aboutsummaryrefslogtreecommitdiffstats
path: root/package/boot/uboot-sunxi
diff options
context:
space:
mode:
authorZoltan Herpai <wigyori@uid0.hu>2015-12-22 13:04:31 +0000
committerZoltan Herpai <wigyori@uid0.hu>2015-12-22 13:04:31 +0000
commit0f18228a3af47704813698a1fdf5f9ebd3e0242d (patch)
tree390d48731768aeb299615c2d746b3f3080c6251d /package/boot/uboot-sunxi
parent2a0e1b7f8d59f795abb29d20007822f0da232c43 (diff)
downloadupstream-0f18228a3af47704813698a1fdf5f9ebd3e0242d.tar.gz
upstream-0f18228a3af47704813698a1fdf5f9ebd3e0242d.tar.bz2
upstream-0f18228a3af47704813698a1fdf5f9ebd3e0242d.zip
packages: bump uboot-sunxi to enable H3 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu> SVN-Revision: 47959
Diffstat (limited to 'package/boot/uboot-sunxi')
-rw-r--r--package/boot/uboot-sunxi/Makefile14
-rw-r--r--package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff285
-rw-r--r--package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff (renamed from package/boot/uboot-sunxi/patches/003-add-olimex-a13-som.diff)3
-rw-r--r--package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch42
4 files changed, 14 insertions, 330 deletions
diff --git a/package/boot/uboot-sunxi/Makefile b/package/boot/uboot-sunxi/Makefile
index b08f9ed1df..8471bb3cf4 100644
--- a/package/boot/uboot-sunxi/Makefile
+++ b/package/boot/uboot-sunxi/Makefile
@@ -9,13 +9,13 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=u-boot
-PKG_VERSION:=2015.07
+PKG_VERSION:=2016.01-rc2
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
PKG_SOURCE_URL:= \
http://mirror2.openwrt.org/sources \
ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=3dac9a0b46fed77fc768ad3bd2d68c05
+PKG_MD5SUM:=aca6c7a38534812ab529e90aae976422
PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -66,6 +66,10 @@ define uboot/Cubietruck
TITLE:=U-Boot for Cubietruck
endef
+define uboot/Hummingbird_A31
+ TITLE:=U-Boot for the Hummingbird A31 board
+endef
+
define uboot/Mele_M9
TITLE:=U-Boot for the Mele M9 (A31)
endef
@@ -86,6 +90,10 @@ define uboot/Lamobo_R1
TITLE:=U-Boot for Lamobo R1
endef
+define uboot/orangepi_plus
+ TITLE:=U-Boot for Orange Pi Plus (H3)
+endef
+
UBOOTS:= \
A10-OLinuXino-Lime \
A13-OLinuXino \
@@ -96,11 +104,13 @@ UBOOTS:= \
Cubieboard \
Cubieboard2 \
Cubietruck \
+ Hummingbird_A31 \
Mele_M9 \
OLIMEX_A13_SOM \
Linksprite_pcDuino \
Linksprite_pcDuino3 \
Lamobo_R1 \
+ orangepi_plus
define Package/uboot/template
define Package/uboot-sunxi-$(1)
diff --git a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff b/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
deleted file mode 100644
index 0f7196fc11..0000000000
--- a/package/boot/uboot-sunxi/patches/002-add-lamobo-r1.diff
+++ /dev/null
@@ -1,285 +0,0 @@
-diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
-index 9c735c6..a32d772 100644
---- a/arch/arm/dts/Makefile
-+++ b/arch/arm/dts/Makefile
-@@ -103,6 +103,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
- sun7i-a20-ainol-aw1.dtb \
- sun7i-a20-bananapi.dtb \
- sun7i-a20-bananapro.dtb \
-+ sun7i-a20-lamobo-r1.dtb \
- sun7i-a20-cubieboard2.dtb \
- sun7i-a20-cubietruck.dtb \
- sun7i-a20-hummingbird.dtb \
-diff --git a/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-new file mode 100644
-index 0000000..a77fb5c
---- /dev/null
-+++ b/arch/arm/dts/sun7i-a20-lamobo-r1.dts
-@@ -0,0 +1,231 @@
-+/*
-+ * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * Hans de Goede <hdegoede@redhat.com>
-+ *
-+ * This file is dual-licensed: you can use it either under the terms
-+ * of the GPL or the X11 license, at your option. Note that this dual
-+ * licensing only applies to this file, and not this project as a
-+ * whole.
-+ *
-+ * a) This file is free software; you can redistribute it and/or
-+ * modify it under the terms of the GNU General Public License as
-+ * published by the Free Software Foundation; either version 2 of the
-+ * License, or (at your option) any later version.
-+ *
-+ * This file is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * Or, alternatively,
-+ *
-+ * b) Permission is hereby granted, free of charge, to any person
-+ * obtaining a copy of this software and associated documentation
-+ * files (the "Software"), to deal in the Software without
-+ * restriction, including without limitation the rights to use,
-+ * copy, modify, merge, publish, distribute, sublicense, and/or
-+ * sell copies of the Software, and to permit persons to whom the
-+ * Software is furnished to do so, subject to the following
-+ * conditions:
-+ *
-+ * The above copyright notice and this permission notice shall be
-+ * included in all copies or substantial portions of the Software.
-+ *
-+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
-+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
-+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
-+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
-+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
-+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
-+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
-+ * OTHER DEALINGS IN THE SOFTWARE.
-+ */
-+
-+/dts-v1/;
-+#include "sun7i-a20.dtsi"
-+#include "sunxi-common-regulators.dtsi"
-+
-+#include <dt-bindings/gpio/gpio.h>
-+#include <dt-bindings/interrupt-controller/irq.h>
-+#include <dt-bindings/pinctrl/sun4i-a10.h>
-+
-+/ {
-+ model = "Lamobo Banana Pi R1";
-+ compatible = "lemaker,bananapi", "allwinner,sun7i-a20";
-+
-+ aliases {
-+ serial0 = &uart0;
-+ serial1 = &uart3;
-+ serial2 = &uart7;
-+ };
-+
-+ chosen {
-+ stdout-path = "serial0:115200n8";
-+ };
-+
-+ leds {
-+ compatible = "gpio-leds";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&led_pins_bananapi>;
-+
-+ green {
-+ label = "bananapi:green:usr";
-+ gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
-+ };
-+ };
-+
-+ reg_gmac_3v3: gmac-3v3 {
-+ compatible = "regulator-fixed";
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_power_pin_bananapi>;
-+ regulator-name = "gmac-3v3";
-+ regulator-min-microvolt = <3300000>;
-+ regulator-max-microvolt = <3300000>;
-+ startup-delay-us = <100000>;
-+ enable-active-high;
-+ gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
-+ };
-+};
-+
-+&ahci {
-+ status = "okay";
-+};
-+
-+&ehci0 {
-+ status = "okay";
-+};
-+
-+&ehci1 {
-+ status = "okay";
-+};
-+
-+&gmac {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&gmac_pins_rgmii_a>;
-+ phy = <&phy1>;
-+ phy-mode = "rgmii";
-+ phy-supply = <&reg_gmac_3v3>;
-+ status = "okay";
-+
-+ phy1: ethernet-phy@1 {
-+ reg = <1>;
-+ };
-+};
-+
-+&i2c0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c0_pins_a>;
-+ status = "okay";
-+
-+ axp209: pmic@34 {
-+ compatible = "x-powers,axp209";
-+ reg = <0x34>;
-+ interrupt-parent = <&nmi_intc>;
-+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
-+
-+ interrupt-controller;
-+ #interrupt-cells = <1>;
-+ };
-+};
-+
-+&i2c2 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&i2c2_pins_a>;
-+ status = "okay";
-+};
-+
-+&ir0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&ir0_rx_pins_a>;
-+ status = "okay";
-+};
-+
-+&mmc0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>;
-+ vmmc-supply = <&reg_vcc3v3>;
-+ bus-width = <4>;
-+ cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
-+ cd-inverted;
-+ status = "okay";
-+};
-+
-+&ohci0 {
-+ status = "okay";
-+};
-+
-+&ohci1 {
-+ status = "okay";
-+};
-+
-+&pio {
-+ mmc0_cd_pin_bananapi: mmc0_cd_pin@0 {
-+ allwinner,pins = "PH10";
-+ allwinner,function = "gpio_in";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+ gmac_power_pin_bananapi: gmac_power_pin@0 {
-+ allwinner,pins = "PH23";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ led_pins_bananapi: led_pins@0 {
-+ allwinner,pins = "PH24";
-+ allwinner,function = "gpio_out";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
-+ };
-+
-+ ir0_tx_pins_a: ir0@1 {
-+ allwinner,pins = "PB3";
-+ allwinner,function = "ir0";
-+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
-+ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>;
-+ };
-+
-+};
-+
-+&reg_usb1_vbus {
-+ status = "okay";
-+};
-+
-+&reg_usb2_vbus {
-+ status = "okay";
-+};
-+
-+&spi0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&spi0_pins_a>,
-+ <&spi0_cs0_pins_a>,
-+ <&spi0_cs1_pins_a>;
-+ status = "okay";
-+};
-+
-+&uart0 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart0_pins_a>;
-+ status = "okay";
-+};
-+
-+&uart3 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart3_pins_b>;
-+ status = "okay";
-+};
-+
-+&uart7 {
-+ pinctrl-names = "default";
-+ pinctrl-0 = <&uart7_pins_a>;
-+ status = "okay";
-+};
-+
-+&usbphy {
-+ usb1_vbus-supply = <&reg_usb1_vbus>;
-+ usb2_vbus-supply = <&reg_usb2_vbus>;
-+ status = "okay";
-+};
-diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
-index 7a42055..abf2c1c 100644
---- a/board/sunxi/MAINTAINERS
-+++ b/board/sunxi/MAINTAINERS
-@@ -30,6 +30,7 @@ F: include/configs/sun7i.h
- F: configs/A20-OLinuXino_MICRO_defconfig
- F: configs/Bananapi_defconfig
- F: configs/Bananapro_defconfig
-+F: configs/Lamobo_R1_defconfig
- F: configs/i12-tvbox_defconfig
- F: configs/Linksprite_pcDuino3_defconfig
- F: configs/Linksprite_pcDuino3_fdt_defconfig
-diff --git a/configs/Lamobo_R1_defconfig b/configs/Lamobo_R1_defconfig
-new file mode 100644
-index 0000000..bf665e7
---- /dev/null
-+++ b/configs/Lamobo_R1_defconfig
-@@ -0,0 +1,17 @@
-+CONFIG_ARM=y
-+CONFIG_ARCH_SUNXI=y
-+CONFIG_MACH_SUN7I=y
-+CONFIG_DRAM_CLK=432
-+CONFIG_GMAC_TX_DELAY=4
-+CONFIG_DEFAULT_DEVICE_TREE="sun7i-a20-lamobo-r1"
-+CONFIG_SPL=y
-+CONFIG_SYS_EXTRA_OPTIONS="AXP209_POWER,SUNXI_GMAC,RGMII,MACPWR=SUNXI_GPH(23),AHCI,USB_EHCI"
-+CONFIG_ETH_DESIGNWARE=y
-+# CONFIG_CMD_IMLS is not set
-+# CONFIG_CMD_FLASH is not set
-+# CONFIG_CMD_FPGA is not set
-+CONFIG_DM_SERIAL=y
-+CONFIG_USB=y
-+CONFIG_DM_USB=y
-+CONFIG_NETDEVICES=y
-+CONFIG_NET=y
diff --git a/package/boot/uboot-sunxi/patches/003-add-olimex-a13-som.diff b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff
index e160b3da10..a8c5b3d938 100644
--- a/package/boot/uboot-sunxi/patches/003-add-olimex-a13-som.diff
+++ b/package/boot/uboot-sunxi/patches/002-add-olimex-a13-som.diff
@@ -1,7 +1,7 @@
diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig
--- u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig 1970-01-01 01:00:00.000000000 +0100
+++ u-boot-2015.01/configs/OLIMEX_A13_SOM_defconfig 2015-01-18 16:25:11.908986082 +0100
-@@ -0,0 +1,15 @@
+@@ -0,0 +1,16 @@
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=2,NO_AXP,USB_EHCI"
+CONFIG_DEFAULT_DEVICE_TREE="sun5i-a13-olinuxino"
@@ -17,3 +17,4 @@ diff -ruN u-boot-2015.01.old/configs/OLIMEX_A13_SOM_defconfig u-boot-2015.01/con
+CONFIG_DM_SERIAL=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
++CONFIG_SYS_NS16550=y
diff --git a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
deleted file mode 100644
index 964aa577b1..0000000000
--- a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
+++ /dev/null
@@ -1,42 +0,0 @@
-diff --git a/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
-new file mode 100644
-index 0000000..180b60b
---- /dev/null
-+++ b/package/boot/uboot-sunxi/patches/004-sunxi-mmc-set-transfer-timeout-according-to-byte_cnt.patch
-@@ -0,0 +1,36 @@
-+From 8a5481e2e51a86e858c4f1481729421f26cc240c Mon Sep 17 00:00:00 2001
-+From: Yousong Zhou <yszhou4tech@gmail.com>
-+Date: Sat, 29 Aug 2015 21:26:11 +0800
-+Subject: [PATCH] sunxi: mmc: set transfer timeout according to byte_cnt.
-+
-+Originally a timeout value of 2 seconds was used regardless of the size
-+of data to be transfered. This prevented slow devices from working
-+correctly while there was no much gain for faster devices, e.g. it takes
-+3708ms for a transfer of uImage of size 1899008 bytes.
-+
-+Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
-+---
-+ drivers/mmc/sunxi_mmc.c | 6 ++++--
-+ 1 file changed, 4 insertions(+), 2 deletions(-)
-+
-+diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
-+index e7ab828..7a990f7 100644
-+--- a/drivers/mmc/sunxi_mmc.c
-++++ b/drivers/mmc/sunxi_mmc.c
-+@@ -257,9 +257,11 @@ static int mmc_trans_data_by_cpu(struct mmc *mmc, struct mmc_data *data)
-+ const uint32_t status_bit = reading ? SUNXI_MMC_STATUS_FIFO_EMPTY :
-+ SUNXI_MMC_STATUS_FIFO_FULL;
-+ unsigned i;
-+- unsigned byte_cnt = data->blocksize * data->blocks;
-+- unsigned timeout_msecs = 2000;
-+ unsigned *buff = (unsigned int *)(reading ? data->dest : data->src);
-++ unsigned byte_cnt = data->blocksize * data->blocks;
-++ unsigned timeout_msecs = byte_cnt >> 8;
-++ if (timeout_msecs < 2000)
-++ timeout_msecs = 2000;
-+
-+ /* Always read / write data through the CPU */
-+ setbits_le32(&mmchost->reg->gctrl, SUNXI_MMC_GCTRL_ACCESS_BY_AHB);
-+--
-+1.7.10.4
-+