
+-#ifdef CONFIG_SYS_DPAA_FMAN
+-#define CONFIG_FMAN_ENET
++#ifdef CONFIG_FSL_PPFE
++/*#define CONFIG_CMD_PFE_START */
++#define EMAC1_PHY_ADDR          0x1e
++#define EMAC2_PHY_ADDR          0x1
+ #define CONFIG_PHYLIB
+ #define CONFIG_PHY_VITESSE
+ #define CONFIG_PHY_REALTEK
+-#define RGMII_PHY1_ADDR		0x1
+-#define SGMII_CARD_PORT1_PHY_ADDR 0x1C
+-#define SGMII_CARD_PORT2_PHY_ADDR 0x1D
+-#define SGMII_CARD_PORT3_PHY_ADDR 0x1E
+-#define SGMII_CARD_PORT4_PHY_ADDR 0x1F
++#define RGMII_RESET_WA
+ #endif
+ 
+ /*  MMC  */
+@@ -142,6 +140,7 @@
+ #define I2C_VOL_MONITOR_BUS_V_OVF      0x1
+ #define I2C_VOL_MONITOR_BUS_V_SHIFT    3
+ 
++
+ /* DSPI */
+ #define CONFIG_FSL_DSPI
+ #define CONFIG_FSL_DSPI1
+diff --git a/include/configs/ls1012ardb.h b/include/configs/ls1012ardb.h
+index 1629e19..1b72bf1 100644
+--- a/include/configs/ls1012ardb.h
++++ b/include/configs/ls1012ardb.h
+@@ -19,10 +19,12 @@
+ #define CONFIG_SYS_MEMTEST_START	0x80000000
+ #define CONFIG_SYS_MEMTEST_END		0x9fffffff
+ 
++#ifdef CONFIG_FSL_PPFE
++#define EMAC1_PHY_ADDR          0x2
++#define EMAC2_PHY_ADDR          0x1
+ #define CONFIG_PHYLIB
+ #define CONFIG_PHY_REALTEK
+-#define SGMII_PHY1_ADDR		0x0
+-#define RGMII_PHY2_ADDR		0x1
++#endif
+ 
+ /*
+ * USB
+-- 
+1.7.9.5
+