aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-rockchip/patches
diff options
context:
space:
mode:
authorDavid Bauer <mail@david-bauer.net>2020-09-28 17:55:21 +0200
committerDavid Bauer <mail@david-bauer.net>2020-09-30 00:06:45 +0200
commitbda6f6572be630bcf9a1c8a429e40d8a53033af5 (patch)
tree3dd50b55b2545bf3aecee55612b5cb7fb1727a1b /package/boot/uboot-rockchip/patches
parentcba4120768a39c9ff222734dce2ced43b70bd60c (diff)
downloadupstream-bda6f6572be630bcf9a1c8a429e40d8a53033af5.tar.gz
upstream-bda6f6572be630bcf9a1c8a429e40d8a53033af5.tar.bz2
upstream-bda6f6572be630bcf9a1c8a429e40d8a53033af5.zip
uboot-rockchip: update NanoPi R2S patches
Update the patches required for the NanoPi R2S to match the DTS accepted for upstream Linux. The U-Boot patch meanwhile is still pending upstream. Signed-off-by: David Bauer <mail@david-bauer.net>
Diffstat (limited to 'package/boot/uboot-rockchip/patches')
-rw-r--r--package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch289
1 files changed, 174 insertions, 115 deletions
diff --git a/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch b/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
index bc65fb69ef..ddda146935 100644
--- a/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
+++ b/package/boot/uboot-rockchip/patches/100-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R.patch
@@ -1,4 +1,4 @@
-From 67f4c228c2bf515386cd54073104dc2e6eae85ea Mon Sep 17 00:00:00 2001
+From 64d37d74519eb5d4dcff8e9164d18f524aa72c8d Mon Sep 17 00:00:00 2001
From: David Bauer <mail@david-bauer.net>
Date: Fri, 10 Jul 2020 14:58:30 +0200
Subject: [PATCH] rockchip: rk3328: Add support for FriendlyARM NanoPi R2S
@@ -17,11 +17,11 @@ WAN - LAN - SYS LED
Signed-off-by: David Bauer <mail@david-bauer.net>
---
arch/arm/dts/Makefile | 1 +
- arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 34 +++
- arch/arm/dts/rk3328-nanopi-r2s.dts | 334 +++++++++++++++++++++
+ arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi | 40 +++
+ arch/arm/dts/rk3328-nanopi-r2s.dts | 387 +++++++++++++++++++++
board/rockchip/evb_rk3328/MAINTAINERS | 7 +
configs/nanopi-r2s-rk3328_defconfig | 99 ++++++
- 5 files changed, 475 insertions(+)
+ 5 files changed, 534 insertions(+)
create mode 100644 arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
create mode 100644 arch/arm/dts/rk3328-nanopi-r2s.dts
create mode 100644 configs/nanopi-r2s-rk3328_defconfig
@@ -38,7 +38,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
rk3328-rock-pi-e.dtb
--- /dev/null
+++ b/arch/arm/dts/rk3328-nanopi-r2s-u-boot.dtsi
-@@ -0,0 +1,34 @@
+@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * (C) Copyright 2018-2019 Rockchip Electronics Co., Ltd
@@ -73,9 +73,15 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+&vcc_sd {
+ u-boot,dm-spl;
+};
++
++&gmac2io {
++ snps,reset-active-low;
++ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
++ snps,reset-delays-us = <0 10000 50000>;
++};
--- /dev/null
+++ b/arch/arm/dts/rk3328-nanopi-r2s.dts
-@@ -0,0 +1,334 @@
+@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2020 David Bauer <mail@david-bauer.net>
@@ -88,92 +94,103 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+#include "rk3328.dtsi"
+
+/ {
-+ model = "FriendlyARM NanoPi R2S";
++ model = "FriendlyElec NanoPi R2S";
+ compatible = "friendlyarm,nanopi-r2s", "rockchip,rk3328";
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
-+ gmac_clkin: external-gmac-clock {
++ gmac_clk: gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
-+ clock-output-names = "gmac_clkin";
++ clock-output-names = "gmac_clk";
+ #clock-cells = <0>;
+ };
+
-+ vcc_sd: sdmmc-regulator {
-+ compatible = "regulator-fixed";
-+ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
++ keys {
++ compatible = "gpio-keys";
++ pinctrl-0 = <&reset_button_pin>;
+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0m1_gpio>;
-+ regulator-name = "vcc_sd";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ vin-supply = <&vcc_io>;
-+ };
+
-+ vcc_sdio: sdmmcio-regulator {
-+ compatible = "regulator-gpio";
-+ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
-+ enable-active-high;
-+ states = <1800000 0x1
-+ 3300000 0x0>;
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdio_vcc_pin>;
-+ regulator-always-on;
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <3300000>;
-+ regulator-name = "vcc_sdio";
-+ regulator-settling-time-us = <5000>;
-+ regulator-type = "voltage";
-+ vin-supply = <&vcc_io>;
++ reset {
++ label = "reset";
++ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
++ linux,code = <KEY_RESTART>;
++ debounce-interval = <50>;
++ };
+ };
+
-+ vcc_sys: vcc-sys {
++ vcc_rtl8153: vcc-rtl8153-regulator {
+ compatible = "regulator-fixed";
-+ regulator-name = "vcc_sys";
++ gpio = <&gpio2 RK_PC6 GPIO_ACTIVE_HIGH>;
++ pinctrl-names = "default";
++ pinctrl-0 = <&rtl8153_en_drv>;
+ regulator-always-on;
-+ regulator-boot-on;
++ regulator-name = "vcc_rtl8153";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
++ enable-active-high;
+ };
+
+ leds {
+ compatible = "gpio-leds";
-+
++ pinctrl-0 = <&lan_led_pin>, <&sys_led_pin>, <&wan_led_pin>;
+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins>;
-+
-+ sys {
-+ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
-+ label = "nanopi-r2s:red:sys";
-+ };
+
-+ lan {
++ lan_led: led-0 {
+ gpios = <&gpio2 RK_PB7 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:lan";
+ };
+
-+ wan {
++ sys_led: led-1 {
++ gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>;
++ label = "nanopi-r2s:red:sys";
++ };
++
++ wan_led: led-2 {
+ gpios = <&gpio2 RK_PC2 GPIO_ACTIVE_HIGH>;
+ label = "nanopi-r2s:green:wan";
+ };
+ };
+
-+ gpio_keys {
-+ compatible = "gpio-keys-polled";
-+ poll-interval = <100>;
++ vcc_io_sdio: sdmmcio-regulator {
++ compatible = "regulator-gpio";
++ enable-active-high;
++ gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
++ pinctrl-0 = <&sdio_vcc_pin>;
++ pinctrl-names = "default";
++ regulator-name = "vcc_io_sdio";
++ regulator-always-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <3300000>;
++ regulator-settling-time-us = <5000>;
++ regulator-type = "voltage";
++ startup-delay-us = <2000>;
++ states = <1800000 0x1
++ 3300000 0x0>;
++ vin-supply = <&vcc_io_33>;
++ };
+
++ vcc_sd: sdmmc-regulator {
++ compatible = "regulator-fixed";
++ gpio = <&gpio0 RK_PD6 GPIO_ACTIVE_LOW>;
++ pinctrl-0 = <&sdmmc0m1_gpio>;
+ pinctrl-names = "default";
-+ pinctrl-0 = <&button_pins>;
++ regulator-name = "vcc_sd";
++ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++ vin-supply = <&vcc_io_33>;
++ };
+
-+ reset {
-+ label = "Reset Button";
-+ gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
-+ linux,code = <KEY_RESTART>;
-+ debounce-interval = <50>;
-+ };
++ vdd_5v: vdd-5v {
++ compatible = "regulator-fixed";
++ regulator-name = "vdd_5v";
++ regulator-always-on;
++ regulator-boot-on;
++ regulator-min-microvolt = <5000000>;
++ regulator-max-microvolt = <5000000>;
+ };
+};
+
@@ -195,19 +212,16 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+
+&gmac2io {
+ assigned-clocks = <&cru SCLK_MAC2IO>, <&cru SCLK_MAC2IO_EXT>;
-+ assigned-clock-parents = <&gmac_clkin>, <&gmac_clkin>;
++ assigned-clock-parents = <&gmac_clk>, <&gmac_clk>;
+ clock_in_out = "input";
-+ phy-supply = <&vcc_io>;
+ phy-handle = <&rtl8211e>;
+ phy-mode = "rgmii";
-+ pinctrl-names = "default";
++ phy-supply = <&vcc_io_33>;
+ pinctrl-0 = <&rgmiim1_pins>;
++ pinctrl-names = "default";
++ rx_delay = <0x18>;
+ snps,aal;
-+ snps,reset-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
-+ snps,reset-active-low;
-+ snps,reset-delays-us = <0 10000 50000>;
+ tx_delay = <0x24>;
-+ rx_delay = <0x18>;
+ status = "okay";
+
+ mdio {
@@ -215,8 +229,13 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+ #address-cells = <1>;
+ #size-cells = <0>;
+
-+ rtl8211e: ethernet-phy@0 {
-+ reg = <0>;
++ rtl8211e: ethernet-phy@1 {
++ reg = <1>;
++ pinctrl-0 = <&eth_phy_reset_pin>;
++ pinctrl-names = "default";
++ reset-assert-us = <10000>;
++ reset-deassert-us = <50000>;
++ reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
@@ -224,35 +243,36 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+&i2c1 {
+ status = "okay";
+
-+ rk805: rk805@18 {
++ rk805: pmic@18 {
+ compatible = "rockchip,rk805";
+ reg = <0x18>;
-+ interrupt-parent = <&gpio2>;
-+ interrupts = <6 IRQ_TYPE_LEVEL_LOW>;
++ interrupt-parent = <&gpio1>;
++ interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
+ #clock-cells = <1>;
+ clock-output-names = "xin32k", "rk805-clkout2";
+ gpio-controller;
+ #gpio-cells = <2>;
-+ pinctrl-names = "default";
+ pinctrl-0 = <&pmic_int_l>;
++ pinctrl-names = "default";
+ rockchip,system-power-controller;
+ wakeup-source;
+
-+ vcc1-supply = <&vcc_sys>;
-+ vcc2-supply = <&vcc_sys>;
-+ vcc3-supply = <&vcc_sys>;
-+ vcc4-supply = <&vcc_sys>;
-+ vcc5-supply = <&vcc_io>;
-+ vcc6-supply = <&vcc_sys>;
++ vcc1-supply = <&vdd_5v>;
++ vcc2-supply = <&vdd_5v>;
++ vcc3-supply = <&vdd_5v>;
++ vcc4-supply = <&vdd_5v>;
++ vcc5-supply = <&vcc_io_33>;
++ vcc6-supply = <&vdd_5v>;
+
+ regulators {
-+ vdd_logic: DCDC_REG1 {
-+ regulator-name = "vdd_logic";
++ vdd_log: DCDC_REG1 {
++ regulator-name = "vdd_log";
++ regulator-always-on;
++ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
-+ regulator-always-on;
-+ regulator-boot-on;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
@@ -261,11 +281,12 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+
+ vdd_arm: DCDC_REG2 {
+ regulator-name = "vdd_arm";
++ regulator-always-on;
++ regulator-boot-on;
+ regulator-min-microvolt = <712500>;
+ regulator-max-microvolt = <1450000>;
+ regulator-ramp-delay = <12500>;
-+ regulator-always-on;
-+ regulator-boot-on;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <950000>;
@@ -276,17 +297,19 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ };
+ };
+
-+ vcc_io: DCDC_REG4 {
-+ regulator-name = "vcc_io";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
++ vcc_io_33: DCDC_REG4 {
++ regulator-name = "vcc_io_33";
+ regulator-always-on;
+ regulator-boot-on;
++ regulator-min-microvolt = <3300000>;
++ regulator-max-microvolt = <3300000>;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <3300000>;
@@ -295,10 +318,11 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+
+ vcc_18: LDO_REG1 {
+ regulator-name = "vcc_18";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
@@ -307,10 +331,11 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+
+ vcc18_emmc: LDO_REG2 {
+ regulator-name = "vcc18_emmc";
-+ regulator-min-microvolt = <1800000>;
-+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ regulator-boot-on;
++ regulator-min-microvolt = <1800000>;
++ regulator-max-microvolt = <1800000>;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1800000>;
@@ -319,10 +344,11 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+
+ vdd_10: LDO_REG3 {
+ regulator-name = "vdd_10";
-+ regulator-min-microvolt = <1000000>;
-+ regulator-max-microvolt = <1000000>;
+ regulator-always-on;
+ regulator-boot-on;
++ regulator-min-microvolt = <1000000>;
++ regulator-max-microvolt = <1000000>;
++
+ regulator-state-mem {
+ regulator-on-in-suspend;
+ regulator-suspend-microvolt = <1000000>;
@@ -330,38 +356,55 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+ };
+ };
+ };
++
++ usb {
++ rtl8153_en_drv: rtl8153-en-drv {
++ rockchip,pins = <2 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++ };
+};
+
+&io_domains {
-+ status = "okay";
-+
-+ vccio1-supply = <&vcc_io>;
++ pmuio-supply = <&vcc_io_33>;
++ vccio1-supply = <&vcc_io_33>;
+ vccio2-supply = <&vcc18_emmc>;
-+ vccio3-supply = <&vcc_sdio>;
++ vccio3-supply = <&vcc_io_sdio>;
+ vccio4-supply = <&vcc_18>;
-+ vccio5-supply = <&vcc_io>;
-+ vccio6-supply = <&vcc_io>;
-+ pmuio-supply = <&vcc_io>;
++ vccio5-supply = <&vcc_io_33>;
++ vccio6-supply = <&vcc_io_33>;
++ status = "okay";
+};
+
+&pinctrl {
-+ leds {
-+ led_pins: led-pins {
-+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>,
-+ <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>,
-+ <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
++ button {
++ reset_button_pin: reset-button-pin {
++ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
-+ button {
-+ button_pins: button-pins {
-+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>;
++ ethernet-phy {
++ eth_phy_reset_pin: eth-phy-reset-pin {
++ rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
++ };
++ };
++
++ leds {
++ lan_led_pin: lan-led-pin {
++ rockchip,pins = <2 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ sys_led_pin: sys-led-pin {
++ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
++ };
++
++ wan_led_pin: wan-led-pin {
++ rockchip,pins = <2 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ pmic {
+ pmic_int_l: pmic-int-l {
-+ rockchip,pins = <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>;
++ rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
+ };
+ };
+
@@ -372,16 +415,22 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+ };
+};
+
++&pwm2 {
++ status = "okay";
++};
++
+&sdmmc {
+ bus-width = <4>;
-+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
-+ max-frequency = <150000000>;
++ pinctrl-0 = <&sdmmc0_clk>, <&sdmmc0_cmd>, <&sdmmc0_dectn>, <&sdmmc0_bus4>;
+ pinctrl-names = "default";
-+ pinctrl-0 = <&sdmmc0_clk &sdmmc0_cmd &sdmmc0_dectn &sdmmc0_bus4>;
++ sd-uhs-sdr12;
++ sd-uhs-sdr25;
++ sd-uhs-sdr50;
++ sd-uhs-sdr104;
+ vmmc-supply = <&vcc_sd>;
-+ vqmmc-supply = <&vcc_sdio>;
++ vqmmc-supply = <&vcc_io_sdio>;
+ status = "okay";
+};
+
@@ -391,16 +440,25 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+ status = "okay";
+};
+
-+&uart2 {
++&u2phy {
+ status = "okay";
+};
+
-+&u2phy {
++&u2phy_host {
+ status = "okay";
++};
+
-+ u2phy_host: host-port {
-+ status = "okay";
-+ };
++&u2phy_otg {
++ status = "okay";
++};
++
++&uart2 {
++ status = "okay";
++};
++
++&usb20_otg {
++ status = "okay";
++ dr_mode = "host";
+};
+
+&usb_host0_ehci {
@@ -410,6 +468,7 @@ Signed-off-by: David Bauer <mail@david-bauer.net>
+&usb_host0_ohci {
+ status = "okay";
+};
++
--- a/board/rockchip/evb_rk3328/MAINTAINERS
+++ b/board/rockchip/evb_rk3328/MAINTAINERS
@@ -5,6 +5,13 @@ F: board/rockchip/evb_rk3328